Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 5, No. 3 (1981)

Best & Worst Buys: FARM SHOW Vol. 5, No. 3 (1981)

42 reports from pages 10–12 · 37 Best Buys10 Worst Buys · See everything in this issue at FARM SHOW →

Best Buy

International Harvester

Dennis Kampen, Breckenridge, Mo · Vol. 5, No. 3 (1981), p. 10

Dennis Kampen, Breckenridge, Mo: “We had trouble from the start,” says Dennis, upset with his International 2 plus 2 3588 tractor, “At 50 hours, the main transfer case went out. With the strike on, getting parts was a problem. After it was returned from the shop, we did not even make it across the field when the hydraulic pump went out. After that was repaired, in the middle of spring planting, a bolt left inside the torque amplifier at the factory ran up through the gears. As our saddle tanks were designed just for a 2 plus 2, we had to stop spring work as we could not incorporate our chemicals. Our local dealer did all he could, including spraying some of our ground, but the district representatives could have cared less. No replacement tractor was given to us. We were down for 12 days during planting. Other problems, such as the hood rolling off the tractor and bending, and several gauge malfunctions, have plagued us. The design and fuel consumption are great but linate HERE ide International's field representatives and their factory people have turned us away from red tractors.” Dennis is well satisfied, however, with another International product, his 490 disk. “Our 490 is built heavy enough to handle the everyday strain put on it. Easy to maintain and pulls easier than most other makes,” he says.

See this page at FARM SHOW →
Worst Buy

Lester Versteeg, Monmouth, Ore · Vol. 5, No. 3 (1981), p. 10

Lester Versteeg, Monmouth, Ore: ‘ ordered a grain cleaner on Nov. 16, 1980 from Grain King Corp., in Minneapolis, Minn. They requested full payment by cashier's check ($3,952) which I sent. They promised delivery by Dec, 16 as I was scheduled to put it into service at that time. The machine finally arrived Jan. 13 but it was incomplete soT could not use it. had to have my wheat cleaned commercially. Numerous phone calls were made to the company but the salesman and manager were always unavailable. A certified letter was sent but again no response. “The company has my money and! have a machine that is absolutely useless. This is definitely my worst buy of all time,’ Lester told FARM SHOW.

See this page at FARM SHOW →
Best Buy

John Deere

Larry Manternach, Cascade, Iowa · Vol. 5, No. 3 (1981), p. 10

Larry Manternach, Cascade, Iowa: “My two John Deere 716A chopper boxes, mounted on Deere tandem axle wagons, are best buys,” says Larry. “They're very stable on rolling ground, have large capacity, and are easy to service, Belt drive delivers forage to the blower evenly from start to finish.”

See this page at FARM SHOW →
Best Buy

Roman L. Stoltzfoos, Free Union, Va. · Vol. 5, No. 3 (1981), p. 10

Roman L. Stoltzfoos, Free Union, Va.: “This fencer will shock through weeds like no other fencer. Half the cost or less of regular fence and easy to erect,”’ reports Roman, happy with his Gallagher electric fencer and high tensile fencing system from Brookside Fencing, Turnbridge, Vermont, “T put up my fence and didn’t check it for over a year and it was still putting out a good shock. The wire is spring-loaded and had it running through brushy country. One time, a big round bale rolled right over it without any damage whatsoever. No one could sell me any other type of fence, both for it’s dependability and ease of erection.” Roman's had some trouble with his Sears 225 amp welder. ‘‘It doesn't do a real good job of welding like we'd like to see. It's hard to start the arc and harder yet to hold it after we get it. Just not a heavy-duty farm welder. Also had trouble with the cooling fan. And it doesn’t have D.C., which makes it unhandy to weld certain metals."

See this page at FARM SHOW →
Best Buy

Massey Ferguson + 1 more

Ray Bedel, Metamora, Ind · Vol. 5, No. 3 (1981), p. 10

Ray Bedel, Metamora, Ind: “lor the livestock farmer, there's nothing like it,” says Ray, pleased with his AO Smith Harvestore 2080 and 2535 silos. ‘We were grinding and mixing our own feed before and it became a daily chore. Now. with the flip of a switch, we have the best feed obtainable without the hassle. You only have to handle the feed once — when you put it in. “We also like our Slurrystore. Lets us hold manure from the dairy until time and weather let us put it on our fields.” On the minus side, Ray registers this complaint about his Massey Ferguson 180 tractor: ‘Had to have the multipower system worked on twice in one season. Also, the starter locks up on cold days.” A.J. McCashin, Jr., Mocksville, N.C.: He says all his ‘best buys" are New Holland equipment. ‘We like our 479 Haybine, our 263 baler, our 1001 bale wagon and our manure spreader. They all take little maintenance and we get the best service.” Kenneth and

See this page at FARM SHOW →
Best Buy

Kenneth and Gail Johnson, Menomonie, Wis. · Vol. 5, No. 3 (1981), p. 10

Kenneth and Gail Johnson, Menomonie, Wis.: ‘‘We were only getting 4 mpg until they adjusted it,” say Kenneth and Gail, pleased with their 1979 4x4 heavy-duty 1/2 ton truck. ‘After they adjusted it, we now get 14 to 15 mpg. The truck is comfortable riding. The four-wheel drive is nice to have when you get in deep snow or mud, and the box size is just right for our needs. We use the truck every day for our repair shop. Another good buy is our 50-ton hydraulic press from the Owatonna Tool Co,, Owatonna, Minn. Don't have to worry about running out of power!" The Johnsons add that “FARM SHOW is also one of our ‘best buys’. A friend gave us our first subscription and we've since taken it on our own. We've sent for several of the new products and ideas.”

See this page at FARM SHOW →
Best Buy

Vermeer

Herbert Condalary, Mt. Hermon, La · Vol. 5, No. 3 (1981), p. 11

Herbert Condalary, Mt. Hermon, La: “I've had this truck about one year. The drive train leaks, the engine has no power, the material in the body is flimsy and so is the workmanship. The only good thing is that it rides and drives good, and the dealer gives good service,” says Herbert about his 1980 Ford F-250 4x4 3/4 ton pickup. He's pleased, though, with his Vermeer model E£ hay baler. “This is my third Vermeer baler and, while they've all given great service, this model is the best Vermeer has produced. It's the best baler I've ever used in rye grass hay in our humid southern springs, I've run this baler all afternoon without a single clog-up. After nearly 10 months and 1,000 bales, haven't had to replace a single part.’

See this page at FARM SHOW →
Best BuyWorst Buy

Roger Harrington, Richland, lowa · Vol. 5, No. 3 (1981), p. 11

Roger Harrington, Richland, lowa: ‘I installed these nipples in my finishing house and nursery. After just a few days use, many were leaking and needed repairs. After two weeks use, several had fallen apart. After six months, all were replaced by another brand," says Roger about his “worst buy’ ILECO nipple hog waterers. On the ‘best buy" side, he’s happy with his Calumet 2250 gal. liquid manure vacuum tank. ‘Since we purchased it. we've had no major problems at all. The pump operates perfectly whether loading or unloading, It spreads on top of the ground with smooth, even application, It will also knife liquid into the ground quickly.”

See this page at FARM SHOW →
Best Buy

John Deere

Robert Kennell, Roanoke, IIL · Vol. 5, No. 3 (1981), p. 11

Robert Kennell, Roanoke, IIL: ‘I'd rather operate this combine than sit in my big easy chair at home,” states Robert, pleased with his Deere 7720 combine with 830 cornhead., “It re“I'd rather operate this combine than sit in my~ easy chair at home.” places a 7700 for us. It has more capacity and a much quieter cab. The improvements I-like are the unloading auger and control arrangement in the back. In 1,600 acres so far, we have had one minor breakdown but our local Deere dealer had us going in two hours. His service and the Deere warranty are the best." Robert's disappointed, though, in Basagran herbicide for soybeans. ‘Basagran just did not do the job on one of my fields last year. We put on one quart per acre and it did not get button weeds. A lot of these weeds were only 2-in, high and it still didn’t get them.”

See this page at FARM SHOW →
Best Buy

Allis-Chalmers

Sonny Miller, Headrick, Okla · Vol. 5, No. 3 (1981), p. 11

Sonny Miller, Headrick, Okla: He's had trouble with his 1980 Oldsmobile Cutless Calais. ‘When we first got the car we had trouble with the air conditioner. Had it in the shop three times for a vacuum leak. The car is advertised to get 27 mpg but is only getting 19 mpg. It's been in the shop two other times trying to tune it for better mileage. It has the new C4 computer emissions control and, as we write now, it’s in the shop with the computer system out. By far, it's the most trouble I've ever had with an automobile.” Sonny's had good luck, though, with his Allis Chalmers 7080 tractor with Goodrich radial tires. ‘We're well pleased with the power of this tractor. It's rated at 181 hp and tested at 205 hp when I put it on the dyno. So far, in 500 hrs. of operation, no service calls or repairs or adjustments. like the radial tires. Well worth the difference in price.”

See this page at FARM SHOW →
Best Buy

Stihl

Roger Jackson, Parma, Mich · Vol. 5, No. 3 (1981), p. 11

Roger Jackson, Parma, Mich: Heading Roger's “best buy" list is a wood-burning Monarch Add-AFurnace. “With the blower attachment, it’s very efficient and, although our house is 2,000 sq, ft., we have used no fuel oil.” He's also pleased with his Stihl chainsaw, model 028 WB. "Starts good, runs smooth and has been trouble-free. 1 accomplish so much more and still feel good after hours of cutting.”

See this page at FARM SHOW →
Best Buy

Stihl + 1 more

Fred Carra, Niotaze, Kan · Vol. 5, No. 3 (1981), p. 11

Fred Carra, Niotaze, Kan: Fred's unhappy with his Stihl chainsaw, model 020 AV. ‘When I boughtit, the engine wouldn't keep running so took it back to the dealer and it cost $12.50 to get it to run. Then, when it wouldn't start, took it back again. This time it needed a new part for the air intake to the carb. It took four months and $40. After two hours of sawing, it quit. Took it to the dealer again, The saw cylinder was full of sawdust. The dealer said that for $160 he would fix it. threw it away with less than 10 hrs. use.” On the plus side, Fred likes his International 241 round baler. “I've baled over 600 bales of alfalfa fescue, prairie hay, milo stubble and straw without one cent of expense except twine.”

See this page at FARM SHOW →
Best Buy

John Deere + 1 more

Charles Flaming, Paxton, Neb · Vol. 5, No. 3 (1981), p. 11

Charles Flaming, Paxton, Neb: “I'm a firm believer in having the best corn planter for the best yields and the Deere 7100 folding Max-Emerge planter does the job!" Charles told planter four years ago. What a difference in stand over our old no-till planter. There's no end to bragging about the uniform depth and even distribution of seed planted. We had the old Max-Emerge four years and just traded for a new model. You couldn't give me any other planter. One attachment that we added are the Acra Plant trash whippers. They allow us to plant in heavy trash conditions. We believe this planter has increased our yields by 20 to 30 bu. per acre.” On the negative side, Charles says, “My advice to farmers with late 70's model pickups is to keep them, Don't buy the 81's. They aren't worth it. Our new Ford 250 has a smooth ride for a 4-wheel drive but that's all, After 1500 miles, it started to use a lot of oil. The body is terribly tinny, it has a thin, poor paint job and we are experiencing small motor problems.”

See this page at FARM SHOW →
Best Buy

Averill DeMers, Dunseith, N. Dak · Vol. 5, No. 3 (1981), p. 11

Averill DeMers, Dunseith, N. Dak: “We applied Hoelon on durum to control wild oats and foxtail. Had virtually no control except where it was applied twice with a 3-day interval between applications,’ says Averill, “Compared to other herbicides, “Had virtually no control except where it was applied twice.” it seems to be very expensive and has little effect unless you double the rate. That only makes it that much more expensive to use to get any control,” On the positive side, he likes National Band and Tag Company's steel ear tags for cattle. ‘Have used this tag on young and old stock, Like the product because it is easy to use, For almost permanent individual identification, it's the best tag we've ever used. They don’t pull out of the ear easily since they're clinched together and the tag is fairly easy to read, although we do use the Temple anchor tag for field observation.”

See this page at FARM SHOW →
Best BuyWorst Buy

International Harvester

David A. Williams, Currituck, N.C · Vol. 5, No. 3 (1981), p. 11

David A. Williams, Currituck, N.C: “I'd like to nominate FARM SHOW as one of my ‘best buys’. It's the best publication I've ever read. Another good buy is Haines Potato Equipment from New York. We've had very few problems and great factory service. “My worst buys include a 475 International disk and a Motorola two-way radio system. The disk will not cut deep or leave the ground level. Bolts are always coming loose. Has not given good service at all, The radios are always skipping and need service. They don't have near the range or clearness that we were sold on,”

See this page at FARM SHOW →
Worst Buy

Case

Loy Kern, Morton, Tex · Vol. 5, No. 3 (1981), p. 11

Loy Kern, Morton, Tex: He likes his Case 2390 tractor, “It's been almost trouble-free in two crop years. Fuel consumption is minimal, employees love to drive it and it has the best draft control system I’ve ever had. Dealer is good, too.” Loy’s 1979 Ford LTD is his ‘‘worst buy”. “It’s made mostly of plastic and is hard to start. I've had nothing but trouble with the auto-temp control and transmission went out at 48,000 miles, Also, the electric door lock on the passenger side gives trouble constantly.”’

See this page at FARM SHOW →
Best Buy

Walter Bushfield, Balzac, Alberta · Vol. 5, No. 3 (1981), p. 11

Walter Bushfield, Balzac, Alberta: “My best buys are my German Deutz tractors. have a 1972 10006 and a 1977 13006. At 4,000 hours, nothing has been done with the 10006. Only problem with the,J3006 has been the air conditioner and that's made in the U.S. We have a pull-type combine and can go for two days on 52 Imperial gal, of fuel, averaging 10 hours or more per day," says Walter.

See this page at FARM SHOW →
Best BuyWorst Buy

John Deere

George Steele, Lawrence, Kan · Vol. 5, No. 3 (1981), p. 11

George Steele, Lawrence, Kan: “My ‘best buy’ and my ‘worst buy’ happen to be the same item. An electronic bug killer from Sears Roebuck,” says George. “It worked wonderful but, when it played out, it took them two months to replace the transformer at a cost of $60. When plugged it in after the repair, it mace a loud humming noise which wasn't normal, took it back to their service station. Another two months went by before they called to say it was ready. When we picked it up, they said nothing was wrong with it. ‘ wrote Sears in Kansas City about it. have their card dated Nov. 20, 1980 saying I would get additional word shortly, but haven't heard from them, Am tempted to sue them to take ‘satisfaction or your money back’ off their catalogs. No more Sears for me. “One of my ‘best buys’ was a little 3-pt. backhoe made in Claremore, Okla.,"’ adds George. ‘‘I believe Hesston owns the factory now.” Lyle Heimbigner, Ritzville, Wash,: “My best purchase in 1980 was John Deere's soft black paint. When thinned 50% with paint thinner it applies fast and easy to disk blades and header platforms to prevent rusting. The real beauty is that it's selfscouring and the price is right,” Lyle

See this page at FARM SHOW →
Best Buy

R. Hill, Sweetwater, Tex · Vol. 5, No. 3 (1981), p. 11

R. Hill, Sweetwater, Tex: ‘The worst purchase ever made is, without a doubt, an Ashley wood heater. Its poor construction, lack of performance and insatiable appetite for more wood are reasons why I would not have another one," Hill concludes.

See this page at FARM SHOW →
Best Buy

Bradley Pattington, Scipio Center, N.Y · Vol. 5, No. 3 (1981), p. 11

Bradley Pattington, Scipio Center, N.Y: “I'd like to nominate Cafkart from Raytec Manufacturing in Ephrata, Penn., as a best buy,” says Bradley. ‘It makes moving even the most stubborn calf, from newborn to 300 lbs. or over, a one man or woman job, anywhere you can roll a twowheel cart."

See this page at FARM SHOW →
Best Buy

Elmer Hastect, Holgate, Ohio · Vol. 5, No. 3 (1981), p. 11

Elmer Hastect, Holgate, Ohio: He's happy with "a small hand-held 12-V battery operated chain saw sharpener called the Grind-N-Joint from Grandberg Industries, Richmond, Cal. A real nice little time-saving tool. Better than a file any day. Runs off the pickup battery.”

See this page at FARM SHOW →
Worst Buy

International Harvester

Louis Price, Lakota, Iowa · Vol. 5, No. 3 (1981), p. 11

Louis Price, Lakota, Iowa: ‘My worst buy for many years was two 820 International bean platforms. They have been designed without wear plates behind the sickles. I used one for three days and the other for a week and had to rebuild both cutterbars before I could finish my soybeans. The IH rotary combine itself is good but the cutterbars are complete disaster,’ says Louis. Best And Worst

See this page at FARM SHOW →
Best Buy

Chevrolet

Calvin Riedel, Dover, Ark · Vol. 5, No. 3 (1981), p. 12

Calvin Riedel, Dover, Ark: “Oddly enough,” says Calvin, ‘‘my best and worst purchase was the same item from the same company, a Clay 1,500 gallon liquid spreader that bought with three other farmers. It was a single axle job so you couldn't keep a drawbar on your tractor. We have a hilly farm so it pulled the tractor just about as much as the tractor was pulling it. Also, just about every time you went to the field, you'd get a shower bath with hog litter. The pump would spray back on you. We'd install new seals in it that would last a short while, then the same thing would happen again, “Later, enlarged my operation and had to buy one of my own. I bought the same size and put it on an old 1952 Chevy 2-ton truck. Have never had a minute of trouble with the pump on this unit in four years, hauling manure from 8,000 head of hogs. We've also found this unit to be very good for hauling water to fight woods and pasture fires last summer when we were so dry.”

See this page at FARM SHOW →
Best Buy

Lyman McKee, Madison, Wis · Vol. 5, No. 3 (1981), p. 12

Lyman McKee, Madison, Wis: “With today’s high interest rates and continued efforts to build sales, the attitude of some companies toward their customers is enough to stagger the imagination. ‘We are the owners of a Hagie weed sprayer and, because of the limited number of these machines, there is no local sales representative or parts depot. Any needed repairs must be ordered directly from the Hagie Company in Clarion, lowa. During May of 1980, we ordered repairs, some of which were in error. We received a credit memo from Hagie in the amount of $191.60. No money was returned to us, just the credit memo. For nominal amounts and, in the case of equipment dealers with whom we deal regularly, this is standard practice. In the case of Hagie, given the amount of the credit memo, plus the fact that it would be unlikely we would be ordering any items in the forseeable future, I wrote to Hagie and asked them for reimbursement. I did not even receive the courtesy ofa reply. They just kept the money. ‘While preparing our annual year-end report, our auditors noted the amount and wrote to Hagie suggesting it be repaid to us. Again, no reply. Subsequently, called the Hagie Company, and was told they would think it over but not to worry. Again, nothing happened so wrote asking reimbursement and again, they do not even extend the courtesy of answering.”

See this page at FARM SHOW →
Best Buy

John Deere + 1 more

Dale D. Bruns, Chappell, Neb · Vol. 5, No. 3 (1981), p. 12

Dale D. Bruns, Chappell, Neb: Dale nominates his John Deere 4840 tractor as a best buy. ‘In 1,500 hrs., this has been a basically trouble free tractor. Plenty of power, easy to operate, quiet. Like the hydraulic controlled seat.” Jack Varner, Jr., Tallulah, La.: “Can't keep the disk blades tight, the T. 9 464 > PAPAS @aesewatar -~as page) mud scrapers come loose and stop the seed flow, and it's made from very light material,’’ says Jack, disappointed with his 28-ft. Crustbuster double-disk opener grain drill. “We've asked for help from Crustbuster representatives and can't get help. We have two more Crustbuster 28-ft. drills — the hoe type — and we are very satisfied with their performance under any circumstances.” On the plus side, Jack’s pleased with his International 3588 tractor. “Versatile, with 10 to 15% less fuel consumption and easy maintenance. Very pleased with its performance. Does the jobs that any dual wheel tractor does with less compaction.”

See this page at FARM SHOW →
Best Buy

Ed Fenton, Sears, Mich · Vol. 5, No. 3 (1981), p. 12

Ed Fenton, Sears, Mich: ‘We're nominating our Australian Blue Heelers as a ‘best buy’ in herding dogs. I do most of the work with our pigs alone and these dogs, with their bred-in ability to herd, have saved countless steps and having to hire extra help. Although they also herd cattle and sheep, they are fearless with swine, which we find quite remarkable," reports Ed.

See this page at FARM SHOW →
Best Buy

Mike Meier, Poplar Grove, IIL · Vol. 5, No. 3 (1981), p. 12

Mike Meier, Poplar Grove, IIL: “Our cows seem to enjoy it,’ says Mike, happy with his ‘best buy” Tox-O-Wik mineral feeder and back scratcher, “Although it was expensive, long term benefits make this unita best buy for us. Dealer service is great. If there is a problem, one phone call solves it.” On the minus side, “Maes inflations were a big disappointment to us. We milk about 70 cows. We weren't happy with our DeLaval inflations, and thought we'd try some- thing else. We're going back to DeLaval after only two milkings with Maes.”

See this page at FARM SHOW →
Best Buy

Henry Chaput, Walhalla, N. Dak · Vol. 5, No. 3 (1981), p. 12

Henry Chaput, Walhalla, N. Dak: “Last fall we bought a Tox-O-Wik 500 bu. grain dryer and are well satisfied with it. We especially like the grain cleaner on this model 570. It takes a lot of screenings out as you dry grain. Easy to operate.”

See this page at FARM SHOW →
Best Buy

John Deere

Phil Armstrong, Onca, Neb · Vol. 5, No. 3 (1981), p. 12

Phil Armstrong, Onca, Neb: ‘I bought a Farmhand 258 loader because they are supposed to be easy to put on and take off. I guess it would be if you had a perfectly level cement slab to do it on. Also the bucket doesn’t tip back far enough to keep anything in it.” Phil nominates his Deere 4440 tractor as best buy. “This 4440 is by far my best purchase. Real handy and easy to run for the horsepower. wouldn't know about service as it has never had to be in the shop.”

See this page at FARM SHOW →
Best Buy

Doug Johnson, Moose Jaw, Sask · Vol. 5, No. 3 (1981), p. 12

Doug Johnson, Moose Jaw, Sask: He’s pleased with his Hesston 6450 swather with 15 and 20-ft. headers. “I'm pleased with performance ofthe tractor unit for handling, vision and operator comfort. The quickattaching headers are easy to change and perform well in lentils, coarse grains, wheat and flax. The doubleknife drive allows for fast cutting in thick and hard to cut crops. Dealer service has been excellent."

See this page at FARM SHOW →
Best Buy

Allis-Chalmers

Jim Burtman, Alamo, N. Dak · Vol. 5, No. 3 (1981), p. 12

Jim Burtman, Alamo, N. Dak: Jim nominates three ‘‘best buys’? — his Honda GL 1100 Interstate motorcycle, his Kongskilde air grain mover, and his 7000 Allis Chalmers tractor. “I have over 100 miles to go round trip for parts and, with the cycle geta “Somebody has to be on standby every time it’s in use.” ting 45 to 50 mpg at 70 mph, you'd be surprised at how much it saves. I can’t think of anything I dislike about this bike. “The grain mover, made in Denmark, does what it claims to do, and quietly. Our dealer has made sure we're satisfied in every way. “The AC tractor is tops, except for shifting. You can't get it out of gear if it's stopped, and the company can't cure it.” On the minus side, Jim. says he’s disappointed with his Leon 43-ft. chisel plow. “Something is always wrong with it. from losing shanks to breaking the frame. Somebody has to be on standby every time it’s in use. I can't see why the company can't put more pride and effort into their product,”’

See this page at FARM SHOW →
Best Buy

John Deere

Garnet Grimm, Shellbrook, Sask · Vol. 5, No. 3 (1981), p. 12

Garnet Grimm, Shellbrook, Sask: “Cleans just about everything. Does a great job!" says Garnet, pleased with his Deere 18A high pressure washer. “It really takes the dirt off machinery, pumping 520 psi at 1.8 gal. per minute. Light to pull or carry around, takes little space to store. No troubles at all with it.”

See this page at FARM SHOW →
Worst Buy

Allis-Chalmers + 1 more

Charles Gunderson, Glenville, Minn · Vol. 5, No. 3 (1981), p. 12

Charles Gunderson, Glenville, Minn: His ‘‘worst buy" nomination is his ‘‘Allis Chalmers Gleaner CII combine bought in 1979. I bought it used and have had to almost go completely through it front to back, top to bottom but mostly it's that the bearings are going out again and again. The dealer gives good service and that's the only reason it's still on the place. Repairs are finally getting fewer on it.” Charles adds that his Husqvarna model 65 chainsaw “has worked out well. Service was excellent in fixing a gasket leak and I have found no other saw to be as good for power, speed, handling and servicing.”

See this page at FARM SHOW →
Best Buy

Michael Rose, Town Creek, Ala · Vol. 5, No. 3 (1981), p. 12

Michael Rose, Town Creek, Ala: “Since we bought ours, 19 additional units have been purchased by neighboring farmers,"’ says Michael about his best-buy Commtronix FM 2-way radio system. “It performs efficiently and with very little problems. All neighboring farmers have the same frequency on one channel, We get prompt service from the factory in case of problems.”

See this page at FARM SHOW →
Worst Buy

Edwin P. Good, Grandview, Idaho · Vol. 5, No. 3 (1981), p. 12

Edwin P. Good, Grandview, Idaho: buy,” savs Edwin. ‘I really enjoy all the new products featured in the magazine. The column like least is the Best and Worst Buys. As far as I'm concerned, it could be eliminated. Seems too radical for me."

See this page at FARM SHOW →
Best BuyWorst Buy

Ford + 1 more

Richard Van Ee, Vermilion, Alberta · Vol. 5, No. 3 (1981), p. 12

Richard Van Ee, Vermilion, Alberta: ‘We've had 19 Fords in the past but we're going to try a GM this spring,” says Richard, upset with his 1979 Ford F'-150 pickup. Gas mileage is great but the steering is the worst I've ever seen, It's all over the road. We've had it back to the dealer 13 times but they say they can't fix it and told Ford Motor Co. about it. They say it's all right but it isn’t. I feel this is Ford's problem and they won't look after it. “Another bad buy was my Massey Ferguson 1135 tractor,"’ Richard continues. “The rear end, the hydraulics and the pto have been nothing but trouble. We've spent about $4,000 to $5,000 on it and the tractor has only 1,500 hrs. on it. wouldn’t have another."

See this page at FARM SHOW →
Best Buy

Wayne Miller, Decatur, lowa · Vol. 5, No. 3 (1981), p. 12

Wayne Miller, Decatur, lowa: ‘‘We like Kewanee harrows for speed and endurance. Have had several used ones. The first new one! bought was a 21-ft. model. Just the right size for teenage boys to pick up and haul on the trailer. Then we bought a used 24-ft. model on a Lindsay cart and used it till the teeth wore down about half way. In 1980 we bought a new one from the dealer at Murray, Iowa. The teeth were just spot-welded in. made a remark about it to the dealer before the sale was made and did lose some 6 to 8 teeth that year. Last fall the dealer called me to bring the harrow in, They repaired and repainted it, call that service.”

See this page at FARM SHOW →
Best Buy

Stihl

Dennis Wischmeyer, Ottawa, Ohio · Vol. 5, No. 3 (1981), p. 12

Dennis Wischmeyer, Ottawa, Ohio: ‘My Dad bought one with the same results,’ says Dennis, pleased with his Stihl 041 AV chain saw with a 20-in. roller tip bar. “We used it extensively and it’s performed excellent since day one. Lots of power, smooth to run and not offensively noisy. Hasn't been back to the dealer since purchased last fall. Even though it was somewhat more expen‘sive then another brand, I believe it was well worth it.” Dennis also likes his Earth Stove from Earth Stove Mid-American, Cambridge, Ohio. “It's an air-tight stove. I installed a Magic Heat in the chimney pipe and have used it two winters. Puts out a lot of heat with a minimum of wood.”

See this page at FARM SHOW →
Best BuyWorst Buy

White + 1 more

Mark Holl, Evansville, Minn · Vol. 5, No. 3 (1981), p. 12

Mark Holl, Evansville, Minn: ‘My best purchases are a 588 White plow and a 15-ft. White Kwik-Cut soybean header. The 588 is practically impossible to plug with its 20-in. bottoms. Stalk fields are as black as most that have been chopped before plowing. The Kwik-Cut head allows faster field speeds with less shatter loss and is easy to repair because sections bolt on with 1/4 in. bolts.” Mark says his worst purchase was his “model 18A John Deere power washer. It's always been hard to get primed. Won't draw detergent from the reservoir and was at the dealer's for months but they never looked at it. I took it home and put a new solenoid valve in but it still did not help. It's awkward to move around and is overpriced.”

See this page at FARM SHOW →