Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 20, No. 2 (1996)

Best & Worst Buys: FARM SHOW Vol. 20, No. 2 (1996)

68 reports from pages 14–16 · 59 Best Buys23 Worst Buys · See everything in this issue at FARM SHOW →

Best BuyWorst Buy

Gehl 1060 forage chopper + 1 more

Gary Berrus, Lowville, N.Y. · Vol. 20, No. 2 (1996), p. 14

Gary’s had trouble with his 1991 Gehl 1060 forage chopper. “It’s a constant battle to keep this machine going. We’ve had a lot of problems with the metal alert unit. Last spring we had to replace all the bearings on the feed rolls. The bearings had grease fittings on them but there were no holes on some of them to let grease into the bearings. If there was a hole it was on the wrong side of the bearing. The company wouldn’t do anything about it.”

He’s impressed with his 1989 New Hol-land 499 hydroswing haybine. “It’s a high capacity machine that can be easily adjusted to lay hay in a wide swath for drying or in a windrow for making silage. We’ve replaced the guards and knives but haven’t had to make any major repairs.”

Best Buy

Irvin rates his 1993 Stihl Cut ‘N Trim string trimmer as his “best buy

Irvin Dey, Newton, Kan. · Vol. 20, No. 2 (1996), p. 14

Irvin rates his 1993 Stihl Cut ‘N Trim string trimmer as his “best buy”. “I use it to trim weeds and grass under an electric fence surrounding my pasture. At first I used string with it, but replacing the string was too much trouble so I switched to a 4-pronged, 10-in. dia. metal disc offered by the company. It has 2 1/2-in. long prongs that can be sharpened on each side so if the prongs get dull I just turn the disc over. Saves time that I’d otherwise have to spend winding on new string.”

Best Buy

Hillsboro 300

Jim Rehfeld, Holly, Colo. · Vol. 20, No. 2 (1996), p. 14

“I like my Hillsboro 24-ft. 300 series flatbed trailer. It’s easy to pull and there’s a lot of room under the gooseneck. The torque axles give it a smooth ride with no bouncing. The trailer is big enough so I can haul large loads of bales without having to stack them too high, and the ramps are handy and easy to install.”

Best BuyWorst Buy

Kawasaki Mule 500 utility vehicle + 1 more

Carl W. Richel, Tensed, Idaho · Vol. 20, No. 2 (1996), p. 14

A 1995 Kawasaki Mule 500 utility vehicle rates as Carl’s “best buy”. “I bought it to use around our farm for doing chores but had no idea that it would be so versatile. It’s probably the only machine I’ve ever bought that has completely exceeded my expectations.

“I’m disappointed with my Wagner power painting system. It has never worked right. The O-ring in the backpack cover leaks, and it’s almost impossible to get the paint mixed right so that it doesn’t splatter and drip.”

Best Buy

Soy Clean industrial solvent

Marion Denlinger, New Paris, Ohio · Vol. 20, No. 2 (1996), p. 14

“I likeSoy Clean industrial solvent (Interchem Environmental Inc., Overland Park, Kan. 66214). It’s an all-purpose cleaner and solvent that’s 100% biodegradable and is made from American-grown soybeans. It’s the best hand cleaner I’ve found for my shop. It’ll remove almost anything, including dried-on paint. It washes off with a little liquid soap and water, leaving me with the cleanest hands around.”

Best Buy

Preiffert cattle working tub

Jo Stec, Long Pine, Neb. · Vol. 20, No. 2 (1996), p. 14

“My 1990 Preiffert cattle working tub is a sturdy, convenient system. The panels are high enough that cattle can’t jump over them yet light enough that one person can move them. Cattle flow through the system easily and seem to suffer little stress.”

Best BuyWorst Buy

Morton shop building + 2 more

Everett Lemke, Dahlgren, Ill. · Vol. 20, No. 2 (1996), p. 14

Everett’s happy with his 66-ft. wide, 120-ft. long Morton shop building. “It’s easy to heat because the insulation and plastic on it don’t allow any outside air to come through. We use an oil-burning heater to heat it, and the temperature stays the same throughout the entire building without any cool spots.”

On the “worst buy” side, he’s disappointed with his 1993 Blu-Jet V-ripper. “It kept breaking shear bolts and three of the five shanks got bent. The points continually broke, and if they didn’t break they wore out too fast. I replaced it with a new DMI rig.”

Best Buy

Honda 300 4-WD ATV

Dave Pohlman, Deshler, Neb. · Vol. 20, No. 2 (1996), p. 14

“I’m satisfied with my 1990 Honda 300 4-WD ATV. No problems and I always enjoy using it. However, I wish I didn’t always have to shift gears with my foot - it wears a hole in my shoe. I also wish it had cruise control. I use it with a trailer to haul corn to my cattle and also to spray weeds.”

Worst Buy

Tri-H Corp

Edward F. Bowers, Philo, Ill. · Vol. 20, No. 2 (1996), p. 14

Two years ago Edward bought lawn mower blades from Tri-H Corp. and says they’re his “worst buy”. “The blades cut well for about 15 minutes, then get dull. One of the blades got bent after I mowed over a small gopher mound. After a half hour of use I removed them and shipped them back to the company within the 30-day warranty period. However, so far I’ve received no refund. I called the company twice but got no action. The blades are made from metal that’s too soft.”

Worst Buy

E-Zee

Edward Butcher, Winifred, Mont. · Vol. 20, No. 2 (1996), p. 14

“Our E-Zee ‘bloodless’ castrator’ is our worst buy. It’s difficult to crimp the testicles tight enough to cut off the blood supply so that they’ll dry up and drop off. Over half our animals became infected and had to be treated intensively. We’ve used rubber elastorator bands on baby calves for 40 years with almost 100% success, so we’re very disappointed with the poor results of this product.”

Best Buy

John Deere no-till drill

Fred Berning, Minster, Ohio · Vol. 20, No. 2 (1996), p. 14

Fred nominates his 1995 Deere no-till drill as his “best buy”. “It has better seed depth control than other no-till drills we’ve used in the past. The result is more even emergence which helps in weed control because we’re on a postemergence herbicide program. The even emergence is also important to us wherever we reduce herbicide rates.”

Best Buy

John Deere 4960 MFWD tractor + 1 more

Gene Brumbaugh, Cascade, Idaho · Vol. 20, No. 2 (1996), p. 14

“I bought a 1994 Deere 4960 MFWD tractor and liked everything about it. Then the dealer called and said the factory had put the wrong bolts inside the rear end. They had to split the tractor apart and remove the cab. When the tractor came back it leaked oil and the hydraulic controls didn’t work. Those problems have been fixed now, but I didn’t expect this to happen on a new tractor.

“I bought a new 30-ft. Deere 455 press wheel drill and had to put two wide baler wheels and tires on it in order to keep it from sinking into the ground on turns. It should come from the factory with four large tires.”

Best Buy

Tye

Richard Roth, Scott City, Mo. · Vol. 20, No. 2 (1996), p. 15

A 1993 Tye series V 7-ft. Pasture Pleaser no-till grain drill equipped with 3/4-in., 13-wave coulters rates as Richard’s “best buy”. “I’ve used it to plant three wheat crops and had good stands each time. In corn ground I shred the stalks before planting. I’ve also used it to no-till soybeans and to double crop beans after wheat with good results. The only trouble I’ve had is with double crop beans if the ground is too dry. But if it’s that dry I wouldn’t get a stand if I worked the ground, either. It definitely reduces soil erosion.”

Best Buy

McCulloch F1000 high pressure washer

Tom Johnson, Minatare, Neb. · Vol. 20, No. 2 (1996), p. 15

“The McCulloch F1000 high pressure washer I bought 1 1/2 years ago is my best buy. It’s easy to set up and has enough pressure to clean almost anything. The spray nozzle has four settings - one for applying soap, wax, or chemicals; a 1,000 psi vertical fan spray; a 1,000 psi jet spray (this setting will even remove paint); and a 1,000 psi jet horizontal fan spray.”

Best Buy

Mirafount energy-free waterer five + 1 more

Roger and Louise Linton, Terre Bonne, Ore. · Vol. 20, No. 2 (1996), p. 15

“We installed our Mirafount energy-free waterer five years ago and haven’t touched it since then. It serves about 150 cows and several horses. Works perfectly even in sub-zero weather. We’ve never had to clean it out.

“We also like our 1995 Powder River calving pen that’s equipped with a self-catching headgate. It’s real handy for pulling calves and helping them to nurse, and for doing artificial insemination work.”

Best Buy

Ag Leader Yield Monitor 2000

Brian Litwiller, Delavan, Ill. · Vol. 20, No. 2 (1996), p. 15

Brian’s impressed with his Ag Leader Yield Monitor 2000 (Ag Leader Technology, 1201 Airport Road, Ames, Iowa 50010). “We installed it on our Deere 8820 combine two years ago. It came with everything we needed including detailed instructions, templates, a center punch, drill bits, and a file for squaring the holes. It can be recalibrated all season long and can adjust earlier harvest data for accuracy. The company has updated the computer chip three times in two years at no cost. I wouldn’t want to harvest without the instant information on yield, moisture, and acres covered that it provides.”

Best Buy

Taylor outside wood-fired hot

Steve Lacey, Wheaton, Mo. · Vol. 20, No. 2 (1996), p. 15

Steve likes his 1994 Taylor outside wood-fired hot water furnace. “We use it to heat our house and milking parlor. It provides the economy of wood heat without the hazard of chimney fires. Also, it leaves no ashes or smoke in the house which my wife really likes because of her allergies.”

Best Buy

Ram 250 pickup equipped

James Nedrow, Ashton, Idaho · Vol. 20, No. 2 (1996), p. 15

“My 1991Dodge 250 pickup equipped with a 5-speed manual transmission and Cummins turbocharged engine is my best buy. I like being able to drive down the highway at 65 mph with the tachometer reading 1,800 rpm’s. I get 20 to 25 mpg solo and 15 mpg pulling a fifth wheel recreational vehicle. I finally have the pickup I’ve always wanted.”

Best BuyWorst Buy

Ford Splash Ranger extended cab 4-wd + 1 more

Sherri Huffman, East Jordan, Mich. · Vol. 20, No. 2 (1996), p. 15

“Our 1994 Ford Splash Ranger extended cab 4-WD pickup has never let us down and can go almost anywhere. It always starts right up. No problems.

“Our 1993 Chevrolet 1-ton 4-WD, 4-door truck equipped with a 6.5-liter turbocharged diesel engine is our worst buy. We’ve had over 100 problems with it and it’s been in the shop over 20 times. There have been problems with the engine, front end alignment, special options, etc. If it hadn’t been for friends I’d have been stranded several times.”

Best BuyWorst Buy

Case-IH 7130 Magnum tractor + 1 more

Brandon Toepfer, Lewellen, Neb. · Vol. 20, No. 2 (1996), p. 15

“Our 1994 Case-IH 7130 Magnum tractor is our best buy. We bought it used with 300 hours and now it has over 2,000 hours with no problems. It’s our most economical tractor.

“Our worst buy ever was a 1981 Deere 4440 tractor equipped with a powershift transmission. We had it for four years and put 1,500 hours on it. The biggest piece of equipment it pulled was a 21-ft. Deere disk, but it still went through five different transmissions.”

Best BuyWorst Buy

Stihl 026 chainsaw equipped + 1 more

Merritt Broughton IV, Silver Springs, N.Y. · Vol. 20, No. 2 (1996), p. 15

Merritt’s impressed with his 1995 Stihl026 chainsaw equipped with an 18-in. bar. “We bought this saw so that we’d have something lighter than our 041. It has a lot of power, is lightweight, and durable. We use it to cut wood to heat our large house as well as a 70 by 48-ft. shop. We also use it to cut logs for lumber. I’m so impressed with it that I may buy another one.”

On the negative side, he lists his 1994 Case-IH 695 tractor equipped with a 2250 front-end loader. “It arrived at our farm with leaking hydraulic lines. The loader frame hits the front mounting bracket every time the loader is lowered to the ground. Another problem is that the engine is incredibly noisy. When cutting hay we can run it at 3/4 throttle for only a half hour before we’ll be deaf for the rest of the day. We love red tractors but this is a case where we should have looked at some green paint.”

Best Buy

Ford F-350 crew cab pickup

Tim Jenkins, Quincy, Wash. · Vol. 20, No. 2 (1996), p. 15

“It’s fuel efficient, rides great, and has a lot of power,” reports Tim, pleased with his 1995 Ford F-350 crew cab pickup equipped with a 7.3-liter powerstroke diesel engine. “We use it to pull a fifth wheel trailer with 14,000 lbs. on it and it handles it great.”

Worst Buy

Chevrolet S-10 4-door Blazer

Dayne Hill, Edinburg, Texas · Vol. 20, No. 2 (1996), p. 15

“It’s a real lemon,” says Dayne about his 1994 Chevrolet S-10 4-door Blazer. “The engine quit running four times just like it does when you shut off the ignition key. I’ve taken it to two different dealers and every time I go in they find a new problem. The first time it was a bare wire, the second time a bad computer chip, the third time a fuel pump. After a new fuel pump was installed I drove it only 12 miles before it quit running again. This time the problem was another bare wire. I’m just waiting for more problems.”

Best Buy

Ford 7700 tractor equipped

Jerry D. Gibby, Sulphur Springs, Texas · Vol. 20, No. 2 (1996), p. 15

“My best buy is my 1980 Ford7700 tractor equipped with a cab and air conditioning. It has 7,300 hours with no problems. It uses very little oil and works great. I use it to make round bales. But then, my wife said that if she was going to continue helping me cut and rake hay she’d need a tractor with an air-conditioned cab. So we bought a Ford 7710 tractor equipped with a cab and air conditioning. It’s also a best buy. It has 2,300 hours with no problems.”

Best Buy

FarmDayta

Victor F. Pochop, Atwood, Kan. · Vol. 20, No. 2 (1996), p. 15

Victor likes the information service offered by FarmDayta. “It’s easy to use and can be custom tailored to fit my needs. Markets, news, weather, etc., are updated in a timely manner. The company also offers a wide choice of premium services.”

Best Buy

Miller Millermatic 90 wire welder

Dale Pontius, Marshall, Mo. · Vol. 20, No. 2 (1996), p. 15

“I’m well pleased with my 1993 Miller Millermatic 90 wire welder. It’s a light duty, 115-volt MIG welder that works well on 20 ga. through 11 ga. or 1/8-in. thick steel. It also does a respectable job on 3/16 and 1/4-in. thick steel if it’s grooved before welding. It’s set up to use .023 in. LR708-6 wire and argon/CO2 shielding gas.”

Best Buy

Interna-tional culti-mulcher + 1 more

Charles Kretz, Defiance, Ohio · Vol. 20, No. 2 (1996), p. 15

“It might be old fashioned these days to till the soil, but whenever I do I use my Interna-tional 15-ft. culti-mulcher. It’s easy to adjust depth of the spring teeth. It’s built strong and heavy enough to crush clods, and the rear ‘crow feet’ leave the soil level. I use my International 706 tractor to pull it. It has over 7,000 hours but it still can really snort.”

Worst Buy

Snapper riding mower

David Brown, Gooding, Idaho · Vol. 20, No. 2 (1996), p. 15

“My 1994 Snapper 22-in. riding mower is my worst buy. It was a piece of junk from the day I bought it. The engine burned oil and smoked like a diesel, then blew up after only one month of use. It never started reliably. I had the valves ground and the engine overhauled, but it was still difficult to start and would run only for about 10 minutes before quitting. The self-propel drive mechanism failed, too. I finally junked it and bought a no-name brand model that works perfect.”

Best BuyWorst Buy

Gleaner R72 combine equipped + 1 more

Gene Delap, Broughton, Ill. · Vol. 20, No. 2 (1996), p. 15

Gene’s the satisfied owner of a 1995 GleanerR72 combine equipped with an 8-row corn head or 25-ft. reel. “One of the things I like best about it is the L10 611 cu. in., 300 hp Cummins diesel engine. It’s very fuel efficient, has a lot of power, and is easy to maintain. It has tremendous capacity and has needed only minor repairs.

On the “worst buy” side are the Yetter heavy duty downpressure springs that he bought for his Deere 16-row front-fold planter. “I bought 64 springs - four for each row - but after only two seasons of use 17 of them were broken. I complained to my dealer and he replaced them but some of them broke. Finally he called the company and they gave me an entire set of new, improved springs. However, I had to personally replace all of them which took a lot of time.”

Best BuyWorst Buy

Case-IH 8840 self-propelled swather + 1 more

Karl Kahn, Belpre, Kan. · Vol. 20, No. 2 (1996), p. 15

“My 1991 Case-IH 8840 self-propelled swather is my best buy. The 4-cyl. Cummins diesel engine works great and is fuel efficient. It has a lot of speed and drives comfortably.”

On the minus side, Karl lists his 1994 Dodge 2500 4-WD V-10 pickup. “The day I bought it I didn’t even make it home because the computer went out. The second day the windshield broke when I slammed the driver’s door shut. It’s gone through three steering boxes and three windshields and has had brake problems from day one. Also, the transmission leaks. But the worst problem is that the intake manifold gaskets are made from material that’s too thin so dirt was getting sucked in.”

Best BuyWorst Buy

John Deere 348 twine-tie baler + 1 more

David Woller, Montague, Mich. · Vol. 20, No. 2 (1996), p. 15

“My Deere 348 twine-tie baler has tremendous capacity and is a best buy. I’ve used it to make at least 50,000 bales and it probably hasn’t failed to tie more than 20 of them. I like the multi-luber for the bale knotters.

“My Gehl 2240 swing frame mower is my worst buy. It tends to plug up in heavy hay and doesn’t raise up very high. Also, it doesn’t seem to be built strong. The reel and push bar bent the first day we used it. Our dealer took good care of us, though, and replaced all the defective parts with new ones.”

Best Buy

John Deere 2940 MFWD tractor equipped

D. H. Miller, Chalmers, Ind. · Vol. 20, No. 2 (1996), p. 15

“My best buy is my Deere 2940 MFWD tractor equipped with a 260 front-end loader. It’s been used hard for 10 years and nearly 7,000 hours on our hog operation where we’ve used it to grind over 3,000 tons of feed each year. It’s equipped with an M & W Gear turbocharger and the fuel pump is set 25% over. As a reward for the tractor’s trouble-free service we bought new seat cushions for it and turned up the fuel an additional 10%.”

Best Buy

Bobcat 753 skidsteer loader + 3 more

Wayne Grebinoski, Holdingford, Minn. · Vol. 20, No. 2 (1996), p. 15

Wayne’s the owner of a “best buy” 1994Bobcat753 skidsteer loader. “It’s truly a well-built product. It’s my second Bobcat and both have performed very well. They’re easy to service and trouble-free. We use them every day to load manure, move round bales, haul silage, etc. They always start right up no matter what the conditions. I’d definitely buy another one.

“I like my 1993 New Holland 570 square baler. It has a lot of capacity and does a good job of tying bales.”

On the minus side, he lists his Gehl 1060 forage harvester. “It seemed that I couldn’t use it for even a single day without something going wrong on it. Soon after it was delivered to our farm the wheel bearings went out. The roller chains wore out fast and other bearings also went out. The blower bands lasted for only one season. It has a lot of capacity but requires a lot of power. Also, parts for it were expensive. I got rid of it and bought a 1995 New Holland 790 forage harvester which I really like. It’s much easier to service and pulls easy.”

Best Buy

United Farm Tools 565 grain cart + 1 more

Gary Nonamaker, Cedar, Kan. · Vol. 20, No. 2 (1996), p. 16

“I purchased a United Farm Tools 565 grain cart last year. Early this year we were notified by our dealer that the cart needed a company update. I was very surprised when two men from the company came to our farm and installed a complete set of new augers on the cart. I wish everything I buy would have that kind of service and company followup. I’d recommend the company’s products to anyone.

“I’m well satisfied with the three Case-IH Magnum tractors I’ve purchased since 1988. They’re all excellent tractors.”

Worst Buy

AgBag Silopress XPIII

K.J. Thornton, Didsbury, Alberta · Vol. 20, No. 2 (1996), p. 16

“My worst buy is my 1990 AgBag Silopress XPIII. It was evident after delivery that it wasn’t a new piece of equipment and that it didn’t have all the parts. The machine had to be modified in order to get it into running order and it hasn’t performed satisfactorily in any way. Attempts to get the problems resolved have proven futile. I wonder if other readers have had this problem.”

Best Buy

Kemper 3000 corn silage head

Clark C. Phillips, North Collins, N.Y. · Vol. 20, No. 2 (1996), p. 16

“We’ve used our Kemper 3000 corn silage head to harvest over 300 acres of corn for six years with just one repair - a broken shaft - and almost no maintenance. It’s a simple, well-built machine and our best buy.”

Best BuyWorst Buy

New Holland 660 autowrap round baler + 1 more

Kevin Jones, Mound Valley, Kan. · Vol. 20, No. 2 (1996), p. 16

“It’s simple and easy to operate and makes nice, tight bales,” says Kevin, pleased with his 1994 New Holland 660 autowrap round baler.

“I’m disappointed with my 1995 Deere 450 grain drill. The depth gauging press wheels are hard to adjust and I can’t get it to cover the seed adequately. It just scatters seed on top of the ground. It was put together wrong when it was delivered so I had to change some things. But it still doesn’t work right.”

Best BuyWorst Buy

Bramco + 2 more

Michael O. Scheel, Goodman, Mo. · Vol. 20, No. 2 (1996), p. 16

“I bought a heavy duty pickup bumper equipped with twin hydraulic bale spears made by Bramco of Fairview, Okla., and distributed, installed, and serviced by Jespersen Mfg. & Sales, Inc., Neosho, Mo. It’s my best buy. The spears can be easily removed with pins to eliminate bed clutter. I can use it to haul and feed round bales from the comfort of my pickup cab. An additional inexpensive unroller attachment allows me to unroll the bale. I’ve used it for five years with no problems. All I do is grease it. Custom painted or chrome bumpers are available.

“My 1986 Ford F-250 pickup equipped with a 6.9-liter diesel engine is my worst buy. Not one gauge still works on it and some gauges haven’t worked for five years. The oil pressure gauge, both fuel gauges, tachometer, glow plug controller, ignition switch, emergency brake, 6-volt lights, and water fuel separator all don’t work. Parts for it are expensive.

“My 1981 Ford F-150 equipped with a 300 cu. in. 6-cyl. engine is a better pickup by far.”

Worst Buy

Belarus 562 tractor

Randy A. Shannon, Broadus, Mont. · Vol. 20, No. 2 (1996), p. 16

Randy says a Belarus 562 tractor with front wheel assist is one of his more disappointing buys. “I’ve had to rebuild the gear box between the front drive shafts twice. It’s hard to start at temperatures below 35 or 40° F and the air conditioning has never worked,” he says. “Still, it’s easy on fuel, easy to work on, and has good visibility from the cab. We bought it new in 1988 and it now has 875 hours.”

Best Buy

John S. Barnes Corp

Sid Powell, Rocheport, Mo. · Vol. 20, No. 2 (1996), p. 16

A John S. Barnes Corp. (2222 15th St., Rockford, Ill. 61125; ph 815 398-4400) 12-volt hydraulic power unit for operating the bale spear on his pickup is one of Sid’s “best buys”. “The hydraulic pump and ram are much faster than the spike and winch I used for years to feed hay. The unit was easy to install, it’s more dependable, and is fairly economical.”

Best Buy

Bio Tech canvas livestock shelter

Mike Ruppert, Wapakoneta, Ohio · Vol. 20, No. 2 (1996), p. 16

“A Bio Tech canvas livestock shelter (AM-CAN, R.R. 2, Box 103, Bloomington, Ill. 61704; ph 309 663-5153) I built in July of 1994 is my ‘best buy’. It’s cost effective and excellent for raising hogs. It was simple to put together. No electricity is needed, saving a lot of overhead expenses. We finish 200 head of hogs at a time in our 78 by 30-ft. shelter. I like the first one so much I’m planning to put up another this year.”

Worst Buy

Polaris 435 Magnum 4-WD atv

Alex E. Wolter, Holcombe, Wis. · Vol. 20, No. 2 (1996), p. 16

“My ‘worst buy’ is the Polaris 435 Magnum 4-WD ATV I bought new in 1995. After only three days a tie rod end fell off. The engine was so full of oil, that some was sucked into the air filter box. Poor engineering in the front end (front wheels are too far out at the bottom) makes short turns impossible. All 400 series Polaris 4-WD’s have this problem. My dealer called the company to complain on my behalf, but he says if he complains too much he’ll lose his franchise. So I called Polaris three times to complain myself. All I got was their answering service and no answer. Then I wrote a letter but still got no answer. I’ve been a loyal Polaris customer for a long time, but no longer if this is the way they do business.”

Best Buy

John Deere 610 single depth control

Richard Kouba, Regent, N. Dak. · Vol. 20, No. 2 (1996), p. 16

In Richard’s nearly 40 years of farming, a 1987 Deere 610 27-ft. single depth control chisel plow has “aggravated” him the most. “The first day in the field we couldn’t get it in the ground with 16-in. sweeps on. The dealer told us to put some washers on the top bolt between the sweeps and shank. We did, but then one or both wings would suck into the ground and push up the middle section. Soon the dealer closed his door and our problems were transferred to another Deere dealer. Currently, the chisel works after a fashion, but we still never know what depth it will choose to work at. I am not happy, and never have been, with this machine. In my opinion, Deere should have recalled it and melted it down into plowshares.”

Best Buy

Case-IH 5140 tractor + 1 more

George E. Hawker, Jr., Frederick, Md. · Vol. 20, No. 2 (1996), p. 16

“My Case-IH 5140 tractor has an excellent, powerful engine that doesn’t smoke at all on hard pulls. The cab is comfortable with excellent visibility,” George says. “I also like my Knight3300 Reel Auger TMR mixer. It does a better job of mixing than our old three auger mixer and a four auger mixer we tried before buying this unit. All the material in the box moves with no dead spots.”

Best Buy

Knight Mini Auggie TMR mixer

Clarence P. Mess, Watertown, Wis. · Vol. 20, No. 2 (1996), p. 16

Clarence liked a Knight “Mini Auggie” TMR mixer so much that when his first one wore out, he bought a second one. “Service is outstanding. The factory service manager has met me at 10:30 at night to take me to the factory to get parts. We’ve never missed a feeding.”

Best Buy

John Deere 4440 tractor

John Meisch, Altura, Minn. · Vol. 20, No. 2 (1996), p. 16

Two of John’s “best buys” are a 1979 Deere 4440 tractor and a 1993 Deere 3950 forage chopper. “The tractor has plenty of hydraulic power, shifts easily, and is a pleasure to drive,” he says. “The design of the forage chopper is simple, making it easy to maintain. It does a great job chopping material.”

Best Buy

Agri-Speed Hitch

Geraldine Lulth, Emerson, Neb. · Vol. 20, No. 2 (1996), p. 16

“I used to have to back up five or six times to hook up the tractor and wagon until my husband bought our Agri-Speed Hitch (Bergman Mfg. Inc., 2984 Quail Ave., Arthur, Iowa 51431; ph 800 677-8329),” Geraldine says. “Now I can hook up in no time. Unhooking is a snap, too. I simply pull on the cable to release the device, then drive forward and the wagon is unhooked. No more getting out of the cab to pull pins.”

Best BuyWorst Buy

New Hol-land swather + 1 more

Bruce Koonce, Caldwell, Idaho · Vol. 20, No. 2 (1996), p. 16

“It’s the most aggressive hay machine I’ve ever seen,” says Bruce about a 1994 New Hol-land 22550 swather. “It will cut heavy first cutting hay which is laid flat without plugging. It simply does an excellent job and we’ve had no trouble with it. “We’ve had trouble with the computer on a Deere4555 2-WD tractor we purchased with 440 hours on it. It shuts the hydraulic system down as well as most of the gauges. We also recently had to replace three injectors.”

Best Buy

Deutz tractors

Doug White, Unity, Sask. · Vol. 20, No. 2 (1996), p. 16

“Eight is enough, and that’s the number of Deutz tractors I’ve owned. It’s now time to switch brands. When the clutch went out of my 1988 Deutz 7145 with only 1854 hrs., it was the last straw. My Deutz tractors were bought between 1962 and 1989. If Deutz would have continued with the great quality they put in my 1977 model 100.06, they would never have had to sell out to Agco. The newer and bigger models were harder on fuel and more expensive to maintain. The 100.06 has 104 hp. and uses just 3 gph. but my 7145 with 145 hp. used 6 gph. Last summer I traded the 7145 for a 1982 Versatile 835 that’s a best buy. At 235 hp., it uses just 8 gph. and when I use it to pull the same loads I pulled with the Deutz 7145, it only uses 4 gph. It has an 855 cummins 6-cyl. engine which starts and runs great. It’s a simple, well-built tractor.”

Worst Buy

Ford Ranger pickup failed

John Tierney, Minneapolis, Minn. · Vol. 20, No. 2 (1996), p. 16

The front hubs on his 4-WD 1994 Ford Ranger pickup failed at 41,000 miles, just after the 36,000 mile warranty expired. “They should not have failed so soon, especially since the truck is used primarily for highway driving. I don’t abuse it at all. The dealer ended up paying $500 of the $1,000 repair cost, but I think Ford should have paid for the whole repair since it was obviously a manufacturing defect. I’ve been told this is a widespread problem with this model.”

Best Buy

I’m extremely pleased with the add-on steps for my 1966 Deere 4020 tra

Robert H. Milburn, Logansport, Ind. · Vol. 20, No. 2 (1996), p. 16

“I’m extremely pleased with the add-on steps for my 1966 Deere 4020 tractor that I bought recently after reading about them in FARM SHOW. They’re made by Pat Michels, Rt. 2, Box 323, Chippewa Falls, Wis. 54729. They fit the tractor well and make it a lot easier to climb on than it was originally. The steps themselves are deeper, making them easier and safer to use. They’re built heavy to last.”

Best BuyWorst Buy

Chevrolet Silverado 3/4-ton pickup equipped + 1 more

H.E. Weisenborn, Dayton, Ohio · Vol. 20, No. 2 (1996), p. 16

He nominates his Chevy Silverado 3/4-ton pickup equipped with a 350 cu. in. engine and four-speed automatic transmission as “best buy”. “It’s logged 136,000 tough miles and required only routine maintenance,” he says. “I haven’t had to add a quart of oil in thousands of miles. It still looks like it has only 36,000 miles on it. It’s simply a great truck. “My ‘worst buy’ is a Gravely 166 lawn tractor with 50-in. mower deck attachment. The foot clutch is always out of adjustment. Also, the turning radius is so big that you spend a great deal of mowing time making big wide circles.”

Best BuyWorst Buy

Stihl 025 chain saw + 1 more

Michael S. Dwyer, Wallingford, Ct. · Vol. 20, No. 2 (1996), p. 16

One of Michael’s “best buys” is his Stihl 025 chain saw that be bought new last spring. “It’s an excellent saw for brush-cutting and is easy to handle.”. On the negative side, Michael lists a Herd M96 grass seeder he purchased the same day as his Stihl chain saw. “I received the seeder in its shipping box and it had many dented and bent parts,” he says. “The unit was painted after it was assembled and a lot of parts, including the slide, were stuck together. I notified the company and received a less-than-apologetic letter from the president, which greatly disappointed me.”