“I wouldn’t recommend the Borzit system to anyone. They promote it for drilling under roads and for digging shallow wells with a 1/2-in. drill and the Borzit tool with its roto coupling. A ball valve on the tool connects to a garden hose to inject lubricating water into the 3/4-in. boring pipe. Once the pilot hole is drilled for a well, you attach a 5-in. reamer to 4-in. casing and follow the pilot hole to water.
“When I first contacted Borzit in the fall of 2017 with questions, they were very helpful. After I ordered the system in early May of 2018, they told me the 5-in. reamer was out of stock. First they said it would be ready to ship by mid-April and then mid-May. After voice mails and emails went unanswered, I contacted FARM SHOW, who contacted Borzit. Then they promised to fill the order.
“Instead, they offered a refund, which I didn’t want. I wanted the reamer to use with their system to drill a 40-ft. well. They offered to send me a competitor’s reamer and then one of theirs when it was available.
“Later that year I started drilling, and the first part went well. I started out drilling in soft dirt, and it literally took longer to add another piece of pipe than it did to bore 6 ft. Until it hit clay. The first layer of clay at a 20-ft. depth was about 12 in. thick. I t took quite a while to get through it. We found if we turned off the water, it went through faster, as the clay expanded when it got wet and clamped to the drill bit.
“We believe we then hit groundwater before hitting a second layer of clay. As it was already wet, we decided to stop there and see if it produced enough water. When I went to try the wedge-shaped reamer to put in a 4-in. well pipe casing, I realized it wouldn’t work with the Borzit system.
“The reamer is supposed to have a narrow end with a hole in it for water to lubricate the hole. The wide end has the connection for the threaded pipe. However, the one they sent me was reversed. It couldn’t follow the pilot hole with the wide end of the wedge.
“I contacted them in early October of 2018 and asked for the reamer they had promised, explaining the problem. No response. In January I copied FARM SHOW on an email to them. That was months ago and still no reamer.
“I gave up hearing from Borzit. In the meantime a friend who is a retired welder looked at the reamer and said, “I can make one of those.”
“We still haven’t finished the 45-ft. well, but hope to do so in May. It has been a learning experience, but other than their roto coupler, the company’s products were a big disappointment.
“That said, I do think the products would have worked well boring a hole under a concrete slab or roadway. It just doesn’t work good for wells.”