Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 2, No. 1 (1978)

Best & Worst Buys: FARM SHOW Vol. 2, No. 1 (1978)

17 reports from pages 8–9 · 17 Best Buys0 Worst Buys · See everything in this issue at FARM SHOW →

Best Buy

GMC

Bernard Kinkelaar, Dodge City, Kan · Vol. 2, No. 1 (1978), p. 8

Bernard Kinkelaar, Dodge City, Kan: “With the cost of equipment today, I'm surprised at the number of farmers who use only dollars and color to make major purchases. Some seem to be married to one color. Personally, would compare specs and dealer service, and forget the color.” So says Bernard Kinkelaar, Dodge City, Kan, He is one of approximately 50 randomly selected readers who nominated their “best” and ‘‘worst” buys for this issue of FARM SHOW. “My best buy is an 800 Versatile 4 WD tractor, Equipped with the Cummins engine, it’s hard to beat. At 150 hours it developed a leak at the front main. My dealer had a factory mechanic at my shed at 10:00 the next morning. By 4:00 that afternoon I was going to the field. My cost, including mileage of 300 miles round trip, was zero. When Versatile and Cummins will stand behind their products like that, I'd recommend them to anyone. With a 60 Flex King Rod Weeder behind the 800, I run at 6.5 mph and cover 450 to 500 acres per day, When can do that on approximately 100 gals. of fuel, I say you have a winning team. Another item I'm pleased with is the monitor on the Gleaner combine. think it's money well spent.” Kinkelaar adds that “my '76 C-10 Chevy pickup was about the worst I ever had. It was equipped with the 350 engine and automatic transmission and could only get 6 mpg. Traded it fora '77 GMC 15 Sierra Granada with the same equipment and now can live with the 17-plus mpg.”

See this page at FARM SHOW →
Best Buy

John Ries, Mt. Vernon, Ind · Vol. 2, No. 1 (1978), p. 8

John Ries, Mt. Vernon, Ind: In sending FARM SHOW his “best” and “worst” buy nominations, John Ries, of Ries Farms, Mt. Vernon, Ind., sent along a special “message to manufacturers": “In my opinion, most new products — especially machinery — are lower quality today. New model equipment is not field tested adequately. Too often, yearold tractors have been called back for major improvement. This is costly for owners, dealers and manufacturers. Our repair and maintenance costs are going up faster than purchase prices. One could once operate a tractor or combine two years without much repair. Now repairs are often needed the first year. Of course, most of them are covered by warranty, but this does not cover downtime, inconvenience and often labor. One of our pet peeves is low quality bearings. I cannot understand why manufacturers think farm equipment doesn't need high quality industrial type (grade) bearings. There is no reason a $50,000 machine should go down because of a $4.53 bearing. Low grade, imported, flanged bearings of the non-regreasable type are the worst. Some bearings cannot be replaced without replacing the entire sleeve or sprocket. At today’s prices, one should expect better.” John blames “lack of engineering “One of our pet peeves is low quality bearings.” and testing” for problems he's had with a 22% ft. IHC model 45 field cultivator which he purchased last spring. “The problem lay in the fact that proper depth could not be maintained. If the tool was lifted part way, it would not always go down evenly unless one stopped, lifted it all the way up, then lowered it to a desired depth. The 3 cylinders just would not synchronize. The dealer did his best to rectify the problem, but unsuccessfully. The company has been working on the problem, I'm told. We hope they find a solution before spring work begins,” On the plus side, John cites a Chicago pneumatic wrench as being ‘just the trick for removing dual wheels, truck rims, cylinder bars, etc. Makes many jobs’ easier and quicker." As in previous FARM SHOW buying surveys, the importance of dealing with a good dealer came through “loud and clear”. For example:

See this page at FARM SHOW →
Best Buy

A.R. Christensen, Merced, Calif · Vol. 2, No. 1 (1978), p. 8

A.R. Christensen, Merced, Calif: A.R. Christensen, Merced, Cal.: He’s disappointed with the dealer who sold him a 25 x 150’ Butler hay barn. “Even though the building was built on a slope, the runoff overflowed the gutter at the high end while little if any came down the down spout. The dealer would not do anything about it.” The problem was corrected when an investigator from

See this page at FARM SHOW →
Best Buy

John Deere

Howard Johnson, Vermillion, S.D · Vol. 2, No. 1 (1978), p. 8

Howard Johnson, Vermillion, S.D: Howard Johnson, Vermillion, S.D.: “My most satisfying buying experience is with a John Deere dealer. I was plowing last spring when all of a sudden I started blowing engine gaskets. thought for sure I'd have to get the tractor hauled into a mechanic. Drove up to Pederson Machine, the Deere dealer in Bereslord, and talked to the head mechanic. Told him the problem and he sent me to the parts man to get a lead plug for the engine block that cost about $3.00. Went home and put it in the way the mechanic told me. Never had any more trouble. really appreciated what he did. He saved me a lot of time and the expense of not having the tractor hauled in. He took time out to talk to me and didn't charge a thing for his advice. didn't even know him. If have more trouble, know where I'll go for advice and repairs."

See this page at FARM SHOW →
Best Buy

Chevrolet + 1 more

Gilbert Livingood, Postville, Iowa · Vol. 2, No. 1 (1978), p. 9

Gilbert Livingood, Postville, Iowa: Gilbert Livingood, Postville, lowa: “If it wasn't for the good service from the local dealer, we would have traded long ago,” he reports in citing problems he had initially with a Chevrolet Scottsdale 20 %4 ton pickup. “It's still under warranty, We have had repair work done on the lights. brakes. fan, power steering, and air conditioning belt and pulley. rhe largest problem was with the motor missing. After about 10 trips for new plugs, points, distributor, wiring harness, etc.. a Chevrolet company man put insulation between the carburetor and distributor and solved that problem. My son has a pickup just like it and has had no problems,” Gilbert notes that his “best buy" is a Deere 6600 Side Hill combine! “It increased our picking capacity at least 100% over the old 6600 on our terraced land. It could use more horsepower, however, especially when it’s muddy.”

See this page at FARM SHOW →
Best Buy

John Deere

John Farrell, Scottsville, N.Y · Vol. 2, No. 1 (1978), p. 9

John Farrell, Scottsville, N.Y: John Farrell, Scottsville, N.Y.: He had two flat tires on his new Deere 7000 corn planter last spring after planting only 8 acres of corn. “Rocks were getting in between the planting unit gauge wheels and the planter tires, ripping the valve stems out.” he told FARM SHOW. “The next day when I went to my dealer to have the tires fixed, there were two factory men there to talk to. Of course, they had never heard of the problem before. tried $76.00 worth of dirt shields on the planter, After that the planter worked perfectly with no problems at all." Thanks to a concerned dealer who ended up making a missing part himself, Keith Oldewurtel, Slayton, Minn., had his new grain bins ready for harvest last fall: “lordered 3 big MFS hopper-bottom bins in June, which they considered an_ early order. Everything came through early enough, except some braces that had to be on as soon as the bins went up. Every time the dealer would call the factory for the braces, they would tell him that they would definitely be shipped next week. The dealer finally had to make the braces himself in order to get the bins up in late October.” New products they first read about in FARM SHOW were “best buy” nominations from several readers participating in this issue's buying survey Combine header adapter kit: “The Bish adapter made the hookup very easy,” reports

See this page at FARM SHOW →
Best Buy

Lloyd Martens, Chadron, Neb · Vol. 2, No. 1 (1978), p. 9

Lloyd Martens, Chadron, Neb: Lloyd Martens, Chadron, Neb.: He reports that yearling steers and spayed heifers implanted in May with Ralgro beef implants “bulled like crazy all summer. Our vet talked to a doctor with the company in Terra Haute, Ind. Got no answers. ‘Never had any complaints before’ was all he would say. No followup by the company at all. Implanted 335 yearlings and had as many as 50 head bulling a day. Implants were made according to Company specs”.

See this page at FARM SHOW →
Best Buy

International Harvester

Patrick Henry, Harmon, Ill · Vol. 2, No. 1 (1978), p. 9

Patrick Henry, Harmon, Ill: Patrick Henry, Harmon, IIL: He gives the dealer a pat on the back for prompt handling of a few minor problems with his “best buy” — an International 1586 diesel, “The tractor performed well with only minor problems. like the quietness of the cab and the ease of handling, The shifting of gears could be improved upon — it shifts into low range with difficulty at times.” Patrick blames ‘an unbalanced fan blade” for triggering problems he's had with “a pto 38 in. Middle State bin dryer LP!" “It heated the corn uneven inthe bin, Asa result, it burnt the first batch and they have never gotten it to heat even. The vibration has fouled up the controls so that the burner won't turn on, The dealer has tried to get it to work for me but the company keeps putting us off in trying to straighten it out.”

See this page at FARM SHOW →
Best Buy

Alexander MacArthur, Algonquin, Ill · Vol. 2, No. 1 (1978), p. 9

Alexander MacArthur, Algonquin, Ill: Alexander MacArthur, owner of Strathmore Farms, Algonquin, Ill. “These people did some deep research before coming out with a new tillage tool. It will do everything they say it will and looks like it's built to last — a rare thing these days.” Two Nebraska readers nominated “It will do everything they say it will; built to last.” the Sub-Mulcher from BC Manufacturing, Beaver Crossing, Neb., as their “best buy”. “I used my SubMulcher last year on my pivot sprinkler irrigated corn ground when the corn was 12 to 14 in. tall,’ reports

See this page at FARM SHOW →
Best Buy

Charles Timm, Big Springs, Neb · Vol. 2, No. 1 (1978), p. 9

Charles Timm, Big Springs, Neb: Charles Timm, of Big Springs. He read about the new kind of deep tillage in our May-June issue last year. “It mulches the ground without disturbing either the top or subsoil. This causes the soil to absorb water and improves the crop's root system by breaking open the hardpan. We had a

See this page at FARM SHOW →
Best Buy

John Deere

Ray Berlekamp, Green Springs, Ohio · Vol. 2, No. 1 (1978), p. 9

Ray Berlekamp, Green Springs, Ohio: Ray Berlekamp, Green Springs, Ohio, who purchased the kil which was featured in FARM SHOW a year ago. Invented and manufac tured by Harvey Bish. Giltner, Neb.. it adapts Deere's popular bean headers to other makes of combines. Ray used it to adapt a Deere 453 row-crop bean head to his 815 LH combine. “It did a very good job cutting the beans low and picking up lodged beans, There was very little shatter loss and I could go both directions on lodged beans,” he reports. Ray adds that he had to do some redesigning to correct problems he experienced with a Lilliston Tillager: ‘It was supposed to work in corn stalks but failed to do a satisfactory job. There was a constant plugging problem, making a mess of the fields. The tool was misrepresented to me and improperly set up, leaving some redesigning to be done in the field.” Lubbock vibrating plow: First featured in FARM SHOW a yearago, this new tillage tool from Lubbock Manufacturing, Lubbock, Texas, was a “best buy" nomination from

See this page at FARM SHOW →
Best Buy

Allis-Chalmers

Ellis Adee, Minneapolis, Kan · Vol. 2, No. 1 (1978), p. 9

Ellis Adee, Minneapolis, Kan: Ellis Adee, Minneapolis, Kan. He's well pleased with two “best buy" nominations — a 24 ft, 1407 Krause tandem disk and a 21 ft. Sunflower folding chisel plow. He adds that a 7080 Allis Chalmers tractor, which he traded off after less than 1000 hours of use for “‘an ugly, plain simple 900 Versatile", did everything he expected of it powerwise. “The dealer and shop service were excellent, The parts department manager would break his neck to keep me happy. Very little downtime. The problems had were minor, such as overload clutch slipping (covered by warranty) and hydraulic lines and valves leaking (factory's fault). The most scarry thing was the factory’s failure to torque the bolts holding the differential ring gear to the carrier, resulting in bolts next to untorqued bolts breaking off like a row of dominos until all were gone. The hydraulic controls, cables, etc. were

See this page at FARM SHOW →
Best Buy

Case

Larry Ruebush, Good Hope, Ill · Vol. 2, No. 1 (1978), p. 9

Larry Ruebush, Good Hope, Ill: Larry Ruebush, Good Hope, IIL: He says his Case 1816 Skid Steer loader is “one of the handiest things around my farm. It’s small enough to pet into very tight quarters to work and seems to be built heavy enough to stand up. I used it over 250 hours a year and have not had any welds break and have not bent or broke any iron,” He adds that the loader’s engine “leaves a lot to be desired. I'd like to see a small air cooled diesel engine, like a small Deutz, put in the 1816, Most air-cooled, one-cylinder gas engines just aren’t built for long, heavy use," says Larry who emphasizes that ‘the good points of the 1816 far outweigh my problems with it. would be lost without it.” Larry also passed along this buying tip: “I use Dupont’s Imron paint when I repaint trucks and equipment and it stays bright-looking even when it's dirty. It’s a polyurethane enamel and stands up to stains and scratches very well.”

See this page at FARM SHOW →
Best Buy

International Harvester

Terry Barth, Friend, Neb · Vol. 2, No. 1 (1978), p. 9

Terry Barth, Friend, Neb: Terry Barth, of Friend. ‘‘It does a good job of fracturing the ground, yet leaves it undisturbed on top. Works real good going down the row after the crop is up. It lets roots and water penetrate. Ralph also nominates two other “best buys”. He’s well pleased with the automatic shutoff on his fuel storage tank which, he says, “works like those on the gas pumps in town. Lets you grease and check equipment while filling with fuel and the tank never runs over.”’ He also notes that his “International rolling cultivator wouldn't work at all. Used it half a day and traded for a Lilliston rolling cultivator which works just wonderful.” Several readers who are well pleased with their “best buy’ purchases offered suggestions on how the manufacturer could make them even better,

See this page at FARM SHOW →
Best Buy

Andrew Machiela, Zeeland, Mich · Vol. 2, No. 1 (1978), p. 9

Andrew Machiela, Zeeland, Mich: Andrew Machiela, Zeeland, Mich. “Tt’s so loaded with ecology gizmos it chokes down to second gear.” He cites Monsanto's new Roundup herbicide as one of his “best buys’’. “We have a quackgrass problem on black marshy ground that you wouldn't believe. We had tried everything and nothing even came close to controlling it. Roundup really works. Spray at the right time and the quack is all gone.” Andrew faults the quick hitch on his 10 ton Huskee wagon gear (‘‘it won't stay locked without tying down and the thing sways all over the road") and the hookup on his planting springtooth, which is designed to mount under the tractor, “It's made by Spread-All Manufacturing and does a nice job but the hookup to the tractor is too light. Welds broke and eventually it all broke loose and I drove right over the top of it. Only used it on about 40 acres. They assured me it was plenty heavy when I bought it.”

See this page at FARM SHOW →
Best Buy

New Holland + 1 more

Donald Burgess, Carthage, N.Y · Vol. 2, No. 1 (1978), p. 9

Donald Burgess, Carthage, N.Y: Donald Burgess, Carthage, N.Y.: He thinks New Holland could make a good machine even better by putting better tires and a better hitch on the Model 479 Haybine: ‘The machine worked alright but everytime I wanted to use it, would have a flat tire. They used such a cheap grade of tire. Also, the hitch was so weak it bent and folded." Donald's new Ford 7700 tractor with cab also earned a ‘best buy” nomination: “I used it filling silo last fall and was very pleased with its dual power transmission for chopping. was real pleased with quietness of the cab and visibility from the cab.” (Continued on page 30)

See this page at FARM SHOW →
Best Buy

Chevrolet

Ivan Zimmer, Stratford, Mont · Vol. 2, No. 1 (1978), p. 9

Ivan Zimmer, Stratford, Mont: Ivan Zimmer, Stratford, Mont. He notes that his 1977 half ton Chevrolet, a custom 10 stick shift with 6 cylinder engine, ‘‘makes just a shade over 13 mpg ona clear day. bought it to be patriotic and conserve fuel, but it’s so loaded with ecology gizmos it chokes itself down to second gear on an average hill. My old '72 Chev 4 WD makes 1412 mpg with a big load of hay in a foot of snow.” On the plus side, Ivan notes that the new truck “rides and steers good and dealer service is above average.”

See this page at FARM SHOW →