Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Issues › Vol. 1, No. 5 (1977)

Best & Worst Buys: FARM SHOW Vol. 1, No. 5 (1977)

20 reports from pages 10–11 · 20 Best Buys0 Worst Buys · See everything in this issue at FARM SHOW →

Best Buy

Dick Rasmussen, Ostrander, Minn · Vol. 1, No. 5 (1977), p. 10

Dick Rasmussen, Ostrander, Minn: Dick Rasmussen, Ostrander, Minn. ‘‘The best thing I like about it is that it has so linate SUYS much power we never found all of it, You could keep putting the 2670 in higher gears and still pull the implement. It is very quiet, comfortable, has good vision and handles extremely well. Last but not least, it’s a lot cheaper than J.D., which used to have.”

See this page at FARM SHOW →
Best Buy

Chevrolet + 1 more

Harry Tuma, Cut Bank, Mont · Vol. 1, No. 5 (1977), p. 10

Harry Tuma, Cut Bank, Mont: Harry Tuma, Cut Bank, Mont., of his new Steiger Turbo Tiger. “Our down time has been almost nil."’ Also high on Harry's ‘“‘best buy” list is a Harley rock picker, manufactured at Clarissa, Minn. He's disappointed, however, in Goodyear innertubes used in his Steiger tractor and a '76 Chevrolet pickup, pointing out that “the seams on the tubes are faulty. Even though they give an adjustment on the tubes, it doesn't begin to help pay for the chloride in the tires, or the service calls.” A new Case 2670 tractor earned a “best buy” vote from

See this page at FARM SHOW →
Best Buy

John Deere

Ronald Whitlock, Carrollton, Ill · Vol. 1, No. 5 (1977), p. 10

Ronald Whitlock, Carrollton, Ill: Ronald Whitlock, Carrollton, Ul., says his Deere 4230 diesel tractor, purchased new in ‘74, “has a good motor, transmission and final drives but it has the worst hydraulics I've ever seen, It's been in our dealer's shop about five months out of the last three years just for hydraulic trouble. And it’s. still not right,’ reports Ronald, who adds that his new Deere 7000 planter (8 30-in rows) is “the best corn planter I've ever seen. We got a beautiful stand of corn with it this year, The soybean metering units leave a lot to be desired, however. They are not very accurate. Too much guesswork and scratching and digging.” Here's how other randomly selected readers size up their recent tractor purchases:

See this page at FARM SHOW →
Best Buy

Massey Ferguson

Don Reynolds, Farnhamville, Iowa · Vol. 1, No. 5 (1977), p. 10

Don Reynolds, Farnhamville, Iowa: Don Reynolds, Farnhamville, Iowa: He's well pleased with his Massey Ferguson 1155 tractor, with M and W turbo, but doesn’t like the way it rides: ‘The turbo is real nice and makes the tractor 180 hp, The spring mounting under the seat is very poor. I've ordered an air base to put under the seat. It was in the Charter Issue of FARM SHOW. I called the company and found a dealer near

See this page at FARM SHOW →
Best Buy

John Deere + 1 more

Earl Youngblut, LaPorte City, Iowa · Vol. 1, No. 5 (1977), p. 10

Earl Youngblut, LaPorte City, Iowa: Earl Youngblut, LaPorte City, Iowa: He's happy with his 8630 Deere tractor (“performance has been very good to this point; costs are high but dealer service and warranty very good") but faults Deere for a series of problems with a newly-purchased, 1977 model 7700 combine: “In less than one hour field time, it lost all the hydraulic oil, Very disappointing. Wiring is still poor. Seat still needs improving in regards to leg rest height and accessibility to service the area below.” Albert Meyer, Jr., Gaylord, Minn.: “It has given good performance and has a very good cab and is easy to service,’ says Albert of his “best buy" Deere 8630 tractor, purchased in 1975. “I bought it from a dealer that gives good service and from a company that stands behind their products.” He thinks his IH 700 plow (nine 18-in bottoms) “could have some improvements to it. The land wheel should be in a better place to give the plow better stability. If] were to buya new plow, I'd get the 800 flex frame plow instead."

See this page at FARM SHOW →
Best Buy

International Harvester

Larry Dykstra, Bigelow, Minn · Vol. 1, No. 5 (1977), p. 10

Larry Dykstra, Bigelow, Minn: Larry Dykstra, Bigelow, Minn.: He's well pleased with his new International 1086 tractor. ‘‘I really like the quiet ride in the cab and good visibility. get the best of service out of my dealer.” He's also happy with his new IH V-chisel subsoiler with automatic reset. ‘Does a nice job and there are no shear pins with the automatic reset,’’ he points out.

See this page at FARM SHOW →
Best Buy

Allis-Chalmers + 1 more

Vernon Virgin, Lebanon, Ill · Vol. 1, No. 5 (1977), p. 10

Vernon Virgin, Lebanon, Ill: Vernon Virgin, Lebanon, III: “We examined specs on several 4-wheel drives and chose Allis Chalmers (model 7580) because of dealer availability and price. Most pleased with first 100 hrs. performance and the dealer's cooperation when problems did develop.” Vernon registered strong disappointment with his “Big Dooley” Chevrolet series 30 truck with crew cab and 454 motor: “Chevrolet truck division does not help solve engineering problems involved with poor performance and oil consumption of the 454 cu. in. engine. They give the impression I’m the only one having the problem. I know better.”

See this page at FARM SHOW →
Best Buy

John Deere + 2 more

Clayton Berg, Hendrum, Minn · Vol. 1, No. 5 (1977), p. 11

Clayton Berg, Hendrum, Minn: Clayton Berg, Hendrum, Minn.: ‘' got a new 8430 John Deere. It does everything planned for it to do. The Fargo Implement, Fargo, N. Dak., gives the best service for parts and repairs. have been very satisfied with them,” An Illinois reader reports that in the past 12 months he has purchased “a used IHC 966 diesel tractor, used New Holland 469 Haybine and a new LHC 480 disc: No problems. Everything and everyone performed as expected.” Another reader cites his Big Bud tractor, from Northern Mfg., Havre, Mont., as his “best” buy: "A quality made tractor with very good service.” A Wisconsin reader who didn't sign his name nominated a White 2105 tract’ * as his “best” buy. As in previous FARM SHOW buying surveys, sloppy workmanship at the factory was a frequently mentioned complaint. “The workmanship was lousy,” says Louis Herdegen, Birdtail Ranch, Chinook, Mont., of his 1855 White tractor which he purchased new. “It was only half put together and was nothing but one big pain.” Louis is well pleased with two Ban-A-F ly electronic f'y control units from the Schlueter Co.: “Have two in the farrowing house and they really are flashing and popping all the time. They surely seem to be doing their jobs of getting rid of flies."

See this page at FARM SHOW →
Best Buy

Roger Kopp, Maiden Rock, Wis · Vol. 1, No. 5 (1977), p. 11

Roger Kopp, Maiden Rock, Wis: Roger Kopp, Maiden Rock, Wis., says his 3200 IH Skid Steer loader “has leaked hydraulic oil somewhere from the first day bought it. This leak has never been found by the dealer or company.” Heading his “best buy” list is an Ashland scraper for a 4-wheel drive tractor: “I build my own waterways and ditches. had my doubts if could pull it or not but it’s no problem at all. The scraper holds 8 yds. heaped and 6 yds. level full. One set of hydraulic hoses is all that is needed for operation. It goes from load-haul-dump and back to load in one complete cylinder cycle.”

See this page at FARM SHOW →
Best Buy

Marvin Hengelfelt, Stromsburg, Neb · Vol. 1, No. 5 (1977), p. 11

Marvin Hengelfelt, Stromsburg, Neb: Marvin Hengelfelt, Stromsburg, Neb.: He reports that his Deere MaxEmerge planter (6 row) ‘fulfilled all expectations with the exception of a need for attachments to incorporate insecticide for rootworm control which I will have toadd to the planter for next year as had some rootworm damage this year. Ralph Weems, Jr., West Point, Miss.: He’s well pleased with a 12

See this page at FARM SHOW →
Best Buy

International Harvester

Thomas Small, Walton, Ind · Vol. 1, No. 5 (1977), p. 11

Thomas Small, Walton, Ind: Thomas Small, Walton, Ind., regarding his recently purchased IH 1650 Hydro Cadet which he notes is “heavily built and does a nice job.” “A machine with a price tag this high should be close to perfect when leaving the factory. One little part — a metal depth regulator — stripped its thread the first time it was used. Such ashame to taint a good machine with one little cheap part. The steering linkage was set at the factory about 1/3 to the right. Changing it was nothing difficult but was aggravating on a brand new machine. The belt tightener has never worked good and never will with its design. We have ruined two belts already," Thomas explains. He compliments Kewanee on their model 88 15-ft. cultimulcher: “It's heavily built. The transport wheels and linkage are superb. In the field, the mulcher flexes and yet, in transport position, it is rigid and does little flapping. Can be towed at 20-30 mph. Clearance between teeth and rear wheels is great — much more than other brands. This is about the fifth or sixth cultimulcher we have used, and this is the first that really did a great job. Many fields could have been prepared with one trip over.” Workmanship at the factory is very poor on this machine,"

See this page at FARM SHOW →
Best Buy

International Harvester

Gary Ashburn, Blue Mound, Ill · Vol. 1, No. 5 (1977), p. 11

Gary Ashburn, Blue Mound, Ill: Gary Ashburn, Blue Mound, UL; He notes that his IH 500 Cyclo 12-row planter “has three moving sections of 4 rows each. The four middle rows won't plant the same depth as the four outside rows on each side.” Gary faults his Flowtron electronic fly killer, noting that it won't last more than 3 weeks until the transformer burns itself out.” He’s pleased with a new 490 IH flex wing disk (“does a real nice job for a 32 ft, disk") and a Glencoe Soil Saver chisel plow (“covers the trash, doesn’t plug up and opens the ground to stop erosion").

See this page at FARM SHOW →
Best Buy

Larry Johnson, Cologne, Minn · Vol. 1, No. 5 (1977), p. 11

Larry Johnson, Cologne, Minn: Larry Johnson, Cologne, Minn.: “This machine gave me a_ perfect stand of corn and beans in one trip over last year's corn stubble, saving me time and expense, and conserving moisture,’ says Larry of the Buffalo Till Planter he bought new last March. Jerry Grady, of Grady Farms, Syracuse, Ind.; He had problems with Demco fertilizer placement shoes on a new 7100 Deere MaxEmerge folding toolbar planter. ‘Due to the fact that they had to be installed between the seed placement disks, they placed the liquid starter fertilizer too close to the seed and, as the roots began to grow, the fertilizer burned the roots off. As a result, we had 300 acres of corn to replant. We have several neighbors who had the same condition and also know of sev

See this page at FARM SHOW →
Best Buy

International Harvester

Milton Boline, Centerville, S. Dak · Vol. 1, No. 5 (1977), p. 11

Milton Boline, Centerville, S. Dak: Milton Boline, Centerville, S, Dak.: He nominates his IH 400 Cyclo planter and the monitor that came with it as his “best” buy: “The monitor relieved me of the worry that the planter wasn’t planting. As soon as one of the rows would plug the buzzer would go on and indicate which row wasn't planting. And, “Such a shame to taint a good machine with one little cheap part.”’ when [ came to the end and raised the planter, the buzzer would sound so would know it was working.” Milton adds that “there really wasn't any product that was dissatisfied with. My wife is unhappy with Shout — says it doesn’t do the job they advertise in removing spots from clothing.”

See this page at FARM SHOW →
Best Buy

Byron Boddy, Lovington, Ill · Vol. 1, No. 5 (1977), p. 11

Byron Boddy, Lovington, Ill: Byron Boddy, Lovington, IIL: He's unhappy with his Dodge W-300 truck: “This is a one-ton, 4-wheel drive, dual rear wheel model. The motor overheats. It has all the extra coolers etc. but gets hot. In fact, so hot the automatic fluid boils and the truck stops pulling. Dealer pats my head and shakes his but doesn't do anything. Factory doesn’t know me. It also shimmies — but same answers,”” -S— FARM SHOW () 11

See this page at FARM SHOW →
Best Buy

New Holland + 1 more

Norman Trost, Ronan, Mont · Vol. 1, No. 5 (1977), p. 11

Norman Trost, Ronan, Mont: Norman Trost, Ronan, Mont: ‘He reports “excellent results” with his New Holland hydrostatic — selfpropelled model 1112 swather: “The twin sickles allow me to cut much faster than my previous single sickle machine. The cab is comfortable, dust free and quiet with the exception of the hydrostatic whine."’ Norman is disappointed with his Deere baler model 466: ‘Since I’ve had it, the main pitman and shaft have had to be replaced. The cluster gear popped a tooth, allowing it to go out of time which broke both needles and split one knotter in half. The needle lift frame has had to be taken off and straightened, and several sealed bearings have gone out already.”

See this page at FARM SHOW →
Best Buy

John Deere

Patrick Birgen, Alcester, S. Dak · Vol. 1, No. 5 (1977), p. 11

Patrick Birgen, Alcester, S. Dak: Patrick Birgen, Alcester, S. Dak.: “It took one year to the day when it ran right,” says Patrick of his Deere 200 Stackwagon. "The thing was supposed to be new, but the way it ran and the service we got was terrible. Everything that went wrong, almost, was blamed by the company on the person who was running it."’ Patrick is well pleased with products and services from the Murphy Feed Co. “I tried their product several years ago and it is astounding the way they have progressed according to other companies. The service is also out of this world," says Patrick.

See this page at FARM SHOW →
Best Buy

New Holland

Turner Ranch, Moore, Mont · Vol. 1, No. 5 (1977), p. 11

Turner Ranch, Moore, Mont: Turner Ranch, Moore, Mont.: New Scotch Brand ATP-200 baler twine from the 3-M Co. didn’t live up to his expectations: “This plastic twine just won't work in a New Holland SP 1282 baler,” Kenneth Turner reports. “It shreads as it’s pulled around the bale and then breaks.” On the plus side, Kenneth lists a Speed King 8 in, by 46 ft. pto-driven grain auger as a “best buy’: “This auger has worked real nice and can unload a big load of grain into a tall bin in a hurry. It is built strong and should last a long time.”

See this page at FARM SHOW →