Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 38, No. 5 (2014)

Best & Worst Buys: FARM SHOW Vol. 38, No. 5 (2014)

69 reports from pages 12–15 · 67 Best Buys7 Worst Buys · See everything in this issue at FARM SHOW →

Best Buy

Chevrolet 1500 1/2-ton pickup equipped + 1 more

Eldon Kerns, Goldendale, Wash. · Vol. 38, No. 5 (2014), p. 12

“Last January I bought a new Chevrolet 1500 1/2-ton pickup equipped with a 5.3-liter gas engine. I planned to convert it to run on liquid propane. However, after I bought it I learned that it has a new DI (Direct Injection) fuel system that can’t be converted the way the SEFI (Sequential Electronic Fuel Injection) models can.

“I’m a propane distributor and I drove my 2005 Chevrolet 3/4-ton pickup on propane until I traded it for this 2014 model. As a matter of fact, I’ve used propane in all my vehicles, including riding mowers and 4-wheelers, for 25 to 30 yrs.

“I didn’t bother to ask if the 2014 model could be converted to propane because I had never heard otherwise. I had already purchased a propane conversion kit from a company in New York for $4,700 before I learned that I couldn’t use it. Fortunately, I hadn’t opened the kit yet so I was able to return it and get my money back. Then I tried to get my old pickup back, but the dealer had already sold it.

“Propane burns clean and is about $2 a gal. cheaper than gas, but I can’t take advantage of that price difference any more. If I had bought a model with the 6.0-liter SEFI engine I could have converted it. The fine for tampering with the engine’s fuel injection system is $5,000 a day. Only someone who is EPA certified can make changes to the engine with certified equipment.”

Eldon has been working with Wolff Specialties in Vancouver, Wash., which is an EPA conversion center (ph 360-601-8080; www.wolffspecialties.com). Owner Dan Wolff says, “We felt extremely bad for Eldon when we found that his new 5.3-liter Chevrolet has a DI engine. This new engine type has extremely complex electronic controls, but it allows more efficient use of fuel and lowers the emission output.

“With the technology on all the new pickup models these days it’s hard to keep up, but we’ve acquired all the EPA certifications in the propane conversion systems that can be distributed in the U.S. So we’ll have a solution for Eldon in the near future. Currently his particular pickup make and model is going through the EPA certification process. Our supplier, ICOM, which is out of Michigan, says they should have that certification later this year. Once that goes through, we’ll be able to address the conversion for Eldon.”

Best Buy

Rustoleum fast dry spray

Roger Gutschmidt, Gackle, N. Dak. · Vol. 38, No. 5 (2014), p. 12

“I use a lot of Rustoleum fast dry spray paint. The company sells exact match colors for Deere green and yellow. I’ve bought them at Fastenal for $10 per can and in my opinion, the colors match perfectly, as good as the paint you can buy at Deere stores for $15 per can. The Rustoleum cans are bigger and I like the fast dry part, which makes for a good finish with no runs.”

Best Buy

Polaris ATV

Vernon Knack, Correctionville, Iowa · Vol. 38, No. 5 (2014), p. 12

“I have a 2005 Polaris ATV with an automatic transmission. At about 2,600 miles, the transmission would not let go while in gear and the machine would keep moving at idle. I figured out that the magnesium belt pulley on the transmission had worn enough that when it closed it would squeeze the belt, causing the machine to keep moving. I took that pulley apart and inserted a washer in between the pulleys to solve the problem. Cost was less than $2. The dealer had estimated $300 to $400 to fix it. I’ve used it for a year with no problem. It does not affect the balance of the pulleys. It should be noted that you cannot weld magnesium without causing a fire.”

Best Buy

John Deere

C.R. Williams, Comox, Vancouver Island, B.C. · Vol. 38, No. 5 (2014), p. 12

“I’ve followed with interest stories in recent issues of FARM SHOW about high-priced parts from Deere. Your U.S. readers might be interested in what it’s like to own Deere equipment in Canada, especially if you’re not near the border. I had to replace a glass panel on my 5085M tractor door. List price in the U.S. is $295. Because the part is also available in Canada, Deere won’t ship direct from the U.S. Orders have to go through a Canadian dealership, which charged me $620. Now that’s what I call a real rip-off.”

Best BuyWorst Buy

Howse bush hog + 3 more

James W. Howe, Jr., Luverne, Ala. · Vol. 38, No. 5 (2014), p. 12

“Several issues ago you published a report about someone who was unhappy with his Howse bush hog. He said that every time he used the machine, something would break and he would have to weld it.

“As near as I can figure out, he must have bought a light duty model and tried to cut 3-in. dia. trees with it. Despite his ‘worst buy’ report, I purchased a new 6-ft. wide Howse 6100T mower, which I really like (ph 601 428-0841; www.howseimplement.com). It does an excellent job and is built tough.

“Also on the positive side, I’ve had good luck buying from the Surplus Center (ph 800 488-3407 ; www.surpluscenter.com). They offer ‘take-offs’, which means they sell brand new equipment that has been taken off a machine and is sold as parts. They sell engines, hydraulic hoses, pumps and motors, air hydraulics, tires, belts, gearboxes, wheels, and much more.

“I was able to buy some hydraulic hoses from them for only half as much as I’d have paid locally. I also replaced all the connections on my 1960 Case 310B backhoe with 3/4-in. quick disconnect couplers. I paid $22.95 for a complete set of male and female couplers. Locally, the same couplers would have cost more than twice that much.

“More recently, I purchased a 17 1/2 hp Briggs and Stratton vertical engine for my Murray lawn tractor for $439.95 plus $36 shipping UPS. I bought it on a Tuesday and it was delivered on Friday. Now, that’s service.”

Best Buy

Ford 9N tractor + 2 more

Carl E. Pletcher, Altoona, Ala. · Vol. 38, No. 5 (2014), p. 12

“Carl’s happy with his 1942 Ford 9N tractor, and a home-built tractor he calls his Baby N. “I painted it the same color as the 1950 8N that I grew up driving as a kid. I prefer the 8N color.

“To build the Baby N I bought an Awesome Henry V-8 Ford conversion kit and installed it on a Kubota tractor’s frame (ph 937 497-9447; www.awesomehenry.com). My Baby N has the 8N’s dash, running boards, and a flip-up seat. Last winter I added a 3-pt. hitch that’s operated by an electric linear actuator. I also built a bush hog, turning plow, and light disk cultivator for the Baby N.

“I also own a 1945 Ford 2N, 1954 Ford Jubilee, 1955 Ford 600 and 800, and 1975 Ford 2000.”

Best Buy

Kubota L4600 HST 4-WD tractor equipped + 1 more

Terry Heckman, South Bend, Ind. · Vol. 38, No. 5 (2014), p. 12

“I like my 2013 Kubota L4600 HST 4-WD tractor equipped with an LA764 front-end loader. I use it to pull a haybine, baler, 2-bottom plow, and bush hog. I also use it to power a post hole digger, 3-pt. mounted spreader, hay rake and rear blade. It has power to spare for any job. Last winter it started right up at temperatures down to 16 degrees below zero and went right through 4-ft. deep snowdrifts. I used the loader to pile snow 20 ft. high. One time I buried the tractor in a swamp and used the bucket, 4-WD and rear wheel lock to get myself out. This tractor is unstoppable.”

On the “worst buy” side, “Three months after I bought my 2013 Sears Craftsman LT2000 riding mower, fuel leaked into the crankcase and I had to order a new carburetor for $196. The mechanic said the problem is that ethanol eats the seals out of the carburetor. I asked him to install a fuel shutoff valve, but the company wouldn’t allow him to do it so I installed one myself.”

Best Buy

AutoFlex Air Suspension system

Gerald Johnson, Union, Ore. · Vol. 38, No. 5 (2014), p. 13

“Last April I installed an AutoFlex Air Suspension system on my 2000 Ford F-350 pickup in order to improve the ride and keep the vehicle level whether it’s loaded or unloaded. I paid $4,000.

“I talked to several people who claimed this product was great and made their truck ride as smooth as ever. However, on my first test drive I was very disappointed. I called a company rep and asked some questions, sent photos, and got some advice on how to improve the ride. But after doing everything they said I was still disappointed. They recommended some modifications so I spent an extra $150 trying to make the system work. Yet when I recently drove the pickup about 1,800 miles, it felt like I was driving a 1950 Mack logging truck.

“The company told me I could send the product back, but that I’d have to pay a shipping fee and a 30 percent restocking fee. I’m extremely unhappy with both the product and the customer service.”

Best Buy

Stihl weed trimmer + 1 more

Steve Cunningham, Sunapee, N.H. · Vol. 38, No. 5 (2014), p. 13

“My 1984 Stihl weed trimmer still runs like a top. I didn’t realize how old it was until I recently had to buy a new-style ‘bump’ string reel on it. I also tuned up the carburetor and put in a new air filter and spark plug.”

On the “worst buy” side, “I’ve never had a Tecumseh engine that would start without requiring a hundred pulls and a lot of babying. One engine was so bad that one hot, muggy day, after making about 50 pulls on the starter, I went in and came out with the perfect tool – a sledge hammer. It’s amazing what one of those can do to an engine block. Now I buy only Briggs & Stratton or Honda engines.”

Best Buy

BCS 722 walk-behind tractor equipped

Matthias Hilty, Monroe, Ind. · Vol. 38, No. 5 (2014), p. 13

Matthias likes his BCS 722 walk-behind tractor equipped with an 8 hp Honda engine and a rear-tine tiller (ph 800 543-1040; www.bcsamerica.com). “It’s built strong and doesn’t jump a lot in hard ground. It might be a little more expensive than some others on the market, but it’s worth it. Working the ground is a much faster and easier job than with our Honda tiller. Also, many different attachments are available.”

Best BuyWorst Buy

Snapper rear engine riding + 2 more

Joseph Jonassen, Athens, Wis. · Vol. 38, No. 5 (2014), p. 13

“My worst buy ever is a Snapper rear engine riding mower I bought new 6 years ago with a 30-in. deck.

“The deck cuts heavy grass well due to its single blade design. However, in order to get a smooth cut I have to adjust the deck very carefully. The transmission uses a rubber drive wheel on a steel disc, and the drive wheel has to be replaced about every 3 mo. The deck can be stood on end, which makes it easy to clean. But when I stand the deck on end, the battery leaks acid that drips onto a plastic part in the throttle linkage. As a result, the throttle linkage has broken twice.

“Whenever the deck hits a rock, the front end gets dented. The mower’s shift lever and steering shaft broke, and the plastic bushings in the steering system had to be replaced twice. The alternator quit working about 1 1/2 years ago.”

On the positive side, he likes Stihl chainsaws. “Our first one, an 034 model, worked flawlessly for years with no problems. We finally retired it in favor of a new 391 model, which also worked great. Several months ago we bought another 391, but after going through less than 3 tanks of gas the saw began vibrating and making noises. The dealer replaced it at no cost, and the new one has worked great.

“I also like my Efco 8742 Olympyk 2-cycle industrial weed trimmer (ph 800 800-4420; www.efcopower.com).”

Best Buy

FrontPoint home security system

Harrison Benjamin, Hastings, Minn. · Vol. 38, No. 5 (2014), p. 13

Harrison nominates his FrontPoint home security system as his “best buy” (ph 877 298-2954; www.frontpointsecurity.com). “It took me only 20 min. to install this self-installed security system. It’s an entirely wireless system that works with a cell phone. No landline phone is required. It uses sensors that connect wirelessly to a touch-screen control panel. The control panel sends instant alerts to a monitoring center, over a secure cellular network. There are no wires in your walls for burglars to cut.

“The company has great customer service. Extra features are available including a freeze alarm, water alarm and video monitoring.”

Best Buy

Kenworth W-900 semi tractor

Todd Heideman, Willow, Alaska · Vol. 38, No. 5 (2014), p. 13

“My 1994 Kenworth W-900 semi tractor has more than 2 million miles on it yet has required only regular maintenance. It’s powered by a Caterpillar 3406 engine that responds well to synthetic lubes and starts in all weather conditions. It still gets about 12 mpg fully loaded. I use synthetic grease throughout.”

Best Buy

Gravely ZTR zero-turn riding mower

Dave Mertell, Independence, Mo. · Vol. 38, No. 5 (2014), p. 13

“I’ve had good luck with my 2012 Gravely ZTR zero-turn riding mower equipped with a 34-in. deck. We use this mower hard, yet it has had no problems. It always starts and gets in and out of tight spots easily. It’s also easy on fuel and simple to maintain.”

Best Buy

GM Sierra 1500 SLT

Kurt Wasilewski, Perronville, Mich. · Vol. 38, No. 5 (2014), p. 13

Kurt’s impressed with his 2014 GM Sierra 1500 SLT all terrain 4-WD pickup equipped with a double cab. “It doesn’t handle like any pickup I’ve owned in the past – and I say that in a good way. The creature comforts, amenities, ride and handling on it are impressive, as is the torque and responsiveness of the 6.2-liter direct gas-injected engine.

“This pickup pulls like no other and still consistently gets more than 20 mpg on the highway at 60 mph. It has cylinder deactivation that isn’t recognizable except for the fact that you can view on a display that it’s running on 4 cylinders. If you’re in the market for a new pickup, take this one for a test drive.”

Best Buy

Ford Fusion fills

A.E. Parman, Excelsior Springs, Mo. · Vol. 38, No. 5 (2014), p. 13

“Being 84 years old and fully retired, my only need now is for reliable, comfortable transportation. My 2010 Ford Fusion fills the bill. It’s also very economical whether I’m going to town, on a long trip, or making a parts run. It pleasantly handles any job.”

Best Buy

John Deere 950 tractor + 1 more

Sal Spiezio, Port Jervis, N.Y. · Vol. 38, No. 5 (2014), p. 13

“My 1984 Deere 950 tractor has never failed me and still runs like new.

“My 2012 Husqvarna 445 chainsaw doesn’t oil the chain adequately, and that caused it to burn up after only 15 min. of use. The saw was brand new out of the box. Unfortunately, I bought the saw 2 years ago but hadn’t used it, so the warranty had expired. I called the company but they wouldn’t make good on it. I did some research and found that other people are having the same problem with this model.”

Best Buy

Red Max backpack leaf blower

Bob Halaska, Waupaca, Wis. · Vol. 38, No. 5 (2014), p. 13

“My Red Max backpack leaf blower starts right up every time and works fantastic all year long (www.redmax.com). I use it to blow leaves, pine needles, and snow and to clean out gutters, barns, and garages. Unfortunately, my wife won’t let me clean the house with it!”

Best Buy

Bad Boy Magnum zero-turn riding mower

Ozie Prier, Fredericktown, Mo. · Vol. 38, No. 5 (2014), p. 13

“My Bad Boy Magnum zero-turn riding mower equipped with a Kohler engine and a 54-in. deck works great and is comfortable to operate. Our lawn is very uneven so it’s a challenge. The mower is user friendly and comes with a 2-year complete coverage warranty. It’s made in the U.S. and reasonably priced.”

Best Buy

Hay Anchors

Gerald Fedler, Fort Madison, Iowa · Vol. 38, No. 5 (2014), p. 13

Gerald likes tarp anchors from Hay Anchors (ph 970 218-3035; www.hayanchors.com). “I had been using metal anchors but they were hard to see when I had to take them out. These plastic anchors are bright orange and easy to screw in. Also, they hold good in hay. I didn’t have any tarps come loose from the high winds we had last winter. These anchors are well worth the money.”

Best Buy

Case Magnum 7220 tractor

Andy Lysaght, Napier, New Zealand · Vol. 38, No. 5 (2014), p. 14

“In 2010 we bought a 1994 Case Magnum 7220 tractor used with about 10,500 hrs. on it. It had been worked hard by the original owner, who was a contractor. At about 15,500 hrs. we rebuilt the engine and transmission.

“This tractor has been worth every cent we paid for it. If we want more power we shut the tractor down, reset the fuel screw, and 10 min. later we’re back in action and up 2 gears, with a 6 percent increase in fuel usage and a 30 percent increase in productivity. The job takes only 10 min. in the field with 3 tools. Try to do that with modern tractors and see what it costs.

“The tractor now has about 17,000 hrs. on it, but is more than able to keep working. I had green blood in me until I bought this old tractor. It’s not full of wires and computer plugs, so if we have a problem we can find it and fix it. I wish they made new high horsepower tractors like this.”

Best Buy

Eco-Tector grille

Henry G. Fojtik, Jourdanton, Texas · Vol. 38, No. 5 (2014), p. 14

Henry bought an Eco-Tector grille to protect the EcoBoost Turbo Intake on his Ford F-150 pickup (ph 440 255-4966). The grille is fabricated from 5/16-in., 304 stainless steel (see Vol. 38, No. 2).

“Now my wife and I don’t have to worry about birds, small animals or miscellaneous trash getting into the pickup’s intake system and causing damage. It installs easily using existing tabs on the pickup’s front grille. My wife installed it in less than 5 min. The workmanship is superior. With this grille we don’t have that ugly hole in front to look at. It looks sharp.”

Best Buy

Ram 1-ton pickup equipped

Dominick J. Pellegrin, Cherry Valley, Calif. · Vol. 38, No. 5 (2014), p. 14

“My 2004 Dodge 1-ton pickup equipped with a Cummins diesel engine is the best pickup I’ve ever owned. I’ve used it to pull a 34-ft. fifth wheel trailer and the truck drives like the trailer isn’t even there and still gets 16 mpg. This pickup also has a comfortable ride.”

Best Buy

Ferguson TO30 tractor

Rodney Juntunen, Esko, Minn. · Vol. 38, No. 5 (2014), p. 14

“I bought my 1952 Ferguson TO30 tractor used 30 years ago along with a plow, disk harrow, front-end loader, and pony grader. I use the tractor to skid all my firewood in the fall and to plow snow. It has had only one tune-up in 30 years.”

Best Buy

DeWalt cordless 1/2-in impact + 2 more

Arden Johnson, Scandia, Minn. · Vol. 38, No. 5 (2014), p. 14

“My DeWalt cordless 1/2-in. impact wrench was an impulse purchase, and I wasn’t sure how much I would use it. However, I found it to be surprisingly powerful and very convenient. I use it for many smaller jobs when power isn’t available.

“My Dolmar 6400 chainsaw is a large 4 1/2 hp frame saw that works great for felling large trees. However, for all around use I prefer my Dolmar 5100. It’s a midsize 3.8 hp high speed saw that’s ideal for limbing and felling everything but large trees.

“My Jonserud chainsaw filing guide does an excellent job of sharpening by hand, without removing excess material like power band units do. It has been years – and many cords of wood – since I’ve had a chain sharpened any other way.”

Best Buy

Kubota M4900 tractor equipped + 1 more

David Montalbano, Pollok, Texas · Vol. 38, No. 5 (2014), p. 14

David bought a 2003 Kubota M4900 tractor equipped with a front-end loader used in 2005 with about 300 hrs. on it. “Now it has about 1,400 hrs. and still runs great. It has a lot of power and a smooth shifting transmission. We use the loader with a grapple fork to clear trees and cut brush. After a hurricane hit we used the tractor to operate a pto generator for 2 weeks, 24 hrs. a day. It worked well and was fuel efficient, even under a large load.

“I like my 2009 Kubota ZG327 zero-turn riding mower equipped with a 60-in. deck. I use it to cut about 7 acres of lawn, pasture and roadside ditches. It’s powered by a 27 hp engine runs that great and is easy on fuel. The mower has a low center of gravity and is stable on ditch inclines, with good traction. Also, the engine has plenty of power when mowing thick grass in our pasture. My only complaint is that the grass discharge guard is large and located too low. I tied a rope to the guard that holds it up about 6 to 8 in., in order to discharge the cuttings over a larger area.”

Best Buy

Kubota BX2200 4-WD tractor equipped

Richard Baker, Grants Pass, Ore. · Vol. 38, No. 5 (2014), p. 14

“I like my 2003 Kubota BX2200 4-WD tractor equipped with a hydrostatic transmission and front-end loader. I bought it with a Kubota HR3 rotavator and a 36-in. scraper box with teeth. I’ve used this tractor around my property for cleaning horse manure, mixing compost in the loader bucket, and tilling fire breaks along a fence by our road. No problems and it always starts right up, even in winter.”

Best BuyWorst Buy

Massey Ferguson 390 2-WD tractor + 2 more

Glenn Wise, Elizabethtown, Penn. · Vol. 38, No. 5 (2014), p. 14

Glenn’s happy with his 2001 Massey Ferguson 390 2-WD tractor. “We use this tractor all the time, yet the problems we’ve had with it can be counted on one hand.”

He’s disappointed with his Husqvarna 2-wheeled string trimmer. “In less than 10 hrs. the Briggs & Stratton engine on it lost compression. The company won’t refund my money because the problem was with the engine and not the trimmer. Another problem is that the trimmer wheels are too small and push hard. We ended up buying a Stihl model and it has performed well. It cost more but was a better buy.”

Best Buy

Ram 150 2-WD pickup + 1 more

Don Peer, Roscommon, Mich. · Vol. 38, No. 5 (2014), p. 14

“I’m the third owner of a 1992 Dodge 150 2-WD pickup with more than 224,000 miles on it. I love this pickup. It gets 22 mpg. Last winter I installed a pair of Cooper M&S tires on back, which make a world of difference in the winter. I can go anywhere with these severe weather-rated tires. I highly recommend them.

“My Sears cordless drill came equipped with 2 batteries. When I needed a new battery they wanted $60 for one, which is more than I paid for the drill and batteries combined.”

Best Buy

Massey Ferguson 1745 round baler equipped + 2 more

Ronald Hoffman, Glen Easton, W. Va. · Vol. 38, No. 5 (2014), p. 14

“It works great and is easy to operate,” says Ronald about his Massey Ferguson 1745 round baler equipped with automatic tie. “It picks hay up clean off the ground, makes tight bales, and runs quiet.

“My 1965 Massey Ferguson 50 hasn’t failed me in almost 40 years. I wish they still made this tractor.

“My 1992 Dodge 2-WD pickup equipped with a Cummins diesel engine has more than 222,000 miles on it and still gets 22 to 25 mpg. It has required only minor repairs and always starts right up.”

Best Buy

John Deere LA125 riding mower

Clifford Merinar, Cameron, W. Va. · Vol. 38, No. 5 (2014), p. 14

“My 2010 Deere LA125 riding mower had only 168 hrs. on it when I had to replace the head and valves on the engine, as well as the bearings and shaft on the deck. I also had to replace the fuel pump after oil got sucked up in it because the valves wore out. My lady friend bought the same mower a week before I bought mine, and at 171 hrs. she had to replace the pulleys, shafts and bearings on the deck.”

Best Buy

Stihl chainsaw

Lorn Goede, Viroqua, Wis. · Vol. 38, No. 5 (2014), p. 14

“I like my small Stihl chainsaw with Easy Start. It’s equipped with an additional spring between the crankshaft and the starter rope rotor, which makes starting the saw an easy job. At first my son and nephew called it a ‘girly saw’, but now it’s the first one they grab. It starts right up, cuts fast, and is lightweight and easy to operate.”

Best Buy

Uncle Bill’s Sliver Gripper

Rich Kuntz, Carson, N. Dak. · Vol. 38, No. 5 (2014), p. 14

Rich bought tweezers called Uncle Bill’s Sliver Gripper (ph 800 505-8888; www.duluthtrading.com). “It’s precision-made to dig out slivers of any size, at any depth, in any part of your body. It fits on your keychain so the irritation of a sliver is short-lived. I’ve bought these tweezers for family and friends and they like them, too. Sells for less than $10.”

Best BuyWorst Buy

Stihl 026 Pro chainsaw + 2 more

Terry Morgel, Avon, Minn. · Vol. 38, No. 5 (2014), p. 14

“I had problems with my 2012 Stihl 026 Pro chainsaw. The carburetor had to be rebuilt twice and the clutch also seized up twice. The bar turned blue for lack of chain oil, and I couldn’t adjust the oil flow. After making several trips to different dealers, I traded it in on a Husqvarna 353 Pro. We now have 3 Husqvarnas. They’re great saws.

“I bought a new Sears Craftsman 1 hp 120-volt air compressor in 1973, and I can’t imagine how many hours are on it now. I use this compressor in my shop and have also sprayed many gallons of paint with it. It still has the original V-belt. I’ve replaced the pressure switch twice and made a minor motor repair once. I change the oil and clean or replace the air filter once a year.”

Best Buy

PullRite SuperGlide fifth wheel hitch

Dale A. Cummins, Chattaroy, Wash. · Vol. 38, No. 5 (2014), p. 14

Dale’s impressed with his PullRite SuperGlide fifth wheel hitch (ph 574 259-1520; www.pullrite.com). “It lets me safely pull a fifth wheel trailer with my Ford F-250 Super Duty shortbed pickup. I can back the trailer into tight spots and make tight turns – theoretically up to 90 degrees – without the pickup cab and trailer meeting each other.”

Best Buy

Farmall 1066 tractor

Bob Schmidt, Holdingford, Minn. · Vol. 38, No. 5 (2014), p. 14

“I recently bought a used 1976 Farmall 1066 tractor with cab. I know its history and that it was well taken care of and serviced regularly. I’ve put more than 500 hrs. on it. It starts and runs great and has plenty of power. The engine has never been overhauled but still uses very little oil. I bought this tractor because it’s simple to repair and doesn’t have a lot of electronics like my newer tractor.”

Best Buy

Bad Boy Elite zero-turn riding mower

Leon Bolinger, Stroud, Okla. · Vol. 38, No. 5 (2014), p. 14

“Our 2014 Bad Boy Elite zero-turn riding mower, equipped with a 60-in. deck, has exceeded our expectations (ph 870 648-0050; www.badboymowers.com). It has a real smooth ride and a hydraulic mower deck that makes adjustments a dream. It also has a rollover bar and seat belt. This mower cuts so well that we can mow 10 acres in just a few short hours. We’d recommend this mower to anyone.”

Best Buy

Richland LTD

Kevin Jacobs, West Milton, Ohio · Vol. 38, No. 5 (2014), p. 14

“Several years ago I bought an engine overhaul kit for my Allis Chalmers WD 45 tractor, and when I opened everything up I half expected to see somewhere on the pistons and sleeves what, in my opinion, are the 3 most dreaded words in the English language: ‘Made in China’.

“I can’t tell you how pleased I was when I found out the kit is made in Wisconsin by a company called Richland LTD (ph 608 588-7779; www.richlandengineparts.com). I’ve worked with quite a few engines over the years, and these parts are top notch. I had a couple of questions I wanted to ask, and received a call back from the CEO himself. He’s a great guy. We had a very enjoyable conversation and a few laughs while we were talking, and during the conversation he mentioned that Richland has been around since the 1940’s and one of their first contracts was making pistons and sleeves for the International Harvester Company. That’s a pretty good testimonial that they know what they’re doing.

“So my advice is, if you buy an engine kit, ask them if it has Richland pistons and sleeves. If not, call Richland and they’ll let you know where you can find their products.”

Best Buy

Kubota ZTR-21 zero-turn riding mower

Fred Steele, Chillicothe, Ohio · Vol. 38, No. 5 (2014), p. 15

Fred’s the satisfied owner of a 2006 Kubota ZTR-21 zero-turn riding mower equipped with a 21 hp diesel engine and 60-in. deck. “I used my previous mower to cut 3 acres of grass and it took 3 1/2 hrs. and 2 1/2 to 3 gal. of gas. Now I’m mowing 4 acres, yet it takes only about 45 to 50 min. and I’m using only 1/2 gal. of fuel.”

Best Buy

John Deere 6170M MFWD tractor equipped

Bob Otto, Mapleton, Iowa · Vol. 38, No. 5 (2014), p. 15

A 2013 Deere 6170M MFWD tractor equipped with a Deere 380SL front-end loader rates as Bob’s “best buy”. “Deere’s M series tractors provide everything needed for a livestock operation. You don’t have to pay for technology that’s used only in row crop operations. That results in huge cost savings. The weight distribution of this tractor-loader combination is superior, and the Power Quad transmission with reverse makes feeding chores an easy job.”

Best Buy

Case 440 skid loader

Slade Hartranft, Richland, Penn. · Vol. 38, No. 5 (2014), p. 15

“I love my 2006 Case 440 skid loader. It has a 2-speed transmission and ride control, which is great for making time. It’s also compact and has an 81 hp rating, which makes it drive like a bulldozer. I liked it so much that I bought a used 2007 model with about 1,100 hrs. on it, and it still runs like new. Case really had their ducks lined up in a row for this one.”

Best Buy

Mantis rototiller equipped

Arnold W. Anderson, Aragon, New Mexico · Vol. 38, No. 5 (2014), p. 15

“My 1988 Mantis rototiller equipped with a 2-cycle engine is still going strong. Last year I decided to give the machine a rest and bought a 2013 Mantis 7624 model equipped with a 4-cycle engine. It starts easy and digs great. It’s heavier than the 2-cycle model yet is still a great bargain. I hope to get 25 years out of it, too.”

Best Buy

Ram 250LE pickup + 1 more

Matt Stewart, Seabeck, Wash. · Vol. 38, No. 5 (2014), p. 15

“I bought a 1991 Dodge Ram 250LE pickup from my parents when my dad fell ill in 2004. This pickup had faithfully towed their travel trailer to Arizona from Washington state every year. I’ve used it to haul tractors, firewood, and rocks. Now it has about 170,000 miles on it but still hasn’t needed any major repairs. I expect it to last for many more years.

“I bought my 2012 Bear Cat WT190T wheeled trimmer to use around the edges. Although this trimmer is solid and has a good running Briggs & Stratton engine, the machine totally fails regarding safety. The ends of the factory-provided trimmer line extend 2 in. beyond the safety shield. As a result when the right wheel enters a depression in the ground, the trimmer line digs into the soil showering the operator with dirt, sticks, and rocks. I was hit in the head with a rock the first time I used it, but thankfully I was wearing safety glasses.

“I notified the company about the problem and asked if their engineering department was working on a modification to the shield, but got no reply.”

Worst Buy

Ford F-250 Super Duty pickup equipped

Richard Burch, Clyde, N.C. · Vol. 38, No. 5 (2014), p. 15

“My 2003 Ford F-250 Super Duty pickup equipped with a 6.0-liter Power Stroke engine was the biggest piece of junk I ever owned. It started having problems at about 8,000 miles and was at the dealer a lot. After about 36,000 miles the warranty expired and I had to pay for all repairs from then on. So far, I’ve spent about $15,000. I still have this pickup today and am still paying repair bills. It has about 109,000 miles on it and has never been abused.

“I called the company’s warranty service people but they just said ‘sorry’. I was offered $7,000 for this pickup 2 years ago on a trade. I guess I should have taken them up on it.”

Best Buy

Reed Mfg

Christ Fisher, Ephrata, Penn. · Vol. 38, No. 5 (2014), p. 15

“I wanted a good bench vise, so last year I searched craigslist.com and found just what I was looking for. It’s a No. 206R model made by Reed Mfg. in the 1940’s that has 6-in. jaws and weighs more than 150 lbs. This vise is still in great shape and was built to last. It comes in handy for all kinds of equipment repairs on our farm.”

Best BuyWorst Buy

Ford 2610 tractor + 3 more

Ed Stalcup, Chuckey, Tenn. · Vol. 38, No. 5 (2014), p. 15

“Back in 1983 I bought a Ford 2610 tractor. I’ve used it with a Bush Hog 2346 front-end loader to load oak logs onto my portable bandsaw mill. I’ve also used the tractor with a Hesston 5530 hay baler. I’m well satisfied with this tractor.”

He’s had problems with his 1999 New Holland Boomer 250 diesel tractor. “The fuel injection pump started leaking, but the company won’t provide any parts or information on how to repair it. Their only solution is for me to buy a new pump at a cost of about $1,000. We’ve tried installing many different O-rings with some success, but the pump still leaks a small amount. I think parts for older New Holland machines are too expensive.”

Best Buy

Chevrolet Silverado LT pickup

Gerald Fedler, Fort Madison, Iowa · Vol. 38, No. 5 (2014), p. 15

“It’s the best purchase I ever made,” says Gerald about his 2002 Chevrolet Silverado LT pickup. It’s equipped with a Quadrasteer 4-wheel steering system that’s designed to add stability and improve maneuverability.

“I bought this pickup used from my son, who had bought it new. It has about 170,000 miles on it now with no major repairs. I pull a 20-ft. gooseneck livestock trailer with it, which it handles with no problem. It rides nice, too.”

Best Buy

Fujitsu heat pump

Dennis Boone, Crystal, Maine · Vol. 38, No. 5 (2014), p. 15

Dennis is impressed with his 2013 Fujitsu heat pump (ph 888 888-3424; www.fujitsugeneral.com). “It’s quiet and economical and has lowered my cost for heating oil by 75 percent, while increasing our electricity use only about 30 percent.”

Best Buy

CH4 Biogas

Stewart Martin, Elora, Ont. · Vol. 38, No. 5 (2014), p. 15

“Our biodigester from CH4 Biogas has turned out to be a best buy, but it wasn’t at first. There was a definite learning curve, and we would do some things differently.

“We have a feedlot and a poultry processing facility and needed a way to handle poultry offal and wastewater. Processing it and the manure through a biodigester made sense. The byproduct is a high-value fertilizer that we can spread on our fields. Plus we figured we could use hot water from the generator’s cooling system to heat the poultry plant and 2 homes on the farm.

“We looked at various systems and settled on plans and equipment from CH4 Biogas. Instead of finding someone to handle the installation, my father Earl served as general contractor, thinking he could cut costs. We found firms to do the work, but getting permits was difficult and getting grid connections took a while.

“Although people were interested in the potential of a new industry like biogas, they didn’t want to risk the business they had. This meant our job wasn’t always their priority.

“As general contractors in a fairly new industry, we sometimes found it difficult to source components like the liner CH4 recommended. Because we weren’t sure of the return on the investment, we tried to be cost effective and use lower cost products.

“It has turned out to be a good investment, and we are almost producing more gas than we can use. However, if starting over, we would try to go with top-of-the-line products and experienced venders. We would get a commitment from anyone involved that the project was a priority.

“We would also allow ourselves more time to get things running smoothly. You have to get a feel for the product and where inputs can come from. We source recycled fats from grease traps from 2 companies in addition to the offal and manure. It takes time to understand how to feed the biodigester. If inputs are richer, you don’t have to feed as much. Also, you need to watch the amount of water in the mix.

“We are still learning. It’s an all-inclusive project. If one fuse goes, it can shut down everything.”