Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Brands › New Holland

New Holland: what farmers say

694 reports in FARM SHOW · 590 Best Buys109 Worst Buys

New Holland (general)

147 Best Buys14 Worst Buys
Best Buy
Vernon Weber, Herington, Kan. · Vol. 24, No. 4 (2000), p. 15

“I like my 1998 New Holland 14-ft. Hydro Swing swather. It developed a minor break which the dealer promptly took care of.”

Best Buy
Marvin R. Patterson, Shelbyville, Ky · Vol. 20, No. 5 (1996), p. 16

“I like my 1994 New Holland and 1995 Badger variable speed discharge silage wagons Both are built by Badger and both work great. They’re identical except that they have different tops. I like the top on the New Holland model better because it’s built stronger and handles tree limbs better. “My Patz 40-ft. inclined conveyor is built solid but I’ve had problems with it from the start. It had a poly bottom that I had to remove, the chain often broke, and it didn’t run smooth. I used it only for about two years.”

Best BuyWorst Buy
Dennis Poulsen, Snowville, Utah · Vol. 19, No. 5 (1995), p. 16

Dennis Poulsen, Snowville, Utah: “We've had tremendous problems with our D-2000 Ford-New Holland big square baler and we haven't been able to get any satisfaction from the company,” says Dennis. “Pm a commercial hay producer and the reason we bought this baler was because it makes smaller 3 by 4 by 8-ft. bales that weigh about 1,300 Ibs., which lets you get more bales on the same amount of semi trailer space. The problem is that the baler has never worked right from the beginning. I can’t get enough weight into the bales and it's supposed to tie with 5 strings but we're lucky if we get 4 and it’s usually 3. Hay buyers aren't too impressed when they look at your bales and a third of them are broken apart. “This is the second D-2000 I’ve had. Ford-New Holland replaced the first one but now they won't do anything. I know personally of one commercial grower who turned two of these balers back over to Ford and I’ve heard of others. This baler is no longer in production. I’ve been a long-term ‘Hay buyers aren't too impressed when they look at your bales and a third of them are broken apart.” Ford customer - pickups, tractors, and a lot of other equipment, I didn’t think I'd have a problem with the company but I'm very disappointed with this situation. This baler doesn't work and think the company knows it. But they won't help.”

Best BuyWorst Buy
David Proden, Ladysmith, Wis · Vol. 19, No. 2 (1995), p. 14

David Proden, Ladysmith, Wis.: A 199] Ford 8730 tractor and a 1993 Deere discbine are two of David's best buys. “The tractor has a transmission that’s a dream to shift and the cab is comfortable and quiet. The discbine is a dandy. I can go as fast as I want, and the impellers dry hay just as good as rollers or better. “My worst buy was a New Holland Hydro haybine that I bought new in 1993 for $14,000. I used it to cut 130 acres of hay and couldn’ t keep it from plugging up. My dealer tried to fix it but couldn't. He called experts at New Holland who came out one day and told me the machine wouldn't cut my hay but couldn't figure out why, They were prepared to give me my money back, but apparently some of the company brass thought differently. had to keep after the company - one official even had me investigated for some reason - for nine weeks before I got my money. Then, I got only $13,500 back because, the company argued, I'd cut hay with the machine. That's the last piece of New Holland equipment I'll ever buy.”

Best Buy
David Nobbe, Barrington, Ill · Vol. 19, No. 1 (1995), p. 15

David Nobbe, Barrington, Ill: “My worst buy is the Case-IH 8530 baler bought new last year. was replacing my 10-year-old New Holland 316 with the Case. In the 10 years I owned the New Holland I didn’t go through one bag of shear pins. I've used three bags of shear pins since I bought the Case. I spend as much time unplugging the baler and replacing shear pins as I do baling.”

Best Buy
Duane Sapp, Eau Claire, Wis · Vol. 19, No. 1 (1995), p. 15

Duane Sapp, Eau Claire, Wis.: A 1993 New Holland Hay Invertor is Duane’s best buy. “It turns hay over without knocking all the leaves off because it picks it up and inverts it, instead of beating down on it to roll it over, like a side delivery rake.”

Best Buy
Donald Beyer, Breckenridge, Minn. · Vol. 18, No. 2 (1994), p. 16

Donald Beyer, Breckenridge, Minn.: A 1993 Ford New Holland combine rates as Donald’s “best buy”. “It threshes clean and has a lot of capacity.”

Best Buy
Chester Palmer, Miami, Okla. · Vol. 18, No. 1 (1994), p. 16

Chester Palmer, Miami, Okla.: “It lets us bale hay in a few hours instead of a few days,” says Chester about his New Holland hay tedder (fold-up model). “It helps us dry eee ho ee orst Buys vious page) outrained-on hay before itcan mold and has saved us a lot of hay that would have been lost.”

Best Buy
J. Earl Anglen, Riverton, Wyo. · Vol. 18, No. 1 (1994), p. 16

J. Earl Anglen, Riverton, Wyo.: He's pleased with his Lester 40 by 64-ft. pole building. “We use it as a garage, storage shed, and shop. Ithas two 10-ft. wide, 14-ft. high sliding doors on one end and two rollup doors for cars and trucks on the other end. There’s plenty of room for vehicles, tractors, and shop tools. It’s completely insulated and has 20-ft. wide concrete approach pads, It’s an attractive building and useful, too. I'd recommend it to anyone. “My 1992 New Holland 1118 haybine windrower is a fine machine. My only complaint is with the foot valve that raises and lowers the header. To raise it have to push down a lot harder than I did with my old New Holland 912 windrower, Other owners of New Holland windrowers in this area all like their machines. They’re dependable and don’t require much maintenance.”

Best Buy
Arthur Timmel, Collins, N.Y. · Vol. 16, No. 4 (1992), p. 12

Arthur Timmel, Collins, N.Y.: “My 1991 Case-IH 1840 skid steer loader is handy. I use a bucket and set of pallet forks with it. It starts and runs good. The only problem I have is with the pallet forks. They can’tbe locked into place to keep them from going sideways when I turn, [should be able to lock them into position like on New Holland and Bobcat models, Otherwise it’s far superior to them.”

Best Buy
Amos Z. Sensenig, New Holland, Penn. · Vol. 16, No. 3 (1992), p. 14

Amos Z. Sensenig, New Holland, Penn.: Amos is pleased with his 1991 GM Sierra _ pickup equipped with a 305 cu. in, V-8 engine and 4-speed transmission. “It works just fine. It’s a best buy.”

Best Buy
Lorne Hanson, Torquay, Sask. · Vol. 13, No. 6 (1989), p. 12

Lorne Hanson, Torquay, Sask.: “The rotor could use more power, and it could have larger tires, heavier rims, and improved controls,” says Lome about his 1981 New Holland TR 85 combine. “It does an excellent job of threshing with little grain loss or cracked wheat. I like the grain tank monitor because ittells me when the hopper is full, However, the rock door is poor. It opens for weeds, but not for rocks which have caused up to $8,500 in damage to the rotor.”

Worst Buy
Corwin Whitworth, Inkom, Idaho · Vol. 13, No. 6 (1989), p. 14

Corwin Whitworth, Inkom, Idaho: Corwin says his “worst buy” is his 1985 Versatile 956 tractor. “I’ve broken six differential axle housings so far, as well as the main frame. The flex coupling went out, the hinge pins and steering rams had to be replaced. Ford-New Holland says I’m the only one with these problems.”

Best Buy
Scott Miller, Elsie, Mich. · Vol. 13, No. 6 (1989), p. 14

Scott Miller, Elsie, Mich.: “My 1982 New Holland TR 85 combine does an excellent job of harvesting if I can keep it out of the shop. It's built too light for everyday use.”

Worst Buy
Edward Thomas, Mayo, FL · Vol. 13, No. 5 (1989), p. 14

Edward Thomas, Mayo, FL: A 1987 New Holland model 900 silage chopper is Edward's “worst buy”. “The feed roll shields and blower blades broke, and the feed roller housing spread apart. Now the magnetic header drive clutch has to be replaced.” Edward's “best buy” is his 1986 Butler Oswalt mode! 820 ensiler.

Best Buy
Dennis Bryant, Poplar Grove, Ark. · Vol. 13, No. 4 (1989), p. 12

Dennis Bryant, Poplar Grove, Ark.: Dennis nominates his Deere 530 round baler as his “best buy”. I’ve used Claus, International, and New Holland round balers, but this one is the best yet.”

Best Buy
Jeffrey Rash, Bristol, Va. · Vol. 13, No. 3 (1989), p. 14

install, "It warms air outside the house, then blows it into the home through a windowmounted duct. We use it to heat our entire house. It sets outside so there’s no mess in the house and we don’t have to pack wood into the house as it’s piled near the stove. The outside temperature can be below zero and our house will be 76°.” Jeffrey Rash, Bristol, Va.: Jeffrey-says his “best buy” is his 1988 Vermeer 5051 round baler. “Vermeer makes the best round baler on the market and it produces the lightest and best looking bales. I've used a New Holland round baler and there’s no comparison.”

Best Buy
Roger Radloff, Oshkosh, Wis. · Vol. 13, No. 2 (1989), p. 14

Roger Radloff, Oshkosh, Wis.: “My 1986 Deere AMT 600 5-wheeler is handy, trouble-free and gets good mileage. I built a front towing bar on it so I can pull it to the field behind my tractor and implement. At milking time, drive the AMT home, leaving the tractor and implement in the field, We also use it to pick up rocks .” Arthur Mangels, Polson, Mont.; Arthur is pleased with his “best buy” Case-IH 445 baler. “Itproduces much more uniform bales than Deere or New Holland balers, and doesn’t cut a short chunk of plastic twine and leave it lying on the hay as some brands do. However, this baler should have a heavier gearbox and driveline.” Arthur says his “worst buy” is his 1985 Deere 2550 tractor equipped with MFWD. “The hydraulic system leaks and the Deere 245 QuickTach front-end loader doesn’t have enough lifting capacity. Also, loader mounting brackets in front of the windows interfere with visibility for row crop work.”

Best Buy
Anthony Tiell, Tiffin, Ohio · Vol. 13, No. 1 (1989), p. 14

Anthony Tiell, Tiffin, Ohio: “Works great in tight places,” says Anthony about his 1987 Bobcat 543 skid steer loader. “The diesel engine gets good fuel economy and starts well in cold weather. “Our New Holland manure spreader equipped with an end gate hauls and spreads any kind of load. Works great.”

Worst Buy
Stephen Wallace, Heuvelton, N.Y. · Vol. 12, No. 6 (1988), p. 13

Stephen Wallace, Heuvelton, N.Y.: “Our worst buy is a New Holland model 38 flail chopper. We had toreplace three sprockets because the gearbox couldn’t be properly aligned, and we had problems with the gearbox itself,”

Best Buy
Dennis Pruehsner, Okawville, IIL · Vol. 12, No. 5 (1988), p. 12

Dennis Pruehsner, Okawville, Ill.: “They should send these combines back to the drawing board,” says Dennis about his 1981 New Holland TR 85 combine. “We couldn't get any material through it. The dealer was slow to help and then couldn't find anything wrong. Neither could a company rep. After replacing seven rotor drive belts, we took out the concaves and found two cylinder bars were in backwards. By this time the rotors were twisted and out of i a 1inate sUYS balance. They replaced the rotors but the combine neverran smooth again. The header is driven by one 50-link chain and it breaks continuously: The hopper auger is driven by one belt. You can’t stop unloading in the middle of the hopper or it won't start up again.”

Best Buy
Robert Randall, Holcomb, N.Y. · Vol. 12, No. 5 (1988), p. 12

Robert ranks his 50 by 100 ft. Universal steel quonset, erected a year ago, as a “best buy”. “It was cheaper to construct than a pole building and much cheaper to insure. The two 15 1/2 by 24-ft. door openings allow easy access for machinery, and the birds can’t find a rafter to set on in the summer,” Dennis Pruehsner, Okawville, Ill.: “They should send these combines back to the drawing board,” says Dennis about his 1981 New Holland TR 85 combine. “We couldn't get any material through it. The dealer was slow to help and then couldn't find anything wrong. Neither could a company rep. After replacing seven rotor drive belts, we took out the concaves and found two cylinder bars were in backwards. By this time the rotors were twisted and out of 1inate SUYS balance. They replaced the rotors but the combine neverran smooth again. The header is driven by one 50-link chain and it breaks continuously: The hopper auger is driven by one belt. You can’t stop unloading in the middle of the hopper or it won’t start up again.”

Best Buy
Paul Matheson, Embro, Ontario · Vol. 11, No. 6 (1987), p. 13

Paul Matheson, Embro, Ontario: “I don’t think many Americans are familar with our best buy, Texaco’s “Floatcoat”. We use it to “undercoat” farm equipment as well as cars and trucks. I started undercoating years ago, spraying the underbody and inner panels of cars with used motor oil to preserve car bodies from damage by the salt on our roads in winter, The oil stopped the rust but ate away window and door rubber moldings. We now usc Floatcoat rust inhibitor, [t looks almost like rear-end fluid and slicks wherever it's sprayed. It’s almost impossible to wash off, even with a high pressure washer, heat the product in an oven before applying it with a special undercoating gun, Once a year we high-pressure wash all of our farm equipment and spray it with this product. Our 1972 New Holland manure spreader, for example, still looks like new, including the apron chain and floor.”

Best Buy
LoRoy Zenner, Belgrade, Minn. · Vol. 11, No. 6 (1987), p. 13

LoRoy Zenner, Belgrade, Minn.: “One of my best buys ever is a 269 New Holland baler bought new in 1967. With only the normal minor repairs, it's worked faithfully for nearly 200,000 bales.”

Best Buy
High River, Alb. · Vol. 11, No. 5 (1987), p. 13

High River, Alb.: Warren nominates his 1978 TR 70 New Holland combine and 1983 Deere 510 round baler as “best buys”. “Both machines are trouble free and a pleasure to operate.”

Best Buy
Jerry Barnes, Danville, Ill · Vol. 11, No. 5 (1987), p. 14

Jerry Barnes, Danville, Ill: “In 1985 I bought a new Chrysler LeBaron witha 2.6 liter, 4 cyl. engine. The engine on this car never ran right. Although it would start good and run down the road fine, you never knew if it would accelerate at a stop light or cough and die. After many return trips to the dealer and near misses at 4-way stops, I traded it fora 1987 Chevrolet Celebrity with a 2.8 liter V-6 engine which is a nice car with a good engine. “Talso like my 19874WD Chevrolet 1ton pickup with 454 engine. I'd owned a 1983 Chevy 1/2-ton with a 305 engine but it was always short on power. With the new truck we have plenty of power and load “I've had it for 9 years and it's still a reliable machine," capacity. Can pull heavy loads with no problems. “Another best buy has been an International 1460 combine. I've had it 9 years and it’s still a reliable machine that’s relalively easy to work on. It may not have all the advanced gadgets as the new ones, but it doesn’t have a payment book in the cab either.” Jim Sherman, Andrews, N.C.; “The money I've spent trying to solve adaptor plate, heat and engine problems has cost more than any fuel savings | might have received had I got any,” says Jim, disappointed with M3 and MS5 Fish carburetors. “The manifold adaptor plates warped, allowing loss of vacuum. Also, the lines, aa t Buys ) pump and float bowl are so heat sensitive that fuel tends to vaporize in the line before it’s in the carburetor bowl, even when wrapped in insulating tubing.” George Stewart, Fayetteville, Tenn.: “My 1987 Case 885 tractor with 2250 loader has its plusses and minuses. It has plenty of power and works well to clean out low barns. Minuses are the hydraulic control location, drawbar height, and case of filter change and oil addition with the bucket on. Also, the steering radius is more than | like. Loader is excellent for moving round bales and manure handling. [ also like the ease of mounting.” As “worst buy” he nominates his 1987 Isco hi-lift bale mover. “The bolts were grade two inthe third arm. They broke while picking up the first bale. The lift crimped 2 hydraulic lines on the tractor and the hinge points are built too weak. It works alright after replacing the grade 2 bolts with grade 8. ! “I do like my 10-20 Grain-O-Vator with hydraulic controls. It’s worked well with no major breakdowns. My New Holland equipment, including a 315 baler with model 80 thrower, 512 manure spreader and 478 haybine all work well. They've been trouble-free and the haybine, bought new in 1976, cuts 300 acres a year and still does a good job of cutting and conditioning hay. The only problem has been the chains that drive the rollers.” George also likes his 1982 International 800 4-row plate planter and Lifetime hydraulic hog trailer. “Planter’s seed placement and no-tilling ability have been excellent. The only problem has been the fertilizer drive chain and that the disk openers wear too fast. We've used the trailer almostevery day for six years with no problems.”

Best Buy
C. Norton, Wellington, Ohio · Vol. 11, No. 2 (1987), p. 13

C. Norton, Wellington, Ohio: He names his 54 by 75 ft. Morton pole barn as "best buy". "Best building of its kind available today. Has high quality workmanship and an outstanding warrranty. The crew aims to please and does." Jeff Vackiner, Chambers, Nebraska; "Although my Tonutti T8-85 Danish tine wheel rake does an excellent job raking, the teeth catch on the tool bar and stop the wheels from turning. You then have to stop and bend the teeth back in line before you can take off again. Also, a seal went bad in the cylinder that raises the rake. It's an oddball type that can't be replaced with a normal cylinder, "My best buy is a New Holland model 85 round bale mover. It loads and unload bales quickly on the go. I pull it with an THC "M" tractor with duals. I can haul up to 4 big bales off of very wet meadows without leaving ruts."

Best Buy
R. Frey, Phillipsburg, New Jersey · Vol. 11, No. 2 (1987), p. 13

R. Frey, Phillipsburg, New Jersey: "My best buys are all New Holland equipment, including balers, Haybines and choppers. They're all wellmade. I hope the recent acquisition by Ford doesn't adversely affect their products. "Chore Boy ‘Quarter Flow’ milker claws are both my best and worst buy. They're just as fast as Delaval but can't possibly back-flood due to a design like manifold headers on a racing engine. However, they're fitted with certain plastic parts that break easily and are only available by mail order."

Best Buy
Rob Dewitz, Steele, N. Dak. · Vol. 10, No. 4 (1986), p. 14

Rob Dewitz, Steele, N. Dak.: Heading Rob’s “best buy” list is a pair of Deere tractors. “Our 1981 4240 and 8640 have both been very little trouble to maintain. They've justified their higher price tag. “We're also pleased with our two 355 New Holland grinder mixers. One is about 8 years old and must have had 100,000 bu. through it without a hitch.” On the negative side, he's had trouble with a 330 Mustang skid steer loader with a 25-hp. Onan engine from Owatonna Mfg. Co., Inc. “'I bought it used with 800 hrs, on it. It used some oil right away and got worse each time I started it. | had it overhauled three times before | found someone who knew how to fix it. Now it runs okay but I wish it was liquid cooled.”

Best Buy
Brian Dahmen, Pferz, Minn. · Vol. 10, No. 3 (1986), p. 13

Brian Dahmen, Pferz, Minn.: His 489 New Holland haybine and 327 John Deere baler top his “best buy” list. ‘‘The haybine is excellent with its floating head, We have séveral granite chunks sticking out of the ground but it floats right over them. The baler is unstoppable.” Joseph Tymoc, Box 01477, me ‘$600 to $700 and it’s in for 3 to 7 weeks.”

Best Buy
Steven Kolbet, Marble Rock, lowa · Vol. 10, No. 3 (1986), p. 14

Steven Kolbet, “Another best buy is our 1975 775 New Holland skid steer loader with Perkins 57 hp. diesel engine. No problems at all and it’s more stable than other skid steers,"’ says Delbert. Wilbur Damman, Melbourne, Iowa: ‘‘Our best buys are two White tractors, a 2-70 and 2-85 with a cab. They're very fuel efficient and smooth running. They each have logged nearly 4,000 hrs. and have never had any work done on them. We also like our White Field Boss planter.” Anderson Hammond, Nichols, S. C.: His 55 Homelite chain saw and 1982 Ford pickup top his ‘best buy”’ list. “My ‘chain saw is always ready and has never given any trouble. My 1982 Ford pickup has given good service, thanks to a good local dealer.”

Best Buy
Roger Neuman, Baraboo, Wis. · Vol. 10, No. 2 (1986), p. 12

Roger Neuman, Baraboo, Wis.: “We'd like to nominate our Ford tractors as best buys. We currently own five — an 8000, two 7000's a 5000 with a loader and a 4600. They're trouble-free, economical to run and the best-built tractors in the industry. Once you own a Ford tractor, you'll never want anything else. | know we never will. We're very happy about the Ford buy-out of New Holland because our New Holland equipment also ranks high on our best buy list. “On the negative side is our Badger silo unloader, We've had nothing but trouble with it since the day we bought it. It's now four years old and “We've had nothing but trouble with it since the day we bought it.” completely worn out. We'll never buy another."

Best Buy
Clare Duffield, Browns Valley, Minn. · Vol. 10, No. 2 (1986), p. 13

Clare Duffield, Browns Valley, Minn.: "There's nothing particularly wrong with the building but dealer service was zilch. It was ordered in August, promised by Nov. 1st, and erected by Jan. 15 in bitter cold, Cement was damaged during construction, a roof panel was also damaged, and a service door put in the wrong place. Automatic door controls were improperly installed. The dealer verbally promised to correct everything but only fixed the service door. Now he will not even return my phone calls,"' says Clare upset with his "worst buy" 40 by 50 by 16-ft. Butler insulated farm shop. He cites his HayBuster tub grinder and New Holland auto tie baler as "best buys'. 'Both stood up extremely well under custom work. Dealer service and company back-up were very good."

Best Buy
Browns Valley, Minn. · Vol. 10, No. 2 (1986), p. 13

Browns Valley, Minn.: “There's nothing particularly wrong with the building but dealer service was zilch. It was ordered in August, promiséd by Nov. 1st, and erected by Jan. 15 in bitter cold, Cement was damaged during construction, a roof panel was also damaged, and a service door put in the wrong place. Automatic door controls were improperly installed. The dealer verbally promised to correct everything but only fixed the service door. Now he will not even return my phone calls,"’ says Clare upset with his “worst buy” 40 by 50 by 16-ft. Butler insulated farm shop. He cites his HayBuster tub grinder and New Holland auto tie baler as “best buys’. ‘Both stood up extremely well under custom work. Dealer service and company back-up were very good.”

Best Buy
Mike S. Waldner, Rosholt, S. Dak. · Vol. 10, No. 1 (1986), p. 12

Mike S. Waldner, Rosholt, S. Dak.: “Our 1985 New Holland hydraswing 114 Haybine is our best buy. We've never before been able to put hay up so fast and so well. Works great.”

Best Buy
Wayne Lake, Richmond, Kty. · Vol. 10, No. 1 (1986), p. 13

Wayne Lake, Richmond, Kty.: ‘My best buy is a Tye Pasture Pleaser pasture renovator. It does a good job.” Ross 0. Essary,Taneyville, Mo.: “One tire busted at about 10,000 miles. The dealer refused to do anything, saying there was no guarantee on them. The other three were completely worn out at 16,000 miles,’ says Ress about his “worst buy” Geedrich pickup tires. On the plus side he says, “We've cut abou! 200 acres of hay with our New Holland Haybine with no downtime at all. My Sachs Dolmar 112 chain saw is also a best buy. It’s gone through many chains but still works good as new.”

Best Buy
Laurence J. Place, Perry, Mich. · Vol. 10, No. 1 (1986), p. 13

Laurence J. Place, Perry, Mich.: “My best buy is a Hesston 4600 Beeliner hay baler. We pick up our bales with a New Holland automatic bale wagon which requires that bales be as perfectly square and uniform as bricks. This is the only baler I've seen that does the job. It’s also able to go as fast as a round baler but without having to stop to eject bales. The baler is heavily built and small problems we've had were immediately taken care of by our dealer and Hesston Corp., even after the normal one-year warranty expired.”

Best Buy
Arnold L. Wren, Alsea, Ore. · Vol. 9, No. 6 (1985), p. 15

Arnold L. Wren, Alsea, Ore.: "My last two New Holland balers, a 273 and 278, have been nothing but trouble, repair and expense. We now own a Hesston baler and we're in our third season with no breakdowns and it's easier to run, making it almost a pleasure to make hay. Good dealer service, too."

Best Buy
Charles B. McKinley, Pawhuska, Okla. · Vol. 9, No. 5 (1985), p. 12

Charles B. McKinley, Pawhuska, Okla.: "It's probably five years old, but it seems like a lifetime! Never has run right. Won't rev-up to full speed unless you leave the choke part way closed or adjust the mixture screws," says Charles disappointed with his worst buy Sears Weed and Brush Cutter. "Another worst buy were the Firestone 16.9 by 30 tires that came on a new 1983 Deere 2550 tractor, The lugs were so soft you could easily move them % to Y-in. with just your fingers. We had three flats on them in the first summer's mowing mowing the same fields that my old Goodyear tires went over seven years before having even one flat. We'll never buy another Firestone tire."' inate On the "best buy" side, Charles lists his 1984 one-ton GMC truck with a 454 cu. in. engine and his Lincoln 150 portable welder. "It's a good all-around truck but I wish they could do something with the back brakes. It's just past a year old and I'm on the third set of brake pads. The welder has done everything from welding and thawing frozen pipes to running electric branding irons. After eight years, I finally had to put anew battery in it." Chris M. Lee, Arlington, S. Dak.: "This combine worked perfectly from the first day of operation throughout the whole first season. New Holland has a quality product here,"' reports Chris, pleased with his TR75 combine.

Best Buy
Allen Schroder, Belle Plaine, Iowa · Vol. 9, No. 5 (1985), p. 14

Allen Schroder, Belle Plaine, Iowa: "It's my second New Holland haybine. I ran the first one over 4,000 acres in 10 years with no problems. My new 489 model is even better with its floating head."

Best Buy
Richard J. Sweep, Crookston, Minn. · Vol. 9, No. 4 (1985), p. 13

Richard J. Sweep, Crookston, Minn.: "We've relied on New Hol- land for 30 years. Our repair costs are small on the 14 units of New Holland equipment that we own, If you must have machines that work, buy New Holland. They're well-built and the company stands behind them," re- ports Richard, who nominates his New Holland 851 round baler as "best buy".

Best Buy
Kerry Camp, Knox City, Mo. · Vol. 9, No. 4 (1985), p. 14

Kerry Camp, Knox City, Mo.: ‘As near as we can figure, we work on it 2% hours for every 1 hour it runs,” says Kerry, disappointed with his New Holland TR 70 combine purchased in 1981. ‘‘Needs new feederhouse chain every season and a new pan every two years. Had to take the rotors out twice in one season. Pieces shook loose on the rotor so we “New Holland shouldn’t have let this prototype out on the market.” had to weld them in place. New Holland shouldn't have let this ‘Prototype’ out on the market — too many moving parts and too much maintenance.”

Best Buy
Richard Cronk, Harlem, Mont. · Vol. 9, No. 3 (1985), p. 14

Richard Cronk, Harlem, Mont.: “New Holland's 855 round baler is a high-capacity machine that makes dense round bales in alfalfa, grass hay, or straw. It was delivered ready to bale and hasn't needed any repairs.”

Best Buy
Ray Martin, New Holland, Penn. · Vol. 9, No. 1 (1985), p. 12

Ray Martin, New Holland, Penn.: “I've used my White 2-50 diesel tractor, equipped with a Dunham model 22 loader, for over 2,000 hours without any problems. The tractor runs efficiently, using about ¥4 gal. of fuel an hour doing loader work. like the loader because it attaches and detaches in minutes and can be done anywhere.” Peter Chaykowski, Rose Valley, Sask.; “Even though I’ve worn out 2 bars and 4 chains on my Pioneer #26 chain saw, the motor is like new and starts every time.” Peter is disappointed with his Polaris snowmobile. “I put in new pistons and a crankshaft, all of which lasted one day, Poor starting and poor dealer.” 7

Best Buy
Ewald Silzer, Lake Lenore, Sask. · Vol. 8, No. 6 (1984), p. 13

Ewald Silzer, Lake Lenore, Sask.: “We haven't bought anything in the last two years that we can really complain about but we bought three New Holland TR 70 combines several years ago that were certainly lemons. In 1976, I made a mistake by trading off my old combine in March fora TR 70, which was supposed to arrive in June. The old combine was gone and the new one didn’t arrive until midSeptember so I had to hire combines to get the crop off. When the new one did arrive, it wasn't field ready. The dealer wouldn't help so we had an awful lot of trouble with it. Then, in 1978, we traded for two new TR 70's but they didn’t work any better. The main bearings went out on both machines at just 50 hrs. “Now we own a New Holland TR 95. It's been a real treat to go to the field at harvest with this combine and it's worked well for two seasons. Does an excellent job threshing and we have had very little down time. “Another best buy is our Flexi-Coil 60-ft. harrow packer. It does a good job and we've had no breakdowns. It's easy to put into field or transport position without getting off the tractor.”

Best Buy
B.H. Parkey, Gilman City, Mo. · Vol. 8, No. 6 (1984), p. 13

B.H. Parkey, Gilman City, Mo.: “Our 519 New Holland. manure spreader is fantastic and does a good job with no down time. It’s a qualitybuilt machine, as are all New Holland products I have used.”

Best Buy
James Woosley, Caneyville, Kent. · Vol. 8, No. 5 (1984), p. 13

James Woosley, Caneyville, Kent.: “When our dealer brought us our new 315 New Holland square baler it wouldn't tie. They put another knotter on it and that helped some, but it still doesn’t work like it should.” James is pleased with his Deere 410 round baler. “I've baled 2,840 bales with it and haven't had any trouble whatsoever. It’s very satisfying to have the dealer stand behind the product and it's easily my best buy.”

Best Buy
Gerald Casler, Ft. Plain, N.Y. · Vol. 8, No. 5 (1984), p. 14

Gerald Casler, Ft. Plain, N.Y.: He likes his New Holland hay equipment. “We've got a 320 baler, a 358 rake, a 495 Haybine and all are best buys. We also have four Gehl forage harvestors and several Gehl blowers that have given good service. “I bought a new Case tractor too. It has a nice cab and was a good buy because of rebates and a good trade-in allowance. I don't like it as well as some of my old Oliver tractors, however.”

Best Buy
LeVern K. Eldred, Leslie, Mich. · Vol. 8, No. 4 (1984), p. 12

LeVern K. Eldred, Leslie, Mich.: “Here's a list of some of the problems I've had with my 1982 Oldsmobile 98 Regency Brougham 4-door diesel. The trunk light stopped working; the starter broke; the front window on the driver's side stuck half way up and had to remain that way for two weeks waiting for parts; the air conditioner and electric seats quit; traveling secondary roads through Texas, the transmission sheared off a gear and we drove 30 mph for 125 miles in low gear; transmission wouldn't shift until you reached the speed of 55 mph; replaced four new cams; replaced fuel pump and put in new filter; trunk lid cable broke; and, the control on the solenoid for the glow plugs went haywire. “Despite all these problems, the radio works fine and the clock keeps perfect time.” Edmund O. Brown, II, Reeds, Mo.: “New Holland hay machinery is second to none in engineering, design, and durability. They are innovative, yet simple to work on. I bought a used 1010 bale wagon and it has never given any trouble, which is unusual for a machine so complicated. I also own a 269 baler and a 256 rake. All very dependable.”

Best Buy
Richard K. Smith, Boonville, Mo. · Vol. 8, No. 3 (1984), p. 12

Richard K. Smith, Boonville, Mo.: “One of my best buys is a New Holland Haybine. I have cut a lot of hay with it with very little trouble. We accidently ran two fenceposts into it that had to be pulled back out with a tractor but they did no harm to the rolls. The only weak point on the machine is the bushing in the sickle. I like the machine so much, though, that I kept it and bought a new model 488, that has an improved sickle drive, and a new 316 square baler. also have a New Holland big round baler and two side delivery rakes. think they build good machinery.”

Best Buy
Ralph Van Dyke, Quincy, Wash. · Vol. 7, No. 6 (1983), p. 10

Ralph Van Dyke, Quincy, Wash.: “Our Deere 466 and 467 balers are better and faster than the New Holland balers they replaced," says Ralph about his “best buys’. ‘The mechanism that moves the hay to the bale chamber on the New Holland baler takes a lot of care or you'll have trouble, The Deere balers are much simpler all around and cheaper to upkeep. We're well-satisfied with their performance.”

Best Buy
Robert Ayers, Whitehall, N.Y. · Vol. 7, No. 6 (1983), p. 11

Robert Ayers, Whitehall, N.Y.: “It works," says Robert, pleased with the metal detector in his New Holland 892 forage chopper. “When properly adjusted, it stops the feed rolls when almost any form of metal is picked up. I've seen it stop for small pieces of wire, wrenches, small nails in a board, and even a paper oil can witha metal ring around the top.”

Best Buy
Mike Scanlon, Oskaloosa, Iowa · Vol. 7, No. 6 (1983), p. 12

Mike Scanlon, Oskaloosa, Iowa: His ‘‘best buy” is his New Holland 855 baler. ‘It makes a lot heavier and denser bale than the old 851 baler. like the heavier apron chain, automatic chain oiler, 6-bar hay pickup and the roller in the bottom that replaces floor chains. It also takes less power to operate than the old one. A well-built, dependable easy-tooperate machine.” Mike's disappointed, however, with his Deere grease gun. “It works good if you can get it started after changing cartridges. tried several different kinds of grease in it and it makes no difference. Usually, after five minutes and a big mess, it starts working. Maybe it needs a bigger valve to bleed the air out.”

Best Buy
Nate Reilly, Spokane, Wash. · Vol. 7, No. 6 (1983), p. 12

Nate Reilly, Spokane, Wash.: He's pleased with both his International 674 tractor and his New Holland 489 mower conditioner. “I bought both machines new a few years ago and they have been real dependable with just routine service.”

Best Buy
Daniel E. McBane, Snow Camp, N.C · Vol. 7, No. 5 (1983), p. 10

Daniel E. McBane, Snow Camp, N.C: “It's got the strongest 3-pt. lift I've ever used,"’ says Daniel, pleased with his International 354 gas tractor, “It's very productive. Has good weight, power and balance fora small tractor.” He's had trouble with his Oldsmobile diesel car. “It has injector pump problems, starter problems, is hard to start when hot, and gives poor performance.” James L, Cox, Gower, Mo.: ‘‘It gets good fuel economy, has ample power for its size but I have not had good dealer service,” says James about his International 686 tractor. “Both rear tires were defective initially. The tire manufacturer said they were installed wrong and the dealer couldn't figure out how to handle them. I had to buy them out of my own pocket and write to THC to finally get my refund. Then I had trouble with the TA leaking and after four trips to shop, it was fir nally fixed with a new housing. Have had no more trouble.” Jeff: eg ebe Mount Morris, N.Y.: “We bought a New Holland TR85 rotary combine two year's ago. It has lots of power and does an absolutely wonderful job combining wheat and oats. Our dealer does a good job in service and pa rts."

Best Buy
Marion R. Miller, St. John, Kan. · Vol. 7, No. 5 (1983), p. 11

Marion R. Miller, St. John, Kan.: “We bought a new 224W Deere square baler in 1972. It performed so well through the years we bought a new 1983 Deere 347 square baler this year. It’s doing a perfect job, Compared to two other brand name balers we have used, the Deere makes a better, more compact bale. That's important because we use a 1974 New Holland 1049 stack wagon to pick up bales and the more compact, the easier they are to pick up," says Marion.

Best Buy
Don Zelt, Gladwin, Mich. · Vol. 7, No. 4 (1983), p. 12

Don Zelt, Gladwin, Mich.: “Runs smooth and quiet. Trouble free and simple to change from swath to windrow,” says Don about his New Holland 489 haybine. He's not satisfied with his Deere 336 baler. “It runs and ties well but I'm disappointed with the capacity. The bale length varies too much when in heavy use. It’s also unnecessarily hard to service.”

Best Buy
Dan Hyrich, Belmont, Man. · Vol. 7, No. 2 (1983), p. 10

Dan Hyrich, Belmont, Man.: ‘‘I'm very disappointed with my New Holland bale wagon and baler. They're just built too light and, although they do a nice job, they have too much downtime. “But I'm pleased with my Deere 6620 combine. It’s easy to service, trouble free and an unbelievable pleasure to operate. Am so pleased with my Deere 4640 and 4440 tractors. They're easy on fuel and have great comfort.”

Best Buy
Brian Yokimas, Selkirk, Manitoba · Vol. 7, No. 2 (1983), p. 11

Brian Yokimas, Selkirk, Manitoba: “Since took delivery of my 986 International tractor in July of 1979, I've had no downtime at all,” says Brian. “It has unreal power for only 105 hp., easily pulling 30 ft. of seeders at 6 mph. It never burns over four imperial gallons of fuel per hour. “Unreal power for only 105 horsepower.” Very reliable and economical. “We also have three best buy older New Holland combines that just keep going and going. The first one, a 980 which I bought used in 1973, has had less than ¥ hour of downtime in the 10 years I've owned it. Very good machines.” Davie L. Overton, Jr., Henderson, N.C.: “Since I am a small farmer, don’t buy much new equipment,” says Davie, naming his Farmall M tractor as one of his all time “best buys’’. ‘This Farmall gives good service and is just the right size for our heavy disking jobs. At one gallon per acre, it's easy on fuel, Haven't had any trouble.” He had problems though, with his McCulloch 110 chainsaw. “It worked well the first year but after that the carburetor kept clogging up. bought it new to trim trees on the edge of my fields but T have ended up spending all my time working on it, It is a nice light saw but it’s hard to keep the carburetor working.”

Best Buy
Oland McCain, Laurel Hill, Fla. · Vol. 7, No. 1 (1983), p. 10

Oland McCain, Laurel Hill, Fla.: “We've had very disappointing experiences with Ford hay equipment. It's built lighter and not as well as Deere or New Holland. Would not recommend it to anyone," says Oland. On the plus side, he’s had good luck with his Kuhn disc mower and Butler Agri-building. “The mower cuts very clean through even thick coastal Bermuda grass, even when the grass is wet. Appears to be well engineered and built.”’

Best Buy
Fred Adrian, Binford, N. Dak. · Vol. 7, No. 1 (1983), p. 12

Fred Adrian, Binford, N. Dak.: ‘We have only broken a half dozen Worst’’ Buys previous page) sickle sections on 1,500 acres of quite rocky ground,” says Fred, pleased with his 1981 114 New Holland swinger Haybine, “It has a very good floating head.” Louis F, Major, Newberry, Mich.: “This baler is a whopper!"’ says Louis, pleased with his New Holland 847 round baler. ‘We bought this baler brand new and baled 500 acres without a second of trouble or a single misbale.” On the negative side, he had trouble with his “medium size Gehl baler. We had nothing but trouble with it. The baler would not start bales and we spent more time pulling hay out of the front of the machine than we did baling.”

Worst Buy
Scott Ewalt, Harmony, Minn · Vol. 6, No. 6 (1982), p. 14

Scott Ewalt, Harmony, Minn: He says his ‘‘worst buy" is a head adaptor from Brobst and Associates, of Lincoln, Neb. ‘My local International dealer ordered an adaptor from Brobst to mount an 863 IH corn head on my New Holland combine. It wouldn't fit and, after several phone calls to Brobst, we got no satisfaction and he wouldn't give us our money back. We finally got an adaptor from Harv's Farm Supply of Giltner, Neb., that I'm very pleased with. It fits well and I got excellent service when a sprocket wore out.” Scott's also happy with an Eagle grain loss monitor sold by “The grain loss monitor was easy to install on my TR75 and works “Tt paid for itself the first week.” good, It paid for itself the first week. I like the simplicity and accuracy of the 5100 planter.”

Best Buy
Paul R. Bodensteiner, West Union, Iowa · Vol. 6, No. 6 (1982), p. 15

Paul R. Bodensteiner, West Union, Iowa: “I would like to nominate our White 2-135 tractor as our best buy,” says Paul. ‘It has excellent power and traction and uses less fuel per acre of work done than any other tractor we've owned, It handles very well, the cab is comfortable, the ride is smooth and all controls are within easy reach, “Another good buy is our New Holland TR70 combine. Our corn has very few cracked kernels, split beans are almost impossible to find in the grain tank and there are almost no pods or broken cobs in the grain.”

Best Buy
Glenn Hawkins, Upton, Ky · Vol. 6, No. 5 (1982), p. 13

Glenn Hawkins, Upton, Ky: “New Holland seems to continually improve on their already fine line of products,” says Glenn, pleased with his New Holland 489 mowerconditioner. “I cut 650 acres of hay this season and last with just one broken section. The floating head is designed better for following rough terrain than the previous model. “Also on the plus side is my Lincoln arc welder. It's an AC/DC model, which makes it a reliable tool for the shop and handy for those hard-to-get places with the DC. It’s much cheaper than large DC welders and yet you still have AC for general welding. It’s also large enough for most repair work — with a reasonable price tag.”

Best Buy
G.J. Gamache, Buick, B.C · Vol. 6, No. 5 (1982), p. 14

G.J. Gamache, Buick, B.C: “My ‘best buy’ of all time isa 1949 Farmall M which bought seven years ago for $800, I do all the seeding and baling with it and, until last year, it did all the swathing too. We have used it in the winter to haul water and it started even at 40° below zero. I’ve never had to add oil and, in the time I've had it, the only repairs have been a set of points and plugs and a new drawbar. It's been a fantastic old machine. “Also a ‘best buy’ is my Homelite XL 12 chainsaw. In nine years, I've replaced the chain two times and the bar once, which was my fault for not oiling it enough. It doesn’t have an automatic oiler. I've never had to change the plugs and only adjusted the carb. once. “My ‘worst buy’ is a Wisconsin air-cooled engine. They may be a good engine but, if you ever have to repair it, their prices are just out of this world. A complete gasket set, two pistons and a set of rings for four holes came to just under $350, I think that was a little high. can't see how one piston should cost $86. Also, why should a 20-hp. motor cost $5,000 when! can buy 4390 cu. in. V8 for my pickup for around $2,000? This is the last piece of equipment buy with the Wisconsin name on it.” Charles, Wylie, Proctorville, Ohio: He nominates his New Holland 489 Haybine as ‘“‘best buy’. ‘Very well constructed and engineered and has the best paint job of any farm equip“The best paint job of any farm equipment I’ve ever had.” ment I've ever had. Performance is excellent. The turns at the corners are amazing.”

Best Buy
Don Rickard, Bowmanville, Ont · Vol. 6, No. 5 (1982), p. 15

Don Rickard, Bowmanville, Ont: Don's disappointed with Massey Ferguson's service department. “You would think a company trying to build its image would start with the service end." Don's happy, however, with his New Holland 892 forage harvester. “It performs well in the field and can take all crops — hay, corn, and corn cob meal, All problems are well looked after by the local dealer, which means a lot during the busy harvest season. All our New Holland equipment is well-built and wellserviced when needed."

Best Buy
Billy Bynum, Cowan, Tenn · Vol. 6, No. 4 (1982), p. 13

Billy Bynum, Cowan, Tenn: “Does an excellent job of cleaning and separating grain and we like the dust-free cab. Also, it’s extremely easy to operate,” says Billy, pleased with his New Holland TR75 combine. On the negative side, he notes that, “we bought a 1979 Chrysler La Baron which performs well but came equipped with bad General tires. Because of the cheap General tires, it vibrates excessively.”

Best Buy
Melvin Paul, Marissa, Ill · Vol. 6, No. 3 (1982), p. 11

Melvin Paul, Marissa, Ill: “Many pickups have had my name painted on the door but I’ve never been so pleased as am with my 1981 GMC High Sierra,” says Melvin. “It’s been my ‘truck of trucks’, always performing beautifully! “T also have two great tractors that have never had a service call — a Deere 4240 and a Deere 4640, both bought in 1978. For me, green is the machine when it comes to tractors." On the negative side, Melvin has had trouble with his New Holland 775 skid steer loader. "It's with mixed emotions that complain “It’s my ‘truck of trucks’. Always performs beautifully.” about this machine because it’s as handy as having an extra hired hand and the company has been good about repairing it. But it’s had broken brackets, hydraulic breakdowns, and injector trouble on its diesel engine.”

Worst Buy
Bill Duckworth, Epps, La · Vol. 6, No. 3 (1982), p. 13

Bill Duckworth, Epps, La: ‘This feeder and conveyor is a joke,” says Bill, disappointed with his ‘‘Harvestore ‘Super Shuttle’ feeder and 105 conveyor. They were built cheap and sorry. The feeder had a tendency to disintegrate from time to time, and the chains break constantly in the conveyor. When they break, it takes half a day to dig them out, straighten them and put it back together. Extremely bad buy.” Bill says another “worst buy" was a 360 cu. in. engine in his Ford truck. “The 360 engine was designed wrong and Ford knew it. They extended the warranty 30 months but waited until the 30. months were up before sending a letter to inform us. After buying eight trucks and cars and two tractors from them in the last 10 years, we felt this was a lousy way to treat us. After three years of blown head gaskets, extreme oil consumption, water in the oil, and very little power, we replaced the engines at our own expense. Very little we can do but tell other people,” On the positive side, Bill's pleased with his Farmhand grinder-blower. “This machine has to be the most rugged-built and simplest grinder ever. We have ground over 10,000 bushels of milo and 5,000 bushels of oats with no problems, It has never plugged up, which I couldn't say about the grinder it replaced. Truly a peasure to operate.” Another good buy was his John Deere Max-Emerge 7100 planter. influenced my decision to buy a Max-Emerge,” says Bill. “It has the best seed depth control on the market, is well-built and easy to service. We have planted 400 acres with only minor problems.” Andy Pomerleau, St. Paul, Al‘berta: “This swather is more than a match for any of the hydrostatic swathers on the market today," says Andy, happy with his 1967 New Holland 905 swather with conditioner. ‘‘The flotation draper header cleans obstructions very well and is built to withstand lots of wear and tear. A dream to handle. I look forward to using it each year."

Worst Buy
James Creighton, Cannington, Ontario · Vol. 6, No. 2 (1982), p. 13

James Creighton, Cannington, Ontario: James lists his Massey Ferguson 510 combine as ‘‘worst buy”. “We had nothing but trouble with this machine. It worked fine in small grains but seemed to fall apart when we got into corn. Cost us a fortune in parts and repairs the four years we ran it,”’ he says. On the positive side, he’s pleased with his Case 1370 tractor and his New Holland 892 forage harvester. “We've driven this tractor 1400 hours and it’s never been in the shop. A pleasure to operate and it's easy on fuel. The harvester is a dream to work with. Has loads of capacity. Like the flip-up feed rolls and the newstyle corn head is a great improvement over our old machine.”

Best Buy
Don H. Patterson, Roland, Manitoba · Vol. 6, No. 1 (1982), p. 10

Don H. Patterson, Roland, Manitoba: Don’s disappoined with his 18-ft. Versatile pto-powered swather. “T bought the unit new and before cut 50 acres the pto shaft fell off due to a faulty set-screw. Right after 100 acres, a shaft that drives the rollers twisted off due to a bearing seizure. There was no shaft available for it anywhere in Canada. I rented a neighbor’s machine to finish swathing. The manufacturer paid for the rental and the dealer was most cooperative.” On the plus side, Don nominates his 851 New Holland round baler as “best buy”. “It's the most trouble-free machine we've ever had on this farm. We've baled 4,000 bales with it and never had one stop or breakdown.”

Best Buy
Jim D. Hansen, Bloomer, Wis · Vol. 6, No. 1 (1982), p. 10

Jim D. Hansen, Bloomer, Wis: ''! have three Leyland tractors and am very happy with them all. In six years, I've had no tractor trouble at all. You have to work them hard to use as much as a gallon per hour of diesel fuel. “Also, all New Holland machines bought in the last seven years have been good buys. only had one major problem, and both the company and dealer bent over backwards to help.” Leslie B. Parker, Jr., lonia, lowa: “We purchased a new 1440 International Axial Flow combine this fall and harvested 550 acres of soybeans and 550 of corn. The combine did an excellent job and we had no problems. Our dealer's service is very good, “We also rented a Bush Hog Soil Saver. It's field heavy and does a great job.”

Best Buy
Lawrence Paul Corbin, Shelbina, Mo · Vol. 6, No. 1 (1982), p. 11

Lawrence Paul Corbin, Shelbina, Mo: He's happy with his New Holland TR-85 combine equipped with 43-in. wide Terra tires and Mud Hog drive. ‘I combined 1,000 acres of wheat during the 1981 Midwest ‘monsoon season.’ I was hooked onto only once and never opened the side doors since I didn’t plug the machine even once. It combined green smartweed which stood higher than the reel, and picked up down barley, salvaging 50 bushels per acre of clean grain.”

Best Buy
Mark R. Dour, Slippery Rock, Penn · Vol. 5, No. 5 (1981), p. 10

Mark R. Dour, Slippery Rock, Penn: He's well pleased with his New Holland 791 manure spreader. travel over some fairly rough ground to get to the field and this spreader takes the punishment with ease. I've had only one problem, a flat ‘tire, which the dealer took care of the same day. Very pleased with this product.” Mark's second ‘‘best buy" is his International 510 grain drill. ‘We've had absolutely no problems with it. The only thing that we would change would be to have double disc openers instead of single openers. We are especially pleased with the uniformity of the depth.” On the negative side, Mark's disappointed with his Allis Chalmers 185 tractor. ‘‘The motor has excellent response and it does have ample horsepower for its size but the fuel economy and gear selection are terrible.”

Best Buy
Milo Kolden, Vienna, S. Dak · Vol. 5, No. 5 (1981), p. 11

Milo Kolden, Vienna, S. Dak: “This is a well-built machine that does a good job on all kinds of small grain, corn and sunflowers. Excellent service from our dealer,”’ says Milo, pleased with his New Holland 1400 combine.

Best Buy
Robert Born, Hazel, S.D · Vol. 5, No. 5 (1981), p. 11

Robert Born, Hazel, S.D: He's unhappy with his Case 2390 tractor. “The fuel tank leaked, hydraulic and power steerifig hose ends popped off, the manifold gasket blew out, an injector line broke, the cab was dusty and the wheels would lock up and slide if you stepped on the clutch without first moving the power shift to the number one position. Did have good power, however.” Robert also reports some problems with his TR 70 New Holland combine. “The shafts and gear boxes were too light. Brackets fell off due to poor welds.” : . Robert adds that his 9350 John Deere drills and 7000 Max-Emerge planter have proved to be good purchases. ‘‘After using the drills last season, I’ve had no problems. The three 10-ft. drills have a hydraulic transport that goes from field to road position, or vice versa, without unhitching the ‘tractor. I've used the corn planter three seasons with only one breakdown,” J.W. and

Best Buy
Dean Monson, Gratiot, Wis · Vol. 5, No. 5 (1981), p. 13

Dean Monson, Gratiot, Wis: ‘‘It cost $16 to treat a cow for mastitis with it but it didn't clear up the problem,” says Dean, disappointed with “ImPro mastitis treatment from Pro-Ag, Inc. The idea behind it is that you don't have to throw the milk away while treating but I tried it on five cows and only one cleared up so the odds aren't too good. It would bea good idea if it worked better.” On the plus side, Dean's happy with his New Holland 489 haybine and his Metz Bale Kage. ‘‘We didn't think anything could beat the old 469 but the new 489 works even better and runs smoother than our old New Holland machine. With just the head floating, it really hugs the ground but bounces over rocks without breaking a guard or section. In the two years we've had it, we've only replaced one guard and a few sections and we do have some rocky fields. “Our Metz Bale Kage built by Metz Welding here in Gratiot, has to be the best on the market today. It's designed right and built strong. It should last for many years.”

Best Buy
Arthur Keuper, Ionia, Mo · Vol. 5, No. 5 (1981), p. 13

Arthur Keuper, Ionia, Mo: ‘‘! haven't seen much that this machine won't cut,” reports Arthur about his “‘best buy’’ New Holland 479 Haybine. “It'll cut through badly tangled fescue or brome at four miles per hour. And, there's been almost no expense on the machine after several hundred acres other than a few sickle sections. A pleasure to run.”

Best Buy
J. Robert Bishop, Leesburg, Ind · Vol. 5, No. 4 (1981), p. 10

J. Robert Bishop, Leesburg, Ind: Robert nominates his New Holland skid loader as ‘‘best buy"’. ‘‘This loader is low in height, which makes it good for our use. It handles easy and has a good reach when loading. We did have a chain break but they came out and fixed it the same day.”

Best Buy
James Taylor, Brawley, Calif · Vol. 5, No. 4 (1981), p. 11

James Taylor, Brawley, Calif: “After repeated computer, electrical and hydraulic malfunctions, we sold it to reinvest the money into something less hazardous to our nerves and pocketbook,"' says James, dissatisfied with his New Holland 1075 computerized hay bale stacker, He's happy, however, with his New Holland 500 hay baler. “‘Under many different conditions, this baler is able to produce nicely shaped bales for hours on end with very little to go wrong," he says.

Best Buy
Robert Klinkkammer, Anamosa, Iowa · Vol. 5, No. 4 (1981), p. 11

Robert Klinkkammer, Anamosa, Iowa: Robert's two ‘best buys” are his New Holland 513 spreader and an Astro farm building. ‘The spreader has been used daily with no problems, not even a loose bolt. The Astro building is well-constructed of excellent materials. No roof leaks or any other trouble.” Robert's had trouble, however, with his Homelite 150 automatic chain saw. “We had so much trouble with the chain saw that we easily spent as much as the purchase price for parts and service in the short time we owned it.”

Best Buy
Floyd Schaefer, Bellevue, Iowa · Vol. 5, No. 4 (1981), p. 12

Floyd Schaefer, Bellevue, Iowa: “We chopped corn that was blown down so bad one could scarcely see the rows but that 4-row head saved it all," reports Floyd, pleased with his New Holland 1895 forage harvester. “There were a few mechanical problems but they were promptly corrected. Their metal detector is unbelievably effective. It'll stop the feeder upon detecting even light gauge electric fence wire less than 6 in. long. Words can hardly describe how smooth this machine works."

Best Buy
Ray Bedel, Metamora, Ind · Vol. 5, No. 3 (1981), p. 10

Ray Bedel, Metamora, Ind: “lor the livestock farmer, there's nothing like it,” says Ray, pleased with his AO Smith Harvestore 2080 and 2535 silos. ‘We were grinding and mixing our own feed before and it became a daily chore. Now. with the flip of a switch, we have the best feed obtainable without the hassle. You only have to handle the feed once — when you put it in. “We also like our Slurrystore. Lets us hold manure from the dairy until time and weather let us put it on our fields.” On the minus side, Ray registers this complaint about his Massey Ferguson 180 tractor: ‘Had to have the multipower system worked on twice in one season. Also, the starter locks up on cold days.” A.J. McCashin, Jr., Mocksville, N.C.: He says all his ‘best buys" are New Holland equipment. ‘We like our 479 Haybine, our 263 baler, our 1001 bale wagon and our manure spreader. They all take little maintenance and we get the best service.” Kenneth and

Best Buy
Clark Collins, Jesup, Iowa · Vol. 5, No. 3 (1981), p. 11

Clark Collins, Jesup, Iowa: “The TR 85 does an excellent job in both corn and beans. It's easy to set, causes virtually no grain damage, and has the cleanest samples possible, even in tough weedy conditions. Dealer service has been excellent either day about his ‘best buy’? New Holland combine,

Best Buy
Raymond Schoen, Ft. Smith, Ark · Vol. 5, No. 2 (1981), p. 11

Raymond Schoen, Ft. Smith, Ark: “Everything bought from John Deere in the seventies turned into lemons,"' says Raymond, nominating Deere’s 4400 combine, 4430 tractor, his field conditioner and a 20-ft. disc. “The combine would throw over too much grain. The 4430 tractor had bad hydraulics the dealer says can't be fixed. The conditioner filled with trash and we had to make major repairs the first season on the disc. I've traded everything except the tractor, which I plan to fix myself if it can be repaired.” Raymond is pleased, however, with Case's 2670 4-wheel drive tractor and his two TR 70 New Holland combines. “This is my third 2670. I have two at this time. It has plenty of power, is built to last and used less fuel and costs less to buy than the Deere 8640. Good dealer service, “I've cut 8000 acres with the two TR 70's and have had fantastic results from them, They may last until retire, he concludes,

Best Buy
Dave Cahoon, Monona, Iowa · Vol. 5, No. 2 (1981), p. 11

Dave Cahoon, Monona, Iowa: Dave's happy with his New Holland 489 haybine. “We've run it through 500 acres of hay ground and haven't broken a single section. The floating head is fantastic. There has been nothing wrong with it yet.”

Best Buy
Dale Nichels, Murray, Neb · Vol. 5, No. 2 (1981), p. 11

Dale Nichels, Murray, Neb: “I'm very pleased with my New Holland TR 70 combine. Have run it two seasons with only minor problems. Capacity is excellent, can run 5 to 6 mph in 100 to 130 bu. corn with a 6-row head. Dealer service has been excellent. Am also pleased with my Broyhill weed wiper for use in soybeans. It really gets the weeds.”

Worst Buy
J.F. Leatherman, Healy, Kan · Vol. 5, No. 2 (1981), p. 12

J.F. Leatherman, Healy, Kan: His “worst buy" nomination goes to a used John Deere 6600 combine. “The day after we bought it one rear wheel fell off, ruining the hub bearing and spindle. Then, the engine wouldn't run at full rpm. Every day there was some kind of breakdown. A year or so later the rear axle broke in half. You never know which bearing will go out as they are sealed, You run them until they give out. Dealer service is good but it's a continual hassle guessing which bearing we will have to purchase and replace." Walter Wittwer, Chowchilla, _ Calif.: ‘‘This combine does the cleanest job of any combine. Grain is clean enough to be able to use for seeding. Also, sends less out the back. Had some problems with combine sheaves, but excellent dealer backup,” says Walter about his New Holland TR 85 combine. “On the minus side, we've had trouble with our Case 4490 4-wheel drive tractor,” he adds. ‘‘It steers hard and I've had nothing but trouble with the steering system. It also does not have the power it should have for a 4-wheel drive. Hard starting also bugs me. Only good thing is the dealer stands behind it.”’

Best Buy
Edmund Zelmer, Long Lake, S. Dak · Vol. 5, No. 2 (1981), p. 12

Edmund Zelmer, Long Lake, S. Dak: ‘‘They've made so many improvements on this machine over the old model 1033 that it's really trouble-free and makes a perfect stack,"’ says Edmund about his New Holland 1037 bale wagon. He's disappointed, though, with his Farmhand 7-wheel rake. ‘The frame is built too weak, It has broken in three different places already and we had to reinforce it. The dealer said that he hadn't had any complaints before, and didn't do anything about ‘

Best Buy
Paul Rauh, New Weston, Ohio · Vol. 5, No. 1 (1981), p. 10

Paul Rauh, New Weston, Ohio: “We can't get it to cut level.” says Paul about his 2300 Allis Chalmers 16-ft. disk harrow. ‘‘The dealer came out to adjust it, but couldn't do any good. He sent for a field serviceman who spent a full day in the field and was unable to help. We ordered a new frame but that did no good.” Paul's happy, though, with his New Holland L775 skid steer loader. “It performs great. It's a heavier machine and won't tip as easy as competitive models. No trouble learning to operate it. It's simple to drive.”

Best Buy
Russell Hunink, Clymer, N.Y · Vol. 5, No. 1 (1981), p. 10

Russell Hunink, Clymer, N.Y: “It's possible to kill a few flies with it but you have to drown them with it. Very ineffective,” says Russell, disappointed with “Whitmire Flys-Off dairy aerosol insecticide.” On the plus side, Russell has three nominations for “best buy”. The first is his WIC 30 bu., battery-operated silage cart. ‘‘We've used it for over a vear, unloading eight hours a day, with almost no problems. It's a much simpler cart than a previous one of a different make. “Another good buy is our Deere 4240 tractor with power assist front wheels. The cab is both comfortable and quiet. The large cubic inch engine responds at all speeds and the power front-wheel assist has worked well in pulling through soft spots in the fields. It's easy to handle, making it an ideal tractor for my wife and daughter to drive. “We're also happy with New Holland's 2438 tandem axle running gears,” he adds. “They're well-built and travel well on the road, besides carrying loads well on soft ground.”

Best Buy
Thomas A. Votipka, Belvidere, Neb · Vol. 5, No. 1 (1981), p. 11

Thomas A. Votipka, Belvidere, Neb: "Il keep asking myself why I didn’t buy one earlier,” says Thomas about his new 16-ft. Hale stock trailer. “Within the last four months, we have transported milk cows, calves. furniture, firewood. and hay, The best feature is its low profile and capacity, We pull it behind our 3/4ton. pickup, but have also pulled it with a 1/2-ton. “ have another recent purchase which I think will prove to be a ‘best buy’, adds Thomas. "I boughta New Holland 1038 Stackliner but haven't had a chance to use it because I purchased it in the off season. The bale wagon has a capacity of 104 bales. It picks up. loads, hauls, stacks, retrieves and unloads one bale ata time. I feel it will be a great asset to my operation and plan on doing custom work with it next summer.”

Best Buy
Earnest Sorensen, Ceylon, Sask · Vol. 5, No. 1 (1981), p. 11

Earnest Sorensen, Ceylon, Sask: This baler made 1,560 bales last year with only minor adjustments and regular servicing,” reports Earnest, pleased with his New Holland 845 auto-wrap, 800-lb. round baler. “The baler trips and ties in one simple op eration, saving time while shifting and backing to drop the bale. The ‘super sweep’ pick-up on the baler is one of the best. It enables the operator to getall of the finer hay and the chaff when baling straw. Because this machine is chain type, believe it will wear longer than a belt-type baler.” Ed and

Worst Buy
Martin Wright, New Salem, N. Dak. · Vol. 4, No. 6 (1980), p. 10

Martin Wright, New Salem, N. Dak.: ‘‘My worst buy is my New Holland 320 square baler with hydraulic tension. The baler has plungers runee linate ning at up to 105 strokes per min. with the tine bar at the same speed and you cannot keep this rear assembly together. I can’t keep it running. Dealer service has been fine but we still can't bale much hay.” He's pleased with his 1979 Ford 150 4-wheel drive pickup, despite some problems. ‘I've driven Ford pickups for a long time and have had good performance but the engine went out of this 1979 at 6,000 miles and had to be replaced. My dealer did a good job and performance since has been excellent.”

Best Buy
Garry Graham, Bristol, Quebec · Vol. 4, No. 6 (1980), p. 11

Garry Graham, Bristol, Quebec: “This baler would not tie. After repeated adjustments by my dealer it performed better. However, it still misses about one bale in ten,”’ reports Garry about his New Holland 310 baler, “Also, when you change from one crop to another it needs to be adjusted to make it tie.”

Worst Buy
Dale Woods, Reed City, Mich · Vol. 4, No. 6 (1980), p. 11

Dale Woods, Reed City, Mich: “You can put up more hay in a shorter time when the hay is at the right stage. Let's you get the best protein content, It's also a labor saver. Very efficient!’ says Dale about his New Holland 851 baler. Dale has no “worst buy” to report, but notes, ‘We bought a used John Deere combine this year because of the enormous prices for new ones. The price we get in return for our farm products is so uneven in comparison.”

Best Buy
Richard B. Sigle, Luray, Kan · Vol. 4, No. 6 (1980), p. 12

Richard B. Sigle, Luray, Kan: Richard's happy with his Krause model 901 18-ft. flexible tandem disc. “It’s easy to set. Does a perfect job on level ground or on our terraces. There's no side draft.”’ “Another best buy would be our New Holland 851 large round baler,” adds Richard. “It makes a beautiful bale. Ties it just the way you want il and picks up every bit of hay. Easy to service, too. Seems that every piece of New Holland equipment is engineered with the farmer in mind, That's important when we’re buying.

Best Buy
James Ebenhok, Claremont, Minn · Vol. 4, No. 6 (1980), p. 12

James Ebenhok, Claremont, Minn: “If enough farmers with this same problem would get together, perhaps they could get a compromise settlement,” says James, upset with an International 1066 tractor he bought new. “The sleeves deteriorated in 2,600 hours, ruining the engine because antifreeze ran in. The company blames it on water but the water in it happened to be the original water that was in the tractor when purchased it. The sleeves were pitted around the seals and all deterioration was on the same side of every sleeve. know several other farmers with the same problem and feel there is a manufacturing problem the company won't acknowledge. Very costly to repair the engine. I'd never buy a used 1066 — the engine is headed for trouble.” On the “best buy” side, James is happy with his New Holland 679 spreader. Its capacity and style fit my beef operation just perfect, Easy to load into, The gearbox did give out but the company warranty stood by it. Also like my new Westfield auger, made in Canada. Handles easily for a 51 ft. auger and runs smoothly.”

Best Buy
Donald Simonson, Turton, S. Dak · Vol. 4, No. 6 (1980), p. 13

Donald Simonson, Turton, S. Dak: ‘This may not be my worst buy, but I think the manufacturer's advertising was misleading," says Donald about the Tenderfoot Shifter for IH tractors. by M & W. Gear Co. “The shifter works good to a certain degree. But, you have to be extremely careful depressing the clutch so as not to use it as a brake. bought it under the impression that anyone could drive the tractor. As of today, I am the only one that can use it successfully. Dealer service has been good.” Donald's pleased with his International model 480 24-ft. tandem disc. “I've had compliments from neighbors on the fine condition of my fields, Does a fine job preparing a seedbed. It’s easy pulling and does everything the ads said it would.” Reuben Luetchens, Murdock, Neb,; ‘‘Have had almost no expense besides regular maintenance on more than 1,000 acres,’ Reuben reports about his ‘‘best buy’ TR 70 New Holland combine. ‘Has great capacity and does a good job on corn, soybeans, wheat and oats —all the grains we use it on.” Reuben's unhappy with his Stanhay Jumbo six-row mounted planter bought three years ago. ‘‘It’s strongly built and gives fairly good service with little expense, but there’s almost no dealer service.”

Best Buy
Leonard Keeven, Lincohton, N. C · Vol. 4, No. 6 (1980), p. 13

Leonard Keeven, Lincohton, N. C: ‘It's the best machine purchase I ever made,” says Leonard about his New Holland 1033 bale wagon. “It eliminates the need for labor in making hay. The machine paid for itself in the first year. “My 1630 John Deere disk-harrow was one of my worst purchases,” he adds. “The harrow simply will not cut and level like it should. No comparison with an offset harrow.”

Best Buy
Vernon Stinzi, Sleeman, Ont · Vol. 4, No. 5 (1980), p. 10

Vernon Stinzi, Sleeman, Ont: “My Massey Ferguson 1135 had 16 downtime-causing failures in two years. Then, at 1450 hours, it was out for four months requiring a complete new rear end, hydraulic pumps, and power shift, Three part time unlicensed mechanics did this last major repair and among other things, they forgot to tighten the bolts at center housing — the tractor could have split apart in the field. The mechanical deficiency necessitating this last major repair was known to MF when the new tractor was delivered, but neither nor the dealer were advised. “The 3-pt. hitch was out of commission for two years. In the last 18 months I've bought $85,000 worth of new equipment without even looking at MF. But plaudits to New Holland for their 495 haybine and 851 baler, and Versatile’s four-wheel drive utility tractor. It's a jewel.”

Best Buy
John D. Nelson, Ashburn, Ga · Vol. 4, No. 5 (1980), p. 11

John D. Nelson, Ashburn, Ga: “This truck rides like a two-horse wagon and wouldn't pull the hat off your head. Gets about 15 miles per gallon,’ reports John about his “worst buy’? Chevy Luv pickup. “Replaced all engine gaskets at 2,900 miles and traded it back to the Chevrolet dealer at 5,900 miles. Was ever glad to get my money back. Traded it for a Chevrolet diesel. So far, so good.” “This has got to be the smoothest running combine on the market, It's “This truck wouldn’t pull the hat off your head.” replacing two 510 Massey Ferguson combines,’’.says John about his “best buy" New Holland TR 85, “Had no trouble at all to speak of."

Best Buy
Baron L. McCaskill, Jr., Cayce, S.C · Vol. 4, No. 5 (1980), p. 11

Baron L. McCaskill, Jr., Cayce, S.C: ‘I'm most happy with two recent purchases — a Massey Ferguson 720 disc and a Tumblebug large round bale carrier, However, both have minor problems. The rubber bumper that the Tumblebug fork drops down on is attached with two small screws which should be strengthened. The furrow tiller disc-mounting bracket on the MF harrow is cast and much too light. If you catch it on even a small sapling around the edge of a field, it will break, Otherwise, the disc is a real heavy-duty workhorse." Baron's disappointed with a New Holland 975 combine he bought used. ‘It’s never run more than half a day without minor or major repairs, My fault for making the purchase but the manufacturer could have designed the cab and header so that you could see the cutterbar without laying your belly over the top of the steering wheel.”

Worst Buy
Joe Hay, Bangor, Mich · Vol. 4, No. 5 (1980), p. 12

Joe Hay, Bangor, Mich: Joe's “worst buy” nomination goes to his “Ford power washer. The third time we used it, the handle broke. Then it stopped and we had to take it apart to be able to push the reset. The next time we used it the pump developed a noise. Went back and told the dealer and he laughed and said, ‘Yup, those things are no good. You ought to buy a better one’."” On the brighter side, Joe’s pleased with his New Holland grinder-mixer. “They built it with the farmer in mind. Easy to run and service, and runs smooth and quiet. Best of all, the dealer won't forget who you are after the sale is made.”

Best Buy
John Lemmermann, Helena, Ohio · Vol. 4, No. 5 (1980), p. 12

John Lemmermann, Helena, Ohio: “We used this piece of equipment on more than 600 acres of cropland last year and found that following fall tillage, one pass in the spring provides an excellent seedbed. The best part is that this piece of equipment is handled by the same dealer that keeps our New Holland TR 70 combine and Ford tractors in top shape," says John about his ‘‘best buy" Kongskilde, Triple K 21-ft. field cultivator, > YOU CAN USE nly selected 5 “tell it like 1 nominating pest” and ” buys. old Johnson OT k Newhall ociate Editor ers Now Worst B

Best Buy
Bob Bishop, Cobb., Wisc · Vol. 4, No. 3 (1980), p. 10

Bob Bishop, Cobb., Wisc: “Our hay the size ofa fist. They caused nothing but trouble in sickle repairs and adjustment in our previous machine,” reports Bob, happy with his “best buy"’ New Holland 489 Haybine. “We've covered 500 acres with the 489, traveling between 5 and 7 mph, and have replaced only 7 or 8 sections and one guard. The unique header design allows this machine to float over anything and still cut clean at high speed.” “Another ‘best buy’ is our 8-row International 3-pt. mounted rotary hoe,” he told FARM SHOW. “With more than 900 acres behind it, we've lost one cotter pin and had one mounting link break. Nothing else. The machine is simple in design with no bearings to fail. Instead, it has boxings similar to those on our last machine, which lasted 20 years, We cover a lot of ground in a hurry with this machine,”

Best Buy
Neal Knip, De Motte, Ind · Vol. 4, No. 3 (1980), p. 12

Neal Knip, De Motte, Ind: Neal's happy with Milwaukee polishers and grinders. ‘‘These are industrial strength small shop tools built to stand up to lots of use. The guarantee is good, and so is the service, when needed. “By the same token,” continues Neal, ‘‘we bought a Wen grinder that lasted one hour. We exchanged it for another that lasted one-half hour. We sent it in for repair and it didn’t even run when it came back, so we tossed it in the scrap pile. It was a cheaper grinder but in the end, it was a lot more expensive. Bargain drill bits and other shop tools are no bargain,” Ashley C-60 Automatic Wood Heater: This stove has cut our heating oil bill to practically nothing,” reports an unnamed FARM SHOW reader. ‘We set our conventional furnace at 65° and the only time it comes on is early in the morning if the temperature drops well below zero. You never have to light the stove because it holds its fire overnight. Just pile on more wood, “This round baler is probably no better than any other round baler. It's the bales themselves like,"' continues the reader, adding New Holland's 851 big round baler to his “best buy” list. “It's a great way to make hay, saving tremendous amounts of labor over conventional methods, and gives me a chance to enjoy my summer much more.”

Worst Buy
Stanley Grabowski, Interlaken, N.Y · Vol. 4, No. 2 (1980), p. 13

Stanley Grabowski, Interlaken, N.Y: “The only problem with this machine is that to change the sickle drive belt you have to take half the side off — a days work,” says Stanley about his otherwise satisfactory New Holland H-79 Haybine. He says he's completely satisfied with Fahr’s hay tedder. “Lets you make hay in half the time by allowing the hay to cure twice as fast. No problems at all. “Another good buy was our Allis Chalmer's ''K”’ combine. Does a good job of cleaning and will go through heavy mud. Little trouble, except the engine caught fire, but I had a new one in three days because the company took one off the assembly line. Drove 1,100 miles to get it.” Stanley nominates his Grove kicker hay rack and wagon asa ‘‘worst buy”. “The sides weren't made strong enough. The floor rotted out and the axle broke."

Best Buy
Barry Denison, Metcalfe, Ontario · Vol. 4, No. 1 (1980), p. 12

Barry Denison, Metcalfe, Ontario: “If every machine and dealer were this good, farming would be a breeze,’ says Barry who is happy with his New Holland 1034 automatic bale wagon. ‘I've used the machine two haying seasons for 40,000 bales, and it's done everything well. Last year, never lost 10 min. of time because of problems. Highly recommend it to anyone short on labor who puts up a lot of hay."

Best Buy
Michael De Sutter, Marshall, Minn · Vol. 4, No. 1 (1980), p. 14

Michael De Sutter, Marshall, Minn: He's happy with his ‘best buy" New Holland 273 square baler. “I'd never buy a tractor that’s a different color than what the dealer sells.”’ “Have only used it one year but have had no trouble at all. Runs as smooth and quiet as a sewing machine,”’ On the negative side, Michael notes that, “I'd never buy a tractor ina dealer's lot that is a different color than what the dealer is selling.”’ He's disappointed with a used John Deere he bought from an International dealer. “I have a hard time starting it. The battery is always down. Two different mechanics worked on it, but I still need a battery charger to start it. like John Deere but have a lemon here.”’

Best Buy
James McFallen, Union City, Penn · Vol. 3, No. 6 (1979), p. 9

James McFallen, Union City, Penn: ‘Dealer service has been excellent but it would take an act of God to make that machine work right,” says James about his “International No. 10 green chopper. The discharge chute breaks about every two weeks and is a piece of junk. The dealer installed a new one that lasted about a week, The spout control is hard to reach and, on uneven ground, the machine picks up more dirt than grass. The thing keeps falling apart.” “It would take an act of God to make that machine work right.” On the plus side, James nominates his Gehl 800 chopper as a best buy: “Changing heads is a snap and I've done it several times in less than 15 minutes. The hydraulic knife grinder works well and the machine has about three times the capacity of my New Holland.”

Best Buy
Richard Ferrell, Barclay, Md · Vol. 3, No. 6 (1979), p. 9

Richard Ferrell, Barclay, Md: ‘ sent my issue of FARM SHOW (Vol. 3, No. 4) with the story defending Ray Stueckle and his combine modifications to New Holland's engineering department,” says Richard, who has used Stueckle’s modifications on his own New Holland 1400 combine. “Ray's recommendations helped me switch from harvesting chewed up corn to whole kernels.” Richard's other ‘“tbest buys’ include his Stoltyfus wet lime spreader, and his Moore Uni-Drill, which he read about in FARM SHOW. “The spreader can spread up to 100 tons a day pulled behind the tractor,” he says. “The Moore drill did a very good job planting no-till soybeans 5 in. apart in wheat and barley stubble.”

Best Buy
Dee Keeton, Kingston, Okla · Vol. 3, No. 6 (1979), p. 10

Dee Keeton, Kingston, Okla: “What more could I ask?" says Dee about his “best buy” John Deere 4440 tractor. “Tremendous lugging power and doesn’t use oil. Good service on every little minor thing that has gone wrong.” Ag-Team’s all-cut disk also rates as one of Dee's best buys. “It's the most massive, heaviest, best built disk I've ever owned. Does an excellent job of cutting up surface trash and leveling in soft broken ground. However, it takes at least a 4440 to handle it. “This unit has given good service with a minimum of repair,” says Dee about his “best buy’ New Holland big round baler, “Other round balers use belts which break but we've had no trouble with chain breakage. Our sandy soil is hard on chains but with proper maintenance, they give good service.” Other “best buys” on Dee's list are his Dodge 3/4-ton power wagon pickups and his 1979 Volkswagen Rabbit hatchback. *‘We have two Dodge trucks and they're the best, toughest 4-wheel drive vehicles I've ever owned, Unlike some others, they haven't nickled and dimed me to death. They don't use oil, have plenty of power and carry a big load. “We bought the Rabbit when we sold the family car because of high gas prices. After testing major brands of economy cars, we settled on the Rabbit because it had the most room. Gets over 30 mpg any way you drive it, doesn’t use oil, is easy to drive and 10 OFARM SHOW 3-© or two adults and three big kids. Our gas bill went from $100 a month to $25. We wanted a Rabbit diesel, but the waiting list was too long.” On the negative side, Dee notes that “my worst recent purchase was a “Best 4-wheel drives — they haven't nickled and dimed me to death.” Vicon power harrow. This tool has been nothing but trouble,”

Best Buy
Steve Valeriano, Bernville, Penn · Vol. 3, No. 6 (1979), p. 10

Steve Valeriano, Bernville, Penn: Heading his ‘‘best buy” list is Aatrex “Nine-O” herbicide in pelleted form. “Disolves as soon as it Contacts water and doesn't settle out when it sits. Costs just a little more than powder and less than liquids.” Steve's also been pleased with his 4230 Deere tractor, and his New Holland 273 baler and thrower. ‘I've owned several brands of tractors but none as convenient and comfortable to work with as the 4230. And the baler is a real workhorse, and trouble free,"

Best Buy
Richard Mayer, Cobleskill, N.Y · Vol. 3, No. 6 (1979), p. 11

Richard Mayer, Cobleskill, N.Y: “Does a superior job of mowing,” reports Richard about his International 990 mower/ conditioner. “'Glides over woodchuck holes instead of through them, like the New Holland 469 we had before. Knife and guard replacements have been minimal.” On the negative side, Richard's unhappy with his Leyland 384 tractor. ‘The tractor seemed to be in the shop whenever there was work to be done and never Nad any puilinys power. The cooling system was always heating up until the dealer finally put new sleeves in it, It then developed an oil leak which the dealer said he was going to come and fix but never did. We ended up trading it for an International 966." Philip M. Sprenkle, Spring Grove, Penn,; “I bought 5 gal. to try on alfalfa and did one half of a field with it. Couldn't see that it made a difference,” says Philip about Medina soil additive. ‘It seemed to me like a waste of money. I won't buy any more.” On the plus side, he’s pleased with his 1460 International Axial Flow combine. “I can start earlier in the morning and work longer in the evening. Works swell in grain, doing everything they said it would, and service is good, too. Fewer moving parts than on our old 815."

Best Buy
James R. McMillan, Phillipsburg, Mo · Vol. 3, No. 6 (1979), p. 11

James R. McMillan, Phillipsburg, Mo: “A well-designed machine that really works," says James describing his ‘best buy’ New Holland 850 round baler. “After using it one season and observing competing belttype balers, can’t see how they even sell one.”

Best Buy
Sam Grabill, Audubon, Iowa · Vol. 3, No. 5 (1979), p. 8

Sam Grabill, Audubon, Iowa: “The worst purchase I made was not necessarily the fault of the equipment but the engineer who designed it,” says Sam, who is disappointed with his Massey Ferguson 285 tractor. “‘It wouldn't steer with the loader off the ground from the first day bought it. The dealer replaced everything he could think of and it did no good. Then, the company experimented with different length steering arms, which also did no good. Finally, they replaced one cylinder it came with with two, and added a new pump, which made a big improvement. A tractor of that size and horsepower is made for a loader and you'd think they would have these problems taken care of before they put them on the market,"’ Sam told FARM SHOW. On the positive side, he says his 915 New Holland spreader ‘‘has done everything it was designed to do, Linate With the hydraulic slop gate, you can haul anything you can get into it,”’ he says.

Best Buy
Walter Brown, Foreman, Ark · Vol. 3, No. 5 (1979), p. 8

Walter Brown, Foreman, Ark: He's disappointed with a 12 row cultivator which, he says, “I bought over the phone from Dickey Machine Works. told the man I had heavy black soil and he assured me the machine could do the job. Once in the field, the bearings went out on the gauge wheels and bolts holding the shovels started breaking. We lost 20 shovels in two days. Everything started to bend. It was just too weak. “Two company men came out. They worked on it all day. The next day we went to the field with it and the same things happened all over again. Then, driving down the road, the right wing fell off. Next day, the other one fell off. My son and I spent two days welding it back together.” Walter adds that his “‘best buy" is his 7100 Deere planter, “We used it on 2,500 acres and had very few problems.” Vincent Raymond, Watson, OKL.: He's pleased with his "best buy"’ New Holland 845 round baler: “Gets the bales started easily and has operated trouble-free. It's a good machine.”

Best Buy
Victor Laskowski, Yuba, Wis · Vol. 3, No. 5 (1979), p. 9

Victor Laskowski, Yuba, Wis: Victor's excited about his New Holland 489 Haybine. “It's one of the best haymaking machines on the market. Never plugged once and the floating header works great over stones or rough ground.” “Tt was a lemon from the engine back.” Victor adds that ‘‘my worst buying experience was the purchase in 1971 of a John Deere 4320 tractor with hydraulic front-wheel drive. It was a lemon from the engine back. First the drive disintegrated and deposited debris in the transmission and hydraulics. After the oils were drained, it took nine filters before the hydraulics would work again. The front drive fell apart two more times. The clutch and pto have been replaced four times. With only 3069 hours on it, the tractor has been in the shop 26 times for repairs.”

Best Buy
A. M. Curry, Maysville, Ark · Vol. 3, No. 5 (1979), p. 9

A. M. Curry, Maysville, Ark: He says his 890 New Holland forage chopper “is the best forage harvesting machine I’ve had in 20 years of farming."

Best Buy
Roy Reuter, Monticello, Iowa · Vol. 3, No. 5 (1979), p. 9

Roy Reuter, Monticello, Iowa: ‘We used it to move snow last winter and found it has extra reach to load over the fence. Very handy also for loading manure and getting into small places,” reports Roy about his “best buy" 425 New Holland skid steer loader.

Best Buy
Allen Davis, Bladenboro, N.C · Vol. 3, No. 5 (1979), p. 9

Allen Davis, Bladenboro, N.C: Responding to a reader in an earlier issue of FARM SHOW who wondered “if International Harvester ships their parts by mule train,” Allen offers this rebuttal: ‘Although IH may leave a lot to be desired, they would be hard to beat around here for parts service. Sometimes they may not stock as many parts as other dealers but their equipment doesn’t break down as often either.” Allen also put in a plug for his bale equipment — a New Holland 850 round baler and a Tumblebug bale mover. ‘The baler has been no trouble so far and the Tumblebug takes the sweat out of picking up big round bales. With the machine attached to my Scout, hauling hay is as simple as just riding around.”

Best Buy
Benny Erickson, Leonard, Minn · Vol. 3, No. 5 (1979), p. 9

Benny Erickson, Leonard, Minn: “This baler has been terrific for hay and custom-baling flax straw," says Benny about his New Holland 273 baler. “It’s a little low on intake but real good for the size.” Benny is disappointed with his New Holland 278 baler. “This baler is just too high-speed. It knocks out Ujoints and the overriding clutch. Besides that, it ruins just about any power take off on the tractor, plus it vibrates the bolts out of tractor drawbar.”’

Best Buy
Delwin Kellerman, Oshkosh, Wis · Vol. 3, No. 5 (1979), p. 10

Delwin Kellerman, Oshkosh, Wis: “I bought it for its fast change from fill to feed and found it's everything they say it is and more. Service, if needed, is good," says Delwin about his ‘‘best buy” Big Jim silo unloader from Jamesway, He's also pleased with his New Holland 791 manure spreader. “The hydraulic tailgate is great for holding liquids in and getting to the field with a full load.”

Best Buy
David Hawker, Frederick, Md · Vol. 3, No. 5 (1979), p. 10

David Hawker, Frederick, Md: His ‘best buy" nomination goes to his 519 New Holland manure spreader, "Works real well — even shredded two feed buckets which we'd placed in the machine before loading and forgot about.”

Best Buy
Jim Toney, Stockbridge, Ga · Vol. 3, No. 4 (1979), p. 9

Jim Toney, Stockbridge, Ga: ‘I'm really pleased with my New Holland 478 Haybine. It’s the best mowing machine that I've ever used, mowing downed and wet hay with great ease. Never seems to plug and makes fluffy windrows that dry fast.”

Best Buy
L. M. York, Hartwell, Ga · Vol. 3, No. 4 (1979), p. 9

L. M. York, Hartwell, Ga: He's happy with his New Holland TR 70 combine. “Does a good job threshing and cleaning any crop with little damage to the grain. It’s a well-built machine, easy to service and operate, and we like the cab. The company put on update packaging for no cost, something some other companies won't do. The only thing it needs is a guard rail around the engine service area. *‘My worst disappointment has been my 1086 IH tractor. The cab is one of the hardest to get in and out of that I know of. The short wheelbase does nothing for handling, and changing gears is something out of the stone age. The rear fuel tank location is poor, as is the cab air filter. Very poor design overall but has a good engine.”

Best Buy
Alwin Stauffer, Jamestown, Mo · Vol. 3, No. 4 (1979), p. 11

Alwin Stauffer, Jamestown, Mo: He's had trouble with his John Deere 410 round baler. “Once the core formed, it would bale okay, but we had trouble getting it started. The belts would swing out of line and jam the machine to a dead stop.” Alwin traded it off for his “best buy” New Holland 845 baler. ‘This machine has no faults that know of. No trouble starting the bale core and it makes a nice bale,”

Worst Buy
Ray Coleman, Berlin, Penn · Vol. 3, No. 4 (1979), p. 11

Ray Coleman, Berlin, Penn: He's pleased with his New Holland grinder mixer. “I like the quality of feed it makes and we've never had a bit of trouble with it." He nominates his Massey Ferguson 160 manure spreader as his ‘worst buy”. “The web broke before it was a week old. We put a new one in and that broke in six months."

Best Buy
Jerry Duerfeldt, Falls City, Neb · Vol. 3, No. 3 (1979), p. 9

Jerry Duerfeldt, Falls City, Neb: He nominates his New Holland 489 Habine as a “best buy”. “I owned a New Holland Haybine before but this new one cuts closer, runs smoother, and performs even better. It flexes for terraces and ditches, and requires minimal maintenance.”

Best Buy
Earl Thompson, Sylvia, Kan · Vol. 3, No. 3 (1979), p. 10

Earl Thompson, Sylvia, Kan: “'l highly recommend this machine,” says Earl of his ‘‘best buy" Sperry _ New Holland 320 twine pto baler. “Makes tight, well-formed bales and has large capacity. We get prompt, . efficient service when needed.” : lames

Best Buy
John Ziegler, Newton, Wis · Vol. 3, No. 3 (1979), p. 10

John Ziegler, Newton, Wis: He's happy with his New Holland 1400 combine (‘‘Does a good job of gathering and cleaning, and has good capacity”) but notes that he has had trouble getting grain to go up the feeder into the cylinder “Also, the engine — a Ford diesel — loses its prime and is very hard to start.”

Best Buy
Raymond Nolt, New Holland, Pa · Vol. 3, No. 3 (1979), p. 11

Raymond Nolt, New Holland, Pa: He's well pleased with an electric 'vre Spike prod for hogs from Franklin Laboratories. “It has a short section for using it with hogs. For cattle, an attachment is available which extends the reach."

Best Buy
Terry Vollmer, Oxford, Ohio · Vol. 3, No. 3 (1979), p. 11

Terry Vollmer, Oxford, Ohio: Terry nominates his IH 1486 and 1586 tractors as ‘‘best buys’’, as well as two Model 720 IH 6-16 plows. "I like the way the two tractors handle, the comfort of the cabs and, especially, the ease of maintenance,” reports Terry. “Last season we plowed over a thousand acres and only had to stop twice to unplug the plows. This was in all kinds of conditions and in all types of weather.” Terry had some trouble with his New Holland TR-70 combine but was well pleased with its overall performance. “We had five breakdowns that required the dealer to come out and repair. We received excellent service, even though we are more than 60 miles away. Despite the down time, we were very pleased. “Probably the best buy ever made is my 1975 Ford F-250 pickup. The truck has over 80,000 miles on it with only regular maintenance. We use it to tow gravity wagons and haul fuel, along with all of our tools. Some of our acreage is 25 miles apart so it has been put to the test.” W. Wayne Johnson, Salina, Ks.: He's well pleased with his Great Plains Grain Drill. “Its 30-ft. field width can be in road position in less than 24 min. It's flexible and easily maneuverable in the field as well as on the road. The 75 bu. capacity cuts down on drill-fill stops.”

Best Buy
James Brooks, Siler City, N.C · Vol. 3, No. 2 (1979), p. 10

James Brooks, Siler City, N.C: “This cutter is a tough, heavy-built machine. It chops your crop uniform whether it's corn or small grain,” says James of his 890 New Holland silage cutter,

Best Buy
Don Schmaling, Delavan, Wis · Vol. 3, No. 2 (1979), p. 11

Don Schmaling, Delavan, Wis: “This has got to be the easiest plugging blower available today. Also very hard to get at to replace the shear pins. A real lemon,” says Don of his “New Idea forage blower". On the plus side, he’s happy with his New Holland pull type 479 Haybine. “This is a truly fine machine. Provides fast cutting. Makes even, fluffy windrows that dry out fast. Almost a plug-free machine.”

Best Buy
Donald Griffith, Glenwood, Mo · Vol. 3, No. 1 (1979), p. 12

Donald Griffith, Glenwood, Mo: “The best buy have ever made in haying equipment is my Vicon disk mower. After owning mowers by Deere, International and David Bradley, and windrowers by Hesston, New Holland and Deere, and an MC Rotary Scythe, wish very much that could have had a Vicon 34 years ago. We mowed 710 acres of hay last summer and never had to stop mowing, despite a lot of rocks and multiflora rosa. We replaced a few blades but never had to stop mowing because of rock damage or rain. Mowed many acres at night. Mowing in conjunction with a New Holland windrower in alfalfa, the Vicon-mowed hay was able to be baled in big bales a day before the windrowed hay, beating a disastrous 4 in. rain.”

Best Buy
Earl Aeker, Piedmont, Ala · Vol. 3, No. 1 (1979), p. 14

Earl Aeker, Piedmont, Ala: ‘It really holds the ground. Floats over rocks and ridges real good. Gets more 14 C FARM SHOW 2- st” Buys page) beans than a ridgid cutter bar,” says Earl of his ‘best buy” Deere 4400 combine with flexible cutter bar platform. Donald H. Meierhofer, Minonk, IL: ‘I'm very well satisfied with the service and clean grain samples from my New Holland TR-70 combine. The Cat 3208 engine could use a lit“We use a Deere header on our TR-70 combine. Works great.” tle more power when unloading heavy corn on the go. We bought a Bish Header Adapter Kit, which allows us to use a John Deere 6-row corn and row crop header on the TR-70. Works great.”

Best Buy
Leonard Juhnke, Sedgewick, Kan · Vol. 3, No. 1 (1979), p. 14

Leonard Juhnke, Sedgewick, Kan: He's unhappy with his New Holland TR70 combine: ‘Motor, radiator and all cooler screens constantly plugged with chaff. Hydrostatic drive would not pull or propell the machine. Hydraulics would not function due to overheating. Header platform would not feed wheat. Main shaft bearings failed at 246 hours. Four drive belts broke in the first 246 hours. Other constant trouble. The dealer gave the best service he could.”

Best Buy
George Huber, Herreid, S. Dak · Vol. 3, No. 1 (1979), p. 14

George Huber, Herreid, S. Dak: “I've baled more than 2.500 bales and haven't had any trouble.”’ says George of his “best buy’’ New Holland 850 round baler. He’s unhappy, however, with his 655 Massey Ferguson 18 ft. swather. **We have breakdowns daily. The sealed bearings go out because of lack of grease. Sickle head dropped off. Very poor welding. Sway bar bracket cracked because the metal is half as thick as it should be. Platform is bowed quite badly — needs more support. It’s made of too light metal, Tension springs for the platform bolts break off. Vibrates excessively at 3/4 speed and faster, On the plus side, lam happy with the hydrostatic drive."’

Best Buy
Frank Thomas, Danville, Ind · Vol. 2, No. 6 (1978), p. 8

Frank Thomas, Danville, Ind: Frank Thomas, Danville, Ind.: He's “sold” on his New Holland Haybine. “Has made us money. It's a joy to run and well made.”

Best Buy
Stanley Crowder, Cherokee, Okla · Vol. 2, No. 6 (1978), p. 9

Stanley Crowder, Cherokee, Okla: Stanley Crowder, Cherokee, OKL: He's disappointed with Monsanto's herbicide Roundup. “I have used it for 2 years in trying to control bindweed. Followed directions exactly and have not received any results.” Stanley nominates a super 1049 New Holland bale wagon as one of the best buvs he's made recently: “It's approximately 18 months old and has given virtually no problems,”

Best Buy
Arlo Skari, Chester, Mont · Vol. 2, No. 6 (1978), p. 9

Arlo Skari, Chester, Mont: Arlo Skari, Chester, Mont.: He notes that his New Holland baler No. 278 “has performed flawlessly. It's well made and I'm well satisfied with it. [like the fact that it is able to hold 6 rolls of twine so it can bale for several days." Arlo’s unhappy with his 1/2 ton 4/4 Chevrolet pickup, a 1976 model which he bought new. “Works well but evidently has a weak spring on the right side as it sags, and the doors and tailgate don't open and close properly. Local dealer has worked on it but he and the company are reluctant.to admit what the real problem is, and so it goes unfixed, We have had GM products before but their handling of this problem has us considering whether to buy any more from them. We will undoubtedly fix it ourselves instead of going through all the hassle.”

Best Buy
Bill Knoff, Nashotah, Wis · Vol. 2, No. 6 (1978), p. 10

Bill Knoff, Nashotah, Wis: Bill Knoff, Nashatah, Wis.: “Why must the farmer who pays for high priced machinery make all the modifications necessary to get if to run right? had so many problems finally got rid of it and went to 30 in rows,” says Bill of his “Burch twin row corn planter. Everything went wrong with it. Chains kept breaking with no slack adjustments on them, bushings were used instead of bearings. No monitor available until adapted one to work.” Bill is well pleased with his Glencoe Soil Saver. “It's a chisel plow with twisted shovels, and with cutting disks in front. Does an excellent job of saving time and no breakdowns. Built very rugged and needs “Why must the farmer make all the modifications to get it to run right?” 15 hp. per shank to doa good job, We go about 6% - 7 mph. Rocks are no problem with the disks in front — they give when encountering obstacles." Bill also nominates his New Holland 1400 diesel combine as a best buy. “Very well made. No problems in 3 years. Wouldn't be without the monitor. It does an excellent job of telling you when something is wrong. Only thing that could be improved is the service platform on the side of the machine it could be made wider, and some moving parts could be made more accessible for service work,” Bill adds that his Case 1070 and 1370 tractors “have excellent cabs — both for comfort and visibility and noise, Servicing is very easy. Never any problems with the power shift.”

Best Buy
Gaylord Ennis, Conwango Valley, N.Y · Vol. 2, No. 3 (1978), p. 9

Gaylord Ennis, Conwango Valley, N.Y: Gaylord Ennis, Conwango Valley, N.Y.: He's well pleased with his New Holland 718 field chopper, noting that ‘the machine is easy to service and stands up well to hard usage. The company has thought of just about everything. However, I can’t understand why the forage harvester companies have not devised a simple device for unhooking the wagon from the chopper right from the tractor seat. It should be standard equipment.”

Best Buy
Charles Springer, Bluffton, Ind · Vol. 2, No. 2 (1978), p. 9

Charles Springer, Bluffton, Ind: Charles Springer, Bluffton, Ind. He also notes that “they didn’t put the pins in the right place on my new New Holland bale mover Model 80 so I could use my quick hitch.” Owatonna model 260 win drower with 20.5 ft, header: “I simply can't praise this machine enough. covered 1,000 acres without even a minor breakdown or repair. The float on this big header is fantastic and the hydrostatic ‘power wheel’ drive is great. The whole machine is very ruggedly built. Also, it’s the fastest cutting machine I’ve ever operated.” W-150 Dodge 4 WD pickup with 360 engine: ‘The engine ran hot from (Continued on page 22)

Best Buy
Donald Burgess, Carthage, N.Y · Vol. 2, No. 1 (1978), p. 9

Donald Burgess, Carthage, N.Y: Donald Burgess, Carthage, N.Y.: He thinks New Holland could make a good machine even better by putting better tires and a better hitch on the Model 479 Haybine: ‘The machine worked alright but everytime I wanted to use it, would have a flat tire. They used such a cheap grade of tire. Also, the hitch was so weak it bent and folded." Donald's new Ford 7700 tractor with cab also earned a ‘best buy” nomination: “I used it filling silo last fall and was very pleased with its dual power transmission for chopping. was real pleased with quietness of the cab and visibility from the cab.” (Continued on page 30)

Best Buy
Joe Elpers, Evansville, Ind · Vol. 1, No. 6 (1977), p. 4

Joe Elpers, Evansville, Ind: Joe Elpers, Evansville, Ind., figures improper placement of — fertilizer disks on his new Deere Max-imerge planter cost him “at least 6,000 to 8,000 bu. of corn” this year. “The dealer placed the disks exactly in front of the planting disks. questioned him two times about this placement and he said it was the way farmers are doing it now. His placement of the disks made it impossible for the Max-Emerge unit to plant at a uniform depth. The dealer, and aman from Deere, do not feel it was any fault of theirs even though [ twice questioned the dealer and his foreman about placement of the disks before planting.” Several companies earned both “brickbats and bouquets" from. recent purchasers of their products: These companies included; New Holland: On the plus side,

Best Buy
Wesley Knoles, Mason City, Ill · Vol. 1, No. 6 (1977), p. 5

Wesley Knoles, Mason City, Ill: Wesley Knoles, Mason City, IIL: His “best buy” nomination is a 1977 Ford F150 XLT pickup with a topper: “I'm very pleased with the unit. It drives, rides and performs excellent.” Chevrolet % ton “10” Silverado pickup: “Drives and rides like a car. My daughter would rather drive it than our car which is a 1976 Oldsmobile, The cab is really air tight. Good, solid built. Very pleased,” reports a Minnesota FARM SHOW reader, Here are other “best” and ‘‘worst" buys nominated by — randomlyselected FARM SHOW readers from throughout the U.S.: New Holland TR 70 combine: “Great in corn and soybeans — no grain was cracked, grain losses in the field were down, less dockage at the elevator. Cab was nice and quiet, lots of room and controls easy to get to. Nice big grain tank. The 3208 Cat. motor performs real well. Good combine. Like it real well." Alan Wienke, Macon, Miss. He adds that his Graham-Hoeme chisel plow is ‘“‘sturdily built, and has sturdy shanks and springs heavy enough for Mibssissippi’s heavy soil,” John Deere 7700 combine: ‘This new combine is turbo charged with hydrostatic 4-wheel drive and can run a gear higher than my previous 7700 diesel. Unbelieveable the mud you can go through with the rear wheel drive. Back wheels will throw mud higher than the combine.”

Best Buy
Clayton Berg, Hendrum, Minn · Vol. 1, No. 5 (1977), p. 11

Clayton Berg, Hendrum, Minn: Clayton Berg, Hendrum, Minn.: ‘' got a new 8430 John Deere. It does everything planned for it to do. The Fargo Implement, Fargo, N. Dak., gives the best service for parts and repairs. have been very satisfied with them,” An Illinois reader reports that in the past 12 months he has purchased “a used IHC 966 diesel tractor, used New Holland 469 Haybine and a new LHC 480 disc: No problems. Everything and everyone performed as expected.” Another reader cites his Big Bud tractor, from Northern Mfg., Havre, Mont., as his “best” buy: "A quality made tractor with very good service.” A Wisconsin reader who didn't sign his name nominated a White 2105 tract’ * as his “best” buy. As in previous FARM SHOW buying surveys, sloppy workmanship at the factory was a frequently mentioned complaint. “The workmanship was lousy,” says Louis Herdegen, Birdtail Ranch, Chinook, Mont., of his 1855 White tractor which he purchased new. “It was only half put together and was nothing but one big pain.” Louis is well pleased with two Ban-A-F ly electronic f'y control units from the Schlueter Co.: “Have two in the farrowing house and they really are flashing and popping all the time. They surely seem to be doing their jobs of getting rid of flies."

Best Buy
Norman Trost, Ronan, Mont · Vol. 1, No. 5 (1977), p. 11

Norman Trost, Ronan, Mont: Norman Trost, Ronan, Mont: ‘He reports “excellent results” with his New Holland hydrostatic — selfpropelled model 1112 swather: “The twin sickles allow me to cut much faster than my previous single sickle machine. The cab is comfortable, dust free and quiet with the exception of the hydrostatic whine."’ Norman is disappointed with his Deere baler model 466: ‘Since I’ve had it, the main pitman and shaft have had to be replaced. The cluster gear popped a tooth, allowing it to go out of time which broke both needles and split one knotter in half. The needle lift frame has had to be taken off and straightened, and several sealed bearings have gone out already.”

Best Buy
Turner Ranch, Moore, Mont · Vol. 1, No. 5 (1977), p. 11

Turner Ranch, Moore, Mont: Turner Ranch, Moore, Mont.: New Scotch Brand ATP-200 baler twine from the 3-M Co. didn’t live up to his expectations: “This plastic twine just won't work in a New Holland SP 1282 baler,” Kenneth Turner reports. “It shreads as it’s pulled around the bale and then breaks.” On the plus side, Kenneth lists a Speed King 8 in, by 46 ft. pto-driven grain auger as a “best buy’: “This auger has worked real nice and can unload a big load of grain into a tall bin in a hurry. It is built strong and should last a long time.”

Best Buy
Merle Hatzinger, Fall River, Wis · Vol. 1, No. 3 (1977), p. 27

Merle Hatzinger, Fall River, Wis: Merle Hatzinger, Fall River, Wis., of his new International 1566. ‘‘No problems as of yet. Lots of power. Fuel use isn’t too high and maintenance is easy. Cab is a little noisy.” An lowa farmer is well pleased with his Massey Ferguson 1155 tractor equipped with an add-on M and W turbo charger: “It handles very good, the controls are handy, and it uses less fuel than the one we traded in. The cab isn't as quiet as I was expecting it to be, and it has a poor seat. think MF should replace the springs with hydraulic or air ride.” An Indiana farmer says his “best buy” is a White 2-150 tractor: ‘We like the extra power it has to pull six 18 in, plows. We especially like the quiet cab with radio and air conditioning. Handles nice too.” This same farmer wishes the frame on his model 1510 Oliver front end loader had been “beefed up” more “to stand the pressure on it from the hydraulic lift. It gets sprung out of shape.” New Holland's new TR 70 twinrotor combine has been a big hit with

Best Buy
Theo Russell, Corning, Iowa · Vol. 1, No. 3 (1977), p. 27

Theo Russell, Corning, Iowa: Theo Russell, Corning, lowa. New Holland 890 chopper with 3-row head: “It has electric controls for the spout, and a throw-out clutch which works perfect. The hitch is set so the chopper pulls straight all the time, even in muddy conditions. By taking three 30 in. rows, you can usea “‘Can’t afford to take our equipment out of the shed.” big tractor with no problem knocking down standing corn. We chop at 1/8 in. and get perfect chopping without using a screen," reports

Best Buy
John K. Weiss, Dow City, Iowa · Vol. 1, No. 3 (1977), p. 27

John K. Weiss, Dow City, Iowa: John K. Weiss, Dow City, lowa. Last year he had his local fertilizer company mix 2,4-D with 33-0-0 fer‘“‘We’re disappointed in GM for putting such junky articles on their top of the line pickup.” tilizer to apply on pasture, primarily to kill thistles: ‘After applying, the weather turned cool and I didn't get results from the 2,4-D. The product and service were okay but the weather didn't cooperate so this is why I feel I had no results,” explains John. “I know some others who have done this and had as high as a 90% kill. I will try the method again.”’ New Holland 770 forage chopper: ‘Works very well and has great capacity. I don't know what happened, but shortly after got it the tongue bent. The dealer gave me another, I'm also very well pleased with my Jamesway belt feeder in the barn.”

Best Buy
Arlan Schomaker, Greenville, Iowa · Vol. 1, No. 3 (1977), p. 27

Arlan Schomaker, Greenville, Iowa: Arlan Schomaker, Greenville, lowa. New Holland grinder mixer Model 354 with Art’s Way Model 400 electronic scale: “The grinder-mixer is very solid and well built. It runs smooth and quiet, and has more capacity than my old grinder mixer. The scale is convenient and easy to operate, and takes the guesswork out of grinding,’ reports

Best Buy
George Woody, Snow Camp, N.C · Vol. 1, No. 3 (1977), p. 27

George Woody, Snow Camp, N.C: George Woody, Snow Camp, N.C. New Holland 890 forage harvester: “It's much easier to pull (requires less power) than competitive models. Has a 12 knife cutterhead and chops material extra fine without a recutter screen, Built heavy-duty throughout and a real pleasure to operate,"’ reports

Best Buy
Roy Embry, Eatonton, Ga · Vol. 1, No. 3 (1977), p. 27

Roy Embry, Eatonton, Ga: Roy Embry, Eatonton, Ga. He also passes along this “‘message’’ to the manufacturer of his Bou-Matic vacuum pump: ‘These vaccum pumps run too fast if they are set up to produce 100 CEM vacuum, The bearings go out at least twice a year, and the vanes wear out too quick, causing them to pump less vaccum, causing related problems such as slow milking, etc." Guy Roots custom silo filling operation: ‘When it's possible to get this kind of service in the fall, when our herd is demanding more of our attention, we can't afford to take our equipment out of the shed, However, we do find it advantageous to use our John Deere blower powered by a 60 hp electric motor at the silo,” says an Ohio farmer, who pays $35 to $40 per hour for hiring silage custom chopped with a 2-row New Holland chopper and 3 wagons. Deere 1640 disc harrow: “Summer drought slowed down corn maturity and forced a late harvest in'76. Fierce winter kept us from doing much plowing. Result: 200 acres of unplowed red clay land this spring. Our soil can turn into a brick pile when spring plowed. The 1640 harrow penetrates dry clay too hard to plow and makes 25-30 acres of beautiful seedbed per working day. Look forward to using it behind small grain harvest to get corn in quick.’ Frank Walker, Orange, Virg. Bimco pickup hitch: “It'll pull my 6 x 16 stock trailer without twisting and raising up in front.’’

Best Buy
Kenneth Crandall, Sterling, Colo · Vol. 1, No. 1 (1977), p. 27

Kenneth Crandall, Sterling, Colo: Kenneth Crandall, equipment manager for E.E. Sonnenberg and Sons, Sterling, Colo. On the negative side, he faulted Fairbanks Morse solid state magnetos which come on Caterpillar G333 natural gas “They said it was one of the best balers they had seen.” irrigation engines.’ Crandall says the units ‘twill only run two to three weeks, We've replaced them with better, less expensive and less complicated magnetos.”’ 642 Ford combine — “‘It’s well designed and I'm very well satisfied,” says Wilburn Lundlum, Jr., Moran, Kan. Several respondents who nominated ‘best’ buys didn’t want their names used. Their nominations included: New Holland 850 big baler: ‘1 do custom work and everyone I baled for had me back to do more, and they said it was one of the best balers they had seen.” Century trailer type field sprayer: “We have a 400 gal. tank mounted on it with a built-in agitation system. It’s also equipped with a centrifugal pump for high volume spraying. The pump is mounted right on the sprayer with a power shaft to the tractor, which makes for fast, easy hookup.” John Deere 4430 diesel tractor: “Excellent tractor, The cab is very _ satisfactory. Easy to steer and great hydraulic system.” Nachurs plant food; “My experience has been super. The soil testing service that goes with it is the best I've seen,” I-l-Apz @

New Holland 489 haybine

8 Best Buys2 Worst Buys
Worst Buy
Lawrence Bannerman, Holly, Mich. · Vol. 34, No. 6 (2010), p. 15

Lawrence is disappointed with his 2008 Hesston 1120 haybine. “When the haybine was delivered it wasn’t completely put together and the dealer wouldn’t do anything about it. I used the machine to cut about five acres of hay and it shook so bad the knife broke. The dealer took it back and said he fixed it, but the next year it didn’t work any better. I took the haybine back to the dealer for repair and when I went to pick it up the dealer said the warranty had expired and I had to pay $500 to get the machine back. Since then I’ve cut only about 50 acres with it and have spent $1,000 on repairs.

“My 1979 New Holland 489 haybine was able to cut about 5,000 acres of hay before it broke down and I had to spend $900 on a new gearbox. But since I bought the Hesston model I’ve cut 600 acres of hay with the old New Holland model and only about 50 acres with the Hesston.” Goodyear Conquest TSI series tires on it. After only about 29,000 miles we’ve already had to replace three of the tires. The tires start separating in the center of the tread, and then the steel belting starts to protrude. We’ve gone to two local Goodyear dealers with no satisfaction. No more Goodyear products for us.”

Best Buy
Zenas Shildt, Mercersburg, Penn. · Vol. 20, No. 5 (1996), p. 16

“Our 1994 Martin 8-ft. silage bagger packs well and makes a smoother bag of haylage than any other bagger I’ve seen. It works great and costs only about two thirds as much as other popular baggers. “We like our 1995 Deere 930 12-ft. mower-conditioner. It mows and dries hay faster than the New Holland 489 mower-conditioner we previously owned. Works great.”

Best Buy
Ray Fiedler, St. Joseph, Minn. · Vol. 18, No. 3 (1994), p. 15

Ray Fiedler, St. Joseph, Minn.: Ray's impressed with his 1993 Ford 8630 2-WD tractor. “I really like the powershift transmission, foot throttle, and cab. It has doors on both sides. “My 1992 Case-IH 600 silage blower runs smooth and has a lot of capacity. use it with a 100 plus hp tractor.” On the negative side, Ray lists his Deere 1219 mower conditioner. “I bought it in the fall of 1992 when I traded in an 8-year-old New Holland 489 haybine and used it for the first time in 1993. didn’t like the way itcut - hay plugged up at the sickle guards.”

Best Buy
Randy Warren, Brechin, Ontario · Vol. 14, No. 5 (1990), p. 12

Randy Warren, Brechin, Ontario: A 1987 New Holland 489 9-ft. haybine is Randy’s “best buy”. “The header flotation is excellent and the intermeshing rubber rolls do a fine job of conditioning hay. The second year we owned the machine a roll driveshaft broke even though the machine was out of warranty, but the company replaced it. As the ad says, ‘If it isn’t a New Holland, it just isn’t a haybine.’””

Best Buy
Larry Shepler, Reynoldsville, Penn. · Vol. 14, No. 4 (1990), p. 13

Larry Shepler, Reynoldsville, Penn.: “It operates smoothly and runs good, but is very clumsily built compared to the 1816 model it replaced,” says Larry about his 1988 Case 1818 skid steer loader. “There's too much overhang on the back so I can’t maneuver it in small places. It also needs a fuel gauge.” Larry’s Hesston 1010 Hydra Swing mower-conditioner is another “worst buy”. “The pivot tongue is the only good feature as it makes it easy to move the rig back and forth from field to repair shop. In one 1 3/4acre field I once broke 11 knives and three guards. It knocked out the cutterbar heads on a regular basis and they cost $70 each to replace. The conditioning rolls were there only to move hay off the cutterbar - they “The pivot tongue is the only good feature. Makes it easy to move the rig back and forth from field to repair shop.” couldn’ tcrimp arotten potato, Finally, stress cracks and bad bearings made us trade it for a New Holland 489 haybine which has caused very little trouble.” On the positive side, “My 1986 White 2 110 tractor runs smooth and is easy on fuel. Gear shifting isa little on the sticky side, but the powershift is smooth and easy to operate. The cab is very quiet and has better visibility than any other tractor I've ever driven. We like the cab so much that we’re looking for one for our White 2-85 tractor.” Larry’s 1989 Deere 430 round baler is another “best buy.” “It’s so easy to operate that the first bale I made with it looked as good as the last of the season, The monitor works great, but it’s difficult to set bale size because there’s no bale size indicator.”

Best Buy
Gordon Fike, Mansfield, Ohio · Vol. 11, No. 5 (1987), p. 13

Gordon Fike, Mansfield, Ohio: He nominates his 1986 Dodge 150 pickup and 1986 Ingersoll 18-hp. lawn and garden tractor as “best buys”. “The pickup rides well, gets good mileage and is well built. The garden tractor also works well. I have the hydrotiller, snow thrower and blade attachments which all work great.” James Thompson, Thompson, Iowa: “For the past 5 yrs. I've used Bladex with my grass herbicide on corn and generally got good results, But the past 3 yrs. I’ve had to spot treat more and more broadleaf escapes with Banvel. This year was a failure due mostly to dry conditions. treated some spots twice and still had poor results, Next year I'll forget the Bladex and come back post emerge with Banvel, or Buctriland atrazine to control broadleaves.” He's happier with his New Holland 489 Haybine and Kinze 500 gal. spray cart. “I replaced a479 Haybine, which was a good machine, with the 489 and there’s no comparison. The 489 has less weight supported by the float springs. In 300 acres of mowing, I’ve only broken one guard and section, The paint job is better than on most cars and pickups I’ve owned, “The Kinze cart is very rugged and versaule. Luse it with a 3-pt. 40-ft. boom sprayer. The surprising thing is that with a disk or digger behind, it makes for a long rig butno maneuverability problems are created. The implement follows the cart like a shadow, Its 18.4 by 26 tires make it roll like it’s not even there. The only time that I notice the extra pull on my Deere 4630 is when the tank is full and going uphill.”

Worst Buy
Gary Stripe, Garden Grove, lowa · Vol. 9, No. 6 (1985), p. 13

Gary Stripe, Garden Grove, lowa: ‘“‘My New Holland 489 mower/ conditioner mows under almost any condition when it's working. However, it has been the worst lemon ever owned. In the first three years I replaced the main gearbox twice alt my own expense. Finally this year New Holland notified their dealers about the defective gearbox and they replaced mine. All the tin-work, doors and shields are falling apart and the tongue with enclosed driveshaft keeps cracking and breaking. Also, inside the tongue on the drive shaft universal joint is a grease zerk that cannot be reached without removing the tongue from the machine. I have the price of two conditioners invested into this one, and all I have to show for it is one worn-out machine.”

Best Buy
Bill Green, Wapakoneta, Ohio · Vol. 9, No. 5 (1985), p. 12

Bill Green, Wapakoneta, Ohio: ‘My worst buy ever is an A.O. Smith water heater in my milkhouse. It's a piece of junk,” says Bill. “My best farm implement ever is my New Holland 489 windrower. It's a masterpiece of perfection. “Also, my Silver King tractor built in 1946 in Plymouth, Ohio, has to be one of the best small tractors ever made. I've used it practically every day since I bought it new with very few problems."

Best Buy
Leonard Robinson, Whittemore, Mich. · Vol. 9, No. 2 (1985), p. 15

Leonard Robinson, Whittemore, Mich.: "You can travel at a good speed and it doesn't plug. It also makes good windrows," reports Leonard about his "best buy" New Holland 489 Haybine.

Best Buy
James Autry, Fayetteville, N.C. · Vol. 8, No. 3 (1984), p. 13

James Autry, Fayetteville, N.C.: "My new International 1420 Axial Flow combine has lots of capacity, plenty of power and is easy on fuel. | get excellent grain samples. Good dealer service." On the negative side, he's had trouble with his New Holland 489 mower/conditioner. "It's never done a clean job cutting. Poor factory fol- lowup."

New Holland TR 86 combine

8 Best Buys0 Worst Buys
Best Buy
David Richburg, Manning, S.C. · Vol. 29, No. 4 (2005), p. 12

“I bought a 1991 New Holland TR 86 combine used three years ago and it’s my best buy. This combine now has more than 3,000 hours on it and has many more to go. It’s easy to service and repair and also easy to operate. My dealer said it’s painted yellow to be seen and be proud of.

“My Sleep Number mattress lives up to its claims. I sleep good on it all night long, waking up able to get out of bed with little stiffness. It’s much more comfortable than our old mattress because it’s filled with air and can easily be adjusted. My wife agrees with me. We really like it.”

Best Buy
James E. Greuel, Trilla, Ill. · Vol. 21, No. 1 (1997), p. 15

A 1991 New Holland TR86 combine equipped with rear wheel assist rates as James’s “best buy”. “I use it in a variety of crops including wheat, corn, soybeans, and buckwheat. The 7.8-liter 6-cyl. engine has a lot of power. The combine has twin rotors and a grain pan under them which, along with a straight-out grain auger, results in excellent grain quality. That’s especially important to me because I grow soybeans for seed. It turns short and the hydraulics, controls, cab comfort, and visibility are excellent. Last year most of my buckwheat was wet and green at harvest and a lot of the soybeans were short, but I didn’t have any problems. I had to use the feederhouse reverser only once in about 130 hours of operation. It also did a nice job shelling corn with minimum loss. Corn quality was excellent. “I use a New Holland 973 20-ft. grain platform and a 6-row Deere corn head with the combine. The grain platform is one of the best on the market today. The lateral float feature works great. The machine is easy to service and repair and is also easy on fuel. I recommend using a chaff spreader with the combine.”

Best Buy
Bob King, Appleton, Wis. · Vol. 20, No. 1 (1996), p. 16

“It’s the best kept secret in the combine industry,” says Bob, pleased with his New Holland TR86 combine. “It runs smooth and quiet and is easy to service. It does a nice job threshing and puts undamaged grain in the tank. It’s almost impossible to lose any grain out the back. It’s well-built and has more capacity than a Deere 8820. It also has excellent resale value. “My Deere 8820 combine is my worst buy. It’s too noisy, very unreliable, delivers poor quality grain, and is too big and heavy for its capacity. It’s also underpowered, hard to repair, and has poor resale value.”

Best Buy
George Markle, Claresholm, Alberta · Vol. 17, No. 6 (1993), p. 14

George Markle, Claresholm, Alberta: George is pleased with the 1991 Redekop straw chopper and chaff spreader he mounted on his New Holland TR86 combine (Redekop Industries, Highway 16 West, Box 178A,RR 4, Saskatoon, Sask., Canada S7K 3J7).““Itspreads both straw and chaffevenly over a 36-ft. width and is easy to mount. It has performed flawlessly and followup service by the manufacturer has been great.” ominate t Buys transmission is difficult to shift without grinding gears. Otherwise, both tractors have been a pleasure to operate. They start easy and are fuel efficient. The way they’re built reminds me of U.S. technology used in the 1950's. They have a simple design and all components are located for easy access. also like the low price.”

Best Buy
Steve Fienup, Shenandoah, Iowa · Vol. 17, No. 4 (1993), p. 16

Steve Fienup, Shenandoah, Iowa: “It threshes well and has good capacity, but I wish the auger spout wouldn't blow in the wind and scatter grain,” says Steve about his 1990 New Holland TR-86 combine. Steve’s unhappy with his 1990 MasseyFerguson 3650 front wheel assist tractor. “The inner cooler went out and a rod bent. We had to install new pistons and sleeves. I thought the company should have paid for more of the repair cost. The clutch also went out. Total repair cost was about $8,000. 1 didn’t think I needed the extended warranty, but I sure wish I had it now.”

Best Buy
Rex Ballard, Waynetown, Ind. · Vol. 14, No. 3 (1990), p. 14

Rex Ballard, Waynetown, Ind.: Rex is disappointed with his 1989 Ford 3/4 Supercab pickup. “It's reliable, but uses oil and needs a 40-acre field to turn around. “My best buy 1989 New Holland TR86 combine produces clean grain and isa pleasure to operate.” Allan Ling, Hunter River, Prince Edward Island: Allan says his Massey “It's reliable, but uses oil and needs a 40-acre field to turn around.” Ferguson 828 round baler “makes a uniform bale, never plugs, and is easy to operHis 1979 Ford 3/4-ton 4-WD pickup has more than 200,000 miles, “I’ve used it on short drives and to pull heavy loads,”

Best Buy
Bill Knoff, Nashotah, Wis. · Vol. 14, No. 2 (1990), p. 13

Bill Knoff, Nashotah, Wis.: “My 1988 GMC Dually 454 automatic pickup offers “This cultivator is worth its weight in herbicides because of the savings in chemicals.” excellent visibility and comfort and has a superb stereo. No problems after 10,000 miles. “The grain loss monitor on my New Holland TR86 combine lets me push the combine to maximum speed without losing grain. I wouldn’t be without it.”

Best Buy
Gerald Thaden, Marvin, S. Dak. · Vol. 12, No. 1 (1988), p. 14

Gerald Thaden, Marvin, S. Dak.: “I've used my New Holland TR86 combine for one season. It’s a truly modern combine that performs well in all crops. | especially liked its performance when equipped with a new 973 20-ft., flexhead. It’s definitely a best buy,” says Gerald. He’s also pleased with his 1987 Cheyrolet Scottsdale 1-ton 4-WD pickup. “It handles well under loaded conditions and yet is as comfortable riding as the lighter duty models. The 350 fuel injected gasoline engine along with the 4-speed transmission and 3.75 gear ratio makes it a real workhorse on or off the road.”

New Holland 116 haybine heads

7 Best Buys0 Worst Buys
Best Buy
Ted Watson, Eriksdale, Manitoba · Vol. 24, No. 2 (2000), p. 15

Ted’s the satisfied owner of a 1993 New Holland 116 14-ft. Haybine. “It’s an all-around terrific haying machine. I’ve had to replace only two drive chains. I use it to cut all my wild hay as well as my alfalfa.”

Best Buy
Jim Zoucha, Orchard, Neb · Vol. 19, No. 6 (1995), p. 16

Jim Zoucha, Orchard, Neb: A Safe T Katch calf catcher rates as Jim's “best buy” (Box 176, Orchard, Neb. 68764 ph 800 8465157). “We had a big problem with calf scours a couple years ago and the calf catcher made it easy to start treating calves. The calves we saved paid for it many times over, It's especially handy for tagging new calves without getting the calf’s mother too mad.” On the minus side, “My Owatonna 285 self-propelled windrower is my worst buy. A bunch of chimpanzees could have designed and built a better machine, and the company provided absolutely no help. The problems included out-of-square construction and high prices for parts. finally rebuilt and cross-referenced most of the purts “A bunch of chimpanzees could have designed and built a better machine.” that I needed to solve many of the problems. Hinally parked it and bought a very good windrower - a New Holland 116. “My air compressor and pressure washer hoses never scem to get picked up after use, so bought a hose reel made by Reel Quick, of Orchard, Neb, It makes it easy to store hoses so that they don’t get kinks in them or gel run over.”

Best Buy
Jim Zoucha, Orchard, Neb. · Vol. 19, No. 6 (1995), p. 16

Jim Zoucha, Orchard, Neb.: A Safe T Katch calf catcher rates as Jim's “best buy” (Box 176, Orchard, Neb. 68764 ph 800 8465157). “We had a big problem with calf scours a couple years ago and the calf catcher made it easy to start treating calves. The calves we saved paid for it many times over, It's especially handy for tagging new calves without getting the calf’s mother too mad.” On the minus side, “My Owatonna 285 self-propelled windrower is my worst buy. A bunch of chimpanzees could have designed and built a better machine, and the company provided absolutely no help. The problems included out-of-square construction and high prices for parts. finally rebuilt and cross-referenced most of the purts “A bunch of chimpanzees could have designed and built a better machine.” that I needed to solve many of the problems. Hinally parked it and bought a very good windrower - a New Holland 116. “My air compressor and pressure washer hoses never scem to get picked up after use, so bought a hose reel made by Reel Quick, of Orchard, Neb, It makes it easy to store hoses so that they don’t get kinks in them or gel run over.”

Best Buy
Ordell Gustad, Volin, S.Dak. · Vol. 18, No. 2 (1994), p. 16

Ordell Gustad, Volin, S.Dak.: “I bought a New Holland 116 swinger windrower last summer and it’s my best buy. The cutterhead suspension lets it float over rocks and other foreign objects better than any other windrower I’ve ever owned.”

Best Buy
Scott Wright, Vanscoy, Sask. · Vol. 15, No. 5 (1991), p. 13

Scott Wright, Vanscoy, Sask.: A 1990 New Holland 116 haybine heads Scott's “best buy” list. “It has cut over 1,000 acres with no down time. It cuts clean and fast at speeds up to 6 mph. Maintenance is very simple.”

Best Buy
Mike Lefever, Longmont, Colo. · Vol. 15, No. 1 (1991), p. 12

Mike Lefever, Longmont, Colo.: Mike is disappointed with his Case-IH 365 field cultivator. “I can’t work more than an hour at a time without losing a bearing on the roller baskets, and bolts constantly fall out. I’ve used it on about 150 acres and have broken 35 S-tines. I spend more time repairing it than using it. A thousand times over, I wish I'd never spent $8,500 to buy it. At the very least, I wish I would've financed it so I could let the company repossess it. However, I doubt they’d ever want it back.” On the positive side, “My New Holland 116 swather is a best buy. It cuts hay clean at6 mph and makes a neat fluffy windrow.”

Best Buy
George Yates, Somerset, Wis. · Vol. 12, No. 5 (1988), p. 13

George Yates, Somerset, Wis.: George likes his 1987 New Holland 116 mower conditioner equipped with two 8-fL sickles, “We've used it to cut over 2,000 acres. It does a good job of cutting and makes a good windrow in short hay. However, it docs have a problem with overlap sections that wear out and come loose.” A 1978 Allis-Chalmers 7080 tractor, bought used, rates as a “worst buy.” “It has a good engine, but shifting is done with cables which tend to bind. We finally bought afloor shift for itand that helped, The clutch was a problem, and we had trouble with transmission gears. When we did use it in the field, the cab was uncomfortable. This tractor is for sale.” He’s also unhappy with his 1988 Volkswagen Fox station wagon. “AsI drove it home from the dealer, the lights on the right hand side quit working. A dealer 50 miles away fixed it, but I had to have someone drive me home. Then the passenger door handle pulled off. Also, struts on the rear tail door wouldn't hold the door open and the latch wouldn't always latch. A dealerfixed everything under warranty. Now the car runs and handles well.”

New Holland 316 square baler

6 Best Buys1 Worst Buy
Best Buy
Ted Sockaci, Fombell, Penn. · Vol. 34, No. 1 (2010), p. 14

“My White 2-85 tractor works great with no problems. It’s a rugged, reliable machine.

“My three Stihl chainsaws are all best buys.

“My New Holland 316 square baler and 648 ‘Silage Special’ round baler are both best buys.

“I bought a used White 2-70 tractor at an auction with less than 500 hours, and it turned out to be my worst buy. The engine was junk - I broke two crankshafts within 1,000 hours of use. We’ve used Oliver tractors since 1948 with no problems with any of them. The White 2-70 is supposed to be identical to the Oliver 1455, but it’s not. I guess that’s why there are so many used 2-70’s for sale at dealers.”

Best Buy
Rob McDonald, North Lancaster, Ontario · Vol. 21, No. 2 (1997), p. 16

“Our 1986 New Holland 316 baler is our best buy. We haven’t spent any money on it at all except for grease and plastic twine. We put it in the shed every night so it still looks like new. Last year we had our dealer install a bale thrower on it. We always knew it had a lot of capacity, but it has even more now.”

Worst Buy
David Nobbe, Barrington, Ill · Vol. 19, No. 1 (1995), p. 15

David Nobbe, Barrington, Ill: “My worst buy is the Case-IH 8530 baler bought new last year. was replacing my 10-year-old New Holland 316 with the Case. In the 10 years I owned the New Holland I didn’t go through one bag of shear pins. I've used three bags of shear pins since I bought the Case. I spend as much time unplugging the baler and replacing shear pins as I do baling.”

Best Buy
Richmond, Minn. · Vol. 11, No. 3 (1987), p. 13

Richmond, Minn.: "We baled 14,000 bales with our 1986 New Holland 316 baler equipped with electric controls. We're very satisfied with the capacity and the super sweep pickup. Would like to see larger tires on it for wet fields.

Best Buy
Alan and David Libbesmeier, Richmond, Minn. · Vol. 11, No. 3 (1987), p. 13

Alan and David Libbesmeier, Richmond, Minn.: "We baled 14,000 bales with our 1986 New Holland 316 baler equipped with electric controls. We're very satisfied with the capacity and the super sweep pickup. Would like to see larger tires on it for wet fields.

Best Buy
Raleigh Yukel, Silver Lake, Minn. · Vol. 8, No. 6 (1984), p. 12

Raleigh Yukel, Silver Lake, Minn.: He nominates his 1980 Allis Chalmers I’-2 corn special Gleaner combine as “best buy”. “I traded for the combine last fall at my local Allis Chalmers dealer. There were a number of small things out of adjustment and some parts needed to be replaced but the dealer took care of them and it works great. Very satisfied.” Linate er ee 4-WD pickup. “During the first few months after delivery the pickup was in the shop more than on the road. Some of the problems: a bad throwout bearing; the transmission locked in gear; the engine had a bad camshaft gear and timing chain; the rear engine seal failed, so all the engine oil leaked out; the fuel tanks would not transfer; and the turn signals failed repeatedly, The problems were compounded by very poor dealer and factory assistance. It took two dealers and many trips to find that the transmission was missing parts in the gear stack. In addition to everything else, the truck has a very poor paint job and the plastic “chrome” is falling off all over the truck. For the price I paid, it's very discouraging.” Gary's happy with his New Holland 316 square baler. ‘‘The 316 was designed ard assembled with durability and quality in mind. The baler has good capacity and produces a heavy, well-shaped bale with very few miss-ties. Our dealer provides excellent service." He's also pleased with his Motorola 2-way I'M radios. “They provide good coverage and are very clear. The private line feature eliminates all other conversations.”

Best Buy
Gary Davis, Oak Grove, Mo. · Vol. 8, No. 6 (1984), p. 12

Gary Davis, Oak Grove, Mo.: Heading Gary's “‘worst buy” list is a 1983 Chevrolet Silverado 6.2 diesel 4-WD pickup. “During the first few months after delivery the pickup was in the shop more than on the road. Some of the problems: a bad throwout bearing; the transmission locked in gear; the engine had a bad camshaft gear and timing chain; the rear engine seal failed, so all the engine oil leaked out; the fuel tanks would not transfer; and the turn signals failed repeatedly, The problems were compounded by very poor dealer and factory assistance. It took two dealers and many trips to find that the transmission was missing parts in the gear stack. In addition to everything else, the truck has a very poor paint job and the plastic “chrome” is falling off all over the truck. For the price I paid, it's very discouraging.” Gary's happy with his New Holland 316 square baler. ‘‘The 316 was designed ard assembled with durability and quality in mind. The baler has good capacity and produces a heavy, well-shaped bale with very few miss-ties. Our dealer provides excellent service." He's also pleased with his Motorola 2-way I'M radios. “They provide good coverage and are very clear. The private line feature eliminates all other conversations.”

New Holland 451 mower equipped

6 Best Buys1 Worst Buy
Best Buy
Elmer Heupel, New Leipzig, N. Dak · Vol. 19, No. 2 (1995), p. 16

Elmer Heupel, New Leipzig, N. Dak.: Elmer’s best buy is a 1994 New Holland 451 sickle bar mower. “It cuts cleaner and runs smoother than any mower I've ever used.”

Best Buy
Mark Klein, Sedalia, Mo. · Vol. 18, No. 1 (1994), p. 16

Mark Klein, Sedalia, Mo.: Mark’s the satisfied owner of a Sperry New Holland 451 sickle mower equipped with a 7-ft. cutterbar. “I bought the mower used and replaced a few worn parts including the guards. All the rain we had last summer made our pastures lush, but this mower went right through the heavy grass with no problems. Many other farmers in this area had trouble with their mowers clogging up.”

Best Buy
Bill Short, Hamilton, Mo. · Vol. 15, No. 1 (1991), p. 12

Bill Short, Hamilton, Mo.: “My best buy is a Ford New Holland 451 mower equipped with a 9-ft. sicklebar and ledger plate because there are fewer mower guards and they don’t plug up as easily as conven tional guards. However, it needs a better swath divide board in heavy, tall hay.”

Best Buy
Mike Routson, Weiser, Idaho · Vol. 13, No. 5 (1989), p. 13

Mike Routson, Weiser, Idaho: Mike nominates his 1988 New Holland 451 mower ranks as his “best buy”. “It allows me to mow faster and cheaper than with a swather because I can use a smaller tractor, Hay dries faster because it’s uncrimped and not in rows. Breakdowns are fewer and repair costs are lower than with a swather, It's also easy to operate.”

Worst Buy
Dick Williamson, Orchard, Neb. · Vol. 13, No. 4 (1989), p. 14

Dick Williamson, Orchard, Neb.: "My 1987 Koyker grain auger drives from either side and has a smooth way of moving grain which we don’t see in other augers. like the easy-on, easy-off pulling hitch.” On the “worst buy” side, Dick is disappointed with his 1985 New Holland 451 3pt. 9-ft. mower. “The knife drive plates wouldn't stand up to heavy grass mowing. They were expensive to repair and caused a lot of downtime. I replaced them three times before I got rid of the mower, Beware of independent mower companies using this same drive system.”

Best Buy
Joel Vincent, Depauw, Ind. · Vol. 13, No. 2 (1989), p. 12

Joel Vincent, Depauw, Ind.: “It does a better job of cutting grass and clover hay than any other mower I’ve owned,” says Joel about his New Holland 451 belt-drive mower.

Best Buy
Ivan Runyan, Coin, lowa · Vol. 10, No. 4 (1986), p. 13

Ivan Runyan, Coin, Iowa: ‘‘My Ford 5000 all-purpose tractor is an asset to my farming operation. It has always started easily for a diesel and is economical on fuel. Has a comfortable seat, steers easily and is a pleasure to drive. Even though it has 6,900 hrs. on it, it's still going strong.” Ivan's also happy with his 1984 New Holland 451 mower with 9-ft. cutter bar, “This mower is easy to mount or take off the tractor. It performs well even in the thickest grass or hay. It’s quiet running and easy to keep in perfect running condition. Has given very little trouble and parts are usually available at our local dealer.”

New Holland 499 haybine

6 Best Buys1 Worst Buy
Best Buy
Lloyd Walz, Vassar, Mich. · Vol. 16, No. 1 (1992), p. 14

Lloyd Walz, Vassar, Mich.: Lloyd's pleased with his 1990 New Holland 499 haybine. “The swing hitch lets me cut back and forth across the field instead of having to go around it.”

Best Buy
Andrew Spencer, Arkport, N.Y. · Vol. 14, No. 5 (1990), p. 13

Andrew Spencer, Arkport, N.Y.: “My ‘best buy’ 1990 Case-IH 900 6-row corn planter works great. I used it to plant nearly 900 acres last spring with only a few minor problems.” Andrew says his 1989 Deere 9500 combine “has tremendous capacity. I felt it was somewhat underpowered, bul the company has solved the problem.” Ronald Bersie, Waverly, Minn,; “Itcuts down and tangled hay with ease and makes anice windrow,” says Ronald, pleased with his 1990 New Holland 499 hydro swing haybine.

Worst Buy
Dennis Knoll, Bridgeport, Mich. · Vol. 14, No. 2 (1990), p. 13

Dennis Knoll, Bridgeport, Mich.: A 1988 Deutz-Allis minimum till disk-chisel plow rates as his “best buy”. “It's built for hard use and has excellent trash clearance in heavy corn stalks with minimal plugging.” Dennis’s “worst buy” is his 1989 New Holland 499 haybine. “We didn’t have any trouble with operation of the machine but we're disappointed with the paint finish because surface rust appeared after only a few weeks of use. The New Holland machines we previously owned had much better paint jobs.”

Best Buy
Rod Spindler, Durand, Wis. · Vol. 13, No. 4 (1989), p. 12

Rod Spindler, Durand, Wis.: “My 1986 New Holland 499 Hydro-Swing mowerconditioner is a best buy. Itruns quiet and is the most maintenance-free Haybine I’ve ever owned.”

Best Buy
Allan J. Ruffalo, Newark, N.Y. · Vol. 11, No. 4 (1987), p. 14

Allan J. Ruffalo, Newark, N.Y.: “1 used my New Holland 499 pivot-tongue haybine to cut 120 acres of first crop hay. I can’t be more pleased with its ability to pick up down alfalfa and cut through thick grass without plugging the knifebar. The conditioning rolls do an excellent job cracking stems for quick drying.”

Best Buy
Larry Shiflett, Fort Defiance, Virg. · Vol. 10, No. 6 (1986), p. 14

Larry Shiflett, Fort Defiance, Virg.: He had trouble with his ‘‘worst buy” 1981 Artsway 500 Mix Mill. “It's basically a good piece of equipment but the hydraulic turn for the discharge auger was too light and had to be upgraded, along with some of the other sprockets. The hydraulic drive to unload the tank was a joke and had to be converted to mechanical drive. But the worst thing is that it takes two weeks to get parts for it because Artsway is so slow shipping them. I've tried two dealers with the same results.” Larry likes his 1984 New Holland 499 Haybine. ‘It does a good job of cutting with little need for repair. Hydraulic drive eliminates drive shaft maintenance and we gel excellent parts service from the dealer, even though he’s an hour and a half away.”

Best Buy
Clarence Vanden Ham, Brandon, Man. · Vol. 9, No. 3 (1985), p. 13

Clarence Vanden Ham, Brandon, Man.: "We used our New Holland 499 12-ft. mower-conditioner to cut close to 1,000 acres of alfalfa last year. After using three different New Hol- land 495's in the past 10 years, we feel this model is a real blend of the 495's cutting capacity and the maneu- verability of the swingers. Really ap- preciate the lightweight cutterbar and the smoothness of hydraulic drive. "Our New Holland 359 Mix Mill is also a nomination for best buy. The 1,500-bu. capacity and 1,000-rpm drive give it a definite advantage over the 358 we had before. We can still power the 359 with our 986 Interna- tional tractor, feeding the mill as fast as the bale feeder can go."

New Holland 855 round baler

4 Best Buys3 Worst Buys
Best Buy
Wendell Suelter, Lincoln, Kan. · Vol. 18, No. 3 (1994), p. 15

Wendell Suelter, Lincoln, Kan.: “My 1979 Allis Chalmers 7045 tractor has performed well above expectations. Excellent lugging ability and handles well. “Lcan’tsay enough good things aboutmy 1991 Dew Eze flatbed. We use it to haul round bales and doa lotof other jobs. It's the most valuable tool on our farm, “My 1991 New Holland 855 round baler is the most underated baler on the market. A 10-year-old child could operate it.” On the minus side, Wendell lists his 1989 Hesston 5585 round baler. “It spent as much time in the shop as it did in the field. The pickup attachment was a disaster, The bearing lock collars weren’tsettightenough at the factory and belts were poor quality. It wasn’t a dependable machine. “My 1989 Ford F-250 4-WD pickup equipped with a diesel engine has been a nightmare. Almost every part on it, except “Tt's one of the most underated balers on the market. A 10-year-old could operate it.” for the engine, failed before it even had 100,000 miles. I bought it used with no warranty coverage. I'll never buy another used pickup again, partly because I don’t want to go without a factory warranty.”

Worst Buy
Orvis Byklum, Grygla, Minn. · Vol. 17, No. 6 (1993), p. 16

Orvis Byklum, Grygla, Minn.: “My 1974 Case 1175 tractor has over 3,000 EE aT aE “The dealer did a good job repairing it. But what will happen next?” ae. an hours. I had to replace one throwoutbearing at 300 hours, Since then it has requiredonly routine maintenance, “My worst buy is my New Holland 855 round baler. The maindrivebeltbrokedown Editor’s Note: We received a lot of response to last issue’s “worst buy” report from Emily Coffey, Arvada, Colo., about her 1990 Ford-New Holland 276 bi-directional tractor that burned up. Jimmy Byers, Brinkley, Ark., sent us the photo above that shows a blown-out battery (on right in photo) in his 1992 Ford New Holland 946 340 hp. 4-WD, Byers thinks the battery hold-down brackets caused the blow-out. “If Emily had the same hold-down system on her tractor, and the batteries blew out, that could have caused her fire. The problem is that the brackets are positioned too close to the battery posts. They corroded and then shorted out. The end blew out of one battery. We had battery acid all over. Our dealer didn’t wantto repair the damage but after I threatened to sue, he did.” Ed Swanson at the Minnesota Department of Transportation, St. Paul, Minn., says one of the department's 1992 Ford New Holland 276’s burned up this fall. “Tt went up so fast, the operator barely had time to get off. We’re concerned because we own a number of these tractors. We don’t want anyone to get hurt and we don’t want to lose equipment.” Swanson says he thinks the fire started in the articulation area and may have been caused by an electrical problem, but no investigation has yet been carried out. Galen Travis, Burlington, Colo., who once had a fire beneath the cab on his 1985 Versatile 276, is convinced the fire problem is caused by friction between a drive shaft and crop residue that packs tightly into the area between the bottom of the cab and the frame of the tractor. “Trash packs in there so tight it’s difficult to get it out,” says Travis, who came up witha modification kit that raises the cab up a few inches (see story on page 29 in this issue).

Worst Buy
Deborah McCollum, Lockport, N.Y. · Vol. 17, No. 4 (1993), p. 15

Deborah McCollum, Lockport, N.Y.: “Our New Holland 855 round baler has a lot of capacity which, combined with autowrap, makes baling hay quick and casy even in a bad year. “Our worst buy is our 1992 Chevrolet S10 pickup equipped with a 2.5-liter 4-cyl. engine. Ithas had hesitation problems from the startand, when itrains, water comes into the cab through the vents.”

Worst Buy
Otis Lee Berry, Cunningham, Ky. · Vol. 16, No. 1 (1992), p. 13

Otis Lee Berry, Cunningham, Kent.: “My 1990 New Holland 855 baler is a worst buy. I bought it in May of 1990 and the first time I used it the pickup teeth bent inside the guards. My dealer didn’t have enough new teeth on hand so I had to drive 200 miles to find some. Later I lost 75 acres of rented hay because the baler was at the shop for three months even though I called the company service manager three times. They finally brought it back last January.”

Best Buy
John Penner, Morden, Manitoba · Vol. 13, No. 3 (1989), p. 14

John Penner, Morden, Manitoba: John has had trouble with his 1986 New Holland 855 round baler. “Its pickup is poorly constructed and the shear pin set up is a pain. It would be a lot better if you could replace shear pins on the pickup’s belt drive rather than have to repair the chain drive. Also, the drum is too large for smooth feeding and the pickup teeth are poor quality.”

Best Buy
Jimmy Neuby, Ardmore, Tenn. · Vol. 12, No. 4 (1988), p. 13

Jimmy Neuby, Ardmore, Tenn.: “Our New Holland 855 baler will not have the life expectancy of our old New Holland 850 baler. The auto-tie and twine cutter is not too good and they’ve cheapened up the baler by lightening up the pickup and eliminating the slip clutch, The gauge wheels on the pickup are not well-supported and, in general, everything is built lighter and cheaper.” On the “best buy” side, “Our Deere 4840 tractor has performed perfectly with little down time and expense. At 5,000 hrs., I’m very pleased.”

Best Buy
Keith Davidson, Chickasha, OkL. · Vol. 10, No. 3 (1986), p. 12

Keith Davidson, Chickasha, OkL.: “My 1985 Ford 7710 with front wheel assist had several problems that the dealer took care of but a new tractor shouldn't have this many things go wrong. The engine had oversize valves in standard guides, the load monitor had to be replaced and both rear wheel seals and one front seal leaked.” As “best buy” Keith nominates his New Holland 855 round baler. “There's never any problem starting a bale. Makes a good, solid bale.”

New Holland 1411 discbine

6 Best Buys0 Worst Buys
Best Buy
Larry Shepler, Reynoldsville, Penn. · Vol. 38, No. 2 (2014), p. 14

“We traded our New Holland 1411 discbine for a 2013 New Holland 7230. The 1411 was a great machine with few problems, but it had covered a lot of acres. The 7230 just completed a full season with no problems except for a torn clip on the curtains.

“My Vicon 423T rotary hay rake does an excellent job of raking dry hay, but it won’t pick up green hay that has been run over. And if I adjust the rake to get it down to that hay, it picks up too many rocks. Another problem is the tine bars only have one bolt holding them on, and they cracked. The company made us buy an upgrade kit to solve the problem. The machine’s height adjustment keeps locking up, and the hitch pins break too easily. This discbine wasn’t built in the Vicon tradition.”

Best Buy
James Brooks, Siler City, N.C. · Vol. 28, No. 1 (2004), p. 15

“I like my 2000 New Holland 1411 discbine. This machine will mow anything. I’ve cut a lot of acres with no problems.”

Best Buy
Michael Trego, Glenmoore, Penn. · Vol. 27, No. 2 (2003), p. 13

“It does a great job of cutting heavy, damp, wet hay. We can even use it when it’s raining,” says Michael, pleased with his 1995 New Holland 1411 discbine.

Best Buy
James B. Brooks, Siler City, N.C. · Vol. 24, No. 2 (2000), p. 17

“My New Holland 1411 discbine is the best mower I’ve ever used. It’ll mow anything – the thicker the crop, the better it mows. The ground speed doesn’t have any affect on its mowing ability. It cuts clean at high speeds.”

Best Buy
Joe Burkart, Rocheport, Mo. · Vol. 22, No. 6 (1998), p. 14

“It cuts cleanly and quickly and doesn’t plug in heavy hay,” says Joe about his New Holland 1411 discbine. “It’s also easy to maintain.”

Best Buy
Harry Nolt, Orchard, Iowa · Vol. 22, No. 2 (1998), p. 16

“My 1996 New Holland 1411 discbine and 1996 New Holland 644 “Silage Special” round baler are both best buys. The discbine will cut through any kind of hay. I really like the endless belts on the baler. Heavy, wet silage bales can test the lacers on other balers. I also like the Autowrap tieing system - it makes bales that are all the same size.”

New Holland 315 hayliner baler

5 Best Buys1 Worst Buy
Worst Buy
Melvin Doyle, Plummer, Idaho · Vol. 40, No. 5 (2016), p. 15

“The most dangerous tractor I ever owned ended up being the most reliable. It was a 2007 Kubota L5030 50 hp, 4-WD model. The tractor’s rear wheels were spaced so closely together that the tractor almost rolled over 3 different times. Then I decided to mount duals on the rear, and now it’s my best tractor. It has about 6,000 hrs. on it with no problems.

“My worst buy recently was a used New Holland 315 hayliner baler. It made banana bales no matter what the factory-trained mechanics at the dealer tried. After spending $2,500, it’s on the way to the scrap heap.”

Best Buy
Lyle Schwarzrock, Poplar, Mont. · Vol. 36, No. 2 (2012), p. 13

“Our best buy 1978 New Holland 315 small square baler works great while requiring only routine maintenance. After buying the first one I now have three of these balers and use them every summer in my haying business. They’re the best.”

Best Buy
Tom Williams, Maryland, N.Y. · Vol. 32, No. 3 (2008), p. 15

“Our 1983 Case David Brown 995 tractor is our best buy. We used it to power a sawmill in winter and to do general farm work in summer. It has several thousand hours on it but still works great. It still has the original muffler.

“Our New Holland 315 baler was a problem at first. It had trouble tieing about every tenth bale. After we complained the company sent out a couple of men from the factory. They discovered it was ripping the strings off when it hit the kicker. They took a couple of wedges out of the bale chamber, which solved the problem.”

Best Buy
N. Fanno, Eagle Creek, Ore. · Vol. 25, No. 5 (2001), p. 17

“We own a New Holland 315 baler which has done a poor job of tieing bales. Every part in the knotter has been replaced twice. We solved the problem by installing an insert in the bale chute. Now it really works well.”

Best Buy
Glen Weber, Heron, Mont. · Vol. 17, No. 5 (1993), p. 16

Glen Weber, Heron, Mont.: “Our 1981 New Holland 315 small square baler works great. We've used it to bale 220 to 250 tons of hay per year with few breakdowns.”

Best Buy
David and Patti Tvedt, Byron, Minn. · Vol. 9, No. 4 (1985), p. 13

David and Patti Tvedt, Byron, Minn.: "Our best buy has to be a tie between our New Holland 315 square baler and our New Holland 489 haybine. Both the baler and haybine really maximize leaf retention on our alfalfa, We're putting up the best hay ever and our cows are really proving it with increased production, Our first New Holland baler lasted 27 years."

New Holland 411 discbine

5 Best Buys1 Worst Buy
Best Buy
Ted Shields, Bloomfield, Ky. · Vol. 24, No. 4 (2000), p. 16

Ted’s the satisfied owner of a 1990 New Holland 411 discbine. “We’ve used it to mow about 5,000 acres without any major problems. A disc bearing went out about three years ago which the dealer fixed within 24 hours. The only problem is that it pulls pretty hard, but this just lets me know that it’s built heavier and is more rugged than some of the competitors’ ‘lighter’ machines. It can mow incredibly thick hay even better than it can mow light crops. Overall, it’s an excellent machine.

“My Homelite Old Blue chain saw was always hard to start, and after three years the motor locked up. It would’ve cost more to fix than the saw was worth. Now I use it as a door stop.”

Best Buy
John W. Bacon, Kingston, Tenn. · Vol. 15, No. 5 (1991), p. 14

John W. Bacon, Kingston, Tenn.: “I’ve mowed hay for 50 years and this machine is the best I've ever used,” says John, pleased with his 1990 New Holland 411 discbine. “T’ve used it to mow about 150 acres and it hasn’t choked yet.”

Best Buy
Frank Richardson, Wauchula, Fla. · Vol. 14, No. 2 (1990), p. 12

Frank Richardson, Wauchula, Fla.: Frank’s “best buy” is his 1988 New Holland 411 discbine mower-conditioner. “It cuts anything, including Over-mature star grass that has 10-ft. runners, It’s also built tough. I hita stump in a field that stood the machine on its nose, but except for some broken blades no damage was done.”

Best Buy
George Holmes, Trumansburg, N.Y. · Vol. 14, No. 1 (1990), p. 14

George Holmes, Trumansburg, N.Y.: “T'll never go back toa sickle mower again,” says George, happy owner of a 1988 New Holland 411 dischine. “I've used it to cut over 400 acres of all kinds of hay at7 mph, AIT’ ve spentis $20 for knife replacement.”

Best Buy
Lynwood Crary, Norwich, Conn. · Vol. 13, No. 5 (1989), p. 13

Lynwood Crary, Norwich, Conn,; “I’m extremely pleased with my 1987 FordNew Holland 4610 and 1985 7710 tractors. “[ also like my Ford-New Holland 411 discbine, It has a wider cutting swath and faster ground speed than the New Holland 478 haybine which I previously owned and culs my mowing time almost in half, It certainly proved itself in this year’s wetand tangled crop.”

Worst Buy
Kenneth Gunderson, Galesville, Wis. · Vol. 13, No. 2 (1989), p. 14

Kenneth Gunderson, Galesville, Wis.: “Anyone with a fence will find this product useful,” says Kenneth, owner of a Reel-Tite manufactured by Kermco Products (RR 1, Box 204, Monroe, Iowa 50170). “I use Reel-Tite on my cow-calf operation to tighten barbed wire fences at least once a year, It’s simple and easy to use.” * Kenneth also likes his New Holland 411 disc mower. “I think that within 10 years discs will become standard equipment on all mowers. I know I'll never buy another sickle-type mower, “ Kenneth says his “worst buy” is a 9-ft. Bush Hog 3108 rotary cutter. “I'm almost afraid to use it because it’s already had three major breakdowns. Parts are hard to come by because the gear boxes and associated components are built in Italy. The parts trickle in, notin days or weeks but in months.

New Holland self-propelled baler

5 Best Buys1 Worst Buy
Feature storyBest Buy
A FARM SHOW reader · Vol. 41, No. 2 (2017), p. 13 · Full story at FARM SHOW →

“It has made more than a half million bales of hay over the years.”

Read the whole story →
Worst Buy
Don Miller, Raleigh, N. Dak. · Vol. 38, No. 1 (2014), p. 12

“We have baled with New Holland balers for many years. In 2012, we bought a new BR7090 New Holland and it’s the worst machine I’ve had on my place in 40 years of ranching. We can never get it to tie twine correctly and we always have trouble with the pickup attachment. In addition, the belts do not track properly. We have been unable to get satisfaction from our dealer or New Holland. What do they tell me? ‘We understand.’ But that’s as far as it goes.”

Best Buy
Virgil Storm, Lucas, Iowa · Vol. 34, No. 5 (2010), p. 13

“I’ve used New Holland round balers for the past 2 1/2 years. They’re the best money can buy.”

Best Buy
Francis Henderson, Brinston, Ontario · Vol. 30, No. 3 (2006), p. 15

“My 2004 New Holland TG210 tractor is a pleasure to operate. No problems.

“My 2005 New Holland big square baler works like a dream and has been trouble-free.

“My 2004 J-Star Van Dale 53-bu. feed cart is my worst buy. It has a bad paint job, a very loud muffler, and the 9 hp Honda engine has caused nothing but trouble. Gas keeps getting into the oil, but the dealer told me I had to go to the company for help. I’ve had to change the needle and carburetor, all at my own expense. The company gave me every excuse in the book why the problem was my fault. They also said that I have to turn the gas off whenever the machine is not in use. I have six other Honda engines, and I don’t have to shut the fuel off on any of them.”

Best Buy
Daniel Glick, Willow Street, Penn. · Vol. 15, No. 5 (1991), p. 14

Daniel Glick, Willow Street, Penn.: Daniel bought his “best buy” New Holland model 311 baler in 1988. “After having the service man out two or three times to adjust the knotters, we had a good baler. The following spring we baled 4,400 bales before it missed a knot!”

Best Buy
Jack Rarig, Catawissa, Penn. · Vol. 14, No. 2 (1990), p. 14

Jack Rarig, Catawissa, Penn.: “Wood cutting is an easy all-day job with our 1989 Stihl 028 Wood Boss Super chain saw,” says Jack. “It's lightweight, quiet, uses very litle fuel, and is equipped with a chain brake and low-kickback bar and chain. Starts even in 20° below temperatures.” Jack’s “worst buy” is his 1988 Massey Ferguson 220 square baler. “The knotter stopped cutting twine on the LOth to 15th bale, but we didn'tnotice the problem until we saw 50 to 100 ft. of twine trailing behind the baler, attached to the last tied bale. It misses 2 or 3 bales each time this way, Our dealer can’tsolve the problem. Glad I didn’t trade my old New Holland baler.”

New Holland 144 hay inverter

5 Best Buys0 Worst Buys
Best Buy
Luke Swantz, Kalona, Iowa · Vol. 26, No. 2 (2002), p. 17

“Our 1990 New Holland 144 hay inverter is an excellent machine. It handles hay very gently without knocking off leaves like a conventional hay rake or tedder. It speeds up drying time by 12 hours, or more. It also doesn’t rope up the hay like a conventional rake does.”

Best Buy
Jeff Houser, Aztec, N.M. · Vol. 18, No. 4 (1994), p. 16

Jeff Houser, Aztec, N.M.: “Our 1991 New Holland 144 ground-driven hay inverter is one of our best buys ever. It cuts hay drying time almost in half without any noticeable damage to alfalfa leaves. Also, if mowed hay gets rained on it'll speed drying time without damaging the hay. We're well pleased with it.”

Best Buy
Everett Marsh, Cranberry, Penn. · Vol. 14, No. 6 (1990), p. 14

Everett Marsh, Cranberry, Penn.: "My 1989 New Holland 144 hay windrow-inverter is a best buy. It does a nice job of turning windrows upside down, dropping them off to the side on dry ground. It's areal life saver for windrows that get rained on or are damp from laying overnight or that were raked before they were completely dry.”

Best Buy
William Braymen, Coin, Iowa · Vol. 14, No. 6 (1990), p. 14

William Braymen, Coin, Iowa: Everett Marsh, Cranberry, Penn.: "My 1989 New Holland 144 hay windrow-inverter is a best buy. It does a nice job of turning windrows upside down, dropping them off to the side on dry ground. It's areal life saver for windrows that get rained on or are damp from laying overnight or that were raked before they were completely dry.”

Best Buy
Curtiss Berndt, Freesoil, Mich. · Vol. 14, No. 3 (1990), p. 13

Curtiss Berndt, Freesoil, Mich.: “Itturns the windrow completely over on dry ground todry hay fast,” says Curtiss about his 1989 New Holland 144 ground-driven windrow inverter. “Handles any size windrow.”

New Holland 273 small square baler

5 Best Buys0 Worst Buys
Best Buy
Donald R. Miller, Dongola, Ill. · Vol. 22, No. 2 (1998), p. 15

“My 1991 Mercury Marquis is a good car. “My 1985 Hesston 5510 big square baler is the most trouble-free piece of machinery I’ve ever owned. “My 1972 Chevrolet pickup is still going strong after 25 years. My 1988 Chevrolet pickup equipped with a 4.3 V-6 engine also works good. “Other best buys include my Homelite XL12 chain saw, New Holland 273 small square baler, and 1964 Allis-Chalmers D17 tractor.”

Best Buy
Elmer Schafer, Jackson, Minn. · Vol. 17, No. 5 (1993), p. 16

Elmer Schafer, Jackson, Minn.: “My 1980 New Holland 273 small square baler is my best buy. It just keeps doing the job. One year it went an entire scason without missing a single bale. We use it to bale alfalfa, grass hay, straw, and along road ditches. It can be easily adjusted for any condition,”

Best Buy
Charles Svetlik, Beavercreek, Ore. · Vol. 15, No. 1 (1991), p. 12

Charles Svetlik, Beavercreek, Ore.: In May of 1990 Charles purchased two ProQuality hay baskets after reading about them in FARM SHOW magazine. “They work great,” says Charles, “Each basket holds 110 to 120 bales and self-dumps its entire load by opening the back gate. pull them behind my New Holland 273 baler and 36 hp Kubota tractor. I no longer have to leave bales in the field where they can get rained on, When a sudden rainstorm does come up, I cover the baskets with a tarp. My customers are delighted thatthey don’thave to drive around the field loading hay. I pull the baskets on the highway at 35 to 45 mph. We're thinking of using the baskets as feeders and we might also use them to haul wood. I’m now Oregon's first and only dealer of “Hay Baskets”. “My 1989 Kubota 2850 DT tractor equipped with a model 500 loader is a worst buy. The biggest problem is parts availability. If I send the tractor in for repairs under warranty it takes five to eight days to get it hack.”

Best Buy
Arnold Heeren, German Valley, IL · Vol. 11, No. 6 (1987), p. 12

Arnold Heeren, German Valley, Ill.: “We have a General Electric kitchen clock we bought new in 1950 that keeps perfect time. Our Whirlpool 21 cu. ft. freezer bought new in 1955 has never Had a service call, And we can bale an entire season with our New Holland 273 baler without missing a tie.” Gordon Briley, Johannesburg, Mich. “We like our Deere 3150 4-WD tractor,” says Gordon about his “best buy”.

Best Buy
Robert & Gary Yakesh, Bloomer, Wis. · Vol. 9, No. 5 (1985), p. 12

Robert & Gary Yakesh, Bloomer, Wis.: "Our New Holland 273 baler with a belt kicker bought in 1972 is by far our best buy ever. We put up 20,000 bales each year and, in all the time we've owned it, it hasn't mis- tied more than 1 or 2 bales a year. It has high capacity, is dependable, and requires very low maintenance. We've only put about $200 into it since we bought it. Most of the chains are still original."

New Holland 311 baler gave us

2 Best Buys3 Worst Buys
Worst Buy
Jim Winters, Finch, Ont. · Vol. 23, No. 3 (1999), p. 16

Jim’s “all time best piece of equipment” is his 20-year-old International 2250 loader. “It still works great and the best part is the ease with which it goes on and comes off the tractor.”

He’s also happy with both his 1997 Case-IH 1020 flex head and his 1998 Case-IH 600 forage blower. “The head works exceptionally well in down and tangled beans. With the automatic header height control, it’s one of the most satisfying machines I’ve ever operated. As for the forage blower, we had a Model 56 blower for 15 years and thought it was great - until we tried the 600.”

On the negative side, “It’s not exactly the worst product I’ve ever owned, but our New Holland 311 baler gave us considerable trouble. Most of it was with the driveline. I purchased the baler new in 1990 and replaced three or four U-joints per year. When we couldn’t seem to find the root of the problem, I finally replaced it with a 575. It’s a much better machine.”

Worst Buy
Dean Wolfe, Howard, Ohio · Vol. 17, No. 3 (1993), p. 16

Dean Wolfe, Howard, Ohio: A 1992 Ford F-250 4-WD SuperCab pickup rates as Dean’s “best buy”. “This is our fourth F250 and they've all been excellent vehicles. “My New Holland 311 baler is a big disappointment. It has made less than 5,000 bales but already we’ve had to replace knotters, and several other parts.”

Best Buy
Lawrence Link, Conklin, Mich. · Vol. 14, No. 1 (1990), p. 13

Lawrence Link, Conklin, Mich.: Lawrence's “worst buy” is his 1989 Gehl chopper box model 970 equipped with an extension feeder, “While I’m feeding chopped hay into a bunk feeder, the hay gets under the cross conveyor chain and plugs it up, leading to broken parts and down time.” His “best buy” is a 1988 New Holland 311 baler equipped with a bale thrower. “It's a great time saver,”

Best Buy
Bud Schriber, Attica, Mich. · Vol. 13, No. 4 (1989), p. 13

Bud Schriber, Attica, Mich.: “It has amazing capacity for a small baler and offers smooth operation and convenient maintenance,” says Bud about his “best buy” 1988 New Holland 311 baler. “It’s an allaround good machine.”

Worst Buy
Ernie Oshost, Star, Alberta · Vol. 13, No. 2 (1989), p. 13

Ernie Oshost, Star, Alberta: A 1985 White 272 28-ft. disk heads Emie’s “worst buy” list. “During the first year I replaced three gang axles and all bearings on the front gangs. During the next two years I replaced five more axles and eight bearings. The disk was equipped with flex hangers but they didn’t keep the axles from breaking. We traded it in for an Ezee On 1600 which has worked fine.” Emie says his 1977 Deere 4430 diesel tractor is a “best buy”. “It has 3,400 hours with no downtime.” Robert Chase, Port Alberni, British Columbia: “My 1987 New Holland 311 baler doesn’t make even bales. It’s a worst buy.” Sheldon Wambaldt, Kentville, Nova Scotia: “My worst buy is my 1987 Massey Ferguson Landini 7830 2-WD tractor. I had to replace the entire rear end and three right front spindles, and completely rebuild the front end. When the front tire went flat, a750 by 20 size, I couldn’t find another one like it in Canada. To solve the problem, I had to weld two 16-in. rims onto the centers of the old rim. Also, this tractor has no power and it smokes. ; “Another worst buy is my 1986 Belarus manure spreader, Ever since it broke two years ago, I’ve been unable to get parts from the dealer or the company. I had to buy a second spreader while the Belarus sits idle.”

New Holland 660 round baler

4 Best Buys1 Worst Buy
Best Buy
James Hulm, Timber Lake, S. Dak. · Vol. 22, No. 1 (1998), p. 17

“My best buy is my 1992 New Holland 660 round baler. It makes a good, tight bale. We’ve used it to make more than 6,000 bales with very few repairs. “My 1989 Polaris 4-WD ATV is a best buy. I use it hard almost every day and it just keeps on going. “My worst buy is my 1988 Du-Al 305 front-end loader. The seals on the hydraulic cylinders keep blowing out. Another problem is that the lift cylinder rams are hollow with a thread-in pin end that’s made from cast iron. We’ve had to replace the one on the left side five times in the last two years. The company says there isn’t a problem.”

Best Buy
Kevin Jones, Mound Valley, Kan. · Vol. 20, No. 2 (1996), p. 16

“It’s simple and easy to operate and makes nice, tight bales,” says Kevin, pleased with his 1994 New Holland 660 autowrap round baler.

“I’m disappointed with my 1995 Deere 450 grain drill. The depth gauging press wheels are hard to adjust and I can’t get it to cover the seed adequately. It just scatters seed on top of the ground. It was put together wrong when it was delivered so I had to change some things. But it still doesn’t work right.”

Best Buy
David Warburton, Chinook, Mont · Vol. 19, No. 1 (1995), p. 14

David Warburton, Chinook, Mont.: “I like my 1994 New Holland 660 round baler. It bales everything I ask it to. If it had a wider pickup it would definitely be the best round baler on the market.”

Worst Buy
Vance Vesco, Lovelock, Nevada · Vol. 18, No. 6 (1994), p. 15

Vance Vesco, Lovelock, Nevada: Vance nominates his 1993 Chevrolet 3500 4-WD Dually pickup equipped with a 6.5liter diesel engine as his “best buy”. “Having previously owned pickups equipped with 6.2-liter diesel engines and 454 cu. in. gas engines, I truly appreciate the power and economy of this model. Power is comparable to a 454 cu. in. engine, but fuel efficiency is almost twice as good. I also like the comfortable ride and cab appointments.” He was disappointed with his 1993 New Holland 660 round baler when he first bought it. “There was too much paint on the tieing system and the belts were poor - I ruined two of them. It also had poor electric switch adjustments. The dealer tried to help but couldn’t so Thad to take care of all the problems myself. Now that I’ve made over 1,000 bales with it and know how to work on it, it makes beautiful bales and it can really handle a lot of hay. I haven't plugged it up yet.”

Best Buy
Stewart Hammer, Eastend, Sask. · Vol. 18, No. 6 (1994), p. 16

Stewart Hammer, Eastend, Sask.: “I'm pleased with my 1993 New Holland 660 autowrap round baler, T made almost 1,000 bales with it this year with few problems. It makes great bales in any size I want and is simple to operate, It has a declutching mechanism that eliminates the need to disengage the pto and the bale kicker eliminates the need to back up. It takes only about “It makes great bales in any size I want and is simple to operate.” 30 seconds to tie a bale.”

New Holland 664 round baler

4 Best Buys1 Worst Buy
Best Buy
Darin Holste, New Market, Iowa · Vol. 34, No. 4 (2010), p. 13

“My 1998 New Holland 664 round baler has been trouble-free and does a good job.

“My 2007 Bison 3-pt. mounted blade wore out within 2 years. It needed new pins and bushings. Nothing on it is greasable. I’m very disappointed with it.”

Best Buy
John F. Boake, Nesbitt, Manitoba · Vol. 25, No. 5 (2001), p. 14

John’s impressed with his 1997 Yamaha Big Bear 4-wheel ATV. “I don’t know what we did before we bought this ATV. We use it for almost everything. We had a few minor problems with it, but the dealer promptly took care of them.

“Over the years I’ve bought three different GM 3/4-ton 4-WD pickups and they’ve all been best buys. They’ve all been reliable and needed only a few minor repairs.

“My 1997 PMI 1511 round baler is my worst buy. The drive sprocket fell off and one end of the baler pickup fell off causing it to fold up like an accordion. The pickup had to be replaced and the company wouldn’t help at all. After I got it back the rollers started scraping, hydraulic cylinders broke, and some bearings gave out. I finally replaced it with a New Holland 664 baler.”

Best Buy
Jerry Hessman, Dodge City, Kan. · Vol. 25, No. 1 (2001), p. 14

Jerry bought his New Holland 664 round baler used with less than 500 bales through it. “The company said that because I was the second owner they wouldn’t pay for warranty and factory updates. This caused some stressful moments between me and the dealer, but eventually we did get most of the warranty work and updates taken care of. All in all it’s a super baler.

“My Case-IH 8850 HP self-propelled discbine equipped with a Cummins diesel engine is a best buy. This machine has a lot of capacity and will cut, crimp, and wind-row 10-ft. tall sorghum at a field speed of about 6 to 8 mph. The high capacity is made possible by a 10-ft. intermeshing crimper that’s designed to pull the crop through and into a windrow. It will also cut alfalfa at a field speed of about 8 to 9 mph – if the driver can stay in the seat. The machine comes equipped with a seat belt and because we go so fast we use it almost all the time. The only negative is that it doesn’t work well in short, thin alfalfa or grass. But it isn’t usually profitable to harvest such a crop anyway. This swather normally lets me bale two to three days sooner because it crimps more of the crop, which causes it to dry faster and more evenly.

“The machine has a wider wheel spacing than my previous swather so I built my own trailer in order to transport it on the road. I mounted a 12-ft. wide deck on top of a truck chassis and added a dove-tail ramp, which makes it easy to load and unload. It’s safer than pulling a trailer with an oversized load.”

On the “worst buy” side, Jerry lists his Farm Chore pressure washer that’s powered by a 4 hp gas engine. “After about 10 hours of use the wand wouldn’t turn on. I took it back to the store and they replaced it. Then after I used it less than 50 hours again the pump wouldn’t build pressure. It didn’t have warranty coverage so I took the washer to a local industrial dealer. However, he wouldn’t even look at it because it said it was a ‘throwaway’ pump. We took it apart and found that it was made entirely from plastic and aluminum. The company doesn’t offer a repair kit. I now have a 4 hp gas engine that’s ready for use on a lawn mower or another piece of equipment.” etc.”

Best Buy
Jerry L. Berry, Chadron, Neb. · Vol. 24, No. 5 (2000), p. 16

“I like myNew Holland 664 round baler. All I have to do is put twine in and start baling.”

Worst Buy
Helburn Tapp, Morganfield, Ky. · Vol. 23, No. 3 (1999), p. 15

“My worst buy is my 1997 New Holland 664 round baler equipped with a Bale Command plus monitor. The problem is that the part of the monitor that’s supposed to guide the operator doesn’t work properly. My dealer tried

New Holland 851 baler

5 Best Buys0 Worst Buys
Best Buy
Dorse Childers, Esbon, Kan. · Vol. 24, No. 5 (2000), p. 17

Dorse is impressed with his 1982 New Holland 851 baler which he bought used 1 1/2 years ago. “I like the automatic tie system and how it starts the bale without any problems. I can see inside the baler when it’s baling so he can drive to make a full bale on both ends.”

Best Buy
Carl Setlak, Standish, Mich. · Vol. 17, No. 5 (1993), p. 15

Carl Setlak, Standish, Mich.: Car! Setlak, Standish, Mich.: “Ithandles well and does excellent work,” says Carl, generally pleased with his 1992 Deere 9400 combine. “The cor head works great. The floating soybean head works well in small grain, but it’s a nightmare to use in soybeans. My dealer can’t seem to solve the problem. I’m very disappointed with it.” Thomas W. Biddle, Geddes, S. Dak.: Thomas owns a “best buy” 1982 New Holland 851 big round baler. “It’s a good baler and has generally been maintenance-free. The only problem it has is with straw that’s short and dry, When the bale gets about 1/3 full itquits turning. Otherwise, Idon’tknow how this baler could be improved.”

Best Buy
Bradley A. Mills, Haviland, Ohio · Vol. 10, No. 2 (1986), p. 13

Bradley and the heater pipes that go over the turbo rusted through from the heat but weren’t listed in the parts book. “My best buy is a 1983 McCulloch Pro Mac 610 chain saw with a 16-in. bar. It seems well-balanced and has plenty of power. | like the automatic oiling.” Nelson E. Brown, Athabasca, Alta.: “It starts and bales with no fussing in any kind of hay. It only quit once in very dry straw, It has an open throat so the leaves aren't mashed off as with balers that have feed rolls in front,’ says Nelson, pleased with his New Holland 851 round baler. He's disappointed with his White 2-85. “This tractor is nice to handle and has good power but at 628 hrs. the spider gears went out and the chips broke the pump shaft so it didn’t oil the transmission, causing it to seize up. It cost $4,300 to fix. The company paid $1,500. At 812 hrs., the power steering cylinder broke off for another $650."

Best Buy
David Voges, Terre Haute, Ind. · Vol. 9, No. 6 (1985), p. 12

David Voges, Terre Haute, Ind.: "The dealer made a good attempt to get the baler running correctly but it would seldom bale 60 to 70% good bales in alfalfa. A real lemon, even with new parts installed," says David, disappointed with his 430 International baler. He also had bad luck with his 360 Homelite chain saw. 'Cuts good when running but costs $30 to $40 per year for maintenance beyond normal replacement of the chain and bar." David's pleased with his Deutz 100-06 tractor and 4 pieces of New Holland hay equipment.' The tractor's economical to operate and trouble-free. Good dealer service. We've also had good service from our New Holland 851 round baler, 320 sq. baler, 1032 bale wagon, and 890 2-row forage chopper. Any new equipment we buy will be Deutz or New Holland." Stephen Harlow, Gainesville, "Tex.: He lists his New Holland 855 round baler and model 80 round bale mover as 'best buys'. 'The 855 makes real good bales. When the bale indicator shows nearly full, weave back and forth across the windrow and always get a real good level top bale. The auto tie and chain oiler work great, too. I like the way the 80 bale mover easily gets under bales."

Best Buy
Marc Reising, Wauzeka, Wis. · Vol. 8, No. 3 (1984), p. 10

Marc Reising, Wauzeka, Wis.: Marc nominates his New Holland 851 round baler and his New Idea 244 manure spreader as “best buys”. “The baler is easy to get started and the automatic tie is a time saver. It makes a good bale and it’s a well-built ty te se Linate iis machine. The spreader is heavybuilt, and does an excellent job. Pulls easy for a tandem axle spreader."

Worst Buy
Perry Hathaway, Claypool, Ind. · Vol. 38, No. 2 (2014), p. 14

“I’m disappointed with the 20-lb. Mantis rototiller I bought to till my wife’s raised garden beds. When going forward the tiller jumps like a rabbit. I called the company and they said to run the engine at half throttle and till pulling backward. However, the advertisements and the salesman didn’t say to till backward. Another problem is that 5-in. tall weeds wrap around the tines and build up to the point where they eventually kill the motor.

“My New Holland TN75 front wheel assist tractor equipped with a Quickie front-end loader starts poor in cold weather and has poor visibility. The controls aren’t very handy either.

“My 1984 White 2-55 front wheel assist loader tractor has more than 11,000 hrs. on it. I use it to feed cattle, handle bales, plow snow and do other loader work. It starts good in cold weather.”

Worst Buy
Earl A. Mueller, Hermann, Mo. · Vol. 37, No. 6 (2013), p. 13

Earl’s disappointed with his New Holland TN75 tractor. “The paint peeled off the hood, and 3 hydraulic pumps failed in just one year.”

Worst Buy
Delbert F. Hall, Buckhannon, W. Va. · Vol. 32, No. 5 (2008), p. 14

Delbert’s pleased with his Shindaiwa T230 series weed trimmer. “It always starts, has a lot of power, and cuts great with either string or blade.”

On the “worst buy” side, he lists his 2002 New Holland TN75 tractor. “The paint peeled off the hood in huge strips, exposing the grey primer. The paint is also peeling from the fenders, exposing the black primer paint. The paint started peeling when the tractor was only two years old. Almost every other TN model I’ve seen has the same problem. One dealer told me it was common knowledge that the paint peels on the TN series. My dealer can’t provide any help, and the company refuses to repaint it. If this was a car, it would already have been recalled.”

Best Buy
Bill Takacs, Chagrin Falls, Ohio · Vol. 28, No. 3 (2004), p. 14

“My New Holland TN75 tractor does everything I ask it to. It would be nice if the tractor was built a little heavier, and I wish the seat could be folded over to keep rain or snow off whenever you have to get off the tractor temporarily.”

Best Buy
William S. Fowler, Jamestown, Mo. · Vol. 28, No. 2 (2004), p. 13

“My 2003 New Holland TN75 is a good, medium range 4-WD tractor. My only complaint is that the cab could be slightly bigger.”

New Holland 479 haybine

4 Best Buys0 Worst Buys
Best Buy
Tom Johnson, Pennellville, N.Y. · Vol. 18, No. 5 (1994), p. 15

Tom Johnson, Pennellville, N.Y.: “My best buy ever is my 1972 New Holland 479 haybine. It works almost perfect. The only breakdown it ever had was due to a failed bearing. I don’t think we'll ever own another machine that works this well, “Tlike my 1994 Zimmerman 40-ft. hay elevator, A lot of big companies don’t bother to make small equipment like this, It has a heavy-duty chassis and direct gear drive which is a great idea - there are no chains or belts to slip. “My 1986 Ford LT11 riding mower is a worst buy. The deck is poorly designed and built. We finally replaced it with an International Cub Cadet 1225 garden tractor. It’s a big improvement.”

Best Buy
Gary Jones, Coleman, Mich. · Vol. 14, No. 4 (1990), p. 14

Gary Jones, Coleman, Mich.: “My New Holland 479 and 316 have been best buys. Very few breakdowns.”

Best Buy
Gary Jones, Coleman, Mich. · Vol. 14, No. 2 (1990), p. 13

Gary Jones, Coleman, Mich.: “My New Holland 479 haybine and 316 baler are both best buys. Very few breakdowns with the haybine in 10 years,”

Best Buy
Chuck Diel, Noble, Ill · Vol. 12, No. 4 (1988), p. 12

Chuck Diel, Noble, Ill: His Gehl 125 grinder-mixer heads his “best buy” list. “It has required no repairs and little maintenance.” John F, Phelan, Perry, Iowa: “I bought my 1981 Case 2290 tractor used about a year ago with 1,700 hrs. on it. It’s my best buy because it uses no oil between changes and has plenty of power. I like the quiet cab. “Another best buy is my New Holland 479 hay conditioner that I bought years ago. It's been a faithful workhorse for many years with almost no down time. I'm also still using a 30-year-old New Holland 68 baler. New Holland builds equipment to last.”

New Holland 570 square baler

4 Best Buys0 Worst Buys
Best Buy
Tom Ross, Carthage, Texas · Vol. 47, No. 6 (2023), p. 12

“My 1989 New Holland 570 square baler is my best buy. It has baled thousands and thousands of bales without any issues. I’ve only done regular maintenance like overhauling the plunger and knotter and replacing regular wear items. I’d purchase another one in a heartbeat. I highly recommend.”

Best Buy
Cecil J. Nix, North Bend, Oregon · Vol. 40, No. 5 (2016), p. 14

“My New Holland 570 baler is dependable and always makes a nice bale.”

Best Buy
Chris Reinke, Morrison, Tenn. · Vol. 33, No. 1 (2009), p. 14

Chris likes his New Holland 570 small square baler. “I bought it when I had to replace an old Massey baler. Talk about a difference -the New Holland is a lot bigger yet it doesn’t even seem like I’m pulling a baler because it runs so smooth and quiet.”

Best Buy
Wayne Grebinoski, Holdingford, Minn. · Vol. 20, No. 2 (1996), p. 15

Wayne’s the owner of a “best buy” 1994Bobcat753 skidsteer loader. “It’s truly a well-built product. It’s my second Bobcat and both have performed very well. They’re easy to service and trouble-free. We use them every day to load manure, move round bales, haul silage, etc. They always start right up no matter what the conditions. I’d definitely buy another one.

“I like my 1993 New Holland 570 square baler. It has a lot of capacity and does a good job of tying bales.”

On the minus side, he lists his Gehl 1060 forage harvester. “It seemed that I couldn’t use it for even a single day without something going wrong on it. Soon after it was delivered to our farm the wheel bearings went out. The roller chains wore out fast and other bearings also went out. The blower bands lasted for only one season. It has a lot of capacity but requires a lot of power. Also, parts for it were expensive. I got rid of it and bought a 1995 New Holland 790 forage harvester which I really like. It’s much easier to service and pulls easy.”

New Holland 575 small square baler

2 Best Buys2 Worst Buys
Best Buy
Brian Harp, Blossvale, N.Y. · Vol. 35, No. 1 (2011), p. 15

“The 1998 New Holland 575 small square baler I bought used three years ago is my best buy. It replaced my 30-year-old IH 430 baler, which was a good machine but lacked the capacity we needed. The New Holland model will eat a huge amount of hay and has a wide pickup to get all the hay in heavy windrows. I read some literature that claims you can make up to 200 bales per hour with this machine. But I can testify that we’ve made 435 bales per hour. I’m sure New Holland will love to hear that.”

Best Buy
Ray Tuchscherer, Langley, B.C. · Vol. 31, No. 1 (2007), p. 13

“I’m happy with my New Holland 575 baler, which I bought used. The previous owner had used it hard and it needed some tender loving care, but after making some minor repairs it has worked great. It has a lot of capacity and has required only routine maintenance.

“I also like my 1999 Dodge 3500 pickup equipped with a Cummins diesel engine.”

On the minus side, he isn’t pleased with his Zweegers Fanex 780 hay tedder, which he bought used. “The wheel axle shafts are too light. I broke three out of a total of six. Also, the gearbox is too small and heats up badly.”

Worst Buy
Frank Hofmann, Oxford, N.Y · Vol. 19, No. 5 (1995), p. 15

Frank Hofmann, Oxford, N.Y.: Frank likes his 1989 double rake hitch manufactured by Ernest Steiner that he read about in FARM SHOW (. E, Steiner, 1202 Dalton Foxlake Road, Dalton, Ohio 44618), “It eliminates the need for another tractor and works on odd-shaped fields and steep hills with no problems.” On the negative side, he’s had problems with his 1995 New Holland 575 baler. “The baler works fine but the company made some major engineering oversights when they designed it. In some conditions, long hay tends to wrap up on the forks that carry the hay across to the chamber, causing a pin to shear. It’s almost impossible to replace in the field. Also, it’s almost impossible to move the wagon hitch into position for road transport.”

Worst Buy
David Janssens, Surrey, B.C. · Vol. 15, No. 2 (1991), p. 13

David Janssens, Surrey, B.C.: David nominates his 1990 Ford New Holland 575 baler as a “worst buy”. “It's equipped with a ‘revolutionary’ new rotary feed system that’s supposed to direct hay into the baling chamber. However, hay tends to wraparound the rotor shafts. I’ve adjusted timing of the rotors by as muchas 180 degrees and yet the problem persists. I've already replaced a rotor shaft and some bearings. A neighbor who owns the same baler has also replaced a rotor shaft as well as all six bearings.” On the other hand, David says his 1990 Ford TW-35 tractor is “a pleasure to drive. The hydraulics are very responsive and the mechanical front wheel drive provides plenty of lugging power. It has a quiet cab and smooth ride.”

New Holland 688 round baler

3 Best Buys1 Worst Buy
Best Buy
Gary Stern, Halliday, N. Dak. · Vol. 28, No. 4 (2004), p. 12

“I’m well satisfied with my 2002 New Holland 688 round baler. It’s a well-built, large capacity baler. The grease zerks on it are well marked and easy to find. I like the way the pickup attachment floats and also the way it picks up hay. It has a hydraulic lift that makes nice, even, tight bales. Overall, it’s an enjoyable machine to operate.”

Worst Buy
Joe G. Eilert, Jewell, Kansas · Vol. 28, No. 2 (2004), p. 13

“My 2000 Sunflower 35-ft. V-plow is my best buy. It was an unused model that I bought last year. It has seven 5-ft. blades on it as well as conservation treaders. I used the plow for the first time last year on unworked wheat stubble. The ground was so hard and dry that nothing else would penetrate it, but this plow performed flawlessly. We also used it last fall to apply 600 acres of anhydrous ammonia. This plow works great and fits terraces like a hand in a glove.

“My worst buy is my 2001 New Holland 688 round baler. I traded a well worn 530 Deere baler for it. The Deere baler was reliable, but the New Holland machine had trouble from the start. The dealer and I tried to make it work for two years without success. We both became very frustrated. I had to use a loaner baler to make most of my hay. The dealer tried hard to solve the problem, but company support was bad. The dealer had all his mechanics on my farm at various times. We finally started using parts from a burned-out salvaged machine just to get the machine to work. I recently traded it in for a Deere 567 baler. No more New Hollands for me.”

Best Buy
Jeff Kilzer, Bentley, N. Dak. · Vol. 25, No. 5 (2001), p. 14

“My 1999 New Holland 688 round baler makes picture perfect bales every time. It has made more than 3,000 bales. The only problem is that the twine from one ball doesn’t always continue on to the next ball.”

Best Buy
Dean McDaniel, Beaver, Okla. · Vol. 25, No. 2 (2001), p. 15

“My New Holland 688 round baler does a great job of starting bales and makes them nice and tight. It also does a good job ejecting bales.

“My Vermeer 605J round baler is my worst buy. I bought it to put net wrap on my bales but found that it did a poor job. I could put one good wrap on, but then the next bale would have too much wrap on one side and not enough on the other. I finally traded it in for a New Holland.”

New Holland LS 170 skid loader

4 Best Buys0 Worst Buys
Best Buy
Donald B. Colvin, Whittemore, Mich. · Vol. 36, No. 3 (2012), p. 15

Donald’s the proud owner of a 2006 New Holland TM-140 4-WD tractor equipped with a New Holland 62LB front-end loader. “This tractor has about 3,300 hours of use without a single problem. It always starts, even in the coldest weather.

“My 2006 New Holland LS 170 skid loader has also been trouble-free, other than the replacement of 2 bearings and a couple of hydraulic hoses.”

Best Buy
Rick Loganhill, Versailles, Mo. · Vol. 36, No. 2 (2012), p. 12

“I use my 2003 New Holland LS170 skid loader every day and it now has about 12,000 hrs. on it. I’ve replaced the starter and alternator and rebuilt the hydrostatic pump, but otherwise it has been trouble-free.

“I’ve had problems with my Deere 4024TF 270 diesel engine. At only about 400 hrs., we had to take the engine back to the dealer for repairs not covered by the warranty. They installed a new rack, adjusted pumps and the governor, changed the oil, filters and glow plugs – and then charged me $3,075.31. What’s more, the engine ran even worse and smoked when I got it back. At about 1,000 hrs., we had to redo the head and then totally rebuild the engine.”

Best Buy
Paul Zimmerman, Jr., Rutledge, Mo. · Vol. 35, No. 4 (2011), p. 15

“My 2004 New Holland LS 170 skid loader runs good and can haul heavy loads. It has about 3,000 hours on it with no problems.

“I didn’t use my 2005 Makita cordless drill very long before the gears stripped. Of course, the warranty had already expired.”

Best Buy
John Slater, Olin, Iowa · Vol. 31, No. 4 (2007), p. 14

John nominates his 2003 New Holland LS 170 skid loader as his “best buy”. “It replaced a 1983 Case 135B model which was a good machine, but the New Holland unit is bigger and more fuel efficient. Also, it works faster, starts better, and is easier to service. It can be used with a lot of different attachments.”

New Holland 1475 swather

3 Best Buys0 Worst Buys
Best Buy
Harold G. Painter, Springview, Neb. · Vol. 33, No. 2 (2009), p. 15

“My 2000 New Holland 1475 swather has had no problems. It does a good job in all kinds of crops whether it’s 6 to 8-ft. tall sudan or 8-ft. high meadow hay.

“I also like my 2005 New Holland 780 baler. No problems.

“My 2004 Husqvarna 345 chainsaw is my worst buy. It worked fine for three years until the blade oiling system quit working. The dealer worked on the problem for five or six months with no luck. I took the saw to another man who, after three or four months, finally got the oiling system to work a little. However, he accidentally broke the clutch. I took the saw back and he fixed it. Finally, I was able to start using my saw again last fall.”

Best Buy
Ron Wieseler, Orient, S. Dak. · Vol. 26, No. 3 (2002), p. 16

A New Holland 1475 18-ft. Haybine rates as Ron’s “best buy”. “It floats right over rocks and cuts both tall and short hay without needing any adjustments.

“My Haybuster 2620 bale processor is a best buy. It reduces waste and also makes the hay more palatable for our cows. As a result, the animals can now get by on about one third less hay.”

Best Buy
Joe Chase, Walsey, S. Dak. · Vol. 24, No. 6 (2000), p. 17

“We love running this machine,” says Joe about his 1998 New Holland 1475 18-ft. Haybine. “We’ve used it to cut more than 1,000 acres. The only way it could be improved would be if the reel could be raised up which would make it easier to work on the sickle.”

New Holland 166 hay inverter

3 Best Buys0 Worst Buys
Best Buy
Mark Troyer, Fredericksburg, Ohio · Vol. 22, No. 4 (1998), p. 16

“Our 1996 Massey Ferguson 390 front wheel assist tractor is a compact, powerful, handy tractor with good power steering. It makes an excellent loader tractor.

“Our New Holland 166 hay inverter is a neat piece of machinery and does a great job of gathering two or three windrows into one. Since using the inverter we’ve found that we need to make only 1/2 to 1/3 as many trips over the fields with our heavy forage harvesting equipment. Also, the inverter picks up far fewer stones than a rake does.”

On the minus side, he lists his New Hol-land 40 silo blower. “This 1,000 rpm blower was constantly plugging. We couldn’t solve the problem so we traded it in for the company’s model 60 blower. It delivers haylage into our 108-ft. high silo with ease.”

Best Buy
Dean Taylor, Blissfield, Mich. · Vol. 21, No. 1 (1997), p. 16

“It does an excellent job of flipping and fluffing windrows and handles them gently,” says Dean, pleased with his 1994 New Holland 166 windrow-inverter.

Best Buy
Arden Johnson, Scandia, Minn. · Vol. 20, No. 3 (1996), p. 16

“I like my New Holland 166 windrow inverter. It turns hay over more uniformly than a rake which allows the damp underside of the windrow to dry rapidly. Last year we had a lot of wet weather and without the inverter I would’ve had a hard time putting up any dry hay. Another advantage is that it’s gentle on hay which results in less leaf loss than you get with a rake. I recommend purchasing the optional second gauge wheel. “I purchased a Deere 6400L MFWD tractor equipped with a front-end loader last year. I’m quite happy with it although it’s “MyDeLaval feed cart has saved many hours of feeding time and allows increased frequency of feeding which improves cow performance, primarily in butterfat test. However, it has broken down too often and it isn’t easy to work on. Also, parts for it are expensive.”

New Holland 276 baler

3 Best Buys0 Worst Buys
Best Buy
Florian Steinlage, West Union, Iowa · Vol. 17, No. 6 (1993), p. 16

Florian Steinlage, West Union, Iowa: David likes his four Sukup fans. "We air dry about 25,000 bu. of com each year at a costof less than 10 cents per bu. for electricity. Our Sukup fans work great and are really working well now that we've replaced the General Electric drip-proof 10 hp motors with totally enclosed motors. The company still won't admit that it needs enclosed motors on outdoor applications. The costto us was about $2,000. Youcouldn't give me a General Electric drip-proof motor,” Florian Steinlage, West Union, Iowa: "Our best buy lately has been our Deere 6400 tractor. We have over 500 hours on it and use it for everything. We thought we had the world by the tail with our "55" series and were worried that we wouldn't like these new tractors as well , but we really like them." Hubert Ragsdale, Wheatly, Ark., also thinks Coffey’s problem may have been caused by friction. “I’ve been a volunteer firefighter for 28 years and a fire chief for 19 years and it doesn’t seem likely to me that the cause was electrical. Look for bad bearings on drive shafts that might have heated up and ignited crop residue. Only a close and painstaking investigation will ever disclose the cause.” Jeff Greenburg, Stratford, Wis., experienced a fire in his 1990 Ford New Holland 276 that totalled the tractor, “It had 2,000 hours on it. Our hired man was driving it but, fortunately, he wasn't hurt. The fire appeared to start down in under the hood and may have been fueled by hydraulic fluid. Before the fire we had experienced problems with hydraulic hose breakage in the articulation area, where hoses, cables, wires, and driveshafts are all jammed lightly together. We were fortunate that our insurance policy provided full coverage for the loss, They never did tell us what caused the fire. I think the 276 is a tremendous tractor despite the problems we had." Emily Coffey says she still hasn’t reached a final insurance settlement with Farm Bureau Insurance, which initially offered $35,000 for the destroyed tractor and swather, which were purchased new in 1990 for $77,000. Specially trained fire investigators have inspected the tractor but had not yet come back with a final report at the time this issue went to press. She hasn’theard from anyone at Ford New Holland as to the probable cause of the fire. “One of their representatives came out after the fire and said he’d send a report, but we never heard back,” she says. Contact: FARM SHOW Followup, Emily Coffey, 6187 Independence St., Arvada, Colo. 80004 (ph 303 422-2865).

Best Buy
Ross Essary, Taneyville, Mo. · Vol. 14, No. 4 (1990), p. 14

Ross Essary, Taneyville, Mo.: “One of the best buys for my son and is a New Holland 276 baler, which we bought from afriend 10 years ago. The only expense isan occasional broken shear pin. It hardly ever makes an untied bale. “Another best buy is our 1984 New Holland 488 haybine. The only repairs have been a few broken sections and guards.”

Best Buy
Stan Sharlik, Linwood, Neb. · Vol. 12, No. 1 (1988), p. 12

Stan Sharlik, Linwood, Neb.: “These are the most trouble-free machines that have ever been made,” says Stan, pleased with his “best buy” New Holland 276 baler, 479 windrower and 1044 bale wagon. “All I’ve had to replace over the last few years are sickle sections and roller chains.” His 1984 7000 4-row Deere MaxEmerge planter and 1977 Deutz-Allis Gleaner F2 diesel combine also rank as “best buys”. “The dealer who sold me this used planter completely went over the machine and replaced any worn parts without charge. The planter operated flawlessly on corn, soybeans and grain sorghum, The combine has worked great with only two belts replaced in two years as well as an air conditioner compressor. Handles irrigated corn with no problems.” Harold T) lTanec Calumhuc Kan «+ “The dealer tried very hard to make this combine work but now he’s advised me to get rid of it,” says Harold about his “worst buy” Massey combine boughtnew in 1979. “Anything that can go wrong with a combine has gone wrong on this machine. It’s one of the hardest-to-work-on combines that was ever made. The separator clutch has gone out five times. Ithas about 700 hrs. on it. “My best buy is a 1460 International combine bought new in 1978. It’s very reliable and dependable. It’s worked almost 2,000 hrs, with just minor repairs.”

New Holland 55 hp compact tractor

3 Best Buys0 Worst Buys
Best Buy
Donald Guritz, Hopkins Mich. · Vol. 44, No. 2 (2020), p. 14

“I am very pleased with my 2017 New Holland 55 hp. compact tractor with loader, cab, heat, air conditioning, radio and 4-WD. It has good visibility, the heat is hot, the AC is cold, and it has a good lighting system. I did fabricate a 2 step entry system that bolts on over the step, as I am 74 years old.”

Best Buy
Brent Brueland, Boone, Iowa · Vol. 26, No. 4 (2002), p. 16

“My New Holland 55 hay rake is my best buy. I bought it used decades ago from the original owner, yet it’s still as tight as the day it was manufactured. It picks up hay well and does a great job of mowing.”

On the “worst buy” side, he lists his 1997 Dynamark 18 hp garden tractor. “The mower deck is built too light, the gauge wheels and cables have broken, and the spindle bearings went out. Also, parts for it are hard to find.”

Best Buy
George Strohmer, Woodstock, Md. · Vol. 25, No. 2 (2001), p. 17

“My best buy over the years is my 1955 New Holland 55 rake. I bought it in the crate for $385 and put it together myself. A dealer friend of mine joked that we could probably still buy the crate for $385. I’ve overhauled the gearbox and replaced quite a few of the teeth but I’ve raked thousands of acres with it and still use it every year. All the New Holland equipment we own are best buys.”

New Holland 640 silage

3 Best Buys0 Worst Buys
Best Buy
Ron Ratzlaff, Avon, S. Dak. · Vol. 23, No. 3 (1999), p. 14

“My New Holland 640 ‘silage special’ baler makes nice, tight round bales every time and has been maintenance-free.

“My New Holland LX885 skid steer loader has about 1,200 hours on it and is a best buy. The only problem was a fuel injector that went bad. However, the repair work was covered by warranty. In my opinion it’s the best skid steer out there.”

“A 1996 Polaris Sportsman 500 is my worst buy. The repair bills on it never seem to end. Repair work has included a camshaft, U-joint, two drive belts, and both clutch pulleys. Also, it wouldn’t shift into range easily. No dealer wants it as a trade-in so it’s costing us about 90 cents a mile to own.”

Best Buy
Beth Heller, Branch, Mi. · Vol. 21, No. 6 (1997), p. 16

Beth’s impressed with her 1995 New Holland 640 round baler. “It does the job.”

Best Buy
Harry Nolt, Lewisburg, Pa · Vol. 19, No. 1 (1995), p. 14

Harry Nolt, Lewisburg, Pa.: “I use news- paper for bedding, and the Dynavent bedding chopper with 11 hp Honda engine is my worst buy. The rotor just didn’t hold up for chopping paper. Knife holder brackets would break off and really make a mess. I put a third motor in it, then got rid of it, “My New Holland 640 round baler _ equipped with Autowrap twine tying system is my best buy. I like how easy it is to hook up, to maintain, and to operate. When you go to the field, you know you're going to get the job done. I had a little trouble with the twine wrapping system at first, but it worked fine after a few minor adjustments.”

New Holland 644 round baler

3 Best Buys0 Worst Buys
Best Buy
Glen Massey, Berlin, Md. · Vol. 25, No. 3 (2001), p. 14

Glen nominates his 1996 New Holland 644 round baler as his “best buy”. “It’s the best baler I’ve ever owned. I’ve used it to make almost 10,000 bales with only minor problems. I think it’ll hold up for several more years.”

Best Buy
D. Matheson, Embro, Ontario · Vol. 23, No. 6 (1999), p. 14

He likes his 1998 New Holland 644 round baler. “It’s very reliable and does an excellent job making tight, well-formed bales. We’ve used it to make 2,500 bales of hay, straw, hemp, bean straw, and corn stalks with no problems. We wish we had bought it years ago.”

On the “worst buy” side, he lists his Ford New Holland 8770 Genesis tractor. “We bought it less than four years ago to replace an older White 155 tractor and expected it to run reliably for many years. But right from the start it was plagued with breakdowns, most of them minor. Then the fuel pump began malfunctioning. It took several trips to the local dealer to get it repaired. The initial repairs were covered by the 3-year warranty. We could have extended the warranty but we didn’t because the tractor had only 1,750 hours on it and we thought all the bugs had been worked out. Unfortunately, they hadn’t. Six months later the engine blew a piston even though we had always serviced it regularly. The company wouldn’t stand behind its product and pay for an obviously defective engine. We paid a lot of money for a tractor that should have lasted many more years before needing any repairs of this sort. We’re very disappointed with this tractor and with the company for not backing up its product. We’ll never buy another New Holland tractor again.”

Best Buy
C.L. Paul, Jr., Custer, Wash. · Vol. 20, No. 5 (1996), p. 16

He’s pleased with his Deutz-Allis 7085 4-WD tractor. “It shifts smoother than any other tractor I’ve ever owned. We use it to stack silage. My only complaint is that the loader lift cylinders and the hydraulic reservoir are too small. “My Hesston 555 round baler is my worst buy. I worked with the dealer for three years trying to resolve some of the problems I had with it. He did his best but the company wouldn’t help. He finally replaced it with a New Holland 644 baler.”

New Holland 650 round baler

2 Best Buys1 Worst Buy
Worst Buy
Tommy Armstrong, Bloomfield, Ky. · Vol. 23, No. 2 (1999), p. 16

“I’m well satisfied with my Case-IH 5140 Maxxum tractor which replaced my Deere 4020. It has a lot of power, starts easy in the winter, and handles well.

“My New Holland 650 round baler is my worst buy. It never worked right from day one. The hay had to be dry, the windrow just right, and the baler twine just so for it to work right. I had to have my neighbor bale half my hay just so we could get done. My old New Holland 853 baler would run circles around this model.”

Best Buy
Wid S. Keeling, Rising Star, Texas · Vol. 20, No. 5 (1996), p. 16

Wid’s the owner of a 1992 New Holland 650 baler. “It makes good tight bales but I’ve had a lot of problems with the bearings. One time I had to wait nine days for parts. It cost me a $9,000-a-year custom baling job. I bought a new New Holland 488 swather and so far it has been trouble-free.”

Best Buy
H.B. Jurgens, Buffalo, Mo · Vol. 19, No. 1 (1995), p. 15

H.B. Jurgens, Buffalo, Mo.: “I bought a New Holland 650 big round baler in 1994,” says a “very satisfied” H.B. “It makes good, solid, rain-proof bales. I also have a 1994 Dodge Dakota extended cab pickup. It has lots of snap and power with its 318 cu, in. V8 engine. We get 20 mpg on the highway.”

New Holland 790 forage harvester

1 Best Buy2 Worst Buys
Best Buy
Wayne Grebinoski, Holdingford, Minn. · Vol. 20, No. 2 (1996), p. 15

Wayne’s the owner of a “best buy” 1994Bobcat753 skidsteer loader. “It’s truly a well-built product. It’s my second Bobcat and both have performed very well. They’re easy to service and trouble-free. We use them every day to load manure, move round bales, haul silage, etc. They always start right up no matter what the conditions. I’d definitely buy another one.

“I like my 1993 New Holland 570 square baler. It has a lot of capacity and does a good job of tying bales.”

On the minus side, he lists his Gehl 1060 forage harvester. “It seemed that I couldn’t use it for even a single day without something going wrong on it. Soon after it was delivered to our farm the wheel bearings went out. The roller chains wore out fast and other bearings also went out. The blower bands lasted for only one season. It has a lot of capacity but requires a lot of power. Also, parts for it were expensive. I got rid of it and bought a 1995 New Holland 790 forage harvester which I really like. It’s much easier to service and pulls easy.”

Worst Buy
Donis Willigar, Patten, Maine · Vol. 15, No. 5 (1991), p. 12

Donis Willigar, Patten, Maine: He's unhappy with his 1989 New Holland 790 forage harvester that he uses in both corn and hay. “It doesn’t have enough capacity and continually breaks shear pins. Another problem is that the welding on a collar protecting a pair of shafts on the gearbox keeps breaking. It has broken three times so far. Recently we've had trouble with the splined end of one of the shafts chewing out the inside of the collar, ruining the collar and the shafts. The dealer repaired it. This all happened during our first silage harvest. “We contacted the company and asked them to pay the repair bill and for the cost of transporting the machine. They toldus they’d pay for part of the repair bill, but not for transport. The company admitted that this model was built with a couple problems and that our machine has both of them. “Last year the collar broke again. We made more phone calls to the company, dealer, and factory representative. LastJuly, the factory representative and a dealer mechanic came out and worked on the machine. We tried to get the company to take back our machine and give us a new one, but they refused. We honestly feel that there's no way that this will ever be a good ominate t Buys machine. It'll always be a headache for us. No amount of money can replace the down time and the losses from not being able to harvest our silage when it was ready. No ‘sorries’ or apologies will help fill the silo. I wish I had never bought it.” Donis says his 1990 New Idea model 5409 9 ft. 2 in, disc mower is a “best buy”. “It does a super job of cutting. It's very maneuverable, trouble-free, and is easy to service,” Doug and

Worst Buy
David Barker, North Leeds, Me. · Vol. 14, No. 3 (1990), p. 13

David Barker, North Leeds, Me.: “The air cooled engine on my best buy Same Mercury 85 tractor runs great and is very fuel efficient.” David’s also pleased with his 1988 165ft. Badger belt feeder and 24-ft. conveyor. On the “worst buy” side is a New Holland 790 chopper. “The first year the feed roll side plate wore out which prevented me from sharpening the knives. The dealer fixed it but still tried to charge $960 to sharpen them. The company eventually paid for it. Since then 2 more feed roll side plates have worn out and the dealer doesn’t know what to do. The second year the metal alert mechanism quit. The dealer mechanic couldn't follow the wiring diagram in the manual and couldn't find the chopper’s electric clutch. The result was $260 down the drain, We called another dealer 100 miles away who hasn't been able to fix it yet. I’ve tried calling the service center listed in the owner’s manual many times, but no one answers the phone. So far I've spent $1,300 and it still doesn’t work.”

New Holland 848 round baler

3 Best Buys0 Worst Buys
Best Buy
Jonas H. Schlabach, Millersburg, Ohio · Vol. 42, No. 6 (2018), p. 12

“My New Holland 848 round baler was one of my best buys. I only paid $2,100 for it at auction, and it works great. It’s lighter weight than many, which is important for me as I use it behind a power cart with horses.

“Where others make a soft core, the design of the 848 starts compressing the bale almost immediately. It makes a solid bale all the way through.

“We made one alteration that makes the bales even better. We replaced the bale tension springs with air shocks and put a

gauge on them. If the pressure drops as hay conditions change, we stop and put more air in with a bicycle pump. It only takes a few minutes, and our bales are always solid and uniform.

“Another change I made was to add AGCO-type gathering wheels to the hay pickup. They really pack the hay in, which also helps with a uniform bale.

“I’m told the 848 is not popular, but that’s fine with me. I got a great baler for a low price, and with a couple improvements it works even better.”

Best Buy
Randy Brooks, Peterstown, W. Va. · Vol. 30, No. 2 (2006), p. 13

“It’s one of the best balers I’ve ever used,” says Randy about his New Holland 848 round baler. “It’ll bale wet or dry hay any time and anywhere. It consistently produces solid core, 48 by 54-in. bales that always stay tight.”

Willie R. Ferguson, 1620 Centennial says. “You can use the clips that come with the post without having to buy special ones. You just slip the tool over the end of the clip and go around the wire. It really cuts down on your fencing time and is much easier on the hands.”

Best Buy
Charles Phillips, McDonald, Tenn. · Vol. 14, No. 2 (1990), p. 14

Charles Phillips, McDonald, Tenn.: Charles is satisfied with his 1989 New Holland 848 round baler. “The bales are sized “It's the cat's meow for digging holes in stoney ground and works much better than any pto-driven auger.” so that I can carry them two wide on my trailer and still be road legal.” Charles’s 1989 Ford F-800 diesel truck “has plenty of power and gets good mileage.” His “worst buy” is his 1985 Lincoln Continental 4-door car. “It vibrated badly from the start. The dealer replaced the axles and drive shaft, but the car sull vibrated so bad thatthe cruise control wentout. wanted to trade the car in, but the dealer said it had almost no resale value.”

New Holland 853 round baler

3 Best Buys0 Worst Buys
Best Buy
Stanley Overmyer, Park Rapids, Minn. · Vol. 23, No. 5 (1999), p. 14

“We’re well pleased with our New Holland 853 round baler which we bought used. It’s easy to maintain and adjust and starts a bale in any size windrow.

“We’re happy with our New Holland 469 haybine which we bought used.”

Best Buy
John Leidenix, McLaughlin, S. Dak · Vol. 19, No. 1 (1995), p. 14

John Leidenix, McLaughlin, S. Dak.: “I traded my trouble-free New Holland 850 baler in for a New Holland 853 baler that sold for $17,500, It didn’t cut the twine properly right from the start, and the pickup sheared a pin for every bale made. The bale command controls don’t work right. I spent $1,300 for a new alternator, new batteries, and rewiring but it didn’t help. The problem is that the computer won't hold what's programmed into it. The dealer can’t fix it and won't replace it. He blamed the dust, the hay, and the operator, but never the baler. The only way I can bale is to override the computer.”

Best Buy
Robert Peterson, Maple Plain, Minn. · Vol. 14, No. 6 (1990), p. 14

Robert Peterson, Maple Plain, Minn.: A 1990 New Holland 853 round baler rates as Robert’s “best buy”. “Works great and makes good solid bales.”

Best Buy
Richard Johnson, LaCrescent, Minn. · Vol. 34, No. 6 (2010), p. 15

“I like my New Holland 900 forage chopper equipped with a processor and 2-row corn head. I’ve used it for many years with very few problems. The corn head works excellent and the gathering chains on it are still good.”

Best Buy
Daniel Heike, Mondovi, Wis. · Vol. 24, No. 4 (2000), p. 15

“My 1999 New Holland 900 forage harvester, equipped with a processor, is my best buy. It has a lot of capacity and is virtually trouble-free. The processor works great for corn silage, and my cattle really like the feed. I haven’t seen a left over corn cob in our bunks yet this year.”

Best Buy
Reg Schmidt, Thorsby, Alberta · Vol. 15, No. 2 (1991), p. 12

Reg Schmidt, Thorsby, Alberta: He’s disappointed with his 1990 Gehl CB1260 forage harvester, “During the first hours of operation the header auger broke away from its drive shaft, When we removed it we found it was only partially welded. Also the auger was made of very light material compared to other forage harvesters. After a few days of use the pickup bands began breaking off. They were poorly designed and made out of thin material. As the season wore on had various problems with the Auto Max system and the header drives. I had previously owned a New Holland 900 which performed well. I thought I was moving up to a bigger, better machine. Instead paid a premium price for a big headache.” Reg's “best buy” is his 1989 Gehl SL 3310 skid steer loader. “It's very agile and powerful for its size and is well designed and well built. I especially like the ‘T’ bar controls and the flip-up canopy which makes il easy to service.”

Best Buy
Sigurd J. Grindheim, Ojibwa, Wis. · Vol. 47, No. 5 (2023), p. 15

Sigurd nominates his 2022 New Holland Boomer 40 with grapple and bucket as a best buy. “I picked up all the branches and logs that broke from ice and snow using this tractor and grapple. I never had to get off the tractor. It works great and is easy to fill with fuel while standing on the ground. It’s handy and easy to get on and off.”

Best Buy
Garry Elliott, Haverhill, N.H. · Vol. 40, No. 3 (2016), p. 15

“I love my 2012 New Holland Boomer 40 loader tractor. No problems. I use it to plow snow and even in the coldest weather it always starts. I have yet to use the block heater. During summer I use this tractor with a small backhoe, a 5-ft. bush hog, a 2-bottom plow, hay rake and hay forks. It handles 900-lb. round bales with ease. I highly recommend this tractor.”

Best Buy
Glen Hoffart, Osmond, Neb. · Vol. 39, No. 1 (2015), p. 15

A 2013 Ford F-250 crew cab diesel pickup rates as Glen’s “best buy”. “This is my fifth Ford diesel and they just keep getting better. It drives good, has room to haul our grandkids, plenty of power, and is fuel efficient.

“My 2012 New Holland Boomer 40 tractor equipped with a front-end loader is real handy and gets used all the time. The hydrostatic transmission is so easy to operate that even my grandkids can help me.”

New Holland TC40 tractor

3 Best Buys0 Worst Buys
Best Buy
Edward Weber, Cincinnati, Ohio · Vol. 50, No. 5 (2026), p. 15

Edward nominates his 2004 New Holland TC40 tractor as a best buy. “I could fit all…”

This listing is from the current issue of FARM SHOW. Subscribe to read it all or get a free issue.
Best Buy
Edward Weber, Cincinnati, Ohio · Vol. 49, No. 2 (2025), p. 12

“My New Holland TC-40 tractor I bought in 2004 is my best buy. It has 2,700 hrs. on it, not a lot for a production machine. It’s used on my small farm to mow with a 7-ft. finish mower, run a 6-ft. tiller and split wood in the winter. All the parts I’ve replaced could be carried in both hands.”

Best Buy
Jake Meyer, Loganville, Wis. · Vol. 44, No. 2 (2020), p. 13

“My 2005 New Holland TC-40 is a handy little tractor. It’s small enough to fit in tight spots but also has good power. It’s equipped with 3-pt. loader, 4-WD, and dual hydraulics. It’s useful for many tasks. It has a 12-speed transmission and left hand reverse.”

New Holland TR 85 combine

2 Best Buys1 Worst Buy
Worst Buy
Wayne Todd, Denton, Mont. · Vol. 22, No. 2 (1998), p. 14

Wayne likes his 1991 Deere 9400 hoe drills. “They work good and come with a transport hitch that’s well designed and easy to use. The metering is fairly accurate and seed placement is consistent. However, the single front wheel is too small for wet conditions. Also, the shanks around the pivot area should be built heavier. Otherwise, these drills are a pleasure to use.” His 1995 MK hydraulic drill filler heads his “worst buy” list. “It’s the worst piece of farm equipment I’ve ever owned. Installation is time consuming and difficult. The hydraulic foldup doesn’t have enough power to lift the auger and comes down way too fast. The electric solenoid valve that controls the auger doesn’t completely shut off the flow so the auger dribbles seed constantly. Another problem is that the latches on the cleanout doors are built too light. Also, the auger safety chain is too light and doesn’t stay hooked. I wish I had bought a Westfield or Brandt model instead.” “My 1982 New Holland TR 85 combine is also a worst buy. It’s probably the best overall designed and the most poorly engineered machine I’ve ever owned. It has adequate capacity for its size and threshes clean. It works well in nice, uniform, 40 to 50-bu. per acre wheat. However, it doesn’t take in heavy straw fast enough and it absolutely refuses to feed in lighter crops, particularly barley. The unloading system is too slow and is comparable to an old Deere 95. Also, the steering linkage is built too light, the hydraulics are marginal - particularly the reel speed control - and the sickle drive has problems. However, it’s an easy machine to operate and, under good conditions, saves more grain than some other brands. I’d probably buy another TR model hoping that the company engineers had learned a few things after this machine was built.”

Best Buy
Steven L. Kuhl, Bloomfield, Neb. · Vol. 16, No. 1 (1992), p. 14

Steven L. Kuhl, Bloomfield, Neb.: A 1984 New Holland TR 85 combine rates as Steven's “best buy”. “It has performed very well in all crops. I do a lot of custom work so this means a lot. However, it could have more capacity on side hills.”

Best Buy
Brad Haley, Earth, Tex. · Vol. 8, No. 1 (1984), p. 12

Brad Haley, Earth, Tex.: ‘Our New Holland TR-95 combine replaced our New Holland TR-85. The increase in capacity is amazing along with the excellent job of threshing and the clean grain sample. In my opinion it is superior to all other brands have tried. We're also pleased with our New Holland 852 baler. It makes an excellent sized bale that keeps well and feeds well.”’ the 6 gal. range,” says Gerald, happy with his Deere 4640 tractor.

New Holland TR96 combine

3 Best Buys0 Worst Buys
Best Buy
Delbert Bauersachs, Pinckneyville, Ill. · Vol. 20, No. 3 (1996), p. 14

A used 1984 Case 1896 tractor equipped with a cab and front wheel assist heads Delbert’s “best buy” list. “I bought it two years ago with only 374 hours on it. I really like the front wheel assist. “I like my 1987 Case-IH 2294 tractor which has 3,000 hours on it. We’ve spent less than $50 for repairs. However, I wish it had front wheel assist. “I like my 1992 Case-IH 7150 tractor but I don’t like the Goodyear 20-8-42 radial tires. The 7150 can go only a few feet in mud before it gets stuck because the tires aren’t self-cleaning. I’ll never buy a new Goodyear tire again. “I’m well pleased with my 1989 Great Plains 20-ft. drill. It does a good job and is well-built. “I also like my 1991 New Holland TR96 combine but I wish it had a bigger unloading auger. It has an 8-row head and in 150 bu. per acre corn it’ll fill a 270 bu. tank in only seven minutes. However, it takes almost three minutes to unload it. “I’m pleased with a used Case 870 diesel tractor I bought. It has 80 hp and burned 4 gal. of fuel per hour before I put a turbocharger on it. Now it has 125 hp and uses less than 3 gallons of fuel per hour. We use it a lot with a pto-operated agitator at our slurry tank whenever we haul manure. “I also like my new Hutchinson 8-in. dia. hydraulic swing-around hopper auger. One man can easily move it from bin to bin.”

Best Buy
Delbert Bauersachs, Pinckneyville, Ill. · Vol. 18, No. 1 (1994), p. 15

Delbert Bauersachs, Pinckneyville, Ill.: “T’'m well satisfied with my 1992 Case-IH 7150 tractor. It has 790 hours on it with no problems. It’s easy to handle and the powershift transmission works great. It's fuel efficient and, with well over 215 hp, it'll outperform my Case 2670 in the field, I use itto pull my 1992 Case-TH 496 32-ft. disk in 9th or 10th gear. The disk does a good job leveling and is also a best buy. I also use it to pull my Great Plains 20-ft. no-till drill at 9 to 10 mph. The drill does a super job. planted 6,000 acres with it and had to replace only one press wheel bearing. “I sold my Deere 7000 8-row, 30-in. planter and bought a Kinze 8-row, 30-in. planter. It’s a best buy. The Deere planter was built too light and bearings were always going out. It went through over 25 bearings in three years. The Kinze planter is built heavier so I haven't had any bearing problems in three years. My only complaint is that it doesn’t plant as evenly as the Deere planter. “My 1987 Case-TH 2294 tractor has 2,450 hours with no major problems. And I think my 1991 New Holland TR96 combine is the best combine on the market. It shells up to 1,900 bu. of corn per hour.”

Best Buy
Howard Buehler, Berthoud, Colo. · Vol. 11, No. 6 (1987), p. 14

Howard Buehler, Berthoud, Colo.: “Our 1986 New Holland TR96 has a 30-ft. "Our combine has a 30-ft. head with lateral float that works great." header with lateral flotation which works great. I also like the new quiet cab and controls. Does a great job in malt barley, wheat and corn. I’ve had few problems in 650 hrs.”

New Holland discbines

1 Best Buy2 Worst Buys
Worst Buy
James L. Osborn, Union Bridge, Md. · Vol. 42, No. 5 (2018), p. 15

“The 1990 Case IH 8920 tractor I bought used in 1994 now has almost 8,000 hrs. on it. It always starts, runs strong, has plenty of power, and shifts gears easily. The power shift transmission is very responsive. This tractor uses less fuel than I’d expect when performing heavy pto work. If a better tractor was ever made, I’m not aware of it.

“Over the years I’ve purchased several used New Holland discbines and used them a lot on my farm and to do custom work. I’m disappointed with the machines in general and their cutting modules in particular because they had a lot of problems. We got pretty good at replacing parts, but they were overpriced.”

Best Buy
Wendell Edmonson, Annandale, Minn. · Vol. 32, No. 5 (2008), p. 14

Wendell likes his 2007 New Holland discbine. “This machine is unstoppable and lets us cut much faster than we could with a haybine. It’ll cut 6-ft. tall grass hay with ease. It’s definitely a best buy.”

Worst Buy
Lee Hale, Manlius, N.Y. · Vol. 15, No. 4 (1991), p. 12

Lee Hale, Manlius, N.Y.: Lee’s “best buy” is his 1990 Krause model 6413 25-ft. disk. “It weighs seven tons and is built with cushion gangs that hold up well on our rocky soil. Other disks we’ ve tried required much more repair.” Lee’s “worst buy” is his 1990 New Holland model 411 discbine. “We hadn't even used this machine a year when one of the rotors froze up. The dealer installed an allnew cultterbar because it was cheaper than repairing it. The company wouldn’t take care of the repairs because the warranty started at the date of purchase (winter) not ninate suUys the first time the machine was used.”

New Holland hay equipment

2 Best Buys1 Worst Buy
Best Buy
Roger Veigel, Dutton, Montana · Vol. 27, No. 4 (2003), p. 14

“All my International Harvester tractors have been best buys. They seem to have more power than advertised, which I think is due to their high torque rise engineering. But they use only enough fuel to do the job at hand, whether it’s turning windrows or primary tillage. This allows me to mix and match different power units at different locations, rather than move a specific tractor to do a specific job. The 1086 model, for example, has more than 130 pto hp but because of its 105-in. long wheelbase, positive camber angle, and mid-mount cab, it handles like a tractor half its size.

“These tractors also have ample hitch and hydraulic capacity. Like anything mechanical, they have their own unique problems such as with the steering, brakes and shift linkage, but these things are manageable because they don’t cost a lot to repair and result in no down time. I bought all these tractors used, and most if not all the problems they’ve had are due to the previous owner’s neglect or lack of knowledge of the product.

“I’m well pleased with my New Holland hay equipment. When it comes to commercial haying equipment I think New Holland is the best on the market.”

Worst Buy
Robert E. Whitehead, Kiowa, Colo. · Vol. 21, No. 5 (1997), p. 17

A 1995 Ford 9030 bi-directional tractor equipped with a front-end loader heads Robert’s “best buy” list. “It has a 3-pt. hitch, pto, and hydraulic outlets at both ends. It works great equipped with a snowblower on the engine end and a loader on the cab end. The loader is one of the strongest on the market. It has been a dependable tractor. I really like the hydrostatic transmission. “My 1997 Dodge 3500 1-ton 4-WD dually pickup equipped with a Cummins diesel engine is a best buy. It has only about 6,000 miles on it, but already I like its power and fuel efficiency - 20 mpg. “I have a full line of New Holland hay equipment - a 114 Hydraswing windrower, 320 baler, and 1069 bale wagon. When they were new they had some problems which were caused by poor workmanship at the factory. However, the dealer took care of the problems and they all work fine now.”

Best Buy
Wilbert Milleville, Niagara Falls, N.Y. · Vol. 16, No. 2 (1992), p. 14

Wilbert Milleville, Niagara Falls, N.Y.: “We aren’t biased toward any particular brand of machinery but no matter the color of the machine, it must perform without much trouble,” says Wilbert. “We use Deere, Case-IH, and New Holland equipment side by side. We love our Deere 9500 combine and 347 and 348 balers, our two New Holland self-propelled hay stackers, and our Case-IH swing mower-conditioner. “Our 1990 Double Rake Hitch built by Ernest Steiner of Dalton, Ohio is a best buy, We own two of them and use them to pull four New Holland rakes, The hitch lets us make single windrows of any width or switch to double windrows right from the tractor seat. The maneuverability and rugged design make it an excellent buy.”

New Holland haybine

2 Best Buys1 Worst Buy
Best Buy
Lewis A. Durst, Aurora, W. Va. · Vol. 23, No. 2 (1999), p. 16

“My 1950 Allis-Chalmers WD and 1960 Allis-Chalmers D-12 tractors are both best buys. I farmed with them until 1975 when our dealer went out of business. I still own both tractors. They’ve both been overhauled once.

“Since 1975 I’ve been using Deere tractors - a 2030, 2240, 1050 MFWD, 350 dozer, 575 skid steer loader, and 212 and 345 garden tractors. I had to replace a cracked fuel injector on the 2030 five years ago and also replaced a fuel pump on the 2240. The Deere tractors are all best buys, too.

“My New Holland haybine and manure spreader and Fox chopper are best buys. So is my Deere 345 round baler.”

Worst Buy
Lloyd J. Slemon, Bowmanville, Ontario · Vol. 20, No. 5 (1996), p. 16

“Over the years we’ve had good luck with our Deere tractors including a 2130 equipped with a 48 front-end loader, 2750 2-WD equipped with a 148 loader, and 2950 4-WD equipped with a 268 loader. We still use our old Deere 60 and 520 models. We also like our Deere 430 round baler and our New Holland haybine.” On the negative side, “I worked parttime for a local tree nursery driving various types of tractors, and I think the worst tractor I drove was a Case-IH 1390. It was one of the first models the company made after Case and International joined. A lot of little things went wrong on it. It had great traction but continually leaked oil and had poor hydraulics.”

Best Buy
Larry H. Lampe, Hillsboro, Iowa · Vol. 15, No. 1 (1991), p. 13

Larry H. Lampe, Hillsboro, Iowa: “My Yamaha Terra-Pro 350 ATY isa real workhorse. I use itevery day for chores. I’ve also used it to pull an 8-row sprayer over 800 acres. No downtime or repairs.” Roy Westendorff, Pewamo, Mich.; “It has over 12,000 miles and gets about the same gas mileage as advertised,” says Roy, happy with his 1991 Chevrolet S-10 pickup equipped with a 4-cylinder engine, Best & Wo ( can’ tbelieve how many acres iLcan cover in a day.” Maynard's had trouble with a Razor Cat sickle and guards, manufactured by Herschel Mfg. Co., which he installed on his New Holland haybine. “It wouldn't cut brome grass at 3 mph. The sickle pulled so hard that it tore the wobble box and bracket into two pieces. The machine was destroyed because it had unibody construction.”

New Holland disc mower

3 Best Buys0 Worst Buys
Best Buy
Delmar Oetting, Concordia, Mo. · Vol. 34, No. 5 (2010), p. 14

“I like my Deere disc mower, and also the New Holland disc mower I had before I bought the Deere. Kuhn makes both mowers. As long as these mowers are well serviced, they’re a pleasure to operate. On the minus side, if you break something the repairs are expensive.”

Best Buy
Donald Miller, Dongola, Ill. · Vol. 31, No. 6 (2007), p. 15

“My 2006 Vermeer round baler has been trouble-free.

“My New Holland disc mower has also been trouble-free. This is my second New Holland disc mower. I used the other one for 15 years and it required only routine maintenance.”

Best Buy
Terry Richardson, Weston, Mo. · Vol. 26, No. 2 (2002), p. 15

“I’m impressed with my New Holland disc mower. I also had good luck with a previous model.”

New Holland tractors

2 Best Buys1 Worst Buy
Best Buy
James Brashears, Olathe, Kansas · Vol. 42, No. 3 (2018), p. 14

“I love my New Holland BR7070 round baler. This is the fifth New Holland baler I’ve owned, starting with a model 68 small square baler.

“I do wish the company built tractors as well as they build balers. I’ve had two New Holland tractors in the last five years – a T5050 and my current T4.100. Both have been in the shop or been worked on so many times that I’ve lost count. The T5050 had a lot of electrical problems and, at only about 800 hrs., I traded it for the T4.100.

“The T4.100 has about 900 hrs. on it and has had electrical issues with the speedometer, which were finally fixed. There have also been problems with the DEF gauge and the gear shifter. The alternator fell off but was replaced under warranty. After the tractor’s 2-year warranty expired I paid another $900 for an extended power train warranty. Unfortunately, it didn’t cover the gear shifter linkage.

“I think New Holland should stick to building the best balers in the U.S. and forget about building tractors. I’ll never buy another New Holland tractor, even though the company now offers a 5-year warranty.”

Worst Buy
Don Cross, New Castle, Ind. · Vol. 39, No. 5 (2015), p. 13

“My 2010 Bobcat T870 skid loader had some problems, but the dealer promptly took care of them.

“My 2014 Caterpillar mini excavator has about 300 trouble-free hours on it. It’s an excellent machine.”

On the negative side, he lists 3 New Holland tractors, all bought new. “My T8010 model has a transmission fault on the computer screen that no one has been able to fix. The pto shaft literally fell out last fall while I was using the tractor on a grain cart.

“My T7.235 was delivered without working lights. I have to depress the brake pedals all the way to the floor before they’ll work, and if I press on them too hard they make a grinding noise that sounds like metal on metal. The company says this is normal.

“I’ve also had problems with my T5.115 equipped with a self-leveling front-end loader. I couldn’t control the electric-over-hydraulic pilot lever for the loader, which made it dangerous to use. Also, the air conditioner didn’t work. The dealer brought out a T4.95 so that I could mow roadsides. It had only 3 hrs. on it, but at 9 hrs. the pto went out. They ended up replacing the T5.115 with a new one, but it had the same loader and the same problems. The dealer doesn’t get any help from the company.

“Once New Holland gets your money, you’re on your own. I’ve contacted different people in the company, but no one seems to care about my problems. It’s the worst company I’ve ever dealt with. I don’t know how they stay in business.”

Best Buy
George Jordan, Winterport, Maine · Vol. 34, No. 2 (2010), p. 14

“I like my 1999 New Holland 1920 loader tractor. I’ve used it so much that I’ve worn the bucket off the loader, but after 2,700 hours this tractor has been virtually trouble-free. Only the water pump has been replaced.

“My 2004 Boss 9-ft. 2-in. V-snowplow is my worst buy. After one year of use the plow had to be rebuilt, but it still was no good at all. The work was done under warranty, but I never could depend on this plow when it snowed.”

New Holland 114 mower-conditioner

2 Best Buys0 Worst Buys
Best Buy
Alan Sloan, New Boston, TL · Vol. 14, No. 6 (1990), p. 14

Alan Sloan, New Boston, TL: “It has good trash clearance and levels the ground at6 mph,” says Alan, owner of a 1989 CaseTH 496 22-ft. disk. “My worst buy is a 1989 White 5100 6row, 30-in. air planter. raise commercial sweet corn and seed corn so I have to make sure the planter is cleaned out each time change crops. Unfortunately this planter is hard to clean out. The boxes don’t drain out right so I have to remove and clean each plastic plate separately, After owning a Deere Max Emerge planter this one is a big disappointment.” Harlan Huedepohl, Williamsburg, Iowa; “Anyone intending to buy a new Ford tractor, be advised you may have trouble attaching implements to the drawbar. Ford has changed the spacing of the drawbar holes so anyone using a clevis-type hitch is out of luck. I purchased a TW25 and found that! can’t pull my New Holland 114 mower-conditioner or Hesston 10 Stakhand. I have no problem using these implements with my Deere or Deutz tractors.”

Best Buy
Rick Bunnel, Welda, Kan. · Vol. 9, No. 6 (1985), p. 13

Rick Bunnel, Welda, Kan.: His New Holland 114 center pivot swather is both his best and worst buy. “It does a good job of mowing with little vibration. The two 7-ft. sickles are easier to maintain than one 14-ft. sickle. However, it took trips to three dealers before I finally found a needed special center guard. It seems like all parts have to be ordered.” James F. Dougherty, Lake City, “T believe sloppy workmanship is the cause of these problems.” Iowa: ‘I believe sloppy workmanship is the cause of these problems,” says James, disappointed with his Franklin stainless steel 4-drink hog waterer. “It has air leaks which cause it to freeze up unless water temperature-is kept very warm. Also, almost every bolt on the lids has broken and been replaced. “Another worst product is our Rohn round hole farrowing stall feeders. The holes in the feeders aren't big enough for sows to get their heads into. They can't reach the bottom 3 in. of feed. I had to bend the feeders out so they could reach.” On the ‘best buy” side, James had good luck with his Lester farrowing and nursery building. ‘Very well constructed, easy to clean and maintain and very durable. Also, the Shenandoah stainless steel nursery feeders we installed in the building are a good buy. They're easy to adjust, clean and small pigs readily eat from them."

New Holland 1412 discbine

1 Best Buy1 Worst Buy
Worst Buy
John Leininger, Loudenville, Ohio · Vol. 30, No. 1 (2006), p. 15

“My New Holland 1412 discbine is my worst buy. A gearbox went out twice in two years and was very expensive to fix. The dealer was helpful but it still cost me a lot of money and down time.”

Best Buy
Wes Kentch, Ferndale, Wash. · Vol. 25, No. 3 (2001), p. 17

Wesley likes his 2000 New Holland 1412 discbine and 1998 McHale 991 B round bale wrapper. “Both machines have performed flawlessly. We custom mow, bale, and wrap hay and haylage bales. The New Holland discbine cuts fast and clean. Last year we used it to cut more than 300 acres with no problems and on one set of knives. We used the McHale wrapper to wrap more than 500 4-ft. haylage bales from July to November. I highly recommend both machines.

“Our primary farm tractors are 27 years old and still work great. Only one has been overhauled, at less than 10,000 engine hours. My biggest disappointment is the inability to get repair parts for perfectly good older machinery. We’ve had to spend a great deal of time retrofitting or researching used parts that will work.”

New Holland 1431 discbine

1 Best Buy1 Worst Buy
Worst Buy
Ed Basaroba, Fisher Branch, Manitoba · Vol. 31, No. 6 (2007), p. 15

Ed bought a 2003 Kubota M-120 front wheel assist loader tractor used last year and says it’s his “best buy”. “It had 1,163 hours when I bought it.”

In the “worst buy” column, “Last year I bought a used 2005 New Holland 1431 discbine from a Deere dealer. The first week we used it, my wife was cutting hay when the pto fell apart at 2,200 rpm’s. Luckily, no one was standing behind the tractor. I took the machine to a New Holland dealer to complain about the poor factory welding. They told me a field rep would come out to look at it. But I never heard anything and the broken parts disappeared.”

Best Buy
Kenneth R. Murphy, Quarryville, Pa. · Vol. 24, No. 3 (2000), p. 16

“My 1999 New Holland 1431 discbine does everything the dealer said it would. It doesn’t require nearly as much upkeep as our old sicklebar mower equipped with knives and guards.

“My Case-IH 8420 small round baler makes bales that are just the right size for feeding in our stanchion barn. We use a skid steer loader to handle the bales in the field and to stack them in the barn, where we later feed them by hand. We just unroll the bales down a trough in front of the cows.”

New Holland 1465 haybine

2 Best Buys0 Worst Buys
Best Buy
Charles Norman, Pine River, Minn. · Vol. 35, No. 3 (2011), p. 13

“My New Holland 1465 haybine is the best hay conditioner I’ve owned. This is my fourth one. It works right through heavy windrows without plugging up. Also, it pulls easy.”

Best Buy
Harold Triebenbach, Detroit Lakes, Minn. · Vol. 30, No. 5 (2006), p. 14

Harold nominates his 2006 New Holland 1465 haybine as a “best buy”. “It does a good job and is easy to adjust for different field conditions.”

New Holland 195 manure spreader

1 Best Buy1 Worst Buy
Worst Buy
Duane Crandon, Lyons, N.Y. · Vol. 31, No. 3 (2007), p. 14

“I like my 1980 International Harvester 3788 2-WD tractor. It’s extremely versatile, has good traction, and is well balanced.

“My Farmall 1206 is a pleasant tractor to drive. It has a lot of power and is virtually indestructible,

“My New Holland 195 manure spreader is my worst buy. The slats build up with manure in cold weather and don’t clear the underside. This manure spreader was designed for the kind of climate they have in Bermuda.”

Best Buy
E. Claggett, Frazeysburg, Ohio · Vol. 27, No. 2 (2003), p. 13

“My New Holland 195 manure spreader spreads manure evenly and is my best buy.

“My Bobcat skid steer loader is my worst buy. It’s equipped with advanced hand controls and we’ve had several electrical problems with them.”

Worst Buy
Dale Garner, Vincennes, Ind. · Vol. 29, No. 2 (2005), p. 15

“My 2003 Featherlite 4-horse gooseneck trailer is well built. The company built it to my specs, and they were happy to add any convenience that I wanted. I had living quarters added onto it by Showtime Conversions of Middlebury, Ind. This trailer is built entirely of lightweight aluminum so my Chevy 3/4-ton crew cab pickup has no trouble pulling it.

“My New Holland 254 combination rake/tedder is my worst buy. The ground wheels aren’t built sturdy enough for the weight of the implement. It does a poor job of tedding hay, with no uniformity. It takes two people to hook the implement up to my tractor, and I have to almost lay on the ground to operate the levers so I can switch from tedding to raking. I’ll never buy another one.”

Worst Buy
Dusty Rhodes, Dayton, Va. · Vol. 22, No. 6 (1998), p. 16

“It has a lot of power, handles and looks good, and has a cab that’s easy to get in and out of,” says Dusty about his “best buy” 1999 Ford F-250 pickup.

His “worst buy” is his New Holland 254 rake-tedder. “It isn’t built with quality. The grease zerks pop out, wheel bearings break out, and the jack stand is wobbly. It’s made cheap and is a disgrace to the company name.”

New Holland 258

2 Best Buys0 Worst Buys
Best Buy
C.J. Phillips, Bluemont, Va. · Vol. 24, No. 6 (2000), p. 16

“My 1998 Worksaver post driver is built much stronger than the Shaver drivers I’ve used in the past. The company was helpful with a couple of problems I had with it.

“My Shaver post driver is my worst buy. I had problems with the hydraulic leveling part of the driver but got absolutely no support or help from the company. When the problems couldn’t be solved I finally traded it in for the Worksaver.

“MyDeere 6400 4-WD tractor and Deere 466 round baler are both best buys.

“MyNew Holland 258 and 260 hay rakes and the Ellerbe double rake hitch I use to pull them are all best buys. They’re real time savers.

“MyNew Holland 617 disc mower works great. I don’t think I’ll ever go back to a sicklebar mower.”

Best Buy
Round Hill, Virg. · Vol. 10, No. 1 (1986), p. 14

Round Hill, Virg.: ‘When the machine was delivered the solid rubber tires were split wide open. It was also assembled poorly, First one tire and wheel fell off, then the whole axle assembly came off. When the machine dropped down and dug into the ground, the pto shaft bent. At this point, it had not been in use more than 15 hrs. The company said they'd take it back and go over it completely, When it was returned, they'd replaced the bent arm and pto shaft but all the teeth and retaining pins were installed wrong,” says Robert, unhappy with his ‘worst buy’’ Lely Gemini Hay Saver ptodriven rake tedder. He traded the tedder in on his “‘best buy" New Holland 258 hay rake. “Just one nut worked loose the entire season,”

New Holland 269 small square baler

2 Best Buys0 Worst Buys
Best Buy
Paul Russell, Walnut Shade, Mo. · Vol. 38, No. 1 (2014), p. 12

“The New Holland 269 small square baler I bought used is pretty old, although I don’t know exactly how old. When I got the baler I made a few repairs and cleaned it up. It hardly ever misses a tie.”

Best Buy
Clair Gelser, Hunt, N.Y. · Vol. 17, No. 6 (1993), p. 14

Clair Gelser, Hunt, N.Y.: Clair’s the owner of a “best buy” New Holland 269 baler equipped with a thrower. “Last spring I retired my ‘old faithful’ New Holland 66 baler and bought the 269 model used at an auction, It has performed perfectly. During one period last summer it missed ticing only four bales out of more than 1,500.” Bob Brekke, Nielsville, Minn.; “I like my 1993 Chevrolet turbocharged diesel pickup. I traded in a 1982 GMC pickup equipped with a 6.2-liter diesel engine that had 223,000 miles on it but still ran like new. The only problem I ever had was starter failures.”

Worst Buy
Allan Beatty, Richland Center, Wis · Vol. 19, No. 2 (1995), p. 15

Allan Beatty, Richland Center, Wis.: Allen's disappointed with his New Holland 310 baler. “The first year I had to replace bearings and belts, After that, repairs got more expensive. I understand they’ve improved this baler. But for the same money I could have bought a Deere 336 baler and saved myself all the headaches.”

Best Buy
Gerry Schuster, Sun Prairie, Wis. · Vol. 17, No. 4 (1993), p. 16

Gerry Schuster, Sun Prairie, Wis.: Gerald owns a Deutz-Allis GP 220 round baler. “It's a low maintenance machine and I’m satisfied with it. However, ithas trouble with dry straw, grass hay, orcorn stalks. The rollers have grit in the paint which wears off with use. We plan to weld rolled pieces of expanded metal onto the rollers to improve their grip. “Our New Holland 310 small square baler works well.”

New Holland 326

2 Best Buys0 Worst Buys
Best Buy
Daniel Farrand, Long Valley, N.J. · Vol. 12, No. 4 (1988), p. 14

Daniel Farrand, Long Valley, N.J.: "Our New Holland 326 baler handles the biggest of windrows with ease - it's almost impossible to break a shear pin. We can bale a gear higher than with our old baler in almost all conditions. The only problem is that the kicker needs a bit more power. "My worst buy over the past few years is an International 986 tractor. It rides very rough and is clumsy to drive. Everything is out of place for servicing. The starter went bad twice within a year as well as the pto. You even have to look in a mirror to see the drawbar to hook up."

Best Buy
Phillip D. Prickett, Mt. Holly, N.J. · Vol. 10, No. 6 (1986), p. 14

Phillip D. Prickett, Mt. Holly, N.J.: “Our 1986 New Holland 326 baler has good capacity especially since they changed the flow action back to the old chain style. Makes it much more reliable. Teamed up with a 1037 balewagon, and good weather, you can really get hay into the barn.”

New Holland 35 hp tractor

2 Best Buys0 Worst Buys
Best Buy
Floyd Rutherford, Belfry, Ky. · Vol. 38, No. 3 (2014), p. 14

“A few years ago we bought a New Holland 35 hp. tractor. Lately we’ve added various attachments including a tiller, bush hog, and post hole auger and they all work perfect.”

Best Buy
Doyle C. Scott, Hoagland, Ind. · Vol. 29, No. 3 (2005), p. 14

“I use my 1970 New Holland 35 skid loader every day of the year. We load heavy bales, scoop manure, and clean free-stall barns twice a day. I have another model 35 that I use primarily to move logs and lumber out of our sawmill building. I’d never buy another brand.”

New Holland 358 mix mill

0 Best Buys2 Worst Buys
Worst Buy
Mike Bailey, Saint John, Wa · Vol. 19, No. 3 (1995), p. 15

Mike Bailey, Saint John, Wa.: Mike's unhappy with his New Holland 358 grinder/mixer. “The hand crank on that raises or lowers the unloading auger is a man killer. It has a lock inside to release the auger. There’s just enough room to get your finger inside to release the lock to let the auger down, Everyone who has used this machine at one time or another has had the lock fail to latch, causing the auger to slam down and either hit the operator in the face or bruise his fingers as the crank spins around.”

Worst Buy
Harold Weppler, Morse, Sask. · Vol. 15, No. 4 (1991), p. 13

Harold Weppler, Morse, Sask.: “It makes the best round bales on the market,” says Harold, owner of a 1988 Deere 430 round baler. “It’s simple to operate and requires little maintenance. “My 1984 Deere 7721 pull-type combine is also a best buy. It does a good job, is easy to adjust, has lots of capacity, and holds its value.” On the negative side, “The feeder chains on my 1989 New Holland 358 mix mill were installed backward. The mill's engage pin sometimes flies out under a load. The dealer couldn't fix it. Ever since Ford took over New Holland the quality has been poor. “My 1986 Case-IH 5600 cultivator is also a worst buy. Two sets of shanks had to be replaced and the wing lift binded and fell down, bending the axle. The wing lift holdup tower tore out of the frame and left hoses dragging. The walking beam axles had to be rebuilt twice.”

New Holland 41

2 Best Buys0 Worst Buys
Best Buy
Michael Rush, Deville, La. · Vol. 13, No. 4 (1989), p. 14

Michael Rush, Deville, La.: “There's no other machine in its class,” reports Michael,acommercial hay cutter who’s pleased with his 1987 New Holland 41 1 disc mowerconditioner. “My 411 cuts hay so easily my wife can use it. I'm well satisfied with its performance.”

Best Buy
Gerald Wick, Toivola, Minn. · Vol. 13, No. 2 (1989), p. 13

Gerald Wick, Toivola, Minn.: Gerald likes his 1988 New Holland 41 1 disc mower. “I'll cut through anything - the heavier the crop, the better. It’s far superior to any sickle bar mower conditioner.”

New Holland 4-105 tractor

1 Best Buy1 Worst Buy
Worst Buy
James Swanson, Russell, Penn. · Vol. 42, No. 4 (2018), p. 15

A New Holland 4-105 tractor purchased new rates as James’s “worst buy”. “I had used the tractor for only about 4 hrs. when the rear end went out because the factory didn’t install the main pin for the main gear. It tore the rear end all up. It took three weeks to fix, and then after a few days the pto clutch went out because there were steel filings in the clutch.

“After the dealer fixed the tractor I tried using it to mow hay, but I was able to go around the field only 1 1/2 times before the pto went out again. This time they gave me a loaner tractor to use while mine was in the shop for more than two weeks. The mechanic told me I could expect problems with this tractor for as long as I owned it. I told the dealer I wanted a new tractor, but the company refused and the dealer wouldn’t help. They wanted me to pay $7,500 to have the tractor replaced. In the end I paid $3,250.”

Best Buy
James L. Swanson, Russell, Penn. · Vol. 40, No. 2 (2016), p. 14

“I bought a New Holland 4105 tractor in December 2014. Just before Christmas the dealer had the tractor in stock but not the loader, so he ordered it from the company. However, it took 3 months to get the loader in and for the tractor to be delivered.

“With less than 10 hrs. on the tractor the transmission went out, apparently because the factory hadn’t installed the pin to hold the gears in the transmission. The gears got torn up badly and the tractor was in the shop for a month.

“At about 50 hrs. the pto went out because of shavings and pieces that were left behind when the transmission went out. It took two weeks to get the pto fixed and to get the tractor back. But when I went out one day to mow hay with my discbine, the pto went out again and was in the shop for more than a week. The dealer agreed that the company should replace the tractor, but they refused.

“Finally in August the company said they would replace the tractor by October or November. But December came and I still hadn’t heard anything so I went back to the dealer. However, now he said the company wouldn’t replace the tractor unless I paid them $7,500.

“I’ll never buy another tractor from this company. They don’t treat their customers fairly.”

New Holland 415 discbine

0 Best Buys2 Worst Buys
Worst Buy
Gary Anderson, Bowden, Alberta · Vol. 27, No. 1 (2003), p. 14

In 1983, Gary bought a 1980 Deere 4440 tractor used with 1,200 hours on it. “This tractor now has almost 8,000 hours on it but has required only minimal repairs, and the engine still doesn’t use a drop of oil. Even though I do a lot of loader work with this tractor it still has the original clutch. Looks and performs like new.

“My 1993 New Holland 415 discbine is my worst buy. It worked well for two years, covering a total of about 700 acres. Then the same splines in the transmission gearbox sheared off. We got it fixed and two hundred acres later the same problem happened again. The machine was still under warranty so the company paid for it again. One hundred acres later the same shaft failed a third time. Every time this problem happened we lost about a week of downtime. We finally traded the machine in for a Deere 935 discbine, which has worked a total of about 3,000 acres and still works perfectly.”

Worst Buy
Ken Brown, Harrison, Mich. · Vol. 21, No. 3 (1997), p. 12

“My worst buy is my 1992 New Holland 415 discbine. The constant velocity pto shafts wore out while the machine was still under warranty and two more times after the warranty had expired. The problem is that the pto shafts don’t have enough surface resistance and wear quickly. Another problem was that the cutterbar’s flotation springs broke. Also, when a disc hits a stone the weakest link is usually an expensive gear, which breaks.”

New Holland 420

2 Best Buys0 Worst Buys
Best Buy
Leon Seahorn, Jefferson City, Tenn. · Vol. 8, No. 2 (1984), p. 12

Leon Seahorn, Jefferson City, Tenn.: Leon lists his New Holland 420 baler as "best buy". "It's an ex- cellent piece of equipment. Haven't had any problems in any way."

Best Buy
George Ehmke, Grover, Colo. · Vol. 8, No. 1 (1984), p. 10

George Ehmke, Grover, Colo.: “This baler was junk,” says George, about his “worst buy’ Hesston 4600 baler. “It wasn't set up right at the factory. The timing was all messed up, it missed a lot of ties, and it was hard on tractors. I don't think the flywheel was heavy enough. We also had a hard time getting parts replaced.” On the plus side, he’s pleased with his New Holland 420 baler. ‘‘We traded for the baler this spring and have had no trouble at all with it. The bales are all very uniform and the hydraulic tension is really good. We also have a New Holland 282 baler that has worked well.”

New Holland 460 round baler

1 Best Buy2 Worst Buys
Best BuyWorst Buy
Bunkie Smith, Philadelphia, Miss. · Vol. 45, No. 3 (2021), p. 13

“My Danuser Hammer LM40 post driver can pound an 8-in. post into the ground with no problem. My Texas Fence Fixer works good and can tighten almost any kind of fence wire.”

On the “worst buy” side, “I could seldom make 20 bales with my New Holland 460 round baler before something on it would go wrong. The dealer gave me a new baler while he spent almost an entire season working on mine. The problem turned out to be a wire harness that connects to a computer. I think too much technology is built into today’s balers. However, I’m happy with this baler now.”

Worst Buy
Bunkie Smith, Philadelphia, Miss. · Vol. 43, No. 1 (2019), p. 14

Bunkie likes his Streamlight MicroStream mini LED flashlight (www.streamlight.com). It runs on one AAA battery and is just 3 1/2 in. long, making it small enough to fit in the palm of your hand. It comes with a removable pocket clip so you can put the light in your pocket or clip it to the brim of your hat.

He also likes his GMC 2500 3/4-ton diesel pickup equipped with an Allison transmission; Kubota 8540 and 108X tractors; Krone 10 1/2-ft. pull-type mower; and Kubota X11200 utility vehicle.

He’s had electrical and computer problems with his 2017 New Holland 460 round baler. “My dealer had to work on this baler every time I tried to use it. He finally replaced it with a newer 2018 460 model. No problems.”

New Holland 463 disc mower

2 Best Buys0 Worst Buys
Best Buy
Jim Horn, Seymour, Mo. · Vol. 27, No. 1 (2003), p. 13

“My White 2-75 is a great mower tractor. It has about 4,000 hours on it but it still starts great in cold weather and is fuel efficient.

“I didn’t know it at the time, but the New Holland 463 disc mower I bought new in 1991 was really a Kuhn mower with red paint on it. This mower didn’t cut hay, it just stripped the field. Neither my dealer nor the factory reps would do anything about it. I finally traded it in for a new Kuhn disc mower that works great.”

Best Buy
Dave Delabar, Wheelersburg, Ohio · Vol. 15, No. 5 (1991), p. 14

Dave Delabar, Wheelersburg, Ohio: “It mows cleaner at higher speeds than any mower or haybine I’ve ever used,” reports Dave, satisfied with his 1989 New Holland 463 disc mower. “No broken sections or guards and no problems with plugging. We ie al rst Buys revious page) use it in hay and to clip pastures and mow fencelines. We're building a hitch to pull a rotary tedder behind the disc mower.”

New Holland 472 haybine

2 Best Buys0 Worst Buys
Best Buy
Dolphus Taylor, Waynesburg, Ky. · Vol. 32, No. 5 (2008), p. 12

“My 1983 New Holland 472 haybine works good and has been almost maintenance-free.

“My 1983 Claas 44-S round baler works good. I paid less than $500 for it. I use both the haybine and baler to make 700 to 800 bales per year.”

Best Buy
John Cruthis, Brinkley, Arkansas · Vol. 11, No. 2 (1987), p. 12

John Cruthis, Brinkley, Arkansas: "One of my best buys has been a 1984 2-180 White tractor. I bought it last winter with 1,250 hrs, and have only replaced an alternator and two batteries." Sam Hubbard, Wellsburg, West Virginia: Sam's disappointed with his 4525 Rockwell circular saw. "It worked okay for awhile and then started to make a loud noise when it died down. I adjusted the brushes a few times to keep it going. What bothers me most is that they no longer make brush holders for the saw Te 1inate sUYS and it's only 3 years old." As "best buy" Sam cites his 1986 New Holland 472 Haybine, "I'm happy with its performance, leaf retention, ease of operation and excellent design over other mower-conditioners."

New Holland 488 haybine

1 Best Buy1 Worst Buy
Worst Buy
John Turchet, Stauffer, Alberta · Vol. 21, No. 3 (1997), p. 13

“My 1994New Holland 488 haybine is my worst buy. It’s the second haybine I’ve bought from the company. The first one is 17 years old and I still use it. It was a great machine and so naturally we bought another one. However, this one has needed new idler sprockets, a new wobble box, and worst of all, a new conditioning roll. The original one broke after only 300 acres. The dealer was great and after much fighting the company finally agreed to pay for a new roll. I wouldn’t have been so upset if the company had used quality parts to begin with, but many of the parts were junk. The conditioning rolls were defective, and it’s been a problem on other machines in our area. The company should have admitted the problem and paid for the repair cost without question. It’ll be a long time before I’ll buy from them again.”

Best Buy
Harland Cederberg, Galva, Ill.. · Vol. 16, No. 5 (1992), p. 13

Harland Cederberg, Galva, Ill..: “One of the best buys I made in the past year was my New Holland 488 haybine. It cuts right through even the heaviest hay. Has caused very little trouble. “On the worst buy side is our Lundell shredder which I bought several years ago. I've spent more time working on it than “J've spent more time working on it than using it.” using it. Something goes wrong with it every time we go to the field.” Roger Jones, Granby, Conn.; “My 1991 Forage King Hay Basket is my best buy. It loads 100 bales with no problems and unloads them in 30 seconds. We own two Hay Baskets. We use a 1-ton pickup to pull one to the barn while we fill the other one behind the baler. We paid $2,500 apiece. We're well pleased with them. “We're also happy with our 1985 Same 4-WD tractor and loader, It has 3,000 hours. The 85 hp engine is air cooled. We use the tractor for heavy loader work, No problems.”

New Holland 5070 loader tractor

2 Best Buys0 Worst Buys
Best Buy
Bob Andes, Parshall, N. Dak. · Vol. 37, No. 3 (2013), p. 12

“My New Holland 5070 loader tractor is a good unit in most ways but has a jerky hydraulic clutch. Also, the air cleaner filter can’t be cleaned, yet one afternoon of baling can plug it. At $40 apiece to replace, it’s a bad deal. The air cleaner should be redesigned.”

Best Buy
A.T. Smith, Hindsville, Ark. · Vol. 37, No. 1 (2013), p. 13

“My Deere 458 round baler equipped with net wrap makes perfect bales every time.

“My New Holland 5070 small square balers eat hay better than any other baler I know of.”

New Holland 520 manure spreader

2 Best Buys0 Worst Buys
Best Buy
Dale Piel, Red Bud, Ill. · Vol. 20, No. 1 (1996), p. 15

“My 1992 New Holland 520 manure spreader runs smooth and quiet. In fact, I can’t even hear it running. It also does a good job of spreading. The controls are easy to operate. The hydraulic-operated endgate is also easy to operate and keeps liquid manure inside the machine. The fiberglass floor doesn’t freeze in cold weather and is easy to clean. I’m well pleased with it. “My 1993 Wagner 230 9-piece power painter is also a best buy. It doesn’t require an air compressor. All that’s needed is an extension cord. As long as the paint is thinned correctly it does a professional job. It’s easy to use and lightweight. “I’m disappointed with my 1993 S & H 16-ft. gooseneck trailer. Three months after I bought it two floorboards rotted out. The company replaced them at no charge. Ten months later nine more floorboards rotted out.”

Best Buy
Charles W. Rittmeyer, Winnebago, Ill. · Vol. 19, No. 1 (1995), p. 16

Charles W.Rittmeyer, Winnebago, IIL: A New Holland 520 manure spreader rates as Charles's "best buy". "We bought the spreader at a farm sale. It was about one year old, It does a good job with soupy manure. The only problem we had was with a flat tire. The apron came off one time, but that was our fault beause we let it get too much slack in it.”

New Holland 5610S tractor

1 Best Buy1 Worst Buy
Best Buy
Thomas Finch, Mt. Sterling, Ky. · Vol. 50, No. 1 (2026), p. 14

Thomas has two best buy tractors. One is a 1989 Ford 5610 Series II with a Bush Hog quick-attach loader. The other is a 1998 New Holland 5610S with a quick-attach loader. “Both tractors are easy to operate and have done every job I’ve wanted to do.”

Worst Buy
James C. Coates, Marshall, N.C. · Vol. 26, No. 2 (2002), p. 16

“My 2000 New Holland 5610S tractor is my worst buy. After 20 hours the electric fuel pump shorted out. It was repaired, but now it uses twice as much fuel. It also wouldn’t work properly in warm weather. The tractor had been sitting so long at the dealer that the clutch was stuck. They replaced the pressure plate and clutch but it still doesn’t shift right. I’ve already put four quarts of oil into the engine even though it has only 50 hours of use. It also leaks hydraulic oil and power steering fluid underneath. The tires have a lot of dry cracks in them. They wanted $8,000 to trade for a new smaller tractor. I’ll never buy a New Holland product again.”

New Holland 565 skid loader

2 Best Buys0 Worst Buys
Best Buy
Bud Vogelzang, Sioux Center, Iowa · Vol. 43, No. 4 (2019), p. 13

“I bought my New Holland 565 skid loader several years ago with more than 5,000 hrs. on it. I don’t use this machine hard, but it has been trouble-free and is easy to operate.”

He’s had problems with the 2011 New Holland C232 track skid loader he bought used with about 2,000 hrs. on it. “A hydraulic hose blew and the machine had to be hauled back to the dealer for repairs. They found other problems, too, so my total bill came to $4,754. Then after only 2 more hours of use, electronic problems developed and the loader had to be hauled in again. This time the repair bill was $3,445. Part of the problem was trying to repair a 2011 skid steer with 2018 electronics repair software.”

Best Buy
Henry L. Bradbury, Clackamas, Ore. · Vol. 20, No. 3 (1996), p. 14

“My 1994 New Holland 565 baler has been trouble-free. The only time it doesn’t tie is when the twine runs out. It can make bales from 20 to 100 lbs.” On the negative side, “My 1993 Ford F-250 4-WD pickup equipped with a diesel engine and automatic transmission has been back to the dealer numerous times. The front alignment never has worked right. The brakes froze up and there are problems with the rear anti-lock brakes. It needed new fuel injectors at 25,000 miles. My wife calls this pickup my white lemon.”

New Holland 617 disc mower

1 Best Buy1 Worst Buy
Worst Buy
Mike Schmidt, Durham, Mo. · Vol. 32, No. 2 (2008), p. 14

“Our 2003 New Holland 617 disc mower is our worst buy ever. The first time we used it, one end of the machine fell apart and came through the canvas. Also, there was no oil in the gearbox so it had to be rebuilt. Then a bearing in the gearbox went out. Later, the power shaft broke even though the machine hasn’t even cut 400 acres yet. We had the powershaft repaired at a local shop because our dealer no longer wants to see this machine.

“The operator’s manual doesn’t include any phone numbers for the company. The manual just says to see your dealer, and when you get the phone number from the dealer and call the company, they tell you to see your dealer. This disc mower has spent more time at the dealer than it has in the field. Now I won’t even give this machine shed room.”

Best Buy
C.J. Phillips, Bluemont, Va. · Vol. 24, No. 6 (2000), p. 16

“My 1998 Worksaver post driver is built much stronger than the Shaver drivers I’ve used in the past. The company was helpful with a couple of problems I had with it.

“My Shaver post driver is my worst buy. I had problems with the hydraulic leveling part of the driver but got absolutely no support or help from the company. When the problems couldn’t be solved I finally traded it in for the Worksaver.

“MyDeere 6400 4-WD tractor and Deere 466 round baler are both best buys.

“MyNew Holland 258 and 260 hay rakes and the Ellerbe double rake hitch I use to pull them are all best buys. They’re real time savers.

“MyNew Holland 617 disc mower works great. I don’t think I’ll ever go back to a sicklebar mower.”

Best Buy
Roman Schroeder, Washington, Mo. · Vol. 21, No. 4 (1997), p. 16

“I like my 1996 New Holland 654 round baler equipped with the silage bale kit. Except for a few minor problems it’s been trouble-free. The knob for adjusting bale density fell off

Best Buy
Roman Schroeder, Washington, Mo. · Vol. 21, No. 3 (1997), p. 12

“I like my 1996 New Holland 654 round baler equipped with the silage bale kit. Except for a few minor problems it’s been trouble-free. The knob for adjusting bale density fell off somewhere in one of my fields last year and the company won’t replace it. “I’m disappointed with my 1995 GMX magnetic water conditioning system. It uses magnets that clamp to the water pipes and are supposed to prevent lime buildup in the water heater and water lines. However, it didn’t work. I would have got the same result if I’d just taped some cow magnets to my water lines.”

New Holland 680 manure spreader

2 Best Buys0 Worst Buys
Best Buy
Edwin H. Rissler, New Enterprise, Penn. · Vol. 20, No. 4 (1996), p. 15

“We bought our 1972 Ford 4000 tractor used and it now has over 5,000 hours on it. It’s still a solid tractor with very few problems. We converted both our 4000 and 7600 Ford tractors to hydrostatic power steering which we find a lot more satisfying than the original power steering system. “Our New Holland 680 manure spreader works great.”

Best Buy
Peter Witzel, Elora, Ontario · Vol. 16, No. 5 (1992), p. 13

Peter Witzel, Elora, Ontario: “This machine is absolutely flawless,” says Peter, owner of a “best buy” 1989 New Holland 680 manure spreader equipped with an end gate and slurry sides. “We use it to spread manure on about 200 acres per year at a rate of about 30 tons per acre, The slurry sides work great for liquid manure. This spreader definitely is quality engineered.”

New Holland 718

2 Best Buys0 Worst Buys
Best Buy
Eugene Frodl, Whitewater, Wis. · Vol. 8, No. 2 (1984), p. 12

Eugene Frodl, Whitewater, Wis.: Heading his ‘‘best buy’ list is his Menard 54 by 90-ft. pole building. “It's really built well. All the doors open and close with no binding. The building crew knew what they were doing. The salesman called back after it was up to seé if was satisfied." Also on the plus side, Eugene likes his New Holland 718 field harvester. “I've had no breakdowns with it in the second year of use and I like the 722 cornhead. The length of cut is easy to change.”

Best Buy
E. Fechner, Chelmsford, Ontario · Vol. 8, No. 2 (1984), p. 12

feeder are very ellective against horn flies, face flies and lice.” Eugene Frodl, Whitewater, Wis.: Heading his ‘‘best buy’ list is his Menard 54 by 90-ft. pole building. “It's really built well. All the doors open and close with no binding. The building crew knew what they were doing. The salesman called back after it was up to seé if was satisfied." Also on the plus side, Eugene likes his New Holland 718 field harvester. “I've had no breakdowns with it in the second year of use and I like the 722 cornhead. The length of cut is easy to change.”

New Holland 7320 discbine

2 Best Buys0 Worst Buys
Best Buy
Ricky L. Kirkpatrick, Cottontown, Tenn. · Vol. 39, No. 4 (2015), p. 14

“My New Holland 7320 discbine is the best hay cutting machine I’ve ever used. It pulls easy and has no problems in thick-matted grass hay. Any hay I cut in the morning will be wilted by noon. The hay is still in great shape when I feed it to my cattle the following winter.”

Best Buy
Ricky L. Kirkpatrick, Cottontown, Tenn. · Vol. 37, No. 3 (2013), p. 14

“My New Holland 7320 discbine pulls easy and does an excellent job in rank hay. The hay dries down well, and cattle really love the feed.”

New Holland 846 round baler

2 Best Buys0 Worst Buys
Best Buy
Daniel L. Snyder, Gettysburg, Penn. · Vol. 20, No. 3 (1996), p. 15

Daniel likes his 1982 White 2-65 4-WD tractor. “I had to put in a new clutch. No other problems.” “I like my New Holland 846 round baler which I bought used. I’ve used it to make about 2,800 bales with just one bearing replacement.”

Best Buy
Robert K. Church, Centerview, Mo. · Vol. 11, No. 6 (1987), p. 13

Robert K. Church, Centerview, Mo.: He's pleased with his 1985 New Holland 846 baler. “It's fast and easy to operate. Trouble-free operation and no problem getting bales started.”

New Holland 849 round baler

1 Best Buy1 Worst Buy
Worst Buy
Dennis Cowden, McDonald, Penn. · Vol. 18, No. 4 (1994), p. 15

Dennis Cowden, McDonald, Penn.: Dennis is disappointed with his New Holland 849 round baler. “The twine cutter needs to be adjusted constantly and even when it’s adjusted right it still doesn’t perform adequately. Shear pins break constantly whenever the baler is raised to eject the bale.”

Best Buy
Ernie Leyburn, Arran, Sask. · Vol. 17, No. 5 (1993), p. 14

Ernie Leyburn, Arran, Sask.: “It's a very low maintenance baler,” says Emie, pleased with his 1983 New Holland 849 round baler. “We've used it o make several thousand trouble-free bales. Truckers like the small bales because they squeeze together nicely on a lowbed trailer, making them easy to haul for long distances.”

New Holland 850 round baler

1 Best Buy1 Worst Buy
Best Buy
John Leidenix, McLaughlin, S. Dak · Vol. 19, No. 1 (1995), p. 14

John Leidenix, McLaughlin, S. Dak.: “I traded my trouble-free New Holland 850 baler in for a New Holland 853 baler that sold for $17,500, It didn’t cut the twine properly right from the start, and the pickup sheared a pin for every bale made. The bale command controls don’t work right. I spent $1,300 for a new alternator, new batteries, and rewiring but it didn’t help. The problem is that the computer won't hold what's programmed into it. The dealer can’t fix it and won't replace it. He blamed the dust, the hay, and the operator, but never the baler. The only way I can bale is to override the computer.”

Worst Buy
Barry H. Dee, Sedgwick, Colo. · Vol. 17, No. 5 (1993), p. 16

Barry H. Dee, Sedgwick, Colo.: Barry mounted his “best buy” Ficklin 4500 gravity wagon box on an old military 6-WD truck (209 West Grant, Onarga, Ill.. 60955). “This grain drill has lived up to our highest expectations.” “We bought it because we needed additional grain-hauling capacity at wheat harvest. The box is slip-coated, and the side unload door can be adjusted precisely for unloading grain into an auger. There's no need to back up or raise a hoist, It’s a beautiful piece of equipment. “I purchased my worst buy New Holland 850 round baler a number of years ago. When first got it, I thought it was the most frustrating piece of junk I ever bought. If you got more than one bale out of 20 made without plugging, you were doing good, I asked dealer after dealer what was wrong, but no one could help. Finally I used a factory service phone number in the operator’s manual to call company headquarters. I was told to move a small block that the tension cable rides on, Now the baler is one of the best tools on my farm. I don’t know the name of the factory rep who helped me, but I want to thank him. I wish Deere had a factory service phone number in its operating manuals.”

New Holland 852 round baler

1 Best Buy1 Worst Buy
Best Buy
Otis A. Ueckert, Bellville, Texas · Vol. 16, No. 5 (1992), p. 13

Otis A. Ueckert, Bellville, Texas: Otis has had good luck with his New Holland 852 round baler. “I bought it used for about one fifth the price of a new 855 model. I’ve made 543 bales with it while spending less than $100 on repairs. “My 1985 Ford 6710 tractor is equipped witha 777F front-end loader. I paid $26,500 for the tractor. I like it fine except that the front wheel bearings failed. They were made by Toyota in Japan. The dealer didn’t have them in stock so I had to buy them at NAPA Auto parts. Think of it - installing car parts on a tractor equipped with a loader. When thebearings wentout again I ruined a spindle, I'm switching to Timkin bearings because they’re made in the U.S.A.”

Worst Buy
Jay Burton, Claresholm, Alberta · Vol. 11, No. 2 (1987), p. 13

Jay Burton, Claresholm, Alberta: "My 1986 Deere 530 round baler works fantastic. I baled 2,000 bales with it this season and every one was perfect. No breakdowns and the Bale Trak monitor makes an even-size bale every time. Requires less power than previous round balers I've had. Bales are tight and a ee TT "T baled 2,000 bales with it this season and every one was perfect." weathe well. "My worst buy is a 1982 New Holland 852 round baler. It made poor bales, cut the twine in short lengths, and the bales were loose and almost impossible to feed. Dealer and factory reps tried unsuccessfully to make it work for 3 years. I finally gave up."

New Holland 890EN2

2 Best Buys0 Worst Buys
Best Buy
John Nye, Washington Depot, Connecticut · Vol. 11, No. 2 (1987), p. 14

John Nye, Washington Depot, Connecticut: "Our Deere 4250 and 2350 tractors with MFWD are best buys. The 4250 has a powershift transmission which is simple to operate. The 2350 has a 245 loader which works nice, but has cost the company a lot of money to fix. "We also like our New Holland 890EN2 com snapper head. It works well snapping ear corn and grinding it up but it's too bad New Holland hasn't made some improvements. With some simple modifications, it could be made to do a cleaner job with less trash. "Our 1985 Dodge D-250 tuck with 318 V-8 engine and automatic transmission drives nice, but gets 8 n.>g and can't pull a cattle trailer nearly as well as our 1977 Dodge D-150 with a 318 engine." As "worst buy" he names Delayal 08 Super Liner milking machine inflations. "We started using them 1 year ago. They stayed on better than the old 01's did. However, it took us a long time to figure out what was causing a 2,500 lb. herd average drop, mastitis problems, and hard milking cows. We did extensive testing for stray voltage, feed analyses, worms, feet problems, milking system checks, etc. When we went back to the 01 liners we got a 5 Ib/cow milk increase immediately and milking speed and mastitis are improving rapidly."

Best Buy
Washington Depot, Connecticut · Vol. 11, No. 2 (1987), p. 14

Washington Depot, Connecticut: "Our Deere 4250 and 2350 tractors with MFWD are best buys. The 4250 has a powershift transmission which is simple to operate. The 2350 has a 245 loader which works nice, but has cost the company a lot of money to fix. "We also like our New Holland 890EN2 com snapper head. It works well snapping ear corn and grinding it up but it's too bad New Holland hasn't made some improvements. With some simple modifications, it could be made to do a cleaner job with less trash. "Our 1985 Dodge D-250 tuck with 318 V-8 engine and automatic transmission drives nice, but gets 8 n.>g and can't pull a cattle trailer nearly as well as our 1977 Dodge D-150 with a 318 engine." As "worst buy" he names Delayal 08 Super Liner milking machine inflations. "We started using them 1 year ago. They stayed on better than the old 01's did. However, it took us a long time to figure out what was causing a 2,500 lb. herd average drop, mastitis problems, and hard milking cows. We did extensive testing for stray voltage, feed analyses, worms, feet problems, milking system checks, etc. When we went back to the 01 liners we got a 5 Ib/cow milk increase immediately and milking speed and mastitis are improving rapidly."

Best Buy
Francis Henderson, Brinston, Ontario · Vol. 34, No. 4 (2010), p. 15

Francis is impressed with his 2008 New Holland BB940 big square baler. “We can bale hay fast with it once the hay is ready to bale. We also own a Kuhn 7822 25-ft. hay rake that saves time and is simple to operate. Because it’s so wide we can go slower and save a lot of leaves.

“My Great Plains 1205NT 12-ft., no-till grain drill plants 12 ft. wide, but the tires on the outside of the drill make it over 15 ft. wide. If the tires were located behind the drill and in the center, we could plant 15 ft. wide instead of 12 ft. Also, the coulters aren’t spaced right and plug up easily in corn stalks or loose ground.”

Worst Buy
James E. Baltzly, Beach City, Ohio · Vol. 30, No. 6 (2006), p. 13

“I like my Dodge 1-ton pickup equipped with a diesel engine. This is my second Dodge diesel and it’s a great truck. I use it for general farm work and for pulling my trailers.

“My New Holland BB 940 baler has caused nothing but problems from day one and is my worst buy. The knotters don’t tie right. The dealer has adjusted and readjusted them, yet they still don’t work right. The slip clutch on the flywheel has been replaced twice because it’s too small. A company rep told me he has never heard of a problem like mine.

“I’d think a company as old as New Holland would work with a customer until a problem is corrected. Last summer I had to pay $6,500 out of my own pocket for repairs and labor to get this baler working, which I think the company should make right with me. I won’t buy another New Holland product again.”

New Holland BR740 round baler

1 Best Buy1 Worst Buy
Worst Buy
Wesley J. Bradley, Thornton, W. Va. · Vol. 44, No. 5 (2020), p. 15

“My worst buy in 80 years of farming is my New Holland BR740 round baler. A bearing gave out, and I found that in order to replace it I would have to buy an entire new assembly for $600. Also, the company changes part numbers without notifying the dealer, and if the wrong part comes in to the dealer the company doesn’t want to take it back. I think the company’s customer service department needs an overhaul.

“I’ve had nothing but trouble with my Stihl MS 180c chainsaw. After I used the saw a little, some parts of the oiler fell out. However, I own 2 other Stihl chainsaws that do run good.”

Best Buy
Earl Ray Zimmerman, Ephrate, Penn. · Vol. 29, No. 3 (2005), p. 13

“My 2004 New Holland BR 740 ‘silage special’ round baler is my best buy. It makes 4 by 5 bales that weigh about 900 lbs. apiece. It bales faster than my old NH 648 model ever did. I used it last year to make about 4,500 bales. I can average 45 bales per hour with three wraps of mesh. My only complaint is that the endless belts need to be improved. I tore five of the baler’s six belts.”

New Holland C232 skid loader

2 Best Buys0 Worst Buys
Best Buy
Bud N. Vogelzang, Sioux Center, Iowa · Vol. 43, No. 4 (2019), p. 12

“I bought a used 1996 New Holland LX565 skid loader in 2014 with 4,950 hrs. on it. I don’t use this machine a lot, but when I do I use it hard to move full buckets of dirt. It’s reliable and easy to operate, with very little electronic junk on it that might cause problems.”

A 2011 New Holland C232 skid loader rates as Bud’s “worst buy”. “A hydraulic line blew at 2,000 hrs., and new hand controls and a new computer system have had to be installed. A power relay stuck, which ruined the battery, and there have been other problems. I’ve spent more than $8,000 on repairs.”

Best Buy
Bud Vogelzang, Sioux Center, Iowa · Vol. 43, No. 4 (2019), p. 13

“I bought my New Holland 565 skid loader several years ago with more than 5,000 hrs. on it. I don’t use this machine hard, but it has been trouble-free and is easy to operate.”

He’s had problems with the 2011 New Holland C232 track skid loader he bought used with about 2,000 hrs. on it. “A hydraulic hose blew and the machine had to be hauled back to the dealer for repairs. They found other problems, too, so my total bill came to $4,754. Then after only 2 more hours of use, electronic problems developed and the loader had to be hauled in again. This time the repair bill was $3,445. Part of the problem was trying to repair a 2011 skid steer with 2018 electronics repair software.”

New Holland L175 skid loader

2 Best Buys0 Worst Buys
Best Buy
Mervin Detweiler, Carrollton, Ohio · Vol. 44, No. 5 (2020), p. 13

“We bought our 2008 New Holland L175 skid loader used in 2013 with 986 hrs. on it. Now it has 4,279 hrs. with no major problems.”

Best Buy
Keith Nolt, N.Y. · Vol. 43, No. 2 (2019), p. 13

“My dad owns New Holland L175 skid loaders and both are best buys. We bought the newest one used with about 2,000 hrs. and it now has 4,000 hrs. The other one has about 9,000 hrs. and has required only a hydraulic oil change. The machine’s hydrostatic drives are rated for 4,000 hrs. but have lasted about 6,000 hrs.”

New Holland L220 skid loader

1 Best Buy1 Worst Buy
Worst Buy
Elmer Hoover, Bethel, Penn. · Vol. 42, No. 6 (2018), p. 15

“Our Kubota SSV65 skid loader is a real beast. We put more than 2,800 hrs. on it in just one year.

“The New Holland L220 skid loader we bought used turned out to be a lemon. We put about 1,100 hrs. on it and then it went up in smoke.”

Best Buy
Ben Lapp, Myerstown, Penn. · Vol. 41, No. 6 (2017), p. 15

“I bought my 2015 New Holland L220 skid loader new in 2016 and rented it to a friend to push snow, but when it came back it had a bent boom. Fortunately, my dealer was able to repair it under warranty. Now this machine has 720 hrs. on it and has required only routine maintenance.”

New Holland L-35

2 Best Buys0 Worst Buys
Best Buy
Luke Verbyla, Benton, Penn. · Vol. 18, No. 3 (1994), p. 16

Luke Verbyla, Benton, Penn.: Luke's pleased with his Rock-O-Matic 57 rock picker, which he bought used. “It’s a tough machine - no problems in five years. It cost less than a hernia operation and is always ready to work. My brother's also pleased with his Rock-O-Matic. “We've had trouble with our 1991 New Holland 553 skid steer loader. The cab is so small it must have been made for a midget, and the muffler broke with only 90 hours on the machine. Hydraulic oil started leaking at 400 hours. It has poor traction when it’s notonconcrete. I had owned a New Holland L-35 model which liked much better.”

Best Buy
Dale Farney, Lowville, N.Y. · Vol. 11, No. 1 (1987), p. 14

Dale Farney, Lowville, N.Y.: He nominates a 1984 Hesston 7155 field chopper and a 1971 New Holland L35 skid steer loader as “best buys’’. “The chopper has fewer moving parts than most choppers which makes for easier servicing and fewer breakdowns. We’re extremely pleased with this easy-running, high-capacity chopper. “The skid-steer loader is one of the best buys we’ve ever made. After 15 years of doing everything from cleaning our free stalls to digging rocks off our cropland, this machine is still going strong. The Wisconsin air-cooled engine has never been touched except for oil changes and plugs and points.”

New Holland L-555 skidsteer loader

2 Best Buys0 Worst Buys
Best Buy
Robert Halverson, West Union, Iowa · Vol. 17, No. 4 (1993), p. 15

Robert Halverson, West Union, Iowa: A 1991 Massey-Ferguson 3140 tractor heads Robert's “best buy” list. “No problems after 1,500 hours. It has much more power than its 115 hp rating would indicate and is the most economical tractor I've ever owned. The 2-door cab saves a lot of steps. The can cooler in the cab, sun screen, and remote controls at the rear of the tractor for operating the 3-pt. hitch are all nice features. “My worst buys are ‘eyeball’ scarecrow balloons. You blow them up and hang them from the rafters of a building. They're supposed tokeep birds out, but they didn’t scare them atall, After three or four months the air went outof them. Luckily I didn’t pay much for them.” Herbert Farney & Sons, Lowville,N.Y.: “We're well-pleased with our Deere 970 roller harrow. Our soil tends to clod up when we plow. The roller harrow breaks clods down leaving a fine seedbed. “Our 1987 New Holland L-555 skidsteer loader is also a best buy. We use it more than any other machine on our farm - we'd be lost without it. It has about 6,000 hours on it. Other than new tires and a few minor problems, we haven't done anything to it. We ( = @ ae maengeens . 2a Best & V ( hope the new model that will replace it will serve us as well as this one has.”

Best Buy
Dale Bunge, Spring Grove, Minn. · Vol. 9, No. 1 (1985), p. 13

Dale Bunge, Spring Grove, Minn.: “This loader is tops. Its 42 hp. Perkins diesel engine starts even when it's 25° below. This loader may cost more than others but it has guts and is worth every penny because it works, and works, and works,” says Dale, pleased with his “best buy" New Holland L555 skid steer loader. He's not as happy with his 100 bu. New Holland mixer mill. ‘‘The mill itself seemed to be excellent but the unloading auger wouldn't lower low enough to be used in our operation. The weight of the mill seemed to shift to the front when unloading which, in turn, raised the unloading auger about 8 in, Fortunately, the dealer allowed us to switch over to a 817 Farmhand which we're very happy with.”

New Holland L785 skid loader

2 Best Buys0 Worst Buys
Best Buy
Richard Davis, Absarokee, Mont. · Vol. 30, No. 1 (2006), p. 15

“My 1993 New Holland L785 skid loader is reliable and runs smooth. I also like my 2004 New Holland L180 skid loader. I use these machines in my concrete and excavation business and wouldn’t want to be without them. They’re the backbone of my business.”

Best Buy
Jim Stauffer, Manton, Mich. · Vol. 17, No. 2 (1993), p. 14

Jim Stauffer, Manton, Mich.: Jim owns a 1992 Ford New Holland L-785 skid steer loader. “It has worked 210 hours with no problems. The diesel engine runs smooth. We traded in a 1985 New Holland skidsteer loader with over 10,500 hours. We depend on our skid steer loaders for feeding our 100-cow dairy herd, as well as cleaning out manure. “Our worst buy was a dealership in AgriNomic Supply. We thought we could save money by buying at wholesale prices. However, what we ordered cost the same as if we had bought it locally and took two weeks to get here. Most of the time we couldn't place an order because there was nobody there or they put us on hold and forgot about us, We tried to get our money back, but the company won’t talk to us or return our calls.”

Worst Buy
Albert Tinnell, Shepherdsville, Ky. · Vol. 31, No. 6 (2007), p. 13

Albert’s pleased with his 2005 Ford 500 Limited all-wheel-drive 4-door sedan. “This car is roomy. My wife and I are large people but we’re still comfortable in it. The all-wheel-drive adds stability when driving on wet or icy roads. No problems. It gets 22 1/2 mpg and has plenty of power. Also, it drives really nice.”

On the negative side, he lists his 2004 New Holland LS 190 skidsteer loader. “This machine has less than 400 hours on it, but already I’ve had the fuel-injected pump rebuilt three times. Also, two hose ends blew off the hydraulic lines with the lift arms in the raised position.”

Best Buy
Brian Bish, Giltner, Neb. · Vol. 30, No. 6 (2006), p. 14

Brian likes Deutz air-cooled diesel engines. “Farming here in central Nebraska we have to survive on irrigation. We have more than 20 wells and pumps to keep running so it’s nice to have reliable, efficient diesel engines to power our irrigation systems. The Deutz engines we use range from 2-cylinder models to V-8’s, and they’re vital to our way of life. I bought most of them used and needing some repair work. Parts for these engines are easy to find and even though most of them were built in the 1970’s, they still perform as well as any engines built today.

“My New Holland Genesis 8770 and 8870 tractors are both best buys. They’re simple to operate and fuel efficient, and the super steer front axle results in a shorter turning radius than other front wheel drive tractors. My tractors have a combined total of more than 10,000 hours on them, yet they’ve needed only minor repairs.

“Our New Holland LS 190 skid steer loader is also a best buy. We use it for loading seed, feeding cattle, moving dirt, and doing tons of other back-saving projects.”

New Holland T4-100 tractor

2 Best Buys1 Worst Buy
Best Buy
Tommy Lansberry, Rileyville, Va. · Vol. 43, No. 4 (2019), p. 14

“I use my 2017 New Holland T4-100 tractor to bale hay and move snow. Works great.”

Best BuyWorst Buy
Greg Kropf, Westphalia, Kansas · Vol. 43, No. 2 (2019), p. 14

Greg says his 2018 Kubota SSV65 skid loader has great hydraulics and power and is easy to service, but has some design problems. “The 2-speed transmission won’t shift up until the tractor’s hydraulic oil warms up, which can require driving slowly for about a half mile. Also, the gauges are located behind the right side drive lever so you have to take your hand off to see them.

“I like my 2017 New Holland T4100 tractor but give it a thumbs down for serviceability. The oil filter is an adventure to find and replace, and the air filter is jammed on top of the engine with little room to access it. I let the dealer change the fuel filters because they’re so hard to access. Also, the transmission is geared so low that I use just the top 4 gears. However, this tractor is exceptionally fuel efficient.”

New Holland TC29 tractor

2 Best Buys0 Worst Buys
Best Buy
Robert Corbin, Sykesville, Md. · Vol. 44, No. 1 (2020), p. 14

“I’m happy with my Greenworks cordless chainsaw, pole saw, and leaf blower (www.greenworkstools.com).

“My New Holland TC29 tractor has operated faithfully for 20 years with no problems. I use it to move tons of dirt, rocks, and firewood. It became my ‘retirement tractor’ after I quit farming.”

Best Buy
Ken Sayre, Cincinnati, Ohio · Vol. 43, No. 4 (2019), p. 12

“I have about 1,800 trouble-free hours on my 2002 New Holland TC29 tractor. It’s well designed and has never been in the shop.

“I had to replace all the steering components on my Ford F-250 heavy duty pickup, but the steering system still vibrates and has excessive play. I also had to replace the fuel injection module, EGR hose collar, alternator, and some 4-WD components. It has only about 65,000 miles on it.”

New Holland TC30 loader tractor

2 Best Buys0 Worst Buys
Best Buy
Linda Smith, Salem, N.J. · Vol. 38, No. 1 (2014), p. 13

“This tractor is a real beast,” says Linda about her New Holland TC30 loader tractor. “I didn’t know anything about tractors when I bought it, so it has been my teacher and my best friend. I’m an older widow, alone on a small farm. I couldn’t get along without my TC30. I’ve really run it through the mill, but it just keeps on going.”

Best Buy
Dickerson B. Hawkins, Gillsville, Ga. · Vol. 33, No. 1 (2009), p. 13

“I like my New Holland TC30 tractor. The fuel gauge on it went out, but my dealer fixed it promptly.

“I’m also happy with my Rhino rotary mower and Rhino 5-ft. finish mower.”

New Holland TC33D tractor

2 Best Buys0 Worst Buys
Best Buy
John P. Morgan, Jr., Plymouth, N.H. · Vol. 42, No. 5 (2018), p. 15

“We use our New Holland TC33D tractor with a backhoe, loader bucket and wood chipper. It has about 1,950 hrs. on it with no problems.

“My Kawasaki Mule 3010 utility vehicle has about 800 trouble-free hrs. on it. We use it a lot during the maple sugar season.

“The crankshaft on our Poulan chainsaw broke, but the company replaced the saw at no cost.”

Best Buy
David A. Medley, Gordon, Ga. · Vol. 31, No. 1 (2007), p. 15

David’s impressed with his 2005 New Holland TC33D tractor. “This tractor has hydrostatic transmission, 4-WD, and Super-Steer which makes it much quicker and easier when working in small spaces and on slopes.”

Best Buy
Melvin Pralle, Greenleaf, Kansas · Vol. 32, No. 6 (2008), p. 15

“It’s the best designed tractor I’ve ever owned,” reports Melvin about his 2000 New Holland TC 35D 4-WD tractor equipped with a frontend loader. “This tractor is easy on fuel and fun to use. I built a grapple fork for it which I use in my tree trimming business.”

Worst Buy
Michael W. Carrico, Mackville, Ky. · Vol. 32, No. 4 (2008), p. 15

“My 2000 New Holland TC 35D 4-WD tractor is an electrical nightmare. It had just 17 hours on it when the entire instrument panel, including the tachometer, went out. It took the dealer two weeks to fix the problem. Then the tractor went back for a recall because of a problem with the hydrostatic transmission and because the 4-WD wasn’t engaging. That problem took two months to get fixed.

“When I finally got the tractor back, I found the cover sleeve on the front driveshaft was bent so I called the dealer to get the sleeve replaced. They wanted $700 to pick up the tractor, fix it, and deliver it back to me. I told them the tractor was still under warranty and that it was their fault so I wasn’t going to pay. I called the company and talked to a customer rep. The tractor was then fixed at no charge.

“At 200 hours the turn signals and emergency flashers quit working. I called the dealer again to get those problems fixed and found out the original recall work hadn’t been done. Since then I’ve never gone back to the dealer and never will, and I’ll never buy a New Holland tractor again. This is the only tractor I own so I’m constantly working on it.”

New Holland TC-40 4-WD tractor

2 Best Buys0 Worst Buys
Best Buy
Edward Weber, Cincinnati, Ohio · Vol. 42, No. 6 (2018), p. 13

“My 2004 New Holland TC-40 4-WD tractor has 1,930 hrs. on it with only a few minor electrical problems. I use it for mowing and garden work during the summer and hauling firewood in winter.”

Best Buy
Edward Weber, Cincinnati, Ohio · Vol. 34, No. 6 (2010), p. 14

“I have almost 1,000 hrs. on my 2003 New Holland TC-40 4-WD tractor with no problems, except for a pin in the forward-reverse shift lever that came out a couple times. I use this tractor with a 6-ft., 3-pt. mounted finish mower and to plow snow with a 7-ft., rear-mount blade. I also use it with a 3-pt. mounted log splitter, a fertilizer and salt spreader, a rear carryall, a rotary tiller and many other pieces of equipment. I mounted a quick hitch on the 3-pt., which makes changing equipment an easier job.”

New Holland TN55D tractor

1 Best Buy1 Worst Buy
Worst Buy
Jeff W. Brown, Huntersville, N.C. · Vol. 47, No. 4 (2023), p. 14

A 2002 New Holland TN55D tractor rates as Jeff’s worst buy. “Everything works well except the electronic power shift shuttle. Always buy a mechanical shuttle. Anything with a computer can have an expensive failure.”

Best Buy
Norman Roorda, Monroe, Iowa · Vol. 24, No. 3 (2000), p. 15

“I’m pleased with the comfort and quiet ride on my 1999 Ford F-150 4-WD pickup. I use it regularly to make trips to farm land 200 miles away.

“I’m impressed with my New Holland TN55D tractor. I especially like the cab’s roominess and ease of entry since I’m tall and getting a little stiff with age. The cab on this tractor is far superior to the cabs on other tractors of similar size.”

New Holland TN-70 tractor

1 Best Buy1 Worst Buy
Worst Buy
Bruce Thompson, Amenia, N.Y. · Vol. 31, No. 5 (2007), p. 14

“My 1999 Toyota Tacoma pickup has more than 160,000 miles on it with no problems. I drive it every day and it always starts right up.

“My 2003 New Holland TN-70 tractor is a worst buy. First a sensor on the transmission went out and the tractor was down for a week before the dealer came out to fix it. Then, with only 500 hours on it, another electrical problem developed inside the transmission. It took two weeks and $1,200 to fix. Then another transmission sensor went out, and it took another two weeks to fix and cost another $1,500.”

Best Buy
Bill Guthrie, Justin, Texas · Vol. 31, No. 1 (2007), p. 13

“I’m well satisfied with my 2006 New Holland TN70 tractor. It works as advertised and is a very strong tractor.

“The chop saw I bought from Harbor Freight is my worst buy. It lasted less than two cuts before it burned out. It’s a piece of junk. I replaced it with a Milwaukee model that works great.”

New Holland TN 755 tractor

2 Best Buys0 Worst Buys
Best Buy
David Albright, Meridian, Okla. · Vol. 26, No. 6 (2002), p. 15

“My 2000 New Holland TN 755 tractor runs great. It has a great heater and air conditioner and I really like the Super Steer feature. On the negative side, it’s hard to get parts for it. Also, one time the gas tank fell out and the company refused to pay the transportation fee to have the tractor delivered to the dealer for repairs.”

Best Buy
Dennis Ferlito, Oswego, New York · Vol. 25, No. 6 (2001), p. 16

“This tractor has exceeded my expectations,” says Dennis, pleased with his 2000 New Holland TN 755. “It has a lot of power and torque and is highly maneuverable. It doesn’t have a ground drive pto, but instead the pto works live off the tractor. This was annoying because I had asked to see the operator’s manual before I bought the tractor, and according to the manual a ground drive pto was standard equipment. I found out later that the ground drive pto is available only on the company’s European-distributed tractors.”

New Holland TR70

2 Best Buys0 Worst Buys
Best Buy
Paul Kuhn, Genoa, Ill. · Vol. 12, No. 5 (1988), p. 13

Paul Kuhn, Genoa, Ill.: “It’s the most comfortable, quiet combine I've ever used, and has plenty of capacity,” says Paul about his Case-IH 1660 combine. “I can pick 150 bu. corn at 6.6 mph. We had a New Holland TR70 before this one and it had much less capacity. It’s like comparing a Volkswagen to a Cadillac.”

Best Buy
J. Allison, Clinton, Kentucky · Vol. 11, No. 2 (1987), p. 12

J. Allison, Clinton, Kentucky: “Our best buy is a Dickey-john grain loss monitor for our New Holland TR-70 combine. We feel it paid for itself on 300 acres of corn. We've always had problems keeping com in the combine on hillsides. This monitor, once you get it calibrated, tells you when to slow down or speed up. Company was helpful installing and calibrating the monitor."

New Holland TS6.110 tractor

2 Best Buys0 Worst Buys
Best Buy
David Reits, Niles, Mich. · Vol. 43, No. 4 (2019), p. 14

David’s had problems with the diesel engine fluid (DEF) system on his 2018 New Holland TS6.110 tractor. “The DEF system shuts down the engine, sometimes with no warning. The system went down 4 times in just one year.”

Best Buy
David H. Reits, Niles, Mich. · Vol. 42, No. 3 (2018), p. 15

“The computer on my 2018 New Holland TS6.110 diesel tractor went out just three days after I bought the tractor. The computer is very sensitive and acts up way too much. Another problem is the tractor uses too much diesel exhaust fluid. I can already tell that maintaining this tractor is going to get expensive.”

New Holland TV140 tractor

1 Best Buy1 Worst Buy
Best Buy
Myron Peterson, Oshkosh, Neb. · Vol. 35, No. 1 (2011), p. 13

“I use my 2007 Kubota RTV 900 tractor all year long with no problems.

“My New Holland TV140 tractor has had problems from the start. The wheel studs keep breaking, and I’ve had problems with electrical shorts and leaking hydraulic hoses. Now at 2,900 hours the engine has to be replaced.”

Worst Buy
Dale Neidhardt, New Salem, North Dakota · Vol. 24, No. 2 (2000), p. 17

“We’ve had tremendous problems with our bi-directional New Holland TV 140 tractor, which we bought new. When it was delivered in November, 1998, one door handle was on backwards, the mirrors were loose, the air conditioning didn’t work, and there was water in the cab that had leaked in. Later, cab windows started shattering. It even happened while the tractor was parked in the shed.

“But we’ve had much worse problems. The transmission housing cracked because a shift cylinder inside kept hitting against the inside of the housing. It was in the shop for three weeks. We had to rent another one to replace it. You don’t plan to spend money like that when you just bought a new tractor.

“Later, a hydraulic line broke while driving in the field and pumped out all the hydraulic fluid.

“One of the worst things that happened was that a pin that holds the drawbar to the tractor fell out while I was pulling my sprayer. It was a pin under the tractor that holds the entire drawbar assembly in place – not the drawbar pin. When it came off the hydraulic couplers did not release the way they are supposed to. Instead, they tore the pump off the sprayer, which cost us an extra $1,000 for a new pump – but more importantly, delayed our spraying by two days.

“Last summer another hydraulic line broke in the field. Now the differential lock doesn’t work and there’s an oil leak on the side of the engine by the injection pump.

“New Holland says it’s not responsible for extra expenses caused by the failure of its tractor. But I say, who would ever expect the transmission cover to break or the drawbar to fall off a new tractor? We’re frustrated from dealing with the company because they do not seem to want to recognize that this tractor has big problems.”

New Holland Workmaster 40 tractor

2 Best Buys0 Worst Buys
Best Buy
Bud Watts, Spencer, Iowa · Vol. 50, No. 1 (2026), p. 14

“I’m really happy with my New Holland Workmaster 40 tractor. It’s 40 hp but on a smaller frame for acreages or a yard tractor. It has amazing pulling power with FWA and a locking rear axle. A recent derecho windstorm gave us plenty to challenge it. Easy starter all year round, and the diesel is easy on fuel. I highly recommend this tractor.”

Best Buy
Mike Grubb, Georgetown, Ind. · Vol. 40, No. 4 (2016), p. 14

Mike is happy with his 2014 New Holland Workmaster 40 loader tractor. “This tractor is almost as powerful as our Deere 3010 and as nimble as the Ford 1910 it replaced. It’s an excellent example of big performance in a small package. It powers the equipment we need to use on our three farms and will run all day on a tank of fuel. The tractor has great features like shuttle shift transmission, 4-WD, power steering, and a 3 by 4 transmission. It has a lot of power and is built strong.”

Best Buy
Thomas Peachey, Leesburg, Ohio · Vol. 22, No. 4 (1998), p. 15

“The engine is a little noisy, but overall it has been a reliable machine and does what we want it to,” says Thomas about his 1995 Case-IH 1840 skidsteer loader. “The Cummins engine has a lot of power and is dependable, and the hydraulics are smooth and responsive.”

He nominates his 1996 New Holland 25-ft. portable hay elevator as his “worst buy”. ”It’s the type you’re supposed to move around by hand but it’s very heavy for two people to move. We can’t run it for long before it breaks down - chains jump off sprockets, parts bend, etc. Also, the pulley rubs on the barn floor unless we put blocks underneath it.”

Worst Buy
Mark Vernon, West Liberty, Ohio · Vol. 14, No. 6 (1990), p. 13

Mark Vernon, West Liberty, Ohio: Mark's “worst buy” is his New Holland bale elevator, “This elevator must have been built from electrical conduit and bubble gum. It definitely wasn’t built to handle bales with any weight. The bottom section has been reworked twice and I had to weld additional supports on it. The motor mount has cracked twice and there’s no way to keep the belt tight for long. It sure doesn't compare in quality with the other New Holland equipment I own,”

New Holland 1002 bale wagon

0 Best Buys1 Worst Buy
Worst Buy
Arthur Duckworth, Stanley, N.C. · Vol. 27, No. 5 (2003), p. 13

“My New Holland 1002 bale wagon is my worst buy. The dealer I bought it from ran many magazine ads indicating that all their equipment is fully reconditioned and tested in their shop. So I bought the bale wagon sight unseen based on the strength of the company’s reputation and claims, which was my first mistake. The unit shipped to me wasn’t equipped as described. For example, it had been modified by adding a hydraulic cylinder to lift the pickup head, which required a valve splitter and two hydraulic remotes to run it instead of one as I had expected. One of the push-off springs was broken, and the push-off channels and guides were bent. One of the push-off guides had the wrong size cable adapted and the unit wouldn’t function correctly. Also, it leaked hydraulic fluid like a sieve.

“I emailed the implement dealer several times but never got a response. I also called several times and finally talked to a shop manager who assured me they would cover the cost of repairs. I repaired the unit to make it functional - making only the necessary repairs - and then sent the dealer an itemized bill as instructed. The bill was less than $300 because I did most of the work myself. However, I never received the money or got any response at all from the dealer to my followup emails and calls. Here are the lessons I learned: never buy equipment sight unseen and deal only with reputable people.”

New Holland 1010

0 Best Buys1 Worst Buy
Worst Buy
Terry Riegle, Sparta, Mo. · Vol. 11, No. 6 (1987), p. 12

Terry Riegle, Sparta, Mo.: “I haven't bought anything new for years but the worst machine I ever bought was a New Holland 1010 square bale stacker. I’m a mechanic but I couldn't make it work in 7 years of trying. My wife says two girls can stack more hay than thatstacker, Itcutbale strings atthe pickup and would not pull away from a stack without tearing it down in the process. The dealer told me 1010's cannot be fixed but he took it in on trade,” Terry says his “best buy” machine is a 1979 Hesston 5800 round baler he bought used. “It had been sitting outside but after a new belt, a new bearing and one new sprocket, the baler worked just as good as new, “IT also have a Homelite C-5 chainsaw that we boughtin 1963. Itstill runs and Tuse iteach winter, The engine has never been opened up, It’s only had tuneups and carburetor work.” Terry also has a “best buy” tractor. “I've used my Massey Ferguson 180 diesel tractor with a 248 engine for the past 10 years with only one breakdown, That happened last summer when the throw-out bearing went bad, I changed it myself.”

New Holland 1069

1 Best Buy0 Worst Buys
Best Buy
Robert Frey, Phillipsburg,N.J. · Vol. 13, No. 1 (1989), p. 13

Robert Frey, Phillipsburg,N.J.: “We've owned Ladig haylage and high moisture corn unloaders for 14 years. They’re dependable, owner-serviceable and and far less expensive to maintain than comparable Harvestore units.” Robert's had problems with his Sears 1/ 2-in, electric drills, 1/4-in. battery-powered electric drills and 1 hp air compressors. “They're apparently designed for once-ayear homeowner use and not for farm use.” Bob Comfort, Fenwick, Ontario; Bob likes his Hesston 4570 center-tine square baler. “The bales are consistently solid and work perfectly with my other best buy - a used New Holland 1069 stock cruiser.”

New Holland 110 hp 4-wd

0 Best Buys1 Worst Buy
Worst Buy
S.R. Wilson, Redford, Mo. · Vol. 40, No. 6 (2016), p. 13

“I haven’t had to make any major repairs to my 1973 Allis Chalmers 160 tractor. It still runs like a top.”

He’s disappointed with his 2015 New Holland 110 hp, 4-WD loader tractor. “I bought it in January 2016, and the following spring I was mowing with it when oil started leaking onto the belts, causing them to burn off and the tractor to overheat. The dealer installed new belts and I went back to the field, but the same thing happened again. The dealer came out to pick the tractor up and I traded it for a Kubota.”

New Holland 1116

1 Best Buy0 Worst Buys
Best Buy
Pat Walker, Tulelake, Calif. · Vol. 13, No. 5 (1989), p. 13

Pat Walker, Tulelake, Calif.: Pat's “best buy” is his New Holland 1116 swatherwindrower. “It’s comfortable, easy to operate, and requires litte maintenance. It takes the wear and tear out of cutting and conditioning our 200-plus acres of alfalfa and makes the job fun again.”

New Holland 1118

1 Best Buy0 Worst Buys
Best Buy
J. Earl Anglen, Riverton, Wyo. · Vol. 18, No. 1 (1994), p. 16

J. Earl Anglen, Riverton, Wyo.: He's pleased with his Lester 40 by 64-ft. pole building. “We use it as a garage, storage shed, and shop. Ithas two 10-ft. wide, 14-ft. high sliding doors on one end and two rollup doors for cars and trucks on the other end. There’s plenty of room for vehicles, tractors, and shop tools. It’s completely insulated and has 20-ft. wide concrete approach pads, It’s an attractive building and useful, too. I'd recommend it to anyone. “My 1992 New Holland 1118 haybine windrower is a fine machine. My only complaint is with the foot valve that raises and lowers the header. To raise it have to push down a lot harder than I did with my old New Holland 912 windrower, Other owners of New Holland windrowers in this area all like their machines. They’re dependable and don’t require much maintenance.”

New Holland 1409 discbine

1 Best Buy0 Worst Buys
Best Buy
Jake Herzog, Slingerlands, N.Y. · Vol. 35, No. 2 (2011), p. 15

Jake nominates his 2009 New Holland 1409 discbine as his “best buy”. “This machine has performed beyond my expectations and is easy to service. It has easily accessible grease fittings. Also, it’s made in the U.S.

“SAS handcrafted shoes are the most comfortable and durable shoes I’ve ever worn (www.sasshoes.com; ph 877 782-7463). They cost a little more, but they’re U.S.-made and last twice as long as less expensive shoes. Unfortunately, the company doesn’t make heavy-duty work shoes.”

He doesn’t like aftermarket tractor parts made offshore. “I bought a cheap replacement manifold for a customer’s Deere 420 tractor. The casting and machine work on it were terrible. It took at least three hours to rework the manifold so it would fit without leaking. I would’ve been better off paying twice as much for the OEM part.”

New Holland 1441 discbine

0 Best Buys1 Worst Buy
Worst Buy
D. Cramer, Ringwood, Okla. · Vol. 31, No. 4 (2007), p. 15

He nominates his 2002 Deere 7810 MFWD tractor as his “best buy”. “This is a nice tractor. It’s comfortable, quiet, has a good ride, is efficient and productive, and is built strong for its size. At the end of the day I don’t feel as beat up and worn out as I do with our other IH tractors. It actually helps get things moving on our farm early in the morning, because whoever gets to the field first gets to drive the 7810.”

He’s not impressed with his New Holland 1441 15-ft. discbine. “This machine won’t cut alfalfa without leaving a lot of it in the field. It leaves huge streaks of uncut hay between each cutterhead, It won’t cut short hay at all, and it beats the leaves off the hay as it throws it into the crimper. Also, it puts a lot of dirt in the windrow. The dealer said the blades would last 300 to 400 acres, but in our sand they could hardly finish 80 acres. The blades had to be changed daily. It’s a high maintenance machine, and its resale value was horrible. I’d never buy a New Holland discbine again.”

New Holland 1473 swather equipped

1 Best Buy0 Worst Buys
Best Buy
Harold Painter, Springview, Neb. · Vol. 25, No. 6 (2001), p. 16

Harold likes his 2000 New Holland 1473 swather equipped with a 16-ft. head. “It can handle a lot of material without plugging. It’s a good machine.

“My 1998 Chevrolet 2500 3/4-ton pickup was the worst investment I ever made. It was equipped with a 350 cu. in. Vortec engine and a 5-speed transmission. One problem was that I had to run the engine at 3,000 to 4,000 rpm’s just to get power. It also used a lot of fuel and got only 10 mpg. I finally traded the pickup off.”

New Holland 1495 self-propelled haybine equipped

1 Best Buy0 Worst Buys
Best Buy
Randy Brooks, Peterstown, W. Va. · Vol. 28, No. 6 (2004), p. 15

“It works fast and does a great job,” says Randy, pleased with his 1980 New Holland 1495 self-propelled haybine equipped with a 12-ft. head. “I’m able to cut 15 acres with it in only two hours.

“My New Holland L775 skid steer loader is a best buy.

“My Vermeer 605C round baler is my worst buy. If the hay is a little green or wet, it clogs up in the baler’s front corners.”

New Holland 1500 combine every year

1 Best Buy0 Worst Buys
Best Buy
Erwin Nelson, Roseau, Minn. · Vol. 35, No. 6 (2011), p. 15

“I still use my 1973 New Holland 1500 combine every year. Works great for harvesting bluegrass.”

New Holland 1510 compact tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Bruce L. Terry, Hillsboro, Alabama · Vol. 26, No. 1 (2002), p. 16

Bruce nominates his 1998 New Holland 1510 compact tractor equipped with a diesel engine as his “best buy”. “I use it with a 5-ft. Bush Hog finishing mower to mow my 3-acre yard. It reduced my mowing time from a half day to two hours. I’ve had 10 to 12 tractors over the years, but this one is the best one yet and the most fun to operate.”

New Holland 1510 4-WD diesel tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Roy David Fricker · Vol. 42, No. 3 (2018), p. 13

Roy is pleased with his 2010 New Holland 1510 4-WD diesel tractor equipped with a front-end loader. “It’s amazing how much I use this tractor. It’s easy on fuel.

“My 2008 HTP America MIG wire welder performs great (www.usaweld.com; ph 800 872-9353). I use it with flux cored wire, but you can also use it with gas and solid wire. The company sells welding wire and a wide variety of parts for their MIG welders, as well as for other brands. Great company and great people.”

New Holland 1525 tractor

1 Best Buy0 Worst Buys
Best Buy
Derrick Caisse, Chaplin, Ct. · Vol. 34, No. 5 (2010), p. 13

Derrick likes his New Holland 1525 tractor. “It’s a smaller unit at 35 hp and has performed flawlessly. We have two other tractors that sit idle because this one outperforms both of them. It’s our go-to tractor now.

“My Ryobi 4-stroke weed trimmer developed an oil leak almost immediately after I bought it. The company replaced it with a factory refurbished unit, but it doesn’t run as good as the original model and now I’m stuck with it.”

New Holland 1530 loader tractor

1 Best Buy0 Worst Buys
Best Buy
Donald E. Hoffart, Plainview, Neb. · Vol. 24, No. 5 (2000), p. 16

“My 1999New Holland 1530 loader tractor is my best buy. The power steering works great, even with a load in the bucket. It has a 3-speed hydrostatic transmission which works good for my tiling business. It’s equipped with a rocker front axle so it turns very short.”

New Holland 157

1 Best Buy0 Worst Buys
Best Buy
W.A. Gibbs, Elmwood, Tenn · Vol. 19, No. 1 (1995), p. 16

W.A. Gibbs, Elmwood, Tenn.: His best buy is a New Holland 157 hay tedder. “This 10-ft. tedder does a terrific job in fresh-cut as well as rained-on hay. It’s an extremely well-built machine, “My worst buy is my Woods rotary hay cutter. They made the blades flimsy so they wear out far too soon.”

New Holland 160 skid steer loader

1 Best Buy0 Worst Buys
Best Buy
Francis Henderson, Brinston, Ontario · Vol. 32, No. 3 (2008), p. 15

“We use our New Holland 160 skid steer loader every day for jobs such as cleaning feed yards, loading bales, and picking rocks. We use four different quick-tach buckets with it.

“Our Bodco motorized silage cart is only 1 1/2 years old but runs like it’s about 25 years old. The feeder chain breaks because it runs too hard and fast. Now the paint is coming off.”

New Holland 162

1 Best Buy0 Worst Buys
Best Buy
Eric Averwater, Batavia, Ohio · Vol. 13, No. 4 (1989), p. 14

Eric Averwater, Batavia, Ohio: “Ittakes only 2 min. to fold and unfold the two outside rakes,” reports Eric, pleased with his 1986 New Holland 162 17-ft. hay tedder. “This tedder turns over heavy cuttings like no other machine and really shines in windrows that have been rained on. It scatters the windrow out like it had never been raked. can ted as fast as can control the tractor.”

New Holland 1620 HTS 4-WD tractor equipped

1 Best Buy0 Worst Buys
Best Buy
John McGreevy, Jr., Fawn Grove, Pa. · Vol. 24, No. 2 (2000), p. 17

John likes his New Holland 1620 HTS 4-WD tractor equipped with a front-end loader. “It’s reasonably priced and easy to use. The loader has a lot of reach and speed.

“My all-time best buy is my 1983 Deere 2350 4-WD tractor. It has about 7,500 hours but is ready for more work. I use it to mow about 4,000 miles of highway roadsides every year. In winter I mount a blade on front and a snowblower on back.”

New Holland 163 rear-folding hay tedder

1 Best Buy0 Worst Buys
Best Buy
Albert Patterson, Taft, Tenn. · Vol. 32, No. 6 (2008), p. 14

“My 2008 Toro Personal-Pace walk-behind lawn mower is my worst buy. It cuts good and has plenty of power, but it bags poorly if the grass is even the slightest bit damp or thick. Also, the transmission went out after only 20 hours of use. The dealer fixed it under warranty but it took two weeks. It lasted another few weeks before it hit a 1-in. stick and bent the crankshaft, and that wasn’t covered by the warranty. It cost about $200 and took two months to get it going. It still vibrates badly.

“My Honda HR 214 Easy Start mower is a best buy. It’s at least 12 years old and must have more than 5,000 hours on it, but it still keeps on going. It smokes, and it has a homemade starter and bicycle cables in it, yet it always starts on the first pull and just won’t die. It cuts and bags as good as a new model. It has hit bricks, pieces of concrete, rebar, rope and wire, but still runs smooth. It’s a good, dependable mower. If Honda still made this model, we’d buy another one.

“My 1996 New Holland 163 rear-folding hay tedder is a best buy. We bought it last spring after our old, worn-out M&W tedder went to pieces in the field. We haven’t had a bit of trouble with the new one. It pulls good behind a pickup, picks up all the hay, and is easy to maintain. It doesn’t use any gear oil, only grease. And it’s so quiet that I have to keep looking back to make sure it’s still working. I look forward to using this machine for years to come.”

New Holland 163 Four Star hay tedder

0 Best Buys1 Worst Buy
Worst Buy
Neal S. McCleary, Elkton, Md. · Vol. 45, No. 1 (2021), p. 14

Neal’s worst buy is a 2017 New Holland 163 Four Star hay tedder. “All four wheels went bad because there was no grease on the bearings. The dealer said it was the first he had ever heard of and packed the new bearings with grease. The tongue is too short and broke off the guards. The tines cut into my tractor tires.”

New Holland 163 Hay Tedder

1 Best Buy0 Worst Buys
Best Buy
Bob Peter, Sedro-Woolley, Wash. · Vol. 44, No. 2 (2020), p. 14

Bob is happy with his 2012 New Holland 163 Hay Tedder. “I have been using several different brands of hay tedders for over 40 years. This New Holland does a much better job than any of the others I have used.”

New Holland 1720 4-WD loader tractor

1 Best Buy0 Worst Buys
Best Buy
Ken Haag, Unionville, Mich. · Vol. 41, No. 1 (2017), p. 12

“It never lets us down and has required very few repairs,” says Ken about his 1998 New Holland 1720 4-WD loader tractor. “It rides on turf tires, which we really like because they don’t tear up our yard. This tractor is fuel efficient and has a lot of power. We use it with a sicklebar mower, manure spreader, rear-mounted blade, and springtooth drag. It’s very maneuverable in tight places, easy to get on and off, and comfortable to operate. Well designed.

“We love our 2002 Chevrolet Silverado 2500HD 4-WD extended cab, shortbed pickup equipped with a 6.0-liter engine and manual transmission. It has a B&W turnover gooseneck hitch that drops out of the way, allowing full use of the pickup bed. It has plenty of power to pull our big horse trailer. This pickup rides and drives great. It’s an easy truck to own.”

New Holland 1725 4-WD diesel tractor equipped

1 Best Buy0 Worst Buys
Best Buy
David Koenig, Quincy, Ill. · Vol. 36, No. 1 (2012), p. 13

David’s pleased with his 1996 New Holland 1725 4-WD diesel tractor equipped with a frontend loader. “I use this tractor for lots of heavy work, including lifting logs and maintaining terraces. It’s very fuel efficient - I can run it all day long and still have fuel in the tank at the end of the day. The little diesel engine in it has amazing power for its size.”

New Holland 185

1 Best Buy0 Worst Buys
Best Buy
Philip Geissen, Moulton, Texas · Vol. 18, No. 6 (1994), p. 14

Philip Geissen, Moulton, Texas: Philip likes his New Holland 185 box manure spreader and New Holland 306 side delivery spreader. "Both spreaders work great. No problems with either one. The side delivery model does an excellent job of spreading wet manure."

New Holland 1890 self-propelled forage harvester

1 Best Buy0 Worst Buys
Best Buy
Walnut Dale Farms, Boswell, Penn. · Vol. 21, No. 3 (1997), p. 14

“We traded a New Holland 1890 self-propelled forage harvester and a Deere 3960 forage harvester in for a 1996 Gehl 1065 pull-type harvester. Both of the old machines did a good job, but we had some expensive experiences with foreign metal objects and wanted a machine equipped with a metal detector. “We use a Deere 4630 tractor to pull the harvester and it performs quite well. We’re glad that we have the metal detector. Last year while we were harvesting silage the metal detector went off 33 different times on 26 rows of corn that bordered a fence around our property. It turned out that a month before we went into the field our neighbor had a young fellow replace the electric fence wire. He threw lengths of old wire helter-skelter into our standing corn. Without the metal detector we’d never have known about the wire.” On the negative side, he lists parts-ordering through the AGCO company. “My dealer tries his best to provide good service, but ordering parts through the AGCO system can be a real nightmare. I once ordered an oil seal for a manure spreader but instead received a shear bar designed for a loader bucket. It turned out that both items had the same part number. Recently I needed to rebuild an axle assembly for my White field cultivator. After three deliveries of parts that didn’t fit, I disassembled another axle and found the matching parts at a Deere dealership.”

New Holland 1920 4-WD tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Joe Costello, Andover, N.Y. · Vol. 24, No. 3 (2000), p. 16

“My 1997 Deere 6 by 4 Gator has been absolutely trouble-free and is my best buy. It starts the first time, every time, no matter how cold the weather is. It’s the perfect machine for getting in and out of a woodlot to cut firewood, especially in wet conditions. It’ll haul a half face cord of wood at a time.

“My 1999 New Holland 1920 4-WD tractor equipped with a Great Bend front-end loader is a best buy. It’s a real workhorse for its size. The 12 by 12 transmission was well worth the extra cost.

“My 1995 Ford F-150 4-WD pickup equipped with a 300 cu. in. 6-cyl. engine and a 5-speed transmission is a best buy. It’s a very reliable truck. The only problem I’ve had is with the cheaply-built oil pan. At 57,000 miles, the threads are bad so it will have to be replaced.

“My three Husqvarna chainsaws - models 51, 254, and 268 - are also best buys. They’ve never let me down.”

New Holland 1981

1 Best Buy0 Worst Buys
Best Buy
Wilfred Rouse, Milden, Sask. · Vol. 10, No. 1 (1986), p. 14

Wilfred Rouse, Milden, Sask.: ‘My best buys are a New Holland 1981 TR 85 combine and two Versatile 4-WD 700 and 825 series tractors. I've used New Holland combines since 1975 and have had excellent performance as well as good dealer service. The same applies to my Versatile tractors. I've had Versatile since 1969 and upkeep has been practically nil. Both companies get a number one rating from me.”

New Holland 2100

1 Best Buy0 Worst Buys
Best Buy
Douglas Eaves, Woodsboro, Md. · Vol. 12, No. 1 (1988), p. 14

Douglas Eaves, Woodsboro, Md.: “Our New Holland 2100 forage harvester with a 939 6-row cornhead is one of our best buys. The harvester has had only a few problems in the first 400 hrs. The cornheads have been improved over earlier models with self-adjusting cut-off discs, sealed lower gathering chains, and grouped grease fittings. However, the head does seem heavy even for this chopper. Has plenty of capacity. We cut 80 10-ton loads in 11 1/2 hrs. Our Papec 24-ft. forage wagons are also a best buy, as is our New Holland model 40 silage blower. “Our worst buys are two 4,000 gal. liquid manure spreaders made by WIC Co. of Quebec, Canada and distributed in the U.S. by U.S. Agri-Systems, Oxford, Penn. The Italian pto shafts didn’t last three months and the sub-frame on one tank collapsed. The company would only replace the tank if we shipped it to Canada at our cost. Our dealer finally repaired the tank as well as the cracks on the main frames of both spreaders. A factory rep who looked at the tanks said we were using them too much, I’m sure our problems with these spreaders won't quit when the warranty does,”

New Holland 211

1 Best Buy0 Worst Buys
Best Buy
Gary Abernethy, Hickory, N. C · Vol. 19, No. 1 (1995), p. 15

Gary Abernethy, Hickory, N. C.: “My New Holland 211 disc mower conditioner cuts dead, wet, thick hay at 6 mph without slowing down, but when cutting thin hay I have to slow down the rpm’s or it'll leave the crop in the field.”

New Holland 232

1 Best Buy0 Worst Buys
Best Buy
Gary Staggs, Milan, Mo. · Vol. 12, No. 1 (1988), p. 13

Gary Staggs, Milan, Mo.: He's happy with a New Holland 232 grinder-mixer he bought used. “It does everything it’s supposed to do.”

New Holland 2320 tractor wobbles

1 Best Buy0 Worst Buys
Best Buy
L.A. Stoehr, Marysville, Kan. · Vol. 40, No. 1 (2016), p. 15

“Our New Holland 2320 tractor wobbles terribly from side to side when going down the road. The dealer says it’s a Titan tire problem and that I should see them. Titan says I should see New Holland. Another problem is the loader leaks down when handling crushed rock. I had two company dealers check the loader, tractor, and hydraulics, but both say everything is within specifications and there’s nothing they can do to help. They must have thought we had purchased a manure spreader, because no one wants to stand behind it.”

New Holland 2331 discbine

1 Best Buy0 Worst Buys
Best Buy
Enoch Aarrestad, Debden, Sask. · Vol. 34, No. 4 (2010), p. 13

“I like my 2006 New Holland 2331 discbine, which is designed to mount on New Holland bi-directional tractors. One time I broke 2 gears on the mower after hitting a rock. Then I got the shear hub update and since then this machine has worked great. Even in hay fields with a lot of pocket gopher mounds it just keeps on going. Also, this machine doesn’t seem to plug up in heavy, wet hay like my haybine did. I used it to cut 1,900 acres last year.

“My 2004 Global Hydronics outdoor wood boiler is my worst buy. It’s very inefficient. Uses much more wood than other units, and last year it sprang several leaks. I fixed most of them, but recently I found a couple more small leaks and will have to fix them, too. The company won’t stand by its warranty.”

New Holland 24 hp compact loader

1 Best Buy0 Worst Buys
Best Buy
John Latulipe, Bombay, N.Y. · Vol. 41, No. 1 (2017), p. 14

“The only downtime we’ve ever had with our 2004 New Holland 24 hp. compact loader tractor was due to a bad ground cable. We use this tractor to mow grass in a small orchard and to remove snow. It sometimes seems like it can do more work than 4 full-size tractors.”

New Holland 2550 swather

1 Best Buy0 Worst Buys
Best Buy
Robert L. Guelff, Glendive, Montana · Vol. 28, No. 1 (2004), p. 13

“Our New Holland 2550 swather is a best buy. It cuts good and is easy to maintain. No problems.”

New Holland 255 3-pt mounted rake tedder

1 Best Buy0 Worst Buys
Best Buy
Arden Walizer, Loganton, Pa. · Vol. 24, No. 2 (2000), p. 17

“My best buy is my New Holland 255 3-pt. mounted rake tedder. It teds hay and rakes perfect. No complaints.

“My Tanco 5505 self loading bale wrapper is a best buy. It works great provided you have a tractor with adequate hydraulics. I use a 1941 Massey Harris 101 Junior tractor to operate it. The tractor didn’t have hydraulics so I installed live hydraulics off a Massey 35 self-propelled combine. It works great.”

New Holland 256

1 Best Buy0 Worst Buys
Best Buy
Kelly Snider, Denton, N.D. · Vol. 9, No. 3 (1985), p. 13

Kelly Snider, Denton, N.D.: My New Holland 256 Rolobar hayrake does a great job. Gets every leaf and stem, leaving fields clean. Makes a neat windrow even at speeds up to 10 mph.”

New Holland 275

1 Best Buy0 Worst Buys
Best Buy
Joseph Warren, Maple City, Kan · Vol. 19, No. 4 (1995), p. 14

Joseph Warren, Maple City, Kan.: “It drives like a dream,” says Joseph, pleased owner of a 1985 Pontiac Grand Prix. “It turns corners without skidding and the 6 cyl., 4.2-liter engine runs smooth, It has a lot of power and doesn't require much maintenance, I tuned it up at 45,000 miles and it still runs good even though it has 132,000 miles. It gets 24 mpg on the highway. “My worst buy is my Deere field cultivator. It's equipped with 6-in. sweeps and spring shanks with coil springs that break easily, The springs cost quite a bit and don’t last long. The arms on the wheels are held in place by copper bushings which wear out, “My New Holland 275 baler has trouble tying bales in dry, springy hay which pushes the strings off the knotter so it won't tie. The baler should come with gears so that the knotter can be speeded up to tie the knot before the plunger returns in those conditions, However, in normal hay conditions it ties good.”

New Holland 282 self-propelled square baler

1 Best Buy0 Worst Buys
Best Buy
Weldon McDowell, Ogden, Ark. · Vol. 44, No. 3 (2020), p. 13

Weldon purchased a used 1962 New Holland 282 self-propelled square baler. “I have baled thousands of bales with it and it still operates well, with no major repairs.”

New Holland 286

1 Best Buy0 Worst Buys
Best Buy
Quey Johns, Mtn. Home, Idaho · Vol. 9, No. 6 (1985), p. 15

Quey Johns, Mtn. Home, Idaho: "I went through 4 brand new machines before I got one that worked. The only reason | drove the 75 miles for each one was because of a superb dealer,” says Quey, unhappy with his 1985 AT&T model 2700 phone answering machine. ‘The machine | have now works most of the time but it always cuts the caller off at 30 sec. no matter where the switch is set, and it doesn’t always work when you call in for messages.” On the “‘best buy” side, Quey's pleased with his 1985 Hesston 4650 16 by 18-in. 2-string square baler, ‘It makes uniform straight bales with no curves or ‘rainbows’. Makes 100-lb. bales that pick up easily with an automatic balewagon. You don't have to close it up to move down the road and it runs quiet and is easy to work on. Doesn't require the horse- power of our New Holland 286, Great dealer service, too.”

New Holland 29D tractor

0 Best Buys1 Worst Buy
Worst Buy
Clifford Burke, Homestead, Fla. · Vol. 27, No. 3 (2003), p. 13

“My 2002 New Holland 29D tractor is well built, easy to service, and comfortable to operate.

“My 2002 Sears Craftsman Robo Grip pliers is my worst buy. It’s a great idea but is poorly made. It twists and bends if any pressure is applied.”

New Holland 301

1 Best Buy0 Worst Buys
Best Buy
Steve Dornbierer, New Ringgold, Penn. · Vol. 8, No. 5 (1984), p. 13

Steve Dornbierer, New Ringgold, Penn.: Steve's pleased with his 'best buy" New Holland 301 liquid manure spreader, 'No major problems. Spreads a nice, even pattern."

New Holland 303

1 Best Buy0 Worst Buys
Best Buy
Paul Hess, Drumore, Penn. · Vol. 8, No. 5 (1984), p. 15

Paul Hess, Drumore, Penn.: He's had trouble with a New Holland 303 liquid manure spreader with 3260 gal. capacity. "The spreader had problems on its first load when the brakes failed to function, causing a jacknife and pushing the front two bearings out of their mountings. The second day was a repeat of the first except we hauled nine loads before the brakes quit. The next problem was in the driveline which is equip- ped with a heavy number 60 chain running at 1,000 rpm's. The chain overheated and disintegrated, and when it spread it was disgustingly slow. The dealer ignored our com- plaints. Over the next six months we tried a double number 60 chain but finally ended up making our own di- rect drive to the spreader with two universal joints. Now we could haul manure trouble-free if the brakes would work. "Our 45 hp. Deere 2150 tractor with MFWD and a 175 loader is a best buy. The MFWD is a real plus espe- cially when conditions are sloppy or the bucket is full. We stacked up 600 hrs. in one year doing everything from raking hay, spraying, and scrap- ing manure to moving snow and cleaning the mud away from the spring house after a flood, It's fun to drive and easy on fuel, ordinarily using less than 1 gal. per hour. 'Another best buy is our 1984 Honda Big Red 3-wheeler. It's very useful and dependable and the re- verse gear is handy when pulling a trailer."

New Holland 305

1 Best Buy0 Worst Buys
Best Buy
Galen Rozenboom, Sully, Iowa · Vol. 15, No. 4 (1991), p. 12

Galen Rozenboom, Sully, Iowa: “It does an excellent job of spreading any type of manure from hard-frozen to sloppy. Works great,” says Galen, owner of a 1990 Ford New Holland 305 side delivery manure spreader.

New Holland 306

1 Best Buy0 Worst Buys
Best Buy
Philip Geissen, Moulton, Texas · Vol. 18, No. 6 (1994), p. 14

Philip Geissen, Moulton, Texas: Philip likes his New Holland 185 box manure spreader and New Holland 306 side delivery spreader. "Both spreaders work great. No problems with either one. The side delivery model does an excellent job of spreading wet manure."

New Holland 308

1 Best Buy0 Worst Buys
Best Buy
Leon Jones, Britton, S. Dak · Vol. 19, No. 3 (1995), p. 15

Leon Jones, Britton, S. Dak.: A 1993 New Holland 308 manure spreader is one of Leon's “best buys.” “It does a very even job of spreading, no matter whether it's handling liquids or solids with a moderate amount of straw.” On the negative side: “We've put 3,600 hours on our 199] Case-IH 7140 front wheel assist tractor, In four years, we've had to replace both front and rear wheel seals, completely overhaul the engine after it threw a rod, and fix a slipping transmission, We've also had to replace both load boxes on the 3-pt. hitch. Fortunately, our dealer and the company have been very good about fixing things under warranty. The most we've spent is $250. However, it has cost us a lot in time and inconvenience.”

New Holland 320

0 Best Buys1 Worst Buy
Worst Buy
Verle Holdeman, Halstead, Kan. · Vol. 11, No. 5 (1987), p. 13

Verle Holdeman, Halstead, Kan.: “We like our 1980 1460 International combine so we recently purchased another one. Has plenty of power and gives a good, clean grain sample, “We also like our 1985 New Holland 320 baler. Makes good, solid, even-length bales and we've had little trouble with it. “Our worst buys are tools from Harbor Freight & Salvage and Massey Ferguson combines. The tools are poor quality. The jaws break off on the pipe wrenches and adjustable wrenches. As for the combine, I can’t keep it running more than a day or two without trouble.”

New Holland 327 manure spreader

1 Best Buy0 Worst Buys
Best Buy
Todd Lemke, Watkins, Minn. · Vol. 44, No. 3 (2020), p. 13

“I purchased a used New Holland 327 manure spreader after my 1950’s Minnesota spreader had a bearing fail and I didn’t have time to find parts. It’s worked great and I appreciate the different speeds I can run the apron. I’ve only had to replace two chain links and a few rivets. Great spreader for my small operation.”

New Holland 328

1 Best Buy0 Worst Buys
Best Buy
John S. Dietz, York, Penn. · Vol. 11, No. 4 (1987), p. 13

John 1975 New Holland 328 manure spreader as “best buys”. “The milkers are easy to handle and do a good job, and the spreader spreads well.”

New Holland 33D tractor

1 Best Buy0 Worst Buys
Best Buy
John A. Luhrs, Bedford, Va. · Vol. 43, No. 1 (2019), p. 13

“My 2014 Dixie Chopper Silver Eagle zero-turn riding mower cuts great. No problems. (www.dixiechopper.com; ph 765 246-7737).

“I also like my 2001 New Holland 33D tractor. Works great.”

New Holland 352 grinder-mixer

0 Best Buys1 Worst Buy
Worst Buy
Frank Roudebush, Xenia, Ohio · Vol. 14, No. 6 (1990), p. 14

Frank Roudebush, Xenia, Ohio: Frank's “worst buy” is his New Holland 352 grinder-mixer. “A bearing wears out in the hammer mill every year. The dealer says it shouldn’t do that and then walks away from me. I've had three different dealers in this area over the years and it’s always the same story.” Frank likes his 1989 Deutz-Allis 7085 tractor. “It started easy last winter in temperatures of 10 degrees above zero and is easy on fuel.”

New Holland 355

1 Best Buy0 Worst Buys
Best Buy
Randy Lacy, McHenry, Md. · Vol. 13, No. 1 (1989), p. 12

Randy Lacy, McHenry, Md.: Randy’s had trouble with his 1986 Polaris Trail Boss 250 4-wheeler ATV. “After two years of hard every-day use, the drive chain jumped the front drive sprocket, breaking off three teeth and jamming into an idler roller. The dealer said he'd have to order the sprocket and asked me if I had an account with Polaris. When I said ‘no’, he said I'd have to pay for the part in advance before he’d order it and that the part would take a week to arrive. The 4-wheeler is still sitting.” On the “best buy” side, Randy nominates his Agrimetal 530 motorized feed cart. “It's reasonably priced and simple to oper ate. After seven months of twice-a-day use, the only problem has been a_ fouled sparkplug. The Honda gas engine starts with one pull almost every time. “T also like my Surge mini-orbit milkers. They’re lightweight and milk the cows fast and evenly.” He says he’s also pleased with his 1988 New Holland 355 grinder/mixer featuring computerized weigh scales, “The scales are so accurate that I can buy protein supplement in bulk and save money. Also, the hammermill has plenty of capacity.”

New Holland 357

1 Best Buy0 Worst Buys
Best Buy
Ron Gusella, Carstairs, Alberta · Vol. 18, No. 2 (1994), p. 15

Ron Gusella, Carstairs, Alberta: Ron's “best buy” is his New Holland 357 grinder mixer mill equipped with a bale feeder. “We use it to feed 50 to 60 calves every winter. It lets us vary the kind of grains we feed and add supplements. We can grind straw or hay and add it to the grain or mix in salt, limestone, dry molasses, etc. When we purchased this machine we hard surfaced the hammers on all edges. We've used it for many years without any problems and still haven't turned the hammers over. We use a 10-ft. long, 4-in. dia. auger equipped with an orbital motor to feed grain into the machine. The motor runs off tractor hydraulics and its speed is regulated by a valve. It has worked perfect for us.”

New Holland 375

1 Best Buy0 Worst Buys
Best Buy
William Miller, Ashton, Idaho · Vol. 19, No. 3 (1995), p. 15

William Miller, Ashton, Idaho: William's pleased with his New Holland 375 14 by 18-in. square baler. “It makes good uniform bales and ties them tight. We've made 36,000 bales with it and it's been trouble-free. “My Pioneer Farm & Ranch chain saw didn’t work very long before [had to have it completely overhauled. Of course, the warranty had just expired so I had to pay for the repairs. This saw will never hold a candle to the Homelite XL 12 saw I’ve had for 30 years. It’s still going strong.”

New Holland 393

0 Best Buys1 Worst Buy
Worst Buy
Ben Weich, Hanna, Alberta · Vol. 13, No. 5 (1989), p. 14

Ben Weich, Hanna, Alberta: “Nothing on it works,” says Ben about his “worst buy” New Holland 393 tub grinder. “The hammer mill is too small for the tub grinder and in the wrong place in relation to the tank. Also, the mill has the wrong kind of bearings.” R.F, Maddocks, Surrey, British Columbia: R.F. says his “best buy” is his AIoward Paraplow. “We grow vegetables and the way we work the land is hard on the soil structure. Soil compaction, combined with our high rainfall, can cause the land to puddle and flood very easily. This subsoiler can be adjusted to do the work of a chisel plow, yet it provides better drainage. It also doesn’t bring up lumps.”

New Holland 3930 4-WD loader tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Ernest B. Copley, Portland, Tenn. · Vol. 35, No. 4 (2011), p. 14

“I like my 2006 Ford F-250 XLT Super Duty extended cab pickup equipped with a 5.4-liter gas engine and automatic transmission. It has about 22,000 miles on it. It came with a B&W Hide-A-Ball and tow package and has no trouble handling our travel trailer and gooseneck trailer.

“I like my 1997 New Holland 3930 4-WD loader tractor equipped with a diesel engine and shuttle shift transmission. I use it with a Woods 5-ft. tiller and 6-ft. rotary cutter. The tractor’s original battery lasted 13 years.

“My 2007 Husqvarna 350 chainsaw had a fuel line leak and a fuel tank leak from the factory. I had to pay the labor for the repair work because a year had passed before I took it in. The saw works good now.

“I like my 2009 Dixon zero turn riding mower equipped with a 26 hp Briggs & Stratton engine and a 50-in. deck. I show this machine no mercy but it’s built strong. My wife can operate it better than I can.”

New Holland 40 1 000 rpm

1 Best Buy0 Worst Buys
Best Buy
Dale Grahl, Eden, Wis. · Vol. 41, No. 2 (2017), p. 13

Seven years ago Dale bought a used New Holland 40 1,000 rpm silo blower. “This blower will fill a 110-ft. tall silo like no other I’ve seen. The company doesn’t make this blower any more, but I’ve heard another company is going to start making it again. It uses a direct drive system with no gearbox and requires a tractor with less power than other blowers on the market.”

New Holland 40 Silage Blower

1 Best Buy0 Worst Buys
Best Buy
Dale Grahl, Eden Wis. · Vol. 45, No. 5 (2021), p. 12

“My New Holland 40 Silage Blower with a 1,000 rpm blower, now made by Fieldline in Lancaster, Penn., can fill a 110-ft. silo without plugging. The direct drive requires less power.”

New Holland 425

1 Best Buy0 Worst Buys
Best Buy
Noah Kinsinger, Oakland, Md. · Vol. 8, No. 5 (1984), p. 12

Noah Kinsinger, Oakland, Md.: "We like our New Holland 425 diesel skid steer loader. It uses just % gal. fuel per hour and it has plenty of power, | also like our Massey Fergu- ar re, linate son 124 baler. We've never had a breakdown in 11 years. It misses very few bales."

New Holland 426

1 Best Buy0 Worst Buys
Best Buy
Tim Jenkins, Quincy, Wa · Vol. 19, No. 3 (1995), p. 15

Tim Jenkins, Quincy, Wa.: Tim nominates his 1992 New Holland 426 baler as “best buy”, “We make about 17,000 bales a year with it and all we've ever had to do is routine maintenance. I don’t think it’s missed tying more than three bales since we've had it.”

New Holland 45

1 Best Buy0 Worst Buys
Best Buy
William Flohr, Thornton, W.V. · Vol. 13, No. 1 (1989), p. 14

William Flohr, Thornton, W.V.: William nominates his New Holland 45 1 mower as his “best buy”. “I owned a New Holland Pe een Bs t Buys ge) mower for 18 years and this new model is living up to my expectations.”

New Holland 450 Utility round baler

1 Best Buy0 Worst Buys
Best Buy
David Van DeWeert, Geneseo, N.Y. · Vol. 41, No. 6 (2017), p. 15

“My Case IH Magnum 7110 is a simple tractor with lots of power, and it’s easy to service. However, parts from the company are expensive. I can buy filters for half the price at NAPA Auto Parts. For example, an oil filter that costs $50 at Case IH sells for $25 at NAPA.

“My New Holland 450 Utility round baler is designed to make 4 by 5-ft. bales weighing up to 1,000 lbs. However, the computer on it never worked right. This is a small baler so I have to baby it. My advice is to buy a bigger baler - you’ll be money ahead.”

New Holland 455

0 Best Buys1 Worst Buy
Worst Buy
Tom Des Jarlais, Oconto, Wis. · Vol. 18, No. 5 (1994), p. 16

Tom Des Jarlais, Oconto, Wis.: “It does en ok a rst Buys US page) an excellent job in heavy trash,” reports Tom, pleased with his Brillion 7-shank coulter chisel plow, “The hydraulic control on the disk gang is an option that’s well worth the money. I can set the disk to work shallow in bean stubble or deep in corn stalks. It pulls easy. can go 5 mph using a 110 hp tractor. “My 1989 New Holland 455 skid steer loader is my worst buy. The Kubota 3-cyl. diesel engine has been overhauled twice in “My dealer doesn't even want to see it.” 1,500 hours. The next time it needs to be worked on I'll replace it with a gas engine. My dealer doesn't even want to see it.”

New Holland 456 sickle mower

1 Best Buy0 Worst Buys
Best Buy
Loring Kufahl, Wheaton, Kansas · Vol. 32, No. 6 (2008), p. 15

Loring nominates his 2008 Chevrolet Duramax 3/4-ton heavy duty pickup equipped with an Allison transmission as his “best buy”. “This pickup has 365 horsepower and 660 lbs. of torque, which is enough power to pull any trailer that we have. It gets 15 to 16 mpg, which is okay but not as good as the 2001 Chevrolet Duramax I traded in. It had 96,000 trouble-free miles.”

On the minus side, he lists his 2007 New Holland 456 sickle mower. “The pulley that hooks up to the counterbalance shaft that drives the sickle and shaft wasn’t machined right. As a result, it came loose and required $770 worth of parts and labor to fix. The dealer ended up fixing the mower at no cost, which I really appreciate.”

New Holland 462

1 Best Buy0 Worst Buys
Best Buy
Glen Smith, Ferndale, Wash. · Vol. 8, No. 1 (1984), p. 10

Glen Smith, Ferndale, Wash.: Glen's had trouble with his ‘ArtsWay Dion Feeder wagon. The beaters on this box are so small that green feed wraps around them and you have to shut it down to clean them off. I don’t know why the company doesn't put beaters in these wagons that won’t wrap. Dealer service is rotten.” He's pleased with his “best buy" New Holland 462 disc mower. “The mower will cut the thickest tangled grass without plugging. I can cut 20 acres in 24% hours without stopping. It's extremely well-built and doesn't take more than 40 hp. to run. Dealer service is good,” to hook up, easy to operate and a pleasure to work with,” says Ralph.

New Holland 4630 tractor

1 Best Buy0 Worst Buys
Best Buy
Ronnie Muse, Rose Hill, Va. · Vol. 28, No. 5 (2004), p. 15

“My 1979 New Holland 4630 tractor is highly maneuverable and just the right size for everything I do.”

New Holland 465

1 Best Buy0 Worst Buys
Best Buy
Perry J. Deem, Schulenburg, Texas · Vol. 18, No. 4 (1994), p. 15

Perry J. Deem, Schulenburg, Texas: A 1993 Ford New Holland 465 disc mower is Perry's “best buy”. “In previous years we used sicklebar mowers or haybines to cut hay. But increasing problems with fire ants and Bahia grass has made cutting hay areal headache. This mower slices through both with ease. I'm well pleased with it.”

New Holland 467

1 Best Buy0 Worst Buys
Best Buy
R.E. Bishop, Linesville, Penn. · Vol. 8, No. 4 (1984), p. 12

R.E. Bishop, Linesville, Penn.: “I bought a new Deere 2640 tractor in 1976. It was poorly designed and “T ran it 1,600 hrs. and it cost me over $3.00 in repairs for every hour I used it.”’ poorly assembled. I ran it 1,600 hrs. and it cost me over $3.00 in repairs for every hour I used it. “ have a 6,000 Ford ] boughtinew in 1967 that is still going strong with about 12,000 hrs. I bought a New Holland 467 Haybine that I've used 10 years and all I've had to replace is one bearing. I also have a Farmhand 810 grinder-mixer that I've used 12 years and have only replaced a couple bearings. All of these are very good machines.”

New Holland 469 haybine

1 Best Buy0 Worst Buys
Best Buy
Stanley Overmyer, Park Rapids, Minn. · Vol. 23, No. 5 (1999), p. 14

“We’re well pleased with our New Holland 853 round baler which we bought used. It’s easy to maintain and adjust and starts a bale in any size windrow.

“We’re happy with our New Holland 469 haybine which we bought used.”

New Holland 479 Haybine floats right

0 Best Buys1 Worst Buy
Worst Buy
Stephen Esposito, Newton, N.J. · Vol. 14, No. 1 (1990), p. 14

Stephen Esposito, Newton, N.J.: Stephen's “best buy” is his 1983 Volkswagen diesel pickup, “It gets 50 mpg and has outlasted two Chevrolet C-10 pickups. “My 1988 New Holland 479 Haybine floats right over rocks.” On the negative side, “My ‘Field Fresh’ propionic acid hay preservative application system from Agway is poorly designed. The spray nozzles in front of the finger feed on the baler don’t spray the hay thoroughly, resulting in moldy hay and high curing temperatures. Also the acid aroma causes breathing problems and teary eyes for kids loading hay in the barn. There’s no factory backup. The best part of the entire kit is the moisture probe.”

New Holland 4835 4-WD tractor equipped

1 Best Buy0 Worst Buys
Best Buy
George C. Wissinger, Huntington, Ind. · Vol. 28, No. 3 (2004), p. 14

“My 1997 New Holland 4835 4-WD tractor equipped with a left hand reverser and an ALO 720 front-end loader is my best buy. I use it to pull a New Idea 485 4 by 6 hydraulic-tie round baler, which is also a best buy. I can’t say enough good things about these two machines.”

New Holland 489 Haybine

0 Best Buys1 Worst Buy
Worst Buy
Ernest R. Norman, Jewett City, Ct. · Vol. 20, No. 6 (1996), p. 16

Ernest has had problems with his 1991 New Holland 489 Haybine. “The pulley drive reel split, two reel bars broke, a shaft on the gearbox broke, a chain leading to the gearbox constantly breaks, and the chain idler broke off the frame. Over the years I or my father have owned New Holland 460, 469, and 479 haybines. We used the 479 for 14 years and had very few problems with it.”

New Holland 492

1 Best Buy0 Worst Buys
Best Buy
Perry Hathaway, Claypool, Ind · Vol. 19, No. 1 (1995), p. 15

Perry Hathaway, Claypool, Ind.: “I’ve mowed 300 acres of hay a year since I bought my New Holland 492 Haybine in 1991. The only thing I’ve had to do is replace one guard and one sickle section, However, the Goodyear tires on the haybine left a lot to be desired. I had to put “The only thing I've had to do is replace one guard and one sickle section.” tubes in them because they had slow leaks.”

New Holland 495 disc mower

1 Best Buy0 Worst Buys
Best Buy
Steve Korver, New Oxford, Penn. · Vol. 14, No. 5 (1990), p. 14

Steve Korver, New Oxford, Penn.: Steve's had good luck with his 1989 Case 1840 skid stecr loader. “I use itevery day on my dairy and turkey farm. It starts easy in cold weather and speeds up chores and manure hauling. “My 1989 Deere 1360 disc mower conditioner is another best buy. It cuts down and tangled hay faster than the New Holland 495 disc mower it replaced,” William McGuire, Maroa, Ill.; “It's the best vehicle I’ve ever owned,” says William about his 1990 Dodge Ram 3/4-ton pickup equipped with a Cummins dicscl engine. “Starts good in all weather, gets good fuel mileage, and seems to have almost unlimited power. “My Deere 9500 combine is another best buy. It works perfectly, is easy to operate, and does the best job of harvesting I’ve ever seen.”

New Holland 499 Haybine

1 Best Buy0 Worst Buys
Best Buy
Ardell Amundson, Dovray, Minn. · Vol. 21, No. 1 (1997), p. 15

“We like our New Holland 499 Haybine. No problems after three years.”

New Holland 50/50 4-WD tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Donald Brown, Amissville, Va. · Vol. 36, No. 4 (2012), p. 14

Donald’s happy with his 2009 New Holland 50/50 4-WD tractor equipped with a floor shuttle transmission. “It’s a dependable, well-built tractor with a good view from the cab and simple features. At times the brakes make a loud rubbing noise, but I can live with that.

“My New Holland TN 60D 4-WD tractor has a left hand shuttle that goes into gear only when it wants to, which makes it a real nuisance. It once left me stranded in the middle of the road. I’ve spent about $2,000 at my dealer trying to solve the problem but nothing has helped. Also, the tractor doesn’t have enough road speed and power. If you want to do anything other than work a garden, this tractor is underpowered.”

New Holland 514 manure spreader heads

1 Best Buy0 Worst Buys
Best Buy
Thomas Yoder, Haven, Kan · Vol. 14, No. 1 (1990), p. 13

Thomas Yoder, Hayen, Kan: A 1988 New Holland 514 manure spreader heads Thomas’ “best buy” list. “It does a very even job of spreading and is simple to use and trouble-free. The sides and floor are covered by a lifetime warranty regardless of how many times it changes hands,”

New Holland 519

1 Best Buy0 Worst Buys
Best Buy
D.E. Thesen, Abbotsford, B.C. · Vol. 13, No. 3 (1989), p. 14

D.E. Thesen, Abbotsford, B.C.: His “best buy” is his New Holland 519 manure spreader, “During five years of constant use it’s never broken down and I like its versatility. I use it not only for spreading manure butalso for hauling com silage and fresh chopped grass, as well as for feeding and mixing silage and delivering top soil.”

New Holland 553

1 Best Buy0 Worst Buys
Best Buy
Wayne Harter, Wakarusa, Ind. · Vol. 18, No. 5 (1994), p. 14

Wayne Harter, Wakarusa, Ind.: A 1990 Case-IH 5130 tractor heads Wayne's “best buy” list. “It handles beautifully and is a dependable, economical tractor, We've put almost 3,000 hours on it. “My 1991 New Holland 553 skid steer loader’s been in the shop or repaired on my farm an average of every SO hours. It has less than 1,000 hours. The biggest problem is with leaky seals or O-rings. It costs $130 to $180 each time to repair. I like the Kubota diesel engine, but not the problems.”

New Holland 555 skid steer loader

0 Best Buys1 Worst Buy
Worst Buy
Don Maxwell, Geneseo, N.Y. · Vol. 21, No. 4 (1997), p. 15

Don’s impressed with his 1992 Bobcat 843 skid steer loader. “After 4,800 hours all I’ve had to replace were four hydraulic hoses that had rubbed together and worn through.

“My 1987 New Holland 555 skid steer loader is my worst buy. The wheel seals have had to be replaced every year. The brakes are poorly designed. The Perkins engine was also a disappointment.”

New Holland 5630 4-WD tractor

0 Best Buys1 Worst Buy
Worst Buy
Surgoinsville, Tenn. · Vol. 29, No. 6 (2005), p. 14

“My three AGCO Allis 5670 4-WD tractors are all best buys. They range from 4 to 8 years old. These tractors have air-cooled engines that are fuel efficient.

“My 1996 New Holland 5630 4-WD tractor is my worst buy.”

New Holland 595 big square baler

1 Best Buy0 Worst Buys
Best Buy
Bernard Fehringer, Sidney, Neb. · Vol. 35, No. 4 (2011), p. 15

“I like my early 2000’s New Holland 595 big square baler, which I bought used with 3,000 bales on it. It makes 3 by 4-ft. bales. I’m sure the original owner traded this baler in because he couldn’t make it work. The problem was he didn’t keep it lubricated. The tucker fingers need regular greasing and are hard to see without consulting the operator’s manual. Also, the autolubes use a lot of oil so you have to keep refilling the reservoir often. Ever since I fixed the problems and lubed this baler properly, it makes bales without a single missed tie or other malfunction.”

New Holland 6050 front wheel assist

1 Best Buy0 Worst Buys
Best Buy
Larry Flesla, Ridgeville, Ind. · Vol. 35, No. 1 (2011), p. 14

A 2010 New Holland 6050 front wheel assist loader tractor rates as Larry’s “best buy”. “I like the fact that it doesn’t have much in the way of electronics - just the push button on the powershift transmission and the reverser. It’s a smooth-running, comfortable tractor for its size. So far, so good.”

New Holland 615 3-pt mounted disc mower

1 Best Buy0 Worst Buys
Best Buy
Jim Heyboer, Nashville, Mich. · Vol. 29, No. 5 (2005), p. 14

“My New Holland 615 3-pt. mounted disc mower is my best buy. Over the years we’ve had four different New Holland mowers and have mowed close to 20,000 miles of roadsides in our county. We’ve put on more than 8,000 miles on this model in just two summers. Some parts on it have worn out, but that’s to be expected because we mow in road gear. Overall, they’ve been good units.”

New Holland 616 disc mower

1 Best Buy0 Worst Buys
Best Buy
Jimmy R. Offutt, Stamping Ground, Ky. · Vol. 37, No. 1 (2013), p. 12

“I bought it in 2003 from someone who thought it was worn out. But I’ve used it to mow a lot of hay over the past 9 years with no problems except when I tried to cut through a rock,” says Jimmy about his New Holland 616 disc mower.

New Holland 630

0 Best Buys1 Worst Buy
Worst Buy
Donald Sears, Carlisle, Ky · Vol. 19, No. 2 (1995), p. 14

Donald Sears, Carlisle, Ky.: “The worst buy I ever made was my New Holland 630 round baler that I bought new in 1990, Both outside belts would always run up on top of the inner belts. I changed all the belts and that still didn’t help. Finally, aroller swallowed one of the belts and that was the straw that broke the camel's back. I'd had the machine only five days and had worked on it four of them. So I loaded it up, took it back to the dealer about 35 miles from here, and told him I'd have it fixed or I'd have my money back. He gave me my money back. “The next day, I bought a new Deere 375 baler, which is one of my best buys. It’s been trouble-free, runs quiet, and looks great.”

New Holland 630 4

1 Best Buy0 Worst Buys
Best Buy
Eldon Reiners, Bucyrus, Mo. · Vol. 28, No. 1 (2004), p. 14

“Our 1990 Deere 170 lawn mower works great. Our New Holland 630 4 by 4 round baler is a best buy. Our late model Allis Chalmers D14 is an outstanding tractor.”

New Holland 640 Silage Special round baler

1 Best Buy0 Worst Buys
Best Buy
Martin MacLeod, Cardigan, P.E.I., Canada · Vol. 28, No. 4 (2004), p. 14

“We like our 2001 New Holland 640 Silage Special round baler.

“We recently purchased a 2003 Zetor 7745 4-WD loader tractor and have more than 1,400 hours on it. It seems like a good tractor. All the controls on it are mechanical.”

New Holland 648 Silage Special round baler

1 Best Buy0 Worst Buys
Best Buy
Bill Smyth, Langley, B.C. · Vol. 25, No. 4 (2001), p. 17

Bill’s impressed with his New Holland 648 Silage Special round baler. “I’ve used or tested numerous round balers over the past five years, and this one consistently makes the best bales without needing much operator intervention.”

On the “worst buy” side, he lists his Cub Cadet riding mower. “The belts keep breaking and the dealer can’t do anything about it. The maintenance required on this machine is expensive and time consuming.”

New Holland 6635 tractor equipped

0 Best Buys1 Worst Buy
Worst Buy
Tony Smith, Martin, Ga. · Vol. 27, No. 4 (2003), p. 14

Tony says his 1997 New Holland 6635 tractor equipped with a cab is his “worst buy”. “I bought it used in December 2000 from a dealer who was the only previous owner and had used it on his own farm. At the time, the air conditioning appeared to work okay. Of course, it doesn’t take a lot of air conditioning in December to be comfortable. When hot weather came around I realized that the air conditioner wasn’t adequate for any temperature above 70 degrees. I took the tractor back but they couldn’t find anything wrong with it. They performed some normal maintenance work which cost $200 to $300. Since then I’ve had several other people look at it but they couldn’t find anything wrong with it, either, except that it won’t cool the cab adequately. All together I’ve spent almost $1,000 on it, but the air conditioner still isn’t working right. The air temperature seems to be cool enough but there just aren’t enough cfm’s coming out of the blower. All the filters and ductwork, etc., have either been replaced or cleaned out.

“Regardless of the temperature, if the sun’s shining you almost always need air conditioning. I guess I can plan on sweating it out again this summer unless someone can come up with a solution. If you’ve experienced this same problem, please email me ([email protected]).”

New Holland 672 disc mower

1 Best Buy0 Worst Buys
Best Buy
James Rainey, Glen Allen, Mo. · Vol. 37, No. 2 (2013), p. 14

“Our 2010 New Holland 672 disc mower cuts great and doesn’t pull the tractor to death like others we’ve owned. It’s a great machine.

“Our 2012 Dodge Grand Caravan has come close to getting us killed. When we step on the accelerator it hesitates, which makes merging into traffic dangerous. When driving on hills the engine just keeps pulling down, and then when it does accelerate it jerks you and sounds like an airplane taking off. We’re Chrysler fans and all our trucks and other vehicles are Chryslers, but in the future, we’ll think hard before buying from them again. The dealer won’t do anything to help.”

New Holland 7060 baler

1 Best Buy0 Worst Buys
Best Buy
Phillip Matthews, Laingsburg, Mich. · Vol. 34, No. 2 (2010), p. 14

Phillip bought an Anderson Hybrid round bale wrapper four years ago and a New Hol-land 7060 Silage Special baler equipped with Roto Cut two years ago. He’s happy with both of them. “The bale wrapper has saved me from losing hay cutting after hay cutting and results in a much better feed. We try to wrap bales that have 20 to 30 percent moisture, which makes great hay. I can’t build a barn for what it costs to wrap our bales.

“The New Holland 7060 baler has a lot of capacity and makes firm bales. I couldn’t live without the Roto Cut feature. It cuts the hay just enough so the bales pack tighter, and so that when they’re opened they tend to fall apart nicely for feeding.”

New Holland 7090 round baler

0 Best Buys1 Worst Buy
Worst Buy
Tony Berry, Olmstead, Ky. · Vol. 37, No. 4 (2013), p. 12

Tony’s disappointed with his 2009 New Holland 7090 round baler. “We used this machine to make about 200 bales before the belts on the outer sides of the baler started flipping over, and it was difficult to turn them back over into their normal position. To prevent the problem, we had to slow down our ground speed and move from side to side as fast as we could in order to keep the belts from flipping over.

“Later on we were told the outside belts had stretched more than the inside belts, which caused the slip clutch to slip when baling somewhat moist hay. When that happened we had to dump the bale even though it wasn’t tied. After two years I finally traded for a Deere 568 baler and am well satisfied with it.”

New Holland 7220 discbine

1 Best Buy0 Worst Buys
Best Buy
Joseph Csencits, Danielsville, Penn. · Vol. 44, No. 4 (2020), p. 13

Joseph is happy with his 2012 New Holland 7220 discbine. “It cuts through everything - wet, dry, down, or thick. My cutting time has been cut by 2/3 compared to the New Holland 472 haybine I had before.”

On the negative side, the Victor Electronic rat trap I purchased did not kill anything. It was 29 bucks down the rat-hole.”

New Holland 7230 discbine

1 Best Buy0 Worst Buys
Best Buy
Larry Shepler, Reynoldsville, Penn. · Vol. 42, No. 2 (2018), p. 12

Larry’s the satisfied owner of a 2014 New Holland 7230 discbine. “This is our third New Holland discbine, starting with a model 411 and then a 1411. We’ve had great luck with all of them, but it’s nice to see that as they get older they get better. Each new model seems to outperform the one before it. The 7230 mows and dries hay fast and is very reliable.

“Our 2015 Krone Swadro 42T 3-pt. mounted rotary rake is well constructed but hard to level, and it does a poor job when going through dips and hollows. It misses hay at the bottom of a dip, but unfortunately rakes in all the rocks on the edges. Our Vicon 423T rake follows the contours much better but is poorly constructed.”

New Holland 7740 tractors

1 Best Buy0 Worst Buys
Best Buy
James Allen, Molalla, Oregon · Vol. 28, No. 6 (2004), p. 12

“I’m well pleased with my two New Holland 7740 tractors. One is a 4-WD and the other a 2-WD. No problems.

“My 1999 Dodge 4-WD diesel pickup has more than 105,000 miles on it with no problems. It’ll pull a gooseneck trailer hauling 12,000 lbs. with ease.”

New Holland 778 skid loader equipped

1 Best Buy0 Worst Buys
Best Buy
Clarence Maupin, Scotts Bluff, Neb. · Vol. 33, No. 5 (2009), p. 14

“In 1978 I bought a New Holland 778 skid loader equipped with oversized tires and three basic attachments - a light materials bucket, a heavy material bucket, and a manure-utility fork. Since then I’ve built five or six other attachments that add a lot to the machine’s capabilities.

“I feed 300 cattle annually and used this loader to handle all my feed and manure and to do construction work. I still use it today on my small acreage, working for neighbors and doing volunteer work for church and a local college. Many people have tried to buy this skid loader from me, but I tell them that next to my wife it’ll be the last thing to go.

“After I retired I bought a 1995 Yardman 15 hp, 42-in. riding mower which I like. I also use it to do volunteer work at the church and college. It has about 2,500 hours on it

“I also own a 2007 Cub Cadet 1046 20 hp lawn tractor equipped with a 46-in. deck that I really like. I bought the optional grass catcher for the machine. However, I’m disappointed that such a fine mower still uses basically the same grass catcher that’s on my 1995 Yardman. I think if they’d come up with a grass catcher with an auxiliary blower they could sell a lot more of these tractors.”

New Holland 780 baler

1 Best Buy0 Worst Buys
Best Buy
Harold G. Painter, Springview, Neb. · Vol. 33, No. 2 (2009), p. 15

“My 2000 New Holland 1475 swather has had no problems. It does a good job in all kinds of crops whether it’s 6 to 8-ft. tall sudan or 8-ft. high meadow hay.

“I also like my 2005 New Holland 780 baler. No problems.

“My 2004 Husqvarna 345 chainsaw is my worst buy. It worked fine for three years until the blade oiling system quit working. The dealer worked on the problem for five or six months with no luck. I took the saw to another man who, after three or four months, finally got the oiling system to work a little. However, he accidentally broke the clutch. I took the saw back and he fixed it. Finally, I was able to start using my saw again last fall.”

New Holland 782

1 Best Buy0 Worst Buys
Best Buy
Troy Ingram, Franklinton, La. · Vol. 13, No. 6 (1989), p. 13

Troy Ingram, Franklinton, La.: A 1987 New Holland 782 silage cutter is Troy's “best buy”. “It’s a simple and rugged machine that’s easily maintained and serviced. With good maintenance it should last at least 10 to 12 years.”

New Holland 783 skid loader

1 Best Buy0 Worst Buys
Best Buy
Bob Schmidt, Holdingford, Minn. · Vol. 43, No. 2 (2019), p. 14

A cow-calf operator, Bob is pleased with his 1994 New Holland 783 skid loader. “I wanted a skid loader to make my work easier, and chose this model because of its long wheelbase and high lift boom. It’s a really tough machine with about 5,300 hrs. on it, but has been back to the dealer only once because of a hydraulic leak. I can use it with 11 different attachments.

“Three years ago I bought five 24-ft. long, free-standing steel corral panels made by Double J Mfg. (www.doublejmfg.com; ph 701 485-3511). These panels are built from 2 7/8-in. pipe and 1-in. sucker rod, and are built so tough that I can use them with my skid loader to construct handling facilities and also take them down without damaging anything. I’ve since bought 2 more 24-ft. panels as well as four 25-ft. windbreak panels. I set up the windbreak panels in my winter feeding pasture and use my skid loader to move them occasionally to spread out the manure, without ever having to get off the machine. My skid loader and these panels make a great team.”

New Holland 795 manure spreader

1 Best Buy0 Worst Buys
Best Buy
Steve Korver, New Oxford, Penn. · Vol. 24, No. 2 (2000), p. 17

“We like our 1995 New Holland 795 manure spreader which we bought used. It’s equipped with a tailgate and pan that works great for spreading poultry and dairy manure and also keeps it off roads. One problem was that the bolts that secure the box to the hitch broke through. It had to be reinforced.

“We use our 1989 Knight 2300 Reel Auggie to feed about 100 head of dairy animals a day. It’s easy to operate. We put some hay in it which mixed up well. It fluffs up the ration and doesn’t pack it like our old auger mixer did. Also, our old auger mixer couldn’t handle hay. It doesn’t take much horsepower to run, even when mixing hay.

“My 1990 Zetor 55 manure spreader is my worst buy. The spreader’s apron is made from log chain which has to be kept tight in order to keep it from rolling off the sprockets. The adjustment mechanism for tightening the chain is poor. The sprockets have points that fit into the chain links, and one of the points broke off. Unfortunately the sprockets are welded onto a steel shaft so I had to order an entire new shaft. It took four months to get it. One good thing is that the spinners spread poultry manure evenly.”

New Holland 8080 windrower equipped

1 Best Buy0 Worst Buys
Best Buy
James Konechne, Kimball, S. Dak. · Vol. 42, No. 3 (2018), p. 14

James is the owner of a New Holland 8080 windrower equipped with a 419 discbine head and windrow merger. “This machine cuts fast and does a good job, and the knives on it are easy to change. However, the windrow merger has had some problems. When it works, it works great. Merging two windrows saves wear and tear on our silage cutter. But everything has to be just right for it to work correctly. We finally discovered that one of the rollers on the machine was slightly bent, which prevented the drive belt from tracking true. Once we replaced the roller the machine worked much better.

“The windrower itself has had several hydraulic oil leaks. It seems like we’ve had to replace almost every O-ring on the machine, but with any luck that won’t be a problem any more.”

New Holland 8360 front wheel assist

1 Best Buy0 Worst Buys
Best Buy
Victor G. Barrick, Carlisle, Pa. · Vol. 24, No. 2 (2000), p. 14

“My 1998 New Holland 8360 front wheel assist tractor handles nice for a mid size tractor and is easy to service.

“I also like my Meyer rear-unload forage wagons. They unload fast and are built rugged.”

New Holland 85 hp tractor

1 Best Buy0 Worst Buys
Best Buy
Lane S. Bishop, Mineral Bluff, Ga. · Vol. 35, No. 2 (2011), p. 15

“Our 2008 New Holland 85 hp tractor is large enough for our 320-acre farm. We use it for haying and light grading work. Unfortunately, the tractor developed several small electrical problems and the dealer wouldn’t come out to fix them, even though I had no way to take the tractor to him.”

New Holland 8560 tractor

1 Best Buy0 Worst Buys
Best Buy
Winan McCall, Parker, Pa. · Vol. 23, No. 1 (1999), p. 15

Winan’s the owner of a “best buy” 1997 New Holland 8560 tractor. “I really like the transmission and all the controls.”

New Holland 8770 tractor

1 Best Buy0 Worst Buys
Best Buy
Jack Rigby, Blenheim, Ontario · Vol. 28, No. 5 (2004), p. 12

Jack’s impressed with his 2000 New Holland 8770 tractor. “It has a lot of power and is easy to handle. It has a super steering system that lets me make sharp turns. My only complaint is with the temperature control system on the air conditioner and heater. The blower always stays on, even though there are times when I don’t want it on.”

New Holland 885 skid steer loader

1 Best Buy0 Worst Buys
Best Buy
Joe Dustrude, Calhan, Colo. · Vol. 27, No. 1 (2003), p. 14

“My New Holland 885 skid steer loader is my best buy. It’s a joy to operate and really runs smooth. I’ve used four different New Holland skid loaders during the last 20 years and each one seems to work better than the one before it. I’ve operated Bobcat and Deere skid loaders on my job in town, but they can’t compare to the New Holland model.”

New Holland 8870 tractor

1 Best Buy0 Worst Buys
Best Buy
Allan Reinhard, Bucyrus, Ohio · Vol. 24, No. 3 (2000), p. 16

“My 1998 New Holland 8870 tractor has a lot of power, is easy on fuel, handles well, and has a comfortable ride. No problems.”

New Holland 9030 bi-directional tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Jack Robson, Deleau, Manitoba · Vol. 20, No. 3 (1996), p. 15

“My best buy over the past few years is my 1986 Massey-Ferguson 3545 tractor. After over 4,000 hours of use we’ve spent only about $4 on parts for a set of alternator brushes. The tractor is well balanced and handles all loads easily and economically. “OurFord New Holland 9030 bi-directional tractor equipped with a loader is a best buy as is our New Holland 116 haybine. Both do a good job with minimal maintenance.” On the negative side, he’s had problems with his Tonutti10-wheel 3-pt. V-rake. “It just won’t turn over a 16-ft. windrow without bunching and lumping. After just a few hours of use there’s so much play in the adjustment locks that it’s virtually unusable.”

New Holland 905 swather

1 Best Buy0 Worst Buys
Best Buy
Louis H. Mundt, Belt, Mont. · Vol. 16, No. 5 (1992), p. 13

Louis H. Mundt, Belt, Mont.;: “It’s the handiest vehicle on our ranch,” says Louis about his “best buy” 1992 Kawasaki KLF300 Bayou ATY. “It starts easy and is easy to handle. I use it every day for fixing fence, moving cows, putting out salt, hauling feed, spraying weeds, and going to and from fields. Itsavesa lot of gasand wear and tear on an expensive pickup. Even our dogs like to ride on it. “T used a 1966 New Holland 905 swather for 24 years to cut 500 acres a year over rough, rocky ground. It’s still in use on another farm. I sold it to get a swather equipped with a cab - a used 1978 model 1112. It’s an equally fine machine. “My 1978 New Holland 320 baler bales 2,000 square bales or more without missing a tie and is maintenance free. “My 1985 New Holland 840 round baler is also efficient and trouble-free.”

New Holland 912

1 Best Buy0 Worst Buys
Best Buy
J. Earl Anglen, Riverton, Wyo. · Vol. 18, No. 1 (1994), p. 16

J. Earl Anglen, Riverton, Wyo.: He's pleased with his Lester 40 by 64-ft. pole building. “We use it as a garage, storage shed, and shop. Ithas two 10-ft. wide, 14-ft. high sliding doors on one end and two rollup doors for cars and trucks on the other end. There’s plenty of room for vehicles, tractors, and shop tools. It’s completely insulated and has 20-ft. wide concrete approach pads, It’s an attractive building and useful, too. I'd recommend it to anyone. “My 1992 New Holland 1118 haybine windrower is a fine machine. My only complaint is with the foot valve that raises and lowers the header. To raise it have to push down a lot harder than I did with my old New Holland 912 windrower, Other owners of New Holland windrowers in this area all like their machines. They’re dependable and don’t require much maintenance.”

New Holland 9482tractor

1 Best Buy0 Worst Buys
Best Buy
David L. Brown, Beaver City, Neb. · Vol. 22, No. 5 (1998), p. 14

“This tractor carries on the Versatile tradition of simplicity, ruggedness, durability and ease of maintenance,” says David who is impressed with his 1998 New Holland 9482tractor.“It has excellent power and is easy to drive and service.

“We compared it with other tractors of comparable size and the 9482 seemed the clear winner. Its simplicity of design was the biggest selling point - no maze of electronic bells and whistles on this beauty.”

However, the company could continue to improve ease of shifting, make fewer areas to grease every day and make them more accessible, and the ladder into the cab could be located in a more convenient position, he adds.

New Holland 973 flex header

1 Best Buy0 Worst Buys
Best Buy
Larry Odell, Woodstock, Ontario · Vol. 49, No. 6 (2025), p. 15

“I bought an Echo 590 chainsaw three years ago that worked well until the clutch flew apart. As it was still under warranty, all parts were supplied at no charge. Thank you, Echo Corp.

“I have a New Holland 973 flex header that needed new floor panels. Our local dealer quoted me a price of $936 for one panel, which was ridiculous. I had a fabrication shop create three new panels out of stainless steel, resulting in a total cost of $240, which represents a savings of $2,568. It pays to look for alternatives.”

New Holland 975

1 Best Buy0 Worst Buys
Best Buy
Ed Moore, Marlinton, West Virginia · Vol. 11, No. 2 (1987), p. 14

Ed Moore, Marlinton, West Virginia: "A 2110 Ford 4-WD tractor is the best buy I've ever made. It'll go anywhere. I use it to feed cattle, haul big round bales, and rake and haul hay. Has a good hydraulic system." Ed names his Allis Chalmers 6060 as "worst buy”. "The hydraulic system is helpless. I've had it back to the dealer three times. Every time I get it back it's worse. The control valve opens too fast or not at all. I'm afraid to use it since it comes up all at once. It's bent lift arms and once threw a disk up on the back of the tractor." G. Gillis, Point Prim, Prince Edward Island: “Our best buy is a New Holland 975 combine bought in 1969. It cuts an average of 400 acres per year and is still going strong."

New Holland 988

1 Best Buy0 Worst Buys
Best Buy
Dick Kaptein, Gardenton, Man. · Vol. 9, No. 1 (1985), p. 13

Dick Kaptein, Gardenton, Man.: “I cut 100 acres of sorghum sudan grass 8 to 10-ft. tall without any trouble. I’m very pleased with the job it did," says Dick about his New Holland 988 Haybine.

New Holland BB940A large square baler

1 Best Buy0 Worst Buys
Best Buy
Jeremy Weaver, Penn Yan, N.Y. · Vol. 46, No. 6 (2022), p. 14

“My New Holland BB940A large square baler is a best buy. It has made more than 100,000 bales and is still going strong. My former boss had two identical balers which are also at around 100,000 bales and still going.

“Another best buy is my Deere 6920S IVT tractor which I use to run the NH baler. It has almost 18,000 hrs. and we haven’t touched the engine. The transmission was rebuilt at about 14,000 hrs. This tractor is tough as nails.”

New Holland Boomer tractor

1 Best Buy0 Worst Buys
Best Buy
Paul Reinders, Brookfield, Wis. · Vol. 38, No. 2 (2014), p. 14

“I had a problem with the brakes on my New Holland Boomer tractor with cab. The tractor wouldn’t stop right away when the brakes were applied. I had to start braking 10 ft. or so before I needed to stop. The company couldn’t help and even their engineers had the same problem. I finally traded for a Kioti.”

New Holland Boomer 250 diesel tractor

0 Best Buys1 Worst Buy
Worst Buy
Ed Stalcup, Chuckey, Tenn. · Vol. 38, No. 5 (2014), p. 15

“Back in 1983 I bought a Ford 2610 tractor. I’ve used it with a Bush Hog 2346 front-end loader to load oak logs onto my portable bandsaw mill. I’ve also used the tractor with a Hesston 5530 hay baler. I’m well satisfied with this tractor.”

He’s had problems with his 1999 New Holland Boomer 250 diesel tractor. “The fuel injection pump started leaking, but the company won’t provide any parts or information on how to repair it. Their only solution is for me to buy a new pump at a cost of about $1,000. We’ve tried installing many different O-rings with some success, but the pump still leaks a small amount. I think parts for older New Holland machines are too expensive.”

New Holland Boomer 33 tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Jim Havig, Osage, Iowa · Vol. 44, No. 5 (2020), p. 14

Jim is satisfied with his 2017 New Holland Boomer 33 tractor equipped with a front-end loader and grapple fork. “It has about 450 hrs. on it with no problems at all. It’s equipped with a hydrostatic transmission which makes it easy to get around. I use the grapple fork to move brush. The inside front wheel bearings on the tractor leaked at about 100 hrs., but the dealer made the repair at no charge.”

New Holland Boomer 45

1 Best Buy0 Worst Buys
Best Buy
Terry Herring, Crawfordville, Fla. · Vol. 49, No. 6 (2025), p. 15

Terry is the satisfied owner of a 2022 New Holland Boomer 45. “I use it more as a forklift than a tractor. I have almost everything around my place on pallets, and it’s a great help. We put our firewood in 270-gal. totes turned on their side, and we can take a full tote from the woodshed to the house with no problem. This is my fifth New Holland, and I find them to be very dependable.”

New Holland Boomer 4-WD tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Phillip L. White, Murfreesboro, Ark. · Vol. 27, No. 5 (2003), p. 15

“My 2001 Cyclone Rake vacuum-powered mulcher is my best buy (Woodland Power Products, Inc., 72 Acton Street, West Haven, Ct. 06516 ph toll free 888 531-7253). It hitches to your riding mower and turns it into an outdoor cleanup machine. The rig is powered by a 5 hp engine and comes with a 200-gal.collector bag and a big 7-in. dia. vacuum hose. The unit is said to provide 10 times the lifting power of mowers, and 5 to 10 times the capacity.

According to the company, dry materials, like leaves and sticks, are reduced 4 to 8 times in volume as they pass first through your mower blades, and then through a 3,500 rpm mulcher unit. You can use the machine to sweep and pulverize leaves or mow tall grass without clogging or stopping. The unit can pick up just about any lawn debris your mower blades can safely handle including sticks, twigs, and pine needles. The rig has a double-acting hitch design that allows you to steer into and out of tight areas without jackknifing. The unit unloads like a dump truck - all you do is lift and drive away.

“It leaves my lawn looking like a golf course. Pine cones, leaves, and grass clippings are all picked up. I used it last year to make a huge compost pile and have started another one this year.

“My 2001 New Holland Boomer 4-WD tractor equipped with a 45 hp engine is a best buy. It’s fast and efficient and has power to spare. To go forward or reverse you operate a foot pedal, which is a real time saver. This tractor has a very short turning radius and a deceptively powerful hydraulic system. It’s well made and has convenient controls. No problems.”

New Holland Boomer 8N

1 Best Buy0 Worst Buys
Best Buy
Steve Weisbrod, Canastota, N.Y. · Vol. 36, No. 2 (2012), p. 14

He says his 2009 New Holland Boomer 8N is a great looking tractor that handles well. “However, it has an infinitely variable transmission that is light duty and unpredictable.

“I own a 2009 Cadillac CTS-V equipped with a 556 hp supercharged engine, which was modified to 650 hp. It’s the most awesome vehicle I’ve ever driven.”

New Holland Boomer TC25D tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Russell Rogotzke, Springfield, Minn. · Vol. 30, No. 2 (2006), p. 15

Russell likes his New Holland Boomer TC25D tractor equipped with a front-end loader and backhoe. “At first I wondered where I would store the loader when I wasn’t using it. However, it wasn’t long before I was using the loader almost every day for some job. It’s very handy. This tractor has only 25 hp and hydrostatic drive, but even so I can use it to pull a gravity box loaded with 12,000 lbs. of seed out in the field, and to operate the gravity box’s auger to fill our grain drill. I have many uses for the backhoe, including small tiling jobs. I add more than 1,000 ft. of tile every year.”

New Holland Boomer TC29 loader tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Bob Corbin, Sykesville, Md. · Vol. 38, No. 6 (2014), p. 13

“In 2000 I retired from farming and sold all my big equipment. I then bought a New Holland Boomer TC29 loader tractor equipped with adjustable 3-pt. lower links and a remote hydraulic outlet. It’s a super little tractor, and I’ve moved a mountain of dirt, gravel and mulch with it. The loader tears right through 4-ft. deep snowdrifts. I also use this tractor to split firewood every year, even though the hydraulics on it aren’t very fast. The truth is, I’m not so fast any more, either.

“My worst buy is my Clarke 120-volt welder. It was advertised at 100 amps max, but I found the actual output to be only 45 amps which made it unusable for normal welding. So I went back to using a 220-volt welder, and this one is now gathering dust.”

New Holland BR7070 round baler

1 Best Buy0 Worst Buys
Best Buy
James Brashears, Olathe, Kansas · Vol. 42, No. 3 (2018), p. 14

“I love my New Holland BR7070 round baler. This is the fifth New Holland baler I’ve owned, starting with a model 68 small square baler.

“I do wish the company built tractors as well as they build balers. I’ve had two New Holland tractors in the last five years – a T5050 and my current T4.100. Both have been in the shop or been worked on so many times that I’ve lost count. The T5050 had a lot of electrical problems and, at only about 800 hrs., I traded it for the T4.100.

“The T4.100 has about 900 hrs. on it and has had electrical issues with the speedometer, which were finally fixed. There have also been problems with the DEF gauge and the gear shifter. The alternator fell off but was replaced under warranty. After the tractor’s 2-year warranty expired I paid another $900 for an extended power train warranty. Unfortunately, it didn’t cover the gear shifter linkage.

“I think New Holland should stick to building the best balers in the U.S. and forget about building tractors. I’ll never buy another New Holland tractor, even though the company now offers a 5-year warranty.”

New Holland BR750 round baler

0 Best Buys1 Worst Buy
Worst Buy
Jerry Hon, Florence, Ind. · Vol. 43, No. 5 (2019), p. 15

Jerry nominates his New Holland BR750 round baler as his “worst buy”. “The pickup on this baler vibrates up and down so much that I can’t operate the tractor pto at its normal speed. The vibration is so bad that some of the bars have broken. The pickup has only one counter balance instead of two like on newer balers. Also, the baler cuts the string too short for the next bale.”

New Holland BR770 round baler

1 Best Buy0 Worst Buys
Best Buy
Merle Solie, Mentor, Minn. · Vol. 36, No. 1 (2012), p. 13

“It makes nice solid bales and is easy to service,” says Merle about his New Holland BR770 round baler.

New Holland BR 780 round baler

1 Best Buy0 Worst Buys
Best Buy
James E. Smith, Aberdeen, S. Dak. · Vol. 28, No. 2 (2004), p. 14

“My 2003 New Holland BR 780 round baler has performed well in a variety of crops and conditions. It has a lot of capacity and makes solid, square shouldered bales with a minimum of operator effort. I previously owned New Holland 855 and 664 balers which did a good job for me, so my expectations were high. Fortunately, this machine is living up to them.”

New Holland BR780A round baler

1 Best Buy0 Worst Buys
Best Buy
Ted Johnson, Colesburg, Iowa · Vol. 36, No. 6 (2012), p. 15

Ted’s happy with his 2005 New Holland TS115A tractor equipped with a 6.7-liter engine and 24-speed transmission. “I use this tractor mostly for baling work. It has a lot of power and only uses 2 1/2 gal. of fuel per hour. It has about 1,000 hours on it with no problems.

“I’ve used my 2007 New Holland BR780A round baler to make about 9,000 bales with no problems. It makes fantastic bales with nice, smooth edges that weigh up to 2,300 lbs.

“My 2008 Ag-Bag G6060 pull-type bagger is my worst buy. The main gearbox recently had to be replaced for the third time with only about 200 bags made. Last summer the axle broke away from the main frame due to a poor factory weld. I should have kept the Kelly Ryan bagger that I traded in.”

New Holland CR6090 combine

1 Best Buy0 Worst Buys
Best Buy
John Slater, Olin, Iowa · Vol. 37, No. 4 (2013), p. 13

John’s the satisfied owner of a 2012 New Holland CR6090 combine. “It has a lot of power and tremendous capacity in soybeans. Threshes very clean in both corn and beans.”

New Holland CR7090 combine

1 Best Buy0 Worst Buys
Best Buy
Delbert Bauersachs, Pinckneyville, Ill. · Vol. 44, No. 1 (2020), p. 13

“My Case IH Magnum tractor handles so easily and has lots of power. Great tractor.

“We can cut 125 to 140 acres a day with a 35-ft. MacDon header on our New Holland CR7090 combine with virtually no grain loss out the back. A MacDon header feeds so evenly that you can do more work than you could with a 45-ft. head from another brand. And this NH combine does a beautiful job processing the crop material.

“I also have a Kuhn SL118 manure spreader that spreads manure instead of just unloading it, like many other spreaders. It tears manure into small pieces and throws it 75 to 80 ft. Very well-built.”

New Holland CR9000

1 Best Buy0 Worst Buys
Best Buy
Travis Buhe, Rib Lake, Wis. · Vol. 34, No. 6 (2010), p. 15

Travis likes his 2010 New Holland CR9000 series Twin Rotor combine. “The twin rotor design results in faster threshing and separating, and the combine has a roomy, quiet cab. The new IntelliView Plus II color touch-screen display on my combine has a 10.4-in. diagonal screen. It allows me to monitor the combine’s rotor speed, header height, engine rpm’s, percent of engine load, sieve performance, grain loss, returns, and self-leveling cleaning system.”

New Holland CR9070 combine

1 Best Buy0 Worst Buys
Best Buy
Troy Miller, Spring Valley, Sask. · Vol. 47, No. 3 (2023), p. 13

Troy’s pleased with his 2010 New Holland CR9070 combine. “I run it with a 40-ft. MacDon header approximately 300 hrs./year. I’ve had almost no downtime during harvest. I get a very clean sample with minimal losses. I’ll be sticking with the NH twin rotor when it’s time to upgrade.

“I haven’t been happy with my Generac XG8000E generator. The battery was dead out of the box. It also kills batteries very quickly. It’s almost impossible to start. Once it’s running, it’ll power the house but it’s just a nightmare to get started.”

New Holland CR940 combine

1 Best Buy0 Worst Buys
Best Buy
Marvion Reichert, Elm Creek, Neb. · Vol. 30, No. 3 (2006), p. 12

“I bought a New Holland CR940 combine two years ago and this machine has been nothing but trouble. Between myself and the dealer, we’ve put more than $34,000 into it,” says Marvion. “We’ve had a tremendous amount of downtime. It just won’t keep running. Every time we get something fixed, something else goes wrong. We’re in the second year of the warranty so every service visit costs $500. When I bought this machine, I figured the factory was just 50 miles away so they would be able to fix it. But the factory might as well be overseas for all the good it has done us.

“I’ve owned five New Holland combines and I have three tractors, a half dozen skid steer loaders, and other company equipment. So I’m a good customer but you could never tell that from the way they’ve treated me.

“The company wanted me to pay $65,000 with a trade-in to get a replacement machine. I offered the equivalent of $41,000 but they said no. We dickered around for 6 months with no result. Company officials kept saying they’d call me back but they didn’t. I finally looked up the name of the CEO and sent him a letter at his home address, explaining my situation. That really got the ball rolling and we settled on my original offer.

“Here’s how this company treated me: Lots of sympathy but no action. A very frustrating experience.”

New Holland D1000

1 Best Buy0 Worst Buys
Best Buy
BettyAnn Bakos, Denio, Oregon · Vol. 19, No. 2 (1995), p. 16

BettyAnn Bakos, Denio, Oregon: “Our 1992 Hesston 1320 swatherwindrower is a wonderful, reliable machine that’s a joy to use. It effortlessly out-does our Hesston 6600 swather. No down time, “Another best buy is our 1994 ProAg bale scoop. It’s simple to use and reliable and a perfect fit with 750 to 800 Ib, square bales. Makes an easy one-man operation out of clearing fields. “One product we're extremely dissatisfied with is our 1992 New Holland D1000 square baler. It's a $40,000 machine that needed 10 service calls to produce a total of 5,000 bales in three years. The dealer was helpful but the factory would not stand behind this poorly engineered product.”

New Holland DMG 700 rotary mower

0 Best Buys1 Worst Buy
Worst Buy
Boyd Cable, McAlester, Okla. · Vol. 22, No. 2 (1998), p. 15

“My 1992 Case-IH 5140 tractor is easy to operate and is my best buy. Everything on it works good. No problems. “My worst buy is my 1996 New Holland DMG 700 rotary mower. When a bearing went out the dealer put a new one in, but the same thing happened two more times.“ again. It works smooth and has a level built into the top of the handle which makes it easy to drill straight holes.”

New Holland FP 230 forage harvester

1 Best Buy0 Worst Buys
Best Buy
Mountain View Dairy, Stuarts Draft, Va. · Vol. 26, No. 6 (2002), p. 15

A 2000 New Holland FP 230 forage harvester rates as their “best buy”. “We chop a lot of hay and corn. Whenever the hay was heavy or a little tough, our old chopper would plug up repeatedly. This machine, on the other hand, gobbles up any crop it gets its hands on as long as you have enough horsepower. It’s equipped with a built-in kernel processor. Changing headers on it is a snap. The company has a good thing going here.”

New Holland Gemini 8360 equipped

1 Best Buy0 Worst Buys
Best Buy
John Neuman, Baraboo, Wis. · Vol. 22, No. 5 (1998), p. 17

“There’s nothing the company could do to improve this tractor,” says John, well pleased with his 1998 New Holland Gemini 8360 equipped with power shift transmission and MFWD.

New Holland Genesis 8670 Super steer front wheel

1 Best Buy0 Worst Buys
Best Buy
Steve Fienup, Shenandoah, Iowa · Vol. 24, No. 5 (2000), p. 15

“I like my 1998 New Holland Genesis 8670 Super Steer front wheel assist tractor. It’s an excellent tractor and has both a 540 and a 1,000 rpm pto. This tractor has a lot of power and traction and has a comfortable seat and cab. I thoroughly enjoy using the joystick control that operates the tractor’s 16-speed transmission. I can be running in road gear and pull the lever back into reverse without even having to hit the brakes or clutch. It’s effortless.

“Last year I installed an Ag Leader 3000 yield monitor in my New Holland TR 87 combine equipped with a 20-ft. table. The combine is excellent and is equipped with a header terrain tracer which I really like. The yield monitor works good on level ground, but not on hills. It’s not uncommon for the monitor to show one side of the combine running 30 bu. higher or lower than the other side. As a result, whenever I’m harvesting on terraces I often have to take half-cuts.”

New Holland Genesis 8770

1 Best Buy0 Worst Buys
Best Buy
Brian Bish, Giltner, Neb. · Vol. 30, No. 6 (2006), p. 14

Brian likes Deutz air-cooled diesel engines. “Farming here in central Nebraska we have to survive on irrigation. We have more than 20 wells and pumps to keep running so it’s nice to have reliable, efficient diesel engines to power our irrigation systems. The Deutz engines we use range from 2-cylinder models to V-8’s, and they’re vital to our way of life. I bought most of them used and needing some repair work. Parts for these engines are easy to find and even though most of them were built in the 1970’s, they still perform as well as any engines built today.

“My New Holland Genesis 8770 and 8870 tractors are both best buys. They’re simple to operate and fuel efficient, and the super steer front axle results in a shorter turning radius than other front wheel drive tractors. My tractors have a combined total of more than 10,000 hours on them, yet they’ve needed only minor repairs.

“Our New Holland LS 190 skid steer loader is also a best buy. We use it for loading seed, feeding cattle, moving dirt, and doing tons of other back-saving projects.”

New Holland GT 65 lawn

0 Best Buys1 Worst Buy
Worst Buy
Jud Greene, Brinson, Ga. · Vol. 26, No. 1 (2002), p. 14

“I’m impressed with my 2000 Case-IH MX 170 tractor. It has an excellent cab with good visibility, and runs quiet. It handles well, will easily pull a 24-ft. disk, and has good hydraulics. However, I wish it had a full powershift transmission like the one on my Case-IH 7220 tractor. I’ve been pleased with all my Case-IH tractors.

“I own two Zimmatic center pivot irrigation systems, one a 1999 model and the other 2001. These pivots have been trouble-free except for an endgun that quit working on the 2001 model.

“My 1997 New Holland GT 65 lawn and garden tractor equipped with a diesel engine and 48-in. mower deck is my worst buy. The tractor itself works okay, but the mower is terrible. The problem is that the center gearbox and blade spindle bearings don’t last very long. I’ve spent more than $2,000 during the last two years for repairs to the deck. I’ve tried to trade the tractor, but the deck has such a bad reputation that nobody, including my New Holland dealer, wants it. Now I’m stuck with a worthless $7,000 mower. The company admits the mower decks on this tractor are bad but won’t do anything about it.”

New Holland GT 85 garden tractor equipped

0 Best Buys1 Worst Buy
Worst Buy
Joy Smith, Griswold, Iowa · Vol. 25, No. 6 (2001), p. 15

Joy’s had problems with her 1997 New Holland GT 85 garden tractor equipped with a mower deck. “I bought it for $10,500 and less than four years later the gas tank began to split along the seam, which I considered to be a manufacturing defect. The dealer installed a new gas tank for $215 and ever since then the tractor hasn’t run right. I’ve had to spend more than $300 on additional repairs and now the tractor is still in the shop. The company says they haven’t had any other complaints about split gas tanks, and therefore won’t pay for the required parts and labor.”

New Holland Hayliner 273 small square baler

1 Best Buy0 Worst Buys
Best Buy
James Hanzel, Cazenovia, Wis. · Vol. 40, No. 2 (2016), p. 13

“In May of 1974 I bought a New Holland Hayliner 273 small square baler, and we’re still using it with no problems not caused by the operator.

“I use a BaleSkiis plastic liner on the baler’s bale chamber which works great (www.LDAGmachinery.com; ph 866 889-3846). It eliminates knotter problems and broken bales, stops bale chamber plugging and buildup, and results in perfect compact bales.”

New Holland HW 320 self-propelled windrower

1 Best Buy0 Worst Buys
Best Buy
Matt Schelling, Orange City, Iowa · Vol. 24, No. 1 (2000), p. 17

“My 1999 New Holland HW 320 self-propelled windrower is an industrial quality machine. I’ve used it in crops and conditions that would stop other machines. Windrow and crimper adjustments are simple to make, and the cab and controls are designed for long hours of comfort. The 110 hp Genesis engine uses only about 3 1/2 gallons of fuel per hour. It’s equipped with a 2300 series sickle head.”

New Holland L160 skid loader

1 Best Buy0 Worst Buys
Best Buy
Tom Johnstin, Marietta, Penn. · Vol. 32, No. 1 (2008), p. 14

A 2007 New Holland L160 skid loader rates as Tom’s “best buy”. “I had a small Case 1825 skid loader for 11 years that performed well. However, my operation outgrew it and I needed a larger and more comfortable model. The L160 is perfect and is so much more comfortable to use. It’s equipped with a hydraulic-operated bucket release which I think is wonderful. It lets me change attachments from the driver’s seat just by pushing a button.”

New Holland L170 skid loader

1 Best Buy0 Worst Buys
Best Buy
Andy Anderson, Laramie, Wyo. · Vol. 34, No. 1 (2010), p. 13

A 2001 New Holland L170 skid loader rates as Andy’s “best buy”. “I bought this skid loader used with 1,508 hours and have several attachments for it, including a snowblower, post hole digger, forks and hay spear. No problems, and it always starts right up. I’m well pleased with it.”

New Holland L225 skid loader

0 Best Buys1 Worst Buy
Worst Buy
Gerald A. Haugland, Hampton, Iowa · Vol. 36, No. 2 (2012), p. 15

A 2001 Dodge Dakota 4-door, 4-WD pickup equipped with a V-8 Magnum engine rates as Gerald’s “best buy”. “I was told the transmission wouldn’t be any good, and Consumer Reports magazine gave this pickup a bad report. However, we now have about 151,000 miles on ours and it runs great. No engine or transmission problems. The 4-WD is great in winter, and we love the ride and the performance of the V-8.”

He’s had problems with his early 1970’s New Holland L225 skid loader. “Every time I turn around something else on it seems to go wrong. I had to install a new engine, overhaul the drive pump, put in new inner and outer wheel seals, replace the tires, and overhaul the bucket cylinders. It starts hard and replacement parts are expensive. It’s hard to get in and out of, and the engine compartment is hard to get at with the loader arms down.”

New Holland L250 compact 18

1 Best Buy0 Worst Buys
Best Buy
Dan Day, Earlham, Iowa · Vol. 41, No. 4 (2017), p. 15

“I’m happy with the New Holland L250 compact, 18 hp. skid loader I bought used. It has a great cab entry for such a small loader, and the operator station is much more comfortable than the one on the Bobcat I used to own. It can do a surprising amount of work and is really handy for cleaning stables.

“My WORX Aerocart 8-in-1 wheelbarrow/yard cart/dolly looked great when I saw it advertised on TV, but it doesn’t hold much cargo. Also, the handles are too short which limits its usefulness as a furniture dolly.”

New Holland L455

1 Best Buy0 Worst Buys
Best Buy
Earl Rahn, Beaver Dam, Wis · Vol. 19, No. 4 (1995), p. 15

Earl Rahn, Beaver Dam, Wis.: Earl's the satisfied owner of a New Holland L455 skid steer loader. “It’s my favorite helper on the farm. It’s small enough that I can use it in small places, yet it's built strong enough that I can use it to lift big, heavy items and move machinery. It’s economical to operate.”

New Holland L775 skid steer loader

1 Best Buy0 Worst Buys
Best Buy
Randy Brooks, Peterstown, W. Va. · Vol. 28, No. 6 (2004), p. 15

“It works fast and does a great job,” says Randy, pleased with his 1980 New Holland 1495 self-propelled haybine equipped with a 12-ft. head. “I’m able to cut 15 acres with it in only two hours.

“My New Holland L775 skid steer loader is a best buy.

“My Vermeer 605C round baler is my worst buy. If the hay is a little green or wet, it clogs up in the baler’s front corners.”

New Holland LS160 skid loader

1 Best Buy0 Worst Buys
Best Buy
James J. Keem, Arcade, N.Y. · Vol. 37, No. 5 (2013), p. 13

James likes his New Holland LS160 skid loader. “I considered several other brands and models before I narrowed my choices down to this model and one made by Deere. My son and I tested both models side by side, with my son driving the Deere. The Deere has a higher horsepower rating but it got stuck and kept overheating. I was able to drive the New Holland model right around the Deere with no problem.”

He’s disappointed with his Deere LT riding mower. “The first year this mower went back 4 different times to the dealer for repairs. The next year we had more trouble, so when the warranty was about to expire we traded for a Cub Cadet zero turn riding mower. We’ve used it for almost 3 years with no problems.”

New Holland LX565 skid loader

1 Best Buy0 Worst Buys
Best Buy
Bud N. Vogelzang, Sioux Center, Iowa · Vol. 43, No. 4 (2019), p. 12

“I bought a used 1996 New Holland LX565 skid loader in 2014 with 4,950 hrs. on it. I don’t use this machine a lot, but when I do I use it hard to move full buckets of dirt. It’s reliable and easy to operate, with very little electronic junk on it that might cause problems.”

A 2011 New Holland C232 skid loader rates as Bud’s “worst buy”. “A hydraulic line blew at 2,000 hrs., and new hand controls and a new computer system have had to be installed. A power relay stuck, which ruined the battery, and there have been other problems. I’ve spent more than $8,000 on repairs.”

New Holland LX885 skid steer loader

1 Best Buy0 Worst Buys
Best Buy
Ron Ratzlaff, Avon, S. Dak. · Vol. 23, No. 3 (1999), p. 14

“My New Holland 640 ‘silage special’ baler makes nice, tight round bales every time and has been maintenance-free.

“My New Holland LX885 skid steer loader has about 1,200 hours on it and is a best buy. The only problem was a fuel injector that went bad. However, the repair work was covered by warranty. In my opinion it’s the best skid steer out there.”

“A 1996 Polaris Sportsman 500 is my worst buy. The repair bills on it never seem to end. Repair work has included a camshaft, U-joint, two drive belts, and both clutch pulleys. Also, it wouldn’t shift into range easily. No dealer wants it as a trade-in so it’s costing us about 90 cents a mile to own.”

New Holland ProCart 1022 rake

1 Best Buy0 Worst Buys
Best Buy
Keith Porterfield, Gap Mills Wyo. · Vol. 45, No. 1 (2021), p. 13

Keith is happy with his 2014 Kubota M7060 tractor and his 2018 New Holland ProCart 1022 rake. “The Kubota is a good all-around tractor for our cattle operation. It has over 1,800 hrs. with no problems. The rake does an excellent job.”

New Holland ProCart 1022 Wheelrake

1 Best Buy0 Worst Buys
Best Buy
Gary Bohannon, Athens, Tenn. · Vol. 39, No. 2 (2015), p. 12

“I’m very happy with my 2012 New Holland ProCart 1022 Wheelrake. It rakes cleaner and faster than other wheelrakes we have used. Each wheel has its own spring and adjustment. I bought extra hydraulic lines so I could run two lines to each lift cylinder. Now I can raise one side at a time. Lets me rake with one side at a time if I need to.”

New Holland RB 450 round baler

1 Best Buy0 Worst Buys
Best Buy
Eldon Reiners, Bucyrus, Mo. · Vol. 36, No. 1 (2012), p. 15

“My Deere X360 riding mower is equipped with power steering, a tilt steering wheel, and hydraulic deck lift. It turns sharp and is a fine machine.

“My New Holland RB 450 round baler had some minor problems at first but the dealer fixed them, and now it works fine. It’s important to have a good battery and charging system on your tractor, because the computer on these balers requires a full 12 volts all the time.”

New Holland T1510 30 hp tractor equipped

0 Best Buys1 Worst Buy
Worst Buy
Paul Kroeger, Porter Cors, N.Y. · Vol. 41, No. 1 (2017), p. 13

“No problems with my 2009 New Holland T1510 30 hp tractor equipped with an 8-ft. Woods backhoe and 6-ft. snowblower. I only wish it had a step that would make it easier to get into the cab. I added backup lights and a soft cab enclosure. A slit I cut in back of it lets me reach out to hand crank my snowblower chute.

“I like my 2000 DR walk-behind 6 hp. Powerwagon that’s equipped with electric start and snow chains. It doesn’t really need electric start. I leave the chains on all year long.

“The fuel tank on my 2002 DR 18 hp 4-in. wood chipper had to be replaced under factory recall. I removed the shield on the machine’s rear chute in order to end its tendency to clog. Now it shoots chips about 20 ft. out into the woods.

“The Troy-Bilt 570 27-ton log splitter I bought used is a best buy. I read a review in a magazine years ago saying this splitter should only be counted on to make 3 or 4 cords a year, but I’ve used it to split about 8 to 10 cords each year. I installed some flashing to deflect exhaust away from the operator whenever I use the splitter in the horizontal position.

“I like the 2014 6-ft. box scraper I bought from Everything Attachments (www.everythingattachments.com; ph 828 464-1200). The company was very helpful with selecting the right scraper to fit my tractor for what I wanted to do. This scraper cost less and was built with better quality than anything else I could find.

New Holland T35

1 Best Buy0 Worst Buys
Best Buy
S. Wooldridge, Fletcher, Okla. · Vol. 31, No. 3 (2007), p. 12

“My New Holland T35 is a handy tractor for its size. It has a loader and does a good job. I can put it in either 2 or 4-WD. The hydrostatic drive makes this tractor easy to operate. I use it with a King Kutter rototiller which leaves the soil in beautiful condition. I’m well pleased with this tractor.”

New Holland T4.75 loader tractor

1 Best Buy0 Worst Buys
Best Buy
Matthew L. Martin, El Dorado Springs, Mo. · Vol. 43, No. 3 (2019), p. 15

“It performs well, has a powerful engine, and is user friendly,” says Matthew about his 2017 New Holland T4.75 loader tractor.

New Holland T6.155 loader tractor

1 Best Buy0 Worst Buys
Best Buy
Lee Vangsness, Decorah, Iowa · Vol. 45, No. 1 (2021), p. 14

Lee’s the satisfied owner of a 2018 New Holland T6.155 loader tractor. “It has about 800 trouble-free hours on it, and was less expensive than comparable models.”

New Holland TC18 small tractor

1 Best Buy0 Worst Buys
Best Buy
Clark Dysle, Scio, Ore. · Vol. 46, No. 4 (2022), p. 15

“My 2000 New Holland TC18 small tractor with bucket has 230 hours now. It can get in tight spots and knock down brush and blackberries. I can also load small logs in the bed of my 2-ton farm truck. The 4-WD gets me out of mud patches.

“The batteries on my Redback 120-volt lithium battery chainsaw wouldn’t recharge even with one light left on the battery. I can’t reach the manufacturer in Colorado.”

New Holland TC 210 tractor

1 Best Buy0 Worst Buys
Best Buy
Dana L. Ellsworth, Brushton, N.Y. · Vol. 35, No. 3 (2011), p. 15

“My 2004 New Holland TC 210 tractor worked great, until at about 900 hours when the starter had to be replaced. I’ve had 6 starters put on it, by 3 different dealers, in the past 18 months. All the starters had gear noses that were too long which caused them to rub against the flywheel, and then the tractor would stall out. As a result, this tractor has been sitting idle in our yard for almost a year. I’m about ready to scrap it out.”

New Holland TC240 4-WD compact tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Terry Sauer, Cambria, Wis. · Vol. 29, No. 5 (2005), p. 15

“My New Holland TC240 4-WD compact tractor equipped with a front-end loader and 60-in. belly mower is my best buy. I use this tractor all year long to mow our lawn, plow snow, and do other chores. The 4-WD has gotten me out of a lot of trouble, and it also helps whenever I have a full bucket of gravel and need more weight on back. My only complaint is that you can’t get this tractor equipped with a hard cab. Also, the pins that hold the mower on kept falling out. However, I was able to fix that problem.”

New Holland TC24DA compact tractor

1 Best Buy0 Worst Buys
Best Buy
John Latulipe, Bombay, N.Y. · Vol. 43, No. 3 (2019), p. 15

John’s the satisfied owner of a 2001 New Holland TC24DA compact tractor. “I use it to move snow and to mow 4 acres of grass. All I’ve replaced is the battery. No problems.”

New Holland TC29D tractor

1 Best Buy0 Worst Buys
Best Buy
M a r k J . Lussier, New Salem, Mass. · Vol. 35, No. 3 (2011), p. 13

“My Hawkline Cat. I single shank subsoiler is built tough (ph 800 447-2751; www.gohawkline.com). It does a great job of ripping up sod, roots and rocks and works great behind my 1998 New Holland TC29D tractor, which is also a best buy.”

New Holland TC 30 4-WD loader tractor

1 Best Buy0 Worst Buys
Best Buy
Donald Cool, Kalamazoo, Mich. · Vol. 35, No. 2 (2011), p. 14

“I like my New Holland TC 30 4-WD loader tractor. It’s equipped with Cooper tires that have been treated with a process called ‘siping’ where slices are made across the tire tread. The process increased traction and boosted performance on ice.”

New Holland TC-33 tractor

1 Best Buy0 Worst Buys
Best Buy
Andrew R. Holko, Bristolville, Ohio · Vol. 29, No. 5 (2005), p. 13

“I use my 2003 New Holland TC-33 tractor on my tree farm, along with five other tractors. It’s reliable, well balanced, and well engineered. The problem is that on rough ground the plastic parts break, such as light assemblies, grill parts, instrument panels, etc. My dealer has been helpful. However, I question the design and testing of these Boomer series tractors.”

New Holland TC33D 33 hp diesel tractor

0 Best Buys1 Worst Buy
Worst Buy
John A. Luhrs, Bedford, Va. · Vol. 39, No. 6 (2015), p. 15

“No problems with my 2000 New Holland TC33D 33 hp diesel tractor. It’s a great little tractor.

“My 2012 Dixie Silver Eagle chopper mower cuts great and works fast. No problems (www.dixiechopper.com; ph 765 246-7737).”

New Holland TC35 loader tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Thomas D. Debaun, Shelbyville, Ind. · Vol. 36, No. 2 (2012), p. 14

“I like my New Holland TC35 loader tractor equipped with a grapple fork. Besides our farm, we also own 16 acres of river front woods. The grapple fork works great for keeping our woods clear of flood-carried trash and fallen tree limbs.”

New Holland TC35A 4-WD tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Lynn Lucius, Vardaman, Miss. · Vol. 30, No. 1 (2006), p. 12

“My 2003 New Holland TC35A 4-WD tractor equipped with a Bush Hog front-end loader is my best buy. It has almost 500 hours on it and has been a pleasure to operate. The loader is great for feeding cows and loading mulch. We also use the tractor to mow and to haul logs. It has only 35 hp, but with 4-WD it can do a lot of jobs that would normally take a bigger machine.

“This tractor has had a couple of problems including an electrical short and a burned-out clutch, but the clutch problem was probably due more to an inexperienced driver than to equipment failure. The dealer was more than helpful with the warranty and got the tractor going again. I had been a loyal Deere customer but I switched to the blue New Holland color for price, and I couldn’t be happier.”

New Holland TC35 DA tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Walter Betzel, River Falls, Wis. · Vol. 31, No. 2 (2007), p. 15

Walter’s the satisfied owner of a 2005 New Holland TC35 DA tractor equipped with super steer and 4-WD. “I love the super steer system - it makes any job I do with this tractor fun. It has a lot of power for its size and uses less fuel than my riding mower. The quality of the entire tractor is great.”

On the worst buy side, he lists his 2004 Cub Cadet 5284 and 2005 Cub Cadet 6284 4-WD tractors. “The 5284 went through four hydro transmissions in only six months and 35 hours. They couldn’t get another transmission for a few months because they’re made in China so I traded it for the 6284 model. However, it had the same transmission trouble - the hydro wouldn’t hold up going from forward to reverse.”

New Holland TC40A 4-WD loader tractor

1 Best Buy0 Worst Buys
Best Buy
David Klemme, Oklahoma City, Okla. · Vol. 35, No. 1 (2011), p. 15

David uses his 2007 New Holland TC40A 4-WD loader tractor and 6-ft. bush hog to do subcontracting work for developers and lawn maintenance people. “These machines have never let me down. I’ve logged 2,400 hrs. on them at $40 or more per hour, which is a better return on my investment than the stock market. And weeds keep growing no matter what the economy is like.”

New Holland TC45D tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Bob Spyker, Defiance, Ohio · Vol. 30, No. 2 (2006), p. 13

Bob’s the satisfied owner of a New Holland TC45D tractor equipped with a super steer system. “It’s small and compact for a 45 hp hydrostatic drive tractor and is very dependable. It handles easily in tight spots and is an excellent tractor for mowing, running a haybine, raking and baling.”

New Holland TC55DA tractors

0 Best Buys1 Worst Buy
Worst Buy
Robert Spiker, Warren, Ind. · Vol. 34, No. 6 (2010), p. 13

Robert’s had a lot of problems with two different New Holland TC55DA tractors, one a 2007 model and the other a 2008. “I farm 30 acres of hay, which I cut with a 7-ft. sickle mower and rake with an old 4-bar Deere steel-wheeled model. The 2007 model was a lemon so the dealer took it back and replaced it with the 2008 model. However, last June I was working in the field when the tractor’s drawbar fell off. The tractor had only about 400 hrs. on it. Then in August the hydraulics failed. By that time the tractor was out of warranty, despite having only 540 hrs. on it. It cost $1,263.79 to repair.”

New Holland TC55DA 4-WD tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Charley Page, Redfield, Ark. · Vol. 40, No. 4 (2016), p. 14

“I bought my 2004 New Holland TC55DA 4-WD tractor equipped with a TL-18A front-end loader used with about 600 hours on it. It’s my best buy ever. The 4-WD and hydraulic shuttle reverser on it have really spoiled me, as they make my tractor work much easier. The tractor has almost 1,000 hours on it but has needed only a couple of minor repairs. I’m definitely sold on New Holland.”

New Holland TD80 tractor

1 Best Buy0 Worst Buys
Best Buy
Robert Weatherhead, Exeland, Wis. · Vol. 38, No. 6 (2014), p. 14

“My Stihl 390 chainsaw and Stihl 55RC weed whipper both start and run well. We use the saw to cut 20 to 30 cords of wood every year.

“My 2007 New Holland TD80 tractor had a lot of problems and had to be split twice. It went through 4 pto clutches because the cables that run the clutches stuck and ruined them. The first time this happened with less than 50 hrs. on the pto clutch; the second time, 1,200 hrs. Also, the tractor’s steering rod bent, the primer pump quit working, and bolts in the frame broke. My dealer has been good to me, but not the company.”

New Holland TD95D loader tractor needs

1 Best Buy0 Worst Buys
Best Buy
John Thies, Perry, Mo. · Vol. 32, No. 1 (2008), p. 14

“My New Hol-land TC26DA HST tractor rides rough. The cab on my New Holland TD95D loader tractor needs more leg room. Also, the front upper portion of the cab restricts my visibility when I use the tractor to stack bales in our barn.

“My International Harvester Super H tractor is an all-time best buy. I often drive it in antique tractor parades.”

New Holland TG210 tractor

1 Best Buy0 Worst Buys
Best Buy
Francis Henderson, Brinston, Ontario · Vol. 30, No. 3 (2006), p. 15

“My 2004 New Holland TG210 tractor is a pleasure to operate. No problems.

“My 2005 New Holland big square baler works like a dream and has been trouble-free.

“My 2004 J-Star Van Dale 53-bu. feed cart is my worst buy. It has a bad paint job, a very loud muffler, and the 9 hp Honda engine has caused nothing but trouble. Gas keeps getting into the oil, but the dealer told me I had to go to the company for help. I’ve had to change the needle and carburetor, all at my own expense. The company gave me every excuse in the book why the problem was my fault. They also said that I have to turn the gas off whenever the machine is not in use. I have six other Honda engines, and I don’t have to shut the fuel off on any of them.”

New Holland TJ 325 4-WD tractor

1 Best Buy0 Worst Buys
Best Buy
Jerry Webb, Harrold, S. Dak. · Vol. 34, No. 5 (2010), p. 14

“I really like the 16-speed powershift transmission on my 2006 New Holland TJ 325 4-WD tractor.

“My 2006 Komatsu 146 WB backhoe is a joy to operate and uses little fuel. Both machines are real workhorses.

“My 2009 Speedway series 125 amp wire welder never worked right from day one. I talked to the company’s customer service people 6 different times and heard a dozen different reasons why they wouldn’t honor the warranty. They even told me they would send a replacement unit, but they never did.”

New Holland TL 100A 2-WD tractor

1 Best Buy0 Worst Buys
Best Buy
Gary Lake, Front Royal, Va. · Vol. 33, No. 1 (2009), p. 13

“It runs and handles great and has a lot of power,” says Gary, pleased with his 2006 New Holland TL 100A 2-WD tractor. “It’s equipped with a cab, heater, and air conditioning. We use it mainly with a round baler.

“My 2000 Belarus 4-WD tractor equipped with a cab and front-end loader is my worst buy. It has two solid oil lines that come together in front of the engine and are connected by a 6-in. length of rubber hose. Unfortunately, the hose blew a hole and all the engine oil ran out, causing the engine to lock up. It happened at 670 hours.”

New Holland TL1525

1 Best Buy0 Worst Buys
Best Buy
Darrick Caisse, Chaplin, Conn. · Vol. 37, No. 2 (2013), p. 15

“It’s the best little tractor I’ve ever owned,” says Darrick about his New Holland TL1525. “It handles jobs I wouldn’t expect it to. It’s super reliable and super efficient, and I bought it at a great price. It’s small enough to fit in my garage and always starts right up. Also, all the parts on it are metal – no plastic.”

New Holland TL30

1 Best Buy0 Worst Buys
Best Buy
Tommy Jackson, Crystal Springs, Miss. · Vol. 41, No. 3 (2017), p. 13

“My New Holland TL30 is one heavy-duty little tractor. Works great.”

New Holland TL 80 loader tractor

0 Best Buys1 Worst Buy
Worst Buy
John L. Light, Evington, Va. · Vol. 32, No. 3 (2008), p. 14

John’s the third owner of a 1966 Case 531 diesel utility tractor and says it’s his “best buy”. “For many years this was my primary tractor for plowing, disking, mowing, raking and baling. It handles well, has a lot of power for its size, yet is fuel efficient. Except when pulling a maximum load it burns less than one gallon of fuel per hour. It has a lot of torque which minimizes down shifting. I wish I could get a new one since this one is almost worn out.

“My New Holland TL 80 loader tractor with cab is my worst buy. It has a marginal torque curve which produces excessive speed drop of the pto with varying pto load. It has had a lot of small but recurring problems, and the fuel effiency isn’t the greatest. Also, the hydraulics are often very slow. However, this tractor does handle well and is comfortable to operate. It would have been a much better tractor if it had a Perkins diesel engine. It has about 1,000 hours on it.”

New Holland TL90 tractor

1 Best Buy1 Worst Buy
Best BuyWorst Buy
Roger Ezell, Perry, Fla. · Vol. 44, No. 6 (2020), p. 15

“I’m happy with the 1998 Farmtrac 60 tractor I bought used in 2014. I paid about $25,000 for it. It was in tough shape and needed extensive repairs, but now it’s a very reliable tractor with a lot of power. It looks like a Ford tractor, and many parts for it are interchangeable.

“My New Holland TL90 tractor has been a disappointment. It has a lot of power and I love the way it handles, but something is always going wrong on it. The problems are mainly with the fuel system and the electrical wiring.”

New Holland TM120

1 Best Buy0 Worst Buys
Best Buy
Robert Kinkkammer, Anamosa, Iowa · Vol. 37, No. 1 (2013), p. 14

“I’m happy with both my 2008 New Holland TM120 and TN60A tractors. No more oil leaks like I used to have with Deere tractors.

“I’ve noticed that Harbor Freight tools sometimes get a bad rap in FARM SHOW, but I’ve had good luck with many of the company’s products, including their 29-piece drill bit sets.”

New Holland TM-140 4-WD tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Donald B. Colvin, Whittemore, Mich. · Vol. 36, No. 3 (2012), p. 15

Donald’s the proud owner of a 2006 New Holland TM-140 4-WD tractor equipped with a New Holland 62LB front-end loader. “This tractor has about 3,300 hours of use without a single problem. It always starts, even in the coldest weather.

“My 2006 New Holland LS 170 skid loader has also been trouble-free, other than the replacement of 2 bearings and a couple of hydraulic hoses.”

New Holland TM155 tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Terry Wendorff, Winthrop, Minn. · Vol. 28, No. 2 (2004), p. 12

Terry’s “generally satisfied” with his 2003 New Holland TM155 tractor equipped with a Westendorf front-end loader. “It steers super easy and is highly maneuverable, and the hood lifts up for easy maintenance. The automatic transmission makes it easy to operate. My only complaint is that the fuel economy could be better. I installed a kit from New Holland that lets me operate the loader with a joystick.”

New Holland TN 60-A 2-WD tractor

1 Best Buy0 Worst Buys
Best Buy
Richard A. Marble, Farmington, Maine · Vol. 31, No. 4 (2007), p. 13

Richard nominates his 2005 New Holland TN 60-A 2-WD tractor as his “best buy”. “We use this tractor on our 136-acre farm for haying and for general farm work. We also use it to harvest wood for firewood and building materials. I’m pleased with how much power it has. So far it has been trouble-free.”

New Holland TN 60D 4-WD tractor

1 Best Buy0 Worst Buys
Best Buy
Donald Brown, Amissville, Va. · Vol. 36, No. 4 (2012), p. 14

Donald’s happy with his 2009 New Holland 50/50 4-WD tractor equipped with a floor shuttle transmission. “It’s a dependable, well-built tractor with a good view from the cab and simple features. At times the brakes make a loud rubbing noise, but I can live with that.

“My New Holland TN 60D 4-WD tractor has a left hand shuttle that goes into gear only when it wants to, which makes it a real nuisance. It once left me stranded in the middle of the road. I’ve spent about $2,000 at my dealer trying to solve the problem but nothing has helped. Also, the tractor doesn’t have enough road speed and power. If you want to do anything other than work a garden, this tractor is underpowered.”

New Holland TN65 tractor

1 Best Buy0 Worst Buys
Best Buy
Tommy Scoggins, Rock Hill, S.C. · Vol. 30, No. 4 (2006), p. 14

“My 2002 New Holland TN65 tractor has never been back to the dealer and is my best buy. My two brothers also own a TN65. They’re excellent, dependable tractors.

“I bought a pack of chain saw files designed to fit into a drill from Northern Tool, and it’s my worst buy. The files disintegrated before I could get the chain sharp. This company has gone to buying a lot of products from China, and as a result the quality has dropped tremendously.”

New Holland TN655 4-WD tractor

1 Best Buy0 Worst Buys
Best Buy
J.W. Heard, Naples, Texas · Vol. 31, No. 5 (2007), p. 15

“The only problem I’ve had with my 2005 Deere 310SG backhoe is when an electronic valve went out. Otherwise, this machine runs great and does everything I ask it to.

“My 2004 New Holland TN655 4-WD tractor had many problems during the first two years. The dealer had to replace two sets of wiring harness, as well as a starter, battery, and hydraulic pump. The tractor sat in the shop for about six months. Two weeks after the warranty expired I had to replace a throw-out bearing, and then a solenoid, starter, and battery as well as two cables to hydraulic valves. Also, almost every electronic switch has gone out.”

New Holland TN70A 4-WD tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Garen Reinking, Littleton, Colo. · Vol. 36, No. 4 (2012), p. 13

“I like my 2006 New Holland TN70A 4-WD tractor equipped with a Bush Hog M446 front-end loader. This tractor starts instantly in cold weather. It’s fuel efficient and handles most tasks suited for a 70 hp tractor with ease. It’s a reliable unit.

“Last year I bought a ditcher made by General Utility at our local Deere dealer. This unit is made in China and uses soft hollow steel for the shank and shoe holder. After traveling 50 yards making a 9-in. deep ditch at a very slow speed, the shank was already bent. By the time I went 75 yards the shoe holder was bent. The machine had no warranty.”

New Holland TN750 tractor

1 Best Buy0 Worst Buys
Best Buy
Robert Dumas, Long Lake, Minn. · Vol. 36, No. 4 (2012), p. 13

“I like my Stihl MS 260 and 026 chainsaws. I especially like the MS260 because it has compression release, which makes it easy to start.

“My New Holland TN750 tractor has a lot of power and is small enough to fit between rows of orchard trees.”

New Holland TR140 tractor equipped

0 Best Buys1 Worst Buy
Worst Buy
Trevor Atchison, Pipestone, Manitoba · Vol. 25, No. 6 (2001), p. 17

“My 1998 New Holland TR140 tractor, equipped with a front-end loader, is my worst buy. It’s a real lemon. The hydraulic system was faulty, which caused the loader to shudder severely when I dumped the bucket or lowered the loader. The extra pressure blew out a hydraulic hose. Hydrostatic lines began to leak slowly where they were crimped on, and O-rings blew on the hydraulic lines and also on coupling blocks. The couplers are poorly designed and spit oil at me whenever I uncouple them. The cab roof leaks, and the glass in the doors and windshield have broken more than once. The company now offers update kits. It took a year before they really stepped up to fix the problems.”

New Holland TR7S combine

0 Best Buys1 Worst Buy
Worst Buy
Jeff Harder, Walnut, Iowa · Vol. 24, No. 5 (2000), p. 15

“I’m well satisfied with my 2000 Micro Trak MT3405 spray monitor. It ensures an accurate spraying job every time. Whenever I powershift the gears on my tractor up or down, it adjusts within seconds. I like how each boom has its own calibrated width. It counts acres and spray volume accordingly.

“I’m pleased with my Gnuse rear mount bucket which I purchased 20 years ago (Gnuse Mfg., Arlington, Neb). It takes all the abuse I can give it. Dirt, manure, snow – nothing stops it.

“My 1981 New Holland TR7S combine was one of my worst buys ever. I didn’t have a lot of trouble with the combine itself, but the Ford engine in it was a joke. It was fuel efficient but was underpowered and tended to run hot. It needed a new block at 1,200 hours, and the front main went out twice at 1,900 and 2,000 hours. I finally traded it in for a 1994 Case-IH 1644, which I really like.”

New Holland TR 87 combine

1 Best Buy0 Worst Buys
Best Buy
Howard Braun, Saline, Mich. · Vol. 25, No. 4 (2001), p. 15

Howard owns a 1997 New Holland TR 87 combine. “I had some problems with it the first year while harvesting wheat. The dealer changed the concaves, which solved the problem. Now it works fine.

“We’ve had problems with Goodyear implement and front tractor tires. When the tires are about half worn they open up where they’ve been spliced together.”

New Holland TR88 combine

1 Best Buy0 Worst Buys
Best Buy
LeRoy Alt, Pacific, Mo. · Vol. 23, No. 4 (1999), p. 15

“It’s an excellent machine, a great value for the price,” says LeRoy, pleased with his 1997 New Holland TR88 combine. “It works great and dealer service has been outstanding.”

LeRoy lists his Hiniker 3300 field cultivator as a “worst buy”. “The frame is weak and has broken several times. The pivot bearing on the tandem axle doesn’t last more than a season at best. It also has a poor paint job.”

New Holland TR 89

1 Best Buy0 Worst Buys
Best Buy
Rob Joslin, Sidney, Ohio · Vol. 24, No. 3 (2000), p. 14

“It has unbelievable capacity for such a small combine,” says Rob, pleased with his New Holland TR 89. It’s equipped with an Ag Leader yield monitor which he says is also a “best buy”. “The monitor is pretty accurate and provides good information.”

He lists his Harvestore silo as one of his “worst buys” ever. “The first year I had it, our high moisture corn stayed in good condition, but after that I had to have the silo resealed twice a year at a cost of about $1,000 each time. I also had to have the corn unloader converted to a forage unloading unit because the corn unloader couldn’t get the corn out. To make matters worse my hogs wouldn’t eat the corn. I couldn’t sell the silo to the dealer because he said he already had too many silos sitting empty. I used the silo for about 10 years before I finally gave up on it.”

New Holland TR95S

1 Best Buy0 Worst Buys
Best Buy
Leonard Fehr, Gladstone, Manitoba · Vol. 12, No. 1 (1988), p. 14

Leonard Fehr, Gladstone, Manitoba: “My best buy is my 1981 Versatile 875 4WD tractor. It has over 3,000 hrs, on itand we have not spent $100 in repairs on it yet. It handles very well and has lots of power. Another best buy is our New Holland TR95S combine. It’s easy to set and has lots of capacity. The Cadillac of combines today. “My 1985 Case/IH 44-ft. vibra tiller cultivator is my worst buy. Axle bushings on the tandem wheels wore out the first season, They were replaced. The same thing happened all over again the next year. The wings on this machine always go deeper than the rest of the cultivator, which we fixed by putting spacers on the cylinders. It takes about 1/2 hour to set the cultivator right, The harrows are junk, They don’t have enough adjustment on them. If we didn’t have a good dealer, would have traded it off the first year.”

New Holland TS100 tractor

1 Best Buy0 Worst Buys
Best Buy
Cecil Bearden, Piedmont, Okla. · Vol. 37, No. 6 (2013), p. 14

“My Belarus 8345 and 825 4-WD tractors always start, even in winter. I use them to feed cattle. Both tractors have air- conditioned cabs, but the air conditioners were a U.S.-installed option and aren’t dependable.

“Even though I use these tractors almost every day, I’ve spent less than $300 on repair parts. They come with a centrifugal oil filter that can be washed out and reused. Fuel and hydraulic filters for these tractors cost only $10 apiece. The heater is a problem, though, as the engine never gets hot enough to heat up the cab. I haven’t found anything these tractors can’t pull.

“I bought my 2002 New Holland TS100 tractor used and equipped with a DuAll frontend loader. It had about 1,400 hours on it. However, within 3 weeks I had to replace the fuel injector pump, and then the fuel lift pump and sediment bowl. It has a clutchless shuttle shift transmission that works great for baling hay, but the gear indicator light doesn’t work in low range. Also, the tractor’s air ride seat wouldn’t stay inflated. After spending $200 on compressors and valves, I installed a new Wise seat made in Arkansas (www.wiseseats.com).

“At about 1,500 hours the loader’s hydraulic hoses started leaking at the fittings, and the 3-pt. top link failed while I was hooking up to a rototiller and nearly injured my foot. Another problem was that fuel started leaking from the sending unit inside the gas tank. The dealer couldn’t fix it so my only option was to buy a new $1,000 tank. Instead, I fabricated a steel ring that fits inside the tank and holds the sending unit in place. Now the tank is leaking only about a gallon of fuel per month.”

New Holland TS100A

1 Best Buy0 Worst Buys
Best Buy
Loyal Fulton, Selma, Iowa · Vol. 34, No. 4 (2010), p. 13

“Our New Holland TS100A is a great chore tractor. It has an excellent cab and is fuel efficient.”

New Holland TS115A tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Ted Johnson, Colesburg, Iowa · Vol. 36, No. 6 (2012), p. 15

Ted’s happy with his 2005 New Holland TS115A tractor equipped with a 6.7-liter engine and 24-speed transmission. “I use this tractor mostly for baling work. It has a lot of power and only uses 2 1/2 gal. of fuel per hour. It has about 1,000 hours on it with no problems.

“I’ve used my 2007 New Holland BR780A round baler to make about 9,000 bales with no problems. It makes fantastic bales with nice, smooth edges that weigh up to 2,300 lbs.

“My 2008 Ag-Bag G6060 pull-type bagger is my worst buy. The main gearbox recently had to be replaced for the third time with only about 200 bags made. Last summer the axle broke away from the main frame due to a poor factory weld. I should have kept the Kelly Ryan bagger that I traded in.”

New Holland TS6 loader tractor

1 Best Buy0 Worst Buys
Best Buy
David Reits, Niles, Mich. · Vol. 38, No. 1 (2014), p. 12

“I like my New Holland TS6 loader tractor and 2013 New Holland round baler. The dealer checks in often and makes me feel the company cares. All has been good.”

New Holland TS64 4-WD tractor

0 Best Buys1 Worst Buy
Worst Buy
Andy Johnson, Dewey, Okla. · Vol. 43, No. 3 (2019), p. 15

“My 1991 Dodge D250 4-WD pickup has more than 300,000 miles on it but is still always ready to go. I’ve used it to pull regular trailers, livestock trailers, and hay trailers.”

On the “worst buy” side, he lists his New Holland TS64 4-WD tractor. “Within 500 hrs. 2 clutch cables broke and the loader cable vibrated loose, and one of the door handles keeps vibrating loose. It takes 2 hrs. to change the oil because the filter is located behind the loader arm and fuel filter.”

New Holland TT45 tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Gene Exum, Brooksville, Florida · Vol. 33, No. 4 (2009), p. 15

A 2007 New Holland TT45 tractor equipped with a front-end loader rates as Gene’s “best buy”. “I’m a disabled vet so I appreciate a tractor that’s easy to get on and that has a comfortable work space. All the controls are easy to operate and conveniently located, and fuel efficiency is outstanding. I’m completely satisfied with this tractor.

“My 2003 Bush Hog 4-ft. mower is my worst buy. I used it the first year to cut heavy pasture for about 30 hours. Then I had health problems and the machine sat in the barn until last summer, when I tried to use it to cut some light underbrush that was less than 3/8 in. in diameter. The driveshaft got badly bent. I’m disappointed in this mower. I have a Bush Hog finish mower that I’ve used for more than 20 years.”

New Holland TW 65A

1 Best Buy0 Worst Buys
Best Buy
Mike Cox, La Pryor, Texas · Vol. 27, No. 1 (2003), p. 15

“My Deere 4400 4-WD tractor equipped with a front-end loader is my worst buy. The hydraulic pump went out every 80 to 90 hours when we first got it. Two weeks after the warranty expired the pump went out again. The tractor had only 326 hours on it.

“My New Holland TW 65A is the best small tractor I’ve ever owned.

“My 1998 Yamaha 600 Grizzly ATV is a best buy. I use it to pull trailers and for fence work, etc. No problems.”

New Holland TX66 combine equipped

1 Best Buy0 Worst Buys
Best Buy
Craig Shaw, Lacombe, Alberta · Vol. 22, No. 6 (1998), p. 14

“I only wish I’d found this machine sooner,” says Craig about his 1997 New Holland TX66 combine equipped with a 25-ft. Honeybee header. “It’s a well thought out machine from front to back. The header controls and vine lifters allow the machine to work equally well in lodged or standing crops. The back of the combine allows me to drop straw or chop it very fine with the flip of a lever. Performance outshines New Holland rotary machines when conditions are tough. I’m putting on fewer hours and doing more work with it than with the 1991 R-70 Gleaner I had before.”

On the other hand, one of Craig’s worst buys is his Sakundiak 65-ft. mechanical swing auger.

“While I had extremely good luck with their standard augers, I paid a premium price for this poor unit. We had numerous bearing failures but the worst problem was with shear pins. They broke off and were difficult to replace because of their location. I can’t afford to keep a machine that is not only slow but unreliable as well.”

New Holland TZ22DA compact tractor

0 Best Buys1 Worst Buy
Worst Buy
Steve Fuller, Clintonville, Wis. · Vol. 35, No. 6 (2011), p. 13

A New Holland TZ22DA compact tractor rates as Steve’s “worst buy”. “The hydraulic oil filter is located where it accidentally gets hit a lot so it starts to leak oil. There should be a guard on it.”

New Holland Workmaster 25S sub-compact 4-wd hydrostatic

1 Best Buy0 Worst Buys
Best Buy
Charles D. Rector, Milton, Ky. · Vol. 46, No. 6 (2022), p. 13

“My New Holland Workmaster 25S sub-compact 4-WD hydrostatic tractor is a best buy. It came with a loader and mower deck. It tills great with the 4-ft. tiller I purchased separately. The loader has been a back saver as I’m getting older.”

New Holland Workmaster 55 loader tractor

0 Best Buys1 Worst Buy
Worst Buy
Jeff Lutes, Thorndale, Texas · Vol. 42, No. 3 (2018), p. 15

Jeff nominates his 2012 New Holland Workmaster 55 loader tractor as his “worst buy”. “One month after I bought it a hydraulic hose on the loader started to leak, and then at 250 hrs. the tractor’s left brake locked up. I traded it for a Kubota, which works great.

“I’m impressed with my Lincoln air-powered grease gun (www.lincolnindustrial.com; ph 314 679-4200) and LockNLube grease coupler (www.locknlube.com; ph 603 795-2298). The grease coupler fits onto most standard grease guns and comes with a sliding sleeve that’s activated by a thumb lever. Activating the lever releases the coupler from the zerk. Now I don’t dread greasing equipment any more.”

New Holland Workmaster 70 tractor

1 Best Buy0 Worst Buys
Best Buy
Greg Kropf, Westphalia, Kansas · Vol. 42, No. 2 (2018), p. 14

“I like my 2016 New Holland Workmaster 70 tractor and 2017 New Holland T4 100 cab tractor equipped with a front-end loader. The Workmaster has a lot of pep, is economical, and is a nice size for raking hay and making small square bales. The T4 is fuel efficient and recently averaged an impressive 1.3 gal. per hour doing chores. It uses just 2 gal. per hour whether pulling a Deere 15-ft. no-till drill or my Deere 630 disc mower conditioner. The cab is fairly quiet and has a nice air seat, and the air conditioner and heater work good. However, side access to the filters is awful, and the front lights on the cab aren’t very intense and can’t be aimed downward.

“My worst buy is a 2015 Kioti PX9020 tractor equipped with a cab and front-end loader. It was built by people who have never farmed in the U.S. It’s extremely noisy with a lot of engine, gear, and hydraulic noise. It has low torque and power, and uses about 4 gal. per hour no matter how I use it. The fuel gauge screams empty after just 6 hrs., the forward/reverse gear shifter is balky, and the hydraulics don’t lift at their rated capacity.

“After the tractor spent six weeks at the dealer during the height of hay season, I decided it was time to trade. My offer to Kioti to have them come out to my farm and evaluate the performance of their tractor on an American dairy farm is still open.

“We’ve tried several different float valves on our stock tanks but are still looking for a good valve that can handle solar-pumped pond water. Hudson water valves flow good but plug about every month, sticking in the flow position and overflowing the tanks. Brown Weight valves flow good, but plug up in less than 24 hrs. ROJO (Jobe) valves have never failed us, but their low water flow simply can’t keep up with a herd of cattle. The most reliable valves we’ve found are made by Dare-O-Matic (www.dareproducts.com; ph 800 922-3273). They don’t flow as fast as Hudson valves, but they never plug or fail.”

New Holland Workmaster 70 4-WD loader tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Matthew Trail, Pipestem, W. Va. · Vol. 42, No. 2 (2018), p. 14

“I like my 2017 New Holland Workmaster 70 4-WD loader tractor equipped with a 7-ft. wide bucket and front-mounted bale spear. I’m amazed at how strong, reliable and easy to use this tractor is. I use it for bush hogging, hay making, loader work and other jobs. It was a great investment, and I plan on using it for the rest of my life.”

New Holland self-propelled 2450

1 Best Buy0 Worst Buys
Best Buy
Lawrence Boden, St. Clair, Mich. · Vol. 32, No. 6 (2008), p. 13

“My 2004 New Holland self-propelled 2450 Speed Roller haybine is my best buy. It cuts well and does a good, clean job. It requires very little maintenance, and parts for it are readily available.”

New Holland model 256

1 Best Buy0 Worst Buys
Best Buy
Ray Sipple, Alexandria, Ky. · Vol. 32, No. 3 (2008), p. 14

“Farmers in our area really like New Holland model 256 Rollabar rakes. They skip less hay in low dips and in tight corners, and they turn easier in tight corners. The axle on these rakes isn’t straight but is tucked up close behind the basket. As a result, this rake works well in small, hilly, irregular-shaped fields.

“We like our two Jeep Cherokees. However, one of them recently developed a loud banging noise that was intermittent at first and then became steady and loud. Several mechanics told me I should replace the engine, but I wasn’t so sure. As it turned out, the problem was a cracked flywheel which I was able to fix for only $65.

“I really like my Kubota B2150 tractor. but I didn’t change the hydraulic oil filter for a long time. Last spring, apparently a plastic part that resembled a washer disintegrated and pieces of it got stuck in various places inside the transmission and hydraulic system. A dealer fixed it in two or three stages, trying to save me money. The problem became evident when the filter pressurized and ruptured. Now after replacing three or four filters and spending $1,300, it works fine. Even expensive filters look cheap after that experience.”

New Holland mower conditioner

1 Best Buy0 Worst Buys
Best Buy
Dean Duwa, Ainsworth, Iowa · Vol. 46, No. 1 (2022), p. 15

“My best buy was the 492 New Holland mower conditioner I bought in 1993. I’ve also had a New Holland square baler since 1973. Both of them were always dependable.

“However, this year I bought a 109 New Holland disc mower which cost me an extra $ 2,740 in repairs before I could get 40 acres mowed. They would not stand behind it. I’m done with New Holland; they won’t get another dime from me.”

New Holland sent

1 Best Buy0 Worst Buys
Best Buy
Kenneth Bernard, Wabasso, Minn. · Vol. 17, No. 5 (1993), p. 15

Kenneth Bernard, Wabasso, Minn.: “My worst buy is a manure spreader that I recently purchased from H & S Mfg. It's designed to handle both solids and liquids, = ; tractor would bum up. We asked Farm Bureau to send out a fire investigator. He said he will send us a report soon. Ford_ New Holland sent out a couple of people but they haven’t yet been able to deter- mine the cause of the fire. The fire started } under the cab. The operator had no warning from any gauges that anything was wrong with the tractor. There was only time to tum off the ignition key and getoff the tractor before it was completely engulfed in flames.” but it leaks liquid manure like a sieve. If 1 had to haul very far wouldn’t have anything to unload by the time I got there. The - company is supposed to solve the problem, but they’ve been slow to do anything.”

New Holland ever

1 Best Buy0 Worst Buys
Best Buy
Stanley Miller, Lakek Park, Minn. · Vol. 14, No. 3 (1990), p. 13

Stanley Miller, Lakek Park, Minn.: “It ) keeps on stacking load after load of hay and has to be one of the best pieces of equipment New Holland ever made,” says Stanley, happy with his 1974 New Holland 1033 stackliner. Stanley's also pleased with his 1985 Dodge W-250 pickup. “It has 45,000 miles but runs and looks like new, I mounted a DMI cushion bumper hitch on it which takes a lot of the jerk out when pulling wagons.”

New Holland skid loader fan

0 Best Buys1 Worst Buy
Worst Buy
Steven Fluit, Hull, Iowa · Vol. 42, No. 5 (2018), p. 14

Steven’s impressed with his 2018 Kubota SSV75 skid loader. “It only has about 200 hrs. on it, but no problems so far and I absolutely love it. It has a roomy cab, responsive controls, a lot of power, good hydraulics, and awesome engine serviceability. The loader has a well-designed hydraulic quick-attach coupler with no wedge pins on the pivot points. The machine comes with a quick exit sliding front cab door that isn’t nearly as difficult to open and close as I thought it would be.

“I was a big New Holland skid loader fan until I looked into trading my 2010 model for a 2018. There isn’t enough room by the foot pedals in the new machine for my size 13 boots, and the cab is small with terrible visibility. However, my biggest turn-off is the engine compartment. I do a lot of my own repair work, but I’m not going to stand on my head just to work on a machine’s engine.”

New Holland model 254 hay

0 Best Buys1 Worst Buy
Worst Buy
Jerry Stoner, Downing, Wis. · Vol. 15, No. 5 (1991), p. 14

Jerry Stoner, Downing, Wis.: Jerry's “worst buy” is his New Holland model 254 hay rake and tedder. “The grease zerks won't take grease and fall outof their plastic bushings. It works too rough when raking hay - all that’s left is the stems. “My Gehl S-wheel rake doesn’t pick up hay on uneven ground. It takes two hours to set il into the right raking position.” “My New Idea Discbine is a best buy, It cuts tangled hay, doesn’ ttakealotof power, and it’s simple to grease. It lets me cut hay as fast as the tractor can go.”

New Holland auger head

1 Best Buy0 Worst Buys
Best Buy
Delbert Bauersachs, Pinckneyville, Ill. · Vol. 40, No. 4 (2016), p. 12

“In 2012 I bought a new New Holland 35-ft. auger head for my New Holland CR7090 combine, but the new head wouldn’t float like my old head did. The dealer worked on it for two years but could never get it to work right. I called the company but got no help. I finally solved the problem by trading this auger head in for a new MacDon draper head. Now my New Holland combine will out cut any green or red machine. Our family has three New Holland combines, all equipped with MacDon heads.”

New Holland hay header

1 Best Buy0 Worst Buys
Best Buy
Steve Meerman, Coopersville, Mich. · Vol. 27, No. 5 (2003), p. 12

“The 1986 New Holland 16-ft. hay header we use on our bi-directional tractor is our best buy. We use it to cut 500 to 1,000 acres every year. It still has all the original bearings, which I think is amazing.”

New Holland skid steer loader

1 Best Buy0 Worst Buys
Best Buy
Lorne Orr, London, Ontario · Vol. 32, No. 2 (2008), p. 14

“It never gets less than 50 mpg and gets more than 60 mpg at times,” reports Lorne about his 1998 Volkswagen Jetta equipped with a diesel engine. “I don’t know why more vehicles aren’t available with diesel engines. This car is dependable and economical.

“I use my New Holland skid steer loader every day and it’s a best buy. I couldn’t farm without a skid loader.

“Reading and following the owner’s manual often makes the difference between best and worst buys.”

New Holland model

1 Best Buy0 Worst Buys
Best Buy
Donald H. Petersen, Sebeka, Minn. · Vol. 21, No. 1 (1997), p. 16

will easily outperform competing combines. However, it unloads slow and the unloading auger doesn’t reach high enough to allow dumping into a semi tractor trailer. Routine maintenance is a pain. For example, there’s no fast, easy, way to adjust the rear concave. Also, the lower ‘frame’ of the combine is built rather weak. When I jack up the front of the combine, I have to be careful where I place the jack in order to keep from cracking the frame. The radiator air intake clogs up easily, the engine doesn’t start in cold weather, and I have to replace the starter every two years or so. I use the company’s 1143 corn head with it and it’s one of the best I’ve ever seen. If I were in the market for a new combine I’d buy a New Holland model. New Holland combines have comfortable cabs with easy-to-reach controls and are powered by the Genesis engine. My New Holland 8970 tractor has the same engine and it’s a great one.”

New Holland quick tach mounting

1 Best Buy0 Worst Buys
Best Buy
B.D. DeJager, Maurice, Iowa · Vol. 21, No. 3 (1997), p. 15

He likes hisNew Holland quick tach mounting plate for the front of his skid steer loader. “It’s a rigid, double reinforced steel plate that can be attached to any implement without having to reinforce it. Makes it easy to mount our new mini backhoe.”

New Holland combine owner

1 Best Buy0 Worst Buys
Best Buy
Edward Huppert Jr., Salem, Neb. · Vol. 15, No. 3 (1991), p. 13

Edward Huppert Jr.,Salem, Neb.: “It's one of the best buys I've made in a long time,” says Edward, pleased owner of a Case-IH 1660 combine. “It’s a wonderful machine to set and to operate. I’d never buy anything else. I had been a New Holland combine owner.” Ear! Hanson, Newfolden, Minn.: Earl's 1985 Chrysler New Yorker car has more than 100,000 miles. “It still runs and looks like new, making ita best buy. It’s equipped with a 2.2 liter turbocharged engine. “My 1982 Case 2390 tractor is also a best buy. I bought it used in 1986 with 875 hours. Now it has 1,875 hours with no problems.”

New Holland roto-cut big square

1 Best Buy0 Worst Buys
Best Buy
Ernest Erdmann, La Crescent, Minn. · Vol. 34, No. 2 (2010), p. 15

“My 2005 New Holland Roto-Cut big square baler makes nice, tight bales. It’s equipped with a Harvest Tec automatic preservative applicator that works nice. With the Roto-Cut feature I can cut the crop to any length I want, from 1 ½ in. to full length. It works in any type of forage, even corn stalks. The company has made some changes on new models that should work even better.”

New Holland rakes

1 Best Buy0 Worst Buys
Best Buy
Jerry Josefy, Grandfield, Okla. · Vol. 17, No. 3 (1993), p. 14

Jerry Josefy, Grandfield, Okla.: Jerry's had good luck with his 1989 Deere 4455 MFWD tractor. “It always starts, is easy on fuel, and has a comfortable cab with a good air condtioner. It has a lot of power for a small tractor and I really like the powershift transmission - works great for plowing, baling, etc. It has good lights and doesn’t use any oil. No problems. It also has good resale value.” A 1992 Deere 673 hay rake heads his “worst buy” list. “I decided to replace one of my old New Holland rakes with the Deere model. However, it didn’t have as many grease zerks and also didn’t clean hay off the ground as well. In heavy windrows the drive wheels would slide whereas the drive wheels on the New Holland rake continued to turn. I traded it back in.”

New Holland hay turner

1 Best Buy0 Worst Buys
Best Buy
Allen Hoffman, Hampton, Minn. · Vol. 24, No. 5 (2000), p. 15

Allen’s pleased with his 1998 New Holland hay turner. “It’s gentle on the hay, turning it upside down and fluffing the windrow up which really cuts down on drying time. No side delivery rake can come close to matching its performance. I can travel as fast with it as the ground will permit.”

New Holland swather

1 Best Buy0 Worst Buys
Best Buy
Wayne A. Stuhr, Wellton, Ariz. · Vol. 20, No. 1 (1996), p. 15

A 1995 New Holland swather rates as Wayne’s “best buy”. “It works well and has had few problems. “We’re happy with our Deere 4955 MFWD tractor which we bought used four years ago.”

Read every report in full

FARM SHOW has run reader Best & Worst Buys since the beginning.

Subscribe to FARM SHOW