Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Vol. 37, No. 2 (2013) › Feature
Feature storyBest Buy

"Best Buy" Kubota B7510 Tractor

A FARM SHOW reader · FARM SHOW Vol. 37, No. 2 (2013), page 14

“My 2007 Kubota B7510 tractor equipped with a front-end loader and backhoe is my best buy,” says Raube McDaniel, Philippi, W. Va. “This tractor just doesn’t know when to stop and has had no problems. I’ve used it to move tons of dirt and to dig several ditches for my neighbors. I can’t say enough good things about it. In the past I owned a used Ford 1210 tractor but was always repairing it. I had to replace the seals, gears, and the main shaft in the transmission. I spent almost as much on repairs as what I paid for it.

“My neighbor was so impressed with my Kubota that he went out and bought one just like mine. He’s very pleased with it.

“I built some bucket-mounted log forks for the tractor to move logs onto my small chainsaw sawmill. I used the leaf springs from a 3/4-ton pickup. They fasten to the sides of the bucket with 2 bolts. A second leaf welds under each fork and extends back under each side of the bucket to add strength when lifting heavy logs.”

Contact: FARM SHOW Followup, Raube McDaniel, RR 2, Box 46C, Philippi, W. Va. 26416 (ph 304 457-4184).

Read more at FARM SHOW →
"Best Buy" Kubota B7510 Tractor
Photo: FARM SHOW
"Best Buy" Kubota B7510 Tractor
Photo: FARM SHOW

Reader comments

Kubota B7510 tractor equipped

2 Best Buys0 Worst Buys
Best Buy
Paulie McDaniel, Philippi, W. Va. · Vol. 37, No. 1 (2013), p. 12

“It just doesn’t know when to stop,” says Paulie about his 2007 Kubota B7510 tractor equipped with a front-end loader and backhoe. “I’ve used this tractor to move tons of dirt and to dig several ditches for neighbors. I can’t say enough good things about it. I had been using a Ford 1210 that I bought used, but I had to replace the seals, gears, and main shaft inside the transmission and spent almost as much on repairs as what I paid for it.

“I made bucket-mounted forks that I use to move logs onto my small chainsaw sawmill. The forks are made from the springs off a 3/4-ton pickup. I cut and welded the springs together and then bolted them to both sides of the bucket. The forks have a second leaf that extends back under the bucket, which adds strength when lifting heavy logs.”

Ford 1210 tractor

3 Best Buys0 Worst Buys
Best Buy
Wayne Lemke, Pembroke, Ontario · Vol. 33, No. 6 (2009), p. 13

Wayne likes his Ford 1210 hydrostatic drive loader tractor. “It’s an excellent tractor. It’s just the right size to go to the woods to cut wood and can easily maneuver around trees. We put the sawed pieces of wood in the bucket and haul them to the trailer. This tractor is just the right size for a number of jobs on our farm.

“My International 633 4-WD tractor is my worst buy. We went to the woods to cut wood and on our return home we were driving at a slow speed when the transmission housing broke in half, causing the pinion gear shaft to break. It was an expensive repair.”

Best Buy
Ray L. Combe, Paradise, Utah · Vol. 27, No. 4 (2003), p. 12

“My Ford 1210 tractor equipped with a front-end loader and backhoe is a best buy. I bought it used 10 years ago and it has saved me a lot of work. I use it around our yard to plant trees and do other small jobs. It still runs good and has a lot of power for its size. It’s also easy on fuel and small enough to get in tight places. I also use this tractor to do some work for my neighbors.

“My 1999 Ford F-150 4-WD pickup equipped with a 5.4-liter engine is my worst buy. At about 45,000 miles the right cylinder head gasket started leaking oil at the rear of the engine. I talked to six service managers at Ford dealers in northern Utah and southern Idaho and learned that this leakage is a common problem in the 4.6 and 5.4-liter engines. It’s caused by shoddy work in the manufacturing process. Metal chips left on the block or head aren’t cleaned off and when the head gasket is installed, the chips keep the gasket from sealing and in some cases damage the head. The oil leak is usually at the right rear, left front or both heads on the engine. How hard is it to clean the head and block before the engine is assembled? Ford hasn’t been able to do it in six years. I let my neighbor, a fan of Dodge, read Ford’s service bulletin 02-22-7 and his question is, if the chips are on the block and head why wouldn’t they be inside the engine also?

“Ford’s recommendation is to pull the engine before removing the heads so the heads won’t get damaged during removal from the engine. Two dealers I talked to won’t replace the gaskets unless new heads are installed. Labor, two new heads, the gaskets, recharging the air conditioner, etc., put the cost at about $3,000.

“When I called Ford and filed a complaint, I asked why they sent pickups out knowing they had defects in them. Their reply was that it doesn’t make any difference if the pickups leave the factory with defects because if they fail during the warranty (three years or 36,000 miles) they’ll fix it - after that it’s the owner’s problem. This is how Ford expects to reach their goal of 100 percent customer satisfaction. My position is if the truck leaves the factory with defects, Ford should fix it, under warranty or not under warranty.

“The people at Ford think they can send their pickups out with defects in them and after the owners get stuck with a huge repair bill they’ll buy another one of their junkers. Not me, I’ve been driving Ford trucks since May 1967 but I wouldn’t buy another one if they were having a two-for-one sale. Besides, if you pay $30,000 for a pickup and it can’t run more than 45,000 miles, why would you want another one?”