Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 21, No. 1 (1997)

Best & Worst Buys: FARM SHOW Vol. 21, No. 1 (1997)

69 reports from pages 14–16 · 61 Best Buys19 Worst Buys · See everything in this issue at FARM SHOW →

Worst Buy

Ondura roofing

Bill Irwin, Glade Valley, N.C. · Vol. 21, No. 1 (1997), p. 14

“My worst buy is Ondura roofing which I had installed on my barn. The south side of the roof rotted away and I can stick my finger through the roof just about anywhere. After five years the roof’s color was completely gone and after nine years the product itself was no good. The company wouldn’t do anything to help and the dealer stopped carrying the product. I lost thousands of dollars on it. I hope I never get taken in by anything this sorry again.”

Best Buy

John Deere 9600 rear wheel assist + 1 more

Lane T. Devlin, Smith Center, Kan. · Vol. 21, No. 1 (1997), p. 14

Lane likes his 1990 Deere 9600 rear wheel assist combine. “It hasn’t had much downtime and is easy to adjust and maintain. However, the bearing assembly on the straw walkers requires about a tube of grease every day. One of the straw walkers broke at about 1,400 hours, but that was the first time we were kept out of the field for more than an hour or two. My dealer had a new straw walker in stock and had it installed within five hours. The straw walker system is the weak point of this machine. I like the header - it stands up to the abuse of driving on terraces and ditches. I mounted a Vittetoe chaff spreader on back and it works good, too.”

Best BuyWorst Buy

Richardton 770 2-wheel 1 + 1 more

Mitchell Stauber, Kewaunee, Wis. · Vol. 21, No. 1 (1997), p. 14

Mitchell’s impressed with his 1996 Richardton 770 2-wheel, 1,050 cu. ft. dump cart. “I really like how it turns at the end of the field. It’s much more maneuverable and built twice as sturdy as the 4-wheel Byron wagon that I had been using. It also dumps faster and floats better in wet conditions.” On the “worst buy” side, he lists his 1996 Deere 6810 self-propelled chopper. “The chopper itself works good, but with all the electrical systems something is always going wrong. I put about 700 hours on it the first year and at the end of the season there wasn’t much left on the electrical systems that still worked. I also had problems with the rotary screen, knife sharpening system, spout rinse, Power Saver relays, warning flashers, and electric system for the hydraulic breakaway couplers. The system for keeping the rotary screen clean works terrible. It’s designed to use suction from the exhaust pipe, but the suction is too weak to pull wet hay or silage through a 6-ft. pipe, which causes the pipe to plug up several times each day. We have to use a piece of wire in order to poke the material out. I think the company could have built a better machine.”

Best Buy

International Harvester 1460 Axial Flow combine

Richard H. Stambaugh, Rocky Ridge, Md. · Vol. 21, No. 1 (1997), p. 14

“My 1979 International 1460 Axial Flow combine is a wonderful machine and a pleasure to operate. It’s the first combine I ever bought, but I can’t imagine wanting anything better than this great old machine. I really like the flex head. I removed the wooden reel batts and steel teeth and replaced them with aluminum batts and plastic teeth. I drilled and tapped the holes so that the back side of the batts are smooth with no nuts exposed.”

Best Buy

John Deere 7720 combines

Gordon Stoner, Outlook, Mont. · Vol. 21, No. 1 (1997), p. 14

Gordon’s the satisfied owner of three 1983 Deere 7720 combines. “They’re reliable machines with a lot of capacity. We used them on more than 5,000 acres last year and had a total of only about three hours of downtime. We added air chaffers and built our own beaters which we slowed down to 100% of cylinder speed. We also reversed the rotation of the conveyor augers and made modifications so we can dump tailings into the middle of the feederhouse. In small grain, our 7720’s have almost as much capacity as the larger 8820 models.”

Best BuyWorst Buy

International Harvester 4200 mulcher-field cultivator + 2 more

Dave Setlik, Ord, Neb. · Vol. 21, No. 1 (1997), p. 14

Dave nominates his International 4200 mulcher-field cultivator as his “best buy”. “It has good trash clearance and eliminates the need for a disk. We mounted a rolling stalk chopper off an International 468 seedbed conditioner on it which makes it work even better. We make one pass with it in untouched corn stalks and we’re ready to plant.” On the “worst buy” side, he lists his Sanborn 1 hp 7-gal. portable air compressor. “It worked good at first, but after a few months it was unable to hold pressure. Also, the electric motor malfunctioned, blowing fuses. Difficult to start it up.” John Brushaber, Double D Farms,

Best Buy

Case-IH 2166 Axial Flow combine

Beaverton, Mich. · Vol. 21, No. 1 (1997), p. 14

“My Case-IH 2166 Axial Flow combine works good and has enough capacity that I was able to install variable speed on the header drive. It’s an easy machine to maintain. One problem was that we had to remove the air cleaner before we could get the combine in our shed. I solved the problem by lowering the air cleaner and exhaust to the height of the cab. I also had a canvas cover made for the grain tank.”

Best Buy

Crud Remover

Don Hoes, Albert Lea, Minn. · Vol. 21, No. 1 (1997), p. 14

“I use a product called Crud Remover which can clean oil and grease stains off any surface. Works great, and it’s non-flammable and biodegradable.” (Protective Products Corp., Box 246, Johnston, Iowa 50131 ph 800 666-0772).

Best Buy

Case-IH 1680 Axial Flow combine

Jerry Stahr, York, Neb. · Vol. 21, No. 1 (1997), p. 14

“My 1991 Case-IH 1680 Axial Flow combine is simple to operate and maintain, and I don’t have to make many adjustments to it when switching crops. The Cummins engine has adequate power. The company’s new 2000 series combines have power brakes and improvements made to the cab, which I think were needed. I use a model 983 corn head on it. It’s an older model but I like it because it’s aggressive and trouble-free. I use an 820 flex head in beans. It works alright but I’m sure the company’s new heads work better. I installed a new-style cleaning fan and really like it. It increases the air flow under the sieves and makes the air flow more uniform. I also used the fan on my 1480 model which I owned before.”

Best Buy

E-Z Trail self-loading basket wagons

John Hohmann, Pataskala, Ohio · Vol. 21, No. 1 (1997), p. 15

John likes his E-Z Trail self-loading basket wagons for small square bales that eliminate the need for a bale thrower (E-Z Trail, Inc., R. 133, P.O. Box 168, Arthur, Ill. 61911). Bales are pushed up an angled chute and gravity-unload through a rear gate. “The bales unload in seconds with no need for extra help so they’re real labor savers. It really helps me out because my adult kids are rarely able to help me bale hay any more. We use the wagons to make 4,000 to 7,000 bales every year for the local horse market and for our own livestock. Our hay baskets are safe - no chance for anyone to fall off a wagon - and simply designed - no ‘bale kicker’ mechanisms to wear out - way to get our crop gathered up.”

Worst Buy

Ford F-150 pickup

Frank Stehno, Stratton, Neb. · Vol. 21, No. 1 (1997), p. 15

Frank’s had problems with his 1992 Ford F-150 pickup. “The door handles and electronic door locks on it are a joke. The problem is that a part on the handle wears out, allowing the handle to break away from the door. In order to replace the part I have to replace the entire door latch mechanism. The electronic door locks quit working a long time ago. The dealer says new parts would cost $116. The clutch pedal is another problem. Due to wear I can’t push the pedal down far enough in order to start the pickup. I had to replace the clutch before the pickup had 50,000 miles on it. I replaced the muffler and exhaust pipe even earlier.”

Best Buy

Kawasaki Mule ATV

Jim Guthrie, Lindale, Texas · Vol. 21, No. 1 (1997), p. 15

“Our 1994Kawasaki Mule ATV is one of the best pieces of farm equipment we own. We use it continuously to feed cows, check fences, carry tools, etc. It’s reliable and economical to operate, and the posi-traction rear axle lets me go almost anywhere in all kinds of weather. It feels like it has enough power to climb a tree.”

Best Buy

New Holland TR86 combine equipped + 1 more

James E. Greuel, Trilla, Ill. · Vol. 21, No. 1 (1997), p. 15

A 1991 New Holland TR86 combine equipped with rear wheel assist rates as James’s “best buy”. “I use it in a variety of crops including wheat, corn, soybeans, and buckwheat. The 7.8-liter 6-cyl. engine has a lot of power. The combine has twin rotors and a grain pan under them which, along with a straight-out grain auger, results in excellent grain quality. That’s especially important to me because I grow soybeans for seed. It turns short and the hydraulics, controls, cab comfort, and visibility are excellent. Last year most of my buckwheat was wet and green at harvest and a lot of the soybeans were short, but I didn’t have any problems. I had to use the feederhouse reverser only once in about 130 hours of operation. It also did a nice job shelling corn with minimum loss. Corn quality was excellent. “I use a New Holland 973 20-ft. grain platform and a 6-row Deere corn head with the combine. The grain platform is one of the best on the market today. The lateral float feature works great. The machine is easy to service and repair and is also easy on fuel. I recommend using a chaff spreader with the combine.”

Best Buy

International Harvester 8465 round baler

Pete Gilliland, Ludlow, Mo. · Vol. 21, No. 1 (1997), p. 15

“Our 1996International 8465 round baler is easy to operate and maintain and is a joy to use in any kind of hay or straw. We made about 650 bales with it last year. I really like the baler monitor. “My 1972 International 666 tractor equipped with a diesel engine is a best buy. The engine has never been touched and can go for days on a tank of fuel. We use the tractor to do a lot of different jobs including chores around our feedlot. Too bad the company doesn’t go back to making a simple tractor. I don’t need a lot of bells and whistles on a chore tractor. “All of our International Axial Flow combines are best buys. We’ve owned two 1460’s, a 1660, and a 1680 with no problems on any of them.”

Best BuyWorst Buy

Case-IH 7110 4-WD tractor + 3 more

Reginald E. Wilson, North Gower, Ontario · Vol. 21, No. 1 (1997), p. 15

“I sold my Case-IH 7110 4-WD tractor to get rid of the payments and then I fixed up my Oliver 1855 tractor with a new engine, radial tires, and lights. I also mounted a White 105 cab on it. I’m very happy with it. It’s doing the same work we did with the 7110. “My 1984 Deere 6620 combine is my worst buy. Last year the rubber drain line at the bottom of the oil filter blew out, causing the engine to lose oil. We had to make repairs, including installation of a new crankshaft. The company should have used steel-braided line instead of rubber.”

Worst Buy

Chevrolet K-20 4-WD pickup + 1 more

Leonard J. Arenz, Streator, Ill. · Vol. 21, No. 1 (1997), p. 15

Leonard’s had problems with his 1980 Chevrolet K-20 4-WD pickup. “I’ve replaced everything on it except for the paint, but the pickup still causes me a lot of trouble. I’ve replaced the engine three times, the transmission twice, and the transfer case. It now has a factory-rebuilt engine that uses about a quart of oil every 100 miles. I’ll never buy a GM product again. “I’m also not happy with my Deere 7000 planter. It works okay but not like I expected. To get adequate performance I’ve had to install a lot of ‘kits’ on it. It’s an expensive planter to operate.”

Best BuyWorst Buy

Comtronix FM 2-way programmable radios + 1 more

Terry Cofer, Searcy, Ark. · Vol. 21, No. 1 (1997), p. 15

“My best buys are my Comtronix FM 2-way programmable radios. The programmable feature allows me to pick up the weather channels or my neighbor’s frequency as well. These radios are real time and money savers. They don’t cost as much as the fancy brands but are built just as tough. “My worst buy is Ag Bag silage inocu-lant. The company said the inoculant would make good silage even better. However, after I used it on my silage I found moldy chunks as big as basketballs all throughout the bags. I’ve been custom bagging silage for fourteen years and have never seen this happen before. The company didn’t know what caused the problem and didn’t seem to care.”

Worst Buy

Chevrolet 2500 4-WD pickup

Paul Ervin Cherrington, Jr., Oak Hill, Ohio · Vol. 21, No. 1 (1997), p. 15

Paul’s disappointed with his 1995 Chevrolet 2500 4-WD pickup. “My troubles started immediately with the brakes and wheel hubs - they’ve been turned or replaced numerous times. The pickup has only about 24,000 miles but is already on its fourth set of shocks. An ignition wire burned out while I was driving which left me stranded on the road. However, the worst problem is with the brakes. Occasionally in wet weather one of the front brakes locks which causes the pickup to pull drastically to one side. I’ve had one wreck and several near-misses. The company still insists that they can fix these problems.”

Best Buy

Ram 250 pickup equipped

Ron Myers, Minot, N. Dak. · Vol. 21, No. 1 (1997), p. 15

“My 1992 Dodge Ram 250 pickup equipped with a diesel engine and 5-speed transmission is my best buy. It has a lot of power and is easy on fuel. It’s the best-starting diesel pickup I’ve ever had. No problems after 75,000 miles.”

Best Buy

Gen replacement points

John Steinberger, Kenmare, N. Dak. · Vol. 21, No. 1 (1997), p. 15

”I like the Gen replacement points that I installed on my Case-IH 8500 air seeder (Gen Mfg., Coaldale, Alberta, Canada). One of the points that rode in a wheel track lasted over 5,000 acres. The points form trenches which allow the seed to always be placed in moist soil.”

Best BuyWorst Buy

Caterpillar 1160 V-8 225 hp + 1 more

Clark Dysle, Scio, Ore. · Vol. 21, No. 1 (1997), p. 15

“I installed a Caterpillar 1160 V-8, 225 hp remanufactured engine in my 10-yard dump truck. It starts easy, has a lot of power, is fuel efficient, and easy to maintain. “My 1987 Ford F-250 pickup equipped with a diesel engine is my worst buy. The pickup runs good but has a hydraulic clutch that’s poorly engineered. The master and slave cylinders are made from plastic and wear out about every 50,000 miles. It costs about $200 to replace them. Perhaps a system could be designed that uses hydraulic pressure from the power steering system. Why not go back to metal cylinders with stainless steel liners?”

Best Buy

Vermeer 504

W. Gene Davis, Broadway, Va. · Vol. 21, No. 1 (1997), p. 15

“My 1996Vermeer 504 I round baler makes nice, tight bales that are easy to load and haul on the highway. I’ve used it to make about 1,000 bales with only minor problems that were easily corrected.”

Best Buy

Woodmaster outdoor wood-burning furnace

Marlin Martin, Penn Yan, N.Y. · Vol. 21, No. 1 (1997), p. 15

A Woodmaster outdoor wood-burning furnace rates as Marlin’s “best buy” (Northwest Mfg. Co., Box 124, Red Lake Falls, Minn. 56750 ph 218 253-4328). “We kept hearing news reports about house fires that were caused by faulty wood stoves or chimneys, and the chimneys in our house were old so we finally decided to invest in an outdoor furnace. No more ashes, dirt, or fires to worry about. We fill the furnace once a day with 4-ft. or longer wood chunks. Heated water runs through underground pipes from the furnace to three different buildings. The pipes can be connected to an existing hot water system or to a forced air furnace. I liked it so much I became a dealer and will gladly mail free brochures to anyone who’s interested (4076 Taylor Rd., Penn Yan, N.Y. 14527).”

Best BuyWorst Buy

Hydrobed + 1 more

Pat Robert, Dillon, Mont. · Vol. 21, No. 1 (1997), p. 15

“My 1994 pickup-mounted Hydrobed has been completely trouble-free (Triple C Mfg., Rt. 4, Box 4A, Sabetha, Kan. 66534). I can pick up and haul two round bales at a time and then pull a horse trailer with no changeover whatsoever. “The StockDoctor I bought in 1994 is my worst buy. It consists of a syringe connected to a pole by a retractable tether line. After you inject the animal you use the retractable line to retrieve the syringe. The problem is that it’s not easy to sneak up on the animal and inject the syringe, and even when you do, the medication will only get into the animal about half the time. The rest of the time it drops onto the ground.”

Worst Buy

John Deere 3-pt quick hitch saves

Bill Race, Crook, Colo. · Vol. 21, No. 1 (1997), p. 15

“My Deere 3-pt. quick hitch saves a lot of time hooking up implements and is safe to use. It eliminates the need for my wife to help me hook up implements. “MyDeere 2280 self-propelled swather is my worst buy. It was in the shop for repairs two summers in a row. We had to spend about $10,000 on repairs which is about as much as we originally paid for it. All the downtime we had last summer put us way behind schedule. At one point our frustrated Deere repairman discovered that there were three 2280’s in shops along the I-80 interstate highway in our area.”

Best Buy

Chevrolet pickup equipped

Leland R. Gappmayer, Spanish Fork, Utah · Vol. 21, No. 1 (1997), p. 15

Leland nominates his 1995 Chevrolet pickup equipped with a diesel engine as his “best buy”. “It’s easy on fuel and has a lot of power. I’ve owned both Chevrolets and Fords over the years, but this one is the best ever. Another advantage is that Chevrolet pickups have great trade-in value.

Best Buy

Crary Air Reel

William J. Rietveld, Chicago Hts., Ill. · Vol. 21, No. 1 (1997), p. 16

“My best buy this year was a Crary Air Reel. It’s the best way to get both short and tall soybeans. There are absolutely no beans lost at the cutterbar. I have the reel mounted on a Case/IH 1640 combine and feel it has paid for itself in one season.”

Worst Buy

Chrysler Concorde

Don Blake, Cherokee, Iowa · Vol. 21, No. 1 (1997), p. 16

“My worst buy in an automobile in 65 years has to be our 1994 Chrysler Concorde. The excessive wind noise around the doors and windows, as well as the road noise, is very tiring. We’ve taken it back to the dealer four times and contacted Chrysler Corp. but nothing has been done about it. My brother bought one at the same time and has had the same problem.”

Best Buy

Ford 5610 tractor

Coy G. Cleveland, Paradise, Tex. · Vol. 21, No. 1 (1997), p. 16

“I’m very pleased with my 1987 Ford 5610 tractor. Excellent hydraulics and a good, roomy cab with good heat and air. However, with the power that it has, it needs a little bigger cooling system. Works fine in ideal conditions, but we have problems if a little trash collects on the tractor when temps are 90° or higher.”

Best Buy

Kuhn 3-pt pto-driven

Arvin G. Reu, Luverne, Minn. · Vol. 21, No. 1 (1997), p. 16

“My 1993Kuhn 3-pt., pto-driven Gyro rake does a good job fluffing hay for faster drying. It doesn’t ‘rope’ the hay which results in more even feeding into the baler, especially with grass hay. I like being able to pick up and clear end rows and then set them back down. It allows me to cut my raking time by one third. I can rake hay in any direction and get a clean sweep.”

Best Buy

New Holland model

Donald H. Petersen, Sebeka, Minn. · Vol. 21, No. 1 (1997), p. 16

will easily outperform competing combines. However, it unloads slow and the unloading auger doesn’t reach high enough to allow dumping into a semi tractor trailer. Routine maintenance is a pain. For example, there’s no fast, easy, way to adjust the rear concave. Also, the lower ‘frame’ of the combine is built rather weak. When I jack up the front of the combine, I have to be careful where I place the jack in order to keep from cracking the frame. The radiator air intake clogs up easily, the engine doesn’t start in cold weather, and I have to replace the starter every two years or so. I use the company’s 1143 corn head with it and it’s one of the best I’ve ever seen. If I were in the market for a new combine I’d buy a New Holland model. New Holland combines have comfortable cabs with easy-to-reach controls and are powered by the Genesis engine. My New Holland 8970 tractor has the same engine and it’s a great one.”

Best Buy

Big Bud 360 hp tractor

Harvey Fender, Assiniboia, Sask. · Vol. 21, No. 1 (1997), p. 16

Harvey likes his 1978 Big Bud 360 hp tractor which he bought used 14 years ago. “We farm more than 5,000 acres and this tractor is our main power unit for pulling 59-ft. toolbar-mounted implements. No major problems. The air conditioner and radio still work, and the cab is quieter than the cabs on most newer tractors. Also, it rides like an old Cadillac. What more could I want?”

Best Buy

Easy Walker bean buggy

Stuart Oberg, Slayton, Minn. · Vol. 21, No. 1 (1997), p. 16

A 1995 Easy Walker bean buggy rates as Stuart’s “best buy” (B & D Mfg., Moorland, Iowa). “I can cover four rows at a time by holding a spray wand in each hand. It’s equipped with an ‘inching pedal’ which lets me go very slow. The transmission has five forward gears and one reverse. It’s a low-cost machine that’s inexpensive to maintain. I paid about $1,500 for it and spent another $700 or so for the second wand and for a radio, tank, and umbrella. I just love this piece of equipment.”

Best Buy

Crustbuster 3400 no-till grain drill

Robert C. Tillman, Carthage, Ill. · Vol. 21, No. 1 (1997), p. 16

Last year Robert bought a used 1993 Crustbuster 3400 22-ft. no-till grain drill and says it’s his “best buy”. “I’m well pleased with it. The depth control and down pressure are easy to adjust, and it plants accurately. I’ve used it on soybeans, wheat, oats, and alfalfa.”

Best BuyWorst Buy

Rounder 700 skidsteer loader + 2 more

Craig C. Noring, West Liberty, Iowa · Vol. 21, No. 1 (1997), p. 16

“My 1976 Rounder 700 skidsteer loader is built strong and always starts even in temperatures as low as 30 degrees below zero (Oakes Mfg., Oakes, N. Dak. 58474). All the components on it are easy to service, and even though the company has been sold three times parts are still easy to get. We use it hard. I added Versa teeth to the bucket and really like them (Fisher Mfg., Box 118, New Paris, Ohio 45347)).” On the “worst buy” side, he lists a Lester building. “One of the post holes was dug too deep so the pole is 4 in. lower than it should be, causing the building to sag. Two other poles are out of plumb so the door won’t open and close correctly. The company refuses to pay for even half the cost of having a competent contractor come out and correct the mistakes.”

Best Buy

Bush Hog 1445 disk

Kenan Drebenstedt, Mediapolis, Iowa · Vol. 21, No. 1 (1997), p. 16

Kenan owns a 1991 Bush Hog 1445 disk and says it’s his “best buy”. “I enjoy using it and never have any problems getting it into the ground. It works especially well on corn stalks and cuts right through the heaviest residue.”

Best Buy

Ferguson + 1 more

Gerald R. Kandell, Clark Lake, Mich. · Vol. 21, No. 1 (1997), p. 16

“Our best buy of all time is my 1953 Ferguson TO 30 34 hp tractor equipped with a 3-pt. hitch. By a farmer’s standards this tractor is worthless, but we get $100 every time we use it to do grading work around pole barns under construction. We also use it to do backhoe work. We use a manually-operated Kelly loader on it. Hardly a day goes by that we don’t use this tractor for something. We paid $2,300 for it. We also have three other Ferguson TO 30’s. We buy them at auctions.”

Best Buy

Case-IH 7140 tractor + 1 more

Jim Hadwiger, Cherokee, Okla. · Vol. 21, No. 1 (1997), p. 16

Jim owns a 1988 Case-IH 7140 tractor. “It has a lot of comfort and power, but I wish the power steering system worked better so that it would be a little easier to turn. One problem is that I don’t have a dealer close by - I have to drive a long way to get parts. I use a Deere 410 backhoe on it and am well satisfied with it. However, I wish I could raise it higher - I can stack bales only three high.”

Worst Buy

Ford tractor

Jim Bennett, Burlington, Wis. · Vol. 21, No. 1 (1997), p. 16

Jim’s “worst buy” is a 1990 7710 Ford tractor that he bought in 1991. “It was a leased tractor that I bought with only 327 hours and with the remainder of the warranty intact. The tractor’s been a problem from day one. Almost as soon as it was delivered, I discovered the hydraulic remotes didn’t work. So much for fall plowing. Next, the rear main seal went out of the engine. Those two problems were fixed promptly by the dealer, Converse Equipment at Whitewater, under warranty. Soon after that, however, the engine developed a vibration that shook a plug out of the intake manifold. That, in turn, caused the intake to suck in dirt which, in turn, caused the engine to use a lot of oil. The dealer brought me a new plug right away but that didn’t stop the vibration problem. I’ve been round and round with the dealer for almost three years on this problem and it remains unresolved. Now the warranty has expired.”

Best BuyWorst Buy

Case-IH 5130 Maxxum tractor + 1 more

Burton Somerville, Stayner, Ontario · Vol. 21, No. 1 (1997), p. 16

Burton’s pleased with his Case-IH 5130 Maxxum tractor. “It has about 3,000 hours on it and has never been back to the dealer. We do all the maintenance work in our shop. The cab has good visibility and a comfortable seat which makes it a pleasure to drive.” On the “worst buy” side, he lists his Hardi computerized sprayer. “Parts are hard to get in our area since the local dealer went out of business. If we can find parts they’re overpriced, and no one is available to repair the computer.”

Best BuyWorst Buy

Wood-Mizer portable band mill + 1 more

William G. Jakes, Murfreesboro, Tenn. · Vol. 21, No. 1 (1997), p. 16

“My 1994 Wood-Mizer portable band mill is my best buy ever. It’s extremely accurate and simple to use, and it does everything the company said it would and more. I’d recommend it to anyone. “MyMcCulloch chain saw is my worst buy. Bar oil got in the motor which caused the saw to smoke so bad that I could hardly see. My dealer gave me a new McCulloch and it’s the best saw I’ve ever owned.”