Bale Skiis bale liners
“I installed Bale Skiis bale liners on my New Holland 68 small square baler (www.LDAGmachinery.com; ph 866 889-3846). These balers were made from 1952 to 1958, but equipped with Bale Skiis they now work like new”
68 reports from pages 12–15 · 62 Best Buys13 Worst Buys · See everything in this issue at FARM SHOW →
“I installed Bale Skiis bale liners on my New Holland 68 small square baler (www.LDAGmachinery.com; ph 866 889-3846). These balers were made from 1952 to 1958, but equipped with Bale Skiis they now work like new”
“We burn a lot of wood in our fireplace during the winter so the Firemizer caught my eye when I first saw it advertised (www.firemizer.com; ph 800-848-0477). Invented in Europe, it’s simply a thin layer of specially-manufactured steel mesh that feels a lot like flattened-out steel wool. It comes in various sizes and lays across the top of your fire grate. The idea is to slow the flow of air up through burning wood, which in turn slows the rate of burning by up to 30 percent. I’ve been using mine for a couple months now and it definitely reduces the amount of wood burned, but I‘m not sure how much. However, the thing I really like about it is that it keeps coals from dropping down under the grate so the fire doesn’t burn down as fast and the pile of coals on the mesh provides a nice glow as you let the fire burn down. When you go to make the next fire, just shake the ashes off the mesh.
“Firemizer says the metal mesh will last the equivalent of continuous burning of wood 12 hrs. a day for 6 weeks. I showed the idea to my brother-in-law, who doesn’t like opening his wallet much (it sells for $28 on Amazon. com). Instead of buying one, he cut out a rectangle of wire mesh and fitted that to his fire grate. It might not block as much air flow as my Firemizer, but it cradles the ashes and does seem to slow the rate of burn.”
Photo: FARM SHOW“Engine-powered air pressure may not be the number one accessory on our farm, but it’s darn close,” says FARM SHOW contributing editor Lorn Manthey.
Read the whole story →Read more at FARM SHOW →He’s happy with Sealoflex waterproofing system (www.sealoflex.com; 877-423-7663). “I used Sealoflex to roof an addition to my tractor shed. It’s like laying fiberglass. A special fabric is imbeded into it, which has the pink color of bubblegum. You use a brush or roller. When it dries, there is a finish coat that comes in a dozen colors. It’s UV protective. And it cleans up with water, like latex paint. Two years later the roof is still sealed tight and should last many more years. You can use it on wood, brick, basements, and more.”
“My wife and I bought a used Toyota that only had one key. We found out later that to get another smart key costs $340 from the dealer. So be sure you get 2 keys when you buy a used car.”
“My worst buy was a 1050 Cub Cadet lawn mower bought in 2013 at Home Depot. I went through 4 belts the first year. The factory replaced one. It’s hard to steer and hard riding. There’s also a lot of rust and loss of paint on top of the deck.
“My best buy is a DR wheeled bushwhacker that I bought in 2011. It starts every year with a couple of pulls and I’ve had no problems.”
“In your last issue someone said his “Best Mouse Trap Ever” didn’t catch a single mouse. I bought one of these traps after reading about it in FARM SHOW and thought I was alone in having that dreaded experience. I can’t catch anything with it. To make it worse, the shipping to Canada cost more than the trap.”
His “best buy” is the “rocket stove” he built based on a design he saw on YouTube. “It dropped my wood consumption from 5 cords a winter to just 2 cords and only cost $150 to build and install. The design of these stoves is just amazing. Go to www.youtube.com and search for ‘rocket mass heater build KCS ranch’ and you’ll find a video about the one I built.”
Walter says the 2006 Deere Buck 4-wheeler he bought 8 years ago is his “best buy”. Deere introduced the Buck in 2005 and it was produced by Bombardier in a partnership between the 2 companies. It was not continued for the 2007 model year.
“It was a demo model with about 60 miles of hard use on it. I tried it out and loved it. It has a ‘slide-through’ seat that makes it easy to get on and off. That’s important to me as I’m only 5 ft. 4 in. tall. I haven’t had any trouble since I bought it. I use this machine to plow snow, haul firewood, and to go fishing.”
“It’s the best $2,500 I ever spent,” says Larry about the 1965 Oliver 1850 diesel tractor he bought used. “I spotted this tractor sitting in a pasture off a main highway and stopped to look at it. Both rear tires were ragged. I talked to the owner, and we came to an agreeable price on the condition I could get the tractor to start. It belonged to a nice lady who had lost her husband, but it had been idle for several years.
“After I rebuilt the injector pump and replaced the battery, it started right up. After replacing the rear tires with a set of good used ones and changing the oil, we put the tractor to work and we’re still using it. It runs great, pulls hard, and sounds good. I’m proud of this tractor - it’s a highly valued addition to our farm.”
Lee has about 300,000 miles on his 1989 Dodge Dakota pickup but says it still runs great. “I’ve used this pickup to haul some really big loads, but it just keeps on going. The engine and transmission have never been touched.”
“In 1982 I bought a used 1965 Massey Ferguson 135 diesel tractor. Other than a small engine oil leak, there have been no problems. It’s a great tractor.”
“I like my Deere X370 riding mower equipped with a 60-in. deck. However, I’ve had problems with my Deere X745 equipped with a 62-in. deck. Often it won’t start due to a problem with the fuel solenoid on the carburetor.”
“Our 1993 Kawasaki 220 Bayou 4-wheeler has required only minor repairs. We use it to check on cattle and to spray weeds, and our grandchildren like riding on it. I wish I knew how many miles were on it.”
“It never lets us down and has required very few repairs,” says Ken about his 1998 New Holland 1720 4-WD loader tractor. “It rides on turf tires, which we really like because they don’t tear up our yard. This tractor is fuel efficient and has a lot of power. We use it with a sicklebar mower, manure spreader, rear-mounted blade, and springtooth drag. It’s very maneuverable in tight places, easy to get on and off, and comfortable to operate. Well designed.
“We love our 2002 Chevrolet Silverado 2500HD 4-WD extended cab, shortbed pickup equipped with a 6.0-liter engine and manual transmission. It has a B&W turnover gooseneck hitch that drops out of the way, allowing full use of the pickup bed. It has plenty of power to pull our big horse trailer. This pickup rides and drives great. It’s an easy truck to own.”
“I use my 2014 Stihl FS70R string trimmer a lot. It cuts the toughest weeds and never fails to start, even after being stored all winter. Excellent quality.”
A 2013 Cub Cadet riding mower rates as Bruce’s “worst buy”. “Something seemed to either break or fall off this mower about every 10 hrs., and none of the dealers in our area were able to keep it running. I put only about 90 hrs. on it last year but spent $998.73 on parts. At 430 hrs. I finally sold it and bought a Deere.”
Ron owns a 2009 Chevrolet Colorado 4-WD standard cab truck with a 5-cyl. engine. “This is a no-frills pickup with just cruise control and radio. It has about 55,000 miles on it and has adequate power both on and off-road. We’ll replace this truck if anyone ever comes out with a standard cab smaller truck. Otherwise I’ll keep it.”
“I used my DeWalt 14-volt drill-driver to drive screws while building 4 different pole sheds. The only problem is whenever I need it I have to go get it from my wife, who uses it all the time. She finally bought her own DeWalt.”
“About 3 years ago I used JB Water Weld to seal a leaky gas tank on my Husqvarna chainsaw, and it solved the problem. A crack had developed in the bottom of the tank. I just sanded the cracked area down and then applied a single layer of the sealer. That fixed the leak.”
David’s satisfied with his 2013 Harbor Freight 2-ton engine hoist and 2015 Harbor Freight 20-ton shop press. “I’m a 90-year-old do-it-yourselfer. In 2013 I built a 6 by 16-ft. fifth wheel utility trailer from the ground up, and in 2015 a friend gave me an Allis Chalmers B tractor which I restored to like-new condition. I used the engine hoist and shop press during the restoration project, and both performed perfectly.”
Kenneth’s disappointed with the HLA Attachments quick-tach disconnect plate he bought for his Kubota 410 loader tractor. “I paid $2,300 for this plate, but it was built sloppy. I tried to free it up to get it to work, but accidentally broke a weld that was poorly made. There were no grease fittings and the holes wouldn’t fit OEM pins. I spent 6 hrs. trying to make it work.
“I bought the plate from Cummings and Bricker, Inc., and they were no help at all. Finally the dealer sent the plate back for credit.”
“I like my 2008 Ford F-150 4-WD crew cab pickup equipped with a 5.4-liter engine. It has about 88,000 miles on it and is on its second set of tires. It’s the best Ford pickup I’ve ever owned.”
“I own a 1992 Troy-Bilt high wheel, walk-behind 22-in. mower equipped with a 5 hp Briggs & Stratton engine. All I have to do is change the oil and spark plug and keep the blade sharp. I replaced the blade once because of wear. The engine doesn’t use any oil. It’s an amazing piece of equipment.”
Paul likes the Champion gas-powered water pump he bought at Tractor Supply Company. “It starts with one pull every time and runs great.”
David’s disappointed with his 2009 Deere LA105 riding mower equipped with a 19 1/2 hp engine. “I bought this mower at Home Depot. Deere wouldn’t help so I had to spend $1,600 on repairs. That’s a major manufacturing defect that the company should be responsible for.”
“I like my 2011 Sears Craftsman 18-in. electric chainsaw equipped with a 4 hp. motor. I’ve used it a lot but it continues to work great. It has had only some minor electrical problems with the electrical cord’s plug end. I can use this saw with a portable generator. I like not having any fuel problems like with gas saws.”
Warren’s the satisfied owner of a 2014 Branson 4-WD loader tractor equipped with a 55 hp. engine. It has about 2,200 hrs. on it. “This tractor is one of the heaviest in its class and has plenty of power to handle the loader, as well as a rear-mounted 6-ft. rototiller and 8-ft. blade. I like the transmission, which has 12 forward speeds and 3 reverse, and the 2-speed pto which activates electronically.”
On the negative side, he lists his 2004 Yamaha 450R motorcycle. “It’s hard to start even though we’ve had it tuned up by a good mechanic and also our Yamaha dealer.”
“We don’t have a lot of miles on our 2015 Jeep Renegade, but we love it. It gets 32 mpg and is nimble and easy to park. It only has a small 4-cyl. engine, but it’s very snappy.”
“In 2013 I bought a 6-tool cordless Milwaukee M18 tool kit, and every tool still works like new except for the hammer drill. The motor on it burned out, but the company replaced the motor as well as the chuck. The problem with the chuck was our fault.”
A 2016 Sure-Trac 30-ft. gooseneck Lo-Pro dual wheel tandem trailer rates as James’s “best buy” (www.sure-trac.com; ph 260 758-9838). “I use this trailer to haul farm tractors, towing it behind a Ford F-550 truck. It’s the best towing trailer I’ve ever used. It’s built with flat iron cross braces instead of a torsion tube, which makes it 4 times stronger. Also, it tows equally well without swaying whether it’s loaded or empty. The low profile design with full width ramps makes loading and unloading a much safer job. And because of the trailer’s low profile design, the ramps aren’t nearly as steep.
“Sure-Trac trailers are built with an all I-beam frame and gooseneck using U.S.-made steel, and they’re built in the U.S. Also, the paint coating is very durable.”
“I’ve had good luck with Honda engines. The one on my 1998 Honda 50 Trail mini bike still starts with just one crank, and my old Honda 3-wheeler and Honda snowblower always start with just one pull.
“My Cub Cadet LTX 1040 riding mower is the same color as a lemon, which is quite fitting. It eats up deck belts and doesn’t go uphill very well. I paid $1,400 for it. One cheap feature is that it uses a cable to engage the mower deck. I’ve seen on YouTube where other people have tried to fix their problems with this mower.”
“My 1969 Deere 4020 diesel tractor has about 9,300 hrs. on it but has required only normal maintenance and repairs. It has never been overhauled. When I bought it my dad thought I didn’t need to buy such a big tractor. However, later on he told me I had made a good choice and he borrowed it frequently.”
“My 2003 Dodge Ram 3500 4-WD 4-door pickup equipped with a 5.9-liter Cummins diesel engine has spent most of its life hauling or towing loads and has traveled through at least 14 states, but it’s still going strong with about 231,000 miles. I’ve used it to haul everything from tractors and farm machinery to furniture, in a whole range of trailer sizes. I’ve also driven it through snowdrifts up to the mirrors and through deep mud, but it always keeps going.”
“During the 50 years I’ve worked in construction trades I’ve probably used every brand of cordless drill there is, and I think the Porter-Cable 20-volt lithium ion, 1/2-in. cordless drill is the best by far. The batteries charge quickly and last a long time, and the drill fits nicely in my hand. The 1/2-in. chuck on it is a good feature.”
“No problems with my 2009 New Holland T1510 30 hp tractor equipped with an 8-ft. Woods backhoe and 6-ft. snowblower. I only wish it had a step that would make it easier to get into the cab. I added backup lights and a soft cab enclosure. A slit I cut in back of it lets me reach out to hand crank my snowblower chute.
“I like my 2000 DR walk-behind 6 hp. Powerwagon that’s equipped with electric start and snow chains. It doesn’t really need electric start. I leave the chains on all year long.
“The fuel tank on my 2002 DR 18 hp 4-in. wood chipper had to be replaced under factory recall. I removed the shield on the machine’s rear chute in order to end its tendency to clog. Now it shoots chips about 20 ft. out into the woods.
“The Troy-Bilt 570 27-ton log splitter I bought used is a best buy. I read a review in a magazine years ago saying this splitter should only be counted on to make 3 or 4 cords a year, but I’ve used it to split about 8 to 10 cords each year. I installed some flashing to deflect exhaust away from the operator whenever I use the splitter in the horizontal position.
“I like the 2014 6-ft. box scraper I bought from Everything Attachments (www.everythingattachments.com; ph 828 464-1200). The company was very helpful with selecting the right scraper to fit my tractor for what I wanted to do. This scraper cost less and was built with better quality than anything else I could find.
“I’m impressed with K&W head gasket and block repair sealer (sold at WalMart and amazon.com). My Ford 1700 tractor had been overheating and progressively losing power, and I had to use the glow plug to start it even in summer. This tractor is known for developing cracked cylinder heads, so when I asked a New Holland service technician what to do, he recommended trying the K&W block sealer. It worked, and now the tractor starts right up without the glow plug and it no longer overheats. Plan on 2 days to let this product work correctly, and you won’t be disappointed.
“I bought a replacement radiator from All States Ag Parts (www.TractorPartsASAP.com; ph 877 530-4430) and it fit perfectly - everything lined up correctly and it took me just 30 min. to replace. This company offers great service and great prices.
“My Dare Eclipse DS 200 solar fence charger worked good at first, but after a year the solar panel will no longer keep the battery charged. A replacement battery only lasted a week before it lost its charge. I may have to try adding an aftermarket solar panel since I don’t have close access to a power source.”
“It’s a great all-around machine No problems,” says Glen about his 2000 Deere 360 diesel-powered skid loader. “I use it to run a portable auger, to trench foundations, set trusses, unload material with forks, grade fill for building sites and to do finish grading with a blade. I had heavy-duty Loegering tracks put on it right after I bought it, and tire wear with the tracks has been minimal. I’ve only had to replace the tires once.
“I’ve owned New Holland, Bobcat and International equipment previously and had problems with all of them. When I buy new construction equipment now it’s always Deere.”
He’s had problems with his 2005 Kioti 35 hp. tractor. “It has gone through 5 different hydraulic pumps in less than 2 years. The last pump is still working, but I think it needs more power. Anyone know where I can get a more reliable hydraulic pump for this tractor for less than $800?”
“It’s a real lemon,” says Dana about his 2013 Dodge Ram 1500 pickup. “Within the first 22,000 miles it was at the dealer 7 different times for electrical problems with the instrument panel and radio. They installed 5 different radios, but nothing helped. Then the pickup started locking me out, and twice it wouldn’t let me start it. The dealer says this was the first year this pickup came with a fully computerized dash. Why don’t manufacturers work out the bugs before putting stuff on the market?”
James likes the Limbinator bucket-mounted hydraulic-powered saw he bought from Northern Tool for about $1,800 (www.northerntool.com; ph 800 221-0516). “It consists of a 20-in. bar that mounts on an 8-ft. steel boom that attaches to a front-end loader’s bucket, allowing the saw to reach out 20 ft. or so to trim trees. The amount of trimming I was able to do in one afternoon with this saw was amazing. It saved months of hand trimming.”
“I hate seeing rusted-out vehicles. So to keep rust forming from the inside out on my vehicles I fill a Sure Shot sprayer (www.sureshotsprayer.com; ph 262 437-0330) with PB Blaster general purpose oil or Blaster Corrosion Stop (www.blastercorp.com/corrosion-stop). I put vehicles up on ramps and coat the underside, seams, and underbody compartments. I make sure to avoid coating on all the components that heat up under use such as exhaust manifolds, exhaust pipes, and brake rotors.
“On pickups I spray the inside of the rear wheel wells and cab corners, because those 2 spots are always the first to rust from the inside out. I remove all the body plugs and spray the inner area with oil, and then replace the plugs. I also carefully spray the inside of vehicle doors from the bottom drain holes, being careful not to spray electric door motors and door locks.
“Blaster Corrosion Stop will protect the vehicle for 2 to 3 years while the multipurpose oil will protect for a year. I’ve had excellent results for many years with all PB Blaster products.”
“After reading about Ecobust in FARM SHOW, I ordered it from Home Depot. It’s a powder which, when mixed with water and poured into pre-drilled holes, expands to break up the concrete into clumps. The company says it’s a quiet, safe way to remove concrete. There’s no noise, vibration or dust. Just drill several 1 1/2-in. dia. holes about 85 percent through the slab and fill them with the Ecobust-water mixture. The non-toxic powder can be washed away and is biodegradable. It comes in 11 and 44-lb. buckets. Works great.
“I broke my masonry bit so I ordered two 1 by 12-in. bits from Buy Drill Bits by Associated Industrial Distributors. They were at my door within 24 hrs. (www.buydrillbits.com; ph 800 351-4230). After drilling more than 100 holes, the first bit I used still looks good, so I haven’t even used the second one.
“I find that Work & Sport shoes made in Wisconsin and sold by Blain’s Farm and Fleet are more comfortable than any popular brand shoes I’ve ever worn (www.farmandfleet.com; 800 210-2370).”
“In 1978 I bought a used 1954 Allis Chalmers WD45 tractor with a stuck engine. I replaced the valves and rings and added a live belt-driven hydraulic pump, power steering, and New Idea front-end loader. I still use this tractor almost every day. I replaced the rear tires with 18.4 by 26 tires with fluid, so it really pulls good.
“We also own a 1976 Ford 9600 tractor with no cab and a 1978 Allis Chalmers 7020 with cab that we bought about 18 years ago. Very few problems with either tractor. These tractors don’t use oil and start right up every time.
“Over the years I worked for several different companies where I drove newer model pickups including Ford, Chevrolet and Dodge. However, they all seemed to have minor but irritating problems so now I always buy used models, primarily Fords. I drove a 1978 Ford F-150 4-WD until it had about 396,800 miles, and now I’m driving a 1999 4-WD Ford that has more than 197,000 miles on it but still runs good.”
“We bought a new Deere 345 lawn tractor in the 1990’s, and in no time the hood started cracking. You see hoodless Deere lawn tractors just about anywhere you go and that’s why. Otherwise, this is still a good tractor.”
“The only downtime we’ve ever had with our 2004 New Holland 24 hp. compact loader tractor was due to a bad ground cable. We use this tractor to mow grass in a small orchard and to remove snow. It sometimes seems like it can do more work than 4 full-size tractors.”
“My Dolmar 510 chainsaw starts good, cuts fast, and is easy on fuel. My Ford 6600 tractor has plenty of power and is comfortable and easy to drive. It’s also fuel efficient.”
On the minus side, he lists his Kuhn Knight 1219 rear discharge box manure spreader. “The first year the poly floor cracked and the spreading paddles fell off. The following year, the small drive belt burned up 3 different times. I replaced it with a sprocket and chain which solved the problem. The third year we were scraping manure off the spreader when big patches of rust fell off the machine, leaving big holes. The company said this was just a cheap spreader anyway, but to me $9,000 isn’t cheap.”
“After reading an article about the American Eagle pond aeration windmill in FARM SHOW about 10 years ago, I decided to buy one (www.pondaeration.com; ph 440 236-3278). This wind-powered, pond aerating windmill generates pressurized air to keep the water in our pond fresh and clear. I had been using an electric pump and fountain, but it was noisy and cost about $100 per month in electricity to operate. This one costs nothing to operate, and all we do is grease it once a year. Works great.”
“My son bought a Polaris Ranger 6-wheeler utility vehicle with a supposedly bad engine at an auction. It had a stripped-out head bolt, and the ignition wire was grounded to the frame. Now it’s the handiest machine on our farm. It starts right up and will go anywhere.”
George says his 1971 International Harvester 1110 pickup “is easy to fix, built rugged, and adaptable to any project. Of course, they don’t make them anymore.”
He has owned 4 Deere tractors over the last 40 years. “My 110 lawn tractor worked well. My 112 lawn tractor broke 7 different axles. Neither the dealer nor the company would pay for the repairs. My third tractor, a 20 hp. 650, needed a new electric front pto clutch but a replacement wasn’t available. The fourth, a 670, came with the poorest front-end loader design I’ve ever seen.”
James is the satisfied owner of a 2015 Ford F-150 2-WD pickup equipped with a 2.7-liter Ecoboost engine. “I use it to tow equipment to jobs and to haul loads of firewood back to my home. No problems. It has plenty of power and is fuel efficient, averaging 20.9 mpg.”
Marvin’s “best buy” is Evapo-Rust, a water-based product that removes rust in minutes without scrubbing (www.evapo-rust.com). It’s sold at Walmart, Amazon and Harbor Freight. “This stuff works like magic to restore rusted tools. I’ve used it to restore vise grips that had been laying outside for 2 years and were frozen up. It really works.”
He likes his Firehose work pants from Duluth Trading Co. (www.duluthtradingcompany.com; ph 855 985-3986). “These pants wear like iron and the size and fit are excellent. Great customer service, too.”
“It’s the best vehicle of any kind that I’ve ever owned,” says Jimmy about his 2001 Ford Ranger. “It has about 286,000 miles on it with very few problems and still looks and drives great.”
“My 2012 Husqvarna 455 Rancher chainsaw never fails to start. I just press the primer bulb a few times, pull the choke, and it’ll start within 3 pulls every time. The 20-in. bar really chews up logs.”
“It has almost 15,000 miles on it while requiring only routine maintenance,” says Gary about his 2011 Polaris 800 Ranger. “My wife, sons and grandkids drive this utility vehicle every day. It runs quiet and rides smooth, and it starts good in cold weather.”
He’s impressed with the Demotec Easy Block hoof kit he uses on his cows (www.valleyvet.com; ph 800 419-9524). The kit includes a quick-setting resin that’s used to bond a plastic slip-on boot to the healthy claw, taking stress off the afflicted claw.
“For about $9 a hoof, they transform hopelessly lame cows into movers and shakers.”
He’s disappointed with his Baumalight 3P40 3-pt. mounted, pto stump grinder. “The steel brackets that hold the grinder teeth started to crack after only a few uses, and the entire grinder wheel fell apart within a few months. We had to replace the wheel 3 times in less than a year. Fortunately, the wheel was covered by warranty. However, we had to do the replacement work ourselves.”
Theodore’s impressed with his 2011 Kubota 3400 4-WD tractor equipped with a Woods front-end loader. “This little tractor has a lot of power and just keeps on going. It never fails to start and still has the original battery.”
He’s disappointed with his Swisher walk-behind string trimmer. “We wanted an electric start model but the dealer said it wasn’t necessary. However, we find it takes 3 people to start this trimmer and when it gets hot, it won’t start at all. We finally junked it and bought a DR electric start model.”
“I operate a landscaping business and am well-pleased with all my Stihl equipment which includes many different chainsaws, chop saws, trimmers and blowers. I have more than $4,000 invested in Stihl products.”
. “I read about the Lumber Smith portable sawmill in FARM SHOW. It sounded good so I bought one. I can’t believe how easily the blades break. I wish I had saved my money and bought a standard sawmill instead.”
“I’m happy with my Kinze 1300 grain cart equipped with tracks and an electronic scale. It operates smoothly going over center pivot irrigation tracks and isn’t top heavy. It also unloads fast and has an accurate scale.
“My 2013 Deere 825I Gator has been in the shop continuously for repairs. The warranty ran out early last year, and since then I’ve spent more than $3,000 on repairs. That doesn’t count all the repair work done while it was still under warranty.
“I like my 2014 Case IH 400 tracked tractor, but the Goodyear tracks haven’t held up very well. They had less than 1,000 hrs. on them at the beginning of last fall but already were in poor shape, with chunks of tread missing. Goodyear says it isn’t their fault, and Case IH will only offer to sell me new tracks at a reduced price.”
Joe’s impressed with Rock “N” Roll bicycle chain lubricant (www.rocklube.com). “What I like about this lube is that it doesn’t attract dust and dirt. It works great for everything from light chains to hinges, padlocks, and a lot of other things.”
“In 2001 I bought a Bunn coffee maker to use at work, and it has made at least 3 pots of coffee a day ever since. Each pot brews quickly and consistently. The Bunn coffee maker we had been using before this one lasted more than 20 years, so I guess we’re not surprised. They’re well made and worth the money.”
A 2012 Bad Boy Outlaw zero-turn riding mower equipped with a 31 hp. Kawasaki engine and 61-in. deck rates as Faris’s “best buy”. “We use it weekly to mow 3 properties totaling about 6 acres. It always starts and has ample power, and the deck is built heavy and never bogs down.
“The 2002 Kioti K-2554 20 hp, 4-WD tractor I bought used 10 years ago is just the right size and power for my needs. I use it to till our garden and to clean out our barn.”
Charles is the owner of a 2001 Ford New Holland 43 hp., 4-WD diesel tractor. “This tractor is a dandy. It’s powerful, dependable, and starts in the coldest weather. I can bushhog all day with it and still have plenty of fuel left in the tank when I’m done. An excellent tractor.”
Topper read in FARM SHOW about the kit from the spikes grip. A spring keeps the pads tight against the trunk. Don Knasel that turns a garden tractor into a mini-8N Ford (www.awesomehenry.com; ph 937 489-8440). He decided to convert a Toro 1238 riding mower. The kit consists of a single piece fiberglass hood that fits over the tractor and is reinforced at the bottom. It attaches with 2 bolts.
“It was a fun project, and they’re good people to work with,” says Topper.
He bought a Brush Grubber brush pulling tool that’s designed to yank out small trees and brush by the roots, completely eliminating regrowth (www.brushgrubber.com; ph 952 945-9058). The tool consists of a pair of rotating “grip pads”, with 8 spikes on each pad. The pads attach to spring-loaded, scissors-type jaws that tightly grip the trunk when pulled backward. The harder you pull, the harder
“I bought it to remove honeysuckle bushes on my farm and have found that it works exactly as advertised,” says Johns. “I use it with my Kawasaki Mule utility vehicle. It’s extremely well made.”
“My Harbor Freight 5-drawer tool cart has a rated capacity of 750 lbs. Fully loaded, the large caster wheels make the cart easy to move around, even on a rough or cracked floor. This tool cart was a bargain at $169, which is only about a third the cost of other, lesser-quality products.
“Two years ago we installed eight 12-volt Trojan batteries in our solar power system and they’ve been trouble-free (www.trojanbattery.com; ph 800 423-6569). Other batteries we’ve tried have failed in as little as 6 mo.
“We built our house using a Makita 10-in. power miter saw. It cuts square every time, even after being reset to cut angles. The angles are perfect and repeatable. It’s equipped with a Freud blade, so every cut is perfectly smooth with no splintering. I highly recommend both the Makita saw and the Freud blade (www.freudtools.com; ph 800 334-4107).
“My 1994 Husqvarna 66 chainsaw has performed flawlessly with no repairs and still has the original spark plug. When the fuel hose collapsed a couple of years ago, I discovered the only available replacement hose was too short. (It’s a special molded hose with one end larger than the other and an integral grommet to seal where it goes into the tank). The dealer and company rep argued that the new, shorter fuel hose was correct, but the hose can’t reach the fuel once the tank goes below half-full. The arrogance and unhelpful attitude of this company was disappointing.”