U.S. General 5-drawer rolling toolboxes
“About 1 1/2 years ago I bought two U.S. General 5-drawer rolling toolboxes from Harbor Freight. I use them in my welding/repair shop every day and they work great.”
62 reports from pages 12–15 · 58 Best Buys14 Worst Buys · See everything in this issue at FARM SHOW →
“About 1 1/2 years ago I bought two U.S. General 5-drawer rolling toolboxes from Harbor Freight. I use them in my welding/repair shop every day and they work great.”
Kevin likes the Reel-Quik Hitch he mounted on back of his pickup (www.hitchrific.com; ph 501 821-0000). “I have to hook up trailers by myself and this hitch saves me a lot of time and aggravation. I can back up to within about 18 in. of the trailer hitch and then reach out the last few inches with the Reel-Quik, set the trailer on the ball, and then reel it back in and lock it in place. It’s a great product.”
“We recently retired to five acres in Arizona, and I wanted a multi-purpose tool to maintain the trees and shrubs in our yard. I looked at several different brands before settling on the Stihl Kombi Tools. I started with the hedge trimmer/pole pruner combo.
“This tool has exceeded my expectations and has our place looking great. It’s lightweight, which I like since I’m getting older, and the adjustable shoulder strap on it fits me perfectly. I like this product so well that I recently bought a Stihl Kombi blower/vacuum unit. It makes cleaning up our yard an easy job. After six months of steady use, no problems.”
“In 1974 I bought a Black & Decker 4-in. portable grinder equipped with a squeeze on/off switch. I worked this grinder hard, for 30 years shoeing horses and sharpening mower and chopper blades. It always performed great. Last year I finally replaced it with a Dewalt.”
“Over the years I’ve owned five different Kubota machines and still have three of them – an L3010 tractor equipped with a 6-ft. belly-mounted mower; a ZD331 riding mower equipped with a 6-ft. deck; and an RTV 1120D utility vehicle. All of them work great. The utility vehicle rides nice and pulls amazingly well - I’ve used it many times to pull trucks and trailers out of the mud.”
Photo: FARM SHOWEarlier this year Makita introduced a new battery-powered 7 1/4-in. circular saw.
Read the whole story →Read more at FARM SHOW →“My PlasmaCAM computer-controlled cutting table worked only occasionally from day one. It would work okay for 5 min. but then stop, and sometimes it would even take off cutting across a 4 by 8-ft. sheet of steel and ruin the entire sheet. When this cutting table does work right it’s an amazing device. But I contacted several people who were selling their units on eBay, and none of them had anything good to say about the machine or the company’s tech support.”
“We found our 1984 Deere 314 garden tractor in a barn a few years ago, and it’s still running great. The Kohler engine has plenty of power, is easy on fuel, doesn’t use oil, and is easy to maintain. We use this tractor to mow 2 acres of grass every 4 to 6 days. Most of the time I can still get parts from my dealer. This tractor is bullet-proof, and I’d buy another one.
“Our 1450 Cub Cadet garden tractor steers hard and doesn’t do a good job of mowing, even with new blades and deck bearings. The wheel spacing on back of the tractor is too narrow, and as a result it just doesn’t cut grass like our Deere. Parts are sometimes hard to find. If our dealer has to order them it takes 2 to 5 days. I plan to sell this tractor and buy another Deere.”
“I bought a Cyclone Rake new in 2007. It’s still in great shape and works like new. Picks up leaves well with no hand raking needed. Wise investment for the cost. And a great time-saver. Folds flat for storage with removeable wheels and motor for easy storage.”
“My Deere 3220 32 hp. tractor has plenty of power to operate my 5-ft. Land Pride rotary cutter and my 6-ft. finish mower. It also has a nice road speed.”
“My Metabo W9-115 4 1/2-in. angle grinder runs at 10,500 rpm’s and has a lot of power. I’ve used a lot of 4 1/2-in. angle grinders throughout my working career, but this one is the best.
“I’m not happy with the Central Machinery 12-in. sander, equipped with a 6 by 48-in. belt, that I bought at Harbor Freight. The belt is extremely difficult to align and the entire machine is crudely constructed. Also, the base isn’t designed to carry the weight of the sander. I should have known better.”
“My 2005 Deere 9560 combine is easy on fuel and has a nice cab. It’s also fun to drive. I wish the company still made this combine.
“I love my 1972 Deere 3020 diesel tractor.”
“I had good luck using Mechanic In-A-Bottle in my 1972 Cub Cadet garden tractor. It’s available at Walmart, and works in any 2 or 4-cycle engine, to clean and repair the fuel system without having to remove the carburetor or injectors. In the past I always had to remove the needle valve and clean it every spring, but not any more. Now I use this product on all my garden tools and also on my old Farmall H tractor. It lives up to the company claims.”
“My Cub Cadet 50 zero-turn riding mower is equipped with a steering wheel instead of steering levers, and the front wheels steer more accurately because they’re not caster wheels. As a result, this mower can handle hills and slopes without scalping the ground or spinning the rear drive wheels.
“Our Amana front-load clothes washer didn’t clean clothes well or rinse out the soap, even after it went through several cycles. I tried trading it for a used Whirlpool upright washer but the dealer refused. I wasted $1,000 on this machine.”
Paul’s impressed with his Keen boots (www.keenfootwear.com; ph 866 676-5336). “I suffered from a heel spur which caused me to limp along for about a year. Several months after I bought these boots the heel spur disappeared, and it hasn’t returned. I’m now on my sixth pair. These boots are rugged and durable, and most styles are waterproof and shock resistant. They’re definitely a best buy.”
“I use my 2016 Husqvarna zero-turn riding mower equipped with a 61-in. deck to mow about 2 1/2 acres of grass. It’s built heavy.
“I’ve found the quality of Sears Craftsman shop tools has declined. Their wrenches just don’t hold up under punishment like they did in the past.”
“My 2016 Milwaukee 18-volt lithium ion 1/2-in. impact wrench has more power than my air impact wrench. It can easily change all 4 tires on my pickup and do a brake job on one battery charge.
“My Milwaukee grease gun can go through 4 or 5 tubes of grease on one battery charge.
“Rust Bomb is the best penetrating oil I’ve ever used (www.conklin.com). It just eats up rust and makes PB Blaster look like it’s made of water.
“I think the quality of Harbor Freight tools has improved.”
On the “worst buy” side, he lists his Sears Craftsman ratchet wrenches and screwdrivers. “The ratchet wrenches have big-toothed gearing that doesn’t hold up to heavy use, and their screwdriver tips break even if you’re turning the screwdriver by hand.”
John’s impressed with “Who Gets Kissed” open pollinated sweet corn seed from High Mowing Organic Seeds in Wolcott, Vt. (www.highmowingseeds.com; ph 866 735-4454). “This bicolor sweet corn was developed at the University of Minnesota in collaboration with Martin Diffley, a longtime sweet corn producer. It was introduced in 2015.
“I’ve grown the corn for two years and saved the best ears for planting. It produces two large, well-filled ears per stalk. The flavor is similar to Ambrosia bicolor corn. This sweet corn does need early electric fence protection, because raccoons will attack it a couple of weeks before the ears are even ready for harvest.”
“An expensive bearing on my Cub Cadet riding mower went out twice in 8 years, even though I have only a 1/2-acre lawn, so I traded it on a Country Clipper Wrangler zero-turn riding mower equipped with joystick control. I love it. (www.countryclipper.com).”
“My Stihl BR600 gas-powered backpack leaf blower just runs and runs, with no problems. I’ve put hundreds of hours on it.
“The Kohler engine on my Cub Cadet LTX 1042 riding mower is junk. I think these engines put the Cub Cadet name to shame.”
“I like my ABI manure spreader (www.abiattachments.com; ph 877 533-8753). The company offers a variety of both ground and pto-driven spreaders designed for small farms. They range in size from 25 to 125 cu. ft. capacity. We use our spreader every day, and it has been super handy and reliable.”
“I use my Deere Gator every day and believe that every old man like me should have one. I use it to pick up the mail, to gather sticks, and to haul chainsaws, weed trimmers, and fencing items. It has almost 1,000 hrs. on it. I can’t keep my grandson off it, and I wish I could buy one for my wife, too. I do think the company could lower the price.”
A Grilla Grill rates as Dennis’s “best buy” (www.grillagrills.com; ph 616 392-7410). “I like to eat but don’t have time to grill. With this new pellet smoker grill you can push a button, throw your food on, and come back in 4 to 6 hrs. and it’ll be done to perfection. The Grilla Grill is sold only on the internet, but hands down it’s the best grill for the money.”
“My 2015 Chevrolet Silverado 4-WD pickup drives like a car. It has a smooth ride and is the best handling vehicle I’ve ever owned. It has more than 63,000 miles on it but still has the original tires and brakes.
“How did we ever live without cordless tools? I use a 1/2-in. impact wrench to remove tires from my pickups and skid loaders. The batteries on it have a built-in gauge that tells how much power is left. I like it so much that I’ll never buy an impact tool without one.
“I haven’t had many bad experiences lately, mainly because I insist on having a thorough, lengthy demonstration on any piece of equipment before I buy it, even if I have to rent it or lease it for a while. That way I can make sure the machine does what they claim. It’s much less expensive to pay rent on something and return it than to spend a bunch of money on a boat anchor.”
“It’s sold as the Best Mouse Trap Ever, but I haven’t caught any mice with my Casmac live mouse trap no matter what I tried. I spoke with the inventor who said only one other person had complained, but there have been several “worst buy’ reports in FARM SHOW. It was a total waste of money.”
John’s satisfied with his 2016 Polaris Ranger 4-WD utility vehicle equipped with a 900 cc engine. “It has excellent power, a smooth ride, and starts good in hot or cold weather. We use it every day on our farm. The only problem is that it shifts really hard into reverse the first time we use it every day. With 4-WD and a locking differential, this machine will go just about anywhere.”
On the minus side, he lists his 2014 Deere Gator equipped with a Briggs & Stratton engine. “The engine developed a head gasket problem soon after the warranty expired, and the dealer wouldn’t cover the $1,200 repair bill. He offered to take the machine on a trade-in but I declined. Instead I brought it home, waxed it up, and sold it. Then I bought the Polaris, which is a superior product in every way.”
“I like my W.A. Johnson combine feederhouse debris deflector (wajohnson.com; ph 502 266-7177). It’s a simple piece of 4 by 4-ft. vinyl that mounts above the feederhouse and keeps trash off the top of it. I used it last year for both corn and beans, and it kept any grain, corn ears and bean stems from building up on the feederhouse. It also kept the contour master area of the combine free of debris, as well as the reverser area.”
Jim’s a believer in K-Seal multi-purpose, one step coolant leak and head gasket repair (www.kseal.com; ph 888 254-0150). “Last spring I found my Allis Chalmers B tractor had 3 quarts of extra fluid in the engine oil due to coolant leaking in. It was brown and ugly looking. My local auto parts store told me about this product. At $40 a bottle it seemed pricey, but I knew it would be a real bargain if it worked. I used the product as directed, and since then the tractor’s oil level has stayed perfect. No more coolant leaks.”
“I bought my Whirlpool Mark I refrigerator-freezer new in 1976 and haven’t spent a penny on it since, not even for a service call. It always keeps an even temperature so food stays frozen. To this day it’s the only refrigerator I’ve ever owned.
“No problems with my 1981 Echo chainsaw after all these years. I heat my home with wood so I cut several cords per year. I’ve also used this saw at work to clear brush away from buildings.
“I’ve had problems right from the beginning with my 2002 Polaris Sportsman 700 Twin 4-wheeler. It wouldn’t start whenever the temperature went below 50 degrees, so I had to take it back to the dealer several times. Whenever they reset the carburetor, the crankcase would fill with gas. The dealer couldn’t fix it so I called the company, but they said that customers weren’t allowed to talk to their engineers.
“Finally someone told me the company has had problems with the head gaskets on this model. I removed the head and found a black rubber coating on the gasket, which was why it wasn’t sealing properly. I ordered a replacement gasket that turned out to be different than the original one, so I guess the company had a fix for the problem. After that I also had to replace the starter drive, and the electronic ignition with an aftermarket system. The machine works fine now.
“I understand that companies sometimes have problems with their products, but it’s how they handle those problems that matters. I was ignored after calling and writing them. Since all this happened I’ve bought 2 snowmobiles, an Arctic Cat and a Ski-Doo, and have had no problems with either one. So maybe Polaris did me a favor by causing me to change brands.”
“In the past I wrote to FARM SHOW that my Case IH 360 with a CVT transmission was the best tractor I had ever driven. However, last fall I was able to drive someone else’s Case IH MX 380 equipped with the same transmission, but tracks instead of wheels, I like it even better than the 360. Ground slippage was only 2 to 3 percent instead of 14 to 16 percent with the 360 model. I was able to cover many more acres per hour while using less fuel. The tracks also made for a much nicer ride.
“I had read good reports about Steuart’s Pain Formula that’s supposed to ease aches and pains. I have arthritis in both knees so I decided to try it. I used the product according to the directions, but it didn’t work for me. It came with a money back guarantee so I returned the Pain Formula container, but I never heard back from them.”
Bill like the arm chaps he bought from VanStarr Enterprises (www.armchaps.com; ph 651 492-4830). “The company says these form-fitting leather arm protectors are useful for protecting people with ‘thin skin’ or who bruise easily, which describes me. I’ve used them while doing mechanic work, tree work, and so forth and I never get bruises while wearing them. The $49.99 I paid for them was money well spent.
“Last fall I bought new front tires for my restored Wheel Horse garden tractor at Tractor Supply Company. However, after 3 mos. the tires kept slowly going flat. I checked and found the sidewalls were badly cracked and leaking air. The company told me they only warrant these tires for 30 days. I ended up putting tubes in them. I paid $38 apiece for the tires, and the tubes cost $22 each.
“Last summer I bought a Ryobi 14-in., 40-volt cordless chainsaw to cut up fallen trees and to do yard work. The saw has a 3/8-in., low kickback pitch chain that’s easy to adjust or change, and the battery will last up to an hour before it has to be recharged. Cutting wood for one hour at my age is plenty, and the recharging time - about an hour - gives me time to clean up the wood I’ve already cut.”
“My worst buy is Behr DeckOver coating. It’s supposed to bring new life to old wood and concrete surfaces, but the first time I applied it the product peeled off. The company replaced the material, but the second time I had even worse results. Now I’ll have to replace the entire deck.”
“In 2004 I bought a used 2002 Scag mower. I’ve used it every summer to cut 6 to 8 acres of grass and have replaced only the blade clutch. These mowers are pricey but work great.
“My 2006 Jinma tractor equipped with a 35 hp., 4-cyl. diesel engine is my worst buy. The first day I tried to use it one of the tie rods fell off. The tractor leaks oil everywhere and runs hot when bush hogging. Now I can’t find parts for it, as the dealer I bought it from went out of business.”
“Krail” penetrating oil is the best penetrating oil I’ve ever used. (www.kanolabs.com). It worked for me when several other brands didn’t.
“My Milwaukee 28-volt lithium ion, 1/2-in. impact wrench was very expensive, and after 1 1/2 years the battery wouldn’t even take a charge. A new battery would cost $165. No more 28-volt Milwaukee impact wrenches for me.”
“I like my LockNLube grease gun coupler (www.locknlube.com; ph 603 795-2298). It fits onto most standard grease guns and comes with a sliding sleeve that’s activated by a thumb lever. Four spring-steel jaws lock onto the grease zerk, creating a leak-proof seal. Activating the trigger releases the coupler from the zerk. I like that this coupler works on my metric fittings and zerks, which I had trouble getting grease into.”
Chris is impressed with his Kubota M9960 tractor equipped with an LA 1353 front-end loader. “This great little tractor is small enough to maneuver easily, yet strong enough to do many jobs around our ranch. The loader has a capacity of 2,000 lbs., and with the skid loader-style quick-tach plates I can use many different attachments with it. The only limitation is the tractor’s small fuel tank.”
“Our Honda 2000 generator always starts on the first pull, runs quiet, and will go for a long time on a tank of gas. We like it so much that we bought another one.
“We’ve found that Sears Craftsman 19.2-volt batteries last less than a year before they die and can’t be recharged. The company won’t replace them.”
“I own a 1998 Dodge Dakota 4-WD pickup equipped with a V-8 engine and automatic transmission. It has about 317,000 miles on it but still doesn’t use any oil. I tightened the valve covers once and replaced a U-joint twice. I change the engine oil and filter every 3,000 miles and the transmission oil and filter every 75,000 miles. This pickup has some rust but still runs fine. I’ve pulled many single and tandem axle 3-ton trailers with it.
“There’s not a better product made than Fluid Film when it comes to rust and corrosion protection (www.fluid-film.com; ph 888 387-3522). I’ve been using it successfully for 53 years.”
“The battery pack on our new Black & Decker cordless string trimmer lasted for only about 10 min. each time we used it, and after a year the trimmer itself quit working. I returned it to Menards but the manager offered no help at all. She told me she had the same model and that hers still worked good. I bought a Black & Decker cordless leaf blower at the same time and it doesn’t work, either.”
“It cuts faster and better than anything I’ve ever owned,” says Robert about his 2016 Scag Freedom zero-turn riding mower (www.scag.com). “This mower goes up hillsides where other mowers would just slip or stall, and it has heavy-duty blades so it can cut through taller grass, too. We have locust trees on our property so I put foam-filled tires on the mower to prevent flats.”
Tim’s impressed with his No-Spill 1 1/2-gal. gas can (www.nospill.com; ph 913 888-9200). “When I first saw it I thought this would be just another expensive, over engineered, leaky gas can. But I’m surprised at how well it works. I just invert the can and press a button to release the fuel. Letting go of the button cuts off the fuel supply without any dripping. It’s made in the U.S.”
“I bought my Dolmar 350 chainsaw because it’s lightweight and starts easy (www.dolmarpowerproducts.com; ph 888 673-7278). Once I get this saw running it never stalls.”
“I have a list of best buy products that I call my ‘wish I had bought two of them. It includes my 2001 Honda Foreman 4-wheeler, 2003 Deere 4310 tractor equipped with a hydrostatic transmission, 2005 Dodge Ram diesel pickup, 2006 Central Boiler outdoor furnace, and 2006 Jonsered 2150 chainsaw. All of these products get used hard but have required only routine maintenance.”
Len’s the satisfied owner of a Gravely Pro 260 zero-turn riding mower equipped with a Kawasaki FX 850 V-twin engine and a 60-in. deck. “I use this commercial mower on my 3-acre lawn, and to clear miles of ATV trails in our woods. It can handle almost anything because the frame is made of heavy gauge steel and the deck is made from steel plates with welded seams. There’s no flimsy stamped sheet metal anywhere on the machine.
“This mower has hydraulic steering with ‘soft touch’ controls for effortless maneuvering at speeds up to 10 mph. Yet even at high-speeds, it does an excellent job because of the high speed blade rotation. The only limitation is that it can get stuck in soft, wet ground, but that’s true with any zero-turn mower. Otherwise, it’s comfortable to operate and built like a tank. I don’t expect to ever wear it out.
“More than 26 years ago I bought a used 3-pt. mounted, 5-ft. Bush Hog mower. I pull it behind my IH 544 Hydro tractor and use it to clear land and make trails through the woods. As long as the deck on the mower can tip the vegetation over, it’ll chew it up. This mower has hit stones the size of my head and run over tires and dirt piles that lugged the tractor down to a stop. One time it even ran over a gravel shovel that my son had left lying in the weeds. It chewed up the handle and cut the blade into three pieces. Yet with all that abuse it has had only one broken blade. This is a tough, awesome machine.”
“I don’t know how I ever got along without my Rockwell Sonicrafter multi-purpose oscillating tool (www.rockwelltools.com; ph 866 955-4175). The company offers numerous accessories for it including different saws, blades, rasps, sanders and scrapers.
“We’ve relied on this tool for many cutting and scraping projects, both in the shop and while we were remodeling our house. The hyperlock feature on it makes changing blades an easy job.”
“It took 35 years to save enough money to buy my Morton 54 by 60-ft. shop building, but it was worth it. It’s built strong and with great quality, including the insulation and doors.
“Two years ago I purchased new two-way radios from Cardinal Wireless. Big mistake. The company claimed these cheap Chinese-made radios had twice as much power as my old American-made radios, but actually they were virtually worthless.”
“Every time we drove over a high spot with our Estate Rough Cut pull-type mower, the deck belt would pop off. Otherwise, this mower does a good job.”
“The gas-powered Massey Ferguson 165 tractor I bought used 30 years ago is my best buy. It spent its early days pulling a pto-driven small square baler for a local custom haying operation. I was on the road a lot with it so I replaced the rear tires with Firestone Field and Road tires. I also had to replace an oil seal on the pto shaft. Otherwise the tractor has required only routine maintenance. Now I use it mostly in the winter for blowing snow, and it always starts right up.”
On the negative side, “I had less than seven hours on my Coleman generator when something on it flew apart causing it to stop working. The warranty had expired just 7 days before, so I thought maybe the company would help out. No luck. If the company rep I talked to hadn’t been so nasty, I would have accepted that the generator was out of warranty and just junked it. But now I’ll never buy a Coleman product again or recommend them to anyone else.”
He’s happy with his Milwaukee 18-volt high-torque, 3/4-in. drive impact wrench which produces up to 750 lbs./ft. of torque. “This tool has guts. It beats air impact wrenches for its light weight, great torque, portability, and ease of use. I use it every day to change the knives on a big wood chipper, and have to loosen and retorque 27 3-in. long bolts to do the job. Yet I can loosen and retorque the bolts to 465 lbs./ft., without using up more than half the battery’s capacity. I think every farmer should own this tool.”
“My BFGoodrich All-Terrain T/A Ko tires last a long time and have a good tread design for both winter and summer. No highway noise, either.”
“The engines on my IH 303 and 615 combines seem to run forever, and are simple enough in design that I can work on them by myself. I bought both combines used years ago and they’re still going strong.
“In my experience, Deere 3020 and 4020 series tractors equipped with the powershift transmission will run forever without any problems.
“Several years ago I bought a new Deere 275 9-ft. disc mower which turned out to be a piece of junk. It was welded together at the factory with the belt pulleys out of line, and as a result I had to replace several sets of $300 belts. I had a welding shop cut 1/2 in. out of the frame, which cured most of the problem. Also, the mower’s swivel shaft broke off, and I’ve had to replace several gears and bearings. I’ve spent more money on repairs than what I paid for the machine.”
Gary’s the satisfied owner of a Sears Craftsman Nextec 12-volt lithium ion right angle impact driver. “The lithium battery lasts a long time and works great for drilling holes, driving screws and any job that can be done with a tool equipped with a 1/4-in. hex shank. This is my ‘go to’ tool. With a couple of spare batteries that charge quickly, it can go all day long with no down time.”
“It’s the most reliable and smoothest running mower I’ve ever owned,” says Paul about his 2010 Grasshopper 618 zero-turn riding mower equipped with a 52-in deck. “Maintenance has been limited to normal wear and tear on the belts and bearings and so forth.”
Stan owns a 2009 Deere Gator 620i utility vehicle. “My wife and I enjoy driving this machine almost every day. It’s dependable and easy to get on and off. A real workhorse. We’ve used the machine to pick up tons of rocks and to spot-spray crops using a 25-gal. sprayer mounted on back. It always starts and works great for checking on crops and cutting firewood in winter.”
“My Case IH Magnum 7110 is a simple tractor with lots of power, and it’s easy to service. However, parts from the company are expensive. I can buy filters for half the price at NAPA Auto Parts. For example, an oil filter that costs $50 at Case IH sells for $25 at NAPA.
“My New Holland 450 Utility round baler is designed to make 4 by 5-ft. bales weighing up to 1,000 lbs. However, the computer on it never worked right. This is a small baler so I have to baby it. My advice is to buy a bigger baler - you’ll be money ahead.”
Roy’s the satisfied owner of a 2017 Deere X370 lawn tractor equipped with a Kawasaki 18 1/2 hp. engine. “I love this machine. It has power steering and a hydraulic lift deck, and to switch to mulching the grass I just pull a lever. Before I bought this model I owned four X300’s that I used in my mowing and landscaping business for years, and they were great, too. I put up to 1,100 hrs. on them without a bit of trouble. These are great mowers.
“The belts kept coming off both of my Cub Cadet LT 42 riding mowers and I had a lot of trouble with blades bending. The first mower had to be worked on 6 times with less than 23 hrs. on it. The engine blew up on the second mower with only 125 hrs. on it.”
“I’ve used my 2006 Yamaha Rhino 450 4-WD utility vehicle for fencing work, wood cutting, hunting, planting food plots, and so forth. So far it has required only routine maintenance. When my daughter was getting ready for her driver’s test she used the Rhino to practice parallel parking. This machine would be tough to replace, but it may last as long as I do.”
He says his 2016 Mahindra 4550 loader tractor “has worked as good as I expected. It had a few minor problems but the dealer promptly took care of them.”
“I’m well pleased with my Deere 1025R sub compact utility tractor equipped with a mower and front-end loader. It’s a handy, versatile tractor. I especially like the drive-over auto attach mower deck, and the loader sure saves on our wheelbarrow.
“My 2010 Deere 7330 tractor has a lot of power in a compact size and is a joy to operate.”
“I’m happy with the Predator 8750 generator I bought at Harbor Freight. This 13 hp. generator has 8,750 maximum starting and 7,000 running watts. I use it to operate a healthy size air compressor and keep a 100-watt drop light plugged into it to ‘preload’ the generator. I wait for it to get up to speed before I flip on the compressor switch.
“I liked this generator so much that I bought another one 2 years later. Both start on the first or second pull, even in temperatures down to 30 degrees, so there’s no need for electric start.
“I also like 2 Pittsburgh products that I bought at Harbor Freight - a 2-piece vehicle dolly with 1,500 lbs. of capacity, and a 1 1/2-ton aluminum racing floor jack equipped with a rapid pump.”
“I bought my 2015 New Holland L220 skid loader new in 2016 and rented it to a friend to push snow, but when it came back it had a bent boom. Fortunately, my dealer was able to repair it under warranty. Now this machine has 720 hrs. on it and has required only routine maintenance.”