Les is unhappy with his 1995 Chevrolet Corsica car equipped with a 2.2-liter 4-cyl. engine. “It has been a nightmare from the day we bought it. The car began blowing head gaskets during the first year, but we were reassured that many of these cars had been shipped with defective head gaskets and that the problem had been corrected.
“However, two months after the warranty expired the engine developed a serious coolant leak. The car was returned to the dealer who told me that it needed yet another new head gasket. By this time the warranty had expired and they were going to charge $900 to do the work. I thought that was too much for a 4-cyl. gas engine so I took the car to a machine shop. They discovered that the head was warped and that the original valve train had been incorrectly assembled. To add insult to injury, when I appealed the case to GM, I was told that the problem was my fault because I hadn’t flushed the coolant at 30,000 miles, even though we had never been able to keep the same anti-freeze in the engine for more than seven months.
“The re-machined head managed to stay on the car for more than a year, but then it cracked apart and had to be replaced due to defects in the casting. Because this has been a long-standing problem with this car and was documented back to the warranty period, we again appealed to GM but to no avail. They’ve generously offered to list me as a dissatisfied customer on their computer file. To date this car has had three heater cores, two radiators, an alternator, and two heads, with no signs of improvement.
“We have three cars, four pickups, two grain trucks, five tractors and many other pieces of farm equipment on our farm, but this car has been the single most expensive piece of equipment to maintain that we’ve ever had.”