Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 19, No. 2 (1995)

Best & Worst Buys: FARM SHOW Vol. 19, No. 2 (1995)

66 reports from pages 14–16 · 58 Best Buys12 Worst Buys · See everything in this issue at FARM SHOW →

Best Buy

John Deere + 1 more

Michael Mechem, Clarion, Iowa · Vol. 19, No. 2 (1995), p. 14

Michael Mechem, Clarion, Iowa: Michael says he wouldn’t run a Deere Maximizer combine without a Schwerin concave and finger grate like the one he installed for harvest last fall (Schwerin Concaves, Inc., Rt. 5, Box 314A, Walla Walla, Wash. 99362 ph 800 468-1888 or 509 525-7556). “We bought a Deere 9500 Maximizer a few years ago and all we ever did was grind grain and put it out the straw walkers. Deere factory reps and our local dealer worked and worked to remedy the problem with no success. The Schwerin concave made a dramatic difference, and we're extremely pleased. We've got more capacity, no grain loss, and no more ground grain.”

See this page at FARM SHOW →
Best Buy

International Harvester 810 + 1 more

Harry Byrd, Hazlehurst, Ga · Vol. 19, No. 2 (1995), p. 14

Harry Byrd, Hazlehurst, Ga.: “The tungsten-coated sickle knives from Mid-Continent Mfg., Colby, Kan., that I installed on my IH 810 platform about five years ago qualify as my best buy, They wear very slowly and seem to maintain a sharp cutting edge as they wear, just as advertised. None has ever broken, though one jumped out of a guard one time. “My 1987 Poulan 2800 chainsaw is my worst buy. The engine wore out completely after five winters of cutting firewood and cleaning fencerows. I got $25 in trade on a Husqvarna from the same dealer I bought it from.”

See this page at FARM SHOW →
Worst Buy

Harold Crooks, Spearman, Texas: Harold’s worst buy is the Hesston 5580

Harold Crooks, Spearman, Texas · Vol. 19, No. 2 (1995), p. 14

Harold Crooks, Spearman, Texas: Harold’s worst buy is the Hesston 5580 round baler he bought new in 1982. “I’ve kept in shape getting off the tractor to thread twine through the double twine arms, cut the twine when the knives didn't, straighten twisted belts, replace broken axles, put on extra idler sprockets to keep the long chain from flopping off, and unplugg the pickup fingers. The only good thing about it is I've only had to replace the bearings on one belt roller.”

See this page at FARM SHOW →
Best BuyWorst Buy

New Holland 630 + 1 more

Donald Sears, Carlisle, Ky · Vol. 19, No. 2 (1995), p. 14

Donald Sears, Carlisle, Ky.: “The worst buy I ever made was my New Holland 630 round baler that I bought new in 1990, Both outside belts would always run up on top of the inner belts. I changed all the belts and that still didn’t help. Finally, aroller swallowed one of the belts and that was the straw that broke the camel's back. I'd had the machine only five days and had worked on it four of them. So I loaded it up, took it back to the dealer about 35 miles from here, and told him I'd have it fixed or I'd have my money back. He gave me my money back. “The next day, I bought a new Deere 375 baler, which is one of my best buys. It’s been trouble-free, runs quiet, and looks great.”

See this page at FARM SHOW →
Best Buy

Thomas Wessman, Albert City, Iowa: Thomas didn't believe a friend who

Thomas Wessman, Albert City, Iowa · Vol. 19, No. 2 (1995), p. 14

Thomas Wessman, Albert City, Iowa: Thomas didn't believe a friend who told him if he ever bought a Smidley hog waterer he'd never use another brand, but he says he found out his friend was right. “T've always used Ritchie waterers which are difficult to fix because they’re hard to get into. The Smidleys are simple and easy to repair.”

See this page at FARM SHOW →
Best Buy

John Deere 3835

Mark Stupfel, St. Paul, Ore · Vol. 19, No. 2 (1995), p. 14

Mark Stupfel, St. Paul, Ore.: Mark's pleased with the Deere 3835 3-bottom switch plow he bought new in 1993, “It does a good job of covering crop residue in ground that’s been disked first. It seems to break up the soil more than a moldboard plow. In tough plowing conditions I can change the bottoms from a wide cut down to a 14-in. wide cut. Also, the plow’s so light my small tractor can lift it.”

See this page at FARM SHOW →
Best Buy

Clark Jensen, Bennet, Neb

Clark Jensen, Bennet, Neb · Vol. 19, No. 2 (1995), p. 14

Clark Jensen, Bennet, Neb.: “Dad's 1979 TH 1086 tractor is a definite best buy at our place. It’s our main tillage tractor and, even with 5,100 hours on it, the only thing we've ever had to do to the engine was to replace a water pump. The tractor starts at 5 degrees F, the engine has excellent power and torque and doesn’t smoke, and it doesn't use over 5 gals. of fuel an hour. It would be hard, I think, for a newer tractor to measure up to this one.”

See this page at FARM SHOW →
Best Buy

Billy V

Billy V. Stewart, Brownwood, Texas · Vol. 19, No. 2 (1995), p. 14

Billy V. Stewart, Brownwood, Texas: Billy's “best buy” is a Miller “Legend” welder he bought new in 1994, “It’s the quietest and most dependable welder I've ever owned, It will easily handle any size rod and the generator will perform at idle speed, which is a great plus to me. I'd recommend this welder to anyone and would buy another one in a minute.”

See this page at FARM SHOW →
Best Buy

Ford F-250

Alex Chisholm, Auburn, Ontario · Vol. 19, No. 2 (1995), p. 14

Alex Chisholm, Auburn, Ontario: A 1979 Ford F-250 3/4-ton 4-WD pickup heads Alex’s “best buys” list. “It has almost 350,000 miles on it and it still looks and runs great. I put in a 400 cu. in. rebuilt engine at just over 180,000 miles and rebuilt the 4-speed transmission twice, Last year, I had to rebuild the positraction, This truck has been worked hard - [even skid logs with it. It can outpull any tractor up to 65 hp.”

See this page at FARM SHOW →
Best Buy

Justin Schafer, Portland, Ind

Justin Schafer, Portland, Ind · Vol. 19, No. 2 (1995), p. 14

Justin Schafer, Portland, Ind.: Justin likes the heavy-duty design of his 1994 Dixie-Chopper zero-turn mower equipped with a 50-in. deck and 20 hp Kohler engine. “My only complaint is that it leaves two rows of grass slightly uncut between the center blade and right hand and left hand blades in damp, heavy grass. The center blade should be moved forward a little so the outside blades can overlap it for a cleaner cut.”

See this page at FARM SHOW →
Best BuyWorst Buy

Ford 8730 + 2 more

David Proden, Ladysmith, Wis · Vol. 19, No. 2 (1995), p. 14

David Proden, Ladysmith, Wis.: A 199] Ford 8730 tractor and a 1993 Deere discbine are two of David's best buys. “The tractor has a transmission that’s a dream to shift and the cab is comfortable and quiet. The discbine is a dandy. I can go as fast as I want, and the impellers dry hay just as good as rollers or better. “My worst buy was a New Holland Hydro haybine that I bought new in 1993 for $14,000. I used it to cut 130 acres of hay and couldn’ t keep it from plugging up. My dealer tried to fix it but couldn't. He called experts at New Holland who came out one day and told me the machine wouldn't cut my hay but couldn't figure out why, They were prepared to give me my money back, but apparently some of the company brass thought differently. had to keep after the company - one official even had me investigated for some reason - for nine weeks before I got my money. Then, I got only $13,500 back because, the company argued, I'd cut hay with the machine. That's the last piece of New Holland equipment I'll ever buy.”

See this page at FARM SHOW →
Best BuyWorst Buy

Toyota 4-WD + 1 more

Jim Haines, Bremen, Ind · Vol. 19, No. 2 (1995), p. 15

Jim Haines, Bremen, Ind.: Jim says the best piece of equipment he’s purchased in 40 years of farming is his 1989 Toyota 4-WD pickup. “I’ve put 90,000 miles on this pickup, most of them on our farm or on “It won't start when it gets below 40°, even if we use ether.” our hunting preserve, and all we've ever done to it is replaced the front brakes and kept it lubed. “My worst buy is my Deere 2750 tractor. It won't start when it gets below 40 degrees, even if we use ether. All I can do is hope for the best and expect the worst.”

See this page at FARM SHOW →
Best Buy

Richie J

Richie J. Gess, Fort Atkinson, Wis · Vol. 19, No. 2 (1995), p. 15

Richie J. Gess, Fort Atkinson, Wis.: “A 1993 Packard Bell multi-media computer is our best buy, We use Microsoft software and also bought a program from Pioneer. We’re finally nailing down our income and expenses.”

See this page at FARM SHOW →
Best Buy

White 2120 + 1 more

William Ries, Castor, Alberta · Vol. 19, No. 2 (1995), p. 15

William Ries, Castor, Alberta: William's “best buy” is a 1988 White 2120 tractor equipped with front wheel assist and White front-end loader. “We use this tractor every day in the winter to load silage and round bales. The Cummins diesel engine starts easily in cold weather, and is fuel efficient. The tractor has been trouble-free for 2,200 hours, as has the White loader,”

See this page at FARM SHOW →
Best Buy

Paul D

Paul D. Morrow, Clarksville, Tenn. · Vol. 19, No. 2 (1995), p. 15

Paul D. Morrow, Clarksville, Tenn.: “This is the first new GM product I’ve owned in 40 years and I’m very pleased with it,” says Paul about his 1993 Sonoma pickup equipped with a 4.2 liter V-6 engine, automatic overdrive transmission, power steering, power brakes, power windows, air conditioning, and cruise control. “It has a lot of power and is fuel efficient. It's given me 19,000 miles of trouble-free driving.”

See this page at FARM SHOW →
Best Buy

John Deere + 1 more

Walter Bockwaldt, La Moure, N. Dak. · Vol. 19, No. 2 (1995), p. 15

Walter Bockwaldt, La Moure, N. Dak.: “Deere set farming back about 40 years when they came out with the 730 air disc drill, I bought one in 1993 and found it leaves an uneven seedbed and does a very poor job of packing soil around seed. “My best buy is my 1993 Case IH 9270 4-WD tractor. It’s quiet, easy on fuel and has a lot of power. The power shift transmission is a dream come true. This is a tractor you can put any hired man or kid on and not worry about them hurting it.”

See this page at FARM SHOW →
Worst Buy

Paul Klingenborg, Parkersburg, Iowa: “Sowjoy farrowing crates and nurs

Paul Klingenborg, Parkersburg, Iowa · Vol. 19, No. 2 (1995), p. 15

Paul Klingenborg, Parkersburg, Iowa: “Sowjoy farrowing crates and nursery decks equipped with flushpans are well-made and functional. They do everything they're supposed to do. Also, the people at the company are knowledgeable and very helpful. “Our Schuld-Bushnell 17-ton welded bulk feed bin is our worst buy. The main problem is that it’s not built heavy enough. The side panels wrinkle under load. The legs are off center for the bolt hole pattern. The company is totally unconcerned about our problems with its product.”

See this page at FARM SHOW →
Best Buy

Daniel Gillen, New Richland, Wis

Daniel Gillen, New Richland, Wis · Vol. 19, No. 2 (1995), p. 15

Daniel Gillen, New Richland, Wis.: “On a scale of one to 10, this is a ‘10° for farm equipment,” says Daniel, pleased with the “Agri-Speed” automatic wagon hitches (Bergman, Mfg. Inc., Box 82, Arthur, Iowa 51431) he uses on four chopper boxes. No hydraulics or 3-pt. hitch is required to activate the hitch. “We've used them for two seasons making 350 acres of alfalfa and 100 acres of corn silage a year. These hitches easily save up to one hour a day and countless trips getting on and off of equipment. They're built to work hard and last, plus the company is great to do business with.”

See this page at FARM SHOW →
Best Buy

John W

John W. Elias, Standard, Alberta · Vol. 19, No. 2 (1995), p. 15

John W. Elias, Standard, Alberta: John's happy with his 1994 Hesston 8100 SP swather equipped with a 30-ft. shiftable table, but says it could use a few improvements. “I'd like to see foot-controlled height adjustments for the table and reel drop, as well as side-to-side flotation so the table corners don’t dig in when crossing ditches. Otherwise, the swather is comfortable, easy to operate, cuts well, lays a good swath, and has adequate power and good fuel economy.”

See this page at FARM SHOW →
Worst Buy

David Rudy, Warwick, N

David Rudy, Warwick, N.Y · Vol. 19, No. 2 (1995), p. 15

David Rudy, Warwick, N.Y.: “My worst buy was my Deutz-Fahr KH 500 17-ft. folding tedder that I used in the past. It uses knuckle-pin drive on the arms and the pins were always breaking and the knuckles cracking. I bought new ones but they broke, too. I welded the knuckles to provide a harder surface, but it didn’t help. Finally, I disconnected the two swing arms and the tedder worked. Trouble was, I could pick up only one row ata time, The factory should have kept my tedder, put it out on their front lawn, and planted flowers around it,”

See this page at FARM SHOW →
Best Buy

Chevrolet

Douglas White, Unity, Sask · Vol. 19, No. 2 (1995), p. 15

Douglas White, Unity, Sask.: “It's by far the best pickup I’ ve ever owned,” says Douglas about his 1985 Chevrolet Wrangler 1/2-ton pickup equipped with 305 cu. in, engine, “It gets about 23 mpg on the highway and has excellent performance. “My worst buy was a 1980 Deutz DX 160 tractor that I purchased in Sept. 1988. It's especially discouraging because I've been such a die-hard Deutz customer. When the transmission went out on it, I decided to trade up two models, to a new 7145, rather than repair it. I thought that Deutz would have solved their transmission problems by then. However, I learned recently that the transmission in my 7145 is basically the same as in the old DX 160, which had a lot of problems, I haven't had trouble with the 7145, but I'm very skeptical about how long its transmission will last. So I wrote to Deutz and asked for a commitment from them to pay for most or all of the repair costs if the wansmission on this tractor fails, too. They refused. If the company doesn’t care to stand behind its product, especially with a problem that should have been corrected by the time the 7145 came out, that’s fine by me. But my next tractor won't be a Deutz, as the last five have been. Also, the tractor caught fire last summer due to a design flaw. An electric wire was crowded around a sharp corner and wore through, causing a short that started the fire.”

See this page at FARM SHOW →
Best BuyWorst Buy

New Holland 310 + 1 more

Allan Beatty, Richland Center, Wis · Vol. 19, No. 2 (1995), p. 15

Allan Beatty, Richland Center, Wis.: Allen's disappointed with his New Holland 310 baler. “The first year I had to replace bearings and belts, After that, repairs got more expensive. I understand they’ve improved this baler. But for the same money I could have bought a Deere 336 baler and saved myself all the headaches.”

See this page at FARM SHOW →
Best Buy

Robert Troxel, Mount Vernon, Mo

Robert Troxel, Mount Vernon, Mo · Vol. 19, No. 2 (1995), p. 15

Robert Troxel, Mount Vernon, Mo.: “Since I last wrote to FARM SHOW to nominate my Jamestown wood pellet stove as a best buy, I’ve come to the conclusion it was really my worst buy in many years.. one thing, the stove is overrated at 4,800 sq. fl, heating capacity; it'd have to work hard to heat 2,400 sq. ft. Maintenance on the stove is difficult and must be done often - including tearing the stove’s burning chamber completely apart after every ton or so of pellets and cleaning it thoroughly with a long-handled bottle brush and vacuum cleaner. My dealer refused to take the stove back but did help me sell it outright for half price to another party. I felt fortunate to get that. The lesson to be learned here is never purchase a pellet stove until you learn how to operate it, how much fuel it burns, and how often you have to clean it.”

See this page at FARM SHOW →
Best Buy

John Deere 7200

Tim Broer, Iowa Falls, Iowa · Vol. 19, No. 2 (1995), p. 15

Tim Broer, Iowa Falls, Iowa: Two Mirafount energy-free hog waterers rank as Tim’s best buys. “You can put hot water in them before dark if it’s going to get really cold at night and they stay thawed all night. They work like a big thermos jug. The electrical savings is nice, “The heavy duty planter markers on my Deere 7200 Max Emerge were not engineered too well. The frame to support them “] put five new clutches in it. Turns out the pressure plate was warped.” is inadequate, as are the bolts that hold the telescoping portion of the marker. In addition, shear bolts work loose all the time.”

See this page at FARM SHOW →
Best Buy

Westfield

Dowayne Brigham, Litchfield, Mich · Vol. 19, No. 2 (1995), p. 15

Dowayne Brigham, Litchfield, Mich.: Dowayne’s worst buy is his Belarus 420A tractor. “I put five new clutches in it. Turns out the pressure plate was warped. The company sent new parts, but I was supposed to have them machined down to make them fit. I finally gave up.” Among Dowayne’s best buys: a Westfield auger with swing hopper that’s “well-made and easy to use.”

See this page at FARM SHOW →
Best Buy

John Deere 750

Robert Williams, Morral, Ohio · Vol. 19, No. 2 (1995), p. 15

Robert Williams, Morral, Ohio: “My 1994 Deere 750 drill is built strong and works great for no-till. I plant at 7 to 9 mph and this drill puts the seed exactly where I want it. The only problem I've noticed is that you have to change the location of the openers over the rows on 30in. spacings to keep the gauge wheels from hitting stalks and inhibiting population in rows. It shows in the operators manual what openers to change.”

See this page at FARM SHOW →
Worst Buy

Massey Ferguson 3680

Ronald Wyatt, Tahoka, Texas · Vol. 19, No. 2 (1995), p. 15

Ronald Wyatt, Tahoka, Texas: Ronald's best buy is his 1988 Miller Matic 200 wire welder, “It does a superb job of welding and requires very little upkeep.” A 1991 Massey 3680 4-WD with front wheel assist heads the list of Ronald’s worst buys. “The front differential went out twice. I've had to overhaul the engine. It overheats. The brakes are hydraulic and keep getting dirt in them, And there are many other little things that keep going wrong.”

See this page at FARM SHOW →
Best Buy

Ford

Ed Staudt, Vibank, Sask · Vol. 19, No. 2 (1995), p. 15

Ed Staudt, Vibank, Sask.: The only complaint Ed has about his 1988 Ford Ranger XLT equipped with a V-6 engine, 5-speed manual transmission, air, condiUioning, cruise control and tilt steering wheel, is that he doesn’t get to drive it enough. “It has over 98,000 miles on it and all it’s ever needed was regularly scheduled maintenance and tires, It handles great and consistently gets me 28 mpg. I only wish my wife wouldn't always use it so I could drive it more,”

See this page at FARM SHOW →
Best Buy

Ford

Edward Tomlinson, Marion, Va · Vol. 19, No. 2 (1995), p. 15

Edward Tomlinson, Marion, Va.: A 1994 4630 Ford equipped with shuttle shifl transmission is one of Ed’s best buys. “The tractor has a lot more power than the 4610 I traded for it and it’s easy to get on and off. The transmission is extremely smooth, but may be a bit too noisy for some.”

See this page at FARM SHOW →
Worst Buy

John Deere

Louis Ehlers, Sedgwick, Kan · Vol. 19, No. 2 (1995), p. 15

Louis Ehlers, Sedgwick, Kan.: “The Kennametal Slicer furrow openers I bought for my Deere MaxEmerge 7200 are my worst buy. They’re supposed to keep the furrow open until seed drops to the bottom, but all they do is pack soil between the two opener disks. My 7200, which is one of my best buys, wouldn’t plant corn with the Slicers. I spent hours trying to make them work and finally took them off after planting only three acres.”

See this page at FARM SHOW →
Best Buy

Urban Snyder, Storm Lake, Iowa: “We're more than satisfied with the 40

Urban Snyder, Storm Lake, Iowa · Vol. 19, No. 2 (1995), p. 15

Urban Snyder, Storm Lake, Iowa: “We're more than satisfied with the 40 by 17 by 16-ft. Lester pole building we put up in 1991 to use for a shop. It’s as sturdy as the Lester building we put up in 1976. The only trouble we ever had with that one was some loose tin on the roof, which was taken care of by the company as soon as called them.”

See this page at FARM SHOW →
Best Buy

John Deere 30-ft + 1 more

Melvin Simpson, Santanta, Kan · Vol. 19, No. 2 (1995), p. 16

Melvin Simpson, Santanta, Kan.: A 1989 Deere 30-ft. disc and a 1990 7130 Case IH 4-WD tractor are two of Melvin's best buys. “We haven't had to replace a single gang bearing on the disc. The tractor is easy on fuel, is easy to drive and has good visibility, We've only had two minor problems with the tractor in the 4,000 hours we've worked it and both problems were quickly taken care of by our dealer.”

See this page at FARM SHOW →
Best Buy

Case IH 600

Richard Backland, Kandiyohi, Minn. · Vol. 19, No. 2 (1995), p. 16

Richard Backland, Kandiyohi, Minn.: “My 1993 Meyer TS55 618 forage wagons and 1992 Case IH 600 forage blower are the perfect combination for my operation, The wagons operate smoothly with no clumping or piling of silage when unloading because they are variable speed augers instead of beaters. The blower moves material up the silo as fast as you can unload it. We have a 90 hp tractor on the blower and when I'm in a hurry, I can unload an 18-ft. load of corn silage in 2 to 3 min. If I'm not in a hurry I can start unloading haylage or silage and go feed calves without worrying if the equipment’s going to plug.”

See this page at FARM SHOW →
Best Buy

Alberta Savage, Kellogg, Iowa: “One of our worst buys was a Bryan wood

Alberta Savage, Kellogg, Iowa · Vol. 19, No. 2 (1995), p. 16

Alberta Savage, Kellogg, Iowa: “One of our worst buys was a Bryan wood-burning outside furnace that one of your “The wagons operate smoothly with no clumping or piling of silage when unloading.” readers recently listed as a best buy in FARM SHOW. The people selling them told us they had all the pipes, baffles, etc., to install the furnace and would help in any way, But they wouldn't even return our phone calls. So we had our L.P. furnace man do the work, and ended up with over $3,000 in installation expenses,”

See this page at FARM SHOW →
Best Buy

Chevrolet 4-WD

Robert Northey, Red Deer, Alberta · Vol. 19, No. 2 (1995), p. 16

Robert Northey, Red Deer, Alberta: An E-Kay self-propelled auger mover kit from E-Kay Enterprises, Sedgewick, Alberta, heads the list of Robert's best buys, “We installed the E-Kay mover on a 7-in, dia. by 45-ft. long auger. The kit drives the augers wheels, allowing one person to easily move it around - even through deep snow or uneven ground. A hydraulic motor operates the auger’s lift winch, so there’s no more hand cranking. A hydraulic cylinder lifts the auger throat up and down making it easier to enter grain bins, It also has a hydraulic outlet that runs our drag auger.” On the negative side, Robert's not happy orst Buys yious page with the peeling paint on his 1987 Chevrolet 4-WD pickup, “Our local G.M. dealership could care less about it, even knowing it was G.M.’s lack of quality control that caused the problem.” orst Buys yious page with the peeling paint on his 1987 Chevrolet 4-WD pickup, “Our local G.M. dealership could care less about it, even knowing it was G.M.’s lack of quality control that caused the problem.”

See this page at FARM SHOW →
Best Buy

John Kelly, Tucson, Ariz

John Kelly, Tucson, Ariz · Vol. 19, No. 2 (1995), p. 16

John Kelly, Tucson, Ariz.: A 1994 Belarus 250 AS qualifies as one of John’s best buys. “It’s an inexpensive plain tractor that costs just a little more than used 30-year-old junkers. The gearing and engine hp is well suited to my needs - mowing, light plowing, and roto tilling. It has needed a few minor repairs like tightening the steering wheel and rewelding a broken 3 pt hitch stay chain.”

See this page at FARM SHOW →
Best Buy

Eugene Sellers, Trout Run, Pa

Eugene Sellers, Trout Run, Pa · Vol. 19, No. 2 (1995), p. 16

Eugene Sellers, Trout Run, Pa.: “Our 1981 Volkswagen diesel pickup is a best buy. It’s still in daily service with 192,000 miles on it. I wouldn't be afraid to start for California with it tomorrow. If the fuel tank was full when I did, I would be over 700 miles west of here by the time I had to refuel.”

See this page at FARM SHOW →
Best Buy

Ford 1620

Steve Kuntz, Park, Kan. · Vol. 19, No. 2 (1995), p. 16

Steve Kuntz, Park, Kan.,: Steve's best buy is a Ford 1620 compact tractor with front wheel assist. “It has a good diesel engine and hydrostat which work well for my small lawn rototilling business. At the same time, the tractor has plenty of power to feed a large round bale to my cows.”

See this page at FARM SHOW →
Best Buy

Robert Johnson, Canyon, Texas: A DR Trimmer/Mower from Country Home Pr

Robert Johnson, Canyon, Texas · Vol. 19, No. 2 (1995), p. 16

Robert Johnson, Canyon, Texas: A DR Trimmer/Mower from Country Home Products, Charlotte, Vt., heads Robert's list of best buys. “Powered by a 5 hp Quantum engine, this mower uses heavy 155 mm. string instead of a blade for mowing a 22-in. swath. It trims along fences like a weed eater, goes through growing pig weed like a sickle, and cuts wet grass better than a blade. Crankshaft-bending obstacles have no effect on it.”

See this page at FARM SHOW →
Worst Buy

Bryan Davis, Derby Line, Vt

Bryan Davis, Derby Line, Vt · Vol. 19, No. 2 (1995), p. 16

Bryan Davis, Derby Line, Vt.: “I made my worst buy ever nine years ago when I bought a Madison silo. Last August, the silo, which was full of first and second cut alfalfa, fell over like a tree sawed off at the bottom. So after nine years of payments on the silo I have nothing to show for it. I lost not only the silo, but my silo unloader was also destroyed, along with the feed room, a conveyor, part of the hay storage barn, and a big percentage of 400 tons of feed. On top of all that, it cost me almost $3,000 to clean up the mess. “Before it fell, the cement staves and hoops appeared to be in excellent condition. The silo sat on a flat and solid foundation. It stood straight and wasn’t leaning or twisted. The moisture content of the feed was 67% so the feed wasn’t wet or heavy enough to cause undue pressure on the silo. “Madison Silo Co. and its insurance company can’t tell me why the silo collapsed.”

See this page at FARM SHOW →
Best Buy

Ram 3/4-ton

Richard Witkovsky, Caro, Mich. · Vol. 19, No. 2 (1995), p. 16

Richard Witkovsky, Caro, Mich.: “We're very pleased with our 1991 Dodge 3/4-ton pickup with Cummins diesel engine. We like its pulling and handling abilities as well as fuel economy, We pulled a 26-ft. travel trailer through Ohio, Pennsylvania, New York and Canada - 1,800 miles, altogether - and got almost 18 mpg.”

See this page at FARM SHOW →
Best Buy

Gordon Corn, Hendersonville, N

Gordon Corn, Hendersonville, N.C · Vol. 19, No. 2 (1995), p. 16

Gordon Corn, Hendersonville, N.C.: “My best buy is a Mitsubishi MT250D tractor bought new in 1987. It’s done much heavier work than it was designed “This string trimmer-mower goes through pig weed like a sickle. Cuts wet grass better than a blade.” to do. I pull two moldboard plows at 14in. deep and subsoil 28 to 30-in. deep and the tractor takes it in full stride. It has plenty of power and a wide selection of road and ground speeds, thanks to a 9speed transmission, It’s been trouble-free.”

See this page at FARM SHOW →
Best Buy

Bill Sardone, Old Bridge, N

Bill Sardone, Old Bridge, N.J · Vol. 19, No. 2 (1995), p. 16

Bill Sardone, Old Bridge, N.J.: “My best buy is a Belarus tractor I bought through Northern Hydraulics. The tractor is great. Very inexpensive compared to American-built models. The battery compartment is the only problem. Maintenance is difficult on batteries when you have a front-end loader attached.”

See this page at FARM SHOW →
Best Buy

Bob Grove, Urbana, Ill

Bob Grove, Urbana, Ill. · Vol. 19, No. 2 (1995), p. 16

Bob Grove, Urbana, Ill.: “I'm pleased with a combine reel enlargement kit I bought last year from Reel Mfg. & Sales (Rt. 1, Box 132, Stonington, Ill. 62567). [read about it in FARM SHOW. When I cut millet it fed right through without wrapping on reel ends like before. And there was no carryover of bean stems on the reel. Ican see better now and it reaches out in front of the platform further.” $3,000 to clean up the mess. “Before it fell, the cement staves and hoops appeared to be in excellent condition. The silo sat on a flat and solid foundation. It stood straight and wasn’t leaning or twisted. The moisture content of the feed was 67% so the feed wasn’t wet or heavy enough to cause undue pressure on the silo. “Madison Silo Co. and its insurance company can’t tell me why the silo collapsed.”

See this page at FARM SHOW →
Best Buy

Oregon + 1 more

BettyAnn Bakos, Denio, Oregon · Vol. 19, No. 2 (1995), p. 16

BettyAnn Bakos, Denio, Oregon: “Our 1992 Hesston 1320 swatherwindrower is a wonderful, reliable machine that’s a joy to use. It effortlessly out-does our Hesston 6600 swather. No down time, “Another best buy is our 1994 ProAg bale scoop. It’s simple to use and reliable and a perfect fit with 750 to 800 Ib, square bales. Makes an easy one-man operation out of clearing fields. “One product we're extremely dissatisfied with is our 1992 New Holland D1000 square baler. It's a $40,000 machine that needed 10 service calls to produce a total of 5,000 bales in three years. The dealer was helpful but the factory would not stand behind this poorly engineered product.”

See this page at FARM SHOW →
Best Buy

Dick Bahensky, St

Dick Bahensky, St. Paul, Neb · Vol. 19, No. 2 (1995), p. 16

Dick Bahensky, St. Paul, Neb.: “One of my best buys over the years has been 4-way drying systems from Sukup Mfg. Co., Sheffield, Iowa. I now own two Sukup systems with auto dry computerized grain monitor controllers. They remove moisture from grain with the least labor and upkeep of any system I’m aware of on the market today. I bought my first one in 1970 and then two more in 1983. They've improved the quality over the years. Sukup is family-owned. Service is personal and the quality of workmanship superb,”

See this page at FARM SHOW →
Best Buy

John Deere

Sylvester Huse, Warnerville, N.Y · Vol. 19, No. 2 (1995), p. 16

Sylvester Huse, Warnerville, N.Y.: Heading his “best buy” list is a Deere AMT 600 4-WD 5-wheel utility vehicle. “We bought it about a year ago to help manage grazing of our 100 plus beef brood cows. We affectionately call it our green horse. From May to about Christmas, the AMT carried temporary fence supplies daily. It is possible to get it stuck but you really have to try. A friend says it works like a hovercraft. My son and wife complained that they could never get their hands on it because I had it so much, so we bought another one to use this year. “There are some problems with the AMT, however. It starts poorly in cold weather. And it’s underpowered, which adds to the safety of the vehicle but is frustrating.”

See this page at FARM SHOW →