Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 1, No. 4 (1977)

Best & Worst Buys: FARM SHOW Vol. 1, No. 4 (1977)

18 reports from pages 10–11 · 18 Best Buys0 Worst Buys · See everything in this issue at FARM SHOW →

Best Buy

John Deere + 1 more

Ron Spencer, Claremont, S. Dak · Vol. 1, No. 4 (1977), p. 10

Ron Spencer, Claremont, S. Dak: Ron Spencer, Claremont, S.Dak. We sent Ron and other randomly selected readers throughout the U.S, a survey questionnaire, asking them to “tell it like it is’ in nominating their ‘best’ and “worst" buys in the last 12 months or so. This special report is based on the responses we had received as this issue went to press. In addition to FARM SHOW, Ron who admits to being “strictly a John Deere man" — nominated a 1070 Case tractor as one of his “best” buys. ‘The reason bought the Case is that there weren't any John Deeres to purchase at the time, The Case is a very good tractor in regards to the cab and operating controls. The cab is very clean and quiet, and the air conditioning system is great. The tractor is easy to service and adjust,”” explains Ron, who also cited a few features he doesn’t like: **The rear wheels are a headache to change to different widths and the hydraulic system is difficult to hook up,” As in previous surveys, the importance of buying from a dependable dealer came through loud and clear: “It's been longer than 12 months inate sUYS but the lemon taste lingers on,” laments

See this page at FARM SHOW →
Best Buy

Allis-Chalmers + 4 more

Norman Culverwell, Craig, Colo · Vol. 1, No. 4 (1977), p. 10

Norman Culverwell, Craig, Colo: Norman Culverwell, Craig, Colo.. says his new Stieger Cougar is “the ultimate in a farm tractor. It’s comfortable, quiet and the caterpillar en“Tt’s been longer than 12 months but the lemon taste lingers on.” gine has a sufficient amount of power for any job.” Norman notes that he’s unhappy with his Allis Chalmers hillside combine which. he says, “gave problems from the minute it was put to work. The block man was called several times but never showed up. Most problems were related to the hydraulic system.” Norman also faults his Melroe plow, noting that “it broke up and wore out all over. The manufacturer claimed the dealer didn't have it adjusted properly. The dealer did several repairs and lots of welding on pieces that should have been replaced by the factory.” “Pearce Equipment at Clay City has taken good care of the service,”’ says Stanley Greathouse, Johnsonville, lll, who nominates his Case 1370 tractor as his “best” buy: “I've used this tractor one year and have been happy with performance and horsepower. It has a good cab, heater and air conditioner,” Dealers were directly responsible for “best” and “worst” buys nominated by William Allegar, Benton, Pa. He’s happy with the dealer he dealt with in buying his Ford 5000 tractor: “Had a few problems with it but the dealer was very cooperative. Fuel economy is very good and I'll be back for further business.” William is unhappy with after-the-sale service he got from the dealer who sold hima new IH 400 Cyclo air planter: “It developed a hydraulic oil leak when lifting the planter. Dealer didn’t want to know me after I paid cash for the machine.” That same make and model planter was one of the “best buys” Sackreiter Farm, St. Charles, Minn., has made: We planted over 300 acres of corn in a few short days and everything worked like a clock after a few minor adjustments," says Leon Sackreiter of their new IH 400 Cyclo 8-row air planter. ‘The Dickey-john monitor was well worth the extra investment.” Leon notes that a Gehl 2500 skid loader, purchased 8 months ago, “works very well when everything

See this page at FARM SHOW →
Best Buy

Allis-Chalmers + 1 more

Clifford Kuskie, Nebraska · Vol. 1, No. 4 (1977), p. 11

Clifford Kuskie, Nebraska: Clifford Kuskie. of Brule, blames improper installation of air motors for his dis-satisfaction with an 8-row Allis Chalmers air planter: “The AC fieldman told me the air motors were running too slow, Real cause was the dealer who had “As long as a company treats me this way I see no reason to change brands. only installed three air motors instead of four. The planting was very uneven and hard to keep ata uniform depth. Air could not hold the seed in the holes of the plate. Skips and doubles were common. Installing one air blower per two rows did help some,” reports Clifford, who ended up trading it for a 7100 Deere planter which, he says. “did an excellent job". Here’s how other farmers who nominated new corn planters size them up:

See this page at FARM SHOW →
Best Buy

John Wynill, Kirwin, Kan · Vol. 1, No. 4 (1977), p. 11

John Wynill, Kirwin, Kan: John Wynill, Kirwin, Kan.: He bought a rear-folding planter toolbar from Kinze Mfg,, Williamsburg, lowa, and equipped it with 16 Buffalo planter units (30 in. spacing): “We had wanted to go toa larger planting unit for some time. This was the first unit that would fold easily for transport and flex in the middle in the field. Previously marketed toolbars with 12 or 16 rows were too rigid for use on uneven ground. While this unit is expensive, it is very well built and enables one operator to do the

See this page at FARM SHOW →
Best Buy

John Deere

R. L. Hargroves, Melvin, Texas · Vol. 1, No. 4 (1977), p. 11

R. L. Hargroves, Melvin, Texas: R. L. Hargroves, Melvin, Texas. He notes that his Deere 4430 tractor was giving good service when the final drive went out after 3 years and 2700 hours. ‘Deere and Co, extended the warranty,” says Hargroves, who also lists a Deere 7700 combine as a ‘best’ buy: “The machine has had some problems but they've been corrected eagerly by dealers, The new 224 platform does everything the company says it will, and more. This machine is the best one out of five 7700's I've purchased since 1971." In Nebraska,

See this page at FARM SHOW →
Best Buy

John Deere

Buckey Jones, Smithdale, Miss · Vol. 1, No. 4 (1977), p. 11

Buckey Jones, Smithdale, Miss: Buckey Jones, Smithdale, Miss.: “Deere's Max-Emerge planter (7100) is by far the best planter that I have ever used. Every seed is planted at a uniform depth and rate, insuring a perfect stand every time.” He's disappointed with his Deere 8200 grain drill: “This grain drill will not plant ata uniform depth, nor will the rate of seed planted remain constant. It is impossible to get both sides of the drill to plant at the same rate.”

See this page at FARM SHOW →
Best Buy

Eugene Elsner, Langford, S. Dak · Vol. 1, No. 4 (1977), p. 11

Eugene Elsner, Langford, S. Dak: Eugene Elsner, Langford, S. Dak.: “The only machine I've bought in many years that could use without rebuilding is a Herman harrow. Bought it about five years ago and even on it we had to add grease fittings to the wheels,” says Eugene. He's also happy with his new Lubbock vibrating ripper plow: "The vibration action settles the soil after loosening it. That's the good part. It was the same untested design deal that you get with new machines — hitch bent, gauge wheel axles bent, and no grease or fittings in the wheel bearings.”’ Eugene is disappointed with his 1976 Chevrolet K10 4-wheel drive pickup, “First, the little things. It took three new air-conditioner thermostats until one worked, The choke wasn't connected when delivered. Air leaked out the radial tires until I put tubes in them."’ Eugene says these and other “little things” he could live with but what really disturbs him is “a rumbling vibration that comes and goes. We did all the standard things — got the shafts running true, checked angles, and replaced one shaft assembly. Then, found out you can't get it smooth. It will be smooth for a ways then rough a ways."

See this page at FARM SHOW →
Best Buy

Ivan Block, Hereford, Texas · Vol. 1, No. 4 (1977), p. 11

Ivan Block, Hereford, Texas: Ivan Block, Hereford, Texas: Heading his “best buy” list is a Deere Max-Emerge planter (model 7100): “In this area, we plant on beds and, with this planter, have complete control of planting depth, It cuts a‘V’ in the soil, drops seed in the bottom, and presses the soil from the sides of the trench. mounted a rolling bed shaper on the front which firms the bed in front of the planter.’ New tillage equipment topped a number of ‘best buy"' lists. Here are the machines mentioned in our random survey, and why owners are “sold” on their performance:

See this page at FARM SHOW →
Best Buy

John Deere

William Williams, Eddyville, Ky · Vol. 1, No. 4 (1977), p. 11

William Williams, Eddyville, Ky: William Williams, Eddyville, Kty.: He reports that ‘“Deere's new no-till attachment for their 7000 planter is the best no-till I've seen."’ Other “best buys" he's made include a Deere 4230 tractor with quadrange transmission (‘‘we've been extremely salisfied with the tractor's performance and especially the way the transmission works") and a Sidewinder rotary cutter (15 ft., fold-up type.

See this page at FARM SHOW →
Best Buy

Carroll Harvey, Palacios, Texas · Vol. 1, No. 4 (1977), p. 11

Carroll Harvey, Palacios, Texas: Carroll Harvey, Palacios, Texas: “This is a very good piece of cultivating equipment,” he says of his single gang tine Dickeyvator cultivator, from Dickey Machine Works. “It's very easy to adjust and does an excellent job of cleaning out weeds and grasses in cotton, milo and soybeans. With its vibrator shanks, it shakes dirt off the roots of weeds and grasses and, within an hour, they are wilting and dying.”

See this page at FARM SHOW →
Best Buy

James Woodruff, Thomasville, Ga · Vol. 1, No. 4 (1977), p. 11

James Woodruff, Thomasville, Ga: James Woodruff, Thomasville, Ga.: He's “sold” on his Lely Rotterra: “It does a fine job incorporating herbicides and preparing seedbeds. I've rigged it up so [can put on herbicide, prepare the seedbed, and plant — all in one trip over the field.”

See this page at FARM SHOW →
Best Buy

Robert Propson, Menasha, Wis · Vol. 1, No. 4 (1977), p. 11

Robert Propson, Menasha, Wis: Robert Propson, Menasha, Wis.: “It's the best digger I have had,” says Robert, proud owner of a Wil-Rich 30 ft. field cultivator. ‘It does a real good

See this page at FARM SHOW →
Best Buy

John Deere

Shirley Haney, Athens, Ala · Vol. 1, No. 4 (1977), p. 11

Shirley Haney, Athens, Ala: Shirley Haney, Athens, Ala.: He lists a “best buy” tillage tool (an TH 490 disk) and a tractor — a 4630 Deere with cab and air conditioning which, he says, is “great on hot, dusty days. The disk has 7% in. spacing front and rear, and floating wings that flex when disking around terraces. It's a real good finishing disk.”

See this page at FARM SHOW →
Best Buy

Terry Treadway, Hernando, Miss · Vol. 1, No. 4 (1977), p. 11

Terry Treadway, Hernando, Miss: Terry Treadway, Hernado, Miss.: His “best buy" nomination is a Deere V-90, 7-line Super chisel plow ripper. Here's why: “Due to the V-shape of the toolbar and the curved shanks, it lifts and turns the soil. Dirt does not have a chance to pinch the shanks as the shanks loosen the ground before the following shanks get to it. We had a dry summer and feel these plows more than paid for themselves last year. We do all of our plowing with “This machine makes the most uniform seedbed I’ve ever seen.” them and have used our regular chisel plows only once in the last two years." Terry also notes that he’s not at all happy with a membership he bought in a ‘Farmers buying service — Farmers and Ranchers Group Purchasing, Abiline, Kan. Did not get results as promised. This service was supposed to enable us to buy parts, equipment, chemicals, and so forth at a big discount. But, when we checked on some things, they were always higher than our local suppliers. Did not follow through on services promised, Waste of money.”

See this page at FARM SHOW →
Best Buy

Tom Foster, Colchester, Ill · Vol. 1, No. 4 (1977), p. 11

Tom Foster, Colchester, Ill: Tom Foster, Colchester, UL: “This machine makes the most uniform seedbed have ever seen,” says Tom of his new Vicon Power Harrow (16 ft.), “On clay hillsides or good black land, the seedbed is consistently the same. have it on a 70 hp tractor. It does a wonderful job. A larger tractor would mean more speed but I don't feel the seedbed would be any better.”

See this page at FARM SHOW →
Best Buy

Geo Carpenter, Lawrence, Mich · Vol. 1, No. 4 (1977), p. 11

Geo Carpenter, Lawrence, Mich: Geo Carpenter, Lawrence, Mich, He's been disappointed with Norelco heat bulbs which, he says, “burn out too fast, some in less than a day.” Chore Time flexible auger: “This auger was easy to install and hasn't given any problems. It has an automatic shutoff in the auger itself, and also in the feeder to prevent damage if the system is full. There's also a similar switch in the bulk bin that shuts the system off when the bin is empty so the system doesn’t run empty,” reports an Indiana farmer. Amiben herbecide: ‘I've used this product for the past six years and have been more than satisfied with its performance. Each year we receive many comments on our clean fields."’

See this page at FARM SHOW →
Best Buy

Robert Steyaert, Hillrose, Colo · Vol. 1, No. 4 (1977), p. 11

Robert Steyaert, Hillrose, Colo: Robert Steyaert, Hillrose, Colo. He's also well pleased with a Dakon pickup and windguard for the combine: ‘The pickup teeth don't break easily but, when they do, they're replaced easily and don't cost a fortune.” FARM SHOW 0 14

See this page at FARM SHOW →
Best Buy

International Harvester + 1 more

Wes Moeller, New Liberty, Iowa · Vol. 1, No. 4 (1977), p. 11

Wes Moeller, New Liberty, Iowa: Wes Moeller, New Liberty, lowa. IH 574 tractor: Millard Morgan, Jr., Bailey, N.C., is well pleased with its performance but wishes it had ‘‘a larger canopy, and sound deadening material underneath to prevent sound reverberations”, Allis Chalmers Gleaner combine: “It took 100 bu. per acre wheat with lots of straw with no trouble. Did a good job on pinto beans — didn't crack any and got lots of dirt out. About as good a job as I've seen, On corn, it got all the corn off the cob and didn't blow any over. Doesn't use much diesel fuel.” Robert Steyaert, Hillrose, Colo. He's also well pleased with a Dakon pickup and windguard for the combine: ‘The pickup teeth don't break easily but, when they do, they're replaced easily and don't cost a fortune.” FARM SHOW 0 14

See this page at FARM SHOW →