Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 26, No. 3 (2002)

Best & Worst Buys: FARM SHOW Vol. 26, No. 3 (2002)

59 reports from pages 14–17 · 52 Best Buys17 Worst Buys · See everything in this issue at FARM SHOW →

Worst Buy

Toro 268 Hydro lawn tractor

Joseph Berto, White City, Ore. · Vol. 26, No. 3 (2002), p. 14

“There’s no way I can adequately express the disgust I have for my 2001 Toro 268 Hydro lawn tractor. This $5,000 machine is the biggest piece of junk I’ve ever owned. The problems with it started just five hours after I bought it, and continued right to the end. The unit was unbelievably noisy (110 decibels) and did a terrible job mowing. But worst of all, parts on it continually broke. Belts broke, valves came out of adjustment, bearings and shafts exploded, the steering wore out, the starter froze - the list goes on and on. When I called the factory they were no help, saying it was the fault of whomever they buy their parts from. This noisy, poor-performing, lousy-cutting, uncomfortable mower should be at the bottom of anyone’s list. I’d rather push a mower than ever ride on a Toro product again.”

Best Buy

Deutz 40 tractor

Floyd Keller, Osage, Sask. · Vol. 26, No. 3 (2002), p. 14

“My 1967 Deutz 40 tractor is my best buy. I call it my little German girl. I’ve used this 40 hp tractor a lot over the years but it has never required any repairs. I use it to pull a small square baler and to plant, cultivate, and hill potatoes. I paid $4,300 for it, but I wouldn’t sell it for that price today.”

Best BuyWorst Buy

DeWalt 12-volt cordless drill equipped + 1 more

John Kustka, Green Bay, Wis. · Vol. 26, No. 3 (2002), p. 14

“My 1997 DeWalt 12-volt cordless drill equipped with an extended range battery is my best buy. I’ve used it to drill thousands of holes and to turn tens of thousands of screws, including big 3-in. deck screws. The drill is lightweight, yet has a lot of power. The batteries last a long time and recharge in only about 45 minutes. It’s a tough, durable, dependable shop tool.

“My 1996 Dodge Ram 2500 4-WD pickup is my worst buy. The transmission burned up at about 40,000 miles, and the dealer took it apart to determine the cause of failure. He found that the pump seals had failed, blocking lubrication to the transmission. The company wouldn’t stand behind its product. In addition, I was treated rudely by their customer service rep. Less than a year later I had to replace all the bearings in the pickup’s rear axle. Both the transmission and bearing failures were due to poor quality parts.”

Best Buy

Jay-Lor feed mixer + 1 more

Alan Lucas, Marion, Mich. · Vol. 26, No. 3 (2002), p. 14

A 1999 Jay-Lor feed mixer rates as Alan’s “best buy”. “I use it to blend a mixture of high moisture round bales and grain which I feed to my dairy cows and heifers. The unit cuts the bales into pieces and then mixes them with the grain. It doesn’t require a lot of power and is built to last. I feel it has improved our herd’s milk production and health.

“My 2001 Deere 457 Silage Special round baler is a best buy. We bale most of our hay as low moisture silage. I had been using a New Holland 644 but had problems with the pickup head plugging up. Also, the bales had soft cores and would flatten out which made them hard to handle. The Deere baler is the same size as the New Holland model but makes much heavier bales.”

Best Buy

Ram 2500 pickup equipped

Andy Anderson, Storden, Minn. · Vol. 26, No. 3 (2002), p. 14

“We like our 1994 Dodge Ram 2500 pickup equipped with a 5.9-liter, 360 cu. in. engine. We bought it used last year and use it mainly to pull trailers. It has performed even better than we expected. We replaced the front shocks, but otherwise it has required only routine maintenance. When we trade up we’ll more than likely buy a Dodge with a Cummins diesel engine and manual transmission.”

Best BuyWorst Buy

Claas 860 self-propelled chopper + 1 more

Bruce A. Putnam, Charlestown, N.H. · Vol. 26, No. 3 (2002), p. 14

“It’s a well built, high-capacity machine with a cab that offers great visibility,” says Bruce, pleased with his 1998 Claas 860 self-propelled chopper. “The company provides good support. We had a few problems with the chopper, but the company representative came out with the dealer and actually helped work on the machine. I appreciate how the company helped me get the machine up and running.”

On the “worst buy” side, he lists his Kuhn Alterna 400 mower and Kuhn 7200 hay rake. “We’ve had a lot of problems with the mower. We had to install new cutterbars because the machine’s poor flotation caused them to bend. The rake keeps breaking arms or bending them - a problem that we also had with the Kuhn 6000 model that we owned previously. Also, the machine’s slip clutch failed just after the one-year warranty expired. The dealer contacted the company about these problems, but the company rep told him he had already visited us once and wasn’t coming back. We’ll never buy equipment from Kuhn again.”

Best BuyWorst Buy

John Deere 325 lawn tractor handles + 1 more

Ashley Grimes, Faison, N.C. · Vol. 26, No. 3 (2002), p. 14

“My 2000 Deere 325 lawn tractor handles well and turns short, and the engine is evenly matched with the mower deck. It’s a comfortable machine to operate and is my best buy.

“My 1999 Chevrolet 1500 pickup is my worst buy. It has had a long list of problems. All the windows have had to be replaced; the engine leaked oil out of the valve covers; the transmission had to be replaced at only 60,000 miles; the driveshaft went bad; the driver’s seat broke when the pickup was still brand new; and the back seat supports had to be replaced. Also, the engine tends to stall whenever I start moving the pickup forward.”

Worst Buy

Smith Power Pro 75-amp plasma cutter + 1 more

Victor Doubek, Albany, Minn. · Vol. 26, No. 3 (2002), p. 14

Victor is disappointed with his 1999 Smith Power Pro 75-amp plasma cutter. “I was able to use it only for about 15 or 20 minutes before it quit working. I sent the unit back to the company four times for repairs and had to pay the postage. However, they never did get it to work right. The 2-year warranty was about to expire so I traded this piece of junk in for a Cutmaster 80 XL model sold by Thermal Dynamics. I’ve used it for about a year and it has been trouble-free.”

Best Buy

Ford F-250 4-WD extended cab

Nelson B. Davis, Bellville, Texas · Vol. 26, No. 3 (2002), p. 14

Nelson nominates his 2001 Ford F-250 4-WD, extended cab, shortbed pickup as his “best buy”. It’s equipped with an 8-cyl. gas engine and has a 4:10 ratio rear axle. “I’m pleased with how this pickup performs. It has a lot of power and a real comfortable ride.”

Best Buy

Allmand 25 hp compact backhoe

Alan Rushforth, Bryn Mawr, Penn. · Vol. 26, No. 3 (2002), p. 14

Alan likes his 1997 Allmand 25 hp compact backhoe. “I bought it used after I had a lot of problems with two other backhoe brands. It weighs only about 3,500 lbs. but is a real workhorse. It outperforms machines that weigh twice as much and also aren’t as well designed.”

Best Buy

F.B.I building

Steve Day, Gibson City, Ill. · Vol. 26, No. 3 (2002), p. 15

Steve’s impressed with his 1995 F.B.I. building. “It’s a great building and the company has provided excellent service on the few problems I’ve had. I’d recommend this company to anyone. The only negative is the building’s 20-ft. wide, 14-ft. high door Raynor tri-core door. The door’s rollers went bad so I called the company and they replaced them. When the same problem happened again the company replaced them once more. In addition, the door panels were holding water which leaked out. The door is supposed to come with a lifetime guarantee but it has problems.”

Best Buy

Ram 3/4-ton pickup equipped + 1 more

Coy R. Prokup, Porum, Okla. · Vol. 26, No. 3 (2002), p. 15

“Our 1993 Dodge 3/4-ton pickup equipped with a Cummins diesel engine is our best buy. It has more than 230,000 miles on it and is still going strong. The only repair it has required was to an odometer sensor. I wish all pickups were made like this one. The new ones that are made in Mexico have trouble with sealed U-joints, grease seals and clutch.

“I’ve worn Mason steel-toe shoes for several years and always considered them to be a great value. Not any more. The tongue was defective on one of the last two pairs I bought. The leather literally disintegrated. The company said the problem didn’t happen within 30 days of the purchase and therefore they weren’t responsible. Because of their greed they’ve lost a customer.”

Best Buy

Trojan plastic cattle water

Erik V. Helleskov, Stephentown, N.Y. · Vol. 26, No. 3 (2002), p. 15

Erik says Trojan plastic cattle water bowls are his “best buy”. “I was reluctant to buy anything made of plastic for use in my dairy barn, but most cast iron waterers cost twice as much as this one so I made the purchase. These water bowls have stood up extremely well, even though cows routinely scratch themselves on them.”

Best BuyWorst Buy

John Deere AMT 600 utility vehicle + 2 more

Bill Griffin, North Garden, Va. · Vol. 26, No. 3 (2002), p. 15

“I’m impressed with my Deere AMT 600 utility vehicle which I bought used. It’s one of the company’s earliest models and has a motorcycle front end. This machine has performed beyond my expectations in every way and has required no major repairs. I use it for hauling hay, wood, dirt, manure, rocks, and to tow my log splitter and a small trailer. It goes through mud and climbs hills with no problems. I like that it fits in the back of my pickup.

On the “worst buy” side, he lists Sears Craftsman tools. “They break easily. Here’s what happened to the tools I own. Open end wrenches spread open, rounding off the bolt head. The ends broke off screwdrivers. Sockets split. The end broke off my breaker bar. The pliers are too sloppy to get a good grip. I plan to buy Snap-On tools from now on.”

Best Buy

Montezuma CPL toolboxes + 2 more

John Stonestreet, Kismet, Kansas · Vol. 26, No. 3 (2002), p. 15

John’s impressed with Montezuma CPL toolboxes (Montezuma Welding & Mfg., Inc., 29502 12 Rd., Montezuma, Kansas 67867 ph 800 759-5157). “Although these toolboxes cost more than they did in the past, I still think they’re a great value. They save a lot of time because I don’t have to dig through everything looking for what I need. I can see at a glance if anything is missing. Everything is kept in place with the lid closed and locked.

“My 1988 Peterbilt 377 semi tractor has more than a million miles on it and is a best buy. It’s easy to see why Peterbilts hold their resale value better than most other semi tractor brands.

“I bought a Chevrolet 350 cu. in. engine to pump well water for irrigation and it’s my worst buy. The engine is supposed to have a 6-month warranty. It used too much oil so I took it back to the dealer. He claimed he couldn’t find anything wrong with it and said we just needed to work it harder. We put it on a bigger well and it used only half as much oil as before. However, for a new engine it still uses too much oil.”

Best Buy

Pohlan Wild

Hart den Hoed, Jr., Quapaw, Okla. · Vol. 26, No. 3 (2002), p. 15

“My 2000 Pohlan ‘Wild Thing’ 18-in. chain saw is my best buy. I haven’t had any problems with the chain saw itself. However, I bought it at Wal-Mart and if I need parts or service, forget it.”

Best Buy

Bush Hog blade

Jeff Shronce, Granite Falls, N.C. · Vol. 26, No. 3 (2002), p. 15

“It is just me, or are the big companies getting cheaper and harder to deal with? A month ago I picked up four brochures on 8-ft. scraper blades. After studying the specs, I chose a 70-08 Bush Hog blade because of its weight. I ordered one from a dealer I’ve done business with for the past 15 years. I picked it up two weeks later. When I got home and read the owner’s manual I found that it weighed only 570 lbs. instead of 710 lbs. as advertised in the company’s brochure. I called the company and they said the brochure had a typographical error and that they offer a heavier blade that weighs 30 lbs. more than the one I had. However, I would’ve had to pay $450 more to get it.

“I called my dealer and he said the fair thing to do was for me to pay half of that extra cost and he would see if the company would help out with the rest. The company’s reply was, ‘If you don’t like it, bring it back’. I’ve learned my lesson with Bush Hog. They’re expecting their good name to carry them through, but don’t expect them to be there to back up their product. I now understand why they have ‘Specifications subject to change without notice’ under each specification chart on each page. Now I’m ashamed to even own a Bush Hog product, including my ATH-600 grooming mower and 287 Bush Hog.”

Best Buy

Kent

Joe Wasson, Long Grove, Iowa · Vol. 26, No. 3 (2002), p. 15

Joe’s impressed with his 1999 Kent 28-ft. Disc-O-Vator. “If there’s a better spring tillage tool I have yet to find it. The hydraulically-adjustable disk gangs go right through standing corn stalks. This tillage tool works much better than the Deere 980 field cultivator we had been using. It’s a perfect match for our Deere 8100 MFWD tractor.”

Worst Buy

Lincoln 12-volt electric grease gun

David Ruark, Pomeroy, Wash. · Vol. 26, No. 3 (2002), p. 15

“I nominate my Lincoln 12-volt electric grease gun as my worst buy. I’ve always thought of Lincoln as a company that produces a high-quality product, but this grease gun is not just bad, it’s really bad. The gun’s original hose went bad and was replaced by the company. Then the trigger stuck and we had to pry it out in order to get the unit to shut off. We took the grease gun to a service center for repair, but they didn’t fix the problem at all. Now the product is old enough that the company won’t back it. I suggest others look long and hard before they buy one of these.”

Best Buy

Lincoln weld-pak 100

Larry Dennis, Yuma, Colo. · Vol. 26, No. 3 (2002), p. 15

A 1999 Lincoln Weld-Pak 100 rates as Larry’s “best buy”. “I have older equipment and use this welder to fix things up. I’ve already run about 20 lbs. of welding wire through it. It’ll weld everything from tin through 1/4-in. thick steel with no problems. I recently used this welder to build new grain sides on my 2-ton truck which is equipped with a 16-ft. box. I’d recommend this welder to anyone.”

Best Buy

Hobart Handler 15 Mig welder

Red Brend, Tupelo, Okla. · Vol. 26, No. 3 (2002), p. 15

“My 2001 Hobart Handler 15 Mig welder is my best buy. It’s easy to use, especially for someone without a lot of experience. It works great on light material. Overall it performs beautifully and comes with an excellent instruction booklet. I’ve never had a single problem with it. It runs equally well on electrical power or on my 6,000-watt generator.”

Best Buy

Grasshopper zero turn mower

R. Kevon Stockwell, Jeffersonville, Ohio · Vol. 26, No. 3 (2002), p. 15

“We’re happy with our 1995 Grasshopper zero turn mower. It’s equipped with a 20 hp Kohler gas engine and a 61-in. deck. It’s one of three mowers that we own. The other two are a Deere 110 and a Deere 318 equipped with power steering and a 50-in. deck. The Grasshopper has been virtually maintenance-free with the exception of two new sets of blades, which cost $39 per set. My 12-year-old son learned how to mow on the Deere 318, but ever since I taught him how to operate the Grasshopper he hates going back to the Deere .”

Best BuyWorst Buy

Harris propane + 1 more

John Philipation, Onanole, Manitoba · Vol. 26, No. 3 (2002), p. 15

“My Harris propane and natural gas cutting torch is economical to use, cuts clean, is easy to light and doesn’t blow out. It can be used to cut multiple layers of sheet metal. An acetylene torch would cut the top sheet and weld the remaining sheets together. It also does a super job brazing. I was a distributor for the product but have since retired.

“My worst buy is my Dodge Dakota pickup equipped with a V-6 Magnum engine. There’s nothing magnum about the engine -it’s just plain gutless and is hard on fuel. I realized soon after I bought it that this pickup was using too much fuel. The dealer tried to make improvements but couldn’t help. I wrote to the company and they told me I should take the pickup to my dealer for a tuneup. However, a brand new pickup shouldn’t need a tune-up. The problem is that the engine is grossly over-fueled. The dealer suggested that I drive the pickup more to break it in and maybe the fuel efficiency would improve. It didn’t. The warranty ran out and now I don’t know what I can do improve this pickup’s performance.”

Best Buy

Stihl 034 chain saw

Mark S. Webb, Sr., Cookeville, Tenn. · Vol. 26, No. 3 (2002), p. 16

“My Stihl 034 chain saw is my best buy. This is the third Stihl model I’ve owned. I work in the landscape business so I use these saws hard. But I’ve never had a reason to cuss any of them. They’re a perfect example of the saying, ‘You get what you pay for.’”

Best BuyWorst Buy

Ram 1500 pickup drives great + 1 more

Ron Marsh, Salem, Ore. · Vol. 26, No. 3 (2002), p. 16

“My 1997 Dodge 1500 pickup drives great, has a lot of power, and rides beautifully even though it’s a 4-WD model. The cab is quiet and has a great sound system.

“My 1999 Deere 5210 tractor equipped with a cab is my worst buy. The tractor runs just fine, but the quality of the cab is poor. Bolts fall out, doors don’t seal, and I had to replace the hinges and latches. The cab is so noisy I can’t enjoy the radio, and dust sifts into it. The air conditioner can’t keep the cab cool even when the outside temperature is only about 80 degrees. I wrote to the company about the cab and air conditioner problems, but no one replied. I guess once they got my purchase money - about $35,000 - they could care less about customer satisfaction. Too bad Deere doesn’t have more competition.”

Best Buy

DeWalt sliding compound miter

Michael W. Weaver, Shiloh, Ohio · Vol. 26, No. 3 (2002), p. 16

“My DeWalt sliding compound miter saw, 18-volt drill, and 18-volt saw are all best buys. The miter saw is easy to use, has a lot of power, and is well designed. I think 18-volt cordless equipment is the best invention to come along since electric saws and drills. The batteries are long lasting. It’s an economical drill to operate.”

Best Buy

Gregory Grappler + 1 more

Lyle Bentley, Oakland, Iowa · Vol. 26, No. 3 (2002), p. 16

Lyle says the Gregory Grappler - a heavy duty grapple fork designed for skid steer loaders - is his “best buy” (Gregory Welding, N. Hwy. 275, Sidney, Iowa 51652 ph 712 374-3366; fax 712 374-2822; Website: www.gregory grappler .com). “It’s designed to fit most skid steer loaders, but I had to make an adapter plate to use it on my JCB 520 4-WD boom loader . It’s tremendously overbuilt so it can be used for handling brush and large logs, round bales, removing fence posts and concrete. It can even be used to scarify or rip tough ground or rock roads.

“We do some custom demolition work and have used the grappler to remove concrete from old feedlots and also to demolish buildings. It also works great for tearing trees out of terraces and piling them up. One time I was able to pull concrete footings out of the ground that were 12 in. wide, 30 in. deep, and 10 ft. long with no problems. This grapple fork is built heavy and all major pivot points are greaseable for long life. It works so well I decided to become a dealer. It sells for a little less than $3,000.

“My JCB tractor is also a best buy. It can reach out a lot farther than a Bobcat, and it has a 4,500-lb. lift capacity compared to 2,000 lbs. for a Bobcat. The extendable boom lets me raise the grapple 16 ft. and extend it 9 ft. in front of me. One time I used it to tear down a 1 1/2-story house, crunch up the debris, and drop it into roll-off containers.”

Best Buy

Daro-eau reverse osmosis machine

Larry Moore, Loudon, N.H. · Vol. 26, No. 3 (2002), p. 16

“My Daro-eau reverse osmosis machine reduces the time it takes to boil maple sap into maple syrup by about 75 percent (Daro-eau, Inc., Ham-Noud, Quebec, Canada). “It filters out 75 percent of the water, saving both fuel and time. I also like the company’s Climaflex four-seasons tubing. It stays clean and is easy to use any season of the year.”

Best Buy

Visioneer Paperport Scanner

Dean Adams, Clinton, Ill. · Vol. 26, No. 3 (2002), p. 16

“My best buy is my Visioneer Paperport Scanner for my computer. I use it to archive interesting articles from FARM SHOW. In the past, when an idea hit me as something I might use, I would cut it out and put it somewhere I wouldn’t lose it. Yeah, right! Then I tried setting up a 3-ring binder and gluing the stories to typing paper. But who has time to do all that cutting and gluing? The bottom line is that when I wanted to find something, I usually couldn’t.

“Then I bought a Vissioneer scanner for $40 at Sam’s Club. It’s simple. You just take it out of the box, hook it to the computer, install the software, and start scanning. Now I scan in any articles of interest, convert them to a Word file and store them on the disk. I also print them out to put in a 3-ring binder that I call my Idea Book. When I need to find something, I can search by name in the computer.

“The image quality is very good. Sometimes the photos come out better than in the magazine.”

Best Buy

New Holland 1475 + 1 more

Ron Wieseler, Orient, S. Dak. · Vol. 26, No. 3 (2002), p. 16

A New Holland 1475 18-ft. Haybine rates as Ron’s “best buy”. “It floats right over rocks and cuts both tall and short hay without needing any adjustments.

“My Haybuster 2620 bale processor is a best buy. It reduces waste and also makes the hay more palatable for our cows. As a result, the animals can now get by on about one third less hay.”

Best BuyWorst Buy

John Deere 926 disc-type mower/conditioner + 1 more

Kevin Glenister, Dryden, Ontario · Vol. 26, No. 3 (2002), p. 16

Kevin nominates his Deere 926 disc-type mower/conditioner as “best buy”. “My wife and I used it last year to cut 400 acres of hay and never had to get off the tractor other than to grease it. It was also cheaper than the other brands we checked out, which was a surprise.

“My Hesston 555T round baler is my worst buy. We’ve only used it to make about 1,500 bales but have already had to replace two belts at a cost of $400 per belt. One belt got wrecked when a $4 spring broke. We’ve had numerous other problems with it. We had been using a Vermeer 605A which didn’t have nearly as many problems. We plan to trade the Hesston in this year for a New Holland or Deere model. We would’ve been better off buying one of those brands to begin with, but we tried to save a buck.”

Best Buy

Grasshopper 721 riding mower

Ernest Leo Fuhr, Fort St. John, B.C. · Vol. 26, No. 3 (2002), p. 16

“Our 2000 Grasshopper 721 riding mower is equipped with a 61-in. deck and is my best buy. I use it to mow my 3-acre lawn. We live at mile 42 of the Alaska Highway and have a large bee keeping operation. This mower works so well we now use it to cut grass for most of the bee keeping operations within a 30-mile area. It’ll cut brush up to 1 in. in diameter and we can use it close to fence posts and under the bear fences that protect our bee hives. We haven’t had any problems at all with it. The mower is so versatile and easy to operate that even a child could run it. Several attachments for it are available, including a snowblower, sweeper, dozer blade, and dethatcher.”

Worst Buy

Harvestore silo

David Swanson, Mount Morris, N.Y. · Vol. 26, No. 3 (2002), p. 16

“Our 25 by 65-ft. Harvestore silo is our worst buy ever. It’s hard to get feed in and impossible to get it out. The Goliath unloader that we used in it was also terrible. It broke and we had to winch it out of the silo with a Cat D8, which broke it to pieces. The bottom rings of the silo burned out. It cost a lot of money to fix.”

Best Buy

Ford F-150 1/2-ton pickup

Jason Meyer, Avon, Ill. · Vol. 26, No. 3 (2002), p. 16

“Our 1989 Ford F-150 1/2-ton pickup is our best buy. Over the years we’ve put it through more than it was ever built for. It’s powered by a 300 cc straight six engine and has more than 250,000 miles on it. Those miles include a lot of hard farm work. This pickup has been overloaded and driven through rough fields at high speeds, yet it still rides great on the road. Despite all the abuse it has received, it looks pretty good.”

Best Buy

[email protected] + 1 more

Ray Alexander, Fredericton Junction, New Brunswick ph 506 368-2444; E-mail · Vol. 26, No. 3 (2002), p. 16

[email protected]: “My Massey Ferguson 3070 is a good tractor. The only problem is that in damp weather the hydraulic oil pressure light comes on. When this happens, some of the tractor’s functions quit working, especially the transmission range switch. As soon as the weather clears, the problem goes away until the weather turns damp again. I’d like to hear from anyone who knows how to solve this problem.”

Best Buy

GM Sierra 1500 4-door pickup + 1 more

Ross Giles, Airdrie, Alberta · Vol. 26, No. 3 (2002), p. 16

“My best buy is my 2000 GM Sierra 1500 4-door pickup. It’s a smart looking, good riding, and good driving pickup with a quiet cab. It’s also easy on fuel and has comfortable seats.

“Our Troyer V-top trap is also a best buy. We bought it last May and have already trapped 150 sparrows with it. We’re very happy with it.”

Best Buy

Kubota B2710 compact tractor

Dan Schut, Cadillac, Mich. · Vol. 26, No. 3 (2002), p. 16

A 1999 Kubota B2710 compact tractor rates as Dan’s “best buy”. “This tractor is built to last a lifetime. The quality of workmanship is excellent, and everything about it is rock solid. I researched all the different tractor brands and then bought what I perceived to be the best on the market. After 400 hours of use, I feel it was a great purchase.”

Best BuyWorst Buy

Zetor 6293 tractor + 1 more

Donald Brenton, Stewiacko, Col Co, Nova Scotia · Vol. 26, No. 3 (2002), p. 17

“So far I’ve had only minor problems with my 1998 Zetor 6293 tractor. It has a good cab and excellent traction.”

He says his International 685 tractor equipped with a front-end loader works well but has nevertheless had some problems. “The hood design, with a loader on, makes it hard to clean the radiator and also the oil cooler. To clean the radiator I have to first remove the hood. It shouldn’t take 1 1/2 hours to clean a radiator, but it does. I’ve cleaned the radiator on this tractor several times, and every time I had to remove the hood.”

Best Buy

Ram 1-ton flatbed pickup equipped

Ted Harris, Inyokern, Calif. · Vol. 26, No. 3 (2002), p. 17

“My 1990 Dodge 1-ton flatbed pickup equipped with a 6-cyl. Cummins diesel engine is my best buy. It’s been virtually trouble-free. Sometimes I load 140 100-lb. bales on it and pull a 16-ft. trailer at the same time, returning 155 miles back home empty. With a load I’m pulling more than 24,000 lbs., and empty 10,100 lbs., yet I still average 13.9 to 14.3 miles per gallon.”

Worst Buy

John Deere 566 round baler

Larry Betts, Little Falls, Minn. · Vol. 26, No. 3 (2002), p. 17

Larry says his 1999 Deere 566 round baler is his “worst buy”. “Upon delivery the baler was damaged and was missing a scraper kit, and there were some parts on back order. As of last November, the parts still hadn’t come in. The wrapping mechanism has never worked properly, either. There has been little to no effort from my dealer to correct these problems. It’s hard for me to continue to support Deere or my dealer when the quality of customer service that I received was so poor.”

Worst Buy

B-Alert strobe light

Glen Stuivenga, Sheridan, Ore. · Vol. 26, No. 3 (2002), p. 17

Glen is disappointed with the B-Alert strobe light he bought for chasing away pest animals. “The product is made in China. It’s supposed to chase away pests such as raccoons and even deer from gardens. However, it didn’t work and was a waste of money as far as I’m concerned.”

Best BuyWorst Buy

Besler pickup-mounted round bale + 1 more

Russ Gilbertson, Nashua, Montana · Vol. 26, No. 3 (2002), p. 17

“My Besler pickup-mounted round bale handler is my best buy (Besler Industries, P.O. Box B, Cambridge, Neb. 69022 ph 308 697-4866). It’s well built and virtually indestructible. I can’t believe how much work this machine saves on cold mornings. I like that I don’t have to start a tractor.

“The Campbell Hausfeld gas engine-driven pressure washer I bought a couple years ago was a worst buy. It quit working after I had used it for only a couple hours. It’s powered by a Briggs & Stratton gas engine, which works fine. However, the washer part leaves a lot to be desired. I kept it for only two months. It comes with a one-year warranty which is also a joke. I couldn’t get anything accomplished with this machine and wouldn’t recommend it to anyone.”

Best Buy

Farm King 3-pt mounted pto-driven

Willy Tenold, Reva, S. Dak. · Vol. 26, No. 3 (2002), p. 17

Willy’s impressed with his 2000 Farm King 60-in. 3-pt. mounted, pto-driven rototiller (Farm King, 301 Mountain St. S., Morden, Manitoba, Canada R6M 1X7 ph 204 822-4467). “This rototiller works well even in weeds. Field bindweed can be extracted from the tines by lifting the machine and putting it in gear for just a few seconds. It’s a real treat to be able to pulversize the ground without feeling pulverized yourself. We even used this machine last spring to till some ground that had never been worked before.”

Best Buy

Versatile 9030 bi-directional tractor

Lance Roper, American Falls, Idaho · Vol. 26, No. 3 (2002), p. 17

“My Versatile 9030 Bi-Directional tractor was my best buy ever. It was truly a versatile tractor, as I used it with a loader, grapple fork, forklift teeth, and a swather header. I owned this tractor for three years and used it in my custom haying business and also for other jobs. My 9030 was big enough to keep up with self-propelled swathers, yet narrow enough that we could drive it up onto a semi truck to haul it go to another field. Between crops we dropped the header and used the grapple fork to load bales. We also used the tractor to move irrigation pipe, pallets, and anything else that the forklift teeth could get under. I sold my haying business but I still miss that tractor. I used it all year long including during the winter when it was equipped with a snowblower. It had a hydrostatic transmission so it worked great for that job.”

Worst Buy

I’m the disappointed owner of a brand new Deere 2200 5-section, 45 1/2

Mike Bellar, Howard, Kansas · Vol. 26, No. 3 (2002), p. 17

“I’m the disappointed owner of a brand new Deere 2200 5-section, 45 1/2-ft. field cultivator delivered March 15, 2002. The problem is that when I’m in the field and raise the cultivator to turn, the outside wing I’m turning into drops significantly. The rest of the machine can be 12 inches above ground, yet this wing is dragging in the ground.

“After I complained for six weeks, the company finally admitted there’s a problem. However, they want me to pay $1,300 to fix it. I think it’s a design flaw and that it’s their responsibility to make it work.

“In the past, Deere has always stepped up to the plate and corrected any problems I’ve had. That’s why I almost always buy Deere. However, after this episode I’ll think twice before I buy anything green again.”