Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 23, No. 2 (1999)

Best & Worst Buys: FARM SHOW Vol. 23, No. 2 (1999)

58 reports from pages 14–16 · 55 Best Buys17 Worst Buys · See everything in this issue at FARM SHOW →

Worst Buy

John Deere 7600

Don Walkenhorst, Ogallala, Neb. · Vol. 23, No. 2 (1999), p. 14

Don has had problems with the air conditioning in his 1994 Deere 7600 that he bought new.

“The cold air comes out below your knees in front and the air return is located behind the seat so it keeps your knees nice and cool, but the rest of your body swelters on a hot day. I tell other farmers who’ve complained about the same problem in their 7600’s that they just don’t know how to operate it: On hot days, you’ve got to quit work by noon to keep from roasting.

“I complained about the air conditioning problem right away and the dealer and the company fooled around with it for two years without correcting the situation. So I sued Deere but the judge threw the case out of court.

“The real problem is I’m stuck with the tractor because nobody around here is willing to take it in trade since the air conditioning problem seems to be common in all these tractors.

“In frustration, I put an old ‘swamp’ water cooler off a Minneapolis-Moline tractor on top of the cab just to attract attention to the situation.”

Best Buy

Agri Metal

Gordon Van Alstine, Cherry Valley, N.Y. · Vol. 23, No. 2 (1999), p. 14

Two of Gordon’s “best buys” come fromAgri Metal (Agri Metal Inc., 1006 Rue Principal, Wickham, Quebec, Canada J0C 1S0).

“My self-propelled 5 hp 1997 Agri Metal 30-bu. feed cart sure beats the small push cart we used before. It features front-wheel steering, which lets me turn on a dime in even the tightest of corners. It unloads both haylage and corn silage quickly and has been trouble-free.

“Agri Metal’s bedding chopper does an excellent job shredding baled hay and straw and pushes easily over rough surfaces. We had another chopper before that didn’t shred bales nearly as well. The Agri Metal chopper has more knives and more air flow so it blows hay and straw further than other rigs, too. A neighbor says his Agri Metal chopper also works well for chopping newspaper for bedding.”

Best Buy

John Deere 7400 equipped

Donald Olayer, Beaver Falls, Pa. · Vol. 23, No. 2 (1999), p. 14

“The more I use it, the more I like it,” says Donald about his new Deere 7400 equipped with MFWD. “It has plenty of power. I really like the Power Quad transmission. The cab is exceptionally quiet. In my book, this tractor could become as popular as the 4020.”

Best Buy

Yamaha Kodiak ATV

Debo Jacks, Mountville, S.C. · Vol. 23, No. 2 (1999), p. 14

“I’ll never buy another product from this company,” says Debo who’s had bad luck with his 1994 Yamaha Kodiak ATV. “It won’t start in cold weather with the electric start; you have to use the pull rope. I took it back to the dealer when it was still new and they adjusted a few things and installed hotter spark plugs, but it didn’t help. When I called the dealer again, he told me all Yamahas have the same problem. Even with a new battery, it seems like it takes all the power to just to turn it over with none left to fire it off. I’m also on the third set of front end bearings.”

Best Buy

Ram pickup equipped

Robert A. Johnson, Canyon, Texas · Vol. 23, No. 2 (1999), p. 14

Robert’s pleased with his 1993 Dodge pickup equipped with a 250 cu. in. Cummins diesel.

“I bought it with 266,000 miles on it. It now has 290,000 and it’s needed nothing except routine maintenance. It pulls a heavy trailer everywhere I need it to. I’ve never had a pickup as good and solid as this.”

Best BuyWorst Buy

Agri-Speed quick-hitch hook-ups + 1 more

Jared Metzger, Steen, Minn. · Vol. 23, No. 2 (1999), p. 14

Jared likes the four sets of Agri-Speed “quick-hitch” hook-ups he’s purchased for his tractors, choppers and wagons (Bergman Mfg., Box 82, Arthur, Iowa 51431; ph 800 551-4554).

“They’re the greatest thing since sliced bread for hauling silage or pulling hayracks,” he says. “You simply back up to the wagon hitch and they hook up by themselves. Then you pull a cable from the tractor seat to lock them. They save a lot of time and are very strong and durable.”

On the negative side, he’s unhappy with his 1994 Case-IH 496 25-ft. disk. “We’ve replaced bearings in this disk every year we’ve owned it and they just keep failing. Our old Deere 230 disk is 20 plus years old and we haven’t had to replace a single bearing yet.

“Another thing I don’t like about the disk is that it leaves ridges throughout the field no matter how many times you try to level the disk.”

Best BuyWorst Buy

New Idea 4844 round baler + 1 more

Robert M. Corbin, Finksburg, Md. · Vol. 23, No. 2 (1999), p. 14

Robert’s much happier with his 1998 New Idea 4844 round baler than he was with the Deere 430 baler he had before.

“The hydraulic pump on the Deere wouldn’t operate at anything less than maximum rpm’s. It was such a heavy machine it required a 70 hp tractor to pull it to make a 4 by 4-ft. bale. It wouldn’t work properly in dry or damp conditions. The ‘Bale Command’ electronics also didn’t work well.

“On the other hand, the New Idea requires little horsepower. The bales it produces are consistently the same size and weight. It’s a lightweight, compact machine and the electronic bale wrap feature works well.”

Best Buy

CountrySide corn-burning stove

Jerome Kline, Brooklyn, Iowa · Vol. 23, No. 2 (1999), p. 14

“My ‘best buy’ is my CountrySide corn-burning stove,” says Jerome (American Energy Systems Inc., 50 Academy Lane, Hutchinson, Minn. 55350; ph 800 495-3196 or 320 587-6565). “It’s easy and economical to operate. I burn a renewable energy fuel - corn, which I have plenty of. I use less than a bushel a day to heat my 1,100 sq. ft. home during a typical heating season.”

Best Buy

Massey Ferguson 8570 rotary combine

Bruce Louden, Kalispell, Mont. · Vol. 23, No. 2 (1999), p. 14

“I bought it new and ran it between 700 and 900 acres for the past three seasons with hardly any trouble at all,” says Bruce, happy with his 1994 Massey Ferguson 8570 rotary combine. “It has a lot of capacity, does an excellent job cleaning grain and saves a lot of grain. It has only needed minor repairs, such as repairing two bearings and a couple of hydraulic leaks. Also, the rotating fan screen was replaced under warranty.”

Best BuyWorst Buy

Case 970 demo tractor + 1 more

Dale Nixon, Stetler, Alberta · Vol. 23, No. 2 (1999), p. 15

Dale’s all-time “best buy” was a 1971 Case 970 demo tractor he purchased in 1974. “It still runs great and has approximately 13,000 hours on it. The original engine has never been touched.”

On the negative side, a 1979 Case 2290 was one of Dale’s worst buys ever. “The tractor is grossly overpowered for its transmission and rear end. We spent nearly $18,000 to fix it but it isn’t right.”

Best Buy

Tubeline 500 bale wrapper + 1 more

Alan Lucas, Marion, Mich. · Vol. 23, No. 2 (1999), p. 15

Alan nominates his 1997 Tubeline 500 bale wrapper as a “best buy” (R.R. 3, Listowel, Ont., Canada N4W 3G8; ph 519 291-4162). “The Tubeline lets us bale hay from 30 to 70 percent moisture. The feed is excellent and the cost is low. It’s fast to load and easy and convenient to feed from.”

A 1996 Highline 1400 bale hauler is another of Alan’s “best buys” (Box 307, Vonda, Sask., Canada S0K 4N0; ph 306 258-2233). “This bale hauler, which I pull behind my Deere 4630, holds sixteen 4 by 5-ft. bales averaging 1,800 lbs. I can pick up a load of bales in five to 10 minutes and unload them in two minutes or less.

“The only complaint I have is that it’s too wide for our back roads. I plan to cut 2 ft. out of the middle so it’s more ‘street legal.’”

Best Buy

International Harvester 800 Cyclo Early riser 12-row

Frank Dougema, Shelbyville, Mich. · Vol. 23, No. 2 (1999), p. 15

“Our 1985 International 800 Cyclo Early Riser 12-row (30-in.) planter has performed very well since it was new,” says Frank. “It produces a uniform stand in both conventional and no-till situations.

“However, we no longer use the seed monitors because they never worked very well. One modification we made was to apply liquid fertilizer with an electric pump.”

Best Buy

Bobcat skid steer loader

Leon E. Allison, Doylestown, Ohio · Vol. 23, No. 2 (1999), p. 15

“I bought my Bobcat skid steer loader used 13 years ago and have had absolutely no problems with it. It was the smallest model they made, just 36 in. wide. It fits through the narrow gates and doors in my barn. I have a bad back and without this loader, I’d have to hire barn cleaning or be out of business.”

Best Buy

Stihl 044 + 1 more

Mike Graham, Edison, Ohio · Vol. 23, No. 2 (1999), p. 15

Mike’s been cutting his own firewood for 18 years and says he’s never had a chain saw as dependable as the 1996 Stihl 044 he’s using now. “I’ve always come back from the woods fully loaded, unlike some of the times I came back empty with other brand chain saws. It’s a very aggressive cutter and is easy on gas. It’s needed no repairs.”

Mike also likes his 1995 Deere 425 lawn tractor but he’s had trouble with the mower’s 54-in. deck. “In heavy or high grass, it discharges poorly. The company has tried to correct the problem and offered to buy it back from me so I can upgrade to a 60-in. deck. Unfortunately, the bigger deck is too wide for my property.”

Best BuyWorst Buy

Chevrolet C2500 HD Silverado pickup + 1 more

Richard Spaulding, Waldport, Ore. · Vol. 23, No. 2 (1999), p. 15

“I’ve had no problems at all in the 40,000 miles I’ve driven it,” says Richard, pleased with his 1996 Chevy C2500 HD Silverado pickup. “The 5.7-liter Vortec engine has plenty of power, performs well and gets 17 to 18 mpg.”

On the negative side, Richard’s “not impressed” with his 1996 Husqvarna 41 chain saw. “From day one, it’s leaked fuel. Plus, the electronic ignition failed within the first three hours of use.”

Best Buy

John Deere 850 lawn tractor equipped

John Dodds, St. Mary’s, Ohio · Vol. 23, No. 2 (1999), p. 15

“It pays to buy good, brand name tools,” says John. “I learned that lesson from buying a 20-ton Harbor Freight hydraulic drill press. It leaks oil and the ram sticks. The company sent the wrong replacement parts for the original assembly.”

On the positive side, he’s happy with a 1984 Deere 850 lawn tractor equipped with a 72-in. belly-mounted deck. “It’s very economical, uses less fuel than a 12 hp. lawn tractor, and I’ve had absolutely no mechanical problems in the 3,000 hours I’ve used it. The battery lasted 10 years. We bought a new Deere 870 last year but kept the 850 because replacement only ran about 20 hours before it went out. I waited two years before replacing it and now I’ve run the new one about 20 hours and it smells like it’s ready to fail at any time. In my opinion, the company needs to make the center gear box heavier than the outside gear boxes.”

Best Buy

One of my best buys ever is FARM SHOW magazine

Wesley Jones, Jonesboro, Texas · Vol. 23, No. 2 (1999), p. 15

“One of my best buys ever is FARM SHOW magazine. I read it from cover to cover and admire the ingenuity of people who have the ability to convert an old piece of machinery into something more useful instead of toting it off to the dump. Keep up the good work.”

Best Buy

D.R. Trimmer mower equipped

Donald E. Worden, Kerkhoven, Minn. · Vol. 23, No. 2 (1999), p. 15

Donald’s “best buy” is a D.R. Trimmer mower equipped with 5 hp engine with electric start (Country Home Products, Meigs Road, P.O. Box 25, Vergennes, Vt. 05491; ph 800 376-9637). “Electric start makes it a dream to use. It rides on wheels so there’s no vibration, as on conventional hand-held string trimmers. I have a brush blade for it that cuts down small trees and brush with ease.”

Best Buy

John Deere 4-row 1750 planter

John Bahl, Sherrill, Iowa · Vol. 23, No. 2 (1999), p. 15

“I’ve had no major problems in the first year,” says John, “generally satisfied” with his 1998 Deere 4-row 1750 planter. “However, seed spacing could be better and it needs grease zerks on the hydraulic lift linkage to extend life.”

John removed the original tongue from the planter and replaced it with a bridge hitch so he can mount a Roterra on his 3-pt., between the tractor and planter. “By pulling the planter behind the Roterra we are able to do final tillage, spray and plant in one pass,” he says.

Best BuyWorst Buy

Ford F-150 pickup equipped + 2 more

Wayne C. North, Pawnee City, Neb. · Vol. 23, No. 2 (1999), p. 15

One of Wayne’s “best buys” is a 1997 Ford F-150 pickup equipped with 5.4-liter engine, 4-speed automatic transmission and limited slip 3:55 rear end. “It has the horsepower to run at interstate speeds and still provide great gas mileage. When you step on the gas, it really rocks. Few cars I’ve owned have the kind of pickup this truck does. It’s a real pleasure to ride and drive.”

On the negative side, he’s unhappy with his 1992 Bush Hog 2512 shredder. “I hadn’t run it more than 20 hours when the center gear box gave out. After a year’s worth of phone calls and talks with the company, they agreed to replace it if I paid the freight. The mower. “The Honda is the best little workhorse on the place. It’ll pull a flatbed trailer with about 30 bales on it. The Deines mower is easy to operate and turns on a dime. It’s also easy to maintain and clean because the deck tips up in front. It cuts our mowing time by two-thirds and it cost two-thirds less than comparable models and makes.”

Clifford’s “worst buy” was a Troy 352 Garden Way Speedy Hoe. “If you run the gas tank dry, you’ll have problems. It loses power and will not run until you take the carburetor off and clean it.”

Best BuyWorst Buy

Vermeer L big round baler + 1 more

Donald R. Nutt, Center, Mo. · Vol. 23, No. 2 (1999), p. 15

“I had virtually no problems making 1,200 bales last season,” says Donald, pleased owner of a 1998 Vermeer L big round baler. “I traded a 1993 Super J for it. The Super J was a good baler but the L makes heavier bales with less stress on the operator. That’s important to me because I do custom baling and my baler has to run.”

Donald’s worst buy is a 1987 FordRanger pickup equipped with a 4-cyl. 2-liter engine and 5-speed transmission. The first year, mileage was a fair 20 to 24 mpg. Then it dropped to 16 to 18 and had no power. I ran it to 113,000 miles and traded it for a 1980 Chevy 1/2-ton Scottsdale just to be rid of it.”

Best Buy

Gehl discbines

Melvin Theisen, Blackduck, Minn. · Vol. 23, No. 2 (1999), p. 15

Melvin’s had good luck with both of the Gehl discbines he’s owned. “I bought a new one in 1994 and cut 800 acres of undesirable, rough, rocky ground every year for three years. I didn’t spend a dollar in repairs on it other than to replace the blades. So I bought a new 2360 in 1998 and it’s just as good as the old one. It’s the best new piece of equipment I’ve ever purchased.”

Best Buy

Honda Foreman 400 ATV + 2 more

Clifford Scott, Didsbury, Alberta · Vol. 23, No. 2 (1999), p. 15

Two of Clifford’s “best buys” are a Honda Foreman 400 ATV and a Deines 1800 KT lawn his Craftsman 4 1/2-in. angle grinder and Craftsman 3/8-in. electric drill “Both are equipped with Unity motors that burned up after a few hours use. Rather than return them under warranty, I tossed them and purchased DeWalt replacements which are much better built.”

Worst Buy

Revere steel siding

Orrin Strand, Albion, Neb. · Vol. 23, No. 2 (1999), p. 15

“My worst buy is the Revere steel siding I put on my house in 1981. About five years ago the paint started to peel off and I now have large areas with no paint.

“I bought the siding from Modern Improvement Corp. of Iowa. Revere is owned by Gentek Corp. of New Jersey. Their offer was to repaint the siding at about the same cost to me as the original job, or $200 cash to forget the whole thing. I don’t plan on doing either.”

Best BuyWorst Buy

Massey Ferguson 231 utility tractor + 2 more

Charlie Bratten, Albuquerque, N.M. · Vol. 23, No. 2 (1999), p. 15

“Location of the brake and clutch pedals could be improved. They’re too high,” says Charlie, who’s otherwise happy with his 1990 Massey Ferguson 231 utility tractor. “The Perkins 3-cyl. AD3 engine delivers plenty of power and it starts easily on cold mornings.”

On the negative side, he’s unhappy with says Orin who bought a 1998 Lackender backhoe attachment for his skid steer loader (Lackender Fabrication, 4661 Dane Road S.W., Iowa City, Iowa 52240; ph 800 498-8032 or 319 338-4114; website: www.lackender-fab.com). “It digs an 8 in. deep trench and quick-taches in place of the bucket. It worked really well even in last summer’s dry conditions.”

Orin also likes his 1996 Better Bilt hydraulic hog cart manufactured Waste Control Corp. “You pull the 16-ft. walk-on trailer behind your tractor to load hogs. Really works slick.”

Best Buy

Chevrolet 271 pickup

Jay L. Smith, Immokalee, Fla. · Vol. 23, No. 2 (1999), p. 15

“I’ve put over 250,000 trouble-free miles on it,” says Jay about the 1994 Chevy 271 pickup he nominates as “best buy”. “I’ve used it for hauling, hunting and heavy loads and have had it stuck more times than I care to remember. I’m abusive but it’s never let me down.”

Best Buy

Case 970 diesel + 1 more

Victor E. Janz, Cupar, Sask. · Vol. 23, No. 2 (1999), p. 15

“It’s the best tractor I’ve ever owned,” says Victor, pleased with a 1976 Case 970 diesel he bought used 20 years ago. “It had 1,200 hours on it when I bought it and now has 6,800. It’s never been touched.”

He’s also pleased with his 1987 Ford pickup equipped with 6-cyl. engine and 4-speed transmission. “I put nearly 100,000 trouble-free miles on it. It still has plenty of power and runs great.”

Best Buy

John Deere 270 disc mower + 1 more

Terry Heeke, Dubois, Ind. · Vol. 23, No. 2 (1999), p. 15

Two of Terry’s “best buys” are his 1997 Deere 270 disc mower and his 1997 Deere 752 hay tedder. “The mower doesn’t clog and cuts twice as fast as the Deere 1209 mower-conditioner I used before. The tedder fluffs and dries hay as fast as a conditioner.”

Terry also says he couldn’t do without his Makita cordless driver. “It comes in real handy for fixing feeders and other work in my livestock barns.”

Best BuyWorst Buy

Ford F-250 turbo-diesel pickup + 1 more

Gary Fesmire, Dyer, Tenn. · Vol. 23, No. 2 (1999), p. 15

One of Gary’s “best buys” is a 1994 Ford F-250 turbo-diesel pickup. “I’ve put 125,000 miles on it with no problems. It still looks new and starts and runs like new. I think more of it every time I price a new one.”

On the negative side, he’s had bad luck with hisDelco power washer. “It didn’t work right when it was new and nobody would fix it. I’d ask dealers at farm shows to fix the washer and they said they’d be out next week, but “next week” never came. Finally, I bought a Panther washer that’s excellent.”

Best Buy

Farmall C + 1 more

Lawrence Caley, Bloomington, Wis. · Vol. 23, No. 2 (1999), p. 15

“The best tractor I’ve ever owned is a Farmall C I bought new in 1950. I’ve only had to grind the valves twice and just replaced the rear tires for the first time two years ago.

“The best pickup I ever owned is a Toyota 4-WD I bought new in 1987. It has almost 200,000 miles on it and runs like new without using any oil. The Dunlap tires it was originally fitted with lasted 88,000 miles.”

Best Buy

One of the handiest livestock tools we’ve ever found is the Calf Tape

Ken Brown, Elrose, Sask. · Vol. 23, No. 2 (1999), p. 15

“One of the handiest livestock tools we’ve ever found is the Calf Tape featured in FARM SHOW a couple years ago(Vol. 20, No. 4),” says Ken. “I bought two of them and I want to buy a couple more because my first ones have been used so much they’re wearing out.

“Here’s the way it works. You measure the diameter of a newborn calf’s hoof and that is converted to a weight. The weights are printed right on the tape next to the measurements. When I first got the tapes a couple years ago, I first checked them with a regular calf scale. I was so skeptical I checked 30 to 40 weights and they were all within 4 to 5 lbs., which is good enough for me. I don’t have to carry a scale with me anymore and it’s a lot quicker and easier to use. I have Charolais, Angus and Herefords and it works on all of them. It sells for $8.95 from Farm Home Offices, 1965 64th St., Garrison, Iowa 52229 ph 800-788-7218 or 612 920-0907).”

Best BuyWorst Buy

Case-IH 5140 Maxxum tractor + 1 more

Tommy Armstrong, Bloomfield, Ky. · Vol. 23, No. 2 (1999), p. 16

“I’m well satisfied with my Case-IH 5140 Maxxum tractor which replaced my Deere 4020. It has a lot of power, starts easy in the winter, and handles well.

“My New Holland 650 round baler is my worst buy. It never worked right from day one. The hay had to be dry, the windrow just right, and the baler twine just so for it to work right. I had to have my neighbor bale half my hay just so we could get done. My old New Holland 853 baler would run circles around this model.”

Best BuyWorst Buy

White 2-85 tractor + 3 more

Ted Sookaci, Fombell, Pa. · Vol. 23, No. 2 (1999), p. 16

Ted’s impressed with his 1985 White 2-85 tractor. “It has 3,100 hours on it but still works great. My only expenses have been for filters, tires, and a radiator repair. I use it to do all the major work on my 200-acre farm.

“I use my 1976 Gehl 95 grinder-mixer every week. Over the years I’ve replaced three bearings and a main belt. No other problems.”

On the minus side, he lists his 1980 White 2-70 tractor. “I bought it used with only 675 hours on it and thought that I was buying a quality product that would provide years of service. However, after two broken crank-shafts, a failed water pump, and hydraulic and transmission problems, I finally gave up and sold the tractor to a dealer. It had only 1,510 hours when it left the farm.

“I own several Oliver tractors - an 88 diesel, 77 diesel, 880G, 550G, and 1550G, along with the White 2-85, and have had good luck with all of them. Some of the older models have more than 8,000 hours on them with no repairs other than engine overhauls. Some of my neighbors have 1655 models with high hours and they haven’t experienced anything like the problems I’ve had with my 2-70. When I bought the 2-70 I thought that it was identical to the 1655. Since then I’ve noticed that 2-70’s are the most available used White tractor, and now I know why.”

Best Buy

Muller Industries, Inc

Cliff Conway, Comanche, Texas · Vol. 23, No. 2 (1999), p. 16

Cliff’s impressed with new and reconditioned windmills from Muller Industries, Inc., (1102 West 21st St., Yankton, S. Dak. 57078). “This company starts with good used Aermotor windmill parts that were originally made in Chicago. They recondition some of the parts and make others on their own. I’ve sold many of their windmills over the past 12 years and have never had a claim against any of them. The company has a 12-year warranty against defects in materials and workmanship which is the best warranty I know of in the U.S. They produce a good product.”

Best Buy

Belarus 572 tractor

Eldon Harvey, Ft. Pierre, S. Dak. · Vol. 23, No. 2 (1999), p. 16

“My best buy is my 1991 Belarus 572 tractor. I have over 2,000 hours on it and use it for all my work. It’ll pull a 36-ft. grain drill on the level. It does have oil leaks which is a common problem with Belarus tractors. I also have a Belarus 1500 model that I bought used and like it too. Both tractors pull good. I wouldn’t hesitate to buy another one.”

Best Buy

Bolens 1502 garden tractor equipped

David V. Smith, Beloit, Ohio · Vol. 23, No. 2 (1999), p. 16

David owns a “best buy” 1985 Bolens 1502 garden tractor equipped with a 3-cyl. 15 hp diesel engine. “This tractor was built by Iseki in Japan. Before I bought this tractor I used to wear out an 18 hp Case model every two or three years. No problems with it - just regular maintenance. It has all the features my larger tractors have including a 3-speed pto, differential lock, 3-pt., etc. I use it to mow and spray. It’s also fuel efficient.”

Best BuyWorst Buy

Stihl chain saws + 2 more

Jared Chaddock, Batavia, N.Y. · Vol. 23, No. 2 (1999), p. 16

Jared likes his Stihl chain saws - a 1997 017, 029 Farm Boss, and 036 Super. “My brother and I use the saws only on occasion to cut firewood, and they sometimes will sit for months at a time. They always start, however, as if they had just been used the day before. All three models have great power and I can use the full length of the bar without any problems. They’re all easy on fuel. At the end of the day I hardly feel like I’ve even been running a saw.

“My 1997 Husqvarna 51 chain saw is my worst buy. We were able to use it only a couple of days to cut firewood before we found out that the oiler wasn’t working properly, which caused the chain and sprocket to wear excessively. The problem was an improperly machined oil hole, which we fixed ourselves. However, the dealer wouldn’t replace the worn parts because he said that we had ‘altered’ the saw. We promptly went to a different dealer and traded the saw in for the Stihl 036 model.”

Best Buy

Ford F-250 4-WD extended cab pickup

Neil Carleton, Clatskanie, Ore. · Vol. 23, No. 2 (1999), p. 16

Neil’s impressed with his 1987 Ford F-250 4-WD extended cab pickup equipped with a 6.9-liter diesel turbocharged engine and 3-speed automatic transmission. “We load it up with an 11-ft. 2,500-lb. camper, hook a 18-ft. stock trailer full of horses and mules behind it, and head for the mountains. It gets decent mileage and has a lot of power on hills. It’s built Ford tough.”

Best Buy

Kawasaki Mule 500 ATV

F.H. Goforth, Alexander, Ark. · Vol. 23, No. 2 (1999), p. 16

“My Kawasaki Mule 500 ATV is the best thing since sliced bread. It lets me carry everything I need to repair them. I added a Lexan windshield and top onto the machine - plexiglass won’t work. I use my Mule every day, and my 7-year-old grand daughter even uses it to run errands.”

Best Buy

Allis-Chalmers WD + 4 more

Lewis A. Durst, Aurora, W. Va. · Vol. 23, No. 2 (1999), p. 16

“My 1950 Allis-Chalmers WD and 1960 Allis-Chalmers D-12 tractors are both best buys. I farmed with them until 1975 when our dealer went out of business. I still own both tractors. They’ve both been overhauled once.

“Since 1975 I’ve been using Deere tractors - a 2030, 2240, 1050 MFWD, 350 dozer, 575 skid steer loader, and 212 and 345 garden tractors. I had to replace a cracked fuel injector on the 2030 five years ago and also replaced a fuel pump on the 2240. The Deere tractors are all best buys, too.

“My New Holland haybine and manure spreader and Fox chopper are best buys. So is my Deere 345 round baler.”

Best BuyWorst Buy

Barrett 32 + 1 more

Monty Main, Crockett, Texas · Vol. 23, No. 2 (1999), p. 16

Monty nominates his Barrett 32 by 8-ft. aluminum gooseneck trailer with dual tandem wheels as his “best buy”. “This trailer is built for commercial haulers. I like the versatility it offers with the floating gate option in the front. It lets me haul commercial cattle or show cattle at the same time. The company stands behind its product and offers a 6-year warranty on the welds and other parts. We’ve already worn out one truck used to pull this trailer. The trailer looks as good today as the day we bought it.

“My Makita 14-in. chop saw is my worst buy. The first Makita I bought quit working after I made only six cuts through some 3/4-in. dia. pipe. I took it back to the dealer the next day and he gave me another saw to use. That one lasted only about five days before it quit, too. Both saws weren’t used enough to even burn the factory blade up. I still haven’t gotten the second saw fixed because of dealer problems.”

Best BuyWorst Buy

Raven SCS 440 spray monitors + 2 more

Lewis Senter, Plainview, Texas · Vol. 23, No. 2 (1999), p. 16

“Spraying now is extremely accurate,” Lewis says, thanks to the 1997 and 1998 Raven SCS 440 spray monitors he uses (Raven Industries Inc., P.O. Box 5107, Soux Falls, S. Dak. 57117; ph 605 336-2750). “There are no wasted chemicals. The system is extremely reliable and user-friendly. It pays for itself quickly because of exact chemical application per acre. It really gives the operator confidence the spraying job is correct.”

Likewise, he says he’s had good luck with his 1997 Dodge 1500 4-WD pickup equipped with a 360 cu. in. engine. “It handles well, has plenty of power and is easy on gas. I’ve had no problems in 42,000 miles.”

On the negative side, the 1998 Red Ball 10-row (30-in.) hooded sprayer he uses leaves something to be desired. “The spray tips are hard to reach for cleaning or when changing to another size tip.”

Best Buy

Enco milling machine + 1 more

Donald D. Tryor, Bemidji, Minn. · Vol. 23, No. 2 (1999), p. 16

One of Donald’s “best buys” is a 1997 9 by 49-in. Enco milling machine (5000 West Bloomingdale, Chicago, Ill. 60639; ph 800 873-3626). “Everything on the mill works as advertised, especially the servo power feed and the 3-axis digital readout. I’ve used it to make a new oil filter base for an Oliver 660 tractor and to make other parts that are hard to find, such as jets and throttle shafts for carburetors.”

Another “best buy” is his Lincoln welder. ”The dealer fixed initial problems with it - it needed a new liner - and it’s worked fine ever since.”

Best Buy

John Deere 4230 tractor

Walter Baldner, Jr., Austin, Minn. · Vol. 23, No. 2 (1999), p. 16

“Our ‘best buy’ is a Deere 4230 tractor we purchased new in 1973. We overhauled the engine at 8,640 hours and it now has about 12,400 on it. We installed 50 series pistons when we overhauled the engine so it starts easily in cold weather. We use the tractor for all our spraying and snow-plowing, and the pto works well to fill our grain dryer with our 10 by 16-in. auger.”

Best Buy

Case-IH Steiger 9350 4-WD tractor

Arnold Helgeson, Southey, Sask. · Vol. 23, No. 2 (1999), p. 16

“It’s a great tractor for our farm,” says Arnold about the 1998 Case-IH Steiger 9350 4-WD tractor he and his sons bought. “The 310 hp Cummins M11 engine and 12-speed transmission have plenty of power. It never slows down, even pulling our 40-ft. tow-between air drill. The hydraulics are fast and the cab is comfortable with its air swivel seat.”

Best BuyWorst Buy

Cozyburn outdoor wood furnace + 1 more

Ronald J. Fitzgerald, Seeley’s Bay, Ont. · Vol. 23, No. 2 (1999), p. 16

“It makes more even heat and heats the water heater better with no more wood than other wood furnaces with box stoves I’ve used,” says Ronald, pleased with his Cozyburn outdoor wood furnace (Cozyburn Manufacturing Inc., Box 888, Arborg, Manitoba, Canada R0C 0A0; ph 204 364-2318).

On the negative side, he’s unhappy with his Makita 5-in. angle grinder. “The brushes burned out after one year. I replaced them and then the armature failed. This grinder cost $300 and had only a one-year warranty. So I bought a Craftsman for $100 that has a two-year warranty. It works better.”

Best Buy

Ford F-150 pickup equipped

J.G. Chrisman, Pittsboro, Ind. · Vol. 23, No. 2 (1999), p. 16

He’s had a lot of problems with the 1995 Ford F-150 pickup, equipped with 6-cyl. engine and standard transmission, which he bought used last June. “The clutch went out in July and again in November. This time, there was extensive damage to the transmission which required a lot of repairs and downtime. About three weeks later the transmission and clutch went bad again. All this with normal driving, not pulling a trailer or any extra weight.”

Best Buy

a Steelmaster building

Sheila Hoffman, Ruther Glen, Va. · Vol. 23, No. 2 (1999), p. 16

“We wanted a pole-type building about 30 by 40-ft. so we could put a shed off the roof on each side. We’d tentatively settled on a Steelmaster building and even put a deposit on one last fall when we began to suspect it just wasn’t going to meet our needs. We tried to get our deposit back but were told we were allowed only three days to change our minds. Finally, we decided we’d go with what we could get for our deposit - a 10 by 10-ft. shed. Needless to say, we’re not very happy with the sales people, customer service people or the way Steelmaster runs their business.”

Worst Buy

Coleman 10 hp 5

Thomas Spurliwg, Ft. Lypton, Colo. · Vol. 23, No. 2 (1999), p. 16

Thomas is unhappy with his new Coleman 10 hp 5,000-watt generator. “The output voltage is determined by the engine rpm’s. The owner’s manual, which was missing, stated the voltage was factory-set. And it was. After I purchased a volt meter, I discovered the voltage was set at 135. I’d think Coleman could at least include a volt meter with the generator for little or no extra cost.”