John Deere 4720 self-propelled sprayer
“I like the 2005 Deere 4720 self-propelled sprayer I bought used a couple years ago. I use it on about 23,000 acres each year. No downtime, and parts and service are easy to get.”
75 reports from pages 12–15 · 70 Best Buys12 Worst Buys · See everything in this issue at FARM SHOW →
“I like the 2005 Deere 4720 self-propelled sprayer I bought used a couple years ago. I use it on about 23,000 acres each year. No downtime, and parts and service are easy to get.”
Norris is impressed with the hydraulic multiplier he bought from V&M Hydraulics (ph 800 648-6507 or 605 332-4335; www.vandminc.com). It plumbs into your tractor’s existing hydraulic remote outlets. “I use it to operate a bucket-mounted grapple fork on my Case 580 CK backhoe. It was easy to install and has made my backhoe even more useful.”
“My worst buy was a 2007 Jeep Grand Cherokee equipped with a diesel engine. The company’s ads said I could expect to get about 430 miles per tank of fuel, but I was lucky to get 250. The transmission made a high, whiny noise in drive and the windows were always noisy from the wind. Also, the tires made a growling noise whenever I drove on gravel roads. I traded the Jeep in for a Dodge Grand Caravan.”
Photo: FARM SHOWI was skeptical about the new PowerSharp chainsaw sharpening system, by Blount Inc.
Read the whole story →Read more at FARM SHOW →Joe’s impressed with his Holt’s Nut Wizard for harvesting nuts on the ground (ph 912 389-1927; www.holtsnutwizard.biz). “It consists of a rolling wire basket that’s designed to pick nuts and fruit up off the ground. Pushing on a device attached to the handle causes the wires to separate, allowing you to easily dump the fruit into a bucket. It makes gathering nuts an efficient and easy job.
“The Nut Wizard comes in four different sizes that are designed to pick up everything from nuts to seeds, fruits, acorns, balls, apples, oranges, citrus fruits. It’s a fantastic device. I used it on my walnut trees and in my apple orchard. It’s always an ongoing fight between the squirrels and me to see who gets to the walnuts first. With the Nut Wizard, I win.”
Wesley likes the Eel-Trax tracks he mounted on his skid loader (ph 800 404-6978; www.eelriversteel.com). “These tracks are much less expensive than name brand tracks and have allowed me to operate in conditions where I couldn’t go with tires alone. The company is great to deal with and delivered the tracks quickly. For anyone who only needs tracks occasionally, these tracks work well. Great product.”
“In repeated dealings over the past years, E&R Seed has never failed to provide excellent selection, service, quality and price (ph 866 510-3337). The company also carries a vast array of grower and greenhouse supplies. Without question they’re the best mail order company I’ve ever dealt with. I recommend them unconditionally.
“I’m happy with my Yanmar FX28D tractor. After putting on some 1,100 hours with nothing but routine maintenance, this tractor remains quite the little workhorse for a very reasonable price.”
“I own two Honda Rincon 650 4-wheelers, and both were wonderful machines until I had about 1,000 miles on them. But now the automatic transmissions on these machines slip whenever they’re cold. My Honda dealer says the problem is due to a bad O-ring in the transmission, and they want about $400 to repair each machine. Has anyone else had this problem? Why doesn’t Honda recall these machines?”
“It makes good, tight bales that keep their shape and store well,” says Howard about his Deere 567 baler equipped with net wrap. “The net wrap option speeds up baling, conserves fuel, and saves wear and tear on both the baler and tractor. Net-wrapped bales that are stored outdoors also keep much better.”
Small square bales fill a niche in Cook’s forage program. He feeds mostly big round bales to his own stock cows, but he sells most of his hay to farmers, researchers, horse owners, and hobby farmers. They generally prefer small squares.
To reduce labor costs, Cook pulls a Kuhn bale sorter behind his baler. The sorter sorts and drops 8 to 12 bales in a tight package. He uses a hydraulic fork, also made by Kuhn, to lift and stack the bales.
“My Muck Arctic Sports boots are far lighter and warmer than any other boots I’ve ever seen, and the soles are easy to clean off (ph 877 215-6778; www.muckboots.com).
“L.L. Bean makes a down coat covered with waxed cotton that wind can’t penetrate. Nothing compares to this coat’s practicality and warmth. Both the boots and the coat were expensive, but they’re worth it.”
Photo: FARM SHOW“My wife and I make most of our income from two acres of creek bottom where we do intensive market gardening 32 weeks a year.”
Read the whole story →Read more at FARM SHOW →“My best buy is my C-Crane radio (ph 800 522-8863; www.ccrane.com). I had this radio for 10 years when the digital dial on it went bad. I called the company to direct me to someone who could fix it. They told me to send it back and they’d repair it at no charge and also pay for shipping. I couldn’t be more impressed with this company.”
Tom’s happy with his 2005 Yamaha 660 Rhino
4-wheeler. “My wife and I use this machine every day. It pulls full trailer loads of wood and I plow snow with it all winter long. We also use it to pull hay wagons and to haul rocks and dirt for our garden. I keep it well maintained, and as a result it has never let us down.
“My 2008 McCullough 16-in. chainsaw didn’t have enough power to cut through a hard loaf of bread.”
“I like my 1994 Case 1840 skid loader equipped with a Cummins diesel engine. Day in and day out, this loader is dependable and trouble-free. It fits my farm perfectly. I bought it used in 2001 with about 6,000 hours on it, and now it’s pushing 9,000 hours.”
“I needed something to weigh my grain for record reporting. The 2009 Central City Scale weigh scales that I mounted on my Kinze 400 grain cart solved the problem (ph 308 946-3591; www.ccscales.com). Gambier Welding, a local welding shop, removed the cart’s axles and tongue, then welded on the new axle sensors and a tongue sensor. My tractor battery supplies the 12 volts needed to operate the monitor. I’m amazed how accurate these scales are. Last year I bought another scale for my other grain cart.”
“I use my 1986 Deere 650 compact tractor to work my food plot, using implements that I built myself. This tractor doesn’t use any oil, is stingy on fuel, and has plenty of power. I also own four Deere lawn and garden tractors and have had great success with all of them.”
“I like Shark Bite plumbing connectors (ph 800 518-5388; www.sharkbiteplumbing.com). I used them when I had to replace a shower valve in a spot where it would have been difficult to resolder the copper piping. These couplers just slip on the ends of the pipe to connect, and that’s it. Once pushed to the proper depth, you’re done; no extra parts, soldering or tools are required. These connectors are kind of expensive, but the time and trouble you save is well worth it in emergency situations.
“My 2005 Ford F-150 4-WD pickup is my worst buy. At only about 20,000 miles the reverse gear went out, but the 3-year warranty had expired. I’m pretty sure the service manager spewed coffee on his computer screen when I suggested that Ford help with the repair. I live in a remote area of Alaska where the closest dealer is 400 air miles away. I ended up paying for the repair.”
Photo: FARM SHOWShe’s happy with her Burn Right mini incinerator (Burn Right Products; ph 262 227-5727; www.burnrightproducts.com).
Read the whole story →Read more at FARM SHOW →Henry’s satisfied with his Kubota L2800 4-WD loader tractor equipped with a diesel engine. “I use this tractor with a Land Pride 60-in. rototiller and a 60-in. Land Pride bush hog. I only have 50 hours on the tractor, but no problems so far.”
James likes his 2008 Mahindra 2615 4-WD loader tractor equipped with a 3-cyl. diesel engine. “I’ve wanted to purchase a 4-WD compact loader tractor for a long time. I do my homework before buying anything, taking into consideration the price, performance, warranty, durability, comfort and ease of operation. This tractor has come out on top. I’m 100 percent satisfied with it.”
“My 1998 Deere F1145 front-mount mower has about 4,100 hours on it but still starts and runs great. I use it to mow a little more than 5 acres on 2 gal. of diesel fuel. It’s equipped with a front-mount 72-in., 3-blade mower deck. I bought the machine used with about 3,600 hours on it. It’s powered by a 3-cyl. Yanmar diesel engine, which always starts and runs great. I made a bucket loader for the tractor, and also reworked and installed a 60-in. Loftness 2-stage snowblower on it. The machine’s heated cab makes it a pleasure to work with in any winter weather.”
A 2010 TroyBilt weedeater rates as Lyle’s “best buy”. “It starts quick and easy and has plenty of power, and I can use it with attachments such as a brush cutter, pole saw, tiller or leaf blower. The machine has a 4-cycle engine, which eliminates the need to mix gas and oil. And it runs smooth.”
“It starts easy and will run at idle for extended periods of time. Also, it’s very reliable,” says Roger, pleased with his Husqvarna 455 Farm Boss chainsaw.
“My worst buy is my 2004 Husqvarna riding mower. The deck has to be cleaned after every mowing job. Also, the deck shows a lot of wear at the suspension joints -- all the bolt and pin holes are elongated. It’s not a mower you want to use on large lawns.”
Les like his 2004 Kubota 900 RTV. “It’s built rugged. I use it like a dump truck to move dirt on our acreage, filling the box with 3 backhoe buckets full of dirt. Even when the box is heaped up with dirt, the hydraulic cylinder dumps it with ease. Works great for moving topsoil and distributing it over a new lawn.”
“After reading about Kuchar Combine Performance parts in FARM SHOW, I decided to try them. In 2001 I installed a set of Kuchar cylinder filler plates in my Deere 7720 Titan II combine, with excellent results. Cylinder vibration was eliminated and, when harvesting soybeans, there was less dust at the feederhouse.
“In 2009 I installed a new concave in the same combine. But before installation I consulted George Kuchar about modifying the concave for better performance. After doing what he recommended, the results again were excellent. The combine threshes better with less power and grain loss. From now on, any Deere combine I own will be equipped with parts from Kuchar Combine Performance.
“I also installed a poly-slatted feederhouse chain, along with a poly louvered chaffer and sieve, from Harvest Services Ltd. (ph 800 667-2601; www.harvestservicesltd.com). They’re great products. The feederhouse chain uses no. 557 links instead of number 550, but because of the slat design it weighs only half as much. The slats don’t bend, and it drives much easier.
“I definitely feel that between Kuchar Combine Performance and Harvest Services Ltd., I’ve greatly extended the life of my combine.”
“I use my 2004 Deere 585 4-WD garden tractor to mow and to clear snow. No problems. It has a lot of power and, when equipped with chains in the winter, it’s nearly unstoppable.”
“My best buy is my 1948 Ferguson tractor – it still runs well and has required only routine maintenance.
“My 1997 Honda Civic has about 260,000 miles on it but still runs great. It’s reliable and gets 40 mpg. It’s the best car I’ve ever owned. No problems.”
“My 1990 Grasshopper zero turn mower is my best buy. I use it to mow my 1 1/2-acre lawn. It has required only routine maintenance.”
“I use my 2007 Kubota RTV 900 tractor all year long with no problems.
“My New Holland TV140 tractor has had problems from the start. The wheel studs keep breaking, and I’ve had problems with electrical shorts and leaking hydraulic hoses. Now at 2,900 hours the engine has to be replaced.”
Scott’s impressed with his 2004 Dixie Chopper Silver Eagle zero turn riding mower equipped with a 50-in. deck. “I put 50 hours a year on this mower, and my wife and daughters love to use it, too. I’d definitely buy another one, but I don’t think this one will ever wear out.
“My 2008 Mantis rototiller is hard to start and won’t stay running. I’ve adjusted the carburetor according to the operator’s manual and the DVD, but it only runs for about 5 seconds and then dies.”
“In 2009 I received an 18-volt DeWalt compact drill/driver, impact wrench, and heavy-duty reciprocating saw as a Christmas gift. I’ve used these tools to build many different projects. They’re great tools.
“I use my 1989 Long 38 hp tractor for putting up hay and bush hogging. The tractor has only about 900 hours on it, but the engine has already had two complete overhauls, and the block heater has been replaced twice. It was built in Romania.”
“I bought my Massey Ferguson 165 tractor used 40 years ago at an auction. I’m not sure when this tractor was made, but it’s a best buy. All I’ve ever done is to replace some steering parts. Now I’m going to have the tractor painted.”
“In 2006 I bought an Arctic Cat 400 TBX ATV. When we bought our farm a few years ago I thought about buying both a tractor and an ATV. But when I found a tow-behind, self-powered bush hog mower, I decided to spend the money on just an ATV and not on a tractor. And when I found the Arctic Cat TBX I knew I’d found the right ATV.
“While the TBX has handlebars like an ATV, it has a dump bed like a utility vehicle. It has plenty of power to tow the bush hog or a trailer full of gravel, hay or firewood, or even a deer. And, I can go 4-wheeling when I get my chores done. It’s a great machine for both work and fun. With the machine’s storage compartments, I always have the tools I need, and with the big 6-gal. fuel tank I never run out of gas.”
Charles is the satisfied owner of a 1995 Massey Ferguson 261 tractor equipped with a 4-cyl. Perkins diesel engine. “This tractor was made in Poland. I bought it used with low hours. It’s a versatile machine that always starts well and runs great. It has a lot of power and is easy to maintain and repair, even though repairs are rarely needed. The transmission is a simple high and low range 4-speed so there’s really nothing to break or go out on it.”
Larry likes his 2008 Woods 1800 15-ft. batwing mower. “It’s built super heavy, with a smooth deck so trash doesn’t build up on it as badly as on some other models. The blade speed is higher than most other brands and it mulches better, too. Also, I like the optional wheel package – it doubles the number of wheels and they pivot, which results in very little scalping.
“My 2005 Vicon 423T rotary rake does a super job of raking dry hay and makes a nice windrow, but when I try to rake green hay it has no lifting action. As a result, it won’t pick up any hay that has been run over. Also, I’ve had trouble with the tine arms coming loose and cracking. The company made an update to fix the problem, but they made us pay for it. It’s the worst piece of Vicon machinery we’ve owned.”
“In a previous issue I complained about the bad experience I had with my 2004 GMC Sierra pickup equipped with dual wheels and a diesel engine. The engine turbocharger had to be replaced at about 4,000 miles and the pickup was towed in 4 or 5 times due to fuel problems. However, since then things have gotten better. The dealer repaired everything at no cost, and it has turned out to be the best truck I ever owned. I use it to pull a 24-ft. gooseneck livestock trailer.”
“I saw an ad for a lake weed and algae control product called Mother Natures Way. It’s supposed to be biologically safe, using live bacteria to dissolve plant nutrients in order to control aquatic vegetation. The man I talked to said it would clean up my pond for 3 to 5 years at a cost of $150 per year. So I sent him a check for $895 on August 14, 2008. We talked three times and he said he’d call back, but he never did. I had the Better Business Bureau of Illinois send him a letter but he wouldn’t accept it. Now my pond is solid green, and I’d like a refund.”
“A bad storm blew away a building on our farm. All that was left was the concrete slab. I contacted Morton Buildings to put up a new 30 by 40-ft. cattle shed. They checked out the site and said it would be no problem even though the slab was not quite level.
“The building they put up is fine except that there’s an 8-in gap around the bottom on two sides. At the time they finished it I was busy so I just okayed the job and made the final payment. After noticing the gap along the bottom, I contacted the company and they said there was nothing they could do because they had put up everything delivered with our building kit. All it would have taken was another row of boards around the bottom but they couldn’t be bothered. I’m just doing it myself. No more Morton for me.”
“I bought a Wagner Power Painter with 1,800 psi to paint my barn, because after watching the TV commercials I was sure that was the sprayer I needed. I also bought an adapter for it that’s supposed to siphon paint out of a 5-gal. bucket. However, I couldn’t get it to work so I called the company’s toll-free phone number. I got a recorded message that said ‘all lines are busy, please call back another day”. I did call again, three times at 2-day intervals, but I always got the same message. Finally I decided their customer assistance didn’t exist and I didn’t call any more.
“This sprayer worked to a fashion but wouldn’t hold the selected spray pattern. I had to constantly adjust the spray nozzle.”
On the positive side, “Several years ago I bought a used International Harvester 574 tractor equipped with a front-end loader. This tractor works great and always starts. It wants to work all the time. In fact, if the tractor sits idles too long the engine tends to ‘sputter’ for a while. I can live with that. I really like this tractor.”
“My 2005 Kubota Z28 ATR mower works amazingly well. Not only does it mow right through tall, thick grass at low rpm’s, it’ll also cut small saplings like a bush hog. It’s very dependable and fuel-efficient. I use it to mow 8 to 10 acres per week in prime season.”
A 2010 New Holland 6050 front wheel assist loader tractor rates as Larry’s “best buy”. “I like the fact that it doesn’t have much in the way of electronics - just the push button on the powershift transmission and the reverser. It’s a smooth-running, comfortable tractor for its size. So far, so good.”
Ron’s impressed with the QVB Enterprises haybine reverser kit he bought for his MacDon 5020 haybine (ph 306 745-3720; www.qvbenterprises.com). The universal kit allows you to reverse the flow of oil to any haybine by flipping a switch in the tractor cab. Once the machine is plugged you simply shut it off, flip the switch from inside the cab, start it up, and the whole machine reverses.
“It works great and eliminates the need to get off the tractor. Takes only about 15 seconds to unplug everything,” says Theroux.
Gary owns three Deere 4020 diesel tractors and says they’re all “best buys”. His 1966 and 1969 models are equipped with syncromesh transmissions, while his 1970 model has a powershift transmission. “They’re the most complete tractors in every way. I use them to do light-to-heavy work and refer to them as icons. The three tractors have about 16,000 hours between them, with no problems that I couldn’t fix by myself. There’s not a tractor out there that will resell like these models. When new they sold for $7,000 to $8,000, but I can get $15,000 to $20,000 for them today.
“My 1968 Deere 6600 combine equipped with a diesel engine is still the sharpest combine in our area. It’s equipped with a 329 cu. in. diesel engine that’s easy on fuel. I painted the combine to like-new condition in 2007 and applied chip guard over some painted spots to keep the paint from wearing off. The combine is equipped with a 213 flex head and a 4-row corn head that’s set for 38-in. rows. They don’t build combines like this any more, and I like being able to do any repair work that needs to be done. No computers on this machine.”
Donald’s disappointed with his 2009 Poulan Pro chainsaw. “This saw has never run more than two or three minutes without breaking down. I no longer use it because I can’t depend on it to finish the job. I had an earlier model that was just as bad. I’ll never buy a Poulan product again.”
“The 1979 Deutz 30-06 tractor I bought used four years ago is fuel efficient. It runs 3 hrs. on a gallon of diesel fuel when pulling a hay rake, and 1 1/2 to 2 hrs. per gallon when pulling a 6-ft. bush hog or a disk. It always starts right up.
“My 2009 Hobart Handler 187 wire feed welder works great. No problems. It cost a lot less than other name brand welders.
“My 2008 Troybilt Pony CRT rototiller is my worst buy. The counter rotating tines cancel out the drive tires so the machine could hardly move. We sold it and bought a new Troybilt Horse model with forward rotating tines. It works much better.”
Claude’s happy with his Superior Wall foundation system for houses (ph 800 452-9255; www.superiorwalls.com). The foundation uses insulated, precast concrete wall panels that are formed in a factory-controlled setting and delivered to the job site, where the panels are lifted into position with a crane and carefully bolted together and sealed. The walls are custom designed and built to virtually any architectural style, complete with window and door openings.
“This wall system is better than a conventional foundation because it’s less costly, more secure, energy efficient, and drier. It can also be used above ground for whole house construction,” says Reeson.
“My 2006 Deere X485 garden tractor equipped with a 54C deck is my best buy. My wife and I use it to cut about 2 1/2 acres of lawn with no problems. In 2008, we added a no. 47 quick hitch snowblower to the unit. I can move more snow faster and farther with this setup than I can with a 60 hp tractor equipped with a front-end loader and rear-mounted blade.”
Cecil’s had problems with his 2003 Deere L100, 17 hp riding mower equipped with a 42-in. deck. “The deck’s drive belt wouldn’t stay on even when the mower was new. I made three trips to different dealers, but the problem still exists. As a result, I have to raise the deck 1/2 in. higher than I wanted to.
“I also had a problem with the starter. When cranking the engine, at times the starter would bog down and stop. Then I have to turn the engine by hand until compression starts down from top dead center. Eventually the starter got ruined and I had to replace it at my expense.
“After about five years the mower’s seat started cracking and splitting apart.
“On the positive side, the engine has a lot of power and doesn’t use any oil. And there’s plenty of leg room on this mower.”
“My Towner 20-ft. breaking disk is a very heavy machine equipped with a heavy-duty hitch. I welded together a bracket to mount a hydraulic cylinder on the hitch in a vertical position. I attached a ‘foot’ to the end of the cylinder’s push rod. When hooking up to the disk I simply hook up hydraulic hoses to the cylinder and raise or lower the hitch to drawbar height. It eliminates the need to use tongue jacks.”
Lawrence nominates his 1965 Deere 4020 tractor as his “best buy”. “I’ve never had a wrench on the engine nor has it ever been overhauled. A couple of fuel injectors were replaced. It has 5,980 hours on it but still runs good.”
Craig’s impressed with E-Z Set mole traps (ph 888 978-7888; www.easysetmoletrap.com). “I received my first trap in the mail one day just before lunch. I set the trap and when I checked it at 12:30 p.m., it already had a dead mole in it. A friend of mine bought a couple traps, too, so we ‘triple team’ them. That way we increase the odds of catching something and cut out the guesswork of which run to set the trap in. These traps haven’t failed us yet.
“We’ve also had success with Fly-Killer Kover mineral feeders (ph 785 363-2655; www.flykillerkover.com). Our Hereford cattle have had serious pink-eye problems over the years. We bought a few Fly-Killer Kovers and it completely solved the problem. It consists of a 38-in. dia. urethane weathershield, with a 1/4-in. thick polypropylene felt disc bonded to the underside. Mineral in the feeder entices livestock to nose under the cover and thus the face, head area and shoulder contact the insecticide-saturated felt, so they self-treat themselves almost daily.
“It’s available as a complete unit including kover, reservoir, mounting hardware and mineral feeder. Adapter kits are also available for various brands of 3-compartment, poly, mineral feeders.”
“My best buy is Kimball Midwest Paint (ph 800 233-1294; www.kimballmidwest.com). We rebuild tractors and implements and were happily surprised when a young lady came by our shop several years back to demonstrate some spray paint.
“We were absolutely amazed. It covers so well, even an amateur can do professional work. I’ve never seen paint with so much pigment. One can of this paint will cover several times as much area as DeRusto or some of the other big brand name paints, and in a fraction of the time. The gloss colors shine so bright, you may have to wear shades.
“This product comes in gallons or spray cans. They have colors for all the brand name tractors and machinery. The light gray primer covers like a flame thrower, but never runs. It’ll cover so well, you’ll be amazed. This is the best paint I’ve ever used and it’s reasonably priced.
“In freezing cold or rainy weather, when you wouldn’t dare try to paint with a spray gun, we’ve painted entire tractors in our shop with three to four cans of this paint. It does a great job on rusty tractors, implements, trucks, cars, combines, planters, plows, and more.”
“The 1998 New Holland 575 small square baler I bought used three years ago is my best buy. It replaced my 30-year-old IH 430 baler, which was a good machine but lacked the capacity we needed. The New Holland model will eat a huge amount of hay and has a wide pickup to get all the hay in heavy windrows. I read some literature that claims you can make up to 200 bales per hour with this machine. But I can testify that we’ve made 435 bales per hour. I’m sure New Holland will love to hear that.”
“My Deere JS 20, 6.75 hp self-propelled lawn mower is my worst buy. The discharge chute plugs up constantly if the grass is wet or if it’s more than 3 in. tall. It’s poorly designed.”
“I bought my 1945 Gravely walk-behind tractor used back in 1942 and used it to mow grass and brush until 1960. It’s still in use in Montana. I bought a new model in 1960 and that one is still in use in Alberta. No problems with either one. They’re unbeatable.
“I bought my 1956 Massey Ferguson tractor used for $2,500 in 1980. The tractor had been in a barn fire and was reconditioned. I switched it over to 8 volts. I’ve used this tractor for plowing, mowing, and logging work with no problems.”
“This tractor is very maneuverable with good visibility. It’s also inexpensive to operate,” says David about his 1981 International Harvester 186 Hydro equipped with an International Harvester 2450 front-end loader.
“I paid $2,500 for my 1994 Mercury Grand Marquis 9 years ago with about 100,000 miles on it. Now it has more than 250,000 miles. It still has the original engine and rides and drives as good as the day I bought it. I don’t know if Ford made the right decision when they killed off this model.”
A dairy producer with a free-stall barn, Charlie recently told Country Today that he likes his Lely Juno automated feed pusher (www.Lely.com). Lely is a Dutch company, and Knigge is using the unit on a trial basis.
The Juno is a battery-powered unit that automatically drives up and down the feed alley in a barn, sensing the distance to the feed wall and pushing loose feed toward the cows. The owner programs it for direction, distance and time of operation. The 1,500-lb. unit will stop if it hits a person or other solid object.
The unit minimizes feed waste, but also stimulates feeding activity throughout the day and night, which leads to increased production. It keeps fresh feed in front of the cows all day.
“I like my Fluke 175 multimeter (ph 877 766-5412; www.optimumenergy.com). The handheld unit comes with a large, easy-to-read display and is backlit for work in dim areas. A magnetic hanger is available.
“I have several antique farm tractors, and whenever I have electrical problems with them my Fluke meter helps me find out what’s wrong. I use it for all kinds of other electrical problems, too. It sells for less than $250.”
“I mounted a set of Chinese-made Akuret tires on my skid loader last August. We use this skid loader to move round bales and to clean hog pens and do miscellaneous chores around our farm. After only about 20 hours of use, the tires are visibly worn down. My guess is that in another month I’ll have to buy a new set of tires. I bought these tires because I needed a set of tires right away and they were all the dealer had in stock. I should have waited a few days for Titan tires, which are still made in the U.S. I had previously used some Titan tires that lasted about 8 years.”
“My AGCO/Massey Ferguson model 1617 hay tedder is my best buy. I bought it new based on my friend’s experience with an older version. This hydraulic-fold machine is well built and goes down the road without swaying. It’s the perfect size to use with a 10-ft. mower conditioner. It’s built much heavier and better than a Sitrex 520.”
On the “worst buy” side, he lists his DeWalt 4 1/2-in. angle grinder. “I bought this grinder at a special tool sale at the Stanley works factory in New Britain, Conn. Stanley recently merged with Black & Decker/DeWalt. Within the first half hour of use the grinder got hot and made binding sounds, and it would come to almost an instant stop whenever the trigger was released. This is a Chinese-made tool. It’s disappointing to pay extra for an American sold, Chinese-made item that is of substandard quality.”
“I haven’t had any problems with my 2000 Deere 4100 loader tractor – all I do is change the battery and filters. The front-end loader is really useful.
“One of my worst buys was a Deere mulcher and leaf bagger that I bought to use with this tractor. It didn’t fit the tractor at all. A Deere dealer kept the bagger for a full month without fixing it. I’ve had the unit three years but haven’t used it once.”
“The 1977 Versatile 825 tractor I bought last spring is my best buy. This tractor replaced a 1968 Versatile 145 model, which was also a great tractor. Our Versatile 750 and 276 tractors have also been excellent workhorses.
“Our 1993 Dodge 3/4-ton pickup equipped with a diesel engine has about 260,000 miles on it, with no problems.”
A 1987 Ford loader tractor purchased used and equipped with a 3-cyl. diesel engine rates as Douglas’s “best buy”. “This tractor runs great and steers easy even though it doesn’t have power steering. It has plenty of power to operate my Ford brush mower on hilly ground. It also has great brakes and a roomy, comfortable cab. I love this tractor.
“My 2009 Frigidaire upright freezer was so loud you could hear it from one floor above. It turned out the noise was caused by an internal plastic cover sheet/panel that was vibrating. The Frigidaire factory provides a repair kit.”
“I’m well pleased with my 2009 Ford Ranger pickup. It gets about 35 mpg.”
“I bought my Empyre outside wood burning stove with a 20-year warranty. After 4 years, it started leaking its special anti-freeze that sells for about $25 per gallon. I contacted the dealer, who sent out a repairman. He couldn’t fix it. In the meantime, the dealer went out of business so I was referred to another dealer. He came out and looked the situation over, then told me that I was running the stove either too hot or too cold. I contacted the manufacturer but they wouldn’t honor the warranty, as the second dealer had told them there was nothing wrong with my stove and that the problem was due to operator error.
“I know the stove still leaks anti-freeze because I have to keep adding fluid whenever I use it. This company’s warranty isn’t worth the paper it’s written on.”
“My 2006 Chrysler Town and Country van rides nice and is fuel efficient. This is the third one I’ve owned over the years.
“My 1976 Allis Chalmers 185 tractor is economical to operate and has never had a complete overhaul. No problems.”
“I like my Scag commercial zero turn riding mower (www.scag.com). We use it to mow places where we previously used a tractor, and go 12 mph. It has more than 1,000 hrs. on it so far with no problems.”
“We do a lot of small-lot logging on our land, so I bought a Homelite 22-in. chainsaw at Home Depot. It cost only about $200 so I should have known better. After less than one day, it had essentially burned up and wouldn’t run. The brake was locked and it smelled like burning plastic. The local service rep said the saw wasn’t worth repairing so I tossed it on the junk heap. Then I bought my first Stihl chainsaw, and now I own three – 14, 16, and 22-in. models – and they’re all best buys. They start easy, run strong, and are easy to maintain. After two years of use, they aren’t even slowing down at all. I do wish they’d improve the gas and oil caps on these saws, as they’re hard to get tight at times.
“My 2010 Deere 4120 loader tractor is a great machine. I had a Deere 3320 before that was always lugging down and I kept wishing for a bigger machine. The 4120 has plenty of power and a comfortable ride. It’s simply a great tractor.”
Kenneth nominates his 1994 Chevrolet S-10 pickup as his “best buy”. “It has required only routine maintenance and always runs well, even in the coldest weather. The engine and drivetrain are still in great shape. I thought about trading it in for a Chevrolet Colorado, but the S10 is more fuel efficient.”
David uses his 2007 New Holland TC40A 4-WD loader tractor and 6-ft. bush hog to do subcontracting work for developers and lawn maintenance people. “These machines have never let me down. I’ve logged 2,400 hrs. on them at $40 or more per hour, which is a better return on my investment than the stock market. And weeds keep growing no matter what the economy is like.”
“I’m well satisfied with my 2005 Ford F-150 longbed pickup equipped with a 4.6-liter engine. It has more than 113,000 miles on it but has required only routine maintenance. It’ll carry 3,000 lbs. of beans on the highway without swaying. I traded in a 1997 Ford F-150 with about 212,000 miles, and I had never changed the spark plugs, hoses or belts. It still got about 20 mpg on the highway when I traded it.”
“My Monolithic Dome home is a best buy (ph 972 483-7423; www.monolithic.com). It costs only about 30 percent as much to heat and cool as a conventional home. There’s no roof to blow off in a storm, and it’s nearly sound proof. I like the expansive ceilings, too.”
Michael’s impressed with his 2005 Swisher Trail Mower equipped with a 44-in. deck. “By hooking this mower behind my 2008 18 1/2 hp, 42-in. cut Sears Craftsman riding mower I can cut a path 86 in. wide, minus a 6-in. overlap. It makes mowing my five acres of pasture and yard a fast and easy job. The umbrella on top of the machine helps, too.
“Unfortunately, my 2005 10 1/2 hp Swisher Trail Mower is my worst buy. Two years after buying it I had to replace the bearings on one of the spindles, and then just a few months ago I had to replace the bearings on the other spindle. Once I turn this machine off in hot weather it won’t start again unless I let it cool down in the shade for a couple of hours. I thought maybe the coil was bad so I replaced it, but that didn’t help. So now I just leave the machine running until I’m done using it.”