Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 6, No. 3 (1982)

Best & Worst Buys: FARM SHOW Vol. 6, No. 3 (1982)

48 reports from pages 10–13 · 40 Best Buys12 Worst Buys · See everything in this issue at FARM SHOW →

Best Buy

Gehl

Donald Hale, Delevan, N.Y · Vol. 6, No. 3 (1982), p. 10

Donald Hale, Delevan, N.Y: “It'll never work when you need it. It blows its own fuses," says Donald, upset with his model 25 Winco alternator. As for his “best buy’ Gehl 7200 flail chopper, Donald says, “It'll cut anything. Even wet hay after the heaviest rains won't plug it.”

See this page at FARM SHOW →
Best BuyWorst Buy

John Deere

Jerald L. Smith, West Point, Miss · Vol. 6, No. 3 (1982), p. 10

Jerald L. Smith, West Point, Miss: “Deere products are over-priced and over-rated on power. But they have an outstanding dealer service network in this area and, when my 1979 Deere 2840 developed faulty hydraulic couplings, they stood behind their warranty,” says Jerald, happy with his ‘‘best buy” tractor He says he doesn't have a “worst buy” because he hasn't bought any late model equipment recently. ‘We can't pay for machinery made by $12 to $20 per hour labor with 50 cent cattle and $2.48 corn," he notes.

See this page at FARM SHOW →
Best Buy

Harold Nelson, Lafayette, Minn · Vol. 6, No. 3 (1982), p. 10

Harold Nelson, Lafayette, Minn: “l bought a natural air drying corn bin with extra large fan and motor in 1978 and experienced less than satisfactory results the first three years — until bought a “best buy” stirator built by David Manufacturing Co. in Mason City, lowa. The machine is simple and trouble-free, and has an excellent stirring pattern. Last fall, with the stirator blending the bottom dry corn with the wet, I dried my corn down 10 points to 1542% in 14 days. would never consider a natural air bin of any brand without a stirator “Another ‘best buy’ is my Deutz 72 hp tractor,’ says Harold. ‘In six years, I've averaged less than 14% gallons diesel fuel per hour,”

See this page at FARM SHOW →
Best BuyWorst Buy

John Deere

Gerald R. Holtz, Rib Lake, Wis · Vol. 6, No. 3 (1982), p. 10

Gerald R. Holtz, Rib Lake, Wis: “Our biomass furnace, built by Dunn Energy Systems, Inc., has to be our ‘worst buy’,”’ reports Gerald. ‘“‘We paid $5,000 for it and didn’t get one full heating season out of it. They were out once to repair welds which pulled apart. Shortly after, the firebox cracked, allowing smoke to fill the barns. When the blower came on it fanned the fire, compounding the problem, Dunn has promised since March of 1981 to fix it for us but no one has shown up yet, even after many phone calls. “Our ‘best buy’ has to be our JL 306 skidding winch by Farmi of Finland,” says Gerald. “It makes a good wood-handling machine out of our 520 John Deere.”

See this page at FARM SHOW →
Best Buy

International Harvester

Robert Marisch, Spalding, Neb · Vol. 6, No. 3 (1982), p. 10

Robert Marisch, Spalding, Neb: “After reading your ‘Owners Report On Best, Worst Planters’ in your Vol. 6, No, 2 issue, I must make a few ‘best buy’ comments in connection with my International 500 Cyclo planter. After 15 years of no-till planting in which I use my Cyclo for planting on old row ridges, I feel very confident in my system. Here's how it works: 1. Apply anhydrous ammonia. 2. Harrow or chop stalks. 3. Plant corn, apply herbicide, insecticide and starter fertilizer all in one operation. 4. Cultivate twice. 5. Harvest. “The system saves time, soil and water. have almost no weed problems, no volunteer corn and no need for large expensive equipment.”

See this page at FARM SHOW →
Worst Buy

William W. Wells, Rushville, Il · Vol. 6, No. 3 (1982), p. 10

William W. Wells, Rushville, Il: “You can add to your list of ‘worst buys’ the sparrow trap for farm buildings from Last Perch in Mitchelville, lowa, which I read about in had it over a year now and so far it has cost me about $5.00 per caught bird. I moved it to three different locations, hoping for better results but to no avail."

See this page at FARM SHOW →
Worst Buy

Massey Ferguson

Richard Ott, Cleghorn, Iowa · Vol. 6, No. 3 (1982), p. 10

Richard Ott, Cleghorn, Iowa: “'! bought a new 265 Massey Ferguson tractor a couple years ago that has to be one of my ‘worst buys’. It has “I'd blame this tractor’s problems on sloppy engineering and poor workmanship.” leaked hydraulic oil from day one; the torque slips on the high side; the friction brake on the throttle comes loose about once a month; the oil pressure line wore through in three places before it was a year old; the hydraulic control lever goes down before it goes up when moved to the raise position; and the pto is ina position that, when your left foot releases the tractor clutch, your heel engages the pto, which can be very dangerous. The little Perkins engine seems to be good and sturdy. No problem there. “I'd blame this tractor'’s problems on sloppy engineering and poor workmanship.”

See this page at FARM SHOW →
Best Buy

Richard Nordal, Arborg, Manitoba · Vol. 6, No. 3 (1982), p. 11

Richard Nordal, Arborg, Manitoba: ‘‘Very satisfied with this machine,” says Richard, happy with his Coop Implements self-propelled 550 swather with a 15-ft. header and 6-cyl. engine. ‘Makes an excellent swath that’s easy to pick up with the combine, It’s also very good at picking up a lodged crop. The engine is easy on fuel as it'll swath 160 acres on 30 gallons of gas. Handling is excellent.”

See this page at FARM SHOW →
Best Buy

Oliver + 4 more

K. Joe Kinnie, Julesburg, Colo · Vol. 6, No. 3 (1982), p. 11

K. Joe Kinnie, Julesburg, Colo: ‘I have never used a product that cost me so much,” says Joe, upset with Dual herbicide by Ciba-Geigy. ‘‘We were having trouble with foxtail on a couple hundred acres of corn ground. After considering many herbicides, we chose Dual for several reasons. 1. Ciba-Geigy claimed Dual will work by itself without another mixed-in herbicide. 2. Dual was said to work exceptionally well on foxtail. 3. We were told Dual would stay in the soil longer than competitive herbicides and thus would be there to take care of weeds that came on later in the season. “Unfortunately, we had foxtail emerge six weeks after planting. Choosing Dual cost us approximately $40,000 or, on the average, 70 to 80 bushels per acre. A Ciba-Geigy representative came out but gave us no satisfaction whatsoever. The fact remains that Dual did not perform. We applied the maximum rate and used the same sprayer as with our other herbicides. Comparing the Dual acres with Lasso and Atrazine acres, it looked as though we hadn't used any herbicide at all.” Oliver Noel, St, Lina, Alberta: ‘No more dependable than a Christmas toy from Asia,” says Oliver, disappointed with his Rockwell 10-in, band saw. “In thicknesses over one inch, the blade cannot be controlled at all. The blades break frequently and alignment cannot be kept permanent. Compared to other saws, it’s junk.” He's pleased, though, with his Makita 2030 12-in. planer/jointer. “We've used it for the past year to finish and shape rough lumber for shop use. It keeps its thickness setting perfect and the motor has been 100% trouble-free.” Oliver runs a new and used tractor parts shop and says he can pick the most popular older tractors by monitoring calls for parts, ‘‘Parts calls indicate to what extent these tractors are still being used. The three most popular at this time are: 1. Case 930. 2. International Harvester 706 and 806. 3. John Deere 4020.”

See this page at FARM SHOW →
Best Buy

John Deere + 1 more

Melvin Paul, Marissa, Ill · Vol. 6, No. 3 (1982), p. 11

Melvin Paul, Marissa, Ill: “Many pickups have had my name painted on the door but I’ve never been so pleased as am with my 1981 GMC High Sierra,” says Melvin. “It’s been my ‘truck of trucks’, always performing beautifully! “T also have two great tractors that have never had a service call — a Deere 4240 and a Deere 4640, both bought in 1978. For me, green is the machine when it comes to tractors." On the negative side, Melvin has had trouble with his New Holland 775 skid steer loader. "It's with mixed emotions that complain “It’s my ‘truck of trucks’. Always performs beautifully.” about this machine because it’s as handy as having an extra hired hand and the company has been good about repairing it. But it’s had broken brackets, hydraulic breakdowns, and injector trouble on its diesel engine.”

See this page at FARM SHOW →
Best Buy

John Deere

Wayne D. Frederick, West Branch, Iowa · Vol. 6, No. 3 (1982), p. 11

Wayne D. Frederick, West Branch, Iowa: ‘‘My 700 John Deere Max Emerge planter makes it a lot easier to be a good no-tiller,” states Wayne. “I'm dedicated to no-till farming and was having trouble with my old planter. In the last five years with the Max Emerge, I have never failed to get a stand and have even had to cut back my planting rate 2,000 seeds per acre because I was getting a higher rate of germination. I have frame-mounted rather than unit-mounted coulters which lets me transfer planter frame weight to the coulters. I've been able to plant in just about anything.” Another top purchase for Wayne are his B.F. Goodrich Power Saver rear tractor tire radials. ‘We do a lot of blacktop driving in our custom work so our tires wear fast. Radials give us a smoother ride as well as better traction and longer life. This is the second set of radials on this tractor and the second tractor I have had radials on. The old set of radials had about 13,000 miles and 2,100 hours. Excellent wear and performance.” Francis Effling, Artesian, S, Dak.: “T looked at other balers and I think John Deere has the least moving parts,” says Francis, pleased with his 510 round baler. ‘When the dealer delivered the baler, he helped me get started and rode with me while making several bales. think this is extremely important in getting started right. The baler works great with my 60 hp tractor,”

See this page at FARM SHOW →
Best Buy

John Sides, Smithwick, S. Dak · Vol. 6, No. 3 (1982), p. 11

John Sides, Smithwick, S. Dak: “Our ‘best buy’ is our 1980 CJ-5 Jeep,” says John. ‘Its 258 cu. in. motor has plenty of power, starts in the coldest of weather and gets approximately 13 to 14 miles per gallon, The jeep has been used strictly in the pastures for ranch work and has been completely trouble-free. We've also been well-satisfied with our J-10 Jeep pickup. Plenty of power and economical.”

See this page at FARM SHOW →
Best Buy

White

Deland Reynolds, Bloomfield, Neb · Vol. 6, No. 3 (1982), p. 11

Deland Reynolds, Bloomfield, Neb: Deland likes his 1979 White 2-105 tractor. “Except for a loose seam ina rear tire and problems with bearings in an idler pulley, I've had no trouble in 800 hours. The seat is very comfortable, it has great visibil ity, and it’s reasonably quiet. The only thing would change is that the hood shakes, especially when the engine is holding back between 1400 and 1800 rpm's. Also, when it rains the pre-cleaner catches water that goes out the exhaust, making a mess when the tractor is started.”

See this page at FARM SHOW →
Best BuyWorst Buy

John Stevermer, Houston, Minn · Vol. 6, No. 3 (1982), p. 11

John Stevermer, Houston, Minn: His “best buy” is an Owatonna Manufacturing Co. haybine. ‘Most of our hay is harvested from narrow contour strips on steep hillsides, We are well-satisfied with the way our Owatonna 217 Haymaster cuts and conditions alfalfa. It doesn’t seem to matter if the crop has lodged a bit. The hydraulic swing tongue attachment helps maintain a full width cut on the steeper slopes.” “My ‘worst buy’ of all time is a 1645 Skilsaw chainsaw. It refused to oil the chain automatically, and always let the oil leak away onto the floor at night. We took it to the dealer several times, and sent it to the Skilsaw service center once. We finally threw it into the junk pile, and that stopped the aggravation. The dealer still feels that I am too fussy.”

See this page at FARM SHOW →
Best Buy

Greg Neave, Kelowna, British Columbia · Vol. 6, No. 3 (1982), p. 11

Greg Neave, Kelowna, British Columbia: Greg’s happy with his LongNuway 1560 travelling sprinkler. “Minimal hours are required to operate it, as it’s very simple and efficient. In 24 hours it will irrigate more acreage than most conventional systems. Has required little maintenance.”

See this page at FARM SHOW →
Best Buy

International Harvester

Doug Putnam, Pikeville, Tenn · Vol. 6, No. 3 (1982), p. 11

Doug Putnam, Pikeville, Tenn: ‘My ‘best buy’ ever is my New Idea 813 floating grain head. It won't plug up even in muddy ground and it’s the best I've ever seen work in the field.” On the minus side, “The only plus on this tractor is that it has good power,”’ says Doug about his International 1086. “I’ve had trouble with wheel seal leaks. Two torque amplifiers have gone out. I can't get it in gear and can’t keep alternators on it. Also, it's the roughest riding machine I have ever operated.”

See this page at FARM SHOW →
Worst Buy

Case

Don Anderson, Lewistown, Mont · Vol. 6, No. 3 (1982), p. 11

Don Anderson, Lewistown, Mont: “My worst buy ever was a Case 1370 2-wheel drive tractor,’ says Don. “When we bought the tractor the pto was not adjusted properly. The dealer worked on it five times in the first year and still the problem was not solved. Then, the dealer died and we didn’t get another for two years. Ex, “The entire pto clutch assembly burned out, dropping iron and pieces of clutch into the rear end.” cept when necessary we didn’t use the pto, but during spring seeding, it started to turn all the time. The new dealer told us to finish seeding and bring the tractor in, which we did. The entire pto clutch assembly had burned out, dropping iron and pieces of clutch into the rear end. One of these pieces went through the ring gear and pinion, chipping both. It also took out both final drives. Total repair bill was $15,000, “Since we had had problems with it in the first year, we felt Case should furnish us with the parts. But they said the tractor was too old at three years and had too many hours at 2,100. We traded the tractor and I'll never buy another Case product as long as I live unless the company changes its policies.”

See this page at FARM SHOW →
Best Buy

John Deere

Ralph Manternach, Cascado, Iowa · Vol. 6, No. 3 (1982), p. 11

Ralph Manternach, Cascado, Iowa: Both his “best buys” are made by John Deere. “Our 3940 chopper with electric controls has good capacity without big power requirements,” he says. “Does an excellent job chopping haylage without the dust you get when using a screen, which we don't own for it. Daily sharpening and shear bar adjustment takes 10 to 15 minutes. The knives are designed to move back if a rock or metal object is picked up. We know this feature works because we picked up a rock and it only moved back eight of the 36 knives. We lost just 45 minutes and had no expense.” ‘We have used our Deere 4440 tractor for about a year now and have had no expense other than normal maintenance. Good power and comfort. Especially like the float ride seat,”

See this page at FARM SHOW →
Best Buy

Case

Harold Waldron, Lacombe, Alberta · Vol. 6, No. 3 (1982), p. 11

Harold Waldron, Lacombe, Alberta: He's had trouble with his Case 2290 tractor. “The power train and motor are 100% but the hydraulic lines keep popping off ends. The heater hose broke in the cab and, in general, clamps on hoses were loose and bolts were not tight. The air conditioning lines were improperly installed and wore through. I've used five pails of transmission oil and one case of oil in the motor because of leaks last fall when I first got the tractor. Also, the battery cable shorted out, wrecking the alternator and one battery. Dealer service was good, but 11% to 2 days down every time you turn around is not so great.” Harold adds that he likes his XL 12 Homelite chain saw. ‘Runs good and has plenty of power for farm cutting.”’

See this page at FARM SHOW →
Best Buy

L.D. Simmons, Gray, Tenn · Vol. 6, No. 3 (1982), p. 11

L.D. Simmons, Gray, Tenn: ‘I've had some trouble with a few bales of Silver Queen baler twine. The twine kept coming out of the balls cut in two and, in one ball, the end just disappeared.”

See this page at FARM SHOW →
Best Buy

Stanley H. Vorthmann, Council Bluffs, lowa · Vol. 6, No. 3 (1982), p. 11

Stanley H. Vorthmann, Council Bluffs, lowa: “These waterers have never failed or frozen in five years,” says Stanley, pleased with his “Trojan freezeless nipple waterers. We installed them in an open front finishing floor in 1976." On the negative side, he had trouble with a Dayton 5 hp. enclosed motor. ‘Water gets into the control box when it rains and shorts out the motor. drilled a hole in the bottom but it didn’t help. My dealer replaced one motor while it was still under a one-year warranty but, when the second motor failed in the 13th month, the company rep said it would not be replaced.”

See this page at FARM SHOW →
Best BuyWorst Buy

John Deere

Mark Lusk, West Mansfield, Ohio · Vol. 6, No. 3 (1982), p. 11

Mark Lusk, West Mansfield, Ohio: “One of our ‘worst buys’ is a 1979 Ford F-350 truck with 400 motor and 4-speed transmission,”’ says Mark, “From the first day we had it, the front end shook and we got poor gas (Continued on next page.) Best And Wi mileage. We've had the front end worked on three times. The cab is like an oven in summer and like a deep freeze in winter, It's work every time you drive it.” On the “best buy” side, Mark adds that, ‘We bought a 1977 John Deere 4430 from our Deere dealer with 1,000 hours on it. Now it has 1,600 hours and we haven't had one minute of trouble. It has more horsepower than it's rated at and really like the Sound-Gard cab.”

See this page at FARM SHOW →
Worst Buy

Chevrolet

James A. Knollenberg, Oblong, IIL · Vol. 6, No. 3 (1982), p. 12

James A. Knollenberg, Oblong, IIL: “When I say ‘worst buy’ I mean it,” says James, upset with his 1981 Chevrolet 4-wheel drive pickup. “It has what GM calls an economy 305 engine but it doesn't have enough power to pull an empty gravity bed wagon. From the word go, it has used oil and I had to replace the rings, but that didn't help the oil consumption problem. Whether in 4-wheel or 2wheel drive, my best mpg has been 9.5. I haven't used the 4-wheel drive much because it doesn't have the power to pull the front tires. Last winter, when we had lots of snow and slick roads, it wouldn't even go into 4-wheel drive. My dealer said many of these trucks are this way. I wouldn't want anyone else to have the headaches and bills I have had.”

See this page at FARM SHOW →
Best Buy

Ford

Gene D. Arlt, Ritzville, Wash · Vol. 6, No. 3 (1982), p. 12

Gene D. Arlt, Ritzville, Wash: He nominates Doane’s Agricultural Report as his ‘best buy"’. ‘‘Doane’s sends out a weekly report on markets and what's going on in Washington, D.C. Besides that, they provide a reference book on management, crops, livestock, machinery, taxes, law and other topics. It's nice to have an updated reference book when you're starting a new project or need information on an old project.” George Massie, Jr., Louisa, Va.: “T'd like to nominate three products from Unverferth-McCurdy as ‘best buys’,"” says George. “I'm pleased with their 16-ft. Harrogator, which does a good job of leveling the land, their gravity flow grain box, and a set of their snap-on dual wheels. “We also like our 7600 and 4600 Ford tractors. We've had minor problems with the tractors but the dealer gives good service. However, we didn't like it when Ford went from a district parts center to a regional set-up. Before the change, the parts depot was in Richmond and the dealer could get parts overnight. Now the depot is in Atlanta and it takes two days to get parts.”

See this page at FARM SHOW →
Worst Buy

International Harvester

Warren Steeves, Carievale, Sask · Vol. 6, No. 3 (1982), p. 12

Warren Steeves, Carievale, Sask: “My nomination for ‘worst buy’ goes to my 1976 915 International diesel combine which was the highest priced on the market at the time I bought it,” says Warren. ‘‘In the first 100 feet, a piece of angle iron, improperly welded, fell out of the feeder and broke the straw chopper. Every weld on the pick-up had to be rewelded after 300 acres. The machine fan was improperly installed and it fell out, breaking the fins off. Near the end of the first season, the diesel pump went out and I was not comEy) orst Buys ge) pensated for down time. The second / season the diesel pump went out again, apparently ruining the motor - which had just 150 hours on it. International did repair it at their expense but I had to pay a custom operator to . finish the crop and the motor was not put back in until the next fall. “After three days of running again, the turbo charger went out at a cost of $800, which International would not be responsible for. The final blow came in the fall of 1981 when the rod bolts broke while combining and drove a hole through the side of the block, starting both the combine and field on fire. Extensive damage was done, One big problem through all of this is that it’s hard to get parts any closer than Winnipeg, which is a round trip of 600 miles.”

See this page at FARM SHOW →
Best Buy

International Harvester + 1 more

Herbert Heintz, Cayuga, N.Y · Vol. 6, No. 3 (1982), p. 12

Herbert Heintz, Cayuga, N.Y: “I wonder why International, with all their losses, doesn’t get smart and make the Farmall M again? At $8,000 per tractor, if it was equipped with no accessories, they could sell all they could make. If they can't afford U.S. labor, they could make them in third world countries.”

See this page at FARM SHOW →
Best Buy

W. Reinhardt, Didsbury, Alberta · Vol. 6, No. 3 (1982), p. 12

W. Reinhardt, Didsbury, Alberta: / He's happy with his Gjesdal ‘‘5 in 1” grain cleaner built by Harvey Gjesdal, Box 425, Birch Hills, Sask. ‘‘This machine is designed to run unattended and that's just what it does. If you don’t rush it, it does an amazing job. Last spring I'd start it up in the morning and go about my other work. It never once caused me trouble.”

See this page at FARM SHOW →
Best Buy

John T. Mack, Amboy, Minn · Vol. 6, No. 3 (1982), p. 12

John T. Mack, Amboy, Minn: “Heavy duty all the way,” says John, pleased with his Schweiss 8-ft. snowblower. ‘This machine is built right. The large open augers chew right into a hard-packed drift. have it on a 150 hp tractor and have yet to break the first shear bolt.”

See this page at FARM SHOW →
Best Buy

International Harvester + 2 more

Charles Kunka, Hamilton, Ohio · Vol. 6, No. 3 (1982), p. 12

Charles Kunka, Hamilton, Ohio: “We've tried just about every make of disk on the market and have found that our International gives us the best overall performance. Its great flexibility and constant depth control really do the job in our different soil types. Another key feature is its narrow transport width," “Another ‘best buy’ is our John - Deere 2800 plow. The adjustable _ width and high clearance enable us to follow the combine in cornstalks without plugging. We're also pleased with John Deere’s 336 baler with launcher. One man can fill all the wagons by himself, saving on manpower. We've had very little maintenance on it.” On the minus side, Charles says his White 253 and 263 disc harrows caused problems. ‘We had the 253 for a couple weeks, but the dealer was unable to make it level the ground correctly. So, he brought us a 263 _ which worked in a level field with no rocks, But, since some ofour ground . is rougher, we were replacing bearings and blades practically every week.”

See this page at FARM SHOW →
Best Buy

Ralph Watkins, Jordan, Minn · Vol. 6, No. 3 (1982), p. 12

Ralph Watkins, Jordan, Minn: He built a new log house and is happy with two wood-burning accessories that help him heat efficiently with wood fuel burned in his ‘‘best buy”’ air-tight Defiant cast iron stove from Vermont Castings. ‘‘Many people who burn wood have trouble regulating the heat, particularly when the weather outside isn't real cold. We use a round thermometer (22 in. x Yin. thick) which tells just how hot the:stove top is, and we regulate the temperature to match the house's call for more heat. With a little experience, you soon learn what outside temperature and wind velocity require in the way of stove-top temperature to keep the house properly heated, yet not too hot.” Watkins adds that he has made a practice of burning a 600-700" fire, with the stove wide open, every morning for 30 minutes to burn out any buildup of creosote from operating the stove on a minimum of air. A cordless Dust Buster hand vacuum, 14 in. long, “has enough suction to quickly clean up small chips, dust, and other debris that’s always present when you burn wood inside the house. It has a wall rack with transformer, and is fully recharged in a few hours after up to 5 min. of use,”’ The Dust Buster is available from most department and discount stores. The thermometer is available from Vermont Castings Co., Prince Street, Randolph, Vt. 05060.

See this page at FARM SHOW →
Best Buy

Paul Homme, Granite Falls, Minn · Vol. 6, No. 3 (1982), p. 12

Paul Homme, Granite Falls, Minn: ‘My husband just bought a “It works great and is manufactured by farmer-inventors.” Gnuse rear loader from Gnuse Manufacturing Co., in Arlington, Neb. He's really impressed. Uses it to feed silage and haul manure. It works great and is manufactured by farmerinventors!”

See this page at FARM SHOW →
Best Buy

John Deere + 1 more

Paul Boedeker, Fredericksburg, Iowa · Vol. 6, No. 3 (1982), p. 12

Paul Boedeker, Fredericksburg, Iowa: “I don’t understand how a big company could ruin a machine from one model to the next,”’ says Paul, disappointed with the John Deere 7720 combine he bought two years ago. ‘I wonder if they made changes and then didn’t follow through and thoroughly test it in the field. Terrible capacity and grain quality.” His “best buy” is his new International 1480 rotary combine. ‘Great capacity, good grain quality and fine dealer service. Should have bought it two years ago. In addition, it's outfitted with a grain loss monitor, manufactured by Dickey John, that’s a top flight investment.” W. B. Harney, Jr., Robstown, Tex.: He nominates his Krause folding disk as his ‘best buy". “The disk angle is non-adjustable so all you do is set the depth stops. It has an automatic leveling cylinder, as well as a manual adjustment. It’s well-made and does a good job of cutting out sorghum stubble. Leaves the ground level and folds up real easy to transport. Followup from Krause was good.” On the negative side, Harney’s had trouble with his Rhino offset disk. “The scraper mounting brackets were the wrong ones for the disk, When used in the field, the mounting bars would bend and lock-up the individual disks. The dealer said it was too wet but I had an International offset disk working the same field at the same time and had no problems. I built my own bar mountings out of heavy angle iron.’

See this page at FARM SHOW →
Best Buy

Emery Kleven, West Concord, Minn · Vol. 6, No. 3 (1982), p. 12

Emery Kleven, West Concord, Minn: ‘The fuel economy of this tractor compared with the same size American tractor is quite substantial. We've got 900 hours on it with no mechanical problems,"’ says Emery, pleased with his ‘‘best buy’’ Deutz.

See this page at FARM SHOW →
Best Buy

International Harvester

John Margan, Platteville, Wis · Vol. 6, No. 3 (1982), p. 12

John Margan, Platteville, Wis: “One of my best all-time buys is my International 1951 M tractor. It has always been a good purchase but it was especially so last January 10th, the day of a big storm. The thermometer said 32° below zero. The ‘M’ was the only tractor on two farms that would start. When the power went off, we ran it all night on the alternator.”

See this page at FARM SHOW →
Best Buy

Robert D. Lanier, Pleasant View, Colo · Vol. 6, No. 3 (1982), p. 12

Robert D. Lanier, Pleasant View, Colo: “I've made a decision never to buy from phone salesmen, no matter how good the deal sounds,"' says Robert, upset with phone salesmen selling small tools from so-called “salvage companies". “I've found most of the tools, such as saw blades, bearing pullers, wrenches, and so on to be of inferior quality that won't stand up to heavy use.”

See this page at FARM SHOW →
Best Buy

Norbert Chaput, St. Adolphe, Manitoba · Vol. 6, No. 3 (1982), p. 12

Norbert Chaput, St. Adolphe, Manitoba: “‘It's lightweight enough so can cut wood for hours without tiring, even though I'm 69 years old,” says Norbert, pleased with his Princess P-41 chainsaw with a 16-in. bar. “Dependable and easy enough on fuel. Easy to start even on the coldest days, and powerful. Can cut dry hardwood trees two to three feet across without any trouble."’

See this page at FARM SHOW →
Worst Buy

Ford + 1 more

Richard Templen, Solderis Grove, Wis · Vol. 6, No. 3 (1982), p. 12

Richard Templen, Solderis Grove, Wis: “Our Ford pickup jumps out of ‘park’ into reverse when running or with the motor shut off,"’ says Richard about his “worst buy”. “Ford now sends out stickers recommending that you set the emergency brake. We have had two close calls with this problem.” Richard's pleased with his Case 390 tractor. “It has an abundance of power, easy shifting because of the power shift, and good visibility from the cab along with a smooth ride. Our dealer is extremely reliable and fast on any and all service calls!"

See this page at FARM SHOW →
Best Buy

Ford

Clifford T. Moore, Eldon, Iowa · Vol. 6, No. 3 (1982), p. 12

Clifford T. Moore, Eldon, Iowa: “Most newer cars are not made for someone over 6 feet tall so my wife and find ourselves using it as an automobile more and more,"’ says Clifford about his “best buy” 1981 Ford 150 pickup with a 6-cylinder engine and 4-speed transmission. “I've been pleased with the mileage at about 20 mpg. However, it is short of power in low gear.”

See this page at FARM SHOW →
Worst Buy

John Deere

Dave Tobiason, Scotch Grove, Iowa · Vol. 6, No. 3 (1982), p. 13

Dave Tobiason, Scotch Grove, Iowa: ‘‘Not a typical John Deere product,” says Dave, disappointed with his “worst buy” John Deere 450 grain buggy. “The welds came loose and the chain broke along with the shafts. Very undependable."’ On the plus side, he’s happy with his Deere 4440 tractor. ‘Plenty of power and easy to work on. In fact, this is our second one and it works as well as the first, which is still in use on our farm.” Charllie Gerthofer, Jr., Ladysmith, Wis.: “it keeps the house cozy and warm with lower humidity than our fuel oil heater. Besides, who wants to support the Arabs with their outrageous prices when there’s lots of dying of elm trees around,” says Charlie, pleased with his Ashley 15-H wood heater. “We went through two rear ends, it has no traction, and it smokes all the time.”

See this page at FARM SHOW →
Worst Buy

Ford + 2 more

Bill Duckworth, Epps, La · Vol. 6, No. 3 (1982), p. 13

Bill Duckworth, Epps, La: ‘This feeder and conveyor is a joke,” says Bill, disappointed with his ‘‘Harvestore ‘Super Shuttle’ feeder and 105 conveyor. They were built cheap and sorry. The feeder had a tendency to disintegrate from time to time, and the chains break constantly in the conveyor. When they break, it takes half a day to dig them out, straighten them and put it back together. Extremely bad buy.” Bill says another “worst buy" was a 360 cu. in. engine in his Ford truck. “The 360 engine was designed wrong and Ford knew it. They extended the warranty 30 months but waited until the 30. months were up before sending a letter to inform us. After buying eight trucks and cars and two tractors from them in the last 10 years, we felt this was a lousy way to treat us. After three years of blown head gaskets, extreme oil consumption, water in the oil, and very little power, we replaced the engines at our own expense. Very little we can do but tell other people,” On the positive side, Bill's pleased with his Farmhand grinder-blower. “This machine has to be the most rugged-built and simplest grinder ever. We have ground over 10,000 bushels of milo and 5,000 bushels of oats with no problems, It has never plugged up, which I couldn't say about the grinder it replaced. Truly a peasure to operate.” Another good buy was his John Deere Max-Emerge 7100 planter. influenced my decision to buy a Max-Emerge,” says Bill. “It has the best seed depth control on the market, is well-built and easy to service. We have planted 400 acres with only minor problems.” Andy Pomerleau, St. Paul, Al‘berta: “This swather is more than a match for any of the hydrostatic swathers on the market today," says Andy, happy with his 1967 New Holland 905 swather with conditioner. ‘‘The flotation draper header cleans obstructions very well and is built to withstand lots of wear and tear. A dream to handle. I look forward to using it each year."

See this page at FARM SHOW →
Best Buy

Jim Solheim, Garretson, S. Dak · Vol. 6, No. 3 (1982), p. 13

Jim Solheim, Garretson, S. Dak: ‘I was not happy with my Snowco 55foot grain auger,” Jim told FARM SHOW. “It bows like a horse shoe when cranked up high for wet corn. The bolts on the gearbox have to be tightened often and there is no place to check oil in the gearbox.” Don Savjord, 100

See this page at FARM SHOW →
Best Buy

Don Savjord, 100 Mile House, British Columbia · Vol. 6, No. 3 (1982), p. 13

Don Savjord, 100 Mile House, British Columbia: ‘‘Does anyone manufacturer a good double rake?" Don asks, dissatisfied with his “Rossi double “V" rake. This is a 3-pt. hitch rake used to pull together two swath rows of hay. The steel frame is continually bending and breaking. Even though the bearings were greased religiously, they wore out almost immediately.” K On the other hand, Don likes his Forrester round bale hauler. “It's hydraulically operated with no chains to wear out. It picks up and hauls bales very quickly and easily. I have also used it to pick up and move a machinery shed, lick tanks and bridge beams. A few small things had to be reinforced but I was reimbursed by the company.”

See this page at FARM SHOW →
Best Buy

Echo + 1 more

Dennis R. Teubel, Alva, Okla · Vol. 6, No. 3 (1982), p. 13

Dennis R. Teubel, Alva, Okla: Dennis nominates his Echo chain saw as “best buy”. “Four years ago bought an Echo 452 VL and, except for a spark plug and chains, have put hardly any parts in it. Because I liked the vibrator-less handle and the allaround performance of the saw, bought a John Deere 28, which is made by Echo and it has also been a good saw. Now I've bought an Echo 280E for trimming brush and it’s a good saw, too.”

See this page at FARM SHOW →