Ford F-250 Super Duty trucks
What FARM SHOW readers say · 15 Best Buys4 Worst Buys · Trucks & Cars
Ford F-250 Super Duty trucks
15 Best Buys4 Worst Buys“I’ve been impressed with the Kobalt tools I bought in 2015. Both my 80-volt electric chainsaw and leaf blower are awesome. They have plenty of power and long-lasting, quick-charge batteries. The chainsaw isn’t for firewood, but we built three barns (10,000 sq. ft.) with it. Where pole barn quality cuts are ok, it’s a game changer with no cords to contend with and no starting issues. The leaf blower is great for tractor radiators and general field cleaning for air filters, etc.
“I bought new Ford trucks in 2019 (F-250 Super Duty) and 2021 (F-150 4-WD). They’re great but driving them is like having a nagging mother-in-law on the dashboard: ‘I’ll cut the lights for you. Put your seatbelt on. You’re at a stop, I’ll cut the motor off for you. Here, I’ll defrost your mirrors even if it’s 50 F.’ I can’t put the darn key on my ring because the other keys press the alarm button so I’m constantly going back to get the key I need from the house. I can’t carry these new keys. Why can’t somebody just build a plain old truck?”
James likes his Milwaukee battery-powered tools, especially the new “fuel” tools. “They have a lot of power for such a small package and the warranty is 5 years on tools and 2 years on batteries. They once sent me a new tool because it would have cost too much to repair the old one. I had a battery go bad and they sent me a new one. Not many warranties are that good any more. We hardly use our corded or air tools any more. These are so convenient.
“I wouldn’t necessarily call it a worst buy but my Ford F-250 Super Duty with 6.7l diesel gets poor mileage - 15 mpg has been the best with about a 12 mpg average. On the plus side it will pull anything you hook up to it, and the ride is wonderful for a 3/4-ton pickup. I would rather ride in it than our car.”
“My 2017 Ford F-250 Super Duty 3/4-ton pickup has a lot of power and is fairly fuel efficient. The back-up camera on it is useful, and the step-in tailgate is handy.
“When we got our new Whirlpool refrigerator home we discovered the shelves aren’t adjustable and therefore milk bottles won’t fit on the top shelf. Also, the ice maker is very slow to recover.”
Robert bought a used 1999 Ford F-250 Super Duty 4-WD pickup equipped with a 7.3-liter turbocharged diesel engine. It had 225,000 miles on it.
“Normally I wouldn’t buy a pickup with that many miles, but this one seemed to be well maintained. It had primarily been used to haul a fifth wheel camper, so the miles had accumulated without a lot of abuse. The engine is quiet and only leaks a little. The pickup is built solid but had a totally rotted-out bed, which I replaced. Apparently the engine has a good reputation. We’ll see.”
“I suppose that in some situations this hitch system might save time and be convenient to use. However, by the time I get done setting it up, adjusting it, and screwing around trying to get it to work right, I might as well have hooked up the implement the normal way. Another problem was that my finish mower didn’t seem to float correctly. I finally gave the hitch to someone else.”
“It’s a handy truck for doing small jobs,” says Dale about his 2010 GM Canyon 4-WD pickup. “This pickup is dependable even though I did have to replace the water pump, and it drives extremely well. It has about 125,000 miles on it and seems to be holding up well considering how much I use it.”
On the negative side, he lists his 2010 Ford F-250 Super Duty 4-WD pickup equipped with a 6.4-liter diesel engine. “Its fuel economy is terrible, especially when pulling trailers. So far this year it’s getting only 9.2 miles per gallon.
“I’ve had endless problems with sensors, the 4-WD system, a leaky radiator, broken intake manifold bolts, torn seats, broken brake calipers, and a hole burned through the exhaust manifold. I have to admit this pickup does pull well when it’s not in the shop. But I can barely afford to operate it.”
“I’m impressed with my Woods 990 7 1/2-ft. finishing mower and Woods 7-ft. box blade. The finishing mower has a heavy duty frame and wheels. It’s a wonderful mower. The box blade is also built heavy and has held up great. I’ve always been sold on Woods products.
“I bought a used 2001 Ford F-250 Super Duty pickup with about 46,000 miles and sold it at about 49,000 miles. The 5.4-liter engine had no power at all.”
“My 2003 Ford F-250 Super Duty pickup equipped with a 6.0-liter Power Stroke engine was the biggest piece of junk I ever owned. It started having problems at about 8,000 miles and was at the dealer a lot. After about 36,000 miles the warranty expired and I had to pay for all repairs from then on. So far, I’ve spent about $15,000. I still have this pickup today and am still paying repair bills. It has about 109,000 miles on it and has never been abused.
“I called the company’s warranty service people but they just said ‘sorry’. I was offered $7,000 for this pickup 2 years ago on a trade. I guess I should have taken them up on it.”
“I like my 1999 Ford F-250 Super Duty pickup equipped with a 7.3-liter Power Stroke diesel engine. I also like my 2006 Scion XA hatchback car. Both vehicles have at least 200,000 miles on them but are still going strong. The pickup can do about anything and is strong enough to pull Texas across the country. The Scion XA gets 30 mpg and still rides as good as new.”
Howard’s satisfied with his Homelite 42cc, 14-in. chainsaw. “It’s light and handy, once I take off the safety tip that restricts the cut to about 12 in. Best of all it starts with a couple of pulls, unlike my Poulan and Stihl models.”
On the negative side, he lists his 1999 Ford F-250 Superduty pickup equipped with a Triton 5.4-liter engine. “An oil leak developed between the head and block and cost $1,900 to repair. Also, the heads only have 4 threads in the spark plug ports with aluminum inserts rather than steel inserts, like on a real engine. Ford should have stuck with what they were good at – cast iron and push rods, not aluminum and overhead cams.”
“It’s the best pickup I’ve ever owned,” says Cleveland about his 2009 Ford F-250 Super Duty model equipped with a 5.4-liter engine.
“My 1957 Ford 660 tractor still starts faithfully. I use it to rake hay with a Ford 3-pt. mounted rake.”
Terry’s the satisfied owner of 1993 and 1997 Ford F-250 Super Duty pickups, both equipped with 460 cu. in. engines. “Both pickups pull really well. The 1993 model has about 149,000 miles on it but has required only normal maintenance. I use them to pull trailers and to push snow.
“My Husqvarna 455 Ranger chainsaw equipped with an 18-in. bar is my worst buy. The oiler didn’t do a good job of lubricating the bar, and the chain often came off. I took the saw back to the dealer twice and complained but got nowhere. Later on I learned the drive gear on this saw’s oiler is made of plastic and tends to break or slip. I got rid of the saw and bought a Stihl 30 model, which works twice as good.”
“In 2003 I bought a 1999 Ford F-250 Super Duty FX4 pickup equipped with a 7.3-liter Powerstroke diesel engine. It had about 97,000 miles when I bought it and recently turned 250,000 miles. The engine works great. I brew my own biodiesel and run this pickup on 100 percent biodiesel during the 8-month warm season in Iowa. The only problem is with the bearings in the pickup’s front wheel hubs. I’ve had to replace the bearings four different times, and it costs about $1,000 for both hubs. What’s more, I rarely use 4-WD any more.
“I like the pickup’s 7.3-liter Powerstroke diesel engine. And I love using biodiesel, especially when it costs only about $1 per gallon to make. All in all, except for the wheel hub problem this is a great pickup.
“I love the 1986 Mercedes Benz 300 SDL car I bought used equipped with a diesel engine. It has about 90,000 miles on it. I bought this car because we were spending more than $400 per month on gas to commute in my wife’s 2011 Kia Sorento. I run it on 100 percent homebrewed biodiesel during the warm months. Commuting in the Benz instead of the Kia is saving us $300 per month in fuel costs.”
Randy nominates his 2002 Ford F-250 Super Duty 4-WD extended cab pickup equipped with a 7.3-liter Power Stroke diesel engine as his “best buy.” “I’ve used it a lot to pull a 36-ft. tandem axle, 20,000-lb. rated gooseneck trailer on which I haul a Ford 555 backhoe.
Robert’s pleased with his 2000 Ford F-250 Super Duty pickup equipped with a 5.4-liter, V-8 gas engine and 5-speed transmission. “I haven’t had any problems at all with it. It has more than 70,000 miles on it and has required only regular oil changes and tire rotations. I installed a fifth wheel hitch in the bed.”
Wendell’s pleased with his 2001 Ford F-250 Super Duty extended cab pickup. “I like the ride and also the V-10 engine, which has a lot of get-up-and-go. I’ve put more than 5,000 miles on this pickup, and about 4,000 of those miles have been spent pulling a 16-ft. trailer loaded with a tractor and Bush Hog mower. It’s a good pickup.”
Larry’s impressed with his 1999 Ford F-250 Super Duty extended cab, shortbed pickup equipped with a diesel engine and 6-speed manual transmission. “I like the way it handles. The diesel engine has a lot of power and is economical to operate. The cab offers a good view and the four doors are handy for passengers. However, I’m disappointed with all the wind noise in the cab. My 1992 Ford pickup is much quieter.
“My worst buy is my 2000 Millermatic 250X wire welder equipped with gauges. I’m very disappointed with it. We have an old Millermatic 200 that has been trouble-free. The spool of wire on the 250 won’t turn freely. The problem is that it catches on a bolt head that should have been countersunk. The factory sent me a kit to correct the problem. The voltage varies whenever I try to weld. It’s either hot or cold and won’t hold an arc. The voltage and wire feed charts are located on the inside of the door so every time you want to check the settings you have to open the door. The charts should be on the outside of the door. Also, the 200 model does a much smoother job of welding than this one.”
“It tows six 1,800 to 2,000-lb. round bales with ease,” says Donald, pleased owner of a 1999 Ford F-250 Super Duty 4-WD pickup equipped with 5.4-liter engine, automatic transmission, and 4:10 axles. “The truck handles extremely well and has ample power. We like the style of the new Louisville Line. We also like the straight axle and lock in and out manual front hubs.”
He also likes his 1996 Vermeer Super K baler. “We’ve made over 3,000 bales with it, no problems.”
Philip’s most recent best buy is his 1999 Ford F-250 Superduty diesel pickup equipped with extended cab and full box. “Handling is excellent and it rides better than a mini van we own,” he says. “It has awesome power and the Allison automatic transmission shifts exceptionally smoothly. It’s pretty fuel efficient, too, getting 14 to 18 mpg.”
Own a Ford? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.