Kubota L3400 DT tractor
“I purchased my Kubota L3400 DT tractor with an LA front-end loader new in 2007. It still runs like new and is a real workhorse in any weather. Very reliable.”
71 reports from pages 12–15 · 68 Best Buys16 Worst Buys · See everything in this issue at FARM SHOW →
“I purchased my Kubota L3400 DT tractor with an LA front-end loader new in 2007. It still runs like new and is a real workhorse in any weather. Very reliable.”
“I have a 2007 Case IH Maxxum 125 Pro tractor that has two problems in the winter. One is that the hand throttle doesn’t work until it is well warmed up. The hydraulics are the same way. I’ve taken it back to the dealership several times and they haven’t been able to help me out. Has anyone else had this problem? Do I have to trade it for another tractor?”
“If you change out receiver hitches a lot, this product is great,” he says about his Masterlock 1465DAT stainless steel hitch pin that has a rotating “barrel” on the end. “Just insert the pin through the hitch and rotate the barrel to the side to lock it in place. I have used this pin for years with never a problem. I feel it’s more secure than a retaining clip pin and easier to use. You don’t have to stoop over to find the hole. It’s quick and easy. A great and novel design. Sells for about $10 at Grainger, Northern Tool and other retailers.”
“My best buy is an Earthquake mini-impact wrench with 700 ft. lbs. of torque. It has a lot of power for a smaller tool and doesn’t make a lot of noise. Your hand doesn’t get tired like it does when holding a big impact wrench.
“I’m not crazy about my Central Pneumatic air die grinder with a 4-in. grinding wheel. I’ve only had it for about a year and it makes a grinding sound when you run it and it stalls easily.”
Photo: FARM SHOW“The plastic barrels and conveyor belting that I bought from Repurposed Materials have been best buys (www.repurposedmaterialsinc.com; ph 303-288-1856).”
Read the whole story →Read more at FARM SHOW →“I bought a new Deere 250 skid steer in 2000. It came equipped with Galaxy tires and after 21 years of almost daily use, these tires still have at least a couple of years left on them.”
He’s pleased with his 2021 Fang Rake bought from Leading Edge Attachments to fit his Kubota KX040-3 mini excavator (www.leattach.com; ph 508-829-4855). “This attachment is perfect for clearing brush, vines, briars, and small trees. It doesn’t move dirt like a bucket does. I cleared a creek bank of overgrown brush and recovered 1/4 mile of grazing land 30-ft. wide. I also move lots of rock with this attachment.”
“I like my Woodmizer LT40 bandsaw mill, which I bought used. It has an operator’s seat and hydraulic controls. However, I replaced the Onan engine with a Honda because it was not running right. The only change I had to make was to add a piece of 2-in. channel iron to bring it up to the same height as the Onan.”
“My best buy is a 2006 Dodge Power Wagon bought new. All I’ve done is regular maintenance and it now has over 238,000 trouble-free miles.
“This past January on a cold morning my Deere 5525 tractor would not start. So, my son-in-law took out his heat gun and blew some heat into the intake and the tractor started right up.”
“BlueDevil hydraulic stop leak works fantastic and will solve many hydraulic system problems external and internal. You can get it at Walmart, Amazon, etc.
“Another best buy is my Berkey drinking water filtering system (www.berkeyfilters.com). It works amazingly well. I did make a small modification to the water level sight glass, putting a small plastic bead in the glass to make it easier to see the water level. I also put dark colored tape on the back side of the glass to help see the water level.”
“I bought a Pacific Energy Super 27 wood stove in 2017 (www.pacificenergy.net). I used Class A steel pipe for the chimney, and they went together well. The stove has a baffle system that returns the smoke for a clean burn. There’s no smoke coming out of the chimney when my stove is going. The air wash system keeps the smoke back from the glass on the door, so it stays clean. I just wipe the glass with a paper towel occasionally when the glass is cool. This stove really helps with our heat bill.”
Photo: FARM SHOW“The Kasper Rock Master bucket has cut my rock picking time in half (www.kasperrockmaster.com; 320-630-2712). I purchased the Rock Master in 2013 and used it to break 40 acres of land.”
Read the whole story →Read more at FARM SHOW →Tony’s happy with his King Kutter 33-in. pull-behind offset disk for his ATV. “Despite its small size, this disk does an excellent job chopping up crop residue and makes an excellent seedbed. The disk is the perfect size for small gardens or wildlife food plots, and it tows great behind an ATV for getting into more remote areas of woods and marshes.”
An Exmark 60-in. zero-turn industrial grade lawn mower is Kelvin’s “best buy”. “I bought this mower new and have used it for two years. I’ve mowed 2-ft. high ragweeds with no problem. It’s a heavy-built machine that’s ready to go when I am.”
“I like the Milwaukee FUEL 18-volt 3/4-in. impact driver because you don’t need an air compressor and hose to operate it and it has excellent torque. It has received heavy use over the past four years and when I had a problem, Milwaukee’s warranty was excellent.”
“I bought a Dodge 2500 new in 2001. It has over 200,000 miles on it. I have only put brake pads on once. Otherwise, no problems.
“I have used Case tractors for over 40 years with no problems.”
A 2012 Kubota L3800 4-WD tractor is a “best buy” for Art. “The tractor had less than 600 hrs. on it when I bought it two years ago. It’s equipped with a quick connect bucket on the loader. This is a great attachment that’s real fast and handy. It’s economical to operate and has good power for a 3-cyl. diesel. I’ve had no problems with this unit.”
On the negative side is a 2020 Speed Queen washing machine. “The stainless tub had a burr on one of the drilled holes and the first time it was used it damaged some clothes. The company sent a repairman out and they replaced the tub but would not do anything for the damaged clothes. It works but still tangles the clothes. I’m done with Speed Queen products.”
“I have purchased several Milwaukee M18 tools in the last six years, including a 1/2-in. hammer drill, a 1/4-in. impact driver, a side grinder, impact drawer and circular saw. All work well and the batteries last a long time before charging.
“Stihl products (chainsaws, backpack leaf blower and weed eater) all start easily and do an excellent job. I’ve had no problems with any of them.”
“I’ve been wearing a multitool holster made by Farm Tough Leatherworks every day for over five years (www.farmtoughleather.com). I love that there are no flaps or snaps, just a big magnet inside that grabs my multitool and holds it ‘til I need it. I’ve tried lots of store-bought holsters and these Farm Tough holsters are second to none.
“I have not been impressed with DeWalt cordless drills. The batteries go dead quickly and we’ve had a bunch of DeWalt drills stop working. I took them apart and there was nothing wrong that I could see; some fancy circuit board must have broken internally – so frustrating.”
“My 2012 Kubota 3200 is very good. It’s easy to start and has had no problems. I like the power steering, HST transmission and 4-WD.”
“I’ve had my Stihl MS 290 chainsaw for 13 years and burned about 90 gals. of gas in it. The only thing that’s ever been done to it is regular maintenance - a new air filter and plug. I’m very happy with it.”
Photo: FARM SHOW“We love working with whole grains, baking with them and eating them. Our electric KoMo grain mill makes it easy to eat freshly ground grains year-round.”
Read the whole story →Read more at FARM SHOW →“I was looking for better traction going up our sloped driveway. I bought the 2021 Ariens Compact 24 Rapidtrak snowblower because the back track wheel can be lifted to just move on the front track wheel, making it easier to turn it around in the garage without the engine running.”
“I only split around three cords per year, but the Harbor Freight electric log splitter has done all I’ve asked of it. I couldn’t be more pleased. Plug it in and it splits.”
“We bought our 2018 Subaru Outback in 2019 with 7,000 miles. We take it back to Subaru for regular service and never had to spend money on anything other than regular maintenance. It has around 60,000 miles.
“I purchased a Woodland Mills sawmill in October and love it. It’s well-built and high in quality – a very nice saw.”
“My MillerTech #556 (2nd gen) headlamp was the best buy I’ve ever made. I’m a mechanic and don’t understand how I did my job before I got this. It’s made with military-grade aluminum and has a 5-yr. warranty. The rechargeable Li-ion battery lasts 5 hrs. on high and 120 hrs. on low. I liked it so much that I became a dealer.”
“My 2019 Polaris 570 side-by-side cranks every time and is low maintenance. Being a mid-size makes it easy to run our 600 acres of fences and carry fencing gear to make repairs. The power steering is nice. It’s a good buy.
“Tractor Supply Co. sells a Traveller 3,000-watt inverter. I bought it thinking it would have 3,000-watts available at the outlet. My small compressor requires 2,000-watts of power. After buying and mounting it on my truck, I found out it only has 1,500-watts per outlet. So, it’s really a 1,500-watt 2-circuit. I should’ve looked closer at the box.”
“My best buy is a Kobalt 40-volt pole saw I bought this summer. The battery lasts as long as I do.”
A used Case 1294 tractor is Vance’s “best buy”. “It does everything I ask it to do.”
He’s disappointed with a used Deere 2510 tractor. “It has very little hydraulic capacity for the 3-pt. lift – even less than the last Deere that I sold because of poor hydraulics. The dealer has not been able to fix or adjust.”
“The Miller Spectrum 875 plasma cutter cuts very well. I got it from Amazon in four days when dealers said it would take six months or more to order one.
“The HP OfficeJet Pro 8025e printer would not work out of the box. Staples would not give our money back. They said we had to get it from HP – no luck.”
“I cut a lot of wood to heat our old farmhouse and I really like and depend on my Husqvarna 545 and 460 chainsaws. Our Husky pole saw runs great, too.
“I detail cars, trucks, tractors, etc. and use products from The Last Coat – great stuff that can make an older vehicle or machine look like new (www.thelastcoat.com; ph 833-852-2628).”
“We couldn’t operate our farm without our 2010 Kawasaki Mule. It’s a great machine.”
“My worst purchase is a 2021 Deere 4066R tractor built in 2021. Since I’ve had it, it’s spent more time at the dealer than at my house. The minute I use it, it wants to fall apart. It’s crazy to pay that kind of money and then not be able to use it.”
“I bought a Forney battery charger with a 100 amp boost in about 1976 for around $135.00. It’s still going strong after all these years.
“When Dodge advertises their trucks as ‘Ram tough’ they may well be correct. We have a 2004 and a 2007 Ram 1500 with 5.7 Hemi engines. I bought the 2004 for my 16-year-old son for his first vehicle and the 2007 mega cab new. Both are still going strong.”
“My Deines 1800KT 60-in. 18 hp. zero-turn lawn mower is over 25 years old and still cuts like a beast. Parts are on the shelf at my dealer. No trimming is required around the 40 plus trees in my yard as the mower is far in front.”
“My best buy is a Hobart welder I bought five or six years ago. I’m really a beginning welder but have built and repaired several things. It’s worked really well.”
“We have a Lincoln pneumatic grease gun, but you can’t always bring the dozer back to the shop when it’s time to grease it. The Makita XPG01Z 18-volt LXT grease gun is one of those purchases that will make you wonder why you didn’t have it 10 years ago. No more hose and it’s a breeze to load grease into. We’ve fought with that Lincoln for years - loading grease into it and trying to get the air out of it. You won’t have that issue with the Makita.
“My 2021 Wagner FURNO 500 heat gun lasted three uses at which time the fan quit running. The company did send me another one after I paid to have the old one shipped back and a month doing without it. When you need something to work, you’re counting on it at the time, not a month later. Every time these good American companies send their products out to China to be made, we have to suffer with inferior products.”
“In 1982 I bought a 5-in. Makita angle grinder. For many years, it was my only grinder, and the way I weld, it got a workout. My welding hasn’t gotten any better, but I’m pleased to say that grinder is still going strong. With not one issue in 40 years, it’s definitely a ‘best buy’.”
“One of the best tools I’ve purchased recently is a Maxxeon Cyclops work light. It’s small, compact and has a very bright light even on the lowest setting. I’ve used this light in a professional workshop setting and it’s very rugged and the magnet is extremely strong. It has three brightness settings. It fits into small spaces and holds on tight. I often tell people it’s an awesome magnet with a light attached to it.”
“My Kubota L3200 tractor is hydrostatic drive and I love it with the loader. It’s easy and safe to operate and is just as good as my old Kubota L275, which was perfect. My old unit went to my grandson on his five acres. He is teaching his son to operate it and loves it.”
“My Olight Array headlamp has been an excellent light (www.olightstore.com). I bought it new in 2020. It’s light, comfortable and plenty bright with four settings. It has a magnetic charger that uses a USB port. It takes 3 hrs. to charge from dead. It has a red backlight that would be good for bicyclists. It works well for hands-free use and the lowest setting is plenty for most household uses and reading.
“My worst buy is a China Leather Shoe Patcher (CLSP) I bought on eBay for my wife. It’s a hand-cranked heavy-duty leather sewing machine. It’s complete garbage. It’s a cheap imitation of an old Singer machine from the early 1900’s. We spent weeks adjusting, smoothing rough areas, taking it apart and putting it back together. It never worked as advertised. It has very rough castings. We lost money on it and decided to get an old Japanese electric leather machine and it works like a dream.”
“My best buys are my various Gravely two-wheel tractors. They’re simple, powerful, gear-drive machines with over 30 attachments that can go from bush hogging to finish mowing, opening a field to rototilling and cultivating gardens. They will chainsaw trees, grind stumps, dig post holes, plow and blow snow. The only issue I have with them is they’re habit-forming. I started with one and now I have four running and several more waiting to be put back into service.”
“Our Samsung refrigerator has been nothing but a headache since day one. There have been many problems including the ice maker and a drawer that I can no longer control the temperature of because the wiring was destroyed by the casters that allow the drawer to be pulled out.”
“I love my 2018 Kubota M7040 with a premium cab. It’s amazing how long it lasts on a tank of fuel. We use it for everything on our 40-acre farm.
“My 2018 Deere 6130 has nothing but problems: A/C leaking, little oil leaks, and hoses being overheated and damaged by being close to the muffler/exhaust. The dealer is all talk but no action. So, I plan to buy a 200 hp. Cat challenger soon.”
“My best buy is my Echo chainsaw with a 58-volt 4.0 Ah lithium-ion battery and 16-in. bar (Model CCS-58V4AH). It has a brushless motor that operates longer than I can. Though not cheap or much lighter than my 42cc gas chainsaw, I do not miss maintaining, starting, refueling and fixing a gas model. I just grab and go. I recently cut down, delimbed and bucked a 20 to 24-in. cherry tree with the cordless in one charge. The battery will need to be replaced eventually, but even if that were to happen today, I’ve saved a significant amount of money on high-octane gas, 2-cycle oil, spark plugs and carburetor repair parts.
“The Little Giant Plastic Poultry Waterer is my worst buy. This waterer works by using vacuum. The lid needs to be twisted on super tight to create enough vacuum. If not tight enough, you come out in the morning to a flooded coop. When you get it on tight enough to hold vacuum, it won’t unscrew without using the jaws of life. I switched to a Harris Farms plastic drinker that uses a float and is trouble-free. Definitely better than galvanized, which lose their ability to hold vacuum with any kind of dent or when they inevitably become rusty.”
“I got my DeWalt 20-volt 1/2-in. lithium-ion drill for Christmas in 2014. Seven years later it still works fine. The chuck has a little bit of play in it, but the batteries are the originals. It’s helped build our sheds, do repair work on the house, and even helped dismantle a big camper with a couple thousand screws in it.
“My chickens had lice on them. I tried a bunch of stuff but didn’t get good results. Then I came across Manna Pro’s Poultry Protector (www.mannapro.com; 800-690-9908). I tried it and it worked. If you have a heavy infestation like I did you won’t get rid of them completely. It kills on contact, yet the ingredients are all safe and contain no chemicals.”
A Yanmar tractor loader with backhoe is Lee’s “best buy”. “I use the backhoe to dig footings, trenches and dig out tree stumps. The backhoe comes off easily in a few minutes. Overall, I like the tractor and would purchase it again. A drawback is that the loader lift capacity could be higher. A full bucket of damp dirt maxes it out. I would also route the exhaust up as I hate smelling it all the time from the low outlet near the front.”
“My 2014 Kubota L3901 with front end loader and grapple has been so useful in many ways. I find the most uses for the grapple, even more than the forks and bucket. We have a farm with many oak trees that often drop their limbs because of wind. Also, our blueberry bushes need pruning, so I can pile the limbs up, then pick them up with my grapple.”
“The Yeswelder True Color solar-powered auto-darkening welding helmet (model EH1002) is one of my ‘best buys’ (www.yeswelder.com). I purchased the cheapest Yeswelder hood as a spare in case my other hood acts up or I have to haul my welder somewhere else in the field. I realized I could see so much better with the True Color, especially in dark areas, that it’s now my favorite helmet. I have trouble now if I have to use my other dark tint hood.”
“I use my Kubota side-by-side for everything from feeding cows to hauling garden supplies.
“I love the Ariat Rebar women’s insulated overalls. I’m plus-sized and was having to wear men’s overalls before. But these fit me perfectly. They are a lifesaver when feeding cows in the winter and they have just enough stretch.”
“I bought a Milwaukee 18-volt grease gun two years ago and am very pleased with it. It’s fast, has great pressure, and never has an issue with air locking after a cartridge change. The long hose is nice for reaching remote fittings.”
A 2017 Deere 2038R Compact utility tractor with loader and Auto-Connect 60D mower deck is Howard’s “best buy”. “It’s easy and fun to operate. It has plenty of power and many features. It’s also easy on fuel.”
“My 2021 G3 Sportsman 1710 is easy off and on the trailer and a great boat for fishing.
“My 20-cu. ft. Frigidaire freezer never worked right and the only warranty repair in the area was the absolute worst. They were not reliable and never did fix it. The selling dealer finally swapped it out when Frigidaire would not make it work or replace it.”
“Milwaukee hand-held battery products have better battery life, more power and are the most dependable.”
Richard isn’t as pleased with the Tracfone Moto E cellphone he purchased at Walmart. “When the phone was two months old, I got the run around about which company would handle the warranty. After 3 hrs. on the phone, I gave up and threw it in the trash.”
“In March of 2020 I purchased a Smithy Granite combination milling/metal lathe to assist with repairs and manufacturing of equipment. It was especially helpful in repowering my Simplicity tractor by making it possible to build up a new driveshaft for it. It works well and I’m still going through a learning curve with it. I purchased a digital readout for the vertical milling/drilling portion, and it helped greatly. A DRO for the x and y-axis would help a lot and that’s next.”
“The only new item I’ve bought in a lot of years is a Frontier 2072 3-point rough cut mower. As I’m sure many of your readers will know, Frontier is owned by John Deere, so it’s basically a Deere. Not a bad machine but couldn’t be called a ‘best buy’. It cuts decently but for some reason, the telescopic pto shaft will not go all the way back in and they can’t say my tractor is too big for it as I use a 54 hp. Deutz on it. I bought a new Woods M5 rough cut mower in 1982 and still like it. It’s a much better mower and still going strong. I would nominate it as a ‘best buy’.”
“Before I retired, I was subscribing to at least 10 farm magazines. After I retired and was put on a fixed income, I could no longer afford all of them. Gradually, I cut back. The only one remaining is FARM SHOW Magazine. I get more than enough good ideas from your magazine to cover the cost. As long as I’m still up and around, I’ll always have your magazine.”
David’s “best buy” is a Deere D125 riding mower. “I mow approximately 4 1/2 acres all year. I’ve had other mower brands and none of them had the power or sustainability. All of the other ones had blades that would look like pretzels upon hitting a rock or stick but the Deere blades seem indestructible. They do need sharpening but have never bent. The only trouble I’ve had is with the belts. When I get something jamming the blades they will burn off if I don’t shut down soon enough.”
“I’ve been very pleased with the Cutlass Deluxe mower blades for my Deere mower (www.cutlassblades.com; 800-608-5973). I run about half throttle on the lawn but can cut heavier vegetation just as easily with more rpm’s. They really throw the cut grass. They’re also easy to take off and sharpen and put back on without any tools. I found them through FARM SHOW (Vol. 41, No. 5).”
“My towable trencher from Harbor Freight works flawlessly in tight spaces. There is a Facebook group that’s very helpful should repairs be needed or modifications made.”
“My worst buy was a new Husqvarna 42-in. 1-cyl. Briggs and Stratton lawn tractor. It almost shakes you apart it vibrates so much. The dealer finally exchanged it for a much better twin-cylinder.”
“My 2020 Earthquake 1/2-in. cordless impact does more and is handier than my 1/2-in. pneumatic. The battery has a long life, too.
“Warrior drill bits for steel weren’t sharp out of the box and won’t retain a sharp point. I spend a lot of time and effort to keep bits sharp and these are disappointing.”
“The Work Smart Ken Onion Edition knife sharpener is shaped like a small band saw. It’s generally well built and works very well. The instructions are easy to follow. After about two years, one of the drive pulleys broke. I emailed the company seeking to purchase replacement parts. Instead, they sent me a new device free of charge.
“My Toro TimeCutter zero-turn mower started breaking after about six months of use. The belt tensioner uses plastic pulleys that kept breaking. I had also purchased the extended warranty which was essentially useless. I had a very hard time finding anyone to repair the machine. After finally getting the machine repaired, it immediately broke again. This machine is only useful for light use on very small properties.”
“My 2021 Ruger Mini-14 5.56 rifle has a lot of attachments made for it. The peep sight is great; it’s the first ever I had on a rifle. It was easy to learn to use and is accurate with no kick. A child or woman could use it.”
A Deere 4044M tractor with D170 loader, iMatch Quick-Hitch, and pallet forks is a “best buy” for John. “My 440M is a great all-around workhorse. The pallet forks save my back, and the Quick-Hitch makes hooking up implements much easier.”
John also likes Stihl products. “Stihl saws have been a ‘best buy’ since I bought my first one while still in high school in 1977. I have an 039 that I bought in the mid-1990’s that is still going strong. Our battery-powered leaf blower is a huge improvement over the gas-powered ones.”
On the negative side are drill bits by DeWalt and Milwaukee. “If you are only drilling wood, they are acceptable. For drilling even thin steel they are so brittle they break constantly. They don’t begin to compare to drill bits made 20 to 30 years ago. If I wanted cheap junk, I would buy bits at Harbor Freight. I’ve actually had better luck with their cheap bits than I’ve had with the name brands. At least if they break, I expect it.”
“My Ford F-150 with 4.6L has been the most reliable vehicle I’ve owned. It’s been in the family since it was new. It now has 120,000 miles with only regular maintenance. It’s quite underpowered but with the few issues it’s given me, I can’t afford to move it down the road.
“The Cabela’s size 32 meat grinder is advertised as ‘commercial’ and worked well for the first 30 min. each time I used it. It then progressively got weaker and weaker. After talking to the company rep, I found out the duty cycle is only 60 percent. That’s good for deer but not good enough for pig or beef.”
“I’ve had my Worx 32-volt trimmer for several years now and love it. It’s way better than any gas-powered trimmer I had before. I can trim my two lots in town almost three times before I need to recharge it. String comes out when you pull the trigger so no ‘bumping’ is needed. A lifetime supply of string is a bonus from Worx as well.”
Jason isn’t as pleased with his Porter-Cable 20-volt circular saw. “I received the 5-piece tool set as a gift. The drill driver, impact drill, reciprocating saw and vibratory tool work flawlessly, but the circular saw was a real letdown. It junked out altogether during a remote project where I didn’t have access to power. What a disappointment.”
“My five Stihl chainsaws have cut timber and firewood and helped with storm cleanup and general farm work. They’ve never failed to start and run even at -15 F. Best saws ever.”
WD-40 can be found on Jeff’s “worst buys” list. “Every can I’ve bought ran out of propellant and wouldn’t spray.”
“My Ferris IS3100Z 30-hp. zero-turn mower has plenty of power. It has coil/over shock independent suspension which makes for a much smoother ride.”
“I bought a used Snap-on pistol grip ratcheting screwdriver (SSDMRE4) on eBay. I bought it after attempting to use about 10 other types of small grip ratcheting screwdrivers. It can be used with one hand in small spaces. Mostly I repair small, difficult-to-reach things or do stuff like repair damaged siding on my house. This type of tool accomplishes such work much more efficiently than anything else I have used.
“My 2020 Ativa 12-sheet Micro-Cut Shredder (A12MC19) worked for the first few sheets of paper. About the third time I used the shredder, I attempted to run through about 10 sheets of paper. The horizontal cross-cut teeth jammed with the fixed vertical teeth. I couldn’t get it unjammed. I donated the shredder to a recycling place and bought a vertical cut paper shredder – good enough for what I do.”
“This year I bought a new Deere air compressor and wish I had bought it years ago. Even though I have a large portable air compressor that I sandblast with, it’s way too big for my spray gun. The Deere model is just right for spraying paint. It always starts, even in cold weather, and has more than enough pressure and air volume to run my industrial spray guns. A lot of people make the mistake of buying an air compressor that can produce 120 psi air pressure but fail to take into account that air volume (measured in cubic feet per minute) is also very important. I am pleased with this compressor and would recommend it to anyone that needs a reliable air source.”