Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 22, No. 5 (1998)

Best & Worst Buys: FARM SHOW Vol. 22, No. 5 (1998)

87 reports from pages 14–17 · 82 Best Buys11 Worst Buys · See everything in this issue at FARM SHOW →

Worst Buy

Champion spark plugs

John G. Ruff, Logan, Kan. · Vol. 22, No. 5 (1998), p. 14

John’s “worst buy” is Champion spark plugs. “I’ve used them for more than 40 years in all my engines with good results, and I always considered them the best spark plugs on the market. No more. I’ll never buy them again.

“I don’t know if the problems started when the company stopped chrome plating their plugs or if they changed their metal alloy. I do know that if you remove the spark plugs regularly, you won’t have any problems. But if the engine is in excellent shape and the plugs don’t have to be removed for several years, you’ll be faced with a very serious problem. The plugs will fuse to the cylinder heads much the way that manifold bolts used to. At best, it’s an extremely difficult job to remove the plugs. At worst, the plugs will break off inside the head.

“I recently had to tell a neighbor that I wouldn’t be able to finish cutting his wheat because I had changed spark plugs on my combine engine and ended up with a plug broken off inside the head. Two of the other plugs are stuck and I have no idea how to get them out. I changed the plugs because I had noticed that one plug was misfiring, and I thought that I’d better replace them all. I’ve never had anything like this happen before and I’ve never been so mad in my life.

“I have no doubt that the problem lies with the metal in the plugs. On the plugs that I did manage to remove, the metal looks like what we used to find in well cooked engine manifolds. I don’t know if the problem is that the company tried to cut costs by switching to a less expensive metal alloy, or if their quality control has slipped since they moved production out of the U.S. However, if you plan to put a set of Champion spark plugs in an engine that’s in excellent shape, you’d better hope that you’ll never have to take them out again because there’s a good chance that you won’t be able to. I also have to replace the spark plugs in several of my other engines -assuming that I can still get them out.”

Best Buy

Case 990

Bruce Ottway, Murray, Ky. · Vol. 22, No. 5 (1998), p. 14

Bruce has had good luck with his 1975 Case 990. “I bought it with only 1,250 hours on it. It’s been very dependable in all ways except one - the brakes grab severely making it somewhat unsafe to drive.

“The only improvement that could be made would be in routine maintenance. The power steering pump has to be removed in order to replace the filter and it has spin-out wheels that do not hold in the position they’re set at.”

Best Buy

Rhino rotary

Harold Neldon, Frazeyburg, Ohio · Vol. 22, No. 5 (1998), p. 14

Harold nominates his Rhino rotary Bush Hog-type mower as his “best buy” (Box 712, Seguin, Texas 78156 ph 210 372-3080). “It’s a heavy duty, 10-ft. wide machine that weighs about 1,800 lbs. I use my Case 830 tractor to pull it. I can use it to mow hay through wet places where a conventional mower conditioner can’t go. I generally cut the hay and let it roll out into a windrow which I bale later. By turning the center gearbox upside down and switching the blades from one side to the other, Another advantage is that I can also use the rig to spread hay. Last spring I used it to spread hay for the first time and it did a beautiful job. I’d recommend it to anyone.”

Best Buy

Case-IH 585

Olen Rowe, Washington Court, Ohio · Vol. 22, No. 5 (1998), p. 14

Olen owns both a 1987 Case-IH 585 with 1,775 hours on it and a 1997 Deere 5200 with 370 hours on it.

“The Deere is very noisy,” he says. “However, I wear hearing protectors whenever I operate either tractor since neither has a cab.”

For night work, extra lighting was added to the Case, while the Deere came with “pretty good” lights, he says. Front weights were also added to both tractors.

Best Buy

PennMulch

Glenwood Springs, Colo. · Vol. 22, No. 5 (1998), p. 14

“Our ‘best buy’ is PennMulch, a product developed by Penn State University to help get grass seed off to a great start (Penn Turf Products, Inc., 149 West Fairmount Ave., State College, Pa. 16801 ph 800 545-7097). It comes in pellet form and is made from recycled newsprint and superabsorbent polymers. It also contains starter fertilizer. First I spread the grass seed over the ground, then I use a commercial spreader to spread the pellets over the seed. Water causes the pellets to expand and cover the seedbed, retaining moisture at the seed level. Another advantage is that the pellets stick to the ground which helps keep the seed from blowing away.

“I like it better than straw because it’s completely weed-free and it eventually disappears so there’s nothing to clean up. Also, the fertilizer it contains is slowly released into the soil. The application rate is 60 to 75 lbs. per 1,000 sq. ft. Comes in 25 and 50-lb. bags. We’d recommend it to anyone.”

Best Buy

New Holland 9482tractor

David L. Brown, Beaver City, Neb. · Vol. 22, No. 5 (1998), p. 14

“This tractor carries on the Versatile tradition of simplicity, ruggedness, durability and ease of maintenance,” says David who is impressed with his 1998 New Holland 9482tractor.“It has excellent power and is easy to drive and service.

“We compared it with other tractors of comparable size and the 9482 seemed the clear winner. Its simplicity of design was the biggest selling point - no maze of electronic bells and whistles on this beauty.”

However, the company could continue to improve ease of shifting, make fewer areas to grease every day and make them more accessible, and the ladder into the cab could be located in a more convenient position, he adds.

Best Buy

International Harvester 1086

Robert Blankespoor, George, Iowa · Vol. 22, No. 5 (1998), p. 14

“Very satisfied” is how Robert feels about his 1981 International 1086. “It’s had the power set at 170 hp since it had 650 hours on it. Now it has 6,000 hours on it and I’ve spent very little in repairs on it. The pto splines went out at 5,000 hours and we put in a new clutch at that point because the tractor was apart. The engine head has never been off and the torque converter, hydraulic pump, hydraulic valves, fuel pump and rear end have never been worked on.

“I only wish the door opened from the other way, like the newer Case-IH Magnums doors do.”

Robert installed a 3-pt. stabilizer on it, which keeps his 12-row mounted planter “right where we put it” (Klingler Mfg. Co., Rt. 1, Box 186A, New Ulm, Minn. 56073; ph 507 354-8735).

Best Buy

Knight 8024 Pro Twin manure spreader

Roger Eberly, Dalton, Ohio · Vol. 22, No. 5 (1998), p. 15

“My 1996 Knight 8024 Pro Twin manure spreader is my best buy. It has a good spreading pattern with all types of materials and tears packed manure apart very well. Before I bought it I tested two other brands. On one model the manure jammed at the discharge point. On the other model, sticky manure stuck on the flat sides. I talked to that company’s territory manager and he told me that I should travel across the corn rows in order to shake the manure down. What a joke!”

Best BuyWorst Buy

Case-IH 4300 field cultivator + 1 more

Chris Hendricks, Franklin, Ind. · Vol. 22, No. 5 (1998), p. 15

“It’s one of the best kept tillage secrets on the market,” says Chris, impressed with his 1998 Case-IH 4300 field cultivator. “We’re able to pull it through weeds and trash which in the past would have required a disk. We pull a five-bar harrow behind the cultivator and make two passes before we plant. It prepares the soil better than anything we’ve ever tried before.”

On the negative side, he lists his 1986 In-ternational 800 planter. “The corn seed drums don’t have enough options for different seed sizes so with small seed it plants doubles or else skips planting the seed entirely. The dealer gave me the wrong monitor, and then when I got the right one it had to be repaired. I didn’t get much help from the dealer, either. Planting depth was inconsistent and the operator’s manual does a poor job of explaining how to calculate the proper air pressure. Overall it was a big disappointment.”

Best Buy

Versatile 876

Jim Jorgenson, Broadview, Mont. · Vol. 22, No. 5 (1998), p. 15

“It has 5,000 trouble-free hours on it,” says Jim, proud owner of a 1987 Versatile 876. “The L-10 Cummins engine is great. It starts well and provides good fuel economy. This is a better tractor than the Steiger Cougar we had before, which had problems with U-joints and hydraulics.

“However, the cab filter could be located in a better position and needs a better mounting system. The dealers are few and far between but the factory is great about answering questions.”

Best BuyWorst Buy

John Deere 4230 + 1 more

Rondel Murray, Carroll, Iowa · Vol. 22, No. 5 (1998), p. 15

Rondel has had few problems with his 1976 Deere 4230. “I like the power shift transmission and cab. It starts well in the coldest weather and offers good fuel economy,” he says. “I only wish I could find a new command arm, like those on the 8000 series Deeres, installed. I hope Deere or someone else comes up with a retrofit kit.”

Rondell added a Buckeye front 3-pt. hitch to his tractor for hauling hay, spraying and blading. He also installed a factory turbocharger to increase torque and improve fuel economy.

Best Buy

Same tractors

Lloyd Schade, Homer, Alaska · Vol. 22, No. 5 (1998), p. 15

Lloyd owns two Same tractors - a 1984 130 and a 1986 85. “They are both 4-WD’s and do a good job handling the slopes and hills we have,” he says. “We’ve had very few repairs even though a number of different young people operate them. There is also enough clearance to use them in the woods logging. The 85 hp tractor has a 3-pt. lever control outside the cab which helps on 1-man hookups.”

Best Buy

John Deere 535 round baler

Joe Chase, Wolsey, S. Dak. · Vol. 22, No. 5 (1998), p. 15

“Our best buy is our 1993 Deere 535 round baler. We’ve used it to make more than 10,000 bales and it still works great. It makes nice, tight, uniform bales. The bale size and amount of twine used can be adjusted easily. Also, the bale monitor lets the operator know which side of the baler needs hay and when the tying has started. We’ve had to replace only two bearings. My only suggestion is that they make the pickup teeth easier to change. Also, the hitch could be built stronger.”

Best BuyWorst Buy

Chevrolet pickup + 1 more

Stu Mayhew, Roseville, Ill. · Vol. 22, No. 5 (1998), p. 15

“My 1997 Chevrolet pickup has more than 44,000 miles and gets 19 mpg. It’s a best buy.

“My worst buy is my 1998 Deere 260 disc mower. I was able to mow only about 7 acres with it before a small disc shaft broke. The dealer came and got it. He returned it two weeks later with a bill for $1,261.40. I tried to read the warranty and the only thing I could see that I did wrong was that I mowed in the daylight. I’m talking to a lawyer.”

Best Buy

AGCO-Allis 9815

James Love, Lime Springs, Iowa · Vol. 22, No. 5 (1998), p. 15

“The one good thing about the tractor is that I only leased it for two years,” says James about his 1997 AGCO-Allis 9815. “It has no power with very weak low end torque. The transmission is so jerky that under load, it almost ejects the driver. The brakes are spongy and you never know whether you’re going to be able to stop when you need to. It has poor fuel economy. The cab style is older than I am, a throwback to Deutz-Allis days.”

Best Buy

John Deere 2755 4-WD

Bob Gamble, Sundre, Alberta · Vol. 22, No. 5 (1998), p. 15

The only problem Bob’s had with his 1991 Deere 2755 4-WD is with bad seals in the steering column. “My last tractor was a Deere 3130 and it had the same type of problem. My dealer fixed them both.”

Otherwise, Bob’s “real happy” with the tractor. “I farm some real wet land and have only got stuck once.”

Best Buy

John Deere 8960 4-WD tractors

Steven Wollmann, Neepawa, Manitoba · Vol. 22, No. 5 (1998), p. 15

Steven says his two 1989 Deere 8960 4-WD tractors are both “best buys”. “We’ve put 6,000 hours on one model and 5,000 on the other one with only a few minor problems, until we had to put a new hydraulic pump on one model at 5,500 hours. I’ve used the tractors to do everything from scraping to chisel plowing to pulling a stoneboat. One complaint I have about all Deere equipment is the operator’s seat. It’s very uncomfortable and I think the company can do better.”

Best Buy

MTD riding mower equipped

David C. Prause, China Spring, Texas · Vol. 22, No. 5 (1998), p. 15

“My 1997 MTD 46-in. riding mower equipped with an 8 1/2 hp Briggs & Stratton gas engine and automatic transmission is my best buy. It came with a 2-year warranty. It’s a good mower and moves along at a good clip. I had a Cub Cadet that cost three times as much and was a piece of junk.”

Best Buy

John Deere Gator

Ralph and Lois Cole, Storm Lake, Iowa · Vol. 22, No. 5 (1998), p. 15

They like their 4 by 2 Deere Gator. “When we bought it our first reaction was, ‘Why didn’t we get one sooner?’,” says Lois. “Health problems made this purchase imperative for Ralph. We use it all the time and will probably have it until our ride in a hearse. This fall wil be Ralph’s 58th year to combine grain.”

Worst Buy

Gehl RB1875 baler

Norman B. Chambliss, Dale, Texas · Vol. 22, No. 5 (1998), p. 15

Norman says his “worst buy” is his 1997 Gehl RB1875 baler. “I’m not dissatisfied as much with the baler as I am with the company and its dealers. My dealer did some warranty-covered work on the baler, but he didn’t have all the parts that he needed to repair it. Three parts had to be shipped in and I had to pay $149.75 in overnight express fees for them. The company’s RB1870 model has some of the same parts found on this model, but the company didn’t have them in stock. Evidently, they don’t require their dealers to stock enough spare parts. Maybe the dealers should cannibalize from the company’s other new balers so that they can keep their customers going. Farmers should be able to order parts through regular channels and not have to pay high overnight express fees.”

Best Buy

Allis-Chalmers 5050 diesel

Robert Hellebuyck, Avoca, Mich. · Vol. 22, No. 5 (1998), p. 15

Robert is pleased with his 1968 Allis-Chalmers 5050 diesel. “It starts easily in even the coldest weather, has plenty of power and is easy on fuel,” he says. “It has many convenient features such as a foot accelerator, easy-to-use flip lever hydraulic hose hook-ups, and spin-out rear wheels that allow you to change tread width.”

However, there is an oil leak between the engine block and transmission and it wasn’t equipped with a tool box or adequate front end weighting, he adds.

“I installed a tool box from Quality Farm & Fleet. It works well and was easy to mount on the fender with an adjustable bracket to fit existing holes. I also added front end weights.”

Best Buy

Mazda 2300 extended cab pickup + 1 more

Stanley J. Davis, Live Oak, Fla. · Vol. 22, No. 5 (1998), p. 15

A 1995 Mazda 2300 extended cab pickup equipped with a 4-cyl. gas engine rates as Stanley’s “best buy”. “I’ve owned several Mazda pickups over the years and have been satisfied with all of them. They handle good, ride well, and have a lot of power for a 4-cyl. engine.

“My 1998 Mazda B4000 extended cab pickup equipped with a 6-cyl. gas engine and automatic transmission is also a best buy. I use it to pull a gooseneck trailer which I use to haul my Allis-Chalmers CA tractor to shows.”

Best Buy

Belarus 310

John H. Poland, Ava, N.Y. · Vol. 22, No. 5 (1998), p. 15

John says his 1994 Belarus 310 is adequate but could use some improvements. “It does what I need it to do and the price savings on everything from fuel to repairs may well work to my advantage,” he says. “But it needs to have the brakes adjusted two or three times during a typical haying season, even though they’re used very little. The injector pump vent leaks fuel. Quality control at the factory would help greatly. Floor plates should have access plates to fill the hydraulic tank. It should have unobstructed routine maintenance plugs. Some thought should have been put into maintenance instead of mass production. Also, someone should have been responsible for making sure all bolts were tightened before it was painted.”

John made an access door for the battery, rebent the arms for hydraulic controls, and made an anti-sway control arm to replace the chain anti-sway system that it came with. He also moved hydraulic parts so they were easily accessible and lengthened one hydraulic control for easier access.

Best Buy

Massey Ferguson 250 diesel

Jason D. Breeding, Palmetto, Ga. · Vol. 22, No. 5 (1998), p. 15

“It needs better gearing,” says Jason about his 1988 Massey Ferguson 250 diesel. “It does not have ideal gearing for many jobs. High range is too high and low range is too low. Power steering is somewhat sluggish, too.”

Nonetheless, he says, the tractor is reasonably reliable and fuel efficient.

Best Buy

Ford 9700

John Luke, Marion, S. Dak. · Vol. 22, No. 5 (1998), p. 15

John’s generally satisfied with his 1977 Ford 9700 but still has a few complaints. “I think the dealer is over-pricing parts,” he says. “We had to put in a new clutch and the dealer’s price was almost twice as much as I got it for elsewhere. The manufacturer should make it easier to get at some parts, such as the pto live shaft.”

Best Buy

Cockshutt 50

Paul Pleskie, Medicine Hat, Alberta · Vol. 22, No. 5 (1998), p. 16

“It has more hours on it than I can count and just won’t quit running,” says Paul about his “best buy” 1950 Cockshutt 50. “It’s simply never let me down.”

He installed power steering and moved the driver’s seat and steering wheel to the right side for easier access and improved visibility. He also converted the electric system to 12 volts for easier starting.

Best Buy

John Deere 6200

Olin Parish, Richwood, Ohio · Vol. 22, No. 5 (1998), p. 16

“We’ve had a few minor problems but the dealer took care of them right away,” says Olin, satisfied owner of a 1996 Deere 6200. “This is the fourth Deere I’ve bought since 1973 and the 6200 has been the best of the bunch.”

Best Buy

Kubota L4150 4-WD

Stephen R. Hill, Chambersberg, Pa. · Vol. 22, No. 5 (1998), p. 16

“In its previous life, it was a rental unit and it was used hard. I figure it has to be pretty good to still be running with relatively few problems,” says Stephen about a mid 1980’s Kubota L4150 4-WD he bought used with 2,200 hours on it.

“The tractor has a good power-to-weight ratio and handles reasonably well for a 4-WD. It does fairly well on fuel but was not built for comfort as the seat sets high and controls are poorly located. It seems to be well constructed which is a blessing because when maintenance is required, there are a lot of parts that have to be removed to get at whatever needs to be fixed. I also seem to have a proliferation of fluid leaks lately, namely the front axle, hydraulics and steering, and I’m not really sure where the leaks are at.”

Best BuyWorst Buy

Woodmizer sawmill + 1 more

William B. Trigg, Fayetteville, Tenn. · Vol. 22, No. 5 (1998), p. 16

“My best buy of all time is my 1993 Woodmizer sawmill. It does everything the company says it will do. I bought it to cut about 150,000 board feet of mixed hardwoods that had been downed by a tornado. I’ve also used it to saw lumber that was used to build several barns and two houses. It’s simple to operate.

“My 1995 4-WD Ford Explorer is my worst buy. It must have been made late on a Friday or early on a Monday. I spent almost as much time getting it repaired as driving it. The fuel metering system is still a problem even though the computer card has been replaced twice. The clutch and brakes have required extensive work as have the electric windows, and the windshield was made faulty and cracked. On the other hand I like myFord F-250 4-WD pickup as much as any vehicle I’ve ever had.”

Best Buy

Ford tractors

Edward L. Tomlinson, Marion, Va. · Vol. 22, No. 5 (1998), p. 16

“We’re pleased with our two 1998 Ford tractors - a 4630 turbocharged model and a 3930. The 4630 runs quieter and has a bit more power. We use these tractors mainly to handle 1,100-lb. round bales and for mowing. They both run nice and handle well.”

Worst Buy

Iko asphalt shingles

James Warntjes, Sheldon, Iowa · Vol. 22, No. 5 (1998), p. 16

“My worst buy is Iko asphalt shingles which I bought from Menards. When the contractor came to lay them, many of them were stuck together and tore as we separated them. I got no help from either Iko or Menards. They wouldn’t reimburse us for our time or trouble.”

Best Buy

Ford 8N

Alton Eliason, Northford, Conn. · Vol. 22, No. 5 (1998), p. 16

“It’s the greatest tractor ever built,” says Alton about his 1952 Ford 8N. “The only improvement that could possibly be made is to install power steering, which they didn’t even have on tractors in those days. I ordered a Sherman up-down transmission for the tractor so I’d have a creeper gear for tiling.”

Best Buy

John Deere 4240

James Skelton, Wauneta, Neb. · Vol. 22, No. 5 (1998), p. 16

James has had good luck with his 1980 Deere 4240. “It’s pretty dependable and parts are still generally readily available. It performs well and has lasted a long time. In fact, it still has the original starter, which turns it over easily even in cold weather.”

On the other hand, fuel economy leaves something to be desired, he says. Likewise, the manufacturer should have used the same fuel pump it used on the 4440, which he feels is superior to the one used on the 4240.

Worst Buy

Chevrolet S-10 Blazer

Gary Gollehon, Brady, Mont · Vol. 22, No. 5 (1998), p. 16

Gary says his 1995 Chevrolet S-10 Blazer is his “worst buy”. “It has a 10-in. long rip in the sheet metal down the left front fender next to the hood hinge. The company says it won’t pay for the repair. They should start using different beer cans to make their fenders. Another problem is that the rear window squeaks un-mercifully on gravel roads because the latch is wearing out. The only way to replace it is to order a complete new rear window, at my expense.”

Best Buy

Allis-Chalmers 185

Gerald Burmeister, Cosmos, Minn. · Vol. 22, No. 5 (1998), p. 16

“The only problem in 2,500 hours of operation was a broken brake rod,” says Gerald, pleased with his 1972 Allis-Chalmers 185. “It’s an excellent tractor for a small acreage like mine.”

Gerald added hydraulic outlets on the front of the tractor for operating a front end loader. “This eliminated hoses running across the operator’s platform. They were a tripping hazard and interfered with normal clutch operation.”

Best Buy

Case-IH Steiger 9350 equipped

Murray Huff, Edmonton, Alberta · Vol. 22, No. 5 (1998), p. 16

“It’s reliable, very solid-built, and components are easily accessible for inspection,” says Murray about his 1995 Case-IH “Steiger” 9350 equipped with Cummins L/O engine and standard Synchromesh transmission.

“The transmission is fuel efficient and I anticipate reliability for many years to come. I wouldn’t hesitate to buy another one providing the price remains competitive.

“However, the company could improve a few things.

“They should improve the plastic they use in the heating and air conditioning system. The fan in my tractor self-destructed and air directional louvers break like toothpicks. The door lock should also be designed so the operator cannot be accidentally locked inside the cab. The latch will not work inside or outside when the lock cylinder is turned to lock.”

Murray says he’s considering purchasing additional weights to improve traction, the tractor’s most limiting feature. He’d also like to tighten up the “slop” in the sliding stub hitch-type drawbar because the extra movement up and down causes wear and tear on all parts.

Best BuyWorst Buy

Black+Decker drills + 2 more

Thomas Childress, Laurens, S.C. · Vol. 22, No. 5 (1998), p. 16

“My worst buys are two Black & Decker 3.7-in. drills. They look good but don’t work.

“My 1987 Ford Ranger is neither a best nor a worst buy. It’s a good pickup, but I’ve had to have it towed in several times. The problem is that the coil goes dead and has to be replaced. Another problem is that the brake discs are too light and warp, causing a pulsating effect when they’re applied.

“My best buy is my 1993 Mercury Grand Marquis LS car. I had to replace a set of electric wires for $126. Otherwise, no problems. It gets 25 mpg and has a comfortable ride.”

Best Buy

Stihl FS 40 string trimmer

Jerry Westphal, Williamsburg, Iowa · Vol. 22, No. 5 (1998), p. 16

Jerry nominates his 1994 Stihl FS 40 string trimmer as his “best buy”. “We use it to clear weeds from around electric fences. We also use it to trim our yard and to cut brush. Before we bought it we used a competitor’s string trimmer that didn’t last even one year. This one has lasted 4 1/2 years and is still going strong.”

Best Buy

Kubota 4030

H. Booker Bunn, Woodlawn, Va. · Vol. 22, No. 5 (1998), p. 16

Booker’s pleased with his 1994 Kubota 4030, the second Kubota tractor he’s owned. “Both have been super good tractors for us,” he says. “If we were in the market for another tractor, it would be a Kubota. We can’t think of a thing the company could change to improve them.”

Best Buy

Ford Versatile 946

Don T. Kirby, Lamont, Ok. · Vol. 22, No. 5 (1998), p. 16

“The only complaint I have is that the fuel gauge didn’t last,” says Don, pleased owner of a 1991 Ford Versatile 946. “It’s one of three we own and none has ever gone back to the dealer for repairs. They’re easy to work on and most parts can be obtained at truck parts stores.”

Don added tinted windows to keep the cab cooler. He also installed a Filtration Solutions oil filter system (418 South Kansas Ave., Olathe, Kan. 66061; ph 913 829-9056). “It retails for $450 but it cleans oil better and eliminates a lot of oil changes. Instead of changing oil, you send in a sample and the company analyzes it.”

Best Buy

Agco Allis 9655 tractor + 2 more

Chris Dukelow, Abbotsford, Wis. · Vol. 22, No. 5 (1998), p. 16

“We’ve put more than 500 hours on it without any problems,” says Chris, happy with his 1997 Agco Allis 9655 tractor. “The cab is roomy, comfortable, and has a good view, and the Buddy seat comes in handy for riders. The full 18-speed powershift transmission is smooth and easy to use. We’ve always had good luck with our Allis tractors and it looks like it’ll continue with the new models.”

On the minus side is his 1995 Hands All Purpose 2600 manure spreader. “It pulls hard and is supposed to be able to handle any kind of manure. However, it shoots liquid manure back at the tractor, and it takes forever to spread bedding-packed manure. My arm gets sore from controlling the hydraulic lever that operates the augers because I have to move it forward and backward all the time. We traded it for a new Knight 8024 spreader which we like.”

Best Buy

John Deere 8100

Lloyd Bohl, Grant Park, Ill. · Vol. 22, No. 5 (1998), p. 16

Lloyd says his 1996 Deere 8100 with MFWD has a long way to go before it’ll compare to the 1994 Deere 7800 with powershift transmission he traded for it.

“The transmission on the 8100 hesitates between gears. It shifts jerky. The 7800 had more power. The dealer has worked on it but it still doesn’t perform as well as the 7800. It seems doggy on top end pulling.”

Best Buy

Ford F-350 crew cab 4-wd

Larry Otta, McCallsburg, Iowa · Vol. 22, No. 5 (1998), p. 16

“It has a lot of power and starts right up in cold weather,” says Larry about his 1996 Ford F-350 crew cab 4-WD pickup equipped with a Power Stroke engine and automatic transmission. “It rides good for a 1-ton pickup. Fuel economy is okay.”

Best Buy

Case 770 diesel + 1 more

Tom Stenberg, Volga, S. Dak. · Vol. 22, No. 5 (1998), p. 16

Tom’s the owner of a “best buy” 1968 Case 770 diesel. “It’s needed very few repairs, is fuel efficient, easy to service and is just the right size for mowing, raking, and baling hay as well as hauling manure,” he says. “I also have a Case-IH 5130 tractor that I use for loader work. The shuttle shift on the steering column is very handy but I have only 3,600 hours on it and already have had to replace the front wheel seals.”

Best Buy

Belarus 925 4-WD equipped

Franklin A. Robinson, Benedict, Md. · Vol. 22, No. 5 (1998), p. 16

“This tractor is used nearly every day, along with five other tractors,” says Franklin about his 1994 Belarus 925 4-WD equipped with cab and air conditioning. “It’s developed several minor oil leaks and seeps, so seals could have been improved. The best thing about it is that the price was less than half that of a Deere or Case-IH.”

Best BuyWorst Buy

John Deere 455 hydra-push manure spreader + 1 more

Jesse O. Pomeroy, Londonderry, Vt. · Vol. 22, No. 5 (1998), p. 17

Jesse’s impressed with his Deere 455 Hydra-Push manure spreader. “It doesn’t have a bed chain which makes it much easier to use in cold weather than a conventional box spreader. I have to make sure that the box is cleaned out completely in temperatures below zero, but that’s easier than having to repair a broken bed chain. Also, it does a much more even job of spreading sloppy manure than a conventional spreader and will continue to spread sloppy manure when going downhill. It spreads dry pen-packed manure much better than the Knight Slinger spreader that I had been using. I like it because it eliminates the need to have two kinds of spreaders - one for liquid manure and one for pen-packed manure.”

On the “worst buy” side, he lists a fly control program for dairy farms offered by Orkin. “Under the program, the company regularly sprays your barn and/or parlor throughout the fly season. The first year it seemed to work alright, but the second year I think they were just spraying water for all the good it did. They had a so-called guarantee that if you weren’t satisfied they’d come back and spray for free.

“After the seçond time they came during the second year - with no obvious effect on the fly population - I called and complained. They never came out again. The next year they called to sign me up for the season and seemed shocked when I told them ‘no’, or something to that effect.”

Best Buy

John Deere 4650 except

Larry D. Ruffner, Vermontville, Mich. · Vol. 22, No. 5 (1998), p. 17

Larry likes everything about his 1985 Deere 4650 except the transmission. “It’s a quad-range transmission and I know why they call them ‘rip shift transmissions’. The two levers are hard to get out of park even when the correct procedure is followed. Unfamiliar drivers have a hard time getting the tractor out of park, thus stalling the engine. The company should offer and install an updated system for these hard-shifting quad ranges. They could also include a swivel seat for better rear visibility. Also, the air filter element is hard to remove because of its location.”

Best Buy

Farmall Cub

Everett W. Gustafson, Brockway, Pa. · Vol. 22, No. 5 (1998), p. 17

“It’s served both my father and myself well for 50 years,” says Everett about his 1948 Farmall Cub. “It had a new clutch, rings and brake linings in the 1980’s but is still running strong. It’s been stored inside and the original paint has only needed touching up.

“I made a step for it so I could climb into the driver’s seat easier.”

Best Buy

Massey Ferguson 3650 4-WD

Marvin R. Skaug, Fertile, Minn. · Vol. 22, No. 5 (1998), p. 17

“They built power, comfort, handling, fuel economy, durability and ease of maintenance into this tractor,” says Marvin, pleased with his 1990 Massey Ferguson 3650 4-WD. “We purchased it used with 2,700 hours on it. The hired help all want to operate this tractor.”

Best Buy

Brian Skipper

Dan Mannel, Jefferson, Iowa · Vol. 22, No. 5 (1998), p. 17

“I nominate an add-on chopper kit made by Brian Skipper for International Axial Flow combines as my best buy (Brian Skipper, 4371 Gleeson Line, Rt. 1, Tilbury, Ontario, Canada N0P 2L0 ph 519 682-3645). Using sickle sections to cut really helps when you have to go through tough, green soybean straw. They cut the straw up much finer than the combine’s original sections. Also, they’re reasonably priced.”

Best Buy

John Deere 4010 diesel

Larry Bakke, Estelline, S. Dak. · Vol. 22, No. 5 (1998), p. 17

Larry has “sentimental ties” to his 1962 Deere 4010 diesel. “Our neighbor bought it new when I was eight,” he says. “He died and I bought it in 1984. This tractor was built with much thought and has stood the test of time. It’s a good universal tractor for many jobs.

“I put a Lundeen cab on it and like it well because of the good visibility and sliding doors.”

Best Buy

Allis-Chalmers 7010

Chuck Leisy, Alliance, Neb. · Vol. 22, No. 5 (1998), p. 17

“It’s the best tractor I ever owned,” says Chuck about his 1980 Allis-Chalmers 7010. “It has 3,610 hours on it and has required only minor repairs. It offers excellent fuel economy. It’s well-built and handles well. It requires very little maintenance. We had a 1980 7045 that was just as good.”

His only complaint: “The cab could have been a little larger.”

Best Buy

Sears Craftsman 12-volt cordless drill + 2 more

Brent Griggs, Piedmont, Mo. · Vol. 22, No. 5 (1998), p. 17

Brent likes his Sears Craftsman 12-volt cordless drill. “It’s unbelievable how handy it is. It saves a lot of trips to the garage. It has enough power that I can use it for a long time.

“My Sears Craftsman 30-gal. 5 hp compressor does a fine job of supplying air without having to work very hard.

“MyDeWalt chop saw can cut through any kind of steel. It’s built tough.”

Best Buy

International Harvester Farmall 656

Don Welter, Ashland, Ohio · Vol. 22, No. 5 (1998), p. 17

Don’s the pleased owner of a couple old gassers - a 1970 IH Farmall 656 and a 1957 IH 450. “We purchased the 656 in 1988 with 5,000 hours on the original engine,” he says. We’ve had the 450 for two and a-half years and it’s been a good old workhorse considering it’s 40 years old. Granted, fuel economy is lower than comparable diesel units, but we use them both in cold weather and have had none of the major problems that can plague diesels.”

Don replaced the original 15.5 by 38 in. rear tires on the 656 with 16.9 by 38-in. tires for a better gear ratio in second gear for plowing on his rolling ground.

Best Buy

Massey Ferguson 1080 diesel

David Ellis, Breton, Alberta · Vol. 22, No. 5 (1998), p. 17

“It’s extremely easy on fuel, puts out 86 hp (pto), and has good traction so it seldom gets stuck,” says David about his 1970’s Massey Ferguson 1080 diesel. “The differential is a bit noisy and the air conditioning could be better. But the good points still outweigh these two minor problems.”

Best Buy

Chevrolet C2500 3/4-ton pickup equipped + 1 more

James C. Sponsler, Princeville, Ill. · Vol. 22, No. 5 (1998), p. 17

“My 1992 Chevrolet C2500 3/4-ton pickup equipped with a 6.5-liter turbocharged diesel engine has been virtually trouble-free and is a best buy. I have more than 90,000 miles on it. It has great pulling power for my goose-neck trailers and is much more fuel efficient than any of my previous gas engine-powered pickups. It’s by far the best all-around pickup I’ve ever owned.

“My 1997 MTD 21-in. push mower, equipped with a Briggs & Stratton 3 3/4 hp engine, is my worst buy. I’ve been generally well satisfied with the mower but have had a lot of problems with the starter recoil spring assembly. The clutch hub was made of plastic and wore out, which kept the rope from retracting. We finally replaced the plastic part with a new one made of metal, which seems to have solved the problem.”

Best Buy

International Harvester M diesel

Jon Wickham, Cutchogue, N.Y. · Vol. 22, No. 5 (1998), p. 17

“This tractor is over 40 years old and we still use it hard every day,” says Jon about a 1947 IH M diesel that’s one of his all-time best buys. “It costs very little to maintain since it doesn’t have such frills as power steering, heating, air conditioning, torque amplifier, and 4-valve pto. Its simple structural design and slow engine speed have helped these tractors last many years.”

Jon added a Gresen hydraulic valve block, an on/off open assembly of three spools, to modernize the hydraulic system (Surplus Center, 1015 West O Street, Lincoln, Neb. 68528; ph 800 488-3407).

He also dropped the front axle and installed short, wide 14.9 by 28-in. flotation tires to make it more suitable for orchard work.

Best Buy

Sears router

Howard Vogel, Waverly, Iowa · Vol. 22, No. 5 (1998), p. 17

“I like my 1997Sears router. It’s equipped with a plunge release on the handle and a speed control and on-off switch. There’s also a chuck lock for changing bits.”

Best Buy

Kubota L2550 4-WD equipped

Levan Yergy, Jacksonville, Fla. · Vol. 22, No. 5 (1998), p. 17

“It’s a good tractor and came with all the attachments to suit our needs,” says Levan, happy with a 1993 Kubota L2550 4-WD equipped with turf tires. “We bought it slightly used but it came with a LA400 Kubota removable front-end loader, a Rhino FM60 finish mower, a Bush Hog RTS 62 rototiller, Woods rake, leveling blade and roller.”

Best Buy

Case 4490

Jim Larson, Geneseo, Ill. · Vol. 22, No. 5 (1998), p. 17

Jim likes his no-frills 1983 Case 4490. “We weren’t looking for anything fancy, just good economical horsepower and it hasn’t let us down on that score. It’s been trouble-free,” says Jim. “However, improved visibility would be a plus because you can’t see the drawbar from the cab. Also, it could use more gears in the transmission.”

Best Buy

Massey Ferguson 245

Jim Schroeder, Bend Ore. · Vol. 22, No. 5 (1998), p. 17

Jim says his 1977 Massey Ferguson 245 is a great orchard tractor. “The disc brakes are great, the hydrostatic steering makes it a dream to handle, and the suspension seat is comfortable,” he says. “It’s economical to operate, easy to maintain, and we’ve had few troubles with it.”

However, he adds, it would be nice to have more than eight forward gears and two reverse gears, although the multi-power transmission was a good transmission.

To make the tractor more useful, Jim added both Cat. I and II stub arms to the 3-pt.

Best Buy

Ford 4000

John Schwarzkopf, Chehalis, Wash. · Vol. 22, No. 5 (1998), p. 17

“It has plenty of power for its size and the Select-O-Matic transmission is ideal for loader and tillage work,” says John, pleased with his 1971 Ford 4000. “My tractor is the gas-powered model, so fuel economy could be better, especially when I’m working it hard pulling a 60-in. tiller in clay soil. Also, the Select-O-Matic transmission is hard to work on and expensive to repair.”

Best Buy

Case-IH 2166 combine

Jim Emerson, Trempealeau, Wis. · Vol. 22, No. 5 (1998), p. 17

Jim’s the satisfied owner of a 1997 Case-IH 2166 combine. “It has plenty of capacity for six 30-in. rows and gives a great grain sample in the tank,” he says. “I’m also quite impressed by the accuracy of the GPS yield monitor. Makes record-keeping and mapping of individual farms very convenient.”

Best Buy

Toyota Corolla

J.P. Benn, Swift Current, Sask. · Vol. 22, No. 5 (1998), p. 17

“I had very good service right up until the time the company closed my local dealership,” says J.P. about his 1995 Toyota Corolla. “Now, parts service is terrible. I’ve been waiting three weeks for an air filter from only three hours out of Swift Current.”

Best Buy

His “best buy” is a 500-gal

Enoch Aarrestad, Debden, Sask. · Vol. 22, No. 5 (1998), p. 17

His “best buy” is a 500-gal. liquid fertilizer “band wagon” that he built himself using the axle and wheels off an International 91 self-propelled combine. He pulls the “band wagon” behind his Case 1070 2-WD tractor and ahead of his 12-ft. wide Haybuster grain drill. He uses it to dribble band liquid fertilizer between the drill’s opening discs and packer wheels. A ground-driven John Blue liquid metering pump, equipped with a hydraulic clutch, delivers the fertilizer through hoses back to the drill. A hitch on back of the wagon is used to pull the drill.

“I use it on all my crops including oats, canola, peas, and barley,” says Aarrestad. “It works great because it places fertilizer to the side of the seed so I don’t have to worry about burning the seed. I used it for the first time this year and, despite a dry spring and high rates of fertilizer, had no problems. Pulling the wagon between the tractor and drill keeps it out of the way when filling the drill with seed. I also use it when seeding alfalfa. I pull a roller behind the drill in order to smoothen out the seedbed.

“I paid less than $400 for steel, $1,900 for the pump, $550 for the tank, and $150 for miscellaneous items. I also paid $800 for a new distribution kit. My total cost was less than $4,000.”

He used 3-in. sq., 1/4-in. thick tubing to build the frame and mounted the tank and pump on it. The pump is driven off one side of the combine axle.