Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 3, No. 1 (1979)

Best & Worst Buys: FARM SHOW Vol. 3, No. 1 (1979)

34 reports from pages 12–14 · 32 Best Buys6 Worst Buys · See everything in this issue at FARM SHOW →

Best Buy

John Deere

George Ruppel, Vincennes, Ind. · Vol. 3, No. 1 (1979), p. 12

George Ruppel, Vincennes, Ind.: “It's a shame they did not do better with a good idea. I think they should recall them and furnish us a combine as good as they wanted us to think we were buying,” says George Ruppel, Vincennes, Ind., who is disappointed with some features on his International Axial-Flow “rotary’’ combine. On the plus side, George notes that, “the machine is build around what appears to be a better threshing setup than the usual cylinder. It has a quiet cab which I wish was fully centered. think the rear mounted motor is ina good place and also the fuel tank. In 130 acres of beans with some bad spots of weeds and grass, we had no stops due to rotor wrapping or plugging — even in green, viney black beans. “On the minus side, the machine shows a real lack of plain common sense on the part of those who designed it. Many simple, easily available conveniences are lacking. They left. too many corners, pockets, ledges, and flat irons to hold grain in a tank that should be self cleaning. linate Also, there are many places inside the main machine where trash, dust and grain mixture collect — bushels of it. The floating cutterbar is not built for easy, smooth feed to the platform auger. Even after being checked by the dealer, the brakes are nearly worthless. The gear shift does not operate as positively and accurately as it should for safety.” George adds that one of the ‘‘best buys” he made last year was a Deere 7000 Max-Emerge 8-row corn and bean planter with Tru-Vee double disk openers. ‘The position of the depth regulating wheels is a big help toward accurate planting. The folding tongue is fine for road transportation. After thorough adjustment and tightening to make up for some sloppy assembly, and adding some improvements of our own, I think we have a good planter.” Here’s how other randomlyselected FARM SHOW readers sizeup “best” and ‘‘worst’’ buys they've made recently:

See this page at FARM SHOW →
Best Buy

Gehl

Darrell Jensen, Hamlin, Iowa · Vol. 3, No. 1 (1979), p. 12

Darrell Jensen, Hamlin, Iowa: He nominates a Gehl 1200 chopper with corn and hay heads as his ‘“‘best”’ buy. “Tcut all my oats, hay and quite a few acres of corn, plus my son’s and neighbors, and all the trouble we had was a loose set screw on one bearing lock collar. No end to the capacity. I pull it with an IHC 1586 with 165 hp. and have yet to shear a pin." Darrell is disappointed with his “Farmhand grinder-mixer Model 830. Nothing but trouble with it since the day I bought it. Every time wanted to grind, something would break. After a breakdown, the company would send repairs which took about a week to get here. They replaced about 3 gear boxes, 2 hammermill drive shafts, the vertical auger and other miscellaneous parts. The company even took it to the factory for a week. was lucky to have a good dealer who let me use one of his used ones while was broke down.” Darrell adds that “I bought from Agri-Electronics Co., of Bloomington, Minn., a bird chaser which is supposed to keep birds out of metal, uninsulated buildings. Supposed to put out a high pitched sound. The sparrows sit right beside the electric box and it doesn’t bother them at all.”

See this page at FARM SHOW →
Best Buy

John Deere

Edward Shute, Red Cloud, Neb · Vol. 3, No. 1 (1979), p. 12

Edward Shute, Red Cloud, Neb: On the plus side, he's well pleased with his Deere 1214 pull-type swather. “This machine ran all summer with no breakdowns, It came from the dealer serviced and ready to go. Was one of the few machines have bought lately that has good workmanship.” On the minus side, Edward is disappointed with “Genisis II and Medina soil conditioners. I used these 2 products on irrigated corn ground — fortunately, on a relatively small scale. Both of these products were used like the company suggested. They did no more good than the water carrier applied with them.

See this page at FARM SHOW →
Best Buy

John Deere + 2 more

Donald Griffith, Glenwood, Mo · Vol. 3, No. 1 (1979), p. 12

Donald Griffith, Glenwood, Mo: “The best buy have ever made in haying equipment is my Vicon disk mower. After owning mowers by Deere, International and David Bradley, and windrowers by Hesston, New Holland and Deere, and an MC Rotary Scythe, wish very much that could have had a Vicon 34 years ago. We mowed 710 acres of hay last summer and never had to stop mowing, despite a lot of rocks and multiflora rosa. We replaced a few blades but never had to stop mowing because of rock damage or rain. Mowed many acres at night. Mowing in conjunction with a New Holland windrower in alfalfa, the Vicon-mowed hay was able to be baled in big bales a day before the windrowed hay, beating a disastrous 4 in. rain.”

See this page at FARM SHOW →
Best Buy

John Deere

Larry Hoover, Millersport, Ohio · Vol. 3, No. 1 (1979), p. 12

Larry Hoover, Millersport, Ohio: “My best purchase is a Deere 6600 combine with Flex-Header and 6 row cornhead, I am very pleased with the header. You just place it on automatic and lower the header to combine beans. You never have to adjust header height during combining — just put the control on automatic. No broken guards and no dirt in the bin.” Also on Larry’s ‘best buy” list is Rid-A-Bird, a product he first read about in FARM SHOW. Manufactured by the Rid-a-Bird Co., Muscatine, Iowa, it uses a “poison perch” which is laced with a chemical, to keep unwanted birds out of buildings. ‘It works,” says Larry.

See this page at FARM SHOW →
Best Buy

Kenneth Mohling, Hale Center, Texas · Vol. 3, No. 1 (1979), p. 13

Kenneth Mohling, Hale Center, Texas: “Unbelievable service," says Kenneth of his “best buy" —a Larson Versatrac Model 6100 high clearance tractor, with Model 7200 boom sprayer, purchased from the Larson Co., Plainview, Texas, “I purchased this equipment to do custom spraying and wanted a machine that would withstand vigorous use under all field conditions. was well pleased ‘*Unbelievable service. The work was done around my schedule, not the company’s.” with the way it held up under hard and continuous use. The warranty service received was outstanding. called the service department at 6:00 p.m, on a Saturday and was back in the field by 8:00 p.m. Another time the company sales manager personally spent half a day correcting a minor manufacturing flaw in the steering system that was one of those hard-to-find-things. Of utmost importance to me was that the needed service was done around my schedule, not the company’s.”

See this page at FARM SHOW →
Best Buy

Jim Knapp, Yates Center, Kan · Vol. 3, No. 1 (1979), p. 13

Jim Knapp, Yates Center, Kan: He's happy with the performance of his Allied 51-ft., 7-in. auger, “It doésn't rattle or vibrate, even when empty.” says Jim. “And the transport position is lower than some 34-ft. augers.”

See this page at FARM SHOW →
Best BuyWorst Buy

John Deere

Max Huston, Montour Falls, N.Y · Vol. 3, No. 1 (1979), p. 13

Max Huston, Montour Falls, N.Y: “It's lived up to all my expectations,” says Max about his Kioritz power scythe. “It has three cutting attachments: nylon cord, brush blade, and saw blade. The brush blade will mow grass as well as cul brush up to ¥% in. in dia, The unit iteself is extremely lightweight (6.8 ky.) and well balanced, It’s one of the best buys we've ever made!” Max says his “worst buy of the year” was his Cadillac Coupe deVille. ‘At first the dealer had the car more than did. The paint didn't match, there was a bad short in the dash and the radio quit working, the seal ripped out 4 times, car would stay on fast idle for over 1/2 hour, the vinyl roof pulled loose, and the power seat wouldn't work. The dealer was extremely reluctant to admit anything was wrong, much less attempt to fix it.” Harry Anderson, Eagle Lake, Texas: “My 8630 John Deere 8630 tractor cost $10,000 more than competitive brands but the dealer performance is excellent. We have two strong Deere dealers in this ricefarming area, and dealer performance is 75% of machine output.” Harry wishes Deere would make combines for rice “the way they used to. Deere discontinued the 105 combine in 1969 and IT discontinued the 915 series in 1977. These machines were the last durable, simple, de pendable combines in rice.” Harry now has a 1974 Deere 7700 combine which he says works fine in soybeans but only fair in rice.

See this page at FARM SHOW →
Best Buy

Wesley Volkert, Aurelia. Iowa · Vol. 3, No. 1 (1979), p. 13

Wesley Volkert, Aurelia. Iowa: “The box and gear are just wonderful but we had the misfortune of it being equipped with B.F. Goodrich tires,” says Wesley about his Year-A-Round 500 bu. gravity flow wagon. "One tire blew, another went flat and one had numerous cuts when we got it. The dealer didn't have the right size on hand so we still haven't been able to use the wagon.” Wesley says his best buy is his Kinge Folding Tool Bar with Deere Max-Emerge planting units. from Kinze Mfg., Williamsburg. Towa. “The convenience of using this is unbelievable. Gan go from planting to transport in two minutes. Sure saves time going from one field to the next,”

See this page at FARM SHOW →
Best Buy

Lynn Dunkle, Circleville, Ohio · Vol. 3, No. 1 (1979), p. 13

Lynn Dunkle, Circleville, Ohio: “After only 50 hours, the transmission locked up. Took the dealer 6 weeks to repair it. Had very poor company service and, after owning the tractor three months, traded it in,” says Lynn about his “Allis 7040 tractor with power shift transmission, Lonly puta total of 285 hours on the 7040 and had nothing but breakdowns from the beginning, now have 600 hours on my 4430 Deereand it runs perfect. with no major troubles.”

See this page at FARM SHOW →
Best Buy

International Harvester

Rolland L. Emch, Perrysburg, Ohio · Vol. 3, No. 1 (1979), p. 13

Rolland L. Emch, Perrysburg, Ohio: He's happy with his “best buy” IH 133 6-row cultivator, and IH 720 6-bottom plow. “The cultivator does a nice job of cultivating, better than the rolling cultivator and the plow does a real good job so we don't have to disk or anything.” Rolland adds that he's been unhappy with his IH model 56 6-row planter, “It skips while planting, A new clutch and something else was puton it, but we haven't tried it since. had a model 58 planter for eight years and never had a bit of trouble with it.”

See this page at FARM SHOW →
Best Buy

Massey Ferguson

Stanley Greathouse, Johnsonville, Ill. · Vol. 3, No. 1 (1979), p. 13

Stanley Greathouse, Johnsonville, Ill.: “Engineers need to visit farms!" says Stanley, pointing out improvements he'd like to see made on the Hiniker floating cutter bar, ‘This is not a bad product, but it’s extremely difficult to remove the knife, The bolts are hard to remove and replace. Then, you must be careful to time the sickle as it was before.” On the positive side. Stanley says his 750 Massey Ferguson combine “has good power and has performed with excellence and only a few minor problems. Service from the dealer is excellent.”

See this page at FARM SHOW →
Best Buy

Frank Anderson, Lakeville., Minn · Vol. 3, No. 1 (1979), p. 13

Frank Anderson, Lakeville., Minn: ; He nominates his Acme “Red Rooster” LP injector for his diesel tractor as his best buy. ‘After read about the device from Acme Mfg., Mankato, Minn., in FARM SHOW, I decided to install one on my Moline G-900. The dyno reading went from 102 hp to 116, where sealed it. Under load, the engine gains about 75 rpm when the LP is turned on, and there is an audible improvement in the tractor’s performance. Fuel consumption is about % gal. per hour less with combined fuels than with straight diesel, believe it is a simpler, less expensive way to boost a diesel than turbo charging.”

See this page at FARM SHOW →
Best Buy

John Deere + 2 more

Dwight Strassheim, Oakville, Iowa · Vol. 3, No. 1 (1979), p. 13

Dwight Strassheim, Oakville, Iowa: “My Superior 8-in., 57-ft. pto auger was a real bummer, The auger screw was not welded tight to the center shaft, which made it too big for the tube. After twisting the pto shaft off twice — $150 in repairs after 10 hours use — pulled the screw out of the tube and found the splice in the middle put in backwards and not welded, Also, the deflector at the top of the auger was factory bent the wrong direction, “After three weeks of telephone conversations with the district man and absolutely no help whatsoever, told him the next call was going to the company president at 7:00 that night. Thirty minutes later he called back and said they were shipping me a new screw — prepaid.” Dwight's best buy was a Deere 8434 tractor which “has power to spare, is easy to handle in tight spots and has excellent hydraulics. After owning IH tractors for 10 years now understand why J.D. costs more — they're worth more!" Dwight adds that his Case 1816 Uni-Loader is the “handiest thing on the farm and as easy to operate as a scoop shovel.”

See this page at FARM SHOW →
Best Buy

Ford

Ralph Roschen, Lake City, Minn · Vol. 3, No. 1 (1979), p. 13

Ralph Roschen, Lake City, Minn: “We bought a Ford 8700 tractor about a year ago and we're well satisfied with it. It’s economical to operate, handles great and has plenty of power. The dealer's service has been excellent.” Ralph adds that he would like to “T wish all machinery would come with regreaseable bearings.” see an end to completely sealed bearings. “I wish all machinery would come with regreasable bearings. The sealed bearings just do not stand up.”

See this page at FARM SHOW →
Best Buy

Norman Horn, Mt. Pulaskis, Ill. · Vol. 3, No. 1 (1979), p. 13

Norman Horn, Mt. Pulaskis, Ill.: “The only thing else that could have gone wrong was for the wheels to fall off,’ says Norman about his Gleaner M2 corn/soybean combine. “The transmission wouldn't work and at the end of the vear, it was taken out. It needed a new fork, two new bearings and two new bevel gears. The electronic system was a_ nightmare. Lights blinking at the wrong time or not at all, and we had to re-wire the whole thing. The header control didn’t work right all season. Quality control was terrible — sprockets not aligned, adjustments wouldn't adjust. Neighbors finally were good enough to help me finish harvest.” On the positive side, Norman purchased a 4500 kw Lincoln welder/generator and used it last winter during an ice storm. “It had plenty of power and we used it for 10 days to keep my farm and house in partial operation. It worked very well, Also, it's a real ‘hot’ welder, using direct current.”

See this page at FARM SHOW →
Best Buy

Wayne Brown, Martinsville, Ohio · Vol. 3, No. 1 (1979), p. 13

Wayne Brown, Martinsville, Ohio: He's excited about his Hotsy hot waler washer model 842, ‘We needed something to clean our hog barns and nursery building and this machine does a wonderful job, It did break down one Saturday but we called our dealer and, in less than two hours, he had a man out and had it fixed. That kind of service is hard to find today.” Wayne didn't have such good luck with another water-related product, a Chem-Tech model 100 water conditioning system. “It hasn't worked right since it was installed. You call them and they come a week or so later, work on it and by the next day it is the same thing all over. They've made five or six trips here. The last was yesterday and doubt if it will work now.”

See this page at FARM SHOW →
Best BuyWorst Buy

International Harvester + 1 more

Jimmy Webb, Bells, Tenn · Vol. 3, No. 1 (1979), p. 13

Jimmy Webb, Bells, Tenn: His “best buy’ is a Cyclo 500 International air planter, “This planter spaces seed any distance desired with unbelievable accuracy. For instance, plant 9 bean seeds per foot of row. Once set, the planter need not be changed again, even when the size of the seed changes. The planter is equipped with a digital monitor, which is a necessity.” On the negative side, Jimmy notes that “the worst buy ever made was a Chevrolet 350 4WD pickup. I have putin the third transmission, the fifth starter the third alternator, the second carburator and the second fly wheel. have kept it serviced perfectly and the drive train has performed excellent. I have five close friends who also have pul transmissions in their Chev. 350's within the first 18 months of service.” Roger Schnell, of Schnell Brothers Rising Sun Farm, Franklin Grove, IL: “In late April of 1977, we took delivery of a new model 7600 Field Queen self-propelled forage chopper. Having run two Field Queen Standards with excellent results, we thought the 7600 series would be equal or better in all respects. During the first month of haylage chopping, we experienced blowing problems in 40 to 50% haylage. In fact, it was impossible to fill the front of the pullbehind wagon. About this time, Field Queen was taken over by the Hesston Corp, After repeated letters and phone calls to the company in the last year, some updates have been made — a new drive clutch, a fuel tank that's easier to fill, a hydrostatic reservoir that doesn’t leak and a speed-up fan pulley have been installed. Poor workmanship in the cab area can never be corrected, And, a different blower housing, neck and spout are needed before the machine 3- — FARM SHOW 1 13 “Best” and ‘‘Wor (orn grinding,” says Roger, He adds that “one of our best buys of the year is 60 by 105 ft. Circle straight wall metal frame machine shed. Delivered on a semi-trailer, all material was of excellent quality and easy to assemble ourselves. One bay section is 30 ft. wide and is used fora drive-through shop. For doors in this shop area, we selected 24 and 26 ft. Wilson Aluminum bi-folds made at Walworth, Wis. They're simple, open toa 13 ft., Gin. height, well insulated and reasonably priced. An all-time “best buy” on the Rising Sun Farm was purchased more than 60 years ago: ‘‘We have a 1917 IH 10-20 Mogul tractor in running order that Dad started farming with.” Roger told FARM SHOW.

See this page at FARM SHOW →
Best Buy

John Deere

Dick Schmidt, Plaza, Wash · Vol. 3, No. 1 (1979), p. 14

Dick Schmidt, Plaza, Wash: “W. traded our older Deere 6602 combine for a new one and, by equipping it with a 77A series watchdog monitor, got a team that in many cases two combines couldn't match. It not only monitors most of the major combine functions for slowdown or belt slippage and warns the operator of hot bearings, belts or pulleys, but at the same time gives hima digital readout of grain loss. Here in the rolling hills of the Palouse Country, we raise peas, lentils, barley and wheat. Changing from one crop to another is sometimes a daily occurrence. ‘This monitor helps us do that ina matter of minutes — and on-the-go right from the operator's seat. When we're through harvesting, we slip our Watchdog monitor out of the combine and into the tractor cab. A few seconds job and we're ready to start seeding with our ‘little miracle box’ tending the chores of the three grain drills.”

See this page at FARM SHOW →
Best Buy

International Harvester

Lapp Brothers, Cochranville, Pa · Vol. 3, No. 1 (1979), p. 14

Lapp Brothers, Cochranville, Pa: Heading their “best buy” list is a new International Axial Flow combine (“il's a pleasure to operate’) and an International 4 WD tractor (“has a quiet cab and plenty of power to handle heavy equipment. such as a 26 ft. Krause Rock-Flex disk, which has been another good buy for us”). On the negative side, the Lapp Brothers note that “the wetting agent Wex has been a problem. Clogs up the sprayer and doesn’t do what the dealer says it will do.”

See this page at FARM SHOW →
Best Buy

Larry Strole, Broo, Ind · Vol. 3, No. 1 (1979), p. 14

Larry Strole, Broo, Ind: He's happy with his 22 ft, Kewanee 1000 series disk harrow (‘Very well made and does everything Kewanee and my dealer said it would") but unhappy with his 11,100 bu. Chief grain tank: “Very sloppy work done by the dealer. They installed bent panels and put the door in wrong. Because of this, the bin leaks like a sieve when it rains. We have another bin 3 years old exactly like this one, but put up by a different dealer that is performing very well”.

See this page at FARM SHOW →
Best Buy

John Deere + 1 more

Earl Aeker, Piedmont, Ala · Vol. 3, No. 1 (1979), p. 14

Earl Aeker, Piedmont, Ala: ‘It really holds the ground. Floats over rocks and ridges real good. Gets more 14 C FARM SHOW 2- st” Buys page) beans than a ridgid cutter bar,” says Earl of his ‘best buy” Deere 4400 combine with flexible cutter bar platform. Donald H. Meierhofer, Minonk, IL: ‘I'm very well satisfied with the service and clean grain samples from my New Holland TR-70 combine. The Cat 3208 engine could use a lit“We use a Deere header on our TR-70 combine. Works great.” tle more power when unloading heavy corn on the go. We bought a Bish Header Adapter Kit, which allows us to use a John Deere 6-row corn and row crop header on the TR-70. Works great.”

See this page at FARM SHOW →
Best Buy

John Deere

Herb Hall, Prophetstown, Ill. · Vol. 3, No. 1 (1979), p. 14

Herb Hall, Prophetstown, Ill.: He says his Deere 6-row soybean header “saved the day” a vear ago this fall. “Like many others, we got caught by the early snows with part of our crop still standing. With our new 6-row Deere soybean header, we were able to combine beans in the snow. The snouts actually pulled beans out of the snow, giving us a good quality, marketable product, with little or no loss."’ Herb is disappointed with his ‘“JavKee goosneck trailer with grain box. At the factory, they put the wrong axles under the chassis, thus weakening the trailer. To date we have broken two axles. The dealer has admitted that the wrong axles were used and that all the axles should be replaced. However, neither he nor JayKee has ever made any kind of arrangement to replace these axles,” Michael Doherty, Dunningham, Ca.: “In my estimation, Stauffer knows they have a captive market,” says Michael, who is disappointed with “Stauffer’s Ordran rice water grass control chemical. Purchased more material this year. Application rate was increased from 30 to 40 lbs. per acre — and no drop in price of the material. Control was lousy.”

See this page at FARM SHOW →
Best BuyWorst Buy

Ford

Charles Archibald, Pine Tree Ranch Co., Gillette, Wyo · Vol. 3, No. 1 (1979), p. 14

Charles Archibald, Pine Tree Ranch Co., Gillette, Wyo: ‘This machine has required less adjustment or repair than any machine ever bought. The company should be commended on their quality control,”’ says Charles of his ‘best buy” Hesston model 6200 windrower. His only complaint is that “the grease fittings are almost inaccessable”’. Charles nominates his Dodge D200 pickup as a worst buy. “It was poorly constructed and warranty work was not done. It has been impossible to keep this engine turned. In the past, our pickups have run over 100,000 miles. This one is shot at 45,000. After buying and driving Dodges for 50 years, this family is going to Ford,"

See this page at FARM SHOW →
Best Buy

Gerald Ohs, Harrison, Mont · Vol. 3, No. 1 (1979), p. 14

Gerald Ohs, Harrison, Mont: “We are happy with our Hesston 60A Stak-Wagon. It allows us to move down large windrows, made with our 14 ft. swather, at a ground speed of 6.8 mph. In ideal conditions, we have stacked up to 20 tons per hour. Another big plus is that it requires very little maintenance — with one exception. We had the wheels crack between the lugs bolts. This we fixed by reinforcing the wheels with 1/4 in. plates."’ Gerald adds that “we are a little disappointed with the strength of the frame on our Bearcat mulcher — packer, To strengthen it, we have welded in many gussets and continue to weld weak spots. We do appreciate the job this machine does, however, especially on fresh-plowed hay ground.

See this page at FARM SHOW →
Best Buy

James Hughes, Charles City, Iowa · Vol. 3, No. 1 (1979), p. 14

James Hughes, Charles City, Iowa: He's well pleased with Bladex Plus Lasso, applied in 20 gal. of 28% liquid nitrogen fertilizer. ‘This was custom applied in a driving rainstorm that started while we were filling the Big A. It gave 99% weed control on all labeled weeds. The check strip we left had a high weed population. However, one field that we combined in the snow had lots of volunteer beans in it. understand that Shell could have a bean label for beans if they wanted to spend several million dollars to get the label changed through EPA.”

See this page at FARM SHOW →
Worst Buy

Vermeer

Bill Ogier, Alpena, Ark · Vol. 3, No. 1 (1979), p. 14

Bill Ogier, Alpena, Ark: ‘It never has run right. No power — kinda lopes down the road and feels like you're riding a horse. Just after the warranty was up, the front wheel bearings went out. About 1000 miles later, the rear spring broke. No dealer response,”’ says Bill of his ‘worst buy” Ford LTD car witha 400 engine. Bill adds that his Vermeer round baler (Model 504) “is one of the simpliest built and easiest to operate machines I've ever run".

See this page at FARM SHOW →
Worst Buy

John Deere

Lyle Fischer, Blanchardville, Wis · Vol. 3, No. 1 (1979), p. 14

Lyle Fischer, Blanchardville, Wis: “I don't have a worst buy but my gripe is with machines not being field ready when offered for sale to farmers. On our baler, a hydraulic coupler came loose and we lost 5 gal. of oil from the kicker. We bought new saddle tanks and a crop sprayer. We had trouble calibrating the sprayer, then discovered that it was impossible to calibrate because of a filter which had been installed backwards at the factory.” Lyle is well pleased with his Deere 336 baler with kicker, noting that “it really eats hay, yet runs quiet. Has a wide pickup for wide windrows”.

See this page at FARM SHOW →
Best Buy

Oregon

Glenn Kurts, Oregon, Mo · Vol. 3, No. 1 (1979), p. 14

Glenn Kurts, Oregon, Mo: Here's what Glenn likes about his “best buy” Noble Cultivator-Tiller. “I'd recommend this machine to anyone for cultivating row crops, especially when the plants are small. Lets you start cultivating early before weeds, volunteer corn, etc,, has rooted very much. We hard surface our shovels and use 4 in. shovels next to the row, then 7 in. We purchased the machine for level cultivating of beans in 1977 but used it this year in place of a rotary hoe. It done wonders. We then follow up with our regular cultivator to throw dirt into the corn.”

See this page at FARM SHOW →
Best Buy

Alden Irish, Belt, Mont · Vol. 3, No. 1 (1979), p. 14

Alden Irish, Belt, Mont: “It's excellent for brazing aluminum irrigation pipe. It's also the best cutting torch set-up I've seen in 12 years of teaching welding,” says Alden of his “best buy" propane cutting torch and brazing tip. “It's manufactured by Quad States Equipment Co., with offices in Great Falls, Mont., and Cody, Wyo. Cost was $339, plus $50 fora 20 lb. propane bottle. By using propane instead of acetylene, you can save about 90% of your acetylene gas costs.”

See this page at FARM SHOW →
Best Buy

New Holland

Leonard Juhnke, Sedgewick, Kan · Vol. 3, No. 1 (1979), p. 14

Leonard Juhnke, Sedgewick, Kan: He's unhappy with his New Holland TR70 combine: ‘Motor, radiator and all cooler screens constantly plugged with chaff. Hydrostatic drive would not pull or propell the machine. Hydraulics would not function due to overheating. Header platform would not feed wheat. Main shaft bearings failed at 246 hours. Four drive belts broke in the first 246 hours. Other constant trouble. The dealer gave the best service he could.”

See this page at FARM SHOW →
Best Buy

New Holland + 1 more

George Huber, Herreid, S. Dak · Vol. 3, No. 1 (1979), p. 14

George Huber, Herreid, S. Dak: “I've baled more than 2.500 bales and haven't had any trouble.”’ says George of his “best buy’’ New Holland 850 round baler. He’s unhappy, however, with his 655 Massey Ferguson 18 ft. swather. **We have breakdowns daily. The sealed bearings go out because of lack of grease. Sickle head dropped off. Very poor welding. Sway bar bracket cracked because the metal is half as thick as it should be. Platform is bowed quite badly — needs more support. It’s made of too light metal, Tension springs for the platform bolts break off. Vibrates excessively at 3/4 speed and faster, On the plus side, lam happy with the hydrostatic drive."’

See this page at FARM SHOW →
Best BuyWorst Buy

International Harvester + 1 more

Jimmie Smith, Elliott, Iowa · Vol. 3, No. 1 (1979), p. 14

Jimmie Smith, Elliott, Iowa: He nominates an International 400 8-row planter, equipped with a Cyclo Il monitor, as his best buy: ‘1 was really impressed with the planter because of its single hopper and speed. But was really surprised with the Cyclo Il monitor. It takes all of the worry out of planting. This was my first 8-row planter and my first air planter so was somewhat apprehensive. But, after the first day, the worry was over. Also, my dealer bent over backwards helping me get started.” Jimmie adds that ‘‘one of my worst buys was a Tiller Rod. I planted in trashy conditions and had a lot of trouble with it dragging trash. Also, I didn't have much luck with the positive depth wheels and covering blades on the International planter. Trash built up in front of the insecticide banding attachment, causing the packer wheels to drag. I traded the wheels back to the dealer for covering disks and solved the problem.” 3UYING TIPS Random farmers it is’ in their ‘‘b ‘‘worst”’ by Harol I Li Best, 8 7 FARM SHow 2-~ ) YOU CAN USE ily selected ‘tell it like nominating est’? and ' buys. d M. Johnson ‘ditor ers Nom Worst B ae eee “I'm having to do a lot of ‘beefing up’ just to keep this machine going,” says Jerry of his 12-row Farmhand cultivator. “It does a good job if conditions are ideal. But, when on rocky soil, the teeth break off right at the shovel, For a cultivator this big, the material it's made of is not strong enough,” Jerry, nominates his Deere 4640 tractor as a best buy. “Its lugging power, compared to any previous John Deere I've seen, is unbelievable. Its engine, teamed up with the power shift transmission, will keep you moving under most adverse conditions. I also like the all-day fuel tank, deluxe seat and quiet cab.”’

See this page at FARM SHOW →