Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › New Holland › 790

New Holland 790 forage harvester

What FARM SHOW readers say · 1 Best Buy2 Worst Buys · Tractors

New Holland 790 forage harvester

1 Best Buy2 Worst Buys
Best Buy
Wayne Grebinoski, Holdingford, Minn. · Vol. 20, No. 2 (1996), p. 15

Wayne’s the owner of a “best buy” 1994Bobcat753 skidsteer loader. “It’s truly a well-built product. It’s my second Bobcat and both have performed very well. They’re easy to service and trouble-free. We use them every day to load manure, move round bales, haul silage, etc. They always start right up no matter what the conditions. I’d definitely buy another one.

“I like my 1993 New Holland 570 square baler. It has a lot of capacity and does a good job of tying bales.”

On the minus side, he lists his Gehl 1060 forage harvester. “It seemed that I couldn’t use it for even a single day without something going wrong on it. Soon after it was delivered to our farm the wheel bearings went out. The roller chains wore out fast and other bearings also went out. The blower bands lasted for only one season. It has a lot of capacity but requires a lot of power. Also, parts for it were expensive. I got rid of it and bought a 1995 New Holland 790 forage harvester which I really like. It’s much easier to service and pulls easy.”

Worst Buy
Donis Willigar, Patten, Maine · Vol. 15, No. 5 (1991), p. 12

Donis Willigar, Patten, Maine: He's unhappy with his 1989 New Holland 790 forage harvester that he uses in both corn and hay. “It doesn’t have enough capacity and continually breaks shear pins. Another problem is that the welding on a collar protecting a pair of shafts on the gearbox keeps breaking. It has broken three times so far. Recently we've had trouble with the splined end of one of the shafts chewing out the inside of the collar, ruining the collar and the shafts. The dealer repaired it. This all happened during our first silage harvest. “We contacted the company and asked them to pay the repair bill and for the cost of transporting the machine. They toldus they’d pay for part of the repair bill, but not for transport. The company admitted that this model was built with a couple problems and that our machine has both of them. “Last year the collar broke again. We made more phone calls to the company, dealer, and factory representative. LastJuly, the factory representative and a dealer mechanic came out and worked on the machine. We tried to get the company to take back our machine and give us a new one, but they refused. We honestly feel that there's no way that this will ever be a good ominate t Buys machine. It'll always be a headache for us. No amount of money can replace the down time and the losses from not being able to harvest our silage when it was ready. No ‘sorries’ or apologies will help fill the silo. I wish I had never bought it.” Donis says his 1990 New Idea model 5409 9 ft. 2 in, disc mower is a “best buy”. “It does a super job of cutting. It's very maneuverable, trouble-free, and is easy to service,” Doug and

Worst Buy
David Barker, North Leeds, Me. · Vol. 14, No. 3 (1990), p. 13

David Barker, North Leeds, Me.: “The air cooled engine on my best buy Same Mercury 85 tractor runs great and is very fuel efficient.” David’s also pleased with his 1988 165ft. Badger belt feeder and 24-ft. conveyor. On the “worst buy” side is a New Holland 790 chopper. “The first year the feed roll side plate wore out which prevented me from sharpening the knives. The dealer fixed it but still tried to charge $960 to sharpen them. The company eventually paid for it. Since then 2 more feed roll side plates have worn out and the dealer doesn’t know what to do. The second year the metal alert mechanism quit. The dealer mechanic couldn't follow the wiring diagram in the manual and couldn't find the chopper’s electric clutch. The result was $260 down the drain, We called another dealer 100 miles away who hasn't been able to fix it yet. I’ve tried calling the service center listed in the owner’s manual many times, but no one answers the phone. So far I've spent $1,300 and it still doesn’t work.”

Own a New Holland? Tell FARM SHOW how it’s held up.

Your report could appear in a future issue.

Send your Best or Worst Buy

More New Holland products

New Holland TC40 tractor 3 best · 0 worstNew Holland Workmaster 40 tractor 2 best · 0 worstNew Holland 5610S tractor 1 best · 1 worstNew Holland 570 square baler 4 best · 0 worstNew Holland Boomer 40 loader tractor 3 best · 0 worstNew Holland TN55D tractor 1 best · 1 worstNew Holland 460 round baler 1 best · 2 worstNew Holland L175 skid loader 2 best · 0 worstNew Holland BR740 round baler 1 best · 1 worstNew Holland 55 hp compact tractor 3 best · 0 worstNew Holland TC29 tractor 2 best · 0 worstNew Holland C232 skid loader 2 best · 0 worstNew Holland 565 skid loader 2 best · 0 worstNew Holland T4-100 tractor 2 best · 1 worstNew Holland TS6.110 tractor 2 best · 0 worstNew Holland 848 round baler 3 best · 0 worstNew Holland TC-40 4-WD tractor 2 best · 0 worstNew Holland L220 skid loader 1 best · 1 worstNew Holland discbines 1 best · 2 worstNew Holland TC33D tractor 2 best · 0 worst

See all New Holland reports →