Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 37, No. 3 (2013)

Best & Worst Buys: FARM SHOW Vol. 37, No. 3 (2013)

82 reports from pages 12–15 · 78 Best Buys12 Worst Buys · See everything in this issue at FARM SHOW →

Worst Buy

Swisher zero-turn mower

Darren Kornowske, Denmark, Wis. · Vol. 37, No. 3 (2013), p. 12

“My 2009 Swisher 60-in. zero-turn mower has been a nightmare. Within 15 hrs. the deck bearings that held the blades failed. The dealer told me the blades weren’t the problem and that I’d have to pay for repairs. I took the bearings apart in his parking lot and showed the mechanic that the bearings were gone and the shafts were worn out, too. They ordered the parts but wouldn’t install them because I had taken them apart.

“At 20 hrs. the frame broke in front of the seat and Swisher wouldn’t warranty it. I welded the machine back together and reinforced the frame. Then both front wheels came off. Again, they wouldn’t warranty it. I reinforced the wheel mounting brackets and then the front axle broke. Around 40 hrs. the electrical wires burned off a terminal on the key switch. That was caused by the alternator putting out too much current. I re-wired the unit myself.

“At 45 hrs. the right hydro wheel motor quit working. The machine went through two deck belts per season because the belt path takes a sharp downward turn from the engine to the deck. I bought the machine because it was made in the U.S. and thought I was getting a good product and creating jobs. The machine has just over 45 hrs. on it and the only useful parts are the engine and the pretty black paint.”

Best Buy

Yanmar 169D 4-WD tractor

Jerry Johnston, Vestaburg, Mich. · Vol. 37, No. 3 (2013), p. 12

“My 1986 Yanmar 169D 4-WD tractor is dependable and a lot bigger than it first appears. We use this tractor almost every day to do chores such as snow blading, bush hogging, operating a pto-driven log splitter, and plowing our garden. It’s equipped with a 16 hp diesel engine.”

Worst Buy

MileStar tires

Don Stout, Harlem, Mont. · Vol. 37, No. 3 (2013), p. 12

“The MileStar tires I put on my trailer didn’t last long. The tread warped on one tire and came off on another. Neither the dealer nor the manufacturer would help. They claimed the tires were four years old, yet I only had them for 1 1/2 years and put just 1,000 miles on them.”

Best Buy

Ram 2500

Sydney Cutting, Clements, Calif. · Vol. 37, No. 3 (2013), p. 12

“My 2010 Dodge Ram 2500 is an excellent pickup for ranch chores. It’s comfortable to drive, even for a 5 ft. 3 in. tall person, and there’s plenty of passenger room. It’s a good looking, fuel efficient pickup. So, when will these pickups be equipped with WiFi?”

Best Buy

Hyundai 19.2-volt drill

Gerald Robinson, Sr., Alden, Iowa · Vol. 37, No. 3 (2013), p. 12

“I bought my Hyundai 19.2-volt drill on sale for about $20 and it’s by far the best drill I’ve ever owned. I work it hard but it keeps on going. I’ve never been able to find another one, and I don’t know why.”

Best Buy

Ford New Holland 1715 tractor required

Ed Knecht, Fallon, Nevada · Vol. 37, No. 3 (2013), p. 12

“My 1996 Ford New Holland 1715 tractor required the installation of an electric fuel pump, because the tractor’s original fuel pump was gravity-fed through a very small filter. If I was low on fuel and came to a hill, we’d have to back up because the fuel wouldn’t feed. The tractor also has to be clutched two or three times to get it into any gear at a stop.”

Best BuyWorst Buy

Fisher + 2 more

Mark Jones, Sault Ste. Marie, Mich. · Vol. 37, No. 3 (2013), p. 12

“My 2002 Fisher 8-ft. X-blade stainless steel snowplow is an incredible plow (ph 800 678-2459; www.4qte.com). I operate a commercial snow plowing business, and this snowplow hasn’t broken so much as a bolt. It’s completely bulletproof. All I’ve done is change the oil and replace the blade’s cutting edge. Hands down, this is the toughest piece of equipment I’ve ever used.”

On the negative side, “My 2007 Dixon Kodiak ZTR riding mower had problems from the start. The first model I bought blew a crank seal after just 5 min. of use, which caused the engine to seize and ruin a customer’s yard with hot oil. The replacement model’s Briggs & Stratton engine suffered from severe electrical issues due to vibration. The electrical system never did work correctly, and as a result the machine spent more time in the shop than cutting grass. The vibration would cause the wires to disintegrate inside their covers. I don’t know how many times I had to push the mower out of a customer’s yard because it quit running. I finally traded it in.

“My Mantis garden tiller never has worked well. The carburetor is unusually susceptible to ethanol problems and has to be replaced regularly.”

Best Buy

American Automotive 2-post car hoist

Dale Kreitzer, Cresco, Iowa · Vol. 37, No. 3 (2013), p. 12

“I like my American Automotive 2-post car hoist (ph 800 637-2884; www.americanautomotiveequipment.com). This hoist was easy to put together and works well. There was a small oil leak on a hose fitting, but the company took care of it. I enjoy using this hoist every chance I get. I should have bought it years ago.”

Best Buy

Kioti 30 hp 4-wd loader

Robert Plummer, Swanzey, N.H. · Vol. 37, No. 3 (2013), p. 12

“I use a 50-in. snowblower on back of my Kioti 30 hp 4-WD loader tractor. The tractor is equipped with turf tires, and I need to use tire chains on them to get through snow and ice. However, the rear tires barely miss the tractor’s body and 3-pt. hitch arms. The company doesn’t sell a spacer for this purpose so I took a front drive brake hub and disc from an old car and made one. I cut the long hub off, centered it, and drilled holes in it. It works fine. I also used the hood from an old car to make an overhead canopy for the tractor.”

Best Buy

DR TreeChopper mounted

Jay Harris, Ness City, Kan. · Vol. 37, No. 3 (2013), p. 13

“I used to pay a neighbor $50 an hour to clear locust and yucca from my pastures with a tree saw. Now I do it myself with the DR TreeChopper mounted on my Kawasaki 4-wheeler.

“I eased into the first few, but quickly learned I needed to hit them pretty good to clip them with the rotating blades. With smaller trees spread out over a pasture, I can take out 30 to 40 per hour, clipping them close to the ground and cutting trees up to 4 in. dia. I was really impressed how it took out the yucca, which are a bigger problem for me than the locust.

“I only used it for a day or two when I got it, but plan to use it more this spring. I’ll have one guy on the DR TreeChopper and one with a hand sprayer treating the cut stems.

“Attaching it to my 4-wheeler was simple. I only had to make one minor adjustment to the design, cutting off about 4 in. to accommodate my rear hitch.”

Best Buy

Stihl MS310 chainsaws

Randy Robey, Tehachapi, Calif. · Vol. 37, No. 3 (2013), p. 13

“I’ve purchased two Stihl MS310 chainsaws in the past six years. They’re good saws and always start and have never fouled a plug. However, every two years I have to replace the rubber fuel line from the fuel tank to the carburetor, probably because of fuel degradation due to the alcohol that’s added to the fuel in our area. The company’s engineers need to address this problem. I’ve also encountered this problem with the accelerator pump diaphragms used on Holley carburetors. They last a year or two and then start leaking, which drains the fuel bowl and could cause an engine fire. There’s an alcohol-tolerant diaphragm sold for racing cars, but we also need one for stock street carburetors.”

Best Buy

Milwaukee 1/4-in

Dick Garcia, Casa Grande, Arizona · Vol. 37, No. 3 (2013), p. 13

“I bought my 2011 Milwaukee 1/4-in. Masonry bits to drill into concrete but was able to get less than 1/4- in. into the concrete before the ends of the bits wore down. I tried a second bit with the same results. Finally I went to my shop and found some old Milwaukee bits that I had bought years ago. I was able to finish the job with them, and they worked great. The company’s new bits must be made in China, so I won’t buy any more Milwaukee bits. They just don’t work.”

Best Buy

John Deere 400 rotary hoe

Stuart Harvey, Oakland, Md. · Vol. 37, No. 3 (2013), p. 13

“Last spring I bought a used 3-pt. mounted, 15-ft. Deere 400 rotary hoe because I wanted to add new life to my old meadows. I pulled it over all our pasture ground as early in the spring as possible. I was impressed with the results – more and better quality hay. I plan to use this machine again and again. It breaks up the soil crust and makes holes so air and water can get through to the roots of old hay.”

Best Buy

D.J.M. Sales

Daniel A. Troyer, Gladwin, Mich. · Vol. 37, No. 3 (2013), p. 13

“It’s the best place to buy belts of all sizes as well as bearings, pulleys, gear reducers and various drive components,” says Daniel about D.J.M. Sales (ph 440 632-3427). “This company offers great prices and great service.”

Best Buy

Harbor Freight

Lynn A. Peters, Clinton, N.Y. · Vol. 37, No. 3 (2013), p. 13

“The 1 1/2 and 3-ton Pittsburg aluminum jacks I bought at Harbor Freight are lightweight and lift fast. They’re also easy to handle and low-priced. I also bought a small 800-watt portable generator at Harbor Freight that’s lightweight and runs almost 6 hrs. on a gallon of gas. It comes in handy for operating small electrical tools and lights.”

Best Buy

Ram 3500 pickup

Michael Haney, Scio, N.Y. · Vol. 37, No. 3 (2013), p. 13

“I converted my 2002 Dodge 3500 pickup into a mechanic’s rig, which I use for my work in the pipeline industry. It has more than 375,000 miles on it but still runs like new. I upgraded the steering box with a support track bar. I plan to retire in four years and my truck will too, maybe.”

Best Buy

Ford F-350 Superduty pickup equipped

Myron Karsten, DeWitt, Mich. · Vol. 37, No. 3 (2013), p. 13

Myron’s had good luck with his 2000 Ford F-350 Superduty pickup equipped with a 7.3-liter diesel engine. He bought it used with about 26,000 miles. “I’ve worked this pickup hard, pulling a 26-ft. livestock trailer and also a 31-ft. flatbed that’s usually loaded to the max. It now has more than 256,000 miles on it while requiring only routine maintenance except for a cam sensor recall and a broken leaf spring. Too bad the engine will outlive the body.”

Best BuyWorst Buy

Ralph Lauren paint + 1 more

Dimitri Schlotter, Mancos, Colo. · Vol. 37, No. 3 (2013), p. 13

“We’re remodeling our house and, while the Ralph Lauren paint we used is expensive, it’s also beautiful. It covers well, and covers more area than other paint brands we’ve used in the past.”

On the negative side, he lists a deck resurfacing product from Synta, Inc., named Restore. “It’s expensive and doesn’t cover a big area. Our deck looked beautiful after the first application, but then after a few snowfalls it started bubbling and flaking off. It sells for about $25 a gallon, so we can’t afford to cover a 2,000 sq. ft. deck and have it deteriorate in one season.”

Best Buy

Hardy outside hot water

Larry Henry, Independence, Kan. · Vol. 37, No. 3 (2013), p. 13

“We use our 2011 Hardy outside hot water, wood-fired furnace to heat our home and also to pipe heat into our shop. Even in cold weather we only have to fill the furnace twice a day. It’s made from all stainless steel and has thermostatic control, which we use to keep the water temperature at 170 degrees.”

Best Buy

Toro 520H garden tractor equipped

Keith Berdan, Newark, Md. · Vol. 37, No. 3 (2013), p. 13

“This is one great mowing machine,” says Keith about his 1992 Toro 520H garden tractor equipped with a 48-in. deck. “We use it to mow three acres every week and also to till our 1/4-acre garden. Repairs have been minimal. We’ve replaced both tie rod ends as well as a deck belt and roller.”

Best Buy

Suzuki mini pickup

James Schroeder, Hebron, Neb. · Vol. 37, No. 3 (2013), p. 13

“Our 1999 Suzuki mini pickup is a right hand drive model, that comes from Japan. The pickup’s side panels and rear tailgate can be dropped down to carry posts and panels. It’s a really handy machine for fixing fence and other chores. We find it more comfortable to drive than a utility vehicle because it has a windshield and doors, as well as a heater and air conditioner.”

Best BuyWorst Buy

Belarus 825 tractor + 1 more

Mike Corrigan, Hutchinson, Minn. · Vol. 37, No. 3 (2013), p. 13

“I’ve had very few problems with my 1988 Belarus 825 tractor which I bought used in 1994. It starts well even in below zero temperatures and can handle just about any chore.

“My 2008 Stihl 180 chainsaw would start okay, but after a minute or so it would stop. The dealer had it five times the first year, keeping it for six weeks at a time. After a year, he sent it back to the factory, but when we got it back it ran for only about five minutes before it stopped. I finally threw it away.”

Best Buy

John Deere 5083E tractor

Robert Adams, Sr., LaPlata, Md. · Vol. 37, No. 3 (2013), p. 13

“After only 77 hrs. of use the power steering went out on my 2009 Deere 5083E tractor. Two bolts on the left side were lost, and two more on the right side were ready to drop out. The dealer came and got the tractor, which was still under warranty. He fixed it and brought it back to me. But at 155 hrs., the same problem happened again, and this time the warranty had expired. I told the dealer I didn’t intend to pay to have it fixed, so he and the company went back and forth over it and kept my tractor for 2 mos. before I got it back.

“The company claims they’ve never seen this problem before. They want me to let them know after every 20 hrs. I use the tractor so someone can come out and check the bolts because they couldn’t figure out a solution to the problem.”

Best Buy

Ford F-350 pickup

Thomas A. Viator, New Iberia, La. · Vol. 37, No. 3 (2013), p. 13

“The 6.0-liter diesel engine on my 2006 Ford F-350 pickup started causing problems at about 50,000 miles and was replaced under extended warranty at about 87,000 miles. Unfortunately, the replacement engine started having problems at about 38,000 miles.”

Best Buy

Case IH RBX 563 round baler + 2 more

Gary Stern, Halliday, N. Dak. · Vol. 37, No. 3 (2013), p. 14

“I’m well satisfied with my 2008 Case IH RBX 563 round baler which is equipped with endless belts, net wrap and a wide pickup. It makes nice bales. We rake two windrows together to make large windrows, and the baler handles them with ease.

“My Deere 704 pull-type, 14-wheel rake does a nice job of raking but is built too light for rough hay ground. Every year the frame breaks in a different spot and has to be reinforced and welded.

“My White 272 35-ft. disk does nice work, but the shafts that the blades are mounted on are only 1 1/8 in. in diameter when they should be at least 1 1/2 in. or more. Last spring I broke eight different shafts.”

Best Buy

Evolution Tools

Jerry Maddock, Defiance, Ohio · Vol. 37, No. 3 (2013), p. 14

“I really like my Rage Multipurpose Circular Saw from Evolution Tools. The 7 1/4-in. blade cuts plastic, steel, aluminum and wood with one blade. It’s great for working with reclaimed wood. If you hit a nail, it cuts right through it.

“When I brought it home, I put a piece of pipe in my vise and cut right through it. I’ve used it for cutting metal siding, steel tubes and more.

“It cuts steel smooth without a burr and doesn’t even heat it up like other saws do. You can get a diamond blade for it to cut stone, concrete and brick.

“I’ve got the Rage Miter Saw too. It has a 10-in. blade and also cuts steel, aluminum, wood and plastic. It has laser guidance, compound tilt and a slide for long angled cuts. Put a diamond blade in it, and you can cut tile too.”

Best Buy

Dadant & Sons

Brad Goetz, Batavia, Ohio · Vol. 37, No. 3 (2013), p. 14

Brad likes the beekeeping equipment he bought from Dadant & Sons in Frankfort, Ky. (ph 217 847-3324; www.dadant.com). “The service provided by these folks has been top notch. I’m a ‘newbie’ at beekeeping, but they answered all my questions and provided excellent recommendations that helped me decide exactly what I needed to get started. All the equipment they sell is made in the U.S., which I consider a big plus.”

Best Buy

Saginaw Valley Tractor

Terry Hill, Ceresco, Mich. · Vol. 37, No. 3 (2013), p. 14

“We bought a 3-pt. conversion kit from Saginaw Valley Tractor for our 1955 Allis Chalmers WD45 tractor (ph 810 638-5787; www.saginawcountytractor.com). It lets us use standard 3-pt. equipment on the tractor. It’s well made, economical and works great.”

Best BuyWorst Buy

Chevrolet Silverado 2500HD 2-WD pickup equipped + 1 more

Andy Williamson, Lucedale, Miss. · Vol. 37, No. 3 (2013), p. 14

“It’s by far the best work truck I’ve ever owned,” says Andy, pleased with his 2007 Chevrolet Silverado 2500HD 2-WD pickup equipped with a 6.0-liter engine and automatic transmission. “This pickup is just the right size for a small farm. The 6.0-liter engine has enough power to handle a 35-ft. gooseneck flatbed trailer loaded with eighteen 6 by 6-ft. round hay bales, or a 32-ft. gooseneck cattle trailer loaded with cows.

“I’m disappointed with my 2000 Ford F-150 pickup equipped with a Triton V-8 engine. The original engine blew up at about 88,000 miles, and the replacement one at about 110,000 miles. The third engine worked fine until I sold the pickup. Another problem was with the Coil Pack ignition coils. If they got wet, most of the time they’d go out and that started happening once or twice a week. The ignition coils cost about $55 apiece to replace, not including labor.”

Best Buy

Komo

Wendy Wellnitz, Lanesboro, Minn. · Vol. 37, No. 3 (2013), p. 14

“I eat oatmeal five days a week, and since we bought a hand-cranked oat flaker, it tastes better than ever. I think it’s creamier and has a better taste. With the FlicFloc hand flaker from Komo, I can roll out about a third of a cup of oats in a minute.

“The flaker weighs 4 1/4 lbs., is about 7 in. high and has a beech plywood frame. It clamps quickly into place. The tapered stainless steel rollers spin the flakes into a 4-oz. glass that fits underneath the rollers in front of the flaker.

“Although we’ve only used it for oats it’s supposed to work on all types of grain (except for corn), oil seeds and herbs.

“At $170 it’s not cheap, but it’s so well-built I expect it will last a lifetime. (ph 800 321-1073; www.pleasanthillgrain.com).”

Best Buy

John Deere Model D equipped

Lowell LyGrisse, Towanda, Kan. · Vol. 37, No. 3 (2013), p. 14

“The first tractor I ever drove was in the 1930’s - a Deere Model D equipped with steel wheels. At the time I wasn’t even 10 years old. Later in life I bought three Deere 4020 tractors and turbocharged one of them to 118 hp. It’s still running with 12,500 hours on it and has had no major repairs.”

Best BuyWorst Buy

Ram 1500 pickup + 1 more

Calvin Grobe, Oakland, Iowa · Vol. 37, No. 3 (2013), p. 14

“My 1999 Dodge 1500 pickup has more than 187,000 miles on it but is still running strong. I’ve replaced only the front steering system.”

On the negative side, “I’ve spent a lot of money for repairs to my 2001 Chevrolet Duramax diesel pickup, which has about 176,000 miles on it. It has needed new fuel injectors, a new fuel injector pump, an Allison transmission transfer case, ABS brakes, and a main computer totaling about $17,000.”

Best Buy

John Deere 950 4-WD loader tractor + 1 more

David Windhorst, Portersville, Penn. · Vol. 37, No. 3 (2013), p. 14

“My 1982 Deere 950 4-WD loader tractor has required only routine maintenance. I’ve used it to move manure, dirt and snow, to bush hog, plant corn, and to do other chores. It has about 3,000 hours on it. The one problem has been with the Firestone Z16 tires on front. They came with only 2-ply sidewalls, and the first year both tires got bruised when they hit tree stumps. I replaced them with 5.60-16 truck tires with 6-ply sidewalls. Those tires have worked well but will need to be replaced soon.”

Best Buy

Wheel Horse 312-8 garden tractor

Marty Graham, Peck, Mich. · Vol. 37, No. 3 (2013), p. 14

“This tractor is worth its weight in gold,” says Marty about his 2003 WheelHorse 312-8 garden tractor. “I use it to till and work up small gardens for people with limited yard space. It can get into tight places where a compact tractor can’t go. I use it with a snow cab, 48-in. blade, 48-in. rototiller, single bottom plow, V-ditcher, and a harrow. I haven’t spent a dime on repairs other than for routine maintenance. It’s a rock-solid little tractor.”

Best Buy

Harbor Freight 1/2-in drive + 1 more

Robert Thomas II, Oak Grove, Mo. · Vol. 37, No. 3 (2013), p. 14

“I like my Harbor Freight 1/2-in. drive Earthquake impact wrench. The quality and torque is equal to impact wrenches that cost twice as much. I paid $71.20 for it with a 20 percent off coupon. I’ve used this impact wrench to change tires on trailers and tractors, and it easily loosens the most stubborn bolts.

“I bought my NumMax 21 degree framing nailer at Home Depot to finish my basement. It’s lightweight and works well, and it was priced at only $89.99. I had to order this tool online but it came with free shipping. Excellent quality and no jams. It’s built rugged and shoots a variety of different nails so I can meet all building codes.”

Best Buy

Ram 3500 pickup equipped

John Martin, La Crescent, Minn. · Vol. 37, No. 3 (2013), p. 14

“I like my 2004 Dodge 3500 pickup equipped with a Cummins diesel engine and 6-speed manual transmission. It has a trouble-free engine, rides good and is fuel efficient. I’ve put about 130,000 miles on it so far and am looking forward to many more years of good service.”

Best BuyWorst Buy

Stihl FS weedeater quit working + 1 more

Ed Fewell, Standard, Ill. · Vol. 37, No. 3 (2013), p. 14

“Last year my Stihl FS weedeater quit working after 18 years of use. The only parts I ever replaced on it were an air filter and a spark plug. What’s more, when I recently bought a similar new model from the company the price had only gone up by less than $20.

“I bought my 2005 Toyota Scion XA car used in 2007 with about 38,000 miles, and now it has about 90,000 miles. The only repairs have been for a new wheel bearing at a cost of less than $300, and a new battery.”

Best Buy

Avalon Mission woodstove burns clean

Eric Hendricks, Brinnon, Wash. · Vol. 37, No. 3 (2013), p. 15

“Our 2001 Avalon Mission woodstove burns clean (www.avalonfirestyles.com). We use it to heat our 1,500 sq. ft. house, and hardly any soot develops in the stovepipe. The stove’s front glass is self cleaning so I only have to clean it once every three weeks or so. There’s no catalytic burner to mess with.

“This stove is very efficient as it burns the smoke and no chimney is needed. It’s so efficient that the first winter we used six fewer cords of wood than in the past.”

Best Buy

Country Clipper jazee

Paul Erickson, Roseau, Minn. · Vol. 37, No. 3 (2013), p. 15

Paul nominates his 2009 Country Clipper JAZee Pro zero turn riding mower as his “best buy”. “I love the maneuverability offered by joystick steering, and the mower’s high blade speed and deep deck design provide a beautiful cut with no plugging or windrowing. All I’ve replaced is one idler pulley.”

Best Buy

Ford F-250 heavy duty pickup

Gary Meers, Verona, Va. · Vol. 37, No. 3 (2013), p. 15

“I like my 2000 Ford F-250 heavy duty pickup equipped with a 5.4-liter gas engine. But at about 200,000 miles I gunned the engine to get out of a ditch and blew out a small hydraulic tensioner on the right timing chain that works on oil pressure. At first the engine lost oil pressure, but it came back. However, the loose chain wore a hole in the cover. Now it sounds like a valve is tapping, and oil is slinging up onto the underside of the hood. The engine still runs okay but I don’t dare rev it up. It’ll have to be fixed or the chain could jump the sprocket teeth. My advice: if you have a pickup with high miles, don’t gun the engine.”

Best BuyWorst Buy

Jacobsen Bobcat zero turn riding + 1 more

Eugene Hagene, Pinckneyville, Ill. · Vol. 37, No. 3 (2013), p. 15

“No problems with my 2008 Jacobsen Bobcat zero turn riding mower (ph 866 469-1242; www.bobcatturf.com), which is equipped with a 60-in. deck and 31 hp engine. I’ve put several hundred hours on it.” RC Series low tunnel hoop bender from Lost Creek Greenhouse Systems (www.hoopbenders.net) has been a great addition to my garden. The bender turns 10-ft. lengths of conduit into 4-ft. wide hoops in no time.

“For the past two years, plastic-covered hoops have given my tomatoes and peppers a head start in the spring. I did learn the hard way to make sure to ventilate on warm days when a bed of peppers burned up.

“Cold winters and hot summers are no match for the low tunnels I’ve used with lettuce and spinach. I plant in late summer and pick greens until early December. Then I leave the plastic on through the winter, and the bed greens up in early March for daily picking by the end of April. Last summer I put shade cloth over hoops on a spring planted bed and picked spinach and lettuce until early August. I also shaded a young bed of rhubarb, and it stayed lush and full all through the summer, while neighboring plants dried up in the heat and sun.

“This year I hope to bend some larger hoops for use with netting to keep birds out of a blueberry patch and with plastic to stretch my tomato season well past the first frost.”

Best Buy

Cobra DHC 2000 pistol grip torch

Melvin Troyer, Mercer, Penn. · Vol. 37, No. 3 (2013), p. 15

Melvin’s impressed with his 2011 Cobra DHC 2000 pistol grip torch (ph 248 499-8122; www.cobratorches.com). “This torch saves 40 to 50 percent on acetylene and oxygen because the pressure always stays at a low 4 lbs., no matter what. I’ve used this torch to dress up a lot of horseshoes. It comes in a kit with several different cutting attachments. It does a nice job of cutting with a little practice, almost like a plasma cutter.”

Best Buy

Uncommon USA + 2 more

Robert Anderlik, Boone, Iowa · Vol. 37, No. 3 (2013), p. 15

“A couple of years ago we bought a telescoping flag pole from Uncommon USA at a farm show (ph 800 470-2210; www.uncommonflagpoles.com). We like the pole so last summer we bought a solar-powered light from the same company that fits on top of the flag but it only lit up the top of the flag. We returned it.

“The Yamaha Terra Pro 4-wheeler we bought used several years ago is a best buy. It’s equipped with a pto shaft which we use to power a 38-in. bush hog mower. We’ve used this 4-wheeler a lot but it just keeps on going. It doesn’t use any oil and very little gas. It doesn’t have 4-WD, but it does have a differential lock which really helps if the vehicle gets hung up on anything. I don’t think they make this model any more, but I’d sure hate to part with mine.

“We like the 1999 Dodge Grand Caravan we bought used in 2002 with about 90,000 miles on it. We drove the van until 2011, when we sold it to a friend with more than 235,000 miles on it. It never required more than routine maintenance. I changed the oil and filter every 3,500 miles and never had to add oil between changes. Just before we sold the van the original muffler went bad, so I replaced it as well as the rear wheel brake linings. The new owner really likes it, too.”

Best Buy

John Deere 4

Stewart Ellis, Clearbrook, Va. · Vol. 37, No. 3 (2013), p. 15

“This little workhorse will do most any job we ask it to do,” says Stewart, pleased with his Deere 4 by 6 diesel Gator utility vehicle. “It has required only routine maintenance. Works great for feeding round bales. A tank of fuel will last us for days.”

Worst Buy

Ram 2500 diesel pickup

Jim Martin, Baker City, Ore. · Vol. 37, No. 3 (2013), p. 15

Jim’s disappointed with his 2008 Dodge 2500 diesel pickup. “Poor fuel economy, poor brakes, and trying to change the oil and fuel filters on this pickup is a nightmare. There are no drain plugs on the front or rear differentials, and the dealer wanted $164 to change the oil on each differential. The driver’s vision on the left side is greatly obstructed by the left pillar post, which is too large and poorly located.”

Best Buy

Kubota M7040 tractor + 1 more

Anthony Beard, Prescott, Mich. · Vol. 37, No. 3 (2013), p. 15

“We’ve had good luck with the 2008 Kubota M7040 tractor we bought used with 566 hours. We’ve put 200 hours on it. It has a lot of power and is easy on fuel.”

On the “worst buy” side, he lists the 30 by 72-ft. ClearSpan hoop building he bought from FarmTek. “We paid a premium price for this building. It’s advertised as being ‘made in the U.S.A’, yet the word ‘China’ was stamped on about half the parts. The building’s purlin clamps take two bolts, but the bolts on ours came with one 7/16-in. nut and one 10mm nut. It’s very discouraging to find out about this problem when you’re working 10 ft. off the ground. Also, some of the clamps were missing and we lost time waiting for them to be delivered. When we went to install an end panel we discovered it was the wrong size and wouldn’t fit properly. There were other problems, too.

“As a result of these problems, I had to call customer service several times over the course of two days. Every rep I talked to seemed to think the problem was due to a lack of skill on my part, and not a problem with their product. Finally I was able to talk to someone who understood the problem and resolved it immediately. Too bad I had to talk to four people before I found him.

“The company stood behind its product, but I had to fight with them over too many problems. I plan to put up several more hoop barns in the future, but next time I’ll go with a cheaper brand. This company has a good building, but they need to work on their customer service.”

Best Buy

Kubota RTV 1100 utility vehicle

Tom Crittenden, Mansfield, Penn. · Vol. 37, No. 3 (2013), p. 15

“My 2011 Kubota RTV 1100 utility vehicle has a great cab, air conditioner, heater, radio and dump box. My complaint is that the machine is really gutless on hills and the gears are hard to shift. The company knows about these problems but doesn’t do anything about it. I’ve heard that some company offers a gear shifting upgrade for a few hundred dollars, and another offers a power boost solution for a few thousand dollars. But wouldn’t it be nice if Kubota would just solve the problem on its own?”

Best BuyWorst Buy

Chevrolet S10 pickup + 1 more

Jerry Woosley, Morristown, Ind. · Vol. 37, No. 3 (2013), p. 15

“Several years ago I bought a used 1997 Chevrolet S10 pickup to replace a 1990 S10 that my son totaled. I’ve put more than 120,000 miles on it with no major problems. I use it to run back and forth from the house or barn to our fields and to town.

“When the stamped steel axle on my MTD Poulan riding mower broke, I called the dealer only to find out he had died. With no dealers around I called the company asking for a replacement front axle, but all I got was the run-around. So I got my welder out and repaired the axle by myself.”

Best Buy

John Deere

Rick Connell, Holland Centre, Ontario · Vol. 37, No. 3 (2013), p. 15

“My Deere dealer has been in the business for 62 years. His name is Ivan Carmichael and he started a dealership in Chatsworth, Ontario in 1951. Over the years he sold and serviced thousands of Deere tractors and other equipment. In the 1990’s, Deere decided it should have less dealers so Ivan joined a dealership in Walkerton and they called it Northridge Tractor. In the early 2000’s, Deere again decided to get rid of dealers so Ivan joined Huron Tractor, which has 9 different locations. I hope Deere benefitted from these decisions because the Carmichaels, and the farmers in this area, did not. However, we’re fortunate to still have this good dealership while Case, International, Ford and Allis Chalmers are all gone. Today, Ivan can still be seen at the dealership almost every day of the week. His daughter, son and two son-in-laws work there, too.”