Ford F-150 4-WD pickup
What FARM SHOW readers say · 48 Best Buys10 Worst Buys · Trucks & Cars
Ford F-150 4-WD pickup
48 Best Buys10 Worst Buys“My worst buy ever was the first new vehicle we ever bought – a 2009 Ford F-150 4-WD with a 4.6 engine. At 52,000 miles, just 2,000 past the warranty period, the throttle body had to be replaced. At 100,000 miles I replaced all the brake pads for the second time. At 110,000 miles the 4-WD actuator and some of the ball joints failed. At 115,000 miles the front CV joints had to be replaced. At 150,000, the transmission blew up to the extent that the only thing that could be reused was the outer housing. Recently, while replacing the brakes again at 166,000, the mechanic found that two of the ball joints were bad again and that the springs on the struts were broken and needed replacement. He said he was surprised Ford didn’t have a recall on them because he replaces so many of them. On top of all this, the cab, box and tailgate are rusting out and we only get 15 to 16 mpg. I’ve spent more than $15,000 on repairs.”
He’s had problems with the Integrated Wheel End (IWE) system on his 2014 Ford F-150 4-WD pickup. The IWE system is designed to lock and unlock the front hubs when the driver changes back and forth between 2-WD and 4-WD.
“However, if there is the slightest leak in the IWE system there’s not enough vacuum to fully disengage the 4-WD. That results in the actuator gears stripping, and then the hubs won’t disengage or engage properly. It’s a very bad system,” says Andy. “The company offers a kit to fix the problem but it costs $150. My advice is, don’t buy a Ford pickup equipped with the IWE system.”
He owns a 1999 Ford F-150 4-WD extended cab pickup with 236,540 miles on it. “We change the oil and lube this pickup every 4,000 miles or so. We’ve never replaced the antifreeze, transmission oil, power steering fluid or freon, yet there are no signs of any problems. We did replace the starter and alternator.”
“I like my 2008 Ford F-150 4-WD crew cab pickup equipped with a 5.4-liter engine. It has about 88,000 miles on it and is on its second set of tires. It’s the best Ford pickup I’ve ever owned.”
“My 2014 Ford F-150 4-WD pickup has a very comfortable ride, and I like the rear view camera and tailgate ladder. Also, the rear doors and seats are comfortable and easy to get in and out of. It has a 5.0-liter engine that gets about 19 mpg.”
“I put about 300,000 miles on my 1990 Ford F-150 4-WD pickup equipped with a 300 cu. in., 6-cyl. engine, without ever touching the engine. When the odometer reached 100,000 miles the front seal started dripping about a quart of oil every 3,500 miles, but the leak never got any worse. I sold the pickup to someone who has put another 100,000 miles on it, again without touching the engine.”
“I own a 2012 Ford F-150 4-WD pickup equipped with a 5.0-liter engine. It rides great and is reasonably fuel efficient.
“My Kubota 30H 4-WD loader tractor is a real workhorse.”
On the “worst buy” side, he lists his 2007 Honda Odyssey minivan. “I had problems with the brakes locking up on the highway, and with the brake lights. But the biggest problem was an electrical one. Without warning, the battery would suddenly go completely dead. Three batteries later I finally traded this vehicle.”
“My 2005 Ford F-150 4-WD pickup, which I bought used, has plenty of power and is fuel efficient. Overall, I like it. However, the electronic shift on the transfer case is a joke. It almost takes an act of Congress to get it into 4-WD. Otherwise it’s a good pickup.”
“I like my 2011 Ford F-150 4-WD pickup which is equipped with an EcoBoost 6-cyl. engine. I’ve always been a Ford truck owner and used V-6 engines, but after reading about the EcoBoost engine I decided to buy one. It’s all that they advertise. It has great torque at low speed and gets good mileage even when pulling a heavy load.”
“I bought a used 2007 Ford F-150 4-WD crewcab pickup with about 48,000 miles. It rides smooth and quiet and the stereo has an incredible sound. It can haul a cord of wood in the bed while pulling a car trailer with an 11,000-lb. load.
“In 2010 I got a Sears Craftsman cordless drill as a Christmas gift. The batteries don’t hold a charge and the drill chuck won’t tighten up enough to keep from slipping. New batteries are as expensive as the drill and don’t keep a charge for more than 15 min. The loss of power gets frustrating when I’m working on a job away from an electrical outlet. I bought a new charger thinking that would solve the problem, but it didn’t.”
Gary’s happy with the 1996 Ford F-150 4-WD pickup he bought used equipped with a 302 cu. in., V-8 engine and automatic transmission. “I bought this pickup with about 112,000 miles, and now it has more than 346,000 miles with no major problems. I’ve replaced the starter, alternator, and fuel pump. It still uses only about a quart of oil every 2,000 miles. Not bad for a $1,200 buy.”
“My 2010 Ford F-150 4-WD pickup equipped with a 5.4-liter gas engine is my worst buy. It has about 20,000 miles on it. The rear end went out once and the brakes have had problems. This pickup rides on Goodyear Wrangler tires, two of which had to be replaced because of separated belts. The computer says the pickup is getting 14.4 mpg, but I think that’s a stretch. Now I’ve put it up for sale.
“I like anything Deere. I have ¿ ve tractors, a sprayer, a combine, a riding mower, and several large implements. No problems with any of them.”
“I’ve owned more than 25 new pickups in the past 50 years, and this one is the best yet,” says Robert about his 2009 Ford F-150 4-WD crewcab FX4. “It has about 34,000 miles on it. The ride, drive, gas mileage, pulling power, visibility, comfort and handling on it are fantastic.”
“I like shopping at Tractor Supply Company. It’s a small store so I can get in and out quickly. They sell good stuff at a good price and provide excellent customer service.
“My Deere Gator is a best buy. I have no idea how I ever got by without it.
“My 2002 Ford F-150 4-WD pickup works great. It’s equipped with a V-6 engine and a 5-speed manual transmission. The seal on the slave cylinder went out. It would have been an expensive 10-hr. repair at the dealership. Instead, I pulled the engine out and did the work myself in only 5 hrs.”
“I like Shark Bite plumbing connectors (ph 800 518-5388; www.sharkbiteplumbing.com). I used them when I had to replace a shower valve in a spot where it would have been difficult to resolder the copper piping. These couplers just slip on the ends of the pipe to connect, and that’s it. Once pushed to the proper depth, you’re done; no extra parts, soldering or tools are required. These connectors are kind of expensive, but the time and trouble you save is well worth it in emergency situations.
“My 2005 Ford F-150 4-WD pickup is my worst buy. At only about 20,000 miles the reverse gear went out, but the 3-year warranty had expired. I’m pretty sure the service manager spewed coffee on his computer screen when I suggested that Ford help with the repair. I live in a remote area of Alaska where the closest dealer is 400 air miles away. I ended up paying for the repair.”
“This pickup just keeps on running,” says Howard about his 1993 Ford F-150 4-WD model. “It has about 60,000 miles on it yet the transmission, alternator and starter are all original. The engine never uses more than a half quart of oil between oil changes.”
“My 2005 Ford F-150 4-WD crew cab pickup rides like a car and gets a reasonable 16 mpg.
“I’m also happy with my 2004 Deere 8120 MFWD tractor. It’s fuel efficient and comfortable to drive.”
Mark’s impressed with his 1991 Ford F-150 4-WD pickup equipped with a 300 cu. in., 6-cyl. engine and a 5-speed manual transmission. “It has more than 170,000 miles on it and has been a really good pickup. When I put the transmission in low range, the computer keeps it going at a constant speed - even while I’m hauling 90 small square bales and a hay loader on my trailer - without ever having to touch the accelerator.”
“My 1992 Ford F-150 4-WD pickup equipped with a 351 cu. in. engine and automatic transmission is my worst buy. I started having problems with it the day I took delivery. Whenever I tried to use the windshield wipers I’d hear static on the radio. Another problem was that I had to replace three timing chains and the company would only pay for one. Also, the paint failed and the company wouldn’t help out. The seat covers had to replaced twice and are still bad. The dealer told me the problem with the seat covers was that I didn’t get in and out of the pickup correctly. Also, the engine slugged up so bad that the oil pump had to be replaced twice.”
“My Ford 1210 tractor equipped with a front-end loader and backhoe is a best buy. I bought it used 10 years ago and it has saved me a lot of work. I use it around our yard to plant trees and do other small jobs. It still runs good and has a lot of power for its size. It’s also easy on fuel and small enough to get in tight places. I also use this tractor to do some work for my neighbors.
“My 1999 Ford F-150 4-WD pickup equipped with a 5.4-liter engine is my worst buy. At about 45,000 miles the right cylinder head gasket started leaking oil at the rear of the engine. I talked to six service managers at Ford dealers in northern Utah and southern Idaho and learned that this leakage is a common problem in the 4.6 and 5.4-liter engines. It’s caused by shoddy work in the manufacturing process. Metal chips left on the block or head aren’t cleaned off and when the head gasket is installed, the chips keep the gasket from sealing and in some cases damage the head. The oil leak is usually at the right rear, left front or both heads on the engine. How hard is it to clean the head and block before the engine is assembled? Ford hasn’t been able to do it in six years. I let my neighbor, a fan of Dodge, read Ford’s service bulletin 02-22-7 and his question is, if the chips are on the block and head why wouldn’t they be inside the engine also?
“Ford’s recommendation is to pull the engine before removing the heads so the heads won’t get damaged during removal from the engine. Two dealers I talked to won’t replace the gaskets unless new heads are installed. Labor, two new heads, the gaskets, recharging the air conditioner, etc., put the cost at about $3,000.
“When I called Ford and filed a complaint, I asked why they sent pickups out knowing they had defects in them. Their reply was that it doesn’t make any difference if the pickups leave the factory with defects because if they fail during the warranty (three years or 36,000 miles) they’ll fix it - after that it’s the owner’s problem. This is how Ford expects to reach their goal of 100 percent customer satisfaction. My position is if the truck leaves the factory with defects, Ford should fix it, under warranty or not under warranty.
“The people at Ford think they can send their pickups out with defects in them and after the owners get stuck with a huge repair bill they’ll buy another one of their junkers. Not me, I’ve been driving Ford trucks since May 1967 but I wouldn’t buy another one if they were having a two-for-one sale. Besides, if you pay $30,000 for a pickup and it can’t run more than 45,000 miles, why would you want another one?”
Lynn likes his 1994 Ford F-150 4-WD pickup equipped with a 302 cu. in., V-8 engine and automatic transmission. “I bought it used with about 35,000 miles on it. Now it has more than 102,000 miles and is still going strong. It gets about 16 mpg. I replaced the radiator at about 100,000 miles.”
“My 2001 Ford F-150 4-WD pickup has about 23,000 miles on it and has worked flawlessly. It requires only regular maintenance and drives and rides great.”
“My 2000 Ford F-150 4-WD pickup is my worst buy. It steers hard, which makes it difficult to stay on the road. I took the pickup back to the dealer at 12,000 miles to have the tires aligned. However, the warranty didn’t cover alignment work so I had to spend $44 of my own money. The dealer put 45 to 50 lbs. of air pressure in the tires, but it didn’t help. One week later I took the pickup to another dealer and had to spend another $44 for another alignment. This dealer let air out of the tires. It helped some, but it’s still hard to keep the pickup on the road.”
“My 1989 Ford F-150 4-WD pickup equipped with a 4.9-liter 6-cyl. engine and 4-speed manual transmission is my best buy. It has almost 100,000 miles on it but the brakes are still in good shape. We’ve used it to pull wagons and tractors and to haul hay, etc. It still runs great and doesn’t use any oil.”
“I bought my 1978 Deere 4240 tractor used when it was seven years old and it’s my best buy. It has more than 9,200 hours on it . The only major repairs have been to the crank bearings and ring pump. This tractor seems to have more power now than when it was new.
“My 1978 Ford F-250 4-WD pickup equipped with a 351 cu. in. engine is a best buy. I bought it used when it was two years old. It has more than 210,000 hard miles on it and the engine has never been overhauled.
“I bought my 1990 Ford F-150 4-WD pickup used when it was six years old and it’s my worst buy. The pickup’s 302 cu. in. engine is underpowered, even though it has electronic fuel injection and this a lighter truck. It used more fuel and had more problems than my 1978 Ford F-250. I finally replaced it with a 1994 Chevrolet equipped with a 350 cu. in. engine. This model has much better performance and economy.”
Elmer’s impressed with his 1998 Ford F-150 4-WD pickup equipped with a V-6 gas engine and 5-speed transmission. “I like the engine and transmission, and also being able to shift into 4-WD on-the-go. If I see a spot of ice on the road ahead of me I can quickly shift into 4-WD so I won’t slip.
“My worst buy is a Dayton 1/3 hp electric motor that I tried using to power a small fan. The motor didn’t have enough power to start the fan, and the company wouldn’t do anything about it.”
“I bought my 1988 Deere 4650 MFWD tractor used with 200 hours on it. It’s my best buy. It now has more than 6,400 hours on it and still runs like new. It has needed only a few minor repairs. I really like the front wheel assist and don’t know how I ever got along without it in the past.
“My 1996 Deere 8300 MFWD tractor equipped with a 200 hp engine and 16-speed Powershift transmission is a best buy. It performs well and has a quiet cab. My only complaint is that it has a lot of electronics and if something goes wrong with that, I can’t fix it at all. I have to call for a service mechanic to trace down the problem and repair it. My father and I have run Deere equipment for over 40 years and really feel that ‘Nothing Runs Like A Deere’.
“My 1993 Ford F-150 4-WD pickup equipped with a 302 cu. in. engine and 4-speed transmission is my worst buy. This pickup has really soured me on Fords. It’s underpowered and gets a horrible 10 mpg without pulling a load. I can’t start out in second gear without having to rev the engine to at least 1,100 rpm’s. Otherwise the engine will kill. I won’t buy another Ford again.”
A mid 1990’s Haybuster Rock-Eze rock picker rates as Bill’s “best buy”. “This machine runs off tractor hydraulics and works great behind a small tractor. I use a series IV D17 Allis-Chalmers tractor to pull it. I use it mostly to ‘spot pick’ rocks in the field. It combs the surface without tearing the seeds out of the ground so we can use it after the crop is planted. I wouldn’t want to farm without it.
“We’re well pleased with our 1997 Ford F-150 4-WD pickup. It rides good and handles great and has been trouble-free. It rides so nice that my wife and kids often drive it instead of our car. We especially like the ‘shift-on-the-fly’ 4-WD engagement option.”
“I bought my 1988 Ford F-150 4-WD pickup used. I had to make some repairs to the engine and front end. Otherwise, this pickup has worked great. It has well more than 100,000 miles on it.”
“I’m pleased with the comfort and quiet ride on my 1999 Ford F-150 4-WD pickup. I use it regularly to make trips to farm land 200 miles away.
“I’m impressed with my New Holland TN55D tractor. I especially like the cab’s roominess and ease of entry since I’m tall and getting a little stiff with age. The cab on this tractor is far superior to the cabs on other tractors of similar size.”
“My 1997 Deere 6 by 4 Gator has been absolutely trouble-free and is my best buy. It starts the first time, every time, no matter how cold the weather is. It’s the perfect machine for getting in and out of a woodlot to cut firewood, especially in wet conditions. It’ll haul a half face cord of wood at a time.
“My 1999 New Holland 1920 4-WD tractor equipped with a Great Bend front-end loader is a best buy. It’s a real workhorse for its size. The 12 by 12 transmission was well worth the extra cost.
“My 1995 Ford F-150 4-WD pickup equipped with a 300 cu. in. 6-cyl. engine and a 5-speed transmission is a best buy. It’s a very reliable truck. The only problem I’ve had is with the cheaply-built oil pan. At 57,000 miles, the threads are bad so it will have to be replaced.
“My three Husqvarna chainsaws - models 51, 254, and 268 - are also best buys. They’ve never let me down.”
“My 1998 Ford F-150 4-WD pickup has been totally dependable. It has more than 26,000 miles on it with no trouble at all. It rides like a luxury car.”
Forest likes his 1998 Ford F-150 4-WD pickup with Goodyear tires. “I do a lot of driving and already have 60,000 miles on the pickup. I’m impressed with the Goodyear tires – they’re still holding up well. My other three pickups had General tires which generally weren’t good for more than about 12,000 miles.
“My 1966 Deere 4020 tractor equipped with a diesel engine is a best buy. It has a whopping 23,000 hours on it. I overhauled the engine at 7,000 hours and again at 16,000 hours. Two years ago I bought a 20-ft. Bush Hog mower to use with it. I’m well pleased with both the mower and the tractor. Even though the tractor is 34 years old, it pulls the mower very well. I mow 800 to 1,000 acres every year.”
“I like my 1996 Ford F-150 4-WD extended cab pickup. It handles nice and the 350 cu. in. engine has a lot of power and has been trouble-free. It rides nice and is a beautiful pickup.”
“I bought it with 8,000 miles on it. Soon after, I traveled 3,300 miles through ice, snow and cold in the Rocky Mountains and averaged 16 mpg,” says James about his “best buy” 1996 Ford F-150 4-WD pickup. “It handles as well as our Lincoln Town Car.
“I also added a remote auto start, which turned out to be a real convenience. It lets me start the truck from my kitchen or motel room.” (DesignTech International Inc., 7955 Cameron Brown Court, Springfield, Va. 22153; ph 703 866-2000).
Keith’s “worst buy” was his 1989 Jeep Commanche 2-WD pickup. “I should’ve known that I was in for a rough ride when the oil pan rotted out and the seals went out on the rear axle before the truck was even two years old. At about 40,000 miles the syn-chronizers started to go out in the transmission.
“Shortly after the power train warranty had expired, the valve lifters started to rattle in the engine. At about 60,000 miles I put new brakes on the truck. None of the parts were available from a jobber so I had to buy all the parts from Chrysler. The front rotors cost me $100 apiece and the total brake job cost almost $700. The real killer, though, was when the sides on the bed started to rust out. It was a nightmare trying to get Chrysler to back up its 7-year/100,000 mile rust perforation warranty.
“I drove the truck for seven years and put 84,000 miles on it before trading it in on a 1996 Ford F-150 4-WD. The Ford dealer allowed me $650 for the Jeep and I can’t blame him.”
“I like my 1996 Ford F-150 4-WD pickup. It has more than 40,000 miles with only regular oil changes.”
Glenn traded his International 1480 combine in for a 1995 Case-IH 2188 model which is his “best buy”. “It has more horsepower and hydraulic capacity than the 1480 so the header raises faster. Also, the hydrostatic drive transmission doesn’t slip as much and the sieves and fan have more capacity. “One of my worst buys ever was my 1990 Ford F-150 4-WD pickup equipped with a 6-cyl. engine. Every time I started out I had to rev the engine way up and slip the clutch or the engine would die. The paint peeled off and the dealer said the company would pay to have it repainted. However, they didn’t.”
Russell’s pleased with his 1997 Ford F-150 4-WD extended cab pickup equipped with 4.6 liter V-8. “It performs well and gets good gas mileage,” he says. “The third door is really convenient.”
“My 1995 Ford F-150 4-WD pickup is the nicest vehicle I’ve ever owned. It has a quiet, smooth ride and the automatic transmission shifts smooth. The 351 cu. in. engine has a lot of power but could be more fuel efficient. “My 1996 Deere 535 round baler, coupled with my Deere 7800 MFWD tractor equipped with a powershift transmission, is a pleasure to operate. Makes solid bales that weigh twice as much as the ones we made with our old Deere 510. I really like the net wrap. Holds prairie hay together and virtually eliminates spoilage.”
“I’m well pleased with my 1997 Ford F-150 4-WD pickup equipped with a 4.6-liter V-8 gas engine. It gets 16 to 18 mpg and rides and handles like a car. “I also like my 1994 Deere 4760 MFWD tractor. It handles well and is fuel efficient.”
“I use my Crustbuster 15-ft. 10-in. hoe drill to plant soybeans and milo in six 30-in. rows and also to plant wheat, oats, and alfalfa. No problems. My neighbors often borrow it. “I’ve used my 1987 Gleaner 65 C-2 combine to cut about 400 acres a year for the past nine years. Very few problems. “I like my 1978 Ford F-150 4-WD pickup which I bought used nine years ago. It has 197,000 miles on it but the 400 cu. in. engine is only now starting to use a little oil - a quart every 500 or 600 miles.”
Owen’s “best buy” is his 1997 Ford F-150 4-WD pickup. “The 6-cyl. engine has a lot of power and it rides nice, and we like the new look. However, we wish it were available with more choices of color.”
Howard’s the satisfied owner of a 1995 Ford F-150 4-WD pickup equipped with an in-line 6-cyl., 4.9-liter engine. “It’s easy on fuel, has a lot of power, looks good, and was priced lower than many used Chevy and GM pickups that I checked out.”
Myles owns a “best buy” 1996 Ford F-150 4-WD extended cab, short box pickup equipped with a 352 cu. in. engine and 4-speed automatic overdrive transmission. It’s his “best buy”. “I tested a lot of other pickups before I bought it. Dodge tried to talk me into buying a Dakota in order to save on gas, but the difference between driving the Ford and Dodge models I tested is like the difference between driving a Cadillac and a Volkswagen. I also have a Dodge Caravan. It’s a nice minivan but it has terrible road noise, especially compared to my Ford pickup. The pickup also rides better than the van.”
“It rides comfortably and has a lot of power,” says Alfred, pleased with his 1993 Ford F-150 4-WD pickup equipped with a 302 cu. in., V-8 fuel-injected engine. “My Westfield 10-in. dia., 61-ft. long grain auger is a real grain eater. It has hydraulic lift so it’s easy to set up and take down.”
“I’m well satisfied with my 1994 Ford F-150 4-WD pickup equipped with a 6-cyl. engine and 5-speed manual transmission. It rides and drives well and has a lot of power. It’s also fuel efficient and consistently gets 15 to 17 mpg. I’ve put 12,000 miles on it with no problems. The clear coat finish is easy to clean and looks good.” On the “worst buy” side, he lists Firestone ATX radial tires. “The tires were original equipment on my 1992 Ford F-150 4-WD pickup which I bought new. They lasted only 10,000 miles - the steel belts separated on three of the four tires. I replaced them with B.F. Goodrich mud terrain radial tires which I really like. They have 25,000 miles on them and I’ve never had a flat tire.”
Kenneth H. Ferguson, Riceville, Iowa: “T like my 1989 White 100 FWA tractor. It has 2,000 hours on it. I had some problems with the fuel injector pump at first, but the company promptly solved the problems. “A wheel bearing went out at 19,000 miles on my 1989 Ford F-1504-WD pickup. The company and dealer said the bearing wasn’t part of the drive train so it wasn’t covered by the warranty. I had to pay for the repair myself. Then the paint started falling off and the dealer wouldn't do anything about that, either. made several phone calls to the company. They hung up on me two different times. I traded it in for a 1994 Dodge pickup. I love it.”
Pete Lamp, Kendallville, Ind.: Pete has 20,000 miles on his 1992 Ford F-1504-WD pickup equipped with a 4-speed transmission and 300 cu. in. 6-cyl. engine. “I’m well pleased with it, Last winter we hada spell of 20 below zero weather but it never failed to start. It’s had only a couple of minor problems which were promptly handled by my dealer.”
Bob McComb, Castleton, Ontario: Bob’s the owner of a 1991 Ford F-150 4WD pickup. “I'm generally satisfied with it, but there seems to be a problem with the auto-hubs or transfer case. Both were replaced under partial warranty.”
Bill Wagoner, Emden, Ill..: Bill’s 1991 DMI field cultivator and spring tine harrow heads his “‘best buy” list. “The field cultivator goes through heavy residue without plugging. It’s built strong and should last for years. Every moveable part has a grease zerk on it. We had a couple of minor problems which the company solved promptly. It does a good job and stays in the ground.” Harvey R. Wirkler, Farmersburg, Towa: “It rides well and is fuel efficient,” runs like new,” says Harvey, pleased with his 1991 Ford F-1504-WD pickup equipped with a 302 cu. in. V-8 engine. “I’m well pleased with my 1991 Case-IH 7140 tractor and with my DMI wagons.”
Edwin Surface, Waynesville, Ohio: A 1991 Deere 265 garden tractor equipped with a 46-in. mower deck rates as Edwin's “best buy”. “Ithas almost 200 hours and still works great. However, I have to clean out wet grass from under the deck occasionally. I really like the hydrostatic transmission. I'd prefer that the engine didn’t automatically stop whenever I leave the seat, but that’s typical of government regulation,” Wes Suddarth, Lebanon, Tenn,; “It has 104,000 miles with very few problems,” reports Wes, pleased with his 1981 Ford F150 4-WD pickup equipped with a 300 cu. in. 6-cyl. engine. “My total repair bill over 12 years has been less than $400 (water pump, starter, new brakes, etc.). “My 1992 Bush Hog 15-ft. rotary cutter is easy to maintain and works great.”
Charles H. Ries, Shellsburg, Iowa: “This is the worst manure spreader I’ ve ever seen,” says Charles, owner of a 1986 New Idea 213 model. “The second load we hauled one of the big rear wheels fell off with the spreader loaded. The beater drive chain is built too lightand the unloading chain keeps breaking. Chain guides on the unloading chain have worn through and much of the tin is rusted out. “My 1990 Ford F-150 4-WD pickup has lots of power and does a good job of pulling our livestock trailer. It handles well. However, it could use a slower reverse gear.” Victor Kimberling, Mechanicsville, Iowa: Victor's impressed with Rawson’s one-passzone-till planting system (Rawson Farms, 7413 North Nottawa Road, Farwell, Mich. 48622) that consists of a pair of 2-in. fluted coulters mounted on a toolbar at the front of a planter, one mounted on each side of the row. One coulter is positioned a few inches ahead of the other. The two coulters till a strip 6 in. wide through otherwise undisturbed residue. “The coulters have a rugged design and work as well as advertised. I had the opportunity to listen to Ray Rawson and Don Schiefer, an agronomist, explain the system and dynamics of crop growth. I received Schiefer’s book “Tillage in Transition” recently as an unannounced 14° FARM SHOW tS bonus after the purchase. This approach of continued service and further education of customers is refreshing.”
John Vosta, Milford, Neb.: John’s happy with his 1990 Ford F-150 4-WD pickup. “I’ve owned this pickup for 18 months now and it has never been in the shop. It didn’t even have any minor problems that usually occur with a new vehicle, It has 20,000 miles on it now.”
William Grindey, Apple River, Ill.: “My 1987 General Motors 1/2-ton 4-WD pickup was a piece of junk from the day I bought it. The 305 cu. in. fuel injected engine never did start or run well. It went through two starters, the ring gear and head gasket had to be replaced, and the paint job was terrible, Neither the company nor the dealer were very helpful. I traded it for a 1988 Ford F-150 4-WD equipped with a 302 cu. in. engine. It burned too much oil, but between the company and the dealer the problem was fixed. It’s surprising what a dealer can do for you if they want.”
Randy Roquette, Baldwin, Wis.: Randy likes his 1985 Ford F-150 4-WD pickup equipped with a 300 cu. in, engine and 4speed transmission,
Robert Winters, Strasburg, Penn.: “My 1989 Ford F-150 4-WD pickup handles —well, but gets only 10 to 12 mpg.”
Duane Forslund, Hawarden, Iowa: Duane likes his Allis-Chalmers 782 chopper. “Excellent reliability, low maintenace cost, good performance and capacity.” Leland Klinger, Pecatonica, Ill; Leland has had bad luck with his 1986 Ford F1504-WD pickup. “Once you start it, it dies three or four times before you can even move it unless you hold the throttle half open. It’s totally dead going uphill and has no power atall. The XL trim fell off before the pickup had 3,000 miles. The dealer replaced it but the new trim also fell off, It gets only 8 mpg. I bet I' ve been to the dealer 20 times to solve the problem, but so far all they’ ve done is set the timing. asked them to look at the transmission, which slips constantly, and install a new carburetor, but they did nothing except wait for the guarantee to run out and it did. put on 5,000 of the first 6,000 miles going to the dealer - 60 miles round trip.”
Own a Ford? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.