Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 22, No. 6 (1998)

Best & Worst Buys: FARM SHOW Vol. 22, No. 6 (1998)

43 reports from pages 14–16 · 39 Best Buys15 Worst Buys · See everything in this issue at FARM SHOW →

Worst Buy

Farmstead Prod-ucts

Larry Collins, Belvidere, S. Dak. · Vol. 22, No. 6 (1998), p. 14

“This grain cleaner is advertised to clean 300 bu. per hour, but it won’t clean 50,” says Larry about his “worst buy” seed and grain cleaner he bought a year ago from Farmstead Prod-ucts, Hinckley, Minn.

“The whole machine shakes from side to side, which causes bolts to come loose all over the machine. The rubber ball screen cleaning system at the bottom doesn’t work and the shoe is so heavy it won’t shake. I called and asked for help, but the person at the company said he was too busy. I asked for a refund, but he said he was short on cash. I asked to sell it back to him, but he said he was not in the market for a grain cleaner.”

Best BuyWorst Buy

John Deere 466 round baler heads + 1 more

Alex Brenneman, Elkhart, Ind. · Vol. 22, No. 6 (1998), p. 14

A 1997 Deere 466 round baler heads Alex’s list of best buys.

“After more than 8,000 bales, this baler still makes the tightest, densest bales of any machine on the market. The computer controls so many functions that one rarely needs to leave the tractor seat during a full day of baling. The belts and splices are so tough that five of the six belts are originals. The other was replaced under warranty with no hassles. The mega-tooth pickup does an excellent job while baling at a typical speed of 8 to 10 mph.”

On the negative side, Alex has had problems with his H&S 430-bushel manure spreader.

“It’s made so cheaply our 20-year-old Knight spreader is in better shape. First, the hitch bent. Next, the beaters bent because they’re built so soft and thin. Then, the end-gate bent back so far it contacts the beaters when it’s raised. The bearings on the beaters went bad three times. The spreader is permanently in high gear because the shaft connecting the low gear sprocket broke in half. To top it off, the seals on the end-gate cylinders blew out because the cylinders are cheap. We replaced the seals only to have the same problem again. We ended up replacing the cylinders with after-market cylinders. The company told us they would pay to have the hitch reinforced at a local welding shop and that they would replace the beaters free of charge. Since having the hitch reinforced, we have been in contact with the dealer we bought it from but have heard nothing further from the company.”

Best BuyWorst Buy

New Holland TX66 combine equipped + 1 more

Craig Shaw, Lacombe, Alberta · Vol. 22, No. 6 (1998), p. 14

“I only wish I’d found this machine sooner,” says Craig about his 1997 New Holland TX66 combine equipped with a 25-ft. Honeybee header. “It’s a well thought out machine from front to back. The header controls and vine lifters allow the machine to work equally well in lodged or standing crops. The back of the combine allows me to drop straw or chop it very fine with the flip of a lever. Performance outshines New Holland rotary machines when conditions are tough. I’m putting on fewer hours and doing more work with it than with the 1991 R-70 Gleaner I had before.”

On the other hand, one of Craig’s worst buys is his Sakundiak 65-ft. mechanical swing auger.

“While I had extremely good luck with their standard augers, I paid a premium price for this poor unit. We had numerous bearing failures but the worst problem was with shear pins. They broke off and were difficult to replace because of their location. I can’t afford to keep a machine that is not only slow but unreliable as well.”

Best Buy

John Deere 2-WD 8100 tractor

Peter M. Friessen, Meade, Kan. · Vol. 22, No. 6 (1998), p. 14

Peter’s well pleased with his 1997 Deere 2-WD 8100 tractor. “It has plenty of power and is easy on fuel. The Comfort Cab is real quiet and easy to get in and out of, and the air ride seat is exceptionally comfortable. My only complaint is that shifting between 12th and 13th gears is not as smooth as I feel it should be. However, I understand the dealer can fix that.

“I bought front wheel fenders from an after-market dealer and they work well in keeping gravel from hitting the windshield” (M.D. Products, 1998 215th St., Humboldt, Iowa 50548; ph 515 332-3550).

“I also used copper tubing to move two grease fittings to the side of the front axle pivot. This makes it a lot easier to grease than having to get under the tractor to service them.”

Best Buy

Ford Supercab pickup equipped

Ben Kambeitz, Richmound, Sask. · Vol. 22, No. 6 (1998), p. 14

“In 1979, I bought a short wheelbase Ford Supercab pickup equipped with a 460 cu. in. engine and C-6 automatic transmission with 3.50:1 axle ratio. Fuel economy was about 11 mpg with mediocre power.

“At 37,500 miles I replaced the heads with 1969 era 429 heads called DOVE-C’s. I also planed .050 in. off the heads to give me a 9.5:1 compression ratio and re-timed the camshaft to 1969 specs, which amounted to about an 8 degree advance compared with 1979 specs.

“The horsepower doubled and fuel economy went up to 14 mpg. Then I replaced the 3.50:1 axle with a 2.71:1 gear set, which gave me plenty of power and boosted fuel economy to 18 mpg.

“The truck now has over 212,000 miles on it and the pistons and automatic transmission have never been touched. It has never let me down in the field or on the highway even though I use it to pull trailers, old tractors, etc. I’m hoping to get over 300,000 miles out of this ‘best buy’ pickup.”

Best Buy

King Kutter rotary mower

Ken Scharabok, Waverly, Tenn. · Vol. 22, No. 6 (1998), p. 15

Ken’s worst buy is a 5-ft. King Kutter rotary mower. “Apparently the company doesn’t believe in using lock washers, as most bolts loosen up during operation. The weld holding the rear wheel to the hub broke and the gearbox mounting surfaces required an extensive rework because of loose bolts and stress cracks. My experience is about one hour of repair for every five hours of use.”

Best Buy

Polaris Big Boss 6-WD atv equipped + 1 more

Dennis Huwe, Bagley, Minn. · Vol. 22, No. 6 (1998), p. 15

Dennis’s best buy is his 1998 Polaris Big Boss 6-WD ATV equipped with 500 c.c., four-stroke engine. “It has replaced my pickup for 90 percent of the jobs around our farm,” he says. “I use it for everything from elk hunting in Colorado to fencing in swamps here at home and pull-starting full-size pickups. It’s never let me down. I’ve even built some specialized equipment for it that I use in my commercial berry patch, including a rear-mounted pull-type sprayer equipped with a 30-gal. tank and a ground-driven fertilizer side-dresser.”

Dennis is also happy with his Lincoln Weld-Pac 100 wire feed welder. “I’m not much of a welder but this little beauty is forgiving. It can be plugged into any 110-volt, 15-amp outlet or can be taken on-site to jobs and used with just the addition of a small generator. Although it is designed for light duty, it’s adequate for 80 percent of the welding jobs that I have around the farm.”

Best Buy

Sitrex RP/8 13 1/2-ft 6-wheel rake + 4 more

Cecil Harrington, Mayville, N.Y. · Vol. 22, No. 6 (1998), p. 15

Cecil’s best buy is an Italian-built Sitrex RP/8 13 1/2-ft. 6-wheel rake he bought used from his local Deere dealer in Clymer, N.Y. (06018 Trestina, Perugia, Italy; 075 854-0021, fax 0523). “Once we got it adjusted, it did a beautiful job of raking. We don’t know what year it is, but we wrote to the company in Italy and they sent us a book of instructions on how to adjust and use it.”

“They’ve all been good to me over the years,” adds Cecil, satisfied owner of a 1947 Farmall H, a 1950 IH 460, a 1973 Allis Chalmers 200 and a 1983 Same Panther 4-WD. “The 460 guzzles gas, while the old H runs all day on 5 gallons of fuel doing hard work. The first time we’ve ever had to send a tractor away for repairs was recently when the Allis developed internal transmission trouble and parts aren’t currently available.”

Best Buy

John Deere 345 lawn tractor equipped

Stuart R. Montgomery, Webster, N.Y. · Vol. 22, No. 6 (1998), p. 15

“It’s the best mower I ever owned,” says Stuart about his 1998 Deere 345 lawn tractor equipped with 54-in. mower deck. “The 18 hp V twin liquid-cooled engine with overhead valves has plenty of power. Cruise control lever, power steering, hydraulic foot controls, tilt steering wheel and hour meter are standard equipment.”

Worst Buy

Caterpillar Challenger 75

Thomas R. Harper, Simpson, Sask. · Vol. 22, No. 6 (1998), p. 15

“The poor customer service I received for what is otherwise a nice machine is a disgrace,” says Thomas who’s had trouble getting help with an air conditioning problem in a Caterpillar Challenger 75 that he bought in 1994.

“The first summer the air conditioning worked poorly. The dealer said the system was not cycling properly and would require a company-rebuilt unit. I managed to keep the air conditioning going over the next three summers while I tried to get the company to fix the problem. Last April, the company again said it would send someone out, but, as of October, the problem still hadn’t been fixed.”

Best Buy

Ford F-250 Superduty diesel pickup equipped

Philip Meyer, New Prague, Minn. · Vol. 22, No. 6 (1998), p. 15

Philip’s most recent best buy is his 1999 Ford F-250 Superduty diesel pickup equipped with extended cab and full box. “Handling is excellent and it rides better than a mini van we own,” he says. “It has awesome power and the Allison automatic transmission shifts exceptionally smoothly. It’s pretty fuel efficient, too, getting 14 to 18 mpg.”

Best Buy

Pride of the Farm feeders

Cody Griffin, Ames, Iowa · Vol. 22, No. 6 (1998), p. 15

“I wouldn’t use any other mineral feeder,” says Cody who’s had good luck with Pride of the Farm feeders (P.O. Box 2000, Hwy 16 West, Houghton, Iowa 52631; ph 800 553-1791).

“We bought our first one four or five years ago and it seems to be indestructible. One-ton bulls push it around but it still won’t flip over. The cover is made from recycled belting which keeps mineral fresh and dry. I’m so impressed, I became a dealer.”

Best BuyWorst Buy

Ford 4610 tractor + 1 more

Linden D. Park, Independence, Ore. · Vol. 22, No. 6 (1998), p. 15

Linden likes the handling and fuel economy of his 1989 Ford 4610 tractor.

“However, when making a left turn, the left front tire rubs on the steering control rod which comes from the steering wheel area to the front of the tractor. Seems like a glitch that could have been avoided by some common sense engineering.”

He’s also generally satisfied with his 1989 Ford 7210 tractor equipped with a bucket and forklift. “The operator could have a better view of the forks. Otherwise, it works fine.”

Best Buy

Caterpillar D-6C 17 R

Claude Pierret, Pasco, Wash. · Vol. 22, No. 6 (1998), p. 15

“Our best buy is the Caterpillar D-6C 17 R series tractor we purchased in 1974 with 200 hours,” says Claude. “The engine had 9,038 hours on it before it required an in-frame overhaul. The transmission, final drives, clutch lining and rear end gears have never been touched even though the tractor now has a total of 17,650 hours on it. It’s still used on a regular basis alongside a 1980 Cat D-6D we bought used five years ago.”

Best BuyWorst Buy

Ford F-150 XLT Lariat 4-wd pickup + 1 more

Mike Ksioszk, Fredonia, Wis. · Vol. 22, No. 6 (1998), p. 15

“Amazing,” says Mike about the 1990 Ford F-150 XLT Lariat 4-WD pickup he bought used with 84,000 miles on it. “This truck can pull 14,000 lbs. with the factory bumper hitch, more than my previous F-250 could pull. I’ve had no problems other than regularly scheduled maintenance. It now has 137,000 miles on it after four years. I only wish the clutch wasn’t so expensive to put in. It costs about $750 installed.”

On the other hand, one of Mike’s “worst buys” is his 1995 Polaris 300 4-wheel ATV. “It hasn’t idled right since it was new. I took it back to the dealer and he told me it was a matter of idle adjustment. What a joke! Four trips back to the dealer for the same problem in six months. Finally, I took it to another dealer and he fixed it for $80. Something that regulates the fuel/air mixture kept failing. Now, the problem has started again but I don’t have $80 to throw out the window every time this happens. Polaris claims they make the best products, but I’ll never buy another one. Next time, I’ll buy a Yamaha or a Kawasaki Mule.”

Best Buy

Grasshopper 720K riding mower + 2 more

Paul Friederich, Savanna, Ill. · Vol. 22, No. 6 (1998), p. 15

“We’ve used it three years and put 500 hours on it and the only expenses we’ve had were the regular ones - gas, oil and blades,” says Paul, well pleased with his 1996 Grasshopper 720K riding mower.

One of his all-time best buys is a Farmall 460 tractor he bought in 1963. “It was used as the main tractor around the farm until 1977 and was completely overhauled in 1975. We used a mounted corn picker on the tractor until 1988. It’s still being used on the farm and has about 20,000 hours on it.”

His worst buy was a small Troybuilt rototiller. “It was very hard to control and dangerous to operate. If it hit a deep hard spot, it would jump - even into a fence or onto another row.”

Best Buy

Case 2294 tractor + 1 more

Thomas P. Schultz, Nora Springs, Iowa · Vol. 22, No. 6 (1998), p. 15

Thomas’s best buy is his 1985 Case 2294 tractor. “It’s comfortable to operate and controls are handy to get at. It’s easy to operate and has good vision from the cab. Maintenance on the engine and access to it are easy because of the tilting hood and removable access panels.

“My only complaint is that the 3-pt. hitch does not return to the same position or move up and down in direct relation to the lever movement in the cab. It’s nothing like my Deere utility tractor on which the 3-pt. is easily controlled to the 1/4 in.

“It has plenty of power, too, since the engine has been turned up to 145 hp, the maximum recommended for this engine.”

Thomas is also very satisfied with his 1980 Koyker K-5 front-end loader. “The only repairs have been to the bolts that attach the lift cylinders, hoses and seals.”

Best BuyWorst Buy

Ag-Shield pickup-mounted sprayer equipped + 1 more

Douglas Mosser, Beach, N. Dak. · Vol. 22, No. 6 (1998), p. 15

“I’m able to spray in high winds and haven’t had any trouble with it so far,” says Douglas about his 1995 Ag-Shield pickup-mounted sprayer equipped with manual-fold 60-ft. hooded booms (Ag-Shield Mfg., Box 9, Benito, Manitoba, Canada R0L 0C0; ph 800 561-0132).

“I mounted it on a 1978 Chevy 3/4-ton pickup on which I doubled up the rear springs and added air bags.”

On the negative side, Douglas is disappointed with his 1994 Haybuster 2575 25-ft. no-till drill. “The drill was real heavy and awkward to move. It was a pain to climb around on to fold up. The bearings had to be replaced every 2,500 acres or so and that was labor-intensive. Disc blades had to be replaced at about the same interval.”

Best Buy

Ram 1500 SLT 4-WD pickup equipped + 1 more

Brian Molnar, Kennedy, Sask. · Vol. 22, No. 6 (1998), p. 15

“It’s a beautiful-looking, eye-catching truck and I haven’t lost a drag race with it yet,” says Brian, proud owner of a 1998 Dodge 1500 SLT 4-WD pickup equipped with 5.9-liter engine, extended cab and short box. “It has lots of power, comfortable seats and lots of room in the cab. It gives reasonable gas mileage. I’ve put more than 3,000 miles on it, no problems.”

However, Brian’s less than satisfied with the Goodyear Wrangler AT/S 265-75/16 tires on his pickup. “They’re an all-around good tire but are terrible in water. They have a tendency to hydroplane and I’ve almost hit the ditch twice while hitting a puddle on pavement. I’m going to switch to the Aqua version of these tires.”

Best Buy

Lester Buildings

Ronald Shimanski, Silver Lake, Minn. · Vol. 22, No. 6 (1998), p. 15

A new 36 by 60 by 12-ft. pole machine shed put up by Lester Buildings last November qualifies as one of Ronald’s best buys. “It’s constructed of high quality materials and workmanship. We haven’t had a single problem with it.”

Best Buy

Ram pickup

Lyle Oye, Pipestone, Minn. · Vol. 22, No. 6 (1998), p. 15

Lyle and the board of directors of B&O Trucking had a lot of problems with a 1998 Dodge pickup. They sent letters to not only Dodge officials in Detroit and Minnesota, but copies to the attorney general of South Dakota.

“We haul live cargo, up to 700 lbs. of pigs per load, and we purchased a Dodge pickup because we thought this pickup would be the most reliable and dependable one. What we experienced was a pickup that had so many problems three Dodge dealers couldn’t, or wouldn’t, repair it. More importantly we were treated with total disregard by the Dodge district representative. Problems were finally resolved when we traded for a new 1999 Ford pickup. We’re trying to get compensation for the trade cost. Without it, you can bet we’ll never consider purchasing or recommending a Dodge or Chrysler product again.”

Worst Buy

Ivan has a generic worst buy

Van L. Pfalser, Caney, Kan. · Vol. 22, No. 6 (1998), p. 15

Ivan has a generic worst buy. “When buying electric fence insulators, pass up all the red, white, gray and other pretty-colored ones in favor of the standard black ones.

“It’s a well-known fact that the sun’s ultra-violet light deteriorates any plastic material. The lighter the color, the faster it deteriorates. I have, on a whim, used white and fluorescent red insulators and found that within a year if you hit them with a hammer they’ll fall apart. In contrast, I have some black ones that have been in place for up to 20 years and they’re still as good as the day they were nailed to the post.”

Best Buy

Dixon 3360 riding lawn mower

Harvey Bettenhausen, Beemer, Neb. · Vol. 22, No. 6 (1998), p. 15

“Maneuverability is excellent. It turns on a dime,” says Harvey, happy with his 1995 Dixon 3360 riding lawn mower. “We’ve had no expenses in the three years we’ve had the mower. It’s a wonderful machine. I love it.”

Best Buy

John Deere tractors

John McCrackin, Carson City, Mich. · Vol. 22, No. 6 (1998), p. 15

“We’ve been using Deere tractors for over 40 years and have never had to replace an engine or transmission,” says John who calls his 4640, 4440, 4230’s and 2240 all “best buys”. “They all have between 4,000 and 7,000 virtually trouble-free hours on them. We had to replace the clutch on the 2240 from overuse.

“We have the fuel pump on one 4230 and the 4440 turned up to give us more power, between 120 to 175 hp.”

Best Buy

John Deere 4030

Neal McLeary, Elkton, Md. · Vol. 22, No. 6 (1998), p. 15

Neal’s “very satisfied” with his 1973 Deere 4030, but says the company could have improved the tractor in a few ways too. “It needed a better seat for a smoother ride. It needed better lights for night work and turn signals for safety. A sleeve in the engine recently developed a water leak which led to a rebuilt engine but only after many, many hours.”

Neal added a Deere left hand mirror for road work, halogen lights on the right side to eliminate a blind spot, and a horn.

Best Buy

Ford 9700 tractor

Ronald R. Taylor, Blockton, Iowa · Vol. 22, No. 6 (1998), p. 16

“It’s dependable and reasonably fuel efficient for its age,” says Ronald, pleased with his 1977 Ford 9700 tractor. “Any problems we had have been taken care of in later models.”

He added a set of moveable magnetic rear safety lights for towing wagons. He also built a set of double break-away mirrors for use when he tows his 400-bushel Killbros grain cart. He built a two-arm frame out of 1 1/2-in. sq. tubing and fitted it with commercial round rear views. The frame, which bolts on the top of the cab, adjusts out to the full width of the grain cart with tension springs.

Best BuyWorst Buy

John Deere + 1 more

Dean Ellermeier, Scribner, Neb. · Vol. 22, No. 6 (1998), p. 16

Dean’s pleased with the handling, power, efficiency and durability of his pair of Deere 4630’s, a 1974 and a ‘75 model. But he wishes Deere made a reasonably priced side exhaust kit and add-on front wheel assist for the tractors.

On the negative side, Dean’s unhappy with his 1982 Deere 158 front-end loader. “It isn’t quick-tach and there’s no good way to modify it without cutting it apart, spreading out the arms, and building new mounting brackets. Basically, you’ve got to start all over.”

Best Buy

John Deere 24T small square baler + 2 more

Raymond Larsen, Grinnell, Iowa · Vol. 22, No. 6 (1998), p. 16

Raymond nominates three “best buys”, including a 1960 Deere 24T small square baler. “It’s baled an awful lot of hay every season with very little expense. In my opinion, it’s one of the best pieces of farm equipment Deere ever made.”

Raymond’s also pleased with his 1996 Dodge Dakota pickup equipped with Magnum 6-cyl. engine. “It’s an all-around good serviceable vehicle, with smooth ride and good gas mileage. I’d recommend one to anyone interested in a smaller pickup.”

His third best buy is a 1995 Hydra-Mac 1300 skid steer loader (Hydra-Mac International, 1110 Pennington Ave., Thief River Falls, Minn. 56701; ph 218 681-7130). “We use it for so many jobs around the farm, it’s impossible to name them all.”

Best Buy

Sears Craftsman 18 hp garden tractor

Paul Anderson, Paradise, Texas · Vol. 22, No. 6 (1998), p. 16

“My best buy is my 1987 Sears Craftsman 18 hp garden tractor. I use it to mow my 1 1/2-acre vineyard and figure that over the years I’ve mowed the equivalent of about three miles per week. I built a dozer blade for it which I used to push about 100 tons of dirt that I used as a base for my driveway. My only maintenance has been to replace the starter and a couple of steering shaft bushings. I also had to replace the mandrels on the mower. The company wanted $75 for the main center mandrel and $65 for the two outside ones. I rebuilt them myself for $15 each. I also used 4-in. dia. PVC pipe to build a 10-ft. long weed wiper that mounts on front of the tractor. I use it with Roundup to control johnsongrass.

Best BuyWorst Buy

Ford F-250 pickup + 1 more

Dusty Rhodes, Dayton, Va. · Vol. 22, No. 6 (1998), p. 16

“It has a lot of power, handles and looks good, and has a cab that’s easy to get in and out of,” says Dusty about his “best buy” 1999 Ford F-250 pickup.

His “worst buy” is his New Holland 254 rake-tedder. “It isn’t built with quality. The grease zerks pop out, wheel bearings break out, and the jack stand is wobbly. It’s made cheap and is a disgrace to the company name.”

Best BuyWorst Buy

Valley electric drive center + 1 more

James D. Kurtzhals, Bristow, Ind. · Vol. 22, No. 6 (1998), p. 16

“I like my 1996 Valley electric drive center pivot irrigation system which is designed to cover 130 acres . No problems.”

On the negative side, he’s unhappy with his 1997 DR trimmer/mower equipped with a Tecumseh Vector engine. “The first time I started it the engine poured out blue smoke and wouldn’t run right or run properly on level ground. The mower was sold with a money back guarantee, but when I contacted the manufacturer they insisted that I keep the mower and install a new engine which they sent out. However, the new engine also blows blue smoke and won’t start well or pull properly. The plug fouls, and it burns about one quart of oil for every 1 1/2 gallons of gas. Also, it won’t cut tall grass as advertised. Instead, the grass binds in the head and stalls the cutter. Neither engine was run hot, neither was ever low on oil, and neither was used on steep slopes. All service instructions were followed.”

Best BuyWorst Buy

Rossi tedder + 1 more

Michael Cave, French Lick, Ind. · Vol. 22, No. 6 (1998), p. 16

“My 1997 Rossi 17-ft. tedder works great in thick hay and on uneven ground and is my best buy.

“My 1995 Lely 300 rake tedder is my worst buy. It’s designed to be adjusted up or down by using a center link. However, I couldn’t raise the rake high enough and I also couldn’t turn at the end of the field when it was down. I traded it in for a new 17-ft. pull-type model which works great. However, it should have hydraulic fold wings.”

Best BuyWorst Buy

New Idea 5408 disc mower + 2 more

Michael Leary, Wallkill, N.Y. · Vol. 22, No. 6 (1998), p. 16

Michael nominates his 1998 New Idea 5408 disc mower as his “best buy”. “It’s well built and has blades that can be replaced quickly. No problems and no downtime.

“My 1997 New Idea 4844 round baler is a best buy. It takes less than 10 minutes for routine service, and it has never failed to make bales whether the grass is very short or long. The only condition is that the crop must be dry. I haven’t had to repair anything. I really like the simplicity of design and quiet operation.”

On the “worst buy” side, he lists his 1995 Ford F-250 4-WD pickup equipped with a turbocharged engine. “I’ve had to replace three fan belts, a belt tension pulley, and a water pump, and I’ve had problems with the clutch. I traded it in for a new 1997 model.”

Worst Buy

International Harvester 330 + 1 more

Lawrence Pieper, Burlington, Ky. · Vol. 22, No. 6 (1998), p. 16

“My 1958 International 330 is still running after thousands of hours of use.

“My worst buy is my Deere 170 lawn mower. Three years after I bought it a heat solenoid (a small heat chip) had to be replaced at a cost of $135. After that the mower did not run well. Four years later the transmission went bad which cost me $545. I paid $2,600 for the mower. I could have bought a less expensive mower and replaced it every three or four years.”

Best BuyWorst Buy

Ford 100 1/2-ton 2-WD pickup + 1 more

Larry Kluckner, Longdale, Okla. · Vol. 22, No. 6 (1998), p. 16

Larry’s “best buy” is his 1964 Ford 100 1/2-ton 2-WD pickup. “I bought it one year ago equipped with a Model T flatbed for $500. I couldn’t be happier with it. The 292 cu. in. engine has a lot of power and the transmission and rear end are still solid. I replaced the oil bath air cleaner with a dry one and also installed a new U-joint. I plan to replace a tie rod end”

On the “worst buy” side, he lists his 1989 Chevrolet CK1500 4-WD light duty pickup. “The warranty service provided by my dealer was the only positive thing. At 50,000 miles the engine and radiator had to be replaced and the shifter on the 5-speed transmission had to be repaired. After the extended warranty expired I discovered that the front wheel bearings had to be replaced at a cost of $200 per set. Last summer the thermostat had to be replaced and it turned out to be quite a job. I feel that this pickup is mechanically unsound and built cheap.”