Ford: what farmers say
1638 reports in FARM SHOW · 1328 Best Buys316 Worst Buys
Ford (general)
214 Best Buys48 Worst Buys“In 1978 I bought a used 1954 Allis Chalmers WD45 tractor with a stuck engine. I replaced the valves and rings and added a live belt-driven hydraulic pump, power steering, and New Idea front-end loader. I still use this tractor almost every day. I replaced the rear tires with 18.4 by 26 tires with fluid, so it really pulls good.
“We also own a 1976 Ford 9600 tractor with no cab and a 1978 Allis Chalmers 7020 with cab that we bought about 18 years ago. Very few problems with either tractor. These tractors don’t use oil and start right up every time.
“Over the years I worked for several different companies where I drove newer model pickups including Ford, Chevrolet and Dodge. However, they all seemed to have minor but irritating problems so now I always buy used models, primarily Fords. I drove a 1978 Ford F-150 4-WD until it had about 396,800 miles, and now I’m driving a 1999 4-WD Ford that has more than 197,000 miles on it but still runs good.”
“My 2006 Deere X500 riding mower has never been in the shop and still has the original belts, tires and battery. It pays to buy the best.
“After selling my 1999 Chevrolet 3/4-ton pickup I felt like a new truck would be a good idea. Ford had great deals in 2009 when everyone else was having money problems. So I bought a new Ford F-250 pickup. However, it got only 9 mpg and lacked the power to tow my trailer and tractor. So a year later I sold it and bought an old 1998 Chevrolet 1/2-ton, 4-WD shortbed model with about 107,000 miles. It still runs like a top.”
“We have several different brands of trucks on our farm, but Ford is the best. We own Ford pickups, Broncos, and vans, and all have performed great. We also have several old Ford farm trucks that are still as dependable as ever. It’s no wonder Fords have been the best built and best selling trucks for 28 years and running.
“As far as larger tractors go, we’ve had the best luck with our older White models. They’re simple, reliable, rugged and economical machines. Regarding smaller tractors we have the best luck with Fords. It’s a shame to see so many previous companies amalgamated into only a few large companies today.
“Our Fordson Major diesel has 8,614 hours on it and is still going strong.
“Our Deere tractors have always had minor problems. Deere’s service is superb and I like their next-day parts service, but their tractors just seem to have a lot of leaks, start hard, and are also hard to work on, etc. They’re good tractors but not the best on the market.
“We’ve had good luck with Gleaner combines in the past, but I believe the best combines made today are the tried and true Case IH Axial Flow models. They’re simple, reliable, and easy to update. Parts for them are common and they work smoothly and efficiently. We love our Case IH Axial Flow combine.”
“I like Ford products in general. On any given weekend, when our family gets together, you’ll see at least 10 or 12 Ford vehicles sitting in our yard. My folks bought a 1949 Ford brand new and we still have it.”
Leo likes his 1988 Ford 1910 but says he wishes there was a place to store a toolbox. “It could also use different style headlights. The ones on it aren’t much good with a front-end loader.”
William Davis, Sheridan, Ind.: “My Ford Lincoln Town Car runs smooth and gets 20 mpg in local driving which think is excellent. It has a lot of power and a great engine.”
Edwin Ruff, Moses Lake, Wash.: “I have a 1990 Ford Ranger with a club cab and a 4-liter V-6 engine. I get 22 mpg on the road and have pulled a trailer with approximately 2,000 Ibs, over a mountain pass with no effort. It has 32,000 miles on it and I've had no trouble with it, It handles well and is a joy to drive.”
Dean Werner, Jamestown, Penn: "My 1989 Ford Ranger supercab pickup has over 117,000 miles on it with few repairs. It rides comfortably and still drives nice and tight, “My 1993 Ford Escort station wagon is my worst buy. The automatic transmission went out at 40,000 miles, just after the 36,000 mile warranty, It took three weeks to repair and cost us $800. My dealer refused to provide a loaner car, Six weeks later the transmission went out again and the car was laid up for another week. Two weeks later we traded it for a new Chevrolet Lumina.”
Dean Werner, Jamestown, Penn.: "My 1989 Ford Ranger supercab pickup has over 117,000 miles on it with few repairs. It rides comfortably and still drives nice and tight, “My 1993 Ford Escort station wagon is my worst buy, The automatic transmission went out at 40,000 miles, just after the 36,000 mile warranty, It took three weeks to repair and cost us $800. My dealer refused to provide a loaner car, Six weeks later the transmission went out again and the car was laid up for another week. Two weeks later we traded it for a new Chevrolet Lumina.”
Alton Lerwick, Lyman, Neb.: “My worst buy is my 1990 Ford F-350 4-WD pickup equipped with a 7.3-liter diesel engine. It has 58,000 miles on it. The trouble began when the clutch went out at about 20,000 miles. The company said that was ‘normal wear and tear’ and wouldn't cover it under their 60,000 mile drivetrain warranty. Since then the clutch has gone out again, the clutch master cylinder has been replaced twice, and the power steering has been repaired three times. It’s gone through three starters, four alternators, and five sets of batteries and the transfer case has been rebuilt three times. The rear seals leaked and ruined the rear brakes, The radiator fins are so close together that nothing can pass through them. As a result, the screen plugs up and has to be removed and cleaned on a regular basis, The pickup frame broke on one side and now paint is peeling off the hood. I’m a real skeptic whenever I see Fords advertised as ‘Ford tough,’ “My Deere 535 round baler is reliable. The bales start easy and are solid.”
David Westerlund, Osco, I.: David's “well satisfied” with the Ford Ranger pickups he's bought over the years. “I’ ve owned 1986, 1988, 1989, and 1990 XLT models, all equipped with 4-cyl., 2.3-liter gas engines, and can’t fault any of them, Other than routine maintenance I've spent only about $50 on repairs over the last 10 years. They're easy on fuel and have quiet cabs. They also have better resale value than competitive models.”
Larry Timm, Union City, Mich.: “ve owned all colors of 4-WD tractors over the years, but the one I’m proudest of is my 1995 Ford-Versatile 9480, It's a hybrid of the best technology offered by Versatile and Ford. I wouldn't hesitate to buy another one.” On the “worst buy” side, Larry lists his 1994 Ford F-250 pickup. “It rides well and is dependable but isn’t built heavy enough for farm work. It seems to me that any pickup lighter than one ton is only a glorified car.”
Tim Ward, Missouri Valley, lowa: “My 1979 Ford F-150 4-WD pickup, which I bought used in 1985, still runs like new. I've used it to haul 4,000 Ibs. while at the same time towing a 12,000-Ib, trailer load. No problems, It’s really made me a believer in Ford.”
Dennis Poulsen, Snowville, Utah: “We've had tremendous problems with our D-2000 Ford-New Holland big square baler and we haven't been able to get any satisfaction from the company,” says Dennis. “Pm a commercial hay producer and the reason we bought this baler was because it makes smaller 3 by 4 by 8-ft. bales that weigh about 1,300 Ibs., which lets you get more bales on the same amount of semi trailer space. The problem is that the baler has never worked right from the beginning. I can’t get enough weight into the bales and it's supposed to tie with 5 strings but we're lucky if we get 4 and it’s usually 3. Hay buyers aren't too impressed when they look at your bales and a third of them are broken apart. “This is the second D-2000 I’ve had. Ford-New Holland replaced the first one but now they won't do anything. I know personally of one commercial grower who turned two of these balers back over to Ford and I’ve heard of others. This baler is no longer in production. I’ve been a long-term ‘Hay buyers aren't too impressed when they look at your bales and a third of them are broken apart.” Ford customer - pickups, tractors, and a lot of other equipment, I didn’t think I'd have a problem with the company but I'm very disappointed with this situation. This baler doesn't work and think the company knows it. But they won't help.”
Mark Hoesly, Ladysmith, Wis.: Mark says a pair of Pro-Quality hay baskets that unload by gravity out the back, head his “best buy” list (Pro-Quality Corp., Box 6184, St. Cloud, Minn. 56302). “They work as advertised and are huge labor-savers. My dad and I put up over 12,000 hay bales for our cows each year, as well as straw bales. The baskets are less expensive and more reliable than a thrower and thrower racks. “My Ford tractors are all best buys. I have a 1953 NAA, 1961 901, 1975 7000, 1977 7600, and 1980 4600, All are fuel efficient and reliable. The 7000 and 7600 never use more than 4 gal. of fuel per hour, and the clutch on the 7000 lasted over 8,000 hours,”
Russell D. Ellerhoff, Sperry, lowa: “It has all the pep I need and goes 70 miles per hour,” reports Russell, pleased with his 1992 Ford Tempo 4-door car. “It's a pleasure to drive. It gets 30 mpg on the highway.
Rick Wallace, Shelburne, Ontario: “My Posi Lock gear puller is an excellent product. It's well made and is a must for any farm or business. “Pederson vise grips are a time-tested, superior tool. They work better than any copy cat model and deserve an award. (Peterson Mfg., 108 S, Pear, DeWitt, Neb. 68341 ph 402 683-2325). “On the worst buy side nominate my 199] Ford F-150 pickup. The paint is falling off it and the dealer won't help. I've written directly to the company with no results. [even sent them a copy of the story FARM SHOW published regarding paint peeling off Ford pickups. I'll never buy another Ford again.”
Harry E. Nye, Union City, Penn.: “Our 1989 Ford van has over 80,000 miles and is a best buy. Our 1994 Ford Crown Victoria has over 21,000 miles and has never been back to the dealer,”
Joseph Swennen, Bedford, Quebec: Joseph likes his 1993 GMC 3500 1-ton 4WD pickup equipped with a 6.5 liter turbo diesel engine. “Neither Ford nor Dodge could offer me a I-ton pickup that rides as smooth as my GMC.” Robert D. Campbell, Eagle Grove, Iowa; “My 1992 Chevrolet K-10 with 6,2 liter diesel engine gets up to 24 mpg and gives an excellent ride. I've got 33,000 trouble-free miles on it. It uses no oil.”
Don Rich, Oxford, Conn.; Don's favorite pickup is his 1994 Ford Super Duty 4 Best, Worst P WD equipped with a 460 cu. in, engine and 5-speed transmission with 2-speed auxiliary transmission. “It's more powerful than any other pickup I've ever driven, It's fuel efficient with the auxiliary transmission, which helps make it the best vehicle I’ve ever used for towing. My only complaint is that wish Ford would offer a black interior.”
Barbara Gattis, Cedar Creek, Texas: “We've gotten 23 years of service out of this pickup. It looks as great today as the day my dad bought it.” “My 1993 -ton Ford pickup equipped with a 7.3 liter diesel engine has been nothing but trouble. The steering system is a problem and it has no pulling power. I'm dissatisfied with almost everything about it. On the other hand, my 9-year-old Chevrolet pickup has tons of miles on it and I’ve never had one major problem with it.”
Earl K. Bankston, Natalbany, La.: Earl likes his 1991 Ford F-350 pickup but doesn’t like an on-going problem with the paint. “It was only two years old when the paint peeled off the top and one fender. I felt Ford should have repainted it but the company refused because the warranty had expired.”
C. Sherman Allen, Conneaut Lake, Pa.: He’s had a problem with the 1993 Ford F-350 equipped with 7.3 liter diesel “Tt was only two years old when the paint peeled off the top and one fender.” engine and 5-speed transmission he bought new - and the extended service plan he bought for $1,545. He's contacted the Ford Motor Company of Ohio, his local Better Business Bureau, and the Pennsylvania attorney general's office about it. “The problem was that last May, a rod that fastens to the clutch pedal broke. I soon discovered that the part could not be purchased separately, but only with the clutch hydraulic sleeve cylinder and reservoir. And the repair was not covered by my extended service plan, “First, this is utterly ridiculous to have to pay $65.48 or more when all I need is this rod. Also, the part did not wear out, it suddenly broke into three pieces, which could be a safety concern for Ford since owners might not be able to stop their trucks in time if this rod breaks. Why isn’t . this repair covered under my extended war) ranty program?”
Marshall Hemmes, Humbolt, Minn.: A 1990 Ford-Versatile 876 4-WD tractor heads Marshall's “best buy” list. “It’s fast and powerful and controls are easy to reach.”
Earl West, Gladstone, Mo.: “One of my all-time best buys was a 1984 Ford Ranger 2-WD pickup equipped with V-6 gas engine. I drove the truck 144,000 miles with no engine or brake trouble. I sold it at my farm sale for $4,000 three years ago, The new owner now has 177,000 miles on the truck and it's still going strong.”
O.R. York, Wildwood, Alta.: “I put a Fish carburetor on a 391 Ford engine ina 125 Versatile tractor. when I first installed the carburetor, it ran well atan idle for 1S min. Then it started running rich and kept on that way regardless of any adjustments After installing a new carburetor from Princess Auto, the tractor ran perfectly. [learned a $575 lesson.”
Lyman L. Nuss, Dorrance, Kan.: “I'm very pleased with my 1993 Ford-Versatile 846 tractor. I like the instrumentation, er Is Their “Best Buy” another tractor or loader for unloading. Bale cradles on each side dump at once simply by pulling a lever, “It’s very heavy-duty,” says Loehrer. “The trame is made out of 6 by 5-in. steel beam and it has dual wheels on each side to support the weight it’s carrying.” Contact: FARM SHOW Followup, Bert or William Loehrer, R.R. 1, Box 129, Milbank, S, Dak. 57252 (ph 605 432-5783 or 4342). handling, and power.”
Ken Vogel, Weyburn, Sask.: “My worst buy is a Fish carburetor. Loverhauled a motor and put the carburetor on it, Now the motor surges all the time and is harder on gas than with the old 2-barrel carburetor. It has more low-end torque but less power overall. I've talked to a dealer in the States but no one seems to care. “My 1986 Versatile 836 4-WD tractor is a best buy. It now has 2.100 hrs, and is still in like new condition. It starts extremely well, has good power, and is stingy on fuel. I liked this tractor so much that in 19901 bought a new Ford Versatile 846 and 1 now have 1,500 hrs. on that tractor.[t's just as good as the 836."
Neil Fleischhacker, Humboldt, Sask.: Neil's pleased with his 1994 Ford Genesis tractor with FWA, “Most new products have some bugs that have to be worked out but we put over 400 hrs, on this tractor the first year without a stop. The tractor is quiet, comfortable, and handles like a dream. Ford was good to work with in regards to leasing, I'd buy another one in a minute,” On the minus side, he's disappointed with his 1994 GMC 3/4-ton 4-WD 6.5 turbo diesel. “In the first three months of operation, it had to be towed back to the dealer six times. Part of the problem was the dealer didn’t know enough to change the tue! pump, which is a problem on 6.5 turbo diesels. After changing the computer, lift pump, all filters, and tearing the fuel tank out to look for dirt, he finally changed the fuel pump and our problem was solved.”
Ed Staudt, Vibank, Sask.: The only complaint Ed has about his 1988 Ford Ranger XLT equipped with a V-6 engine, 5-speed manual transmission, air, condiUioning, cruise control and tilt steering wheel, is that he doesn’t get to drive it enough. “It has over 98,000 miles on it and all it’s ever needed was regularly scheduled maintenance and tires, It handles great and consistently gets me 28 mpg. I only wish my wife wouldn't always use it so I could drive it more,”
Edward Tomlinson, Marion, Va.: A 1994 4630 Ford equipped with shuttle shifl transmission is one of Ed’s best buys. “The tractor has a lot more power than the 4610 I traded for it and it’s easy to get on and off. The transmission is extremely smooth, but may be a bit too noisy for some.”
Frank Allen, Kenton, Tenn.: Frank's more than pleased with the Chevrolet Silverado 4-WD pickup he bought new in 1993. It now has 30,000 miles. “It drives and rides like a Cadillac with plenty of head and shoulder room. Its 350 cu. in. engine is extremely powerful and gets better than 18 mpg, almost twice what my old Ford 4-WD pickup got. I'll never buy another Ford. “My worst buy was a Case-IH Magnum 7130 tractor equipped with front-wheel-assist. The hydraulics are a joke. The power lift leaks down while the tractor is in operation. You have to push the lift lever down and then pull it back up to reset it, It sometimes blows the hose end out of the outlets when lifting an implement. The engine had to be overhauled at 2,000 hours, It drives and rides like a log wagon compared to Deere tractors I’ve owned.”
David Barhan, Askoy, Minn.: “The tire carrier on my Ford F-150 is a joke here in Minnesota. All the salt they put on our roads in the winter rusted the bolts tight in a couple of years. I cut the old ones off and bought new ones, They cost $10 apiece. Ford engineers should know the bolts should have been stainless steel.” Poly Wire electric fence wire heads David's best huy list. “I practice rotational grazing and the stuff works great for temporary fences. It’s plastic twine with fine copper wire braided into it. [trolls out easy and there are no kinks, twists, or snarls. It’s lightweight so need less posts, too. Easy to reel up.”
Robert Gill, Shullsburg, Wis.: “I've owned several Ford pickups and a couple of Chevrolets over the years that were okay, but this is one terrific pickup,” says Robert about his 1994 Dodge Ram 1500 pickup equipped with a 360 cu. in. engine and automatic transmission, “It has 10,000 miles on it. I’ve checked the fuel economy three times and it’s been 18 mpg every time. It rides as well as most cars.”
Rudy Bahr, Gridley, Kan.: “My best buy is my 1993 Dodge Caravan equipped with a 6-cyl. engine. It’s more fun to drive than anything I’ ve owned ever since my first Model A Ford in the 1940's.”
Henry N. Gammon, Providence, N.C.: “My 1992 Dodge Dakota club cab pickup rides as smooth as a car. The 5.2-liter engine has all the power I need and easily pulls a heavy trailer. I traded in my 1988 Chevrolet pickup, which was a real lemon. It had to have new valves, seals, heads, and intake but still blew smoke. It had only 38,000 miles on it.” Wilson Glenn Collins, Maysville, Kent.: “It starts and runs good and is always dependable,” says Wilson, owner of a 1993 Ford F-150 XL pickup equipped with a 4.9liter 6-cyl, engine and 5-speed manual transmission. “It started right up last winter at 30 degrees below zero. We've pulled 10,000-1b. loads with it. Ford makes tough trucks.”
Joe E. Chaffin, Elkhart, Texas: Joe likes his 1979 Ford 1/2-ton 4-WD, long wheel base pickup that he bought used with 60,000 miles. “I bought it to haul hay. It had been used on a Colorado dude ranch, and a kid from Louisiana brought it to Texas. He had mounted four new 5-in. gumbo mudder tires on it and sold it to me for $1,800. It looked like heck because the fenders were all bent up, but it had one of the best drive trains and engines I’ve ever seen in an old Ford pickup. I’ve had it for 5 years. I mounted a 3,500-Ib. winch at the rear that I use to pick up 1,500-Ib, round bales. I’ve moved a lot of bales with it, “Lalso use it for deer hunting and have crossed creeks and sloughs where you wouldn't believe a pickup could go. The only maintenance I’ve done has been to install new brakes and front shock “They don't make pickups like this one anymore.” absorbers. It has almost 100,000 miles on it but still doesn’t use any oil and will climb up a wall. They don’t make pickups like this one any more. My 1994 Ford pickup will never be as good as this one.”
John P. Voigt, South Haven, Kan.: John's the satisfied owner of a 1987 Ford F-250 diesel pickup. “When I bought it Ford used the same exhaust system on both its gas and diesel models. However, the exhaust system had too much back pressure for the diesel engine so I had a new stainless steel exhaust system and a new air cleaner installed. Now the 6.9-liter engine has about the same horsepower as a 7.3-liter engine. The pickup is built heavy and I likeit. “In August 1991 I purchased a new Deere 2355 MFWD tractor equipped with a Deere 245 loader and no cab, It’s the biggest small tractor I've ever owned, I really like how it shifts. I traded a Ford in on it and am glad that I didn’t buy another Ford. One problem is that most Deere dealers order this tractor with economy hydraulic outlets which I had trouble using. I waited until Deere had one of its half price sales, then bought a set of standard plug-ins. “I recently purchased a Deere 7800 MEFWD tractor equipped with a power quad transmission. like the transmission as well as the tractor’s large cab, comfortable seat, and easy-to-fill fuel tank. I traded in a 1988 Deere 4450 MFWD tractor that had 1,100 hours on it. It rode so hard it hurt my back, and it seemed like it was always in the shop for minor repairs.”
Perry J. Deem, Schulenburg, Texas: A 1993 Ford New Holland 465 disc mower is Perry's “best buy”. “In previous years we used sicklebar mowers or haybines to cut hay. But increasing problems with fire ants and Bahia grass has made cutting hay areal headache. This mower slices through both with ease. I'm well pleased with it.”
Wayne Manthey, Big Bend, Wis.: Wayne likes his 1987 Ford F-350 4-WD diesel pickup. “I bought it used in 1989 with 32,000 miles. It now has 169,000 miles with only minor repairs. It still looks good and gets 15 to 20 mpg. It’s the best truck I’ve ever owned. “Our 1993 Great Plains 10-ft. no-till drill pulls and handles much easier than I expected. The seed metering system is accurate and adjustments are simple to rst Buys us page) tors. “I buy Ford tractors because they don't have any repair bills. That saves me a lot of money.”
Thomas Schmidl, Live Oak, Calif.: Thomas likes his Ford 7600 and 6610 tracia 48 rst Buys us page) tors. “I buy Ford tractors because they don't have any repair bills. That saves me a lot of money.”
George Janecek, Washington, Iowa: “My best buy is a 1993 Chevrolet 2500 4WD extended cab pickup equipped with a 6.5-liter turbocharged diesel engine. It has 24,000 miles with no problems. I’ve never driven a pickup with so much power and fuel economy. I get 11 to 12 mpg pulling a trailer, 15 to 16 mpg on short trips, and 20 or more mpg on the highway. I love it. I previously had a 1991 Ford pickup equipped with a 351 cu. in, engine. The engine was the only thing that was problem-free. It had no power and I was lucky to get pasta filling station without having to refuel.”
Don Bromley, Brandon, Manitoba: “It has a lot of power and is easy on fuel,” says Don, pleased with his 1990 Case-IH 2096 tractor. “The cab is quiet and has good visibility, and the steering is light and responsive, “My 1989 Ford F-800 truck equipped with a 429 cu, in, gas engine is my worst buy. The engine is hard on fuel and lacks power, and it’s hard to shift into second gear. After I spent two years complaining to Ford, their last words were, ‘It’s the nature of the beast so live with it.’”
Lester Gehman, Manheim, Penn.: “My 1989 Dodge diesel pickup is my best buy. The Cummins diesel engine starts easy, runs like a top, and pulls like an 8-horse team. It gets 20 to 22 mpg. Takes only half as long to fill the fuel tank as the Ford we owned before.” Norman Farrington, Mechanicsville, Iowa: Norman nominates his 1991 New Idea 5209 rotary hay mower as “best buy”. “All I do is get on and go. It does a great job at fast speeds. “My 1988 Case-IH 7120 tractor handles comfortably, has a quiet cab, and is easy to service. The powershift transmission performs well. “My 1992 Deere 535 round baler with net wrap is built strong to withstand damage on rough ground and makes good bales at high speeds. The netting speeds up baling and sheds water. Works great as long as it goes on right. However, I’ve had problems with it catching and tearing.”
Jim Hrdy, El Reno, Okla.: Jim's had good luck with his 1988 Case-IH 7140 tractor. “T put over 1,000 hours on it every “This tractor stands up to use by high school and college kids who work for me during the summer. It's greenhorn driver tough.” year. It had some minor electrical problems but the dealer solved them. This tractor stands up to use by high school and college kids who work for me during the summer. It's greenhorn driver tough. “Tlike my 1984 International 1950 truck equipped with an 18-ft. bed and hoist. It’s powered by a 6-cyl. diesel engine and has 120,000 miles, It's the most dependable truck on the market in my opinion, I also have Chevrolet and Ford trucks but they can’t match this truck’s performance. I'ma custom harvester and use this truck to pull a Case-IH 1680 combine from Oklahoma to South Dakota, I never have to stop. I’m well pleased with its durability.” Jim says he had bad luck with his 1989 Deere 1508 mower from the start. “It’s the only mower I've ever owned where I had to mow everything twice in order to get a good cut, even with sharp new blades. I had to constantly replace U-joints on the main driveline. The dealer stood behind the mower until the warranty ran out and then it was mine. After about 4 years of putting up with it, traded it off for a Deere 1518 mower. It works good. No problems.”
Philip M. Broer, Iowa Falls, Iowa: “I like my 1993 Dodge W350 4-WD pickup equipped with a Cummins turbocharged diesel engine. It has a lot more power than the Ford F-250 pickup equipped with a 351 cu. in. V-8 engine that I traded in, It’s also much more fuel efficient. The best the Ford ever got was 11 mpg, butmy Dodge gets up to 20 mpg. The transmission had a problem but the dealer repaired it at no charge. “I like my Perfect Sense stainless stecl fenceline hog feeders (AgriSense Co., Box 446, Grinnell, Iowa 50112). They’re equipped witha horizontal feed distribution wheel that meters feed to hogs. Feed drops into compartments inside the wheel, and when the hog rotates the wheel the feed drops through holes at the bottom of the wheel and into a tray. The hogs have to cat what's on the tray before any more feed will come outso they never waste fresh feed. No adjustments are necessary - all I have to do is fill the feeder. I like it better than the Peterson concrete feeders I had been using. They're hard to adjust to give out the right amount of feed.”
Donald Beyer, Breckenridge, Minn.: A 1993 Ford New Holland combine rates as Donald’s “best buy”. “It threshes clean and has a lot of capacity.”
Arlen Bonde, Kathryn, N. Dak.: Arlen nominates his 1989 Ford TW-35 front wheel assist tractor as his “worst buy”. “Judging by the way they designed the radiator screen, they must have thought this tractor would be driven only on the highway. There are big gaps on the corners of the screen that let in pieces of straw. Also, pieces of straw kicked up by the front tires get sucked in under the fuel tank. On windy days I have to clean out the radiator two or three times. “The air filter design inside the cab is a joke. The filters are secured by small plastic holders, but there’s no way to adjust them to get them tight and so much dirt gets sucked into the cab that it won't stay clean, One of the plastic holders broke, allowing a filter to fall out, and I accidentally drove over it with the tractor. “The engine leaked oil and anti-freeze onto the front wheel assist driveline and made a mess. The seat is poor quality and ripped after only one year. The tractor is underpowered and uses too much fuel. The transmission gears are so close to each other in speed that one third of them are useless. The hydraulic levers are poorly positioned and won’ t stay in their proper settings. The hydraulic system leaks a gallon of oil per day. The tractor was supposed to come with a 3-year warranty, but our dealer wouldn't ninate suys fix anything without charging us for it. The adjustable steering wheel is located so far from the seat that I have to lean over toreach it. If I slide the seat ahead so I can reach the steering wheel, my knees hit the dash, “My Deere 4760 tractor is my best buy. It's rated at only 5 hp more than the Ford TW-35, but it can pull everything 1 mph faster and uses much less fuel. I had a few small problems with it, but my dealer fixed them at no cost. Deere tractors cost more to buy, but at resale you lose twice as much with a Ford. “My Deere 9600 combine is a best buy. It's a quiet machine, and daily maintenance is faster than on any other combine I’ve ever used. We combined all year without any down time.”
Frederick Draper, Northwood, Ohio: “My worst buy is my 1993 Ford Lincoln Town Car, The computer-regulated, variable power assist steering makes it hard to keep the car going straight down the road. It weaves, zig zags, and fishtails, I’m continuously trying to correct it. It’s the hardest car to steer that I’ve ever had, The company won't do anything about the problem.”
Ray E. Fain, Jr., Sevierville, Tenn.: Ray’s had good luck with the Rollins 3-pt. bale unroller he bought in 1992 (Rollins Farm Equipment, Inc., 1412 White Oak Road, Cleveland, Tenn, 37312, ph 6154767088). It's equipped with two 54-in. long spears that can be hydraulically opened or closed. “It works perfect and handles any size round bale. Lets all my cattle eat at the same time, and at the end of the feeding season there are no mud holes or spots where grass has been killed as with conventional round bale feeders.” On the “worst buy” side, Ray’s had problems with his 1989 Ford Mustang XL 50 car equipped with a 5-speed manual transmission, “The rear brakes makea loud noise when brakes are applied. The hand brake cable was kinked at the factory, and I had to have the original set of rear drums turned five times. New drums have been turned twice. It has gone through five sets of brake shoes. The car now has only 42,000 miles, but the brakes still make noise. Two company dealers have failed to solve the problem. It has also gone through five speed sensors and two oil pressure sensors, but those problems have now been corrected. need help.”
Donald Olayer, Beaver Falls, Penn.: Donald nominates his 1993 Case-IH 8350 centerline baler as his “best buy”. “Il ordered the baler with a hydraulic pickup and bale tension adjustment. It makes solid, uniform bales and doesn’ tlose as many leaves as my old baler. I like the fact that it follows right behind my tractor on the highway. I haven't had any problems with hay getting caught on the drawbar due to driving over the windrow.” “T leased a 1994 Ford Explorer and really like it. It's a pleasure to drive and is fuel efficient. I like the push button 4-WD.”
Jerry McDonald, Wyoming, Penn.: “It's like having another tractor,” reports Jerry, pleased with his 1989 Yamaha Big Bear 4-wheel ATV. “We use it to pull hay and gravity wagons and to go from the field back to the yard for tools or parts. “My 1989 Ford Escort is my worst buy. Ithad brake problems almost right from the start and the transmission failed at 30,000 miles. I replaced it with a Subaru Legacy. No problems yet.”
Emmett Blomquist, Dillon, Mont.: “My 1984 Ford Crown Victoria was a roomy, easy driving road car. It had 130,000 miles on it when I traded it in for a 1992 Ford Crown Victoria that now has 24,000 miles “It prepares a seedbed better than any other machine I've used.” onit. It'san even better car that gets up to 28 mpg on long trips. It’s a great car.”
Orvis Byklum, Grygla, Minn.: “My 1974 Case 1175 tractor has over 3,000 EE aT aE “The dealer did a good job repairing it. But what will happen next?” ae. an hours. I had to replace one throwoutbearing at 300 hours, Since then it has requiredonly routine maintenance, “My worst buy is my New Holland 855 round baler. The maindrivebeltbrokedown Editor’s Note: We received a lot of response to last issue’s “worst buy” report from Emily Coffey, Arvada, Colo., about her 1990 Ford-New Holland 276 bi-directional tractor that burned up. Jimmy Byers, Brinkley, Ark., sent us the photo above that shows a blown-out battery (on right in photo) in his 1992 Ford New Holland 946 340 hp. 4-WD, Byers thinks the battery hold-down brackets caused the blow-out. “If Emily had the same hold-down system on her tractor, and the batteries blew out, that could have caused her fire. The problem is that the brackets are positioned too close to the battery posts. They corroded and then shorted out. The end blew out of one battery. We had battery acid all over. Our dealer didn’t wantto repair the damage but after I threatened to sue, he did.” Ed Swanson at the Minnesota Department of Transportation, St. Paul, Minn., says one of the department's 1992 Ford New Holland 276’s burned up this fall. “Tt went up so fast, the operator barely had time to get off. We’re concerned because we own a number of these tractors. We don’t want anyone to get hurt and we don’t want to lose equipment.” Swanson says he thinks the fire started in the articulation area and may have been caused by an electrical problem, but no investigation has yet been carried out. Galen Travis, Burlington, Colo., who once had a fire beneath the cab on his 1985 Versatile 276, is convinced the fire problem is caused by friction between a drive shaft and crop residue that packs tightly into the area between the bottom of the cab and the frame of the tractor. “Trash packs in there so tight it’s difficult to get it out,” says Travis, who came up witha modification kit that raises the cab up a few inches (see story on page 29 in this issue).
Florian Steinlage, West Union, Iowa: David likes his four Sukup fans. "We air dry about 25,000 bu. of com each year at a costof less than 10 cents per bu. for electricity. Our Sukup fans work great and are really working well now that we've replaced the General Electric drip-proof 10 hp motors with totally enclosed motors. The company still won't admit that it needs enclosed motors on outdoor applications. The costto us was about $2,000. Youcouldn't give me a General Electric drip-proof motor,” Florian Steinlage, West Union, Iowa: "Our best buy lately has been our Deere 6400 tractor. We have over 500 hours on it and use it for everything. We thought we had the world by the tail with our "55" series and were worried that we wouldn't like these new tractors as well , but we really like them." Hubert Ragsdale, Wheatly, Ark., also thinks Coffey’s problem may have been caused by friction. “I’ve been a volunteer firefighter for 28 years and a fire chief for 19 years and it doesn’t seem likely to me that the cause was electrical. Look for bad bearings on drive shafts that might have heated up and ignited crop residue. Only a close and painstaking investigation will ever disclose the cause.” Jeff Greenburg, Stratford, Wis., experienced a fire in his 1990 Ford New Holland 276 that totalled the tractor, “It had 2,000 hours on it. Our hired man was driving it but, fortunately, he wasn't hurt. The fire appeared to start down in under the hood and may have been fueled by hydraulic fluid. Before the fire we had experienced problems with hydraulic hose breakage in the articulation area, where hoses, cables, wires, and driveshafts are all jammed lightly together. We were fortunate that our insurance policy provided full coverage for the loss, They never did tell us what caused the fire. I think the 276 is a tremendous tractor despite the problems we had." Emily Coffey says she still hasn’t reached a final insurance settlement with Farm Bureau Insurance, which initially offered $35,000 for the destroyed tractor and swather, which were purchased new in 1990 for $77,000. Specially trained fire investigators have inspected the tractor but had not yet come back with a final report at the time this issue went to press. She hasn’theard from anyone at Ford New Holland as to the probable cause of the fire. “One of their representatives came out after the fire and said he’d send a report, but we never heard back,” she says. Contact: FARM SHOW Followup, Emily Coffey, 6187 Independence St., Arvada, Colo. 80004 (ph 303 422-2865).
Kenneth Bernard, Wabasso, Minn.: “My worst buy is a manure spreader that I recently purchased from H & S Mfg. It's designed to handle both solids and liquids, = ; tractor would bum up. We asked Farm Bureau to send out a fire investigator. He said he will send us a report soon. Ford_ New Holland sent out a couple of people but they haven’t yet been able to deter- mine the cause of the fire. The fire started } under the cab. The operator had no warning from any gauges that anything was wrong with the tractor. There was only time to tum off the ignition key and getoff the tractor before it was completely engulfed in flames.” but it leaks liquid manure like a sieve. If 1 had to haul very far wouldn’t have anything to unload by the time I got there. The - company is supposed to solve the problem, but they’ve been slow to do anything.”
Jim Stauffer, Manton, Mich.: Jim owns a 1992 Ford New Holland L-785 skid steer loader. “It has worked 210 hours with no problems. The diesel engine runs smooth. We traded in a 1985 New Holland skidsteer loader with over 10,500 hours. We depend on our skid steer loaders for feeding our 100-cow dairy herd, as well as cleaning out manure. “Our worst buy was a dealership in AgriNomic Supply. We thought we could save money by buying at wholesale prices. However, what we ordered cost the same as if we had bought it locally and took two weeks to get here. Most of the time we couldn't place an order because there was nobody there or they put us on hold and forgot about us, We tried to get our money back, but the company won’t talk to us or return our calls.”
W.J. Thomas Kirk, Marquette, Manitoba: _ He's “very satisfied” with his 1988 Ford New - Holland TR96 combine, bul says it could use a couple of improvements, “I've had some problems with flax straw wrapping around the feeder chain and beater. Also the unloading auger should be speeded up substantially,”
Michael Kozel, Peru, Ill..: Michael's the satisfied owner of a 1991 GM heavy 3/4ton pickup. “Ithasa454 cu. in, fuel-injected engine and 4-speed manual transmission but still gets 10 mpg around the farm and running errands at my machine shop. The ride is second to none and better than Ford or Dodge. “My 1984 Honda TRX 200 4-wheeler ATV isalsoa best buy. I drive ithard all year long. It gotits first set of new tires anda new clutch this year. “Two years ago I bought my wife a 1986 Ford LTD II Sedan with 20,000 miles as a work car. It's a worst buy. After 40,000 miles, smoking oil started coming outof the crankcase breathers on the 6-cylinder engine. took it to a Ford garage and was told itneeded a complete overhaul. I've had the brakes checked twice, but still have to literally stand on them to get them to work. The ride is another sore subject. I can feel every bump in the road. My new pickup puts it to shame for ride quality.”
Jady Gilbert, Snyder, Texas: Jady’s “best buy” is a 1988 Toyota 6-cylinder extra cab deluxe pickup. “It has 120,000 miles but still has the original spark plugs and is as fuel efficient as when it was new. It has never been in the shop. I replaced the front brake pads at 60,000 miles and again at 103,000 miles. It costs a total of 32 cents per mile to drive including all expenses for insurance, taxes, fuel, oil, monthly payments, and tires. That compares to about 60 cents per mile for Dodge and about 65 cents for Chevy and Ford. My 4-year-old pickup would sell for about $6,500 while Ford and Chevies from the same year bring only $1,500 or so.”
Galen Rozenboom, Sully, Iowa: “It does an excellent job of spreading any type of manure from hard-frozen to sloppy. Works great,” says Galen, owner of a 1990 Ford New Holland 305 side delivery manure spreader.
David Janssens, Surrey, B.C.: David nominates his 1990 Ford New Holland 575 baler as a “worst buy”. “It's equipped with a ‘revolutionary’ new rotary feed system that’s supposed to direct hay into the baling chamber. However, hay tends to wraparound the rotor shafts. I’ve adjusted timing of the rotors by as muchas 180 degrees and yet the problem persists. I've already replaced a rotor shaft and some bearings. A neighbor who owns the same baler has also replaced a rotor shaft as well as all six bearings.” On the other hand, David says his 1990 Ford TW-35 tractor is “a pleasure to drive. The hydraulics are very responsive and the mechanical front wheel drive provides plenty of lugging power. It has a quiet cab and smooth ride.”
Bill Short, Hamilton, Mo.: “My best buy is a Ford New Holland 451 mower equipped with a 9-ft. sicklebar and ledger plate because there are fewer mower guards and they don’t plug up as easily as conven tional guards. However, it needs a better swath divide board in heavy, tall hay.”
Loudon Reel, Alleyton, Texas: Loudon says his Echo chain saw has enough power to cut pecan, oak, and mesquite up to 10 in, in dia. and is a “best buy”. “It starts quick and easy. 1 simply pull out the choke, pull the starter rope until the saw fires up, and push in the choke. Starts on three pullsevery time without fail, whether it’s 30° or 90°. I like that.” Loudon's worst buy of all time is his Ford mower. “The blades were nothing more than strips of 10-ga, 1/8-in. sheet metal sharpened on one side, with hardly any lift at all, The ends were tumed upward after three hours of mowing, causing grass buildup under the deck. Other problems included two bent shaft assemblies on the mowing deck, three flat tires, a new belt for the mowing deck, a difficult belt adjusument system, a hard-to-shift transmission, a new transmission drive belt, unsatisfactory gear ratios, a new slarter solenoid, a head that fell off, and an engine that uses oil and won't idle smoothly,”
Carole Ruttan, Bracebridge, Ont.: “It's “Ford's warranty is a joke. I'm sorry I ever saw this pickup.” ideal for the part-time logger or wood cutter,” says Carole, pleased with a pto-operated 1988 FARMI 400 3-pt. mounted. “It hauls whole trees out of the bush and is especially good on hilly terrain too steep for a tractor.”
Mike Hanley, Cashton, Wis.: Mike nominates his 1985 Ford LTD car as a “worst buy”. “The V-6 aluminum engine is a piece of junk. In one year two heads cracked and one warped. The supplier told the shop man that these heads are such a hot selling item that he has a hard time keeping them in stock.”
Corwin Whitworth, Inkom, Idaho: Corwin says his “worst buy” is his 1985 Versatile 956 tractor. “I’ve broken six differential axle housings so far, as well as the main frame. The flex coupling went out, the hinge pins and steering rams had to be replaced. Ford-New Holland says I’m the only one with these problems.”
Samuel Noel, Abbeville, La.: “It rides and performs like no other 4-WD tractor I’ve ever driven,” says Samuel, happy with his 1988 Versatile 876. “The company has simplified maintenance on this tractor without sacrificing quality. 1 regret that Ford changed the color scheme on this beautiful tractor. Ford blue is flat out ugly and I feel will hurt their sales.”
Lynwood Crary, Norwich, Conn,; “I’m extremely pleased with my 1987 FordNew Holland 4610 and 1985 7710 tractors. “[ also like my Ford-New Holland 411 discbine, It has a wider cutting swath and faster ground speed than the New Holland 478 haybine which I previously owned and culs my mowing time almost in half, It certainly proved itself in this year’s wetand tangled crop.”
Maurice Ferguson, Lancaster, $.C.: A 1988 Ford XLT F-150 Lariat 4 by 4 is atthe top of Maurice’s “best buy” list. “I’ve puton about 23,000 miles in 10 months and never had a single problem. Great comfort and performance, excellent mileage.”
Garrett Guard, Lebanon, Ohio: “It's easy to putin 16 hour days with this tractor,” says Garrett, happy owner of a 1984 Deere 4650 equipped with powershift transmission, mechanical front wheel drive, and radial tires. “It has lots of power, excellent traction, and the cab provides excellent visibility and a quiet ride. It has 4,500 hours “It's easy to put in 16-hour days with this tractor.” on it, but I haven’t spent one dollar on repairs.” A 1989 Chevrolet 3/4 ton diesel pickup equipped with an automatic transmission heads Garrett's “worst buy” list. “Three weeks after delivery a head cracked, leaking oil into the cylinder. ~?.¢ oil pressure gauge didn’t work so the engine ran dry and threw a rod. Two wecks later the transmission went out. The warranty covered it but there was a major hassle because they said it was my fault. It’s only half the truck with half the room as my previous Ford.”
David Beckie, Saskatoon, Sask.: “My worst buy is my 1987 Ford Ranger XLT Supercab pickup. It only has about 56,000 kilometers but already I’ve had to replace all four tires and shocks. The valve covers “The engine compartment is so compact that I have to hire my 3-year-old nephew to change the spark plugs.” continuously leak oil, no matter how many times I tighten them. The engine compartment is so compact that I have to hire my 3year-old nephew to change the spark plugs oil, belts, etc. I've also had a lot of trouble with the brakes and wheel alignment."
Earl Krewinghaus, Venedy, Ill: Earl says his 1985 Deere 2950 tractor heads his “worst buy” list. “The air conditioner belt is too long to run on two pulleys. It loosens up just enough to make the air conditioner “You couldn't give me a General Motors product now.” wobble which causes the belt to tear. We tighten the belt frequently, yet we still have to replace it about twice a year.” Bob Gates, Lincoln, Calif.; Bob has had trouble with his 1986 Chevrolet 3/4-ton pickup. “The major problem was excessive oil usage - one quart every 500 to 700 miles. After 1 1/2 years of fighting and arguing with General Motors, I decided to take a loss and buy a Ford pickup which I'm happy with. It’s hard to understand why General Motors won't satisfy a customer to secure a long term buyer. You couldn't give me a General Motors product now.” Mer! Montel, Pierceton, Ind.; “It’s large enough to do some heavy work but small enough to take care of most of my utility work,” reports Merl, pleased with his 1978 Allis-Chalmers 185 tractor which he purchased two years ago. “I mounted a heavy duty loader on it which makes it an allaround tractor. Too bad they quit manufacturing this tractor.”
Gordon Nelson, Swanvyille, Minn.: Gordon likes his 1987 Ford Taurus. “It's gone 48,000 miles without a hitch and gets 34 mpg on 10% ethanol fuel and 29 to 30 mpg on unleaded gas. But if I could do it over] wouldn't buy the extended warranty.” On the negative side, Gordon is unhappy with his Deere 1010 utility actor and loader, “The tractor doesn'thave enough hydraulic capacity to operate the loader, and can’t find a higher output pump that fits the tractor's spline coupling. The tractordoesn't have live pto so I can’t add a pto pump, If anyone knows of a bigger pump or adapter I'd like to hear from them.”
John Weppler, Lewis, Iowa: John's “worst buy” is his 1982 Ford EXP pickup. “The aluminum water pump bearings seized and broke the timing belt pistons, bending the valves and cracking the head. A recall could have prevented this mess.” On the “best buy” side, John nominates his 1988 Chevrolet 3500 pickup equipped with a 454 engine. “It handles and tows well.”
Henry Musch, Revillo, 8. Dak.: “My worst buy ismy 1988 Ford X-L 150 pickup. The transmission went out with only 4,000 “The transmission and parts came from Japan so we had to wait seven weeks to get it repaired.” miles on it, The transmission and parts came from Japan so we had to wait seven weeks to get it repaired,”
Gerald Keith, Leesville, Texas: “It has better power and speed than I expected and gets 46 miles per gallon,” saysGerald, whose 1985 Ford Tempo GL has nevertheless had some problems, The car is equipped with a diesel engine and a 5-speed transmission. “The transmission rattled from the beginning and then it started jumping out of second gear and stuck in reverse, Ford mechanics worked on it three times but still didn’t fix itright. Shortly after the warranty expired the engine began using oil.” On the “plus” side, Gerald is pleased with his 1986 Kubota M8950 tractor. “It cost $10,000 less than other comparably sized tractors and starts immediately in cold weather. It has a good selection of gears, excellent fuel economy, and a quiet cab. However it has a poor radio.”
Roy Lee Adams, Delaware, Okla.: “It gets only 13.8 mpg and uses a quart of oil every 1,500 miles just like clockwork,” says Roy Lee, unhappy with his 1988 Ford XLT 1/2-ton pickup. “I took the truck back to the dealer and he told me it’s normal for this truck to use that much oil. But when I buy a new truck I don’t want to buy oil for it all the time.”
George Stevens, Brookside,N.C.: “I’m a Ford man but I love my Dodge. It’s one tough truck,” says George, pleased with his 1989 Dodge W-250 4-WD pickup equipped with a Cummins turbo diesel engine. “The diesel engine is more powerful than gas engines and gets about 17 mpg.” George nominates his 1988 Deere 600 AMT 5-wheeler as another “best buy”. “It has paid for itself in 12 months through savings in labor. We use it to pick up dead ( birds on our turkey ranges and to feed little poults in our breeder houses.”
Gerald Frates, Paxton, Neb.: “I've owned nothing but Ford pickups since 1959, but this one is a worst buy,” says Gerald about his 1988 Ford 4-WD F-250 equipped with a 460 cu. in. engine. “Ford built this pickup to run up and down highways, but not to work. The lightweight dash shakes so hard on a rough road that I’m afraid it'll fall off in my lap. Two exhaust pipes lead to the catalytic converter, and there’s only a 3/8in. space between them. The pipes strip off tall grass and stubble, which wedge in this space and catch on fire. We had five fires during the first month. Also, there’s no place on the dash to mount a brake controller or a two-way radio, We had to build our Own steel mounting plate and fastened it to the steering column,”
Larry Ford, Mellette, S.D.: “Rides and handles extremely well, has plenty of room and the 3-liter V-6 engine gets good mileage,” says Larry about his 1989 Ford Taurus.
Sam Pfenning, Hobart, Okla.: Sam isn’t pleased with his 1986 Versatile 876 tractor equipped with power shift transmission. “You need the agility of a gymnast lo pour oil into the engine and it takes a monkey to grease the drive train. In order to reach the oil filler hole on top of the engine, you have toclimb up the side of the tractor and try to reach abouta foot farther than you’ re able to so youcan unlatch the hood and tiltthe hood over. The power shift went out the first day we were in the field while we were pulling a light load. The dealer went to bat for us. Butafter replacing three transmissions, three hydraulic pumps and rebuilding the engine, we traded it off to avoid disaster after the warranty expired. Our 1988 Versatile 876 equipped with standard transmission is a good tractor. But I'll never buy another 4WD tractor of any brand if it’s equipped with a power shift.” Sam has had better luck with his 1987 Honda Acura Integra 5-speed automobile. “It holds its resale value better than other cars I’ve owned. I haven't had any maintenance problems after 25,000 miles and it gets over 30 mpg. Interior knobs and switches, which fall off Ford and GM products by the bushel, have stayed put. “ William says his “worst buy” Snapper riding lawn mower constantly needs repair. “Drive belts break about every 10 hours of use and I’ve replaced the safety start mechanism twice. What's more, the dealer went out of business.” On the plus side, “Our Suzuki 4-wheeler ATV LT250isanexcellentmachine, We’ ve used it every day during the last four years and haven’t made any repairs. The 460 engine easily pullsa large livestock trailer.”
Raymond Bungo, Zelienopli, Penn.: “My worst buy is my self-propelled Jacobsen 22-in. lawn mower. It clogs up easily if the grass is a little damp. The selfpropelled mechanism has given us no end of trouble. [ took it to a lawn mower repairman who said he wouldn't repair a Jacobsen because he had just repaired three models. I then took it to a Jacobsen dealer who tuned it up, charged too much and didn’t even fix the self propelled problem.” On the plus side, Raymond likes his 1949 Minneapolis L and 1950 8N Ford. “They sull get the job done.”
Earl Roland, Bottineau, N. Dak.: “My 1983 Ford half ton 4-WD pickup has adequate power, rides good, and carries a load well,” says Earl, who nevertheless has had some problems. “The pickup required a new engine at 40,000 miles and had brake and rear axle problems. It does what I want todo well, but I guess my work requires a 3/ 4-ton pickup. | also wish it had full-time 4On the “best buy” side, Earl nominates his 1987 Deere 4450 tractor which is equipped with mechanical front wheel drive, power shift transmission and a 280 loader. “It does everything you expect it to regardless of mud or snow. It plows snow like a highway plow and handles two big bales with ease. The time itsaves makes ita better buy than a smaller tractor.”
Ted Lippert, Delburne, Alberta: “I’ve been a Ford man since 1928 and my 1985 Ford Ranger 4 by 4 is the best they’ ve built since the Model A of that year. The V-6 engine is fuel efficient. Handles nice and starts good.”
Steven White, (Continued from previous p On the “worst buy” side is his1984 Ford Bronco II. “It wouldn’t run from the start and three garages couldn’ t fix it. [fall Ford trucks are like this one I won't buy another American-made vehicle,”
Clairmont Hofland, Stoughton, Wis.: Clairmontnominates his 1988 Ford Ranger Supercab XLT pickup as his “best buy”. “It's trouble-free. It starts in any kind of weather, gets good gas mileage, handles nice and has a comfortable ride.”
Wilbert Hauser, Aitkin, Minn.: “It gives me a headache every time I drive it,” says 14+ FARM SHow |2-5 Wilbert about his 1987 Ford Econoline van. “I've had four Ford vans before and was pleased with all of them. The V-8 engine uses three quarts of oil in 3,000 miles. There's lots of wind noise and it clunks when it goes into overdrive. I’ve had it back to the dealer twice and they said the wind noise was normal, Italso has a poor heating and air-conditioning system. Passengers riding in the rear seat freeze in the summer and sweat in the summer, When you shell “There's lots of wind noise and it clunks when it goes into overdrive.” out $23,000 for a vehicle, you shouldn’t have to put up with such uncomfortable and annoying conditions.”
Leonard Berube, Saxon, Wis.: “We have a WL44 Westendorf front-end loader on our big 4-WD tractor and it’s superior to any other loader I've seen. Works great,” says Leonard about his “best buy”. “We also have a 1988 4-WD Ford XL pickup with automatic transmission that runs like a top.”
Duane Sibley, Nashua, Mont.: “My 1986 Ford Ranger XLT 4-WD is a best buy. Ithandles well, gets good mileage. It’s easy to change from 2-WD to 4-WD.”
David Fricker, DeValls Bluff, Ark.: “The best tractor I've ever owned is a 1967 Case 930 Comfort King, It’s got more than 6,000 hrs. on it with no major down time. I changed the electrical system with a generator over to a Ford electrical system with an alternator to get cnough electricity for night work. “The best dozer blade I’ve ever used is an 8-ft. Waldon that mounts on my Case 930. The blade support frame remains on the tractor all the time. The blade mounts on the support frame with two pins.”
R. Gene Zimmer, Sycamore, Ohio: “Our 1987 Ford Escort automobile is our best buy. It was delivered in top condition by the dealer. We get good mileage (33-34 mpg) under local conditions. It’s comfortable and has good power for a compactcar.”
Gregg Kresha, Osceola, Neb.: He's had trouble with a Hesston 2600 big round bale mover. “It’s not built tough enough for 1,500 to 1,600 Ib. bales and would not always pull the 4th bale on board. Also, the machine works from the left side of the tractor which makes it tough to operate hydraulic controls on the right side of the tractor.” On the “best buy” side, Gregg’s happy with his 1986 Deere 1525 twin knife swing tongue mower-conditioner. “It lets us cut about 20% faster than our old mower under all types of conditions with no problem. We use it to cut tough native hay crops that we could never cut before. Low maintenance, After installing the Fish carburetor, the pickup’s peformance increased dramatically. I got more power, much smoother operation, and increased mileage to 15 mpg. When feeding cows, my wife drives for me while I throw bales off the back. When trying to go slow, the engine would kill. When she started up again and gave it plenty of gas, it would start with a jerk almost throwing me off. Now, with the Fish installed, the pickup goes very slow without killing. We can also shut it off on the sides of steep hills and not worry about starting up again, as with the Ford carburetors.” Doug De’Athe, Carberry, Manitoba: “Our 1985 Versatile 256 tractor is nice to operate and I have had no trouble to speak of. It’s good on fuel and works great with either a loader or tractor-mount swather.”
Louis Mundt, Belt, Mont.: “I bought a Fish carburetor (Box 298, Groton, S. Dak. 57445) for my 1967 3/4-ton 4-WD Ford pickup with a 390 engine. The best mileage I'd ever gotten with the pickup was 6 mpg after trying three different Ford carburetors.
Alan Hilt, Waverly, Neb.: “My best buy is my 1987 Dodge Dakota pickup. It has the big box of larger pickups and gets about 25 mpg with the 4-speed overdrive. The engine is very easy to get at for service. It can pull a fairly large trailer. I’m having so much better luck mechanically with the Dodge than I had with my last two Ford pickups. SER Ge linate suys “I'm also pleased with my Gnuse rear end scoop made by Gnuse Mfg., Arlington, Neb. It mounts on the tractor 3-pt. and will dig into hard ground with ease and is the best snow removal machine I’ve ever seen. “One of my worst buys of all time was a Deere 1350 six, 18-in. bottom plow. We couldn't get it to stay in the ground no matter what we did. It also pulled way too even though the paint was properly thinned and strained. However, it does do quite wel spraying aluminum asbestos roof paint The plastic valve body is flimsy and broke Needs to be beefed up. We bought the $149.95 sprayer on sale for $89.50. Either price is a rip-off.”
Robert Patten, Lawrenceyille, N.Y.: “It's the most comfortable-riding vehicle I've ever been in,” says Robert about his 1987 Ford Aerostar mini-van, “It’s easy to get in and out of, which is important for elderly people. Driver visability is excellent. The two rear seats snap in and out ina second so you can haul 2, 5 or7 people or the cargo load of a pickup truck.” Elmer E. Willenbring, Richmond, Minn.: “Our 1984 Deutz tractor has performed consistently without any problems. Very fuel efficientand reliable every season of the year.” He’s disappointed with his 1985 Echo weed whip. “The unit has been a problem from the very beginning. Every time we want to use the unit, we have to dismantle the carburetor before the engine runs. The dealer serviced the unit but it didn’t help.”
Robert Patten, Lawrenceyille, N.Y.: “It's the most comfortable-riding vehicle I've ever been in,” says Robert about his 1987 Ford Aerostar mini-van, “It’s easy to get in and out of, which is important for elderly people. Driver visability is excellent. The two rear seats snap in and out ina second so you can haul 2, 5 or7 people or the cargo load of a pickup truck.” Elmer E. Willenbring, Richmond, Minn.: “Our 1984 Deutz tractor has performed consistently without any problems. Very fuel efficientand reliable every season of the year.” He’s disappointed with his 1985 Echo weed whip. “The unit has been a problem from the very beginning. Every time we want to use the unit, we have to dismantle the carburetor before the engine runs. The dealer serviced the unit but it didn’t help.”
Leo P. Bergin, Yerington, Nev.: “I found my best buy Keltgen tires through FARM SHOW. I needed narrow tires and wheels for high hp. tractors used in row crops. Although the arrangements for the purchase of the specialized tires were via a long distance phone call, the tires and wheels supplied were as represented and rim construction quality exceeded the original manufacturer's specifications. The price was fair and delivery was as stated. I was so pleased with the first set that I ordered a second set of tires and wheels for another tractor. These, too, were perfect. “Other best buys have been a Ford TW 35 tractor with mfwd. It’s fuel efficient, trouble-free, comfortable and has more pulling power than other tractor makes with the same advertised hp. [also like my Ford 7710 which hasn't had any problems in 2,000 hrs. of use.” Lawrence Peterson, Ayrshire, Iowa: He likes his 6-ft. wide 1982 Woods belly lawn mower. “It's wider than the wheels on my Case tractor, therefore the tires don’t run the grass down. [ mow about six acres a week and have only needed to replace 2 belts and 2 sets of blades.”
John Spreng, Loudonville, Ohio: He likes his 1985 Ford Ranger pickup and Deere 950 tractor. “This is my second Ranger and both have given very good service. Gets about 27 mpg. The tractor has lots of power and works great for small jobs.” Kenneth Keeny, Stewartstown, Penn.: “Our Hardy outside wood furnace is easy to use. Just fill it and forget it. Produces plenty of domestic hot water, and it’s easy-to starta fire, You don’t need any kindling, just some newspaper. Furnace is so well-insulated that the sides don’t even get warm.” He’s notas happy with “Block Buster, a degreaser from Elite Enterprises. Itwas money totally wasted. I wanted to try one gal. because it was expensive, but the salesman said they didn’t even package it in that small of acontainer. When itcame, it was in 1-gal. jugs inabox. The jugsdon’t say ‘Block Buster’ and the directions on the jugs say to use it ata much less diluted rate than the salesman said. Even at the stronger rate, it had no visible effects on grease.
Ken Preston, Wheatland, Ind.: "My best buy is a 1986 F-150 Ford Ss ee 1inate suUYyS pickup with 302 V-8 engine and automatic overdrive transmission. Gets up to 18 mpg with plenty of power and provides excellent riding comfort. In 20,000 miles it hasn't had even a minor problem, “Another best buy is 2 Poulan 14-in, chain saw that's now 15 years old. I use it for cutting everything from brush to large trees. Handles great and is easy to start. Has only required routine maintenance.”
Les Peterson, Ovid, Col.: "My 1983 Ford Ranger pickup used oil from the day I bought it. The dealer rebuilt the engine at 24,000 miles. It failed again at 38,000. I replaced throw out bearings three times, The poor quality interior wore out at 2,800 miles, the cab wasn't dust or wind-tight and the hood, doors and window glass were hard to open in any type of ice storm, Also, the oil pan drain was located over the steering axle and the oil filter was very hard to reach and change." However, Les likes his 1982 Versatile 835 4-WD tractor. "Excellent fuel economy, ample horsepower and well constructed. Only repair so far was to replace the clutch at 3,800 hrs. My one complaint is that it came with poor quality seat suspension.” Allen Sommers, Schellsburg, Penn.: He nominates his 1986 Slurry Buggy 1500 vacuum tank spreader as "best buy". "It's heavy built, does a super job and is fast loading and unloading.”
Tom Smith, Courtenay, B.C.: "My best buy is a 1980 GMC Heavy Half pickup. I now have over 86,000 miles on it with no repairs. On a long run I've gotten up to 27 mpg. Has lots of power. "My worst buy is a Ford BTC 70B pressure pump. About a month before the warranty was up, it quit working. The cylinder was scored up by a piece that had come off the piston. It was fixed under warranty. Two weeks after the the warranty expired, It went 'gunnysack' again. There's no more pressure than from an ordinary tap." Ronald Larson, Harwood, No. Dak.: "I've had my McKee round baler for about 3 years. Very reliable and can bale anything. Features a fixed bale chamber with short belts. It'll bale either tough or dry material with no trouble."
W.C. Smith, Jesup, Towa: "When Ford says quality is Job I, they aren't kidding. I'm very satisfied with my 1986 Lincoln Town car. "
Gary Struyf, Thedford, Ont.: "The only enjoyment I got out of my 1978 6-cyl. Jeep J-10 pickup with 3speed stick shift was when I handed the keys to the dealer for a new Ford. The Jeep could hardly pull 3 empty wagons down the road. At 42,000 miles, it had rust holes in the box as big as eggs and the rest of the body was rusting badly. Couldn't keep exhaust systems on it. And, every time it rained, your feet got wet. The ride was so rough your head would hit the cab roof." He's happier with his Kalo 12-v. hand-held Mighty Mixer for soybeans. "I plant solid seeded soybeans with a Tye drill. The mixer does an excellent job of mixing beans, Anchor seed treatment and peat inoculant. Sure beats using a paddle to stir the beans,"
Louis Davidson, Quincy, Ohio: "My 1986 F-250 Ford pickup with 6.9 diesel engine is a jewel to drive. Has an abundance of power and load carrying capacity for pulling trailers and wagons."
Danny Kitchen, Yorkton, Saskatchewan: Shaklee's Basic H_ is Danny's “best buy". "I'd heard about farmers who use this product to cut down on chemicals. I gave it a try last spring on wheat and reduced chemical use by 50%." : Billy Wallace, Forbes, North Dakota: "When I installed a Fish carburetor on my 454 cu. in. 3/4 ton 1976 4-WD pickup, gas mileage went from & to 13.5 mpg. I put another Fish carburetor on my 2.5 ton tandem truck with a 350 engine. Gas mileage went from 3 to 6 mpg but what really impressed me was the power increase. It was like someone had put in a 454 engine with lots of power," says Billy, who's now a Fish Carburetor dealer. William Williams, Best And W (Continued from preceding page) Sealstore high moisture com silo equipped with a Laidig unloader as "best buy". "After shoveling crib corn for several years, through all kinds of weather, this silo does the job effortlessly and smoothly with no problems, As an added bonus our dairy herd's test has risen 2 to 3%. "Our worst buy is a new 1987 Arctic Cat Panther snowmobile. We've owned Arctic Cat machines for 15 years and have never had one that steered so lousy and rode so rough. It was a very expensive machine, It gets about 7 mpg and weighs more than a 1/4-ton. I had a 1978 Panther before which steered easier, was lighter, got good gas mileage and was virtually maintenance-free." | Kaari Hesje, Crooked River, | Saskatchewan: "At 700 miles the motor blew apart," says Kaari, upset with his 1986 4-WD 350 Ford one-ton pickup with a 6.9 liter diesel engine. "The company wouldn't give me warranty work as they said it had been over-revved. Finally, they paid for the parts, but it cost me $666 for labor and I was without the truck for 2 months at planting time. I'll never buy another Ford." His "best buy" is a 1986 250 Honda four-wheeler, "It's very handy around the farm. Starts good and has given me very good service with no problems."
Cherry Valley, New York: He nominates his .) /|-2 —FARM SHOW - 12 Best And W (Continued from preceding page) Sealstore high moisture com silo equipped with a Laidig unloader as "best buy". "After shoveling crib corn for several years, through all kinds of weather, this silo does the job effortlessly and smoothly with no problems, As an added bonus our dairy herd's test has risen 2 to 3%. "Our worst buy is a new 1987 Arctic Cat Panther snowmobile. We've owned Arctic Cat machines for 15 years and have never had one that steered so lousy and rode so rough. It was a very expensive machine, It gets about 7 mpg and weighs more than a 1/4-ton. I had a 1978 Panther before which steered easier, was lighter, got good gas mileage and was virtually maintenance-free." | Kaari Hesje, Crooked River, | Saskatchewan: "At 700 miles the motor blew apart," says Kaari, upset with his 1986 4-WD 350 Ford one-ton pickup with a 6.9 liter diesel engine. "The company wouldn't give me warranty work as they said it had been over-revved. Finally, they paid for the parts, but it cost me $666 for labor and I was without the truck for 2 months at planting time. I'll never buy another Ford." His "best buy" is a 1986 250 Honda four-wheeler, "It's very handy around the farm. Starts good and has given me very good service with no problems."
R. Frey, Phillipsburg, New Jersey: "My best buys are all New Holland equipment, including balers, Haybines and choppers. They're all wellmade. I hope the recent acquisition by Ford doesn't adversely affect their products. "Chore Boy ‘Quarter Flow’ milker claws are both my best and worst buy. They're just as fast as Delaval but can't possibly back-flood due to a design like manifold headers on a racing engine. However, they're fitted with certain plastic parts that break easily and are only available by mail order."
and weighs more than a 1/4-ton. I had a 1978 Panther before which steered easier, was lighter, got good gas mileage and was virtually maintenance-free." Kaari Hesje, Crooked River, Saskatchewan: "At 700 miles the motor blew apart," says Kaari, upset with his 1986 4-WD 350 Ford one-ton pickup with a 6.9 liter diesel engine. "The company wouldn't give me warranty work as they said it had been over-revved. Finally, they paid for the parts, but it cost me $666 for labor and I was without the truck for 2 months at planting time. I'll never buy another Ford." His "best buy" is a 1986 250 Honda four-wheeler, "It's very handy around the farm. Starts good and has given me very good service with no problems."
Willie Merfeld, Bernard, Iowa: “My Deere 7000 Max Emerge planter has to be one of the best buys I've ever made. I bought it about 10 years ago and it's been almost trouble free. All I've done is replace a few roller chains and a few bearings on the fertilizer disk openers. If everything owned worked like this planter, it'd be a pleasure to farm. "My worst buy is a Ford TW 10 tractor--not because of the tractor but because of the company behind it. Even when it was new, it was impossible to get the lugs to hold tight on the rear wheel rims, After much frustration and lost time, bought power rib type rims off a bumed up tractor. They hold up fine and work the way they should. Ford admitted they had problems with that type of system but would do nothing to reimburse me for my expense.”
Harry M. Roy, Middlebury, Ind.: “Our New Idea 272 Cut-Ditioner does a good job cutting and conditioning hay. It would be practically impossible to plug it up. The only drawback is that it pulls harder than other makes and models of hay cutting equipment. ‘‘We also like our 3-wheeled Heald’s Hauler. We bought it new in 1978 and have used it almost every day with virtually no maintenance. Handiest mini-pickup you could ever have on a farm.” L.E. West, Gatewood, Mo.; “My 11hp.. Roper mower never gives any trouble. Cuts weeds and grass 4 ft. high.” Frank R. Lupinski, LaGrange, Ohio: “I've had problems with the brakes on my 1980 F-250 Ford pickup ever since the day bought it new. The ring pin bearings are also bad.” Frank likes his Kuhn hay tedder, “Reduces hay drying time by onethird to one-half, It’s gentle on the hay, too,”
Dee Croft, Anthony, Kan: ‘I'm well-pleased with my 1984 Ford Ranger pickup. Works great to check cattle, has good acceleration, is easy to get in and out of, and gets good mileage. Also like the fact that it’s American-made.
Dick Maier, Rochester, N.Y.: ‘I'd like to nominate our Hopper Topper for our 915 International combine as best buy. It covers the bin area and is made out of fiberglass. Installation takes only minutes. “I'm also very pleased with my 1986 Ford Ranger diesel pickup.”
John Gaulding, Winnie, Texas: His 1985 Ford Bronco heads his ‘‘best buy” list. “I’m well-satisfied with it. It has a smooth ride, plenty of pick up and feels solid. It should have better rust proofing at the factory, however. It's 15 months old and already shows signs of rust. Also, the cables that hold the tailgate are too small.”
Robert Bromander, Ulen, Minn.: "'! put Co-op Country Squire A/P radial tires on my 1969 Ford pickup. Now it drives like new and get good traction.”
Robert Bromander, Ulen, Minn.: "'! put Co-op Country Squire A/P radial tires on my 1969 Ford pickup. Now it drives like new and get good traction,”
Julian Upton, Windsor, Mo.: Julian nominates his 1985 Ford Tempo diesel car as “best buy”. ‘‘We have 25,000 miles on it and the performance has been very good. Starts well in hot or cold weather. Fuel mileage is over 50 mpg. Overall construction seems to be very good.”
Lyle Wirth, Prophetstown, III: “'l use this tractor for all my field work “This tractor handles everything like it was out for a Sunday drive.” and it handles everything just like it was out for a Sunday drive,” says Lyle pleased with his 9600 Ford diesel tractor. Edwin R. Sherman, Coupeville, Wash.: “I wouldn't call my Vicon KM-240 a worst buy since it's a good mower-conditioner. But, I’ve had trouble with the way the inside shoe is attached. I finally had to remodel the whole set-up. understand newer models have been changed.” Edwin likes his Stihl 032 chainsaw and his TW-5 Ford tractor. ‘ wanted to buy another brand but the local dealer sold me on Stihl. It’s dependable and easy to handle. My tractor only has 200 hrs. on it but it's a real pleasure to drive. I like the 2-door cab and everything else about it.”
Joe Jantz, Meno, Okla.: “It was in the shop 6 weeks in the first 4,000 miles. Ford wouldn't do anything. You never know when it'll quit running,” says Joe, upset with his 1985 F150 6-cyl Ford pickup. He had good luck with his Ford lawn tractor. “My wife thinks it’s the best.”
John Thorn, Bigfork, Mont.: “My worst buy is a Holley fuel miser carburetor which I bought a year ago and have tried on two Ford engines. The pickup went down to 10 mpg from 12 and the car to 13 mpg from 18.5, Writing to the company only got me excuses and now! havea $195 carburetor that is useless. I've been a mechanic all my life and I tried setting it up several different ways but it’s no use. Wish I'd given the Fish carburetor a try since we had good luck with the original carburetor made back in the early 60's.”
West Branch, Iowa: “I have only 12,000 miles on it so far but it seems to perform well. The 460 engine has plenty of power when pulling a gooseneck trailer loaded with livestock,” says Dean about his “best buy" 1985 %4-ton 4WD Ford pickup. He lists his 1982 GMC %4-ton diesel pickup as ‘worst buy”. “The 6.2L diesel engine is short on power but the biggest problem is with the dealer. He wouldn't submit work orders for warranty, even while the truck was still covered. Another dealer told me the work I had done should have been covered."
E.J. Suchan, Bottineau, N. Dak.: ‘My worst buy was a 1983 150 6-cyl. Ford Ranger pickup with overdrive. The front oil seals were replaced twice, the torque converter replaced because of a factory defect and .the overdrive had a loud whining noise that never went away* I wrote to Ford Motor Co. three times but never got an answer. The local dealer was very good at trying to fix it. He made mea good deal on a 1985 Pord 302 with fuel injection, custom cab and overdrive. I like it very much and haven't had any troubles yet.” Daryl Cress, Fredonia, Kan.; “I'd like to nominate our 1985 Chevy S-10 pickup as a best buy. This is our second one and the best yet. The 2.5 liter fuel-injection engine has plenty of power for light loads and great performance. The fuel injected engine is simple and easy to serve with a limited amount of smog control. The workmanship and quality of materials is good. The only problem we've had was a rattle in the clutch which was fixed soon after we purchased it.’ Best And Wo: (Continued from preceding page) tion on the ground,” reports George, happy with his 1984 International 2+2. '
William Fricke, Petersburg, Ill.: William's pleased with his 1985 Vicon double wide hay rake. ‘Does twice the work of one rake with just one tractor and one operator, Has few | moving parts, gently turns hay andI get less leaf loss.”’ Jake Van Eps, Hancock, Minn.; “‘It always seems to be falling apart and nobody seems to want it in trade,” reports Jake, upset with his Bolens | lawnmower. As “best buy" he cites his 1971 | 4020 Deere tractor. “We've not had any expense On it outside of a new clutch. It has over 5000 hrs. on it and doesn’t use any oil." Burton W. Bartz, Princeton, Minn.; “My New Idea 363 manure spreader is a best buy. The worm gear driveis | very smooth and pulls extremely easy for such a large spreader.” Mark Stiegman, Thawville, Ill. “If this was the only bait on the market, the world would be engulfed with rats. I think it’s a complete waste of money,” says Mark, disappointed with Rampage Rat Bait. ‘Placed it side by side with five other brands. Rodents never touched it although other brands were readily consumed," Brian Klapak, Warren, Ohio; ‘My best buys are all Ford products, Lown 7710 and 4610 tractors. They start easily and operate smoothly. The canopies are like a shade tree and the dealer is one of the best in the business. A 1985 Ford XLT Lariat pickup is also a best buy. Rides excellent and gets good mileage. On the negative side, Brian's unhappy with his 1978 Case 1410 tractor. It leaked oil everywhere and the 3-pt. hitch took a genius to operate, Injector pump went out at 1,000 hrs.”’ Daryl Semerad, Dickinson, N. Dak.: ‘‘Stress points are wellreinforced and it has heavier axles and bigger tires than comparable brands," reports Daryl, happy with his 1983 Kiefer 6 by 16-ft. Stockmaster stock trailer. He nominates his 1985 Sears Craftsman variable speed, reversible ¥-in. drill as ‘worst buy”. ‘I only drilled four holes with it in a year's time and the motor burned out just one month after the warranty ran out. I thought Craftsman had better quality tools than this.” Lester Evers, Windom, Minn.; “My 1981 Buick diesel car only had 45,000 miles on it and blew the engine. Buick said “too bad’, | wound up trading for anew car. Once you havea diesel, you're stuck or you'll lose a lot of money.” On the positive side, Lester says, “My 295-250 AC-DC Century welder is easy to operate and will run a 7018 rod smoothly and will do a beautiful job that will hold. My 8070 Allis Chalmers tractor with mfwd has a cab that is tops. The tractor will pull at reduced throttle and come right back Bh nn eee eee Ed ae rst Buys in rpm's under load. With the front wheels pulling, you can go through mud or up hills with little or no slippage. Tractor starts good even in cold weather. It's far better than my old 7060, “IT also like my 1981 Gleaner M2 combine. It’s always done a good job and gives me very little trouble.”
Steven Kolbet, “Another best buy is our 1975 775 New Holland skid steer loader with Perkins 57 hp. diesel engine. No problems at all and it’s more stable than other skid steers,"’ says Delbert. Wilbur Damman, Melbourne, Iowa: ‘‘Our best buys are two White tractors, a 2-70 and 2-85 with a cab. They're very fuel efficient and smooth running. They each have logged nearly 4,000 hrs. and have never had any work done on them. We also like our White Field Boss planter.” Anderson Hammond, Nichols, S. C.: His 55 Homelite chain saw and 1982 Ford pickup top his ‘best buy”’ list. “My ‘chain saw is always ready and has never given any trouble. My 1982 Ford pickup has given good service, thanks to a good local dealer.”
Virgil Leach, Ogallala, Neb.: “They really do work. I have a 1978 Ford van that averaged 10-12 mpg. now get an average of 20 mpg and have more power than before," reports Virgil, pleased with an engine equipped with Mike Brown's remanufactured cam and pistons.
Allen W. Reilly, Spangle, Wash.: He's pleased with his 1984 Ford Econoline 150 van and his 1985 Campbell 16-ft, ‘“‘stock combo" trailer. ‘We bought the van with a towing package, 351 high performance engine, and automatic transmission. The ride’s great. Runs quiet and gets about 18 mpg whether loaded with 2 people or 7, Has no problems pulling a trailer and is stable in wind. The stock trailer hauls up to 9 heavy heifers easily. Three doors make it easy to load and unload anywhere. High sides provide excellent protection against bad weather.”
Roger Neuman, Baraboo, Wis.: “We'd like to nominate our Ford tractors as best buys. We currently own five — an 8000, two 7000's a 5000 with a loader and a 4600. They're trouble-free, economical to run and the best-built tractors in the industry. Once you own a Ford tractor, you'll never want anything else. | know we never will. We're very happy about the Ford buy-out of New Holland because our New Holland equipment also ranks high on our best buy list. “On the negative side is our Badger silo unloader, We've had nothing but trouble with it since the day we bought it. It's now four years old and “We've had nothing but trouble with it since the day we bought it.” completely worn out. We'll never buy another."
Dave Martin, Delavan, Hl: ‘The only big breakdown in 1,200 hrs. was the feeder chain and the warranty took care of that. The Ford diesel engine has plenty of power. The twin rotor has plenty of capacity and causes less damage to grain,” says Dave, happy with his TR 70 New Holland combine. On the ‘‘worst buy” side, he nominates his 1982 Chevy pickup with auto-overdrive. “‘It has a transmission that doesn’t know when to shift. It's always going from second to third to fourth and back. The dealer says that’s the nature of the model and won't do anything to help."
Allan Burns, Otto, Wyo.: A 1984 Eversman Corrugator and a 1983 Suzuki 125 4-wheeler top his ‘‘best buy” list. “The 3-pt. mounted corrugator makes good clean water marks for irrigation and leaves a clod-free seedbed. We also use it to mark established alfalfa fields. It's more trouble-free than tool-bar rigs and does a better job. “Our Suzuki 4-wheeler is used for irrigating, fixing fence, herding stock and more. A handier, more useful machine for the farm or ranch would be hard to come by. This model has been fairly dependable but our next one will not be chain-driven, The addition of puncture-proof tires would also be a definite plus.” John W. Gourley, Leechburg, Penn.: “Although this machine is 10-yrs. old, it’s the best mower with the least maintenance you can buy. Just grease 7 fittings, hook up, and you can mow anything wet or dry," says John, pleased with his model 272 New Idea Cut Ditioner. His “worst buy” is a King Kutter 3-pt. hitch mounted disk. “Although the price wasn't too bad, this piece of equipment is definitely not for farm use. Small garden would be better. One stabilizer bar for the 3-pt. bent and the disk gangs are flimsy. It’s a cheaply-made machine that doesn't work up the ground enough to make it worth the trip across the field,” Thomas N, Miller, Cedartown, ~Ga,: “ will never own another Ford baler, The dealer wasn't familiar with wire tie balers and wouldn't service it. The poorly-designed, over-riding clutch in the flywheel had to be replaced witha solid hub. The yoke pin broke, breaking both needles. The twister mechanism is made of poor “The poorly designed flywheel clutch had to be replaced with a solid hub.” materials and shears pins every 500 bales. When working right, baler is slow due to a feed fork design that'll only bale 3 bales per minute in light, fescue hay,"’ reports Thomas upset with his Ford 542 wire tire square baler. He likes his best buy PZ 210 drum mower and Lely Gemini rake/tedder. “Both of these implements are Dutch-made and perform better than their American counterparts, They've caused no maintenance problems in 2 years of service. “I'm also well-pleased with the performance, fuel economy and dealer service on my four used Deutz tractors."”
William Fischer, Fremont, Wis.: “The tools are mostly junk. They're very poor quality and are mostly imported. Some of them broke the first time I used them. I'll never buy tools from them again,” says William, disappointed with a fully-equipped tool chest bought from Fingerhut. As “best buy" he nominates his 4-WD TW 5 Ford. “Handles easy, has a very comfortable seat, good radio and good air conditioning. Worked great last year during a wet fall.”
Denver Dennis, Belleville, Ark.: “We only kept the truck 10 months. The 4-speed transmission didn’t give us the power we needed pulling a trailer, especially going up hills. We had trouble with the brakes locking up and throwing the truck sideways. Also, we didn’t get the gas mileage we were led to believe we'd get with a diesel,’ says Denver, unhappy with his “worst buy’ 1984 Ford ¥-ton truck. But, he lists his 1985 Ford %4-ton with automatic transmission as ‘best buy”. “So far we haven't had one bit of trouble with this truck. Has a super cab, is very handy and we've really enjoyed it.”
Robert Sproule, Listowel, Ont.: “I've had Ford trucks for 20 years and this is the best one yet. It's areal good, strong truck with lots of power which use for pulling a fifth wheel trailer. With a 420 cu. in. engine, it gets good mpg at 20-22 mpg.,"’ says Robert, pleased with his 1985 Ford F-250 diesel pickup.
John Siegler, Imlay City, Mich.: “After 35 years of pickups on the farm, my 4-WD 1984 Ford Ranger with V-6 engine is one of the best. I've put 27,000 miles of sometimes extra-hard use with no trouble at all.”
Robert Gotzman, Ellsworth, Wis.: “It's my best buy ever. It starts easy, runs well, does an excellent job of sawing. So far, it has no bad features,"’ says Robert, happy with his Echo 660 EVL chain saw. _ He's not so happy with his 1985 Ford Escort. “After more than 10,000 miles, it doesn't run properly and doesn't get good gas mileage. My 1982 Escort performed well and got good gas mileage so naturally I'm disappointed.”
Maurice Hinman, Carter, S, Dak.: His “best buy” is a 7 by 16-ft. Kiefer Stockmaster stock trailer. ‘It's a high quality product and about 750 to 1,000 Ibs. heavier than other similarsized trailers. It does cost more but you get a lot better trailer. It's equipped with larger tires and axles." He nominates his Gould %-hp electric outdoor motor as “worst buy.” “It'd only run a 4-in, by 16-ft. auger for about 5 min. and then would get hot and quit. I took it back and got another identical motor. It did exactly the same thing, so I took it back and got a refund. Then | bought a Dayton %2-hp Farm Duty motor. It's worked real well on the same auger.” David A. Ford, Park River, N. Dak.: “I've put 45,000 miles on this pickup since Oct., 1983, I average 26 mpg and have had less repair expense with it than any pickup I've owned,” says David, happy with his 1983 Ford Ranger pickup with a 4-cyl. engine.
Larry Senga, Saskatoon, Sask.: “We're more than happy with this trouble-free vehicle,"’ says Larry about his ‘best buy’ 1985 Ford agricultural machinery industry, “Another good buy is our 7600 Ford tractor with cab,” says Wayne. “In four years it’s required no repairs. Rated at 80 hp. it performs like 100. Hauls manure all winter and always starts, even at 30° below zero. Gets used almost every day. “Our 7807 Deutz is also a good tractor. It’s as inexpensive to operate as the manufacturer claims.”
Daniel Wilde, Burlington, Tex.: “The rear end has a reduction gear protected by an aluminum housing. The housing doesn’t stand up to normal use and allowed the gears to separate so that they wouldn't mesh properly. I had been reluctant to buy a Ford but it had a good price and was powered by a Briggs & Stratton engine, which thought was important,” says Daniel, about his ‘‘worst buy'’ 1984 Ford 830 riding lawnmower. He’s been pleased with his Deere 315 tandem disk harrow. “I needed a disk that could plow through milo and wheat stubble because I was tired of having to add weight to my old disk and then have the centers of the discs break out. This is a real good plowing and finishing disk and the Ys-in. thick, 24-in. dia. discs on 8-in. centers really do the job.”
Dale Lesey, Oakley, Kan.: ‘‘I bought a new %-ton Ford van in 1983, the first year of the 6.9 litre diesel engine, So far, I have driven it 57,000 miles with no trouble at all. The diesel engine is the best engine that have ever operated and have been driving vans since 1966. It also helps that our local dealer is the best Ford dealer in the U.S. Their shop mechanics are the best.”
Richard Voss, New Boston, Mich.: His Fish carburetor from Brown Carburetor Co. ranks as ‘best buy”. “My Ford pickup with automatic transmission and a 460 cu. in engine went from 7% mpg to 14Y2 mpg with an increase in overall performance.”
Kenneth Alt, Wamego, Kan.: He's pleased with his 1984 Mercury Gran Marquis LS. ‘The ride is real smooth and quiet and handles very well. Gas mileage is not quite as good as the Ford Crown Victoria that I traded in on it but overall I'm well satisfied.” Kenneth also names his 1983 International 3288 as “best buy". “It had a few minor problems but my dealer took care of them in good time. It handles very well and the cab is quiet and comfortable. I'm very pleased with its overall performance.”
David C. Prause, China Spring, Tex.: "I bought a 13-shank Mohawk chisel plow 21 years ago. It's a very good machine. I also like my Vermeer 605 Super F round baler. Never a problem — not even broken teeth." He lists his 1977 150 Ford Super Cab as "worst buy". "It had 70,000 miles before I got it completely re- built and running. Good dealer, just a junk truck."
Johnnie Crutchfield, Ardmore, Okla.: "My 1981 %-ton Ford Super Cab has a 'lemon' 400 engine and body. Body supports and bumpers are weak and bed metal tears. My 1984 1-ton Ford with a 350 diesel en- gine has been exceptional in the first 20,000 miles. However, the fuel tanks are poorly placed for flat beds."
Lyall M. Allison, Roland, Man.: He's had problems with his Partner chainsaws. “The first saw wouldn't run if the temperature was above 70”, It was then replaced. The second one dribbled chain oil all over and had to be fixed. The chain jumps off too easy, even when tight. The chain oiler quit working because of a piece they had never put on. These problems have been fixed on warranty. Now I hope for the best. “My Ford ¥-ton pickup is a best buy. It starts and runs reliably, rides good and is economical. The only part that hasn't worked right is the cruise control.”
Bert Knott, St. Pauls, Ont: ‘The dealer had it half the time. Troubles were numerous and service slow. Fuel evaporation in hot weather caused hiccups at start-up. In cold weather, carburetor ice build-up would kill it dead after two miles of driving. The dealer finally took it back with just 6,000 kilometers on it,” says Bert, disappointed with his Fiat X19 sports car. He likes his 5610 Ford tractor, “Only repair required after initial warranty check has been a fuse for the lights.”
Garry Scarfe, Fort Vermilion, Alb.: "The pickup has lower than advertised fuel consumption, handles very well and can carry a good load with no problems," says Garry about his F-150 4-WD Ford.
Howard Colclasure, Farina, Ill.: “My most recent best buy is a Pony “Does a perfect job and is very dependable.” model Troy-bilt garden tiller with electric start. This tiller does everything the company claimed it would do and is very easy to handle. Does a perfect job and is very dependable. Company is also reliable and interested in their customers. “My worst buy is a new 1983 Ford Ranger pickup with 2-WD and automatic transmission. I traded in a 1978 pickup for the truck. I was assured I'd get 26 mpg and plenty of power but it turned out to be a real lemon getting barely 16 mpg and it didn’t have as much power as the Toyota. I took it back to the dealer so many times it was embarrassing and most of the time it was in worse condition when left the agency than before took it in. Six months later traded it off for a 1983 Toyota. The Toyota is perfect in every way, with more power and much quieter operation.”
William Gable, Ft. Wayne, Ind.: “I'm glad I bought my 1983 Ford %-ton diesel pickup. The truck is durable, well-designed and gets good mileage with plenty of power. It’s the best-riding pickup I've ever owned.”
Albert Janzen, Miami, Man.; "I'd like to nominate my Ford tractors as best buys. I presently own three — a TW10, TW15 with front wheel assist and a 6610. All three are well-built, trouble-free, and economical, They have plenty of power and are a joy to operate." J.R. Blakely, Melfort, Sask.: He names his model 30 Deere chainsaw as "best buy". "It's easy to start, fast- cutting, easy to service and light to handle."
David Manning, Pilot Mound, Man.: ''Our best buy is our 7721 Deere combine. It has lots of capacity and does a good job no matter what crop we're threshing. We also like our 4440 Deere tractor. It has lots of power and makes a real good team with the combine." Darrel Harstad, Valley City, N. Dak.: Darrel lists his 1983 Ford Escort and his Troy rototiller as best buys. "The car gets good gas mileage and you can't beat front wheel drive on snow and ice. I've had the rototiller ten years and have spent less than $8 on it. Does a wonderful job."' moving parts to repair, plants beans evenly in the row and rides smoothly.”
John Hansen, Randolph, Neb.: John's pleased with his 1977 F-150 linate CES ered Ford pickup. “I'll buy another Ford when this one retires. It's been a ‘super pickup’. I've put more than 110,000 miles on it in all kinds of conditions ranging from hauling livestock to taking trips. Dealer service has-been super.”
James Richison, Mulkeytown, IL: “This truck is very well built. It hasn't had any service problems," says James, pleased with his 1984 Ford *-250 4 WD, diesel pickup. “The 6.9 liter engine has performed well and has good power and fuel economy. “1 also nominate my two 86 series International tractors and my 1460 Axial Flow combine as ‘best buys’. All have excellent performance and dependability.” James isn’t as happy, however, with his May-Wes folding auger hopper. “The hopper works for unloading gravity wagons but only with the auger at a low angle. When you try to use the hopper with an auger inclined at a normal angle, grain spills out.”
Harold Ehler, Holyrood, Kan.: He's happy with his Winco 5300 watt power plant. “I bought it for use during power outages from ice storms and etc. It's easy starting and very dependable.” As his “worst buy,” Harold nominates his Holley Economaster carburetor. ‘This so-called economy carburetor delivers poor mileage, is hard starting, and always floods out. I've had it worked on twice in 15,000 miles. It was installed on a 1974 Ford * F100 pickup.”
David Dougherty, Pylesville, Md.: “Our best buys include our Deere 4320 tractor and Deere 6600 sidehill combine with 404 turbo-charged engines. No problems at all! “Our biggest headache has been General Electric 10 hp. motors on our Sukup centrifugal grain drying fans. These motors had bearing problems and a wide variety of governor breakdowns. will never buy a General Electric motor again. The company was no help.” Jeff Trosen, Larimore, N. Dak.; “It is my first Ford and I'm glad I bought it,’ says Jeff pleased with his 1983 Ford 4X4 250 diesel pickup. “The truck is tough, durable, welldesigned, gets great mileage and has plenty of power. It's the best riding pickup I've ever had.”
Tom Skeem, Montello, Nevada: Tom's pleased with Herschel Tiger Teeth sickle bar side blades, ‘The side blades eliminate the problem of accummulation of dead undergrowth in the guards, We cut meadows that had not been cut in serveral years where standard side blades would have had serious clogging problems. Also, the new blades are easier to change and stay sharper longer.” Edie Le Clair, Tignish, Prince Edward Island: He likes his 5600 Ford “blue power” special. “It stands up excellently to the vigorous field work and custom work it has to perform. recommend it to anyone who needs a strong performing all-around tractor.”
Frank Evans, Blackfoot, Idaho: ‘‘] feel that Ford is finally getting their act together,”’ says Frank, pleased with his “best buy’ 1983 Ford 4-WD ¥,-ton diesel pickup. “The truck has been a solid performer and both my dealer and Ford Motor Company have been great so far. hope they keep up the good work.”
Randy Scoggins, Charleston, Ark.: ‘‘My wife drives our 1984 Ford Tempo to work every day and she's had little trouble with it in 4,500 miles. Very good dealer service. We've also had good luck with a 5-year old Poulan 306A chain saw.
R.E. Bishop, Linesville, Penn.: “I bought a new Deere 2640 tractor in 1976. It was poorly designed and “T ran it 1,600 hrs. and it cost me over $3.00 in repairs for every hour I used it.”’ poorly assembled. I ran it 1,600 hrs. and it cost me over $3.00 in repairs for every hour I used it. “ have a 6,000 Ford ] boughtinew in 1967 that is still going strong with about 12,000 hrs. I bought a New Holland 467 Haybine that I've used 10 years and all I've had to replace is one bearing. I also have a Farmhand 810 grinder-mixer that I've used 12 years and have only replaced a couple bearings. All of these are very good machines.”
Doug Averitte, Vanleer, Tenn.: He's pleased with his Honda 200E 3-wheeler. “I use it mostly for fencing and feeding. It has really saved my tractor by doing those and other such jobs. bought a trailer along with it that pulls behind. It’s dependable and well-built. “My worst buy is a Massey Ferguson model 39 planter. The rings would not match up with the plates and this resulted in cracked seed. After planting several acres of corn and failing to get it straightened out, I finally parked it and used a Ford planter to replant.”
F.L. Feazel, Washburn, Ill.: “I've had Trimpe hard-surfaced cylinder bars from Clarence Trimpe, Seymour, Ind., in my Deere 105 combine for three years and I wouldn't sell those bars for $1,000 if I knew I couldn't get another set. They're great,’’ says Feazel. ‘Another good buy is our Fuerst harrow. We used it behind a field cultivator. It’s a great tool to mix and incorporate chemicals.” Feazel has also had good luck with his 8600 Ford tractor equipped with a Red Rooster propane injection system from Acme Carburetion, Mankato, Minn. “It lets you inject supplemental propane for extra power on less fuel. We've tried working this 1974 8600 tractor to death but it just keeps on going with a minimum of repairs. Our dealer has given super service.”
Gerard Laevens, Chatham, Ont.; “This plow performs very well. The dealer was helpful in setting up properly,” says Gerard, pleased with his “best buy” 151 Ford moldboard plow.
Bill Shumate, Urbana, Ill.: “The cab and chassis are well-built, the workmanship is very good, and the engine, which is built by International Harvester for Ford, is a good performer for the 420 cu. in. size of the engine. My local Ford dealer is a dealer everyone would like to have, Very thorough and provides good service. This is my first Ford product.” On the negative side, Bill lists a set of replacement diesel injectors installed in his 1975 Allis Chalmers 7060 tractor. ‘‘In 75 hours, two injector tips went bad. My dealer replaced them quickly for me but it was a nuisance. The rest of the tractor has given good service but the older style injectors and pump aren't very good. “Another of my best buys is FARM SHOW. It's chock full of innovative ideas a farmer can use. The Worst and Best Buys section serves as a good guide when shopping for equipment.” Gary Newton, Belfield, N. Dak.: “My best buy is a rotary cutter made by Continental Belton Co., Belton, Texas. It isn’t the heaviest made or the most expensive but I cut weeds that are 5 and 6 ft. tall. I also cut road ditches with it.”
Arthur Vander Pol, Hospers, lowa: “It's truly a gutless wonder,” says Arthur, upset with his 1980 Ford 150 4-WD pickup with a 302 cu. in, engine. ‘It has no power and [ wonder why I ever bought it. On top of that, when I'm pulling something I get only 7 to 8 mpg.”
Frank Roberson, Millville, Minn.: His ‘best buy” is his Ford diesel Y-ton pickup. “We doa lot of hauling and it performs extremely well. We —— haul round balers from lowa and you can hardly tell that you're towing anything. It’s good on fuel. We've only had a few minor problems. We had a problem with the emergency brake but that was taken care of. It has so much power it’s almost unbelievable.” “It has so much power it’s unbelievable.”
Karl Koch, Cadet, Mo.: He nominates his Ford 3600 diesel tractor with a Bushhog QT 2400 loader as “best buy’. “It's very versatile, has plenty of power, controls are easy to reach, it's great for smaller jobs, and it's a pleasure to operate,”
Ronald McCoy, Crookston, Neb.: “My best buys for 1983 are two Ford F-250 4-WD diesel pickups with 4speed transmissions, We pull heavy trailer loads down the road with up to 28,000 Ibs. and get 14.5 mpg. When empty, I get 21.1 mpg. We have over 12,000 miles on both. They're virtually trouble free, start good, ride nice and the synchronized 4-speed shifts beautifully. After owning a 1981 F-350 Ford never thought I'd ever own another Ford, but they really put these pickups together well.”
Len Piwarski, Weyburn, Sask.: “This truck is a gas hog and never worked,” says Len about his ‘‘worst buy’’ 1980 Ford 150 4-WD pickup. “It's got no power and it just keeps falling apart. The Ford dealer wouldn't give me service at any time. Every time took it in to the dealer in Weyburn, it came home worse than it went in.”
Delvert E. Horton, Jordan, N.Y.: He's happy with his Ford 7700 tractor. “I particularly like the ease of starting in the winter. We have had this tractor a little over four years and it has given excellent service. Easy handling and excellent fuel economy. If bought another new tractor it would be a Ford."
Gary McClellan, Vale, Ore.: “Our best buy is our rotary corrugator made by Rotary Corrugator, Ontario, Ore. We have a 40 row pasture model,” says Gary. “It mades a beautiful corrugate. Whether you are in new ground, a hay field, or a pasture, it cuts a clean corrugate and does not leave clods to fall back in behind you. It also cuts and mulches the sod as it goes,” He's disappointed with a Ford 727 manure loader on his Ford 4000 tractor. ‘“The bucket is too small to hold much manure and, when you fill it, it won't lift — even when the hydraulics are at the recommended psi. ) Very frustrating! Also, the bucket only has a one-way cylinder. It will tilt up but has no power to tilt down to dig.”’
Allen Hoffman, Northumberland, Penn: Allen's happy with his 1982 Ford 540-A industrial-type tractor with front-end loader. ‘‘I really like its shuttle-type power reversing. the single handle hydraulic level for the loadeér, the quickness of the action of the bucket, the good brakes and the comfortable seat with all controls in easy reach. The gas pedal makes it great for easing around posts, which is handy for us as it’s primarily used for cleaning out broiler houses and loading manure on trucks. Also, if starts easier in cold weather than expected for a diesel. Industrial units are a good buy, feel, because they're built better than normal farm loader tractors.” Paul and Brad Dangberg, Wayne, Neb.: The “best buys” are their Deere 200 stacker and Deere 454 row crop bean head mounted with a Bish adaptor on their TR70 New Holland combine. ‘Upkeep on the stacker has been minimal and dealer service is excellent. The bean head does an excellent job on down and tangled beans and the combine’s twin rotor does exceptional work, Grain is cleaned with few cracks and fines.” The Dangberg’s are unhappy with their International 4166 4-WD tractor. “It's given us nothing but trouble, including the transfer case, the top bearing in the transmission, the hydraulic pump and the fuel tank — everything but major engine trouble. It has logged more shop hours than field time. We've spent more than $4,000 on repairs in 400 hrs. The local dealer tried to maintain it but it fell apart faster than he could get it repaired, We'd like another 4-WD but it won't be red,”
W. Scott Barnes, Monroe, Va.: He heats his 140-year-old farmhouse and a 14 by 20 ft. office building with his “This was our only source of heat last winter.” “best buy’’ Taylor outdoor wood burning 400 gal. hot water furnace. “Everything is automatic, providing uniform heat in the house without all of the dirt and dust associated with woodburners. This was our only source of heat last winter." Scott’s unhappy with his 1979 Ford % ton 4-WD pickup. ‘At 3,000 miles the valves began to rattle, and I took it to the service department. I was told that the rattling was normal. Later, took it back and got the same answer, At 18,000 miles the noise was so bad, and it burned a quart of — oil every 100 mi., that [had a valve job done, The mechanic said the valve stems and guides were the worst he had ever seen. I took the bill to the dealer but he wouldn't pay because he had no record of my having the valve noise checked during warranty. At 23,000 miles the rings and all bearings were shot. Now the transmission is about to go, the front axle is broken and the brakes are shot. This is truly a piece of junk!"
Fillard Tolle, Otway, Ohio: “We bought our Long tractor for half what a John Deere or Ford would have cost,” said Fillard, pleased with his 42 hp Long 460. “It has everything on it and the steering is the best we have ever seen. I believe it runs cheaper than any tractor its size.”’
Frank Stefka, Comstock, Neb.: I'm glad I took out $500, 50,000-mile insurance. couldn't afford to drive without it," says Frank, unhappy with his 1980 Ford 4-wheel drive, % ton pickup. “It's on its third transmission in less than 40,000 miles and that's going bad, too. It has had five heater switches and you still have to kick it to start the blower. I also had “Tt’s on its third transmission in less than 40,000 miles.” trouble with the air conditioner and the front wheels often won't lock in when you need them. The dealer is good but the company didn’t have the farmer or rancher in mind when this pickup was built.” On the plus side, “I've had Vermeer balers since 1976, including ‘D’, ‘G’ and ‘F’ models. They've been the most trouble-free machines I've ever had on the ranch. I bale 2,500 to 3,000 bales a year and have found that the belts cause no problems and are much gentler with alfalfa than other types of balers. The Vermeer Company stands behind their products 100%. I was so pleased with the company that, when I had a chance to become a farmer dealer for them, I jumped at the opportunity.”
Robert McGillivray, Regina, Sask: Robert is pleased with his Ford T.W. 30 tractor, ‘It has performance, power, and durability beyond my expectations,”
Norris Lawson, Yorktown, Tex.: “It's disgraceful to put Henry Ford's name on such junk," says Norris, upset with his 1982 Ford pickup. ‘‘T was told it would get up to 15 mpg, but I've never been able to get more than 13% mpg after 12,500 miles. Pulling atrailer, 1 get about 64% mpg."
Oland McCain, Laurel Hill, Fla.: “We've had very disappointing experiences with Ford hay equipment. It's built lighter and not as well as Deere or New Holland. Would not recommend it to anyone," says Oland. On the plus side, he’s had good luck with his Kuhn disc mower and Butler Agri-building. “The mower cuts very clean through even thick coastal Bermuda grass, even when the grass is wet. Appears to be well engineered and built.”’
Glenn Wollweber, Ford, Wash.: “Our next tractors will be Fords, too," says Glenn, pleased with his Ford 5000 and 3000 tractors. ‘‘We have had no trouble with either one and they use 20% less fuel than other makes. My neighbors can’t believe how easy our Fords start in cold weather. They haven't needed any repairs.”’
Sam Kleinsasser, Moose Jaw, Sask: “If you don’t spend 1 hour doing maintenance on it three times a day, it won't perform," says Sam, disappointed with his 36-ft. Anderson rod weeder. "We still have it and it ‘“Best’”’ and ‘‘' gives nothing but trouble. Drive chains come off, then it plugs up or you have to change bushings on the rods." Sam says a 1975 Ford 1-ton pickup with a crew cab was one of his “‘best buys” ever, “When we traded it in, we had 240,000 miles on it. We replaced the rings and main bearings at 120,000 miles but after that it seemed to get better with age. It has lots of power in its 460 cu. in. engine. It also got 14 to 15 mpg at 70 to 75 mph and we always had a camper on it. “We're also pleased with Del Air heat exchangers that mix cold air from outside with warm air exhausted from the building. When — it’s 40° below outside, the incoming air is at 48 to 50° above zero. We have 8 of these units in our hog operation and we are so well satisfied with them that we took our boilers out and sold them."
Wally Redfield, Morris, Minn.: ‘‘It now has 1,700 hours on it and has performed fantastically,” says Wally, pleased with his 1977 Ford 642 combine. ‘The first two years of operation, our only downtime was one broken fan belt. Since then, we have had only a few small problems. It’s easy on fuel, easy to adjust, has good capacity and is a real joy to operate.
Norman Mairs, Nestleton, Ont.: “Driving our 1977 Ford 150 ¥ ton pickup was like trying to steer a jack rabbit. On some roads you needed two hands on the steering wheel. We had it checked several times but it made no difference. It was also heavy on gas, getting only about 12 to 14 miles per Canadian gallon." Norman's happy, though, with his 1980 GMC ¥2 ton Grande Sierra diesel pickup. “A dream to drive and steer and I'm very pleased with it although it does not give the mileage of 23 to 24 miles per Canadian gallon that it was supposed to get.”
Charlie E. Bennett, Gillsville, Ga.: “The battery was unbelievable. It lasted 9 years and 5 months,” says Charlie, about his 1973 Ford 3000. “I'm well-pleased with the tractor, too, but the battery was something else.”
Frank Stake, Amberson, Penn: “It’s the worst buy I ever made,” says Frank, disappointed with his Simplex Multitherm HF-120 add-on wood furnace. “The boiler is nothing but trouble. If the electricity goes off or any part of the oil burner malfunctions, the wood boiler overheats and all the controls on the boiler are damaged and have to be replaced. This furnace doesn't do the job the salesman said it would. “I'm pleased, though, with my John Deere 567 wheel rake. It rakes linate ES: See clean, even in rough fields. The purchase price was reasonable and it has few parts to wear out. I have only replaced a few rake teeth.” Charles, Blankenship, London, Kent.: “This truck has run 223,234 miles on the original engine, rear end and transmission. All I've replaced are the clutch and waterpump,” says Charles about his ‘‘best buy” 1978 6500 series GMC truck, noting that, “The 366 cu. in. engine is number one in my book.” On the negative side, Charles had a bad experience with another truck, “The ‘worst buy’ in my life was a 1976 600 Ford truck. In 19,000 miles and 13 months, the Ford dealer in Knoxville, Tenn,, installed 6 complete 361 cu. in. engines, each one costing a tow bill of $150 to $460 and a dealer charge of $300 to $700 per engine. don’t want any more Fords, not even as a gift."’
Ted Dyck, Winkler, Man: He sold his 1980 Ford % ton pickup soon after he bought it. “It had a 351 engine but poor power and very poor gas mileage. Also, the box was made so poorly that it was coming apart. finally sold it and got a 1979 Chevrolet.”’
Anton Hambek, Herrick, S. Dak: He's disappointed with his 1980 Lester building used as a milking parlor, loafing barn, and office, “The insulation was supposed to be ‘birdproof’ but there are chunks of insulation all over, There isn't a door on it that fits and mice get in anywhere. The hoods for the exhaust fans are not big enough to let fans work properly.” On the plus side, Anton says his “best buy ever" is his 1968 Ford 4000 tractor, purchased new. “After an overhaul last spring it’s performing as well as the day I bought it. Plenty of power. My only complaint is that it's a little gas hungry.”
Gene D. Arlt, Ritzville, Wash: He nominates Doane’s Agricultural Report as his ‘best buy"’. ‘‘Doane’s sends out a weekly report on markets and what's going on in Washington, D.C. Besides that, they provide a reference book on management, crops, livestock, machinery, taxes, law and other topics. It's nice to have an updated reference book when you're starting a new project or need information on an old project.” George Massie, Jr., Louisa, Va.: “T'd like to nominate three products from Unverferth-McCurdy as ‘best buys’,"” says George. “I'm pleased with their 16-ft. Harrogator, which does a good job of leveling the land, their gravity flow grain box, and a set of their snap-on dual wheels. “We also like our 7600 and 4600 Ford tractors. We've had minor problems with the tractors but the dealer gives good service. However, we didn't like it when Ford went from a district parts center to a regional set-up. Before the change, the parts depot was in Richmond and the dealer could get parts overnight. Now the depot is in Atlanta and it takes two days to get parts.”
Richard Templen, Solderis Grove, Wis: “Our Ford pickup jumps out of ‘park’ into reverse when running or with the motor shut off,"’ says Richard about his “worst buy”. “Ford now sends out stickers recommending that you set the emergency brake. We have had two close calls with this problem.” Richard's pleased with his Case 390 tractor. “It has an abundance of power, easy shifting because of the power shift, and good visibility from the cab along with a smooth ride. Our dealer is extremely reliable and fast on any and all service calls!"
Clifford T. Moore, Eldon, Iowa: “Most newer cars are not made for someone over 6 feet tall so my wife and find ourselves using it as an automobile more and more,"’ says Clifford about his “best buy” 1981 Ford 150 pickup with a 6-cylinder engine and 4-speed transmission. “I've been pleased with the mileage at about 20 mpg. However, it is short of power in low gear.”
Bill Duckworth, Epps, La: ‘This feeder and conveyor is a joke,” says Bill, disappointed with his ‘‘Harvestore ‘Super Shuttle’ feeder and 105 conveyor. They were built cheap and sorry. The feeder had a tendency to disintegrate from time to time, and the chains break constantly in the conveyor. When they break, it takes half a day to dig them out, straighten them and put it back together. Extremely bad buy.” Bill says another “worst buy" was a 360 cu. in. engine in his Ford truck. “The 360 engine was designed wrong and Ford knew it. They extended the warranty 30 months but waited until the 30. months were up before sending a letter to inform us. After buying eight trucks and cars and two tractors from them in the last 10 years, we felt this was a lousy way to treat us. After three years of blown head gaskets, extreme oil consumption, water in the oil, and very little power, we replaced the engines at our own expense. Very little we can do but tell other people,” On the positive side, Bill's pleased with his Farmhand grinder-blower. “This machine has to be the most rugged-built and simplest grinder ever. We have ground over 10,000 bushels of milo and 5,000 bushels of oats with no problems, It has never plugged up, which I couldn't say about the grinder it replaced. Truly a peasure to operate.” Another good buy was his John Deere Max-Emerge 7100 planter. influenced my decision to buy a Max-Emerge,” says Bill. “It has the best seed depth control on the market, is well-built and easy to service. We have planted 400 acres with only minor problems.” Andy Pomerleau, St. Paul, Al‘berta: “This swather is more than a match for any of the hydrostatic swathers on the market today," says Andy, happy with his 1967 New Holland 905 swather with conditioner. ‘‘The flotation draper header cleans obstructions very well and is built to withstand lots of wear and tear. A dream to handle. I look forward to using it each year."
Nancy Pease, Shelburne, Ontario: “This rototiller is belt driven and slight amounts of dust cause the belt to slip,” reports Nancy about her “Ford rototiller. We had troubles starting it and troubles getting the supplier out to service it. The combination of a slipping belt and general weakness resulted in no drive power even on slight upward inclines.”
Harry VanderPol, Alton, Iowa: “I'm not very proud of the transmission in my Ford F150 pickup,” says Harry about his “worst buy’, “I've always liked Ford pickups but I've just recently had to pay over $400 tc rebuild the transmission. The mechanic told me himself that this particular transmission was too ligh duty to be in a pickup. I guess nex time I'll get a % ton but then I'll be sacrificing ride and comfort.” Harry's had good luck with his 580-B Case backhoe tractor. ‘Have had no engine, converter, transmission, or rear end problems whatsoever in 3,000 hours,”’ says Harry. “Undoubtedly this is the best hoe in its class. Also, the dealership is tops in providing parts, service and leased equipment rentals.”
Mark Fleer, Haskins, Neb: “I'm happy with our White 8600 combine. After four years and 3,500 acres of “A few phone calls resulted in an increased speed of 1.3 miles per hour in wet corn.” corn, we have had no problems. It just keeps going and going, especially the last three years since I set it to the specifications of Ray Stueckle, author of ‘Combine Settings for Better Harvesting’ (Box 1348, Caldwell, Idaho 83605), which I read about in FARM SHOW. A few phone calls to Ray resulted in an increased speed of 1.3 miles per hour in wet corn. I have to “Our 8-row Buffalo cultivator has also been a ‘best buy’,’’ Mark continues. “I bought it at the urging of a retired farmer but was leary of such a big width in our hills. Also, had never cultivated with a rear-mount cultivator before and said I never would, but after cultivating with this rig a few days you really get attached to it. A stabilizer for each row helps cut trash and weeds, stops sway on sidehills, and you can go twice as fast — even the first time around.” On the negative side, Mark's unhappy with his 1979 Ford 150 4-WD pickup with 400 c.i.d. engine. “The engine knocks whenever it is cold or at first start up in the morning. Terrible gas mileage. My Dad has the same pickup with the same engine and still has a third of a tank of gas when mine is empty. Ido, however, like the handling and cab space in the Fords. The dealer has tried to correct the problems.”
Darrah Roberts, Iowa Falls, lowa: “My ‘best buy’ of all time has to be my 1949 8N Ford tractor. It has never been overhauled and, after 32 years of service, still doesn’t use any oil. “My worst machine ever was a 3-wheel Hagie high-clearance sprayer. The front pedestal snapped off three times. The main frame, which consists of a 6-in. pipe, broke in the field as did one of the rear legs. The tank support boom and front wheel drive were all designed too light and, therefore, failed to give satisfactory service. However, after several years of welding, beefing up and re-designing, this machine is now ‘better than factory’. seldom have trouble in the field of any kind.”
Evan J. Brown, Richfield, Idaho: “We bought our first three-wheeler two years ago and were so pleased with it we bought a second one this year,’ says Evan, happy with his Honda ATC. “It's the least cost piece of equipment on the farm. Two people can fide it and you can haul everything from a sack of salt to 40 ft. of gated irrigation pipe. “Although this isn’t really a ‘worst buy’. we had a bad experience with our 9700 Ford tractor. The tractor has worked out fine, but before it was even unloaded we noticed one bad tire and also that both rear axles were leaking oil. Both the driver of the truck and the dealer assured us the problems would be taken care of but so far we have not been reimbursed as promised.”
Carrol Wrinkle, Ontario, Ore: His two “best buys’ are his Ace Cultipacker and Case offset disk. ‘‘l bought the culti-packer from our local Ford dealer. It’s a good buy and works well in our heavy clay soil. Does well in clods and crust. Pulls either way — one side is regular and the other side grinds harder on clods. The Case disk really cuts, especially in straw and ground cover. It covers well, cuts deep and leaves little grooving in the field.”
D.H. Alexander, Brandon, Man: He likes his Wen electric chain saw. “ haven't used it much yet, but have had no trouble at all. It's very handy for cutting up firewood for the shop. Indoors it’s convenient as there are no exhaust fumes. “Also on the plus side, converted an old Case combine into a selfpropelled sprayer. It works quite well with two 200-gal. tanks and booms on it. Covers approximately 70 ft. with end nozzles. “I'm also pleased with my 18-ft. C.G.L.L. model 550 swather, Lays a real good swath and causes no trouble at all. The 200 Ford motor runs well and is easier on gas than the older model with the Wisconsin engine. The table is on a center pivot, does a good job of floating over stones and gullies, and is easy to control.”
Joyce W. Miller, Independence, Kan: “In 1979 I bought a Ford 2600 3-cylinder diesel tractor. in two ‘*A mechanic told me to turn the steering wheel when turning the key. It worked.” years, it has been beyond my expectations in dependability, amount of warranty work needed, fuel economy and its snappy engine. “In 1979 Lalso bought a 2640 John Deere tractor. It starts good when cold, has plenty of power but is the most frustrating tractor in my 42 years of owning tractors. First, the quick couplers on the cylinder hose popped out several times, shooting about one gallon of oil on the ground. [had to wire it together for 11 months before John Deere replaced the unit. “Then, the hose on the oil surge tank above the radiator split and, when oil hit the fan, it gave me an oil bath, Deere made a heavier hose but it took 15 months to get it. Another problem is that for the last year, after using the tractor fora few minutes, if] shut it off the starter would not turn the engine over. A mechanic told me to turn the steering wheel when turning the key. It works. “The final problem is that the hydraulic cylinder drops its load when cold but raises when warmed up, requiring constant adjustment on the lever,” explains Joyce.
Harold Cox, Holladay, Tenn: ‘For a small combine, this machine has great capacity. It really handles a 4-row cornhead well. The cab is comfortable and we've had good dealer service," reports Harold about his ‘best buy” Gleaner K-2. He nominates his 1979 Ford 150 diesel 2-wheel drive pickup as his “worst buy’. “The paint has come off, the motor is shot, the transmission gone and dealer service is terrible.”
Ron Mccoy, Crookston, Neb: ‘‘l would like to nominate my 1981 Ford F-350 pickup as my ‘worst buy’,” says Ron. “When I first bought it, got 7.75 miles to the gallon with the 400 cu. in. engine. The dealer worked hard for me but couldn't get Ford to give me a new carburetor so finally bought a new 1979 model carb and my mileage jumped to 13.5. But I had other problems. The gearshift lever fell off in my hand. called Ford Motor Co. and all they did was refer me to the dealer, who, in turn, can't get anything out of Ford.” Ron adds that he’s happy with his two John Deere 4840's. ‘‘They're trouble free and have a world of power and comfort. I also have high praise for Deere's 12-row MaxEmerge planters. I've owned three of them and they're the Cadillac of planters.”
John Shellhammer, Anthony, Kan: ‘If needed another 4-wheel drive, it would definitely be another Versatile,” says John. ‘I like the service features, dependability, power, performance, economy and just about everything else. “I'm not as satisfied with my '79 F-150 Ford pickup supercab. The body seems poorly built, with many rattles and squeaks. At 10,000 miles, the tierod ends wore out. The steering gear box needed to be replaced at a price of over $500. It got 8.7 mpg when I got it but that improved somewhat. It does run and ride nice and is more comfortable than the '73 Torino I had. Also, from what hear about the new Ford pickups, I guess I didn't get too bad a buy at that.”
Richard Vanee, Vermilion, Alberta: ‘The transmission knocks and the steering is terrible. It's hard to keep it between the ditches,” says Richard, upset with his 1979 Ford 150 pickup. “The dealer has had it in 11 times but can’t fix it. He contacted Ford but they say it's alright. The dealer agrees with me but Ford won't do anything. Next time we'll try a GMC,” On the positive side, Richard nominates his Delaval milking equipment as a ‘‘best buy’, ‘This milking equipment is a pleasure to work with. We've had no herd health problems with our cows and dealer service has been outstanding. “Another product that's been a pleasure to own is our 2-60 White 4-wheel drive tractor. It’s been trouble-free and does a real fine job with a front end loader,” Richard concludes,
Charles Flaming, Paxton, Neb: “I'm a firm believer in having the best corn planter for the best yields and the Deere 7100 folding Max-Emerge planter does the job!" Charles told planter four years ago. What a difference in stand over our old no-till planter. There's no end to bragging about the uniform depth and even distribution of seed planted. We had the old Max-Emerge four years and just traded for a new model. You couldn't give me any other planter. One attachment that we added are the Acra Plant trash whippers. They allow us to plant in heavy trash conditions. We believe this planter has increased our yields by 20 to 30 bu. per acre.” On the negative side, Charles says, “My advice to farmers with late 70's model pickups is to keep them, Don't buy the 81's. They aren't worth it. Our new Ford 250 has a smooth ride for a 4-wheel drive but that's all, After 1500 miles, it started to use a lot of oil. The body is terribly tinny, it has a thin, poor paint job and we are experiencing small motor problems.”
Richard Van Ee, Vermilion, Alberta: ‘We've had 19 Fords in the past but we're going to try a GM this spring,” says Richard, upset with his 1979 Ford F'-150 pickup. Gas mileage is great but the steering is the worst I've ever seen, It's all over the road. We've had it back to the dealer 13 times but they say they can't fix it and told Ford Motor Co. about it. They say it's all right but it isn’t. I feel this is Ford's problem and they won't look after it. “Another bad buy was my Massey Ferguson 1135 tractor,"’ Richard continues. “The rear end, the hydraulics and the pto have been nothing but trouble. We've spent about $4,000 to $5,000 on it and the tractor has only 1,500 hrs. on it. wouldn’t have another."
Leo Wilcox, Camrose, Alberta: ‘In May 1976, I bought a new Ford 8600. Within a few days, due to water in the system, the brakes failed. In July of the same year, the transmission locked up because a bracket broke and went through some gears. Also, the mechanic found a spare clip in the bottom of the transmission, The bracket that broke had primer paintin a crack in the bracket. This had to bea faulty part put in at the factory. From May 1976 to Sept. 1976, we were able to put 67 hours on the tractor. “In June of 1977, the clutch became very rough and jumpy. When it was dismantled they found the clutch plate split from center to outside. In April 1978, the clutch again went out due to a lot of rust and corrosion. ‘In November of 1978 I traded the 8600 off on a 4240 John Deere. At trade-in the Ford had 1256 hrs. on it. This tractor caused me more trouble than all the other machinery I ever had.”
M.C. Campbell, Orotoks, Alberta: “The ease and speed with which a heavy crop could be taken off was impressive. Easy to unplug, lots of power and clean threshing,” reports Campbell, pleased with his IH 1460 combine. He's disappointed, however, with his Ford 4600 tractor with front end loader. "It's underpowered for a loader or rototiller — could never keep the hydraulic system working. The front end loader is poor, with injectors that come loose continu ously. Has a poor system for emptying condensation from the fuel system. The clutch assembly is very weak and we replaced two clutches in one year. Service is extremely poor and expensive. Very economical on fuel, though.”
Ed Tschetter, Star City, Saskatchewan: “Our ‘best buy’ is the Ford 642 combine. We have four of them," says Ed. ‘They seem to out perform other machines their size. Dealer service is excellent. When had a problem, they gave me another machine till it was fixed."
Philip Chasse, N. Battleford, Saskatchewan: "Our most upsetting © purchase has been a Louisville 700 Ford 3-ton grain truck,” says Phillip. “A piece of metal was left in the water pump at the factory, and at 9,000 miles this piece of metal broke the impeller. Our cost to repair it was $150. At 11,000 miles, three pistons lost compression, yet it wasn't using oil. Repair cost? $1,200, with no warranty on either breakdown. The motor has had no power since day one. Dealer checked the ignition and fuel pump but no results.”’ Francis E, Griffin, Champion, Alberta: “I'm pleased with my Oldsmobile diesel. I've driven it about 50,000 miles and it has performed great.”
David Nelson, Evansville, Minn: “I don't have a carsol use this pickup as my transportation and workhorse,”’ says David, pleased with his 1978 F250 3/4-ton Ford, “It has a 300 cu. in., 6-cyl. engine and a four-speed transmission. had overload springs installed by the dealer. Mileage and performance are excellent. “The dealer is not just a fast talker looking for a quick sale. When you walk into his place six months later. he knows you.”
Cyril Schank, Fallon, Nev: Cyril's happy with the Ford 6600 tractor he bought last year to work alongside three other Fords in his “tractor stable’. ‘We have a Ford 4000, 5000 and 9600, besides the new 6600, Maintenance is much easier on the Fords and many parts interchange. We especially like the way the 6600 runs our 466 John Deere pto baler. It turns out 100-Ib. or better two-wire bales that are uniform and just what the hay truckers and buyers want. “We average about 600 hrs. per tractor per year, using the 6600 and 4000 daily to feed cattle. The 5000 has a cab and is turbo charged. With about 7000 hrs. on it, it’s never been overhauled and does all our plowing. The 9600 was pur- chased used and does all our disking, ripping, haychopping, and pulls a 14-ft. Towner scraper.” On the negative side, Cyril's disappointed with his Long 460 42-hp. diesel tractor. ‘‘We had purchased our second hand Ford 4000 the year before and used it to do the same work as the new Long 460, which cost nearly twice as much as the Ford with 4,000 hrs. on it. Today, the Ford is still going strong without having had a fraction of the maintenance needed on the Long. “When we could get the Long started it was fine, but half the time it wouldn't start. The first year, while it was under warranty, several things failed, including the pto clutch, electrical system, and battery. They were good at fixing it up for us but the down time was costly. After the guarantee ran out, it lost still another clutch and had more breakdowns that always cost $500 or more to fix. Getting parts was slow. It doesn't pay to buy foreign equipment.”
Quinton Nelson, Stitzer, Wis: ‘'It's just like driving a Cadillac,’ says Quinton about his 8700 Ford tractor. “Lots of power and easy on fuel. Both the cab and hydraulics are super. No breakdowns in 18 months, ‘We're pleased, too, with our 6620 John Deere sidehill combine purchased last fall. Works great, with well-designed cab and controls. Runs smooth and comfortable. Also, our John Deere 7000 Max Emerge is the best planter we've ever used."
Martin Wright, New Salem, N. Dak.: ‘‘My worst buy is my New Holland 320 square baler with hydraulic tension. The baler has plungers runee linate ning at up to 105 strokes per min. with the tine bar at the same speed and you cannot keep this rear assembly together. I can’t keep it running. Dealer service has been fine but we still can't bale much hay.” He's pleased with his 1979 Ford 150 4-wheel drive pickup, despite some problems. ‘I've driven Ford pickups for a long time and have had good performance but the engine went out of this 1979 at 6,000 miles and had to be replaced. My dealer did a good job and performance since has been excellent.”
Clyde W. Smith, Thomasville, Ga: “This tractor has no lugging power, the power steering and hydraulics are no good, and I'm generally very dissatisfied with it. The only things good about it are the Armstrong tires,"’ says Clyde about his 7700 Ford tractor.
Donald W. Parker, Apple Springs, Tex: “This tractor was in the shop two months out of 12. can't use “This tractor was in the shop two months. I can’t use equipment like this.”’ equipment like this,’ says Donald about his Ford 6700 tractor. ‘‘A reliable dealer could have prevented many of the problems.” He's pleased, though, with his Deere 4040 tractor. ‘‘Handles like a dream. Had one minor problem with . hydraulics and the dealer sent a mechanic out and had it repaired with only two hours down time.”
Randy Watkins, Sunburg, Minn: “No questions about warranty were ever asked,” Randy says, happy with the purchase of his TW 20 Ford tractor. “Dealer service was excellent on the few minor problems we had."
David Norris, Palmetto, Fla: “We've hauled more than 500 loads from our 600-cow dairy with no troubles,” says David about his “best buy’ 200-gal. Lely honey wagon. “We're also pleased with our John Deere 336 baler, In three years, it has baled 15,000 bales a year and been almost trouble-free. We also like our 1977 Ford 150 pickup with supercab. Rides great and hauls loads well — 55,000 carefree miles so far.’’ On the minus side, David's disappointed with his ‘‘Vacmeer milking vacuum pump. It corrodes from hard water, and needs repair every few months. There's no repairman in the state to do the job right.”
Donald Carder, Continental, Ohio: “We really like this plow’s clearance in plowing stalks as well as the moveable hitch for adjusting width of the first furrow. We also like the way it lays the furrow as you plow," Donald told FARM SHOW about his “best buy" Ford plow.
Russell Wagner, Jr., Pleasantville, Ohio: ‘This tractor is rated at 160 hp but we checked it and it’s closer to 200 hp,” reports Russell about his “best buy’’ Ford TW30 tractor. ‘Has an outstanding cab, great visibility and is very dependable. I also have a 1966 4000 Ford and a 1972 9000 Ford and have had great service out of both. Dealer service is excellent.”
Keith L Pence, Somerville, Ohio: “I'd like to nominate my new Ford 352 4-row corn planter as my worst buy ever,’ Keith told FARM SHOW, “On the first day in the field, it took me five hours to plant four acres, Chains would not stay on the seed or fertilizer drives, disk markers and openers fell off, and the seed drive shaft broke. Dealer service was poor, as it took seven days to get a replacement shaft. This is the worst designed piece of machinery I've ever seen. It skipped rows and did everything but work right.”
Joe Hay, Bangor, Mich: Joe's “worst buy” nomination goes to his “Ford power washer. The third time we used it, the handle broke. Then it stopped and we had to take it apart to be able to push the reset. The next time we used it the pump developed a noise. Went back and told the dealer and he laughed and said, ‘Yup, those things are no good. You ought to buy a better one’."” On the brighter side, Joe’s pleased with his New Holland grinder-mixer. “They built it with the farmer in mind. Easy to run and service, and runs smooth and quiet. Best of all, the dealer won't forget who you are after the sale is made.”
John Lemmermann, Helena, Ohio: “We used this piece of equipment on more than 600 acres of cropland last year and found that following fall tillage, one pass in the spring provides an excellent seedbed. The best part is that this piece of equipment is handled by the same dealer that keeps our New Holland TR 70 combine and Ford tractors in top shape," says John about his ‘‘best buy" Kongskilde, Triple K 21-ft. field cultivator, > YOU CAN USE nly selected 5 “tell it like 1 nominating pest” and ” buys. old Johnson OT k Newhall ociate Editor ers Now Worst B
Robert Morrison, Freeport, Penn: “Poorly made. Had to be straightened or welded every time we took it out — just to push snow, Have it pretty well reconstructed now," Morrison reports about his Kewanee 8-ft. blade. On the other hand, he nominates his Ford 7700 tractor as a “best buy”. “An all-around good machine that's comfortable to operate and has plenty “An all-around good machine. Comfortable to operate and has plenty of power.” of power. Had some clutch problems at first but Ford service straightened things out.”
David Marvin, Medina, Ohio: “The radios work fine but some people in the Motorola organization can't seem to do anything right,” says David about his Motorola business radios. ‘After phone calls to several departments, am still being billed for things I don’t owe. I also haven't received a refund yet for radio installation [ contracted for and had to do myself.” On the plus side, David's happy with his Ford 8700 tractor. ''This tractor has a quiet comfortable cab. Dealer service has been excellent on the few minor problems I've had."
Ralph Paarlberg, Grant Park, Ill.: This plow has never donea good job and, in spite of three of four tries by company servicemen, it’s still not right,”’ says Ralph about his “worst buy” White 598 plow. “The local dealer agrees it's not right but has never corrected the problem. After one season's use, he did replace the backbone because the pivot point of the third bottom was welded on at an angle instead of vertically. It still leaves a dirty and uneven furrow and depth cannot be changed without making mechanical adjustments on the tail and gauge wheels. The last letter received, certified mail from White, told me ina nice way that they will do nothing more to try to correct the problem, feel I paid for a new “Cadillac” and got a junked Ford. “T do like the spring automatic reset bottoms on the plow, however, and also the hydraulically adjustable width of cut.”
Gary Domnick, Morris, Minn: “I'm very disappointed with only 7 mpg on the highway, and 5 mpg in town,’ Gary told FARM SHOW about his 1979 Ford 250 4 by 4. “It should have had four gas tanks instead of just two. On a recent cross-country trip, we ran into a bind with only a 200 mile range and most stations closed. Also, the 400 cu. in. motor has no power.” Gary's pleased, however, with his Stihl 041 Farm Boss chain saw. “The finest I've ever seen — makes woodcutting a pleasure. I've cut about 400 ash trees into firewood length. Have only had to sharpen the chain 5 or 6 times,”
Kenny Victor, Rogers, N.M: Kenny nominates his 9700 Ford tractor as a best buy: ‘Power is more than adequate, hydraulics dependable, and the Dual Power transmission extremely handy in varying soil conditions, and for jobs such as baling hay with varying windrow density, Cab visibility is the best I've seen and all controls are conveniently located atthe right hand. Lots of comfort with the new quiet and dust-free cab design. “I'd like to see a different brand of tires as original equipment, though The Armstrong tires on our tractor showed severe cracking after just one year of use,"’ Kenny points out,
John B. Blanton, Gaffney, S.C: “Has a powerful diesel engine, strong lift, quick hook-up, is easy to handle, turns short and is quick with its oil brakes,” reports John about his Ford 5000 tractor, which he bought used. “Does large or small jobs economically.”
Marion M. Taylor, Spotsylvania, Va: “I've owned five Ford tractors since 1970 — a 3000, a 4000, two 5000's and an 8600. I still have one 5000 and the 8600, Ford has given me rotten service and I’m switching to John Deere mainly because of service that I can count on when needed during the busy season. I farm 1,100 acres of corn, wheat, soybeans and hay, so when the sun shines, we have to roll. And that means service on equipment when you need it.” Marion’s also disappointed with his Ford 230 1612-ft. disc harrow with fold-up wings. ‘I put five bearings in last spring and lost another during fall planting. Also, it sways and bobs up and down on the road like a seesaw. Ford Motor Co. has given me poor service.” Heading his ‘‘best buy” list is his Deere 2840 tractor. ‘I’ve used this tractor on just about every job on the farm, from cultivating beans to chopping silage. Has plenty of power and handles like a dream. Runs quiet and I don't have aringing in my head after operating it 10 to 12 hrs. a day like another brand I have. Dealer gives top service.”
Duane B. Miller, Glenburn, N.Dak: ‘Eliminates a second truck in the field and transfers a load in about 20 min.," says Duane about his Anderson 225 bu. gravity flow grain box. “Compared to a truck, the price is quite reasonable. Real satisfied." He's also pleased with his Leon 707 Quick-Tach loader. ‘We use it for rockpicking and push a lot of snow with it.” On the minus side, he’s had trouble with his 4-wheel drive Ford pickup. "Works alright and has good gas mileage, but I've replaced the carburetor and 3 or 4 seals in the transfer case in the first 20,000 miles. Also, the seat covers are torn and cracked in the seams.”
Ed Mitch, Cut Bank, Mont: Ed's a farm equipment dealer and feels it would be unfair to comment, good or bad, on machinery but says, ‘‘l sure like FARM SHOW’'s ‘Best and Worst Buys’ report, hope some of the man“We get tired of manufacturers that take a ‘don’t care’ attitude.” ufacturers pay attention to the complaints. As dealers, we get tired of manufacturers that take a “don't care” attitude and won't answer letters or return phone calls.” Bobby McCampbell, Knoxville, Tenn,: Heading his “best buy” list is his 350 Ford pickup bought in the spring of 1978. “With an automatic transmission and 460 cu. in. engine, it pulls a gooseneck trailer with ease. Has nearly 40,000 miles on it and still drives better than a car, even though most of the mileage was made pulling trailers. Very little spent for upkeep.” Ron LaDuke, Oneida, Ill,; “I really enjoyed combining beans and actually had fun running the machine! It may even encourage me to plant more beans next year,"’ says Ron about his “best buy" Deere 4-row 454 bean header. “Didn't have one problem in 300 acres and I know it saved more than enough beans to pay for itself. With no reel to watch, it sure made a difference in driver fatigue, especially at night. Extremely pleased."
Richard E. Adams, Winnebago, Minn: He's happy with his new 1979 Ford F-100 pickup. “This is the second one I've had. The first one ran 13 years. Ford's 6-cylinder motor is hard to beat.” On the minus side, he says ‘‘Basagran herbicide is good stuff when it works, but is highly unpredictable.”
LaVerne Waters, Middleport, N.Y: He's happy with his New Idea 218 tandem-axle manure spreader. “We use it every day, year round, here in western New York where the weather is not always the best. There have been no problems and few adjustments. Bought it to replace a Ford 340 which we could not keep out of the shop.”
M. G. Martin, Colwich, Kan: His “best buy” is a 1976 Honda station wagon. ’ Creat gas mileage and excellent handling. Like the good design and durable construction, although it could ride a little smoother." On the .egative side, he is disappointed with his Ford 750 truck. “We lost the engine at 36,000 miles because of poor construction and design. It seems as though American manufacturers cut corners and then charge more than the limit. Ford did replace the engine parts.”
Lester Wehr, Keota, Iowa: Lester likes his Ford 9700 tractor. ‘This is the most trouble-free tractor on the market. Never a breakdown in the field and it has more power than our John Deere 4440." He adds that his 1978 Ford F-150 pickup is also a “‘best buy”. ‘We have 40,000 miles on it and no sign of any problems. The best pickup we have ever owned.” Heading his ‘‘worst buy” list is his John Deere 4440 tractor. “At 100 hours the main bearings went and ruined the engine block, and al 300 hours the hydraulic system failed.” Lester also has had trouble with his Chevrolet C-20 pickup. “It was a lemon from the start,” he says. “The motor went out at 3,500 miles and two weeks later the transmission went out. Am buying nothing but Ford 150's from now on.”
David Zigler, Veedersburg, Ind: “I like the overall appearance, power, controls and quiet cab on my John Deere 4440 tractor. Also, it's nice to know your wile enjoys driving it as well as yourself.” Calvin Wegner, Beasely, Texas: *' bought a John Blue fertilizer attachment to fit on my hippers. It enables me to fertilize and hip my land in one operation. Otherwise, I'd have to run two tractors instead of one. Saves labor, fuel and time.” On the minus side, Calvin says, “I don’t believe I'll ever own another Ford, When the air conditioner went out on my F-100 pickup, the dealer charged me over $400 to fix it and messed up the heater in the process. It also weaved on the road and couldn't be fixed. Burned a quart of oil every 250 miles with less than 38,000 miles on it.”
James R. Berg, Colby, Kan: : "If the truck chassis was as good as the box would have no complaints,’’ says James about his Harsh 14-ft. feeder box. “It mixes the feed so that every handfull I pick out of the bunk is the same, There's a scale right on it."’ He says his ‘‘worst buy" is his “1975 LN 600 Ford truck, We’ve put four different engines in this truck since buying it in April of 1975. We also had to put a new different transmission in it.”
Wesley T. Kelley, Martinsville, Ill.: “T won't even look at a Ford or a Chevy now," says Wesley, who's happy with his 1978 Dodge W-150 pickup. “The gas mileage is great, it has the best transmission I've ever seen and the service is good,” Also on the plus side, he likes Amzoil synthetic motor oil. “You can go one year or 25,000 miles between changes, plus it gives you longer engine life and better gas mileage.”’
Ken Anderson, Center, Colo: “The 4-cylinder engine doesn't have enough torque and, after 30 hours of work, the shaft broke in the injection pump just when we needed the tractor,” reports Ken about his Ford 5600. “As normal, the part has to be ordered from Kansas City so, more than likely, we'll be done with fieldwork when we get it.” Ken is well pleased with his Gehl 135 grinder mixer with bale feeder. “The capacity is good and the hydraulic motors sure beat chains and belts.” S-t/ FARM SHOW (11 1U CAN USE elected 1 it like linating and S. Johnson r We ec ce s Nor lorst B
Robert Celsar, Holland, Kty: “Iam completely satisfied,” he says of his Ford 7600 diesel tractor. ‘The main reason purchased it was the hydraulic system. With the 5000 Ford I traded in, 18 seconds were required to open the gate on my round hay baler. With the 7600, it only takes 7 seconds. It drives and rides like an automobile. Has plenty of power and is economical on fuel." on
Dan Hopp, Colville, Wash: “I couldn't get it fixed, so I traded it off for another brand,” says Dan about his 7600 Ford tractor. “It burned too much oil and the transmission, which was a constant-mesh 8-speed, ran so hot you couldn't tough the gearbox. Neigher the dealer nor Ford Motor Co. would fix it.”
John Ziegler, Newton, Wis: He's happy with his New Holland 1400 combine (‘‘Does a good job of gathering and cleaning, and has good capacity”) but notes that he has had trouble getting grain to go up the feeder into the cylinder “Also, the engine — a Ford diesel — loses its prime and is very hard to start.”
J. Lamar Norris, Elmore, Ala: He's disappointed with his Ford 9600 tractor. “The hydraulics are defective. Dealer has worked on it on two occasions and has since quit trying to fix it.” On the other hand, he's happy with his “best buy” Case 1370 tractor. “Always performs like it should. A good tractor,”
Walter Shockley, Jr., Salisbury, Md: He says his 1977 Ford 250 4WD pickup is ‘just about indestructible. We've never been stuck in sand or mud with it, and we carry loads that are unbelievable. My friends and neighbors say I need a tank and that I should be ashamed to treat a vehicle so badly. haven't had to take it to the shop since the day bought it.”
Paul Hinderer, Waterville, Wash: He nominates a 1977 Ford 350 oneton truck as a “worst buy”. “The cab is wide and the seat is comfortable until you have three big men in it. The seat is too short for the cab. The turning is terrible. Our two-ton trucks can turn easily inside of this small one-ton. The rear-end ratio is for 70 to 75 mph driving. This makes the truck act like a 3-speed transmission with an overdrive.”
Wayne Lane, Elizabeth, Colo: “Our new Deere 7700 combine this year was our third new John Deere in four years. As with the others, we have had excellent service from the machine and fantastic help from dealers all along our custom harvest route, I'm sure we'll continue to buy Deere combines. “One of the worst buys ever made was 4 1978 3/4-ton Ford pickup with a 400 CID engine, It was never completely put together at the factory The front end was loose and the clutch was never properly adjusted, The dealer never did a pre-delivery prep and never had time to fix the wrongs. This was the eleventh Ford I've owned in 10 years but now I'm looking at Chevrolet.”
Fred Pimm, Rock Tanern, N.Y: He notes that he’s well pleased with his Ford 6600 tractor. “The cab is quiet and well constructed but would not recommend Armstrong tires or tubes toanyone. One rear tire went flat with less than 50 hours. Tube ripped because of a thin spot. Ford would not recognize and neither would the local Armstrong dealer.” On the negative side, Fred lists a Ford baler Model 542 as a worst buy: “Both knotters miss too much, Had a Ford mode] 530 with about 150,000 bales on it that I] wish I had back."
Donnie Collins, Centralia, Mo: ‘“‘We saved several thousand dollars by buying a Ford 8700 tractor instead of a John Deere or Allis Chalmers model of the same size. We own a John Deere tractor and three Allis Chalmers but the Ford 8700 is the only one that has gone a full season without a breakdown. We were so satisfied we bought a Ford 9700 to go along with the 8700,” Donnie adds that he’s ‘very pleased with our Deere 7700 planter, especially last year when planting was late. We could easily plant 90 acres in a half day, leaving the other half to work our ground.”
Ralph Roschen, Lake City, Minn: “We bought a Ford 8700 tractor about a year ago and we're well satisfied with it. It’s economical to operate, handles great and has plenty of power. The dealer's service has been excellent.” Ralph adds that he would like to “T wish all machinery would come with regreaseable bearings.” see an end to completely sealed bearings. “I wish all machinery would come with regreasable bearings. The sealed bearings just do not stand up.”
Charles Archibald, Pine Tree Ranch Co., Gillette, Wyo: ‘This machine has required less adjustment or repair than any machine ever bought. The company should be commended on their quality control,”’ says Charles of his ‘best buy” Hesston model 6200 windrower. His only complaint is that “the grease fittings are almost inaccessable”’. Charles nominates his Dodge D200 pickup as a worst buy. “It was poorly constructed and warranty work was not done. It has been impossible to keep this engine turned. In the past, our pickups have run over 100,000 miles. This one is shot at 45,000. After buying and driving Dodges for 50 years, this family is going to Ford,"
Lewis Donaldson, Hackettstown, N.J: Lewis Donaldson, Hackettstown, N.J.: He's “sold” on his Ford 9700, “The first Ford tractor I've owned. The power this tractor has is unbelievable. The cab is excellent and noise free, and it has a very good air conditioner.” Lewis is also happy with the Ford 150 pickup. “It’s a 6 cyl. — have owned several Ford pickup trucks before but they were 8 cylinder,”
Harley Franklin, Daleville, Ind: Harley Franklin, Daleville, Ind.: He applauds the dealer who sold him a 9600 Ford diesel tractor. ‘The third day went to work with it, it died in the middle of the road, came back home and called the dealer. Within
William Chalmers, Choteau, Mont: William Chalmers, Choteau, Mont.: Heading his “best buy” list is a set of Sears Road Handler radial tires he bought for his Ford 150 Supercab, 2 wheel drive pickup. “These are a soft rubber tire with no studs. They provide good traction and footing on glare ice and snow.” William faults his International 241 big baler “for failure to start feeding in wild hay or straw. Also, the upper rollers are impossible to keep clean. spend all of my time off the tractor unplugging it.”
William Ruther, Delanson, N.Y: William Ruther, Delanson, N.Y. “I pull wagons in and out of the field without trouble. It has an automatic transmission which saves me getting out to lock in the front wheels. It's almost like an extra tractor.” 1977 Ford % ton: “A real heavy pickup (8100 Ibs. GVW) that drives and rides like a car. reports
Donald Burgess, Carthage, N.Y: Donald Burgess, Carthage, N.Y.: He thinks New Holland could make a good machine even better by putting better tires and a better hitch on the Model 479 Haybine: ‘The machine worked alright but everytime I wanted to use it, would have a flat tire. They used such a cheap grade of tire. Also, the hitch was so weak it bent and folded." Donald's new Ford 7700 tractor with cab also earned a ‘best buy” nomination: “I used it filling silo last fall and was very pleased with its dual power transmission for chopping. was real pleased with quietness of the cab and visibility from the cab.” (Continued on page 30)
Jon Kenney, Dixon, Ill: Jon Kenney, Dixon, Ill: He reports “absolutely no trouble” with his recently-purchased '78 GMC 3/4 ton, 4-wheel drive pickup: “I can't believe it's this trouble free.’ Jon is also pleased with his 1976 Ford 3600 utility tractor. “Only had one defect —an O-ring on a plug on the hydraulic system. I don't like the two shift levers orthe governor.” rle equipped the tractor with a dual manure loader which, he says, “is slow lifting and slow tipping the bucket. On the plus side, it mounts easily to the tractor.” He’s been disappointed with + 5-Star Tiller Rod" he bought to level ground behind a field cultivator; “It worked okay in ground which was in soybeans the previous year, but on ground in corn the previous year it plugged up.”
Norman Culverwell, Craig, Colo: Norman Culverwell, Craig, Colo.. says his new Stieger Cougar is “the ultimate in a farm tractor. It’s comfortable, quiet and the caterpillar en“Tt’s been longer than 12 months but the lemon taste lingers on.” gine has a sufficient amount of power for any job.” Norman notes that he’s unhappy with his Allis Chalmers hillside combine which. he says, “gave problems from the minute it was put to work. The block man was called several times but never showed up. Most problems were related to the hydraulic system.” Norman also faults his Melroe plow, noting that “it broke up and wore out all over. The manufacturer claimed the dealer didn't have it adjusted properly. The dealer did several repairs and lots of welding on pieces that should have been replaced by the factory.” “Pearce Equipment at Clay City has taken good care of the service,”’ says Stanley Greathouse, Johnsonville, lll, who nominates his Case 1370 tractor as his “best” buy: “I've used this tractor one year and have been happy with performance and horsepower. It has a good cab, heater and air conditioner,” Dealers were directly responsible for “best” and “worst” buys nominated by William Allegar, Benton, Pa. He’s happy with the dealer he dealt with in buying his Ford 5000 tractor: “Had a few problems with it but the dealer was very cooperative. Fuel economy is very good and I'll be back for further business.” William is unhappy with after-the-sale service he got from the dealer who sold hima new IH 400 Cyclo air planter: “It developed a hydraulic oil leak when lifting the planter. Dealer didn’t want to know me after I paid cash for the machine.” That same make and model planter was one of the “best buys” Sackreiter Farm, St. Charles, Minn., has made: We planted over 300 acres of corn in a few short days and everything worked like a clock after a few minor adjustments," says Leon Sackreiter of their new IH 400 Cyclo 8-row air planter. ‘The Dickey-john monitor was well worth the extra investment.” Leon notes that a Gehl 2500 skid loader, purchased 8 months ago, “works very well when everything
Robert Bennett, Meigs, Ga: Robert Bennett, Meigs, Ga., likes his 4430 John Deere because “it's quiet, dependable and powerful. This is my first John Deere tractor.” He faults his 8600 and 9600 Ford tractors for being noisy, and the 9600 for clutch problems.
William Gallop, Boyne Falls, Mich: William Gallop, Boyne Falls, Mich., is well pleased with a Ford tractor he bought three years ago, except for the starter: “I’ve had to re
Wilburn Ludlum, Jr., Moran, Kan: Wilburn Ludlum, Jr., Moran, Kan., who nominated a Ford 642 combine as his “best’’ buy: “It has lots of capacity, adjustments are easy and it does a nice job of threshing. And, I've received excellent service from the Ford dealer,” His practice of ‘‘dealing with dependable dealers” also paid off in the Ips Use purchase of a 12 ft. Bush Hog chisel plow he wasn’t happy with because of “too light material. Bent the frame and broke bolts that hold the shanks.” The dealer took it back and sold him another chisel plow better suited to Ludlum's soil conditions and tractor size. “My dealer has taken care of all the problems so far,"’ reports
G. O. Kalcinski, Camden, Mich: G. O. Kalcinski, Camden, Mich., says his “best buy’’ Case 1370 has given excellent fuel economy, averaging about 7 gal. per hour. He also likes its ease of handling, with all the controls on the right side of the seat. Two farmers who nominated Ford tractors as their “best" buy both cited fuel economy as a key reason: Says
Wesley Walmsley, Norfolk, Neb: Wesley Walmsley, Norfolk, Neb, agrees, citing fuel economy and ease of handling as real ‘‘pluses” of his 9600 Ford tractor, He’s disappointed, however, in the tractor's draft sensing mechanism (‘It’s one of the slowest I've been around”) and the cab (“Which they finally improved"’). +. PABMSHOW
Kenneth Crandall, Sterling, Colo: Kenneth Crandall, equipment manager for E.E. Sonnenberg and Sons, Sterling, Colo. On the negative side, he faulted Fairbanks Morse solid state magnetos which come on Caterpillar G333 natural gas “They said it was one of the best balers they had seen.” irrigation engines.’ Crandall says the units ‘twill only run two to three weeks, We've replaced them with better, less expensive and less complicated magnetos.”’ 642 Ford combine — “‘It’s well designed and I'm very well satisfied,” says Wilburn Lundlum, Jr., Moran, Kan. Several respondents who nominated ‘best’ buys didn’t want their names used. Their nominations included: New Holland 850 big baler: ‘1 do custom work and everyone I baled for had me back to do more, and they said it was one of the best balers they had seen.” Century trailer type field sprayer: “We have a 400 gal. tank mounted on it with a built-in agitation system. It’s also equipped with a centrifugal pump for high volume spraying. The pump is mounted right on the sprayer with a power shaft to the tractor, which makes for fast, easy hookup.” John Deere 4430 diesel tractor: “Excellent tractor, The cab is very _ satisfactory. Easy to steer and great hydraulic system.” Nachurs plant food; “My experience has been super. The soil testing service that goes with it is the best I've seen,” I-l-Apz @
Ford F-150 truck
134 Best Buys39 Worst Buys“I’m still driving my 2017 Ford F-150 truck with 110,000 miles. It’s had only one problem…”
“I bought a new Ford F-150 in 2014. It’s a 4-door 4x4 with a 5 1/2-ft box. The 5.0L motor is really good. With almost 240,000 km (149,000 miles) on it, I’ve changed the spark plugs once for sure. Otherwise, nothing on the motor. The body is showing a little rust, unfortunately. I replaced the exhaust with a Flowmaster. I wanted a little rumble in the back, but not a loud snap. I’m very happy with how comfortable it is to drive. If you’re looking for a good motor in a vehicle, this is one for sure.”
“My work vehicle is a 2005 Hyundai Elantra. I’ve driven this car across creeks, fields, and reclaimed strip mines. It just turned over 200,000 miles. Except for the alternator and radiator, nothing on this vehicle has been replaced. It doesn’t use even a quart of oil between 5,000-mile oil changes. It’s the best vehicle I’ve owned.
“My 2011 Ford F-150 was a total piece of junk inside and out. Due to a design flaw, not enough oil got to the top end of the engine. It made a constant ticking noise; it sounded like a diesel. It also had a very cheap interior.”
“My gas-powered Ryobi power head with multiple tools starts easily, and it’s easy to change from weed wacker to rototiller to brush hog. I also like my 18-volt grass and hedge trimmer. It’s great for precise and fast garden weeding.
“One of my worst buys ever was my 1997 Ford F-150. Everything leaked - manifolds, gas tank, fuel lines, brake lines and reservoir, transaxle, engine oil and more.”
“I have a 2017 Ford F-150 super cab pickup with a Leer deluxe camper shell on it. This truck has all the power with a V-8 engine and 6-speed transmission. It gets good gas mileage. It’s the most comfortable riding truck I’ve ever owned. I’ve owned several Ford pickups in my lifetime and have had no problems with any of them except a 2004 F-150 that had the air conditioner compressor clutch go out after 14 years and 160,000 miles.
“The worst pickup I ever owned was a Chevy S-10 with the 4.3-liter engine. The battery failed first and then the brakes gave out. The engine lost oil pressure due to a clamp on the oil cooler line which chafed through and leaked the oil out. The dealer replaced the line under warranty, but the engine has used oil ever since the repair. The truck had less than 40,000 miles when I traded it.”
“My best buy is a 2016 Ford F-150 with 5-liter V-8 that I bought used. It’s an excellent, dependable truck with a roomy ride, and I’ve had no problems with it. I use it all the time on my sheep farm.
“My 2019 Dremel multitool ran two times and quit. I replaced it with a Harbor Freight model and have had absolutely no problems with it.”
“My 2010 Ford F-150 with 315,000 miles is the best pickup I’ve ever owned. I change the oil every 4,000 miles and the oil that comes out of the engine is almost as clean as that going in.”
Read the whole story →“My Ford F-150 with 4.6L has been the most reliable vehicle I’ve owned. It’s been in the family since it was new. It now has 120,000 miles with only regular maintenance. It’s quite underpowered but with the few issues it’s given me, I can’t afford to move it down the road.
“The Cabela’s size 32 meat grinder is advertised as ‘commercial’ and worked well for the first 30 min. each time I used it. It then progressively got weaker and weaker. After talking to the company rep, I found out the duty cycle is only 60 percent. That’s good for deer but not good enough for pig or beef.”
“My best buy is my 1942 Farmall H. I use it for plowing and disking my small farm.
“I also have a 1983 Troy-Bilt tiller that still runs well, and my 2010 Ford F-150 truck has 300,000 miles.”
“We’re in our 70s and this is the best car we’ve ever owned,” says Merrilyn about their 2016 Chevrolet Corvette Stingray equipped with a 6.2-liter engine and automatic 8-speed transmission. “It has all the bells and whistles we’ll ever need. It also has the smoothest ride we’d ever want, and the power and speed is always there if we want to use it.
“Several years ago we bought a 1979 Ford F-150 pickup equipped with a 302 cu. in. engine with overdrive and a standard shift transmission. It worked fine going down the highway but if we needed to go up a hill, we were lucky to get to the top. Same thing in traffic – the engine was a mess. But we solved the problem by repowering it with a Cadillac engine and transmission. No more problems, and now we have all the power we’ll ever need.”
“My 2019 Ford F-150 is the 17th Ford pickup I’ve owned over the years. Some were bought used. I’ve also owned some Ford cars. All my Fords ran good.”
“My 2019 Ford F-150 pickup rides 10 times better than my 2014 GMC 1500, and I sure hope the brakes and rotors last longer. I’ve owned 3 different GM 1500’s in the last 10 years, and the brakes and rotors didn’t last much more than 28,000 miles on any of them.”
A 2007 Toyota Tundra pickup equipped with a 5.7-liter engine rates as Gary’s “best buy”. “It replaced my Ford F-150 and performs as advertised with good fuel efficiency, power and reliability. I use it mostly to pull heavy farm trailers.”
“Our ‘best buy’ is our 2005 Ford F-150 pickup equipped with a 5.4-liter Triton engine. We bought it used with about 28,000 miles, and now it has more than 410,000 miles even though it pulls a 16-ft. utility trailer at least 25 percent of the time. All we’ve replaced are the alternator, fan clutch, battery, front wheel bearings, a couple sets of brakes, 2 sets of spark plugs, and a small grommet in the windshield washer tank.
“The engine still runs great without using any oil, and the transmission still shifts smooth. The pickup also drives straight, without any shaking or rattling. In the past I was a huge GM fan, but after our experience with this pickup we bought a new 2015 F-150 equipped with a 5.0-liter engine. It already has more than 200,000 miles on it, and all we’ve replaced are the battery and starter. The electronics on it still work great.”
Michael likes his 2000 Arctic Cat ZR 600 snowmobile. “I’m 53 years old and enjoy the older-style snowmobiles. This one is fast, easy to start and handle, and rides great. Best of all, it’s paid for.”
On the “worst buy” side, he lists his 2011 Ford F-150 pickup equipped with a V-6 engine. “I previously owned an F-350 Lariat equipped with a diesel engine, but it got totaled out in an accident. Compared to the F-350, the F-150 is more like driving a car because you sit lower to the ground. Also, it has poor fuel economy for a V-6 at just 15.2 mpg. Now it’s rusting bad, and taking care of that problem would cost about $3,000. The transmission is acting up, too.”
“I’ve been driving pickups for about 60 years, and this one is the best ever,” says Joseph about his 2004 Ford F-150 pickup equipped with a 4.6-liter, V-8 engine. “It has about 187,000 miles on it but still runs great. Doesn’t leak a drop of oil.”
“My 2017 Ford F-150 with V-6 and 10-speed runs well and is quiet and comfortable for longer trips. It can tow about 10,000 lbs.
“I have a couple of Homelite machines, a chainsaw super XL and a rototiller. They’re both over 40 years old but still useful. Parts are available on the internet if you are persistent.”
“My MTW 10-ft. wide pto-driven soil conditioner power rake (www.mtwpowerboxrakes.com; ph 715 536-9916) does a fabulous job leveling ground, knocking out gopher mounds, pulling roots, and general landscape leveling. It is a bit pricey, though.
“My 2018 Ford F-150 6-cyl. EcoBoost has great power and fuel economy, an easy-to-use touch screen, comfortable seats, and a smooth ride. I have 40,000 miles with no repairs.
David’s 2013 Ford F-150 pickup equipped with a V-6 EcoBoost engine has about 180,000 trouble-free miles on it. “It rides and drives well. The engine is fuel-efficient and performs great.”
“I own a 2004 Ford F-150 pickup equipped with a 6.2-liter engine. It has just over 200,000 miles on it but still doesn’t use any oil. The clutch was replaced at about 130,000 miles.”
“It drives well and has a smooth ride,” says Stanley about his 2014 Ford F-150 super cab, longbed pickup equipped with a 5.0-liter engine and 6-speed transmission. “It averages 18 to 20 mpg on the highway. I’ve driven GM products for 50 years but the company couldn’t sell me the pickup I wanted, which is a 1/2-ton extended cab longbed model. I can’t get used to a pickup that’s equipped with an extended cab and shortbed. They look so lop-sided.”
“I bought my 2010 Ford F-150 crew cab pickup used in 2014 with about 108,000 miles on it. I’ve put on about another 100,000 miles with no problems.”
Vern nominates his 2012 Suzuki King Quad 500 4-WD ATV as his “best buy”. “I use it to spray weeds, fix fence, and for irrigation work. No problems. Neighbors with other ATV brands spend much more on repairs than I do. This one has power steering which is a definite plus, and because of the 4-WD with differential lock it has never been stuck.
“I really liked my 2004 Ford F-150 pickup equipped with a 5.4-liter Triton, 24-valve engine. However, at about 180,000 miles a camshaft phaser failed, causing major damage. An engine overhaul would have cost about $7,000 and a used engine $3,500. I own other Ford pickups with well more than 200,000 miles on them, and they’re still running.”
“My 2002 Hyundai Sonata and 2012 Kia Sportage SUV’s are outstanding vehicles. My 2015 Ford F-150 pickup worked great. However, I needed more power to tow a fifth wheel camper so in 2017 I traded it for an F-250 model equipped with a diesel engine.
“My Mahindra 4025 tractor runs great. Starts right up even after sitting in the barn for 2 or 3 mos.”
“A couple years ago I bought a used 2013 Ford F-150 crew cab pickup equipped with a 3.5-liter Ecoboost engine with about 39,000 miles. It now has about 75,000 miles. This pickup has a lot of power and averages 23 mpg on the highway. Rides and handles great.
“My 2014 Kubota RTV 400 4-WD utility vehicle equipped with a winch is a real workhorse. I use it every day. It’s easy on fuel.”
“I’m well satisfied with my 2009 Deere 6430 tractor, which I bought used in 2015. It has excellent power, a nice cab, and the infinitely variable transmission is outstanding for tillage, baling and spraying.
“I’m also impressed with my 2017 Ford F-150 pickup equipped with a 2.7-liter Ecoboost engine. It has a lot of power and is fuel efficient.”
“My fuel dealer has been making ethanol-free gas available to commercial customers for the last 2 years. I think that gas without ethanol is the only way to go. Small engines and 2-cycle products love it. It helps prevent fuel system problems and keeps well. Some customers are seeing a 10 to 15 percent improvement in fuel efficiency in their vehicles.
“One month after I bought my 2017 Ford F-150 pickup we were caught in a heavy rain. Water leaked through the cowling and soaked the body control module inside the cab, causing everything electrical to immediately shut down. My pickup sat at the dealer for 1 1/2 weeks waiting for parts. Fortunately, the repair cost was covered by the warranty.”
“It has been trouble-free and is built as rugged as any mower I’ve ever used,” says Milan about his 2016 Ferris IS 500Z zero-turn riding mower (www.ferrismowers.com; ph 800 933-6175). “This mower is a beast and mows high grass and tall weeds with ease. It’s expensive but worth the money.”
On the minus side, “I own a 2015 Ford F-150 pickup equipped with a 3.5-liter Eco Boost engine. The engine is a gas hog, and the Ford SYNC voice-activated technology is a nightmare to use. I find the navigation system to be confusing and complicated. It often provides incorrect directions, and on occasion tells me that ‘no such address exists’ when I know different.”
“I own a 2010 Ford F-150 pickup equipped with a 4.6-liter, V-8 engine and automatic transmission, as well as a tow package. I use this pickup to pull a tandem axle trailer loaded with my Farmall Super M and Deere D tractors to tractor shows and pulls. Sometimes I also use it to pull a dump trailer loaded with up to 10,000 lbs. It has more than 149,000 miles on it with no problems at all. This is my fifth F-150 equipped with the 4.6-liter V-8 engine. I usually trade them off at about 200,000 miles. No problems with any of them.”
“My 2012 Ford F-150 pickup runs good, but electronic warnings like ‘check engine’ and ‘oil change’ often come on and go off. The dealer tried to fix the problem but couldn’t. It finally locked on ‘oil change’ and stayed there. The last time I brought the pickup in for an oil change I told the dealer I’d pay for the oil change as soon as they fixed the dash problem. A week later, I got a letter saying my pickup didn’t qualify for a free oil change. Free, my big toe.”
“I bought my 2010 Ford F-150 crewcab pickup used in 2014 with about 108,000 miles on it, and have put another 100,000 miles or so on it without any problems. It has required only routine maintenance.”
“I bought a new Ford F-150 in May of 2016. A nice truck, nice ride, good mileage, no problems. Except – the spare tire was mounted under the bed and out of sight, where it collects dirt and road salt. I decided to mount the spare in the bed and noticed it was not the same size as the tires on the truck. The spare is an inch larger in diameter – or more than 3 in. in circumference – which means this mis-matched spare tire will gain over 3 in. every revolution. This difference would definitely have to work out somewhere and it wouldn’t be good. So I bought a replacement spare that is the right size for $300. If you buy a Ford pickup, be sure to check the size of the spare before you take delivery.”
“I like my 2013 Volkswagen Passat diesel car. It consistently gets 45 to 52 mpg and has 65,000 trouble-free miles on it. But this will all end soon, because the EPA says these fine cars have to come off the road because they pollute too much.
“My 2013 Ford F-150 pickup, equipped with an Ecoboost engine, has 12,000 miles on it. It gets only 9.2 mpg pulling a small trailer. Without the trailer and using gas with a minimum corn blend, it gets about 15 mpg, and with 100 percent gas about 17 mpg. This pickup has been in the shop for repairs 6 times, and 2 of those were for 5 days at a time. I wonder which of my 2 vehicles pollutes the most?”
“I wish I had test driven my 2014 Ford F-150 pickup at night before I bought it. I traded in a GM pickup with great headlights. But the first time I drove the Ford at night it reminded me of 1950, when cars used 6-volt DC to run the headlights. The other day the headlights went out for 2 hrs. Not good, because I ran into a thunderstorm and the headlights wouldn’t come on.”
“I’ve owned several Ford F-150 pickups during the last 30 years, and all of them have been trouble-free.
“My 2012 Deere 2320 tractor has been nothing but trouble. The 3-pt. hitch locked up twice, and whenever the engine is idling it sounds like it’s going to fall apart.”
“My 2014 Ford F-150 extended cab pickup is dependable and fuel efficient. However, I don’t like the Sync GPS Navigation Radio on it.
“I like my Kawasaki Mule 2500 utility vehicle equipped with a diesel engine. It has an aluminum top and a plexiglass windshield.”
“My Cleary building was put up with shoddy building materials and poorly constructed. The materials aren’t all the same color and the building is more than 10 in. out of square. Every summer I have to walk around and pound nails down. It has taken a few years, but I’ve finally got all the leaks stopped.
“My 2012 Ford F-150 pickup equipped with an Ecoboost engine is hard on gas even without a load, but when it’s hooked up to a small trailer it gets only 12 mpg.”
“We needed a tractor with a diesel engine and a front-end loader so we bought a 2012 Kubota 3200 HST, which we really like. My neighbor likes it a lot, too, and has used it more than I have. I think he may end up buying his own.
“No problems with my 2004 Ford F-150 pickup which has about 118,000 miles. It’s the best pickup I’ve ever owned.”
“I’m not happy with the 5.4-liter engine on my 2004 Ford F-150 pickup. I’ve owned 8 different pickups since I was a teenager, but the engine on this Ford is the worst. We searched for a replacement engine and finally found one that we bought for almost $9,000. But the new engine also has a serious knock, and the company refuses to help.”

“My 1978 propane-powered Ford F-150 pickup has more than 576,000 miles on it. It’s a tough old bird that has survived several accidents.”
Read the whole story →“My 2004 Ford F-150 is the best pickup I’ve ever owned. It has more than 115,000 miles on it with no major repairs. No rust and still looks like new.”
“My 2010, 2012, and 2014 Ford F-150 pickups all run smooth and quiet. They have a comfortable ride and are very fuel efficient. Everything a farm pickup should be.”
“My husband and I find the navigation system on our 2012 Ford F-150 pickup to be useless. On our first trip with the vehicle we wanted to drive from Pittsburgh, Penn. to Plymouth, Mass. The navigation system instructed us to drive through the state of Maryland, but Maryland is south of Pittsburgh and clearly not in the northeasterly direction that we had to go. We never use the navigation system now, relying instead on our iPhones. Also, if we want to change our route with the Ford navigation system, we have to stop the vehicle.”
“My 2013 Ford F-150 pickup gets 21 to 22 mpg. I like it so much that I recently bought a second one.”
“My 2006 Toyota Tacoma pickup equipped with a manual transmission gets 22 mpg on the highway and 20 mpg in 4-WD. It has about 100,000 miles on it but has been in the shop only for oil changes and tire rotations. I drive on gravel roads that get muddy, icy and snowy. This pickup sits outside all winter long, yet always starts right up even in below zero weather. It has a high body and a wide wheelbase and is a good, hardworking hauler.
“I bought a 1997 Ford F-150 pickup but sold it 5 years later. It was in and out of the shop a lot for transmission problems. It was advertised as Ford tough but turned out to be Ford lemon. It was rated to get 12 mpg and that’s just what it got.”
“I like my 2013 Ford F-150 pickup equipped with a 3.5-liter Ecoboost engine, except for the mileage. At best this pickup gets about 10 mpg pulling a cargo trailer that weighs about 6,000 lbs. loaded. Pulling against a headwind drops it down to maybe 8 mpg. On the highway without the trailer, I can do at best about 18 mpg.
“I’m disappointed with the SYNC on this pickup as well. It’s supposed to allow you to talk on the phone, navigate and listen to music while keeping your hands on the wheel and eyes on the road. However, it’s difficult to understand and learn, and for that reason I use it very little. Many times my phone won’t connect, and answering a call is a lesson in frustration. The caller can hear me, but at times I can’t hear them. The navigation system is also difficult to use.”
“My 1986 Ford F-150 pickup is equipped with a rebuilt 302 cu. in. gas engine and is always dependable, no matter what the weather.
“My 1994 Kenworth semi truck equipped with a new Caterpillar 3406 diesel engine does all the work of new trucks that cost 5 times as much. I keep up with a good synthetic grease and oil maintenance program.”
On the negative side, he lists his 2007 Ford F-450 pickup equipped with a Power Stroke diesel engine. “The engine is always blowing a gasket and it’s impossible to reach. This is a very over-engineered vehicle. The next time I have a shop truck built for my fleet I’ll recommend a Dodge diesel.”
Kelly’s the owner of a 2005 Ford F-150 pickup equipped with a Tritan 4.6-liter, V-8 engine and automatic transmission. “It has about 155,000 miles on it and has required only routine maintenance. I use it to haul my antique tractors on a trailer and to pull a dump trailer. It’ll pull 8,000 to 12,000-lb. loads with no problems. This is a great pickup.”
“It’s by far the best work truck I’ve ever owned,” says Andy, pleased with his 2007 Chevrolet Silverado 2500HD 2-WD pickup equipped with a 6.0-liter engine and automatic transmission. “This pickup is just the right size for a small farm. The 6.0-liter engine has enough power to handle a 35-ft. gooseneck flatbed trailer loaded with eighteen 6 by 6-ft. round hay bales, or a 32-ft. gooseneck cattle trailer loaded with cows.
“I’m disappointed with my 2000 Ford F-150 pickup equipped with a Triton V-8 engine. The original engine blew up at about 88,000 miles, and the replacement one at about 110,000 miles. The third engine worked fine until I sold the pickup. Another problem was with the Coil Pack ignition coils. If they got wet, most of the time they’d go out and that started happening once or twice a week. The ignition coils cost about $55 apiece to replace, not including labor.”
Mike’s the owner of a 2012 Ford F-150 pickup. “This pickup rides smooth and is equipped with a 3.5-liter EcoBoost gas engine, which is adequate. However, it has the poorest headlights of any vehicle I’ve ever owned. I had to put reflectors up where I turn off the highway to go home at night, because I got tired of backing up on the highway after missing the turn. Also, I miss getting to see the neighborhood deer herd – the headlights are so poor that they don’t even look up when I come through.”
“My 2008 Dodge Ram 1500 Quadcab pickup, equipped with a 4.7-liter engine, started out as a best buy. However, after 4 years of dependable use it developed an intermittent starting problem. The engine would turn over but wouldn’t start. One time I had to call a tow truck, but when it got there the pickup started right up for him. I had the pickup towed to the dealer anyway. The dealer found no codes or anything but did replace a $400 power module.
“After we drove the pickup home we were able to make only a couple trips between farms before it failed to start again. The pickup sat in our yard for 3 days because it wouldn’t start. The dealer sent a service man out to our place and he checked for codes but found none. Then when he turned the ignition key, it started right up. He drove the pickup back to the shop where it started and ran perfectly for a week. They never were able to find the problem. Finally the dealer bought the pickup back and I bought a 2012 Ford F-150.”
“The following problems happened before my 1997 Ford F-150 pickup even had 80,000 miles on it: the rear end went out, it went through 6 starters, and we had problems with the brake lines and ring gear. Also, the cab lights would stay on and straps on the gas tank broke.”
“I like my 2005 Ford F-150 pickup equipped with a 4.6-liter engine and automatic transmission. I use it regularly to pull a 6,000 to 8,000-lb. dump trailer, and to haul up to 10,000 lbs. of antique tractors on a flatbed trailer. This pickup has about 140,000 miles on it but has required only routine maintenance and still runs like a top.”
“This is one tough machine,” says Leonard about his 1999 Cub Cadet 1641 riding mower equipped with a 48-in. deck. “The deck has tangled with wire fencing and rocks but has stood up to it. All I’ve replaced are a belt, blades and an electric clutch connector to the pto. Otherwise it has required only routine maintenance.
“My 2004 Ford F-150 pickup gets only about 10 mpg pulling a trailer and 12 to 13 mpg empty. The same models now being offered by Ford are advertised to get closer to 20 mpg. Why can’t the company offer some kind of a retrofit kit that would make my model more fuel efficient?”
“In 2004 I bought a used 1992 Ford F-150 equipped with a 302 cu. in. engine with about 150,000 miles on it. The check engine light came on frequently so I changed the fuel pressure switch. The oil pressure gauge never showed any pressure.
“I switched to Esso Protec 10/30 oil, and the oil gauge started to move to normal. I changed the oil again after 500 miles, and since then the pressure gauge has been running at normal.
“However, the check engine light kept coming on so in 2008 I started using only Shell regular gas, and the check engine light hasn’t come on since. Now the pickup has about 200,000 miles on it. So, my best buys are the 1992 Ford F-150, Esso oil and Shell gas.”
“I’ve put about 81,000 miles on my 2006 Ford F-150 pickup with no breakdowns. My 2011 Ford F-150 pickup has about 7,600 miles on it and it hasn’t had any problems, either. It averages 21 1/2 to 23 mpg.”
“It’s the best vehicle I’ve ever owned, bar none,” says Lloyd about his 2003 Dodge 3500 65P dually pickup. “It’s really fuel efficient and has a lot of power. No problems. It has about 52,000 miles on it. All I’ve replaced are the front tires.”
On the “worst buy” side, “My 1990 Ford F-150 pickup skipped and missed from day one. The dealer spent more time with this pickup than I did for the first three months. I tried to get him to replace it because of North Carolina’s lemon law, but he just told me to hire a lawyer. I was a Ford man for 35 years, but not any more.”
“My 2008 Ford F-150 pickup is fuel efficient. My 2008 Ford Taurus has never been back to the dealer except for filters and oil changes.”
“My 1997 Ford F-150 extended cab pickup has almost 300,000 miles but is still going strong. It’s ready for another 100,000 miles. No body rust. The rear axle seals have been replaced, as well as an intake manifold. Otherwise it has required only routine maintenance.”
“My best buy was my 1977 Ford F-150 pickup. I factory ordered it with 4-WD, standard cab, shortbed, two gas tanks, two batteries, a heavy-duty radiator and alternator, LS rear axle, 300 cu. in. straight 6-cyl. engine, and a 4-speed transmission. This pickup has a rugged simplicity that makes it superior to anything on the market today. I’ve driven it places where other trucks could never go. In the past I owned several other pre-1980 Fords, and they were all excellent.”
“It’s the best vehicle I’ve ever owned, and I’ve had a lot of them over the years,” says Bob about his 2008 Ford F-150 pickup. “It has required only routine maintenance.”
“I’m well satisfied with my 2005 Ford F-150 longbed pickup equipped with a 4.6-liter engine. It has more than 113,000 miles on it but has required only routine maintenance. It’ll carry 3,000 lbs. of beans on the highway without swaying. I traded in a 1997 Ford F-150 with about 212,000 miles, and I had never changed the spark plugs, hoses or belts. It still got about 20 mpg on the highway when I traded it.”
“My all-time best buy is my 1988 Ford F-150 pickup equipped with a 4.9-liter, in-line 6-cyl. engine and 3-speed transmission. I bought this pickup used in 1998 with about 78,000 miles on it. I paid only $2,700 for it. It came from Lubbock, Texas, and needed some work due to gross negligence. I changed the original air filter, fuel filter, and spark plug wires. I had a friend put in new crank bearings and a high output oil pump, which cost $180. I don’t believe the former owner had ever changed the oil.
“I installed a new clutch at about 125,000 miles and fuel injectors at about 155,000 miles. The only body parts I had to replace were the rear brake cables and 2 ball joints. Now the pickup has almost 200,000 miles on it but still runs great, and I haven’t found any load that it can’t handle. It’s just now starting to show a little rust. It’s a great pickup.”
Lawrence is happy with his 2002 Deere 790 4-WD tractor equipped with a front-end loader and backhoe. “This tractor is a real workhorse for its size. We use it for loader work, spreading stones and dirt, picking up firewood, and so forth. No problems.
“In 2001 I bought a new Chevy K 2500 pickup equipped with a heavy duty snowplow, and the pickup was nothing but trouble. The fan clutch had to be replaced due to overheating and it had a lot of electrical problems. Finally, when the muffler baffle broke at 14,000 miles, I had enough and got rid of it. I’m glad I kept my Ford F-150 pickup.”
“My 1999 Ford F-150 pickup is a true workhorse.
“My DR Field and Brush mower works great. I use it to clear thick, overgrown yards and old reclaimed fields.”
“My 1999 Ford F-150 pickup is still a reliable workhorse. I bought it used with about 110,000 miles on it. Now it has more than 181,000 miles on it but still runs like new and has required only routine maintenance. I’ve driven only Fords since 1962.”
“I haven’t had any problems with my 1994 Ford F-150 pickup. It has more than 202,000 miles on it, and all I’ve had to replace were a fan belt and two light bulbs.”
“My 2002 Kubota M9000 tractor handles great and has had no mechanical problems. It’s also easy on fuel.
“My 2007 Dodge 2500 pickup equipped with a Hemi V-8 engine rides rough and gets only 11 mpg. The dealer had led me to believe it would get 17 to 18 mpg because of the new technology that shuts down four cylinders when not needed, but it never did. I traded this pickup for a Ford F-150, which gets a more reasonable 16 mpg.
“My Ferris walk-behind mower never performed right and the company wouldn’t help in any way. I think Scag and Toro make the best lawn mowers.”
“Our 1992 Ford Chatou full-size van, which we bought used in 1998 with about 68,000 miles on it, is our best buy. We use it every summer on vacation to pull our pop-up camper as well as to haul a ZTR mower home from Arkansas. We also use it to transport feed and farm machinery, etc. Our biggest expense was to replace a rusted-out oil pan. After 15 years this van is still very tight, with no rattles. We just sold it to downsize to a minivan. The van had about 214,000 miles on it.
“We used our 1981 Ford F-150 pickup hard, but even so it lasted 20 years until we bought another F-150 to replace it.”
“I’m well pleased with my three Milwaukee hand tools which include a 1/2-in. Magnum drill motor, super sawzall, and 4 1/2-in. hand grinder. I’ve used them many hours with no problems.
“My 2004 Ford F-150 pickup and 2000 Mercury car are also best buys.”
“I really like my International Harvester Cub Low Boy tractor, which I bought used. It’s equipped with a cab, 5-ft. mower deck, and 5-ft. snowblower. I like the over-and-under 2-speed transmission. The cab is equipped with a heater and fan. I can mow my lawn in less than one hour and clean the snow from our driveway in comfort.
“I bought my 1990 Ford F-150 pickup used equipped with cruise control, cap, and bed liner. All I’ve ever had to do is check the oil and fill up on gas. The automatc transmission works fine. The pickup has only about 65,000 miles on it.”
“My 2005 and 2006 DeWalt 18-volt cordless power tools are best buys. We build boat docks and have tried most of the other major brands, but DeWalt tools are by far the best.
“My 2001 Ford F-150 pickup is my worst buy. The transmission had to come out in 2005 with only about 43,000 miles on it. This pickup was used for everyday use with no hard miles on it. Even though the 36,000-mile warranty had only recently expired the company wouldn’t help. It cost me $3,600 to fix which was not acceptable. Now I own a Chevy.”
“At one time I owned a 1979 Ford F-150 pickup, which was a worst buy. I tell people I actually bought two identical pickups the same day, because it was both the first and the last Ford to ever be parked in my driveway.
“My next new truck was a 1987 Dodge D-50 which we drove for 116,000 miles in four years and four months. I loved it. We now own a 1993 Nissan Sentra which I really like. We bought it used with about 64,000 miles after it had been in an accident and restored. Now it has more than 159,000 miles, and it seems like 300,000 miles might be within its range. I’ve never owned such a trouble-free car. I also have a 1996 Dodge 3/4-ton diesel pickup with about 207,000 miles. It gets 23.4 mpg on the highway and can move a mountain.”
“I’m well pleased with my 1998 Ford F-150 pickup. It has more than 130,000 miles on it but just keeps going strong.
“My Ryobi 4-cycle weedeater is my worst buy. It has been a piece of junk since the day I bought it. After only two months of light use it started leaking oil, and the company wouldn’t do anything about it. I’ve had it rebuilt twice but the same problem keeps happening.”
“It’s the best vehicle I’ve ever owned,” reports Ronald, pleased with his 1997 Ford F-150 pickup. “It has about 110,000 miles on it and has done everything a farm truck can do. No maintenance other than replacing front brake pads, spark plugs and oil.”
“My 2003 Ford F-150 crew cab pickup is my best buy. I use it to pull an 18-ft. trailer loaded with a 5,500-lb. load. We also use this pickup as our vacation vehicle. It’ll burn any type of fuel including E-10 and E-85 ethanol blended fuel. It gets about 14 mpg when pulling a trailer and 19 mpg empty.”
“I haven’t had any problems with my 2001 Ford F-150 extended cab 4-WD pickup. It rides and pulls good. It’s my best buy.
“My 1998 Chevrolet S-10 4-WD Blazer is my worst buy. It has only about 80,000 miles on it but we’ve already had to replace three CV joints and a stub on the front axle. It has also needed a new alternator, water pump, fuel pump, and two oxygen sensors. This Blazer has not been our most dependable vehicle.”
“I like my 2001 Ford F-150 pickup. I use it for heavy hauling, dragging trailers through mud, etc. No problems after 125,000 miles. It has required only routine maintenance.
“My 1998 Toyota pickup, which I bought used, is my worst buy. The original owner told me he had problems but thought they were all fixed. They were, but I got a lot of new ones from the transmission to the water pump, all before the pickup reached 100,000 miles.”
“In the last issue of FARM SHOW Bonetz Zeimetz of Mondovi, Wis., got my attention with his worst buy, a 2000 Ford F-150 pickup. I and two of my sons have similar vehicles with defective engines. My pickup has leaking head gaskets, and the engine in one of my son’s Ford Expedition blew two spark plugs.
“The problem isn’t exclusive to the engines manufactured in 1999 and 2000. It covers engines built all the way from 1997 to 2003.
“The warranty on my F-150 had just expired when I discovered the head gaskets were leaking. After talking to several Ford dealers I found that leaking head gaskets and blown spark plugs are a common problem with Ford engines. Also, Ford was well aware of the problem but kept installing the defective engines in their vehicles.
“In addition to Ford, I filed a complaint with the NHTSA, the FTC, the Center for Auto Safety, the Michigan Better Business Bureau, and the Utah Attorney General. After spending a year and a half without getting help I decided to just let the head gaskets leak. There are other trucks to buy.”
“My 1987 Ford F-150 pickup has more than 207,000 miles on it and is my best buy. It’s powered by a 6-cyl., 300 cu. in. engine which has never required any major engine work except for the replacement of an oil pump. I bought it used about ten years ago with about 100,000 miles on it. I think Ford’s 6-cyl., 300 cu. in. engine is the best gas engine Ford has ever built, especially the fuel-injected models. I wouldn’t hesitate to make a long trip to California or anywhere else with it. My neighbor has a vehicle with one of these engines and it has more than 340,000 miles on it and has never had the head off.
“My 1999 Dodge Durango SUV equipped with a 318 cu. in. engine is a best buy. Hands down it’s the best mid-size SUV on the market. It has the same running gear as a full-size Dodge 1/2-ton pickup, bigger than any other 1/2-ton or full-size SUV or pickup except another Dodge. It has the same rear axle housing as my 1977 Dodge 3/4-ton pickup and 1984 Ram Charger.”
“It’s the best pulling pickup I’ve ever owned,” says Boneta, owner of a 2004 Dodge 1500 Hemi Ram equipped with a 345 hp engine. “I use it to pull a trailer.”
On the minus side, “My 2000 Ford F-150 pickup was recalled for engine problems. Then the transmission went out. Ford had to recall 1.3 million trucks made from 1999 to 2000 because of head and gasket leaks on the engine. Some engines were so bad they had to be destroyed.”
He likes his 1999 Ford F-150 extended cab pickup equipped with a 4.6-liter, V-8 gas engine and automatic overdrive transmission. “It’s roomy enough to carry four adults and gets a respectable 22 to 25 mpg.
“I bought an International Harvester 1466 tractor from a friend for $4,500 and use it every day. I haven’t had any major problems except I had to buy a new set of Taper-Loc spindles.
“I bought a Case 2470 4-WD tractor at an estate sale for $4,500 and it’s a best buy. It lets me work the ground a little sooner and also use bigger equipment. It’s now my main tractor. It works great in mud.
“My 1986 Honda 3-wheel ATV is a best buy. I put about 600 miles a year on it. Other than gas, oil and filters, and a set of 6-ply mud tires I haven’t spent a dime on it since it was new.”
On the negative side, “The 12-speed drill press I bought from Harbor Freight is a piece of junk. You have to watch what you buy from them. From now on I’ll buy only brand names.”
Carlton says his 2001 Chevrolet 2500 heavy duty pickup equipped with an 8100 engine and a 5-speed Allison automatic transmission works great and is his “best buy”. “The engine-transmission combination on this pickup is the best I’ve ever seen. I use the pickup to haul my 21-ft. gooseneck trailer loaded with two tractors, and it has power to spare.
“My Ford F-150 pickup was one of my worst buys ever . When I left the dealer’s lot, I only got one mile down the road before the service light came on. Later, rain water poured in on the passenger side of the floor. The first winter the pickup wouldn’t start at temperatures of 20 to 25 degrees above zero. The dealer checked it out but couldn’t find any problems. When the pickup had 40,000 miles on it I traded it in for a Chevrolet with 98,000 miles, paying $500 to boot. It was the best move I ever made.”
“My 2000 Ford F-150 pickup performs well and has done everything I expected it to do. It’s also fuel efficient.”
On the negative side, “I bought a Morton garage-type building equipped with two 9 by 8-ft. overhead doors. The door openers won’t work unless I’m standing just outside, or sometimes inside, the building to help raise the doors. I bought this building from Morton as a package that included doors, door openers and a cement floor. I’ve called the company and have also stopped in several times. However, the secretary always says the salesman is out of the office.”
“My best buy of all time was my 1950 Farmall M tractor which I bought new for $2,250. I sold 35 fat hogs to pay for it. I still use it and it runs great. I don’t do heavy work with it, but it still has a place alongside our green line of tractors.
“I’m disappointed with my 1995 Ford F-150 pickup. The battery lasted less than a year, and the dealer didn’t want to replace it but finally did. The tilt steering wheel system didn’t hold up so they replaced some parts under warranty. However, after the warranty expired it went out again and this time I had to pay $385 to fix it. An oil leak developed at 35,000 miles, and a pan gasket had to be replaced at a cost of $500. Then the transmission developed a leak, which cost another $200 to repair.”
“My 1992 Ford F-150 pickup is my best buy. I’ve read in different consumer magazines that I should avoid this model, but I’m well pleased with mine. It has more than 140,000 miles on it. My only expenses were to repair a switch on the automatic transmission, and to install new brake shoes and a new U-joint.”
Michael’s the proud owner of a 1990 Ford F-150 pickup. “I bought this vehicle three years ago with 150,000 miles on it and have put on another 100,000 miles. It still runs great and doesn’t use any oil. I haven’t had to do anything to it except for normal maintenance. I change the oil every 3,000 miles.”
“I haven’t had one bit of trouble with my 1997 Ford F-150 pickup. I can hook on a trailer loaded with five tons of feed behind this pickup and it just walks off with it.”
“My Ford F-150 pickup, equipped with a 351 cu. in. engine, is a great road vehicle. I often drive it to visit my daughters in Texas. It holds the road well, has super comfortable seats, and has a cab that offers good visibility. It’s so comfortable that I hardly ever get tired on a trip. No problems after 88,000 miles.”
Alton nominates his 1994 Ford F-150 pickup as his “worst buy”. “The electronic overdrive transmission has had problems. The problems happened both under warranty and also after the warranty expired. The engine runs fine and the pickup drives good, but I’ve almost spent enough on repairs to buy a new transmission. We don’t use it hard - it rarely pulls a trailer. It has about 80,000 miles on it.”
A 1999Ford F-150 extended cab 4-WD pickup rates as Michael’s “best buy”. “I really like the 4-door cab. It has good seats and offers the driver a good view. I also like the 4-WD electronic control. It sure beats the old lockout hubs.
“I have mixed feelings about my 1999 Simplicity Legacy 20 hp garden tractor. It works great for mowing or blowing snow. However, the hydraulic system works too slow and brackets on the rocker shaft keep working loose from the frame. The tractor’s foot-controlled hydraulics are a joke when used with the mower. Also, you can’t use the differential lock and activate the hydraulics at the same time. I installed a hand-controlled lever to operate the hydraulics, which helps a lot.”
“I like my 1998 Ford F-150 extended cab pickup which is equipped with a 6-cylinder engine and 4-speed transmission with overdrive. It runs great and averages 18 to 19 mpg. I use it to pull my livestock trailer and to haul stuff around my ranch.”
Carlton’s impressed with his 1998 Ford F-150 pickup equipped with a 4.2-liter 6-cyl. engine. “It has as much power as a lot of V-8 engine-powered pickups on the market. It gets unbelievable gas mileage and runs quieter than any other pickup I’ve seen.
“My Deere rotary mower is a best buy. The cutter has a heavy duty gearbox and cuts anything the tractor can get through. It has a very strong frame.
“My worst buy is my Murray riding mower. One problem is that the belt on the deck slips all the time. It has gone through about three belts a year, and in thick grass it just stops cutting. The mower’s Briggs & Stratton engine had a bad flywheel and was underpowered. The next mower I buy will be a Deere.”
William likes his 1996 Ford F-150 pickup equipped with an in-line 6-cyl. engine, automatic transmission, and 3:55 rear end. “It’s very reliable and comfortable and rides nice. It gets a little over 20 mpg during the summer which I think is reasonable. I use it to haul water to our house, mounting a 250-gal. tank in the bed. The springs, tires and frame on this pickup are all more than adequate for the job.”
Chris is impressed with his 1997 Ford F-150 extended cab pickup equipped with a V-6 engine and automatic transmission. “It rides like a car but works like a truck. It can haul 2,200 lbs. of fertilizer or a 24-ft. travel trailer with no problems. I did have to install overload springs on it.
“My 1993 Deere 2755 tractor has been trouble-free. I use it to pull a mower, baler, forage harvester, and rotovator. I really like the air-conditioned cab.
“My 1996 Massey Ferguson 253 4-WD tractor has 48 pto horsepower and works good for what I use it for. It does have its faults. For example, the levers for the remote hydraulics, pto, 4-WD, and hand brake are all clustered too close together. The driver always has to look down to make sure that he’s grabbing the right lever.”
On the “worst buy” side, he lists his 1994 GM 1/2-ton pickup equipped with a V-6 engine. “Parts fell off, the body rattled, and it had a terrible seat. If I drove it any more than two hours at a time, when I got out of the cab I would walk like I was 90 years old. I finally traded it in two years ago for a new Ford F-150 pickup. It works great. There’s no comparison between the two.”
Garlon’s annoyed by a problem with his 1989 Ford F-150 pickup equipped with a 300 cu. in., 6-cyl. engine and 5-speed transmission. “It doesn’t cruise smooth at low load and low speed, but runs fine under load. I’ve driven other pickups with standard transmissions that do the same thing, whether they’re V-8’s or 6’s. It drives me nuts.”
“It’s a great performer,” says Johnie about his Sears Craftsman riding mower equipped with an 18 1/2 hp twin cylinder Kohler Magnum gas engine. “It makes a 46-in. wide cut. I also like my Sears air compressor.
“My 1997 Ford F-150 pickup equipped with a 4.6-liter V-8 engine and automatic transmission is a best buy.”
“My 1997 Ford F-150 pickup is my best buy. It rides comfortably, shifts smooth, and at 17 to 18 mpg is fuel efficient. The 4.6-liter engine has plenty of power to pull my flatbed trailer.
“My 1997 Mercury Sable car is the hardest riding car I’ve ever owned. I think my F-150 pickup rides better. The car also makes too much wind noise.”
One of Wayne’s “best buys” is a 1997 Ford F-150 pickup equipped with 5.4-liter engine, 4-speed automatic transmission and limited slip 3:55 rear end. “It has the horsepower to run at interstate speeds and still provide great gas mileage. When you step on the gas, it really rocks. Few cars I’ve owned have the kind of pickup this truck does. It’s a real pleasure to ride and drive.”
On the negative side, he’s unhappy with his 1992 Bush Hog 2512 shredder. “I hadn’t run it more than 20 hours when the center gear box gave out. After a year’s worth of phone calls and talks with the company, they agreed to replace it if I paid the freight. The mower. “The Honda is the best little workhorse on the place. It’ll pull a flatbed trailer with about 30 bales on it. The Deines mower is easy to operate and turns on a dime. It’s also easy to maintain and clean because the deck tips up in front. It cuts our mowing time by two-thirds and it cost two-thirds less than comparable models and makes.”
Clifford’s “worst buy” was a Troy 352 Garden Way Speedy Hoe. “If you run the gas tank dry, you’ll have problems. It loses power and will not run until you take the carburetor off and clean it.”
He’s had a lot of problems with the 1995 Ford F-150 pickup, equipped with 6-cyl. engine and standard transmission, which he bought used last June. “The clutch went out in July and again in November. This time, there was extensive damage to the transmission which required a lot of repairs and downtime. About three weeks later the transmission and clutch went bad again. All this with normal driving, not pulling a trailer or any extra weight.”
“My worst buy is my 1998 Ford F-150 pickup. It’s a gas guzzler and is underpowered when pulling a load. I wouldn’t recommend Ford to anyone who needs a work truck.”
“Larry’s the owner of a 1997 Ford F-150 pickup. “No problems after 46,000 miles. This is the first Ford I’ve owned in 22 years, but I wouldn’t hesitate to buy another one. It’s definitely a best buy.”
On the “worst buy” side, “My Deere 714 mulch tiller pulls too hard. I think it would make a better ship anchor.”
“My Ford F-150 pickup equipped with a V-8 engine is my worst buy. They should have called it the Hong Kong special. I’ve owned Fords all my life, but this is the last one.”
Willard’s disappointed with his 1994 Ford F-150 pickup. “I had problems with the computer sensor which caused the engine to idle too fast. Also, the rear end is geared too high. Get rid of the computers and sensors and it would be a good truck. I finally ended up selling it. However, my old 1978 Ford F-250 4-WD pickup is still going strong at 165,000 miles. “I like Wheelhorse lawn equipment.”
“My best buy is my 1987 Ford F-150 pickup equipped with a 300 cu. in. 6-cyl. engine and 4-speed transmission. It has 223,000 miles with no major problems. I replaced the water pump, alternator, starter, and a universal joint. I always use Cenex 518 multi-grade oil and change it every 4,000 miles.”
“We’ve used our Welger RP-200 round baler for five years with no major problems. The twine tieing mechanism could be improved, but overall it’s not a bad baler.
“My 1987 Ford F-150 pickup is my worst buy. The 6-cyl. engine is hard on gas. By the time the pickup was only two years old it had gone through four starters, an alternator, and a heater core. I was very fortunate to be able to sell it.”
Frank’s had problems with his 1992 Ford F-150 pickup. “The door handles and electronic door locks on it are a joke. The problem is that a part on the handle wears out, allowing the handle to break away from the door. In order to replace the part I have to replace the entire door latch mechanism. The electronic door locks quit working a long time ago. The dealer says new parts would cost $116. The clutch pedal is another problem. Due to wear I can’t push the pedal down far enough in order to start the pickup. I had to replace the clutch before the pickup had 50,000 miles on it. I replaced the muffler and exhaust pipe even earlier.”
“I’ve had good luck with my 1993 Deere LX178 riding mower equipped with a water-cooled engine. It has done a lot of cutting and has gone through two decks. The tractor itself is like new. It’s my best buy. “My 1990 Ford F-150 pickup is my worst buy. It’s had electrical problems and now the paint is peeling off. The dealer wouldn’t help and the company won’t help pay for the cost of repainting it. I think my next pickup just might be a Dodge.”
James is impressed with his 1994 Belarus 572 front wheel assist tractor. “It has a lot of power and has been almost maintenance-free. I really like the front wheel assist. I recently traded it in for a bigger 825 model which I also like.” On the negative side, he lists his 1995 Ford F-150 extended cab 4-WD pickup. “I had to have the front wheel hubs and transfer case worked on before it even had 7,000 miles. The front end made noises and the dash rattled. It did ride good, though. I traded it in for a 1996 Dodge extended cab pickup which I like.”
“One of my best buys ever is my 1994 Ford F-150 extended cab pickup equipped with a 6-cyl. engine. It has twin fuel tanks so I can drive 350 miles without having to refill. No problems and, after 20,000 miles, it looks like new. I often use it to pull a trailer and it has power to spare.”
“My 1984 Ford F-150 pickup equipped with a 6-cyl. engine is my best buy. It came equipped with a Motorcraft battery that lasted 10 years and two months. By that time the pickup had 70,000 miles on it. In 65 years of driving I’ve never had a battery last that long.”
“It performs well and has a lot of lifting power,” says Walter about his 1982 Massey-Ferguson 1155 tractor. “My 1990 Ford F-150 pickup is my worst buy. The engine went bad, the gear shift lever wouldn’t move, and the two-tone paint came off.”
“I bought a heavy duty pickup bumper equipped with twin hydraulic bale spears made by Bramco of Fairview, Okla., and distributed, installed, and serviced by Jespersen Mfg. & Sales, Inc., Neosho, Mo. It’s my best buy. The spears can be easily removed with pins to eliminate bed clutter. I can use it to haul and feed round bales from the comfort of my pickup cab. An additional inexpensive unroller attachment allows me to unroll the bale. I’ve used it for five years with no problems. All I do is grease it. Custom painted or chrome bumpers are available.
“My 1986 Ford F-250 pickup equipped with a 6.9-liter diesel engine is my worst buy. Not one gauge still works on it and some gauges haven’t worked for five years. The oil pressure gauge, both fuel gauges, tachometer, glow plug controller, ignition switch, emergency brake, 6-volt lights, and water fuel separator all don’t work. Parts for it are expensive.
“My 1981 Ford F-150 equipped with a 300 cu. in. 6-cyl. engine is a better pickup by far.”
“My 1990 Ford F-150 pickup is okay but has uncomfortable seats that lean back too far. Also, the 351 cu. in. engine tends to heat up, and the paint quality is poor. The company should take a long look at the old 1966 International D-1000 pickup. It didn’t cost much and was as tough as nails.”
Tim Ward, Missouri Valley, lowa: “My 1979 Ford F-150 4-WD pickup, which I bought used in 1985, still runs like new. I've used it to haul 4,000 Ibs. while at the same time towing a 12,000-Ib, trailer load. No problems, It’s really made me a believer in Ford.”
Rick Wallace, Shelburne, Ontario: “My Posi Lock gear puller is an excellent product. It's well made and is a must for any farm or business. “Pederson vise grips are a time-tested, superior tool. They work better than any copy cat model and deserve an award. (Peterson Mfg., 108 S, Pear, DeWitt, Neb. 68341 ph 402 683-2325). “On the worst buy side nominate my 199] Ford F-150 pickup. The paint is falling off it and the dealer won't help. I've written directly to the company with no results. [even sent them a copy of the story FARM SHOW published regarding paint peeling off Ford pickups. I'll never buy another Ford again.”
Glenn Davis, LaSalle, Ill; “My 1990 Ford F-150 is comfortable to drive, doesn't use oil after 60,000 miles, and is fuel efficient.”
William Thew, DeBolt, Alberta; William nominates a 1992 Ford F-150 1/2-ton pickup with 300 cu, in, engine and 5-speed transmission with overdrive as his best pickup. “I like the fuel economy and handling, the low purchase price, and dealership and company relations with their customers.”
Norvin L. Carter, Gallipolis, Ohio: “A 1992 Dodge 250 2-WD pickup equipped with a Cummins turbo diesel engine is my best buy. It rides and handles well, and has a lot of power. It’s twice as fuel efficient my 1976 Ford F150.”
William T. Jones, Dumas, Texas: One of William's “best buys” is his 1991 Ford F-150 pickup equipped with a 302 liter engine, 4-WD, and Super Cab. The pickup has 86,000 trouble-free miles on it. “As soon as the new model comes out, I'll trade for another one.”
David Barhan, Askoy, Minn.: “The tire carrier on my Ford F-150 is a joke here in Minnesota. All the salt they put on our roads in the winter rusted the bolts tight in a couple of years. I cut the old ones off and bought new ones, They cost $10 apiece. Ford engineers should know the bolts should have been stainless steel.” Poly Wire electric fence wire heads David's best huy list. “I practice rotational grazing and the stuff works great for temporary fences. It’s plastic twine with fine copper wire braided into it. [trolls out easy and there are no kinks, twists, or snarls. It’s lightweight so need less posts, too. Easy to reel up.”
Glen Massey, Berlin, Md.: “I use it to mow several hundred acres each year, and it just Keeps on going with no problems,” says Glen, owner of a 1991 Vicon disc mower-conditioner. “Jobs that used to be a worry and aggravation with a sickle bar mower are now a piece of cake. hope never have to use a sicklebar mower again.” On the “worst buy” side, Glen lists his 199] Ford F-150 pickup, “Mechanically this pickup works great, but the paint job has been a disappointment. The company paid for one repaint job but the paint soon deteriorated, Now it looks as bad as the original paint.”
Don Ward, Chula, Mo.: Don bought a used Deere 7000 no-till planter and says it’s his “best buy”. “Works great and distributes seed corn evenly. “My 1994 Ford F-150 SuperCab pickup has an excellent cab and rides comfortably. I'm impressed with how the back seat folds down to carry luggage, etc. The 351 cu. in. engine is fuel efficient.”
Raymond Burke, Stromsburg, Neb.: “I'm happy with my 1992 Ford F-150 extended cab pickup equipped with a 302 cu. in, fuel injected engine and an automatic transmission with overdrive. It’s easy on fuel and drives comfortably. It has 76,000 miles with no problems.”
Henry N. Gammon, Providence, N.C.: “My 1992 Dodge Dakota club cab pickup rides as smooth as a car. The 5.2-liter engine has all the power I need and easily pulls a heavy trailer. I traded in my 1988 Chevrolet pickup, which was a real lemon. It had to have new valves, seals, heads, and intake but still blew smoke. It had only 38,000 miles on it.” Wilson Glenn Collins, Maysville, Kent.: “It starts and runs good and is always dependable,” says Wilson, owner of a 1993 Ford F-150 XL pickup equipped with a 4.9liter 6-cyl, engine and 5-speed manual transmission. “It started right up last winter at 30 degrees below zero. We've pulled 10,000-1b. loads with it. Ford makes tough trucks.”
James Spillman, Smith Grove, Kent.: “T like my 1990 Ford F-150 Lariat pickup equipped with a 302 cu. in. engine and automatic overdrive transmission. It has 51,000 miles with no problems. Drives and rides good and gets 18 1/2 mpg on the highway. It'snever been back to the dealer.”
David Fricker, DeValls Bluff, Ark.: “My best buy Deere 2355 is a versatile tractor. I use it to pull a 6-row planter and cultivator, as well as a 16-ft. International grain drill, harrow and roller in fifth gear. It’s fuel efficient. If] had the money I'd buy another one. “My 1989 Ford F-150 pickup equipped with a 302 cu. in, V-8 engine and automatic transmission is a best buy. It’s a good working truck. I use it to tow a double axle trailer with 8,400 Ibs. of seed. It gets 22 mpg. 46+ FARM SHOW \ 14 Vorst Buys vious page) However, I recommend removing the original muffler and installing a free-flow muffler and an air-flow tailgate. It has 47,000 miles with no problems. However, I wish I could tighten the front wheel bearings without having to use shims.”
Bob Falk, Effingham, Kan.: "My 1981 Ford F-150 6-cyl. pickup is an all-time “best buy”. “It's got245,000 miles onitand we've never had the engine valve cover off or done anything to the transmission, Virtually no trouble at all. “Another best buy is our 1969 International 856 tractor that has over 11,000 hrs. We've never touched the engine. In fact, it still has the original fuel injectors. We use a fuel additive in both diesel and gas that eliminates moisture in fuel and provides extra lubrication. It's called Bison made by American Lubricants (1227 Deeds Ave., Dayton, Ohio 45404 ph 513 222-2851).”
Ron Bloomquist, Mooresburg, Tenn.: Bob Falk, Effingham, Kan.: "My 1981 Ford F-150 6-cyl. pickup is an all-time “best buy”. “It's got245,000 miles onitand we've never had the engine valve cover off or done anything to the transmission, Virtually no trouble at all. “Another best buy is our 1969 International 856 tractor that has over 11,000 hrs. We've never touched the engine. In fact, it still has the original fuel injectors. We use a fuel additive in both diesel and gas that eliminates moisture in fuel and provides extra lubrication. It's called Bison made by American Lubricants (1227 Deeds Ave., Dayton, Ohio 45404 ph 513 222-2851).”
Robert Byrd, Kershaw, S.C.: “My 1988 Ford F-150 pickup is my worst buy. I had six people riding in the back (I was hauling them out to the field) with two sitting on each side of the box and two on the tail gate. Itcaused the'sides of the box to spread apart about 2 1/2 in. and the bed’s floor buckled up 2 in. in the middle. When I got out of the field the tail gate wouldn’t close. A company representative checked out the problem and said that we weren't supposed to sit on the sides of the box. I told him they should tell us that when we buy it. They won’t fix it. I had the white Ford letters on the tailgate painted out. When people ask me why the Ford name isn’t on my tailgate, I tell them what happened.”
James Smith, Hamlin, N.Y.: James likes his 1990 Makita 10 mm drill. “I’ve used it for over a year with no problems. In the past I’ve used Black & Decker, Craftsman, and Skil drills, but none of them lasted more than six months.” On the “worst buy” side, he’s unhappy with his 1989 Ford F-150 pickup. “I had problems with the engine, transmission, power steering, springs, and brakes. The pickup was in the shop 25% of the time. Finally I returned it to the manufacturer under New York's lemon law.”
Charlie Harant, Caldwell, Kan.:; A 1991 Ford F-150 pickup rates as Charlie's “best buy”. “It rides easy and quiet and is an allaround better vehicle than the 1989 Chevrolet 1500 that I had owned. I sold the Chevrolet after two years. The wind noise was terrible at SO mph. The Ford has a much quieter cab. The only problem is that when the engine is cold it stalls when I accelerate. My dealer hasn’t solved the problem.”
Carrol Martin, Albany, Texas: Carrol nominates his 1990 Ford F-150 pickup as a “best buy”. “I use it for all the usual ranching jobs, from pulling hay and stock trailers to making long trips gathering parts and supplies. It’s very dependable and a comfort to drive. “My 1981 and 1986 Ford X16 riding lawn tractors equipped with 42-in, mowers are worst buys. I bought them mainly because our big Ford tractors had given us such good service. However, couldn't keep cither one going. The motors used nearly as much oil as gas. The rear end went out on the 1981 model and the front end went out on the 1986 model. I finally gave up and traded them in,”
Bob Jessup, Winter Park, Fla.: Bob says Pennzoil 10-40 motor oil is a “best buy”. “The day bought my 1985 Ford F150 pickup I dumped the oil out of the engine and putin Pennzoil 10-40. I changed the oil and filter every 3,000 miles after that. It was never in the shop and when I sold it, it had 140,000 miles.” Heisn'tpleased with Ford batteries. “I’ve always been well satisfied with the Ford pickups I’ve owned, but why do they have such poor batteries? The batteries in my newesttwo pickups lasted 13 and 14 months. Even with a warranty adjustment it would have cost $40 to replace them with new Ford batteries. bought Walmart batteries that had a 60-month warranty for $38.”
Jerry Ross, Washington, Mich.: Jerry’s had bad luck with his 1988 Ford F-150 pickup. “Both exhaust manifolds cracked and cost $100 to repair. Other repairs were required on two pistons, one rod bearing, a valve that had to be ground, and two exhaust valves that cost $160. Luckily it was still under warranty at 31,000 miles. The pickup is equipped with a manual 5-speed transmission with overdrive. First and reverse gears are geared way too high, The company admits there's a problem, but even its newer model pickups are built the same way. If it wasn't for the low transfer gear the clutch would have failed long ago. It stalls easily in high range when I’m taking off. It also gets poor mileage.”
Dennis Rahn, Deerfield, Wis.: Dennis is the satisfied owner of a 1984 Ford F-150 pickup equipped with a 300 cu. in. 6-cylinder engine. “It has 216,000 miles and has required very litthe maintenance. Doesn't burn oil, I've replaced only one alternator and one starter.”
Thomas Reilley, Auburn, N.Y.: Thomas’s “best buy” is a 1986 Ford F-150 pickup equipped with a 6-cylinder engine and overdrive, lems. “The rollers are too close to the table which lets loose hay catch in the belts and get pulled underneath.”
Charles Romansky, Orwell, Ohio: “My 1989 Makita 3 by 24 belt sander has been trouble-free. “My worst buy is a 1989 Ford F-150 pickup equipped with a 300 cu. in. 6-cylinder engine. When I start the truck it revs up to 1,800 to 2,000 rpms. Mechanics know there’s a problem, but the company won't fix it, I've taken it to five different dealers, Otherwise it’s an excellent pickup. The 4speed creeper with 3.08 rear end does a good job of pulling trailers.”
Charlie Harant, Caldwell, Kan.: Charlie's “worst buy” is his 1988 Ford F150 pickup. “The air conditioner smelled so bad that the pickup wasn’t fit to ride in. The dealer tied repairing it at least six times under warranty, but couldn’t. traded it in for a Chevrolet.”
Todd Bode, Courtland, Minn.: “We paid $5,000 for the mower and have already spent about $700 on parts,” says Todd, unhappy owner of a 1987 Schweiss “zero turn” lawn mower. “This is a dangerous machine. The joystick broke and locked, causing the mower to go into a spin while I was on a hillside, throwing me off and into a telephone pole. I had to replace all of the tires the first year because they were poor quality. I also replaced the solenoid twice, as well as the electric lift switch, the blade on-off switch, the electric clutch for the blades, and the shaft from the motor and bearing that runs the blades. All of the electric parts are Japanese-made, Schweiss Mfg. is supposed to have a one-year warranty , but after lots of arguing and fighting on the phone got one new solenoid out of them, advise anyone buying a new mower to go with a name brand company such as Deere or Toro so the factory will stand behind it. “Another worst buy is my 1989 Ford F150 pickup. The 4-speed transmission went out at 900 miles and again at 1,800 miles. Other than that it’s a nice riding, comfortable pickup.”
Lyle Nickason, Olsask, Sask.: “It’s the only disk I know of that works on rocky fields without breaking down,” says Lyle, pleased with his Summers 28-ft. Diamond disk equipped with 3-pt. mounted harrows. “It's expensive but worth three of any other disk models that I’ve ever used.” Lyle’s had problems with his 1987 Ford F-150 pickup. “It uses too much oil. Ford has tried to fix the problem twice to no avail. It was supposed to be equipped with an automatic overdrive transmission, which the dash indicator shows it to be, but it’s really equipped with a 3-speed automatic. The dealer and Ford refuse to replace it, Ford's warranty isa joke, and it gets only 10 to 13 mpg. I’m sorry I ever saw this pickup.”
Lee Grant, Middleport, N.Y.: “I haven't hooked it up yet to anything it can’t pull,” says Lee about his 1987 Ford F-150 4 by 4 pickup equipped with a 6-cylinder 300 cu. in. engine and a4-speed transmission. “I've used it to pull hay and gravity box wagons weighing up to 10 tons.”
Alan McRae, Goodyear, Arizona: “Tt offers unequalled pulling power, great fucl efficiency, and a comfortable cab,” says Alan, happy owner ofa 1989 Case-IH 7120 Magnum front-wheel drive tractor. “With the 5,000 hour warranty this tractor can't be beat.” Alan’s “worst buy” is his 1985 Ford F150 pickup. “It’s a total piece of junk. I’ve never seen a piece of machinery with so many broken parts. I'll never try a Ford pickup again unless they dramatically change it.”
James Bost, Pine Bluff, Ark.: James says his “best buy” is his 1985 Ford F150 XL pickup. “Absolutely no problems in 120,000 miles of farm use.” “My worst buy is my 1988 Chevrolet 4 by 4 pickup. “It has only 32,000 miles but already it needs a new transmission. The front wheel drive went out twice, a heater leak has never been fixed, and one of the seat belts doesn’t work.”
Joe Polizick, Lawrenceburg, Ky.: Joe has had trouble with his 1988 Ford F-150 pickup equipped with a fuel-injected 305 engine and a 4-speed manual transmission. “It uses too much oil, the throttle often sticks, the dash gauges don’t work right, the fuel pump makes a loud noise whenever the fuel level is low, the gas mileage is less than advertised, and the front tires were out of alignment when it was delivered. Also, dealer service has been extremely poor.”
Glen Mitchell, Moss Bank, Sask.: “Glen’s “worst buy” is his 1988 Makita rechargeable drill. “It took two months and three new chargers before we got a drill to work,” On the positive side, Glen is pleased with his 1988 Ford F-150 XLT pickup equipped with a standard 4-speed transmission and automatic overdrive. “The V-6 engine has twice as much power as V-8 engines, and the seat is the most comfortable one on the market.”
Lewis Tuitseh, Denton, Texas: Lewis says his “worst buy” is his 1987 Ford F150 XL 4-WD pickup equipped with a 302 V-8 fuel-injected engine and a 4-speed transmission, “The engine had no pulling power. About the time I'd get rolling, it would die. The dealer tried to correct the problem eight times but couldn’t. The windows leaked air and water, and the truck got only 8 mpg.”
Wesley Love, Arthur, Iowa: Wesley says his “best buy” is his 1987 MFS 30-ft. dia,, 7-ring drying bin. “It’s equipped with channel-lock floor, DMC grain spreader, 8 in. unloading auger, MFS sweep and 10 hp “The centrifugal fan is much more quiet than those screaming axial flow fans.” centrifical fan. This was our firstexperience drying our own corn and we were pleased. The natural air drying system dried, stored and delivered all grain in perfect condition. We didn’t use a grain cleaner, filling bins directly from our combine. The centrifugal fan is so much more quiet than those screaming axial flow fans. Also, MFS supplies an excellent outside-the-bin ladder designed with non-slip rungs. It’s wider and sturdier than inside-the-bin ladders.” Wesley also likes his 1988 Ford F-150 XLT Lariat 1/2-ton pickup. “It’s fully equipped with a small V-8 engine, 4-speed automatic transmission, air conditioning and all the other extras. It has the best ride of any pickup we’ve tried and gets aboutl8 mpg. li’s anall-around pleasure. We just wish we had bought one sooner.”
Delmar Mumma, Alamota, Kan.: “Dealer service has been great. But how do you fix sométhing that wasn’t any good to begin with?” asks Delmar, unhappy with his 1988 Ford F-150 XLT 1/2-ton pickup. “It gets only 10 to 13 mpg and its doors are fastened on with plastic. Ifthere’sany weight in the bed, the rear bumper hangs so low I can't pull anything without dragging it.” On the positive side, Delmar’s pleased with his 1987 Deere 4450 tractor. “It has plenty of power, a good range of gears for field work, easy-coupling hydraulics, aclearview cab, and it starts good.”
David Hall, Brooklyn, Iowa: David has had good luck with his 1986 Ford F-150 4WD pickup equipped with a fuel-injected 302 engine. “This is the best riding, best driving pickup I've ever owned. It has plenty of power and gets good gas mileage.”
Roger Neuman, Baraboo, Wis.: “It has plenty of power and a smoother ride than any other pickup on the market,” says Roger, pleased with his 1987 Ford F150 4 by 4 with a 302 cu. in. fuel-injected engine. “This pickup has been trouble-free over 25,000 rough and hilly miles. On most days we treat it like a tractor. “Another best buy is our 1980 Ford 7700 tractor. It offers good power, fuel economy and reliability. [thas more than 3,500 hours and all we’ ve done is change oil and put in fuel.”
Alois Claseman, Long Prairie, Minn.: A 1987 Ford F150 XLT pickup is his “best buy”. “It rides comfortably, is trouble-free and gets good gas mileage.”
William Oykes, Granton, Ontario: William nominates his Ford F150 4-WD XLT Lariat pickup as his “best buy”, “It carries a load well, rides good and has comfortable seats. I'm impressed with the fuel injected 302 V-8 - decent economy with tremendous power at all speeds.” “I'm impressed with the fuel injected 302 V-8. Decent economy with tremendous power at all speeds.”
Myles Elsberry, Wausa, Neb.: “It's got a 351-fuel injected engine that really gets out and goes,” says Myles about his 1988 Ford F150 4-WD XLT Lariat pickup. “I’ve had 390, 400 and 351 engines before, but this one beats them all. Yet this pickup drives like a car. With the trailer towing package I can pull a load anywhere, although it does ride a little rough. Now if it will just last.”
John Tomson, Mercer, Penn.: “The bed of this pickup looked like a rollercoaster after I hauled the first cow in it,” says John, who's generally satisfied with his 4WD Ford F150 pickup with a 6-cylinder 300 engine, but offers some suggestions for improvement. “For hauling anything heavier than carpet, the bed floor and tailgate are built far too light and the pollution control system has caused continuous problems. It makes the engine balk and jerk to the point it can’t be used. By replacing some emissions parts, you can make it run okay. Also, the clutch dragged from day one and the dealer couldn't fix it. I had a Ford manual linkage installed at my expense (over $100) but it didn’t help.”
Lester Rodgers, Ozark, Ill.: Lester’s “worst buy” is a 1983 Ford F-150 pickup. “First it wouldn’t start properly. Then the carburetor needed a new needle valve and seat. Next we had problems with the rear axle, as well as with a dimmer switch, wiper blade and back-up light bulb, Also, I don’t like the casterand camber settings up front.”
Leonard Navrat, Marion, Kan.: “My ‘worst buy’ is a 1988 Ford F-150 4-WD pickup. It slips out of automatic gear when I’m driving, and speeds up spontaneously when on cruise control. The motor is noisy, but four dealers tell me there’s no problem.”
Kevin Ryersee, Pelee Island, Ontario: “It gets great mileage and its 6-cylinder engine delivers more power than I ever expected,” says Kevin, owner of a 1986 Ford F-150 pickup. “It also feels more sturdy than other pickups I've driven.” On the negative side, “My Skil cordless screwdriver lacks the power to turn screws into anything but styrofoam.”
Michael French, Dixon, Mo: He's happy with his 1988 Ford F-150 pickup. “The 6cyl. fuel-injected engine and 5-speed overdrive has plenty of take-off power and gets good gas mileage, too. It’s a good allaround truck although we do our heavy trailer towing with our 1983 Ford F-350 with a 6.9 diesel.” On the minus side, Michael’s unhappy with his Homelite Super EZ chainsaw with sprocket tip bar. “I purchased the saw for fencing chores and right-of-way maintenance. In small brush you spend more time putting the chain back on than you do sawing, regardless of how much you tighten it. The fuel tank should be larger - after putting the chain on a couple times, you're out of gas.” “Milwaukee power tools are also best buys as far as I’m concermed. I have a portable grinder, model U179, that’s been worked hard for 42 years. I have a new Milwaukee circular saw, a drywall screw shooter, anda 12-volt drill for tapping sugar maples. All are top-flight tools.”
Richard Atkins, Valier, Mont.: “In 197,000 miles with my 1975 Ford F-150 pickup, I’ve had no major problems and I get 14 to 16 mpg with the 300 cu. in. engine. Uses one quart of oil every 1,200 miles “Tn 197,000 miles I've had no major problems.” although! had to grind the valvesat 105,000 miles. I have had excessive front tire wear due to the twin I-beam front end. The seat upholstery wore out in 60,000 miles and the tailgate is way too light. It won't take any weight at all.”
Henry Applebury, Chillicothe, Mo.: “My worst buy is a Hico brush cutter equipped with a 75 hp. gearbox made by Howse Implement Co., Inc., Laurel, Miss. In less than 25 acres of cutting, the platform the gearbox sits on fell apart. The company said they couldn’t help because no one had ever had the problem before. The dealer finally agreed on his own to furnish me another platform and it was twice as heavy as the original one, I lost 2 1/2 months of cutting time but it’s now a fair piece of equipment.” On the “best buy” side, Henry's pleased with his 1986 Partner 500 chain saw. “It’s easy lo start and well-balanced. I’ve owned and used several name brand chain saws in the past and this has been the most economi “My best buy is a 1982 Ford F150 4-WD pickup with a 300 in-line 6-cyl. engine. Even though it’s five years old and has more than 90,000 miles on the odometer, it still runs like a top. Hasn’t had any major problems and doesn’t have a bit of rust on the outer body. You can bet our next truck will be a Ford, too.”
Ronald “My best buy is a 1982 Ford F150 4-WD pickup with a 300 in-line 6-cyl. engine. Even though it’s five years old and has more than 90,000 miles on the odometer, it still runs like a top. Hasn’t had any major problems and doesn’t have a bit of rust on the outer body. You can bet our next truck will be a Ford, too.”
David J. Hefty, Mt. Horeb, Wis.: “Our 1987 Ford F-150 has the new in-line fuel injection, 6-cyl. 300 cu. in, engine. It has lots of horsepower and gets 22 mpg on the highway. Italready has 13,000 trouble-free miles,” says David about his “best buy”. On the minus side, he’s disappointed with his Massey Ferguson Super 90 tractor. “It’s been in the shop every spring for the past four years. The hydraulic clutch slips.”
Randy Pierson, Wardlow, Alb.: “My 1984 KM 225 Steiger tractor is trouble-free. The L-10 Cummins engine starts well, is good on fuel and pulls well. I pull a 46 ft. cultivator at 6 mph and burn 56 gal. of fuel per hr. “Another best buy is a 1986 Honda XR 250R ATV. Luse it for irrigating, checking and moving cows, checking crops and for recreation, Has a good suspension for our rough prairie and lots of power. I’ve put 1,500 miles on it without any troubles. “Lalso like my 1986 Ford F-150 Supercab with a 302 engine, Gets 22 mpg on the highway and plenty of power. I pulled an 18-ft. holiday trailer with it and got 12.1 to 13.4 mpg driving through the mountains, Truck starts well in cold weather and now has 25,000 miles on without needing any repairs.”
Robert E. Riedesel, Wauconda, II1.: “It's a gutless wonder. Barely pulls a 1¥2-ton trailer around town. It bucks, stumbles and runs rough. You can't adjust or tune it yourself because everything is computer-controlled. Truck is geared strictly for economy which is good if you don’t try to haul or pull anything. I'd never buy another one,” says Robert, upset with his 1985 Ford F150 6-cyl., 3-speed with overdrive.
Robert Patterson, Danville, Penn.: “On April 30, 1985 purchased a new International 684 row crop tractor. It spent 53 out of 99 days in the shop in less than 100 hrs. of work. I was without this tractor throughout the entire harvest season and had to depend on only one tractor to prepare and harvest 125 acres of crops.” He’s had better luck with his 1979 Ford F150 pickup. ‘I’m satisfied with it. That's why I'm still driving it. Has had few problems."
Charles Hoenke, Grafton, N..Dak.: He likes his Ford F150 pickup. “I purchased it in mid-1983 for use as a field service vehicle. It's equipped with a fuel tank, air compressor, gas welder and complete set of tools. I've put on 61,000 miles with no trouble. “Another best buy is my 1460 International combine. We've combined small grains, sunflowers, soybeans and corn with it for 3100 hrs. with hardly any downtime. Good dealer service.”
S.W. Osborne, Grandview, Tex.: “My 1984 Ford F150 pickup is a best buy. No returns to the dealership for any repairs and no factory-related failures of any kind." He nominates his Norelco microwave oven as “worst buy”. “The unit failed in one week. Even though the warranty said ‘free in-home repair or replacement’ for 12 months, we couldn't find any repair service which would come to our rural home.”
Leo Hawk, Ewing, Neb.: “Dealer service has been good and it handles well on the road. The only problem in 9,000 miles has been a sticky choke,” says Leo, happy with his 1984 Ford F-150 4-WD pickup.
Kenneth Kucera, Clarkson, Neb.: Minn.: He owns a Ford F150 4-WD. "'I use the pickup to pull loads of corn. We go 12 miles one-way to the field, pulling 300 bu. loads. I've got 123,000 miles on the pickup and have never had to do anything to it other than regular maintenance,” by farm magazines. I didn't find one piece of useful information for my Gleaner combine that I didn’t already know and I'm not about to take a cutting torch to my combine to adjust the separator fan. I feel like I threw away the $16.50 paid for the book.”
Michael Winscher, Royalton, Minn.: He owns a Ford F150 4-WD. "I use the pickup to pull loads of corn. We go 12 miles one-way to the field, pulling 300 bu. loads. I've got 123,000 miles on the pickup and have never had to do anything to it other than regular maintenance."
Jim Ifft, Fairbury, Ill.: 'We've used our 1816 B Case skid steer loader for five years and with only a couple small problems which were easily repaired. We've had mixed results, however, with our 1978 Ford F-150 4-WD pickup. I love the way it rides and drives and the 400 cu, in. motor has 110,000 miles on it without any trouble. The problem is the ¥2-ton transmission and rear-end which are too light to pull grain wagons and stock trailers. They've had to be re- paired several times and replaced once. Also, the truck just eats up tires no matter how we adjust it. "Our worst buys are a Deere 110 mounted field cultivator and an EZ Flow 300 bu. side unload wagon. Both are built light and poorly en- gineered. They've required patching, welding, and beefing up almost every season."
Bill Rush, Rogers, N.M.: We have a 1982 International 1086 tractor that has been almost trouble free. It's the most fuel efficient piece of equipment we have ever owned and it's a pleasure to drive. We also havea 1981 Ford F-150 super cab that has almost 100,000 miles. It’s been a very good vehicle.”
Ford F-250 extended-cab 4-wd pickup
115 Best Buys37 Worst Buys“I bought a 1996 Ford F-250 extended-cab 4-WD pickup with 116,000 miles. It now has 314,692…”
“My best buy is my 1996 Ford F-250. I’ve put 383,000 miles on it, most of them in our small town. I’ve never touched the motor or transmission.”
“Our best pickup ever was purchased new in 2000. It was a Ford F-250 extended cab with a manual transmission and 7.3 diesel engine. With faithful maintenance, including oil changes and air filters, we sold it with 460,000 miles. It was used for ranch work and had very few problems. It was a very fine vehicle.”
“My 2023 Ford F-250 diesel with high output engine gets almost 20 mpg. It has tremendous power, rides very well, and is quiet.”
“My Danuser Intimidator tree puller is very well built (Vol. 40, No. 6; www.danuser.com; ph 573-642-2246). It pulls up to a 6-in. tree, depending on the type of tree. It also pulls heavy shrubs.
“My Ford F-250 with high output diesel has impressive power. So far, it has 24,000 trouble-free miles.
“I have several issues with my Ford Transit van. There’s a lot of wind noise, the steering wheel is uncomfortable, there isn’t an armrest on the left driver’s side, and it’s a very rough ride if you’re in the rear.”
“Our 2002 Ford F-250 with 7.3 diesel has never been a best or worst buy. Today it’s sitting out in the yard, dead on several counts. I liked this truck a lot, and it was great for pulling a trailer. It has 175,000 miles on it now, but the 7.3 engine has needed a lot of repairs over the years. We’ve known that the number eight piston ring had a crack, but it finally blew out leaving that cylinder with no compression. The original Ford transmission failed at 115,000, and now the Certified Road Ripper III transmission has failed with a little over 60,000 miles on it.
“We ordered a Safety Zone Calf Catcher several years ago and haven’t caught a single calf with it yet. I think it’ll work, but you need to catch the calf when it’s pretty fresh and helpless. The time from order to delivery was 2 mos., and that included a lot of phone calls, texts and frustration. It arrived minus the wheel hubs and with a mediocre paint job. Using the Calf Catcher on an ATV or UTV with automatic transmission would help. Also, it takes a while to mount or dismount.”
“My 2021 Ford F-250 pickup is good on fuel. The warranty was honored.
“It’s hard to get parts for my 2011 Deere lawn tractor.”
“I bought a 1980 Ford F-250 in 1988 with 130,000 miles on it. Now we have 362,000 miles on it and all it’s ever needed was routine maintenance. Still running strong.”
Norman’s the satisfied owner of a 2008 Ford F-250 diesel pickup he bought used. “It has required only routine maintenance and just keeps on going. I use it often to pull a camper and boat. It’s not very fuel efficient, though.
“My Ryobi 410R rototiller starts only after many pulls, and even then it starts hesitantly.”
“I bought a 1969 John Deere 4020D used in 1974 and nothing ever goes wrong with it. No major repairs in nearly 50 years. I use it every day, and have never overhauled it. I don’t think new tractors will last this long.
“However, my 2010 Ford F-250 got to 30,000 miles and the exhaust converters failed. Ford attempted to replace them but I ended up having the truck towed from their garage. The entire front end needs to come off because something is wrong with the timing. I have purchased the shop manuals and special tools and will fix it myself. Disappointing as I have had Fords my whole life.”
. “I bought a new 2011 Ford F-250 pickup equipped with a 6.7-liter Power Stroke diesel engine, but by 55,000 miles the bed already had rust holes in it. The dealer said that since the pickup’s 50,000-mile warranty had expired he couldn’t help - even though I’ve bought seven new Fords during my lifetime.”
“I bought my 2000 Ford F-250 pickup with 75,000 miles on it. It now has over 400,000 miles and runs fantastic. This truck’s engine was built before they made changes in about 2003 that didn’t work out too well. This truck is not for sale.”
“I have about 1,800 trouble-free hours on my 2002 New Holland TC29 tractor. It’s well designed and has never been in the shop.
“I had to replace all the steering components on my Ford F-250 heavy duty pickup, but the steering system still vibrates and has excessive play. I also had to replace the fuel injection module, EGR hose collar, alternator, and some 4-WD components. It has only about 65,000 miles on it.”
Richard’s unhappy with his 2003 Ford F-250 pickup equipped with a 6.0-liter engine. “I paid about $44,000 for it, but took it back to the dealer at just 800 miles because it only averaged 8 mpg. The dealer said the fuel economy would improve, but even after making 2 more trips to the dealer it never got more than 12 mpg.
“After the warranty expired I spent about $18,000 on repairs. Problems included replacing the fuel injectors 3 times, the fuel modular control twice, and the transmission twice. Also, every controller on the engine had to be changed at least once.
“My wife and I operated a crane rental service for almost 20 years and this pickup was the biggest piece of junk we ever bought. I put about 110,000 miles on it before selling it back to the dealer for $10,000. My total cost to drive 110,000 miles was about $50,000. That’s expensive driving.”
“My 1996 Ford F-250 pickup equipped with a Power Stroke diesel engine has more than 190,000 miles on it. I recently drove 4,864 miles before changing the oil, but when I did the oil was still bright and shiny. I use Mobil Delvac 15-40 oil.
“I was able to use my Poulan Pro cordless pole saw less than 3 hrs. before it quit working. I took it to 2 different shops but they couldn’t get it to run.”
“The 2002 Ford F-250 diesel pickup I bought used in 2010 still starts and runs like new. No problems even in the coldest weather.
“I’ve put about 100,000 miles on the 2010 Ford Escape I bought used three years ago. It’s very dependable.”
“My 1998 Ford F-250 pickup equipped with a 5.4-liter engine has more than 385,000 miles on it but still runs great. The only major repair was to replace the rear end.”
“My best buy is my 1999 Ford F-250 with its 7.3 L Powerstroke diesel. It has 326,000 miles on it, and all I’ve had to do is replace brakes, batteries, tires, and 2 starters.
“I purchased it new in April of 1998, and it still runs like the day I bought it. I don’t drive it as much as I once did. I used to buy and sell construction equipment, much of which I hauled by trailer with the F-250.
“One thing I still haul with my truck and trailer is another best buy, my Ostenberg tractor. It’s pretty unique.
“A guy named Amos Ostenberg built these tractors in Salina, Kan. in the late 1930’s. He stopped in 1954 when lightning struck and burned down the factory.
“I was in 7th grade in 1950 when a neighbor bought one. Many years later I ran into him at a farm sale and asked what happened to it. He said it had been sitting in the weeds for the past 30 years.
“A few years later he sold it to me, and I restored it. Ostenberg started out using Model A Ford engines and ended up using 6-cylinder Chrysler flatheads. Mine is a flathead. It’s a great pulling tractor, similar to a Farmall M.”
“My 2015 Ford F-250 crew cab longbed pickup equipped with a 6.7-liter diesel engine works great. Its power and fuel efficiency have exceeded my expectations. It rides like a luxury car. In fact, I’d rather drive this pickup than some of the cars I’ve owned.”
On the “worst buy” side, “After we bought our 2012 Polaris 800 Ranger SXS utility vehicle we had to take it to the dealer every year to get the belt and clutch reworked. I liked the machine’s power and interior room, but during the irrigation season the vehicle would often be in the shop for up to 12 weeks at a time. Then I’d have to use my old 1997 Honda 400 4-wheeler as a standby, and it worked well enough to convince me to buy a new Honda Pioneer. The Pioneer doesn’t have as much power, but overall it beats the Ranger hands down.”

Brian Vigar’s 1976 Ford F-250 4-WD, 3/4-ton pickup is equipped with a big 390 cu. in. engine and a heavy duty suspension lift kit.
Read the whole story →A 2013 Ford F-250 crew cab diesel pickup rates as Glen’s “best buy”. “This is my fifth Ford diesel and they just keep getting better. It drives good, has room to haul our grandkids, plenty of power, and is fuel efficient.
“My 2012 New Holland Boomer 40 tractor equipped with a front-end loader is real handy and gets used all the time. The hydrostatic transmission is so easy to operate that even my grandkids can help me.”
“I bought a used 1997 Ford F-250 extended cab pickup equipped with a Power Stroke diesel engine. It had about 126,000 miles on it. This pickup does everything I could expect on our ranch. It’s fuel efficient and has a comfortable ride.”
“My worst buy is my 2006 Ford F-250 pickup equipped with a 6.0-liter diesel engine. I love everything about this pickup except for the engine, which is unreliable and costly to repair.”
Jim likes his 2002 Ford F-250 pickup equipped with a 7.3-liter diesel engine. “I use this pickup to tow my antique Oliver tractors on a gooseneck trailer, and it has never let me down. It rides good and has a lot of power. It’ll probably outlast me.”
“It’s a good truck,” says Arthur about his 2012 Ford F-250 pickup equipped with a diesel engine. “The engine is quiet and runs smooth. This pickup looks and rides good, has good brakes, and a good air conditioner. I don’t like the short 6-ft. 6-in. bed, but I do like the short wheelbase.”
“It has about 86,000 miles on it but has required only routine maintenance,” says Dan about his 2000 Ford F-250 pickup equipped with a V-10 gas engine. “This pickup has a lot of power and gets about 14 mpg on the highway empty.”
On the “worst buy” side, he lists his 2005 Ford F-350 pickup equipped with a 6.0-liter Powerstroke engine. “This pickup had so many breakdowns that I was afraid to leave town with it. I used it to haul hay and farm-related equipment. The engine blew up 3,000 miles after the warranty expired, and I had to spend $8,000 to replace it with a used engine.”
“I like my 2000 Ford F-250 heavy duty pickup equipped with a 5.4-liter gas engine. But at about 200,000 miles I gunned the engine to get out of a ditch and blew out a small hydraulic tensioner on the right timing chain that works on oil pressure. At first the engine lost oil pressure, but it came back. However, the loose chain wore a hole in the cover. Now it sounds like a valve is tapping, and oil is slinging up onto the underside of the hood. The engine still runs okay but I don’t dare rev it up. It’ll have to be fixed or the chain could jump the sprocket teeth. My advice: if you have a pickup with high miles, don’t gun the engine.”
Larry’s “worst buy” is his 2006 Ford F-250 pickup equipped with a 6.0-liter diesel engine. “The engine blew at about 44,000 miles and the company won’t do anything about it. I’ve bought dozens of Fords over the last 45 years, but this is my last one.”
“My worst buy is my 1998 Ford F-250 pickup equipped with a Triton V-8 engine. Just after the 50,000-mile warranty expired, a spark plug blew out of the engine head. Upon close inspection I found there wasn’t enough metal in the head for threads to hold the plug in place. The company refused to do anything to help. I checked on the internet and found I’m not the only one with this problem. In fact, it’s quite common.”
“My 1987 Ford F-250 pickup has been trouble-free. All I’ve done is add new brakes. The original battery wasn’t replaced until last spring, and it still has the original Goodyear tires. It has about 91,000 miles on it. A great pickup.”
“It has more than 400,000 miles on it but still runs great,” says Martin about his 1999 Ford F-250 pickup equipped with a 7.3-liter diesel engine and automatic transmission. “I replaced the water pump and radiator at about 250,000 miles. If I ever need a new pickup it’ll be another Ford equipped with a 7.3-liter diesel engine.”
“My 2011 Ford F-250 pickup equipped with a 6.3-liter, V-8 gas engine and 6-speed automatic transmission is my worst buy. The company claims ‘best in class economy’ for this pickup. Yet it gets only 13 mpg empty and 10 mpg when towing a 7,000-lb. GVW trailer. The engine is gutless, and the transmission is constantly shifting gears with mild acceleration. As a result, I’m always trying to find a power band that doesn’t exist.”
A 1999 Ford F-250 heavy duty 4-WD pickup equipped with a 7.3-liter diesel engine rates as Bob’s “best buy”. “I bought this pickup slightly used in 2000. Now it has about 213,000 miles and all I’ve replaced was an alternator at 210,000 miles, tires at 50,000 to 60,000-mile intervals, and several headlights. This pickup is still running strong and works great pulling a 5th wheel trailer.”
“We purchased a used 1996 Ford F-250 diesel pickup from an estate and put about 200,000 miles on it with no problems. A lot of those miles were spent pulling a 32-ft. 5th wheel RV trailer across the country.”
Ty’s impressed with the 1994 Case 1835B skid loader he bought used 5 years ago. “I use it to do everything from lifting big bales – which it isn’t rated for – to cleaning out a fair-sized number of corrals, all with no problems.
“My 2004 Ford F-250 has been a dependable pickup over the years. It’s powered by a 6.0-liter diesel engine that works great when it’s warm, but I don’t like having to wait for it to warm up.”
“My 2006 Chevrolet Silverado 3500 diesel pickup runs great, can pull heavy loads, and gets great fuel mileage. I wouldn’t drive anything but a Chevy.
“My 1989 Ford F-250 pickup broke down all the time. The fuel injectors and clutch housing on it went out, and I couldn’t keep the tires on the pickup’s twin I-beam front-end. The gas converter broke down repeatedly. I bought this pickup to pull a cattle trailer but finally sold it at a big loss. No more Fords for me.”
“I love my 2005 Husqvarna zero turn riding mower. I use it three times a week to cut my half-acre yard.
“I’m disappointed with my 2001 Ford F-250 pickup, which I just paid off. The back fenders rusted through, and I found out these pickups all rust in the same place. My 1985 Ford F-250 diesel pickup didn’t rust like this. I bought the special $800 paint job that’s supposed to eliminate the need to use wax, and I also bought a special $400 undercoating job. The rest of the truck looks new.”
“My 2002 Ford F-250 pickup equipped with a diesel engine is always dependable. It pulled a travel trailer to Alaska and back and has gone on many other trips. I also use it to pull my flatbed trailer. This pickup consistently gets more than 20 mpg on the highway when empty. It still has the original batteries.”
“My 1977 Stihl chainsaw still starts and runs great. I’ve replaced the bar and several chains, but it has required no other repairs.
“My 2006 Ford F-250 pickup equipped with a Power Stroke engine is my worst buy. It gets poor mileage, and the cooling fan roars at low temperatures. Also, so much mud builds up around the doors that I can’t get in or out without getting dirty.
“My 2006 Ford Expedition is a worst buy. By the time it had 23,000 miles I had already replaced all the tires. It rattles, and dirt around the rear door gasket causes leaks.”
“My 1988 Ford F-250 pickup equipped with a 7.3-liter diesel engine is my best buy.”
“My best buy is a 1990 Ford F-250 club wagon equipped with a 7.3-liter diesel engine. I bought it used 11 years ago with about 109,000 miles on it, and now it has 347,000 miles. It still runs good and the engine has never been touched. It gets 17 to 20 mpg on the highway.”
“It has more than 100,000 trouble-free miles on it. Yet it still runs and drives like new,” says Bill, pleased with his 1999 Ford F-250 pickup equipped with a diesel engine.
“My 1999 Ford F-250 pickup has about 110,000 trouble-free miles on it. It runs great.”
“We’re happy with our 2004 GMLS Golden Fox steel building. We were on our way to pick up the building in Peabody, Kansas, when our pickup quit working 20 miles from town. The company’s head man came out and personally diagnosed the problem with the pickup. He drove to Wichita, bought the part and then - most amazingly - installed it for us right there on the side of the road. How’s that for customer service? My wife and I, who are 75 and 72 years old, were able to put the building up ourselves without any help. This is our second Golden Fox building and we wouldn’t buy anything else.
“Our 1999 Ford F-250 pickup equipped with a Powerstroke diesel engine is our worst buy. The camshaft position sensor went out and left us sitting in the middle of a highway construction zone. We’d been warned that this problem had happened to several other people. What’s really bad is that you don’t get any warning there’s a problem at all.”
“My 1979 Ford F-250 pickup equipped with a 300 cu. in., 6-cyl. engine and 4-speed manual transmission is my best buy. It has almost 200,000 trouble-free miles on it and is economical to own. I sold it to my neighbor and bought a new 2003 Ford F-250 4-WD equipped with a 6-liter diesel engine and 6-speed manual transmission. It has worked fine so far and is more fuel efficient than the old F-250.
“My all-time worst buy is my 1984 Cadillac deVille. The engine started smoking at 60,000 miles. I took the car to the dealer, who called me the next day to say the engine had to be replaced. I told them to stop work on the car, because I wanted to talk to them in person and see for myself why the engine had to be replaced. At the dealership I found the top of the engine had been taken apart and the camshaft was out, and I noticed the camshaft bearings were completely worn out. I’ve never seen an engine wear out that quick, and I’m very careful about regular vehicle maintenance and oil changes. I asked the head mechanic whether this engine was on a recall list, but he wouldn’t give me a straight answer. Instead, he kept insisting I buy their replacement engine. I got angry and told him to put the engine back together, and that I would pay them only for a new gasket kit and keep the engine.
“As I left the service area, I saw a stack of junked Cadillac engines in back of the lot, and to top it off, I found out later that GM had a secret recall on these engines.I ended up swapping the engine with a 350 cu. in. engine equipped with a 4-barrel carbureted engine that came out of an Oldsmobile. Since then I’ve been able to drive the car many trouble-free miles, although the engine has needed some fuel system and electrical modifications. If my Cadillac didn’t have a nice coupe body I’d have junked it long ago.”
“I’m well pleased with my 1997 Ford F-250 pickup equipped with a Power Stroke engine. It has more than 124,000 miles on it with no problems. It spent 75 percent of those miles towing loads, yet it has needed only one frontend alignment.”
Darryl’s disappointed with his 1993 Ford F-250 pickup equipped with a turbocharged diesel engine. “If the slave clutch cylinder fails, you have to replace everything from the master cylinder to the slave cylinder. The dual mass flywheel is also a disaster. The serpentine belt won’t stay on in wet weather, and the belt tensioner has broken twice in two years. This is one sorry truck.”
Patrick’s impressed with his 1979 Ford F-250 pickup. “I bought it used seven years ago with more than 100,000 miles on it. I thought we’d get a year or two out of it, but we’re still using it. This pickup just won’t die even though I’ve shown it no mercy. I’ve used it to pull a 16-ft. stock trailer, to rake hay, and even to pull a 6-ft. tandem disk. I drive it to work every day and have no complaints with it.”
“I bought my 1989 Ford F-250 pickup three years ago. I found that when the temperature dropped to about 50 degrees the pickup was hard to start.
“If I sprayed ether into the air filter it would start right up. So I ordered an ether assist starting kit from a salvage yard - the kind used on IH 86 series tractors - and installed it on the engine. I made a bracket and bolted it on with the two bolts that hold the fuel filter on. I drilled a hole in the bottom of the air filter to attach a 1/8-in. dia. plastic line from the ether assist. I accomplished this by using a 1/4-in. dia. pipe nipple, coupling and reducer in the air filter. I put a push button inside the cab. One split second push on the button and the truck starts good. It cost about $60 for the ether assist and supplies to install it.”
“My best buys through the years have been my Chevrolet pickups. I’ve been buying used Chevy pickups since 1974, usually with 40,000 to 70,000 miles on them. I had to replace the automatic transmission on one model that had been used to pull a large cattle trailer. Otherwise it’s had no major problems.
“My worst buy was my 1969 Ford F-250 pickup. At 12,400 miles the rod bearing started knocking. In 1973 I bought another new Ford F-250, and on that model at 41,000 miles the rod broke and punched holes in the block and oil pan. Needless to say, I haven’t bought any more Fords since then.”
“Leo’s 1989 Ford F-250 pickup, equipped with a 7.3-liter International diesel engine and a 5-speed transmission, has about 250,000 miles on it and is still going strong. “It’s a wonderful pickup. I use it hard and often pull a gooseneck trailer. I’ve changed the oil on it every 3,500 to 4,000 miles. Everything on it is original except for the tires, three sets of brakes, one water pump, a fuel pump, and a power steering pump.”
On the minus side, he lists his 1999 Ford F-250 pickup equipped with a 7.3-liter International turbocharged diesel engine. “The engine works great and the truck is well-designed. However, the 6-speed transmission leaves something to be desired. It’s very noisy. The company says these transmissions are just noisy and there’s no cure. Not a very satisfying answer.”
Michael owns a “best buy” Husqvarna 672 chain saw equipped with a 20-in. bar. “This is the first saw of this size that I’ve owned. It has a lot of power which works great for cutting large trees. Overall, I’ve been pleased with all the Husqvarna equipment I’ve owned which includes three other saws and a leaf blower.
“I’m not happy with the 7.3-liter International Navistar engine in my 1990 Ford F-250 heavy duty pickup. Five months after the warranty expired a head gasket blew, and the same thing happened the next year almost to the day. One year later there was trouble again. This time cracks developed in one of the heads and about half the valve guides were worn out. We thought we fixed it, but right on cue this January the engine started running hot again and with a compression leak into the cooling system. That’s four years in a row with a repair bill each time of about $1,200. All routine oil, filter, and other maintenance has been done by the dealer on schedule. The pickup only has about 82,000 miles on it. I bought this engine because I believed it would be fuel efficient. I learned last year from reading FARM SHOW that the engine was a converted gas engine. If I had known this I would never have purchased it. I’d buy another Ford pickup, but not one equipped with one of these diesel engines.”
A 1999 Ford F-250 super duty pickup equipped with a Powerstroke engine rates as Warner’s “worst buy”. “At 300 miles the engine had to be removed to repair a leak in the oil pan. The cruise control failed as did the daytime running lights. The fit and finish on the cab was subpar. And at 14,000 miles the transmission had to be removed to repair oil leaks at the rear of the engine. All of these happened within the first 15,000 miles. I expect no defects at all on a $35,000 pickup. Ford has a long way to improve quality control. Fortunately I have a good dealer.”
Richard’s happy with his 1999 Ford F-250 heavy-duty extended cab pickup equipped with a turbocharged diesel engine. “It has more pulling power than any pickup in its class and is one of the quietest diesel pickups on the road. I really like the two extra rear doors which are standard equipment.”
One of Gary’s “best buys” is a 1994 Ford F-250 turbo-diesel pickup. “I’ve put 125,000 miles on it with no problems. It still looks new and starts and runs like new. I think more of it every time I price a new one.”
On the negative side, he’s had bad luck with hisDelco power washer. “It didn’t work right when it was new and nobody would fix it. I’d ask dealers at farm shows to fix the washer and they said they’d be out next week, but “next week” never came. Finally, I bought a Panther washer that’s excellent.”
“My best buys of all time are my 1956 Allis-Chalmers WD45 and 1962 Ford 901 tractors. The Ford model is equipped with a diesel engine. I bought both tractors used and they’ve been very reliable.
“My 1995 Ford F-250 pickup equipped with a Power Stroke diesel engine is a best buy.
“MyDeere 332 lawn tractor equipped with a 50-in. mower has about 600 hours on it and is also a best buy.”
“It has a lot of power, handles and looks good, and has a cab that’s easy to get in and out of,” says Dusty about his “best buy” 1999 Ford F-250 pickup.
His “worst buy” is his New Holland 254 rake-tedder. “It isn’t built with quality. The grease zerks pop out, wheel bearings break out, and the jack stand is wobbly. It’s made cheap and is a disgrace to the company name.”
“My best buy is my 1997 Ford F-250 heavy duty 4-WD pickup equipped with a Power Stroke diesel engine and automatic transmission with overdrive. It drives excellent and handles a gooseneck trailer with ease. I’ve owned five Ford pickups equipped with diesel engines over the years and they’ve all been trouble-free.”
“My 1976 Deere 4430 has 8,000 hours on it. The only thing we’ve had problems with is the transmission. It’s a reliable tractor that puts out 144 hp on the dynometer.
“My 1989 Ford F-250 pickup equipped with a 351 cu. in. V-8 engine is my worst buy. It was always in the shop and was hard on fuel. I think the problem is that it’s geared too high.”
“I’m impressed with my 1994 Ford F-250 heavy duty pickup equipped with a 460 cu. in. engine. A rear wheel seal went out when it was still under warranty, but the dealer replaced both rear seals and installed new brake linings at no cost. That’s been the only repair after 80,000 miles, a great deal of which were spent pulling trailers. “My Harbor Freight small bench drill press is my worst buy. It’s underpowered and came apart. First the belt guard broke, then the gauge broke and a bolt stripped in the table.”
He’s had problems with the 7.3-liter diesel engine in his 1989 Ford F-250 pickup. “The pickup had just under 125,000 miles on it when the engine broke down. The mechanics found that the cylinder walls were full of sand holes. To have the engine torn apart, the cylinders bored out and sleeved, and the engine put back together cost me just over $5,000. Through research I’ve found that this problem is happening all over the country. The shop where my engine was repaired also repaired two other diesel engines the week before mine. Both were on newer pickups that had less mileage than mine. The problem is that the engine blocks were cast poorly. “I bought this pickup because I thought it would last 250,000 to 300,000 miles. If anyone has any information about these diesel engines please contact me (833 Rockyford Rd., Amboy, Ill. 61310).”
“My 1995Belarus 805 tractor is my best buy. The only problem is that the valves leak hydraulic fluid. “My 1993 Ford F-250 pickup equipped with a 351 cu. in. engine and automatic transmission is a best buy. It has more than 90,000 worry-free miles.”
His “best buy” is a 1996 Ford F-250 equipped with Power Stroke diesel engine. “It has plenty of power to pull our 24-ft. gooseneck trailer and 300 bu. grain trailer. It gets much better gas mileage than the gas-powered model I owned before.”
“I installed a Caterpillar 1160 V-8, 225 hp remanufactured engine in my 10-yard dump truck. It starts easy, has a lot of power, is fuel efficient, and easy to maintain. “My 1987 Ford F-250 pickup equipped with a diesel engine is my worst buy. The pickup runs good but has a hydraulic clutch that’s poorly engineered. The master and slave cylinders are made from plastic and wear out about every 50,000 miles. It costs about $200 to replace them. Perhaps a system could be designed that uses hydraulic pressure from the power steering system. Why not go back to metal cylinders with stainless steel liners?”
“On a scale of 1 to 10 I rate it a 10,” says George about his 1994 Ford F-250 pickup equipped with a turbocharged diesel engine. “It’s dependable and rides comfortably and it has a lot of power. It’s also easy on fuel. “My 1988 White 120 front wheel assist tractor is our worst buy. It has only 3,000 hours on it but has had a number of hydraulic problems. Last year the powershift transmission went out and it cost $5,000 to repair. The real disappointment is the service. Our dealer went out of business and now our nearest dealer is 70 miles away. We’ll never buy another White.”
“On long trips it rides better than my car,” says Nicholas about his 1993 Ford F-250 pickup equipped with a diesel engine and 5-speed transmission. “It gets 18 to 19 mpg. No problems. My 1987 Ford pickup equipped with a 6-cyl. engine and 4-speed transmission ran good, too. I put 88,000 miles on it without spending any money for repairs.”
“In a recent issue I nominated my 1991 Deere 1070 tractor as my best buy. However, it does have one annoying feature. The loader control lever is positioned too close to the driver’s seat and if you have a big butt like me - I’m 6-ft. 1-in. tall and weigh 240 lbs. - and turn around to your left to see what’s going on behind you, you can accidentally hit the lever without knowing it. The next thing you know the loader is down and digging into the ground. The lever should be positioned to the right and front of the operator, next to the hand throttle. “I’ve had to replace the anti-rattle clips three times on my 1986 Ford F-250 pickup which is equipped with a 6.9-liter diesel engine. It has over 83,000 miles on it and has been fairly trouble-free except for a bad paint job on the hood and top of the cab where the paint has completely peeled off. The company won’t pay to have it repainted, even though between 1984 and 1988 my wife and I bought three vehicles from the same dealer at a total cost of more than $45,000.”
“I bought a heavy duty pickup bumper equipped with twin hydraulic bale spears made by Bramco of Fairview, Okla., and distributed, installed, and serviced by Jespersen Mfg. & Sales, Inc., Neosho, Mo. It’s my best buy. The spears can be easily removed with pins to eliminate bed clutter. I can use it to haul and feed round bales from the comfort of my pickup cab. An additional inexpensive unroller attachment allows me to unroll the bale. I’ve used it for five years with no problems. All I do is grease it. Custom painted or chrome bumpers are available.
“My 1986 Ford F-250 pickup equipped with a 6.9-liter diesel engine is my worst buy. Not one gauge still works on it and some gauges haven’t worked for five years. The oil pressure gauge, both fuel gauges, tachometer, glow plug controller, ignition switch, emergency brake, 6-volt lights, and water fuel separator all don’t work. Parts for it are expensive.
“My 1981 Ford F-150 equipped with a 300 cu. in. 6-cyl. engine is a better pickup by far.”
Dale Davidson, Aneroid, Sask.: Dale's happy with his 1995 Ford F-250 4-WD pickup equipped with a power stroke, turbocharged diesel engine. “It has a temendous amount of pulling power and has been trouble-free. The diesel engine is well matched with the EOD automatic transmission. [use it to pull a 22-ft. fifth wheel live stock trailer and get 15 mpg.”
Larry Timm, Union City, Mich.: “ve owned all colors of 4-WD tractors over the years, but the one I’m proudest of is my 1995 Ford-Versatile 9480, It's a hybrid of the best technology offered by Versatile and Ford. I wouldn't hesitate to buy another one.” On the “worst buy” side, Larry lists his 1994 Ford F-250 pickup. “It rides well and is dependable but isn’t built heavy enough for farm work. It seems to me that any pickup lighter than one ton is only a glorified car.”
Jack Paskvan, Orr, Minn.: Jack's impressed with his 1994 Belarus 572 tractor. “It’s a tough tractor with plenty of power and many good features, yet it sells for only about half the price of other models its size. I'm well pleased with it. hope to have it for a long time. “My 1985 Ford F-250 4-WD diesel super cab pickup is the worst pickup I’ ve ever owned, I’ve had to replace almost everything on it and got no help from the dealer. It has 101,000 miles on it, with 90,000 of them coming after the engine was overhauled at 11,000 miles. [t uses a quart of oil every 200 miles.”
Gary Bruning, Ellsworth, Kan.: Gary's disappointed with his 1991 Ford F-350 4WD equipped with 7.3 liter diesel engine as compared with the 1984 Ford F-250 4WD. “Mileage isn’t nearly as good as with my ‘84, which had a 6.9 liter diesel. It's doggy and doesn’t start as easily when it's cold either,” Al Plumleg, Crown Point, Ind. “I'm absolutely 100 percent satisfied with my 1994 GM Sierra Z-71 4-WD with extended cab. It's roomy, powerful enough to haul big loads, and looks great. Plus, the dealer has been pretty good about service. I bought it 13 months ago and have put 42,000 miles on it. It hasn't missed a day of work.”
Allen Nohl, Sheboygan Falls, Wis.: Allen's happy with his 1995 Ford F-250 4-WD. “It does what I need it to do. It has a great ride and a lot of power.”
Hank Van Dyk, Nitor, Alberta; Hank's happy with his 1992 Ford F-250 4-WD diesel. “It’s a good reliable truck that's comfortable to drive, easy handling, and fuel efficient.”
John O. Darcy, Coal City, IL: “My worst buy is my 1989 Ford F-250 4-WD pickup equipped with a 7.3-liter diesel engine. The rear axle seals leak so much have to replace them about every 10,000 miles. I had to have the engine replaced at about 100,000 miles - the block rusted “I had to replace the engine at 100,000 miles - the block rusted through to the cylinder wall.” through to the cylinder wall.”
Alex Chisholm, Auburn, Ontario: A 1979 Ford F-250 3/4-ton 4-WD pickup heads Alex’s “best buys” list. “It has almost 350,000 miles on it and it still looks and runs great. I put in a 400 cu. in. rebuilt engine at just over 180,000 miles and rebuilt the 4-speed transmission twice, Last year, I had to rebuild the positraction, This truck has been worked hard - [even skid logs with it. It can outpull any tractor up to 65 hp.”
Jake Herzog, Jr., Slingerlands, N.Y.: A 1991 Deere “Gator” 4 by 2 equipped with optional dump box is Jake's best buy. “This machine replaced a trailer I used to pull behind a lawn tractor and a4-WD farm pickup. We use it for hauling stones from fields, firewood to the house, earth around the place, etc. It’s also great transportation to and from our pond. “Our 1993 Grasshopper 718 does everything the company promised. It reduced mowing time by 30% over my Deere 300, which had comparable hp and deck size. The lever-adjusted deck height is a big advantage over comparable front-deck mowers.” A 1989 Ford F250 heavy-duty pickup is Jake’s worst buy. “The 351 cu. in. engine gets worse gas mileage than the 460 engines we use in our other trucks. Also, because the anti-lock brakes have a tendency to malfunction, we've had a few “near misses.’ The dealer says there’s nothing wrong.”
Joe Mode, Howe, Okla.: One of Joe's best buys is his 1993 Ford F250 4-WD pickup equipped with a 7.3-liter turbocharged engine. “This truck has enough pulling power for loads of up to 18,000 Ibs. and still get 10 to 12 mpg, I have 17,500 miles on it and absolutely no dealer attention has been needed. “My worst buy is an 8-ft. Krone rotary disc mower. After owning it two years and mowing approximately 700 acres, this mower fell apart. Several bearings in the cutter bar went out which, in turn, damaged several gears in the bar, Repairs were very expensive. I replaced the mower with a New Idea mower equipped with a 9-ft. cutter bar and have had no trouble with it after mowing over 1,200 acres.
Dean Wolf, Spring Creek Farms, Inc., Howard, Ohio: Dean's disappointed with his Kinze 2000 planter. “We had planted only a few acres when the drive coupler on one of the row units began to cause us problems. We replaced it, but it’s still a problem, A small cotter pin on the single fertilizer opener sheared off, allowing the lock nut to work loose and ruin a seal, We had a hard time finding one to replace it. We called several dealers with no luck lys “Our dealer no longer sells this planter. I talked to one of the factory men at a farm show and explained my problem, but it didn’t help. “My 1994 Ford F-250 Supercab 4-WD is a great pickup. It rides, handles, and performs well and looks nice. We love it.”
Bill Marquardt, Petoskey, Mich.: “I like my 1990 Deere 430 round baler, I’ve never had a problem with it and I really like the bale monitor. It's a necessity for any operator, “I've had trouble with my 1990 Ford F-250 Club Cab pickup. The engine had to be replaced at 70,000 miles because of crank backlash, and the transmission had to be replaced twice because it didn't have ( ( enough cooling capacity. I didn’t get any help from the dealer at all. “T've also had problems with my Gehl 6620 skid steer loader, The servo motors are junk, and the factory cylinder leaks at the welds. This machine just isn’t built well.”
John P. Voigt, South Haven, Kan.: John's the satisfied owner of a 1987 Ford F-250 diesel pickup. “When I bought it Ford used the same exhaust system on both its gas and diesel models. However, the exhaust system had too much back pressure for the diesel engine so I had a new stainless steel exhaust system and a new air cleaner installed. Now the 6.9-liter engine has about the same horsepower as a 7.3-liter engine. The pickup is built heavy and I likeit. “In August 1991 I purchased a new Deere 2355 MFWD tractor equipped with a Deere 245 loader and no cab, It’s the biggest small tractor I've ever owned, I really like how it shifts. I traded a Ford in on it and am glad that I didn’t buy another Ford. One problem is that most Deere dealers order this tractor with economy hydraulic outlets which I had trouble using. I waited until Deere had one of its half price sales, then bought a set of standard plug-ins. “I recently purchased a Deere 7800 MEFWD tractor equipped with a power quad transmission. like the transmission as well as the tractor’s large cab, comfortable seat, and easy-to-fill fuel tank. I traded in a 1988 Deere 4450 MFWD tractor that had 1,100 hours on it. It rode so hard it hurt my back, and it seemed like it was always in the shop for minor repairs.”
Richard Begolka, Atlanta, Ill.: “I can operate it at 7 to 8 mph without covering corn. It does an excellent job,” says Richard, pleased with his Hiniker 5000 no-till cultivator. On the negative side, “The electronic fuel injection and 5-speed transmission on my 1990 Ford F-250 pickup are apparently incompatible. The pickup bucks terribly when partially loaded. The company says this is normal which I regard as an admission of poor engineering.”
Lawrence Jost, Garden City, Texas: Lawrence likes his Case-1H 7150 Magnum tractor. “It’s a good, reliable tractor that’s easy on fuel. A real work horse. All five of our Magnums have been reliable.” On the negative side, Lawrence lists his 1990 Ford F-250 pickup equipped with a 7.3-liter diesel engine. “It's a real lemon. No dealer could solve the problems we had with this truck.”
Ronald Arp, Hills, Minn.: “My 1993 Dixon ZTR 424 mower works great and does a good job. It works fast and is fun to operate. I’ve adapted a lot of attachments to iG bearing lock collars weren’tsettightenough at the factory and belts were poor quality. It wasn’t a dependable machine. “My 1989 Ford F-250 4-WD pickup equipped with a diesel engine has been a nightmare. Almost every part on it, except “Tt's one of the most underated balers on the market. A 10-year-old could operate it.” for the engine, failed before it even had 100,000 miles. I bought it used with no warranty coverage. I'll never buy another used pickup again, partly because I don’t want to go without a factory warranty.”
Wendell Suelter, Lincoln, Kan.: “My 1979 Allis Chalmers 7045 tractor has performed well above expectations. Excellent lugging ability and handles well. “Lcan’tsay enough good things aboutmy 1991 Dew Eze flatbed. We use it to haul round bales and doa lotof other jobs. It's the most valuable tool on our farm, “My 1991 New Holland 855 round baler is the most underated baler on the market. A 10-year-old child could operate it.” On the minus side, Wendell lists his 1989 Hesston 5585 round baler. “It spent as much time in the shop as it did in the field. The pickup attachment was a disaster, The bearing lock collars weren’tsettightenough at the factory and belts were poor quality. It wasn’t a dependable machine. “My 1989 Ford F-250 4-WD pickup equipped with a diesel engine has been a nightmare. Almost every part on it, except “Tt's one of the most underated balers on the market. A 10-year-old could operate it.” for the engine, failed before it even had 100,000 miles. I bought it used with no warranty coverage. I'll never buy another used pickup again, partly because I don’t want to go without a factory warranty.”
Wallace W. Milton, Perry, Fla.: Wallace is the satisfied owner of a 1991 Ford F250 XLT pickup equipped with a truck/ diesel engine, trailer towing package, and no-spin differential, “The torque converter wasreplaced under warranty at20,000 miles, It rides comfortably and gets over 18 mpg empty and 14 to 15 mpg towing heavy trailer loads. Itreplaced two trucks that I had been using.” He says Amsoil synthetic oil is a “best buy”. “I started using it in trucks and cars, then in tractors. Now I use it on all my equipment from chain saws to air compressors. I was so pleased with it I became a dealer,”
Philip M. Broer, Iowa Falls, Iowa: “I like my 1993 Dodge W350 4-WD pickup equipped with a Cummins turbocharged diesel engine. It has a lot more power than the Ford F-250 pickup equipped with a 351 cu. in. V-8 engine that I traded in, It’s also much more fuel efficient. The best the Ford ever got was 11 mpg, butmy Dodge gets up to 20 mpg. The transmission had a problem but the dealer repaired it at no charge. “I like my Perfect Sense stainless stecl fenceline hog feeders (AgriSense Co., Box 446, Grinnell, Iowa 50112). They’re equipped witha horizontal feed distribution wheel that meters feed to hogs. Feed drops into compartments inside the wheel, and when the hog rotates the wheel the feed drops through holes at the bottom of the wheel and into a tray. The hogs have to cat what's on the tray before any more feed will come outso they never waste fresh feed. No adjustments are necessary - all I have to do is fill the feeder. I like it better than the Peterson concrete feeders I had been using. They're hard to adjust to give out the right amount of feed.”
Linwood R. Thompson, Tenants Harbor, Maine: “The front brakes on my 1986 Ford F-250 4-WD diesel pickup are noisy. I had to replace the ‘anti rattle clips’ three timesin 71,000 miles. Otherwise, this pickup has been mostly trouble-free except for a problem with air getting into the fuel system. I couldn't find what was causing the problem so I disconnected the original fuel tanks and hooked up a 55-gal. drum that I mounted in the bed behind the cab. used it that way for two years. Last summer I reconnected the fuel tanks and haven’t had any trouble since then. “My 1991 Deere 1070 diesel tractor starts better and faster than any other diesel tractor I've ever used. Starts right up whether it’s hot or cold. It’s equipped with wet brakes and a synchromesh transmission. I use it mostly for rototilling and mowing. I'd like the transmission better if there was another gear between third and fourth. Third gear goes 1.8 mph and fourth gear goes 3.4 mph. Also, I wish it had overdrive so I could go 17 or 18 mph on the highway,”
Allen Voortman, Granger, Wash.: A 1984 Deere 4050 MFWD tractor, equipped with a Westendorf WL64 loader, rates as Allen’s “best buy”. “It’s an excellent tractor. We have 9,000 hours on itand wouldn’t trade it for any new model. I really like the 15-speed powershift transmission. The loader has held up well except for the mounting brackets, which we had to rebuild.” On the “worst buy” side, Allen's had trouble with his 1990 Ford F-250 pickup equipped with a 7.3-liter diesel. “The transmission has had all kinds of problems and the brakes failed twice. The fuel pump and glow plugs had to be replaced and the igni- tion switch failed. The hinge on the driver’s side door broke, and the seat is already showing wear. All the paint has peeled off the hood and now the paint on the roof and sides is also starting to peel off. The pickup has only 50,000 miles on it, I'd like to trade itin for a new Dodge.”
Tim Dillon, Sumner, Iowa: Two years ago, Tim bought a used 1985 Ford F-250 pickup equipped with a 460 cu. in, engine and 4-speed transmission. He says it’s his “best buy”. “It has plenty of power to pull anything I put behind it. No major problems. My only complaint is that it gets only 8 to 10 mpg loaded or empty.”
John T. Dougherty, Waukon, Iowa: , John T. Dougherty, Waukon, Iowa: _ “My 1989 Ford F-250 pickup is my worst ( I—-_/ — FARM SHOW e 15 Best & Wo ( buy. In the first 29,000 miles the cruise control quit working, the seals on the rear axle leaked and had to be replaced, fuel injectors on the engine had to be replaced, the water pump had to be replaced, the power steering pump and fuel pump quit working, the brakes and lights needed work, and all four tires went bad. It uses so much fuel it would be cheaper to hire my trucking done. I spent more than $600 for repair work not covered by warranty. If Ford wants to sell lemons they should get in the fruit business.”
Allan Suchy, Osage, Iowa: “My Yetter ‘residue manager’ row cleaners clear 6 to 8in. wide strips free of trash, resulting in much better seed emergence. “I bought my ‘worst buy’ 1988 Ford F250 pickup used with 20,000 miles. The 351 cu. in, fuel-injected engine didn’t have enough power and got only 4 to 6 mpg. I if rst Buys US page) installed new computers and sensors but that didn’t help. I called the company and a representative told me they had trouble with this engine between 1988 and 1991. They suggested I trade the pickup. I did and gota 1993 Chevrolet equipped with a 6.5-liter diesel engine. So far it has shown good power and gets 15 to 17 mpg pulling a 22ft. trailer.”
Norman Probst, Brady, Texas: Norman’s pleased with his 1992 Ford F250 diesel pickup, but says it could use one improvement. “It’s a good work truck, but needs a bit more power for pulling gooseneck trailers loaded with cattle. It’s fairly fuel efficient when loaded.”
Jay H. Mennenga, Wellsburg, Iowa: “Our 1988 Deere MFWD tractor is easy to drive and always starts right up. The powershift transmission works perfect. “Our 1990 Deere 4255 tractor also runs perfect. “Our 1989 Ford F-250 pickup is our worst buy. Both doors are bent. The 5-speed transmission is geared too high - the pickup has only 60,000 miles but is already on its third clutch.”
Francis Baker, Sylvania, Ohio: “Our Deere 4020 tractor has over 12,000 hours and our Deere 4440 has over 6,000 hours. They’re both best buys. “Our 1985 Ford F-250 pickup, which we bought used last year, is also a best buy.”
Harold Brown, Camargo, Ill: “My Deere 725 mower is the best front-mounted mower I've ever used. The steering wheel and deck adjustment make it easy to use. I can mow my lawn at whatever height I want. “JT unloaded the contraption rather than let it take up room in the shed.” “My worst buy ismy M-C stalk shredder. The drive shaft snapped in the rotor and had to be hauled to the company to be rebuilt. I gota big bill for the overhaul. I unloaded the contraption rather than let it take up room in the shed.” Thomas R. Bentley, Farmersville, Texas: Thomas is generally satisfied with his 1991 Ford F-250 diesel pickup, but says it could use a few improvements. “The fuel filter is difficult to service. The body construction, door material, and workmanship could be better. The brakes catch small rocks, making a lot of noise.”
Thomas A. Townsend, Boring, Ore.: Thomas has had trouble with his 1988 Ford F-250 diesel pickup. “After about 1 1/2 years the paint on the hood started to peel. The dealer told me the warranty had expired but they offered to paint the hood. However, I thought thata factory representative should have atleast looked at the pickup to evaluate the entire paint job so I tried contacting a factory representative. Unfortunately, I was only able to talk to a secretary, I wrote a letter to the company and they said they were sorry wasn’t happy with the pickup but didn’t do anything. I now know why people are buying foreign products. “My Kuhn disc mower does a good job in down hay and is a best buy.”
Dan Hurley, Elmira, N.Y.: “My 1991 Ford F-250 pickup is my worst buy. It had less than 8,000 miles when the reverse gear went out of the standard transmission. It took over a month to get parts. I was told by a dealer employee that these transmissions aren’t built heavy enough for a 3/4-ton pickup.” Max R, Schiele, Jr., Lambert, Miss.: Max says he’s generally satisfied with his 1990 Case-IH 7130 tractor but he’s had a few problems, “It has adequate power and handles well with good comfort and fuel economy. However, the engine block could be improved. It’s asolidcast block, and I've had problems with sand holes and cracking cylinders, I’ve also had to update too many items al my own expense,”
Charles Dorris, White House, Tenn.: Charles's “best buy” is his 1988 Massey Ferguson 383 tractor, “It starts casy and has great power. Works like a much higher horsepower machine,” On the “worst buy” side, “My 1986 Ford F-250 pickup equipped with a 351 cu. in. engine and automatic transmission gets poor gas mileage and could use more pulling power. It should have a 460 cu. in. engine.”
Jerry Reiling, Lake View, Iowa: Jerry's 1989 Ford F-250 pickup equipped with a 7.3-liter diesel engine and 4:10 rear end heads his “best buy” list. “It has 52,000 miles and, other than normal maintenance, all I've replaced is an alternator belt. 1 use it to pull a 24-ft. gooseneck trailer with a 12,000-Ib, payload. It gets 17 mpg when emply. “My worst buys are tools from Taiwan. Any I've tried have failed within a very short time.”
Tom Markley, Canton, Ill: “Never a moment's problem except for a faulty light switch,” says Tom, pleased with his 1990 Ford F-250 pickup. On the “worst buy” side, “I had my 1988 Ford F-150 less than a month when the Starter went out and the synchronizer in the transmission failed, It took the dealer a month to get a new synchronizer and later the starter went out again. The fuel gauge lasted only 7,000 miles, the rear U-joint 18,000 miles, and tires about 12,000 miles.”
Mike Krajacic, Avella, Penn.: “It always starts and gets fairly good mileage, but it could use a litte more power,” reports Mike, owner of a 1986 Ford F-250 diesel pickup. Mike’s “best buy” is his 1986 Deere 4450 tractor equipped with mechanical front wheel drive. “It has good power and the 15speed transmission is great. The front wheel drive provides a lot more traction when we plow down liquid manure.” His “worst buy” is his 1985 International 5100 grain drill. “The hay seed settings are very inaccurate, and the seed tubes kept plugging up so I had to install larger ones. If I leave fertilizer in it for more than 48 hours it'll freeze up.”
Walter Rowcliffe, Osage, Iowa: Walter is “very satisfied” with his 1985 Ford F250 heavy duty diesel pickup. “It gets 8 to 12 mpg and I can count on averaging 10 mpg while pulling my 31-ft. uailer. My only expense in 58,000 miles has been to replace a vacuum pump. I ordered the pickup with a 4:10 rear end to pull the trailer. My solo mileage was 14 mpg. After adding a 20% overdrive, I gained 1 mpg. If Ford would include a 30% overdrive on this low ratio rear end, I believe the solo mileage would be much better.”
Ralph Arnold, Keosauqua, Iowa: His 1989 Dodge Arics automobile heads his “best buy” list. “It isn't a Chrysler New Yorker, but it’sa good little vehicle that gets 25 to over 30 mpg depending on length of drive.” e Robert's “worst buy” is his 1982 GMC 350 diesel pickup. “The brakes failed after 4 months and the engine, rear end, and transmission went out with less than 40,000 miles, have a lawsuit against the company.” His “best buy” is his 1986 Ford F-250 diesel pickup equipped with a4-speed transmission which he uses to pull a 26 by 7 1/2ft. gooseneck trailer. “It’s economical to run and has been trouble free in 142,000 miles.”
Lynn Whittlesey, Atwater, Ohio: “It's trouble free, easy to operate, and does everything the company said it would,” says Lynn, happy owner of a 1989 Hardy outside woodburning furnace, Robert's “worst buy” is his 1982 GMC 350 diesel pickup. “The brakes failed after 4 months and the engine, rear end, and transmission went out with less than 40,000 miles, have a lawsuit against the company.” His “best buy” is his 1986 Ford F-250 diesel pickup equipped with a4-speed transmission which he uses to pull a 26 by 7 1/2ft. gooseneck trailer. “It’s economical to run and has been trouble free in 142,000 miles.”
Clarence Fitchett, Locustville, Va.:““My 1990 Hardi model 6SOICM sprayer is a best buy. I’ve used it to spray more than 1,000 acres of wheat with only one minor problem - a set screw that wasn't tightened at the factory.” Robert Bristle, Brooklyn, Mich.; Robert's “worst buy” is his 1982 GMC 350 diesel pickup. “The brakes failed after 4 months and the engine, rear end, and transmission went out with less than 40,000 miles, have a lawsuit against the company.” His “best buy” is his 1986 Ford F-250 diesel pickup equipped with a4-speed transmission which he uses to pull a 26 by 7 1/2ft. gooseneck trailer. “It’s economical to run and has been trouble free in 142,000 miles.”
Paul Brown, Blairsville, Ga.: Paul is the satisfied owner of a 1986 Kubota 2850 uactor and front-end loader. “I haven't had any trouble with it at all. The 4-WD is fantastic.” He also likes his 1984 Ford F-250 diesel pickup. “It has 76,000 miles and all I’ve done is change the oil and filters and install new lires.”
D.J. Davidson, Centerburg, Ohio: A 1989 Ford F-250 pickup equipped with automatic transmission and a 4:10 rear end is DJ.’s “worst buy”. “The first month owned it a grease cap constantly fell off inside one of the front wheel covers, fnally removed it, At 10,000 miles both rear wheel seals began leaking. They're only $4.50 ata parts house, but because the truck is a 1989 model the seals weren't stocked yetso Lhad to pay a Ford dealer $26 apicce. The 6-cyl. fucl-injected engine runs rough and gets only 12 mpg. Most V-8 engines get better mileage than that. The headlights were adjusted so high at the factory that the birds in my area wore sunglasses at night so 1 wouldn't blind them.”
James Witter, Shippensburg, Penn.: James has had trouble with his 1985 Ford F-250 diesel pickup, particularly the brakes. “It's only got 47,000 miles but we've already installed four master cylinders and three sets of brake pads. We also had to replace a clutch.”
C.A. Montague, Duffee, Miss.: “My 1988 Deere 2755 tractor is casy to operate and has plenty of power.” On the negative side, “My 1987 Ford F250 diesel pickup has caused me a world of trouble. It gets poor fuel mileage and the cruise control went out.”
Ralph Baldridge, Gillespie, Il.: Ralph likes his 1988 Ford F-250 Lariat 4-WD pickup equipped with an automatic transmission. “It hasan excellent ride and feel for a 3/4-ton pickup. I frequently use it to haul loads of three tons or more, but it still rides level and handles like it’s empty. The center arm rest is super comfortable and the red and white ‘styleside’ body, with a white top, is eye-appealing.”
Charles Norman, Pine River, Minn.: “This is the best driving pickup I’ve ever owned,” says Charles, owner of a 1986 Ford F-250 4-WD equipped with a 302 V8 engine and automatic overdrive 4:11 gears. “We pull a 20-ft. cattle trailer in standard transmission, Otherwise we use overdrive. It gets good mileage and is pleasant to drive.” Charles had bad luck with his Sears 3/8in. drill. “The jaws are softand the gears are made from poor material.”
Wesley Jones, Rule, Texas: Wesley's “best buy” is his 1988 Deere 4450 with MFWD Quad Range transmission. “The front wheel drive assist works great for pulling equipment. It’s the best thing ever invented,” A 1985 Ford F250 3/4 ton pickup equipped with a 351 HV engine and automatic transmission has been a disappointment. “On a good day it gets only 10 mpg. I could drive a 460 engine as cheap as I can drive this pickup.”
Jim Ross, Culvertson, Mont.: “It runs like a top and gets good fuel mileage,” says Ramona, whose 1983 Ford F-250 3/4-ton diesel 4-speed pickup has nevertheless had some problems. “The rpm range between third and fourth gears is too wide. It’s difficult to get the rpm’s up when I’m pulling a 20-ft. livestock trailer.”
Lamar Faught, Jonesboro, Ark.: Lamar'’s “best buy” is his 1986 Ford F250 4 by 4 diesel pickup equipped with 4-speed transmission. “We use it to pull a trailer loaded with a backhoe - a 16,000 Ib. load. It drives great and averages 16 mpg. It’s a much better truck than the 1979 Ford F250 we owned before.” He also like his 1977 Ford 6600 tractor. “It handles well, doesn’t use much oil, and is powerful for its size.”
Gurney Snyder, Marion, Ohio: Gurney’s 1976 Ford F-250 4 by 4 pickup heads his “best buy” list. “This pickup has over 103,000 miles on it so it doesn’t owe me one thing, I've used it to pull a lot of wagon loads of com and beans out of the field. The only repairs I've made were to grind the valves, realign the brakes and replace knuckles on the front drive wheel. The transmission hasn't been touched,” Gurney is also pleased with his 1986 Ford Taurus. “It has 40,000 trouble-free miles and is a pleasure to drive.”
Elton Ballien, Frankenmuth, Mich.: “The best buy I’ve ever made isa 1979 Ford F250 pickup with a 460 cu. in. engine. This pickup has 130,000 miles but it still has the original brakes and exhaust and there’s no rust. I changed the water pump two years ago and the starter one year ago. It should get 250,000 miles easily.”
Roger Bachman, Hopedale, Ill.: “My 1986 Ford F-250 4 by 4 pickup rides good for a 4-WD nd is a pleasure to drive. The 460 engine has plenty of power for pulling my 16-ft. yooseneck grain and livestock trailer.”
Donald Plett, Davenport, Iowa: “It’s built like a tank and handles heavy loads easily,” says Donald, pleased with his 1979 Ford F-250 pickup. “The 460 engine has terrific power, acceleration and speed. It's hard on gas but it’s worth it.”
Robert Fasig, Lakeville, Ohio: “We had to buy a used 1980 Chevrolet pickup so we would have something to drive while our 1987 Ford F-250 4-WD sits at the dealership,” says Robert. “Its 460 cu. in, engine averages only 4 to 5 mpg, possibly getting 8 mpg running empty on the interstate. It doesn’t even have enough power to go up small hills. If you keep the rpm’s over 3,200, itruns great. The trouble is, at55 mph in fourth gear, the tachometer shows 2,000.” Robert ranks his 50 by 100 ft. Universal steel quonset, erected a year ago, as a “best buy”. “It was cheaper to construct than a pole building and much cheaper to insure. The two 15 1/2 by 24-ft. door openings allow easy access for machinery, and the birds can’t find a rafter to set on in the summer.”
Davie Beachy, Arthur, Ill.: He likes his 1987 Ford F250 4-WD diesel pickup. “It easily pulls a 20-ft. by 7-fi. stock trailer and Starts right up in winter weather. We’ ve had few problems and good dealer service.”
William L. Fry, Middleburg, Penn.: “It’s economical to operate and rides better than many cars with an extremely comfortable seat,” says Fry, pleased with his “best buy” 1986 Ford F-250 diesel Lariat pickup.
Richard L. Caswell, Narvon, Penn.: “I’m completely satisfied with my 1988 Ford F-250 4-WD pickup. High-quality workmanship is why Ford remains the best vehicle manufacturer in the world. This truck handles well on or off the road and is much more truck for the money than comparable GMC, Chevy, or Dodge models.”
Ken Nelson, Ft. Collins, Colo.: “The extended warranty for our 1986 Case 2292 tractor is our worst buy. The tractor is great but we bought the extended 4-year, 1,800hr. warranty. The problem is that the tractor has the new hour meter that registers ‘true’ hours. In other words, 60 min, of operation adds up toone hour, Old meters were based on engine revolutions and you could cultivate at an idle and put on only one or two hours a day. Now it’s easy to put 12 to 14 hrs. aday on the tractor. The 1,800 hrs. were used up in one year.” Ken’s “best buy” list is headed by his Donaldson post driver he bought from a local farm supplier. “It’s made in New Zealand and drives the postin much quicker than you can drill a hole. The thing I like is that the post is in tight when you drive it, “Also on the best buy side is our 1986 Ford F-250 pickup with a 302 fuel-injected engine. We have 67,000 miles on it and we haven’ teven putnew spark plugs init. [thas plenty of power, starts quickly in all kinds of weather, and does not cough or sputter even onacold morning. Drives and handles very well.”
Gary Norst Buys revious page) Silverado pickup. “Gas mileage with this truck's fucl-injected engine is excellent and ithas the extra power needed to tow trailers, Itrides like acar and has large windows that give you a good view of the road.” Randy Huntington, Darlington, Wisc.: Randy’s “best buy” is a 1987 Ford F-250 4-WD pickup. “It’s a pleasure to drive thanks to the 460 cu. in. engine and 5speed transmission. It has no problem pulling a loaded cattle trailer. I like the heavy tailgate.” Eugene Crummy, Argyle, Minn. “We're pleased with our 1980 Deere 4440 tractor. Ithas been trouble-free in 8 years of use. It'll do any of the jobs necessary on my 580 acre grain and sugar beet farm.”
David Wierenga, Nunica, Mich.: He’s had trouble with the steering on his 1985 Ford F-250. “It’s always a battle to keep it ninate suys on the road. The dealer has worked on the front-end many times and replaced several parts but it still doesn’t handle well. I also had trouble with the starter at 30,000 miles.” David's pleased with his 1986 Kubota 8200 tractor. “It’s an excellent barn tractor because of its small size and good loader. I haven't had any trouble with the tractor even though we use it for work meant for a much larger tractor.”
Neil Kruger, Warren, Minn.: “My 1985 Volkswagen Jetta diesel auto has good power, handles beautifully, is very comfortable, and gets 45 to 50 mpg. At 50,000 miles it has given no mechanical problems, “Our 1480 Case-IH Axial Flow combine does an excellent job harvesting small grains, soybeans, corn and sunflowers. Good dealer service, too.” On the negative side, “Our 1983 Ford F250 4-WD diesel pickup has given problems right from the start, burning out glow “The dealer wouldn't admit that he didn't know what the problem was.” plugs regularly. The dealer wouldn't admit that he didn’t know what the problem was. After 3 years and much out-of-pocket expense we finally got Ford to solve the problem. The diesel pump also was faulty and had to be overhauled. It drives nice but gets only 15 to 20 mpg with no load.”
Dan Hutchinson, Marion, Mich.: He's had trouble with his “worst buy” 1985 Ford F-250 diesel pickup. “The dealer said we'd get 18 to 20 mpg but I only get 10 to 13 mpg. Seven months after buying it, diesel fuel began turning up in the engine oil. After 3 1/2 months, many phone calls, and several trips to the dealer, they finally replaced the fucl pump. Since the repair, the engine has low pressure and uses an excessive amount of oil. The dealer won't do anything about the use of oil so I contacted Ford customer service in Detroit. They sertme back to the dealer. Now, a year and a half later, I just keep adding more oil.” On the positive side, Dan's pleased with his 1986 Same 130 FWD tractor. “This is the second Same tractor I’ve purchased. They both run almost trouble-free, get excellent fuel economy, and are easy to operate. This tractor’s air-cooled engine starts at 20° below zero without the use of starting fluid, glow plugs or block heater.”
Ray Hicks, Andalusiz, Ala.: A Hardy outside wood-burning stove heads his “best buy” list. “It does a wonderful job of heating my house and water with less wood than I ever imagined. Excellent performance.” On the minus side, he’s had trouble with his 1986 Ford F-250 pickup. “Gasoline consumption is high at less than 10 mpg. At about 5,000 miles the passenger door got out of adjustment. The dealer fixed that but now the door won't unlock from the outside.”
John E. Taylor, Canton, Ill.: “It’s a great farm hand,” says John, happy with his “best buy” 1977 Ford F250 4-WD pickup. “It’s been the most dependable vehicle I’ve ever owned with 90,000 trouble-free miles. The 460 engine handles any load, hauling or pulling, and it’s always ready to go.”
Kevin Rosenbohm, Graham, Mo.: “The worst buy I’ ve made recently isa 1985 Ford F250 with a 460 engine | bought two years ago. Asa whole the pickup is fair but it’s the lite problems that drive you nuts. The pollution conurol never worked so | finally cutthe drive belt, The power steering pressure line leaks even after replacing the 14+ FARM SHow || Vorst Buys eding page) line twice. The air conditioning did not work when itarrived from the factory, The muffler cracked apart at 20,000 miles, the windshield leaked above the steering wheel from day one, the antifreeze recovery tank leaked, the right wheel will not self adjust, and the tin work is too thin, Tsend ittoa local body shop every 6 mos. for normal body work. The best thing about this truck is the 460 engine and our local dealer, who has done a great job of service on these problems.” On the plus side, Kevin's pleased with his 1985 Honda 250 3-wheeler, “This is the third one I've owned. All have performed perfectly, The reverse on this machine is handy and it has excellent power with wellbalanced weight. The handiest machine on our farm.”
Don Ward, Chula, Mo.: “My 1986 Ford F-250, 4-WD pickup, with 300 c.i., 6-cyl. engine has been one of the best buys I've made. In 15 months, I’ve put on 30,000 miles with no troubles, It gets 18.5 mpg. “Another bestbuy isa 1978 Deere 4040 tractor. No troubles and excellent dealer service.”
Wayne Herrick, Hill City, Minn.: “My 1985 4-WD Ford F-250 diesel pickup starts good in our northern Minnesota winters. It handles a tri-axle trailer very nicely. Even with all the extras, it gives a very comfortable ride with good mpg.” He’s not as happy with “imitation visegrip pliers bought through Harbor Freight, out of California. The adjusting screw slips and if it does hold, the teeth in the jaws strip off.”
Shafe Boles, Shelbyville, Kty.: “This 1985 Ford F-250 with 6-cyl. engine is the first Ford we've had after many GM and Chevy trucks which all seemed to rust out badly. The Ford performs very well as a farm truck but does run out of power pulling a trailer. But, overall we're wellpleased.”
Elk River, Minn.: "Hasn't cost me a dime in 65,000 miles. Gets 20 mpg, has good power and doesn't use oil," says Eddie about his "best buy" 1983 Ford F-250 with 6.9 diesel engine. "Other best buys are a used 1972 1066 International tractor that I've had for 6 years and a 1986 Chevrolet Monte Carlo with a 4.3 V-6 engine. "Gets 28 mpg, drives and rides nice and doesn't use oil, It's just a nice all-around car.” Herb St. Germain, Unity, Sask.: "I bought this 1985 GMC 2500 4-WD diesel pickup used. It's economical, gets 28 mpg and runs like a clock. Has good power and runs like a clock. I'd certainly buy another."
Dean Wakefield, Newark Valley, New York: ‘My 1986 Ford F250 with 6.9 liter. diesel engine used 1 qt. of oil every 400 miles and lacked the power to pull our cattle trailer. The dea: er changed the air cleaner housing which reduced oil consumption to 1 qt. per 800 miles, I recently added a Hypermax turbo charger kit to the engine. Now it has more power than we need, fuel economy is much better and oil consumption is no longer a problem. "I'm also happy with my Farmi 400 log skidding winch, It's easy and fast to use Saves a lot of wear and tear on the tractor. "The most versatile piece of equipment on our farm is a 632 Melroe Bobcat. We've had no problems and good service. We use it every day for chores like cleaning pens, feeding, plowing snow, packing silage and changing tires."
Herman Cuetan, New Castle, Penn.: “I like my Ford F250 diesel Fuel economy is great. Gets 15-16 mpg pulling a 16-ft. gooseneck flatbed trailer and 18-20 mpg puttering around the farm. Maintenance is fairly easy but workmanship seems to have gone downhill from older pickups,”
New Castle, Penn.: “I like my Ford F250 diesel Fuel economy is great. Gets 15-16 mpg pulling a 16-ft. gooseneck flatbed trailer and 18-20 mpg puttering around the farm. Maintenance is fairly easy but workmanship seems to have gone downhill from older pickups,”
David Shira, Cortland, Ohio: David’s well-pleased with his 1986 Ford F-250 pickup. “Nothing's gone wrong so far and it rides good. It could get a little better gas mileage, though.”
Gordon Koch, Hudson, Iowa: Gordon lists Ritchie paddle-type hog fountains as ‘‘worst buy’, ‘‘We bought 10 of these and installed them in a pig nursery. The paddle pivots ona roll pin. After a few weeks, the pin wears enough to fall out and the paddle disappears. New paddles and pins don’t help because the pin holders also wear. We tried cotterpins of various sizes for awhile but finally tore everything out and replaced them with another brand.” On the positive side, Gordon's happy with his 1983 Ford F-250 diesel 4-WD. “It’s gone 60,000 miles and has required no repair except for one head gasket. Some of that mileage was spent pulling a 6 x 20-ft. gooseneck livestock trailer."
Rob Wallace, Hamilton, Iowa: “I'm very well pleased with my 1985 Ford F-250 4-WD diesel pickup with 4-speed transmission. After more than 25,000 miles in 16 months, haven't had any trouble at all. Cold weather starting is no problem. The XLT cab greatly reduces noise.”
Jerry Blindert, Salem, S. Dak.: “My 1979 Owatonna 260 windrower is probably my worst buy. Breaks down easily and parts are not easily available. “I'm happy with my 1983 Ford F250 diesel pickup. It has lots of power and good fuel economy. Service is great and it pulls my 6 by 20-ft. stock trailer with ease."
Steve Robinson, Mechanicsville, Iowa: Steve's "worst buy" is his 1982 Ford F250 4-WD with a 400 cu. in. engine and 4-speed transmission. "The original motor in this truck was junk. It had virtually no power. It was supposed to be big enough to be used for pulling 5th wheel trailers but, after 30,000 miles, it had to be overhauled. Then, at 65,000 miles, I replaced the engine. Now | finally have a truck that will do what it was intended to do." Steve's International 4500 28-ft. field cultivator, equipped with a Krause coil tine harrow, heads his "best buy" list. "I've used it for 4 years with no trouble. Does a good job of leveling ground and has excellent trash clearance."
Kirk Banks, Westfield, Lowa: "This pickup is tightly crafted and built strong. Plenty of power and it's good on fuel, providing a smooth ride and handling. Not one problem in over 20,000 miles," says Kirk about his 1984 Ford F250 with 300 cu. in. 6-cyl. engine and 4-speed transmis- sion. "My best buy ever is a 1980 Deere 4440. Rated at 130 hp., this tractor turns 165 on the dyno. It never quits. The cab is the envy of the industry. The smoothest, quietest, nicest tractor made. Never a problem in over 2,500 hrs." On the minus side, Kirk had trouble with a Snapper 30-in. riding lawnmower. "Very poor design and workmanship and very little capacity. Everything, including motor and blade, is out of balance. The bagger functions poorly, plugging frequently."
Norman Schwartz, Oak Grove, Mo.: "Best truck I've ever owned, In 50,000 miles I've had no problems. It does everything you could expect from a pickup. Plenty of power with good mileage towing a gooseneck trailer or just running errands," says Norman, citing his 1984 Ford F-250, 4-WD, 6.9 liter diesel engine pickup as "best buy".
Charles A. Sargent, West Danville, Vermont: ''My 1985 Ford F-250, 4-WD diesel pickup has good power, gets 20 mpg, and rides and handles excellently."
Don Stirling, Morpeth, Ont.: “You never get tired before quitting time because it’s so comfortable to operate. It's one-third easier on fuel than our Allis Chalmers 7060 and International 1066 working the same land and pulling equipment that's twice as wide,” reports Don, happy with his “best buy" 8070 Allis Chalmers tractor with front-wheel assist. Robert Viktora, Hot Springs, S. Dak.: ‘This truck's had numerous problems with the electrical system affecting light switches, cruise control, and the fuel and temperature gauges. It also had a defective door hinge and spring. The vacuum pumps for the vacuum system failed at approximately 26,000 miles. On the plus side it does have a good engine, and drive train. We also like the cab and load capacity,” says Robert about his 1983 %-ton Ford F-250 diesel pickup.
Lamar Faught, Jonesboro, Ark.: “Within the first year of use, the power steering pump went bad, the carburetor had to be worked on several times and it wouldn't run very well with all of the pollution control equipment on it. The heater core had to be replaced, along with the rear “With only 45,000 miles, it has me wondering what’s going to go wrong next.” shocks and transmission valve body, This prompted the purchase of an extended warranty before the truck reached one year of age,” says Lamar, upset with his 1979 Ford F-250 pickup with a 400 engine. “Since then, the warranty has paid for the removal of the left head because it was warped, the replacement of two water pumps, the first of which was faulty. There was also a hole in the body that allowed rain water to run into the heater system. This caused the defroster to fog the windows over instead of clearing them off. All of these problems happened before 25,000 miles. “Since then the radiator has had to be cleaned out 3 times, the fuel pump replaced, and the front springs replaced because they allowed the front end to sag and the wheels to ride on the spring brackets. Dealer service has been very good but only about half the problems have been covered by the extended warranty. With only 45,000 miles on it, it has me wondering what's going to go wrong next.” Lamar’s had better luck with his Bush Hog 256 3-pt. hitch attaching rotary cutter, “For the price, it's the heaviest-built mower we could find. It does a very good job on grass and brush, leaving a clean path behind it,” the injector pump auxiliary drive and a gasket on the left front planetary hub.” He's had troubles, though, with his Lilliston 284 8-ft. drill. “Before could put it to use I had to realign most of the hoe shanks with the packer wheels, Secondly, noticed either the pitch on the drive sprocket or the chain pitch wasn’t right on the fertilizer attachment as the chain would climb the sprocket. “After I'd seeded only 120 acres, the main drive chain from the packers started jumping off. I find this very disgusting, as it makes a mess in the field with unseeded strips. After checking that no pins had been sheared, I put the chain back on and checked to see that it fit the sprockets. It seemed alright, so decided a small stone may have made the chain come off. This happened two more times in short order, and it seemed to have something to do with the speed I travelled. As long as I stayed at half throttle the chain stayed on, but not at full throttle. This only lasted about half a round before the chain came off at the slower speed. “After half an hour of careful checking, I noticed that the clutch sprocket didn’t line up with the chain. I moved the secondary shaft to line it up and figured I had the problem solved. It worked for a while but then the chain started coming off again and this time I noticed the chain was climbing the sprocket. finally called the dealer. He replaced all the defective parts at no cost, but! feel the manufacturer is pretty sloppy with the parts and materials it ‘supplies as well as the way they set the machine up.”
Joe Rosengrants, Springfield, Colo.: "Our 1984 Ford F-250 diesel pickup cannot pull a trailer, which is what we bought it for. We changed the gear ratio in the rear end ourselves but it still wouldn't pull. Fuel economy is also bad at 7 to 10 mph. The dealer would hardly touch the pickup and charged us every time he did regardless of the warranty. "We've had no problems with our Deere 4840 tractor. It has performed at peak performance and has an abundance of power. Has required no dealer service."
Kenneth Alleman, Sardis, Ohio: “We're very satisfied with our 1980 Ford F250 4-WD truck. It has a 300 cu, in. 6-cyl. motor. The only thing it needs is a stronger step bumper. had to reinforce it with a stronger hitch to pull a trailer.”
Don Wogen, Marshalltown, Iowa: “I bought a 1982 Ford F250 4-WD pickup this summer, It has a 351 engine with a variable venturi carburetor. The pickup is fine but that carburetor is a joke. The pickup has no power with it so I'm in the process of changing to a Holley carburetor.” On the plus side, Don's pleased with his ‘best buy’’ Deere 17-ft. cutter chisel. “It stays in the ground and the walking axles keep it from jumping. The only problem we have had with it is the hitch, which is not built strong enough.”
Ford F-350 460 V8 pickup
54 Best Buys25 Worst BuysThey’ve been impressed with a Husqvarna 3120 and several 395 chainsaws. “We’ve used Husky saws in our tree-trimming business since 1986. They’re darn good products and just keep on cutting. We use 24 to 48-in. bars with no trouble and plenty of power to get the job done.”
On the negative side is a 1994 Ford F-350 460-cu. in. V8 fuel-injected pickup truck. “It’s just junk. If they’d just left the truck like they made back from 1988 to 1989, they’d be fine. The frames and bodies are really good, but the motors are junk.”
“I have a 1989 Ford F-350 with uncountable miles. It still starts well and runs great. It has a 9-ft. box with a hoist. It works great for small loads of dirt.”
“I like my 1997 Ford F-350 dually pickup equipped with a 7.3-liter Power Stroke diesel engine. This pickup is rock solid and simple to operate. I bought it used in 2013, sight unseen, for $5,900 and now it has about 240,000 miles on it. All I’ve replaced are the starter, alternator, and brakes.”
“It has more than 300,000 miles on it but is still going strong,” says Dustin about his “super reliable” 1993 Ford F-350 flatbed pickup. It’s equipped with a 7.3-liter International Harvester IDI diesel engine and manual transmission. “The engine still starts right up. I’m a multi-generational Ford man, and this pickup reinforced that tradition.”
Ed’s the satisfied owner of a Stihl MS 192 TC professional chainsaw equipped with a 16-in. bar. “This saw is reliable and very handy. It starts with one or two pulls even when it’s cold and is easy to operate. The company makes two chainsaw lines - professional models built to last a lifetime, and homeowner models that are only good for occasional use but cost several hundred dollars less.
“I really like my 1996 Ford F-350 pickup equipped with a 7.3-liter diesel engine.”
“My 1997 Ford F-350 pickup has more than 435,000 miles on it but is still going strong. It has gone through one set of fuel injectors and three E40D transmissions. I’m always hauling a load with this pickup, whether it’s on a gooseneck trailer or a flatbed.”
“My 2002 Ford F-350 pickup equipped with a 7.3-liter diesel engine has about 112,000 miles on it. It gets 12 mpg loaded and 16 to 17 mpg empty. The radio has good sound quality and the air conditioner works good. I change the oil on this vehicle every 5,000 miles or so. I had to replace a rear driveshaft seal, but otherwise this pickup has required only routine maintenance.”
On the “worst buy” side, “My 2015 Kawasaki 4010 utility vehicle is smaller than my previous 1999 Kawasaki model. I paid about $11,000 and bought it because I had good luck with the older model and because it came with a 3-year warranty, whereas most manufacturers provide just a 6-mo. warranty. According to the warranty, at 75 hrs. I was supposed to bring the vehicle in to have the valves adjusted. However, I was surprised to find this job was going to cost me $80, and if I didn’t have the work done the warranty would be void. What kind of warranty is that?
“Another problem was that the radiator hose came off due to an improperly installed hose clamp, which allowed air to get into the cooling system. Unfortunately, the water pump is located above the radiator so the vehicle’s front end has to be jacked up 2 ft. off the floor in order to get air out of the cooling system. They wanted to charge me for that repair, too.
“Whenever I need new parts, such as bearings for cutters and plows, I order them from Shoup Mfg. (ph 800 627-6137; www.shoupparts.com). They can save you a lot of money. For example, I was able to buy a starter for an old Deere tractor for $160 whereas Deere charges $400 for the same part.”
“It rides and handles great,” says David about his Ford F-350 longbed pickup equipped with a 6.2-liter gas engine. “Everyone told me to buy a diesel model, but I don’t pull real heavy loads too often so I figured the extra $9,000 wasn’t worth it. I was right. This pickup will pull a trailer loaded with my 10,000-lb. Ford 6610 tractor with ease. It averages 16 mpg.”
On the negative side, “I traded my Ford New Holland 3415 tractor in for a Deere 4005 39 hp diesel model. The New Holland tractor was rated at 38 hp but ran circles around the Deere. I had trouble with the Deere tractor’s hydraulics and fuel injector so I traded it for a New Holland Boomer 45, which I really like.”
A 1996 Ford F-350 pickup equipped with a Powerstroke diesel engine rates as Tom’s “best buy”. “I’ve put about 160,000 miles on this pickup. I use it to haul a 7,000-lb. pulling tractor and for many other jobs. I’ve replaced only the cam sensor and the radiator. I got $200 more than book value when I sold this pickup. It still had the original exhaust system.”
“My 2011 Ford F-350 pickup has about 103,000 miles on it, yet I’ve had to replace only the tires. I’ve pulled a lot of heavy loads with this pickup.
“When I went to trade in my 2012 Polaris Ranger utility vehicle I found that it cost me $1.80 a mile in actual depreciation. Their utility vehicles aren’t built for ranch work.”
Jim nominates his 2011 Deere HPX Gator utility vehicle as his “worst buy”. “The operator’s manual says my Gator has a warning beeper that should come on whenever the parking brake is engaged, but that doesn’t happen. As a result, I had to replace the brakes within the first 2 weeks of use because someone drove the Gator with the parking brake engaged. A company rep said the operator’s manual is in error and refused to install a beeper.
“I’ve had other problems with my Gator, too. For example, I had to replace the gear shifter shaft and the variable drive belt 3 times, and also the steering shaft, CV joints, both front wheel bearings, tie rod bushings, rack and pinion assembly, and starter. I don’t mistreat my equipment, as I own a Deere 4255 tractor with 10,200 hrs. that has required no maintenance other than replacing the seals. I also own a 2004 Ford F-350 truck with about 220,000 miles that has required only routine maintenance. But my Gator, with about 1,600 hrs. on it, has been a constant maintenance headache.”
“It has about 86,000 miles on it but has required only routine maintenance,” says Dan about his 2000 Ford F-250 pickup equipped with a V-10 gas engine. “This pickup has a lot of power and gets about 14 mpg on the highway empty.”
On the “worst buy” side, he lists his 2005 Ford F-350 pickup equipped with a 6.0-liter Powerstroke engine. “This pickup had so many breakdowns that I was afraid to leave town with it. I used it to haul hay and farm-related equipment. The engine blew up 3,000 miles after the warranty expired, and I had to spend $8,000 to replace it with a used engine.”
“The 6.0-liter diesel engine on my 2006 Ford F-350 pickup started causing problems at about 50,000 miles and was replaced under extended warranty at about 87,000 miles. Unfortunately, the replacement engine started having problems at about 38,000 miles.”
Mike nominates his 2011 Ford F-350 dually pickup equipped with a 6.7-liter diesel engine as his “best buy”. “I traded in a 2008 F-350 dually diesel that was a lemon, so it made this pickup look like an engineering masterpiece. The 2008 model came equipped with a 6.4-liter diesel engine and was in the shop 5 times for major problems. It had only about 17,000 miles when I traded it.”
Cody’s the satisfied owner of a 1994 Ford F-350 crewcab, longbed pickup equipped with a 7.3-liter diesel engine and standard transmission. “It runs great with no major problems and gets 15 to 20 mpg, which I think is pretty good.
“My 2005 Chevrolet 3500 Duramax dually pickup is my worst buy. Everything on it that could go wrong did go wrong so it was always in the shop. It gets only 3 to 4 mpg. Now at about 120,000 miles it’s ready for the junkyard.”
“It’s the best diesel pickup I’ve ever owned,” reports Chuck, who bought a used 1997 Ford F-350 pickup equipped with a 7.3-liter Power Stroke diesel engine. “It now has more than 220,000 miles on it but only uses one quart of oil between oil changes. It has a lot of power and torque and gets about 16 mpg.”
“I like my Metabo 6-in. angle grinder with quick connect tool change (ph 877 619-5602; www.cpometabo.com). The wheels are easy to change, and it comes with an electronic soft start that’s easy on the body. This tool fits comfortably in my hands and has a good safety switch. I like it so much that I bought the company’s 4 1/2-in. grinder and a hammer drill, too. All these tools work great. They cost a little more money, but they’ll outlast me.”
On the negative side, he lists his 2008 Ford F-350 dually pickup equipped with a 6.4-liter diesel engine. “I bought this pickup used in 2010 with low miles. The transmission immediately started to shift rough and would ‘hammer’ into gear when turning corners. The dealer said this was normal, part of the fuel efficiency system. The problem would clear for a month or so each time they reprogrammed the computer. Another problem was that the exhaust filter shut down which stalled the pickup on the highway. I’ve owned Fords all my life, but this is the third Ford lemon I’ve had in a row and will be my last.”
“No problems with my 2004 Ford F-350 crewcab pickup equipped with a diesel engine and manual transmission. We love not having an automatic transmission. This pickup hauls whatever we need and the ride is comfortable.
“Our worst buy is ethanol. We live in the boonies so we have to stock up on gas, and in order to store the gas we have to add a conditioner to it. That helps keep the gas stable but if we don’t have a bottle of the conditioner around, the gas goes bad and is only good for burning brush.”
“Our 1985 Ford F-350 pickup had 299,970 miles when we traded it for a 1996 Ford F-250 crewcab model. It has about 258,000 miles and is still going strong. We also own a 2006 Ford F-250 crewcab model with about 10,000 miles on it. These are diesel pickups, and they all run great.”
“I’ve got more than 206,000 miles on my 2001 Ford F-350 crew cab dually 4-WD pickup, which is equipped with a 7.3-liter diesel engine. I use it to pull a 5-horse trailer and farm wagons. I’ve even used it to pull two 350-bu. wagons with a gross weight of more than 57,000 lbs. I had problems with the transmission at about 90,000 miles, but I’ve abused the pickup regularly since then and it has held up well. The pickup still uses only a half pint of oil between changes.
“I’ve got more than 150,000 miles on my 1998 Sooner 5 horse trailer equipped with living quarters. My main complaint is with the trailer’s aluminum window frames and side compartment doors, which started pitting after about 4 years. I complained to the company but they referred me to their supplier instead of standing by their product. Of course, by the time I got around to doing something about it the warranty had expired. Also, the rear door hinges are poorly designed and had to be replaced.”
Paul’s had problems with his 2006 Ford F-350 pickup equipped with a 6.0-liter diesel engine. “I bought this pickup in August 2007. Since then it has left me stranded on the side of the road at least twice a year. Sometimes I was pulling a trailer, and sometimes I was out of town on vacation. Fortunately, I had bought an extended bumper-to-bumper warranty or I’d have spent about $24,000 on repairs.
“The last time the pickup broke down, the extended warranty had expired by just 400 miles and the company wanted $900 to replace the fuel injection control module. I was so mad I called Ford’s corporate office, but they told me to call the Better Business Bureau. So I had the pickup towed away and swore not to spend another penny on it.”
Tom’s impressed with his 1996 Ford F-350 pickup equipped with a Powerstroke turbocharged diesel engine. “I bought this pickup new and had a Fisher ‘minute mount’ snowplow mounted on it. With good snow tires and 700 lbs. of sand in back, I have no trouble plowing snow uphill. It has about 157,000 miles on it and is an excellent pickup.
“As far as worst buys go, I’ve been fixing chainsaws for a living for 42 years and have found that the customer is the problem at least 75 percent of the time.”
“Five years ago we paid $850 for a used 1984 Ford F-350 pickup equipped with an 11-ft. flatbed. We used the pickup for two years to haul four tons of sand for our sandblasting outfit across a 3-state area. Since then, this pickup has made countless trips out of our woods, loaded with firewood. The pickup is equipped with an-line, 6-cyl. engine and 4-speed transmission. It has required only routine maintenance and doesn’t use any oil.
“It’s old enough to vote and is really ugly. But I figure that for every four loads of wood that it hauls, it pays for itself one more time. I’ve put almost 30,000 miles on it.”
“My1979 Ford F-350 pickup is a worst buy. One year when I was in Florida and driving home to New Hampshire the pickup had ignition problems. I ended up spending quite a bit of money buying coils and ignition boxes when the real problem was with the coil wire. Also, I went to 3 different garages and paid them for their labor without getting the problem solved.”
“My 2004 Ford F-350 diesel pickup is my worst buy. An engine rod went through the side at about 11,000 miles, the transmission had to be replaced at about 29,000 miles, and the turbo changed at 43,936 miles. The truck quit running on the highway at 44,200 miles, and the high pressure oil pump had to be replaced. This pickup had to go back to the dealer more than 10 times in three years. Finally I traded it for a 2008 Ford F-250 diesel model. No problems so far.”
“My 1973 Ford F-350 pickup is my best buy. The pickup came equipped with a 390 cu. in. engine and a heavy duty transmission, cooling system, and towing package. The engine has been overhauled once and the heads twice; and the starter has been replaced once; the water pump twice; and the alternator twice. It has been painted twice, the second time because of a sloppy paint job the first time.
“Some of the many features I like about this truck it that it doesn’t have a lot of unnecessary electrical equipment. I have to unlock the doors with a key, lower the windows with a crank, turn the lights on/off with a pullout/push-in switch, and manually adjust the seats.
“I paid $5,050 for the pickup and have spent less than $5,000 keeping it going.”
“I bought my 1999 Vermeer 1250 BC wood chipper used with about 1,000 hours on it. It’s my best buy. No problems with the motor or grinder. It’s a good machine.
“My 1980 Ford F-350 pickup is a real lemon. Instead of riding in comfort, you get the daylights shaken out of you. The doors rattle like a lumber wagon. It’s not like back in the 1973 to 1979 era, when the Ford F-250 XLTs and F-350’s had class and a comfortable ride.”
A 2005 Ford F-350 pickup rates as Roger’s “best buy”. “This pickup has been a joy to own and has plenty of power for any job. It has more than 9,000 miles on it with no problems. I use a Butler electric-over-hydraulic flatbed bale carrier on it, which works great.”
“My 2004 Ford F-350 pickup equipped with a PowerStroke engine is my worst buy. At just 3,100 miles the turbocharger failed, resulting in a long stay at the dealer. At 6,900 miles the turbocharger failed again. The dealer was uncooperative, and calls to the company produced no results. The pickup was in the shop for several weeks.”
“My 2000 Ford F-350 crew cab 4-WD pickup equipped with a Power Stroke diesel engine and automatic transmission is my best buy. I bought it used with about 29,000 miles on it. It pulls everything I load onto it and has required only routine maintenance.”
“My 2000 Volkswagen Jetta has provided reliable service and gets up to 53 mpg. If just half the drivers in the U.S. switched to more fuel efficient vehicles, fuel prices would drop like a rock.”
On the minus side, he lists his 2003 Ford F-350 pickup equipped with a 6-liter diesel engine. “It has spent a lot of hours at two different Ford dealers due to problems with a leaky air conditioner, an EGR valve, the clutch pedal, hydraulic system, and other issues. It isn’t very fuel efficient even when driving at low engine rpm’s.”
Richard is disappointed with his 2003 Ford F-350 extended cab, longbed 4-WD pickup. It’s equipped with a 6.0-liter diesel engine and a 5-speed automatic transmission. “The problem is that it isn’t very fuel efficient. I can drive it at 70 miles per hour with the engine running at 2,000 rpm’s, but it still won’t average more than 17 mpg. It has about 12,000 miles on it, with about half of those miles on the freeway and without pulling a load. My 1990 heavy duty Dodge 250 4-WD pickup has about 150,000 miles on it but still gets more than 20 miles per gallon.”
A 2001 Caterpillar 236 skid loader rates as Gene’s “best buy.” “It runs smooth and has plenty of power for doing small jobs. If it ever gets overloaded it diverts hydraulic pressure to avoid damaging the machine.
“I bought a used 1999 Ford F-350 crew cab pickup with 353,000 miles. I’ve put about 10,000 miles on it and it hasn’t used any oil.
“My 1997 Daewoo DSL 801 skid loader is my worst buy. It’s not a bad machine in most respects, but there’s absolutely no dealer support or parts availability. I replaced it with a Caterpillar 236 skid loader and am pleased with it.”
“I bought a used Yanmar 1500 4-WD tractor equipped with a diesel engine. The engine now has about 3,000 hours on it but has never been touched. The tractor is a best buy in every way.
“My 1993 Ford F-350 pickup equipped with a diesel engine is my worst buy. A pinhole developed in the engine’s no. 3 cylinder wall and burned a valve only one year after repairs were made to it. The pickup has about 222,000 miles on it.”
“My 2002 Deere 8520 tractor is my best buy. We had been farming only Case tractors until we decided to try Deere. I like it so much that I’d never go back to Case.
“My 2003 Ford F-350 pickup equipped with a V-8 turbocharged diesel engine is my worst buy. After two months the engine blew up. We have a 1986 Chevrolet 1-ton pickup and haven’t had any problems with it. It goes to show you which brand is on top.”
“Our 1997 Ford F-350 pickup equipped with a Power Stroke diesel engine is our worst buy. We bought it used in 2001 and have had nothing but trouble ever since. At 30,000 miles it needed new rear brakes. Last year we had to replace the rear brakes again as well as a new rear end and universal joints. At about 60,000 miles the starter had to be replaced and it needed new rear universal joints again. Last January the universal joints had to be replaced yet again, and last March the starter again went bad after only six months of use.
“The door handles are made of plastic and break off easily. We removed the door panels and found that the door latches are bolted onto tin, which was all cracked. The best part of the truck is the Power Stroke diesel engine.”
“My 2003 Ford F-350 pickup equipped with a Power Stroke diesel engine is my best buy. I really enjoy driving it because it has immense pulling power and a comfortable ride. My 2003 Pequea trailer is a perfect match for this pickup, and its extreme maneuverability helps in tight places. I use the trailer to haul a pair of wide front-end antique tractors.”
“My Ford F-350 pickup equipped with a 6-liter Power Stroke diesel engine and 5-speed torqshift transmission is my best buy. It has a lot of power and the transmission is geared low, so it works great for pulling heavy loads. I’d recommend this pickup to anyone looking for a real work truck.”
“I like my 2000 Ford F-350 pickup equipped with a V-10 gas engine. It has a lot of power and is fuel efficient for its size. In fact, it’s easier on fuel than the Power Stroke diesel engines in other pickups I’ve used in the past.”
“One of my best buys ever was my 1997 Ford F-350 pickup equipped with a Power Stroke diesel engine. I put more than 87,000 miles on it without any problems. It was a great pickup with a great engine. Six months ago I traded for a 2001 GM 3/4-ton pickup equipped with the new Duramax engine. I’m well satisfied with it. It gets more than 18 1/2 mpg in town and more than 20 mpg on the highway.
“My 1995 Sears Kenmore oven is a worst buy. The problem is that the burners don’t work right. We’ve had to replace them many times. In addition, the oven doesn’t heat accurately.”
“It’s the most powerful and economical pickup I’ve ever owned,” says Rick about his 1996 Ford F-350 crew cab 4-WD pickup. It’s equipped with a turbocharged diesel engine and 5-speed transmission. “It averages 17 mpg and can get up to 20 mpg. I owned a 1989 Ford F-250 equipped with a diesel engine that had no turbocharger, and it had far less power than this model. The only thing I don’t like about this truck is that it’s fitted with Firestone tires. We had four or five flat tires during the first 16,000 miles alone.”
“My 1979 Ford F-350 pickup has more than 240,000 miles on it and is my best buy. I’ve used it to pull a gooseneck stock trailer and to slip a sprayer on the bed so I could spray corn and alfalfa. I also use it for day-to-day chores around the farm. We repowered it with a 460 cu. in. engine. Now it has a lot of power but isn’t real fuel efficient. We made our own flatbed after the original one rusted out. It works good.”
Vern nominates his 1997 Ford F-350 pickup equipped with a Powerstroke diesel engine as his “best buy”. “It has an excellent ride, a lot of power, and is easy on fuel. This is the first pickup we’ve had with an automatic transmission. We sure like it.”
Ted likes his 1991 Krone 130 round baler. “I bought it used five years ago with one season of use on it. I’ve used it to put up 300 tons of hay each summer and have had almost no problems. It’s chain-operated so there are no belts to wear out or stretch. This baler has turned my haying work into a one-man operation.”
On the minus side, he lists his 1989 Ford F-350 pickup equipped with a diesel engine and manual transmission. “I bought it used with 100,000 miles on it. Before I had put on 10,000 miles I had to replace the clutch, which wasn’t unexpected except for that ‘wonderful’ flywheel they designed. I also don’t like the interior. I’m a rancher. Stuff belongs on the dashboard, but on this pickup it won’t stay there – there’s no interior storage. It’s a big truck but only a man and a dog can sit in it.”
He says a 1988 Ford F-350 pickup with a 7.3-liter diesel engine was his “worst buy” ever. “The company spent more than $50,000 doing warranty work on this pickup but still they wouldn’t take it back. Instead they just keep fixing it over and over and over. Luckily I had an extended warranty policy so all the repair work was covered except for a $25 deductable.”
“It has a lot of power and starts right up in cold weather,” says Larry about his 1996 Ford F-350 crew cab 4-WD pickup equipped with a Power Stroke engine and automatic transmission. “It rides good for a 1-ton pickup. Fuel economy is okay.”
Roy, who bought a new tractor equipped with 42-in. Armstrong radial tires on back, says they’re his “worst buy”. “After 2 1/2 years and with less than 1,000 hours on the tires I began to have flats. The problem was that the sidewalls were wearing holes in the tubes. After spending more than $300 on tire repairs during a 4-month period, we removed the tubes and fluid and mounted the tires without tubes. This worked for about 30 hours, but then the tires began leaking air out the sidewalls. My tire man says he has seen this problem with Armstrong tires before. After spending more than $450 on service calls I replaced the tires with another brand. If I ever buy another tractor it won’t have Armstrong tires on it.
“My Donahue 16-ft. tandem grain trailer is my best buy. It’s built with quality and has replaced two old farm trucks for hauling our grain to market. We use our 1994 Ford F-350 pickup equipped with a 7.3-liter diesel engine to pull the trailer. It can easily pull the trailer when it’s loaded with 300 bu. of wheat. The pickup is also a best buy.”
Norman’s disappointed with his AGCOAllis 5670 front wheel assist tractor equipped with a 63 hp engine and front-end loader. “It broke down with less than an hour on it when the rubber fuel line collapsed. After that the tractor broke down more than 20 times due to rubber fragments in the fuel system. Both the dealer and the company were willing to repair it each time we had a breakdown, rather than taking it apart and solving the problem permanently. After the tractor had 60 hours I demanded my money back.“
“My 1997 Ford F-350 pickup equipped with a Power Stroke diesel engine works good.”
“”MyShaver post driver has defects in the hydraulic leveling system that the company either will not or can not correct. The problem is with the quality of the Gresen valve -the company finally had to take it back.”
“We bought our 1996 Ford F-350 pickup last spring. It already has more than 65,000 trouble-free miles on it. I’m still driving a Ford F-250 pickup equipped with a 390 cu. in. engine that I bought 23 years ago. It still runs great and isn’t all rusted out like Chevy and GM models would be by now. “My worst buys are Goodyear tractor tires. They crack and fall apart before the tread is even worn down. Maybe they hold up better in other areas that have different soil types than ours.”
Mark’s impressed with his 1995 Ford F-350 pickup equipped with a power stroke diesel engine. “It runs well, gets 17 to 20 mpg, and has enough power to pull my trailers. I’ve put more than 40,000 miles on it with no problems. It sits outside sometimes in the winter but always starts. “My worst buy is my 1993 Polaris 350 ATV. The engine backfires and blows the muffler off whenever I let up on the throttle. It’s also hard on fuel. I had to bore out the engine with only 500 miles on it.”
He nominates his 1996 Ford F-350 crew cab pickup equipped with a Power Stroke diesel engine as his “best buy”. “It rides good and gets 15 to 22 mpg. No problems after 25,000 miles. “I really like my 1996 Deere 325 lawn tractor. It’s powered by an air-cooled 17 hp engine that works great. No problems.”
“I bought my 1983 Ford F-350 pickup used with 60,000 miles. It has more than 215,000 miles on it now and is still going strong. “I’m also impressed with the 1978 Ford 3/4-ton 4-WD pickup that I bought used. It has more than 170,000 miles on it.”
Ken nominates his 1994 Case-IH 7210 front wheel assist tractor as his “best buy”. “It pulls well for its size and has well-positioned controls, especially the 3-pt. hitch controls. However, I’ve had problems with leaking front wheel seals. “My 1990 Ford F-350 dually pickup equipped with a diesel engine has about 200,000 miles on it and has worked well except for some minor electrical problems with the lights and gauges, etc. Also, some paint is peeling off.”
“I like my 1995 Ford F-350 extended body van equipped with a diesel engine. It’s easy on fuel, rides comfortably, and accelerates well. The extended body provides a lot of room for bagged feed.”
Harold nominates his 1995 Ford F-350 extended cab 4-WD diesel pickup as his “best buy”. “It rides smooth and drives great. It also has a lot of power.”
“It rides and drives great, has a lot of power, and gets 19 to 20 mpg,” reports Mark, pleased with his 1992 Ford F-350 extended cab pickup equipped with a 7.3-liter diesel engine and 5-speed transmission. “We had problems with the brakes at 128,000 miles. Otherwise it has required only routine maintenance. It now has 137,000 miles on it. “OurJCB 210SL front-end loader is the handiest piece of equipment on our farm. It gets around fine in the mud and turns short. It also has a lot of lifting power. “Our worst buy is my 1994 Chevrolet 1/2-ton extended cab pickup. We thought it would be a good vehicle for running to town for parts, but it gets only 10 mpg which means we spend a lot on fuel. It doesn’t have a lot of power and the 4-WD seems to work only when we don’t need it. I’ll never buy another Chevrolet. I don’t know why the company calls it a truck when it’s not even a real pickup.”
“It’s fuel efficient, rides great, and has a lot of power,” reports Tim, pleased with his 1995 Ford F-350 crew cab pickup equipped with a 7.3-liter powerstroke diesel engine. “We use it to pull a fifth wheel trailer with 14,000 lbs. on it and it handles it great.”
Alton Lerwick, Lyman, Neb.: “My worst buy is my 1990 Ford F-350 4-WD pickup equipped with a 7.3-liter diesel engine. It has 58,000 miles on it. The trouble began when the clutch went out at about 20,000 miles. The company said that was ‘normal wear and tear’ and wouldn't cover it under their 60,000 mile drivetrain warranty. Since then the clutch has gone out again, the clutch master cylinder has been replaced twice, and the power steering has been repaired three times. It’s gone through three starters, four alternators, and five sets of batteries and the transfer case has been rebuilt three times. The rear seals leaked and ruined the rear brakes, The radiator fins are so close together that nothing can pass through them. As a result, the screen plugs up and has to be removed and cleaned on a regular basis, The pickup frame broke on one side and now paint is peeling off the hood. I’m a real skeptic whenever I see Fords advertised as ‘Ford tough,’ “My Deere 535 round baler is reliable. The bales start easy and are solid.”
John Wayne Nagy, Hempstead, Texas: The “most perfect truck ever built,” John says, is the 199] Ford F-350 dually pickup equipped with 7.3 liter diesel engine and automatic transmission with overdrive. “T've put 100,000 miles on it and have only had to replace one power door lock. I got 70,000 miles out of the first set of tires. I can get 10 mpg pulling 12,000 to 15,000 Ibs. and 20 mpg on the highway.”
Gary Bruning, Ellsworth, Kan.: Gary's disappointed with his 1991 Ford F-350 4WD equipped with 7.3 liter diesel engine as compared with the 1984 Ford F-250 4WD. “Mileage isn’t nearly as good as with my ‘84, which had a 6.9 liter diesel. It's doggy and doesn’t start as easily when it's cold either,” Al Plumleg, Crown Point, Ind. “I'm absolutely 100 percent satisfied with my 1994 GM Sierra Z-71 4-WD with extended cab. It's roomy, powerful enough to haul big loads, and looks great. Plus, the dealer has been pretty good about service. I bought it 13 months ago and have put 42,000 miles on it. It hasn't missed a day of work.”
Earl K. Bankston, Natalbany, La.: Earl likes his 1991 Ford F-350 pickup but doesn’t like an on-going problem with the paint. “It was only two years old when the paint peeled off the top and one fender. I felt Ford should have repainted it but the company refused because the warranty had expired.”
C. Sherman Allen, Conneaut Lake, Pa.: He’s had a problem with the 1993 Ford F-350 equipped with 7.3 liter diesel “Tt was only two years old when the paint peeled off the top and one fender.” engine and 5-speed transmission he bought new - and the extended service plan he bought for $1,545. He's contacted the Ford Motor Company of Ohio, his local Better Business Bureau, and the Pennsylvania attorney general's office about it. “The problem was that last May, a rod that fastens to the clutch pedal broke. I soon discovered that the part could not be purchased separately, but only with the clutch hydraulic sleeve cylinder and reservoir. And the repair was not covered by my extended service plan, “First, this is utterly ridiculous to have to pay $65.48 or more when all I need is this rod. Also, the part did not wear out, it suddenly broke into three pieces, which could be a safety concern for Ford since owners might not be able to stop their trucks in time if this rod breaks. Why isn’t . this repair covered under my extended war) ranty program?”
Fred Schrader, W. Lafayette, Ind.: Fred's 1986 Ford F-350 Dually, equipped with a 6.9 liter diesel engine, is his best buy. “It's the most reliable vehicle I’ve ever owned. It has 140,000 miles on it and it appears it will do that a couple of more times, I'm anxious to see just how long it will last.”
Eric Angus, Kersey LDS Farms, La Salle, Colo.: Eric bought his “best buy” 1991 Ford 8830 front wheel assist tractor to replace a 1989 Deere 4455, “It’s had very few problems and the powershift transmission is the best on the market. It has a lot of power and a comfortable cab. It’s also fuel efficient. I liked it so well I also bought a 1992 Ford 8730 and a 1993 Ford 7740, Both tractors have front wheel assist.” Sam Scarlett, New Market, Tenn.: Sam nominates his 1992 Henke 2309 TMR mixer-wagon as his “best buy”. “I like it because we can mix more long hay with it, The wagon we had before could handle only about 2 Ibs. of hay per cow, but this one can handle 5 or more Ibs. “My Ford F-350 dually diesel pickup is my worst buy. The Firestone tires in front were “out of round’ and my dealer couldn't find out what was wrong. We took it to a private company that found the problem and fixed it. The dealer paid for it.”
Sam Scarlett, New Market, Tenn.: Sam nominates his 1992 Henke 2309 TMR mixer-wagon as his “best buy”. “I like it because we can mix more long hay with it, The wagon we had before could handle only about 2 Ibs. of hay per cow, but this one can handle 5 or more Ibs. “My Ford F-350 dually diesel pickup is my worst buy. The Firestone tires in front were “out of round’ and my dealer couldn't find out what was wrong. We took it to a private company that found the problem and fixed it. The dealer paid for it.”
Wayne Manthey, Big Bend, Wis.: Wayne likes his 1987 Ford F-350 4-WD diesel pickup. “I bought it used in 1989 with 32,000 miles. It now has 169,000 miles with only minor repairs. It still looks good and gets 15 to 20 mpg. It’s the best truck I’ve ever owned. “Our 1993 Great Plains 10-ft. no-till drill pulls and handles much easier than I expected. The seed metering system is accurate and adjustments are simple to rst Buys us page) tors. “I buy Ford tractors because they don't have any repair bills. That saves me a lot of money.”
Ray Brown, Goderich, Ontario: “My 1993 Crary Air Reel does an excellent job. Itkeeps the header table clean and keepscut plants and shattered grain from falling off. I wish I had bought it years ago.” On the “worst buy” side, Ray lists his 1989 Ford F-350 1-ton diesel pickup. “The engine is the only good thing on this truck. The paint peeled off, we replaced two power steering pumps, the rear axle seals wentout, the brakes seized, and I had to put in a new radiator. The pickup has less than 60,000 miles on it. The radio plays well only when I open the door.”
Steve Schiedel, Mt. Hope, Ontario: “My Bauer irrigation reel works well and is a best buy. “My 1986 Ford F-350 pickup has constant hydraulic clutch problems, We have to fix the clutch every 125 miles or so.”
James Walsh, Merrimac, Mass.: James is happy with his 1987 Ford F-350 equipped with a 460 cu. in. engine, but says he had to replace the hydraulic clutch at 17,000 miles ata cost of $900. “My 1982 Ford F-350 pickup equipped with a 400 cu. in. engine has 132,000 miles and has had only three oil changes (synthetic oil) and two sets of plugs. Itruns fine. I use it to pull a 24-ft. wailer and it still has the original clutch.”
Gene Nance, Chesapeake, Ohio: Gene says his “best buy” is the Banks Engineering turbocharger kithe installed on his 1985 Ford F-350 pickup equipped with a6.9-liter diesel engine (Gale Banks Engincering, 546 Duggan Ave., Azusa, Cal. 91702 ph 818 “It has so much more pulling power now that I wouldn't believe it if I hadn't tried it myself.” 969-9605). “It has so much more pulling power now that I wouldn't believe it if I hadn't tried it myself. On hills where I used to shift to second or third gear pulling 30,000 to 40,000 gross weight, now top at 55 to 60 mph in fourth gear. “The Ford F-350 is great, too. It has 94,000 miles and the only repair other than normal maintenance was to the water pump at 87,000 miles.” Gene’s “worst buy” is his 1989 Gehl 160 disc mower. “The shear pin that allows the cutter bar to break away is located so that you have to remove a shield covering the belts to gettoit. It's abouta 30-min, job. The mower is also hard to adjust and it leaves streaks between the discs when cutting in heavy hay.”
Tom Wilson, Killbuck, Ohio: Tom's had trouble with his 1987 Ford F-350 pickup equipped with a dump bed and a 3:55 rear end ratio. “The rear end ratio is geared too high. It works great for tumpike driving, but not for hauling heavy loads. The first time I got into a soft spot with a load on I couldn’t even beck up. Aftercalling for months to the regional offices and to Detroit, the company finally agreed that a 4:10 ratio would work better and installed one at their expense. The new ratio has helped tremendously.”
Stanley Crone, Danville, Penn.: “Itdoes a good job in both no-till and conventional till and is very easy to adjust,” says Stanley, pleased owner of a 1990 Deere 7200 corm planter. “I don’t have a worst buy, but my negalive gripe are the metric bolts and nuts on my Deere 7200 corm planter, Deere 1460 disc hay cutter,and 1989 Ford F-350 pickup. I need another complete set of tools, bolts, and nuts just to keep this equipment running. I think we should boycott companics that use metric in this country.”
V. Brandon, New Kirk, Okla.: “My 1986 Ford F-350 diesel 6,9-liter pickup isa worst buy. It’s had a new heater core, front end, engine, water pump, injector pump, throw-out bearing and clutch changeover kit, and new clutches in the limited slip differential. At 10,000 miles it was using a quart of oil every 500 miles. The company reworked the heads to solve the problem, At 25,000 miles the oil cooler leaked antifreeze and ruined the engine which was replaced, The new engine had less than 25,000 miles on it when its rocker arms had to be replaced. Oil tests show the new engine wears three times as fastas the original engine, Ford and the local dealer have tried lo repair everything, but fora pickup that’s well cared for it’s quite a disappoinument. The $1,000 I spent on a 5-year unlimited mileage warranty was money well spent.”
Michael Comstock, Kenton, Ohio: “A 1986 Ford F-350 Dually 4-WD 6.9 diesel pickup heads Michael's “worst buy” list. “This pickup is a piece of junk! The master cylinder completely broke off the firewall three times, and the front end shimmies so bad the truck goes all over the road. We had it in two different shops on three different occasions, replacing two sets of shocks and Stabilizer bars and other steering parts, as well as three sets of Goodyear Wrangler radial tires. We also replaced three light switches, one transfer case, three speedometers, three oil pressure sending units, one glow plug unit, one slave cylinder, one master cylinder, one clutch, three sets of brakes, and one set of emergency brakes. Last year we spent more than $3,000 on repairs, not including the cost of the tires. The warranty seems to cover all parts except those that break. The diesel engine pulls great in low range but has no power at higher speeds - you need a mile and a half of clear highway to pass someone. And if you're driving into a head wind, forget it.” Michael’s “best buy” is his 1976 GMC Sierra Grande 25 3/4-ton 4-WD pickup equipped with a 400 cu. in. engine. “This truck has taken severe abuse but caused us few problems, Without a doubt, it’s the best truck we've ever owned. It’s now semi1inate sUYyS retired and is basically a show truck, but we still use it on the farm whenever necessary." Ivan Bruder, Sauk Centre, Minn.; “My 1970 Chevrolet 3/4-ton pickup up has 476,460 miles and should easily reacha half million miles,” says Ivan, who notes thatthe pickup is now on its fifth set of tires, It’s equipped with a 350 V-8 engine and automatic transmission. “When hauling grain I load the pickup and pull two gravity boxes. I change oil every 1,500 to 2,000 miles and it’s paid off because the original engine went 187,000 miles and the present engine went 285,000 miles before it needed a valve job and rings. The engine still maintains normal oil pressure but it does use a lot of gas, getting only 12 to 13 mpg when it’s empty.” .
Kent Palmer, Bennett, Neb.: “This is the ultimate truck,” says Kent about his 1989 Ford F-350 diesel pickup equipped with 5-speed transmission and a 445 cu. in., 7.3-liter engine. On the “worst buy” side, “Our MeCullough transfer pump was a piece of junk from the start, It wouldn't run even after I spent more than $80 on repairs. I sold it * through aneighbor’s farm saleand it brought $12. I had paid over $150 for it.”
Jim Missler, Bellevue, Ohio: A 4-WD 1987 Ford F350 1-ton pickup, equipped with a351 V-8 engine and 4-barrel carburetor, is Jim’s “best buy”. “It rides well, pulls good in low range, has a quiet cab and a comfortable seat. I like the full size bed and dual fuel tank option. The spring bumper I installed, with movable hitch for easy hookup, is a really worthwhile addition.” (P & H Mfg. Co., 604 S. Lodge, Shelbyville, Ill. 62565 (ph 217 774-2123).
Dave Neiding, Berlin Heights, Ohio: “The cab on my 1986 Ford F-350 pickup is as quietas some cars I've ridden in, The 460 cu. in. engine has plenty of power, fucl economy is excellent and the truck handles well under even the worst weather conditions.”
Coon Rapids, Iowa: “My 1983 Ford F-350 with 6.9 liter diesel engine has great power and good fuel economy. Gets 13.5 mpg pulling a loaded trailer. Don Ritzschke, Goldendale, Wash.: “My 1982 A.M.C, Eagle 4-WD sedan is the best car I ever drove, It gets 20 mpg and now has more than 60,000 miles on and hasn’thad any problems. On slick roads itholds the road so well it's like driving on dry ground.”
Lynn S. Loos, Baylis, Ill: “I keep hoping a tree will fall on it,’’ says Lynn, upset with her “worst buy” 1980 Ford F350 one-ton 4-WD pickup with Pos-Trac rear-end and automatic transmission. ‘‘We have a 300 bu. gooseneck trailer that we used to pull easily with our 1979 Ford 250 % ton. This one-ton can hardly pull it empty. The truck is lighter by 25% than the 1979 model and gets awful gas mileage at 5.2 mpg.’ On the plus side, she’s happy with her Deere 653 row crop head. “We rented this bean head because we had 523 acres of beans to cutand our grain platform is getting old. Because of the drought, our beans were short but this head gets them all. It eats through weeds like they're not even there.” Charles Storm, Mt. NEROM, Ss. Dak.: ““My Mix Mill e : feed grinder is my best buy,” says sCharles ; “T bought it three years ago and since that time it has performed great. Other than replacing hammers and screens, it has never required repair and we use it almost every day. Once calibrated, it records the amount of feed used for each ration.” i nieces Ee linate Sse has any problems whatsoever. No rattles, no wind noise and get 22 to 24 mph on this magnificent fully-equipped luxury car,"’ says Joseph, pleased with his 1983 Mercury Grand Marquis.
Ford F-250 4-WD crew cab pickup
46 Best Buys17 Worst BuysEli owns a 2001 Ford F-250 4-WD crew cab pickup with more than 400,000 miles on it that’s still going strong. It’s equipped with a 7.3-liter diesel engine. “I installed a new transmission at 396,000 miles, which is the only major repair it has needed. It’s a good, dependable pickup.”
On the “worst buy” side, he lists his 2014 Dodge Ram 3500 DRW 4-WD, crew cab pickup equipped with a Cummins diesel engine. “Although this was a 2014 model, it was put together with a lot of leftover 2013 parts. I had to take it back to the dealer 5 or 6 times for factory recalls. Then after the warranty expired this pickup just nickeled and dimed me to death so I finally sold it. I took a beating on it, but lesson learned.”
“I bought a new Stihl 034 AV chainsaw in 1984 while the saw was still made in West Germany. I’ve used this saw every year since then to cut firewood, averaging 6 cords a year, and to cut posts around our farm. It still runs like new and has plenty of power.
“We used our 1988 Ford F-250 4-WD pickup every day for 26 years until road salt finally rusted the frame away. Best work truck we ever had.
“My wife still drives her 1994 Chevrolet Silverado 1/2-ton, 4-WD pickup every day.”
Roger nominates his 2007 Bad Boy 60-in. zero turn riding mower as his “best buy”. “It’s well-built with a sturdy deck and great steering system, and everything on it is easy to service.
“My 1996 Ford F-250 4-WD extended cab pickup equipped with a 7.3-liter diesel engine has more than 335,000 miles on it, but it’s still going strong.”
“I’m well-pleased with my 2012 Ford F-250 4-WD single cab Super Duty pickup. It replaced my 1998 F-250 model which had almost 200,000 miles on it.”
“I like my 2013 Ford F-250 4-WD pickup equipped with a 6.2-liter gas engine. It handles well and has plenty of power. It gets about 14 mpg driving locally.”
“I bought my 2002 Ford F-250 4-WD diesel pickup used with only about 65,000 miles on it. It starts and runs great with no problems. I’ve used this pickup to haul several 1-ton loads and it still gets 17 mpg. It doesn’t seem to matter how much I put in the pickup or tow behind it.”
“My 2004 Ford F-250 4-WD pickup equipped with a 6.0-liter Powerstroke engine is a true workhorse, with more than 230,000 miles on it. It has needed only a couple of trips back to the dealer for minor repairs.
“My 2006 Ford Escape has about 176,000 miles with only routine maintenance.”
He’s disappointed with his two Echo straight shaft weedeaters and an Echo gas-powered blower. “I can’t even go one year using these products without some kind of problem. And trying to deal with Home Depot on warranty work is a whole story in itself.”
“It’s the best pickup I’ve ever owned,” says Brad about his 1996 Ford F-250 4-WD model equipped with a 460 cu. in. gas engine and automatic transmission. “This pickup consistently gets 12 mpg, but it’ll haul anything I need anywhere I want.
“My Harbor Freight infrared driveway motion sensor works only sporadically, with about 3/4 of all alarms being ‘false positives’. I should’ve known anything marked ‘clearance’ at Harbor Freight wasn’t going to be up to snuff.”
“I bought a 1999 Ford F-250 4-WD pickup used with about 140,000 miles on it. Today it has more than 240,000 miles and is still going strong. It’s a pleasure to drive, equipped with a 7.3-liter Powerstroke diesel engine and 6-speed manual transmission. Plenty of power to pull a 24-ft. gooseneck livestock trailer. It gets 16 mpg.
“My 2006 Claas 250 RC round baler uses 17 rollers to make the bale, and all the baler’s chain-driven sprockets are secured to the rollers with gib keys. It’s a good baler for making high moisture haylage, but several of the rollers failed after the gib keys fell out and the sprockets free-wheeled on the shafts, destroying 4 of them. Everything was behind shields so there was no evidence anything was wrong until the shafts broke off and the rollers stopped turning. The company said they had never seen this problem before. Of course, it happened just after the warranty expired.
“We took the four rollers with damaged shafts to a local machine shop which replaced the shafts. The sprockets were also replaced with new centers using taper-lock hubs. It’s a much better system than Claas’s gib key setup.
“The baler requires a tractor with a minimum of 90 hp. Our baler came equipped with a pto driveline rated at 60 hp and 540 rpm’s, and it failed after just two years. The dealer replaced the driveline at his expense even though the machine was out of warranty.”
“My 2007 Atchison 12-bale hay trailer is well built. It rides on tandem dual wheels and can handle twelve 1,400-lb. round bales with ease. I use a 3/4-ton pickup to pull it across all types of terrain with ease. It self-dumps the bales and is simple to operate.
“My 821 Ford diesel tractor is a real stud when working in hay fields. I use it with a 42-ft. Rowse dump rake. No problems. It’s also fuel-efficient.
“I’ve had problems with my 1993 Ford F-250 4-WD pickup. I have to replace the slave cylinder on the hydraulic clutch almost every fall when the first cold weather arrives. I quit counting after I replaced 13 cylinders. Also, the body material on it is inferior. The pickup has less than 70,000 miles on it.”
“The 2005 Ford F-250 4-WD pickup I bought used is my best buy. I use it as a farm/ranch vehicle, and my daughter uses it to go to horse shows, pulling a 4-horse trailer. Her tack alone weighs as much as two quarter horses. We’ve used this pickup to haul gravel, hay, and sawdust. It’s a good pulling pickup, loaded or empty.
“In 1980 I bought a used 1953 Ford Golden Jubilee tractor and have used it for pushing snow, leveling dirt, and baling hay ever since I replaced the tires and a clutch.”
“My 2004 Volkswagen Golf TDI-equipped with a diesel engine and 5-speed transmission gets 42 to 50 mpg. It has about 98,000 miles on it with no problems.
“Two years ago I bought a used 1995 Ford F-350 4-WD dump truck equipped with a 7.3-liter diesel engine with about 70,000 miles on it. It’s a sharp looking truck with a lot of power. A great buy.
“My 1995 Ford F-250 4-WD extended cab pickup started using oil at 35,000 miles. It gets only 9 to 11 mpg, and less when pulling a trailer. Also, the front end requires a lot of maintenance.”
Dale nominates his 1992 Ford F-250 4-WD pickup equipped with a 7.0-liter engine as his “best buy”. “It has more than 201,000 miles and has required only routine maintenance. I have the truck set up for towing with a hideaway gooseneck, fifth wheel hitch, and bumper hitch. This pickup never fails to do the job.”
“I like my Hitachi 12-in. compound sliding miter saw equipped with a digital readout. I had owned an American brand, but it had a defect so I returned it to the dealer and got the Hitachi. It has a lot of power for cutting at maximum depth, and the angle adjustments are easy to make. The digital readout is handy for making small adjustments.
“My 2006 Ford F-250 4-WD pickup equipped with a 6-liter diesel engine rates as my worst buy. The engine developed a bad hesitation if I tried to pull out too fast. I took the pickup back to the dealer several times for reprogramming. It works better now but still has slight delays. It gets 10 to 12 mpg pulling a trailer, which I don’t think is very good. I do like how this pickup rides, and the seats are comfortable.
“When the pickup was new I had a Scor-pion bed liner applied, which turned out to be a waste of money. The bed liner wasn’t applied as heavily as it should have been. As a result, things slide around on it and the bed liner material easily peels off.”
“It’s one of my best buys ever,” says Greg about his 2004 Montana 4540 compact tractor. “We use it with a 72-in. mower, box blade, front-end loader, and to pull an 18-ft. trailer. It has far surpassed my expectations for quality and price. It was well worth the trip I made to Texas to buy it.
“My 1986 Ford F-250 4-WD extended cab diesel pickup equipped with an 8-ft. bed is a best buy. We’ve used it to haul firewood in our commercial business, to tow a 24-ft. camping trailer, and to make many trips into town. I installed a Banks Sidewinder Turbo on the engine about 10 years ago. The turbo really helps when towing up steep grades and also got rid of the ‘smoking like a locomotive’ problem it was having. This pickup now has about 120,000 miles on it, and I’m looking forward to another 120,000 miles and 20 more years of service. When I bought it 20 years ago I thought the $18,000 price tag was steep, but now I wouldn’t sell it or trade it for a new truck costing $25,000 to $30,000.”
“My 1997 Ford F-250 4-WD diesel pickup equipped with a 7.3-liter diesel engine is my best buy. My wife and I have a performance horse business, and she runs the rodeo circuit on a pro level. I’ve tried using different makes and models of pickups to pull our 3 and 4-horse trailer equipped with living quarters, but this pickup has the best pulling power and is also fuel efficient.”
On the negative side, “My Coleman 5,000-watt generator is extremely loud and the off switch is defective. It starts hard, but the worst problem is that I need ear muffs to work around it. I give a thumbs down for this machine.”
“My worst buy nomination would have to go to my 1989 Ford F-250 4-WD pickup equipped with a diesel engine. Why I stuck with it so long, I don’t know. Over the course of my ownership I’ve installed the following: two water pumps, four alternators, three starters, a new radiator, new injection pump, 16 new injectors (two complete sets), three clutches, one transmission, three clutch slave cylinders (they’re plastic and crack in the cold), two voltage regulators, one vacuum pump, and two complete sets of wheel bearings.
“All told, I’ve spent more to fix this pickup than I did to buy it. I’ve never gotten it out of the shop for less than $1,000. When it runs well, there isn’t a better truck on the road, but when things go wrong it isn’t worth a nickel.”
David nominates his 2000 Ford F-250 4-WD pickup as his “best buy.” “It leaks absolutely no lubricants of any kind and doesn’t even collect dust on any seals or gaskets. It has a lot of power and excellent brakes, heater, air conditioning, doors, tailgate, etc. I can’t find anything that needs to be improved on it. No problems.
“My 2002 Chevrolet Duramax 3500 pickup equipped with an Allison transmission is my worst buy. The doors on it sagged and can’t be adjusted. The front pump on the transmission leaks. It doesn’t have enough power, though the fuel economy is okay. I wouldn’t want my worst enemy to buy one.”
Junior likes his 2003 Drill Doctor 500 precision drill bit sharpener (Dakota Sales, Wyndmere, N. Dak. ph 800 260-9944 or 701 439-2860). “I got it as a Christmas gift. The day after Christmas I used it to sharpen more than 100 drill bits. I went to Lowes and bought an extra chuck that lets me sharpen bits up to 3/4 inches in diameter. I’ve probably got at least 100 more bits to sharpen when time permits. I love it.
“My 1993 Ford F-250 4-WD pickup is my worst buy. I bought it used when it was a year old and now it has about 93,000 miles. Two years ago both fuel tanks started leaking.The front tank still leaks. I used JB Weld to repair the back one. The bed is all rusted out, and a year ago the transmission went out. The truck is still in my shop with the transmission pulled, waiting on another one.”
“It has a lot of power and is quiet and comfortable,” reports Joe about his 2003 Ford F-250 4-WD pickup equipped with a 5.4-liter, V-8 engine. “It works great for pulling heavy loads. I drive
“It has more than 324,000 miles on it but is still going strong,” says Larry, satisfied owner of a 2000 Ford F-250 4-WD, 4-door, long wheelbase pickup equipped with a 7.3-liter turbocharged engine and automatic transmission. “I use it to pull a 30-ft. gooseneck trailer. With a loaded trailer, total gross weight is 28,000 lbs. I replaced the water pump at 281,000 miles and the battery at 296,000 miles. I had to replace the second battery at 320,465 miles. I replaced the injector wiring harness and inside valve covers at 300,000 miles. The left front wheel hub and wheel bearing assembly were replaced at 291,000 miles. Considering what I’ve put this pickup through, it has really held up well. I plan to see just how long it’ll keep going.”
On the “worst buy” side, he lists his Sony digital camera. “It’s cheaper to buy a new camera than to have this one repaired. I got no help from the company.”
“In May 2001 I bought a used 1999 Dodge 1-ton pickup equipped with a Cummins diesel engine. I was so pleased with it that last year I bought a new Dodge 2500 4-WD, 3/4-ton pickup equipped with a diesel engine and quad cab. It’s also a best buy. I use a snowplow with it and like how well it plows snow. With 4-WD it doesn’t spin a wheel.
“My 1990 Ford F-250 4-WD pickup, equipped with a 460 cu. in. engine, is my worst buy. I bought one model equipped with a gas engine and was really pleased with it, so I bought a second model that’s identical except it has a diesel engine. Luckily, both pickups came with a 6-year, 6,000-mile drivetrain warranty because both had to have new transmissions installed. One only had 16,000 miles on it.”
“My 1995 Ford F-250 4-WD pickup equipped with a Power Stroke diesel engine is my best buy. I use it almost every day. No problems.
“My Case 750 crawler tractor equipped with a bucket and backhoe is also a best buy.”
Nelson nominates his 2001 Ford F-250 4-WD, extended cab, shortbed pickup as his “best buy”. It’s equipped with an 8-cyl. gas engine and has a 4:10 ratio rear axle. “I’m pleased with how this pickup performs. It has a lot of power and a real comfortable ride.”
Doug’s impressed with his 2000 Ford F-250 4-WD super duty extended cab pickup with a 7.3-liter diesel engine. “I had been using a Chevy 2500 4-WD extended cab pickup with a 350 cu. in. engine. I liked the hauling capacity and feel of that pickup, but the performance of my Ford is stunning. It’ll tow anything, and when I have to pass it takes off like a rocket. It averages 23 mpg, which is much better than the 15 mpg I was getting with the Chevy. Buying this pickup was one of the best moves I ever made.”
“It’s the best pickup I’ve ever owned,” says Nelson about his 1986 Ford F-250 4-WD pickup equipped with a 6.9-liter diesel engine and 4-speed transmission. “It has more than 300,000 miles on it but still uses very little oil. It gets 14 mpg. The engine has never been touched except for a rebuilt fuel injection pump. It still steers tight without wandering all over the road. My next pickup will definitely be a Ford.”
“It gets a lot of hard use, but we’ve had very little trouble with it,” says David about his 1998 Kawasaki Prairie 400 4-WD ATV. “The company took care of a few minor problems. I have an artificial leg so I appreciate the automatic transmission. The floor board design is also helpful. There are more powerful ATV’s on the market, but after riding them for a while I really came to appreciate this machine.”
“My 1979 Ford F-250 4-WD pickup is a best buy. It has been all over the country and has been in a few tangles that required some hospitalization, but it came away better for it all.
“My 1972 Deere 4620 and 3020 tractors are dependable and are best buys.
“I’m well pleased with my Deere 535 round baler. I’ve owned Hesston and Gehl models before but this is the best.
“My biggest disappointments have been with my Case-IH 470 and 480 21-ft. disks. In my opinion, these discs were nothing but glorified sheet metal. I sold both of them and bought a Deere 14-ft. model. I can cover the same amount of ground as I had been covering with the two Case-IH models, and do a better job. No problems.
“My Hesston 6650 swather is a disaster. I don’t understand how a company can even put its name on a machine like this. I wish I still owned my Deere 1600 14-ft. hydraswing swather.
“I was given a kit to raise the rear bench seat in my 1985 Ford Supercab pickup. It was purchased through J.C. Whitney and was something that I had asked for. However, it’s a worst buy. The bolt holes in the brackets were about three sizes too big, the washers were too small, and I had to reshape some of them to fit. I was really disappointed with it.”
David’s happy with his 2000 Ford F-250 4-WD pickup equipped with a Power Stroke engine, automatic transmission, and 3:73 rear end. “It starts quickly, warms up fast, and gets a respectable 18 to 21 mpg. It has a lot of power and the heater and sound system are excellent. It’s comfortable to drive and the instruments are attractive and easy to read. The outside rear view mirrors provide great visibility, due to the way the doors are designed at the bottom of the window glass.
“My 1999 Chevrolet C2500 pickup equipped with a 6.5-liter diesel engine is my worst buy. It has no power. The valve covers, oil pan, and rear main seal leaked oil; the engine wouldn’t start when the temperature was below freezing; the door hinges on the cab wore out right away; trim inside and outside the cab fell off; and paint flaked off. Most of the time it’s in the shop waiting to be fixed.”
“I bought my 1978 Deere 4240 tractor used when it was seven years old and it’s my best buy. It has more than 9,200 hours on it . The only major repairs have been to the crank bearings and ring pump. This tractor seems to have more power now than when it was new.
“My 1978 Ford F-250 4-WD pickup equipped with a 351 cu. in. engine is a best buy. I bought it used when it was two years old. It has more than 210,000 hard miles on it and the engine has never been overhauled.
“I bought my 1990 Ford F-150 4-WD pickup used when it was six years old and it’s my worst buy. The pickup’s 302 cu. in. engine is underpowered, even though it has electronic fuel injection and this a lighter truck. It used more fuel and had more problems than my 1978 Ford F-250. I finally replaced it with a 1994 Chevrolet equipped with a 350 cu. in. engine. This model has much better performance and economy.”
George nominates 6-ton wagon gears built byPioneer Equipment (Dalton, Ohio) as his “best buy”. “Workmanship is excellent and they’re engineered to withstand extreme conditions. I bought two of these units in 1996 and highly recommend them to anyone.
“My worst buy is my 1993 Ford F-250 4-WD pickup. It gets only 6 to 8 mpg which I think is terrible. It has had a lot of problems. The front brakes had to be replaced, the thermostat fell apart inside the manifold, both gas tanks leak, and a U-joint had to be replaced. Also, it’s almost impossible to get it out of 4-WD.”
“My best buy is my 1985 Ford F-250 4-WD pickup equipped with a 460 cu. in. engine and C-6 transmission. It has more than 247,000 miles on it. The only trouble was at 120,000 miles when I lost a carrier bearing in the rear axle. I give part of the credit to Amsoil which I’ve used in the engine, transmission and rear end ever since I bought the pickup. The engine and transmission are still going strong.”
“We use it for everything, from hauling grain with a 16-ft. gooseneck trailer to pulling a triple axle 10-ton pin-hitch trailer that usually has a 1,100-gal. water tank on it,” says Brandon about a 1983 Ford F-250 4-WD pickup he and his dad, Chad, call their “best buy”. Powered by a 6.9-liter V-8 naturally aspirated diesel, it was purchased with 190,000 miles on it in 1992 for $5,000. It now has 290,000 trouble-free miles on it. “My dad has had many different pickups, but this is the best one by far.”
Ron’s still driving his 1974 Ford F-250 4-WD pickup which has a whopping 675,000 miles on it. “It was originally a heavy duty 3/4-ton. In 1982 it was damaged in an accident so we converted it to a 1-ton model and equipped it with an 8-ft. flat deck, 1-ton rear end, and dual wheels. We also replaced the original 360 cu. in. engine with a 428 cu. in. high performance engine which has been rebuilt twice over the years. The pickup had some rust so we replaced the hood and doors and put fiberglass floorboards in the cab. It still looks great. We use it to haul cows, firewood, and hay - sometimes all three in the same day. With its heavy-duty running gear it can pull almost anything, including 8-ton hay wagons. I wish the company would build trucks like this again.”
Reno owns a 1989 Ford F-250 4-WD pickup equipped with a 460 cu. in. engine. “It has more than 180,000 miles on it but still runs good. I had to change the wheel hubs a year ago and also a ring gear and starter, but I still think it’s a good pickup. Consumer Reports magazine said this model was a lemon, but I don’t know where they get their information.”
William’s made two “best buys” in the last couple of years.
“My 1997 Grasshopper 725 mower equipped with 52-in. deck and Kohler engine starts well and has plenty of power. I like the ease of handling and self-dumping bagger. They both come in handy in my lawn mowing business. My only complaint is that there are no dealers in southwestern Manitoba for parts or service work.
“Another ‘best buy’ is my 1997 Ford F-250 4-WD pickup equipped with a Powerstroke diesel engine. It’s got good ground clearance and tons of power. For example, it’ll pull a 24-ft. trailer loaded with two antique tractors with ease. It also provides great visibility. My wife would like to see a light on the gearshift and a ‘booster’ handle on the passenger side.”
On the negative side, William lists his 1996 Snapper self-propelled 21-in. mower powered by a Briggs & Stratton engine. “I used it a month before I discovered the air filter hadn’t been installed at the factory. The dealer told me the engine was ready to go and took five months to get the new motor. I traded it later in the season for a Deere that has worked fine.”
Neil’s impressed with his 1987 Ford F-250 4-WD extended cab pickup equipped with a 6.9-liter diesel turbocharged engine and 3-speed automatic transmission. “We load it up with an 11-ft. 2,500-lb. camper, hook a 18-ft. stock trailer full of horses and mules behind it, and head for the mountains. It gets decent mileage and has a lot of power on hills. It’s built Ford tough.”
“It’s an excellent truck,” says Dale about his 1997 Ford F-250 4-WD equipped with 7.3-liter engine. “Even with an automatic transmission it gets 19 to 20 mpg. I’ve put 23,000 miles on it and haven’t been back to the dealer yet.”
Michael nominates his 1998 New Idea 5408 disc mower as his “best buy”. “It’s well built and has blades that can be replaced quickly. No problems and no downtime.
“My 1997 New Idea 4844 round baler is a best buy. It takes less than 10 minutes for routine service, and it has never failed to make bales whether the grass is very short or long. The only condition is that the crop must be dry. I haven’t had to repair anything. I really like the simplicity of design and quiet operation.”
On the “worst buy” side, he lists his 1995 Ford F-250 4-WD pickup equipped with a turbocharged engine. “I’ve had to replace three fan belts, a belt tension pulley, and a water pump, and I’ve had problems with the clutch. I traded it in for a new 1997 model.”
“My best buy is my 1996 Ford F-250 4-WD pickup equipped with a 460 cu. in. engine and 4:10 rear end. We use it to pull a 550-bu. hopper wagon, a gooseneck livestock trailer, and a 24-ft. flat trailer. It handles all of them with ease. “My 1968 International 606 utility tractor is trouble-free and has a lot of power for its size.” On the “worst buy” side, he lists his 1978 International 4586 4-WD tractor. “I’m sure this tractor gave the original owner many long hours of good work, but when I finally got it I had nothing but problems. The first year the turbocharger went out. The second year the clutch went out. The third year the camshaft went out. The fourth year the tractor itself went out, and a new Case-IH Magnum 7240 came in.”
“The Westendorf TA26 front-end loader that I mounted on my Deutz 6807 tractor is a pleasure to operate. It takes only 3 to 5 minutes mount or dismount, switching from the bucket to a bale spear can be done in even less time. I don’t believe I could tear it up if I wanted to. “My Powder River cattle handling equipment is indestructible. “I’ve had problems with the bell housing on my 1985 Ford F-250 4-WD diesel pickup. The pivot mechanism for the clutch broke out and I had to reweld it. It checks OK when bolted down and indicated on a milling machine, but the clutch plates now last only 20,000 miles. Otherwise I like it.”
William’s disappointed with his 1985 Ford F-250 4-WD pickup. “It rides rough and literally beats itself apart, with the bed and fenders falling off. The tailgate is flimsy and gets broken and bent.”
“My son and I each bought a Subaru Legacy wagon in 1995. Neither has been back to the dealer. We just put in gas and change oil. The all-wheel drive is great on snow and on gravel roads.
“My worst buy is a 1996 Ford F-250 4-WD. It gets only 10 mpg and has no power with a load on. It won’t even go the speed limit on the interstate and it has a vibration at 30 to 45 mph that two visits to the dealer hasn’t solved. At less than 5,000 hrs., they now plan to replace both drive shafts. One other annoyance: the spare tire didn’t match the other four tires.”
Dave’s “best buy ever” is his 1966 Ford F-250 4-WD pickup equipped with a 352 cu. in. engine. “It always starts right up even when it’s 25 degrees below zero. The 4-WD works great in deep snow and on narrow mountain roads that we use while cutting Christmas trees. It has 189,000 miles on it and a lot of them were 4-WD miles over pasture. Last year we totally rebuilt it. Now I wouldn’t trade it even up for a new pickup.” On the “worst buy” side, he lists his 1996 Chevrolet C250 pickup equipped with a 6.5-liter diesel engine. “One of the doors fell off and we discovered that the hinges were just glued on. The engine would seize when pulling hard. When unloaded the overload springs would constantly hit the spring perches and make a bumping noise. My 1/2-ton Ford pickup can haul more cargo than this truck.”
Tom’s the satisfied owner of a 1996 Ford F-250 4-WD pickup equipped with a diesel engine. “I had 11 other pickups before this one. It’s the first diesel pickup I’ve ever owned and also the best. The power and performance of the diesel engine is far superior to that of a gas-powered model. It goes right through deep snow-blocked roads. Also, it’s 50 percent more fuel efficient than any gas-powered pickup I’ve owned.”
Art has 536,000 miles on his 1980 Ford F-250 4-WD pickup with automatic transmission. “We’ve had to replace the transmission twice and overhauled the engine at 270,000 miles. It does have some rust. We use it to pull an 18-ft. stock trailer and a 20-ft. flatbed trailer, and to haul hay bales and a 1,000-gal. water tank. An all-time best buy.”
“I like my 1992 Ford F-250 4-WD pickup, but I’m disappointed with the quality with which it was built. The front bumper fell off. It was held on by four bolts about the size of a pencil and the nuts were the metal clip type. I was lucky the bumper didn’t fall off while I was driving.”
“My 1994 New Holland 565 baler has been trouble-free. The only time it doesn’t tie is when the twine runs out. It can make bales from 20 to 100 lbs.” On the negative side, “My 1993 Ford F-250 4-WD pickup equipped with a diesel engine and automatic transmission has been back to the dealer numerous times. The front alignment never has worked right. The brakes froze up and there are problems with the rear anti-lock brakes. It needed new fuel injectors at 25,000 miles. My wife calls this pickup my white lemon.”
Rob Kraft, Laurel, Mont.: Rob’s the satisfied owner of a 1992 Ford F-250 4WD diesel pickup. “I use it to pull my 20-ft. gooseneck livestock trailer. Handles well and has plenty of power, even on hills, It’s fuel efficient and has a comfortable cab. So far it’s been trouble-free and easy to start in cold weather.”
George Janecek, Washington, Iowa: A 1992 Titan flatbed gooseneck “beavertail” trailer equipped with dual wheels and two 9,000-Ib. axles heads George's “best buy” list. “We use it to haul lumber, steel, hay, and equipment. Last spring we puta 1,500gal. starter fertilizer tank on it and used it to haul a day’s supply of seed to the field.” On the “worst buy” side, George lists his 1991 Ford F-250 4-WD extended cab pickup. “At 22,000 miles the transmission failed and left me stranded on the road. At 28,000 miles the transfer case broke and I was stranded again, this time with a gooseneck trailer full of hogs. At 32,000 miles one of the front hubs broke. At 34,000 miles the anti-lock brake sensor broke, and at 38,000 miles the ‘check engine’ gauge on the dash began to flash. The rear seat is mounted too low to be comfortable. I’ve used it only onthe highway, never forchores. “Tuse my best buy 1981 Chevrolet pickup to do chores, It has 145,000 miles and the transmission is original.”
Chris Malott, Bethel, Ohio: Chris's “best Buy” is His 1989 Case-TH 496 22-ft. disk. “It has excellent penetration and does a good job leveling the soil. The only problem I’ ve had is with the hangers for the rock flex springs. “My 1989 Ford F-2504-WD pickup was the best riding heavy duty truck I ever drove, but had a terrible paint job and poor fuel efficiency. The 351 cu. in, engine with 5-speed overdrive transmission got only 10 1/2 mpg on a good day, traded it in for a diesel.”
Stan Campbell, Iona Station, Ontario: “It’s the best blower we've ever had,” says Stan about his Gehl 1560 forage blower. “Wet haylage doesn’t plug it up like on other blowers. The only time it plugs is when the silo is full. “Our 1988 Ford F-2504-WD pickup is a worst buy. The front brakesrattle constantly and the rear end leaks oil. Electronic fuel injected engines aren't made for farm use. It ominate t Buys won’t start on a damp morning or if it gets a little wet. The anti-lock brakes lock up all the time. My 1979 Ford F-2504-WD pickup equipped with a 400 cu. in. engine isa better truck. It has almost 200,000 miles.”
Frank Jones, Cottontown, Tenn.: Frank’s had trouble with his 1988 Ford F250 4-WD pickup. “I was on my way to work one day when I hit the brakes at a highway intersection. The antilock brakes released and before they caught again I was stuck in the middle of the intersection ‘dead’ - or at least that’s the way it could have ended. I often wonder how many poor souls have died as a result of this happening to them.”
Larry Gregerson, Herman, Neb.: “My Deere 4555 tractor is fuel efficient and hasn't had any problems. “My Deere 9500 combine is easy to adjust and service. Capacity is excellent. “My 1992 Ford F-250 4-WD pickup, equipped with a 7.3-liter diesel engine and 5-speed transmission, is a best buy. Drives comfortably, has plenty of power, and the soft ride suspension option gives it a better ride than the 1988 F-250 I had been using.”
Martin Reynolds, Indianola, Iowa: Martin says his 1989 Ford F-250 4-WD diesel pickup “has good power, load capacity and mileage. It has 40,000 miles and I’ve only had it in the shop twice for minor repairs. It’s a best buy.”
Jim Schweizer, Olney, Ill: Jim's unhappy with his 1988 Ford F-250 4-WD pickup. “At22,000 miles it started to use oil and the paint is coming off in places, It rattles a lot and makes a lot of noise. The Firestone tires on it wore out after only 16,000 miles. “My 1985 International 1460 combine has great capacity, a quiet cab, is fuel efficient,and easy to service. I’ ve had very little down time and grain quality is excellent.”
R.S. Mitchell, Cottage Grove, Wis.: A Ford F-250 4-WD pickup equipped with a 301 cu. in. engine and automatic transmission heads his “best buy” list. “It rides and handles well for a truck of its size. It gets 15 mpg which isn’t great, but it has plenty of power for pulling trailers and gravity wagons. It’s a nice truck.”
Leon Wasielewski, Waterford, Penn.: Leon's disappointed with his 1988 Ford F250 4-WD pickup equipped with a 6-cylinder engine and standard transmission. “Fuel economy is excellent at 20 to 22 mpg, but it has a terrible paint job. Paint chipped off in big 1/2 to 3-in. strips and now it’s all rusty. We took it back to the dealer two months after we bought it, but they wouldn’t do anything to solve the problem which they said was caused by rocks flying up off the road. But paint is chipped even on the roof and inside the bed.”
Ed Powell, Portland, Mich.: A 1986 Oldsmobile 98 car is Ed's “worst buy”. “It's had many problems including the starter, cruise control, brakes, and transmission. “My best buy is my 1988 Ford F-250 4WD pickup equipped with a 300 cu. in. 6cylinder engine. It has 46,000 miles and the only repairs, other than regular maintenance, have been for a new light switch and windshield wiper switch, I use it to pull fertilizer carts and loaded grain wagons weighing up to 26,000 Ibs. In the winter I use it to pull a 6,000-Ib. travel trailer to Florida or Arizona, Last summer I mounted a 2,000-Ib. camper on it and drove 11,000 miles to Alaska.”
Mike Coble, Walnut Grove, Mo.: “It has lots of power and is a pleasure to drive,” reports Mike, pleased with his 1990 Ford F250 4-WD pickup equipped with a 460 cu. in, engine. Mike also likes his Motorola Radius business band radios. “They have very good range and are a good value.”
Charles Kunka, Hamilton, Ohio: Charles says his John Blue 500-gal. trailer sprayer cquipped with a ground-driven pump heads his “best buy” list. “I just fill the sprayer, set the pump according to the desired application rate, and start spraying. It’s very accurate and I don’t have to worry about speed or pressure.” On the “worst buy” side, Charles is unhappy with his 1988 Ford F-250 4-WD diesel pickup. “After a few months of getting stuck in wet grass, I found out that the company had installed two different drive axle ratios. The frontone was always trying to outrun the back one. The dealer solved the problem after convinced him that the company messed up. traded itin fora 1989 Ford F-2504-WD diesel pickup. After only 15,000 miles the injector pump went bad. I keep asking myself why I have to pay $20,000 for a pickup that won't last a year without a major problem.”
Gale Carpenter, Union City, Mich.: “What can you buy American-made that's any good?”, asks Gale, unhappy owner of several American-made pickups. “The rear differential on my 1988 Chevrolet 2500 4WD went out three times in 10,000 miles and the brakes failed at 22,000 miles. I traded it for a 1989 Ford F-250 4-WD equipped with a 351 cu. in. gas engine which didn’t run right from day one. At 22,000 miles the transfer case went out and the seals on the front differential started leaking. I wanted to trade it for a Dodge diesel, but I couldn’t get delivery for six months so I traded for a 1990 Ford F-250 5speed diesel. The synchronizers went out of fourth gear within 2,800 miles. My wife and daughter have both owned Toyota 4-WDs and ran them 100,000 miles without any problems. They both just bought new Toyota 4-WDs and the salesman told us that Toyota might come out with a full size pickup in two years. If it’s as good as their small pickups it'll be ‘see ya’ for the big three auto makers. If it’s true about the Japanese owning us, who do we have to blame?”
Charles Bieber, Mamou, La.: 760 combine. “I haven't replaced one chain or sprocket during 1,600 hours of use, The paddle clevator is relatively wouble-free and the stone trap is casy to empty, The 254T Perkins engine is well matched to the combine’s capacity.” Charles Bieber, Mamou, La.: “My worst buy is my 1984 Ford F-250 4-WD diesel pickup. When the rear end went out at 52,000 miles, the company wouldn't honor the lifetime warranty so I let my local Ford dealership repair it. At 151,000 miles the rear end went out again so I took the pickup back to the same dealership. They said the problem was that the carrier bolts backed out and that it wasn’t covered by the warranty, I called the area representative, buthe said the dealer had the final word on accepting alifetime warranty claim. As acustomer 1 do have the final word. No more Fords.”
Gale Carpenter, Union City, Mich.: “Tt ran like a scalded dog before I traded it,” says Gale, unhappy owner of a 1988 Chevrolet 2500 4-WD pickup. “At times the 3speed overdrive transmission slam-shifted from forwerd to reverse, while at other times, carrying the same load, it would go right into overdrive at 50 mph. The rear differential had to be overhauled three times by 8,000 miles. The right front tire wore bare on the outside but had all its tread left on the inside, and the brakes were shot at 23,000 miles. The dealership did nothing to correct these problems, so I took GM into arbitration, I drove 65 miles to Grand Rapids to have aGM representative tell me ‘We don’t builda truck to be driven off-road.’ He added that the truck wasn’t designed to pull a gooseneck trailer, as it changed the geometry of the suspension. I traded fora 1989 Ford F-2504-WD pickup (8,600 Ibs. gross vehicle weight) with 4:10 gears, 351 cu. in. engine and automatic transmission. It’s built like a Caterpillar D-8 and rides nice. But it gets only 6 mpg without carrying a load and only 3 mpg carrying a load. It doesn’t have enough power to adequately pull a tri-axle trailer loaded with a tractor. If I'm driving dowhhill or on a long stretch of level road, the pickup sometimes shifts into overdrive. In this day of college-educated engineers, you'd think a 351 engine that developed 300 hp and got 15 mpg back in the 1960's and 1970’s would certainly do better than 200 hp and 6 mpg in the 1980’s, Can anyone explain why we have to shell out $18,500 for a truck that’s not worth $9,000 and go through all these problems? And the company says, ‘Oh well, things happen. Sorry about that.’”
Ford F-150 4-WD pickup
48 Best Buys10 Worst Buys“My worst buy ever was the first new vehicle we ever bought – a 2009 Ford F-150 4-WD with a 4.6 engine. At 52,000 miles, just 2,000 past the warranty period, the throttle body had to be replaced. At 100,000 miles I replaced all the brake pads for the second time. At 110,000 miles the 4-WD actuator and some of the ball joints failed. At 115,000 miles the front CV joints had to be replaced. At 150,000, the transmission blew up to the extent that the only thing that could be reused was the outer housing. Recently, while replacing the brakes again at 166,000, the mechanic found that two of the ball joints were bad again and that the springs on the struts were broken and needed replacement. He said he was surprised Ford didn’t have a recall on them because he replaces so many of them. On top of all this, the cab, box and tailgate are rusting out and we only get 15 to 16 mpg. I’ve spent more than $15,000 on repairs.”
He’s had problems with the Integrated Wheel End (IWE) system on his 2014 Ford F-150 4-WD pickup. The IWE system is designed to lock and unlock the front hubs when the driver changes back and forth between 2-WD and 4-WD.
“However, if there is the slightest leak in the IWE system there’s not enough vacuum to fully disengage the 4-WD. That results in the actuator gears stripping, and then the hubs won’t disengage or engage properly. It’s a very bad system,” says Andy. “The company offers a kit to fix the problem but it costs $150. My advice is, don’t buy a Ford pickup equipped with the IWE system.”
He owns a 1999 Ford F-150 4-WD extended cab pickup with 236,540 miles on it. “We change the oil and lube this pickup every 4,000 miles or so. We’ve never replaced the antifreeze, transmission oil, power steering fluid or freon, yet there are no signs of any problems. We did replace the starter and alternator.”
“I like my 2008 Ford F-150 4-WD crew cab pickup equipped with a 5.4-liter engine. It has about 88,000 miles on it and is on its second set of tires. It’s the best Ford pickup I’ve ever owned.”
“My 2014 Ford F-150 4-WD pickup has a very comfortable ride, and I like the rear view camera and tailgate ladder. Also, the rear doors and seats are comfortable and easy to get in and out of. It has a 5.0-liter engine that gets about 19 mpg.”
“I put about 300,000 miles on my 1990 Ford F-150 4-WD pickup equipped with a 300 cu. in., 6-cyl. engine, without ever touching the engine. When the odometer reached 100,000 miles the front seal started dripping about a quart of oil every 3,500 miles, but the leak never got any worse. I sold the pickup to someone who has put another 100,000 miles on it, again without touching the engine.”
“I own a 2012 Ford F-150 4-WD pickup equipped with a 5.0-liter engine. It rides great and is reasonably fuel efficient.
“My Kubota 30H 4-WD loader tractor is a real workhorse.”
On the “worst buy” side, he lists his 2007 Honda Odyssey minivan. “I had problems with the brakes locking up on the highway, and with the brake lights. But the biggest problem was an electrical one. Without warning, the battery would suddenly go completely dead. Three batteries later I finally traded this vehicle.”
“My 2005 Ford F-150 4-WD pickup, which I bought used, has plenty of power and is fuel efficient. Overall, I like it. However, the electronic shift on the transfer case is a joke. It almost takes an act of Congress to get it into 4-WD. Otherwise it’s a good pickup.”
“I like my 2011 Ford F-150 4-WD pickup which is equipped with an EcoBoost 6-cyl. engine. I’ve always been a Ford truck owner and used V-6 engines, but after reading about the EcoBoost engine I decided to buy one. It’s all that they advertise. It has great torque at low speed and gets good mileage even when pulling a heavy load.”
“I bought a used 2007 Ford F-150 4-WD crewcab pickup with about 48,000 miles. It rides smooth and quiet and the stereo has an incredible sound. It can haul a cord of wood in the bed while pulling a car trailer with an 11,000-lb. load.
“In 2010 I got a Sears Craftsman cordless drill as a Christmas gift. The batteries don’t hold a charge and the drill chuck won’t tighten up enough to keep from slipping. New batteries are as expensive as the drill and don’t keep a charge for more than 15 min. The loss of power gets frustrating when I’m working on a job away from an electrical outlet. I bought a new charger thinking that would solve the problem, but it didn’t.”
Gary’s happy with the 1996 Ford F-150 4-WD pickup he bought used equipped with a 302 cu. in., V-8 engine and automatic transmission. “I bought this pickup with about 112,000 miles, and now it has more than 346,000 miles with no major problems. I’ve replaced the starter, alternator, and fuel pump. It still uses only about a quart of oil every 2,000 miles. Not bad for a $1,200 buy.”
“My 2010 Ford F-150 4-WD pickup equipped with a 5.4-liter gas engine is my worst buy. It has about 20,000 miles on it. The rear end went out once and the brakes have had problems. This pickup rides on Goodyear Wrangler tires, two of which had to be replaced because of separated belts. The computer says the pickup is getting 14.4 mpg, but I think that’s a stretch. Now I’ve put it up for sale.
“I like anything Deere. I have ¿ ve tractors, a sprayer, a combine, a riding mower, and several large implements. No problems with any of them.”
“I’ve owned more than 25 new pickups in the past 50 years, and this one is the best yet,” says Robert about his 2009 Ford F-150 4-WD crewcab FX4. “It has about 34,000 miles on it. The ride, drive, gas mileage, pulling power, visibility, comfort and handling on it are fantastic.”
“I like shopping at Tractor Supply Company. It’s a small store so I can get in and out quickly. They sell good stuff at a good price and provide excellent customer service.
“My Deere Gator is a best buy. I have no idea how I ever got by without it.
“My 2002 Ford F-150 4-WD pickup works great. It’s equipped with a V-6 engine and a 5-speed manual transmission. The seal on the slave cylinder went out. It would have been an expensive 10-hr. repair at the dealership. Instead, I pulled the engine out and did the work myself in only 5 hrs.”
“I like Shark Bite plumbing connectors (ph 800 518-5388; www.sharkbiteplumbing.com). I used them when I had to replace a shower valve in a spot where it would have been difficult to resolder the copper piping. These couplers just slip on the ends of the pipe to connect, and that’s it. Once pushed to the proper depth, you’re done; no extra parts, soldering or tools are required. These connectors are kind of expensive, but the time and trouble you save is well worth it in emergency situations.
“My 2005 Ford F-150 4-WD pickup is my worst buy. At only about 20,000 miles the reverse gear went out, but the 3-year warranty had expired. I’m pretty sure the service manager spewed coffee on his computer screen when I suggested that Ford help with the repair. I live in a remote area of Alaska where the closest dealer is 400 air miles away. I ended up paying for the repair.”
“This pickup just keeps on running,” says Howard about his 1993 Ford F-150 4-WD model. “It has about 60,000 miles on it yet the transmission, alternator and starter are all original. The engine never uses more than a half quart of oil between oil changes.”
“My 2005 Ford F-150 4-WD crew cab pickup rides like a car and gets a reasonable 16 mpg.
“I’m also happy with my 2004 Deere 8120 MFWD tractor. It’s fuel efficient and comfortable to drive.”
Mark’s impressed with his 1991 Ford F-150 4-WD pickup equipped with a 300 cu. in., 6-cyl. engine and a 5-speed manual transmission. “It has more than 170,000 miles on it and has been a really good pickup. When I put the transmission in low range, the computer keeps it going at a constant speed - even while I’m hauling 90 small square bales and a hay loader on my trailer - without ever having to touch the accelerator.”
“My 1992 Ford F-150 4-WD pickup equipped with a 351 cu. in. engine and automatic transmission is my worst buy. I started having problems with it the day I took delivery. Whenever I tried to use the windshield wipers I’d hear static on the radio. Another problem was that I had to replace three timing chains and the company would only pay for one. Also, the paint failed and the company wouldn’t help out. The seat covers had to replaced twice and are still bad. The dealer told me the problem with the seat covers was that I didn’t get in and out of the pickup correctly. Also, the engine slugged up so bad that the oil pump had to be replaced twice.”
“My Ford 1210 tractor equipped with a front-end loader and backhoe is a best buy. I bought it used 10 years ago and it has saved me a lot of work. I use it around our yard to plant trees and do other small jobs. It still runs good and has a lot of power for its size. It’s also easy on fuel and small enough to get in tight places. I also use this tractor to do some work for my neighbors.
“My 1999 Ford F-150 4-WD pickup equipped with a 5.4-liter engine is my worst buy. At about 45,000 miles the right cylinder head gasket started leaking oil at the rear of the engine. I talked to six service managers at Ford dealers in northern Utah and southern Idaho and learned that this leakage is a common problem in the 4.6 and 5.4-liter engines. It’s caused by shoddy work in the manufacturing process. Metal chips left on the block or head aren’t cleaned off and when the head gasket is installed, the chips keep the gasket from sealing and in some cases damage the head. The oil leak is usually at the right rear, left front or both heads on the engine. How hard is it to clean the head and block before the engine is assembled? Ford hasn’t been able to do it in six years. I let my neighbor, a fan of Dodge, read Ford’s service bulletin 02-22-7 and his question is, if the chips are on the block and head why wouldn’t they be inside the engine also?
“Ford’s recommendation is to pull the engine before removing the heads so the heads won’t get damaged during removal from the engine. Two dealers I talked to won’t replace the gaskets unless new heads are installed. Labor, two new heads, the gaskets, recharging the air conditioner, etc., put the cost at about $3,000.
“When I called Ford and filed a complaint, I asked why they sent pickups out knowing they had defects in them. Their reply was that it doesn’t make any difference if the pickups leave the factory with defects because if they fail during the warranty (three years or 36,000 miles) they’ll fix it - after that it’s the owner’s problem. This is how Ford expects to reach their goal of 100 percent customer satisfaction. My position is if the truck leaves the factory with defects, Ford should fix it, under warranty or not under warranty.
“The people at Ford think they can send their pickups out with defects in them and after the owners get stuck with a huge repair bill they’ll buy another one of their junkers. Not me, I’ve been driving Ford trucks since May 1967 but I wouldn’t buy another one if they were having a two-for-one sale. Besides, if you pay $30,000 for a pickup and it can’t run more than 45,000 miles, why would you want another one?”
Lynn likes his 1994 Ford F-150 4-WD pickup equipped with a 302 cu. in., V-8 engine and automatic transmission. “I bought it used with about 35,000 miles on it. Now it has more than 102,000 miles and is still going strong. It gets about 16 mpg. I replaced the radiator at about 100,000 miles.”
“My 2001 Ford F-150 4-WD pickup has about 23,000 miles on it and has worked flawlessly. It requires only regular maintenance and drives and rides great.”
“My 2000 Ford F-150 4-WD pickup is my worst buy. It steers hard, which makes it difficult to stay on the road. I took the pickup back to the dealer at 12,000 miles to have the tires aligned. However, the warranty didn’t cover alignment work so I had to spend $44 of my own money. The dealer put 45 to 50 lbs. of air pressure in the tires, but it didn’t help. One week later I took the pickup to another dealer and had to spend another $44 for another alignment. This dealer let air out of the tires. It helped some, but it’s still hard to keep the pickup on the road.”
“My 1989 Ford F-150 4-WD pickup equipped with a 4.9-liter 6-cyl. engine and 4-speed manual transmission is my best buy. It has almost 100,000 miles on it but the brakes are still in good shape. We’ve used it to pull wagons and tractors and to haul hay, etc. It still runs great and doesn’t use any oil.”
“I bought my 1978 Deere 4240 tractor used when it was seven years old and it’s my best buy. It has more than 9,200 hours on it . The only major repairs have been to the crank bearings and ring pump. This tractor seems to have more power now than when it was new.
“My 1978 Ford F-250 4-WD pickup equipped with a 351 cu. in. engine is a best buy. I bought it used when it was two years old. It has more than 210,000 hard miles on it and the engine has never been overhauled.
“I bought my 1990 Ford F-150 4-WD pickup used when it was six years old and it’s my worst buy. The pickup’s 302 cu. in. engine is underpowered, even though it has electronic fuel injection and this a lighter truck. It used more fuel and had more problems than my 1978 Ford F-250. I finally replaced it with a 1994 Chevrolet equipped with a 350 cu. in. engine. This model has much better performance and economy.”
Elmer’s impressed with his 1998 Ford F-150 4-WD pickup equipped with a V-6 gas engine and 5-speed transmission. “I like the engine and transmission, and also being able to shift into 4-WD on-the-go. If I see a spot of ice on the road ahead of me I can quickly shift into 4-WD so I won’t slip.
“My worst buy is a Dayton 1/3 hp electric motor that I tried using to power a small fan. The motor didn’t have enough power to start the fan, and the company wouldn’t do anything about it.”
“I bought my 1988 Deere 4650 MFWD tractor used with 200 hours on it. It’s my best buy. It now has more than 6,400 hours on it and still runs like new. It has needed only a few minor repairs. I really like the front wheel assist and don’t know how I ever got along without it in the past.
“My 1996 Deere 8300 MFWD tractor equipped with a 200 hp engine and 16-speed Powershift transmission is a best buy. It performs well and has a quiet cab. My only complaint is that it has a lot of electronics and if something goes wrong with that, I can’t fix it at all. I have to call for a service mechanic to trace down the problem and repair it. My father and I have run Deere equipment for over 40 years and really feel that ‘Nothing Runs Like A Deere’.
“My 1993 Ford F-150 4-WD pickup equipped with a 302 cu. in. engine and 4-speed transmission is my worst buy. This pickup has really soured me on Fords. It’s underpowered and gets a horrible 10 mpg without pulling a load. I can’t start out in second gear without having to rev the engine to at least 1,100 rpm’s. Otherwise the engine will kill. I won’t buy another Ford again.”
A mid 1990’s Haybuster Rock-Eze rock picker rates as Bill’s “best buy”. “This machine runs off tractor hydraulics and works great behind a small tractor. I use a series IV D17 Allis-Chalmers tractor to pull it. I use it mostly to ‘spot pick’ rocks in the field. It combs the surface without tearing the seeds out of the ground so we can use it after the crop is planted. I wouldn’t want to farm without it.
“We’re well pleased with our 1997 Ford F-150 4-WD pickup. It rides good and handles great and has been trouble-free. It rides so nice that my wife and kids often drive it instead of our car. We especially like the ‘shift-on-the-fly’ 4-WD engagement option.”
“I bought my 1988 Ford F-150 4-WD pickup used. I had to make some repairs to the engine and front end. Otherwise, this pickup has worked great. It has well more than 100,000 miles on it.”
“I’m pleased with the comfort and quiet ride on my 1999 Ford F-150 4-WD pickup. I use it regularly to make trips to farm land 200 miles away.
“I’m impressed with my New Holland TN55D tractor. I especially like the cab’s roominess and ease of entry since I’m tall and getting a little stiff with age. The cab on this tractor is far superior to the cabs on other tractors of similar size.”
“My 1997 Deere 6 by 4 Gator has been absolutely trouble-free and is my best buy. It starts the first time, every time, no matter how cold the weather is. It’s the perfect machine for getting in and out of a woodlot to cut firewood, especially in wet conditions. It’ll haul a half face cord of wood at a time.
“My 1999 New Holland 1920 4-WD tractor equipped with a Great Bend front-end loader is a best buy. It’s a real workhorse for its size. The 12 by 12 transmission was well worth the extra cost.
“My 1995 Ford F-150 4-WD pickup equipped with a 300 cu. in. 6-cyl. engine and a 5-speed transmission is a best buy. It’s a very reliable truck. The only problem I’ve had is with the cheaply-built oil pan. At 57,000 miles, the threads are bad so it will have to be replaced.
“My three Husqvarna chainsaws - models 51, 254, and 268 - are also best buys. They’ve never let me down.”
“My 1998 Ford F-150 4-WD pickup has been totally dependable. It has more than 26,000 miles on it with no trouble at all. It rides like a luxury car.”
Forest likes his 1998 Ford F-150 4-WD pickup with Goodyear tires. “I do a lot of driving and already have 60,000 miles on the pickup. I’m impressed with the Goodyear tires – they’re still holding up well. My other three pickups had General tires which generally weren’t good for more than about 12,000 miles.
“My 1966 Deere 4020 tractor equipped with a diesel engine is a best buy. It has a whopping 23,000 hours on it. I overhauled the engine at 7,000 hours and again at 16,000 hours. Two years ago I bought a 20-ft. Bush Hog mower to use with it. I’m well pleased with both the mower and the tractor. Even though the tractor is 34 years old, it pulls the mower very well. I mow 800 to 1,000 acres every year.”
“I like my 1996 Ford F-150 4-WD extended cab pickup. It handles nice and the 350 cu. in. engine has a lot of power and has been trouble-free. It rides nice and is a beautiful pickup.”
“I bought it with 8,000 miles on it. Soon after, I traveled 3,300 miles through ice, snow and cold in the Rocky Mountains and averaged 16 mpg,” says James about his “best buy” 1996 Ford F-150 4-WD pickup. “It handles as well as our Lincoln Town Car.
“I also added a remote auto start, which turned out to be a real convenience. It lets me start the truck from my kitchen or motel room.” (DesignTech International Inc., 7955 Cameron Brown Court, Springfield, Va. 22153; ph 703 866-2000).
Keith’s “worst buy” was his 1989 Jeep Commanche 2-WD pickup. “I should’ve known that I was in for a rough ride when the oil pan rotted out and the seals went out on the rear axle before the truck was even two years old. At about 40,000 miles the syn-chronizers started to go out in the transmission.
“Shortly after the power train warranty had expired, the valve lifters started to rattle in the engine. At about 60,000 miles I put new brakes on the truck. None of the parts were available from a jobber so I had to buy all the parts from Chrysler. The front rotors cost me $100 apiece and the total brake job cost almost $700. The real killer, though, was when the sides on the bed started to rust out. It was a nightmare trying to get Chrysler to back up its 7-year/100,000 mile rust perforation warranty.
“I drove the truck for seven years and put 84,000 miles on it before trading it in on a 1996 Ford F-150 4-WD. The Ford dealer allowed me $650 for the Jeep and I can’t blame him.”
“I like my 1996 Ford F-150 4-WD pickup. It has more than 40,000 miles with only regular oil changes.”
Glenn traded his International 1480 combine in for a 1995 Case-IH 2188 model which is his “best buy”. “It has more horsepower and hydraulic capacity than the 1480 so the header raises faster. Also, the hydrostatic drive transmission doesn’t slip as much and the sieves and fan have more capacity. “One of my worst buys ever was my 1990 Ford F-150 4-WD pickup equipped with a 6-cyl. engine. Every time I started out I had to rev the engine way up and slip the clutch or the engine would die. The paint peeled off and the dealer said the company would pay to have it repainted. However, they didn’t.”
Russell’s pleased with his 1997 Ford F-150 4-WD extended cab pickup equipped with 4.6 liter V-8. “It performs well and gets good gas mileage,” he says. “The third door is really convenient.”
“My 1995 Ford F-150 4-WD pickup is the nicest vehicle I’ve ever owned. It has a quiet, smooth ride and the automatic transmission shifts smooth. The 351 cu. in. engine has a lot of power but could be more fuel efficient. “My 1996 Deere 535 round baler, coupled with my Deere 7800 MFWD tractor equipped with a powershift transmission, is a pleasure to operate. Makes solid bales that weigh twice as much as the ones we made with our old Deere 510. I really like the net wrap. Holds prairie hay together and virtually eliminates spoilage.”
“I’m well pleased with my 1997 Ford F-150 4-WD pickup equipped with a 4.6-liter V-8 gas engine. It gets 16 to 18 mpg and rides and handles like a car. “I also like my 1994 Deere 4760 MFWD tractor. It handles well and is fuel efficient.”
“I use my Crustbuster 15-ft. 10-in. hoe drill to plant soybeans and milo in six 30-in. rows and also to plant wheat, oats, and alfalfa. No problems. My neighbors often borrow it. “I’ve used my 1987 Gleaner 65 C-2 combine to cut about 400 acres a year for the past nine years. Very few problems. “I like my 1978 Ford F-150 4-WD pickup which I bought used nine years ago. It has 197,000 miles on it but the 400 cu. in. engine is only now starting to use a little oil - a quart every 500 or 600 miles.”
Owen’s “best buy” is his 1997 Ford F-150 4-WD pickup. “The 6-cyl. engine has a lot of power and it rides nice, and we like the new look. However, we wish it were available with more choices of color.”
Howard’s the satisfied owner of a 1995 Ford F-150 4-WD pickup equipped with an in-line 6-cyl., 4.9-liter engine. “It’s easy on fuel, has a lot of power, looks good, and was priced lower than many used Chevy and GM pickups that I checked out.”
Myles owns a “best buy” 1996 Ford F-150 4-WD extended cab, short box pickup equipped with a 352 cu. in. engine and 4-speed automatic overdrive transmission. It’s his “best buy”. “I tested a lot of other pickups before I bought it. Dodge tried to talk me into buying a Dakota in order to save on gas, but the difference between driving the Ford and Dodge models I tested is like the difference between driving a Cadillac and a Volkswagen. I also have a Dodge Caravan. It’s a nice minivan but it has terrible road noise, especially compared to my Ford pickup. The pickup also rides better than the van.”
“It rides comfortably and has a lot of power,” says Alfred, pleased with his 1993 Ford F-150 4-WD pickup equipped with a 302 cu. in., V-8 fuel-injected engine. “My Westfield 10-in. dia., 61-ft. long grain auger is a real grain eater. It has hydraulic lift so it’s easy to set up and take down.”
“I’m well satisfied with my 1994 Ford F-150 4-WD pickup equipped with a 6-cyl. engine and 5-speed manual transmission. It rides and drives well and has a lot of power. It’s also fuel efficient and consistently gets 15 to 17 mpg. I’ve put 12,000 miles on it with no problems. The clear coat finish is easy to clean and looks good.” On the “worst buy” side, he lists Firestone ATX radial tires. “The tires were original equipment on my 1992 Ford F-150 4-WD pickup which I bought new. They lasted only 10,000 miles - the steel belts separated on three of the four tires. I replaced them with B.F. Goodrich mud terrain radial tires which I really like. They have 25,000 miles on them and I’ve never had a flat tire.”
Kenneth H. Ferguson, Riceville, Iowa: “T like my 1989 White 100 FWA tractor. It has 2,000 hours on it. I had some problems with the fuel injector pump at first, but the company promptly solved the problems. “A wheel bearing went out at 19,000 miles on my 1989 Ford F-1504-WD pickup. The company and dealer said the bearing wasn’t part of the drive train so it wasn’t covered by the warranty. I had to pay for the repair myself. Then the paint started falling off and the dealer wouldn't do anything about that, either. made several phone calls to the company. They hung up on me two different times. I traded it in for a 1994 Dodge pickup. I love it.”
Pete Lamp, Kendallville, Ind.: Pete has 20,000 miles on his 1992 Ford F-1504-WD pickup equipped with a 4-speed transmission and 300 cu. in. 6-cyl. engine. “I’m well pleased with it, Last winter we hada spell of 20 below zero weather but it never failed to start. It’s had only a couple of minor problems which were promptly handled by my dealer.”
Bob McComb, Castleton, Ontario: Bob’s the owner of a 1991 Ford F-150 4WD pickup. “I'm generally satisfied with it, but there seems to be a problem with the auto-hubs or transfer case. Both were replaced under partial warranty.”
Bill Wagoner, Emden, Ill..: Bill’s 1991 DMI field cultivator and spring tine harrow heads his “‘best buy” list. “The field cultivator goes through heavy residue without plugging. It’s built strong and should last for years. Every moveable part has a grease zerk on it. We had a couple of minor problems which the company solved promptly. It does a good job and stays in the ground.” Harvey R. Wirkler, Farmersburg, Towa: “It rides well and is fuel efficient,” runs like new,” says Harvey, pleased with his 1991 Ford F-1504-WD pickup equipped with a 302 cu. in. V-8 engine. “I’m well pleased with my 1991 Case-IH 7140 tractor and with my DMI wagons.”
Edwin Surface, Waynesville, Ohio: A 1991 Deere 265 garden tractor equipped with a 46-in. mower deck rates as Edwin's “best buy”. “Ithas almost 200 hours and still works great. However, I have to clean out wet grass from under the deck occasionally. I really like the hydrostatic transmission. I'd prefer that the engine didn’t automatically stop whenever I leave the seat, but that’s typical of government regulation,” Wes Suddarth, Lebanon, Tenn,; “It has 104,000 miles with very few problems,” reports Wes, pleased with his 1981 Ford F150 4-WD pickup equipped with a 300 cu. in. 6-cyl. engine. “My total repair bill over 12 years has been less than $400 (water pump, starter, new brakes, etc.). “My 1992 Bush Hog 15-ft. rotary cutter is easy to maintain and works great.”
Charles H. Ries, Shellsburg, Iowa: “This is the worst manure spreader I’ ve ever seen,” says Charles, owner of a 1986 New Idea 213 model. “The second load we hauled one of the big rear wheels fell off with the spreader loaded. The beater drive chain is built too lightand the unloading chain keeps breaking. Chain guides on the unloading chain have worn through and much of the tin is rusted out. “My 1990 Ford F-150 4-WD pickup has lots of power and does a good job of pulling our livestock trailer. It handles well. However, it could use a slower reverse gear.” Victor Kimberling, Mechanicsville, Iowa: Victor's impressed with Rawson’s one-passzone-till planting system (Rawson Farms, 7413 North Nottawa Road, Farwell, Mich. 48622) that consists of a pair of 2-in. fluted coulters mounted on a toolbar at the front of a planter, one mounted on each side of the row. One coulter is positioned a few inches ahead of the other. The two coulters till a strip 6 in. wide through otherwise undisturbed residue. “The coulters have a rugged design and work as well as advertised. I had the opportunity to listen to Ray Rawson and Don Schiefer, an agronomist, explain the system and dynamics of crop growth. I received Schiefer’s book “Tillage in Transition” recently as an unannounced 14° FARM SHOW tS bonus after the purchase. This approach of continued service and further education of customers is refreshing.”
John Vosta, Milford, Neb.: John’s happy with his 1990 Ford F-150 4-WD pickup. “I’ve owned this pickup for 18 months now and it has never been in the shop. It didn’t even have any minor problems that usually occur with a new vehicle, It has 20,000 miles on it now.”
William Grindey, Apple River, Ill.: “My 1987 General Motors 1/2-ton 4-WD pickup was a piece of junk from the day I bought it. The 305 cu. in. fuel injected engine never did start or run well. It went through two starters, the ring gear and head gasket had to be replaced, and the paint job was terrible, Neither the company nor the dealer were very helpful. I traded it for a 1988 Ford F-150 4-WD equipped with a 302 cu. in. engine. It burned too much oil, but between the company and the dealer the problem was fixed. It’s surprising what a dealer can do for you if they want.”
Randy Roquette, Baldwin, Wis.: Randy likes his 1985 Ford F-150 4-WD pickup equipped with a 300 cu. in, engine and 4speed transmission,
Robert Winters, Strasburg, Penn.: “My 1989 Ford F-150 4-WD pickup handles —well, but gets only 10 to 12 mpg.”
Duane Forslund, Hawarden, Iowa: Duane likes his Allis-Chalmers 782 chopper. “Excellent reliability, low maintenace cost, good performance and capacity.” Leland Klinger, Pecatonica, Ill; Leland has had bad luck with his 1986 Ford F1504-WD pickup. “Once you start it, it dies three or four times before you can even move it unless you hold the throttle half open. It’s totally dead going uphill and has no power atall. The XL trim fell off before the pickup had 3,000 miles. The dealer replaced it but the new trim also fell off, It gets only 8 mpg. I bet I' ve been to the dealer 20 times to solve the problem, but so far all they’ ve done is set the timing. asked them to look at the transmission, which slips constantly, and install a new carburetor, but they did nothing except wait for the guarantee to run out and it did. put on 5,000 of the first 6,000 miles going to the dealer - 60 miles round trip.”
Ford Ranger pickup
39 Best Buys8 Worst Buys“I’m very pleased with my 2011 Ford Ranger pickup. I bought it in 2014 with only 3,100 miles. It now has 103,000 miles with only preventative maintenance. It’s my daily vehicle and I only use my 1999 Chevy Silverado with 104,000 miles for pulling trailers.”
“My Ford Ranger pickup has been easy on gas and trouble-free for all of its 15-year life.
“My Dixon 46-in. cut lawn mower is 3 years old and has been trouble-free. It’s easy to start and is an easy ride for my 85-year-old body.”
“It’s the best pickup I’ve ever owned,” says Robbie about his 1996 Ford Ranger with more than 300,000 miles on it. “I can easily maneuver this pickup into tight places, and it does a great job of pulling my trailer. But what I like best is that the bed sides are low enough to reach over and grab items.”
“My best buy is my Big John 25-gal. boomless ATV sprayer (www.bigjohnmfg.com; ph 800 658-4471). “It has electronic controls and can cover lots of ground fast.
“The 1975 Ford Ranger pickup my wife inherited just keeps on going, with good fuel economy and very few repairs. It’s old so it looks pretty rough, but it does what we want.”
“It’s the best vehicle of any kind that I’ve ever owned,” says Jimmy about his 2001 Ford Ranger. “It has about 286,000 miles on it with very few problems and still looks and drives great.”
“Our 2003 Ford Ranger pickup works great. We previously owned two Rangers, a 1993 model and a 1999. Both were used hard and ‘kid’ driven. Too bad the company quit building them.”
“I like my 2013 Ford Escape 4-WD, 4-door crossover vehicle. It’s equipped with an EcoBoost 4-cyl. engine that has a lot of power and gets 26 to 27 mpg. It’s easy to get in and out of and is a quiet ride.
“My 2008 Ford Ranger pickup has a powerful 4.0-liter engine and handles well.”
“I bought a used 1994 Ford Ranger pickup equipped with a 4-cyl. engine. It had about 155,000 miles on it and used one quart of oil every 2,200 miles. Then I started using Slick 50 engine treatment in it, and now it has more than 315,000 miles on it but only uses one quart of oil every 7,000 miles. I’m not a dealer for Slick 50. It just works for me.”
“My 2003 Ford Ranger pickup has about 262,000 miles but still runs and looks like new. It has required only routine maintenance.”
“My 2003 Ford Ranger pickup has more than 250,000 miles on it but still runs great and looks good. I think it’ll go another 250,000 miles. My two Ford 1100 tractors are both best buys. I’ve had one of them for 20 years now.”
“Six years ago I regarded my Ford Ranger pickup as my worst buy. However, after I got everything fixed it became my best buy. I bought this pickup with about 85,000 miles, and it now has about 200,000 trouble-free miles.”
“I like my 2011 Ford Ranger pickup equipped with a 4-cyl. engine and manual transmission. It looks nice and is twice as fuel efficient as the Dodge pickup I previously owned.
“My Harbor Freight chainsaw grinder does a good job on chain sizes ranging from .325 to .404.”
“I have a 1991 Ford Ranger pickup with 314,000 miles. I bought it with 302,000 miles on it for $100. All I’ve done since is routine maintenance. It’s one of my best buys ever.”
“My 1994 Ford Ranger has more than 302,000 miles on it, yet the engine hasn’t been touched.”
“I’m well pleased with my 2009 Ford Ranger pickup. It gets about 35 mpg.”
Marshall’s pleased with his 2006 Ford Ranger pickup equipped with a 4-cyl. engine, 5-speed transmission, air conditioning, and power steering. “This pickup cost about $11,000 new. It averaged 32 mpg on a recent trip to California and averages 25 mpg around town. No problems.
“The choke has never worked right on my 2005 Yamaha 9.9 hp, 4-stroke outboard boat motor. Three dealers and $400 haven’t solved the problem.”
“My Grasshopper 729 zero turn riding mower performs as well as advertised. It cuts at high ground speeds and does a good job. It’s also easy to service.”
He’s disappointed with the fuel economy on his 2010 Ford Ranger pickup. “This pickup doesn’t even come close to advertised fuel economy. It’s lucky to average 22 mpg, whereas the company advertises 29 mpg.”
“My 2008 Ford Ranger is a nice handling pickup. It gets about 23 mpg on the highway which I think is pretty good, and it has a comfortable ride.”
“My 1999 Ford Ranger pickup has more than 170,000 miles on it but still runs great and has the original battery and exhaust system. I’ve replaced only the tires, brakes, belts, and shocks.”
“We’ve driven Ford Ranger pickups since 1993 including 1990, 1999, and 2003 models. We bought two of the pickups used and one new. They’ve had very few problems and are easy on fuel.”
“I bought my 1995 Ford Ranger pickup used in 1966 and it still runs great. I’ve used it for a lot of hard jobs and it has performed way beyond my expectations.”
“My 2005 4-WD Ford Ranger is my best buy. I bought it to replace a 1988 Ranger that had about 235,000 miles on it. I like the mid size of the Ranger. It has plenty of power, rides well on and off road, and is fuel efficient.
“Goodyear tractor tires are my worst buy. I’ve never worn out a Goodyear tire. They always fail long before old age sets in.”
“I like my 2000 Ford Ranger quad door 4-WD pickup, which I bought used about 1 1/2 years ago. I really like Ford Rangers. I’ve owned three of them since 1988 and all have been dependable. They’re all equipped with V-6 engines and 5-speed transmissions, and they all average about 19 mpg, which I think is pretty good. We live out in the country so most of the time we drive on dirt and paved roads, not freeways.”
“My 1992 Ford Ranger pickup, which I bought used, is fuel efficient and requires very little maintenance. It always starts and is easy to service. It’s not a big power house machine, but it gets me where I want to go. I just purchased a used 1998 model and hope to get the same service from it.
“The Lenox gas furnace we bought new in 1998 has caused us nothing but trouble. It’s extremely noisy. The dealer has been out three or four times but can’t seem to fix it. It came with a five-year warranty, but the warranty covers only one year on labor. The warranty has expired now, so it’s time to either start repairing it or replace it.”
Charlie’s impressed with his three Murray MTD riding mowers. “These machines are well-built and easy to maintain. They’re equipped with Tecumseh engines which require very little maintenance. Parts for them are readily available.
“I own three Ford Ranger pickups - years 1987, 1996, and 1999 - and they’re all best buys. They’re dependable, fuel efficient, and well-built.
“My Ryobi 18-volt cordless drill is my worst buy. The problem is that the chuck doesn’t hold the bits tight. Also, the batteries lose their charge too soon.”
Madeline’s the proud owner of a 2003 Ford Ranger pickup. “We’re now driving our third Ranger and we’ve loved them all. They’re fuel efficient. It also has comfortable seats, high and low 4-WD, and fog lights. I like the Ford blue colors. We’ve found that going with minimum trim works best in this area because there are fewer places for salt to ‘catch’ during the winter. Also, it makes the pickup easier to wash.”
Cliff likes his Menards garden cultivator. “The cast metal on it isn’t very durable, but it works good for working grass seed into thin turf. This cultivator is a ‘knock-off’ of another commercial model.
“My 1996 Ford Ranger pickup equipped with a 4-cyl. engine and manual transmission is a best buy. It had more than 350,000 miles on it, and if I hadn’t forgot to replace the timing belt I’d still be driving it.”
“My 2000 Ford Ranger pickup never got more than 16 mpg so I took it back to the dealer. They said nothing was wrong with it. I removed the air cleaner and found the area behind it was stuffed full of cloth fibers. I thought removing them would solve the problem, but it only got worse. I finally traded it even up for a 1998 Dodge Ram 4-WD pickup. It was the best trade I ever made.”
“My 1991 Ford Ranger pickup is my best buy. It’s a small pickup but does a great job and has more than 100,000 miles on it. I’ve spent less than $150 on repairs and it still has the original battery. It sits outside all the time but never fails to start.
“My 1993 Chevrolet 4-WD Blazer is my worst buy. I’ve had to spend more than $4,000 for repairs. It has had three different batteries and has had to be towed three or four times. I can’t depend on it and, as far as I’m concerned, it’s a piece of junk. It has had two recalls for bad brakes, and now the gas tank leaks. I’ve always kept it inside a garage.”
“I like my 1991 Ford Ranger pickup equipped with a 4.0-liter, V-6 engine and 5-speed transmission. It has more than 157,000 miles and has required very little maintenance. I use it often to pull a 16-ft. trailer loaded with antique gas engines. No problems.”
“I had virtually no problems making 1,200 bales last season,” says Donald, pleased owner of a 1998 Vermeer L big round baler. “I traded a 1993 Super J for it. The Super J was a good baler but the L makes heavier bales with less stress on the operator. That’s important to me because I do custom baling and my baler has to run.”
Donald’s worst buy is a 1987 FordRanger pickup equipped with a 4-cyl. 2-liter engine and 5-speed transmission. The first year, mileage was a fair 20 to 24 mpg. Then it dropped to 16 to 18 and had no power. I ran it to 113,000 miles and traded it for a 1980 Chevy 1/2-ton Scottsdale just to be rid of it.”
“My worst buys are two Black & Decker 3.7-in. drills. They look good but don’t work.
“My 1987 Ford Ranger is neither a best nor a worst buy. It’s a good pickup, but I’ve had to have it towed in several times. The problem is that the coil goes dead and has to be replaced. Another problem is that the brake discs are too light and warp, causing a pulsating effect when they’re applied.
“My best buy is my 1993 Mercury Grand Marquis LS car. I had to replace a set of electric wires for $126. Otherwise, no problems. It gets 25 mpg and has a comfortable ride.”
Kelly nominates his 1988 Ford Ranger extended cab 4-WD pickup as his “worst buy”. “At 25,000 miles it quit running. The company replaced the main computer, changed the oil, and checked the fuel injectors after fuel washed into the oil. I was able to drive it only about 150 miles before it quit again. The company had to make the same repair three more times at a cost of about $700 each time, but they still couldn’t find the problem. The starter rusted through and I had to replace it. “The last time the pickup quit I refused to drive it any more. The spark plugs, wires, fuel injector, and filters were replaced. Then the service manager drove it for about 150 miles until it quit running again. He finally found the problem - a resistor in the wiring harness was causing the computer to malfunction. I sold the pickup and two weeks later I received a phone call from the new owner. He asked if I’d ever had problems with the pickup. He was already on the second transmission.” On the “best buy” side, he lists his 1990 Kubota HST 1750 4-WD tractor equipped with a front-end loader. “I use it to clean out my heifer and hog barns, to level my yard, and to cut four to five acres of grass around buildings. It has about 2,000 hours on it but has needed only regular maintenance. I’m well satisfied with it.” Wayne Zimmerman, Joy-Way Farm, pickup, but it won’t be my last.”
Tim likes his 1996 Mazda B2300 shortbed pickup. “I can’t remember enjoying driving any vehicle this much since I was 18 and had a sports car. The only problem is that my wife and daughter always want to drive it, too. It gets 35 mpg. “My 1986 Ford Ranger pickup equipped with a 2.9-liter 6-cyl. engine and automatic transmission is my worst buy. I bought it used and it now has about 140,000 miles. I’ve owned it for four years and have had to replace the transmission every year.”
“We bought an International806 tractor in 1970 with 2,000 hours on it. We’ve put a new clutch on it and we overhauled the engine at 8,000 hours. It now has about 11,000 hours on it but still runs better than some of our newer tractors. “We bought a 1992 Ford Ranger pickup equipped with a 4-cyl. Mazda engine and it’s a worst buy. The engine used about a quart of oil every 1,000 miles when it was new and it never got good gas mileage. At 60,000 miles we traded it off.”
William nominates his 1995 Ford Ranger extended cab 4-WD pickup as his “best buy”. “This is my second Ranger. The first one was perfect - not one problem with it. So far this one has worked perfect, too.” On the “worst buy” side, he lists his 1995 Northern Hydraulics pressure washer. “It’s supposed to deliver 1,500 psi, but instead the pressure constantly fluctuates between 500 and 1,000 psi. It’s not a dependable machine, although the 5 hp Briggs & Stratton engine runs good.”
The front hubs on his 4-WD 1994 Ford Ranger pickup failed at 41,000 miles, just after the 36,000 mile warranty expired. “They should not have failed so soon, especially since the truck is used primarily for highway driving. I don’t abuse it at all. The dealer ended up paying $500 of the $1,000 repair cost, but I think Ford should have paid for the whole repair since it was obviously a manufacturing defect. I’ve been told this is a widespread problem with this model.”
Art Thomas, Stryker, Ohio: Art says his 1992 Ford Ranger pickup equipped with a 4-cyl. engine and manual overdrive transmission has turned out to be his “best buy”. “I traded my 1985 Ford Ranger pickup equipped with a 6-cyl. engine and manual overdrive transmission for this pickup. At first I was disappointed with the 4-cyl. engine because it didn’t have enough power in overdrive and was less fuel efficient than the 6-cyl. engine. However, as the miles added up, it became more powerful and fuel efficient, and now at over 8,000 miles it has good power for a 4-cyl. engine and gets up to 30 mpg on long trips.”
Tom Reuter, Monticello, Iowa: Tom’s impressed with his 1991 Knight 712 manure spreader. “Does a nice job of spreading a variety of types of manure. I use it for liquid as well as solid and packed manure. No problems. It’s built heavy and shows no wear after almost two years of use. “My 1992 Ford Ranger pickup has plenty of power and is fuel efficient. Rides smooth. No problems.”
Edwin Ruff, Moses Lake, Wash.: Edwin's 1986 Ford Ranger pickup equipped with a V-6 engine and automatic transmission rates as a “best buy”. “It has almost 100,000 miles but still gets 18 plus mpg in town and up to 26 mpg on the highway. It still looks and performs like a champ.”
Marvin Dranselka, Wayne, Neb.: A 1991 Ford Ranger extended cab pickup equipped with an automatic transmission and 4-liter engine heads Marvin's “best buy” list. “It’s the quietest pickup I’ ve ever owned, It gets good gas mileage and the 4liter engine works great.” He says Crow’s seed cor is also a “best buy”. “It's competitive both in quality and price, and it’s family owned which is a big plus.”
Robert Samuelson, Puryear, Tenn.: A 1991 Ford Ranger extended cab pickup equipped with a 4-liter V-6 engine and automatic overdrive transmission is Robert's “best buy”. “It rides and handles well and gets good mileage. The only thing I don’t like about it are the Firestone tires, Three of them went flat after only 500 miles when stones punched holes in them, hauled the tires 70 miles to a Firestone store, but the manager wouldn’teven touch them because they weren’t purchased in his store, Firestone’sconsumer affairs department said Icould return the bad tires and pay half price for new ones. That didn’t seem like a good deal to me. Now I'm using tires purchased from my local co-operative. I've had no problems with them.”
Jim Tepool, Poseyville, Ind.: Jim’s had good luck with his 1990 Ford Ranger pickup equipped with a 4-cylinder engine and 5speed transmission, “I put 20,000 miles on it in the first seven months. Once I left the dealer’s lot I never had to go back.”
Edward Borkowski, Claysville, Penn.: Edward's 1987 Ford Ranger pickup has 92,000 miles and is a “best buy”. “The 2.3liter turbocharged diesel engine runs good and gets 32 mpg. It easily hauls a 1-ton payload. However, the oil filter for it costs $25. If someone knows of a less expensive brand for use on this pickup I'd like to hear from them.” John deBoer,
Pat Slaney, Lone Rock, Wis.: “My 1984 Ford Ranger pickup equipped with a 4cylinder engine and 5-speed transmission is a best buy. It has 250,000 miles but still has the original engine. All I’ve replaced are the ( lr, ¢). FARM SHOW «- 13 Best & Wo ( valves, battery, and alternator, It still runs and starts good without using any oil between changes,”
Bob Jessup, Winter Park, FL: “No more Black & Decker tools for me,” says Bob, disappointed with his “worst buy” Black & Decker 3/8-in. electric drill. “The chuck wasn’ ttrue which caused the drill bit to flop. I replaced it with a Sears 1/3 hp 3/8-in. drill which works great.” Bob's happy with his 1989 Ford Ranger long bed pickup equipped with automatic overdrive and 4-cylinder dual ignition. “It rides and handles great, gets 22 to 24 mpg, and is real peppy.” He also likes his 1985 Ford F-150 6cylinder pickup. “It has 130,000 miles and has never been in the shop. It still doesn’t use any oil.” Howard Cuddeback, Skaneateles, N.Y. “It does an excellent job of cutting hay or rye in all weather conditions and works at speeds up to 10 mph,” says Howard, pleased ownerofa 1989 Vicon KM 281 disc mower. “Vicon backs up its product line better than any other company.”
Harlan Hartzahn, Greene, Iowa: “My 1988 Case 1818 skid steer loader is a best buy. I also have a 1969 Chevrolet C-50 truck with 540,000 miles that’s a best buy. On the negative side, “My 1988 Ford Ranger pickup isalemon. I boughtitslightly used from a local dealer and sent $100 to Ford for the warranty transfer. Then the problems began. I told Ford I'd paint it lemon yellow if they wouldn't fix it After 16 trips to Ford dealers (and many calls to the company), I traded it in for a 1990 Ford Ranger. It's had a few problems, but they seem to take care of it, It seems that if you take the pickup to anyone but the dealer you bought it from, you're out of luck. I've owned many Fords, but this one might be my last.”
Ford 8N tractor
23 Best Buys1 Worst Buy“My Husqvarna 54-in. mower with a 24-hp Kohler engine is easy to use. It has an adjustable ride seat, or you can stand on the deck. It’s every bit as good as the 48-in. I got around 2010. I help with the church’s 5 acres and mow my 1 1/2 acres. It’s pretty thirsty, though.
“Any and all of my Echo yard equipment are best buys. My weed whacker is probably 20 years old, and it still starts right up.
“My Ford 8N is 75 years old and runs like new, but it needs a paint job.
“The secret to most anything is taking care of things.
“I love your magazine.”
“My absolute best buy has to be my 2009 Cub Cadet Z Force zero-turn 22-hp mower. It has served me well over the past 16 seasons, with only two idler pulleys and belts needing replacement, and the PTO clutch and PTO switch replaced just last year.
“Another great buy is the 1952 Ford 8N I purchased in 1989. It’ll start in the coldest weather when my utility diesel tractor won’t. I still use the 8N for plowing and discing each year to prepare my garden. I also rely on it for a lot of the snow removal.
“My worst recent purchase is a Harbor Freight solar LED motion-detection light. I bought it in December. It worked for a while after installation, but now it won’t turn on at all. I’ve bought many things from them over the years and had good luck with most, but this light was a waste of money.”
“My 1999 Deere 5310 tractor with a 521 loader has over 2,000 hrs. on it and barely requires anything beyond routine maintenance. It runs great on dirt-cheap waste oil fuel. This was my sole machine for a long time, and it’s had a hard life, but it’s still running. It starts well in cold weather. It’s been a great tractor.
“My 1949 Ford 8N with loader is over 70 years old and does its job. It’s so easy to work on. I wish tractors were still made with this simplicity and quality. Parts are cheap for it.
“I’ve bought several Walmart EverStart 12-volt car batteries. They only last just over the warranty (about one year) and corrode badly. I would spend the extra money on a different battery.”
“My Ford 8N was a best buy despite a couple of limitations. It didn’t have live power and was only a 5-speed transmission, so stopping power and speed were limited. I sold it to purchase a Deere 2010 tractor with live power. With live power, the mower can be engaged or disengaged safely with little effort. My wife and 11-year-old granddaughter can now mow our driveway and road ditches with a brush hog mower easily and safely. Another feature is the Deere has eight forward speeds and three reverse. Plus, my granddaughter says, ‘It’s a cool looking John Deere.’
“On a recommendation from a relative, I purchased a new Husqvarna chainsaw. Hands down, it became my worst purchase ever. On the first tank of gas, the piston tore up the motor, and we couldn’t find parts. The dealer told us that because it was a closeout, he couldn’t honor the warranty, and a boat anchor was created. When I called, the company wouldn’t even listen to my problem. Thank goodness I have several newer and old Stihl chainsaws to save the day.”
“My old 1952 Ford 8N is still working for me. It mows my 3-acre lawn and gets firewood out of the woods.
“In 2011, I bought $888 worth of Empress Splendor hybrid trees that were featured in FARM SHOW. They’ll never amount to anything. I don’t think they’ll ever even make decent firewood.”
“My father bought me a 1948 Ford 8N with a plow for my 16th birthday. In our extended familiy we bought a total of four 8N’s. Because of price restrictions, dealers made you buy some associated items. So each family purchased an item and we shared them, such as a belt pulley, terrace blade, and so on. Great tractors.”
“Several years ago I bought a used 1952 Ford 8N tractor with implements for $3,000. The engine was smoking badly so I rebuilt it. Ever since then I’ve been using this tractor to retrieve firewood to heat our house, and to till our garden and mow our lawn. It’s a great old tractor.”
On the “worst buy” side, “In 2011 I bought 110 Empress Splender trees from World Tree Technologies, Inc., which I read about in FARM SHOW. I paid $888.25. These trees are supposed to grow fast into marketable timber but most of mine didn’t even survive. I doubt the survivors will amount to anything.”
Edwin’s best buys are a 1952 Ford 8N tractor he purchased used in 1990, and a 1962 Chevy pickup purchased used 42 years ago. “Both have been great buys and are still in use. No computers on either one. I do my own repairs and maintenance. I’m 82 years old and believe in regular maintenance including oil changes and grease jobs.”
“My 1939 Ford 8N tractor is a real workhorse. I use it to mow and to haul rabbit manure in a carry-all device that I made to go on back of the tractor. I often take this tractor for a cruise around my rural ‘block’ for an evening drive. Best money I ever spent. My stepdaughter helped me restore the tractor, and those hours spent with her were priceless. Now she shows Ford 2N, 8N, and 9N tractors at shows during the summer.”
“The 1952 Ford 8N tractor I bought used in 1972 is my best buy ever. This tractor still doesn’t use any oil and has the same rear tires that it had when I bought it. I’ve always kept the tractor inside a shed whenever I wasn’t using it.”
“Last summer my 30-year-old Deere 16-in. chainsaw finally quit working. I was told it was built by Echo, so I bought a 2013 Echo CS-352 chainsaw. So far it has performed just as well as the Deere.
“I still use my 1991 Dodge 250 as my everyday pickup.
“My 1951 Ford 8N is my new tractor; my 1946 Deere B is the old one.”
“My 1991 Dodge 2500 pickup equipped with a Cummins diesel engine just keeps going and going, as does my 1952 Ford 8N tractor. I also like my Drill Doctor drill bit sharpener. It works great and saves money, too.
“My 2002 Deere L100 42-in. riding mower equipped with a 17 1/2 hp engine quit starting without help after one season of use. The dealer said the compression release had broken so they replaced the engine at no charge, but they also billed me $80 for cleaning, greasing, and leveling the mower deck. The engine started okay for a couple of years but now it’s having problems again. I won’t buy another Deere riding mower.”
“Recently one of your readers complained that his Ford 8N tractor fouls a lot of spark plugs. My Ford 8N does the same thing but I found a way to solve the problem. A friend told me to start putting fuel oil in the gas, about one ounce per gallon. After about three months I noticed good results. In the past, the carburetor needle would always stick and gas would flood the carburetor and gas would run onto the ground. I had to shut off the gas line valve every time I shut the tractor off. Now I don’t have to do that any more. It very seldom fouls plugs and it also starts a lot better. I also use the same mixture in my Farmall H and Oliver 88 tractors, with good results.”
“My Ford 8N tractor is my worst buy. We had to buy more spark plugs for it than you could ever imagine. Does anyone know what causes this problem?”
A 1969 Chevrolet 1/2-ton pickup equipped with a 6-cyl. engine and manual transmission rates as Cullen’s “best buy.” “I bought it used in 1971. It has performed beautifully with hardly any breakdowns and is still going strong. I use it to haul seed, fertilizer, firewood, etc. It’s a cheap form of transportation in these days of high gas prices.
“My 1952 Ford 8N tractor is still going strong. I use it almost every day, especially for gardening work.”
“My 1952 Ford 8N tractor is my best buy of all time. This tractor can handle just about anything and does everything I expected it to, and more. It’s a fun tractor to operate and is an all-around awesome machine.
“My 1992 Chevrolet 1500 pickup is the biggest piece of junk I’ve ever owned. Just about everything on it has gone wrong. Right now it’s out of service so I have to drive a van. As a result I can’t haul anything and I hate that. I guess the saying ‘You get what you pay for’ really is true. I want to see what a real truck is like, so I’ll probably buy a 1997 Ford F-250 Diesel Power Stroke equipped with an 8-ft. bed. I’ll never buy a Chevy again. I’ve always been a Ford man and now I know why.”
“I like my 1952 Ford 8N tractor. I bought it used in 1996 and haven’t had any problems with it. It’s a pleasure to operate.
“My 1998 Troy Bilt trimmer/mower is my worst buy. I’ve had problems with it from day one. The string wouldn’t stay on the head and the head wouldn’t stay in one place. The cast aluminum case is corroding and I can’t do anything about it. It’s powered by a 6 hp Briggs & Stratton gas engine which is the only good thing about it.”
A 1948 Ford 8N tractor rates as Jon’s “best buy” ever. “It does all the work I need it to do. I use it with a manure spreader, 2-bottom plow, 6-ft. 3-pt. disk, small snowblower, 8 by 4-ft. wagon, and a Bush Hog. This tractor was well designed for its time. It would be nice to have a little more power and a live pto. I added lights on front and back and also added a straight drawbar. And I built a frame on front of the tractor so that I could mount a 7-ft. snow plow on it. The frame can easily be detached when I don’t need the snow plow.”
“One of my best buys is my Ford 8N tractor. It runs as good as new and looks like new, too. This 8N could easily work day after day, but it doesn’t have to. Just owning it brings back memories of old machinery, old ways of doing things, and people that were good to me when I was growing up. I feel lucky to own this 8N.”
“We’re well satisfied with our 1952 Ford 8N. I wish they’d continue to build a simple, economical tractor like this.”
“It’s the greatest tractor ever built,” says Alton about his 1952 Ford 8N. “The only improvement that could possibly be made is to install power steering, which they didn’t even have on tractors in those days. I ordered a Sherman up-down transmission for the tractor so I’d have a creeper gear for tiling.”
Mel Kastella, Whitefish, Mont.: “The Ford 8-N tractor I bought used is like the Energizer bunny - it just keeps going and going and going, [use it to plow, cultivate, and clear snow. It also works well with my 5-ft. Bush Hog. It’s simply the best piece of farm equipment I’ve ever owned, “T wouldn't call it my worst buy, but my “At 15,000 miles the engine began to cut out. The dealer said the distributor cap was full of white chalk.” 1993 Chevrolet /2-ton pickup is certainly the most perplexing. At 15,000 miles the engine began to cut out, I took it back to the dealer and they put in an updated computer chip and replaced the distributor cap They told me the cap was full of white chalk. I'd never heard of such a thing.”
Robert J. Brown, Vineland, N.J.: “Our best buy of all time is a 1950 Ford 8N tractor, My father purchased it new so I grew up with it. I still use it on my farm today. It’s semi-retired but can still put in a day’s work when it has to. I let my Deere 4030 tractor do the heavy work.”
Paul Leavengood, Fresno, Ohio: Paul’s “worst buy” is Lenco lightning rods purchased in 1990, “I had them installed on two barns and then had to spend $2,000 to fix all the holes in the roofs, “I bought a set of four General car tires in 1990 and got about 5,000 miles out of them before they all blew out or went flat. The dealer wouldn't do anything about the problem, “My 1988 Morton 42 by 105-f1. machinery shed is a best buy. The company did exactly what they said they would do. It was a quality operation all the way. I'd recommend them to anyone. “My best buy of all time is a 1950 Ford 8N tractor, Ithas over 20,000 hours, but has “It has over 20,000 hrs. but has only been overhauled once. We use it every day.” only been overhauled once. We use it every day. The $1,000 I spentto buy itnew was the best money I ever spent.”
Ford F-350 4-WD dually pickup equipped
16 Best Buys4 Worst Buys“I’m well satisfied with my 2016 Ford F-350 4-WD dually pickup equipped with a diesel engine. I work in the construction business and use this pickup every day to pull trailers. No problems.”
Duane’s satisfied with his 2006 Ford F-350 4-WD crew cab pickup equipped with a 6.0-liter diesel engine and an 8-ft. bed, which he bought used with about 99,500 miles.
“I had to replace the oil cooler and the turbocharger needed work, but overall I love this pickup’s power and ride. It’s fun to drive as long as I don’t have to park in tight spaces. The crew cab is wonderful and has plenty of room for my hand tools and parts. And as a contractor, I have a lot of tools and parts to carry.
“My wife and I bought a Sears Craftsman 42-in. riding mower equipped with a 19 1/2 hp engine and hydrostatic transmission. I like not having to stand on a foot pedal to keep moving. Instead, I just put my feet on the floorboard and use the clutch only as a panic button.
“All I’ve done is change the oil, blades, drive belt, battery and recently the starter solenoid. I think ethanol is bad for small engines, but that’s almost all I’ve used in this mower yet it always starts right up. The only problem is that its ground-driven belt seems to wear out and slip prematurely. If the company had used the same hydraulic drive transmission that IH uses in its Cub Cadet tractor, this would be a fantastic machine.”
“I bought my 1980 Dodge D150 4-WD pickup used in 1990 with about 45,000 miles, and I drove it until 2010 with no problems.
“I bought my 2004 Ford F-350 4-WD pickup used with about 58,000 miles. The 4-WD never seems to work when there’s snow or wet weather. The pickup runs good otherwise but the 4-WD is a big problem. It now has about 118,000 miles on it.”
“My 2004 Volkswagen Golf TDI-equipped with a diesel engine and 5-speed transmission gets 42 to 50 mpg. It has about 98,000 miles on it with no problems.
“Two years ago I bought a used 1995 Ford F-350 4-WD dump truck equipped with a 7.3-liter diesel engine with about 70,000 miles on it. It’s a sharp looking truck with a lot of power. A great buy.
“My 1995 Ford F-250 4-WD extended cab pickup started using oil at 35,000 miles. It gets only 9 to 11 mpg, and less when pulling a trailer. Also, the front end requires a lot of maintenance.”
A 2004 Ford F-350 4-WD pickup equipped with a 6-liter diesel engine rates as Kay’s “worst buy”. “The circuit board went out at about 40,000 miles. At about 80,000 miles the intake manifold failed, and the EGR valve went out. The fuel injectors also failed. It cost more than $3,000 to fix. We have a 1995 diesel-powered Ford F-350 with about 280,000 miles, and a 1996 diesel Ford F-350 with about 320,000 miles, so we were pleased with our first two Ford pickups. But after this problem with the 2004 model, we’re done buying Fords.”
“I own a 1997 Ford F-350 4-WD pickup equipped with a turbocharged 7.3-liter diesel engine. The 4-WD has been an expensive disaster. Early on the gear shifter, ball joints, and 2 universal joints on the front axle had to be replaced, and repairs had to be made to the Warn wheel hubs. The total repair cost was about $2,000. Otherwise this has been a satisfactory vehicle with very little body rust.”
“Our 2002 Ford F-350 4-WD pickup equipped with a 7.3-liter diesel engine is our best buy. It has custom toolboxes that replace the original bed (Manning Equipment, Lytle, Texas ph 214 649-7438). This pickup has about 200,000 miles on it but still runs as good as when I bought it. The toolboxes have paid for themselves just by keeping my tools in one place. No more searching in the bottom of a toolbox for tools.”
Darrell’s “well pleased” with his 2007 Cat-erpillar 470 combine. “This combine is easy to work on. I had a small problem setting the machine, but the dealer helped me by phone to fine-tune the settings.
“My 1999 Ford F-350 4-WD pickup, which I bought used, is my worst buy. It had about 20,000 miles on it when I bought it, but 10,000 miles later the transmission went out which cost me $4,000. The transmission repair shop told me Ford doesn’t build its transmissions heavy enough.”
“I like my 2001 Ford F-350 4-WD pickup equipped with a 7.3-liter, Powerstroke diesel engine and 6-speed transmission. It easily pulls my 24-ft. Norbert triple axle cattle trailer, which is also a best buy (Norbert’s Mfg. Ltd., Glenboro, Manitoba, Canada ph/fax 780 853-4406). We’ve used it to haul more than 1,000 head a year without a single problem.”
“This truck is awesome. It’s the best I’ve ever owned,” says Scott, impressed with his 1999 Ford F-350 4-WD pickup equipped with a Powerstroke diesel engine. “My pickup had some aftermarket work done to it so it really runs good. Whenever I pass people on the road they always look, because my truck is really loud and sounds like a jet plane. It’s an excellent truck.”
“It’s very reliable, has a lot of power, and is as comfortable as many luxury vehicles,” says Larry, happy with his 2002 Ford F-350 4-WD crew cab pickup equipped with a Power Stroke diesel engine.
“The company I work for bought a 2001 Ford F-350 4-WD pickup for my use and I’m not impressed with it. This pickup is so high and hard to get into that I lost 36 lbs. in just six months. It’s much better than any diet I’ve been on. It’s also underpowered and gets stuck easily.”
Kiley nominates his 2002 Ford F-350 4-WD dually pickup as his “best buy”. “It has a lot more power than the 2001 Dodge 4-WD dually pickup I previously owned. I haven’t had a bit of trouble with it. I use it to pull a 32-ft. trailer loaded with 15 round bales and can go down the highway with the cruise control set at 75 mph. I love this truck. When it comes to pickups I’ll never buy anything but Ford.
“My 2001 Dodge 4-WD dually pickup equipped with a high output Cummins diesel engine and 6-speed transmission is my worst buy. I bought the pickup new, but it fell apart before it had even 9,000 miles on it. The dealer had to install a new windshield, headliner, and complete front end including rotors and tie rods. The biggest problem was that as soon as the engine reached 2,500 rpm’s it ran out of power. It couldn’t even pull a 20-ft. livestock trailer down the road at 60 mph. I finally traded it in for the Ford F-350.”
Lynwood likes his 1997 Ford F-350 4-WD pickup equipped with a 5.7-liter engine and 5-speed transmission. “It has only about 12,000 miles on it but I like what I’ve seen so far. It’s well built and averages about 13 mpg empty. My only complaint is that the seat is uncomfortable.”
“It has unbelievable power, whether it’s running on the flats or going over passes at 11,000 ft.,” says Pete about his 1997 Ford F-350 4-WD pickup equipped with a Powerstroke engine and 5-speed transmission. “It doesn’t seem to know what a load is. The Crew Cab makes it as comfortable to ride in as any car.”
“It has more than 350,000 miles on it and is still going strong. I’ve never even had to open up the engine,” reports Larry about his 1990 Ford F-350 4-WD pickup equipped with a 7.3-liter engine, 5-speed transmission, and manual hubs for switching to 4-WD. “I use it every day to pull a 20-ft. livestock trailer and also a 24-ft. flatbed trailer. The loads average 16,000 lbs. with the livestock trailer and 24,000 lbs. with the flatbed trailer. It’s a great truck.”
A 1996 Ford F-350 4-WD diesel pickup heads Doug’s “worst buy” list.
“It was so noisy it was unpleasant to drive. I got rid of the truck with only 20,000 miles on it. Two months later, I was contacted by the new owner to see if I’d had any problems with it. Seems the engine block cracked at one of the main bearings (a weak point in the Powerstroke engines). Ford was trying to get out of fixing it by saying that because the truck wasn’t serviced by a Ford dealer, there was no warranty.”
A 1996 Ford F-350 4-WD pickup equipped with a 7.3-liter Power Stroke diesel engine and 5-speed transmission rates as Martin’s “best buy”. “We sell farm equipment and use the pickup to pull a triple axle trailer. It has 20,000 miles on it with no problems. I like the Power Stroke engine - it lets me pull loads weighing up to 18,000 lbs. at 70 mph on the freeway. It gets about 17 mpg empty and 12 to 13 1/2 mpg loaded. Some of my friends own Dodge diesel pickups, but no way would I trade with them.” “My worst buy is my 1995 Dodge Intrepid car. On the way home the air conditioner duct fell down on top of the brake pedal which could have caused a wreck. Every time I hit a bump the plastic dash pops up about 3 in., and plastic pins keep falling out of the windshield wiper cover. At 43,000 miles the engine is making a strange noise. Another problem is that the brake pedal sticks out too far. The car rides rough and is noisy on the highway. Also, it has hard seats. It drives, looks, and handles good. But I wouldn’t buy another one.”
Mike Nelson, Reed City, Mich.: Mike’s happy with his 1992 Ford F-350 4-WD diesel uuck, “I like the new look of the 1992 Ford trucks, They still use a straight axle in front instead of the independent front suspension that GM uses. The straight axle handles a load better. also like being able to sit up higher for better visibility. The seats make you sit with good posture without giving you a backache. Over all, Ford gives you more truck for your money.”
Ted H. Pyle, Miles City, Mont.: “My 1990 Ford F-350 4-WD crew cab pickup equipped with a 7.3-liter diesel engine is a best buy. It’s simply a pleasure to drive this vehicle. It’s a well made product. We're very proud of this pickup. We have driven Fords for the last 50 years and they just keep getting better.”
Ford F-250 Super Duty trucks
15 Best Buys4 Worst Buys“I’ve been impressed with the Kobalt tools I bought in 2015. Both my 80-volt electric chainsaw and leaf blower are awesome. They have plenty of power and long-lasting, quick-charge batteries. The chainsaw isn’t for firewood, but we built three barns (10,000 sq. ft.) with it. Where pole barn quality cuts are ok, it’s a game changer with no cords to contend with and no starting issues. The leaf blower is great for tractor radiators and general field cleaning for air filters, etc.
“I bought new Ford trucks in 2019 (F-250 Super Duty) and 2021 (F-150 4-WD). They’re great but driving them is like having a nagging mother-in-law on the dashboard: ‘I’ll cut the lights for you. Put your seatbelt on. You’re at a stop, I’ll cut the motor off for you. Here, I’ll defrost your mirrors even if it’s 50 F.’ I can’t put the darn key on my ring because the other keys press the alarm button so I’m constantly going back to get the key I need from the house. I can’t carry these new keys. Why can’t somebody just build a plain old truck?”
James likes his Milwaukee battery-powered tools, especially the new “fuel” tools. “They have a lot of power for such a small package and the warranty is 5 years on tools and 2 years on batteries. They once sent me a new tool because it would have cost too much to repair the old one. I had a battery go bad and they sent me a new one. Not many warranties are that good any more. We hardly use our corded or air tools any more. These are so convenient.
“I wouldn’t necessarily call it a worst buy but my Ford F-250 Super Duty with 6.7l diesel gets poor mileage - 15 mpg has been the best with about a 12 mpg average. On the plus side it will pull anything you hook up to it, and the ride is wonderful for a 3/4-ton pickup. I would rather ride in it than our car.”
“My 2017 Ford F-250 Super Duty 3/4-ton pickup has a lot of power and is fairly fuel efficient. The back-up camera on it is useful, and the step-in tailgate is handy.
“When we got our new Whirlpool refrigerator home we discovered the shelves aren’t adjustable and therefore milk bottles won’t fit on the top shelf. Also, the ice maker is very slow to recover.”
Robert bought a used 1999 Ford F-250 Super Duty 4-WD pickup equipped with a 7.3-liter turbocharged diesel engine. It had 225,000 miles on it.
“Normally I wouldn’t buy a pickup with that many miles, but this one seemed to be well maintained. It had primarily been used to haul a fifth wheel camper, so the miles had accumulated without a lot of abuse. The engine is quiet and only leaks a little. The pickup is built solid but had a totally rotted-out bed, which I replaced. Apparently the engine has a good reputation. We’ll see.”
“I suppose that in some situations this hitch system might save time and be convenient to use. However, by the time I get done setting it up, adjusting it, and screwing around trying to get it to work right, I might as well have hooked up the implement the normal way. Another problem was that my finish mower didn’t seem to float correctly. I finally gave the hitch to someone else.”
“It’s a handy truck for doing small jobs,” says Dale about his 2010 GM Canyon 4-WD pickup. “This pickup is dependable even though I did have to replace the water pump, and it drives extremely well. It has about 125,000 miles on it and seems to be holding up well considering how much I use it.”
On the negative side, he lists his 2010 Ford F-250 Super Duty 4-WD pickup equipped with a 6.4-liter diesel engine. “Its fuel economy is terrible, especially when pulling trailers. So far this year it’s getting only 9.2 miles per gallon.
“I’ve had endless problems with sensors, the 4-WD system, a leaky radiator, broken intake manifold bolts, torn seats, broken brake calipers, and a hole burned through the exhaust manifold. I have to admit this pickup does pull well when it’s not in the shop. But I can barely afford to operate it.”
“I’m impressed with my Woods 990 7 1/2-ft. finishing mower and Woods 7-ft. box blade. The finishing mower has a heavy duty frame and wheels. It’s a wonderful mower. The box blade is also built heavy and has held up great. I’ve always been sold on Woods products.
“I bought a used 2001 Ford F-250 Super Duty pickup with about 46,000 miles and sold it at about 49,000 miles. The 5.4-liter engine had no power at all.”
“My 2003 Ford F-250 Super Duty pickup equipped with a 6.0-liter Power Stroke engine was the biggest piece of junk I ever owned. It started having problems at about 8,000 miles and was at the dealer a lot. After about 36,000 miles the warranty expired and I had to pay for all repairs from then on. So far, I’ve spent about $15,000. I still have this pickup today and am still paying repair bills. It has about 109,000 miles on it and has never been abused.
“I called the company’s warranty service people but they just said ‘sorry’. I was offered $7,000 for this pickup 2 years ago on a trade. I guess I should have taken them up on it.”
“I like my 1999 Ford F-250 Super Duty pickup equipped with a 7.3-liter Power Stroke diesel engine. I also like my 2006 Scion XA hatchback car. Both vehicles have at least 200,000 miles on them but are still going strong. The pickup can do about anything and is strong enough to pull Texas across the country. The Scion XA gets 30 mpg and still rides as good as new.”
Howard’s satisfied with his Homelite 42cc, 14-in. chainsaw. “It’s light and handy, once I take off the safety tip that restricts the cut to about 12 in. Best of all it starts with a couple of pulls, unlike my Poulan and Stihl models.”
On the negative side, he lists his 1999 Ford F-250 Superduty pickup equipped with a Triton 5.4-liter engine. “An oil leak developed between the head and block and cost $1,900 to repair. Also, the heads only have 4 threads in the spark plug ports with aluminum inserts rather than steel inserts, like on a real engine. Ford should have stuck with what they were good at – cast iron and push rods, not aluminum and overhead cams.”
“It’s the best pickup I’ve ever owned,” says Cleveland about his 2009 Ford F-250 Super Duty model equipped with a 5.4-liter engine.
“My 1957 Ford 660 tractor still starts faithfully. I use it to rake hay with a Ford 3-pt. mounted rake.”
Terry’s the satisfied owner of 1993 and 1997 Ford F-250 Super Duty pickups, both equipped with 460 cu. in. engines. “Both pickups pull really well. The 1993 model has about 149,000 miles on it but has required only normal maintenance. I use them to pull trailers and to push snow.
“My Husqvarna 455 Ranger chainsaw equipped with an 18-in. bar is my worst buy. The oiler didn’t do a good job of lubricating the bar, and the chain often came off. I took the saw back to the dealer twice and complained but got nowhere. Later on I learned the drive gear on this saw’s oiler is made of plastic and tends to break or slip. I got rid of the saw and bought a Stihl 30 model, which works twice as good.”
“In 2003 I bought a 1999 Ford F-250 Super Duty FX4 pickup equipped with a 7.3-liter Powerstroke diesel engine. It had about 97,000 miles when I bought it and recently turned 250,000 miles. The engine works great. I brew my own biodiesel and run this pickup on 100 percent biodiesel during the 8-month warm season in Iowa. The only problem is with the bearings in the pickup’s front wheel hubs. I’ve had to replace the bearings four different times, and it costs about $1,000 for both hubs. What’s more, I rarely use 4-WD any more.
“I like the pickup’s 7.3-liter Powerstroke diesel engine. And I love using biodiesel, especially when it costs only about $1 per gallon to make. All in all, except for the wheel hub problem this is a great pickup.
“I love the 1986 Mercedes Benz 300 SDL car I bought used equipped with a diesel engine. It has about 90,000 miles on it. I bought this car because we were spending more than $400 per month on gas to commute in my wife’s 2011 Kia Sorento. I run it on 100 percent homebrewed biodiesel during the warm months. Commuting in the Benz instead of the Kia is saving us $300 per month in fuel costs.”
Randy nominates his 2002 Ford F-250 Super Duty 4-WD extended cab pickup equipped with a 7.3-liter Power Stroke diesel engine as his “best buy.” “I’ve used it a lot to pull a 36-ft. tandem axle, 20,000-lb. rated gooseneck trailer on which I haul a Ford 555 backhoe.
Robert’s pleased with his 2000 Ford F-250 Super Duty pickup equipped with a 5.4-liter, V-8 gas engine and 5-speed transmission. “I haven’t had any problems at all with it. It has more than 70,000 miles on it and has required only regular oil changes and tire rotations. I installed a fifth wheel hitch in the bed.”
Wendell’s pleased with his 2001 Ford F-250 Super Duty extended cab pickup. “I like the ride and also the V-10 engine, which has a lot of get-up-and-go. I’ve put more than 5,000 miles on this pickup, and about 4,000 of those miles have been spent pulling a 16-ft. trailer loaded with a tractor and Bush Hog mower. It’s a good pickup.”
Larry’s impressed with his 1999 Ford F-250 Super Duty extended cab, shortbed pickup equipped with a diesel engine and 6-speed manual transmission. “I like the way it handles. The diesel engine has a lot of power and is economical to operate. The cab offers a good view and the four doors are handy for passengers. However, I’m disappointed with all the wind noise in the cab. My 1992 Ford pickup is much quieter.
“My worst buy is my 2000 Millermatic 250X wire welder equipped with gauges. I’m very disappointed with it. We have an old Millermatic 200 that has been trouble-free. The spool of wire on the 250 won’t turn freely. The problem is that it catches on a bolt head that should have been countersunk. The factory sent me a kit to correct the problem. The voltage varies whenever I try to weld. It’s either hot or cold and won’t hold an arc. The voltage and wire feed charts are located on the inside of the door so every time you want to check the settings you have to open the door. The charts should be on the outside of the door. Also, the 200 model does a much smoother job of welding than this one.”
“It tows six 1,800 to 2,000-lb. round bales with ease,” says Donald, pleased owner of a 1999 Ford F-250 Super Duty 4-WD pickup equipped with 5.4-liter engine, automatic transmission, and 4:10 axles. “The truck handles extremely well and has ample power. We like the style of the new Louisville Line. We also like the straight axle and lock in and out manual front hubs.”
He also likes his 1996 Vermeer Super K baler. “We’ve made over 3,000 bales with it, no problems.”
Philip’s most recent best buy is his 1999 Ford F-250 Superduty diesel pickup equipped with extended cab and full box. “Handling is excellent and it rides better than a mini van we own,” he says. “It has awesome power and the Allison automatic transmission shifts exceptionally smoothly. It’s pretty fuel efficient, too, getting 14 to 18 mpg.”
Ford 4000 loader tractor
16 Best Buys0 Worst Buys“My best buy is my Ford 4000 loader tractor with a 3-cyl. gas engine. It’s as dependable in 2026 as it was when I bought it in 1967. After 59 years of heavy loader work, it’s still going strong.
“My Echo chainsaw and gas trimmer are great farm tools.”
“It does a great job and leaves a fine seedbed,” says Herman about his 2014 Great Plains Turbomax 15-ft. vertical tillage tool.
“My 2016 Echo chainsaw equipped with a 20-in. bar is a great saw. It always starts right up.”
He likes his 1967 Ford 4000 loader tractor equipped with a 3-cyl. gas engine, and says his 1941 Massey Harris 101 Jr. tractor equipped with a 4-cyl. Continental engine “runs like a top.”
“My 1964 Ford 4000 tractor has a lot of power for its size and a 5-speed transmission with just the right speed in every gear.”
“My 1970 Ford 4000 tractor always starts right up and is easy to drive. It turns short which makes it easy to get around trees when bush hogging in the woods.”
“I bought a used 1964 Ford 4000 and it’s a nice operating tractor. It’s equipped with a Select-O-Speed transmission that has a total of 10 forward and reverse gears. Unfortunately, only three forward gears and one reverse gear worked when I bought it. I solved the problem by freeing up an interlock valve between the direct drive clutch and the forward band, so now all the gears work.”
“My 1970 Ford 4000 gas tractor always starts, even on the coldest days. I use it for everything from skidding logs to plowing our garden plot.”
“My Ford 4000 tractor is easy to climb onto and easy to handle. I use it mainly for garden work and for cutting grass.
“My Baker Co. sawmill makes it easy to turn logs into lumber for my building needs (ph 800 548-6914; www.baker-online.com).
“My Jacobs wind turbine has broken down more often than it has produced power, and the company service is poor. The idea behind this wind turbine was good, but the execution stinks.”
“My 1998 and 2004 Dodge 3500 pickups are both equipped with Cummins engines and work great for all our towing jobs.
“My 1966 Ford 4000 is a handy tractor. I use it to bale and cut hay, to grind feed, and to plant crops. Very few problems.”
“My 1972 Ford 4000 low profile SU tractor has almost 8,000 hours on it but still has the original brakes and clutch. I bought it used when it was one year old, equipped with an industrial loader. It has its own hydraulic pump on front that’s belt-driven off the engine driveshaft, with the hydraulic reservoir built into the loader frame. It’s a lot stronger and quicker than loaders that run off tractor hydraulics. This tractor doesn’t use any oil between changes.
“My four Stihl chain saws are all best buys. They include a model 011, two 034’s, and model 036.
“My 1979 Ford F-250 3/4-ton pickup has about 150,000 miles on it and still runs great. It’s equipped with a 400 cu. in. engine and a 4-speed transmission. About 15 years ago I mounted dual wheels and a flatbed on it so I can use it like a 1-ton pickup. I use a 12,000-lb. Warn electric winch with this pickup, which is also a best buy.”
Glen says he’s “generally satisfied” with his 1968 Ford 4000 flat deck row crop tractor. “It has power steering and a smooth shifting 4-speed standard transmission with high and low ranges.“
John and Peggy Milliman, I can also buzz around the neighborhood to check on things and stop to chat with many folks. It’s like riding around on your porch -people always stop us to talk.”
“My best buy is a 1972 Ford 4000 tractor equipped with a 3-cyl. diesel engine and front-end loader. I bought it used three years ago. It now has more than 2,400 hours on it. No problems at all.
“My 1965 Massey Ferguson 65 tractor equipped with a 4-cyl. gas engine is a best buy. I got it from my dad who bought it new and then retired. It now has more than 1,700 hours on it.”
“It has plenty of power for its size and the Select-O-Matic transmission is ideal for loader and tillage work,” says John, pleased with his 1971 Ford 4000. “My tractor is the gas-powered model, so fuel economy could be better, especially when I’m working it hard pulling a 60-in. tiller in clay soil. Also, the Select-O-Matic transmission is hard to work on and expensive to repair.”
“My ‘best buy’ is a 1966 52 hp Ford 4000 tractor I bought used,” says John. “It’s always been dependable and rugged. It starts every time. I use it for mowing, digging post holes, and plowing and I’ve never done a thing to it except change the oil.”
John’s also pleased with his DeWalt 14-in. chop saw, which has given no problems whatsoever in the three years he’s owned it. “Cuts straight every time,” he says.
“Our best buy is our 1971 Ford 4000 tractor equipped with a 3-cyl. diesel engine. We used it hard for 20 years and then retired, but we still use it to mow land that isn’t in row crops. It has more than 12,000 hours
“We bought our 1972 Ford 4000 tractor used and it now has over 5,000 hours on it. It’s still a solid tractor with very few problems. We converted both our 4000 and 7600 Ford tractors to hydrostatic power steering which we find a lot more satisfying than the original power steering system. “Our New Holland 680 manure spreader works great.”
“My 1973 Ford 4000 tractor was in good shape except for the gas engine, which was worn out. I replaced it with a new 3-cyl. 52 hp engine from Ford. I had to make a new fuel line and a new air intake tube for the air cleaner, but other than that it just bolted in and I was ready to go. It’s a very fuel efficient tractor and one of my all-time best buys.”
Ford tractor
14 Best Buys2 Worst BuysBradley nominates his 2009 Massey Ferguson 2615L tractor equipped with a Wallenstein FX90 winch as his “best buy”. “This tractor is built strong and reliable. Most of the plastic had to be replaced, as well as the instrument panel, before it had 100 hrs. but we’ve had no problems since.
“I’m happy with the 2000 Ford 1920 tractor that I inherited.”
He’s disappointed with his 2004 Chevy Silverado extended cab pickup. “This pickup has only about 76,000 miles but I’m spending about $2,000 per year on maintenance. It needs new brakes every 12,000 to 15,000 miles. The front bearings went out before it had 40,000 miles on it, and the extended cab doors operate hard even with a lot of grease. All the lines leading to the transmission and brakes have been replaced as well as the water pump. The instrument panel went out and had to be replaced, as well as the tailgate hinges and rocker panels.”
“I like my two Ford tractors -a 1947 2N and a 1951 8N. I bought both used; the 2N in 1964 and the 8N in 1968. Both have been dependable and required only routine maintenance over all our years of use.
“My 2004 Cub Cadet 1022 garden tractor has caused more trouble in 8 years than the Deere 112L garden tractor I bought new in 1985 and retired in 2003.”
“The Ford 2000 tractor my grandpa bought new in 1973 still has the original engine, starter and Firestone tires. It has about 3,300 trouble-free hours and we use it almost every day.
“We attend 5 different farmer’s markets from May through October so we bought a couple of canopies from TSC on sale for $50 apiece. I figured we would get at least one year’s use out of them, but they lasted only a month. The frames bent and broke and the canopies weren’t waterproof.”
“My 2007 Atchison 12-bale hay trailer is well built. It rides on tandem dual wheels and can handle twelve 1,400-lb. round bales with ease. I use a 3/4-ton pickup to pull it across all types of terrain with ease. It self-dumps the bales and is simple to operate.
“My 821 Ford diesel tractor is a real stud when working in hay fields. I use it with a 42-ft. Rowse dump rake. No problems. It’s also fuel-efficient.
“I’ve had problems with my 1993 Ford F-250 4-WD pickup. I have to replace the slave cylinder on the hydraulic clutch almost every fall when the first cold weather arrives. I quit counting after I replaced 13 cylinders. Also, the body material on it is inferior. The pickup has less than 70,000 miles on it.”
A 1987 Ford loader tractor purchased used and equipped with a 3-cyl. diesel engine rates as Douglas’s “best buy”. “This tractor runs great and steers easy even though it doesn’t have power steering. It has plenty of power to operate my Ford brush mower on hilly ground. It also has great brakes and a roomy, comfortable cab. I love this tractor.
“My 2009 Frigidaire upright freezer was so loud you could hear it from one floor above. It turned out the noise was caused by an internal plastic cover sheet/panel that was vibrating. The Frigidaire factory provides a repair kit.”
“Over the years I’ve owned 3 Ford tractors that were best buys, all equipped with 4-cyl. diesel engines. They included a 1959 model 601, a 1962 model 801, and a 1986 model 5900.
“My worst buy ever was a 1990 Massey Ferguson 231 tractor. It had electrical problems. Also, the valve stems on the tires rotted off after 2 years, and the 3-pt. hydraulics were slow and jerky. After 200 hrs. of misery I finally sold it.”
“My all-time best buy was a 1956 Ford tractor. I traded it to a neighbor 40 years ago and then bought it back again in 1968 for $350. It was beat up and covered mostly with manure. I had the tractor restored at a cost of $3,500, and since then I’ve entered it in every parade that I can, winning first place every time. It’s the best investment I’ve ever made in my 90 years.”
“I use my 1980 Ford 1900 tractor to do everything from mowing brush to disking. It has required no major repairs. It’s my best buy.”
“My best buys are two Ford tractors - a 5610 that I bought used, and a 1520 which I bought new equipped with a belly-mounted mower. It has a 3-cyl. diesel engine. Both tractors are easy to maintain.”
“My best buys are two Ford tractors - a 5610 that I bought used, and a 1520 with a 3-cyl. diesel engine that I bought new with a belly-mounted mower. Both tractors are easy to maintain.”
“We’re pleased with our two 1998 Ford tractors - a 4630 turbocharged model and a 3930. The 4630 runs quieter and has a bit more power. We use these tractors mainly to handle 1,100-lb. round bales and for mowing. They both run nice and handle well.”
Among George’s “best buys” are three Ford tractors - a 1954 NAA, a 1960 881 and a 1966 4000.
“I’ve had very good luck with all these machines,” says George. “The NAA has a Sherman transmission giving it 12 forward, three reverse and three pto speeds. Both the 881 and 4000 have Select-O-Speed transmissions, 2-spd. pto and ground drive.”
Jeff’s the owner of a “best buy” Case-IH 7230 front wheel assist tractor. “The best thing about it is the dependability. We’ve used it for two years with no problems. It has about the same horsepower as the Ford tractor that it replaced but pulls everything easier and smoother. Its better balanced, too, and compacts the soil less than the Ford - we can see the difference. The salesman told us we could do the same job by buying the company’s next smaller model, the 7220. We didn’t follow his advice, but I think he was right. “Our worst buys are Ford tractors - we’ve had two that were nightmares. The big one, a TW-30 model, required regular 4,000-hour engine replacements. It was poorly built in terms of maintenance and repairs and always seemed to be breaking down. The smaller model, a 5610 that we bought new, had problems from day one. One cylinder wall on the engine turned to Swiss cheese at 900 hours. The rear end made a noise which turned out to be caused by a missing part that was left out during manufacture. A fuel problem was worked on by two different dealers without success until after the tractor’s warranty had expired. At that point the company rep refused to pay for it even though the problem started long before the warranty expired. I had to sue the company in order to get compensation. When the company lawyers heard the story they ordered the rep to pay up. “We also have a 1958 Ford 950 tractor. I can vaguely remember my dad taking delivery of it when I was a small child. It’s still going strong today. The only real repair ever done to it was a new paint job.”
“Our 1989 Ford 1910 tractor is the best tractor we’ve ever owned. Our only expense has been to repair a hydraulic line.”
Jim’s “worst buy” is a 1990 7710 Ford tractor that he bought in 1991. “It was a leased tractor that I bought with only 327 hours and with the remainder of the warranty intact. The tractor’s been a problem from day one. Almost as soon as it was delivered, I discovered the hydraulic remotes didn’t work. So much for fall plowing. Next, the rear main seal went out of the engine. Those two problems were fixed promptly by the dealer, Converse Equipment at Whitewater, under warranty. Soon after that, however, the engine developed a vibration that shook a plug out of the intake manifold. That, in turn, caused the intake to suck in dirt which, in turn, caused the engine to use a lot of oil. The dealer brought me a new plug right away but that didn’t stop the vibration problem. I’ve been round and round with the dealer for almost three years on this problem and it remains unresolved. Now the warranty has expired.”
Roger Hoff, Applegate, Mich.: “My 1980 Ford 1900 tractor is a best buy. It starts good in cold or hot weather. The front wheel assist has great traction, but itdoesn’t have power steering nor is there a kit available to install it.”
Ford Explorer equipped
6 Best Buys8 Worst Buys“Aluminum round bale feeders from Five Star Manufacturing in Crane, Mo., are a best buy (www.fivestarmfg.com; ph 800-733-5720). They’re made from rectangular aluminum tubing laid flat and are extremely light, tough and durable. If the hay is decent, the cows will slide them around to clean up almost all of the waste.
“My worst buy is my 2023 Ford Explorer. The dealer had to replace the struts at about 200 miles, when it was new. It now has about 30,000 miles and is on its third set of struts. Last time, they replaced only one side, so I guess it’s getting better. Counting the originals, that’s 4 1/2 sets.”
“The 2003 Ford Explorer I bought used with about 65,000 miles is my worst buy. It now has about 121,000 miles on it. The ABS brakes quit working, both rear springs broke, the wiring for the electric-operated windows deteriorated and had to be repaired, and the heater controls quit working and were repaired, but then failed again just 30 days later.”
A 1998 4-WD Ford Explorer rates as Gordon’s “best buy”. “I’ve put more than 190,000 miles on it with no major problems. Many of the miles were in 4-WD and off-road. When driving on the highway in 2-WD it averaged 22 to 24 mpg. I traded up for a 2004 Ford Explorer and am well-pleased with it, too.”
He owns a 2004 Ford Explorer. “At 30,000 miles the company sent me a form offering to extend the factory warranty, so I bought a 75,000-mile or 5-year extended warranty. Last year the vehicle had 101,700 miles on it when the engine locked up so tight a mechanic couldn’t even pry the engine loose. I notified the company, but they said the extended warranty I bought started when the car was manufactured, not at the date or mileage when I bought the warranty. So make sure you read those warranties carefully.”
A 1997 4-WD, 4-door Ford Explorer equipped with a 6-cyl. engine rates as Gerrit’s “best buy”. “I’m a die-hard Ford man and have never owned a bad one. This Explorer is no exception. It’s fuel efficient and doesn’t use any oil. The body is in great shape, it has a comfortable ride, and it’ll tow a big trailer with no problems. It has more than 136,000 miles on it but still runs great.”
“Our 1991 Dodge pickup equipped with a Cummins diesel engine is my best buy. It has required only minor repairs and upkeep in more than 300,000 miles.
“My 1991 Ford Explorer is my worst buy. We’ve replaced the motor, transmission, air conditioner, and a lot of other minor parts. In just 120,000 miles, we’ve spent 1 1/2 times as much money to keep it running as we did to buy it.”
“Thirty years ago I bought a used Farmall 560 diesel tractor. I rebuilt the engine 20 years ago and have used it ever since as my baling tractor. I haven’t had any major problems with it.
“My 1992 Ford Explorer is my worst buy. Before it had 100,000 miles on it I had to replace the rear pinion bearing, transmission, engine, and air conditioning condenser.”
Dan’s impressed with his 1998 Ford Explorer and also his 1999 Ford F-250 diesel pickup. “We purchased both vehicles new and have had great luck with both of them. Neither has been back to the dealer except for a Firestone tire recall on the Explorer.”
“Our 2000 Ford Explorer equipped with a 4.0-liter engine is our worst buy. After the initial break-in period, we started using Amsoil synthetic oil in the engine. The engine failed at 35,525 miles, and an oil analysis revealed the presence of antifreeze in the oil. However, Ford wasn’t interested in the cause of the engine failure because we told them we went beyond the normal oil change interval recommended by Ford. They refused to honor the warranty. The Amsoil dealer said their oil wouldn’t have worn out unless an outside problem, such as the antifreeze, made it fail. Amsoil wouldn’t warranty because a factory defect caused the engine to fail.
“At our expense, we replaced the engine with a used one with 1,000 miles on it. I took oil analysis samples from the newer engine and again, they showed antifreeze present in the oil. The 1991 Ford Explorer that we had traded in required adding coolant periodically. So we’ve had three Explorer engines that all possibly leaked antifreeze. We like the Explorer otherwise but will never buy another one. I suggest that anyone who owns an Explorer do an oil analysis before the warranty expires. I also suggest they be cautious about using any product that extends the time between oil changes, because Ford doesn’t recognize anything other than their own maintenance schedule.”
“My 1999 Ford Explorer is my worst buy. I bought it new, but it had three company recalls before it was even delivered to me and has had a lot of problems since then. The front brake slide pin froze, the rear oil seals had to be replaced, the electrical system has problems all the time, the front brakes squeal and can be heard a quarter mile away, a pin holding the hood padding poked a hole in the paint in the hood, and the rear wiper arm breaks easily. The rear axle has a 3.71 ratio which wastes a lot of fuel, and I can’t get anything but local AM stations on the radio. Most of the time I just hear static engine noise on the speakers. Last but not least, this vehicle is equipped with those infamous Firestone tires.”
“My best buy of all time is my 1993 Woodmizer sawmill. It does everything the company says it will do. I bought it to cut about 150,000 board feet of mixed hardwoods that had been downed by a tornado. I’ve also used it to saw lumber that was used to build several barns and two houses. It’s simple to operate.
“My 1995 4-WD Ford Explorer is my worst buy. It must have been made late on a Friday or early on a Monday. I spent almost as much time getting it repaired as driving it. The fuel metering system is still a problem even though the computer card has been replaced twice. The clutch and brakes have required extensive work as have the electric windows, and the windshield was made faulty and cracked. On the other hand I like myFord F-250 4-WD pickup as much as any vehicle I’ve ever had.”
Allan’s the owner of a “best buy” 1988 Steiner S-20 4-WD tractor equipped with a 20 hp engine and 4-ft. front-mount mower. “It has a lot of power and traction and can handle even the toughest mowing conditions. It has center steering which makes it very maneuverable for mowing around bushes and trees. I use a hydraulic-operated angle blade on it for snow removal or light grading jobs. A variety of other attachments are available which makes it a versatile machine.
“My Hesston 4570 in-line square baler makes firm, square bales that are easy to load on my stack wagon.”
On the negative side, he lists his 1992 Ford Explorer. “The engine valve cover gaskets leaked, and to replace them the fuel injection system had to be removed. The job costs $300 or more.”
Hollis Schauer, Eau Claire, Wis.: “My 1992 Ford Explorer has been trouble-free. I like the high seats and leg room. The 6-cyl. engine has plenty of power and gets 22 to 24 mpg. “My worst buy is my Agri Technologies M-100 applicator that applies hay preservatives on my baler. The unit was not well designed. The pump failed after 100 gal. of use. The brass parts should be stainless steel. It’s also overpriced. On the positive side, the flow meter makes it easy to calibrate application rates, and the preservative really works. New models have been improved.”
William A. Mielke, Marriottsville, Md.: A 1991 2-door Ford Explorer is William’s “best buy”. “I’m very satisfied with it. It has good power, rides comfortably, is quiet, has good styling, and is fuel efficient. No problems. It’s well designed and built.”
Ford pickups
12 Best Buys2 Worst Buys“I’ve had many Ford pickups over 60 years. I drove a 2002 F-250 SuperCab with a 5.4 engine and an automatic transmission. In 175,000 miles, I never touched the engine or transmission. Both were dry with no leaks. I sold it in 2024. It now has over 300,000 miles and is still going. People tell me this is unreal. I still drive Fords. Treat them like a good woman, and they’ll stay by your side.
“FARM SHOW’s ‘Best, Worst Buys’ section is a best buy. I’ve avoided some bad buys and found some good ones by reading it.
“Mahindra tractors have been good buys. I bought my first in 2002 and now own two. With regular service, they keep going.
“I’ve been using Miller portable welders for 50 years. I went to them because Lincoln didn’t have AC for hand tools.
“On the negative side, anything I’ve ordered off Facebook has been junk, or I never received it, even though my credit card was charged. There’s no way to contact them.
“I bought a hydraulic and cable lift for a pickup or trailer bed from Northern Tool. I didn’t open the box for a year. When I went to assemble it, the packaging didn’t include a base section. I went back to Northern Tool, and the manager told me they had stopped carrying those. They wouldn’t give me my money back even though I had my receipt. I tell everybody to beware of Northern Tool.”
“One of my best buys was a new Deere 8440 tractor. We used it for 30 years before trading for another best buy, a Deere 8320.
“Ford pickups have also been best buys. We have a 1999 7.3 with 320,000 miles that’s still going strong. We also have a 2012 with a 6.7 that’s been a great pickup.”
“If you haven’t tried a Ford pickup with an Eco-Boost engine, you will be surprised,” says Norm about his 2011 Ford F-150. “It pulls a trailer better than any 8-cyl. pickup I’ve ever owned and I’ve had all makes. On secondary roads, if I’m really trying for good mileage, I get more than 21 mpg. However, the average is more like 15. No mechanical problems with it in 2 1/2 years.”
“I recently purchased a 2004 Ford pickup with a V-10 gas engine and so far so good. My best friend bought a V-10 years ago and he has said numerous times it’s a better puller for his 32-ft. gooseneck flatbed than his other 2 Dodge diesel pickups. I’ve been pulling a trailer with my V-10 and couldn’t be happier with the power – and that it gets 10 mpg. This is not my coffee shop pickup. I have another pickup for that. But when I need power, the Jolly Green Giant comes out of the machine shed. My wife calls my two pickups the Beauty and the Beast.
“In my opinion, if you only pull trailers occasionally, a diesel is not needed. Diesel replacement parts are often much more expensive. For example, on my old Ford 7.3 diesel I had a dealer replace a fuel filter and it cost $160. On my gas V-10, I replaced it myself and it cost $8. My grandpa always said, ‘It’s not about how much money you make, but how much money you can save.’”
Doug’s had problems with Ford pickups, including a 2000 Ford F-150 2-WD Supercab, a 2003 Ford F-150 Supercrew, and a 2006 Ford F-150 Supercrew. “The Supercab model came with a 4.6-liter engine which had good acceleration but lousy top end.
“The 2003 and 2006 models both had the 5.4-liter Tritan engine, which was very poor for both power and fuel efficiency. At about 45,000 miles the 2003 model started making all kinds of strange noises so I traded it for the 2006 model, but I didn’t like it any better. Neither the dealer nor the company would do anything to keep me happy.
“We traded the 2006 model for a 2007 Dodge 1500 Mega Cab 4-WD model equipped with a 5.7-liter Hemi engine. It’s my best buy. This pickup gets up to 22 mpg and has plenty of power for pulling heavy loads. It also has a lot of storage space and is a well designed pickup, both inside and out. I’ve found Dodge dealers are great to work with. When my 17-year-old son was ready for his first vehicle we went straight to Dodge and got a good deal on a 2004 quad cab 1500 4-WD model. The Dodge 1500 is a great pickup. It doesn’t surprise me that Ford is in a distant third place behind Dodge, as Dodge continues to gain on GM and may soon become number one in pickups.”
“My 1993 Ford pickup has more than 253,000 miles on it, yet everything on it is original including the starter, alternator, and water pump. It still uses less than one quart of oil between changes.”
“Our 1998 Dodge 4-door ‘K’ car, which we bought used, is a best buy.
“Our 1991 Pontiac Sunbird 2-door car runs good and is also a best buy. We bought it used with about 140,000 miles on it. It has a 4-cyl. gas engine that’s easy on fuel.
“The 1985 Ford pickup that we bought used is our worst buy. It’s equipped with a 302 cubic inch, fuel-injected engine. We’ve had a lot of electrical and fuel problems with this truck.”
A 1991 Dodge D250 pickup equipped with a Cummins 5.9-liter engine rates as Robert’s “best buy”. “I’ve had very few problems with the engine.
On the “worst buy” side, he lists his 1990 Ford pickup. “The problems it had were too numerous to mention. I had always been a Ford person, but this pickup converted me into a Dodge person.”
“Since 1985 I’ve owned three Ford pickups and they’re all best buys. The most recent is a 1996 F-350 equipped with a Power Stroke diesel engine. It has almost unbelievable power. I use it to haul shelled corn on a dump trailer and normally have a gross weight of 32,000 to 40,000 lbs. It has required only routine maintenance. I also had a 1985 model with a 6.9-liter engine. I installed a Banks turbocharger on it at 80,000 miles. I also had a 1992 model with a 7.3-liter engine.”
Larry’s pleased with his Ford pickups. “I had two 1977 F-150 models. One went 267,000 miles and only had the bands tightened once in the automatic transmission. The other one went 192,000 miles with no problems. I had a 1986 model with 99,000 miles on it when I traded it for my current 1994 Ford F-250 XLT extended cab 4-WD pickup. It’s equipped with a 460 cu. in. V-8 engine, 4:10 rear end, and 4-speed automatic transmission. It’s by far the best pulling, riding, and driving Ford pickup I’ve ever owned. It gets 14.8 mpg on the highway and 10.6 mpg pulling a 35-ft. camper followed by a 20-ft. boat. It handles a 24-ft. livestock trailer with ease. I can’t say enough good things about it. No problems after 35,000 miles.”
Richard likes his Ford pickups. “Several years ago I had three Fords with a combined total of more than 400,000 miles. Today I also have three Fords - a 1980 F-150 with 125,000 miles, a 1992 Escort with 110,000 miles, and a 1993 Explorer with 93,000 miles. The combined total for them is more than 325,000 miles, and none of their engines have been worked on. The F-150’s head gasket, water pump, and exhaust gasket had to be replaced. I drove it outstate several times last year. My son Kevin has two used Fords - an Escort and a Ranger - with a combined total of more than 200,000 miles. We’re shopping for a new car this year and will look only at Fords. Why change a good thing?”
E. V. Armknecht, Auburn, Neb.: “We have two large picnics in town each year. When my wife and I went out to the farm to get another picnic table with our proud new 1992 full-sized Chevrolet pickup, we discovered to our surprise that the table was too big for the bed. We lost pride in the new Chevrolet when our son had to haul the table with his new Ford pickup which has a box that’s 5 in. wider. We were ashamed to have to use a Ford to haul our tables back and forth. I can see why Ford outsells Chevrolet in pickups.”
Howard Schmidt, Marine City, Mich.: A 1985 Ford F- 150 pickup ratesas Howard's so hard that it took both my legs to push it. It locked into third gear and I had to take the shift lever off to unlock it. wound up putting an automatic transmission in it and now it works fine.” Howard says his 1988 Poulan 2300chain saw equipped with a 16-in. bar is a “best “It goes anywhere and makes an excellent loader tractor. Even my wife likes a.” buy”. “Starts easy in hot or cold weather, saws fast, and is very easy to handle.”
Michael T. Mayer, Manhattan, Kan.: “I'll never recommend a Ford pickup to anyone [ like,” says Michael, disgruntled owner of a 1989 F-150 XLT Lariat 4-WD equipped with a 5.0-liter V-8 engine and 5-speed manual overdrive transmission, “The pickup wasn't aligned right from day one. The engine didn't use any oil in the first 1,000 miles, but now it uses one quart every 800 miles and is getting worse. At 1,500 miles a bearing went out on the transfer case. Now ithas 5,700 miles and things aren't improying. It's supposed to get 17 mpg but it gets only 13 mpg at best. I bought the pickup out of town and made the mistake of asking the local dealer to repair it. He had it for three days, leaving me to find my own transportation, and did poor service work. He said that according to Ford regulations, the oil usage was within tolerance levels, In fact, Ford says it’s tolerable for an engine to use one quart of oil every 600 miles, I put 114,000 miles on my 1982 Chevrolet diesel pickup and never used one quart of oil in 3,000 miles. The dealer says he'll look at it again when it has 7,500 miles. If Ford had a ‘satisfaction guaranteed or yourmoncy back’ offer, I'd jump at it in a heartbeat.”
Ford 5000 loader tractor equipped
11 Best Buys1 Worst Buy“When I got home from the Army in 1966, I bought a Ford 5000 loader tractor equipped with a diesel engine. This tractor still runs like new, and 3 of the tires on it are original. The Freeman loader has been a great help for many jobs.”
“I bought my Ford 5000 tractor used 35 years ago, and the hour meter on it broke 25 years ago at 6,700 hours. It’s the best tractor we’ve ever owned. We use it to operate our round baler and to do lots of other dirty jobs, with no problems at all. I’d buy a new one just like it if I could.”
“My 1973 Ford 5000 tractor has been used, misused, and abused but, like the old Timex watches, it just keeps on ticking. I’ve spent very little money on it. I wish I could buy a new tractor exactly like this one.
“My 2002 Chevrolet Silverado 3/4-ton pickup equipped with a 6-liter, V-8 engine is my worst buy. It has no pulling power, gets stuck easy, and wanders all over the road.”
“We bought a used 1967 Ford 5000 tractor equipped with a gas engine with 500 hours on it. We’ve used it a lot but haven’t had to touch the engine yet. The seat is more comfortable than the ones on my 1970 Ford 5600 or my Ford 7700. It also shifts gears easier than those tractors. I wish the factory would build a duplicate model.”
On the minus side, he lists his Belarus 65 hp tractor. “Oil seems to leak constantly from one place or another. The head gasket leaks in several places. We used a small ratchet wrench to remove the bolts and when they were put back in they must not have been torqued down correctly. Now other bolts are coming loose in different places. The hydraulic pump case had a hairline crack at the corner bolt hole, and unfortunately the problem wasn’t found until the warranty had already expired.”
Bruce is impressed with his 2000 Subaru Legacy GT 4-WD station wagon. “Last January we had a lot of ice and snow with icy roads, but this car handled so well on them that we hardly even noticed that they were slippery. The ABS brake system is a big help in being able to stop securely. It’s a fun car to drive and I like the styling.
“My worst buys are Harbor Freight Tools. I bought an item that I was dissatisfied with and called the company’s toll-free phone number, then was told to call a different customer service number. I tried to call that number seven different times but always got a busy signal. I sent three faxes to voice my complaint but got no response. I’ll never do business with this company again.”
Richard G. McDanolds, North
“My 1973 Ford 5000 tractor has more than 25,000 hours on it but the engine has never been overhauled.
“My 1964 Patz gutter cleaner still has its original motor and drive unit. I’ve replaced the chains and drive sprockets twice. I still use this old reliable manure cleaner every day.
“My 1968 Homelite C72 chainsaw has gone through four bars and more than 25 chains and sprockets but is still going strong. It’s been very dependable and is a best buy.”
“All I’ve put into it are new tires and fuel,” says Oliver about a 1968 Ford 5000 utility tractor he bought used. “It’s my only tractor and it gets used hard every year for field work, haying and all my other chores. It’s easy on fuel and it always starts.”
On the negative side, he’s had bad luck with his 1997 McCulloch chainsaw. “The whole starting mechanism fell off after the first hour of use. After it was repaired, it never started right again without priming it. I gave it away for use as an exercise machine, because you could sure build up your arm muscles pulling on the rope trying to start it.”
Charlie likes his older model Deere 466 baler, which hasn’t given him any problems in two years of use, putting up 400 tons of hay per year. “It bales every bale perfectly and never misses tying one.”
He’s also pleased with two Ford 5000 diesel tractors he owns. “One’s got 3,000 hours on it, the other’s got 2,00 hours on it. They never give us a bit of trouble and are easy on fuel.”
On the negative side, he’s disappointed with his 1998 Deere Saber lawnmower equipped with an 18 hp engine. “It breaks every time I set foot on it. First, it was the steering bar. Then it was a bearing out of the mower deck. Next, a cut-out switch went out on the engine and it wouldn’t start. We finally took it back and traded it for a 1998 Craftsman with 21 hp engine which we haven’t had any trouble with so far.”
A 1969 Ford 5000 tractor heads Kenneth’s “best buy” list. “I bought it used with 4,000 hours on it. It now has over 8,000 hours and has never been in the shop. “My 1986 Ford 8700 tractor is also a best buy. I’ve put 2,000 hours on it with no problems. I had the fuel injector checked once. “My 1986 Honda Accord had 20,000 miles when I bought it and now has 95,000 miles. It’s had only regular maintenance.”
William G. White, Glanworth, Ontario: “We've got about 12,000 hrs, on our 1968 Ford 5000 tractor with no major repairs. All it’s needed are batteries and general tune-up. It'll do nearly 2 days planting on one 20-gal. tank of fucl.”
Ivan Runyan, Coin, Iowa: ‘‘My Ford 5000 all-purpose tractor is an asset to my farming operation. It has always started easily for a diesel and is economical on fuel. Has a comfortable seat, steers easily and is a pleasure to drive. Even though it has 6,900 hrs. on it, it's still going strong.” Ivan's also happy with his 1984 New Holland 451 mower with 9-ft. cutter bar, “This mower is easy to mount or take off the tractor. It performs well even in the thickest grass or hay. It’s quiet running and easy to keep in perfect running condition. Has given very little trouble and parts are usually available at our local dealer.”
Dave Pollard, Mantua, Ohio: ‘‘I’m not happy with my Dickey-John grain moisture tester. It’s been erratic and less reliable than my $85 Skuttle MT-2. Now, the display ‘window’ has completely blacked out. don’t feel I got over $200 worth of reliable use out of it,’ says Dave. “My 1967 Ford 5000 tractor is my all-time best buy. Even though it’s a gas model, it's very easy on fuel, and has been totally reliable. Until 1985 this has been my only tractor and I've never had any problems with it. It will start in any weather and has often been the only vehicle that would start at — 20°F, It's easy handling, nimble and has plenty of power."
Lawrence Dool, Thorsby, Alta.: “Everytime I used it, it cost me at least $400. Even when it did run right it never cut properly,” says Lawrence about his “worst buy” 1976 Deere 800 SP swather. He likes his Ford 5000 tractor, though, “It’s a 67-hp. tractor. I pull a 4-16 plow in hayland with no problems or slippage, even though the soil here is a very hard, clay-type soil. My uncle came with his Deere 3140 to show how good his tractor was but he barely made one round. He had the power, but he slipped all the way and the tractor began to heat up on him. This tractor has 5000 hrs. on it now and I've never had to spend a cent on it other than for routine maintenance.”
Ford F-100 pickup
12 Best Buys0 Worst Buys“Over the years our 1968 Ford F-100 pickup has worked hard with no breakdowns. In 1996 I passed it on to my oldest son, who used it for 15 more years before bringing it back home. It still has the original 360 cu. in. engine and now has about 350,000 miles on it.”
“The 1972 Ford F-100 pickup I bought used in 2000 is my best buy. Almost everything on it has been rebuilt or replaced, but it has never let me down or left me stranded. It’s a real workhorse. Parts for it cost about half as much as the ones for newer vehicles. Judging by the wear on this pickup I think it has about 400,000 miles on it. It still has the original paint.”
“It takes me back and forth to work in all kinds of weather,” says Richard, pleased with his 1980 Ford F-100 pickup with about 55,000 miles on it. “This pickup provides reliable transportation that shade-tree mechanics can appreciate, and parts for it are cheap. It has required only routine maintenance.”
“I like my 2007 Ford F-150 XLT pickup equipped with a 4.6-liter, V-8 engine. It has a lot of leg room, hauls like a truck, and drives like a big Cadillac. It gets at least 20 mpg. My wife drives a 2007 Mercury Grand Marquis but we always travel together in the F-150.
“My 1980 Ford F-100 pickup still runs great. I installed a Ford F-350 4-speed transmission in it.
“My worst buy is my Kubota MX5100 tractor equipped with a front-end loader. For the pto to turn at 540 rpm’s the engine has to turn at 2,700 rpm’s, which is way too fast. The drive train is noisy in all gears, as if they’re not meshing right. I brought the tractor back to the company but they said nothing is wrong. The tractor only has 11 hours on it.
“I own a Massey Ferguson 150, Ford 601, and two Farmall Cubs and haven’t had any problems with them.”
Mary nominates her 1969 Ford F-100 pickup as her “best buy”. “Like the Energizer Bunny, this pickup just keeps going and going. Whatever problems it might have are so easy to fix that I can do most of the work myself.”
“My best buy is my 1966 Ford F-100 pickup. It has almost 400,000 miles on it but still gets me wherever I need to go with almost no problems. It still runs great.
“In 1978 I bought a used 1967 Ford Falcon station wagon with 95,000 miles on it. Over the years I’ve put about 70,000 miles on it, yet my total cost for repairs during all that time has been only $98. That money went toward a battery, a wheel bearing, and a $15 carburetor.”
“My 1979 Ford F-100 pickup equipped with a 300 cu. in., 6-cyl. engine is my best buy. It has about 215,000 miles on it but still doesn’t use any oil. It has been a really tough and reliable pickup, and it still gets about 16 mpg. I’d definitely buy one of these old beauties again.”
One of Charlie’s “best buys” is the Ford F-100 pickup equipped with a 292 cu. in. engine he purchased new in 1962. Another is a Ford F-100 pickup equipped with a 350 cu. in. engine that he purchased new in 1973. “My 1962 F-100 has 327,000 miles on it. It still has the original engine and uses only about 2 qts. of oil every 800 miles. It runs like new. I’m also well pleased with my 1973 Ford F-100.”
On the negative side, he had trouble with a Gannon 8-ft. flip-over blade he special ordered from the factory. “The bushings the blade mount on were 5/16-in. under sized. With too much play, the first time I used the blade it fell off the framework. However, the dealer installed the proper bushings and shafts at no charge. They did a good job on it and got it working properly.”
Gene Eckmann, Bloomfield, Neb.: “My 1989 Deere 185-hydro lawn mower is my all-time worst buy. bought it used four years ago for $2,500. After a short period of time it started using a quart of oil every time we mowed. The 17 hp engine was completely overhauled, but then it wouldn't start. It mows the lawn unevenly, leaving strips between the blades. The front axle assembly fell off and it took an entire day to put it back on because two small bolts were located in a hard-to-reach position, The next time we used it, the engine leaked a quart of oil and started making a clanging noise like it was going to throw a rod. I'm disappointed with this product and feel that the cost of parts and repair work is too high. I plan to replace it. “My best buy is my 1973 Ford F-100 pickup equipped with a 390 cu, in. engine, It's on its second engine and runs like a charm, It’s the most reliable vehicle on our farm.” John D, Parker, Gates, N.C.; “Llike my Deere 4230 tractor. It has 10,000 hours on it and the engine has never been overhauled.”
Allen L. Johnson, Borden, Ind.: Allen has almost 200,000 miles on his 1969 Ford F-100 pickup equipped with a 360 cu. in. engine and says it’s a “best buy”. “I use 30 weightoil in it year around and change oilat regular intervals. I think that's helped. “My 1976 Stihl 041 chain saw is also a best buy, Other than regular maintenance on bars, chains, and carburetor, I haven't had any trouble with it. I’ve used it to cut many cords of wood. I replaced the points and condenser last fall for the first time.”
John Ottens Jr., Morefield, Ontario: “I like our Deere 780 Hydro Push manure spreader because there's no apron chain to break and you can feather the manure over the field with a twist of a knob in the tractor cab." Jack L. Matthews, Cornersville, Tenn.: “I've been superbly satisfied with my 1977 Ford F-100 6-cyl. pickup which is pushing 130,000 miles. The engine was overhauled at 90,000 miles but most everything else is original equipment. This pickup has never let me down. “My 801 Ford diesel tractor has also been dependable. Its wide wheels and low center of gravity work great in Tennessee hill country. As long as I keep the fuel filters clean, it runs fine and does everything a multi-purpose tractor should do.”
Gerald Chirnside, Holliday, Mo.: “I'm pleased with the service we've had from our Ford F100 1982 pickup with a V-6 motor and 3-speed overdrive. Gets good gas mileage even when we pull a stock trailer with it. We're very pleased with its performance under load.”
Ford pickups equipped
9 Best Buys3 Worst Buys“We really like our Parmak pigtail step-in electric fence posts (www.parmak.usa.com; ph 800 662-1038). These steel posts are designed to work with all wire, polywire, polytape and rope-style electric fences. They’re built heavy with a big step and go easily into the ground. They should last a long time.”
On the negative side, he lists his 2013 Porter Cable cordless drill equipped with a 20-volt lithium battery. “The battery is less than a year old but already it’s dead and won’t take a charge.
“I’m tired of hearing people complain about their Ford pickups equipped with the 6.0-liter diesel engine. Everyone knows this engine is a dud, so it serves you right if you go out and buy one.”
Don’s the satisfied owner of a pair of Ford pickups equipped with Powerstroke diesel engines, one a 1997 model and the other a 2001. “I’ve replaced the transmission twice on the 1997 model but the engine is still solid. This pickup has about 250,000 miles on it but still doesn’t use a drop of oil. The 2001 model has 85,000 miles. The only problem I ever had was a driveline vibration, which the dealer promptly took care of.”
“In 2004 I bought a reconditioned 1973 Ford 2000 tractor equipped with a 40 hp engine for $5,000. It works great, has a lot of power, and maneuvers well in tight places.
“My 1997 Murray 14 1/2 hp riding mower is my worst buy. I’ve had problems with the so-called automatic drive transmission. I couldn’t get the transmission back into drive after putting it in neutral. It has gone through three different transmissions.”
“My 1995 Ford pickup equipped with a 6-cyl. engine starts, idles and runs well. It’s also fuel efficient.
“My Knight mixer equipped with a twin vertical auger mixes round bales thoroughly whether they’re dry or wet. It’s equipped with weigh scales that work well.”
Omer’s “best buy” is his 1989 Ford pickup equipped with a 302 cu. in. engine and automatic transmission. “I bought this pickup used in 1990 with 25,000 miles on it. I put more than 200,000 miles on it, then two years ago I gave it to my son. It’s still going strong. Other than routine maintenance, the engine has never been touched.”
Loren likes his 2006 Dodge diesel 4-WD Mega Cab pickup. “It has a lot of power and torque and a roomy cab. It’s much more comfortable to drive and has more user friendly controls than the Ford diesel we had before.
“My 2003 Ford pickup equipped with a 6.0-liter diesel engine is my worst buy. It caused us nothing but trouble. It rode stiff and the engine was always having problems. I’m a third generation Ford owner but never again. This pickup ran great when it was running, but it wasn’t reliable.”
A Farmco 18-ft. long portable small square bale feeder that mounts on wheels rates as Danny’s “best buy” (Farmco Mfg., Ronks, Pa.). “It cost less than most other bale feeders on the market and it’s easy to move around. I just throw four or five bales in back of the wheels to make it light enough to lift the front end.
“We have a Ford 2000 pickup equipped with a diesel engine. When the weather is real cold I try to park it where I can use a hair dryer to blow into the breather. Using this technique it starts as easy as it does on a hot summer day.”
Irwin likes his 1995 Agco 9650 tractor equipped with a Deutz air-cooled engine. “It’s easy to operate and the 18-speed powershift transmission has a good selection of speeds. It’s also easy on fuel. My only complaint is that the starter is way too small and won’t start the engine in cold weather.
“My worst buy is my Dodge 3/4-ton 4-WD pickup equipped with a Cummins diesel engine. It has a lot of power and an excellent ride and starts easy in winter. However, it went through three automatic transmissions in only 62,000 miles so I traded it for a Ford pickup equipped with a Power Stroke diesel engine. It’s more fuel efficient and has more power, but it rides awfully rough and I have to get out of the cab in order to lock in the front hubs. I wish I didn’t have to do that.”
“One of my best buys is my 1978 Ford pickup equipped with a 302 cu. in. engine and overdrive transmission. It has needed very few repairs and the body has only minor rust. It has more than 251,000 miles.
“My 1950 Allis-Chalmers B tractor was a best buy. I used it for 34 years to do snowplowing, haying, logging, and hauling firewood and never had any problems.”
“It’s the best tractor I’ve ever owned,” says Victor, pleased with a 1976 Case 970 diesel he bought used 20 years ago. “It had 1,200 hours on it when I bought it and now has 6,800. It’s never been touched.”
He’s also pleased with his 1987 Ford pickup equipped with 6-cyl. engine and 4-speed transmission. “I put nearly 100,000 trouble-free miles on it. It still has plenty of power and runs great.”
Jim’s “best buy” is a 1991 1-ton Dodge pickup because of its Cummins turbocharged engine and 3:55 rear gear ratio.
“I bought it with 140,000 miles on it. It now has 170,000 and gets 20 mpg on the road. It pulls heavy loads of hay and livestock as easily as it ever did and still gets 10 mpg. One big criticism is that the rest of the truck isn’t nearly as hearty as the engine. For example, the 5-speed transmission has short bearing life and only part-time synchroniz-ers. The body is no dream, either. The top part of the driver’s side door is bent and will not close so the wind screams through it in a crosswind.”
On the negative side, Jim’s “worst buy” is a 1991 3/4-ton Ford pickup equipped with a 351 cu. in. engine with automatic overdrive transmission. “I get less than 9 mpg in overdrive. When using cruise control, it won’t hold its speed up the slightest hill or even in a 15 mph wind. The engine could best be used as a boat anchor. I must admit, however, that it has a strong, reliable body and offers a comfortable ride.
“The decision by Ford Motor Co. to eliminate the Cummins as an engine in its small trucks was not a ‘better idea’”.
David Batker, Brooklyn, Wis.: “It's powerful and has good transmission gear ranges,” reports David, pleased with his 1989 Dodge W350 4-WD pickup equipped with a Cummins diesel engine and 4-speed transmission. It replaced a 1985 Ford equipped with a 460 cu. in. gas engine. “We use it to pull corn wagons weighing 12,000 Ibs. It gets 16 mpg loaded and 22 mpg empty which sure beats the Ford’s 7 to 11 mpg.” David's “worst buy” is his 1989 Makita 6093D cordless drill . “The battery pack goes dead after about 5 min, of use. If we didn't alternate two batteries it would be virtually useless, It also has less torque than Black & Decker's cordless drill.”
Ford 3000 diesel
10 Best Buys1 Worst Buy“I just purchased a Worx chainsaw with a 10-in. blade for $155. It’s amazing and well…”
“I bought a 1971 Ford 3000 diesel with power steering at an auction. After a stick punctured the radiator last May, I decided to repaint the tractor. One thing let to another but after 4 mos., the tractor is done. It does everything I ask it to do and more. Handy size to have around my acreage.”
“I think my 1970 Ford 3000 diesel tractor is the best 40 hp tractor ever made. I’m still using it for all kinds of farm work. It cost just $3,800 new.”
“I bought a 1971 Ford 3000 diesel tractor with loader 4 years ago. I loved it so much I recently bought a 1978 Ford 4600. Stop me before I buy more!”
“My 1967 Ford 3000 tractor has more than 16,000 hrs. on it. My 1992 Chevrolet 1/2-ton pickup has more than 350,000 miles. Neither machine has ever had the engine, transmission, or rear end taken apart. They don’t look very good any more, but they always start and work all day long.
“My worst buy is my Berg Hydroman horizontal manure pump. It replaced an Agramatic pump that had worked well for 23 years. However, where the pump hooks up to the underground pipe, and where the hopper bolts to the pump, the ram didn’t ¿ t tight enough in the housing. From the start, it allowed manure to leak back. It was taking longer and longer to pump everything out, and after 2 1/2 years the pump stopped altogether as it had become bent all out of shape.
“It was partly my fault; I should have checked it out better before I bought it. This pump was built way too light to pump manure the distance I’m pumping it. I called the factory but got no help. Then I pulled the pump out and the salesman referred me to a welding shop that works on manure systems. They straightened out the bent pump and reinforced everything, but it took them 14 months. Then I got a big bill from them. I learned a very expensive lesson.”
“My Ford 3000 tractor has been the most reliable machine I’ve ever had. Neither the engine nor the diesel pump has ever been repaired. I’ve always changed the fuel filters and been careful about using clean fuel.
“I had a problem with the front axle on my Sears Craftsman riding mower. The axle was made by the Roper Co. I replaced the original axle with one made by Sears Craftsman, which I modified a little, and now I have a heavy duty axle.”
“My 1987 Ford 4-WD 4610 tractor has a lot of power and a comfortable cab.
“My 1965 Ford 3000 equipped with a diesel engine is a great tractor. It has plenty of power, is fuel efficient, and just keeps thundering away. In my opinion, it’s the best tractor ever made - bar none.”
“I bought a 1967 Ford 3000 tractor used last spring with a little more than 3,000 hours on com). it, and it’s my best buy. I use it almost every day for such jobs as mowing and raking hay, plowing, skidding logs, and much more. It doesn’t use any oil and it runs great. I didn’t like Ford tractors before, but I wouldn’t trade this one for anything else.”
“My best buy over the years is my 1967 Ford 3000 tractor. It has needed only routine maintenance. I hope my new 1995 Ford 1715 tractor works as good as this one.”
Donald N. Miller, Mt. Pleasant, Penn.: “Our Vicon CM165 disc mower is a best buy. We can pull it with our Ford 3000 tractor in 8th gear through very heavy hay. Really cuts haying time. We also use it in the folded-up transport position to trim along trails through our woods. “Our 1990 Delta sander-grinder is a worst buy. The operator’s manual said it should havea 1/2 hp motor, but the motor plate says it’s 1/3 hp. When I called the company they said it was a misprint even though they've advertised it for a year at 1/2 hp. This is the second Delta tool I’ve used that was underpowered. The first was a Super 10 table saw that burned up two months after the warranty expired.”
Bernhard Neuman, Athens, III: "Several years ago, I bought a used Ford 3000 tractor. I mounted a mower on it. The derrick I made and added helps lift a lot of things I can't handle anymore. The best part is that it's so easy to get on and off." Eddie Lefebvre, Best And Wo. (Continued from preceding pa, forms well in the snow. It gives an added feeling of safety over small cars. However, performance of the 4.3 V-6 engine and 4-speed transmission is marginal."
Ford 3/4-ton van
9 Best Buys1 Worst BuyJohn has more than 402,000 miles on his 1995 Ford 3/4-ton van. “All I’ve replaced are the alternator, heater core, fan belts, and radiator. This vehicle still doesn’t use any oil. I change the oil every 5,000 miles. It’s powered by a 6-cyl., 300 cubic inch engine and automatic transmission. I expect this van to last another 500,000 miles.”
“My best buy is my 1987 MTD 18 1/2 hp riding mower equipped with a 46-in. deck. Over the years it has needed only new belts and blades, a couple of new batteries, and a new deck shaft. This mower is still in great working condition. We use it to cut two to three acres a week.
“My 1994 Ford 3/4-ton pickup equipped with a 300 cu. in., in-line 6-cylinder engine and a 5-speed manual transmission is a best buy. It has about 140,000 trouble-free miles on it. It’s a great pickup.”
“My Sunflower 25-ft. disk leaves the ground nice and level without any ridges. It does an excellent job in heavy trash.
“My 1998 Ford 3/4-ton pickup is my worst buy. It uses too much fuel and is hard to get into 4-WD.”
Eldon likes the 1979 Ford 3/4-ton pickup. “Back then they still built pickups to last. We bought it for $1,500, then had it rebuilt like new from end to end. For about $6,500 we have a like-new pickup that doesn’t have all the computers and pollution control devices on it. It runs great and pulls a trailer even better. “My 1989 Deere 1600 swather is my worst buy. The crimper sidewalls are built too light. Both sides got bent and cracked. The company told us they knew it was a problem but didn’t offer to help pay for the repair. This swather was built poorly. We have a Mac Don now.”
Lynn Eckel, Glenwood, Iowa: A 1993 Yamaha 400cc ATV heads Lynn's “best buy” list. “I use it all the time in all weather conditions. It has unbelievable power and traction. mounted a blade on it for pushing snow. It works so well that I've stopped using my tractor to push snow. [use it to pull my Mill Creek 25-bu. manure spreader which is also a best buy (Emel Pruismann., 939 Edwards, Jewell, lowa 50130). It’s built with all-steel construction and has tractortype drive tires that allow it to go right through mud and snow. “My 1995 Ford 3/4-ton turbocharged diesel pickup will outpull a Dodge pickup equipped with a Cummins engine. It never gets less than 16 mpg with a loaded gooseneck flatbed or livestock trailer, and it: gets 22 to 25 mpg on the highway empty, “Another best buy is FARM SHOW. It's the only magazine subscribe to that's hard to put down once I start reading it. It has a lot of good ideas and many of them are so simple that anyone can make them.”
Ralph Brown, Edgewood, Iowa: “My 1993 Ford 3/4-ton turbocharged diesel pickup has a lot of power and performs well. I'm well pleased with it. » “My 1972 Deere 4020 diesel tractor had over 9,000 hours before the engine had to be overhauled. It’s a good all-around tractor.” Charles D. Corlew, Cunningham, Tenn.: Charles is impressed with his 1993 Bush Hog 3126 10-ft. brush cutter. “It's trouble-free and runs smooth, I can even mow the level parts of my yard with it. The double universal joint in front lets me turn orst Buys vious page) short. “My 1992 Bush Hog isn't built well. The blades are mounted too high and have warped. tried to remove them but couldn’t because the bolts weren't anchored in so they just spun. The rear wheel bearings weren't greased during assembly so they wore out and had to be replaced. I sent a registered letter to the company and they signed for it but they never responded. The gearcase cover consistently shook loose, causing grease to leak out. I was constantly losing the blades on the right side of the machine.”
Willard Donahey, Utica, Ohio: Willard’s pleased with his three Wheel Horse riding mowers. “Two are 16 years old and one is 6 years old. “My 1978 Ford 3/4-ton 4-WD truck has 149,000 miles with no problems. I've never touched the engine. Itruns good and doesn't use any oil.”
Stan Rath, Medicine Hat, Alberta: “T’ve driven Fords since 1967 but this will be my last one because the quality of the productis going down,” says Stan, unhappy with his 1987 Ford 3/4-ton 4 by 4 pickup. “We've had problems with the brakes and have broken plastic components such as the clutch master cylinder. Important parts should be made from metal.” On the positive side, Stan’s happy with his 1988 New Idea round baler. “It’s a super machine that’s simple to operate. It makes excellent soft core bales which allows me to bale at higher moisture levels to reduce leaf loss, I also use it behind my rotary combine to make straw bales.” Mike Reichart, Tallula, Ill; “It does a tremendous job in solving compaction problems,” says Mike, happy with his Tye Paratill plow. “It loosens more soil and leaves more residue intact, so it's ideal for no-till”
Diane Morrill, Sherwood, Mich.: “My 1986 Ford 3/4-ton 4-speed pickup has 15,000 trouble-free miles on it hauling loads of up to 3 tons across fields. Mud or snow can’t stop it. It’s got power that never quits.”
Edward Smith, Poplar, Mont.: A 1972 Ford 3/4-ton 4-speed camper special pickup is his “best buy”. “I've been looking for a pickup of this vintage and shape for some time as they're heavier and tougher than the new models. They're also simpler and easier to work on, smooth riding, and nice on the road.”
Ford 4-WD pickup
9 Best Buys1 Worst BuyIn 1988 Klutzke bought a 1979 Ford 4-WD pickup that had been repowered with an Allis Chalmers 4-cyl., 200 cu. in. turbocharged and intercooled diesel engine equipped with a C-6 automatic transmission. The engine came out of an Allis Chalmers 6080 tractor.
“The pickup had about 130,000 miles on it when I bought it. Now it has about 300,000 miles but it still doesn’t use any oil,” says Klutzke. “Chuck Dunlap, who was the head mechanic for 26 years at the Allis Chalmers dealership in Rensselaer, Ind., installed the engine. I asked him how much power the 6080 engine had. I assumed it had 80 to 85 hp, but he said the dynamometer showed 102 hp. I asked him how he was able to increase the power that much, but he would only reply ‘that’s my secret’.”
“This machine mows beautifully,” says Kenneth about his 2007 Grasshopper ZTR mower equipped with a Kubota diesel engine and 60-in. mid-mount deck. “I don’t get tired using this mower, even though I use it to cut several acres of yards every week. The diesel engine runs great and the mower has all the blade and ground speed I could want. It’s also easy on fuel.
“I also like my 2002 Ford 4-WD crew cab 4-WD pickup equipped with a Powerstroke engine. It runs and drives great and has a comfortable seat. No problems after about 92,000 miles. It’s also fuel efficient.
“I bought a used 2000 Dodge pickup equipped with a Cummins diesel engine. It only has about 130,000 miles but doesn’t ride or drive well at all. This pickup always seems to need something whether it’s transmission work, electrical problems with the blower motor, and so forth.”
Frank Allen, Kenton, Tenn.: Frank's more than pleased with the Chevrolet Silverado 4-WD pickup he bought new in 1993. It now has 30,000 miles. “It drives and rides like a Cadillac with plenty of head and shoulder room. Its 350 cu. in. engine is extremely powerful and gets better than 18 mpg, almost twice what my old Ford 4-WD pickup got. I'll never buy another Ford. “My worst buy was a Case-IH Magnum 7130 tractor equipped with front-wheel-assist. The hydraulics are a joke. The power lift leaks down while the tractor is in operation. You have to push the lift lever down and then pull it back up to reset it, It sometimes blows the hose end out of the outlets when lifting an implement. The engine had to be overhauled at 2,000 hours, It drives and rides like a log wagon compared to Deere tractors I’ve owned.”
Jimmy West, Roxton, Texas: Jimmy says the Fish carburetor he installed on his Ford 4-WD pickup (Brown Carburetor Co., Inc., P.O. Box 298, Groton, S. Dak. 57445) isa “best buy”. West uses the pickup, which is equipped with a 360cu. in. engine, to pull alivestock trailer. “The carburetor increases the engine’s power and provides smooth acceleration and idle at low rpm’s. I plan to replace the factory carburetors on all my Ford pickups and tucks with Fish carburetors.”
Michael A. Perino, Braceyille, IIl.: “My 1986 Ford 4-WD F-150, with 300cu. “Whenitidles, the whole truck shakesand shimmies.” in, engine, doesn’t run very well. When it idles, the whole truck shakes and shimmies. It’s been back to the dealer 4 times. Each time he tells me it’s the gas. Finally, I talked to the Ford rep. At this time, I’m supposed to get a brand new carburetor. We'll have to wait and sce if it improves the truck.” As “best buy” he nominates his 1975 Deere 4400-D combine with 1,175 hrs., bought used. “Performs well and handles like a dream. The dealer has done everything he said he would and more.”
Ed Moore, Marlinton, West Virginia: "A 2110 Ford 4-WD tractor is the best buy I've ever made. It'll go anywhere. I use it to feed cattle, haul big round bales, and rake and haul hay. Has a good hydraulic system." Ed names his Allis Chalmers 6060 as "worst buy”. "The hydraulic system is helpless. I've had it back to the dealer three times. Every time I get it back it's worse. The control valve opens too fast or not at all. I'm afraid to use it since it comes up all at once. It's bent lift arms and once threw a disk up on the back of the tractor." G. Gillis, Point Prim, Prince Edward Island: “Our best buy is a New Holland 975 combine bought in 1969. It cuts an average of 400 acres per year and is still going strong."
C.F. Nolen, Martinsville, Virg.: ‘I own a 1985 250 Ford 4-WD diesel that has 19,000 miles. I'm disappointed in the power. When I change gears with a load on, it smothers out. The clutch is also real rough.”
Roy West, Dumas, Ark.: “I bought my 1985 Ford 4-WD diesel pickup last year and it's proven to be everything I'd heard it would be, It's required very little maintenance and has plenty of power, even at low rpm's. Handles well and never runs hot, even on hot summer days doing jobs that require lots of idling.”
Quadrunner ATV, Roy West, Dumas, Ark.: ‘I bought my 1985 Ford 4-WD diesel pickup last year and it's proven to be everything I'd heard it would be, It's required very little maintenance and has plenty of power, even at low rpm's. Handles well and never runs hot, even on hot summer days doing jobs that require lots of idling.”
Alvin Pearson, Ellsworth, Wis.: “It really handles nice and is much easier on my Ford 4-WD pickup than the 16-ft. bumper hitch trailer had been pulling,” says Alvin, pleased with his Kiefer-Built 18-ft. gooseneck cattle trailer. Alvin says his second “best buy” is his Campbell-Hansfeld airless paint sprayer. “It has lots of capacity with a 1/3-hp. motor and pressure up to 2,500 psi. [bought it to paint my 40-ft. by 100-ft. quonset-type machine shed.”
Ford 7710 tractor
9 Best Buys1 Worst BuyCristol says he’s “generally satisfied” with his 1985 Ford 7710. “It had some major problems early on that were ‘kind of fixed’, but then the dealer went out of business and now there’s not a dealer within 120 miles of me. I have three Ford tractors and the nearest dealer doesn’t stock parts for any of them. I have to order the parts and wait for them.”
“My 1990 Ford 7710 tractor is my worst buy. The transmission was hard to shift and would jump out of 2nd gear. It was also hard to get in reverse. The dealer repaired the transmission four times but it still didn’t shift right. He finally replaced my tractor with a Ford 7740.”
Donald R. Morris, Kearney, Mo.: Donald’s pleased with his 1989 Ford 7710 tractor, but says it could use a couple im* provements. “The clutch and brake pedals are too close together and the hydraulic hose tips are junk. I replaced them with the same tip that’s used on Massey Ferguson tractors. , “My 1988 Hesston 1050 disc mowerconditioner is a best buy.”
James McMillan, Phillipsburg, Mo.: “It's well designed and well-built. No trouble after 800 hours of use,” says James about his 1990 Ford 7710 tractor. James's Deere 212 lawn mower is a “worst buy”. “The pretty green hood was expensive and it sure didn’tmake the mower work any better. It wouldn't cut level, even with anew deck. No mechanic could keep it running for the full five hours it took to mow my yard. I traded it in and bought an 8-year old Grasshopper that mows the same yard in 1 hour and 45 minutes without a bit of trouble. The Grasshopper is the ugliest lawn mower on the market, but the best for satisfaction and dependability.”
John Aasen, Whitehall, Wis.: John’s “best buy” is his Steiner 420 4-WD lawn tractor equipped with a 60-in. mower, 60in. blade, broom, and snow blower. “I use the blade to clean the second floor of my two-story broiler house. It cuts my cleaning time in half, and all attachments are quicktach so I can change equipment in two minutes or less. I’m so pleased with the unit that I became a dealer.” On the “worst buy” side, “The rear drive wheel broke off on my 1990 Ford 7710 tractor, smashing the fender and part of the cab. The company fixed the wheel, but the fender and cab aren't part of the drive train so they aren’t covered under warranty.”
Eugene Frodl, Whitewater, Wis.: “Our 1985 Ford 7710 is a best buy. Our only trouble has been a clutch which the company and dealer took care of rightaway. I'm real pleased with it. “We also like our 1986 Ford Crown Victoria auto. We haven't had any trouble. My wife likes to drive it because with fuel injection you don’t have any cold weather stalls. We get good mileage.”
Randy Jacobs, Alden, Minn.: “The Magrath livestock prod hasa very hot spark that really gets hogs moving. Before owning one we really worked to gethogs loaded, Now they can’t wait to get on the trailer.” Thomas W, Rhodes, Horseheads, N.Y.: “Our 1982 Case 1690 broke down every spring and fall each of the five years keptit. A hydraulic line cracked at the pump 4or5 times, The drive shaftto the hydraulic pump broke once in the second year of use. "It broke down every spring and fall each of the five years I kept it." Two soft plugs in the block rusted through and I had to split the tractor to replace one of them, The crankshaft pulley loosened up twice completely stripping splines from the pulley and rounding off splines on the crankshaft. The second time the crankshalt pulley came off, we traded for a 1986 Ford 7710, which is my best buy. It does everything we want it to and we've had only one small problem which the dealer took care of immediately. Very roomy, comfortable cab. The more I use it, the better I like it.”
Leland Matson, Burns Lake, B.C.: “We bought our 1982 Ford 7710 4WD tractor with 783 hrs. It handles well, has good power, starts well, has a nice quiet cab and has a good turning radius in close quarters. However, the Ford front-end loader which came with the tractor is disappointing after the loaders we had on 2 previous tractors. Lifting height is poor for the size of tractor and loader and lift power is inadequate especially on tilt.”
Keith Davidson, Chickasha, OkL.: “My 1985 Ford 7710 with front wheel assist had several problems that the dealer took care of but a new tractor shouldn't have this many things go wrong. The engine had oversize valves in standard guides, the load monitor had to be replaced and both rear wheel seals and one front seal leaked.” As “best buy” Keith nominates his New Holland 855 round baler. “There's never any problem starting a bale. Makes a good, solid bale.”
David McKay, Lone Wolf, Okla.: '1 boughta Morton building due to their fine reputation and their warranty. I haven't seen anything good about either," says David upset with his "worst buy" 54 by 72-ft. Morton wood truss barn. 'Trusses and posts appear to be failing within the structure. Company representatives say don't have a problem until there is an actual failure." David likes his Ford 7710 tractor with front-wheel assist. ''It has extra-ordinary power and maneuverability for a tractor of its size. Hydraulics are very responsive, espe cially when operating a front-end loader. Out-performs larger tractors and is easier to service."
Ford 9N tractor
9 Best Buys0 Worst Buys“My best buy is a 1941 Ford 9N. It looked scary, and I put tons of money into it, but it was well worth it. It still runs like a champ.”
Steve didn’t have a positive experience with a 1953 Ford Jubilee. “I overpaid for a non-running tractor. I sent it to my retired farmer father-in-law, and then we found out the fire deck was warped, so we got another engine. Dad got that running, and the throttle stuck, throwing a rod through the block. So we went back and machined the original, and after paying more than double the quoted price, we got it in and running. We paid a guy to set the timing and such. A week later, we took it home only to find out it couldn’t drive up a hill.”
“The Ford 9N tractor my dad bought in 1941 is my best buy. We used it almost every day until 1957 for field work and to make trips to the store, or wherever it was needed. We put about 1,000 hrs. per year on it. Despite all the hours, this little tractor has needed only two engine overhauls and repairs for a broken axle. My dad kept the tractor inside a shed and changed the oil regularly, which he credits for the tractor’s long life.”
“The 1953 Ford 9N tractor I bought used in 1992 is my best buy ever. It always starts and mostly has required only routine maintenance. I’ve replaced the front tires and radiator as well as spark plugs and plug wires. I’ve owned other tractors over the years, but none of them could ever replace my little Ford 9N.”
“Carl’s happy with his 1942 Ford 9N tractor, and a home-built tractor he calls his Baby N. “I painted it the same color as the 1950 8N that I grew up driving as a kid. I prefer the 8N color.
“To build the Baby N I bought an Awesome Henry V-8 Ford conversion kit and installed it on a Kubota tractor’s frame (ph 937 497-9447; www.awesomehenry.com). My Baby N has the 8N’s dash, running boards, and a flip-up seat. Last winter I added a 3-pt. hitch that’s operated by an electric linear actuator. I also built a bush hog, turning plow, and light disk cultivator for the Baby N.
“I also own a 1945 Ford 2N, 1954 Ford Jubilee, 1955 Ford 600 and 800, and 1975 Ford 2000.”
“My 2011 Kubota BX24 tractor-backhoe works great. No problems and it’s easy on fuel.
“Our old Ford 9N tractor still starts good and does a great job.”
“We bought a used 1940’s Ford 9N tractor about 10 years ago to use for disking, field cultivating, and forklift work. It has performed well, requiring only routine maintenance. It’ll even pull a subsoiler 1 to 2 ft. deep, depending on the soil conditions. It still doesn’t use much oil.
“Our 1999 Chevrolet Suburban K1500 is our worst buy. We bought it used a couple of years ago with about 118,000 miles on it. Since then it has required $2,600 worth of parts, which is more than the vehicle’s going street value. The vehicle’s serviceability stinks. It takes my two teenage sons 1 ½ hours to change the water pumps on a Dodge 1500 pickup, whereas the same job on this vehicle takes about five hours. Repairs have been made to the water pump, power steering pump, power steering gearbox, and more. I’ll never touch one of these vehicles again.”
Norman’s the satisfied owner of a 1939 Ford 9N tractor equipped with a front-end loader and 3-pt. hitch. “I never owned a tractor in my life until I moved out of town to a 1-acre lot on agricultural land. The place was a mess when I moved here, but with the help of my little Ford, my land is now well groomed. This tractor never misses a beat. All my equipment is old like me, but we’re all still running good.”
“Twentyfive years ago I paid $250 for a 1946 Ford 9N tractor, and it’s absolutely still my best buy ever. I converted it to 12 volts and added a power steering pump that piggybacks off the alternator. This makes it easier to run my front-mounted snowplow. I also added a Sherman overdrive.
“Our best buy was a 1939 Ford 9N my dad purchased as a demonstrator in the spring of 1940. The Old Racket Box, as we called it, averaged 100 hours a year for 17 years. It was used for plowing and feeding cattle and spent countless hours on a belt pulley powering a wooden Keystone peanut picker. Besides general maintenance, the tractor had only one engine overhaul, one broken axle and one repair to the 3-pt. in the 17 years we owned it.”
Ford Escape equipped
5 Best Buys4 Worst Buys“When my brother and I farmed, we had two Farmall 1456 Turbo’s. They were the best tractors on the farm, without fail. Very fast and efficient.
“My worst buy is a 2017 Ford Escape. It has been trouble since day one.”
“I’ve used Amsoil lubrication products for 10 years with excellent results. Their 2-stroke engine oils are by far the best on the market and eliminated the problems I used to have with fuel quality. Amsoil small engine oil also works great.
“I’ve put about 126,000 miles on my 2012 4-WD Ford Escape equipped with a 3-liter engine. The 4-WD works great on ice and snow-covered roads, and the engine gets better than rated fuel economy with plenty of power. I think one of Ford’s biggest mistakes was getting rid of their 3-liter engine. The vehicle’s body shows some rust, but that’s to be expected in Minnesota.
“The only vehicle I like better than the Ford Escape is my 1990 Buick ATB LeSabre, which is equipped with a bullet-proof 3.8-liter engine. I bought the car used at about 60,000 miles, and when I finally sold it at about 268,000 miles the engine and transmission had never been touched. The new owner ended up with almost 300,000 miles before the body gave out.
“My 2018 Lincoln Electric TIG 200 Square Wave welder works great for both AC/DC stick and TIG welding, so I’ve been able to use it on several different projects. It has simple controls so anyone can make excellent welds. I have about 30 years of welding experience in industrial applications and have used welders that cost many times more than this one, but they didn’t work any better. It makes excellent welds on aluminum.”
“Two years ago I drove my 2011 Ford Escape back to the dealer because it had 2 big rust spots on both rear wheel wells. The body was supposed to be covered by the 5-year warranty, but the dealer wouldn’t honor it.”
“The 2002 Ford F-250 diesel pickup I bought used in 2010 still starts and runs like new. No problems even in the coldest weather.
“I’ve put about 100,000 miles on the 2010 Ford Escape I bought used three years ago. It’s very dependable.”
“I like my Kubota 3240 and 327 tractors, Honda CRF 230 and Husky 310 TXC motorcycles, 2010 Ford Escape, 1999 Subaru Forrester, and Stihl chainsaws. All of them run well, work hard, and are dependable.
“The second week after I bought my Deere LA 175 garden tractor, a tie rod arm broke. The dealer said I caused it, but you could see half the break had rust on it so the part was defective. We’ve had lots of other problems with this tractor.”
Jerry likes Hydrotex Essentialube lubricant and M33 grease (www.hydrotexlube.com; ph 800 527-9439). Essentialube can be used as a fuel additive and to do other jobs such as to free rusted parts, loosen dirt, dissolve grease, grime, tar and adhesive, and lubricate moving parts.
“I’ve been using these products for more than 40 years. Essentialube reduces harmful deposits in engines and causes diesels to start easier,” says Schulz.
“My 2014 Ford Escape rides nice and is fuel efficient.”
“My 2011 Ford Escape all-wheel-drive SUV is fantastic. It gets 22 mpg and is neither too large nor too small. It rides and drives great with no rattles, squeaks or wind noise. It’s a great vehicle.”
“My 2004 Ford F-250 4-WD pickup equipped with a 6.0-liter Powerstroke engine is a true workhorse, with more than 230,000 miles on it. It has needed only a couple of trips back to the dealer for minor repairs.
“My 2006 Ford Escape has about 176,000 miles with only routine maintenance.”
He’s disappointed with his two Echo straight shaft weedeaters and an Echo gas-powered blower. “I can’t even go one year using these products without some kind of problem. And trying to deal with Home Depot on warranty work is a whole story in itself.”
“I’m well satisfied with my 1985 Massey Ferguson 1040 diesel tractor equipped with a Massey Ferguson 232 front-end loader. And I like my 1998 Deere 425 garden tractor equipped with a 54-in. mower deck. Both tractors are well-built and have required only routine maintenance.”
On the minus side, “The transmission on my 2001 Ford Escape failed at 51,000 miles. It happened when I was 250 miles from home and after the warranty had expired. The transmission cost $3,300 to repair and was at the dealer for 2 1/2 weeks. I also had to spend $400 on a rental car while the vehicle was in the shop. I immediately replaced the Ford with a 2003 GM Envoy, which I really like. However, just in case anything goes wrong I bought it with an extended 100,000-mile warranty.”
Ford F-150 SuperCab pickup equipped
8 Best Buys1 Worst Buy“In 2012, I factory ordered a Ford F-150 SuperCab with heavy GVW and tow package. In 125,000 km it has only been back to the dealer once for a transmission recall that took half an hour.”
A 2014 Ford F-150 Super Cab pickup equipped with a 5.0-liter V-8 engine rates as William’s “best buy”. “It has been trouble-free and dependable. I didn’t buy this pickup for its fuel efficiency, but I was pleased and surprised to get 22.7 mpg on the highway and 19 to 20 mpg with general use.”
“I’ve put a lot of miles on my 2013 Ford F-150 Super Cab pickup and find it to be the perfect vehicle for my wife and me. We live in the mountains 10 miles from any paved road and have many rough creek crossings. No problems.”
A 2004 Ford F-150 Supercab pickup rates as Harley’s “best buy”. “I bought it used and have put more than 50,000 miles on it with no major repairs. It’s very roomy and is fuel efficient for a large pickup.”
“My 2005 Ford F-150 Super Cab pickup is built cheap and is my worst buy. When I drive it on the road both the hood and the bed bounce up and down, and whenever I hit a bump the mirrors and doors rattle terribly. I’ve taken this truck to three different Ford dealers and they all say the same thing - because of the truck’s design and construction, nothing can be done about the rattles. They say ‘You’ll just have to live with it’. I contacted the company’s customer service center and they said the same thing. It’s disgusting when you have a new truck and it rattles so bad that’s it’s embarrassing to let anyone ride in it.
“The truck has only about 12,000 miles on it but already it has transmission problems. It stutter shifts. The service department at the last Ford dealer I took it to drove it and knows it has a problem. Because it won’t show up on their diagnostic test, Ford won’t let them tear the transmission down.
“Two months ago a Ford mechanic disassembled the steering column to put a spring in the ignition. Now I can be driving along and the cruise control will shut down. Again, because it passes all their tests Ford won’t let the dealer work on it.
“If you want an extended cab truck that’s low quality and poorly constructed, with no dealer or factory support, then a Ford F-150 Super Cab is the pickup to buy.”
Charles is impressed with his 2004 Ford F-150 Super Cab Lariat pickup. “This is my eighth new Ford pickup in 24 years, and I think it’s the best one yet. All I have to do is change the oil. It runs smooth and quiet, and the 5.4-liter engine has a lot of power. It averages about 16 mpg.
“My Hauler J-93 from Kimball Products is a 4-wheel utility vehicle that leaves a lot to be desired. It’s powered by a 16 hp engine and rides on large, knobby tires that look like the ones found on World War II Jeeps. It has a noisy transmission which had to be replaced twice by the factory. The transmission isn’t quite as noisy now but the noise is still there. The factory won’t do anything more to help. The brakes stick and I have to constantly readjust them, and the paint job is blistering on the hood and fenders. The company sent me a 16-oz. can of spray paint. I did all the labor myself, with no financial help from the company.”
“I like my 1997 Ford F-150 Super Cab pickup. The 4.6-liter, V-8 engine has a lot of power and the third door makes access to the rear seat much easier. Even though it has a long bed it rides softer than most cars I’ve owned. No problems so far.” Henry F. Heagley, Heagley Harvesting,
Francis J. Weber, Jesup, Iowa: “My 1992 Ford F-150 Supercab pickup is equipped with a 300 cu. in. 6-cyl. engine and 5-speed transmission. It rides nice, has plenty of power, and is fuel efficient. No problems, Ithas 20,000 miles and I’ve never had to take it back to the dealer.”
William Atwater, Hayana, Ill: A 1993 ford F-150 Super Cab 4-WD pickup equipped with a 351 cu. in, engine and an overdrive transmission heads William’s “best buy” list. “Itrides like a car and is fuel efficient considering it’s 4-WD and has an overdrive transmission. It gets at least 14 mpg alone, and when pulling a 29 1/2 ft. trailer it gets 9 1/2 mpg. It’s a pleasure to drive.”
Ford F-150 XLT pickup never fails
7 Best Buys2 Worst Buys“My 2011 Ford F-150 XLT pickup never fails to start, even in the coldest weather. It doesn’t use any oil and hasn’t had any mechanical problems.”
“As much as I hate to say it, my 2015 Ford F-150 XLT extended cab 2-WD pickup is a worst buy. The Eco-Boost 2.7-liter, V-6 engine has an advertised fuel mileage of 24 mpg city and 27 mpg highway. But after putting about 8,000 miles on this pickup, mostly on long trips, the best mileage we’ve gotten is 21.7 mpg. That’s about 25 percent less than advertised.
“The Eco-Boost engine does have amazing power for its size. However, the seats are extremely hard and uncomfortable, the steering and brakes are extremely touchy, and there’s way too much wind noise for a $35,000 vehicle. Also, whenever the pickup hits a pothole, it sounds and feels like its front end is falling off.”
“I like my 1997 Ford F-150 XLT pickup equipped with a 4.6-liter engine and automatic transmission. I put about 300,000 miles on it with no problems, except that at 210,000 miles the alternator went out. I always changed the oil every 3,000 miles. When I traded it off after 10 years, it still had the original battery in it.”
“I like my 2007 Ford F-150 XLT pickup equipped with a 4.6-liter, V-8 engine. It has a lot of leg room, hauls like a truck, and drives like a big Cadillac. It gets at least 20 mpg. My wife drives a 2007 Mercury Grand Marquis but we always travel together in the F-150.
“My 1980 Ford F-100 pickup still runs great. I installed a Ford F-350 4-speed transmission in it.
“My worst buy is my Kubota MX5100 tractor equipped with a front-end loader. For the pto to turn at 540 rpm’s the engine has to turn at 2,700 rpm’s, which is way too fast. The drive train is noisy in all gears, as if they’re not meshing right. I brought the tractor back to the company but they said nothing is wrong. The tractor only has 11 hours on it.
“I own a Massey Ferguson 150, Ford 601, and two Farmall Cubs and haven’t had any problems with them.”
William’s happy with his 1981 Ford 6700 tractor. “It just sips fuel compared to our other tractor. It has about 6,500 hours on it and is a pleasure to operate.
“My 1980 Ford F-150 XLT pickup has about 185,000 miles on it but still runs good and doesn’t use any oil.
“My 1984 Honda 200 4-wheel ATV is a best buy. We use it to spray, seed crops, and check and feed our cattle. This machine is easy on fuel.”
“My son has a Snap-On wire welder which is a worst buy. He can’t get parts for it and the dealer is no help. It will be the last Snap-On tool on this farm.”
“I bought my 1992 Ford F-150 XLT pickup used several years ago and it’s my best buy. It now has about 150,000 miles on it but still runs great with no problems. Ford pickups are very reliable - I won’t drive anything else.
“My 1983 IH 6388 tractor, which I bought used two years ago, is a best buy. It runs great and is economical. I wish my 1981 IH 1486 tractor worked as well. I bought it used and was able to put only about 100 hours on it before the rear end, hydraulics, and steering went out. I had to spend a lot of money on repairs.”
“I’m well pleased with my 2000 Ford F-150 XLT pickup. It has about 18,000 miles on it and so far my only expense has been for gas and routine maintenance. It rides and drives as well as a passenger car.”
“I’m happy with my 1997 Ford F-150 XLT extended cab pickup. I like the way it drives and handles on the road. I do a lot of highway driving and it has a very comfortable ride.”
Willis Harder, Moundridge, Kan.: Willis is pleased with his 1992 Ford F-150 XLT pickup, but says it could use one improvement. “I wish it got better mileage. Itgets only 14 to 17.5 mpg. However, we've driven 18,000 miles with no mechanical problems. On the negative side, “I've had trouble with my 1991 Crustbuster 3300 doubledise drill. This drill has engineering deficiencies, The ground drive system is very complicated and hard to lubrigate. One drive broke the second day. Also, the markers are clumsy and unwieldy which makes it hard toplantclose toa fence or other obstruction. The drill cost 20% less than a competing brand, but it was no bargain. Dealer service, however, has been good.”
Ford 1-ton pickup equipped
5 Best Buys3 Worst Buys“Our 2005 Ford 1-ton pickup equipped with a Powerstroke 6.0 diesel has been a disaster,” says Wayne, who called recently to tell us his story. “We bought it new last August and had to replace the head gasket at 800, 1,200, and 1,800 miles. It spent 40 days in the shop during the first 15,000 miles. We haul hay for a living so that was a real problem for us. In fact, since buying this truck we figure we’ve lost about $40,000 in business.
“We’ve been in touch with the Kansas attorney general and he said the 6.0 diesel is the worst case of product failure he’s ever seen. The engine was made by International, but Ford has been spending millions trying to keep them running.
“Our dealer was good to us, but it was when we started working with the next level up of Ford customer service that we had problems. They made lots of excuses and wouldn’t call us back. As time went on and we continued to work on this engine, we discovered that some of the portholes in the head for cooling fluid were not open. That’s apparently why it runs so hot. For example, you can’t keep your feet on the floor of the passenger side because it’s so hot.
“We finally got the name of the national head of customer service for Ford. My wife, Gail, called Detroit and was actually put through to his voice mail. She left a long message about the pickup and the poor customer service we were receiving from his regional managers. We figured that would be the end of it, but three hours later we got a call from Ford saying they’d buy the pickup back from us. It took 6 weeks to work out the final details but in the end they finally wrote us a check for the full retail price of $35,000, even though we had only paid $28,000. They also paid for the flatbed we had put on it, and some other accessories, for a total of $38,246. During the time we were working out the deal, they fixed the pickup one more time and asked us to give it another try. They guaranteed we’d be happy this time. We said we’d do it if it wouldn’t void our buy-back deal. We didn’t get 50 miles out of town before the fuel pump went out. We think the fuel pump, and other parts, had been damaged by the high heat put out by this engine.
“Ford spent a lot to remedy this situation, especially if you add up all the hotel and travel expenses they had to pick up over the past year for us. They did everything they could to make us go away but we kept working away at them.
“My wife and I would be happy to help anyone else who’d like advice on how to handle a bad situation with Ford. Write us at 51 E 550th Rd., Overbrook, Kan. 66524 or call at 785 255-4579.”
“I bought my 1993 Volvo 940 car used with about 216,000 miles. It now has more than 250,000 miles but still runs perfect. Over the years I’ve bought many high mileage Volvo cars and have found that you can’t wear them out. Unfortunately, I haven’t had the same luck with Ford or GM pickups.
“I bought a new 1989 Ford 1-ton pickup equipped with a 7.3-liter diesel engine. The engine went bad at about 89,000 miles and cost $6,000 to fix. I traded it for a 1994 GM 1-ton pickup equipped with a 6.5-liter diesel engine, and it has had a lot of problems with the electronic injection. Both heads cracked at about 65,000 miles and had to be replaced. It has about 94,000 miles on it and has a severe blow-by problem, so it’ll be going to the shop again soon. If Volvo ever made a 1-ton crew cab dually pickup, I’d buy it.”
“They don’t make ‘em like this any more,” says Ron about his 1967 Ford 1-ton pickup equipped with a dump box. He also owns a 1969 Ford 1/2-ton pickup. “Both pickups are still working great.
“I also like my Ford 1910 4-WD tractor. It’s amazing what this little tractor will do.”
On the “worst buy” side, he lists the Ryobi battery-powered drills he uses at his job. “I can’t get much use out of these drills because the batteries always seem to be drained. I’d never buy any of the company’s 12-volt, 18-volt, or 14.4-volt models. Some of the good battery-powered drills I’ve used include DeWalt, Panasonic, and Bosch.”

John’s “best buy” is his 1975 Ford 1-ton truck equipped with a Farmhand loader on back. He bought it at a farm auction two years ago and it now has 60,000 miles on it.
Read the whole story →Jeff Potter, Redwood Falls, Minn.: Jeff says his 1974 Deere 4430 tractor heads his all-time “best buy” list. “It has 9,000 hours onitbut the engine hasn't been touched. We had the injectors and pump checked at6,500 hours and they were still within specifications. It starts good even in cold weather and doesn’t use any oil. I use it to plant over 1,500 acres every year. It just keeps going and going. “My 1987 Ford 1-ton dually crewcab pickup is a worst buy. The heater core leaked, the anti-lock brake light kept coming on, and the clutch slave cylinder went out twice. The starter doesn’t engage all the time even though we’ ve worked on it twice, and the front tires wear uneven. It’s also a cold-blooded starter.” Jim Holkesvig, Mayville, N.D.; Jim's “best buy” is Agri-Cover grain box tarp (K and G Sales, Mayville, N.D. 58257). “It installs and rolls easy and stays tight even if it’s rolled only half way across the box. Be sure to get the 12-in, end caps.”
Bunkie Smith, Philadelphia, Miss.: Bunkie’s “best buy” is his Double 8 milking system from De Laval. “The plate cooler works well and the cooling compressors shut off 10 min. after milking. “My worst buy is my 1986 Ford 1-ton diesel pickup. In just 50,000 miles it’s gone through four clutches, four batteries, an injector pump, a starter, anda fly wheel, The company should be liable for this mess.”
Ken Boles, Center, Texas: "My 1986 Chevrolet 1-ton with 454 engine and 4-speed tansmission is powerful, quiet and drives great. Has excellent braking power and, when driven properly, gets good mileage considering the size of the engine. I also have a 1978 Chevy 1ton with 117,000 miles that's never been in the shop." He's not as happy with a 4-speed, 1985 Ford 1-ton with diesel engine and 4:10 differential. "Poor power and the brakes were very inadequate, especially when it rained. I never got over 12 mpg. Clutch went Out at 13,000 miles and both expensive batteries went out at 12,000 miles, Also had trouble with the front end. Paid $2,300 extra for the diesel package, then had to discount $3,000 "Paid $2,300 extra for the diesel package, then had to discount $3,000 when I sold it." when I sold it.”
Robert Bunch, Vernon, Tex.: ‘My 1983 Ford 1-ton diesel truck has had five head jobs, one new crankshaft and is now ‘blown’ due to antifreeze traces in the crankcasé — less than 200 miles after the heads were redone the fifth time. The dealer replaced the warrantied transmission with a rebuilt but denied warranty and responsibility for recent engine failure,” Robert lists his Deere 530 round baler and Deere 4250 tractor as best buys. ‘‘The baler builds a perfect bale in as little as 142 min. We've had no down time in 1,250 bales and have had to replace only two belts. The tractor has a 15-speed power shift and puts out more power and is more economical than represented.”
Ford 4610 tractor
7 Best Buys1 Worst Buy“My United Farm Tools 500 no-till drill is built heavy enough to get the job done and is made to last.
“My Ford 4610 tractor is small enough to be maneuverable yet big enough to do heavy work.”
On the “worst buy” side, he lists his 2003 Radio Shack wireless driveway alarm. “It worked for only about one week, and the guarantee was no good.”
“Our Ford 4610 tractor handles good and is fuel efficient. The only problem is that when making a left turn, the left front tire rubs on the steering control rod which comes from the steering wheel area to the front of the tractor. I think this problem could have been avoided with better engineering.”
Linden likes the handling and fuel economy of his 1989 Ford 4610 tractor.
“However, when making a left turn, the left front tire rubs on the steering control rod which comes from the steering wheel area to the front of the tractor. Seems like a glitch that could have been avoided by some common sense engineering.”
He’s also generally satisfied with his 1989 Ford 7210 tractor equipped with a bucket and forklift. “The operator could have a better view of the forks. Otherwise, it works fine.”
Ted Bauman, Freeman, Mo.: Ted installed engine replacement parts from T,T.P, Inc., of Warsaw, Ind., on his 1963 Super 90 Massey-Ferguson diesel tractor and says they're a “best buy”. “I purchased new valve train components including valves, springs, and locks and all the gaskets necessary to reinstall the cylinder head for about 60% of the price Massey-Ferguson would Have Cilla atu MV UN oii poartto. simy sv original equipment Perkins parts - the same ones that Massey-Ferguson uses. They've performed well under heavy use. “My 1989 Ford 4610 tractor is a best buy. I leased it from Ford Motor Credit for a year, then purchased it in 1990 after the lease expired. When bought the tractor it had 330 hours on it with one year lefton the warranty. It cost $5,000 to $6,000 less to buy than a brand new tractor with the same equipment. Those would have been 330 very expensive hours if I had bought the tractor new.”
David Anderson, Grant, Ala.: “This is the most expensive pile of junk I’ve ever bought,” says David, unhappy with his 1987 Ford 4610 tractor. “It has only 500 hours, but already the engine has been overhauled twice and it still uses some oil. The remote valves work slow and don’t hold light implements up. The valves start leaking as soon as I release the lever.” On the positive side, “My 1988 Chevrolet 1/2-ton 4-WD pickup is the best I’ve ever owned. The 350 engine has plenty of power and the 4-speed automatic transmission shifts smoothly. This pickup averages 13 mpg even when I pull trailers on short trips. The 4-WD works great without making the ride rough. My only complaints are the dash design and the rear bumper - it’s only strong enough to pull a boat trailer.”
Harold Jamieson, Beatrice, Neb.: He likes his 1986 Ford 4610 diesel tractor. “It’s an excellent loader tractor that handles big round bales very well. I also use it for cultivating. No problems at all.”
Harold Jamieson, Beatrice, Neb.: He likes his 1986 Ford 4610 diesel tractor. “Tt’s an excellent loader tractor that handles big round bales very well. I also use it for cultivating. No problems at all.”
McCall Creek, Miss.: “It’s virtually maintenancefree and never plugs up even in thick, wet or blown-down hay,"’ says Melvin, pleased with his 1985 Kuhn rotary disc cutter. ‘It's fast and although it cuts only a 64-ft. swath, I can cut as much hay in the same amount of time as I did before with a 9-ft. conventional cutter-conditioner,” Melvin’s also happy with his 1984 Ford 4610 tractor. “It's performed perfectly with no problems in over 800 hrs. I’ve only had to replace an O-ring that blew out in the hydraulic pump. I couldn't ask for anything better than this machine.”
Ford Ranger 4-WD off-road pickup
7 Best Buys1 Worst Buy“I bought our 2009 Ford Ranger 4-WD off-road pickup to get down our farm road in snowy winters. Using 4-WD in low range really does the trick. Too bad the company stopped making this pickup.”
“It’s going on 290,000 miles with no major repairs,” says Walker, pleased with his 2000 Ford Ranger 4-WD pickup equipped with a 4.0-liter gas engine.
“My 2008 Poulan 16-in. chainsaw is dif¿ cult to start, even after it has been running for a while. Also, the chain oiler clogs up.”
David’s impressed with his 1989 Ford Ranger 4-WD pickup equipped with a 2.3-liter, 4-cyl. engine. “I bought it new and have already put more than 265,000 miles on it, yet it still has the original starter, alternator and water pump. Only the clutch and air conditioner have been replaced.”
“My 1992 Ford Ranger 4-WD pickup is my best buy. It gets 22 mpg, and the 4-WD works great. This pickup drives and rides better than the 1992 Nissan pickup I previously owned.
“My Belarus 240A tractor is my worst buy. The power steering went bad and it shifted hard.”
A 2001 Ford Ranger 4-WD pickup equipped with a 4.0, V-6 liter engine rates as Lynn’s “best buy.” “This pickup is smaller than the company’s F-150 model, but it’s an incredible machine. The best part is that it gets 22 mpg. It has a nice cab and also rides well, and it does a good job in snow. This is the first Ranger I’ve ever owned and I love it. The only negative was the right front caliper. It ate up my right front rotor because a pin or two had frozen or got stuck inside the caliper. Repairs were made, and no problems since then.”
“I’m the second owner of a 1986 Ford Ranger 4-WD pickup with more than 297,000 miles on it. I’ve spent very little money on it, and it goes like a mountain goat. I’ve owned many Ford products and never had one that didn’t far exceed my expectations.”
“I like my 1997 Ford Ranger 4-WD pickup equipped with a 3-liter engine. No problems, just regular maintenance.
“My Stihl FS 56 gas string trimmer and Stihl 011 AVT chain saw are both best buys. They sit for long periods between use but always start right up.”
Ralph Hutto, Swansea, S.C.: Ralph's disappointed with his 1986 Ford Ranger 4WD pickup equipped with a 2.9-liter V-6 fucl-injected engine. He bought it with a 60,000 mile 4-year extended warranty. “Tt had dirty fuel injectors, a blown gasket, fuel pump in tank replaced, lifter replaced. At 20,000 miles all tires on the ground separated. At 28,000 miles the battery acted like it was dead so I purchased a new Scars DieHard battery with 675 cold starting amps. It works fine even though the alternator still doesn’t charge right.”
Ford F-350 Superduty pickup equipped
4 Best Buys3 Worst Buys“My 2018 Ford F-350 Superduty has been a disaster. I ordered it in January 2018 with a 6.2 liter gas engine and 4.30 gears. It arrived in May and that’s when the nightmare started. At 300 miles the truck seemed to be laboring to move and was getting 4.9 mph. The front wheel bearings and hubs were shot. At 1,000 miles it developed the beginnings of a death wobble in the steering and the truck would severely vibrate at 70 mph. I pulled the driveline off by myself and found out it was so out of balance it couldn’t be fixed. The transfer case went out the first time I tried the 4-WD at 3,800 miles. The final blow was that the aluminum body is too light so that the doors would not seal and shook inside the cab frame. In fact, they were so loose you could push your hand through to the outside above the window.
“I was fortunate that I got the dealer to buy this truck back at 4,000 miles. It looked great but was by far the worst vehicle I’ve ever owned.”
“This chainsaw is lightweight but packs a lot of power and is easy on fuel,” says Donald about his Echo CS-490.
“My Echo string trimmer is well balanced and will go for a long time on a tank of gas. It’s easy to rewind new string on the cutterhead.”
A 2003 Ford F-350 Super Duty pickup equipped with a 6-liter diesel engine rates as his “worst buy”. “It was in the shop more than my garage. Within the first 1,000 miles there were problems with the fuel pressure regulator, fuel injector, and fuel injector control module. As the result of a class action lawsuit I received $350. It was Ford’s worst nightmare since the Edsel. I wouldn’t drive another Ford if they gave me one.”
“It’s one of the best pickups I’ve ever owned,” says John about his 2006 Ford F-350 Super Duty model.
“My 2004 Deere Gator just keeps on going with no problems.
“My 2000 Husqvarna weed trimmer is still going strong.”
“My 2012 Ford F-350 Super Duty crew cab diesel pickup gets up to 26 mpg and has unbelievable power.
“I love my 2001 Goldoni diesel tractor equipped with a Deere engine (www.italianfarmmachinery.com). This Italian-made tractor is really built well and has never let me down.”
Myron’s had good luck with his 2000 Ford F-350 Superduty pickup equipped with a 7.3-liter diesel engine. He bought it used with about 26,000 miles. “I’ve worked this pickup hard, pulling a 26-ft. livestock trailer and also a 31-ft. flatbed that’s usually loaded to the max. It now has more than 256,000 miles on it while requiring only routine maintenance except for a cam sensor recall and a broken leaf spring. Too bad the engine will outlive the body.”
“My 2005 Ford F-350 Super Duty flatbed pickup is a pleasure to drive. It has plenty of power to haul a 24-ft. trailer load of cattle on hilly roads without shifting out of sixth gear. No problems. I’ve never owned anything but Fords and that probably won’t change.”
Neal’s “worst buy” is his 2005 Ford F-350 Super Duty 4-WD crew cab pickup equipped with a 6.0-liter Power Stroke engine. “At about 15,000 miles the fuel pump went out (not the injector pump). The company paid for the pump and labor but wouldn’t pay for the filter kit, even though there were brass filings in it. The filter kit retails for $70. The transmission had a recall for a bad snap ring deep inside, which was covered under warranty. The pickup now has about 23,000 miles on it, and now the limited slip differential isn’t working. Also, there’s a problem with the turbo variable vane and with the EGR.
“I’m currently waiting for a qualified mechanic to do the warranty work on it, as some Ford mechanics aren’t certified to work on 6.0-liter Power Stroke engines. I’ve been a Ford man for most of my life, but I’m disappointed. I don’t think it was adequately tested.
“This is a $45,000 pickup that gets only 8 1/2 to 11 mpg. It has never made the 16 mpg they said it would, even on the open road not towing anything. I traded off a 2001 F-250 Super Duty 4-WD crew cab with 102,000 miles, and its 7.3-liter Power Stroke engine was still getting 16 to 20 mpg.”
Ford Jubilee tractor
6 Best Buys1 Worst Buy“My 1953 Ford Jubilee is one great tractor. Ford built this tractor to last. All it’s needed is a water pump, generator, voltage regulator, tires and paint — not bad for a 73-year-old tractor. It just keeps going.
“At 82 years old, I drive a 1994 F-150 and a 2021 Mustang. My tractor, truck and car are built ‘Ford Tough.’”
“My best buy is a 1941 Ford 9N. It looked scary, and I put tons of money into it, but it was well worth it. It still runs like a champ.”
Steve didn’t have a positive experience with a 1953 Ford Jubilee. “I overpaid for a non-running tractor. I sent it to my retired farmer father-in-law, and then we found out the fire deck was warped, so we got another engine. Dad got that running, and the throttle stuck, throwing a rod through the block. So we went back and machined the original, and after paying more than double the quoted price, we got it in and running. We paid a guy to set the timing and such. A week later, we took it home only to find out it couldn’t drive up a hill.”
“In 1980 I bought a used 1967 Wheel Horse 857 garden tractor equipped with a 36-in. mower, and it still runs great. The blades and battery have been replaced, but otherwise this tractor has required only routine maintenance.
“I also bought a used 1953 Ford Jubilee tractor in 1980 that’s still going strong. I’ve replaced 2 water pumps and tires and batteries. These tractors just won’t quit.”
A 1953 Ford Jubilee tractor rates as Walter’s all-time “best buy”. “We still use this tractor every day. At first my dad used it with a root rake and bush hog to get rid of palmetto trees. He also used it to level countless loads of dirt, to pull engines, and to haul cars and logs.
“The tractor’s hour meter broke in 1977 so I don’t know how many hours it has now. The clutch and brake pedals have been used so many times that the edges on my work boots have worn down to a knife-sharp edge. Numerous times the tractor’s front end has come off the ground from popping the clutch.
“We converted the tractor to 12 volts, rebuilt the hydraulic system, and replaced the radiator, clutch, and front tires. It still has the original rear tires. Regular maintenance is the key to why it’s still running.”
“Two years ago I bought a worn-out 1954 Ford Jubilee tractor for $3,500. It came with 7 pieces of equipment in very good condition that were worth more than I paid for the whole works. I disassembled the entire tractor, rebuilding and restoring it at a cost of $1,600. It’s now a fine machine that gets a lot of use.
“Another best buy is my 1986 Chevy 1/2 ton pickup. I’ve owned it 21 years and it has 196,000 miles on it without any engine work. I have changed oil every 3,000 miles and the filter every 6,000 miles and it’s still going strong. Me and that truck are growing old together.”
“My 1953 Ford Jubilee is the most reliable tractor I’ve ever owned. I use it to mow, rake, doze, plow, disk, and harrow. This year I mounted Bombardier half-tracks on it, which makes the tractor work even better.”
John Weber, Anchor, Ill; John bought two new high traction Armstrong tractor ures for the rear wheels on his Ford Jubilee — ; tractor. “The tire carcasses were so flimsy that as the lugs ran over the ground, the flexing action broke the cords under several of the lugs and wore holes in the tube. I hadn't gone to the field with the tires, but Just used them in the yard a few days. The company gave me a bad time about exchanging them for turf tires.”
Ford Taurus car
3 Best Buys4 Worst Buys“In 2000 I bought a new Ford Taurus. I sold it to my daughter in 2010 when it had 100,000 miles on it. The car now has 220,000 miles on it and the engine and transmission have never been touched.”
“I’m the not-so-proud owner of a 1992 Ford Taurus. I’ve had a lot of problems with it, including several head gasket replacements, constant brake replacements, transmission problems, and numerous electrical system headaches. Sometimes the lights would work and sometimes they wouldn’t. Same for the radio. The power windows only worked sometimes, and the wipers would quit working at the worst times. The company could never solve these problems. I’ve since learned that I’m not the only one who has had problems with this model.”
“My all-time worst buy was my 1997 Lincoln Continental. In the three years I owned it, I had to take it back to the dealer for repairs at least 20 times. The worst problems were with the engine mis-firing and leaking oil, but there were also problems with the transmission, rear end, suspension system, computer, and interior trim. I traded the car after the warranty expired because I couldn’t afford to keep it any longer.
“My 1992 Ford Taurus was another worst buy. The head gasket blew out at about 40,000 miles, the transmission failed at 50,000 miles, and the entire air conditioning system had to be replaced three times. So much for the company’s motto ‘fix it once, fix it for life.’ It cost me about $1,000 every time I took the car in for repairs.
“My 1998 Cadillac Deville is my best buy. It hasn’t been back to the dealer even once for repairs. I did replace the battery after four years, but that’s normal maintenance. I love this car.”
Lorne’s impressed with his 1990 Deere 8960 4-WD tractor equipped with a Cummins diesel engine. It replaced a Deere 8850 4-WD model which was equipped with a V-8 engine. “I like the combination of Deere reliability and Cummins diesel power. I don’t have to worry about huge repair bills as might be expected with the V-8 engine.
“My worst buy is my 2000 Ford Taurus. After a factory recall to change the computer settings, the fuel efficiency went way down, from 35 mpg to 25 mpg. The company said they couldn’t do anything about it. Also, dust collected between the door seals and blew into the car every time the doors were opened.”
“We bought a Case-IH 12-row no-till planter equipped with an Orthman hydraulic drive and Rebounder seed furrow closing attachments on it. The Orthman hydraulic drive lets us change population rates on-the-go and results in a more uniform seed drop. The Rebounder seed furrow closing attachments (Schaeffert Mfg. Corp., Inc., Rt. 1, Box 157, Indianola, Neb. 69034 ph 800 382-2607) pass above the bottom of the seed trench without putting pressure on the seed. It results in a quicker and more uniform germination, especially on clay ground. They also work well to apply pop-up fertilizer.
“My Deere 9500 combine does a wonderful job and has been trouble-free.”
“My 1987 Ford Taurus car is my worst buy. The engine tended to vapor lock whenever the weather got warm. I fought this problem for years. Finally I traded it for a Chrysler model which has been trouble-free.”
Hershel Fisher, Bremen, Ind.: “My 1989 Ford Taurus handles great, is comfortable to drive, and gets good mileage.”
John Hass, Rock Rapids, Iowa: “My 1989 Ford Taurus rides and handles well, is fast, and has good fuel cconomy.”
Ford 150
5 Best Buys1 Worst BuyRoy Peters, Tower, Minn.: Roy's pleased with his 1986 Ford 150 pickup equipped with a 6-cyl. 300 cu. in, engine. “It has 176,000 miles on it and it’s Only needed a couple of minor repairs, It still doesn’t use a drop of oil.” On the “worst buy” side, Roy's dissatisfied with his Sears 10-in. flex drive table saw. “Tlike everything about the saw. However, as soon as the warranty expired, the flex cable twisted off, It cost me $87.97 for the cable and housing because Sears won't sell the cable separately. The cable alone »bably wouldn't have cost more than > § Anyone know who makes flexible cable”
Duane Beune, Dodge, Neb.: “My 1988 Ford 150 4-WD pickup is a best buy. It’s got a good 6-cyl., 300 cu. in. engine and an comfortable cab. It drives and handles well except for the fact that it should have a way to manually slow cold engine idle speed. It races too fast.” Raymond A. Schroeder, Washington, Mo.: Raymond’s “worst buy” is his Allis Chalmers 600 no-till corn planter. “I've had trouble keeping coulters at an even depth. One side digs in deep while the other side barely touches the ground half the ime. Also, the units are too close to the ground for easy transport around the farm.”
Meadow Grove, Neb.: “One day the steering wheel fell into my lap. With only a few miles on it the brakes kept locking up. | hit a bump and the entire front end went out of it and cost $2,500 to fix. At 13,000 miles the transmission went out. At night, while driving the lights kept going out. Finally, with only 36,000 miles on it, the frame started buckling behind the cab,” reports Stephen about his ‘‘worst buy" 1980 Ford 150 4-WD Super cab. He also likes his 1984 Deere 4450 with mechanical front-wheel drive. “It's very reliable. Have had absolutely no problems with it at all. | rea, like the power shift and the traction that it offers.” Joe B. Thomas, Bloomingdale, Inc.: His “best buys" are a 1986 Ford F250 4-WD pickup with a 460 gas engine and a 1982 Allis Chalmers 8010 tractor. “I use the truck for general farmwork, and I put a tri-axle gooseneck trailer behind it to haul grain and hogs. I've put 9,000 miles on it and it's been trouble-free. The tractor has 1,500 hrs. without a single problem."
William Moyer, Earlville, Il: “‘ have a 1985 Ford 150 with a 302 V-8 engine. I get 10 to 12 mpg.,’ says William, disappointed with the mileage. Allen L. Ludens, Sioux Falls, S. Dak.: ‘My Butler Farmstead II steel building is certainly the worst buy I've ever made. It’s leaked since it was new. Now, both the dealer and Butler will not do anything. I've had snow piled 1-ft. deep after it enters between the sidewall and the roof.”
Harold Eason, Howell, Mich.: “The automatic transmission has never worked right. In cold weather, inate have to drive 2 miles or more before it shifts into high, I took it back five times to get fixed but, apparently, the company guarantee doesn't mean much,” reports Harold, disappointed with his 1982 Ford 150, 6-cyl. pickup.
Robert Prior, Indian Head, Sask.; “After 50,000 miles I haven't even replaced a spark plug,"’ says Robert about his “best buy” 1980 Ford 150. “There have been some minor problems. The oil filter is hard to change and the accelerator linkage tends to freeze in cold, snowy weather, but I'm quite satisfied.”
Ford 8000 tractor
6 Best Buys0 Worst Buys“It’s a very powerful and dependable tractor,” says Keegan about his Ford 8000.
He isn’t happy with his 2020 Kubota RTV 900. “I bought it brand new. After 3 months, it lost all power. I went to the dealer five times. They were unable to fix the problem. The dealer and Kubota refused to stand behind their product-very disappointing.”
“Our 1965 Ford 8000 tractor has about 10,000 hrs. on it but has required only routine maintenance. We use it 4 or 5 days a week all year long to grind feed and bale straw. It’s an exceptional tractor with minimal electronics and a reliable engine.”
“Our 1971 Ford 8000 tractor, and two Ford 7000 Ford tractors made from 1973 to 1975, are all best buys. We still use them to make hay and to do other jobs.
“Our 1990 Bush Hog disc mower is our worst buy. The gearbox had to be repaired, and the sicklebar broke twice.”
“My best buy is a 1965 Massey Ferguson 300 combine that I bought used last year. This machine runs and threshes grain and soybeans as good as any new machine. We paid $600 for it.
“Our 1968 Ford 8000 tractor still runs like new. No problems. We paid $6,000 for it.”
Don Braber, Goshen, Ind.: Don nominates his Ford 8000 tractor as a “best buy”. “It has 7,500 hours and works great.” On the negative side, “I’ve had lots of problems with my Allis-Chalmers 200 tractor mainly due to a poor rear end, Also the tractor is built too light. 1 can see why they don't build Allis-Chalmers tractors anymore.”
Gordon Knutson, McKenzie, N. Dak.: “T bought my 1970 Ford 8000 tractor from my Dad, who bought itnew, It has approximately 7,000 hrs. on it. About all we've done to it, other than regular maintenance, was to replace a head gasket at about 2,500 hrs. The tractor gets good fuel economy and starts well in cold weather,”
Ford F-150 2-WD pickup
5 Best Buys1 Worst Buy“My 2005 Hyundai Elantra GL has more than 160,000 trouble-free miles on it. The ride is comfortable and it gets 34 mpg.
“My 2004 Ford F-150 2-WD pickup had numerous problems, and some of them should have been cause for factory recalls. I hated this pickup.”
James is the satisfied owner of a 2015 Ford F-150 2-WD pickup equipped with a 2.7-liter Ecoboost engine. “I use it to tow equipment to jobs and to haul loads of firewood back to my home. No problems. It has plenty of power and is fuel efficient, averaging 20.9 mpg.”
Edward’s the owner of a 2005 Hustler Super Z zero turn riding mower equipped with a 24 hp Honda engine. “The mower itself is well built with no problems. However, within the first 20 hours of use the engine had to be replaced because of an oil pressure problem. There was no charge. The next engine dropped a valve and the company replaced all parts, but the dealer charged $500 labor. The machine was out of warranty.
“The following year the engine’s other cylinder dropped a valve. Again the company replaced parts at no charge, but the dealer wanted another $500 for labor so my son and I did the work ourselves. Next, the starter went bad which cost another $150 to fix. We had more starting problems as well as problems with the engine, wiring and oil pressure.
“We finally traded it for a new mower equipped with a Kawasaki engine. It now has more than 400 hrs. on it with no problems. We later learned that many mowers equipped with 20 hp Honda engines have had similar problems.
“Our 1985 Ford F-150 2-WD pickup is a best buy. It’s equipped with a 300 cu. in., 6-cyl. engine and 4-speed transmission with overdrive. No problems.”
“I’d rather drive this pickup than my car,” says Robert about his Ford F-150 2-WD pickup equipped with a 5.4-liter engine and automatic transmission. “No problems after 50,000 miles. The 5.4-liter engine has more power than I need.”
“I like my 1989 Ford F-150 2-WD pickup equipped with a 300 cu. in. engine and 5-speed transmission. I bought it as a demonstrator model with 5,000 miles on it. Now it has about 148,000 miles and still works like it did when I first bought it. I’ve spent a total of less than $1,000 on it over the years, which comes out to less than $100 per year.”
Larry likes his 1995 Deere 7400 tractor and 1997Deere 7810 MFWD tractor. “Both tractors have convenient controls and good engines and 3-pt. hitch controls.” On the “worst buy” side, he lists his 1995 Ford F-150 2-WD pickup equipped with a 300 cu. in. 6-cyl. engine and 5-speed transmission. “We’ve owned many Ford pickups over the years and liked them. The problem with this one is that it has a new-design clutch slave cylinder - we’ve had to replace it twice in only 40,000 miles. Now it’s not working again but the company won’t do anything about it. They say the problem is due to our dusty conditions. It was a bad design change on a part that had worked well for many years.”
Ford F-150 XLT Lariat pickup
4 Best Buys2 Worst BuysI bought my 1987 Ford F-150 XLT Lariat pickup used 10 years ago, and now it has more than 220,000 miles. It has required only routine maintenance.”
“Amazing,” says Mike about the 1990 Ford F-150 XLT Lariat 4-WD pickup he bought used with 84,000 miles on it. “This truck can pull 14,000 lbs. with the factory bumper hitch, more than my previous F-250 could pull. I’ve had no problems other than regularly scheduled maintenance. It now has 137,000 miles on it after four years. I only wish the clutch wasn’t so expensive to put in. It costs about $750 installed.”
On the other hand, one of Mike’s “worst buys” is his 1995 Polaris 300 4-wheel ATV. “It hasn’t idled right since it was new. I took it back to the dealer and he told me it was a matter of idle adjustment. What a joke! Four trips back to the dealer for the same problem in six months. Finally, I took it to another dealer and he fixed it for $80. Something that regulates the fuel/air mixture kept failing. Now, the problem has started again but I don’t have $80 to throw out the window every time this happens. Polaris claims they make the best products, but I’ll never buy another one. Next time, I’ll buy a Yamaha or a Kawasaki Mule.”
A 1995 Ford F-150 XLT Lariat 4-WD pickup heads Ernest’s “best buy” list. “It looks good and is built with quality. It has a great paint job, drives good, and performs well for having a 302 cu. in. electronic fuel injected engine. It gets 14 to 16 mpg around home and 18 to 19 mpg on the highway. “My 1996 Deere 425 all-wheel-steer riding mower equipped with a 60-in. deck is the best mower I’ve ever owned. It gets around just as fast as a zero turn mower but rides much smoother.”
Walter’s impressed with his 1993 MacDon 7000 swather. “The company was eager to introduce it to our area so they offered us a good price. We’ve used it every year to cut 2,000 acres of heavy, irrigated hay without any problems besides normal wear and tear. It conditions hay quicker than other swathers that we’ve seen. “My 1990 Ford F-150 XLT Lariat pickup is my worst buy. The clutch slave cylinder wore out and unfortunately it wasn’t covered by the warranty. The rear anti-lock brakes were constantly in for repairs, and the alternator failed and cost $700 to replace. All of these problems happened within the first 30,000 miles. We were happy when our hired man totaled this lemon out so that we could buy a Chevrolet.”
Bobby Barker, Grafton, Ohio: “My 1990 Ford F-150 XLT Lariat pickup is a worst buy. I took it back to the dealer at least four times for work on the brakes and front wheels (they shimmicd). It also made a lot of noise on the road, but the dealer said nothing was wrong. One time he had it for seven days but did nothing to fix it. I had it checked by another shop which found shocks and frame were bent and all tires were cupped or worn out. A lawsuit is pending.”
Norman Frank, Oakville, Iowa: “My best buy is a 1990 Ford F-150 XLT Lariat 4-WD pickup. It drives and rides as good as acar. I like the automatic lockout hubs and all the extras that come with the Lariat package. However, the fuel economy isn’t as good as on my 1981 Ford pickup.”
Ford Fusion equipped
5 Best Buys1 Worst Buy“My best buy is a 2007 Ford Fusion. I bought it used with about 80,000 miles. I haven’t had to do any major repairs – just tires and oil changes. It now has 240,000 miles.
“My 1949 Farmall H just keeps on running.”
“We bought our 2010 Ford Fusion with 4-cyl. engine new in 2010. It has 240,000 miles on it but still looks good and runs like new. The interior is also in like-new condition. When we bought it we hoped we’d be able to put 300,000 miles on it and it looks like we might make it. It has no issues mechanically, is a pleasure to drive, gets great fuel mileage, and is very reliable. I’ve heard good reports from others with these cars.”
“We like our 2015 Ford Fusion equipped with a 2-liter turbocharged engine. This is our third Fusion. Recently our grandson’s vehicle was in the shop so we loaned him our car, and he liked it so much that when he got his vehicle back he traded it for a Fusion.”
“Being 84 years old and fully retired, my only need now is for reliable, comfortable transportation. My 2010 Ford Fusion fills the bill. It’s also very economical whether I’m going to town, on a long trip, or making a parts run. It pleasantly handles any job.”
“I’m well pleased with my 2010 Ford Fusion equipped with a 4-cyl. engine. It averaged 38 mpg on a recent trip and rides great. It has plenty of power.”
“No problems with our 2007 Ford Fusion car. It’s comfortable and fuel efficient.
“My 1969 Deere 4020 diesel tractor is a best buy. It was our main tractor for 30 years while we were farming 200 to 300 acres of row and field crops. It was always dependable and required minimal maintenance, and it was also fuel efficient.
“Many newer products aren’t built with the same quality as 25 to 30 years ago. I fix most everything myself, but it’s hard to find parts for these newer products. And when you do, they’re expensive.”
Ford 1220 tractor
5 Best Buys0 Worst Buys“My Ford 1220 tractor always starts in the winter. I use glow plugs and never have to plug it in. It always does what I want to do. It gets a lot of loader work and rolls lawns with a homemade 2,900-lb. roller. It blows snow and does some one-furrow plowing. I have a 5-ft. width loader bucket and a 5-ft. snowblower for it. The weight is balanced well for many jobs. The two-speed hydro is always good for the jobs at hand. I added LED lights that really help at night. The 4-WD is fantastic. My only complaint is that it could use a little more power.
“My most recent worst buy is my Craftsman utility knife. It has a retractable blade that always retracts. I have to hold the thumb down on the handle all the time to use it. It doesn’t stay in place. I thought Craftsman would be worthwhile, but I guess not. It has a lifetime warranty, which is easy for the company because it’ll sit on a shelf and not be used, so it should last a lifetime.”
“It has more than 2,000 hrs. on it with no problems,” reports Marvin about his 1996 Ford 1220 riding mower equipped with a 60-in. deck.
“A couple of issues back (Vol. 39, No. 2) Ronald Shook said he had problems with the rear tires on his MTD riding mower which kept going flat. I find that SLIME works well in such situations (www.slime.com). I’ve used it on everything from wheelbarrow wheels to the 16.9 by 24 tires on my Kubota tractor. It seals up thorn and nail holes as well as leaks at the bead.”
James is the proud owner of a 1998 Ford 1220 compact utility tractor equipped with a 3-cyl. diesel engine, which he bought used. “I bought this tractor about two months before a big ice storm hit last January. I put a 5-ft. grader blade behind it. Our road was completely closed off with tree limbs and ice. The tractor did an excellent job of clearing my road. This tractor is more powerful than I thought it would be.”
A Yerf Dog utility vehicle rates as his “worst buy”. “This utility vehicle is hard to start. It only has about 85 hours on it but already the complete rear axle assembly has been replaced. Also, the chain and sprocket assembly, carburetor, air filter, and fuel pump have also had to be replaced. I wouldn’t recommend this machine to anyone.”
Robert B. Sharp, Bashaw, Alberta: “Our 1988 Ford 1220 15 hp diesel garden tractoris our best buy. We use ilto move and operate our 8-in. dia., 50-ft. long grain auger because it’s so casy to maneuver. It has a lot more power than any of the gas tractors we used in the past. The 3-pt. hitch lets us use it on various makes of mowers, rototillers, and blades. “My Skil 2305 rechargeable screwdriver isa best buy, I'm getting so lazy that won't put in a screw or tighten a hose clamp without it. I’ve retired most of my screwdrivers to pry bar heaven.” Robert says his Australian-designed Computorspray is a “worst buy”. “It has some excellent features - ground-driven pump, manual fold booms, and a tank that’s designed for easy clean out. However, it’s poorly made and has broken in places due to design problems. To put it into transport position, I have to crawl underneath it and remove the drive chain. It’s nerve wracking because I never know if it’s going to finish a field before it quits working.”
Guy McDiffett, Alma, Kan.: Guy’s pleased with his 1991 Case-IH 7110, 1992 Ford 1220, and 1992 Case-IH 5140 tractors. All have front wheel assist. “I’m satisfied with all of them. They have handy controls and perform well. I haven’thad any problems with any of them. “My Better Bilt liquid manure tankismy worst buy. Basically, the machine works fine but when a valve broke on the back, the company didn’t have the part. After two months I still don’t have the part. They say it’s on a ship from Italy. They wouldn't consider taking a valve off their assembly line. “I’ve also had problems with my 1992 Westendorf TA 45 front-end loader. My main complaint is with the quick tach mounting system. It has handles that you pull up to unhook the bucket. However, dirt and gravel can getin where the rods work up and down. I have to use a bar to pry the rods up sol can get the bucketoff. Also, the main frame broke during the first year.” Clark E. Zipse, Freeport, Ill; Clark's had good luck with his 1984 Deere 430 diesel tractor. He uses it with a 60-in, wide mower and a 48-in. wide blade. “It has plenty of power for mowing and pushing snow on our hills. No problems.”
Ford 1/2-ton pickup equipped
5 Best Buys0 Worst BuysChris Shauer, Ottawa, Kan.: “Our best all-time pickup was a 1966 Ford 1/2-ton F-100 with 352 cu. in. V8 engine and club cab. My father purchased it in 1972 with 40,000 miles on it. He overhauled the engine at 100,000 miles after years of hauling up everything on the farm, We've gotten 23 years of service out of this pickup. It looks as great today as the day dad bought it. It’s now got 270,000 miles on it and I suspect it'll run many more before we retire it.”
Joe E. Chaffin, Elkhart, Texas: Joe likes his 1979 Ford 1/2-ton 4-WD, long wheel base pickup that he bought used with 60,000 miles. “I bought it to haul hay. It had been used on a Colorado dude ranch, and a kid from Louisiana brought it to Texas. He had mounted four new 5-in. gumbo mudder tires on it and sold it to me for $1,800. It looked like heck because the fenders were all bent up, but it had one of the best drive trains and engines I’ve ever seen in an old Ford pickup. I’ve had it for 5 years. I mounted a 3,500-Ib. winch at the rear that I use to pick up 1,500-Ib, round bales. I’ve moved a lot of bales with it, “Lalso use it for deer hunting and have crossed creeks and sloughs where you wouldn't believe a pickup could go. The only maintenance I’ve done has been to install new brakes and front shock “They don't make pickups like this one anymore.” absorbers. It has almost 100,000 miles on it but still doesn’t use any oil and will climb up a wall. They don’t make pickups like this one any more. My 1994 Ford pickup will never be as good as this one.”
Charles Huegel, Venus, Penn.: “It has good power, fucl efficiency, and brakes, but the radio is lousy and first and reverse gears go way too fast for a farm pickup,” says Charles, who is otherwise pleased with his 1989 Ford 1/2-ton pickup equipped with a 300 cu. in, 6-cyl, engine and 5-speed transmission.
Lewis Senter, Plainview, Tex.: “It's hard to understand why I like my 1986 Ford 1/2-ton,4-WD pickup as well as I do. Dealer service was good in most instances but the automatic overdrive transmission was a disaster from day one. It was 14 months, 28,000 miles and many times in the shop before it shifted right. It had computer problems, bad thermostat, bad switch on gas tanks, and a broken throttle cable, The U-joints in the drive shaft went out in one year and gas mileage wasn’t as good as I was told to expect. However, I like the ride and handling. Paint and trim seem perfect and interior is very good.” Lewis nominates his 1986 MasseyFerguson 3545 with mfwd, and three 292 Chevrolet irrigation engines, as “best buys”. This tractor is very dependable and the few small problems have been handled promptly by my local dealer. It’s very fuel efficient and extremely powerful for its horsepower rating. I'll easily pull with a 2 wheel drive of 20 or more hp. I've really been pleased with it in muddy conditions, especially at planting time when every day really counts. I wish I had three more. The irrigation engines are as powerful and fuel efficient as promised. They start casy, have 15 to 20% more power than a stock ara. f ‘orst Buys ge) 292, and use less fuel.”
Bernard Van Kooten, Long _Island, Kansas: "My best buy ever has to be my 1974 F-100 Ford 1/2-ton pickup. Equipped with a V-8 360 engine and automatic transmission, it now has over 268,000 miles. There's never been a wrench on the transmission or on the rear end and it still has the original spindle bolts and bushings. The front end has never had to be aligned or adjusted and the tires wear evenly."
Ford 250
3 Best Buys2 Worst BuysJim Zinne, Ryegate, Mont.: “We bought a new Oliver 2255 tractor in 1974 and it gave us trouble every day of the nine years we owned it. have a list of 30 service calls and endless things I fixed on it. My dealer was helpful, but the tractor should have been replaced. I’ve talked to other owners who had similar stories. “My best buy is my 1993 Ford 250 diesel pickup equipped with a 4:10 rear axle and S-speed transmission. It's given me 38.000 miles of trouble-free service. Our 1989 Case-IH 7140 tractor is also a best buy.”
Emmett Prestenbach, Houma, La.: His “worst buy” is his 1988 Ford 250 diesel pickup. “The dealer claimed it would get 20 mpg, but it’s really 5 mpg. The cab is so “The dealer claimed it would get 20 mpg, but it's really 5 mpg. The cab is so noisy you need ear plugs to ride in it.” a A er a noisy you need ear plugs to ride in it.”
Ivan Nisly, Independence, Ore.: “I haven't bought anything new lately but both my 1980 White 2-62 tractor and my 1979 Ford 250 pickup have been best buys. They've given us good, nearly trouble-free service.” M. Heitstuman, Uniontown, Wash. “IT nominate FARM SHOW as best buy because it tells us about new products far ahead of other publications, In your Vol. 10, No. 3 issue you featured the Winn-O-Bar invented by Cliff Usick (Winn-O-Bar, P.O. Box 39, Newdale, Manitoba ROJ 1JO Canada). “The grain in the tank was the cleanest I’ve ever seen.” This add-on unit for combines consists of 16-in. long steel fingers that mount in place of the vibrating shoe and finger bar on most combines. The idea behind this invention looked good to me so I ordered one and installed it on an “MH” Gleaner, which is the hillside special of the “M". The results are hard to believe. Cutting 70 bu. wheat at 5 mph there was no shoe loss, no grain in the return, and the grain in the tank was the cleanest I've ever seen. If every combine was fitted with a Winn-OBar our export buyers would not complain about the quality of our grain.” Philip M. Sprenkle, transport. Both heads had to be removed in order to remove the glow plug tips, which broke off and fell into the cylinders. “In April, 1985, a noise developed in the 4-speed manual transmission, | replaced the gear sync and. hub assembly but the noise reappeared when the transmission got hot. I changed to 80-140 fluid but that didn't help. I then pulled the transmission and installed new bushings. Still no improvement. In May of this year, | removed and replaced the transmission with a used 1974 4-speed manual transmission. | now havea nice, quiet running pickup.”
E.C. Modlin, Purdy, Mo.: ‘‘My worst buy is my 1983 Ford 250 diesel 4-WD. At 35,000 miles, the starter and flywheel were replaced while the truck was still under warranty. At 52,000 miles, another starter and flywheel were needed, but the truck was out of warranty. At 55,000 miles, a front wheel fell off. A new hub and spindle were needed to fix it. While the truck was in the garage they found that the diesel pump leaked. It was taken off and took 22 days to fix. Before the truck pump was worked on | got 14.7 mpg but now I get 10.5. I've already filled out two requests to meet with Ford representatives but no luck yet.”
Richard Alexander, Washington, Ohio: 'My best buy was a subscrip- tion to FARM SHOW. | look forward to each issue and then give it to my neighbor." Jerome Delvo, Langdon, N. Dak.: "Baling hay with my Vermeer 605G is a pleasure. It seems to work well with any type of hay. We baled 735 big bales of hay and straw without any problems or breakdowns." Arthur Harms, Pine Bluffs, Wyo.: Arthur nominates his Homelite 240 chainsaw as "best buy". "I cut a lot of wood with it last fall and didn't have any problems. Starts easy in any kind of weather." Fred Welch, Wallaceburg, Ont.: "It has lots of power, gets 25 mpg and starts well in cold weather," says Fred, pleased with his Ford 250 HD diesel pickup. "Another one of my best buys is my 2-85 White tractor. | bought it nine years ago and it's still in super work- ing condition."
Ford 4600 tractor
5 Best Buys0 Worst Buys“My Polaris vehicles (2023 Ranger NorthStar side-by-side, 4-WD and an older Ranger) always perform well. We use them for chores and fixing fence. All they’ve needed is regular maintenance.
“My Cub Cadet has been used in my garden as a mower and tiller since I bought it new in 1978.
“My 1983 Ford 4600 tractor has been used for many years. It always starts and runs great.
“On the negative side, my Lincoln battery grease gun worked for less than 6 mos. It quit pumping grease, and the 12-volt charger and battery also quit.”
Lorne nominates his 1977 Ford 4600 tractor as his all-time “best buy”. “For 29 years this model has been the main tractor on our 240 acres. It has more than 26,000 hours on it but the engine has never been taken apart. It still doesn’t use any oil, and it’s easy on fuel.”
Wesley likes his 1985 Ford 4600 tractor. “I use it to rototill gardens, some of which are in tight quarters. It handles great. I don’t like the tractor’s ignition lockout, and road speed is a bit slow. “ access to the carburetor. I also converted the tractor to 12 volts.”
“My best buy is a Ford 4600 tractor that I bought used in 1980 with 500 hours on it. Now it has over 6,000 hours and still starts and runs like new. We’ve had to make only minor repairs on it. I think Ford makes the best utility tractors on the market.”
William Douma, Beachburg, Ontario: William says his 1984 Belarus 611 tractor “Outperforms any tractor in its horsepower range. We use it to power an irrigation pump and it uses less than half as much fuel per hour as my old Ford 4600 tractor used. No major breakdowns or repairs.”
Ford 5610 tractor
5 Best Buys0 Worst Buys“I’m very pleased with my 1987 Ford 5610 tractor. Excellent hydraulics and a good, roomy cab with good heat and air. However, with the power that it has, it needs a little bigger cooling system. Works fine in ideal conditions, but we have problems if a little trash collects on the tractor when temps are 90° or higher.”
Scott’s 1995Agco Allis 6690 front wheel assist tractor equipped with a 780 front-end loader and grapple fork heads his “best buy” list. “It has a lot of power and the loader makes it easy to handle logs and round bales. The front wheel assist allows it to pull loads that would normally have to be pulled by a higher horsepower tractor. “My 1991 Ford 5610 tractor is a best buy. I use it every day. No problems.” On the “worst buy” side, he’s unhappy with his 1993 Big Valley loading chute. “The endgate is hard to operate if it’s slightly off-level, even with proper lubrication. Also, the paint on it has begun to flake and it’s showing rust.”
John B. Gund, Lee, N.H.: “It works good for haying and chores and generally performs well,” says John, whose 1989 Ford 5610 tractor has nevertheless had some problems. “The electrical system is faulty and the exhaust system is loud. Itgets tiresome if I don’t wear ear plugs.”
Robert Loveday, Stone Creek, Ohio: “It has excellent fuel economy and power and starts good in cold weather,” says Robert, pleased owner of a 1988 Ford 5610 tractor.
Charles Wylie, Proctorville, Ohio: “The best buy I’ve ever made is my 1986 Ford 5610 wactor equipped with front wheel assist. Ithasacomfortable, full size cab, and features that others offer as optional are standard equipment.”
Ford 8630 mechanical front wheel
5 Best Buys0 Worst BuysPaul W. Price, Goldston, N.C.: Paul's the satisfied owner of a 1993 Ford 8630 tractor. “It has plenty of power for the toughest lugging conditions, and the 18-speed powershift transmission lets me immediately shift into the proper gear with the flip of the shifter. Iteliminates the need to clutch except when starting or stopping. [t's never ata loss for power which lets ne keep movIng in tough conditions and speed up as soon as break out of those conditions.”
Ray Fiedler, St. Joseph, Minn.: Ray's impressed with his 1993 Ford 8630 2-WD tractor. “I really like the powershift transmission, foot throttle, and cab. It has doors on both sides. “My 1992 Case-IH 600 silage blower runs smooth and has a lot of capacity. use it with a 100 plus hp tractor.” On the negative side, Ray lists his Deere 1219 mower conditioner. “I bought it in the fall of 1992 when I traded in an 8-year-old New Holland 489 haybine and used it for the first time in 1993. didn’t like the way itcut - hay plugged up at the sickle guards.”
Robert Grishow, Rosendale, Mo.: “My 1992 Ford 8630 mechanical front wheel drive tractor equipped with a powershift transmission is my best buy. It has 126 hp but pulls equipment as well as the 140 hp tractor that I had been using. It uses four gallons of fuel per hour, shifts smoothly, rides comfortably, and is a real pleasure to operate. Itcost only half as much as green or red tractors.”
August E. Andersen, Long Eddy,N.Y.: “My 1971 Deere 4020 is the best tractor Deere ever made. “My worst buy is Onduline roofing installed on a 50 by 120-fi. barn. The paint came off after four years but the company said the coloring was not guaranteed. The rest of the roof fell apart within two more years. When I complained to the company, they sent me a complaint kit and I returned itto them with samples of the roofing. They said nothing was wrong with it. say that when you can see daylight through a roof, there's obviously a problem, We finally had to go through the state attorney general office to get.a settlement. I replaced it with a metal roof.” Bruce Eisenga, Marion, Mich,; A 1991 Ford 8630 tractor equipped with front wheel assist and power shift transmission rates as Bruce's “best buy”. “It's an excellent tractor. Has good power, is fuel efficient, and easy to drive. The power shifi transmission works great.”
Michael Limberg, Glenbeulah, Wis.: “It has good power and is easy to drive,” says Michael, owner of a “best buy” 1990 Ford 8630 tractor equipped with power shift transmission. “I like the shuttle shift and the ability to program whatever reverse gear you want to use. I also like how the transmission automatically shifts down whenever I come to a complete stop on the road so that when I take off again I don’t have to manually shift down.”
Ford Escort sedan
4 Best Buys1 Worst Buy“My 1997 Ford Escort sedan is my best buy. Over the years I’ve installed a new timing belt and a new spring for a total repair cost of about $80. It now has about 210,000 miles on it and still runs good.
“I bought my 2000 Deere 5205 tractor used with 227 hours on it. It’s equipped with a plastic gas tank which I can’t get to stop leaking. The gearshift levers are poorly located, so when I get off the tractor it’s possible to accidentally knock it in gear without even realizing it.”
“My 1998 Ford Escort wagon just keeps going and going. It gets 34 to 35 mpg and never has problems.
John says his “best buy” is his 1985 Ford Escort car which has more than 367,000 miles on it. “I work in construction as a heavy equipment operator. I drove this car 135 miles a day to work round trip for years. The engine has never been opened. All I’ve replaced are the water pump, alternator, and struts. I change the oil every 2,000 miles and it doesn’t use any oil between changes. If car manufacturers made all their cars this good they wouldn’t sell many new ones.”
“The two worst buys in my life are a pair of Ford Escort cars - 1991 and 1996 models. Both are equipped with 1.9-liter engines and automatic overdrive trnasmissions. The 1991 model has 85,000 miles on it and the 1996 model 91,000 miles. The main problem is with their transmissions. The transmissions on both cars received regular service and yet both went bad. A mechanic told me the transmission on these cars has an oil flow problem. I had to put in remanufactured transmissions which cost $2,100 each.
“My 1988 Ford Escort equipped with a 5-speed manual transmission was my best buy. When I sold it last year it had more than 300,000 miles on it and was still going strong.”
James is the owner of a 1991 Ford Escort station wagon. “It’s not a luxury car, but it provides good, economical transportation. It’s fuel efficient which I like because my wife drives it every day to work and we use it on long vacation trips. It has enough luggage space for a family with two teenagers. We’ve used it to haul up to 20 seed bags and also to haul machinery parts. It has over 100,000 miles on it but still doesn’t use much oil and starts right up even when it’s 15 degrees below zero. Its main weakness is that the door latches tend to break unless we oil them regularly.”
Ford Expedition equipped
4 Best Buys1 Worst Buy“I’ve been thinking about the best and worst vehicles I’ve owned over the years. My 1949 216-cu. in. column shift 3-speed transmission Chevy 2-door coupe was one of the best. It plowed some of the worst roads in Cheyenne County, Kan. I also played ‘ditch ‘em’ with it on the streets of Bird City, Kan. There were times it took a tank of gas to travel the 12 to 15 miles to school (depending on the route). A 1955 Cadillac, a 1974 Oldsmobile and a 2010 Ford Expedition have been the very best vehicles I’ve owned.
“On the worst buy side of things, I’d say my Dodge vehicles (a 1960 Dart and 1990 and 2010 pickups) were the worst.”
Robert’s 2003 Ford Expedition has been trouble-free. “I installed new brakes at about 170,000 miles. This vehicle now has about 176,000 miles but still runs like a watch.”
“My 1977 Stihl chainsaw still starts and runs great. I’ve replaced the bar and several chains, but it has required no other repairs.
“My 2006 Ford F-250 pickup equipped with a Power Stroke engine is my worst buy. It gets poor mileage, and the cooling fan roars at low temperatures. Also, so much mud builds up around the doors that I can’t get in or out without getting dirty.
“My 2006 Ford Expedition is a worst buy. By the time it had 23,000 miles I had already replaced all the tires. It rattles, and dirt around the rear door gasket causes leaks.”
“I like my 1998 4-WD Ford Expedition equipped with a 5.4-liter engine. It’s the best all-around vehicle I’ve ever owned. It can haul eight large 1,000-lb. bales with ease or pull our 28-ft. camper. It has a nice, comfortable ride for making day trips and plenty of room for passengers. At 204,000 miles it has had no major problems. It gets 15 1/2 to 17 1/2 mpg.”
“It’s one of the most comfortable vehicles we’ve ever owned,” says Wesley about his 1997 Ford Expedition equipped with a 4.6-liter, V-8 engine. “We bought it used with about 70,000 miles on it and have had no problems with it. It now has more than 140,000 miles. It gets 20 to 21 mpg. We’ve been using Ford pickups for 30 years and have had great service from all of them.”
Ford F-150 1/2-ton pickup
5 Best Buys0 Worst Buys“My 1968 Ford F-150 1/2-ton pickup still runs strong and doesn’t use any oil. It has more than 350,000 miles on it. The rings were replaced and the valves ground at about 120,000 miles.”
“Our 1989 Ford F-150 1/2-ton pickup is our best buy. Over the years we’ve put it through more than it was ever built for. It’s powered by a 300 cc straight six engine and has more than 250,000 miles on it. Those miles include a lot of hard farm work. This pickup has been overloaded and driven through rough fields at high speeds, yet it still rides great on the road. Despite all the abuse it has received, it looks pretty good.”
“My 1993 Ford F-150 1/2-ton pickup has about 282,000 miles on it and is a best buy. I had to grind the valves on the engine. Otherwise, it has required only normal maintenance to wear parts such as belts, brakes, and tires.”
Louis Klusinske, Wild Rose, Wis.: “My best buy of all time is my 1982 Ford F-150 1/2-ton pickup equipped with a 300 cu. in. 6-cylinder engine and automatic transmission, as well as overload springs and oversize tires. It has 75,000 miles and the only lime it’s been in the repair shop was for a new muffler, front end alignment, and for one new front wheel brake pad. I use it to haul hay all winter long. I can pile 68 to 73 bales on it with a total weight of 3,200 to 3,700 lbs,”
Doug White, Unity, Sask.: Doug doesn’t like computer-operated electronic fuel injection systems, particularly the one on his 1984 Ford F-150 1/2-ton pickup equipped with a 300 cu, in. 6-cylinder engine and 4speed transmission, “When I bought the pickup I didn’t know the engine was fuelinjected. Assoonas I gothome I phoned my dealer and asked if I could remove the catalytic converter so I could burn regular gas. He told me it would run rough butto go ahead anyway. It got about 22 mpg. The 1981 Ford F-100 model traded in had the same engine and got about 28 mpg. After about 40,000 miles the F-150 started to run rough. A Ford dealer told me to switch to unleaded gas which did. The pickup ran better, but gas mileage dropped to about 15 mpg. By 60,000 miles it ran worse again so I replaced the fuel pump. It worked better ( —— ~ PARAL CLIP « 47 Best & Wo: ( for a while, but by 72,000 miles it threatened to quit. I drove 100 miles to a dealer who replaced a computer module for $527 after a 10-day wait, Then they told me a stuck valve in the carburetor was causing the pickup torun too rich. They replaced the carburetor for $500. Meanwhile, I’m driving an old 1975 Chevrolet 1/2-ton pickup that bought used year ago for only $800. It's a much more reliable vehicle.”
Ford F-150 Lariat pickup equipped
5 Best Buys0 Worst BuysLeon owns a 2016 Ford F-150 Lariat pickup equipped with a 5.0-liter, V-8 engine and a towing package with 3.55 gears. “This pickup gets 17.6 mpg in town and 25.9 mpg on the highway. It rides and handles great and is a big improvement over the 2008 F-150 that it replaced.”
“My 2013 Ford F-150 Lariat pickup equipped with an EcoBoost engine works even better than I thought it would. I use it to pull a 32-ft. travel trailer. It performs great and has a wonderful ride.”
A 2000 Ford F-150 Lariat pickup rates as John’s “best buy”. “It’s reliable and fuel efficient, getting 22 mpg on the open road. We’ve had only one problem with it, and the dealer replaced the part under warranty. I didn’t know it even had a warranty because I bought this pickup used with about 36,000 miles on it. The repair was made at 67,000 miles.”
Paul Balascak, Westlock, Alberta: Paul's “best buy” is his 1991 Ford F-150 Lariat pickup. “I was always a Chevrolet man until my neighbors talked me into buying a Ford. It’s trouble-free and rides nice, It puts Chevrolet and GM products to shame. No more Chevrolets for me.”
David Billiar, Filer, Idaho: “It rides and handles very well and the 302 cu. in, V-8 engine gets 16 to 19 mpg,” reports David, pleased owner of a 1989 Ford F-150 Lariat pickup.
Ford Super Duty F-250 7.3l diesel truck
4 Best Buys1 Worst Buy“In 2003, I bought a Ford Super Duty F-250 7.3L diesel truck. It now has 226,000 miles, and the only problem, aside from normal wear and tear, was replacing the transmission at about 100,000 miles. At that time, the truck was used for heavy towing.”
“My 2015 Ford Super Duty F-250 has been an excellent pickup for 117,000 miles. I’ve had no costs other than for fuel and routine service. It pulls my 24-ft. gooseneck trailer with ease.”
“My 2005 Ford Super Duty F-250 pickup is my worst buy. I started having problems with the engine with only 5 miles on the pickup, and since then it has been back to the dealer 6 or 7 times. They said they replaced all the engine computers. Whatever they did, fuel efficiency dropped by 6 to 8 mpg and it still doesn’t run right.
“The problem is that when I’m pulling my 15,000-lb. camper and going up a long hill, the engine wants to race freely. The engine blower kicks in, and then after I top the hill the truck doesn’t want to slow down. Instead, it just wants to run faster and I have a hard time getting slowing it down.
“I told Ford that someone is going to get hurt or even killed because of this problem. Now my pickup is out of warranty and I’m out of luck.”
Roger’s impressed with his 2000 Deere 7510 MFWD tractor equipped with a 740 front-end loader. “The Power Quad transmission is very user friendly, especially for loader work. The engine is fuel efficient and the cab is very quiet.
“My 2001 Ford Super Duty F-250 4-WD pickup equipped with a Power Stroke diesel engine is a best buy. It’s fuel efficient and has excellent power.”
“I’m well satisified with my 1999 FordSuper Duty F-250 4-WD pickup equipped with a Power Stroke diesel engine and 6-speed transmission. It rides a little rough but of course it is a truck. The best mileage it gets is 15 mpg. I think Ford has the best looking pickup on the market. The diesel engine runs quiet and has a lot of power.”
Ford 2N 1954
4 Best Buys0 Worst Buys“Carl’s happy with his 1942 Ford 9N tractor, and a home-built tractor he calls his Baby N. “I painted it the same color as the 1950 8N that I grew up driving as a kid. I prefer the 8N color.
“To build the Baby N I bought an Awesome Henry V-8 Ford conversion kit and installed it on a Kubota tractor’s frame (ph 937 497-9447; www.awesomehenry.com). My Baby N has the 8N’s dash, running boards, and a flip-up seat. Last winter I added a 3-pt. hitch that’s operated by an electric linear actuator. I also built a bush hog, turning plow, and light disk cultivator for the Baby N.
“I also own a 1945 Ford 2N, 1954 Ford Jubilee, 1955 Ford 600 and 800, and 1975 Ford 2000.”
“I’m a retired mechanic and dairy farmer and the owner of Ford 2N and 8N tractors. I’ve never replaced the 10-spline clutch disc on either of these tractors. They were among Henry’s best creations! However, I bought a new Kubota 3130 tractor and, at 320 hrs., the 19-spline clutch disc center hub wore smooth with no wear on the facings. Kubota won’t stand behind their poor engineering and compensate for the repairs.”
“I bought my 1946 Ford 2N tractor used in 2001. The engine had some stuck valves, so I ground the valves and added some new parts and a new coat of paint. Now this tractor runs good and pulls a 5-ft. finishing mower with no problems. It’s a good, strong tractor.”
“My best buy is my 1947 Ford 2N tractor. It has served me well for 53 years and is still going strong.”
Ford 3/4-ton 4-WD pickup equipped
2 Best Buys2 Worst BuysPaul’s impressed with his 1996 GM extended cab, 3/4-ton longbed pickup equipped with a 454 cu. in. engine and automatic transmission. “It has about 150,000 miles on it but doesn’t show any rust or use any oil, and the interior is clean with no tears. I use this pickup to pull a tri-axle trailer loaded with either a skid loader or a tractor no problem.”
On the negative side, he lists his 2005 Ford 3/4-ton 4-WD pickup equipped with a 6-liter diesel engine and automatic transmission. “At about 75,000 miles the engine had to be repaired at a cost of $1,700. The rotors and calipers have been replaced twice, the brake and transmission lines had to be replaced because of rust, and the rocker panels and wheel wells also rusted out. The front seat had to be replaced because of ripped seams, and the pickup’s pollution control equipment needed major work.
“The second set of tires was almost worn out when I finally traded this $40,000 pickup for just $7,000. It was only the second Ford I’ve owned in 50 years. I wonder why?”
“My 1975 Deere 4430 tractor was a best buy. I sold it a year ago with 8,600 hours on it. It never used any oil. My Deere 4320 was an excellent tractor, too.
“My worst buy is my 1995 Chevrolet 1500 1/2-ton 2-WD pickup equipped with a 6.5-liter diesel engine. It gets about 18 mpg which is disappointing because I was told when I bought it that I could expect 25 to 30 mpg. Our 1995 Ford 3/4-ton 4-WD extended cab pickup equipped with a 7.3-liter Power Stroke diesel engine gets 16 to 20 mpg.”
Carl’s “best buy” ever is his 1965 Ford 3/4-ton 4-WD pickup equipped with a 6-cyl. engine. “The engine has never been overhauled even though the pickup now has 267,000 miles on it. It’s gone through three water pumps, two fuel pumps, plugs and points, tie rod ends, and one set of brakes. “MyHesston 6400 swather is also a best buy.”
Henry Schmeltehop, Holland, Ind.: "Our 1989 Ford 3/4-ton 4-WD pickup is our worst buy. It has less than 9,000 miles, most of them on hard surface roads, but already the rear brakes stick, I had it back to the dealer four times. The last time I had to wait for four hours, Finally the shop foreman checked it out but couldn't find anything wrong.”
Ford 5600 tractor equipped
4 Best Buys0 Worst BuysKevin’s generally satisfied with his 1980 Ford 5600 tractor equipped with a Ford 777 front-end loader. “We bought this tractor new in 1981 and have never babied it. It pulls like a mule and will come back for more. We’re pleased with how well it has stood the test of time. Our dealer has even offered to give us more money than we paid for it if we’d trade it in. On the down side, the clutch has been replaced a number of times and I burned two lobes on the camshaft. The engine was overhauled in 1993. Our biggest disappointment, though, has to be with the power steering box. A gasket on it has to be replaced once a year because of added stress caused by the loader work.”
“I like my 1976 Ford 5600 tractor which I bought used. I traded my Massey Ferguson 135 for it because the Massey was too light to carry round bales. The Ford model had water seeping through the head gasket, but the dealer repaired it before delivery. This tractor works great. It’s the best trade I ever made.”
“I like my 1976 Ford 5600 which I bought used. I traded my Massey Ferguson 135 in for it because the Massey was too light to handle round bales. The Ford model had water seeping through the head gasket, but the dealer repaired it before delivery. This tractor has performed great. It’s the best trade I ever made.”
Greg Vaughan, Stanbridge East, Que.: Greg nominates his Ford 5600 tractor as a "best buy". "I've had the tractor for 4 years and 3,000 hours. It hasn't needed any mechanical re- pairs whatsoever — just greasing, and oil and filter changes." ilizer Blade ts-Kind Thirty small holes feed fertilizer into the soil. The holes are notched into the blade at an angle to prevent soil from plugging them. Long says it takes a 6 psi pump to inject fertilizer without plugging and that you can use the same pump, application rates and travelling speed. Liquid Blade will be available next spring and will sell for $375. For more information, contact: FARM SHOW Followup, Davson, Inc., 33 S. Belmont, Springfield, Ohio 45505 (ph 513 322-1591).
Ford 7700 tractor equipped
4 Best Buys0 Worst Buys“My best buy is my 1980 Ford7700 tractor equipped with a cab and air conditioning. It has 7,300 hours with no problems. It uses very little oil and works great. I use it to make round bales. But then, my wife said that if she was going to continue helping me cut and rake hay she’d need a tractor with an air-conditioned cab. So we bought a Ford 7710 tractor equipped with a cab and air conditioning. It’s also a best buy. It has 2,300 hours with no problems.”
Steve Preusser, Jackson, Mo.: Heading his “best buy” list is a 1979 Ford 7700 2WD tractor. “It’s nearly maintenance-free and is easy to operate for both myself and inexperienced help. The cab is quiet with good visibility. Ford parts and service are excellent.” On the “worst buy” side, Steve's disappointed with his 1983 GMC diesel pickup. “The automatic overdrive transmission in this pickup is junk. I finally had to replace it with a regular auto transmission. The truck is low in power and lugging ability and the injector pump went bad at only 70,000 miles. Glow plugs keep burning out.”
Doug Allin, Atwood, Ontario: He’s happy with his 1982 Ford 7700 FWA tractor. “Front-wheel assist works great and this tractor gets very good fuel economy at 3 to 3.5 gal. per hour while plowing and cultivat ing. I now have 2,000 hrs. on it with no mechanical problems.”
Reuben Auch, Wishek, N. Dak.: “This tractor has a very poor hydraulic system at low rpm's to the point where you lose steering and all hydraulics. Clutch squeals and slips when taking off in the upper two gears. Shifts hard from forward to reverse. But on the positive side, it's the best starting tractor I’ve ever owned,” says Reuben about his 1983 Deere 2950 tractor with MFWD. His Roorda 6x16-ft. feed wagon built in Rock Valley, Iowa is “best buy”. “It's built to last. Has all grease type bearings and no expensive gear boxes. All-steel construction and reasonably priced.” Russell Braymen, Blanchard, Iowa: “| purchased my 1981 Ford 7700 tractor new. The only thing I've done other than normal service is replace the head gasket two years ago. Tractor’s big enough to do heavy work and is excellent for cultivating. It's an economical machine, quiet and roomy. “I also like my New Idea UniSystem. Economical, simple and easy to work on.” Paul Anderson, Mineral Point, Wis.; “Chunks of rubber the size of my thumb kept breaking off the crossbars. | thought my tire chains 1linate suys were causing it until I learned my brother-in-law had the same thing happen with the same tires without chains. I've had the tractor 3 years and have no tread left," says Paul, upset with Armstrong 18.4 by 38 tires on his Allis Chalmers tractor.
Ford 7740 tractor
4 Best Buys0 Worst Buys“My 1994 Ford 7740 tractor has about 11,500 hours on it, yet the engine has never been touched.”
Eric Angus, Kersey LDS Farms, La Salle, Colo.: Eric bought his “best buy” 1991 Ford 8830 front wheel assist tractor to replace a 1989 Deere 4455, “It’s had very few problems and the powershift transmission is the best on the market. It has a lot of power and a comfortable cab. It’s also fuel efficient. I liked it so well I also bought a 1992 Ford 8730 and a 1993 Ford 7740, Both tractors have front wheel assist.” Sam Scarlett, New Market, Tenn.: Sam nominates his 1992 Henke 2309 TMR mixer-wagon as his “best buy”. “I like it because we can mix more long hay with it, The wagon we had before could handle only about 2 Ibs. of hay per cow, but this one can handle 5 or more Ibs. “My Ford F-350 dually diesel pickup is my worst buy. The Firestone tires in front were “out of round’ and my dealer couldn't find out what was wrong. We took it to a private company that found the problem and fixed it. The dealer paid for it.”
R.D. Camper, Centralia, Ill..: “My 1993 Ford 7740 SL turbocharged diesel tractor is my best buy. The cab is the best on the market. It’s roomy and comfortable, has easy-to-use controls, and great visibility. The tractor has a short turning radius. “My Deere 2355 diesel tractor is my worst buy. Gears grind when shifting. Hydraulic outlets are difficult to reach, making it hard to hook up the hoses. The 3pt. control lever is poorly located. You'd have to have a 5-ft. long arm to reach it.”
David L. Millsap, Abingdon, Va.: David owns a 1993 Ford 7740 SL front wheel assist tractor and says it’s his “best buy”. “It has a lot of power for its size and is easy to handle. The cab has two large doors that make it easy to get in or out. It’s fuel efficient, has excellent lights, and rides comfortably. “My worst buy is forage harvester chains made by Shoup Mfg. The chains are connected by a Master Link equipped with ‘S’ hooks. Grass unbent the ‘S’ hook and allowed a chain to go into the cutting drum of our chopper. It did quite a bit of damage. A riveted link would eliminate this problem.”
Ford Crown Victoria 1996
4 Best Buys0 Worst BuysJim’s impressed with his 1997 Ford Crown Victoria. “What a fantastic car. I bought it used with about 69,000 miles on it and now it has about 417,000 miles. I drove this car 134 miles round trip every day for many years and never thought it would last this long. It still has the original drivetrain, and nothing on the car has been rebuilt.
“The vehicle’s 4.6-liter, V-8 engine averages 28 mpg, and my all-time best was 30.96 mpg on a long trip. The engine is a little tired now, but it ought to be and I may rebuild it. I think Ford made a mistake in discontinuing its Crown Victoria line.”
“I like my 1986 Ford Crown Victoria, 1996 Mercury Grand Marquis, and 2003 Mercury Grand Marquis. They’re all rear wheel drive. I regret that Ford is discontinuing these rear wheel drive models, because they’re easier to service.”
“My 2002 Ford Crown Victoria sedan is my best buy. It has about 40,000 miles on it with no problems.”
Martin Kenzie, Vermilion, Alberta: “It’s a decent looking car, one that I’m proud to be seen in,” says Martin, happy with his 1990 Ford Crown Victoria car. “Consistently gets 30 mpg, handles good, and has a nice quiet ride. However, I don’t like the bel! that rings when I open the door without removing the key. It’s annoying. “My worst buy is the Last Perch sparrow trap. It simply doesn’t catch sparrows. I’ve moved it around to different locations like the manufacturer suggests, but with no luck. There are plenty of sparrows around. I don’t know if they don’t fly into the trap, or if they’re able to getoutonce the perch drops.”
Ford Edge leaks dust
3 Best Buys1 Worst Buy“I like Bosch and Milwaukee cordless tools. You can’t beat the quality of these tools and batteries.
“My 2019 Ford Edge leaks dust so bad that it can be seen in the air when you drive down any gravel road. The dealers can’t or won’t fix it, and the factory representative wouldn’t do anything. We’ve owned many Fords, and still do, but this one’s disappointing.”
“We love how our 2019 Ford Edge rides, looks and handles, and also like the automatic dimming door locks and automatic wipers. “Our 2011 Ford Ranger handles great and is a nice size for hauling and towing jobs. We’ve driven Rangers since their introduction back in the 1980’s.”
“I’ve already put about 6,000 miles on my 2013 Ford Edge, and my only problem is figuring out how to use the many computerized gadgets on it. It has plenty of power and is reasonably fuel efficient. My wife likes it, too.
“The air-powered zip saw I bought from Harbor Freight quit working soon after I bought it. I bought another one but it quit working, too. I’ve generally had good results with Harbor Freight products, but this one is a loser.”
“This is the quietest and smoothest vehicle we’ve ever owned,” says Ernest about his 2011 Ford Edge. “It turns short, is fuel efficient, and easy to enter and exit. Also, the driver has a great view.”
Ford F-150 Super Crew pickup equipped
3 Best Buys1 Worst BuyErnest nominates his 2010 Ford F-150 Super Crew pickup equipped with a 5.4-liter engine as his “best buy”. “It rides great and has a lot of room. It’s also fuel efficient.
“My 2014 Kenmore refrigerator is my worst buy. The freezer compartment can’t even keep Eskimo Pies frozen, and the refrigerator compartment only cools part way. I’ve had a repairman out twice and these problems are now a little better, but it has taken 60 days to get to this point.”
“I’m really impressed with my 1989 PZ Zweegers CM 212 drum hay mower. I’ve used it to cut miles of roadside hay, to do custom work, and to cut our own hay fields as well. I’ve worn out 2 driveshafts, one set of skids, and countless blades. This mower has only been in the shop once, to replace an input gear behind the drive belt. Otherwise it just keeps on going. I’d buy another one in a heartbeat.”
On the “worst buy” side, he lists his 2002 Ford F-150 SuperCrew pickup equipped with a 4.6-liter, V-8 engine. “I bought this pickup used in 2003 with about 29,000 miles on it and changed the oil every 5,000 miles, but it just isn’t built as tough as the 1996 F-150 it replaced. It started running badly on a cold day last January while I was hauling hay. I replaced the idle air control valve, since this is a frequent problem with this pickup model, but it didn’t help. The pickup acted like it was on cruise control all the time, and I had to ride the brakes to slow down to 35 mph whenever I drove through town.
“The pickup threw some codes so I took it back to the shop. It didn’t pass smog inspection there so I told them to fix it. A smoke test showed an intake leak, but the shop told me they didn’t want to work on it because they couldn’t find a new manifold.
“Evidently, Ford has decided to quit supplying critical parts on pickups more than 10 years old, and no one else manufactures a smog-area legal manifold for this pickup - which we need because we live close to Houston. I finally had another shop replace the intake gaskets, and they found the lower plastic intake manifold wasn’t actually cracked so it didn’t have to be replaced. But the pickup still isn’t working right and they’ve pretty much given up on it.
“I’ve been through this same problem before with IH cotton pickers; the company decided to ‘freeze out’ its older machines by not supporting them with parts. So I junked my IH pickers as they died for lack of parts, and replaced them with Deere machines which have a good, steady parts supply. I wouldn’t even think of buying an IH cotton picker now, of any kind. I won’t do business with a company that doesn’t stand behind its products.”
Fred’s a fan of Honda ATV’s. “They can go thousands of miles with very little maintenance. I put more than 30,000 miles on one model and have put at least 10,000 miles on two others, and we use them in very rough ranching country. On the other hand, I wore out a Yamaha in only about 7,000 miles.”
On the “worst buy” side, “My 2002 Ford F-150 Super Crew pickup equipped with a 5.4-liter gas engine has more than 110,000 trouble-free miles. However, due to poor engineering it’s almost impossible to change some of the spark plugs. Some shops won’t even work on them. I don’t know why manufacturers don’t use a small diesel engine in their light duty pickups. My Ford F-250 pickup equipped with a Powerstroke engine has more than 170,000 miles on it but still has the original glow plugs, brakes, etc. It’s also very fuel efficient. No more gas engines for me.”
“My 2002 Ford F-150 Super Crew pickup is my best buy. I like the way it rides and handles.”
Ford F-150 XL twin turbo
2 Best Buys2 Worst Buys“My Deere X350R riding mower does an excellent job, is easy to operate and is better than older riding mowers.
“We continue to buy Milwaukee power tools. There’s none better than those and Stihl.
“My 2022 Ford F-150 XL twin turbo has been trouble-free. I really like to drive it.
“Fifty percent of all Chinese products are no good, even small items like nuts and bolts. What a shame for stores to stock them. They’re no bargain when you can’t use them or they cause extra work.”
Shane’s happy with his Kubota B2601 utility loader tractor. “It’s easy on fuel and starts right up even at 25 degrees below zero, as long as I plug the heater in for an hour or so. I really like the loader.
“My only complaint is the foldable ROPS is too tall. Also, the locations of the 3-pt. hydraulic lift lever and 4-WD lever should be reversed. I grew up with older tractors so the order they’re in now is unnatural to me.”
He’s disappointed with his 2016 Ford F-150 XL pickup equipped with a 3.5-liter engine. “This pickup has impressive towing ability and fuel efficiency, but too many bells and whistles. The ride is rougher than any of my ’80’s or ’90’s Fords. The automatic windows have a mind of their own, and there isn’t a switch to turn off the passenger air bag. As a result, I have to buckle the passenger seat belt whenever my big German Shepherd dog rides with me or else the air bag sensor will make a constant dinging sound as I’m driving. The CD player has too many functions, and the cloth seats get stained too easily. Even water will stain them.
“I removed all 3 air dams under the pickup because they were in the way to change the oil. However, their absence actually improved the pickup’s fuel efficiency. I’ve been a Ford man for 20 years but can’t wait to sell this pickup. Too many annoying problems.”
“My 2016 Ford F150 XL regular cab is a good truck. The 5.0 engine gives gas mileage in the low 20’s on the highway. The springs, with a load of firewood, hold up reasonably well. The stock mirrors give a good view for backing up. Many options can be ordered for this truck, but not the ones I would want – manual transmission, locking hubs, grease fitting for the ball joints, tie rod ends, U-joints, and a dipstick for the transmission. Perhaps such features are now too technical for the average person. Most people will be happy with this truck but I’m still attached to my beloved, simple 1976 F-250 4-WD Highboy. That truck is a street legal farm tractor.”
A 2003 Ford F-150 XL pickup, equipped with a V-6 engine and automatic transmission, rates as Joe’s “worst buy.” “The engine’s intake manifold leaks, and there’s a knocking sound in the pickup’s front end. Both front doors leak water onto the door sill and the rear window leaks, too. Also, the entire length of the tailgate is rusted. This pickup has only about 10,000 miles on it. The dealer can’t seem to fix any of the problems.”
Ford F-450 dump truck equipped
1 Best Buy3 Worst Buys“I’ve farmed for more than 60 years and have had more than 100 different trucks and tractors, but my 2006 Ford F-450 dump truck equipped with a 6-liter turbocharged diesel engine is my worst buy ever. The trouble started at 23,000 miles when the turbocharger went bad. It required 3 major repairs at a cost of more than $7,000. The truck now has about 72,000 miles and is in excellent condition, but I haven’t been able to sell it because of the engine’s poor reputation.”
“My 1986 Ford F-150 pickup is equipped with a rebuilt 302 cu. in. gas engine and is always dependable, no matter what the weather.
“My 1994 Kenworth semi truck equipped with a new Caterpillar 3406 diesel engine does all the work of new trucks that cost 5 times as much. I keep up with a good synthetic grease and oil maintenance program.”
On the negative side, he lists his 2007 Ford F-450 pickup equipped with a Power Stroke diesel engine. “The engine is always blowing a gasket and it’s impossible to reach. This is a very over-engineered vehicle. The next time I have a shop truck built for my fleet I’ll recommend a Dodge diesel.”
Dan likes his Hydrabed HB200 pickup-mounted bale bed (ph 785 284-3674; www.triple-c-inc.com). “We have a 300-head cow-calf operation and use the bale bed every day to feed cattle. At other times we use the extra hydraulic valve to operate dump trailers, fence winders, and so forth.
“My 2006 Ford F-450 pickup equipped with a 6.0-liter diesel engine and 5-speed transmission is my worst buy. This truck goes through fuel injectors every five months or so and has no power whatsoever. A few weeks after I bought it I got a survey form from Ford wanting to know how I liked this pickup. I filled out the form, listing the problems, but never heard back from the company. Finally I gave up on the Ford and bought a Dodge 4500 diesel pickup.”
Richard Warren, Miller, Mo.: “My 1992 Deere 9500 4-WD combine is a best buy. Last year was extremely wet which caused the combine to pull hard on our bottom gumbo soils, but the 235 hp engine had plenty of power to handle it. The cab is ajoy to work in and the combine doesa good job threshing and cleaning.” David J. Monteith, Birchrunville, Penn.: David nominates his 1993 Ford F450 super-duty dump truck equipped with a 7.3-liter diesel engine and 5-speed manual transmission as his “best buy”. “I own two other Ford diesel light trucks. I've used them hard but have had excellent luck with all of them. They don’t cost much to maintain. None of them has needed any repair work under warranty.” Travis D. Stanley, Mountain City, Tenn.; “I like my 1991 Zetor 5245 4-WD tractor. It cost only $16,000 compared to $25,000 for other tractor brands with comparable power. It had a few problems at first. A bearing went out and there were fuel line problems with less than 150 hours. Now it has 373 hours and is going strong.”
Ford Flex equipped
4 Best Buys0 Worst Buys“This car has exceeded all my expectations,” says Wayne about his 2010 Ford Flex equipped with an Ecoboost twin turbo V-6 engine. “It has a lot of power and can tow my 4,000-lb. trailer up long grades in fifth gear at 2,500 rpm’s while going 70 mph. A non-turbo would be at redline in third gear in the same situation.”
This June James bought a used 2012 Ford Flex car equipped with a 3.5-liter, V-6 engine. “It handles nice, rides great and has a lot of power. I paid $15,850 for it. It has about 58,000 miles on it.
“My 2003 Toyota Tacoma pickup has more than 115,000 miles on it but still looks and drives like new. I use it to pull our pop-up camper and 3,000-lb. boat and cargo trailer. I drive it every day.”
“Our 2009 Ford Flex was a great car but it got totaled when a pickup ran a stop sign. We replaced it with a 2012 Flex that’s equipped with the new energy-efficient EcoBoost engine, and it’s a fantastic vehicle. Great mileage and with 365 hp it goes pretty fast for a station wagon. It’s the most comfortable car we’ve ever owned.”
“My 2010 Ford Flex crossover is fuel efficient and has about 38,000 miles on it with no problems. I bought this vehicle because my wife wanted something that would haul grand kids and ‘stuff’ at the same time.”
Ford Ranger XLT pickup equipped
3 Best Buys1 Worst Buy“It has about 192,000 miles on it with few problems,” reports Gary about his 1999 Ford Ranger XLT pickup equipped with a 2.3-liter, 4-cyl. engine and 5-speed manual transmission. “It still runs and drives great. I’d buy another one in a heartbeat if the company still made them.”
“My 1996 Ford Ranger XLT pickup is my worst buy. I bought it used with about 82,000 miles on it. The owner told me he had no problems with this vehicle. But two days later the dome light wouldn’t go off, so I had to pull the fuse. Five days later the ‘check engine’ light came on and it cost $140 to fix. Nine days later the catalytic converter went out and that cost $250. Fourteen days later the windshield wipers went out. Nineteen days later, the heater and temperature control stripped and I couldn’t turn the heat down or turn the air conditioner on. I fixed the problem myself by running a throttle cable to the main control door, allowing me to regulate both heat and air conditioning.
“Twenty five days later the automatic transmission went out without warning. It cost $1,400 to take care of that problem. Now everything is working okay, but I’m just waiting for something else to happen. I think this pickup is possessed. I also think the guy I bought it from was real lucky to sell it when he did, or else he was psychic.”
“My best buy is my 1990 Ford Ranger XLT pickup equipped with a 6-cyl. engine. It has everything on it except power windows. With over 99,000 miles it still doesn’t use any oil. Rides and handles like a car.”
David Whisnant, Shelby, N.C.: A 1988 Ford Ranger XLT pickup is David's “best buy”. “The V-6 engine handles very well and gets good gas mileage.”
Ford vehicles
4 Best Buys0 Worst Buys“I love my Ford vehicles. I bought a new 2007 Fusion to drive to work. The mileage to work was 75 miles one way. I ran the car for 13 years and retired. At the end of that time, the car had 464,883 miles on the original engine, clutch and pressure plate. The only thing replaced on the engine was an alternator. It was damaged when it jumped out of gear.
“I also have a 2004 F-350 diesel SuperCab long bed 4x4 pickup, a 1996 F-250 4x4 pickup for the farm, and a 2024 Maverick pickup. My tractors are Ford and New Holland, as well. All four tractors have provided outstanding service without many mechanical issues.”
“Our family owns many Ford vehicles. It started with a 1986 250 diesel pickup with more than 250,000 miles on it. Then we bought a 1991 F-350 diesel pickup with more than 150,000 miles. No problems with either one. These pickups have really been put to the test. They have little to no highway miles and are usually loaded with two or three hay bales. We blower’s intake without plugging up. I’ve used it a lot, with no breakdowns.
“My worst buy was my 2003 Harbor using it to drill through some 3/8-in. iron when it started blowing pieces of white plastic out the vents. Then it flashed a big spark and shorted out, giving me a shock through the plastic handle. I had only used the drill a few times.”
“I have five Ford vehicles and all but one have more than 100,000 miles on them. The accumulated mileage on them is more than 766,000 miles. The oldest is our 1980 Ford F-150 4-WD pickup equipped with a straight 6-cylinder engine and 4-speed transmission. It has more than 130,000 miles on it. I use it for fencing and general repair work. I also have a 1996 F-250 4-WD pickup equipped with a 5.0-liter engine and 5-speed transmission. It has more than 78,000 miles on it. We use it to haul cattle and large loads.
“I have two Ford Escorts. The oldest is a 1992 model with more than 210,000 miles on it and it’s still running strong. My son drives it every day to work. My 1998 Escort has more than 148,000 miles on it. I drive it every day and average more than 38 mpg. My wife drives our 1993 4-WD Explorer every day. It’s equipped with a 4.0-liter engine and 5-speed transmission, and it just passed the 200,000 mile mark. Recently I’ve had to spend some money on repairs to the transmission. I also had to have the electronic 4 by 4 motor and the clutch and pressure plate replaced. It also needed other minor repairs.
“I do most of my own maintenance such as oil changes, tire rotation, and minor repairs. I use only Motorcraft oil and filters on all my vehicles.
“I have a Ford 1710 4-WD tractor equipped with a Westendorf T 110 front-end loader which I really like. This tractor has more than 650 hours on it. I use it every day on my farm to haul bales and wood, rake hay, plant crops, and cut brush. We use two other Ford tractors on our farm. Both are diesel powered and have more than 3,000 hours on them.”
Douglas likes his Drill Doctor drill bit sharpener. “It’s user friendly and works just like the company said it would.
“I like my Sears Craftsman garden tractor equipped with a 42-in. mower. The deck is nice and level, the automatic transmission works great, all the controls are within reach, and it steers easy. The Briggs & Stratton 19 1/2 hp Twin-Turbo gas engine is smooth and vibrates very little compared to a single cylinder engine. All these features are a definite plus to someone who has arthritis. It’s built a lot like a ‘real’ tractor.
“All my Ford vehicles have been best buys, including ten cars, six pickups, four grain trucks, two full-size conversion vans, an Explorer, a Windstar van, and three tractors. I’ve used other brands, but in the end I’ve been much more satisfied with the performance of Ford products. The only real problem is that when I want to buy a used Ford, it’s hard to find one for sale.”
Ford 1210 tractor
3 Best Buys0 Worst Buys
“My 2007 Kubota B7510 tractor equipped with a front-end loader and backhoe is my best buy,” says Raube McDaniel, Philippi, W.
Read the whole story →Wayne likes his Ford 1210 hydrostatic drive loader tractor. “It’s an excellent tractor. It’s just the right size to go to the woods to cut wood and can easily maneuver around trees. We put the sawed pieces of wood in the bucket and haul them to the trailer. This tractor is just the right size for a number of jobs on our farm.
“My International 633 4-WD tractor is my worst buy. We went to the woods to cut wood and on our return home we were driving at a slow speed when the transmission housing broke in half, causing the pinion gear shaft to break. It was an expensive repair.”
“My Ford 1210 tractor equipped with a front-end loader and backhoe is a best buy. I bought it used 10 years ago and it has saved me a lot of work. I use it around our yard to plant trees and do other small jobs. It still runs good and has a lot of power for its size. It’s also easy on fuel and small enough to get in tight places. I also use this tractor to do some work for my neighbors.
“My 1999 Ford F-150 4-WD pickup equipped with a 5.4-liter engine is my worst buy. At about 45,000 miles the right cylinder head gasket started leaking oil at the rear of the engine. I talked to six service managers at Ford dealers in northern Utah and southern Idaho and learned that this leakage is a common problem in the 4.6 and 5.4-liter engines. It’s caused by shoddy work in the manufacturing process. Metal chips left on the block or head aren’t cleaned off and when the head gasket is installed, the chips keep the gasket from sealing and in some cases damage the head. The oil leak is usually at the right rear, left front or both heads on the engine. How hard is it to clean the head and block before the engine is assembled? Ford hasn’t been able to do it in six years. I let my neighbor, a fan of Dodge, read Ford’s service bulletin 02-22-7 and his question is, if the chips are on the block and head why wouldn’t they be inside the engine also?
“Ford’s recommendation is to pull the engine before removing the heads so the heads won’t get damaged during removal from the engine. Two dealers I talked to won’t replace the gaskets unless new heads are installed. Labor, two new heads, the gaskets, recharging the air conditioner, etc., put the cost at about $3,000.
“When I called Ford and filed a complaint, I asked why they sent pickups out knowing they had defects in them. Their reply was that it doesn’t make any difference if the pickups leave the factory with defects because if they fail during the warranty (three years or 36,000 miles) they’ll fix it - after that it’s the owner’s problem. This is how Ford expects to reach their goal of 100 percent customer satisfaction. My position is if the truck leaves the factory with defects, Ford should fix it, under warranty or not under warranty.
“The people at Ford think they can send their pickups out with defects in them and after the owners get stuck with a huge repair bill they’ll buy another one of their junkers. Not me, I’ve been driving Ford trucks since May 1967 but I wouldn’t buy another one if they were having a two-for-one sale. Besides, if you pay $30,000 for a pickup and it can’t run more than 45,000 miles, why would you want another one?”
Ford 1520 tractor equipped
3 Best Buys0 Worst Buys“My 1989 Ford 1520 tractor equipped with a 3-cyl. diesel engine does a good job of handling my 5-ft. Bush Hog finishing mower. I use it to pick up and carry our 1991 Troy-Bilt Tomahawk chipper-shredder equipped with an 8 hp Briggs & Stratton engine. It’s a best buy, too.
“I use my 1997 MTD riding mower to pick up and grind leaves for compost. The material is blown into a home-built box that I mounted on a garden trailer. The box is open on front and has screen sides and a back door along with a tin roof.
“My 1991 Woodchuck wood stove works great (Meyer Mfg., Dorchester, Wis.).
“I haven’t had good luck with Poulan chainsaws, either electric or gas-powered.”
“Our best buy is a 1995 Ford 1520 compact tractor equipped with a diesel engine. It’s very nimble, built rugged and is a real pleasure to operate. The large displacement 3-cyl. diesel engine has low top end rpm’s and is quiet and fuel efficient. The hydrostatic transmission is operated by a toe-heel pedal and works as smooth as silk. It has L, M, and H ranges which make it easy to use.
“My Dad bought the tractor equipped with a front-end loader, 60-in. mid-mount mower, and 60-in. front-mount snowblower. I’ve made a few slight modifications/additions to the tractor. I added a microswitch on the 4-WD lever and an indicator lamp on the instrument panel that makes it easier to know if the 4-WD is engaged. I mounted an hour meter in the instrument panel and a microswitch on the mid-mount pto engagement lever. This allows me to keep track of hours on the mid-mount mower or snow-blower for their individual maintenance requirements.
“I added small wheels to both sides of the loader’s bumper so that as I back away from the loader during removal, the bumper doesn’t scrape on the cement floor. It makes removal or mounting of the loader much smoother.
“To attach the snowblower, the rear loader mounts and the mid-mount mower lift assembly originally had to be removed. I cut the top section off the snowblower side subframe mounts and notched them to make room for the gusset on the loader mount brackets, along with longer bolts. It’s now easier to attach the snowblower and I don’t have to reassemble the removed parts in the spring. The snowblower is so well built that my modification doesn’t compromise the tractor’s strength, performance, or safety. Also, the mower lift assembly and loader brackets don’t interfere with operation of the snow-blower.”
A 1994 Ford 1520 tractor rates as Tom’s “best buy”. “It has performed perfectly and has more power for its size than any other tractor I’ve ever seen. All we’ve done is change the oil and filter. “My 1997 Makita cordless drill is my worst buy. It’s poorly balanced, and the reversing switch is poorly located which makes it hard to use. Also, the circuit breaker that protects the motor kicks out too easy.”
Ford 1710 tractor
2 Best Buys1 Worst BuyMelvin says his Ford 1710 tractor is his “worst buy.” “I’ve had this tractor repaired six different times. The problem is that the hydraulic system leaks badly and runs completely dry in only about four hours. A Ford tractor mechanic says the company offers a kit to fix the problem, but he can’t find any and I can’t afford to buy another tractor. I’d like to hear from anyone who knows how to solve this problem. From what the mechanic told me, it’s a common fault with this model.”
“My 1987 Ford 1710 compact tractor is my best buy. It has never failed to start and keeps going all day long.”
Lloyd I. Leamon, Lafayette, Ind.: “My 8 and 12 piece punch and chisel sets from California Contractors Supplies, Inc., are no good. The center punches flattened the first time I used them and the chisels wouldn't cut anything but sheet metal. “My best buy is a 1985 Ford 1710 with FWD and a Dual 105 quick attach loader. Tractor starts easily and the synchro manual shuttle transmission works very well. Controls are easy to reach. We use the tractor to clean hog and cattle barns, mow fence rows and walnut trees with a 5 ft. rear-mount mower, and to haul hogs with a hydraulic hog trailer. Does everything we want economically.”
Ford 1720 compact tractor equipped
3 Best Buys0 Worst Buys“I recently bought an early 1990’s Ford 1720 compact tractor equipped with a Frey front-end loader. I use it with a snowblower and a 6-ft. finish mower. It starts right up in the coldest weather and has required only routine maintenance.”
L. Jerry Lee, Greensburg, Ind.: “My 1990 Ford 1720 rototiller is my best buy. It does everything I ask it to. “My 1992 Yardman 18 hpriding mower is a worst buy. I couldn’t keep it running long enough to even finish mowing my yard, The dealer couldn’ t find the problem.”
Don Kelly, Plato, Minn.: Don nominates his 1990 Ford 1720 tractor as “best buy”. “It has a comfortable ride, is economical, and picks upa 1,200-Ib. bale with no problem, Italso has a very handy loader. “My Winnebago motorhome is a worst buy. On quiet summer nights I can hear it falling apart out in the shed.”
Ford 6710 tractor
2 Best Buys1 Worst BuyOtis is disappointed with his 1985 Ford 6710 tractor. “I bought it new and have changed the oil regularly every 50 hours. At 2,638 hours, the crankshaft and three rods went bad, even though I had never worked the tractor hard. I sent a letter to the company but they never even acknowledged receiving it. However, I know they got it because in the letter I praised our local dealer who had put in a new engine in the tractor - at a cost to me of $7,000 - and a New Holland rep showed them my letter. Another problem is the front axle spindle is built too light. I’ve broken three spindles so far, and the last time one broke the tractor rolled over. It’s not easy to get out of a tractor cab when the tractor is lying on its side.
“I needed bearings for the tractor one Saturday but the dealer didn’t have any. He said I should go to a Napa auto parts store because they have the same bearings this tractor uses. Does it make sense for a tractor axle to use the same bearings as a car? Talk about cutting corners.”
Otis A. Ueckert, Bellville, Texas: Otis has had good luck with his New Holland 852 round baler. “I bought it used for about one fifth the price of a new 855 model. I’ve made 543 bales with it while spending less than $100 on repairs. “My 1985 Ford 6710 tractor is equipped witha 777F front-end loader. I paid $26,500 for the tractor. I like it fine except that the front wheel bearings failed. They were made by Toyota in Japan. The dealer didn’t have them in stock so I had to buy them at NAPA Auto parts. Think of it - installing car parts on a tractor equipped with a loader. When thebearings wentout again I ruined a spindle, I'm switching to Timkin bearings because they’re made in the U.S.A.”
Donald G. Chamberlain, Bowling Green, Mo.: He's happy with his 1983 Ford 6710 tractor. "This tractor replaced a 1980 6700 Ford. It has a little more horsepower but much better fuel economy. The hydraulic system is also much improved with increased capacity and redesigned valves. The pto clutch engages smoothly without jerking the implement. Hardly any bugs yet and a pleasure to operate."
Ford 8730
3 Best Buys0 Worst BuysDavid Proden, Ladysmith, Wis.: A 199] Ford 8730 tractor and a 1993 Deere discbine are two of David's best buys. “The tractor has a transmission that’s a dream to shift and the cab is comfortable and quiet. The discbine is a dandy. I can go as fast as I want, and the impellers dry hay just as good as rollers or better. “My worst buy was a New Holland Hydro haybine that I bought new in 1993 for $14,000. I used it to cut 130 acres of hay and couldn’ t keep it from plugging up. My dealer tried to fix it but couldn't. He called experts at New Holland who came out one day and told me the machine wouldn't cut my hay but couldn't figure out why, They were prepared to give me my money back, but apparently some of the company brass thought differently. had to keep after the company - one official even had me investigated for some reason - for nine weeks before I got my money. Then, I got only $13,500 back because, the company argued, I'd cut hay with the machine. That's the last piece of New Holland equipment I'll ever buy.”
Eric Angus, Kersey LDS Farms, La Salle, Colo.: Eric bought his “best buy” 1991 Ford 8830 front wheel assist tractor to replace a 1989 Deere 4455, “It’s had very few problems and the powershift transmission is the best on the market. It has a lot of power and a comfortable cab. It’s also fuel efficient. I liked it so well I also bought a 1992 Ford 8730 and a 1993 Ford 7740, Both tractors have front wheel assist.” Sam Scarlett, New Market, Tenn.: Sam nominates his 1992 Henke 2309 TMR mixer-wagon as his “best buy”. “I like it because we can mix more long hay with it, The wagon we had before could handle only about 2 Ibs. of hay per cow, but this one can handle 5 or more Ibs. “My Ford F-350 dually diesel pickup is my worst buy. The Firestone tires in front were “out of round’ and my dealer couldn't find out what was wrong. We took it to a private company that found the problem and fixed it. The dealer paid for it.”
Jeff Spence, Elizabeth City, N. C.: Jeff nominates his 1992 Ford 8730 front wheel assist tractor as his “best buy”. “The powershift transmission is one of the best on the market. It shifts smooth and is a joy to use. Front wheel assist is like having the tractor grow two sizes automatically.”
Ford F-150 XLT Supercab pickup
3 Best Buys0 Worst Buys“My 2016 Ford F-150 XLT Supercab pickup has about 28,000 miles on it and has been absolutely flawless. It’s equipped with a 3.5-liter Ecoboost engine that drives more like a diesel than a gas model, with torque available at all rpm’s. I can even go over 11,000-ft. mountain passes without ever having to shift out of overdrive. Fuel economy is outstanding for a pickup at 20.9 mpg overall.”
A 2000 Ford F-150 XLT Supercab 2-WD pickup equipped with a 5.4-liter engine rates as Jon’s “best buy”. “I’ve owned four Ford F-150’s during the past 20 years and they’ve all performed well. I put a lot of miles on my pickups, and this one already has about 38,000 miles on it. It does a good job pulling our 30-ft. travel trailer. It’s more stable pulling the trailer in crosswinds than a pickup equipped with twin I-beam suspension, but it rides a little rougher.”
Melvin Kampen, Plentywood, Mont.: Melvin is happy with his 1990 Ford F-150 XLT Supercab 4-WD short box pickup equipped with a 351 cu. in. fuel-injected engine, but says it could use a little more power. “I wish it had a 460 cu. in. engine so I could use it to tow my fifth wheel recreational vehicle and stock trailer. It rides nice and the automatic overdrive is nice for highway driving.”
Ford F-250 XLT 4-WD supercab pickup rides
2 Best Buys1 Worst BuyA 1990 Deere Gator AMT 622 utility vehicle rates as Calvin’s “best buy”. “I’m well pleased with it and haven’t had any problems at all. It’s by far the handiest machine I own and is a lot of fun to drive for checking fields and small hauling jobs. Saves a lot of wear and tear on my pickup. It’s equipped with an electric dump bed which makes it ideal for hauling dirt and rocks. I don’t know what I’d do without this vehicle.
“My 1997 Ford F-250 XLT 4-WD supercab pickup rides and handles like a car and is a best buy. I bought it used two years ago and haven’t had any problems with it at all. The 4.6-liter, V-89 has engine is easy on fuel, even though this pickup has an automatic transmission. I like being able to shift to 4-WD on-the-go. I also like the cab, which has plenty of room. I’ve always owned Ford pickups and this is the best one yet.”
Virgil has taken his “worst buy” 1999 Ford F-250 XLT 4-WD pickup back to the dealer an average of once a month since he bought it last September. “For one thing, I’ve replaced bad transmission sensors three times because the truck wouldn’t shift right.
“But the big problem is with the power steering oil cooler and the air conditioning unit. With the new, raised front bumper on the 1999 models, the power steering cooler unit is now located too low for off-road use. Even though there’s a rubber deflector that extends about 2 in. below the bumper, we break the unit or pull off the hoses every time we drive across corn stalks. I even had a neighbor tell me he had the same problem when he drove over a ridge of plowed snow last winter. Because the air conditioning unit is located directly behind the power steering cooler, it’s also very susceptible to bent fins when you drive across corn stalks. What these trucks really need is a steel deflector or skid plate under the front bumper, rather than the flimsy rubber deflector they’re equipped with. We called Ford several times about the problem, but they’ve never returned our calls.”
John Kuper, Broseley, Mo.: “It’s the best pickup I’ve ever owned but also the most expensive,” says John, owner of a 1990 Ford F-250 XLT 4-WD Lariat pickup equipped with a diesel engine and 5-speed transmission. “I use it to pull a 6-ton fertilizer buggy, as well as a 29-ft. fifth wheel travel trailer. It gets 18 mpg if 1 stay under 55 mph.”
Ford F-350 1-ton model
1 Best Buy2 Worst Buys“It’s the nicest handling pickup I’ve ever owned,” says Gary about his 2012 Ford F-350 1-ton model. “This pickup is an animal for power and can pull an 8 to 10-ton load on my 9,000-lb., 24-ft. gooseneck trailer. It also has a tight turning radius and a tough 6-speed transmission. I installed a 9-ft. 4-in. Eby aluminum dump bed on the chassis and love it (ph 800 292-4752; www.mheby.com).”
Mark’s disappointed with his 2004 Ford F-350 1-ton diesel pickup. “The turbocharger had to be replaced at about 13,000 miles and again at about 18,000 miles. Both repairs were covered under warranty. The turbochargers on this model are notorious for locking up. Now I have to decide whether to keep this pickup or trade it in once the warranty expires.”
“Our 1998 Twose 520 mower is our best buy. It’s a 3-pt. mounted over-the-guardrail mower. It’s built rugged and has a lot of good features like a belt-driven rotor. I recommend it highly for commercial roadside mowing.
“My worst buy in recent years is my 1992 Ford F-350 1-ton dump truck. After about 40,000 miles, the rear end completely disintegrated. We think the sending unit for the ABS braking system came loose from the housing inside which allowed small pieces of steel to get into the bearings. Also, the bolts that held the pinion in place were loose and fell out.”
Ford F-550 dump truck equipped
1 Best Buy2 Worst Buys“I’m well pleased with my 2011 Ford F-550 dump truck equipped with a 6.7-liter diesel engine. In cold weather, the diesel engine starts as well as any gas engine and it has exceptional power and torque. Also, the truck has a quiet and comfortable cab.
“My 2007 Kubota L5030 tractor equipped with a front-end loader worked good for about 3,500 hrs., before its hydrostatic transmission failed. The dealer took the transmission apart and found a flat steel ring about 6 in. in dia. had broken, causing pieces of metal to spread throughout the entire transmission. The total repair cost was $7,400. They claimed I had probably caused the problem by running the engine rpm’s too low.”
Brent’s disappointed with his 2003 Ford F-550 pickup equipped with a 6.0-liter diesel engine. “The engine goes down often and always costs $1,500 to $2,000 to fix even when the problems are minor. Now it needs a new automatic transmission, even though it has only about 100,000 miles on it. This pickup has been a $30,000 disappointment.”
“It’s probably the best pickup I’ve ever owned, but definitely has the worst engine,” says Troy about his 2006 Ford F-550 pickup. “It gets terrible mileage and lacks power. and now it has started leaking anti-freeze, probably into the engine. I took the pickup back while it was still under warranty, but they couldn’t find the leak. They checked the EGR cooler and compression. It also developed a high pressure oil leak so the fuel injectors wouldn’t fire. Next time I buy a pickup it’ll definitely be equipped with a Cummins diesel engine.”
Ford Focus hatchback
3 Best Buys0 Worst Buys“My 2007 Ford Focus presently has 264,000 miles on it. I change oil every 5,000 miles. So far, it doesn’t burn any oil at all or have any other problems.”
His 2007 Ford Focus hatchback has about 240,000 miles on it but still doesn’t use any oil. “I’ve never had a vehicle run so well for so long without requiring any major repairs,” he says.
Edward’s impressed with his 2010 Ford Focus equipped with a 5-speed manual transmission. “This car has about 170,000 miles on it but has never been in the shop. It has a lot of power and handles really well. The seats are really comfortable. It averages 40 mpg.”
Ford Focus 4-door sedan handles good
3 Best Buys0 Worst Buys“It’s the nicest riding car I’ve ever owned,” says Emil about his 2012 Ford Focus 4-door. “On a recent 400-mile trip this car got more than 40 mpg. I had the cruise control set at 70 mph all the way.
“Our 2008 Deere Z245 zero turn riding mower does a good job of cutting grass and is comfortable to operate. It’s an excellent machine in every way.”
“My 2003 Ford Focus 4-door sedan handles good and has more than 40,000 trouble-free miles on it. It’s fuel efficient.”
“My 2003 Ford Focus 4-door is an excellent car. It handles well, is fuel efficient, and has a lot of room inside considering how small it is. It’s the only car I’ve driven that I don’t hit my head every time I get in.”
Ford Golden Jubilee tractor
3 Best Buys0 Worst Buys“In 1975, I purchased a 1953 Ford Golden Jubilee tractor. I had a valve job done on it when I first got it. Since then, I’ve had no major mechanical issues. All my kids learned to drive and use it. I still use it almost daily.”
Cecil owns a 1954 Ford Golden Jubilee (also known as the Ford NAA). “This tractor may be old but it has performed great over the years in all respects. I changed the electrical system from 6 to 12 volts which makes the tractor easier to start.”
“The 2005 Ford F-250 4-WD pickup I bought used is my best buy. I use it as a farm/ranch vehicle, and my daughter uses it to go to horse shows, pulling a 4-horse trailer. Her tack alone weighs as much as two quarter horses. We’ve used this pickup to haul gravel, hay, and sawdust. It’s a good pulling pickup, loaded or empty.
“In 1980 I bought a used 1953 Ford Golden Jubilee tractor and have used it for pushing snow, leveling dirt, and baling hay ever since I replaced the tires and a clutch.”
Ford Major diesel pickup
2 Best Buys1 Worst Buy“My 1953 Ford Major diesel pickup with 4-speed has a hi-low range so there are really 8 speeds. It has excellent power for what it’s rated. In tough, heavy ground it digs in and pulls even more. It’s built compact so it’s easy to maneuver and shelter.”
“I’m well into my 80’s so I’ve had a lot of best buys over the past 60 years. My first new vehicle was a 1947 Studebaker pickup that looked much like the restored one shown in the photo. Over the years I owned several Studebaker pickups and put more than 200,000 miles on many of them.
“My 1947 Case VAC tractor has had a couple of valve jobs but has never been overhauled. I still use it a lot. My 1954 Ford Major diesel tractor from England has more than 20,000 hours on it and ran like new until a few weeks ago, when a crankshaft broke. My 1949 Chevrolet light duty pickup has more than 450,000 miles on it. My 1956
Calvin’s disappointed with his Century 220 AC or 140 DC welder. “Whenever I use it to weld at the rated duty cycle, the DC mode burns out diodes like they’re going out of style. I’ve had to replace three diodes. The AC mode has to be set at 180 amps in order to burn a 1/8-in. rod.
“I like my 1960 Ford Major tractor equipped with a diesel engine, which I bought used in 1967. It has more than 3,600 hours on it but I still don’t have to add oil between oil changes. It also starts easy. I use it to power my sawmill and to operate a rotary mower. I use a Long 3-pt. backhoe with it which is also trouble-free.”
Ronnie Kennedy, Goldman Equipment, chase that I could justify.”
Ford NAA tractor
2 Best Buys1 Worst Buy“My best buy was my 1954 Ford NAA tractor. I purchased it used from a local dealer in 1971 with a plow, disk, bush hog and grader. It came with the original manual and service papers. I used it every day from 1971 to 2009 with only one repair - in 1989 I had to replace the pto shaft coupler. In 2009 we retired it. My children later restored it and now take it to shows and parades.”
“Henry got it right 63 years ago with this 1954 Ford NAA tractor. It starts in any weather, is easy to work on with cheap parts, and is very rugged and built to last with high quality.
“My Jotel F3CB cast iron wood stove was built by the oldest stove company in the world, founded in Norway in 1853. It has heated our whole house for 8 years and still looks and performs like new. I paid a little more but it has been worth it.”
Eldon Williams, Dansville, Mich.: A 1986 Vermeer model LS 150A log splitter heads Eldon’s “best buy” list. “Ithas its own hydraulic system and 5 hp engine mounted ona trailer. It splits logs with the bar in the vertical position sol don’t have to lift blocks upon the bar, One person can easily operate it. “My Polaris Trail Boss 250 ATV is another best buy. I use it to check fence, herd cattle, spray fence rows and crops, and to haul a small trailer.” On the negative side, “The fuel pump on my 1988 White 37 tractor failed after about 10 hours. The dealer couldn’t locate the same fuel pump so he temporarily installed an electric fuel pump. This tractor has a higher horsepower rating than my 1953 Ford NAA, but it can’t do as much work, I traded it for the next larger size, model 43, but it didn’t work any better because couldn't keep it in gear. The dealer tried to repair the transmission, but was told that it had to be replaced. By this time White had introduced its American-made 60 and 80 models so I traded model 43 for model 60. However, after one hour of use a seal in the power take off failed and it started throwing oil. By now I was almost ready to give up, but the dealer and company replaced the seal and made other changes. The tractor now has about 175 hours with no more problems.”
Ford TW 15 tractor
3 Best Buys0 Worst BuysPaige Burnham, Aurora, Ore.: “Our 1990 Honda garden tiller is the best garden tiller we've ever used. It isn’t a rear tine tiller but it handles well. The model we had been using was a beast to run and didn’t have enough power. “Our 1991 MTD 12.5 hp 42-in. cut lawn mower is our worst buy. It has too many safety switches and poor lights, It doesn’t cut good and shifts real hard.” —i rst Buys US page) with this engine. I'm well pleased with it, It gets 25 to 30 mpg. The pickup is well built. “T’m also pleased with my Ford TW 15 tractor that I bought used in 1990, With regular maintenance and service it should last a long time.”
Freeman Wattam, Deseronto, Ontario: “One of my best buys ismy 1992 Chevrolet 1/2-ton 4-WD pickup equipped with a 6.2liter diesel engine. This is the second Chevrolet 1/2-ton pickup I've owned equipped “Ze. FPAras eure =o rst Buys US page) with this engine. I'm well pleased with it, It gets 25 to 30 mpg. The pickup is well built. “T’m also pleased with my Ford TW 15 tractor that I bought used in 1990, With regular maintenance and service it should last a long time.”
Lloyd H. Christ, Jr., Holley, N.Y.: Lloyd’s “best buy” is his 1988 Stan-Hay direct seeder. “I direct seed my cabbage seedbed and also direct seed in the field. This is the best precision planter I've ever used, It doesn’t waste any seeds.” On the minus side, “I had all kinds of problems with the cab and air conditioner on my 1986 Ford TW-15 4-WD wactor. traded it in on another 1988 TW 15 which works fine.”
Ford TW25 front wheel assist
3 Best Buys0 Worst BuysDavid J. Leiker, Hays, Kan.: David’s had good luck with his 1990 Vermeer 605J baler. “We owned a 605C model for 13 years before we updated to this model. It has made 8,000 bales with virtually no downtime. “Our 1991 Ford TW25 front wheel assist tractor is a best buy. It’s dependable, easy to operate, and comfortable. “Our 1992 Westendorf TA 46 loader is our worst buy. We couldn't use the loader without modifying the mounting brackets. Our dealer helped us every step of the way. However, when we called the factory we got the runaround. The first time we used it oil leaked all over the hood because the hoses weren’t tight. After using it one year, the bucket is bent up on the bottom due to frozen manure because it’s built too light. One plus is that it’s a snap to mount and dismount.”
Duane Riddle, Rochester, Ind.: Duane is pleased with his 36-ft. 8-ring Brock grain bin, purchased in 1986, as well as several accessories. “The bin is strong and easy to construct, The Caldwell 15 hp centrifugal fan is so quiet you can stand next to it and talk. The DMC Red Giant 4-auger stirrator is the simplest and most reliable on the market. The Hutchinson 8-in. in-bin unloading auger with commercial powersweep is powered by a motor outside the bin, so you don’t have to drag the sweep auger in and out of the bin every time you want to clean it out. It loads fast.” Duane is also generally satisfied with his Ford TW-25 tractor butsays itnevertheless has had problems. “It has good power, lugging ability and fucl economy, and the front wheel assist is well worth the money. However, the company has to get the muf“If Ford doesn't introduce its powershift, I'll soon be driving a new Magnum.” fler out of my face so I can see where I’m going. And it’s not geared properly for tillage work. There’s almost a 2 mph jump between third high and fourth low. If Ford doesn't introduce its powershift, I'll soon be driving anew Magnum.” Duane is also pleased with equipment mountedon his spray rig, including Knowles running gear with floating tandem, Raven 750 gal. elliptical tank, and a45-ft. air shock boom made by DeSchepper Farm Supply (Wyatt, Ind.). “The running gear is built heavy and the floating tandem removes many of the bumps. The elliptical tank keeps the center of gravity low, and Ican see over it from the tractor seat which is a real plus on the highway. Gallon markings help when refilling. But the best part is the boom air shock ride. It’s builtheavy and performs far better than expected.”
Bill Menzel, Holmdel, N.J.: “Our most satisfying purchase is a 1986 Ford TW-25 with mfwd. With 145 hp., it has all the power and comfort we could ask for. We now have 836 hrs. on it with no maintenance except for oil and filters. The tractor has a radar readout monitor, which is a must when you're putting down weed killer and working ground at the same time. Our next tractor will be another Ford."
Ford Windstar van
1 Best Buy2 Worst Buys“My Garmin GPS is a survivor of many trips over the past few years. It’s waterproof and has survived several drops. I have fun using it and it’s accurate to within a few feet. It works almost anywhere except in very tall, heavy trees.
“A 1995 Ford Windstar van is one of my worst buys ever. The vehicle’s warranty covered numerous repairs to the valve train, tie rods, power steering pump, electrical, doors, head gaskets and several other recalls, but we had to pay for two transmission rebuilds (one at about 30,000 miles and another at about 100,000 miles) and several front brake rebuilds, and we spent almost $2,000 over two years trying to solve a drivability problem with the engine. It was an expensive, frustrating vehicle to own.”
“My best buy is my FARM SHOW CD-Rom, which contains 28 years of FARM SHOW articles. In some ways, it’s also my worst buy since I’m now so busy building a number of projects that I read about that I no longer have spare time for fishing.
“My worst buy is my 1997 Ford Windstar. I was interested in your articles last year about problems with the Windstar. Mine also had a bad head gasket. I caught it quick with a radiator sealer. It now has 103,000 miles on it and I don’t want to spend any money on it. Do Ford engineers ever drive and work on their own vehicles?”
“I’ve owned four different vans over the years but this one is by far the best,” says H.J. about his 1996 Ford Windstar van. “It has more than 85,000 miles on it and still has the original brakes and Michelin tires. I changed the spark plugs for the first time at about 70,000 miles. It’s easy on fuel, runs quiet, and rides nice. I plan to buy another one.”
Ford trucks
3 Best Buys0 Worst Buys“My Milwaukee battery impact wrench has plenty of power, and the battery life is great. It makes changing tires or other tight bolts easy for an old man.”
Les is unimpressed with Ford trucks and the Bronco Sport. “They rust out fast. The new aluminum trucks are too light for good traction. They both have too many recalls, and Ford is too slow on fixing them.”
“In 1978 we bought a Vermeer 504C round baler. We used it for 11 years in all kinds of conditions and all we replaced were two bearings in the belt rollers and a couple of slip clutches. We had the belts re-laced twice and when it left our farm in 1989 it still had the original belts. We traded it in for a Vermeer 504I round baler which is also a best buy. Vermeer balers are simple to work on and parts are easy to get. “My two 1978 Ford trucks are both best buys. I think 1978 and 1979 Ford trucks were some of the best trucks Ford ever made. Both of mine still run great. I’d like to hear from other readers who own these trucks.”
Freddie Earnheart, Alamo, Tenn.: “All Chevrolet and GMC 6.2 and 6.5-liter diesel trucks have a bad cooling system. I’ve owned 1982, 1984, 1986, 1988, 1990, and 1992 pickups, and they all get hot in the field. The problem is that the radiator is too small, The radiator on Ford trucks has twice as much capacity.”
Ford 1710 4-WD loader tractor
2 Best Buys0 Worst Buys“My 1983 Ford 1710 4-WD loader tractor works great on our 23-acre farm. I bought a 48-in. King Kutter tiller and a Tractor Supply Co. post hole digger to go with it. I use the 12-in. post hole digger to punch holes 30 to 40 in. deep to plant trees.”
“I have five Ford vehicles and all but one have more than 100,000 miles on them. The accumulated mileage on them is more than 766,000 miles. The oldest is our 1980 Ford F-150 4-WD pickup equipped with a straight 6-cylinder engine and 4-speed transmission. It has more than 130,000 miles on it. I use it for fencing and general repair work. I also have a 1996 F-250 4-WD pickup equipped with a 5.0-liter engine and 5-speed transmission. It has more than 78,000 miles on it. We use it to haul cattle and large loads.
“I have two Ford Escorts. The oldest is a 1992 model with more than 210,000 miles on it and it’s still running strong. My son drives it every day to work. My 1998 Escort has more than 148,000 miles on it. I drive it every day and average more than 38 mpg. My wife drives our 1993 4-WD Explorer every day. It’s equipped with a 4.0-liter engine and 5-speed transmission, and it just passed the 200,000 mile mark. Recently I’ve had to spend some money on repairs to the transmission. I also had to have the electronic 4 by 4 motor and the clutch and pressure plate replaced. It also needed other minor repairs.
“I do most of my own maintenance such as oil changes, tire rotation, and minor repairs. I use only Motorcraft oil and filters on all my vehicles.
“I have a Ford 1710 4-WD tractor equipped with a Westendorf T 110 front-end loader which I really like. This tractor has more than 650 hours on it. I use it every day on my farm to haul bales and wood, rake hay, plant crops, and cut brush. We use two other Ford tractors on our farm. Both are diesel powered and have more than 3,000 hours on them.”
Ford 2600 tractor
2 Best Buys0 Worst Buys“My 1978 Ford 2600 tractor, which I bought used in 1991, is my best buy. I use it every week and have replaced only a starter motor. It has required only routine maintenance. This tractor always starts and operates without fail. I’ve used it for snow plowing, brush hogging, mowing, plowing and disking, rototilling, and landscape raking. It’s very fuel efficient.”
“My Ford 2600 loader tractor has more than 10,000 hours on it and is a best buy. Nothing
If you’ve got a hard-to-buy-for farmer or rancher on your
Christmas gift list this year, why not do your shopping right here?
Many readers who gave FARM SHOW for Christmas last year wrote to tell us they’ve never given a gift which generated so much response from appreciative recipients.
Your first gift subscription is $19.95 ($25.95 Canadian). Each additional gift is only $12.95 ($16.95 Canadian). If you like, you can give the “First Gift” to yourself as a one-year extension of your own FARM SHOW subscription, entitling you to give reduced rate gift subscriptions to friends, relatives, business associates, students, or others.
Use the handy order form inserted elsewhere in this issue to order your Christmas gift subscriptions, go to www.farmshow.com, or call us toll-free at 800 834-9665. has been done to the engine. It has gone through a couple of clutches, a rebuilt starter, and three water pumps.”
Ford 2610 tractor
2 Best Buys0 Worst Buys“Back in 1983 I bought a Ford 2610 tractor. I’ve used it with a Bush Hog 2346 front-end loader to load oak logs onto my portable bandsaw mill. I’ve also used the tractor with a Hesston 5530 hay baler. I’m well satisfied with this tractor.”
He’s had problems with his 1999 New Holland Boomer 250 diesel tractor. “The fuel injection pump started leaking, but the company won’t provide any parts or information on how to repair it. Their only solution is for me to buy a new pump at a cost of about $1,000. We’ve tried installing many different O-rings with some success, but the pump still leaks a small amount. I think parts for older New Holland machines are too expensive.”
Charles Beers, Dundee, Ore.: ‘For a 30 hp. tractor, it can’t be beat. It's very maneuverable with a field rake, in the barn with a loader and blade, and does a good job with a 1010 stack liner. The shuttle shift works great,” says Charles, pleased with his Yanmar 336D tractor. He’s disappointed with his Ford 2610 tractor. ‘‘It's limited in gear speeds. For mowing, rotovating, and so on, it needs a speed above and below the low range. The high range is okay for road travel but the low (Continued on next page) © _/. £FARM SHOW (1 13 Best And Wo (Continued from preceding page) range doesn't match up well with field work."
Ford 276 bi-directional tractor equipped
2 Best Buys0 Worst BuysGordon’s impressed with his 1991 Ford 276 Bi-Directional tractor equipped with a 2360 loader. “It made it possible to feed cattle in the two wettest springs and the worst winter on record. We couldn’t have handled the mud and snow with the equipment we had before. The four wheel drive, matched with a good balance of weight and power, makes it agile, maneuverable, and amazingly capable. Hydrostatic drive provides the operator with almost total control in any situation.”
Mike Lowry, Cairo, Neb.: Mike’ssalisfied with his Ford 276 tractor. “We put 500 hours a year onit. We use itfor windrowing and row crop and pasture spraying. We also mount a 3-pt. forklift on it for seed corn delivery.”
Ford 3600 tractor equipped
2 Best Buys0 Worst Buys“Our best buy is a 1975 Ford 3600 tractor equipped with a diesel engine. I bought it used in 1991 with about 700 hours on it. We use it for custom garden plowing, tilling, Bush Hogging, and chores on our small farm. No major problems. It now has more than 2,300 hours on it.”
Richard Roth, Scott City, Mo.: “My 1976 Ford 3600 diesel tractor is my best buy. I replaced the water pump last yearand that’s been the only major repair.” D.J. Armstrong,
Ford 39-30 tractor
2 Best Buys0 Worst Buys“My Ford 39-30 tractor is my best buy. It replaced a Ford 1900 model, which was a good tractor but was underpowered. The 39-30 has more power.
“My Water Hog pond pump is my worst buy. The problem is that the pump shuts down after running for only about 20 minutes, and I have to keep turning it back on all the time.”
“I’m well pleased with my 1990 Chevrolet Silverado 2-WD extended cab 1/2-ton pickup. It has more than 218,000 miles on it and has had fewer problems than any vehicle I’ve ever owned. It’s equipped with a 5.7-liter engine that consistently gets 18 mpg. It handles and drives as well as my 1997 model.
“My 1991 Ford 3930 is basically a good tractor but nevertheless could use a few improvements. It has only about 1,800 hours on it but I’ve already had to replace the front wheel bearings and steering bushings twice. I also had to repair the 3-pt. lift mechanism. The company should increase the size of the front wheel bearings on this tractor and also improve the lift mechanism.”
Ford 500 Limited all-wheel-drive car
2 Best Buys0 Worst Buys“My 2005 Ford 500 Limited all-wheel-drive car has all I could ask for. Its 4-WD system has much better control than the 4-WD found in trucks and has been trouble-free.”
Albert’s pleased with his 2005 Ford 500 Limited all-wheel-drive 4-door sedan. “This car is roomy. My wife and I are large people but we’re still comfortable in it. The all-wheel-drive adds stability when driving on wet or icy roads. No problems. It gets 22 1/2 mpg and has plenty of power. Also, it drives really nice.”
On the negative side, he lists his 2004 New Holland LS 190 skidsteer loader. “This machine has less than 400 hours on it, but already I’ve had the fuel-injected pump rebuilt three times. Also, two hose ends blew off the hydraulic lines with the lift arms in the raised position.”
Ford 5900 tractor
1 Best Buy1 Worst Buy“I own a 1990 Ford 5900 tractor and have had it since it was new. It was built when Ford tractors were Ford-built, not Ford-New Holland-Fiat. I’ve used this tractor for the last 32 years in the field doing hay (shredding, raking, and cutting). It’s served me well as it’s a well-built machine.”
Darrell hasn’t had such a positive experience with his Ford-New Holland TL90A that he bought new in 2008. “The A/C and power steering quit on Day 1. The alternator failed in the first year. The onboard computer shut the tractor down, saying there was no oil in the 4-WD gearbox, but the tractor was 2-WD, not 4-WD. This machine has been a disappointment.”
“My Land Pride 72-in. rotary mower does an excellent job on short or tall weeds and on grass. However, it could be built a little heavier.” On the negative side, he lists a 1988 Ford 5900 tractor purchased by his father. “At 1,100 hours the radiator cracked on top. Poor wiring caused the lights to go on and off intermittently. At 1,265 hours the fuel injector pump developed an internal leak which cost $400 to repair. Fifty hours later it’s leaking again. The tractor is well designed and it runs and handles well. However, it has had too many small problems.”
Ford 601 tractor
2 Best Buys0 Worst Buys“In 1955, my dad bought a Ford 601 tractor, which I’ve owned since 1980. This tractor was overhauled in 1973 and has required only routine maintenance since then. I use the tractor regularly with a bush hog and a grader blade, and also to do other chores. It’s still going strong.”
“I like my 2007 Ford F-150 XLT pickup equipped with a 4.6-liter, V-8 engine. It has a lot of leg room, hauls like a truck, and drives like a big Cadillac. It gets at least 20 mpg. My wife drives a 2007 Mercury Grand Marquis but we always travel together in the F-150.
“My 1980 Ford F-100 pickup still runs great. I installed a Ford F-350 4-speed transmission in it.
“My worst buy is my Kubota MX5100 tractor equipped with a front-end loader. For the pto to turn at 540 rpm’s the engine has to turn at 2,700 rpm’s, which is way too fast. The drive train is noisy in all gears, as if they’re not meshing right. I brought the tractor back to the company but they said nothing is wrong. The tractor only has 11 hours on it.
“I own a Massey Ferguson 150, Ford 601, and two Farmall Cubs and haven’t had any problems with them.”
Ford 6600 tractor
2 Best Buys0 Worst Buys“My Dolmar 510 chainsaw starts good, cuts fast, and is easy on fuel. My Ford 6600 tractor has plenty of power and is comfortable and easy to drive. It’s also fuel efficient.”
On the minus side, he lists his Kuhn Knight 1219 rear discharge box manure spreader. “The first year the poly floor cracked and the spreading paddles fell off. The following year, the small drive belt burned up 3 different times. I replaced it with a sprocket and chain which solved the problem. The third year we were scraping manure off the spreader when big patches of rust fell off the machine, leaving big holes. The company said this was just a cheap spreader anyway, but to me $9,000 isn’t cheap.”
Earl’s happy with his 1975 Ford 6600 tractor. “We bought it equipped with an 8-split transmission with dual power which results in a total of 16 speeds. It’s an excellent tractor. It has about 7,000 hours on it and has required only minor repairs. We haven’t had to do anything to the drive train, engine, transmission, or hydraulics.
“Our 1982 Case 2290 tractor is neither a best nor a worst buy. We bought it new in 1982, but before it had even 3,000 hours it needed major transmission and rear end repairs. The park gear had some broken gears, and the crown gear and pinion gear had to be repaired. The total repair cost was $10,500. Since then it has been a good tractor.”
Ford 6610 tractor isa worst
1 Best Buy1 Worst BuyDean Bozell, Xenia, Ohio: Dean says his 1985 Ford 6610 tractor isa “worst buy”. “Not only does it lack power, but the cab is hard to get in and out of. The gas pedal has to be held down or it won't stay atone speed. The air conditioner leaks water inside the cab and the seat is uncomfortable. The stationary arms on the seat make it hard to turn around when I want to look back.”
David Gloss, Clare, Mich.: David is pleased with his 1990 Ford 6610 tractor equipped with a deluxe cab. “It runs perfect and is easy to operate because of the handyto-use controls. “My Vicon 330 rake fluffs hay so it dries aday quicker. It really helped in a wet year like 1990.”
Ford 6640 tractor
1 Best Buy1 Worst Buy“Over the years I’ve owned three Husqvarna chain saws and one Husqvarna weed eater. They all start easy and have had few problems.
“My 1995 Ford 6640 tractor is my worst buy. The problem is that it uses a lot of oil. The dealer did a ring job on the engine but that didn’t help at all. Then he installed a new engine, but unfortunately it used as much oil as the old one. If we worked the engine hard it would use about a quart of oil every day. A local mechanic told me to use Shell Rotella oil in the engine. I did, and after three oil changes it doesn’t use oil any more.”
“My 1994 Ford 6640 tractor equipped with a powershift transmission is the handiest tractor I’ve ever used for doing small jobs like spreading fertilizer and cultivating. Mine doesn’t have a cab. The steering wheel tilts up so I can stand while driving fast on a fairly rough field and push a button to shift whenever I turn.”
Ford 6700 tractor
2 Best Buys0 Worst BuysWilliam’s happy with his 1981 Ford 6700 tractor. “It just sips fuel compared to our other tractor. It has about 6,500 hours on it and is a pleasure to operate.
“My 1980 Ford F-150 XLT pickup has about 185,000 miles on it but still runs good and doesn’t use any oil.
“My 1984 Honda 200 4-wheel ATV is a best buy. We use it to spray, seed crops, and check and feed our cattle. This machine is easy on fuel.”
“My son has a Snap-On wire welder which is a worst buy. He can’t get parts for it and the dealer is no help. It will be the last Snap-On tool on this farm.”
Paul Nutting, Archie, Mo.: Paul is pleased with his Ford 6700 tractor. “Service instructions on maintenance of the injector pump on the 6700 model vs. the 7700 model were in conflict. After pointing this out to a district manager, Ford replaced my injector pump, a$1,100 value, atno charge.”
Ford 7000 tractor equipped
2 Best Buys0 Worst BuysA 1972 Ford 7000 tractor equipped with a diesel engine rates as Joe’s “best buy”. “I bought it in 1973 as a demonstrator model with a little more than 400 hours on it. Today it has about 13,700 hours. I’ve replaced a fuel pump, clutch, head gasket, and four sets of tires. The rest of the tractor is just as it came from the factory, including the fuel injector pump and the injectors.”
“I bought a used Ford 7000 loader tractor that had a new paint job and looked sharp. However, it didn’t have enough hydraulic pressure for the loader to pick up round bales properly. I discovered that the problem was due to a pressure relief nut that had been backed off a turn and a half. Tightening the nut solved the problem. Now the loader works good.”
Ford 8700 tractor
2 Best Buys0 Worst Buys“My 1978 Ford 8700 and 1971 David Brown 990 diesel tractors are both best buys. The Ford has more than 12,500 hrs. on it but just keeps on going. The David Brown is super efficient and handy to use.”
Richard Haynes, Murfreesboro, Tenn.: Richard nominates his Ford 8700 tractor as a “best buy”. “It’s fuel efficient and the weight is evenly distributed so I don’t have . to load down the rear wheels with add-on weights. I used Westendorf quick attach brackets to mount a Deere 146 front-end loader on it. I simply pull up 2 levers, drop the brackets down, and back out. It takes longer to get on and off the tractor than it does to change from bucket to bale spear.”
Ford 9030 bi-directional tractor
2 Best Buys0 Worst Buys“I’m well pleased with my 1994 Ford 9030 Bi-Directional tractor. I use it to do everything from cutting hay to hauling manure and also to feed livestock during winter.
“My 1994 Belarus 825 tractor was a real lemon. I put only about 100 hours on it, and it was broke down most of the time. One time some wires burned off under the dash so it wouldn’t start. Later, a fuel injector went bad and an air conditioning hose blew. There were also numerous other problems. I finally traded it off.
”My reconditioned Makita 14.4-volt 3/8-in. cordless drill is a really handy tool for doing everything from household repairs to driving screws on a tin roof. It has a lot of power, and the battery runs a long time on a single charge.”
A 1995 Ford 9030 bi-directional tractor equipped with a front-end loader heads Robert’s “best buy” list. “It has a 3-pt. hitch, pto, and hydraulic outlets at both ends. It works great equipped with a snowblower on the engine end and a loader on the cab end. The loader is one of the strongest on the market. It has been a dependable tractor. I really like the hydrostatic transmission. “My 1997 Dodge 3500 1-ton 4-WD dually pickup equipped with a Cummins diesel engine is a best buy. It has only about 6,000 miles on it, but already I like its power and fuel efficiency - 20 mpg. “I have a full line of New Holland hay equipment - a 114 Hydraswing windrower, 320 baler, and 1069 bale wagon. When they were new they had some problems which were caused by poor workmanship at the factory. However, the dealer took care of the problems and they all work fine now.”
Ford 9600 tractor
2 Best Buys0 Worst Buys“In 1978 I bought a used 1954 Allis Chalmers WD45 tractor with a stuck engine. I replaced the valves and rings and added a live belt-driven hydraulic pump, power steering, and New Idea front-end loader. I still use this tractor almost every day. I replaced the rear tires with 18.4 by 26 tires with fluid, so it really pulls good.
“We also own a 1976 Ford 9600 tractor with no cab and a 1978 Allis Chalmers 7020 with cab that we bought about 18 years ago. Very few problems with either tractor. These tractors don’t use oil and start right up every time.
“Over the years I worked for several different companies where I drove newer model pickups including Ford, Chevrolet and Dodge. However, they all seemed to have minor but irritating problems so now I always buy used models, primarily Fords. I drove a 1978 Ford F-150 4-WD until it had about 396,800 miles, and now I’m driving a 1999 4-WD Ford that has more than 197,000 miles on it but still runs good.”
“I like my 1976 Ford 9600 tractor. I’ve spent very little money on repairs.
“My Belarus 1025 tractor has been nothing but trouble since day one.”
Ford 9700 tractor
2 Best Buys0 Worst Buys“It’s dependable and reasonably fuel efficient for its age,” says Ronald, pleased with his 1977 Ford 9700 tractor. “Any problems we had have been taken care of in later models.”
He added a set of moveable magnetic rear safety lights for towing wagons. He also built a set of double break-away mirrors for use when he tows his 400-bushel Killbros grain cart. He built a two-arm frame out of 1 1/2-in. sq. tubing and fitted it with commercial round rear views. The frame, which bolts on the top of the cab, adjusts out to the full width of the grain cart with tension springs.
John’s generally satisfied with his 1977 Ford 9700 but still has a few complaints. “I think the dealer is over-pricing parts,” he says. “We had to put in a new clutch and the dealer’s price was almost twice as much as I got it for elsewhere. The manufacturer should make it easier to get at some parts, such as the pto live shaft.”
Ford Crown Victoria LX car
2 Best Buys0 Worst Buys“I like my 2001 Ford Crown Victoria LX. I purchased it in Tacoma, Wash., and drove it home fully loaded with a cargo of books and clothes. It averaged 28.63 mpg at 68 mph, which I think is pretty good. It has a 4.6-liter engine with a single exhaust and a 2.73 ratio rear end. It’s a shame the company stopped making this car.”
Richard Schoen, Downs, Kan.; A 1993 Ford Crown Victoria LX car rates as Richard's “best buy”. “It had a loose wire in the ignition when we took delivery of it and died before we left town, The dealer immediately sent us home in his owncar and fixed the problem. Ever since then it has operated like a dream.”
Ford Edge SEL all-wheel-drive
0 Best Buys2 Worst Buys“It has amazing power and a battery that lasts a long time between charges,” says Jerome about his Milwaukee 2767-20 M18 cordless 1/2-in. impact wrench. “It has as much power as many corded models. Milwaukee also makes a great cordless cartridge tube grease gun. We use ours almost every day on the farm.”
On the negative side, “My 2016 Ford Edge SEL all-wheel-drive SUV had a great ride and was super fuel efficient, making it the perfect work car for my wife. All was good until mice started getting inside the vehicle. We traded for a 2018 Edge but soon mice got into it, too. Both SUVs were kept in a new country home with an attached garage. A cousin also had a mouse problem with his Edge.”
“It has amazing power and a battery that lasts a long time between charges,” says Jerome about his Milwaukee 2767-20 M18 cordless 1/2-in. impact wrench. “It has as much power as many corded models. Milwaukee also makes a great cordless cartridge tube grease gun. We use ours almost every day on the farm.”
On the negative side, “My 2016 Ford Edge SEL all-wheel-drive SUV had a great ride and was super fuel efficient, making it the perfect work car for my wife. All was well until mice started getting inside the vehicle. We traded for a 2018 Edge but soon mice got into it, too. Both SUVs were kept in a new country home with an attached garage. A cousin also had a mouse problem with his Edge. I found one Edge owner who lived in the country but had no mice problems. However, he also had about 20 cats living in his garage.”
Ford Escape SUV equipped
1 Best Buy1 Worst Buy“My Deere 5310 and 4720 loader tractors never fail to do the job and always start right up. They work great for doing everything from cleaning snow off driveways to mowing hay, pulling a Deere round baler, and feeding bales to livestock. The 4720 is just the right size for performing smaller jobs around the farm yard.”
On the “worst buy” side, he lists his 2012 Ford Escape SUV equipped with a 6-liter engine and 6-speed automatic transmission. “It does a terrible job of shifting gears whenever the temperature is between 35 and 55 degrees. It slips between third and fourth gear and then ‘slam shifts’ between fourth and fifth gear. I’ve been back to the dealer several times and also called the company. They claim they’ll fix the problem but it hasn’t happened yet. They did increase the shift point rpm’s of the engine, but all that did was lower the fuel efficiency.”
“I want to warn your readers about the 2001 Ford Escape SUV equipped with a V-6 engine. We really liked ours for the first 48 miles that we drove it, and then we started having problems. We’d be driving along and the vehicle would just stop running. No lights, no power brakes, no power steering - nothing at all. But then it would start back up.
“I took the vehicle back to the dealer and they called a Ford technician in to work on it. The technician called us and said the vehicle was ready to go. However, after I picked it up the same problem started happening again. The company’s technicians had this vehicle more often than I did. My dad ran a copy of the Iowa lemon law off the internet and we then sent a registered letter to the company, stating that we no longer wanted this vehicle because it was unsafe to drive. After about one month someone from the company called and in so many words informed me that the problem was all due to my imagination, even though they had tried to fix the vehicle eight different times. We ended up hiring a lawyer, and went six months without having a vehicle to drive.
“After all was said and done, our replacement vehicle ended up costing us $5,000.”
Ford Escorts
2 Best Buys0 Worst Buys“I own three 1995 Ford Escorts and they’re all best buys. My wife bought one of them new, and I bought the other two used within the past year. They have 170,000 to 195,000 miles on them and average about 38 mpg. The Escort is a small car but it can comfortably seat four people. None of my cars has required any engine or transmission work, and all of them always start even in the coldest weather.
“One of the cars is a station wagon, which my daughter and I use to deliver about 400 newspapers every weekend. We also use the station wagon to go fishing, hauling a canoe on top of it.
“These cars are reliable, fuel efficient, and fun to drive. They look good and never seem to age. It’s easy to get parts for them, and they’re reasonably priced.”
“I have five Ford vehicles and all but one have more than 100,000 miles on them. The accumulated mileage on them is more than 766,000 miles. The oldest is our 1980 Ford F-150 4-WD pickup equipped with a straight 6-cylinder engine and 4-speed transmission. It has more than 130,000 miles on it. I use it for fencing and general repair work. I also have a 1996 F-250 4-WD pickup equipped with a 5.0-liter engine and 5-speed transmission. It has more than 78,000 miles on it. We use it to haul cattle and large loads.
“I have two Ford Escorts. The oldest is a 1992 model with more than 210,000 miles on it and it’s still running strong. My son drives it every day to work. My 1998 Escort has more than 148,000 miles on it. I drive it every day and average more than 38 mpg. My wife drives our 1993 4-WD Explorer every day. It’s equipped with a 4.0-liter engine and 5-speed transmission, and it just passed the 200,000 mile mark. Recently I’ve had to spend some money on repairs to the transmission. I also had to have the electronic 4 by 4 motor and the clutch and pressure plate replaced. It also needed other minor repairs.
“I do most of my own maintenance such as oil changes, tire rotation, and minor repairs. I use only Motorcraft oil and filters on all my vehicles.
“I have a Ford 1710 4-WD tractor equipped with a Westendorf T 110 front-end loader which I really like. This tractor has more than 650 hours on it. I use it every day on my farm to haul bales and wood, rake hay, plant crops, and cut brush. We use two other Ford tractors on our farm. Both are diesel powered and have more than 3,000 hours on them.”
Ford Explorer XLT
0 Best Buys2 Worst Buys“The original transmission on our 2002 Ford Explorer XLT was replaced at the company’s expense. However, afterward we had to pay to have two more transmissions put in. Then last September at about 167,000 miles the fourth transmission failed, resulting in an average of only 41,750 miles per transmission. Instead of paying for another transmission I decided to buy a used Jeep.”
“It has a quiet cab and gets almost 24 mpg,” reports Norman about his 1996 Dodge SLE 1/2-ton 2-WD extended cab pickup. “It handles well on gravel and rough roads. No problems. “I’m also well pleased with the Honda 13 hp engine I bought two years ago. It’s very quiet, always starts, and has a lot of power.” On the “worst buy” side, he lists his 1993 Ford Explorer XLT. “It gets only 22 mpg on the highway. The wheel bearings went out at 70,000 miles and the starter went out at 50,000 miles. The muffler rusted out at 55,000 miles.”
Ford F-150 4-WD XLT equipped
2 Best Buys0 Worst Buys“I bought it new in 1997 and am happier every day with my purchase,” says Kody about his “best buy” Ford F-150 4-WD XLT equipped with extended cab and short box. “The 5.4-liter Triton engine has plenty of power for farm work. It has no trouble pulling loaded trailers, although the springs are too light for really heavy loads. I’ve put over 53,000 miles on it in two years and it’s required nothing more than routine maintenance. This pickup has been nothing but a pleasure to drive, whether in the field or on the freeway. I call it the Cadillac of Workhorses.”
Mickey Leid, Dayton, Wash.: “My 1989 Ford F-1504-WD XLT pickup rides, drives, and handles like a dream. drive 800 miles per month on gravel and dirt roads so use 4-WD or low range nearly every day.” Mickey's says his 1990 Cobra Plus-20 CB radio is “absolutely worthless. It slips back to channel 9 every time I blink my eyes. The dial nob is too small and the push buttons are ridiculous. I’m going to throw it away and buy another brand.”
Ford F-150 King Ranch 4-wd
2 Best Buys0 Worst Buys“I drove my 2008 Dodge Ram Big Horn 2500 pickup about 115,000 miles in 3 years, but it had a lot of problems. Something new seemed to go wrong almost every day whether it was with the turbocharger, check engine light, transmission, upholstery, headlights, air conditioner, or exhaust filter.
“The check engine light came on 5 min. after I drove away from the dealer showroom, and the dealer’s inept technicians never were able to figure it out. Finally a Cummins diesel rep clued them in that the turbocharger was defective and was eligible for warranty replacement – except that there were no replacement parts available anywhere because the problem was so widespread.
“The check engine light finally went out when the bulb burned out, after I had to endure 3 continuous years of brightness. When the transmission started acting up and the upholstery in the cab began to disintegrate – the seat covers seemed to be as thin as newspaper – I decided it was time to dump the vehicle. So now I’m the proud owner of a 2013 Ford F-150 King Ranch 4-WD, which is a real pickup. I’m one and done on Dodge or anything Chrysler. To any prospective used pickup buyers out there, don’t buy a 2008 Dodge diesel. You’ll be sorry and poorer.”
“My 2011 Ford F-150 King Ranch is the quietest, best-riding pickup I’ve ever owned. I love the EcoBoost engine which gets about 19 mpg overall. It has a lot of torque and is like driving a high-speed diesel. On the highway it seems to just keep shoving me in the back, and will go well past 100 mph.
“I like Deere 8000 series tractors. I’ve owned an 8100 MFWD 8400T, 8320 MFWD, and now an 8295R MFWD. These tractors have a lot of power, good fuel economy, super cabs and a level of quality and sophistication second to none.
“I’m also pleased with the Morton buildings we’ve put up – a 54 by 99-ft. model in 1996 and a 54 by 75-ft. model in 2003. These buildings are just as tight and bright today as the day they were built. Super sliding door quality, too. Great service and construction.”
Ford F-150 XLT 4-WD supercab 1/2-ton pickup
2 Best Buys0 Worst Buys“Over the last seven years I’ve owned a number of different Apple computers - three iBooks, two iMacs, one Mac Mini, and one MacBook -and I have nothing but good things to say about all of them. The best thing about using an Apple computer is you don’t have to worry about viruses. It’s easy to email friends, family and co-workers, browse the Web, and work with Microsoft Office documents including Microsoft Word, Excel, and PowerPoint without the troubles and worries of Windows. If anyone is looking for a new computer, I’d recommend you give the new offerings by Apple Computer a try. And I’m not an Apple dealer.
“My 2006 Ford F-150 XLT 4-WD Supercab 1/2-ton pickup equipped with a 5.4-liter, V-8 Trition engine and a 6 1/2-ft. bed is a best buy. With 365 ft./lbs. of torque, the engine has plenty of power for whatever I want to pull. It’s fuel efficient as well and gets anywhere from 15 1/2 to slightly more than 18 mpg. I really like the way it rides and handles on the highway. The company definitely means what they say when they claim it’s ‘Built Ford Tough.’”
Wilbur M. Rohrer, Dayton, Va.: Wilbur's happy with his 1989 Ford F-150 XLT 4-WD pickup that’s equipped with a 6-cylinder engine and 5-speed transmission. “I like the fuel injection, The engine never hesitates or chokes too much. The transmission is a bit fast for off-road work, but it works fine on the road.”
Ford F-250 3/4-ton pickup
2 Best Buys0 Worst Buys“My 1972 Ford 4000 low profile SU tractor has almost 8,000 hours on it but still has the original brakes and clutch. I bought it used when it was one year old, equipped with an industrial loader. It has its own hydraulic pump on front that’s belt-driven off the engine driveshaft, with the hydraulic reservoir built into the loader frame. It’s a lot stronger and quicker than loaders that run off tractor hydraulics. This tractor doesn’t use any oil between changes.
“My four Stihl chain saws are all best buys. They include a model 011, two 034’s, and model 036.
“My 1979 Ford F-250 3/4-ton pickup has about 150,000 miles on it and still runs great. It’s equipped with a 400 cu. in. engine and a 4-speed transmission. About 15 years ago I mounted dual wheels and a flatbed on it so I can use it like a 1-ton pickup. I use a 12,000-lb. Warn electric winch with this pickup, which is also a best buy.”
James recently called FARM SHOW to let us know about a problem he’s having with his 1994 Ford F-250 3/4-ton pickup equipped with a 351 cu. in. engine and 5-speed manual transmission. “The problem is that the seals on the slave cylinder that control the clutch fail in cold weather, leaving the driver without a clutch,” he says. “I was told we’d have to spend $468 to have the seals replaced. One dealer won’t even admit there is a problem. Another dealer says there is a problem, but that it’s worst in cold weather areas and doesn’t happen to all models. I haven’t received any help from the company at all. Several of our neighbors have also had this problem. I’d like to know if there’s a solution and would like to hear from anyone else who has had this problem.”
Ford F-250 4-WD Super duty pickup-service truck
2 Best Buys0 Worst BuysA 2000 Ford F-250 4-WD Super Duty pickup-service truck that he bought used five years ago rates as Mark’s “best buy”. “I use it 7 days a week in my business and have put about 160,000 miles on it, replacing only a water pump and 8 filters. It’s by far the best service truck I’ve ever owned. It gets 16 mpg. Too bad they don’t make the 7.3-liter engine any more.”
Delbert owns a “best buy” 1996 Ford F-250 4-WD Super Cab pickup equipped with a short bed. “With an extended cab and short bed it turns short and has good towing qualities.”
Ford F-250 SuperCab diesel
0 Best Buys2 Worst Buys“My worst buy is my 2010 Ford F-250 SuperCab diesel. The truck drives nice but drinks fuel like crazy. The best mileage I’ve gotten with it is 15 mpg. It’s much worse when pulling, most likely from the lack of horsepower. I bought this truck brand new and was told the mpg would get better when I hit 30,000 miles. At this point, I only have 50,000 miles on it because it costs too much to drive.”
Ralph Kropp, Grove City, Ohio: “Ralph isn’t pleased with his 1991 Ford F-250 Supercab pickup. “It has an extremely poor paint job. The dealer won't admit the problem, but he touched up the paintand says it’s okay now. Also, he had to replace the ring and pinion gear twice with only 4,000 miles on it. We should have kept the 1979 Ford F250 that we traded in. It had a great paint job and still ran good. “My best buy is my 1990 Deutz-Allis 9150 tractor. It has 150 hp. After the dealer installed several update kits, it now has plenty of power and uses only about 70 gal. of fuel a day, compared to 100 gal. a day on the 100 hp tractor that we traded in.”
Ford F-250 Supercab 4-WD pickup
2 Best Buys0 Worst Buys“Other than a few minor problems that were taken care of by the dealer, it has been trouble-free,” reports Michael about his 1997 Ford F-250 Supercab 4-WD pickup. “It has a 460 cu. in. engine and a 4:10 rear end which gives it plenty of power. I really like the extended cab. It has plenty of room for our two small children as well as my wife. The only negatives are that it’s not too easy to get into the rear seat, a problem that has been taken care of on the new series models. Also, it could be more fuel efficient. It gets only about 10 mpg. Overall I’m well pleased with it. I’d definitely buy another one, especially the new series. I like them very much.”
Charles Crampton, Tallahassee FL: Charles is impressed with his 1990 Ford F250 Supercab 4-WD XLT Lariat pickup equipped with a 7.3 liter diesel engine and E40D transmission (automatic overdrive). “It has great pulling power, improved fuel economy, and plenty of room in the cab for kids and cargo,” Dale Seyfred, Galien, Mich.; Dale is the satisfied ownerofaDMC Calc-U-Dri which he installed on his Shivvers in-bin continuous flow grain dryer last fall. “It automatically tests and regulates grain moisture which allows me to sell corn that’s more uniform in moisture content. It also climinates overdrying and the need to take samples all the time.”
Ford F-350 Dually pickup equipped
1 Best Buy1 Worst BuyA 2005 Ford F-350 Dually pickup equipped with a 6.0-liter engine rates as Alvin’s “worst buy”. “The company put all sorts of pollution components on this pickup but won’t stand behind them. It has caused us lots of trouble, and I don’t know why that should be at our expense.”
Lockwood likes his 2002 Toro 300 series Wheel Horse Classic garden tractor equipped with a 15 hp Kohler engine and 8-speed transmission. “This machine is built with quality. We use it to pull a ground-driven manure spreader and also to mow small pastures.”
On the minus side, he lists his 1997 Ford F-350 Dually pickup equipped with a 460 cu. in. engine. “At 25,000 miles the exhaust pipe deformed where it attached to the exhaust manifold, causing the oxygen sensor to have a false reading. The pickup started running badly, but the dealer said there was nothing wrong. We had a replacement pipe installed by an independent repair shop. The pipe was redesigned to prevent the problem from happening again. Too bad the dealer didn’t know how to solve this problem.”
Ford F-800 diesel truck
1 Best Buy1 Worst BuyDon Bromley, Brandon, Manitoba: “It has a lot of power and is easy on fuel,” says Don, pleased with his 1990 Case-IH 2096 tractor. “The cab is quiet and has good visibility, and the steering is light and responsive, “My 1989 Ford F-800 truck equipped with a 429 cu, in, gas engine is my worst buy. The engine is hard on fuel and lacks power, and it’s hard to shift into second gear. After I spent two years complaining to Ford, their last words were, ‘It’s the nature of the beast so live with it.’”
Charles Phillips, McDonald, Tenn.: Charles is satisfied with his 1989 New Holland 848 round baler. “The bales are sized “It's the cat's meow for digging holes in stoney ground and works much better than any pto-driven auger.” so that I can carry them two wide on my trailer and still be road legal.” Charles’s 1989 Ford F-800 diesel truck “has plenty of power and gets good mileage.” His “worst buy” is his 1985 Lincoln Continental 4-door car. “It vibrated badly from the start. The dealer replaced the axles and drive shaft, but the car sull vibrated so bad thatthe cruise control wentout. wanted to trade the car in, but the dealer said it had almost no resale value.”
Ford Festiva car
2 Best Buys0 Worst Buys“I bought my 1990 Ford Festiva used in 2000 and it now has more than 220,000 miles on it while requiring few repairs. This small 4-cyl. car gets more than 40 mpg and still drives like new.”
“My 1988Ford Festiva car has more than 195,000 miles on it but still uses very little oil and has a good-looking body. It gets about 40 mpg.
“Snap-On tools and toolboxes are also best buys for me. They hold their value just like Deere tractors.”
Ford Fiesta sedan
2 Best Buys0 Worst Buys“My 2011 Ford Fiesta sedan has 223,000 miles. It’s rusty and ugly, but it wears like a hammer.
“I recently purchased an Echo chainsaw. It’s comparable to a Dolmar 611. New gas saws won’t start dependably. They guarantee the saw but won’t allow it to be returned. I spent $500 for nothing. The EPA ruins everything it touches.”
“My Texas Fence Fixer lets me repair fences by myself and doesn’t require as much strength and maneuvering as regular methods (www.livestockshed.com; ph 800 621-8546).
“My 2011 Ford Fiesta isn’t as fuel ef¿ cient as advertised. However, it’s easy to drive and drives well.”
Ford LGT 14D lawn tractor powered
2 Best Buys0 Worst BuysA 1980 Ford 445 backhoe powered by a diesel engine rates as Russell’s “best buy”. “This is my second Ford backhoe. I previously had a 1968 4400 model equipped with a gas engine. It performed well so when I had an opportunity to upgrade I bought this model. It’s built heavier than the first one and does a great job.
“My 1960 Oliver 770 gas tractor is a best buy. I bought it used in 1972 and had the valves ground once.
“My Ford LGT 14D lawn tractor powered by a 14 hp diesel engine is cheap to operate. The only problem I had was when the seal on the mower deck gearbox went out and ruined the bearings.”
Russell Sprang, Kenton, Ohio: Russell is impressed with his 1989 Ford LGT 14D diesel lawn tractor equipped with a heavy duty 48-in, mower deck. “It turns short and mows level. The 3-cylinder, water-cooled engine runs very smooth and is fuel efficient.”
Ford Maverick pickup
2 Best Buys0 Worst BuysDouglas likes his 2024 AWD Ford Maverick pickup. “It runs well, is comfortable to ride in, and gets 28 mpg. It was about half the price of a full-size crew cab pickup.
“My 2023 Honda Pioneer 700 side by side is loud, low on power, slow and doesn’t have enough leg room.”
“My 2024 hybrid Ford Maverick is quiet, gets 35 to 55 mpg, handles great, and the amenities are really nice.”
Loren’s experience with his most recent hybrid Toyota Prius hasn’t been as positive. “After owning others and getting an average of 50 mpg from each, I expected my 2023 Prius would do the same. This car averaged 35 mpg, and Toyota wouldn’t help me. Toyota said the car was ‘performing as designed.’ I kept it for 10 mos. until my 2024 Maverick arrived. I’ve owned many Toyotas but will never buy another because of this experience.”
Ford Model T
2 Best Buys0 Worst Buys“We have five Kubota tractors here on the farm, from the small BX model up to a 73 hp. They’re all best buys.
“My original best buy is my first car, a Ford Model T. I purchased it for $70 in June 1952, and it’s still on the road. Henry Ford made a fine car with his Model T—over 100 years and still ready to ‘take us there and bring us back.’
“Most tools from China fall under the worst buy category for me.”
“My best buy of all time is the car my Dad bought for me in 1953 when I was just 13 years old - a 1924 Ford Model T. I’m 70 years old now but am still driving that car. Dad paid $30 for it. It still has the original magneto, which is built into the transmission and used to generate electricity.
“My 1984 Nissan 4-WD pickup is a best buy. The speedometer had about 350,000 miles on it when it broke 5 or 6 years ago. So I don’t know how many actual miles this pickup has now, but I still drive it every day. At 100,000 miles I took it in to have the valves done, but the mechanic said the engine was in great shape and sent me home without doing any work.”
Ford Ranger Super Cab pickup
2 Best Buys0 Worst Buys“My 1998 Ford Ranger Super Cab pickup has a 4-liter engine and automatic transmission. It’s a good pickup but we had a vibration problem at 55 to 60 mph. The dealer tried his best to help. He checked everything and balanced the tires three or four times. I think the problem is with the tires. I still feel the vibration on real smooth roads. The pickup has a lot of power but could use a higher rear end for better fuel efficiency.”
“My 1990 Ford Ranger Supercab pickup has 86,000 trouble-free miles on it. The 2.9-liter V-6 engine has a lot of power and gets 20 to 21 mpg. I’m waiting for the new 4-door Ranger to hit the sales lots. I won’t even consider buying another brand.
“MyFARM SHOW subscription is also a best buy.”
Ford Supercab pickup equipped
2 Best Buys0 Worst Buys“In 1979, I bought a short wheelbase Ford Supercab pickup equipped with a 460 cu. in. engine and C-6 automatic transmission with 3.50:1 axle ratio. Fuel economy was about 11 mpg with mediocre power.
“At 37,500 miles I replaced the heads with 1969 era 429 heads called DOVE-C’s. I also planed .050 in. off the heads to give me a 9.5:1 compression ratio and re-timed the camshaft to 1969 specs, which amounted to about an 8 degree advance compared with 1979 specs.
“The horsepower doubled and fuel economy went up to 14 mpg. Then I replaced the 3.50:1 axle with a 2.71:1 gear set, which gave me plenty of power and boosted fuel economy to 18 mpg.
“The truck now has over 212,000 miles on it and the pistons and automatic transmission have never been touched. It has never let me down in the field or on the highway even though I use it to pull trailers, old tractors, etc. I’m hoping to get over 300,000 miles out of this ‘best buy’ pickup.”
Martin Mackenthun, Frazee, Minn.: Martinrates his 1989 Ford Super Cab pickup equipped with a 6-cylinder fusl-injected engine and 8-ft. box as a “best buy”. “It’s a smooth rider and gets 23 mpg.”
Ford Tempo
0 Best Buys2 Worst BuysMarvin’s had trouble with the brakes on his 1991 Ford Tempo and has been frustrated in his efforts to solve the problem. “One day my wife was driving the car and one of the rear wheels locked up in traffic. Luckily she was going only about 20 mph. She tried backing up and the wheel came free. Luckily she was able to make it home okay. We had the 50,000 mile extended warranty and this happened at 56,000 miles. I removed the brake drum from the wheel and found that the automatic adjuster had fallen out and got caught in the drum, locking the wheel and crushing the end of the emergency cable. The problem was that the adjuster had never expanded as the brake lining wore down, allowing the adjuster to fall out and get caught in the drum. I removed the other rear wheel and drum and found that it had never expanded, either, which kept it from engaging. It appears that the adjuster wasn’t properly installed and couldn’t self adjust - the large end of a notched piece is pushed directly against the emergency arm instead of being beside it.
“Apparently, frequent adjustment of the emergency brake by the dealer had compensated for the non functioning adjuster before the wheel locked up, thus keeping the brake pedal travel near normal. I expected my dealer to supply free parts so that I could repair the brakes myself. However, he said they were no longer obligated to supply free parts since the failure occured after the warranty had expired.
“I asked the dealer to come out and look at the problem, but he said he wouldn’t waste his time as he had no way of knowing if someone had tampered with the brakes. Yet I bought the car new from him and he had always serviced it. In checking with various brake shops I find this problem isn’t an isolated case. If this brake had locked up a few days earlier when we were going 55 mph on a four-lane freeway, it could have caused the car to possibly skid around and result in an accident.
”I think this is a serious problem that could affect thousands of people.”
Virden Smith, Findlay, Ohio: Virden’s had trouble with his 1986 Deutz DX 110 tractor. “The clutch went out at 1,000 hours and the hydraulic valves had problems. The brakes had to be rebuilt. The transmission bearing failed and wiped out a ring and pinion as well as a differential case and bull gear. I had owned a Deutz 9006 for nine years with no problems, “My 1989 Ford Tempo has 14,000 miles and hasn't been back to the dealer once.” Eugene Bissey, Dwight, Ill..; “My 1990 Toro 21-in, recycler mower is a worst buy. The bagger door wouldn't stay open but the dealer fixed it. Then after about 14 hours of use the door cracked. The rear wheel drive is very unhandy. Poor quality forthe money. “My 1989 Ford Ranger XLT Super Cab pickup is a best buy, Handles great in all weather, rides good and starts great.”
Ford TW-10
2 Best Buys0 Worst BuysBrad Parking, Dresden, Ontario: A 1980 Ford TW-10 is Brad's “best buy”. “It has fairly good power for its size, good maneuverability and hydraulics. However, the manufacturer should install better gauges and reposition the gear shift.”
Tom Davis, Greybull, Wyo.: ‘‘I'd like to nominate my Ford TW-10 tractor as best buy. It's a much better designed and built tractor than the International 66 series tractor I have owned before. have over 1,000 hrs. on the TW-10 and have had only a couple of very minor problems. Dealer service has been excellent.”
Ford TW20
2 Best Buys0 Worst BuysIowa City, Iowa: He nominates a 1980 Ford TW20 tractor, a Fairfield hydraulic trailer and a 1983 Kinze 8-row 30-in, planter with Kelderman fold as “best buys". The Ford has outstanding performance and reliability. The trailer is the only way to move hogs and works great for moving bales, equipment and other loads. The planter is well-built with plenty of iron and the Kelderman fold can fold the planter in less than 1-minute. A very dependable outfit."
Glen females have gone on to produce breed champions. Both the male and female Grand Champions at the 1985 Regina Agribition go back to this cow. Blonde d’ Aquitaine cattle are the up and coming beef breed of the future. They're easy calving, have gentle dispositions and, in government bull tests in Alberta, they had the best feed conversion rates and highest rates of gain.” Edward E. Schultz, Enid, Okla. “I'm disappointed with most later model tillage equipment. I think the manufacturers have gone overboard on clearance. Some chisels and field conditioners have frames so deep they gouge every hump in the field. Some plows, for example, are 25 to 30 ft. long. They're hard to control.”’ Edward's pleased with his 855 Versatile and his 1983 Ford TW20 FWD tractors. ‘“‘Both have been dependable and I've experienced only minor problems, The cab on the Ford is still not perfect but it's a 75% improvement from what they had."
Ford TW25 4-WD tractor
2 Best Buys0 Worst BuysDonald nominates his 1984 Ford TW25 4-WD tractor as his “best buy”. “I use it to pull a vacuum tank and haul liquid manure from my hog buildings. I inject the manure into the ground. I have to drive it a lot on county roads in order to get to my fields, but fortunately it’s really easy on fuel. I change the engine oil every 100 hours and never have to add oil between changes. It has a lot of power, traction, and comfort.
“My worst buy is my 1985 Chevrolet C-20 4-WD pickup. It has only about 29,000 miles on it but I’ve had trouble with the electrical system including the lights, turn signals, stop lights, windshield wiper, and washer. I also had to replace the hydraulic clutch, slave cylinder, and master cylinder twice, but it’s still not working right. The only good thing about it is the 6.2-liter diesel engine. Next time I’ll buy a Dodge Ram.”
Carl DeBisschop, Middlebury, Vt.: “It's apure pleasure to operate,” says Carl, pleased owner of a 1984 Ford TW-25 4-WD tractor. “It has 1,000 hours and has been completely trouble-free. The cab is great.” On the “worst buy” side, Carl nominates a 1990 Ford 6-ft. wide, 3-pt. hitch finish mower. “The tail wheels constantly broke off. Sometimes they stayed on only for 15 minutes. After nine trips to the dealer the problem was finally solved.”
Ford TW30 tractor
2 Best Buys0 Worst BuysGary Barnard, Beatrice, Neb.: “My White 8700 combine is complete junk. The engine’s main seal went out before we even got the combine to the field, and by the end of the first year every belt had failed. It constantly heats up and plugs no matter what the conditions.” Gary says his “best buy” is his Ford TW30 tractor, “It has the longest torque curve of any tractor I've ever owned.”
Doyle Moore, Bethersprings, Tenn.: “My 1982 Ford TW-30 tractor was a lemon from the beginning, having defective injectors, brakes and hydraulic system. It was in the shop most of the time while under warranty. When the warranty expired, I spent $7,500 to repair the brakes and hydraulics and replace tires that blew out. The company worked on these problems faithfully, but the tractor never performed satisfactorily. Finally 2 1/2 years after buying it] took it to a sale and got just $9,950.”
Ford TW-35
2 Best Buys1 Worst BuyArlen Bonde, Kathryn, N. Dak.: Arlen nominates his 1989 Ford TW-35 front wheel assist tractor as his “worst buy”. “Judging by the way they designed the radiator screen, they must have thought this tractor would be driven only on the highway. There are big gaps on the corners of the screen that let in pieces of straw. Also, pieces of straw kicked up by the front tires get sucked in under the fuel tank. On windy days I have to clean out the radiator two or three times. “The air filter design inside the cab is a joke. The filters are secured by small plastic holders, but there’s no way to adjust them to get them tight and so much dirt gets sucked into the cab that it won't stay clean, One of the plastic holders broke, allowing a filter to fall out, and I accidentally drove over it with the tractor. “The engine leaked oil and anti-freeze onto the front wheel assist driveline and made a mess. The seat is poor quality and ripped after only one year. The tractor is underpowered and uses too much fuel. The transmission gears are so close to each other in speed that one third of them are useless. The hydraulic levers are poorly positioned and won’ t stay in their proper settings. The hydraulic system leaks a gallon of oil per day. The tractor was supposed to come with a 3-year warranty, but our dealer wouldn't ninate suys fix anything without charging us for it. The adjustable steering wheel is located so far from the seat that I have to lean over toreach it. If I slide the seat ahead so I can reach the steering wheel, my knees hit the dash, “My Deere 4760 tractor is my best buy. It's rated at only 5 hp more than the Ford TW-35, but it can pull everything 1 mph faster and uses much less fuel. I had a few small problems with it, but my dealer fixed them at no cost. Deere tractors cost more to buy, but at resale you lose twice as much with a Ford. “My Deere 9600 combine is a best buy. It's a quiet machine, and daily maintenance is faster than on any other combine I’ve ever used. We combined all year without any down time.”
Andrew N. Smith, Piffard, N.Y.: “Our most recent worst buy is a Surge automatic soap and acid dispenser. It was purchased new in 1986 and discarded in early 1987. The unit would suck the seal down into the metering device instead of pulling liquid from the barrel. Dealer service was so poor we had to terminate our agreement with the local Surge dealer. We now deal with a Germania dealer who can fix Surge equipment.” On the “best buy” side, “Our 1986 Ford TW35 tractor with MFWD is one of the best tractors on the market. It pulls a 30-ft. cultimulcher at 5 mph and turns great without using the brakes. We also pull a 30-ft. field cultivator with it. The tractor is light enough to go over soft spots but has excellent traction.”
Ford XLT 4-WD supercab pickup
1 Best Buy1 Worst Buy“It’s fuel efficient and has a quiet cab with a lot of room,” says Paul about his 1994 Dodge 1500 4-WD pickup equipped with a 318 cu. in. engine and automatic transmission. “No problems after 32,000 miles. “My worst buy is my 1989 Ford XLT 4-WD supercab pickup with a 302 cu. in. engine and automatic transmission. It gets only 10 to 12 mpg. The paint is peeling off the hood and the electric windows and locks have failed repeatedly.”
Howard Metsker, Buhl, Idaho: Howard's happy with his 1990 Ford XLT 4-WD pickup. “Starts good in cold weather and is fairly fuel efficient at 15 mpg. It rides like a passenger car, yet handles rough terrain like a goat.” Larry O’ Brien, Olney, Ill: Larry's 1991 A-Maize-Ing Heat shelled com forced air furnace heads his “best buy” list. “It performs exactly as advertised and heats my 2,000 sq. ft. home on 1 1/2 to 2 bu. of corn “It rides like a passenger car, yet handles rough terrain like a goat.” per day. It keeps the house much more comfortable than the LP gas heat we had been using for about half the cost. I was so pleased with it that became a dealer.” On the minus side, “My 1991 Acu-Grain GMS-4 combine yield monitor is a worst buy. The company claimed it would indicate the number of bushels with 99% accuracy because it measured volume with a grain sensor baffle. We tried it and decided the best place for it was in the junk pile. The combine always has to be on level ground while unloading for it to work properly. Anything that measures volume isn’t very accurate. I now weigh all my grain.”
Ford car
2 Best Buys0 Worst BuysAlbert Prich, Owendale, Mich.:“My 1988 Chevrolet 1500 4-WD pickup has been nothing but trouble. I had to replace the front shocks, starter, intake manifold, valve guides, valve seals, and 4-WD switch, The cab rattles badly and it takes at Icast a minute to engage or disengage the 4-WD. The brakes are bad and remind me of the mechanical brakes on my father’s 1938 Ford car. When I use it to pull my travel trailer in hot weather, as soon as the temperature gauge reaches 225° the fan suddenly starts up. Within 15 seconds it drives the temperature down to 210°, then shuts off. Two or three miles down the road it starts up again. This cycle is repeated over and over. The defrosters fail to keep ice off the windshield and the heater controls are very poor. I have to take my eyes off the road to use them. Needless to say I'll buy a different brand next time.” Albert’s “best buy” is his Deere 4450 tractor equipped with radial tires. “It handles nice and has lots of power. “My Deere 2510 tractor is another best buy. It just goes and goes with very litle upkeep.”
John Jennissen, Sauk Centre, Minn.: A 1989 Deutz-Allis 7085 tractor rates as John’s “best buy”. “The air-cooled diesel engine is fuel efficient and starts easily in cold weather without overheating in hot weather. This tractor has lots of torque and the easy shifting, fully synchronized 20speed transmission has a speed to match any job.” James Anderson, Herman, Minn.; “I’ve owned 18 Ford cars over the last 33 years and this is the best one yet,” reports James, owner ofa 1989 Ford Mustang, “I've driven it 32,000 miles in 9 months with no problems. It’s fun to drive and gets super gas mileage.”
Ford 1000 tractor
1 Best Buy0 Worst BuysMichael’s happy with his 1975 Ford 1000 tractor. “This was Ford’s entry into the compact tractor market in the 1970’s. The tractor was made in Japan and is built solid. It’s equipped with a 2-cyl. diesel engine that has plenty of power. I use this tractor for many chores around our property including plowing snow with a rear grader blade, mowing brush, and fertilizing our lawn.”
Ford 100 1/2-ton 2-WD pickup
1 Best Buy0 Worst BuysLarry’s “best buy” is his 1964 Ford 100 1/2-ton 2-WD pickup. “I bought it one year ago equipped with a Model T flatbed for $500. I couldn’t be happier with it. The 292 cu. in. engine has a lot of power and the transmission and rear end are still solid. I replaced the oil bath air cleaner with a dry one and also installed a new U-joint. I plan to replace a tie rod end”
On the “worst buy” side, he lists his 1989 Chevrolet CK1500 4-WD light duty pickup. “The warranty service provided by my dealer was the only positive thing. At 50,000 miles the engine and radiator had to be replaced and the shifter on the 5-speed transmission had to be repaired. After the extended warranty expired I discovered that the front wheel bearings had to be replaced at a cost of $200 per set. Last summer the thermostat had to be replaced and it turned out to be quite a job. I feel that this pickup is mechanically unsound and built cheap.”
Ford 1 1/2-ton dual wheel flatbed
1 Best Buy0 Worst Buys“My 1979 Dodge D150 4-WD 1/2-ton Power Wagon pickup has about 320,000 miles on it and is still going strong. It’s a dependable pickup. All I’ve done is grease the brakes and change the oil, belts, and hoses.
“My 1950 Ford 1 1/2-ton dual wheel flatbed truck has required only routine maintenance and is a best buy. It runs better now than it did when it was new.”
Wayne and Glenda Tankursky, front turn signals were changed during a recall. This was my second V-70 model. I gave the first one back after putting only about 1,500 miles on it. The rotors had warped and the transmission leaked. I think Volvo has gone downhill ever since Ford bought them.
Ford 1156 4-WD tractor
1 Best Buy0 Worst BuysWayne Juhl, Greenbush, Minn.: Wayne's impressed with his 1991 Ford 1156 4-WD tractor. “This is my second 1156. The other one was made by Versatile before Ford bought the company. The power and flotation on triple wheels is great. We also like the new slippage monitor because it lets us know at all times how the tractor is performing. “I love my 1991 Freightliner truck, equipped with a Caterpillar 3176 engine. The engine has more than 100,000 miles on it but has already been overhauled twice. The company repaired it without charge and it runs good now and gets good mileage. However, I'd hesitate to purchase a truck equipped with the same engine.”
Ford 1200 4-WD compact diesel tractor
1 Best Buy0 Worst BuysAndy owns a 1962 Ford 1200 4-WD compact diesel tractor. “I use it to pull a 5-ft. rototiller in my mostly sandy soil. This machine is still going strong and is a real workhorse.”
Ford 1210 16 hp 4-wd
1 Best Buy0 Worst BuysRaube’s satisfied with his Kubota B7510 21 hp tractor equipped with a front-end loader and backhoe. “This machine never runs out of power and it feels like I’m using a much bigger tractor. I use it to operate a 5-ft. bush hog and to dig with the backhoe.
“The main shaft on my Ford 1210 16 hp, 4-WD tractor broke so I replaced it with a stronger shaft. The job required a big teardown. I use a 4-ft. bush hog with this tractor and adapted a 3-pt. mounted backhoe to it. The backhoe was originally designed for a Bolens tractor. I made a 3-pt. hitch for the backhoe and it worked great.”
Ford 1/2-ton 2-WD pickup
0 Best Buys1 Worst Buy“I bought a Deere Z645 zero-turn riding mower equipped with a 48-in. deck but, unfortunately, my wife drove off with it so I went back and bought another one. These mowers have more than enough power to cut tall grass. Good dealer support and a helpful parts department.”
On the minus side, he lists his 1997 Ford 1/2-ton 2-WD pickup. “The front end needed new ball joints at about 80,000 miles; the transmission had to be replaced; the rear end had to be rebuilt; and the gas tank straps broke so now we have to replace the tank. Also, the bed is rusting away even though we’ve always kept this pickup in a shed.”
Ford 1320 compact tractor equipped
1 Best Buy0 Worst Buys“My best buy is my 1989 Ford 1320 compact tractor equipped with a 17 1/2 hp diesel engine. We use it with a 60-in. lawn mower deck. It’s equipped with a 3-pt. hitch and 540 rpm pto. The diesel engine starts right up without a heater even in temperatures down to 20 degrees below zero. We use it to mow a large lawn, blow snow, operate an 8-in. dia., 55-ft. long grain auger, and many more jobs. We replaced one set of mower blades and also replaced the battery last summer. No other repairs at all.
“My 1979 Mix-Mill equipped with a 5 hp electric motor is a best buy. We use it to grind feed.”
Ford 13204-WD diesel tractor
1 Best Buy0 Worst BuysTommy Wagoner, Jonesville, N.C.: “My 1989 Ford 13204-WD diesel tractor is a best buy. I use it to power a 60-ft. long grain auger, to pull a 5-ft. Woods mower, and to pull tobacco trailers through muddy fields where larger tractors would bog down. ( Aa Ra ee ee i Best & Wo ( It's equipped with live plo, power steering, wet brakes, full instrument panel, differential lock, and 9-speed transmission, The big 4-cylinder engine has lots of power.” Tommy also likes his 1981 Ford 7700 tractor which he uses to pull a 6-row 30-in, sod planter. “The cab is superior to other brands.”
Ford 150 4-WD pickup equipped
1 Best Buy0 Worst BuysRupert House, Hailey, Idaho: Rupertis pleased with his 1991 Ford 150 4-WD pickup equipped with an automatic transmission, but says it could use one improvement. “A rear tire blew out at about 5,000 miles on a gravel road with lots of traffic. 1 had a miserable time getting the spare tire out. I would like to have had just one Ford engincer with me to help find the tire changing tools, get the jack under, and get the spare tire out and on.”
Ford 150 Explorer
0 Best Buys1 Worst Buy“It rides and drives well and has enough power to carry a good-sized load. It’s also fuel efficient,” says Ronald, satisfied with his 1994 Dodge Ram 1500 1/2-ton SLT pickup. A 1989 Ford 150 Explorer rates as Ronald’s “worst buy”. “It had problems with the paint peeling. The company repainted it at about 8,000 miles but the paint peeled again. They refused to paint it again so my dealer painted it for me at no cost. I’ve driven Fords all my life, and on every one I’ve owned since 1970 the exhaust manifold has cracked. It seems to me that 20 years should be enough time to correct the problem.”
Ford 1510 equipped
1 Best Buy0 Worst BuysBilly D. Johnson, Franklin, Ky.: Billy says his Ford 1510 equipped with front wheel drive assist and a Dunham front-end loader makes a “good working outfit” and is a best buy.
Ford 1600 17 hp tractor equipped
1 Best Buy0 Worst BuysThey nominate their 1978 Ford 1600 17 hp tractor equipped with 9 forward and 3 reverse gears as a “best buy”. “It’s an excellent machine that starts in all weather conditions and uses little fuel,” says David. “It does the work of a tractor twice its size. We use it mainly for finish mowing, but also to grade our driveway, move snow, do landscape and posthole work, and bush hogging. We even use it to tow other tractors when they won’t start.”
Ford 1620
1 Best Buy0 Worst BuysSteve Kuntz, Park, Kan.,: Steve's best buy is a Ford 1620 compact tractor with front wheel assist. “It has a good diesel engine and hydrostat which work well for my small lawn rototilling business. At the same time, the tractor has plenty of power to feed a large round bale to my cows.”
Ford 17 hp riding mower
1 Best Buy0 Worst Buys“My 1999 Ford 17 hp riding mower is my best buy. No problems. It cuts grass evenly, unlike some mowers that cut high on one side and low on the other.”
Ford 1715 tractors
1 Best Buy0 Worst Buys“Two years ago I bought a pair of used Ford 1715 tractors, which I think are the best tractors ever built. They’ll run all day on just a little fuel, and they’re easy to work on.
“My Chinese-built Kama tractor is poorly built. There are loose bolts everywhere, and the warranty is no good.”
Ford 1720 4-WD loader tractor
1 Best Buy0 Worst Buys“I use my Ford 1720 4-WD loader tractor just about every day and it works great.
“My Deere 3020 is also a good tractor.”
Ford 18 hp hydrostatic drive
1 Best Buy0 Worst Buys“Our 1995 Ford 18 hp hydrostatic drive riding mower has power and is a best buy.”
Ford 1900
1 Best Buy0 Worst BuysAaron Coe, Mt. Pleasant, Iowa: ‘'! own both a farm and a construction business. My little Ford 1900 4-WD diesel works great as a chore tractor, even hauling grain wagons in from the field. can use it all day and only consume 3.6 gal. of diesel while plowing all the gardens in town with a 2-bottom plow. In construction, I have used it to grade the job site as well as seed the lot, It brings praises from customers and neighbors on every job site. The light weight combined with the low center of gravity has allowed me to use this tractor in many back saving ways.” Aaron's “worst buy” is a Rockwell ¥-in. heavy duty hammer drill. “I use this drill primarily to drill concrete. I drilled three holes with it and the nylon gears simply wouldn't hold up. The company repaired the drill and I tried again. This time I drilled nine holes before it again broke down. To finish the job, I bought a Makita ¥2-in. hammer drill. The Makita is fantastic. It's such a pleasure to havea good and reliable tool, that I never even repaired the Rockwell drill."
Ford 1910 4-WD tractor
1 Best Buy0 Worst Buys“They don’t make ‘em like this any more,” says Ron about his 1967 Ford 1-ton pickup equipped with a dump box. He also owns a 1969 Ford 1/2-ton pickup. “Both pickups are still working great.
“I also like my Ford 1910 4-WD tractor. It’s amazing what this little tractor will do.”
On the “worst buy” side, he lists the Ryobi battery-powered drills he uses at his job. “I can’t get much use out of these drills because the batteries always seem to be drained. I’d never buy any of the company’s 12-volt, 18-volt, or 14.4-volt models. Some of the good battery-powered drills I’ve used include DeWalt, Panasonic, and Bosch.”
Ford 1920
1 Best Buy0 Worst BuysCarl F. Butler, Mesick, Mich.: Carl likes his Ford 1920 4-WD tractor equipped with a front-end loader and 2-speed transmission. “It's very agile and has a lot Of power.”
Ford 1-ton 4-door pickup equipped
1 Best Buy0 Worst BuysJames is happy with his 1995 Ford 1-ton 4-door pickup equipped with a 460 cu. in. gas engine and 5-speed manual transmission with overdrive. “It has ample power for pulling heavy loads and a lot of cab room, and the two extra doors make it nice for transporting my crew. But what I like best is that it has a really smooth ride due to the extra long frame. No problems.”
Ford 2000
1 Best Buy0 Worst BuysRoy F. Hamm, Mansfield, Mo.: He owns a "best buy' Ford 2000 that dates back to 1964. 'We've always had trouble-free performance and it's economical to operate. I've always wished it had pressure relief valves on the hydraulics though, for when goof and get equipment in a bind. I'd also like to see sliding counter weights to help prevent tractors from tipping over in hill country. We made our own modified radiator grill guard. The original looked good but was useless."
Ford 2120
1 Best Buy0 Worst BuysDan Smith, Northport, Wash.: “It's easy to use, trouble-free, and makes strong, clean welds,” says Dan about his 1993 Lincoln 130 SP MIG welder. “Lalso like my 1993 Du-All backhoe. [t's trouble-free and works great for digging trenches around our ranch, We mount it on our Ford 2120 tractor.”
Ford 2120 4-WD tractor
0 Best Buys1 Worst BuyHarold nominates his 1991 Ford 2120 4-WD tractor as his “worst buy.” “At first I thought I had made a good buy because this tractor performed so much better than my previous Case 885 2-WD loader tractor. With that tractor I was always getting stuck while cleaning out ditches and trying to back out with a loaded bucket, whereas the Ford could handle that kind of work well. But the Ford wasn’t as good as the Case when it came to plowing. The Case could pull a 3-bottom plow with no problems. I only put a 2-bottom plow on the Ford, but if I didn’t have the tractor in 4-WD the wheels would just spin.
“In September of 1992, with just 340 hours on it, the Ford started having problems. The bell housing broke into five pieces. However, the tractor was still under warranty so the company paid for it. The tractor had been sagging down in the middle and, in my opinion, it had to have put pressure on some gears in the transmission. The dealer got paid only for the time the company figured it should take to change a bell housing. So they didn’t want to take the time to see if there was any other damage inside the transmission.
“Then in 1999, with 1,325 hours on the tractor, I heard a noise in the transmission gears. The dealer took the transmission apart and found a gear that was all chipped up. No gears were completely broken, but they ended up changing three gears, the gear slide, and a center shaft. With parts and labor the total repair bill was $1,521.95. They told me it looked as if the transmission had been low on oil at some time or other. But I know that wasn’t true.
“In 2000, with 1,462 hours on the tractor, the front wheel drive locked up due to a piece of metal between two cogs in the gearbox located in front of the transmission.
“At 1,490 hours the transmission started making a terrible growling noise whenever I put it in reverse. The dealer took the tractor apart and changed a bearing. Then they decided to change all the bearings in the transmission just to play it safe. But that still didn’t solve the problem.
“I’m tired of being a guinea pig and paying for all these repairs. I was told I would have to pay to have anyone come to my place and even listen to the noise. Now I can sometimes hear the noise with the transmission in a forward gear. I can also hear the noise by putting the clutch in and out without the transmission in gear.”
Ford 2500 2-WD pickup equipped
1 Best Buy0 Worst Buys“My 1996 Ford 2500 2-WD pickup equipped with a 351 cu. in. engine and 3:55 rear end is a real lemon. It has about 21,000 miles on it. It gets only 4 to 8 mpg pulling a 26-ft. trailer and 8 to 11 mpg without the trailer. We’ve taken it back to three different Ford dealers a total of seven times during the last two years. They all tell us there’s a problem, but no one wants to fix it. Fuel economy is so poor we can’t even afford to drive it. We’re now looking for a good Ford mechanic, or for a buyer.”
Ford 250 4-WD turbocharged diesel truck
1 Best Buy0 Worst BuysHartley Phillips, Wilton, Cal.: “My 1983 Ford 250 4-WD turbocharged diesel truck is a best buy. Mileage and power is super. We get 17 mpg pulling a travel trailer or machinery trailer.”
Ford 250 Lariat pickup powered
1 Best Buy0 Worst BuysGerald likes his 1997 Dodge 2500 extended cab pickup equipped with a turbocharged diesel engine. “Last winter we used it to pull a 35-ft. fifth wheel trailer to Arizona and Texas. It averaged anywhere from 10 mpg in a head wind to 16 mpg in ideal conditions. We pulled it in fifth gear all the time except when we had to downshift in the mountains. The rear axle has a 3:54 ratio. It rides really nice and gets 20 to 26 mpg empty.
“We previously used our 1991 Ford 250 Lariat pickup powered by a diesel engine to pull the same trailer, but it never got more than 10 1/2 mpg even though the engine was turbocharged. This pickup had a lot of problems. The company worked it over twice but the transmission still was noisy and vibrated. There were also problems with the cruise control, axle seals, glow plugs, electric door locks, and more. I traded it in at 18,000 miles for the Dodge. Good riddance.”
Ford 250 Super Duty pickup
1 Best Buy0 Worst Buys“My 2008 Ford 250 Super Duty pickup runs and drives good and is very stable on the road. It gets 10 to 13 mpg empty and 6 to 8 mpg pulling a trailer. My only complaint is that the fuse block in the cab is hard to service.”
Ford 2810
1 Best Buy0 Worst BuysErnie Rinehardt, Rockwell, N.C.: “It has good pulling power and averages 21 to 23 1/2 miles per gallon,” reports Ernie, satisfied with his 1991 Dodge diesel 4-WD truck equipped with a Cummins diesel engine. “My 1987 Ford 2810 is also a best buy. It's a very versatile tractor for its size.”
Ford 2-WD tractor
0 Best Buys1 Worst BuyJSE William Dorminy, Alapaha, Ga.; “My worst buy and biggest lemon ever is my 1991 7710 Ford 2-WD tractor, The entire tractor has vibrated badly from day one and no one seems to be able to figure out what the problem is. At times the vibration is so bad your hands go numb because the steering wheel shakes so badly. The dealer I bought it from offered to exchange it for a new tractor but he went bankrupt before we were able to do that. I’ve taken it to two other Ford dealers and talked to the regional office in Atlanta, but no one will do anything. They suggested I put new tires on but since the tractor also vibrates when you rev it up at idle, I think the problem’s in the engine or transmission, The tractor vibrates so badly now we're no longer able to use it. “Another problem with the 7710 is that the hydraulics don’t have enough power to pick up a 4-bottom plow and won't turn a hydraulic motor at a constant speed. Also, the air conditioner went out, the clutch had to be replaced, the radio antenna vibrated off, the radio broke, the radiator shook apart and we’ve had many other similar problems.” William says his “best buy” of all time is his 1969 4020 Deere tractor. “It’s a good all-around machine with plenty of power ominate t Buys and it’s easy to handle. I'd buy two more today if they were available.”
Ford 3/
1 Best Buy0 Worst BuysRichard Witkovsky, Caro, Mich.: “The best buy I've ever made is my 1979 Ford 3/ 4-ton pickup with a 300 cu. in. 6-cylinder engine. Ithas 106,000 miles. I wasn'ta Ford man until I bought this truck, but the price wasright. The engine runs great, doesn’t use oil and gets good mileage.”
Ford 3/4
1 Best Buy0 Worst BuysDave Scott, Springdale, Washington: “I'm pleased with my Kubota M4500 DT and M7500 DT tractors. Great performance, good fuel economy and our two 7500's start especially easy for diesels, "My 1978 4-WD Ford 3/4 ton pickup leaves something to be desired, however. I purchased it new with a 6-cyl engine for fuel economy but all I got was less power. Mpg is about as high as any other pickup. The heater hasn't warmed up since the warranty expired. However, it starts and runs good." David R. Wolfinger, Ottsville, Pennsylvania: "My 1979 International 686 wactor is easy to handle, comfortabic and easy on fuel. Requires no maintenance other than filters and tires. I use it for planting, spraying, mowing, baling and towing silage wagons." Alice L. Wheeler, Richmond, Maine: Alice's “worst buy" is a Martin Scavenger Manure Spreader. "The drive chain was faulty and links kept separating . The company replaced them with new sprockets and larger chain. The wheels also kept loosening up. I had to drill hubs and put in studs. The tubeless tires also kept going flat. Driving on flat ground would break the bead. put tubes in them but the spreader should be designed with larger tires. "On the other hand my best buy is a Westphalia computer grain feeder. We had excellent help installing the feeder. It's been trouble-free the first year."
Ford 3400
1 Best Buy0 Worst BuysDuane Pearson, Ogilvie, Minn.: “We bought our 1981 Case 5806 tractor with loader used last spring and haven't been sorry. It has good power and weight for loading. The hydrostatic drive is reliable and fast. It's more maneuverable than our previous loader tractor, a Ford 3400,” Best And Wo (Continued from preceding page) bought it new in 1967 and it’s never needed a major overhaul. The tiller has been a joy to operate for all large garden work. We do 342 acres with it. It's a flawless machine."
Ford 340B tractor equipped
1 Best Buy0 Worst BuysRichard’s “well satisfied” with his 1986 Ford 340B tractor equipped with a front-end loader.
Ford 3/4 Supercab pickup
0 Best Buys1 Worst BuyRex Ballard, Waynetown, Ind.: Rex is disappointed with his 1989 Ford 3/4 Supercab pickup. “It's reliable, but uses oil and needs a 40-acre field to turn around. “My best buy 1989 New Holland TR86 combine produces clean grain and isa pleasure to operate.” Allan Ling, Hunter River, Prince Edward Island: Allan says his Massey “It's reliable, but uses oil and needs a 40-acre field to turn around.” Ferguson 828 round baler “makes a uniform bale, never plugs, and is easy to operHis 1979 Ford 3/4-ton 4-WD pickup has more than 200,000 miles, “I’ve used it on short drives and to pull heavy loads,”
Ford 3/4-ton 4-WD Lariat special pickup equipped
1 Best Buy0 Worst BuysCarl Bock, London Mills, Ill: Carl's the satisfied owner of a 1990 Ford 3/4-ton 4-WD Lariat Special pickup equipped with a460cu. in. engine. “It has plenty of power, more leg room than a Chevy, and holds the road well. My wife likes it, too.”
Ford 3/4-ton 4WD Super cab pickup
0 Best Buys1 Worst BuyDonald Klehm, Dwight, Ill: Donald's had problems with his 1990 Ford 3/4-ton 4WD Super Cab pickup. “It's equipped with an overdrive automatic transmission, 4.10: 1 ratio rear end, and 460 cu. in. engine for pulling heavy loads. Itrides better than most cars, but the milcage, even with fuel injection, is terrible. Also with all the advances in the paint industry I can’t believe they don’t use paint that doesn’t chip so easily. “My 1989 Top Air trailer sprayer, equipped with a S00-gal. tank and 42-f1, boom, is a best buy. It's very well constructed and can be used between the tractor and implement. With this ‘Master Link’ option, the wheels are on walking tandem axles and can be widened to 120 inches, When set up this way the sprayer and boom (equipped with Spraying Systems nozzles) rides better than the tractor pulling it. “Another best buy is my 32-ft. Fuerst chain link harrow and cart. Itdoes an excellent job of chopping corm stalks, breaking clods, and incorporating herbicides. However, it should have a longer hitch so I could pull it behind comparable size disks and cultivators.”
Ford 3/4-ton Power Stroke pickup
1 Best Buy0 Worst Buys“My 1999 Ford 3/4-ton Power Stroke pickup is absolutely my best buy. I purchased it with 50,000 miles on it in 2000. It now has 440,000 miles with no major repairs. Regular oil changes, brakes and tires were my only expenses. It still has plenty of power to pull my Deere 410 backhoe which weighs approximately 18,000 lbs.”
Ford 350
1 Best Buy0 Worst BuysJerry Darling, Perry, Mich.: “I installed a Fish carburetor on a Ford 350, V-8 engine and found it to be extremely touchy to adjust and the engine very hard to start on cool mornings. When the carburetor was adjusted for economy the truck wouldn't go. When adjusted for power, mileage was terrible — no better than with a standard carburetor. We returned the carburetor under the 90-day refund program. Seven months later we still haven't received a refund,” shined up. I have an older 1968 that still has a better paint job and looks better than this newer model. “TL also have a 1975 Steiger Bearcat Il. Its 3208 Caterpillar motor went out at 800 hrs. caused by a rubber hose on top of the tappet cover that got a hole in it. Now I replace this hose every year regardless of its condition. Also, the gears in the wheels went out last summer and it took 43 days to get replacement parts up to us here in Canada. Can't afford this kind of service.” Wayne Hofer, Dolton, S. Dak.: Wayne's happy with his television satellite receiver dish from Automation Techniques, a model GLR 560 with a 10%-ft. Hastings aluminum dish and a Hytek programmable antennae control, “I bought this system last spring and have been very pleased with it. It gets more than 80 channels plus many radio stations."
Ford 3500
1 Best Buy0 Worst Buys“Going back to 1989 I’ve owned 5 different Woodmizer sawmills. The motors went out on my 1996 and 1998 models, but the company repaired them at no charge.”
A 2009 Dodge 3500 dually pickup rates as his “worst buy”. “I was able to put less than 200 miles on it before the front end started shaking, and I had to accelerate to higher speeds before it would stop. Finally a tie rod end on it broke. I traded it for a Ford 3500, which I really like.”
Ford 350 4-door pickup equipped
1 Best Buy0 Worst BuysThey like their 2002 Ford 350 4-door pickup equipped with a diesel engine. “It has more than 70,000 miles with no problems except for a leak in the fuel filter. It gets 16 to 17 mpg empty, and 12 mpg pulling a 16-ft. gooseneck trailer loaded with cattle. It also gets about the same mileage pulling a 31-ft. travel trailer. It has been back to the dealer only one time, for some kind of valve timing sensor. It cost about $36,000, which used to be the price of a good home.”
Ford 350 4-WD dually pickup
1 Best Buy0 Worst Buys“Our Ford 350 4-WD dually pickup, equipped with a 7.3-liter diesel engine and a homemade flatbed with a gooseneck hitch, has a lot of power and can go anywhere. It’s our service truck. Because of the dual wheels it works great for pulling a trailer. We expected a lot from this pickup, and it delivered.
“Our White field cultivator does a wonderful job, but parts for it are outrageously expensive - if they can be found.”
Ford 3550 industrial loader tractor
1 Best Buy0 Worst Buys“I recently sold my Ford 3550 industrial loader tractor and rear-mounted snow blade. In 16 years this jewel never failed to start once, but health issues forced the sale. It was the greatest snow machine ever, and after the heavy snow we had last winter it will be sorely missed.”
Ford 3610 1984 5610
1 Best Buy0 Worst BuysJohn Hoppe, Nicholson, Penn.: “My best buy of alltime is my 1956 Ferguson 35 tractor. The engine has been overhauled twice, but otherwise this tractor has had very few repairs. have no idea how many ( im De, warns @uru. 44 Best & Wol ( hours are on it, but for years it was the only tractor I used on four different farms. It's also been my ‘horse in the woods’ for hauling logs and firewood all these years.” Tom F, Crittenden, Mansfield, Penn.: “My 1983 Ford 3610, 1984 5610, and 1985 7710 tractors are all best buys. They all are fuel efficient and start easy. No problems except for a power steering line that was replaced on.the 7710, “One of my all-time worst buys was a 1976 Ford F-250 pickup equipped with a 360 cu. in. gas-guzzling, oil-burning engine. At 75,000 miles the box and front fenders were nothing but a pile of rust. It was helpless in 2-WD and not much better in 4-WD, I wanted to trade it, but I didn’t want to invest the moncy for an expensive new one. Instead bought an old 1972 1-ton truck and fixed it up. I’m still using it.”
Ford 3610 2-WD 42 hp
1 Best Buy0 Worst Buys“My 1984 Ford 3610 2-WD, 42 hp diesel tractor is the best tractor I’ve ever owned. It has more than 5,300 hours on it, yet all I’ve replaced are the tires and water pump. It’s now on its third battery. This tractor starts easy during the winter, is well balanced, and burns clean even while pulling a heavy load. Also, it doesn’t use any oil.”
Ford 3910
1 Best Buy0 Worst BuysKenneth says his Ford 3910 is a “best buy”. “It’s very handy around our farm. No problems so far. It’s also easy on fuel. One complaint is that there’s too much difference in speed between the second and third gears. I bought a front guard for it to protect the grille and front end of the tractor.”
Ford 3910 II tractor
0 Best Buys1 Worst BuyWalt Rybka, Morehead, Ky.: “My Skilsaw professional model 5656 circular saw should last forever. Black & Decker professional Piranha blades are also worth every penny.” Walt says his “worst buy” is his Mighty Mite portable band sawmill Generation II (Mighty Mite Industries, Portland, Ore.). “The hydraulic drive has never worked right, the blades break, and the blade grinder is hard to use and adjust. The company just ignores my letters.” His Ford 3910 II tractor is another “worst buy”. “The power steering sector shaft seals went bad. Ford has issued two service bulletins on the problem and redesigned the seals twice. The leak doesn't usually appear until the warranty expires, and then Ford says tough luck. I'll never buy Ford again.”
Ford 3910 II 4-WD loader tractor
1 Best Buy0 Worst Buys“My Toro zero-turn, 62-in. riding mower has about 1,500 hrs. on it and is a fantastic machine. It’s equipped with a Kohler engine that’s also terrific. It mows steep hills with ease.
“My Ford 3910 II 4-WD loader tractor had about 900 hrs. on it when the steering system started leaking. The front part of the tractor housing also leaks and there were problems with the clutch adjustment. Otherwise it’s a good tractor.
“My Deere 820 tractor equipped with a 3-cyl. engine is a well-engineered tractor, but at 2,500 hrs. the steering shaft started leaking.”
Ford 3-speed
1 Best Buy0 Worst BuysLee W. Hoeger, Sumner, Iowa: "It gets over 20 mpg and uses no oil. The only maintenance needed has been for brake pads and tires. Still has the original battery," says Lee about his "best buy" F100 Ford 3-speed pickup with a 300 cu. in. 6 cyl. engine. On the minus side, he lists his AD-DC Five Star Century welder. "The welder is alright but the ground clamp burned my hand the second time | used it. The company reps and dealers ignore you. Also, the welder is too expensive."
Ford 400 tractor
1 Best Buy0 Worst Buys“I bought my 1963 Ford 400 tractor used 10 years ago for $6,500. It starts every time and has a lot of power. I upgraded it with larger capacity hydraulics, a 6-ft. loader bucket, bicycle air horn, and drink holder. This tractor is my best friend. I also put steel angle brackets inside the bucket to hold forks I made from trailer springs to handle brush.”
Ford 4000 2-WD loader tractor
1 Best Buy0 Worst Buys“My 1972 Ford 4000 2-WD loader tractor is my go-to machine for almost everything. It runs like a champ and always starts, even in the coldest weather. It’s easy to fix, and parts for it are readily available.
“I’ve had three Tecumseh engines fail in the last two years. These engines seem especially vulnerable to ethanol gas. I’ve had better luck with Honda and Kohler engines, as well as Briggs & Strattons.”
Ford 4000 52 hp tractor
1 Best Buy0 Worst Buys“My 2004 Toyota Matrix all-wheel drive is an excellent vehicle. No problems.
“The Ford 4000 52 hp tractor I bought used 20 years ago still works great. It’s well-geared in all speed ranges.”
Ford 4000 SU tractor
1 Best Buy0 Worst Buys“The Ford 4000 SU tractor I bought in 1964 is still working hard. I use it to load large logs on a Hud-Son sawmill, which is also a best buy. I bought the sawmill after a bad ice storm in 1998 and planned to sell it after cleaning up my woodlot. But I’m still using it.”
Ford 4000 Super Utility tractor equipped
1 Best Buy0 Worst BuysGeorge bought a used 1974 Ford 4000 Super Utility tractor equipped with a 3-cyl. diesel engine in bad shape. He brought it back to life. “When I bought the tractor it was hard to start and would barely run. It had very little power. The air cleaner was almost completely plugged with dirt, and the exhaust was very smoky. After cleaning the air cleaner, changing the oil, and cleaning everything up this tractor now performs like new.”
Ford 42-ton
1 Best Buy0 Worst BuysDelmar Mumma, Alamota, Kan.: “The gears are about right for my kind of farming, the shift on-the-go is great and the hydraulic system can't be beat. [t rides and drives the best of any tractor know and the cab is quiet and dust-free,”’ says Delmar about his “best buy’? Deere 4440 tractor. Delmar's also pleased with his 1984 Ford 42-ton Explorer pickup. “Starts great, rides great and the gas mileage is good."
Ford 4410 industrial loader tractor
1 Best Buy0 Worst Buys“The 1965 Massey Ferguson 65 tractor I bought from my dad is my best buy. It now has 1,950 hours on it and still has the same rear tires.
“My 1972 Ford 4410 industrial loader tractor equipped with a 3-cyl. diesel engine doesn’t use any oil. It’s a good tractor.”
Ford 445 backhoe powered
1 Best Buy0 Worst BuysA 1980 Ford 445 backhoe powered by a diesel engine rates as Russell’s “best buy”. “This is my second Ford backhoe. I previously had a 1968 4400 model equipped with a gas engine. It performed well so when I had an opportunity to upgrade I bought this model. It’s built heavier than the first one and does a great job.
“My 1960 Oliver 770 gas tractor is a best buy. I bought it used in 1972 and had the valves ground once.
“My Ford LGT 14D lawn tractor powered by a 14 hp diesel engine is cheap to operate. The only problem I had was when the seal on the mower deck gearbox went out and ruined the bearings.”
Ford 445C tractor equipped
1 Best Buy0 Worst BuysAlex is the Vo Ag director for his school, where he uses a 1990 Ford 445C tractor equipped with a front-end loader and a model 763 backhoe. “This tractor is just the right size for our students. The torque converter transmission is easy to use and I really like the 4-WD. The backhoe has only a 10-ft. reach but it works perfect for landscaping work. However, this tractor could use a couple of improvements. The engine is extremely noisy, especially when it’s cold. The sound it makes is ear splitting. Also, I wish the engine had more power. It’s like a snail going uphill.”
Ford 450
1 Best Buy0 Worst BuysRobert Harris, Leavenworth, Kan.: “I'm very pleased with the way my 1982 Ford 450 4-row Danish tine cultivator handles under all conditions. It always gets good penetration.”
Ford 450 4-WD flatbed truck equipped
0 Best Buys1 Worst Buy“My 2006 Load Trail dump trailer will dump a big load of shavings on battery power (Load Trail, Inc., Sumner, Texas ph 903 784-8719; www.loadtrail.com). The tailgate can be opened sideways or down, making it easy to use. The pump and battery are mounted on front with a remote control. It has many thoughtful little features.
“My 2003 Ford 450 4-WD flatbed truck equipped with a diesel engine is my worst buy. It had constant problems with the computer and electronic fuel injectors. The dealer fixed them at no cost until the warranty ran out, and then we had to pay. But the delays were usually a week or longer, and there were about 15 of these delays. We’ve probably spent $30,000 on repairs on this vehicle.”
Ford 4610 2WD 52 hp tractor
0 Best Buys1 Worst BuyDonald Hartman, Brutus, Mich.: Donald says his Dodge Power Ram 250 4WD pickup equipped with a Cummins diesel engine is a “best buy”. “It has lots of power, gets a litle over 20 mph, and is fun to drive.” On the negative side, “My Ford 4610 2WD 52 hp tractor has good power and drives nice, but is so light it won't pull as much as my 30-year-old Fordson diesel tractor which has only 42 hp. I sold it after about 6 months.”
Ford 4610 52 hp tractor
1 Best Buy0 Worst BuysEarl bought a used 1984 Ford 4610 52 hp. tractor with about 7,300 hrs. on it. “I use this tractor for everything on our 160-acre farm. It now has about 11,500 hrs. on it, and the only major repair was for a new clutch.”
Ford 4630 front-wheel assist tractor
1 Best Buy0 Worst Buys“I use my 1989 Ford 4630 front-wheel assist tractor to feed round bales to our livestock all winter. It has never missed a day of work.”
Ford 4-WD 1/2ton standard pickup
0 Best Buys1 Worst BuyRay Oranchuk, Tomahawk, Alberta: “My worst buy is my 1986 Ford 4-WD 1/2ton standard pickup. Ithas had wiper, clutch, andaxle problems. The firewall movesabout 3 in, every time I depress the clutch to shift gears. I had to replace the clutch at about 40,000 miles. The rear axle was replaced at 45,000 miles - wheel bearings wore out and chipped the axles, It steers like a rabbit on gravel roads.”
Ford 4-WD 4610 tractor
1 Best Buy0 Worst Buys“My 1987 Ford 4-WD 4610 tractor has a lot of power and a comfortable cab.
“My 1965 Ford 3000 equipped with a diesel engine is a great tractor. It has plenty of power, is fuel efficient, and just keeps thundering away. In my opinion, it’s the best tractor ever made - bar none.”
Ford 4-WD Escape sports utility vehicle
1 Best Buy0 Worst Buys“My Honda powered walk-behind mower makes perfect cuts all the time and always starts on the ¿ rst pull. It’s equipped with the Quadra Cut system that leaves my lawn looking great.
“The ride and handling on my 2011 Ford 4-WD Escape sports utility vehicle is fantastic. This vehicle is neither too small nor too big but just the right size, and it’s always a pleasure to drive. A great vehicle.”
Ford 4-WD XLT Lariat pickup
1 Best Buy0 Worst BuysCalvin Voigt, Forest City, Iowa: “My “best buy’ 1989 Ford 4-WD XLT Lariat pickup is a pleasure to drive. Starts easy in cold weather, handles well, runs quiet, and uses virtually no oil. My only complaint is the location of the electric door locks. It's too easy to accidentally lock yourself out of the pickup.”
Ford 4-WP
1 Best Buy0 Worst BuysLee Folland, Halma, Minn.: “My 1986 Ford 4-WP 150 pickup has been a joy to own. Not one iota of trouble.” Lee also likes his 1980 Ford TW20 tractor. “It’s a gem - going on 5,000 hours.”
Ford 500 all-wheel-drive car equipped
1 Best Buy0 Worst Buys“My best buy is my 2005 Ford 500 all-wheel-drive car equipped with Yokahoma ice tires and a CVT transmission. I use this car to drive 38 miles to work. It works great in snow, has a lot of power, and is easy on fuel.”
Ford 5600 4WD
1 Best Buy0 Worst BuysJeff Jones, Tivoli, N.Y.: Jeff's happy with his Pequa 816 bale racks equipped with feeder bottoms. "We previously owned three of these bale racks and last spring we boughta fourth one. They're well made and easy to use. We especially like the folddown side and front platforms which make it casy to load the conveyor. We also use them in winter to feed cows. We cut the strings off bales as we load them onto the conveyor and fill the racks with loose hay. “My DuAl 215 quick-tach front-end loader is a best buy. It's a super piece of machinery. It was the only loader out of about ten different brands that compared that would fit my tractor - a Ford 5600 4WD. The loader is well made and built strong. I can put it on or take it off in only a couple minutes."
Ford 5610 4-WD tractor
1 Best Buy0 Worst BuysA Kubota 8450 4-WD tractor equipped with a 12-speed transmission rates as Harold’s “best buy”. “I’m surprised at how easily it starts. I do wish there was a little less difference in speed between the transmission’s high and low ranges. This tractor is easy on fuel.
“My 1985 Ford 5610 4-WD tractor has only about 2,100 hours on it but has a noisy rear end and the front-end shimmies badly.”
Ford 5610 II tractor equipped
1 Best Buy0 Worst Buys“My 2000 Deere 425 garden tractor is my best buy. I owned a smaller Deere garden tractor for 10 years before I bought this model. It still has the same great quality.”
“My 1993 Ford 5610 II tractor equipped with wide rear tires and an extra flow hydraulic pump is a best buy.
“My Sears Craftsman high wheel trimmer is my worst buy. The problem is that it leaks oil. I should’ve known better because I had previously owned a Sears riding mower which needed repairs almost every week. However, when my DR trimmer finally wore out I decided to try Sears one more time, which was a mistake.”
Ford 5610 Series II
1 Best Buy0 Worst BuysThomas has two best buy tractors. One is a 1989 Ford 5610 Series II with a Bush Hog quick-attach loader. The other is a 1998 New Holland 5610S with a quick-attach loader. “Both tractors are easy to operate and have done every job I’ve wanted to do.”
Ford 6000
0 Best Buys1 Worst BuyFalls, Mich.: ‘Does anyone know how to put a manual transmission in a 1963 Ford 6000 tractor?’ asks Joseph, who says the tractor — which he bought used — is his “worst buy”. “The Select-O-Speed transmission has a centrifugal clutch that continually has problems, rattling and then falling apart. When I mentioned the problem to my dealer he threw up his arms and said he doesn’t work on that particular model anymore because of all the problems. On later models Ford offered an optional manual clutch for the tractor and I'd like to find a way to install one on this tractor. Can anyone help?”
Ford 630
1 Best Buy0 Worst BuysLawrence Dool, Thorsby, Alb.: "IT bought my 1968 Ford 630 combine in 1980. It'd been parked for about 7 years when I bought it. All it needed was a fuel pump and a battery and it took right off. I've used it for 6 years with no additional repairs. With its 50-in, cylinder and Melroe pick-up, I don't think there's another combine that can compete with it capacity wise.” He nominates his Sears Craftsman electronic 3/8-in. drill as "worst buy". "The automatic chuck doesn't work properly, the switch fell out several times, it powers out and the variable speed goes up and down on it. In other words, it's pure junk. You'd expect better service for a $139 drill, especially since my $30 Black & Decker that's 17 yrs. old outperforms it by a long shot."
Ford 640 tractor
1 Best Buy0 Worst BuysDavid’s the satis¿ ed owner of a 1956 Ford 640 tractor. “This tractor does it all, from pulling tree tops out of the woods to plowing snow and doing garden work. One time I even used it to pull a UPS truck out of a ditch. It has required only routine maintenance.”
Ford 641 tractor
1 Best Buy0 Worst Buys“I bought a used Ford 641 tractor in non-running condition for $1,500. I also bought a used Ford 8N tractor for $1,000. Once I got it running, I like the 641 better because it has a live 3-pt. hitch. The 3-pt.’s lower lift arms are set low, making it easy to bush hog under trees, and the tractor is real stable on hills. Two years ago we got slammed with 26 in. of snow, and by using a tilt angle blade I was able to do enough snowplowing work to pay for both tractors.”
Ford 655C backhoe
1 Best Buy0 Worst Buys“Our 1990 Ford 655C backhoe has a lot of power. When a 4-lane highway went through the middle of our farm, we used it to help move five houses, a barn, and five garages. We also use it to dig foundations, ditches, sewer lines, etc. It has had a couple of problems. The plastic window knobs and heater adjustment dials broke off soon after we bought it. Also, the seat cushion covers deteriorated and tore.”
Ford 660 tractor
1 Best Buy0 Worst Buys“It’s the best pickup I’ve ever owned,” says Cleveland about his 2009 Ford F-250 Super Duty model equipped with a 5.4-liter engine.
“My 1957 Ford 660 tractor still starts faithfully. I use it to rake hay with a Ford 3-pt. mounted rake.”
Ford 661
1 Best Buy0 Worst Buys“Of all the tractors we’ve ever had on our farm, the handiest and most dependable has been our 1960 Ford 661,” says Dick. “It’s easy to operate, handle and service and is equipped with a two-stage clutch and power steering.”
Dick’s also impressed with his 1990 Deere 175 riding mower. “We’ve mowed hundreds of acres over the years and basic maintenance has kept it running like new. The motor and transmission have been completely trouble-free.”
He also liked the deal he got from Harbor Freight after he broke the handle on a new ball peen hammer the first time he used it. “The company not only replaced the broken hammer, but sent me their entire five-piece hammer set free-of-charge.”
Ford 6-cyl
1 Best Buy0 Worst BuysG. William Niles, Seneca Castle, New York: "My 4-WD_ 1985 Ford 6-cyl F-150 pickup is an oil hog. Takes a quart every 550 to 650 miles and gas mileage has never risen above 12.5 mpg. It's a fine riding truck, but these problems have never been resolved. At present I'm in the process of a lawsuit."
Ford 6-cylinder pickup traded
1 Best Buy0 Worst BuysRichard Cain, Belle Mead, N..J.: “My 1989 Chevrolet pickup equipped with a 350cu. in. engine and 5-speed transmission is a best buy. It has plenty of power to pull my 16-ft. trailer. It has good fuel economy, much better than the 1986 Ford 6-cylinder pickup traded in.”
Ford 700
1 Best Buy0 Worst BuysGary Gerdes, Glenwood, Minn.: “My 1989 Deere 265 lawn mower has over 300 hours and is still going. I've never had any trouble with it.” Gary’s 1989 Ford 700 series truck is a “worst buy”. “It has only 20,000 miles on it, but has had lots of problems. At 3,000 miles the water pump wentout. I had to wait about six months before a new one was installed. The carburetor and the exhaust system are bad and the radiator leaked. The air pump is also bad. I ordered a new one three months ago, but I still haven't got it.”
Ford 7108 loader be
1 Best Buy0 Worst Buys“I’m 54 years old and this is the first tractor I ever bought new. It’s great,” says Paul about his 1995 Ford-New Holland 1720 tractor. “It starts, runs and shifts fine. The four-wheel drive works great in mud and snow and it’s easy on fuel and easy to service.”
On the other hand, he’s unhappy about one aspect of the tractor and the Ford 7108 loader be bought to use with it. “The tractor’s hydraulic system has no power. The dealer says that’s just the way OSHA wants it. Also, all the welds on the loader frame broke during light snow removal, and the tractor had less than 200 hours on it.”
Ford 7210 tractor equipped
0 Best Buys1 Worst BuyLinden likes the handling and fuel economy of his 1989 Ford 4610 tractor.
“However, when making a left turn, the left front tire rubs on the steering control rod which comes from the steering wheel area to the front of the tractor. Seems like a glitch that could have been avoided by some common sense engineering.”
He’s also generally satisfied with his 1989 Ford 7210 tractor equipped with a bucket and forklift. “The operator could have a better view of the forks. Otherwise, it works fine.”
Ford 7.3 L F-250
1 Best Buy0 Worst Buys“My 2004 Toyota Highlander has 252,000 miles and gets 18 to 30 mpg. I haven’t had any problems with it.
“My 15-year-old Case D33 2-WD tractor has never caused any problems in over 800 hrs.
“I purchased my 1996 Ford 7.3 L F-250 used with 77,000 miles. There have been no mechanical issues in 252,000 miles.”
Ford 7.3-liter diesel pickup
1 Best Buy0 Worst BuysMary Ann Ratti, Hayward, Calif.: “Our best buy 1990 Ford 7.3-liter diesel pickup has 208,000 miles. We put on 200 miles a day going back and forth to our ranch. It gets 18 to 20 mpg. The clutch has never been touched. The first setof Michelin tires lasted 103,532 miles and the second set now has 105,000 miles.”
Ford 755
1 Best Buy0 Worst BuysLouis H. Ulizio Jr., Wallingford, Connecticut: A Ford 755 backhoe/loader combination is his “best buy". "Has plenty of power when the bucket is loaded. Controls on the backhoe feather well, thus preventing the boom from bouncing. The hoe and loader cylinders are larger than competitive models and it had the best balance of all machines we tested." Walter. C. Futral Jr., Griffin, Georgia: "Our Gallagher/Snell temporary power fencing system with E-12 12-V battery fence charger, poly posts and poly wire and reel is best buy. It's an expensive system but well worth it for temporary fencing. The high voltage shock put out by the energizer tums cattle where conventional chargers won't. The poly wire is highly visible, quick to put up and easy to roll up in the portable reel. The poly posts are also easy to install and remove."
Ford 7600
1 Best Buy0 Worst BuysThomas Schmidl, Live Oak, Calif.: Thomas likes his Ford 7600 and 6610 tracia 48 rst Buys us page) tors. “I buy Ford tractors because they don't have any repair bills. That saves me a lot of money.”
Ford 7610 4-WD tractor equipped
1 Best Buy0 Worst BuysJames Makowski, Freedom, N.Y.: “It has plenty of power and is versatile. We use it every day,” says James, pleased with his 1990 Ford 7610 4-WD tractor equipped with a 7410 loader, “It has 500 hours with no problems. “Our 1979 Ford 7700 tractor has 4,000 hours and still works as good as 1 new.”
Ford 7710 2-WD tractor eight
1 Best Buy0 Worst Buys“I bought my 1982 Ford 7710 2-WD tractor eight years ago with 2,900 hours on it. Now it has 4,500 hours and has never needed any major repairs. It runs efficiently and has a quiet and comfortable cab. The air and heater always work, and it’s easy to drive. My daughter started driving it when she was 13 years old.
“My 1995 Murray lawn mower equipped with a 3 1/2 hp Briggs and Stratton engine is my worst buy. It never started without having to be primed and cranked a dozen times. We finally bought another mower equipped with a 5 hp Honda motor, and it usually starts on the first pull.”
Ford 7710 4WD tractor
1 Best Buy0 Worst BuysGlen Peterson, Marshfield, Wis.: Glen's the happy owner of a 1989 Ford 7710 4WD tractor, “It was reasonably priced compared to other brands, I’m very pleased with its power, maneuverablity, and case of handling. Most service points are very accessable,”
Ford 7840 front wheel assist
0 Best Buys1 Worst Buy“My 1995 Honda Fourtrax 4-wheeler ATV just keeps on running without requiring any maintenance. “My 1995 Ford 7840 front wheel assist tractor equipped with a 7413 front-end loader is my worst buy. The loader has been a headache since day one. All the hydraulic hoses ruptured and had to be replaced. The joystick and control valves never work properly, and the transmission isn’t designed to work in our cold winters. There have been numerous other problems. It’s poorly designed and is a $90,000 piece of junk. The only good thing is that dealer has been great.”
Ford 8
1 Best Buy0 Worst BuysBill Fischer, Fremont, Wis.: Bill's unhappy with his Same tractor. “Too many small problems. Seems there is always something wrong with it. Seals and manifold gaskets leak, the air conditioner, heater, and pto all failed, and various switches and controls quit working. Parts are very expensive. We do, however, love the 4-WD option. Dealer has been very helpful.” On the plus side, Bill was so pleased with H & S XL forage boxes that he became a dealer for the company. “It's well-constructed, operates very smoothly, and the H & S Co, people stand behind their products 100%.” Marvin Holsing, Cresbard, S. Dak.: “Although nearly all of our equipment is Deere and I’m well pleased with it, I'm disappointed with my 850 Deere tractor that’s made in Japan. The salesman said it would do anything that our Ford 8 N that we traded to him would. The tractor runs nice but the rear wheels are too small and the hydraulic system is inferior to the Ford's. Plus, this tractor will not pull the cultivator we always use to cultivate trees." Marvin's happy, though, with his 1979 Dodge pickup with 6-cyl. engine and 4-speed transmission. “We haul an 8% ft. overhead camper on it and always get about 15 mpg on trips. We also have a 1982 Dodge Rampage pickup that gets better than 30 mpg. It hasn't given any trouble and is fun to drive. With its front wheel drive, it's good in snow and ice.”
Ford 800 tractor
0 Best Buys1 Worst Buy“One of the power steering hoses broke on my 1958 Ford 800 tractor. The dealer told me replacement hoses were no longer available, but that I could have one made up at a cost of $511. Instead, I went to a NAPA auto store and they fixed me up with two new hoses for $56.”
Ford 801
0 Best Buys1 Worst BuyLeon Szmidt, Pine Island, N.Y.: He says his Power Lite PLS chain saw is a “best buy”. “I use the saw to cut telephone poles into rails, I wore out six chains but the saw kept going.” Leon also likes his Ford 801 tractor. “Starts good in the coldest weather.” His “worst buy” is a Stihl 031 AV chain saw. “Aftera month of use the points burned out. The garage installed new points but they lasted only four months. I tried to put new points in myself - what a job. Never again!”
Ford 820 tractor equipped
1 Best Buy0 Worst Buys“I like my 1957 Ford 820 tractor equipped with a front-end loader and backhoe. It’s an industrial-built machine that doesn’t use any oil and starts great. I bought it primarily to haul firewood and cut 5 or 6 cords of wood a year. The backhoe’s weight helps balance any heavy loads on the loader bucket.”
Ford 8210
1 Best Buy0 Worst BuysTerry Coulas, Cobden, Ont.: “Our 1985 Ford 8210 4-WD tractor is a pleastre to operate. Cab is quiet and ’ tractor’s easier on fuel than the 8600 Ford that we had. Uses 1-gal. per hour pulling a 20-ft. disc harrow and a 21-ft. harrow, ‘We also like our 8030 Frey quick-attach loader with quick-attach bucket. We can change it from our 85 hp. 2-WD tractor to our 72-hp, 4-WD in less than 5 minutes. Can change buckets in less than 2 minutes.”
Ford 8240
1 Best Buy0 Worst BuysJon Holmes, Graham, Mo.: “My 1994 Ford 8240 tractor equipped with front wheel assist is a best buy, Its well built and is easy on fuel.”
Ford 8340 tractor
1 Best Buy0 Worst Buys“My 1994 Ford 8340 tractor has a lot of power and a powershift transmission that works smooth and easy. This tractor is so nice to drive that I use it for both big and small jobs.”
Ford 8530
1 Best Buy0 Worst BuysGeorge Wagner, Perry, Okla.: “My 1992 Ford 8530 tractor is fuel efficient and easy to handle. I can drive it all day without having to refuel. I like the cab. It’s quietand well-designed with good visibility. I also like the air-ride seat and lights. It’s easy to work on and the fuel tank is easy to fill.”
Ford 860
1 Best Buy0 Worst Buys“I’ve had a few standout best buys in my 85 years. I used my 1969 Deere 4020 diesel for 46 years. It never needed motor work; only a clutch and the hydraulic pump fixed.
“My 1955 Ford 860 was used for 60 years with no major problems. It was a safe tractor for my wife and daughters to operate. It had standing room for passengers and was easy to get on and off.
“Finally, my 1999 Chevy S-10 had no major problems in 21 years. With care, it pulled 100-bushel gravity boxes to town.”
Ford 8600
1 Best Buy0 Worst BuysJon Peters, Emmett, Mich.: “We bought it nine years ago and the only problem we ever had was with a failed shifting fork. After 10,000 hrs. of use, it’s never had a wrench on the engine,” says Jon, pleased with the “After 10,000 hrs., it’s never had a wrench on the engine.” performance of his Ford 8600 tractor. We also have a 1978 Ford 9700 that has provided 7,000 hrs. of similar good performance.” On the negative side, Jon had trouble with a Massey Ferguson 285 tractor bought in 1976. “We owned it for 2,200 hrs, and had to replace the water pump, hydraulic pump, fuel pump, head gasket, battery, starter, four spindles on the front end, and a cracked oil pan. We also rebuilt the engine. Dealer service was fair but the tractor was poorly put together.”
Ford 8630 4-WD tractor
1 Best Buy0 Worst BuysHe’s the owner of a “best buy” 1993 Ford 8630 4-WD tractor. “The powershift transmission works good and the engine has a lot of power but it could be more fuel efficient. It has 650 hours on it. “My 1990 Kubota 7030 4-WD front wheel assist tractor equipped with a Massey-Ferguson industrial front-end loader is a best buy. It has over 2,500 hours on it with no problems and starts easy in cold weather. My only complaint is that the front tires wear out too fast. The only time I use the front wheel assist is to push silage up into our bunker silo.” Robert D. Anderson, Thorndale,
Ford 8670 front wheel assist
1 Best Buy0 Worst BuysJerry likes his Sunflower 1232 32-ft. disk. “The company makes good quality farm machinery. We liked the 1232 disk so much that we bought a used 1433 model. No problems after three years. “We also like our 1994 Ford 8670 front wheel assist “super steer” tractor. It has more than 1,000 hours on it with no major problems.”
Ford 871 Selecto Speed tractor
1 Best Buy0 Worst Buys“The 1962 Ford 871 Selecto Speed tractor I bought used 15 years ago is my best buy. I had to fix the head gasket, but there have been no problems since. I use it to bush hog and to scrape driveways. I love this tractor and would buy another one.”
Ford 8830
1 Best Buy0 Worst BuysEric Angus, Kersey LDS Farms, La Salle, Colo.: Eric bought his “best buy” 1991 Ford 8830 front wheel assist tractor to replace a 1989 Deere 4455, “It’s had very few problems and the powershift transmission is the best on the market. It has a lot of power and a comfortable cab. It’s also fuel efficient. I liked it so well I also bought a 1992 Ford 8730 and a 1993 Ford 7740, Both tractors have front wheel assist.” Sam Scarlett, New Market, Tenn.: Sam nominates his 1992 Henke 2309 TMR mixer-wagon as his “best buy”. “I like it because we can mix more long hay with it, The wagon we had before could handle only about 2 Ibs. of hay per cow, but this one can handle 5 or more Ibs. “My Ford F-350 dually diesel pickup is my worst buy. The Firestone tires in front were “out of round’ and my dealer couldn't find out what was wrong. We took it to a private company that found the problem and fixed it. The dealer paid for it.”
Ford 8870 tractor
1 Best Buy0 Worst Buys“Our 1996 Ford 8870 tractor performs well. It’s a best buy.”
Ford 9000
1 Best Buy0 Worst Buys“My three best purchases are a Deere 4240, an IH 1256, and a Ford 9000. It’s…”
Ford 901 tractors
1 Best Buy0 Worst Buys“My best buys of all time are my 1956 Allis-Chalmers WD45 and 1962 Ford 901 tractors. The Ford model is equipped with a diesel engine. I bought both tractors used and they’ve been very reliable.
“My 1995 Ford F-250 pickup equipped with a Power Stroke diesel engine is a best buy.
“MyDeere 332 lawn tractor equipped with a 50-in. mower has about 600 hours on it and is also a best buy.”
Ford 907 flail finish mower
1 Best Buy0 Worst BuysFaced with the chore of mowing about six acres of grass around her house and buildings, Marge bought a 3-pt., pto-driven Ford 907 flail finish mower. “We can use any Cat. I or II tractor to pull it, and it has only one drive belt to maintain. I’ll never buy any other kind of mower.”
Ford 941 diesel tractor
1 Best Buy0 Worst BuysAt 93 years old, John nominates the Ford 941 diesel tractor he bought new in 1955 as his “best buy”. It’s equipped with a 4-speed transmission with over/under drive, a single front wheel, and wide front axle. “We used this tractor for 45 years to plant all the corn and about half the soybeans on our 454-acre farm. It won the state tractor pulling contest in 1962 and won many other pulling contests after that. We still use this tractor for mowing and snow plowing. The head has never been off the engine. The fuel injector pump was serviced once.”
Ford 946 4-WD tractor
0 Best Buys1 Worst BuyTim Boucher, Crookston, Minn.: Tim’s the unhappy owner of a Ford 946 4-WD tractor. “The compensator valve stuck on the hydraulic system and ruined four hydraulic cylinders on my disk. Each cylinder cost $290. The company says it won't pay for the cylinders because they're not part of the tractor, but the tractor caused the cylinders to fail.”
Ford 960 tractor
1 Best Buy0 Worst BuysJohn nominates his Ford 960 tractor as a best buy. “Even at its age, it’s wonderful to mow hay with.
“Buying an electric pole saw has turned out to be one of my better buys. I can trim tree branches without balancing on a ladder, so it’s safer and I get more trimming done. My spouse is also more willing to use it.”
Ford 981
1 Best Buy0 Worst BuysEldon Miller, Adrian, Mich.: “My best buy of all time is my 1959 Ford 981 Select O Matic tractor which I bought used. I’ve never had any trouble with it. made two snow blades for it which the tractor handles with ease. It’s an easy tractor to service. “My worst buy is my 1993 Mighty Mig Mig-Mate wire welder. I can’t make a continuous weld with it or make spot welds without ‘bird nesting’ the wire. The problem is that the wire always feeds out at the same rate regardless of the heat setting. As a result spend more time unraveling the wire than I do welding. My next welder will be a Century or Lincoln.”
Ford Aerostar extended length
1 Best Buy0 Worst Buys“My 1996 Ford Aerostar extended length, 4-WD van is my best buy. Even when I’m driving it in snow or on rough roads it never spins a wheel. If I fold the seats down I can fit big 4 by 8-ft. sheets of plywood inside it. It has a front and back heater and air conditioning and is a very practical all-around van. Over the years I’ve owned three Aerostar models. I wish the company would start making them again.”
Ford Aspire car
1 Best Buy0 Worst Buys“I bought a used 1995 Ford Aspire car in 2000 with 57,000 miles on it. I drive it every day. It now has about 155,000 miles. I’ve replaced the front brakes and one set of spark plugs. The battery is more than seven years old. It gets 45 to 50 mpg during the summer and never less than 42 mpg during the winter, and doesn’t use a drop of oil. I wish they still made this car.”
Ford Bronco equipped
1 Best Buy0 Worst Buys“It has more than 300,000 miles on it but is still going strong,” says Louis, happy with his 1969 Ford Bronco equipped with a 302 cu. in. engine and heavy duty suspension.
“My Miller 172 Mig welder is my worst buy. The wire feed on it never worked right, even after I made several trips to the dealer. I finally junked it out and bought another brand, which works fine.”
Ford Bronco Sport Big bend
1 Best Buy0 Worst Buys“In May 2023, I bought a low-mileage 2021 Ford Bronco Sport Big Bend. It drives nicely. It’s very snappy for only a 1.5-liter turbo and has made over 33 mpg. I’m very happy with it.”
Ford Chatou full-size van
1 Best Buy0 Worst Buys“Our 1992 Ford Chatou full-size van, which we bought used in 1998 with about 68,000 miles on it, is our best buy. We use it every summer on vacation to pull our pop-up camper as well as to haul a ZTR mower home from Arkansas. We also use it to transport feed and farm machinery, etc. Our biggest expense was to replace a rusted-out oil pan. After 15 years this van is still very tight, with no rattles. We just sold it to downsize to a minivan. The van had about 214,000 miles on it.
“We used our 1981 Ford F-150 pickup hard, but even so it lasted 20 years until we bought another F-150 to replace it.”
Ford Crown Victoriahasover 235 000 miles
1 Best Buy0 Worst BuysJohn A. Cass, Bonaparte, Iowa: John's 1983 Ford Crown Victoriahasover 235,000 miles and is a “best buy”. “The heads, transmission, and differential have never been taken apart. I change oil every 3,000 miles and have never had to add any oil. “My Homelite ST 155 string trimmer is my worst buy. It still has the original spool of string so Ihaven’t used itthat much, Ithas been in the shop twice, once under warranty. The other time I had to pay $25.00. It doesn't work now because the fuel tank leaks.”
Ford Custom F-350 2-ton truck equipped
1 Best Buy0 Worst Buys
“My husband Tony and I love our 1972 Ford Custom F-350 2-ton truck equipped with a 360 hp. gas engine and 4-speed manual transmission.”
Read the whole story →Ford E-150 van
1 Best Buy0 Worst BuysVernon Ellickson, Decorah, Iowa: Vernon says his 1988 Ford E-150 van gets over 20 mpg when loaded and is a “best buy”. “It has gone more than 30,000 miles with no problems.”
Ford E-350 Econoline vans
0 Best Buys1 Worst Buy“I’ve owned Bobcat skid steer loaders for more than 20 years and they seem to get better with each year. My 1995 853 model has no bad habits and is a real money maker. It’s available with a wide variety of attachments which allows me to do a lot of different jobs fast. “I haven’t had any problems with my Deere 450G dozer in almost 10 years.” On the “worst buy” side, he lists his two Ford E-350 Econoline vans. “They’re both equipped with 7.3-liter diesel engines and automatic transmissions. They don’t start well and one of them has gone through two transmissions. Also, they get poor mileage and the brakes wear out prematurely.”
Ford Ecoboost F-150 pickup
1 Best Buy0 Worst Buys“My 1983 Stihl 028AV chainsaw has worn out 2 bars and 1 or 2 pull cords and starter springs over the years, but is still going strong.
“I was happy enough with my 2011 Ford Ecoboost F-150 pickup that I upgraded to a 2019 model with a bigger fuel tank and a step-up tailgate. It gets about 17 mpg in town and 22 mpg on the highway. The new technology on this pickup is fantastic.”
Ford Edge Limited
1 Best Buy0 Worst Buys“It’s the most comfortable car I’ve ever driven,” says Kenneth about his 2011 Ford Edge Limited. “I enjoy everything about this car. Driving it is like sitting in a big easy chair.”
Ford Escape 4-WD 4-door crossover
1 Best Buy0 Worst Buys“I like my 2013 Ford Escape 4-WD, 4-door crossover vehicle. It’s equipped with an EcoBoost 4-cyl. engine that has a lot of power and gets 26 to 27 mpg. It’s easy to get in and out of and is a quiet ride.
“My 2008 Ford Ranger pickup has a powerful 4.0-liter engine and handles well.”
Ford Escort LX equipped
1 Best Buy0 Worst Buys“It’s the best car I’ve ever owned,” says Ned about his 1998 Ford Escort LX equipped with a 2-liter engine and 5-speed manual transmission. “This car has more than 386,000 miles and consistently gets 40 mpg. The tires on it have averaged 115,000 miles. The water pump lasted 375,000 miles. It still has the original clutch and exhaust system. There’s no body rust and only minor dents from hitting two deer, one of which was a 6-point buck that flipped onto the roof. The only parts that have failed were the harmonic balancer and the alternator. I change the oil at 8,000-mile intervals. I expect this car to make it to 500,000 miles.”
Ford Expedition SUV equipped
0 Best Buys1 Worst BuyMichael’s disappointed with his 2005 Ford Expedition SUV equipped with a 5.4-liter engine. “The center seat/armrest metal broke at the hinge, the rear flashers blow fuses, and water ran into the rear hatch and caused the rear wipers to short out.
“Soon after I bought this vehicle the brake shoes broke, and then at 1,079 miles the engine blew up when a valve embedded inside a piston. On the replacement engine, the spark plugs fouled out constantly and cost $12 apiece to replace and $200 for labor. The fuel injectors malfunctioned and even though there was a company recall on them, they said I had put 15 miles too many on my vehicle so I had to pay. The rig’s 2 catalytic converters went bad and cost $1,000 apiece to replace. Another problem is that water and sand get into the spark plug hole through rubber seals and cause the engine to misfire. This SUV is a $41,000 piece of junk.”
Ford Explorer Sport
1 Best Buy0 Worst Buys“My 2000 Ford Explorer Sport is equipped with a 4.0-liter engine and manual transmission. It has more than 212,000 miles on it but still runs almost as smooth as the day I bought it. I put hard miles on it as I do a lot of city driving, and I also use it as a maintenance vehicle for real estate. I drove this vehicle pulling trailers all across North America. I converted it to run on E85 ethanol fuel blend and drove it on ethanol for about 10,000 miles.
“Certain components would fail over and over again, such as the EGR, the coil packs, and the door locks. They failed before the first 100,000 miles. I would replace the parts, and then I’d have to replace them again after about 10,000 miles. However, once I figured out which were the few bad components and started putting high-end replacement parts in the vehicle, I found this vehicle to be Ford-tough.”
Ford Explorer Sport Trac
0 Best Buys1 Worst Buy“I like my Reddy 50,000 btu multi-fuel portable heater. It delivers heat quickly - just fill it up and plug it in, and you’ve got heat.
“My 2001 Ford Explorer Sport Trac is my worst buy. At 70,000 miles the automatic transmission started to slip whenever I would shift gears. Upon investigation I found the push rods in the transmission are made out of steel and mounted in an aluminum housing, which wears out. I checked on the internet and found the company has known about this problem for some time.
“Our dealer said he’d be happy to sell us another transmission, which costs about $3,000 and has a 3-year, 100,000-mile warranty. However, the first transmission lasted barely 70,000 miles, so what makes them think this one will work any better? If you own a Ford Explorer Sport Trac equipped with a V-6 engine and an automatic transmission with less than 50,000 miles on it, get rid of it now. You’ll be happy you did, because otherwise it’ll cost you in the long run.”
Ford Explorer Sport Truck equipped
1 Best Buy0 Worst Buys“I’m well pleased with my new BadBoy 42-in. riding mower equipped with a Kohler engine.
“My wife and I bought a 2007 Ford Explorer Sport Truck equipped with a 4.6-liter V-8 engine. This year it reached 100,000 miles and the owner’s manual said it was time for new spark plugs. We called the dealer and were told installing new plugs would cost $800. When I asked why, they said the plugs in this engine were known to break when extracted, so they have to use a special extraction tool to remove the plugs and that’s why it costs so much.
“I called the company to complain, but they told me that’s just the way it is and that they had corrected the problem on newer engine models. I asked if there had ever been a recall on my truck, and they said no. So anyone who owns a 2007 Ford equipped with a 4.6-liter engine will have to pay the price. We traded ours in.”
Ford Explorer XLT 4-WD
1 Best Buy0 Worst BuysLaJuana Solomon, Colorado City, Texas: “Ithas 15,000 miles and hasn't been back to the dealer for repairs yet,” says LaJuana about her “best buy” 1991 Ford Explorer XLT 4-WD.
Ford F-100 2-WD pickup
1 Best Buy0 Worst BuysShane nominates his 1977 Ford F-100 2-WD pickup as his “best buy”. “I bought it used 20 years ago, two weeks before my 16th birthday, with about 70,000 miles on it. Now it has more than 244,000 miles. The engine was overhauled at 150,000 miles and the transmission at 170,000 miles. Otherwise it has required only routine maintenance. It’s now on its fifth set of tires, third alternator, fourth battery and third set of brakes.”
Ford F-150 1/2-ton 4-WD pickup
0 Best Buys1 Worst Buy“My 1996Deere 870 tractor is easy to operate and works great for pulling my dolly wheel hay rake. Even when it runs at high rpm’s it’s so quiet that I can almost hear myself think. I also use it to pull wagons, operate an elevator, pull a harrow, and do other small jobs. The company should build these tractors equipped with rubber tracks for use on truck farms. Also, I wish it could be equipped with a mid-mount sicklebar so that I wouldn’t have to constantly look back while mowing. The tractor is easy on fuel, too. Once the engine overheated, but a new thermostat solved that problem. “My Ford F-150 1/2-ton 4-WD pickup is my worst buy. It’s built cheap and is too light in back. It must have been built from old Coca Cola cans. I think Ford and Chevy are competing with each other just to sell pickups to city people, emphasizing the pickup’s looks and so-called fuel economy. When I’m ready to buy another pickup I’ll go with Dodge and their Cummins diesel engine. At least they finally woke up and listened to the needs of farmers, who use pickups as work vehicles.”
Ford F-150 2
1 Best Buy0 Worst Buys“An exceptional machine” is how he describes his 1994 Ford F-150 2 by 4. “It’s given us three years of trouble-free service and its ride is excellent,” he says. “Dealer service has been outstanding. I have a new 1997 on order.”
Ford F-150 2-WD Club cab pickup equipped
1 Best Buy0 Worst Buys“My 2012 Ford F-150 2-WD Club Cab pickup equipped with a V-8 engine rides better and is quieter than any other pickup I’ve owned.”
Ford F-150 4
0 Best Buys1 Worst BuyGeorge Birdsall, Watertown, Conn.: “My 1989 Kubota BL 60€ rotary tiller does a good job of preparing soil and the 3-pt. hitch is easy to hook up. I can adjust tillage depth from 0 to 6 in, by moving the skid shoes up or down, “My 1985 Dodge 4-WD pickup is another best buy. It works well on hilly terrain or in the woods. The 318 cu. in. engine uses almost no oil and has plenty of power. “My 1988 Ford F-150 4 by 4 pickup is a worst buy because the front end won't stay lined up. Ford's warranty is a big joke.”
Ford F-150 4-WD Supercab pickup equipped
1 Best Buy0 Worst Buys“Last August we bought a used 1999 Ford F-150 4-WD Supercab pickup equipped with a 5.4-liter, EFI V-8 engine and an electronic 4-speed automatic transmission with overdrive. It’s a really nice pickup and is fuel efficient, getting about 22 mpg on the highway. Unlike older Ford models, when the transmission goes into overdrive it doesn’t jerk as you go down the road. I’m really proud of this pickup.”
Ford F-150 4x4 SuperCrew
1 Best Buy0 Worst BuysJohnnie’s best buy is a 2020 Ford F-150 4x4 SuperCrew with 10-speed automatic and 3.5 EcoBoost engine. “This truck consistently gets over 20 mpg. It rides and handles well and is very roomy.”
Ford F-150 FX4
1 Best Buy0 Worst Buys“My 2019 Ford F-150 FX4 is a great all-around truck. It pulls anything and is easy on fuel.
“I like buying American-made but it’s sure hard to find anything made here. Saw blades, nuts and bolts, wire fencing, screws, and even nails are all foreign-made. Tools, electrical equipment, welding rods, and household appliances are all junk unless made in the good old USA.”
Ford F-150 Lariat Super cab 4-wd pickup
1 Best Buy0 Worst BuysWilliam nominates his 1997 Ford F-150 Lariat Super Cab 4-WD pickup as his “best buy”. “My pickup has 24,000 miles on it. It rides well and handles nicely. All I’ve done is change oil every 3,000 miles. Maintenance is easy because there’s only one zerk to grease. The third door, which comes standard, is really a welcome addition, making entering and exiting the cab a breeze.”
Ford F-150 Lariat Supercrew pickup
1 Best Buy0 Worst BuysDavid’s impressed with his 2005 Ford F-150 Lariat Supercrew pickup. “Three years, 98,000 miles, and no repairs of any kind. The 5.4-liter engine is by far the smoothest engine I’ve ever owned and has plenty of torque at any rpm’s. The cab is so much quieter than the competition that it’s almost embarrassing. The engineering and quality of this vehicle is outstanding.”
Ford F-150 Limited
1 Best Buy0 Worst Buys“My wife’s Ford F-150 Limited is a best buy. The 450-hp Raptor motor is 10 to 15% more fuel-efficient than the tricked-out F-150 Lariat with EcoBoost that she traded in. We’ve had no issues. It’s really nice and great to drive. It was worth the cost; she loves it.
“Our Kubota RTV-X112D is well-built. It starts and runs well, although not as fast as advertised. We had an aluminum bed liner made for it. It’s about a foot taller in the front than the bed to keep trash from falling between the bed and the cab. We also made it longer than the bed with the tailgate down so it dumps and cleans better.
“Our complaint from day one has been the high-low-reverse control. If we don’t stop on a smooth, level area or jerk it out of gear before stopping, the motor must be shut off to allow the hydro to release to shift to neutral and restart the motor. It’s been started thousands of times. The dealers have not helped. We had planned to trade it for another with air conditioning but were not assured that the issue had been eliminated.
“We recently purchased a new JCT 4-in-1 skid steer bucket at a local consignment auction. The lip wasn’t evenly closed. When we tried to mount it, we discovered the QT brackets were not made right, requiring the blue wrench, grinder and time. Once mounted, all the hydraulic lines leaked and had to be tightened. But the lip would only open about 1/4 to 1/3 of normal travel, making it worthless for what it was purchased for. We discovered the hydraulic clam cylinders were about 3 in. too long for the application. We could only reach an answering machine at the California builder’s number. As the cylinder eyes were threaded into the shaves, we had them shortened and rethreaded. It now works okay, but it doesn’t close evenly. I should’ve paid more and had local service.”
Ford F-150 STX pickup equipped
1 Best Buy0 Worst Buys“We use our 2013 Ford F-150 STX pickup equipped with a 5-liter engine to pull our pontoon boat, 30-ft. travel trailer, and 16-ft. hay wagon. It’s a best buy.
“We owned 1982, 1986, and 1990 Chevrolet 3/4-ton pickups, and the engine on each one went bad with under 50,000 miles. These engines couldn’t take the abuse of farm work.”
Ford F-150 SuperCab 2-WD pickup
1 Best Buy0 Worst Buys“I’m well pleased with my 2017 Ford F-150 SuperCab 2-WD pickup. It has a lot of power and a smooth ride. With 2-WD it’s easy to get stuck in mud, but I couldn’t justify the cost of a 4-WD. My previous pickup was a 2004 Ford F-150 SuperCab. It had about 160,000 miles on it when the air conditioner clutch gave out. That was the only problem I ever had with it, and I hope my 2017 model performs as well. This is the fifth F-150 I’ve owned, and all but two of them were SuperCabs.”
Ford F-150 Super Crew Platinum pickup
1 Best Buy0 Worst Buys
“I’ve driven Ford pickups for 25 years and every one of the 6 models I’ve owned has improved on the previous one.”
Read the whole story →Ford F-150 XL 4-WD pickup
1 Best Buy0 Worst Buys“I bought my 2011 Ford F-150 XL 4-WD pickup used with about 4,300 miles on it. It’s equipped with a 3.7-liter, V-6 engine and automatic transmission. This is a no-frills model, which I really like. It has a manual transfer case and roll-up windows, with no extra stuff to worry about or a dash full of knobs and switches to break. It gets 15 to 16 mpg in town and 23 to 24 mpg on the highway, which I think is great for a 4-WD pickup.”
On the “worst buy” side, he lists his Rage II Evolution chop saw equipped with a carbide-tipped blade instead of an abrasive wheel. “When I used it on 1/8-in. thick angle iron the blade only lasted for 12 to 15 cuts. I returned it and bought a new abrasive saw.”
Ford F-150 XLT Super cab 4-wd pickup
1 Best Buy0 Worst BuysDaniel R. Brunkow, Monroe, Wis.: Daniel's had good luck with his 1993 Ford F-150 XLT Super Cab 4-WD pickup. “I like its style. It rides comfortably, has plenty of power, good traction, and is easy on fuel. “T’ve had few problems with my 1989 Ford F-150 4-WD pickup in over 60,000 miles, I'm well-satisfied with it. “My 1986 Ford Ranger is a worst buy. ‘The transmission burned up at 26,000 miles.”
Ford F-250 3/4-ton4-WD pickup equipped
0 Best Buys1 Worst BuyTed Ross, Forest, La: Ted's ‘worst buy” ishis 1989 Ford F-250 3/4-ton4-WD pickup equipped with a diesel engine. “The speedometer went out at under 12,000 miles and was repaired by a dealer, It wasn’t long before it went out again. I was told by another dealer's mechanic that the speedometer had an engineering defect, Two rear wheel seals also went out. The transfer case was removed and repaired twice (at under 12,000 miles), the fuel gauges failed, and the seat belt has never retracted properly. The 5-speed manual transmission became very hard to shift and cost $886 to repair. The transmission repair happened well within the 60,000 mile, 6-year power train warranty, but the company wouldn't cover it because the speedometer had failed and showed the incorrect mileage. The company refused to pay for the transmission repair even though other Ford dealerships had failed to repair the speedometer. “Perhaps U.S. truck makers will improve the quality of their trucks when Nissan, Mazda, etc., build comparable sized trucks for sale in this country. However, despite the shoddy workmanship and the company’s failure to honor the warranty, this is a ( ( powerful, rugged farm truck.”
Ford F-250 4-WD 3/4-ton pickup equipped
0 Best Buys1 Worst Buy“My 2004 Deere 2210 4-WD compact tractor equipped with a 23 hp, 3-cyl. diesel engine is a real workhorse. I bought it equipped with a quick-tach front-end loader and a quick-tach bucket, which comes as standard equipment. All the control levers for it are well placed. This tractor turns as sharp as a garden tractor and will go almost anywhere that a garden tractor will go.”
He says his 1999 Ford F-250 4-WD 3/4-ton pickup equipped with a Power Stroke diesel engine and automatic transmission is his “worst buy”. “It has more than 112,000 miles on it but is a poor excuse for a 3/4-ton truck. I previously owned 1995 and 1996 models equipped with Power Stroke engines and they were built much better. This model has far less power and less load carrying capacity. The only improvement it offers is in ride quality, but it comes at the expense of load capacity.”
Ford F-250 4-WD SuperCab pickup
1 Best Buy0 Worst BuysDean Wolfe, Howard, Ohio: A 1992 Ford F-250 4-WD SuperCab pickup rates as Dean’s “best buy”. “This is our fourth F250 and they've all been excellent vehicles. “My New Holland 311 baler is a big disappointment. It has made less than 5,000 bales but already we’ve had to replace knotters, and several other parts.”
Ford F-250 4-wheel-drive pickup
0 Best Buys1 Worst Buy“My worst buy ever was a new 1984 Ford F-250 4-wheel-drive pickup that I bought not knowing that it was the first year of computerized carb and ignition. I got 4-mpg with it. I gave it away with 68,000 miles on it in 1998. It had a 300 cu. in. 6-cyl. motor with standard shift.”
Ford F-250 4x4 highboy pickup
1 Best Buy0 Worst Buys“Back in 1969, I had a 1948 Dodge 1-ton stake rack truck. I could fetch home all I could load. Back then, Dodge knew how to build a truck, unlike the junk they’re selling today.
“In 1972, I got a 1/2-ton Chevy 2-WD. Not a bad ride. I drove it until 1977, then swapped it for a new Ford F-250 4x4 highboy series. In 1999, I sold it to a young high school boy for $500. It had 280,000 miles when the box rusted so badly that he had to build a flat rack on it.
“To replace the Ford, I got a 1997 Mercury Mountaineer with 172,000 miles for $2,600 cash. When I took it to the junk yard and they pulled the plates, it had 446,000 miles and still ran like a bear. I got $575 for it, making it my best buy.
“This past winter, the overall snowfall for the season was 342 in. I had the roof shoveled four times. Many didn’t, and now they’re rebuilding. When we get a 5-ft. snowfall in one day and then it rains, down they go. This spring, I bought a 2021 Case IH 55C 4x4 loader with a full cab, heat, A/C, radio and, best of all, a 6-ft., 2-in. front-mounted snowblower. So, the weatherman can send all he wants.”
Ford F-250 6.2l 4-WD pickup
1 Best Buy0 Worst BuysAlfred’s best buy is his 2015 Ford F-250 6.2l 4-WD pickup. “It runs great, will pull anything, and has had no mechanical problems. Best truck I’ve had since my 1960 Ford F-100 that I drove to Alaska.”
Ford F-250 Diesel Power stroke equipped
1 Best Buy0 Worst Buys“My 1952 Ford 8N tractor is my best buy of all time. This tractor can handle just about anything and does everything I expected it to, and more. It’s a fun tractor to operate and is an all-around awesome machine.
“My 1992 Chevrolet 1500 pickup is the biggest piece of junk I’ve ever owned. Just about everything on it has gone wrong. Right now it’s out of service so I have to drive a van. As a result I can’t haul anything and I hate that. I guess the saying ‘You get what you pay for’ really is true. I want to see what a real truck is like, so I’ll probably buy a 1997 Ford F-250 Diesel Power Stroke equipped with an 8-ft. bed. I’ll never buy a Chevy again. I’ve always been a Ford man and now I know why.”
Ford F-250 SuperDuty 4-WD extended cab pickup
1 Best Buy0 Worst BuysA 2008 Ford F-250 SuperDuty 4-WD extended cab pickup equipped with a 6.4-liter turbocharged engine rates as Dale’s “best buy”. “This Lariat edition truck has about 55,000 miles on it and drives like a dream, empty or loaded. It has explosive acceleration when passing and goes from 0 to 70 mph faster than our two cars. It gets a decent 19.6 mpg on the highway, but only 15 1/2 mpg in city driving. Fortunately, I don’t spend much time in the city.”
Ford F250XL diesel pickup
1 Best Buy0 Worst BuysChris Greanead, Forestburg, Texas: Chris isn't happy with his 1987 Ford F250XL diesel pickup . “This pickup was bor a problem. The only thing I like about itis the radio. At less than 2,000 miles the electrical system went haywire so never know when it will start. If it does start the blinkers, headlights, and tailights might “This pickup was born a problem. The only thing I like about it is the radio.” work, but wouldn'tbeton it, At7,000 miles the clutch and glow plugs quit. I have 70,000 miles on itnow, Also the anti-lock rear end is a joke. It never has worked, I don't think much of Ford's commitment to quality. When I talked to the dealer they sort of laughed and said, ‘Oh, a farm pickup.’ The company didn't seem to care about the problems, either.
Ford F-250 XL 4-WD pickup equipped
1 Best Buy0 Worst BuysLee Roy Campbell, Angleton, Texas: A 1990 Ford F-250 XL 4-WD pickup, equipped with a 351 cu. in. gas engine, 5speed manual transmission, and 3:55 axle, rates as Lee Roy’s “best buy”. “Ithas plenty of pulling power to pull my trailer and tractor, which weigh 8,000 Ibs., through rice fields, Rides very comfortably when empty. After 21,000 miles the original Firestone ASR tires still have plenty of provements, “We've used it on clover seed, canola, corn, and soybeans with good results, However, it needs a larger clean grain elevator, which understand is offered on later models, It's hard to reach the sieve adjustments when the chaff spreader is mounted. We traded in the original header for a 1020 head which performs 100% better. It has a larger diameter auger and hydraulic reel adjustment that lets us fine tune the header depending on the crop.”
Ford F-250 XLT 2-WD pickup equipped
1 Best Buy0 Worst BuysArthur nominates his 1979 Ford F-250 XLT 2-WD pickup equipped with a 400 cu. in., V-8 engine as his “best buy”. “I drove this pickup for 32 years and used it to pull a camper trailer. It started in temperatures down to 60 degrees below zero and never left me stranded. It had more than 200,000 miles on it at the end.”
Ford F-250 XLT Lariat 3/4-ton pickup equipped
1 Best Buy0 Worst BuysDouglas’s “best buy” is his 1991 Ford F-250 XLT Lariat 3/4-ton pickup equipped with a 7.3-liter diesel. “This pickup gets good mileage, has plenty of power and starts easy. It drives and rides like a Cadillac. I’m also pleased with the dealer service.”
Ford F-250 XLT Super duty extended cab
1 Best Buy0 Worst Buys“I like my 2006 Ford F-250 XLT Super Duty extended cab pickup equipped with a 5.4-liter gas engine and automatic transmission. It has about 22,000 miles on it. It came with a B&W Hide-A-Ball and tow package and has no trouble handling our travel trailer and gooseneck trailer.
“I like my 1997 New Holland 3930 4-WD loader tractor equipped with a diesel engine and shuttle shift transmission. I use it with a Woods 5-ft. tiller and 6-ft. rotary cutter. The tractor’s original battery lasted 13 years.
“My 2007 Husqvarna 350 chainsaw had a fuel line leak and a fuel tank leak from the factory. I had to pay the labor for the repair work because a year had passed before I took it in. The saw works good now.
“I like my 2009 Dixon zero turn riding mower equipped with a 26 hp Briggs & Stratton engine and a 50-in. deck. I show this machine no mercy but it’s built strong. My wife can operate it better than I can.”
Ford F-350 1-ton 4-door 4-wd dually
1 Best Buy0 Worst BuysMichael owns a 1994 Ford F-350 1-ton 4-door, 4-WD dually pickup with almost 400,000 miles on it. “I like this pickup so much that even with the high mileage, I wouldn’t trade for a new one. It still looks new and doesn’t have a rattle in it.
“One year after I bought the pickup I had a problem with the engine. I was hauling cars and tractors on a 3-axle, 18,000-lb. capacity trailer when the pickup’s 7.3-liter IH engine blew a head gasket. Even before that I had a problem with glow plugs burning out. So I installed a used Cummins 12-valve diesel engine and 5-speed manual transmission with about 50,000 miles on it. At 5.9 liters, the Cummins engine is a little smaller but it has far more power.”
Ford F-350 2-WD pickup equipped
1 Best Buy0 Worst Buys“Last May we purchased a 1999 Ford F-350 2-WD pickup equipped with a 7.2-liter diesel engine and a 9-ft. long flatbed. It has more than enough power to pull our livestock trailer. Our 1987 Ford F-250 pickup equipped with a 460 cu. in. gas engine sometimes didn’t have enough power to pull heavy loads. The new model starts good in cold weather and even though it isn’t 4-WD it handles good on snowy roads. The flatbed makes it easy to haul large items. One problem is that the ride isn’t as comfortable as we’d like. It gets about 12 mpg pulling a load compared to 5 mpg for the 1987 model.”
Ford F350 4-door Dually pickup
0 Best Buys1 Worst BuyMike Etzkorn, Wapakoneta, Ohio: Mike's had trouble with his 1990 Ford F350 4-door Dually pickup. “Ford's motto is ‘Quality is Job One’, but on my pickup they left out the quality. It looks like this was the first job they ever did. The cab and bed are 1 3/4-in. out of alignment and the doors are so far out of alignment that when you open them they drop down 1/2 in. The bed isn’t square when measured from corner to corner. The pickup pulls hard to the right. The dealer and company tell me this is how all their pickups are made and that my F-350 is the finest in the company’s history. What a laugh! I had been a dichard Ford man. “The dealer and company tell me that my pickup is the finest in the company's history. What a laugh!” However, nexttime I purchase anew pickup I'll choose more wisely and go with a company that stands behind their product.”
Ford F350 4x4 SuperCab xlt 6.7
1 Best Buy0 Worst Buys“I’ve owned several trucks over the years. My 2018 Ford F350 4x4 SuperCab XLT 6.7 Power Stroke has been the most impressive. The towing capacity, fuel mileage, and ease of maintenance have all been ahead of any truck I’ve owned in the past. The steel in the frame is thicker and has a higher tensile strength than a GM or Dodge.
“My worst truck ever was a 2006 GMC 3500 6.6 Duramax. The frame and front end were built for paved highways. The Allison transmission was just a label. It was a real money pit.”
Ford F-350 7.3-liter diesel truck
1 Best Buy0 Worst BuysTim Flannery, Somerset, Penn.; Tim's “worst buy of all time” is his 1990 Deere 7200 corn planter. “This planter is a real lemon. All the bolted-on parts are falling off including gauge wheels, closing wheels, and other parts that we've left scattered throughout my fields. I've had more trouble with it in one season than I had in nine years with my previous 7000 planter. The dealer and company are working on the problems. I hope they solve them.” Tim’s “best buy” is his 1990 Ford F-350 7.3-liter diesel truck. “I like the performance and economy. It’s equipped with a DMI cushion hitch that absorbs the shock of heavy towed loads.”
Ford F-350 Crew cab pickup equipped
1 Best Buy0 Worst BuysCarl’s the satisfied owner of a 1997 Ford F-350 Crew cab pickup equipped with Power Stroke diesel engine and automatic transmission with overdrive. “It drives like a car, rides smoothly for a heavy pickup, and has a lot of power. The cab is comfortable and has plenty of room for six people. The last fuel check, at 12,000 miles, showed 16 mpg on short drives with no load.”
Ford F-350 Super Cab 4-door pickup
1 Best Buy0 Worst BuysJohn’s impressed with his 1999 Ford F-350 Super Cab 4-door pickup. “It has a car-like ride and good brake response. The four doors make it easy to get things out of the rear seat.
“My 1997 Chevrolet Silverado 1500 extended cab 3-door pickup is my worst buy. One problem is that it rides very rough. I had to install helper springs on back in order to make it ride better. Another problem is that the braking system works terrible on slick surfaces. The brake pedal pumps up and down causing the pickup to slide all over the road. My dealer said it was just the ABS brakes ‘working’. Panic stops made me ‘panic’ as braking didn’t start for seconds after I was practically ‘standing’ on the brakes.”
Ford F-350 Supercab SRW pickup equipped
1 Best Buy0 Worst BuysA 2015 Ford F-350 Supercab SRW pickup equipped with a 6.7-liter diesel engine and 3:55 rear end rates as Jesse’s “best buy”. “I use it to pull a 22-ft. 14,000 GVW hydraulic-tilt PJ trailer and a 16-ft. Valley livestock trailer. It has excellent power on hills and the exhaust brake works great. During winter I use it with a Boss 8 ft. 2-in. steel V-snowplow, which is another best buy (www.bossplow.com). I use a Swift Hitch portable wireless camera equipped with a magnetic base to hook up to trailers in back (www.swifthitch.com; ph 617 600-8282). Then in winter I use the same hitch to hook up to the snowplow in front. I like not having to get in and out of the pickup all the time.”
He’s disappointed with the Superwinch 9000 series winch he uses on his PJ trailer. “When I reverse the winch to roll a load off the trailer, the winch binds up by the time the load is off the trailer.”
Ford F-450 4-WD dually pickup equipped
1 Best Buy0 Worst BuysBruce likes his 1999 Ford F-450 4-WD dually pickup equipped with a 7.3-liter Power Stroke engine and automatic transmission. ‘The company I work for purchased this pickup five months ago and it works great. It starts at 10 degrees below zero without being plugged into a heater and works great in the snow. It’s the best pickup I’ve ever seen. It’s built Ford tough.”
Ford F600 freight truck
1 Best Buy0 Worst Buys“Lowell’s impressed with Kroil, a penetrating lubricant (Kano Laboratories, Box 110098, Nashville, Tenn. 37222 ph 615 833-4101; Website: www.kanolabs.com). “I used it mixed with 30-weight non-detergent motor oil to repair a badly rusted 1982 Ford pickup. The pickup’s kingpin began to seize a while ago which caused increased binding and made it hard to steer. The grease zerk wouldn’t take grease. I couldn’t justify the proper repairs so I was in a real fix.
“I sprayed Kroil into the yoke seams, jacked up the wheel, and worked the lubricant in by steering right and left with the engine running. I waited 15 minutes or so but there didn’t seem to be any improvement so I went into the house. Two hours later, when I went back out and got in the pickup I noticed right away that it steered much easier. I had to repeat the treatment twice more over the next few days before the grease zerk began to take grease.
“I used this same procedure on an old Ford F600 freight truck that belonged to a cousin. The truck was almost unsteerable, and he had to drive it from Pennsylvania to California. I applied Kroil to all the linkage and joints which solved the problem in short order. The company claims Kroil will creep into a joint as tight as one millionth of an inch. It sure helps on tight stuff.
“Our Jonsereds turbo chain saw is a best buy. The only repair it has needed was to the crank assembly. Otherwise this chain saw has performed superbly.
“My Porter-Cable circular saw and 1/2-in. heavy duty drill are both outstanding tools. I do a lot of home improvements so I can’t tolerate poor performance in power tools.
“I want to warn readers to avoid power drills with Rohti German-made drill chucks - I can guarantee they will fail. These chucks are found mostly on 1/2-in. hammer drills sold by Milwaukee, Bosch, Dewalt, and Sears Craftsman. The problem is that the chuck weakens rapidly to the point where it’s impossible to keep it tight for even a few revolutions. If anyone has such a tool they should remove the chuck, send it back to the tool manufacturer, and ask for an American-made chuck. I did that for a Milwaukee drill and got a good chuck.
“I’m intrigued with Hammerite paint (MasterChem, Box 368, Barnhart, Mo. 63012 ph 800 325-3552). It might be the only paint that can be successfully painted directly over rust. It has powdered glass in it which makes it durable.“ 3,500 miles. It uses less than a half quart of oil between oil changes.”
Ford F-7000 truck equipped
1 Best Buy0 Worst BuysDon Fromm, Memphis, Mo.: Don nominates his New Idea Seed Boss air planter as his “best buy”. “It plants accurately and has the best seed metering system on the market. The monitor provides total control of the planter and lets me know exactly what's happening with each row. Some bolts came out of the axle when the nuts loosened up, causing me to lose a drive wheel. I also lost a fertilizer coulter, This happened in the first 200 acres, It indicates a lack of quality control at the factory. “My two Great Plains no-till grain drills doanexcellentjob. However, the seed press wheels are too small. They don’t work well when the ground is wet and I have to get in the field. A harrow would work better.” Melvin Roos, Havana, Ill..; Melvin’s pleased with his Ford F-7000 truck equipped with a Caterpillar 3208 diesel engine. “It’s the best cold weather starting engine we have. This truck has performed as we expected itto. Noproblems, It’s a great truck.”
Ford Falcon station wagon
1 Best Buy0 Worst Buys“My best buy is my 1966 Ford F-100 pickup. It has almost 400,000 miles on it but still gets me wherever I need to go with almost no problems. It still runs great.
“In 1978 I bought a used 1967 Ford Falcon station wagon with 95,000 miles on it. Over the years I’ve put about 70,000 miles on it, yet my total cost for repairs during all that time has been only $98. That money went toward a battery, a wheel bearing, and a $15 carburetor.”
Ford Focus 2-door coupe
1 Best Buy0 Worst BuysHe’s the satisfied owner of a 2007 Ford Focus 2-door coupe. “It has about 218,000 miles on it but still has the original engine and transmission and doesn’t use any oil. Very few repairs. Its worst feature is high road noise.”
Ford Freestyle SUV
1 Best Buy0 Worst Buys“My 2005 Ford Freestyle SUV has about 130,000 trouble-free miles on it. It has good visibility and versatile, stadium-style seating for up to six people. The seats fold down to provide lots of room for cargo.”
Ford Genesis tractor
1 Best Buy0 Worst Buys“My 1995 Ford Genesis tractor works great. The only repair it needed was a new wiper blade.”
Ford Genesis 8970 front wheel assist
1 Best Buy0 Worst Buys“The powershift transmission makes this tractor a dream to operate,” says Warren about his 1995 Ford Genesis 8970 front wheel assist tractor. “It’s easy to operate and is easy on fuel. It had some minor hydraulic problems, but my dealer solved them immediately.”
Ford Granada car equipped
1 Best Buy0 Worst BuysRobert Talbot, Walnut, Ill.: Robert's the satisfied owner of a 1977 Ford Granada car equipped with a 302 cu. in. engine. “It has 140,000 miles but still doesn’t use any oil. The rear brakes lasted 100,000 miles before they had to be replaced. It gets 17 mpg.”
Ford GT95 tractor
1 Best Buy0 Worst BuysDonald’s “best buy” is his 1994 Ford GT95 tractor. “I use a 48-in. mower deck with it to cut my 1 1/2 acre lawn and it does a good job. I also use a 42-in. snowblower with it which also does a good job. The snowblower has hydraulic controls and a hydrostatic transmission with high and low range.”
Ford HD-250
1 Best Buy0 Worst BuysMarvin Hahler, Republic, Ohio: Marvin nominates his 3/4-ton, 1984 Ford HD-250 pickup with 6.9 1. International diesel engine as “best buy” “I use it on the farm pulling livestock and flatbed gooseneck trailers with six to ten ton loads, Ithas great power, good fuel economy and a good ride for its size. I seldom have to use the block heater to start it in the winter, even though the pickup sits outside. However, the posi-trac rear end doesn't seem to help with traction. Sometimes it makes a banging noise when the clutches are releasing when loaded and making a left turn, Dealer put anti-friction oil in and said ‘don’t worry about it.”” Waldo Hoffman, Corp., 1416 East North Beit, Suite 160, Houston, Tex. 77032 (ph 713 4495700). That 2-in-1 grain auger vacuum featured in FARM SHOW two years ago (Vol. 9, No. 5) is now on the market. Inventor Ian Saul turned the invention over to Hodge Agricultural Ltd., Westlock, Alberta. The machine consists of a conventional grain auger with a grain vacuum mounted about halfway up its length. Lets you suck grain out of bins rather than using a sweep auger. Sells for around $6,000 (U.S.), Contact: FARM SHOW Followup, Hodge Agricultural Itd., Box 937, Westlock, Alberta TOG 2L0 Canada, (ph 403 3494329 or 421-1106). Who makes the machine that cleans grain by having it gravity-flow over a series of baffles? (Karl Muenster, Rt. 2, Seymour, Wis. 54165). Contact: FARM SHOW Followup, MAG-K Inc, Lee Venable, Box N, Kearney, Neb. 68847 (ph 308 2341893). What's the address of the man who built a machine to slice tires into sections? He then burned the tires in a special stove. (George the “fuelmaker” that cuts up old tires. Since FARM SHOW’s first report, Hoppe has sold production rights to Mantle Industries, Inc., 1100 Yew St., Blaine, Wash. 98230 (ph 206 3325276). three hours. It’s advertised as being so easy to handle. It might be if you don’t have any rocks but it’s so hard for us to handle that we don’t use it.”
Ford Lariat 1/2-ton super cab pickup
1 Best Buy0 Worst Buys“My 1997 Ford Lariat 1/2-ton super cab pickup equipped with a short bed and small V-8 engine is my best buy. It’s built with quality and has a lot of power. It also has a quiet cab.”
Ford Lincoln Mark LT 4-wd pickup
1 Best Buy0 Worst Buys“I bought my 2006 Ford Lincoln Mark LT 4-WD pickup used in 2007 with about 26,000 miles on it. It now has about 150,000 trouble-free miles and is in excellent condition. It’s on its second set of tires and still has the original battery. It gets 18 to 22 mpg with a very comfortable ride.
“I’ve bought four Eden Pure electric heaters within the last 5 years. Each performed well for one season, but then either the thermostat or the heating unit fails. The company always says the heaters are out of warranty so I should return them to the factory for repairs at my expense.”
Ford LT11
0 Best Buys1 Worst BuyTom Johnson, Pennellville, N.Y.: “My best buy ever is my 1972 New Holland 479 haybine. It works almost perfect. The only breakdown it ever had was due to a failed bearing. I don’t think we'll ever own another machine that works this well, “Tlike my 1994 Zimmerman 40-ft. hay elevator, A lot of big companies don’t bother to make small equipment like this, It has a heavy-duty chassis and direct gear drive which is a great idea - there are no chains or belts to slip. “My 1986 Ford LT11 riding mower is a worst buy. The deck is poorly designed and built. We finally replaced it with an International Cub Cadet 1225 garden tractor. It’s a big improvement.”
Ford LTD car equipped
1 Best Buy0 Worst BuysW.A. Gibbs, Elmwood, Tenn.: He nominates his 1974 Deere 1530 diesel tractor as his all-time “best buy”. “This tractor has been a jewel and is without doubt the toughest tractor I've ever seen. It pulls a Deere 410 hay baler in fifth gear in heavy windrows and has done some of the hardest bush hogging work any tractor ever did. “It's been a jewel and is without doubt the toughest tractor I've ever seen.” “My 1983 Ford LTD car equipped with a V-6 3.8-liter engine is still going strong. It has 116,000 miles and is a pleasure to drive, Very little rouble, “My 1979 Datsun 210 car has 170,700 miles, It still has the original engine and uses very little oil.”
Ford Maverick Lariat hybrid pickup
1 Best Buy0 Worst Buys“My 2022 Ford Maverick Lariat hybrid pickup has been a great buy. It gets 35 to…”
Ford Maverick XLT
1 Best Buy0 Worst BuysBlaine’s the satisfied owner of a 2022 Ford Maverick XLT with a 2.0-liter turbo. “I love this little truck. It’s just the right size, drives great, and has plenty of zip. It gets 27 mpg overall. My only dislike is the switchblade-style ignition key. I wish it had the starter button type ignition.”
Ford Model
1 Best Buy0 Worst Buys“My 1928 Ford Model A Coupe is a pleasure to drive and gets a lot of looks. It’s cheap to repair and gets about 20 mpg.”
Ford Model T Roadster car
1 Best Buy0 Worst Buys“My 1924 Ford Model T Roadster car is a best buy. My dad bought it for me in 1952 when I was beginning to learn to drive. I was going to soup up the engine and make a hot rod out of it, but I grew to like this car so much that I decided not to. Dad paid $30 cash for the car. If Ford ever makes another vehicle as good as this one, I’ll buy it.
“My 1984 Nissan extended cab 4-WD pickup runs great. It’s equipped with a 4-cyl. engine and 5-speed transmission, and has plenty of power to pull a 22-ft. livestock trailer. I’d probably buy another Nissan if the company ever brings its 4-WD diesel pickups into the U.S.”
Ford Mustang GT car equipped
1 Best Buy0 Worst BuysA 2005 Ford Mustang GT car equipped with a 5-speed transmission rates as Merlyn’s “best buy”. “I saw a prototype of the new 2005 Mustang and liked it. When it finally hit the showrooms, I bought one because it reminds me of the classic Mustangs from the past. I ordered the car, and 14 weeks later it arrived. I haven’t been disappointed. It drives great and handles well and gets 24 to 25 mpg on the highway. No problems so far.”
Ford N tractor
1 Best Buy0 Worst Buys“After 60 years, my 1945 Ford N tractor still performs with flawless efficiency. It has required only routine maintenance.
“My Drill Doctor bit sharpener is my worst buy. I fought with it for hours, but all I got was a bunch of dull drill bits.”
Ford Powermaster tractor
1 Best Buy0 Worst Buys
When Dick Hayward and his wife moved to their current location 11 years ago, they had some land that needed bush hogging.
Read the whole story →Ford Power Stroke diesel crew cab
1 Best Buy0 Worst Buys“My 2000 Ford Power Stroke diesel crew cab 4-WD pickup has performed flawlessly with only normal maintenance. When you pull a tractor you can’t even feel it back there. I’ve driven it twice to the Atlantic Coast and once to the Pacific. It’s my best buy.”
Ford Powerstroke F-250
1 Best Buy0 Worst Buys“I had a 1995 Ford Powerstroke F-250. I sold it to a neighbor with 556,000 miles on it. It now has over 600,000 and still runs fine. 7.3 Powerstrokes are indestructible.
“I have three Poulan chainsaws, and none start easily.”
Ford QT7210 front-end loader
1 Best Buy0 Worst BuysDavid Barton, Raymond, Miss.: David says his Deere F935 mower makes lawn mowing fun and isa “best buy”. “We cut six “The dealer did all he could, but the company gave me the run-around.” acres with lots of trees and buildings. It’s really fast and efficient. “My Ford QT7210 front-end loader is the handiest tool I've ever had. It’s very easy to take off and put on.”
Ford Ranger 1/4-1on diesel pickup equipped
1 Best Buy0 Worst BuysLawrence Wolf, Greenwood, Wis.: “My best buy of all time is my 1983 Ford Ranger 1/4-1on diesel pickup equipped with a 2.2liter diesel engine and factory weight package. We use it for quick trips and chasing down parts. The engine is remarkable. It has 120,000 miles but still doesn’t use any oil. It's fuel efficient at 29 mpg and starts at 10° ( // + /. FPARMA CHMUOW « 4% Best & We ( below zero. Dealers said it was a slow seller because of the price. But with mileage and performance like this, my investment has been returned many times over.”
Ford Ranger 3-liter V-6 5-speed
1 Best Buy0 Worst Buys“My 1999 Ford Ranger 3-liter V-6 5-speed has 236,000 miles on it. It doesn’t use any oil if I change it regularly and gets about 19 mpg. The only major repair was to replace the clutch. Still runs great.”
Ford Ranger 5
1 Best Buy0 Worst Buys“I purchased my used 2000 Ford Ranger 5 years ago with 140,000 on the odometer. It just turned over 200,000 miles. The only repair I’ve made in that time is a rear pinion seal. I would buy a new Ranger if and when this one gives out.”
Ford Ranger STX extended cab pickup
0 Best Buys1 Worst BuyJeff’s disappointed with his 1987 Ford Ranger STX extended cab pickup. “The 2.9-liter 6-cyl. engine is gutless and gets only 14 to 18 mpg, and the fuel injection is unreliable. The cab has tilt steering and air conditioning and comfortable air-supported seats. However, this pickup doesn’t live up to Ford’s reputation. Mechanically it’s unreliable.”
Ford Ranger STX 4-WD pickup equipped
1 Best Buy0 Worst BuysMarvin Madsen, Morton, Minn.: “I’m completely satisfied with it,” says Marvin about his 1992 Ford Ranger STX 4-WD pickup equipped with a V-6 engine and extended cab. “Handles well and is fuel efficient.”
Ford Ranger Supercab 4-WD pickup equipped
1 Best Buy0 Worst BuysA 1994 Ford Ranger Supercab 4-WD pickup equipped with a 4.0-liter, 6-cyl. engine rates as Ed’s “best buy”. “It looks great and really earns its keep on our farm. One time I got my 1-ton truck stuck when it was loaded with about five tons of gravel. My father-in-law used the Ranger to pull me out with ease. It gets about 21 mpg on the highway.”
Ford Ranger XLT 4-WD pickup
1 Best Buy0 Worst BuysBobby S. Holland, Cynthiana, Kty.: Bobby's impressed with his 1993 Ford Ranger XLT 4-WD pickup. “This is the seventh new 4-WD pickup I’ve bought over the years and it’s built better than any of the others I’ve had. Everything on it works, with no rattles or loose screws, etc. Ithas an excellent paint job. The 4.0-liter engine and 4-speed automatic transmission are a good combination. It has plenty of power and is easy on fuel.”
Ford Ranger XLT King cab 2-wd pickup
1 Best Buy0 Worst BuysCheryl’s the proud owner of a 1995 Ford Ranger XLT King Cab 2-WD pickup. “We bought this pickup seven years ago with about 100,000 miles on it. It now has about 218,000 miles but still doesn’t burn any oil and has required very little maintenance. I just change the oil every now and then. Our son has a 4-WD Ranger with almost 200,000 miles on it, and our daughter has a 1997 Ranger with almost 200,000 miles. We’d definitely recommend Ranger pickups to anyone.”
Ford Ranger XLT Supercab equipped
1 Best Buy0 Worst BuysMike Harris, McNeill, Miss.: Mike's “worst buy” is Surge herringbone barn stalls. “They rusted out at three years, but the dealer wouldn't replace them. The company offered to replace parts at half price if I bought sanitation supplies from them.” Kenneth McEachren, Glencoe, Ontario: “This truck performs perfectly in every way and is the best I’ve ever owned,” says Kenneth about his 1990 Ford Ranger XLT Supercab equipped with a 4-liter V-6 engine.
Ford Raptor 4-WD pickup
1 Best Buy0 Worst Buys“My 2012 Ford Raptor 4-WD pickup is an engineering marvel and an operator’s dream from its moon roof and full leather seats to its full line of superior electronics. It’s a complete ‘wow’ to own.
“Another great product, also made in America, is my Retrax pro bed cover system custom-made to fit on my extra wide Raptor short bed (www.retrax.com). It was simple to install and looks good on the truck. It opens and closes easily by hand, locking at any location. It’s a luxurious-looking, superior functioning unit that’s very well designed.”
Ford Splash Ranger extended cab 4-wd
1 Best Buy0 Worst Buys“Our 1994 Ford Splash Ranger extended cab 4-WD pickup has never let us down and can go almost anywhere. It always starts right up. No problems.
“Our 1993 Chevrolet 1-ton 4-WD, 4-door truck equipped with a 6.5-liter turbocharged diesel engine is our worst buy. We’ve had over 100 problems with it and it’s been in the shop over 20 times. There have been problems with the engine, front end alignment, special options, etc. If it hadn’t been for friends I’d have been stranded several times.”
Ford Supercab XLT 4-WD pickup
1 Best Buy0 Worst BuysRobert nominates his 1997 Ford Supercab XLT 4-WD pickup as his “best buy”. “I used it to pull a fertilizer cart loaded with 6,000 lbs. of product with no problem. In our snow and ice, 4-WD is the answer.”
Ford Super Duty F-350
1 Best Buy0 Worst BuysMyron’s best buy is his 2000 Ford Super Duty F-350 with 390,000 miles. “It’s had regular maintenance and oil changes with Shell Rotella, as well as replacing belts and batteries. It was recalled for the cam sensor that the dealer replaced free of charge. Michigan salt is finally taking its toll.
“My 2005 Cub Cadet lawn tractor with 22 hp. Kohler engine has 2,300 hrs. and is still going strong with regular oil changes plus replacing the battery and starter.”
Ford Tauruses
1 Best Buy0 Worst Buys“I’ve owned three Ford Tauruses - a 2003 SE, a 1992, and a 1987 model. All have been best buys.”
Ford TCS 55 tractor equipped
1 Best Buy0 Worst Buys“My 2004 Ford TCS 55 tractor equipped with a front-end loader is my best buy. It has adequate power and handles unbelievably well for a loader tractor. Also, the cab has great visibility.”
Ford Thunderbird
1 Best Buy0 Worst Buys“One of my best buys of all time is my 1969 Deere 4020 tractor. I still use it. “My 1985 Ford Thunderbird is a best buy. I just traded it in for a 1997 Buick LeSabre which I hope will perform just as well. “My 1994 Ford F-150 pickup equipped with an extended cab pickup and 302 cu. in. engine has been trouble-free. It has 31,000 miles on it. “On the worst buy side I’m disappointed with my Deere 175 hydro lawn mower equipped with a Kawasaki engine. The body of the air cleaner warped at 20 hours. I had to buy an entire new air cleaner - element and all. It wouldn’t start in cool weather until I put an electric fuel pump on it and gave it a little ether. The idler bearings, which were made in Hungary, were poor. “My 1979 Datsun pickup got only 18 to 23 mpg. It burned oil and the exhaust valve seats came out at about 65,000 miles so I had to overhaul the engine. “MySearsCraftsman 9-in. hand grinder was a piece of junk. The armature fell apart but the company wouldn’t even provide a cost estimate on a new one before sending it so I put it in the junk where it belongs. I bought a Sioux grinder which I really like.”
Ford Transit van
0 Best Buys1 Worst Buy“My Danuser Intimidator tree puller is very well built (Vol. 40, No. 6; www.danuser.com; ph 573-642-2246). It pulls up to a 6-in. tree, depending on the type of tree. It also pulls heavy shrubs.
“My Ford F-250 with high output diesel has impressive power. So far, it has 24,000 trouble-free miles.
“I have several issues with my Ford Transit van. There’s a lot of wind noise, the steering wheel is uncomfortable, there isn’t an armrest on the left driver’s side, and it’s a very rough ride if you’re in the rear.”
Ford TV 140 bi-directional tractor
1 Best Buy0 Worst Buys“We’re happy with our Honda 2000 300 4-wheeler as well as our 1997 Tundra LT Ski-doo. We use them both on our farm and in the woods. Both machines stand up well under rough conditions which they get put through at times. No problems with either one. They’re great workhorses with plenty of power and they’re built quite simple.”
A 1999 Ford TV 140 bi-directional tractor rates as Karl’s “worst buy”. “This tractor had problems right from the start. Just about anything that could break on this tractor has been replaced including pumps and hoses, and other miscellaneous parts. It also starts poor in the winter even if it’s plugged into a heater block. The reason for so many problems is that almost everything on it is hydraulic. It has required a lot of repairs which have all been made under warranty. However, now that the warranty has expired I think I’ll sell it.”
Ford TW35 170 hp tractor
1 Best Buy0 Worst BuysDonald Rapley, Climax, Sask.: “My 1988 Ford TW35 170 hp tractor is a best buy. It has plenty of power and the cab is nice and quiet.”
Ford TW5
1 Best Buy0 Worst BuysMichael Choate, Sparta, N.C.: 'In the past 1% years I haven't spent a cent on it. It mixes feed very well and service is exceptional,"' reports Michael about his 1984 "best buy" Knight Augie feedmixer. He nominates his 1985 Ford TW5 tractor as ''worst buy". ''It just doesn't have enough power. The operation of the tractor is just fine but, with a weight of 18,000 Ibs. or better, the 6-cyl. engine is just not enough."
Ford TW5 4-WD tractor equipped
1 Best Buy0 Worst BuysWilliam’s disappointed with his 1996 Deere 348 square baler. “I’ve had nothing but trouble with it since the third day after I bought it. It took more than one year and a lot of headaches to finally get it repaired. We got very little help from the company until we threatened to sue both the dealer and the company. It was finally repaired late last year.” On the “best buy” side, he lists his 1985 Ford TW5 4-WD tractor equipped with a cab, air conditioning, and heater. “It does everything we ask of it and is easy on fuel, easy to handle, and a joy to drive. It has a lot of power and the cab has good visibility.”
Ford Versatile 276 tractor
1 Best Buy0 Worst BuysKen Nelson, Herbert, Sask.: “I’m happy with my 1992 Deere 8960 tractor and 1992 Flexi-Coil 5000 air drill. Both companies have always treated us well. “Our Ford-Versatile 276 tractor has high maintenance costs. We've never received any support from the company to try to make it more trouble-free.”
Ford Versatile 555 tractor
1 Best Buy0 Worst BuysPaul L. Keller, Bejou, Minn.: Paul installed a new Cummins 6TA diesel engine in his Ford-Versatile 555 tractor last year. “It has more power than the old V-8 engine and uses less fuel. I bought the new engine direct from Cummins,” David Hoverson, Cooperstown, N. Dak.: David likes Help-Start, an electronic “battery maintainer” that works together witha vehicle’s engine heater (EM Tek, 605 West Burrel Ave., Box 709, Cooperstown, N. Dak. 58425). Works with tank heaters, block heaters, or crankcase heaters, which are wired to the Help-Start unit. “It provides an extra charge to the battery. Indicator lights let me know that it’s working and that the plug-in heater is working. Makes for easier starts on cold mornings.”
Ford Versatile 946 tractor
1 Best Buy0 Worst BuysRodney Landers, Kennare, N.D.: Rodney’s impressed with his 1992 Kawasaki Bayou 4-WD ATV. “It rides beautifully and handles great. It's a real workhorse. Works fantastic for moving from field to ficld and scouting for weeds. “Our 1993 Ford- Versatile 946 tractor is a best buy. We took the option of wider tires for reduced soil compaction, It really shows up when pulling grain drills. Overall this is an outstanding tractor. The only problem is that it’s hard to shift gears.”
Ford Victoria
0 Best Buys1 Worst Buy“I own a 2000 Ford Victoria and recently discovered that to change a fitting that connects the heater hose to the intake manifold, you have to replace the entire manifold. Outrageous.
“I recently learned that to replace the transmission on new Ford pickups, you have to first remove the cab. I need a new 1-ton pickup, but it won’t be a Ford.”
Ford XL1504-WD
1 Best Buy0 Worst BuysDarroll Kramer, Pine Island, Minn.: “My 1986 Ford XL1504-WD pickup rides and drives like a dream, It has a 351 engine which gives me plenty of power for pulling wagons,”
Ford XL16 lawn
1 Best Buy0 Worst BuysWayne Barricklow, Waverly, Kan.: “It does a nice job of mowing and is easy to handle and maneuver. No problems,” says Wayne, happy with his “best buy” 1990 Ford XL16 lawn and garden tractor. It’s equipped with a 16-hp 2-cylinder engine and hydrostatic transmission.
Ford XL F-250 2-WD pickup
0 Best Buys1 Worst Buy“Our 1999 Ford XL F-250 2-WD pickup has never been in the shop for repairs.
“Our 2002 Honda 200 4-WD ATV is our worst buy. We were able to use it only for a short time before the engine blew up. We had to buy another new model.”
Ford XLT 4-WD Lariat pickup
1 Best Buy0 Worst BuysCalvin Fuller, Forest, Ontario: Calvin says his 1990 Ford XLT 4-WD Lariat pickup is a “best buy”. “It's comfortable and a pleasure to drive, and it has enough traction to go through practically anything. However, the paint quality could be better.”
Ford XLT F-150 4-WD shortbed pickup
1 Best Buy0 Worst Buys“I bought a used 2008 Ford XLT F-150 4-WD shortbed pickup with about 63,000 miles on it. It now has more than 106,000 trouble-free miles. It comes in handy on my hobby farm, and I also use it to give people rides to the doctor or local VA hospital.”
Ford XLT F-250 heavy duty pickup
1 Best Buy0 Worst BuysLeo Shinholt, Corriganville, Md.: Leo says his 1989 Ford XLT F-250 heavy duty pickup is “one terrific truck. It’s equipped witha 7.3-liter diesel engine, 5-speed transmission, and 4;10 rear end, I use it to deliver maple syrup. It'll handle a 4,000 Ib. payload just great. It has all the power I'll ever need, starts easy, and gets 20 to 23 mpg.”
Ford guy whose 2001
1 Best Buy0 Worst BuysGene is a Ford guy whose 2001 Ford Ranger pickup has about 95,000 miles with the only problem being a vacuum leak from a 3-in. hose. “My Ford 7000 and 5900 tractors have also been trouble-free. I use my Ford 340 skid loader for brush and wood removal and for other chores. I like my 2008 Ford Mustang which is equipped with a 400 hp engine and 5-speed transmission.
“I’m happy with the Hammond Equipment replacement belts I bought for that the Multiplaz has, and the cost of running it is almost zero compared to any other form of cutting or welding. I think the way it cuts stainless steel is the most impressive thing it can do. When we were cutting out circles and plate in stainless using the Multiplaz hole cutter, it was amazing. It cut right through, with a pretty clean cut. The amount of gear necessary to compete with the Multiplaz could easily go over $5,000. The fact that the machine can run on 110 volts or 220 volts and has a brain to switch over to the proper voltage that it’s plugged into makes it easy to use.
Ford dia auger
0 Best Buys1 Worst BuyWilson’s happy with his Land Pride hydraulic-operated post auger, which mounts on his tractor’s loader bucket (www.landpride.com). “I bought this auger after trying a couple other models that didn’t work out, including a Ford 12-in. dia. auger and a Shaver post hole driver.
“This unit installs with a 4-bolt bracket which can stay on the bucket, and then you attach it with a 1 by 6-in. pin and two hydraulic hoses that hook up to the tractor outlets. The auger makes use of the loader’s down pressure and has its own 2-way hydraulic unit. I’ve used it in my heavy clay soil to dig more than 500 holes, without a single broken shear pin. It’s a great piece of equipment. It cost $2,000 but was well worth the money.”
Ford tractor be
1 Best Buy0 Worst BuysAlan Sloan, New Boston, TL: “It has good trash clearance and levels the ground at6 mph,” says Alan, owner of a 1989 CaseTH 496 22-ft. disk. “My worst buy is a 1989 White 5100 6row, 30-in. air planter. raise commercial sweet corn and seed corn so I have to make sure the planter is cleaned out each time change crops. Unfortunately this planter is hard to clean out. The boxes don’t drain out right so I have to remove and clean each plastic plate separately, After owning a Deere Max Emerge planter this one is a big disappointment.” Harlan Huedepohl, Williamsburg, Iowa; “Anyone intending to buy a new Ford tractor, be advised you may have trouble attaching implements to the drawbar. Ford has changed the spacing of the drawbar holes so anyone using a clevis-type hitch is out of luck. I purchased a TW25 and found that! can’t pull my New Holland 114 mower-conditioner or Hesston 10 Stakhand. I have no problem using these implements with my Deere or Deutz tractors.”
Ford garden tractor broke
0 Best Buys1 Worst Buy“My Hustler zero-turn riding mower is fuel efficient and has a comfortable seat.
“After 2 months of use the steering shaft on my Ford garden tractor broke in half.”
Ford pickups burning
1 Best Buy0 Worst Buys“In FARM SHOW’s Vol. 29, No. 1 issue you published a story about Ford pickups burning up. Two years ago I bought a 1996 Ford F-150 pickup from my son, who bought a new GM after testing and rejecting several Ford models. He had put about 100,000 miles on the Ford with few problems.
“From what I can determine, the pickups that have burned have an aluminum master cylinder with a plastic fluid reservoir. The faulty switch is at the top front of the master cylinder. It supplies power to the cruise control. The switch is closed until hydraulic pressure opens it and removes 12 volts from the cruise control whenever you step on the brake. The green wire that plugs into the switch is hot at all times even when the pickup isn’t running. There is supposed to be a fuse in the line but I can’t find one. The pickup’s brake light switch is a mechanical type under the dash. You can unplug the switch on the master cylinder, tape up the connector, and tie the wire back with some plastic tie wraps. This is what Ford dealers did until they could get replacement switches from the company.
“This problem only affects vehicles with cruise control. On my pickup I don’t use the cruise control at all so I disconnected the switch and taped it. If you want to use the cruise control you can cut into the green wire and add an in-line fuse holder, then solder and tape the connection. Use a small fuse, 5 amps or smaller.
“I’ve checked my pickup for recalls but haven’t found any. The offending switch was a small square unit made by Texas Instruments. The switch would catch fire and burned through the plastic brake fluid reservoir.
“If you search the internet you’ll find more information on Ford pickups that have burned up.”
Ford diesel engine
1 Best Buy0 Worst BuysMichael Harper, Greenwood, Mo.: Michael’s had problems with the ATS turbocharger kit installed by a dealer on his 6.9-liter Ford diesel engine. “After about 15,000 miles a rubber expandable freeze plug that was part of the kit disintegrated and destroyed the engine. The company had sent out a recall but we never received it. After 1 1/2 years of battling with lawyers they finally settled out of court at the last minute. The lawyers got the money and I got a patched-up engine. The company. is very difficult to deal with.”
Ford ever
1 Best Buy0 Worst Buys“My praise for my 2008 Chevrolet Tahoe hybrid was published in Vol. 39, No. 4. I had it almost 14 years and always got between 24 and 26 mpg cruising under 70 mph. I sold it to a dear friend, and she loves it, too. After selling the Tahoe, I bought my first Ford ever because it’s a hybrid, too. This 2021 F-150 is getting between 24 and 26 mpg and runs on electric 25 percent of the time. It came with a lot of trimmings, too, like a 7,500-watt generator, an ultra-quiet cabin, and more. Buying it left me almost broke but it’s so much fun to drive.
“I also like my Lynxx blower and bush trimmer. Both run for a long time on the same battery. Harbor Freight sells a different brand these days. Where can I buy more Lynxx products?”
Ford tandem axle fertilizer
1 Best Buy0 Worst BuysA.T. Smith, Hindsville, Ark.: He likes his 1988 Ford tandem axle fertilizer and lime truck spreader equipped with a 240 cu. in. engine, 16,000-lb. front axles, and 40,000-Ib. rear axles. “It does a perfect job over all kinds of terrain and doesn’t use any oil.”
Ford pickupequipped
0 Best Buys1 Worst BuyFrank Bird, Loganville, Ga.: Frank's disappointed with his Ford pickupequipped with an automatic transmission with overdrive and 7.3 liter diesel engine. “It had a 60,000 mile warranty, but the transmission went out at 61,000 miles. At 78,000 miles I had to spend $2,300 more on transmission repairs, and at 89,000 miles another $1,800.”
Ford ranger/lariat
1 Best Buy0 Worst BuysAndrew’s the satisfied owner of a 1979 Ford Ranger/Lariat F-350 “camper special” pickup. “I bought this pickup to haul firewood and to tow a trailer. It’s the strongest, toughest, and most comfortably stable truck I’ve ever owned. It’s far tougher and more stable than my newer 1998 model.
“My Troy-Bilt commercial walk-behind mower equipped with a 42-in. deck is my worst buy. The blades were timed not to hit each other, using a timing belt that worked similar to a car’s timing belt. However, the belt would jump time every time I hit a stick or small rock, etc., which caused the blades to hit each other and get hung up. Another problem is the safety lever for the drive wheel was located on the opposite side of the discharge chute, so I had to keep my hand against the fence if I was trimming close to it.”
Ford took
0 Best Buys1 Worst BuyHarold Weppler, Morse, Sask.: “It makes the best round bales on the market,” says Harold, owner of a 1988 Deere 430 round baler. “It’s simple to operate and requires little maintenance. “My 1984 Deere 7721 pull-type combine is also a best buy. It does a good job, is easy to adjust, has lots of capacity, and holds its value.” On the negative side, “The feeder chains on my 1989 New Holland 358 mix mill were installed backward. The mill's engage pin sometimes flies out under a load. The dealer couldn't fix it. Ever since Ford took over New Holland the quality has been poor. “My 1986 Case-IH 5600 cultivator is also a worst buy. Two sets of shanks had to be replaced and the wing lift binded and fell down, bending the axle. The wing lift holdup tower tore out of the frame and left hoses dragging. The walking beam axles had to be rebuilt twice.”
Ford van
0 Best Buys1 Worst Buy“My 2000 Buick Century has more than 90,000 miles on it and averages 32 mpg in all kinds of driving. On three different tankfuls of gas it averaged 42 mpg. My only expense has been for routine maintenance.
“My Ford van was my worst buy. The transmission went out the first week we had it. Then the valves had to be ground at about 40,000 miles. The ignition went out at 45,000 miles, the timing chain at 60,000 miles, and the water pump at 65,000 miles.”
Ford wants
0 Best Buys1 Worst BuyDavid J. Wiebke, Remsen, Iowa: David’s“‘very satisfied” with his 1993 M & W 1400 riding mower. “It handles like a dream and doesn’t leave any windrows. It “If Ford wants to sell lemons they should get in the fruit business.” has cut my mowing time from four hours to 1 1/2 hours. Our old Cub Cadet was the equivalent of a Ford Pinto, butournew M & W is the equivalent of a Lincoln Continental.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.