Allis-Chalmers: what farmers say
165 reports in FARM SHOW · 138 Best Buys28 Worst Buys
Allis-Chalmers (general)
53 Best Buys17 Worst BuysRobert Himmerich, Pena Blanca, N.M.: Robert's “best buy” is a tillage tool he made out of a 1950's Case S-128 disk. 1ys “We replaced the rear disk gangs with a pair of 2 1/2-in. sq. toolbars which we fitted with 11 Allis-Chalmers field cultivator spring tines with twisted chisel points. They throw soil back toward the center of the disk. The center ridge is broken up by a straight chisel point. For less than $400 we now have an excellent piece of conservation tillage equipment. “My Vac-A-Way seed and grain cleaner/ grader is my worst buy. It doesn’t develop enough vacuum power to remove light material from the grain. To get acceptably clean seed we have to run grain through it at least three times. We had to reinforce the bagger-elevator in order to keep the sheet metal from collapsing onto the elevator belts and jamming them. For a little more money we could have bought a much better rig.”
Ray MeNiel, Pansey, Ala.: A new type of rasp bar manufactured by Allis-Chalmers for Gleaner combines is Ray’s “best buy”. “These rasp bars are made with larger ribs and wider spacings between the ribs. They gave my F2 Gleaner new life, boosting capacity and making it a pleasure to combine in weeds. I highly recommend them for anyone who grows soybeans.”
David Meisenzahl, Honeoye Falls, N.Y: “Two years ago we bought an Allis Chalmers N-5 Gleaner combine, We gotitin July for wheat harvest and it worked great, Then we went into corn and only had three loads loaded before the cleaning fan fell apart. We waited two weeks for a replacement. Then a shaft and the double pulley broke and we waited another week for parts. There were also a few small things that we had to fix on a day-today basis, although when it worked it did a good job. That winter the company said they'd take the machine in and go through it. They took it in the Ist of June and said they'd have it back by wheat harvest. On the 10th of July, when we were ready to harvest, they were still waiting for a cleaning fan, which wasn’t even broken when it went to them. We got the N-5 back on the 18th of July when the wheat was starting to sprout. I lost about 400 acres of custom work and that's my major source of income. “When we got into corn harvest the machine ran well and did a good job but the shaft and pulley broke again and then the fan went out again. In November, we traded it off. “Our International Axial-Flow 1460 is our best buy. The combine is easy to handle, with everything at a fingers touch. My wife even drives it and she wasn't raised on a farm. There are three IH dealers within 30 miles and they have good service and parts.”
Charles Heinz, Dawson, Iowa: ‘If you own a Deere Max-Emerge planter, you'll find that you have to replace the bearings in the press wheels. They're held together with allen head screws and are nearly impossible to remove with a wrench. A mechanic loosened them for me the first time with an impact wrench so I went out and bought myself one. It's now my best buy for loosening screws and nuts. “We also made a good buy in 1973 when we bought our Mercury Montego MX. It has over 100,000 miles on it. I've never had to replace any belts, or the exhaust system, and it still has the original brakes. We just buy new tires once in a while and keep driving.” David E, Lewton, Weaubleau, Mo.: _ “Our best buy is our 1975 4430 Deere tractor, It had the best cab and performance when it was new and it's still hard to beat,” says David. He names his 1981 Allis Chalmers Gleaner N-6 with a 20-ft. flex platform as ‘worst buy". “It has all the options, cost over $125,000 and is definitely for the big farmer. He is the only one that can afford all the down time, production losses, crop losses and income loss that the N-Series Gleaners cause. This combine occasionally shows awesome performance — on one very low humidity day we cut 40 to 50 bu. wheat at 6 to 7 mph. — but most of our time is spent fixing up after poor workmanship and engineering.”
Olen Swartz, Augres, Mich.: Olen's had trouble with his Allis Chalmers 5040 diesel tractor. “It won't turn short. The hydraulics are poor. The pump is too sIowand the split transmission is hard to shift. The pto will not go into gear without a lot of grinding.” On the plus side, his “best buy” is his 2400 Bushhog loader. ‘‘The loader is a good, heavy-duty one that performs well. I like the quick-tach Best And Wo feature that lets me take it offin only a few minutes.”
William C. Waller, Mooresville, N.C: “It is one of the best tillage tools I've ever used. It’s sure nice not to have to put in shear bolts when you hit an underground object,” says William, happy with his “best buy" International No. 14 V-chisel with automatic reset shanks. On the “worst buy" side, he's had bad luck with insecticide hoppers for his Allis Chalmers no-till planter. “They're made of fiberglass that breaks out around the bolt holes. I've had to replace four of them after 200 acres of use.”
Philip Sutton, Wolcott, N.Y.: His “worst buy” is a 71-ft. Cardinal 10-in. auger. ‘Il bought the auger and assembled it myself. In two places where %-in. bolts were supposed to go, couldn't get a -in. bolt through. Three pieces of metal were misaligned. I had to break the welds, realign and weld them myself. In approximately 35 running hours, both lower bearings wore out. I looked all over for bearings and had a hard time finding them because the bearing holder was metric. had to buy all new bearing holders and bearings. Every time I use the auger I have to replace about three shear pins, The auger is very poorly engineered and assembled. I've discouraged all my neighbors from buying one.” On the plus side, Philip's happy with his Allis Chalmers 7010 and 7060 tractors, and his Gleaner L2 combine. “Both tractors are wellbuilt with a rugged 3-pt. hitch and lots of hydraulic capacity, There's always plenty of power when you need it. The combine has plenty of power too, and does an excellent job on grains and corn. All three are good on fuel and easy to work on.”
Jack Bycraft, Denfield, Ont.: His leased Allis Chalmers 6060 tractor is both his best and worst buy. “It's smooth-handling and agile with 60 hp. We use it for planting and row crop cultivating (8 rows.) It has good field speed and lots of power to pull and windrow with 4-row edible bean equipment. However, the tractor’s road speed is inadequate. The pto coupler requires engine shutdown, which is a nuisance. King pins and steering knuckles are simply not strong enough. We can’t maintain front wheel alignment. We thought the problem was an overload situation when the loader was mounted but when the loader was removed, the realigned tractor went seriously out of whack again after two days of drawing corn wagons to our dryer. I now check and reset the alignment after every encounter with bumps before I venture onto paved roads. The AC dealer is of no assistance in repairing or replacing the bent steering parts. It is proving to be a tremendous nuisance that the dealer chooses to ignore.”
Andrew Kember, Sarnia, Ont.: “Our nightmare began four years ago when we bought an Allis Chalmers N-6 combine,” says Andrew. ‘‘Whata lemon! That machine was built to break down. Whey they came to sell us onit, it was the new wonder rotary combine with capacity, simplicity, ease of handling, and so on. That was absolutely false advertising. In three ‘“‘What a lemon! That machine was built to break down.” years we only had two days without breakdowns. I could have had my crops off faster with my old Gleaner M. The front conveyor wrapped bean stubble on the back drive, the front conveyor adjust always broke and would knock the chain off and plug up. The stone trap is located a ¥% day journey up into the middle of the combine and needs special wrenches to adjust and get foreign material out. The steering puts you in the ditch at over 12 mph. The engine uses 10 to 12 gal. per hour. The throttle lever should have a 3-in. hydraulic ram on it for speed adjustments. The unloading auger fell off six times. Cheap and light material was used for construction throughout this machine, Even the dealership gave up on this junker because not even the best mechanics could keep it running. “Allis Chalmers owes every owner Best And Wo of the first N-series combines a big public apology for their mistake in marketing this machine too early plus compensation for down time and a trade-in allowance. We traded last summer for a Gleaner L-2 and it did a super job in comparison to the N-6." One of Andrew's “best buys” was his Kinze 800 grain buggy. “It's super well-built and not skimpy on steel like so many products today. It's made to last 20 years. Works well and its big size sure speeds up harvest as we can get 30% more out of the combine. We only need one truck and this wagon to keep up with a 1,200 bu. per hour combine. “Another good buy is our Deere 7000 Max Emerge planter, We've planted 3,500 acres in two years with excellent service. It did what it was advertised to do with excellent seed placement and depth control. Seed was covered well in adverse conditions and in heavy clay soils. One complaint is that the markers don't fold quickly out on hilly ground and when they are folded up, they are too far out from the end of the planter and dangerous along fences.”
Ervin H. Cook, Huntersville, N.C.: ‘With hydrostatic drive and monitors, this combine is a pleasure to drive. The cab has plenty of room, good vision, an air-conditioner and heater. Does a fine job of shelling and cleaning grain. The 4-cyl. diesel turbo-charged engine has plenty of power. A tough combine that gives little trouble when properly set,” reports Ervin, about his Gleaner F2 “corn plus” Allis Chalmers combine.
James O'Connor, Blooming Prairie, Minn: ‘‘My father bought an Allis Chalmers N-6 combine in 1980," says James. “It was a total disaster. Everything that could go wrong, did. Allis Chalmers convinced him to trade for an updated N-7 Gleaner but even with that machine you were lucky if you made it to the field without breaking down. He has since traded that machine, too, and happy with his new 7720 Deere. “My own worst buy was some miscellaneous foreign tools I bought with price in mind. I got my money's worth, used a 14-in, pipe wrench for the first time and broke the jaw right off. wish the U.S. would quit importing such garbage.” His “best buy” is his 1981 Mercury Capri. “It gives me an excellent ride and gets 35 to 40 mpg. under loaded conditions. Not at all like the foreign imports that are ruining the economy.”
David Peterson, Dumont, Iowa: “In 160,000 miles we've replaced nothing but spark plugs and a water pump for the engine. The seat cushion has one small tear and the truck runs and drives as good as it did at 50,000 miles. Its only drawback is that it gets just 10 mpg.,"’ says David, happy with his 1973 Chevrolet % ton pickup with automatic transmission and a small V-8, His “worst buy" is an Allis Chalmers Gleaner K combine that he bought used in 1973. "I've replaced the bearings between the variable speed 13 times. The first owner replaced it at least once. I've had no help from the company. I'm satisfied with the job the combine does but now that it’s time to buy a new combine I can't see any reason to buy another machine that the company won't back.”
John Kiss, St. Paul, Alberta: ‘'! bought it used in 1947 and have been using it ever since,” says John, happy all these years with his 1942 Allis Chalmers WD tractor. “It still runs like a charm. There has never been a “T bought it used in 1947 and have used it ever since.” major breakdown in all the time I've owned it. It was rated at 37 and all 37 horses pull!"
Glenn T. Maschmidt, Florissant, Mo: ‘ have owned several Allis Chalmers tractors. In April of 1980, I leased my latest — a 6080 — and there are things I like and dislike about it. It doesn’t turn short enough and there are so many gears it should have a power shift-type transmission or a high-low clutch like the XT-190 had. The triple speed gear shift doesn't need a neutral between the gears but should be in low-medium or high with no gap in between, I don't like the pto set-up and the gas throttle should be on the right side of the seat — not on the dash. “On the positive side, it’s very economical, doesn’t have engine or hydraulic leaks, has lots of power, good visibility, high ground clearance and Allis Chalmers has a good leasing program.”
Arthur L. Zoss, Low Poin, IL: “This machine is one of our best buys. We grind up to 20 tons per week with no trouble. We have had two Arts-Way grinders before this one and dealer service has always been excellent’, says Arthur about his model 500 Arts-Way grinder bought in 1982. On the negative side, ‘We bought a new Allis Chalmers 8050 power shift tractor in 1982. Workmanship on the tractor is very poor. We have trouble with the power shift transmission as well as oil and fuel leaks. We have had it back to the dealer several times. It broke down when we needed it most but our dealer has been very good, giving us another new tractor to use while ours is in the shop.”
Bill Short, Hamilton, Mo.: “Our worst buy has been our new Allis Chalmers disc as it seems to require an eternal supply of bearings all over the disc. Our all-time best buy has been our Farmall “H” which is easily serviced. We added a 3-pt. hitch and two-way hydraulic controls. If International would continue to build tractors as they built them then, they wouldn't be in their financial troubles now."
Herbert Eichman, Rush Colo.: ‘My worst buy is a 7020 Allis Chalmers tractor with power shift transmission. It will hardly pull itself in reverse and it is hard to shift between ranges. It will not start in cold weather even when it is plugged in, unless I put it inside and cover the engine with a blanket. It uses much more fuel than my old XT 190, I have no complaint with the dealer. He has tried everything to fix it, even putting different pistons in it.”
Don Losure, Chester, lowa: ‘“The absolute worst product I've ever purchased is the ‘Big 6’ farrowing house built by Economy Housing of Wahoo, Neb.,"’ says Don. “In hot weather, sows get their heads stuck in the creeps and the building has to be disassembled to get them out. Little pigs get out and can't get back in. Sows crush too many pigs, and the hardware doesn't stand up to abuse. called the company twice about problems but they already had the money and had the problems. am presently using the buildings as nurseries for weaned pigs and they work alright but are not recommendable. These buildings combine most of the labor of a pasture system with most of the expense of confinement.” On the positive side, Don likes his Allis Chalmers D-15 tractor. ‘We added a hydraulic pump and three valves to make a great loader tractor out of it. Always starts, doesn’t use much gas and hardly ever needs to be worked on.”
Stuart Beckman, Menlo, Kan: Stuart's pleased with his 8-row, 30-in. spaced International 800 Early Riser planter. ‘‘We bought this planter in the spring of 1982 and planted over 1,500 acres of corn, soybeans, grain sorghum, and sunflowers. Plants with better accuracy and is more stable than the TH 500 planter we traded in. especially like the large, centrally located seed hopper, ease of depth adjustment and consistent depth control. It provides good seed-to-soil contact. We had excellent stands in conditions from too wet to too dry, Possibly the best thing about this or any of International's air planters is the ease of changing the planter over for different crops. I went from planting soybeans to sunflowers in less than 10 min. Anyone buying a planter ought to look these new Internationals over twice.” Also on Stuart's “best buy” list is his International 2 plus 2 3588 tractor bought in 1981. "Good power and traction and [ like not having to fight duals all the time, A good row crop and dry land tractor. “Our John Deere 4440 is the nicest tractor on the farm but it's also the biggest fuel hog. Good comfort, visibility and power. “My most memorable ‘worst buys’ were two 1976 LM 630 Allis Chalmers cornheads. With about one hour of service each morning they worked fairly well the first year, After that, neither one would run for 12 hours at a time due to constant roller bearing and roller drive problems. I traded them for John Deere 830 cornheads, which work excellent on our 1980 Allis Chalmers L2's.”
Walter Kropf, Woodstock, Ont: “It didn't roll the grain as well or as fast as it was supposed to,”’ he reports about his “worst buy” Farmatic 6 compartment roller mill. ‘‘They changed the rolls to try and improve the rolling. It helped but it’s still not the way it could be. Also, the cows didn't eat the feed as well as the company claimed they would." Walter's pleased with his 7010 Allis Chalmers tractor. ‘‘A real smooth running engine and nice quiet cab. We like it’s maneuverability and handling.”
Jimmy Monin, Cox's Creek, Ky: “One of our ‘best buys’ ever was our 170 Allis-Chalmers tractor, bought brand new back in 1971. The tractor now has around 2,300 hours on it and, aside from oil filters and a battery, we have spent less than $75 on it. We also have a 2640 John Deere with about 200 hours on it and it's doing real well. Our ‘most dependable ever’ tractor is our old 1957 520 Deere which we use almost all year long for light work such as hauling hay to the cattle in winter. It is almost maintenance-free. We also have a 1954 Farmall Super-M which is alsoa good tractor but is hard on the gas. We don't use it much. “On the negative side, our ‘worst buy’ has to be an International 140 tractor that we bought new in 1975. Even when it was brand new, the head was leaking antifreeze, and the hydraulic system and rear end were “Even when it was brand new, the head was leaking antifreeze.” leaking. The governor wasn’t adjusted right and neither were the brakes."
Lester Bening, Arlington, Minn: “It has so much traction I'm able to plow through water,” says Lester, pleased with his International 2 + 2 tractor. “It has plenty of power to pull my other ‘best buy’, a 33% ft. Allis Chalmers field cultivator. The tractor has good visibility and I've had very little trouble with it overall, It uses less than 1 gal. of fuel per acre. The tractor is rated at 150 hp. but is putting out 162. Last fall when it was wet I was able to get my plowing done, thanks to this tractor. Dealer service is also great.”
Bill Yerkes, Milanville, Penn: ‘My ‘worst buy’ experience was the purchase of a new Allis 175 tractor,” reports Bill. “We felt we needed a larger tractor to replace our ‘old faithful’ Allis Chalmers D-17, We shopped around and bought the new AC 175, It turned out to be half the tractor the D-17 was. It was clumsy, awkward, rough riding and fuel hungry. After eight months, we traded the 175 off fora Kubota 7500 4-wheel drive. This tractor is really a dream to be around. It handles well, rides well and is economical with fuel. It seems strange that all of these tractors were purchased from the same dealer who, by the way, gives great service, “Another good buy is our Partner S-50 chainsaw, which has only required a new chain in two seasons and cuts beautifully. When handling wood, we use another ‘best buy’ product — our Farmi 3-pt. winch. This is one of the handiest tools that we have. We use it both in the woods and out, handling everything from logs to stuck vehicles to down cattle in the barn. It seems a shame that all my best products are foreign made."
Jim Pfleidner, Avilla, Ind: Jim's disappointed with his Allis Chalmers XT190 tractor. ‘‘We have problems all the time. We went through two rear ends, it has no traction, and it smokes all the time.”
S. Ridgely Morison, Delmar, Delaware: “When was looking for a grader blade for my 40 horsepower Allis Chalmers, it seemed that the grader blades for that size tractor were all flimsy and cheaply made. The more ruggedly built blades were too heavy, requiring a 75 to 80 horsepower tractor. My dealer told me about the York 407 blade and I have not been sorry. It has the same design as the larger blades but is light enough for the smaller tractor to handle, Takes every job I give it,” On the “worst buy" side, he has a complaint about oil spouts. ‘I would good, durable spout. I don’t understand why it’s impossible to buy a spout opener for a quart can of oil that will not leak or allow the can to fall off. I've purchased spouts that leaked as much oil onto the engine as was poured inside. One spout let the can fall off, making a lovely mess.”’
Lester Wissmann, Lesburg, Mo: “My John Deere 36 square baler is my ‘best buy’. I've never had a serious breakdown, and it continues to operate without any tying problems. use regular or plastic twine, both of which work fine. Good dealer service. “My ‘worst buy’ was an Allis Chalmers 942 square baler. It wouldn't take the hay. I had to bale with a single windrow so the feeder wouldn't shear pins. Field representatives checked it but didn’t think there was too much wrong. After baling 4,500 bales, I took a loss and traded it off.”
Harold Cramer, Hidalgo, Ill: “My best buy ever is my Allis Chalmers D-19, propane-powered 1962 model tractor, We've never even had the head off and it has over 4,000 hours. Also, my propane-powered Allis Chalmers 190XT, which has about the same number of hours, has never been in the shop for overhaul.” Harold's also pleased with a pair of Subaru autos. “I bought the first one in 1971 and liked it so well I bought another one. The first has 110,000 miles on it with no trouble and the other 70,000 miles. They get 40 miles to the gallon and I think they'll run another 100,000 miles.”
Robert Butt, Flaxcombe, Sask: Robert nominates two “worst buys"’. “Our N-5 Allis Chalmers combine never should have left the factory. It was very poorly assembled. The concave has never shimmed properly and the unloading auger universal was not put together right. Very poor feeding in wheat because of the concave. An electric over hydraulic failure caused excessive plugging. There were other problems but your paper doesn't have enough room to Robert is also disappointed with his 1974 850 Versatile tractor. “It had “All the problems took place when we needed the tractor.” engine problems in the first 200 hours of service. Three sleeves and pistons had to be replaced as wellasa jammed injector. It had a universal that wouldn't take grease and was very difficult to work on. All the problems took place when we needed the tractor. “By far my ‘best buy’ was my 1979 4440 John Deere tractor which we have put roughly 1,600 hours on without an hour of down time. It’s easy on fuel, has the best of rides and has excellent power for its size. My dad thinks there's only one color of tractor — green and yellow. “Our second ‘best buy’ is an 8440 Deere that has all the features of the 4440, Easy to work on and a great ride.”
E.K. Habersetzer, Raymond, Wash: He's happy with his Bauer F111 RD manure pump. “We'd used an older model Bauer pump since the mid 60's and were well satisfied with it. Then, we bought the new F111 series and wow! It puts out more with the tractor at half throttle than the old one did wide open.” On the minus side, he's disappointed with his new Allis Chalmers 185 tractor. “We've been with AC for years, We have a WD 45 that is a great old workhorse and a D17 that can handle a 16-in. three bottom plow ata trot, and now Allis Chalmers puts out a 75 horsepower 185 that won't do any more than the D17 at 55 horsepower.”
William E. Hinricks, Meridian, Idaho: William is disappointed with his electronic mouse control. “Its a Sonitron Cand is supposed to createa high pitch noise to discourage mice, Rather than chase them away, they nest right by it," he says. He's also displeased with “the new improved milker inflations from DeLaval, They cut everytime a cow kicks them on the floor. They were much better before they ‘improved’ thern.”’ On the plus side, Willam's happy with his Lincoln AC/DC welder, ‘We bought the welder because it has a 6,000 watt power plant as well as a welder. We use it to run the electric knife sharpener on our Fox forage harvester when we are away from any other power source. We're also happy with our Allis Chalmers 2550 15-ft, disk that has given us no trouble in 1% years. Our Kverneland 4-bottom, 2-way plow is also a good buy and has gone through rocks with no damage in 200 acres.”
Mark R. Dour, Slippery Rock, Penn: He's well pleased with his New Holland 791 manure spreader. travel over some fairly rough ground to get to the field and this spreader takes the punishment with ease. I've had only one problem, a flat ‘tire, which the dealer took care of the same day. Very pleased with this product.” Mark's second ‘‘best buy" is his International 510 grain drill. ‘We've had absolutely no problems with it. The only thing that we would change would be to have double disc openers instead of single openers. We are especially pleased with the uniformity of the depth.” On the negative side, Mark's disappointed with his Allis Chalmers 185 tractor. ‘‘The motor has excellent response and it does have ample horsepower for its size but the fuel economy and gear selection are terrible.”
James H. Anderson, Sullivan, IL: James has had good luck with his 5020 Allis Chalmers tractor with a 60-in. belly mower and 50-in, Sidewinder rotary mower. “I like the ease of putting the mower on the tractor and removing it. The mower works great and the tractor has the proper range of gears for all mowing conditions. The tractor is small for the power range. Handy to run augers and other pto equipment.”
Adrian B. Harris, New Sharon, Maine: He had trouble with his 1980 Long 610 tractor. “It was poorly constructed and broke down most of the time. In less than a year it was being repaired more than I was using it. 1 lost the motor, clutch, pto and had trouble with the hydraulics. sold it with very few hours on it.” He likes his 1981 Allis Chalmers 6060 tractor. “Gives me no trouble. A good, all-around tractor and loader. Tremendous hydraulics.”
Jerry W. McElahaney, Bratt, Fla: “Our TR 70 combine does a fine job in all crops. Plenty of power with that Cat engine. Have had little down time after nearly 700 hours. Dealer service is exceptional. Am also pleased with Volkswagen's diesel pickup, Excellent fuel economy, handling and comfort.” On the minus side, Jerry's upset with his Allis Chalmers 7060 tractor. “We have always used AC tractors on our farm but this 7060 is making us look at other colors. It has been nothing but trouble and is in the shop more than the field. Dealer service has been good but quality of equipment is not up to par.”
Murray L. Hiltz, Lagrange, Ohio: “This tractor arrived with two different makes of rear tires one Goodyear and one Bridgestone. The dealer never corrected this. The tractor has poor selection of speeds and poor spacing of rear tires that doesn't allow hooking up some implements without widening the wheels,” says Murray about his Allis Chalmers 30 hp diesel farm tractor. “1 had a good experience with a 1980 Ford F-100 truck. We used it for nearly a year and sold it for $300 more than we paid for it.”
Junior Mathias, Birmingham, Iowa: Junior's pleased with his new “Their metal detector is unbelievably effective.” Longwood Dualfuel furnace installed last December. ‘‘With the old furnace, we used 200 gal. of oil in November, 1980. From December to February, using the new furnace, we used just 50 gal. of oil. It doesn't use large amounts of wood and does maintain even room temperatures. No problems so far. “Another good buy was our Allis Chalmers 1300 series 23-ft., 6-in, wing fold cultivator. We have had no problems at all with it.” On the “worst buy" side, Junior says he’s had trouble with the input shaft and bearings on his F Gleaner combine. “The original lasted five years and the replacement lasted five hours. After three shafts and bearing sets, we finally harvested with $1,500 spent and no answer for our problems. Last fall, after a year, the company did admit the shafts they were selling were supposed to have been recalled, Our dealer finally obtained all new parts plus a new housing at company expense.” Junior's also pleased with his Deere 7100 folding 8-row planter, but has a suggestion for the manufacturer: “The adjusting gate settings for insecticide and herbicide boxes are different. We failed to catch the differences until we started planting. Then, we discovered one setting is for insecticide and the other for herbicides. Deere should put out more information to their dealers specifying which is which."
Keith Frakes, Carthage, IIL: “One of my ‘best buys’ is our 12-row 30-in. air planter from Allis Chalmers. We had a few minor problems with it at the start, but doesn't everyone with a new piece of machinery? read it from front to back when it arrives — even if I have to stay up half the night to do it,” says Keith.
Sonny Miller, Headrick, Okla: He's had trouble with his 1980 Oldsmobile Cutless Calais. ‘When we first got the car we had trouble with the air conditioner. Had it in the shop three times for a vacuum leak. The car is advertised to get 27 mpg but is only getting 19 mpg. It's been in the shop two other times trying to tune it for better mileage. It has the new C4 computer emissions control and, as we write now, it’s in the shop with the computer system out. By far, it's the most trouble I've ever had with an automobile.” Sonny's had good luck, though, with his Allis Chalmers 7080 tractor with Goodrich radial tires. ‘We're well pleased with the power of this tractor. It's rated at 181 hp and tested at 205 hp when I put it on the dyno. So far, in 500 hrs. of operation, no service calls or repairs or adjustments. like the radial tires. Well worth the difference in price.”
Jim Burtman, Alamo, N. Dak: Jim nominates three ‘‘best buys’? — his Honda GL 1100 Interstate motorcycle, his Kongskilde air grain mover, and his 7000 Allis Chalmers tractor. “I have over 100 miles to go round trip for parts and, with the cycle geta “Somebody has to be on standby every time it’s in use.” ting 45 to 50 mpg at 70 mph, you'd be surprised at how much it saves. I can’t think of anything I dislike about this bike. “The grain mover, made in Denmark, does what it claims to do, and quietly. Our dealer has made sure we're satisfied in every way. “The AC tractor is tops, except for shifting. You can't get it out of gear if it's stopped, and the company can't cure it.” On the minus side, Jim. says he’s disappointed with his Leon 43-ft. chisel plow. “Something is always wrong with it. from losing shanks to breaking the frame. Somebody has to be on standby every time it’s in use. I can't see why the company can't put more pride and effort into their product,”’
Charles Gunderson, Glenville, Minn: His ‘‘worst buy" nomination is his ‘‘Allis Chalmers Gleaner CII combine bought in 1979. I bought it used and have had to almost go completely through it front to back, top to bottom but mostly it's that the bearings are going out again and again. The dealer gives good service and that's the only reason it's still on the place. Repairs are finally getting fewer on it.” Charles adds that his Husqvarna model 65 chainsaw “has worked out well. Service was excellent in fixing a gasket leak and I have found no other saw to be as good for power, speed, handling and servicing.”
Roger Minnis, Riceville, lowa: Roger's upset with his 904 Allis Chalmers’ Haybine. ‘No way could you just go to the field and cut hay. Always something to adjust or replace. It seemed the reel was made to throw the hay ahead of the sickle. The worst machine ever had." On the plus side, Roger notes that, “Our 4-wheel drive 6806 Deutz tractor equipped with a 42 Westendorf loader makes a perfect outfit for our feedlot. Dealer has been outstanding. Also, our CJ-20 Jeep pickup is the most trouble-free truck we've ever had.” Guy &
Paul Rauh, New Weston, Ohio: “We can't get it to cut level.” says Paul about his 2300 Allis Chalmers 16-ft. disk harrow. ‘‘The dealer came out to adjust it, but couldn't do any good. He sent for a field serviceman who spent a full day in the field and was unable to help. We ordered a new frame but that did no good.” Paul's happy, though, with his New Holland L775 skid steer loader. “It performs great. It's a heavier machine and won't tip as easy as competitive models. No trouble learning to operate it. It's simple to drive.”
Fred Phillips, Lucknow, Ontario: “My Gleaner M combine is a ‘best buy’. It's given me no trouble and is “The corn head isn’t worth the powder to blow it up. Plugs up and is hard to repair.” easy to work on, but the corn head isn't worth the powder to blow it up. Plugs up easy. Hard to repair. Chains always coming off."’ Fred says he’s also had trouble with his Allis Chalmers 770 Air Champ corn planter. “The frame is always breaking. Had to get a welder to the field every year. The seed disc opener plugs easy in sandy ground, causing seed to be buried at least 4 in. instead of 114 in. Needless to say, it has to go, but I can't get rid of it, Even our Allis Chalmers dealer wouldn't touch it.”
Daniel J. Lowe, Laurel, Mont: ‘‘Is there any way we can make companies show justification on their pricing?” asks Daniel, frustrated with repair costs on his Allis Chalmers 7580 4-wheel drive tractor and L2 Gleaner combine. ‘Both are excellent pieces of equipment but the dollars for minor repairs are staggering. Two internal components for a constant velocity universal joint, which should cost $45 maximum, cost me $347. This is way beyond reason and the list grows with other items.” Except for the minor repairs, he's happy with his 7580 AC tractor. ‘My prime reason for buying this model was because have had hearing problems and have been advised to avoid any loud noises. Allis Chalmers has the noise-reducing cab need. In the field, the 7580 responds well with power. We pull 40 ft. of toolbar with it and work at 5 mph.”
David Peterson, Dumont, Iowa: Heading his “best buy” list is his MFS 30-ft. grain bin with fan burner and Sukup spreader and Stirator. “It’s the second one I've purchased and performs just as well as the first. The price was right and the installation real professional." He's had trouble with a 17-ft. Allis Chalmers 2300 tandem disk. “Its weight and blades seem alright but the drives between the wings, the scrapers and even the wheel bearings on the four transport wheels are continually wearing out. Besides the nuisance, these parts are very overpriced."
Andy Myers, Dallastown, Penn: He's had problems with his John Deere 250 grain drill, ‘We can't seem to get the drill to sow the amount of grain we set it for. I set the drill for two bushels of oats and got four bushels instead. Also, the fertilizer doesn't hold out right. I had the dealer look at it and he couldn't find anything wrong. Drill seems sound otherwise. “I'm very pleased with my 185 Allis-Chalmers tractor. Traded a same-size International unit. Handling and fuel economy are great, and the AC actually outperforms the Farmall. Only problem was dirt in the fuel tank, but the dealer fixed it the next day.”
Frank B. Walton, Tipton, Iowa: “I'm 86 years old and not interested in buying machinery, but it seems to me there is a lot of bum machinery on the market now. Our worst buy ever was one of those little low-built Allis Chalmers corn pickers. When you picked corn it would bring in everything but the roots. The company soon quit making it and built the best picker available. Lemons generally don't last long or the company goes out of business.”
Jay Elsasser, Kenton, Ohio: Jay says about the only improvement he'd make on his Allis Chalmers 7000 tractor is to enlarge the cab. ‘‘Otherwise, we've had no trouble so far. Plenty of power and torque and we're very pleased with the 301 turbocharged engine and power shift transmission. Have had AC tractors and combines for the past 10 years and am very pleased with them.”
Clifford Aikens, Jr., Clymer, N.Y: He's disappointed with his New Idea 9-ft. Cutditioner. Does a good job of mowing, but the windrowers are not designed right, If the hay is damp, it builds up on them and falls off in bunches. It gradually builds up until it plugs the machine.” Clifford's “best buy" nominations include his Martin manurg spreader (does an excellent job on semi-solid manure”) and his 7000 Allis Chalmers tractor (“excellent cab, good power and handles well. Local dealer is tops for service’’).
James Bonnar, Roland, Manitoba: “This shift is the best I've had in all my experience with Allis Chalmers tractors,” says James, pleased with his 145 hp. 7045 with power-shift transmission. ‘My wife likes to drive it over any other tractor. Have had no problems with it. “Another good buy was a used Gleaner “M” combine,"’ continues James. ‘“‘Handles any heavy swath of grain with ease. Was used on our 640 acre farm, plus a lot of custom work, with only one minor problem.” One more “best buy" was a Polaris 340 snowmobile. ‘Great way to get to snowed-in granaries to check on grain, and gave us many enjoyable hours of snowmobiling over frozen fields. Wish I'd bought one years ago.”
Harvey Anliker, Forbes, N. Dak: His “best buy” was actually a 40-ft. field cultivator-digger he built himself. I] built it to get away from problems of diggers on the market. The steel is twice as strong as that the factories use, but most important, the cost was less than half that of any digger this size on the market.” Harvey is disappointed with his 7000 Allis Chalmers tractor. ‘The cab fell apart within 6 months, and the turbo-charger had to be replaced twice. The front crankcase seal leaked, the oil cooler had to be replaced, we had trouble with the transmission, and had problems keeping the front wheels aligned due to poor spindles." (Continued on next page)
Dick Heatherman, Almira, Wash: “It's as close to indestructible as any piece of machinery I've ever seen,” ‘‘As close to indestructable as any piece of machinery I’ve ever seen.” says Dick about his Allis Chalmers 7-shank, 3-pt. V-ripper subsoiler, his nomination for “best buy”. He's also happy with Kelly Tire Co. for promptly taking care of problems with the company’s tires on his John Deere 8630 tractor. “They started to crack at the lugs so the company sent a dealer out to measure wear, They figured 80% left in the tires and sent me new ones at 20% of new price. At last, was treated fairly by a company. “ wish the Deere 8630 was as reli“able,” he adds. “John Deere or I have spent close to $2,000 for every 100 hours the tractor has runand there are only 2400 hours on it. Down time is the joke with John Deere, was down six weeks once waiting for parts and right now haven't seen the tractor for 32 days waiting for parts.” Dick adds that he's also had problems with his ‘‘Adja silver spot marker. The principle is great but it isn't accurate enough. The marker might drop all its paint every 4 ft. for half a mile, and then be empty for the rest of my 5 mile spray supply, leaving me wandering around. Its pattern of paint spray is erratic and unpredictable.” Dick also has acombine complaint: “I've rented a new Allis Chalmers MH or MHz2 for five years and will verify that they can eat a lot of wheat and do a good job, but each lacked quality control at the factory, and dealer prep, too,” he explains. “I've lost bearings, the air conditioner quit after one half hour, belts weren't lined up and other small things were wrong, requiring a 160 mile round trip to get parts." Glenn R. Damman, Melbourne, Towa: “I'll match it against any competitive brand of the same horsepower. Just can’t say enough about this tractor,”” says Glenn about his “best buy’’ White 2-70 tractor. ‘I bought it in November of 1978 and have put on 500 hrs. without a bit of trouble or expense. Plenty of power and economical on fuel. “I'm also pleased with my New Idea manure spreader,” he adds, “Nothing cheap about it and well-constructed, Use it every day without a bit of trouble.”
Bob Doty, Lovington, Ill.: ‘It started burning off the first time used my tractors,” says Bob, who is disappointed with ‘“Rust-Oleum No. 4200 heat resistant paint. “Il cleaned and sanded all the mufflers on my diesel tractors and combine, and applied two coats. It was supposed to be good for temperatures up to 800° 1 His “best buy” is an Allis-Chalmers 1300 series, 30-ft. wing field cultivator with a 3-bar Remlinger harrow, “The rubber-mounted shanks run flat on the field cultivator, instead of springing back like most spring-mounted shanks do. This lets the A-C cultivator hold its depth, pull easier, and the sweeps maintain their points when they wear rather than rounding off. The Remlinger harrows are heavily-built and never cause problems.”
Bob Griteman, Napoleon, Ohio: “Until we put on Acra Plant shoes, we had trouble with disc openers plugging in wet soil on our Allis Chalmers Air Champ planter. Now, it plants at an even depth in all field conditions. We even used it to double-crop soybeans after wheat. with the straw left on the field, and had a very good stand,” Bob's also happy with Dual herbicide fron, Ciba-Geigy. ‘Dual cleared up our nutgrass problem. Used it both pre-plant incorporated and pre-emergence with good results.”
Robert C. Johnson, Bluffton, Ind: His ‘best buy’ nomination is a 1978 7040 Allis Chalmers tractor. ‘My wife especially likes the hydraulic system and the six speed power shift transmission. It's quiet, comfortable, easy to handle and has plenty of power. We've had no problems in over 500 hours of use.”
Frank Thomas, Danville, Ind: “My old John Deere grain drill was something you could be proud of — this new drill isn't,’ says Frank, who's unhappy with his model 8200 John Deere wheat drill. “It’s very poorly constructed. The John Deere cylinder strains the tongue and the whole drill when extended, The press wheels don't roll when the ground is damp and the acre counter has never been accurate. Dealer did give us anew marker, but it's still not right.” On the plus side, Frank is well pleased with his 4430 John Deere tractor. ‘After 9500 hours we've had no great problems, You never have to touch the brake and I think John Deere has the best hydraulic system of any tractor manufacturer, although their seats have never been as comfortable as Allis Chalmers or International Harvester."
Donnie Collins, Centralia, Mo: ‘“‘We saved several thousand dollars by buying a Ford 8700 tractor instead of a John Deere or Allis Chalmers model of the same size. We own a John Deere tractor and three Allis Chalmers but the Ford 8700 is the only one that has gone a full season without a breakdown. We were so satisfied we bought a Ford 9700 to go along with the 8700,” Donnie adds that he’s ‘very pleased with our Deere 7700 planter, especially last year when planting was late. We could easily plant 90 acres in a half day, leaving the other half to work our ground.”
William A. Sparks, Milmine, Ill.: “There's nothing wrong with this tractor except that you pay $20,000 and get a $15.00 seat,”’ says William about his Allis Chalmers 7030. “I spent $300 to make my own bracket and mount a Bostrom heavy-duty Viking T-bar. For $20,000, that's what I should have received in the first place.” On the positive side, he’s pleased with his Chem Farm 400 gal. sidemount herbicide tanks and control valve. “The tanks are easy to mount and take off because the mounts are made to fit my Allis Chalmers, something couldn’t find before. The calibration book with it is right on the money.” Alfred A. Stillhorn, Evansville, TIL: He's impressed with his 1250 gal. Dari-Kool Bulk Tank with ThermoStor. “‘Thermo-Stor cools milk with 170 gallons of water and then retains the heat it collects. We use the water to wash cows and clean out the pipelines. We also run it through a radiator and it warms up the milkhouse from 40° to 72° by the time we're done milking. It’s a real money saver.”
Van Walkley, Pasco, Wash: Van Walkley, Pasco, Wa.: “The problem was that probably the dealer had some bad combines he wanted to get rid of but was unwilling to stand behind them," says Van who had problems with 2 Allis Chalmers combines which had been rented oul in 1966 and which he bought in 1977. “The combines were represented as being ready for harvesting. It took 5 men over 2 days to finally get them working properly. Bearings, shafts and some electrical components gave problem all through harvest. Combines were to be warranted but was charged for all the work.” On the plus side, he has had good results with Monsanto's Roundup herbicide: “Although expensive, it sure controlled the few Canadian thistles had, Looks as if it will be a good, all-around herbicide, Only problem might be that it drifts easily.”
John Weiss, Dow City, Iowa: John Weiss, Dow City, Lowa: He's well pleased with his Allis Chalmers Gleaner Model F combine. “I'm in “It saves me more time on my farm than anything else.” very hilly country and this 4 row combine has extra wheel spacers to give it extra width for sidehill stability. It's very simple to replace bearings in it. The dealer gives me excellent service.”
Paul Conkright, Jones, Mich: Paul Conkright, Jones, Mich., who equipped his Gleaner K combine with a $9 chaff leveler attachment for the cleaning shoe. It consists of two 212 by 30 in. strap irons fastened to the front of the cleaning shoe sides and permits full speed harvesting on side hills. “It seems impossible that such a simple, low cost device could let the operator go from a crawling speed to full-speed, full-capacity harvesting on side hills without throwing over any grain,” says Paul, one of approximately 50 randomly selected readers who nominated “best” and “worst” buys for this issue of FARM SHOW (lor more details on the new low-cost side hill attachment, see your Allis Chalmers dealer.) “It did everything the company said it would,” says
Dale Nielson, Chapman, Neb: Goodrich radial tires: One season's experience has sold Dale Nielson, Chapman, Neb., on Goodrich radial tractor tires. They'll do almost the work of dual wheels any time,”’ says Dale. who equipped his new Allis Chalmers 7000 tractor with 18.4 by 38 in. radials, As for the tractor itself, Dule notes that “it has performed quile well, starts easy when cold and is easy on fuel. It's small enough for 30 in. rows and has power to spare for an 8 row cultivator.” Dale is happy with his New Idea model 709 Uni-Tractor, except for a trash plugging problem with the radiator: “In picking one 20 acre patch, we cleaned the radiator with each truckload," he recalls. ‘There is no way to blow air through to completely clean it.” Dale has high praise for the way New Idea has stood behind the machine. “Once they discovered they had a problem, they bent over backwards to help. The company tells us it’s a design problem, that they're working on it, and that all changes will be put on at no cost to me. From
Joe Sherle, Hobart, Okla: Joe Sherle, Hobart, Okl.: "The engine and drive train are good, but GM needs a beefed-up automatic transmission for its 4-wWheel drive pickups,” says Joe. He notes that the transmission in his 1976 3/4 ton Chevrolet “has been removed and overhauled 3 different times during 50,000 miles of operation. The 330 automatic is just not strong enough to handle 4-wheel drives." On the plus side, Joe says his 32 ft. Sunflower chisel plow “has a heavy 4 by 6 in. frame which adds plenty of weight. The rocker shafts are mounted below the frame near the wheels to increase leverage. The optional dual wheels on the center section save bearings and help prevent flat tires.” Jake Cutchin, Jr., Suffolk, Virg.: “My only complaint is difficulty keeping the monitors adjusted so they work properly. It's next to impossible.” says Jake of his Allis Chalmers Gleaner F combine. He describes it as “one of the smoothest running and handling combines (Continued on page 26) 2-3 FARM SHOW (119
Ellis Adee, Minneapolis, Kan: Ellis Adee, Minneapolis, Kan. He's well pleased with two “best buy" nominations — a 24 ft, 1407 Krause tandem disk and a 21 ft. Sunflower folding chisel plow. He adds that a 7080 Allis Chalmers tractor, which he traded off after less than 1000 hours of use for “‘an ugly, plain simple 900 Versatile", did everything he expected of it powerwise. “The dealer and shop service were excellent, The parts department manager would break his neck to keep me happy. Very little downtime. The problems had were minor, such as overload clutch slipping (covered by warranty) and hydraulic lines and valves leaking (factory's fault). The most scarry thing was the factory’s failure to torque the bolts holding the differential ring gear to the carrier, resulting in bolts next to untorqued bolts breaking off like a row of dominos until all were gone. The hydraulic controls, cables, etc. were
William Fetz, Maiden Rock, Wis: William Fetz, Maiden Rock, Wis.. says he's well pleased with his model 495 Haybine: We've cut about 600 acres over 14 vears and have only replaced three sections. We think this is remarkable.” On the negative side, he's been disappointed with his Model 27 blower because of bearing problems; “Non-greasable bearings have gone out. It takes about 3% hrs, to replace one. Another bearing went out today. We'll have to take off the whole spinner unit to replace it.” Allis Chalmers: “It does an excellent job of threshing and is a well balanced machine and nice to run,” reports
Vernon Virgin, Lebanon, Ill: Vernon Virgin, Lebanon, III: “We examined specs on several 4-wheel drives and chose Allis Chalmers (model 7580) because of dealer availability and price. Most pleased with first 100 hrs. performance and the dealer's cooperation when problems did develop.” Vernon registered strong disappointment with his “Big Dooley” Chevrolet series 30 truck with crew cab and 454 motor: “Chevrolet truck division does not help solve engineering problems involved with poor performance and oil consumption of the 454 cu. in. engine. They give the impression I’m the only one having the problem. I know better.”
Norman Culverwell, Craig, Colo: Norman Culverwell, Craig, Colo.. says his new Stieger Cougar is “the ultimate in a farm tractor. It’s comfortable, quiet and the caterpillar en“Tt’s been longer than 12 months but the lemon taste lingers on.” gine has a sufficient amount of power for any job.” Norman notes that he’s unhappy with his Allis Chalmers hillside combine which. he says, “gave problems from the minute it was put to work. The block man was called several times but never showed up. Most problems were related to the hydraulic system.” Norman also faults his Melroe plow, noting that “it broke up and wore out all over. The manufacturer claimed the dealer didn't have it adjusted properly. The dealer did several repairs and lots of welding on pieces that should have been replaced by the factory.” “Pearce Equipment at Clay City has taken good care of the service,”’ says Stanley Greathouse, Johnsonville, lll, who nominates his Case 1370 tractor as his “best” buy: “I've used this tractor one year and have been happy with performance and horsepower. It has a good cab, heater and air conditioner,” Dealers were directly responsible for “best” and “worst” buys nominated by William Allegar, Benton, Pa. He’s happy with the dealer he dealt with in buying his Ford 5000 tractor: “Had a few problems with it but the dealer was very cooperative. Fuel economy is very good and I'll be back for further business.” William is unhappy with after-the-sale service he got from the dealer who sold hima new IH 400 Cyclo air planter: “It developed a hydraulic oil leak when lifting the planter. Dealer didn’t want to know me after I paid cash for the machine.” That same make and model planter was one of the “best buys” Sackreiter Farm, St. Charles, Minn., has made: We planted over 300 acres of corn in a few short days and everything worked like a clock after a few minor adjustments," says Leon Sackreiter of their new IH 400 Cyclo 8-row air planter. ‘The Dickey-john monitor was well worth the extra investment.” Leon notes that a Gehl 2500 skid loader, purchased 8 months ago, “works very well when everything
Clifford Kuskie, Nebraska: Clifford Kuskie. of Brule, blames improper installation of air motors for his dis-satisfaction with an 8-row Allis Chalmers air planter: “The AC fieldman told me the air motors were running too slow, Real cause was the dealer who had “As long as a company treats me this way I see no reason to change brands. only installed three air motors instead of four. The planting was very uneven and hard to keep ata uniform depth. Air could not hold the seed in the holes of the plate. Skips and doubles were common. Installing one air blower per two rows did help some,” reports Clifford, who ended up trading it for a 7100 Deere planter which, he says. “did an excellent job". Here’s how other farmers who nominated new corn planters size them up:
Wes Moeller, New Liberty, Iowa: Wes Moeller, New Liberty, lowa. IH 574 tractor: Millard Morgan, Jr., Bailey, N.C., is well pleased with its performance but wishes it had ‘‘a larger canopy, and sound deadening material underneath to prevent sound reverberations”, Allis Chalmers Gleaner combine: “It took 100 bu. per acre wheat with lots of straw with no trouble. Did a good job on pinto beans — didn't crack any and got lots of dirt out. About as good a job as I've seen, On corn, it got all the corn off the cob and didn't blow any over. Doesn't use much diesel fuel.” Robert Steyaert, Hillrose, Colo. He's also well pleased with a Dakon pickup and windguard for the combine: ‘The pickup teeth don't break easily but, when they do, they're replaced easily and don't cost a fortune.” FARM SHOW 0 14
Robert Wirth Ellis, Eminence, Ky: Robert Wirth Ellis, Eminence, Kty., is impressed with his new 185 Allis Chalmers tractor: ‘It isn't too big or too small. Drives and rides with ease. Has big tractor features without huge size, Controls are easy to reach, both hand and foot.”
Allis-Chalmers 185 tractor
7 Best Buys2 Worst Buys“My 2006 Chrysler Town and Country van rides nice and is fuel efficient. This is the third one I’ve owned over the years.
“My 1976 Allis Chalmers 185 tractor is economical to operate and has never had a complete overhaul. No problems.”
“My Allis-Chalmers 185 and 175 tractors are fun to operate and easy to work on.
“Anyone want to buy a Yetter Weight Transfer Hitch System? I bought this item new and have never used it. I’ve been trying to sell it, trade it, or give it away ever since I bought it, but I can’t find anyone who’s interested.”
“I’m retired now but when I farmed I really liked my 1977 Deere 4430. It was very reliable and on a per-acre basis was the cheapest running tractor I ever owned. Very quiet and smooth running. The only problem I ever had was when the high-low powershift clutch went out at about 5,000 hours. Apparently it was a factory defect. As far as handling goes this tractor even beat my 1970 Deere 4020. It was rated at 125 hp but easily put out 140 hp - without any modifications. It had a weak hydraulic system on the hitch and the remote cylinders. I understand this was a problem on all the 4430s. The 4020’s hydraulics were much better. The original lights were pitifully weak so I added some more. I also installed front fenders to keep gravel from hitting the windshield and to improve the tractor’s looks.”
“I wasn’t as satisfied with my 1980 Allis-Chalmers 185. It had way too much downtime. The oil cooler sprang a leak and oil got all over everything. The left rear seal went out. The float on the fuel gauge was made of plastic which dissolved and kept plugging the fuel system. I finally replaced it with a brass one. The injection pump jumped out of time and the dealer couldn’t fix it. The air conditioner thermostat never lasted more than a couple of months so I finally replaced it with another brand which worked. The tractor had plenty of power for its size but had a noisy engine. Fuel economy was only fair. The tractor was hard to shift without clashing gears. The power steering was nearly nonexistant under 1,800 rpm’s, which meant that I had to ride the hand clutch when turning while cultivating or planting. It did have a good hydraulic system.“ owner of a 1976 Allis-Chalmers 7040 equipped with a power shift transmission. “The transmission doesn’t have enough different field speeds and the tractor is hard to start when the weather is cool. Otherwise it’s a good tractor.
“My 1969 Allis-Chalmers 190 XT equipped with a 95 hp diesel engine has a lot of power and starts good. It’s also economical to operate.”
“The only problem in 2,500 hours of operation was a broken brake rod,” says Gerald, pleased with his 1972 Allis-Chalmers 185. “It’s an excellent tractor for a small acreage like mine.”
Gerald added hydraulic outlets on the front of the tractor for operating a front end loader. “This eliminated hoses running across the operator’s platform. They were a tripping hazard and interfered with normal clutch operation.”
Gene S. Bontrager, Kalona, lowa: Gene says his Allis-Chalmers WD-45, originally purchased by his father in 1954, is the best buy he's made over the years, “It was the primary tractor on our farm until replaced it with an Allis-Chalmers 170 diesel tractor in 1977. My father had purchased a 3-bottom, 4-in. Snap-Coupler plow, a 9-ft. SnapCoupler disk, and a model WD 2-row cultivator to go with the WD-45. still own the cultivator and tractor. In the 41 years this tractor has been in our family it has never had a major breakdown, It has been overhauled twice but has never let us down during a busy planting or harvest season. It doesn't have an hour meter but I'd estimate it has over 15,000 hours - and still counting. “My 1981 Allis-Chalmers 185 tractor is also a best buy. The only major repair was to replace the water pump last year, It's fun to drive and easy to maintain, use it to pull a 15-ft. disk and a chisel plow. We pull the chisel plow 15 to [8 in. deep and go 5 to § 1/2 mph. I've also used it to do a lot of other tasks with no problems,”
Donald Klock, Fort Plain, N.Y.: Donald's had good luck with his International 966 and 1466 tractors, both purchased used. “They're reliable tractors and just keep on going. Parts are readily available and they're relatively easy to repair. The brakes, hydraulic pump, and pto clutch are easy to get at and repair. “My worst buy is my Homelite 245 chain saw. It was in the shop more than in the woods. The rewind starter went bad and plastic lines to the carburetor and fuel pump failed. A part on the starter came loose and tore a hole in the oil tank. “My Allis Chalmers 185 tractor is the worst piece of junk I've ever owned, It has a rubber transmission, the pto is worn, and the brakes are a joke. Also, under load the exhaust puts out so much smoke you'd think you were burning coal.”
Frank E. Jirik, Webster, Minn.: “I'm well pleased with my Allis-Chalmers 185 tractor. No problems. I also have a 40-yearold Allis-Chalmers WD45 tractor that I’m still using.”
Howard Woehrer, Centertown, Mo.: Howard’s had good luck with his 1991 Westendorf TA 26 loader mounted on an Allis-Chalmers 185 tractor. “It’s built very strong and designed so that it’s easy to mountand dismount from the tractor. Works great for loading and stacking large round bales. The quik-tach brackets let me change from bucket to bale spear in seconds.”
Earl Krewinghaus, Venedy, Ill: Earl says his 1985 Deere 2950 tractor heads his “worst buy” list. “The air conditioner belt is too long to run on two pulleys. It loosens up just enough to make the air conditioner “You couldn't give me a General Motors product now.” wobble which causes the belt to tear. We tighten the belt frequently, yet we still have to replace it about twice a year.” Bob Gates, Lincoln, Calif.; Bob has had trouble with his 1986 Chevrolet 3/4-ton pickup. “The major problem was excessive oil usage - one quart every 500 to 700 miles. After 1 1/2 years of fighting and arguing with General Motors, I decided to take a loss and buy a Ford pickup which I'm happy with. It’s hard to understand why General Motors won't satisfy a customer to secure a long term buyer. You couldn't give me a General Motors product now.” Mer! Montel, Pierceton, Ind.; “It’s large enough to do some heavy work but small enough to take care of most of my utility work,” reports Merl, pleased with his 1978 Allis-Chalmers 185 tractor which he purchased two years ago. “I mounted a heavy duty loader on it which makes it an allaround tractor. Too bad they quit manufacturing this tractor.”
Allis-Chalmers WD45 tractor
8 Best Buys0 Worst Buys“In 1978 I bought a used 1954 Allis Chalmers WD45 tractor with a stuck engine. I replaced the valves and rings and added a live belt-driven hydraulic pump, power steering, and New Idea front-end loader. I still use this tractor almost every day. I replaced the rear tires with 18.4 by 26 tires with fluid, so it really pulls good.
“We also own a 1976 Ford 9600 tractor with no cab and a 1978 Allis Chalmers 7020 with cab that we bought about 18 years ago. Very few problems with either tractor. These tractors don’t use oil and start right up every time.
“Over the years I worked for several different companies where I drove newer model pickups including Ford, Chevrolet and Dodge. However, they all seemed to have minor but irritating problems so now I always buy used models, primarily Fords. I drove a 1978 Ford F-150 4-WD until it had about 396,800 miles, and now I’m driving a 1999 4-WD Ford that has more than 197,000 miles on it but still runs good.”
Harley says his best buy of all time is his 1956 Allis-Chalmers WD-45 tractor which he bought used 15 years ago. “I think it has more than 15,000 hours on it. It never fails to start and hasn’t required any repairs. It’s made simple and is easy to maintain. I use mounted implements with it including a sickle mower, loader, rear blade, cultivator, side delivery rake, plow, etc.”
“My best buys of all time are my 1956 Allis-Chalmers WD45 and 1962 Ford 901 tractors. The Ford model is equipped with a diesel engine. I bought both tractors used and they’ve been very reliable.
“My 1995 Ford F-250 pickup equipped with a Power Stroke diesel engine is a best buy.
“MyDeere 332 lawn tractor equipped with a 50-in. mower has about 600 hours on it and is also a best buy.”
“My best buy of all time is my 1953 Allis-Chalmers WD-45 tractor which I bought new. We’ve used it on our 250-acre farm along with an Allis WD tractor.”
“My 1997Polaris Explorer 500 4-WD ATV is my best buy. It always starts right up. No problems.
“My 1954 Allis Chalmers WD 45 tractor still runs like new. Over the years I’ve spent very little money on it.
“My 1988 Oldsmobile has more than 105,000 trouble-free miles and gets more than 30 mpg on long distance trips. It still drives and handles like new.”
Gene S. Bontrager, Kalona, lowa: Gene says his Allis-Chalmers WD-45, originally purchased by his father in 1954, is the best buy he's made over the years, “It was the primary tractor on our farm until replaced it with an Allis-Chalmers 170 diesel tractor in 1977. My father had purchased a 3-bottom, 4-in. Snap-Coupler plow, a 9-ft. SnapCoupler disk, and a model WD 2-row cultivator to go with the WD-45. still own the cultivator and tractor. In the 41 years this tractor has been in our family it has never had a major breakdown, It has been overhauled twice but has never let us down during a busy planting or harvest season. It doesn't have an hour meter but I'd estimate it has over 15,000 hours - and still counting. “My 1981 Allis-Chalmers 185 tractor is also a best buy. The only major repair was to replace the water pump last year, It's fun to drive and easy to maintain, use it to pull a 15-ft. disk and a chisel plow. We pull the chisel plow 15 to [8 in. deep and go 5 to § 1/2 mph. I've also used it to do a lot of other tasks with no problems,”
Frank E. Jirik, Webster, Minn.: “I'm well pleased with my Allis-Chalmers 185 tractor. No problems. I also have a 40-yearold Allis-Chalmers WD45 tractor that I’m still using.”
Fred Dunlop, Stayner, Ontario: “My best buy is aused Deere 25504-WD tractor. Ithandles a 5-furrow 14-ft. plow in fifth and sixth gears and uses only about 1 gallon of fuel per acre. The quiet cab offers excellent visibility.” “T also like my Allis-Chalmers WD45 diesel tractor.”
Allis-Chalmers WD tractor
6 Best Buys0 Worst Buys“My best buy is the 1949 Allis-Chalmers WD my dad bought. It was our only tractor…”
“My wife and I couldn’t be happier with our Grasshopper mowers (ph 620 345-8621; www.grasshoppermower.com). We mow about 10 acres, much of it wooded, and these mowers never let us down. We’ve relied on Grasshopper mowers for more than 30 years and wouldn’t have anything else. We currently have a 10-year-old 725K front-mount model and just replaced a 26-year-old 718K model with a 620T model. The 718 model was still running strong but I felt I should replace it before I retire.
“At about 2,300 hrs the 718 model developed a hydro problem with one of the drives. Grasshopper Service out of Kansas provided a rebuilt unit at a reasonable price. The Grasshopper vacuum attachment does an outstanding job, and you just can’t beat its capacity and ease of operation.
“My dad’s best buy was a 1953 Allis Chalmers WD tractor that he bought new. This tractor was the workhorse on our dairy farm. It ran day and night in the spring and fall for many years, requiring little more than tires and routine service. The tractor is now semi retired, but it still starts without fail and purrs like a kitten.”
“In 2003 we bought a used 2002 Toyota Sienna van with about 20,000 miles on it. Now it has more than 230,000 miles. Everything on the van is original except for parts that were replaced on a scheduled maintenance program. The battery is still going strong. I can’t find anything negative to say about this van.
“I have a problem with using modern gas in older engines. For example, I have a 1946 Allis Chalmers WD tractor that I’ve used for 25 years. It wouldn’t pull or idle well on the new gas until I started adding a quart of automatic transmission fluid to each 5 gal. of gas. I also installed electronic ignition and one-step-hotter spark plugs. Now the tractor runs great.”
“My 1952 Allis Chalmers WD tractor is my best buy. I bought it used in 1996 with a Wagner front-end loader on it and have used it ever since with only minor problems. It still has the original clutch and rear tires on it and has required only routine maintenance. It has been used hard for many years but now is semi-retired like me. It’s a great tractor.”
“I bought my Allis Chalmers WD tractor from my brother-in-law for $400. I’ve used it to pull logs for firewood, plant crops, do road work, etc.
“I’ve had my Ferguson T-20 tractor for only a year but it has never failed to start, even during the winter.
“My Struck tracked tractor powered by a 15 hp Kohler engine and equipped with both a blade and bucket is a worst buy. One problem is the gas tank is too small. Another is that the engine doesn’t have as much power as advertised and it’s hard to get at. This tractor has a Japanese-made carburetor which is hard to get parts for. A new carburetor sells for well more than $100.”
“My 1950 Allis-Chalmers WD and 1960 Allis-Chalmers D-12 tractors are both best buys. I farmed with them until 1975 when our dealer went out of business. I still own both tractors. They’ve both been overhauled once.
“Since 1975 I’ve been using Deere tractors - a 2030, 2240, 1050 MFWD, 350 dozer, 575 skid steer loader, and 212 and 345 garden tractors. I had to replace a cracked fuel injector on the 2030 five years ago and also replaced a fuel pump on the 2240. The Deere tractors are all best buys, too.
“My New Holland haybine and manure spreader and Fox chopper are best buys. So is my Deere 345 round baler.”
Allis-Chalmers D17 tractors work great
5 Best Buys0 Worst Buys“My Allis Chalmers D17 tractors work great and never fail to start. All I’ve replaced are the brake linings and a steering U-joint. Our old 1950 Allis Chalmers WD tractor also still works great.”
“My 2006 Vermeer 505 Rebel round baler is as near perfect as any machine I’ve ever owned.
“I own five Allis Chalmers D17 tractors and they’re all still in great shape. We bale a lot of hay and these tractors are all used in our haying operation.”
“My three 1966 Allis-Chalmers D-17 tractors are all best buys. They still start and run like new.
“My 1998 Homelite E-Z chainsaw starts and runs good. I’ve owned three of them over the years.
“My 1994 Chevrolet pickup equipped with a 4.3-liter engine is a best buy. This is my second Chevy pickup. I still have the first one, a 1988 model, which runs and drives perfect.”
“My 1991 Mercury Marquis is a good car. “My 1985 Hesston 5510 big square baler is the most trouble-free piece of machinery I’ve ever owned. “My 1972 Chevrolet pickup is still going strong after 25 years. My 1988 Chevrolet pickup equipped with a 4.3 V-6 engine also works good. “Other best buys include my Homelite XL12 chain saw, New Holland 273 small square baler, and 1964 Allis-Chalmers D17 tractor.”
“One of my best buys is my 1967 Allis-Chalmers D17 series 3 tractor equipped with an Allis-Chalmers 417 front-end loader that we bought in 1977 at an auction sale. We use it mostly to haul bales for 100 head of cattle and also to haul bales off the field in the fall. The engine has been overhauled only once.”
Allis-Chalmers 190 XT tractor
4 Best Buys0 Worst Buys“My husband likes his Allis Chalmers 190 XT tractor. It was his first major tractor purchase when he started farming,” says Shauna. “This tractor is easy to shift, and the cab has good visibility. We installed speakers and a cassette-radio in the cab. It’s a nice tractor.”
A 1998 Homelite Weedeater with 17 in. of cutting capacity rates as their “worst buy”. “It worked well only for one summer. Then, even though it was stored in a dry shed, the primer bubble cracked and had to be replaced. The set screws to adjust the carburetor had plastic tops, which stripped after only a few adjustments were made. The slip clutch seized a few times even though it was kept dry. The fuel line was replaced twice as it, too, kept cracking. We’re tired of fixing this tool every time we want to use it. It was officially retired last summer by a second hand Ryobi that looks the worse for wear, but actually works. The Homelite was pampered and looks like new, but it was junk.”
“I’m retired now but when I farmed I really liked my 1977 Deere 4430. It was very reliable and on a per-acre basis was the cheapest running tractor I ever owned. Very quiet and smooth running. The only problem I ever had was when the high-low powershift clutch went out at about 5,000 hours. Apparently it was a factory defect. As far as handling goes this tractor even beat my 1970 Deere 4020. It was rated at 125 hp but easily put out 140 hp - without any modifications. It had a weak hydraulic system on the hitch and the remote cylinders. I understand this was a problem on all the 4430s. The 4020’s hydraulics were much better. The original lights were pitifully weak so I added some more. I also installed front fenders to keep gravel from hitting the windshield and to improve the tractor’s looks.”
“I wasn’t as satisfied with my 1980 Allis-Chalmers 185. It had way too much downtime. The oil cooler sprang a leak and oil got all over everything. The left rear seal went out. The float on the fuel gauge was made of plastic which dissolved and kept plugging the fuel system. I finally replaced it with a brass one. The injection pump jumped out of time and the dealer couldn’t fix it. The air conditioner thermostat never lasted more than a couple of months so I finally replaced it with another brand which worked. The tractor had plenty of power for its size but had a noisy engine. Fuel economy was only fair. The tractor was hard to shift without clashing gears. The power steering was nearly nonexistant under 1,800 rpm’s, which meant that I had to ride the hand clutch when turning while cultivating or planting. It did have a good hydraulic system.“ owner of a 1976 Allis-Chalmers 7040 equipped with a power shift transmission. “The transmission doesn’t have enough different field speeds and the tractor is hard to start when the weather is cool. Otherwise it’s a good tractor.
“My 1969 Allis-Chalmers 190 XT equipped with a 95 hp diesel engine has a lot of power and starts good. It’s also economical to operate.”
Joe’s the owner of a 1976 Allis-Chalmers 7040 equipped with a power shift transmission. “The transmission doesn’t have enough different field speeds and the tractor is hard to start when the weather is cool. Otherwise it’s a good tractor.
“My 1969 Allis-Chalmers 190 XT equipped with a 95 hp diesel engine has a lot of power and starts good. It’s also economical to operate.”
“We bought our Allis-Chalmers 190 XT used several years ago. Considering its age, it does an acceptable job. We had a welding shop fabricate a cover steel over the driver’s seat. For a while we used a canvas canopy but a windstorm tore it off.”
Allis-Chalmers 6080 tractor
3 Best Buys1 Worst BuyTwo white silos from Star Silos (St. Geneive Ill.) rate as Rocky’s “best buys.” One silo was put up in 1977 and the other in 1990. “These silos have never needed resurfacing, although they were used every day until 2001 when we sold our milk cows. Now we use them to feed corn silage to our feeder cattle from November through April.”
A 1996 AGCO 8610 2-WD tractor rates as his “worst buy.” “I traded in an Allis Chalmers 7000 and a Deutz 6206 for this tractor and paid plenty to boot. Everything on it went wrong. All the hydraulics went out as well as the oil pump and most of the gauges. I also had problems with the fuel pump, governor, and a sensor on the flywheel. A wheel bearing went out one day while I was cutting corn silage. I had to take the tractor back to the dealer seven times, and he’s located 120 miles away. The company did pay for some of the repairs, but I had to pay for others. This winter the starter went out and had to be rebuilt. The fuel injector cracked last fall while I was cutting corn silage and fuel got in the oil. They replaced one injector, but the fuel pump cost me more than $2,300. The tractor needed other work which could’ve been done before the warranty expired, but the dealer was too busy and the warranty ran out.
“On the other hand, my 1982 Allis Chalmers 6080 tractor, which I bought used, is still going strong.”
“My best buy is my 1993 Allis-Chalmers 6080 tractor which was a leftover 1992 model. After 4,000 hours, the fuel injector pump and injector were repaired. At 7,000 hours the rear tires and fan belt were replaced. It has 11,500 hours on it now but still runs like new. We change the oil every 100 hours and always install a new filter.”
“My Stihl 064 chain saw works well and starts up every time. “My 1990 Kubota 8950 tractor has more than 5,000 hours on it yet I’ve hardly spent anything on it. Starts right up at 15 degrees below zero as long as I use the glow plug for about three seconds. I just bought another one. “Our 1985 Allis-Chalmers 6080 tractor was a lemon from the start. We had problems with the clutch and transmission. It was in the shop every winter for five to six weeks for repairs.”
Arnold Ross, Webber, Kan.: “It has plenty of power and good fuel economy,” says Arnold about a 7110 Case-IH tractor, his best buy. “Ii has a comfortable cab that's dirt-free. Anc it’s easy to service.” A 1982 Allis-Chalmers 6080 tractor is Arnold's worst buy, “We've had it since 1985 and last fall the rear end went out. I had a hard time trying to find someone who could replace it. When finally did, the work was prived way too high for a used tractor, but went ahead and had it done because I really needed the tractor.”
Allis-Chalmers B tractor
4 Best Buys0 Worst Buys“I still use my 1950 Allis Chalmers B tractor and 1955 Allis Chalmers WD 45. Very few problems with either one. My 1982 Allis Chalmers D17 diesel tractor has 6,226 hours on it with no problems. My Deutz DX120 tractor has about 5,000 hours on it but still runs good. My 1966 Chevrolet 1/2-ton pickup still looks and runs good. I take good care of all my equipment.”
“My 1950 Allis Chalmers B tractor is my best buy. I use it for everything from plowing to cultivating to hauling firewood and hay work. It’s fun to use and dependable.”
“It still cranks easy and runs great,” says Dick about his “best buy” 1939 Allis Chalmers B tractor.
“One of my best buys is my 1978 Ford pickup equipped with a 302 cu. in. engine and overdrive transmission. It has needed very few repairs and the body has only minor rust. It has more than 251,000 miles.
“My 1950 Allis-Chalmers B tractor was a best buy. I used it for 34 years to do snowplowing, haying, logging, and hauling firewood and never had any problems.”
Allis-Chalmers 160 tractor
3 Best Buys0 Worst Buys“I haven’t had to make any major repairs to my 1973 Allis Chalmers 160 tractor. It still runs like a top.”
He’s disappointed with his 2015 New Holland 110 hp, 4-WD loader tractor. “I bought it in January 2016, and the following spring I was mowing with it when oil started leaking onto the belts, causing them to burn off and the tractor to overheat. The dealer installed new belts and I went back to the field, but the same thing happened again. The dealer came out to pick the tractor up and I traded it for a Kubota.”
“I’m happy with my 1970 Allis Chalmers 160 wheel tractor. The 3-cyl. Perkins diesel engine on it is a real miser on fuel.”
“My Allis Chalmers 160 tractor has been trouble-free. It’s powered by a Perkins diesel engine that starts good in cold weather. After 4,800 hours it still doesn’t use any oil.”
Allis-Chalmers 7000 tractor
3 Best Buys0 Worst Buys“It has plenty of power, is easy to drive, and starts good in cold weather,” says Dennis about his “best buy” 1984 International 5088 tractor. “It has about 4,600 hours on it.
“My 1975 Allis Chalmers 7000 tractor has plenty of power and is a best buy.
“My 2001 Deere 4400 tractor, equipped with a model 430 front-end loader, is my worst buy. It has about 1,200 hours on it. I’ve had trouble with the sync reverser and transmission slipping out of gear ever since it was new. It has been back to the dealer three times. The last time it was back they told me the linkage was worn out. I expected a better product from Deere and will be looking at other brands when it’s time to trade.”
“It handles great, has plenty of power and runs like a top,” says Allen about his 1978 Allis-Chalmers 7000. “My biggest complaint is that I wish it had a differential lock for the rear end.”
“My Allis Chalmers 7000 tractor has more than 14,000 hours on it and is a best buy. We rebuilt the pump and turbocharger last year. We also replaced the clutch at 11,000 hours and rebuilt the engine at 12,000 hours, but it really didn’t need it.”
Allis-Chalmers 200 tractor
1 Best Buy1 Worst BuyCecil’s best buy is an Italian-built Sitrex RP/8 13 1/2-ft. 6-wheel rake he bought used from his local Deere dealer in Clymer, N.Y. (06018 Trestina, Perugia, Italy; 075 854-0021, fax 0523). “Once we got it adjusted, it did a beautiful job of raking. We don’t know what year it is, but we wrote to the company in Italy and they sent us a book of instructions on how to adjust and use it.”
“They’ve all been good to me over the years,” adds Cecil, satisfied owner of a 1947 Farmall H, a 1950 IH 460, a 1973 Allis Chalmers 200 and a 1983 Same Panther 4-WD. “The 460 guzzles gas, while the old H runs all day on 5 gallons of fuel doing hard work. The first time we’ve ever had to send a tractor away for repairs was recently when the Allis developed internal transmission trouble and parts aren’t currently available.”
Don Braber, Goshen, Ind.: Don nominates his Ford 8000 tractor as a “best buy”. “It has 7,500 hours and works great.” On the negative side, “I’ve had lots of problems with my Allis-Chalmers 200 tractor mainly due to a poor rear end, Also the tractor is built too light. 1 can see why they don't build Allis-Chalmers tractors anymore.”
Allis-Chalmers 5050 diesel
1 Best Buy1 Worst BuyRobert is pleased with his 1968 Allis-Chalmers 5050 diesel. “It starts easily in even the coldest weather, has plenty of power and is easy on fuel,” he says. “It has many convenient features such as a foot accelerator, easy-to-use flip lever hydraulic hose hook-ups, and spin-out rear wheels that allow you to change tread width.”
However, there is an oil leak between the engine block and transmission and it wasn’t equipped with a tool box or adequate front end weighting, he adds.
“I installed a tool box from Quality Farm & Fleet. It works well and was easy to mount on the fender with an adjustable bracket to fit existing holes. I also added front end weights.”
Robert Peckham, Woodstock, Conn.: Robert's “worst buy” is his Allis-Chalmers 5050 tractor. “We rebuilt the front drive wheel and needed some new thrust washers. Deutz-Allis charged $23.48 foreach washer, but our Long dealer charged only $3.86. There are 12 of these washers on the tractor so we saved $235.44 by buying from the Long dealer. The Long dealer also sold a starter for only about half as much as the Deutz-Allis dealer.”
Allis-Chalmers 7020
1 Best Buy1 Worst Buy“In 1978 I bought a used 1954 Allis Chalmers WD45 tractor with a stuck engine. I replaced the valves and rings and added a live belt-driven hydraulic pump, power steering, and New Idea front-end loader. I still use this tractor almost every day. I replaced the rear tires with 18.4 by 26 tires with fluid, so it really pulls good.
“We also own a 1976 Ford 9600 tractor with no cab and a 1978 Allis Chalmers 7020 with cab that we bought about 18 years ago. Very few problems with either tractor. These tractors don’t use oil and start right up every time.
“Over the years I worked for several different companies where I drove newer model pickups including Ford, Chevrolet and Dodge. However, they all seemed to have minor but irritating problems so now I always buy used models, primarily Fords. I drove a 1978 Ford F-150 4-WD until it had about 396,800 miles, and now I’m driving a 1999 4-WD Ford that has more than 197,000 miles on it but still runs good.”
Ralph Yeager, Loveland, Ohio: “My Allis-Chalmers 7020 tractor is a worst buy. I've owned it about two years and have broken the shift cable twice. It first broke about six months after I bought the tractor. Thave no idea how long that cable had been on the tractor, but the second cable broke nine months later. I wasn’t about to continue replacing $25 cablesevery nine months sol developed aconversion kit which solves the problem. The broken cable is cut in half and rerouted to fit the kit so there’s no need to buy anew cable. A pull spring is installed on the bottom of the parkshift lever to pull the shifter down a little farther, The pull spring allows the range shifter to work much more smoothly and virtually eliminates binding when you shift to low range. (Contact: Ralph Yeager, 6725 Smith Road, Loveland, Ohio 45140.) Alan Irving, Murray Harbour, Prince Edward Island: A 1988 Deere 2755 2-WD tractor is Alan’s “best buy”. “This tractor 1s apleasure to operate. Ithas excellent power, convenient controls, and good lighting.”
Allis-Chalmers 7040 tractor
2 Best Buys1 Worst BuyJoe’s the owner of a 1976 Allis-Chalmers 7040 equipped with a power shift transmission. “The transmission doesn’t have enough different field speeds and the tractor is hard to start when the weather is cool. Otherwise it’s a good tractor.
“My 1969 Allis-Chalmers 190 XT equipped with a 95 hp diesel engine has a lot of power and starts good. It’s also economical to operate.”
Bill Bell, Deloraine, Manitoba: “Our 1977 Allis-Chalmers 7040 tractor is troublefree, easy to service, drives nice, and has good power. “Our Gleaner combines, a 1965 C11, a 1978 L2, and a 1981 L2 combine, do an excellent job. They're tough, easy to service, and fun to drive.”
Allis-Chalmers D15 tractor equipped
2 Best Buys0 Worst Buys“This loader tractor is like a hired hand,” says Philip about his Allis Chalmers D15 tractor equipped with a front-end loader. “It’s handy to use and is always there when I need it.”
A Flex-A-Bed adjustable bed rates as his “worst buy”. “I’m paralyzed from the waist down so we needed an adjustable bed. The motors on it went bad three times within a year. It takes six weeks to get the motors repaired. The bed is too high for my wheelchair so we made a ramp that has to be moved every day.”
“We just overhauled it for the first time last year,” says Eugene about a “best buy” Allis Chalmers D15 he bought when new and has used to plow 80 acres a year every since.
Allis-Chalmers tractors
2 Best Buys0 Worst Buys“My three Allis Chalmers tractors - an 8050, 7045, and 185 - have provided excellent service with hardly any problems.
“I like all my Gravely garden and mowing equipment.”
Robert’s the satisfied owner of several Allis-Chalmers tractors including a 1949 B and a 1955 WD45 equipped with a front-end loader, and a D17 equipped with a diesel engine. “The tractors have required very few repairs. All of them are still working good. I had an Allis-Chalmers 7010 tractor that developed a hole in one of the cylinder walls because we used the wrong anti-freeze. I haven’t had any other problems with it.
“I’ve used two Allis-Chalmers round bal-ers since 1959. On one of them the twine eyelet in the hood wore down about 1/8 in. It takes a lot of twine to do that.”
“My 1983 Deutz DX120 tractor still runs great.
“Over the years I’ve had 14 different Chevrolet and GM pickups. The last one I bought was a 1995 4-WD 1/2-ton model equipped with a 4.3-liter, V-6 engine. It has about 35,000 miles on it and has been trouble-free.”
Allis-Chalmers 170
1 Best Buy0 Worst BuysGene S. Bontrager, Kalona, lowa: Gene says his Allis-Chalmers WD-45, originally purchased by his father in 1954, is the best buy he's made over the years, “It was the primary tractor on our farm until replaced it with an Allis-Chalmers 170 diesel tractor in 1977. My father had purchased a 3-bottom, 4-in. Snap-Coupler plow, a 9-ft. SnapCoupler disk, and a model WD 2-row cultivator to go with the WD-45. still own the cultivator and tractor. In the 41 years this tractor has been in our family it has never had a major breakdown, It has been overhauled twice but has never let us down during a busy planting or harvest season. It doesn't have an hour meter but I'd estimate it has over 15,000 hours - and still counting. “My 1981 Allis-Chalmers 185 tractor is also a best buy. The only major repair was to replace the water pump last year, It's fun to drive and easy to maintain, use it to pull a 15-ft. disk and a chisel plow. We pull the chisel plow 15 to [8 in. deep and go 5 to § 1/2 mph. I've also used it to do a lot of other tasks with no problems,”
Allis-Chalmers 2-WD tractor
1 Best Buy0 Worst Buys“My best buy is a little 6070 Allis Chalmers 2-WD tractor. It turns exceptionally short and has a nice operator console. Very easy on fuel. It was the last true Allis tractor.”
Allis-Chalmers 5015 4-WD compact tractor equipped
1 Best Buy0 Worst Buys“Our 1984 Allis Chalmers 5015 4-WD compact tractor equipped with a 3-cyl. diesel engine is a real workhorse. It’s actually an imported Japanese-built Hinomoto tractor that we bought used. The company manufactured under their own brand as well as for international companies including Allis Chalmers. The only problem is that parts are very scarce and, if available, extremely expensive. For example, a single piston sells for $300.”
Allis-Chalmers 5020 tractor
1 Best Buy0 Worst Buys“A few years back, I purchased a used Allis Chalmers 5020 tractor. It always starts and runs fine. It just needs a front drive shaft and cover.
“In late 2021, I purchased a new Bobcat S66 skid steer. With the heat and A/C in the enclosed cab, it’s great to run in all weather. It’s a great compliment to my 1995 751 Bobcat.
“I bought some paint off eBay from Paint For Cars - acrylic enamel with reducer and hardener. The paint went on fine over the primed and sealed surface. Over the winter, it started to blister and peel. Anywhere the sun and weather doesn’t hit it, the paint is fine. Everywhere else, it looks like crap. Nothing more from them.”
Allis-Chalmers 6060 tractor
1 Best Buy0 Worst Buys“I use my 1984 Allis Chalmers 6060 tractor with a 60 hp diesel engine to do haying work. It does a good job with our haybine and also with our big round baler. However, I wish it shifted easier. I also wish it had a swivel seat so it would be easier to look back.”
Allis-Chalmers 6070 2-WD tractor
1 Best Buy0 Worst Buys“My 1985 Allis Chalmers 6070 2-WD tractor starts every time and is fuel efficient. It has about 2,000 hours on it.”
On the minus side, he lists his 2002 Chevrolet Trail Blazer. “It has only about 60,000 miles on it, but already I’ve replaced an air conditioner, alternator, power steering pump, rear brakes, and a 4-WD selector switch. Also, the rear window leaks.”
Allis-Chalmers 7010
1 Best Buy0 Worst Buys“It’s the best tractor I ever owned,” says Chuck about his 1980 Allis-Chalmers 7010. “It has 3,610 hours on it and has required only minor repairs. It offers excellent fuel economy. It’s well-built and handles well. It requires very little maintenance. We had a 1980 7045 that was just as good.”
His only complaint: “The cab could have been a little larger.”
Allis-Chalmers 7045
1 Best Buy0 Worst BuysWendell Suelter, Lincoln, Kan.: “My 1979 Allis Chalmers 7045 tractor has performed well above expectations. Excellent lugging ability and handles well. “Lcan’tsay enough good things aboutmy 1991 Dew Eze flatbed. We use it to haul round bales and doa lotof other jobs. It's the most valuable tool on our farm, “My 1991 New Holland 855 round baler is the most underated baler on the market. A 10-year-old child could operate it.” On the minus side, Wendell lists his 1989 Hesston 5585 round baler. “It spent as much time in the shop as it did in the field. The pickup attachment was a disaster, The bearing lock collars weren’tsettightenough at the factory and belts were poor quality. It wasn’t a dependable machine. “My 1989 Ford F-250 4-WD pickup equipped with a diesel engine has been a nightmare. Almost every part on it, except “Tt's one of the most underated balers on the market. A 10-year-old could operate it.” for the engine, failed before it even had 100,000 miles. I bought it used with no warranty coverage. I'll never buy another used pickup again, partly because I don’t want to go without a factory warranty.”
Allis-Chalmers 7050 tractor
1 Best Buy0 Worst Buys“I’ve had numerous best buys over the years including Stihl chainsaws, Dodge pickups and a 1974 Allis Chalmers 7050 tractor. But my best buy ever was my 2013 May Wes Stalk Stompers that we mounted on our New Holland 98D corn head (www.maywes.com; ph 800 788-6483). The first thing we noticed was the lack of a crunching noise while driving our tractor and grain cart across the rows. Also, there were no more flat or pockmarked tires on the tractor.
“When installing the Stalk Stompers I messed up installing a grease zerk in the pivot bolt. When I called the company, the lady who answered said I wasn’t the first person to have this problem and that she would send two new bolts right away. The bolts arrived two days later, at no charge. Not only did the company not charge me for my mistake, they also didn’t claim I was the first person to ever have this problem. I can’t remember that ever happening before. Stalk Stompers are a superior product, and the company offers superior customer service.”
Allis-Chalmers 7080
0 Best Buys1 Worst BuyGeorge Yates, Somerset, Wis.: George likes his 1987 New Holland 116 mower conditioner equipped with two 8-fL sickles, “We've used it to cut over 2,000 acres. It does a good job of cutting and makes a good windrow in short hay. However, it docs have a problem with overlap sections that wear out and come loose.” A 1978 Allis-Chalmers 7080 tractor, bought used, rates as a “worst buy.” “It has a good engine, but shifting is done with cables which tend to bind. We finally bought afloor shift for itand that helped, The clutch was a problem, and we had trouble with transmission gears. When we did use it in the field, the cab was uncomfortable. This tractor is for sale.” He’s also unhappy with his 1988 Volkswagen Fox station wagon. “AsI drove it home from the dealer, the lights on the right hand side quit working. A dealer 50 miles away fixed it, but I had to have someone drive me home. Then the passenger door handle pulled off. Also, struts on the rear tail door wouldn't hold the door open and the latch wouldn't always latch. A dealerfixed everything under warranty. Now the car runs and handles well.”
Allis-Chalmers 720 yard tractor
1 Best Buy0 Worst Buys“I’m 80 years old and have been retired for 17 years, so I haven’t bought any major equipment lately. However, we still live on the farm and have saved several items from the good old days. All of these machines continue to serve us well, and in addition they keep a lot of good memories alive. Once upon a time, they were all best buys.
“The machines include a Grasshopper mower with an 18 hp Briggs & Stratton gas engine; an Allis Chalmers 720 yard tractor with a 20 hp Onan engine; a Miller portable welder; and a series of Bobcat skid steer loaders, each one better than its predecessor. The newestone is a 742 model. We’ve also saved several tractors - a 1958 Case 900 B, a 1949 unstyled AR Deere, a 1946 Farmall H, and my favorite, a 1949 Oliver 88. It was ahead of its time and was equipped with live hydraulics, pto, and a smooth 6-cylinder engine. I added a homemade 3-pt. hitch to make it even more useful.”
Allis-Chalmers 7580 4-WD tractor
1 Best Buy0 Worst BuysA 1975 Allis Chalmers 7580 4-WD tractor rates as Rocky’s “best buy”. “I bought this tractor with 800 hours on it in 1999 for $9,000 from an Allis Chalmers dealer. It now has more than 4,300 hours. I haven’t had to do anything to it. It’ll pull 25-ft. implements just fine and is also easy on fuel. I farm only 300 acres – this tractor gets my work done fast.”
Allis-Chalmers 782
1 Best Buy0 Worst BuysDuane Forslund, Hawarden, Iowa: Duane likes his Allis-Chalmers 782 chopper. “Excellent reliability, low maintenace cost, good performance and capacity.” Leland Klinger, Pecatonica, Ill; Leland has had bad luck with his 1986 Ford F1504-WD pickup. “Once you start it, it dies three or four times before you can even move it unless you hold the throttle half open. It’s totally dead going uphill and has no power atall. The XL trim fell off before the pickup had 3,000 miles. The dealer replaced it but the new trim also fell off, It gets only 8 mpg. I bet I' ve been to the dealer 20 times to solve the problem, but so far all they’ ve done is set the timing. asked them to look at the transmission, which slips constantly, and install a new carburetor, but they did nothing except wait for the guarantee to run out and it did. put on 5,000 of the first 6,000 miles going to the dealer - 60 miles round trip.”
Allis-Chalmers 8030 front wheel assist
1 Best Buy0 Worst Buys“My 1985 Allis Chalmers 8030 front wheel assist tractor has a lot of power, turns short, and is comfortable to operate. The cab is easy to get in and out of and has better visibility than the cabs on most other big name tractors.”
Allis-Chalmers 8050
1 Best Buy0 Worst BuysRoger Zylstra, Kellogg, Iowa: Roger nominates his 1984 Allis-Chalmers 8050 tractor equipped with front wheel assist and powershift transmission as his “best buy”. “T bought it used in 1992 and it has performed well. I was really impressed with its ability under last year’s wet conditions to do field work and pull my forage harvester.”
Allis-Chalmers 8060
0 Best Buys1 Worst BuyHarry N. Boger, Hartline, Wash.: “My 1992 Deere 4455 wactor equipped with a loader has good traction because it's 4-WD and does a lot of fieldwork. It’s easy riding. “My 1986 Allis-Chalmers 8060 tractor is a worst buy. The clutch has had to be replaced four times or about every 200 hours. The dealer paid for the first one, but I had to pay for the other three.”
Allis-Chalmers 8070
1 Best Buy0 Worst BuysFred Eggers, Brooklyn, Conn.: A 1985 Allis-Chalmers 8070 front wheel assist tractor rates as Fred’s “best buy”. “It’s been an excellent tractor. I bought it with about 2,500 hours. I spent only about half as much as I would have on a Deere and it’s a better tractor.”
Allis-Chalmers 916-H garden tractor
1 Best Buy0 Worst BuysElfie’s happy with a 1984 Allis Chalmers 916-H garden tractor. “I use it to mow my yard as well as our tractor club’s show grounds. I also use it to groom trails in our woods, and during the winter I use it with a snowblower. This tractor has served me well.”
Allis-Chalmers 919 garden tractor
1 Best Buy0 Worst BuysMichael likes his 1984 Allis Chalmers 919 garden tractor that he bought used with about 1,100 hrs. “This tractor now has about 1,755 hrs. with few repairs. I use it every year to rototill 10 to 30 gardens and yards in my area. It’s equipped with a Kohler 19 hp engine, which has plenty of power. The entire machine is built heavy.”
Allis-Chalmers 920 lawn mower
0 Best Buys1 Worst BuyClarence Rupel, Elida, Ohio: Clarence has had trouble with his Allis-Chalmers 920 lawn mower. “It’s equipped with a Lombardini engine. The Spanish-made voltage regulator cost $167 to replace and the German-made starter cost $400 to replace.”
Allis-Chalmers B-1 garden tractor
1 Best Buy0 Worst Buys“My 2003 Kioti CK20 HST tractor equipped with a front-end loader and backhoe is my best buy. It’s a great machine. I especially like the backhoe, which comes off in only two minutes and goes on in just five minutes without tools.
“My 1961 Allis Chalmers B-1 garden tractor has required only routine maintenance. I still use it every week to mow our lawn. My parents bought this tractor new for $725 equipped with electric start. When the second mower deck rusted out 15 years ago, they wanted $900 for a new mower. Instead, I bought a good used deck for $100 and rebuilt it. As long as we can get parts for this tractor, my son will be able to pass it on to his son, and he can use it, too.”
Allis-Chalmers B10 garden tractor
1 Best Buy0 Worst Buys“The 1966 Allis Chalmers B10 garden tractor I bought used last year for $250 equipped with a 42-in. mower deck is my best buy. I call it my ‘Little Allis’. Mechanically, the tractor was in good shape when I bought it. I replaced the points, plugs, and starter generator, changed the fluids, repainted the tractor, added stickers, installed new blades on the deck and added new tires and a new seat. The rear tires are 10 1/2 in. wide, which helps reduce wheel ruts. The tractor still has the original 10 hp Briggs & Stratton 1-cyl. engine.”
Allis-Chalmers B-12 garden tractor
1 Best Buy0 Worst Buys“The Allis Chalmers B-12 garden tractor I bought used about 32 years ago is my best buy. I don’t know exactly how old it is. I use it every spring to till my garden and every winter to clean my driveway, as well as my neighbors’ driveways. I also use it to mow my lawn every week, and my children made spending money using it to mow lawns for widows. This tractor may be sick and tired, but it still does the job.”
Allis-Chalmers D117 Series IV tractor except
1 Best Buy0 Worst BuysGalen says he’s generally satisfied with his Allis Chalmers D117 Series IV tractor “except for the brakes and the difficulty of installing new brake linings.”
Allis-Chalmers D14
1 Best Buy0 Worst Buys“Our 1990 Deere 170 lawn mower works great. Our New Holland 630 4 by 4 round baler is a best buy. Our late model Allis Chalmers D14 is an outstanding tractor.”
Allis-Chalmers D-170
1 Best Buy0 Worst BuysJoseph Waskiewicz, Amherst, Ma.: “The Allis-Chalmers D-170 we bought new in 1965 is my best buy because it’s been so dependable. We had to have a major overhaul done in 1975 but now, 20 years and over 12,000 hours later, it’s still running like a top. I'd buy another one if the company still made them or if I could find one at an auction sale, “My 1989 Chevrolet C-10 2-WD pickup is my worst buy. Just about everything except the engine had to be replaced, including ball joints, distributor, and 4-speed automatic transmission. Luckily, a very good Chevy dealer took care of most of the problems, but I don’t know that I'd ever buy another Chevy pickup.”
Allis-Chalmers G tractor
1 Best Buy0 Worst Buys“My 1948 Allis Chalmers G tractor is my best buy. I bought it from my brother in 1980. I’ve used this little tractor to mow hay and brush, as well as to plow and cultivate. It has been used in some places where other 4-wheeled tractors couldn’t go - up steep mountain sides to a garden, and down steep hills and banks to a small bottom land garden that required winching the tractor back up to the top again. It has the same rear tires my dad put on it in 1966. It’s a dependable tractor.”
Allis-Chalmers Gleaner F2 corn
1 Best Buy0 Worst BuysSteve likes his 1980 Allis Chalmers Gleaner F2 “corn and soybean special” combine. “It’s very smooth and operator-friendly. It does a good job as well as being economical to operate. For a combine its size it has a lot of capacity.”
Allis-Chalmers L2 combine
1 Best Buy0 Worst BuysLewis J. Bugna, Elgin, Ill.: He's impressed with Craftsman hand tools. “I bought my first 1/2-in, drive Crafisman ratchet 37 years ago for $3.25. I wore out two of them and now am on my third model. They're unconditionally guaranteed for life.” Rudolph B, Wellnitz, Cranbury, N.J.: He nominates his 1991 Westfield 7-in. dia., 51-ft. long pto drive auger as his “best buy”. “It’s well built, simple to set up, and trouble free. The flighting design reduces grain damage, especially to soybeans, “T had to buy a new radiator core for my Allis Chalmers L2 combine. The radiator cooling fins are sized differently on front and back which prevents chaff from passing through. I have to wash out the cooling fins about once an hour on hot days, The core cost $1,200. The dealer wouldn't take the old core back or admit there was a problem.”
Allis-Chalmers M2 combine
0 Best Buys1 Worst Buy“Our best buy is our 1970 Deere 4020 tractor. It has more than 7,000 hours on it yet the engine has never been touched. The clutch was adjusted once. It just keeps on running good year after year. “Our 1982 Allis-Chalmers M2 combine is one of our worst buys ever. The heater never has worked right and the air conditioner works for only about an hour at a time. It seems to stop working as soon as the service man is out of sight. I call this combine our ‘Choke-Up King’ because it plugs up so easily, even if we’re going only 3 mph in 12 to 15 bu. per acre soybeans. I’ve worked for hours at a time trying to unplug this big, lemon monster. Another problem is that it’s almost impossible to put fluid into the brake cylinder.”
Allis-Chalmers WC tractor
1 Best Buy0 Worst Buys“Three or four days before Pearl Harbor I bought a new Allis Chalmers WC tractor. It’s always been a best buy. When the dealer hauled the tractor to my place a week or so later he told me that if he had waited a week he could have sold the tractor for more than $1,000 over what I paid for it. It got me through World War II in good shape.”
Allis-Chalmers XT190 tractor
1 Best Buy0 Worst Buys“It’s the best tractor I’ve ever owned,” says Ed, pleased with his 1980 Deere 4840 2-WD tractor equipped with 23 by 38 dual wheels. “The engine had more than 10,000 hours before it had to be overhauled. We updated it to 4850-style sleeves and pistons in order to get better fuel economy and extra power. The powershift transmission was overhauled at 11,000 hours. I didn’t make even one trip to the dealer before those repairs. It’s an excellent, clean tractor and doesn’t leak oil anywhere. I never bought any accessories for this tractor because it didn’t need any. It has a good lighting setup, and the batteries are well located.
“The view from the cab is good on both sides, but the exhaust pipe and air cleaner do block the front view considerably. The cab is equipped with a hydraulic-operated seat, which I really enjoy. I haven’t modified this tractor in any way. With new tires, a new engine, and a new power shift assembly, this will be my last tractor in my farming career. Because it took 24 years before this tractor needed repairs of any kind, I don’t expect to have to work on it again for a long time.
“My 1969 Allis Chalmers XT190 tractor isn’t green, but it sure stands up to Deere’s long green line as far as quality and durability are concerned. It was my main tractor when I bought it new in 1970. At the time, there wasn’t a better tractor anywhere in its category other than the rugged 4010 and 4020, which cost considerably more. It has a lot of power and still doesn’t leak any oil even though I’ve always worked it hard. It has a large roomy cab with a good view. This tractor has a super high-low dual shift transmission that can be shifted any time on-the-go. It shifts smooth, with no clashing of gears. I haven’t had any problems with the transmission to this day.”
Allis-Chalmers equipment
1 Best Buy0 Worst BuysOver the years Marcus has had a lot of success with Allis Chalmers equipment. “We’re still using our 1936 Allis Chalmers WC tractor equipped with 12-ply road grader tires for bush hogging and raking hay. We use our 1951 Allis Chalmers WD tractor for mowing and also for making hay with our 1968 Allis Chalmers 303 square baler. We use our 1974 Allis Chalmers 200 tractor for heavy work and for making hay with our Vermeer 605H round baler. We use our 1968 Allis Chalmers I600 backhoe for handling big bales and dirt work.”
Allis-Chalmers tractors ever
1 Best Buy0 Worst BuysEugene has owned Allis Chalmers tractors ever since 1956 and says they’re all “best buys”. “Over the years I’ve farmed with nine different Allis Chalmers models. My favorite was the 190. All of these tractors have a lot of power and traction and are easy to work on. We’ve also used International Harvester Farmalls and they worked good, too, but in my opinion nothing beats Allis Chalmers.”
Allis-Chalmers man
1 Best Buy0 Worst Buys“It’s not the color that counts, it’s what’s under it that counts,” says Charles, who nevertheless says he’s an Allis Chalmers man. He’s especially happy with his 1939 Allis WC tractor equipped with a 14 hp engine. “It had a list price of $960. We’ve used it for all of its 61 years and it still works good. We also own an Allis Chalmers WD, WD 45, 160, 170, and 200. I’m 80 years old. My son and I use these tractors to bale 1,300 bales every year from spring until fall. We don’t ever change implements, we just change tractors with hardly any down time. I’m sold on Allis-Chalmers.”
Allis-Chalmers models
1 Best Buy0 Worst BuysJames nominates several tractors as his “best buys”. They include three 1976 Versatile 750’s; three International models including a 1948 H, 1950 M, and 1959 560; and two 1976 Allis-Chalmers models - a 7040 and a 7060. “No major problems with any of them.”
Allis-Chalmers semi-mounted auto reset
1 Best Buy0 Worst BuysMerlin Atwell, Remsen, N.Y.: Merlin’s “worst buy” is his 1990 Deere 2000 semimounted, 4-bottom 18-in. plow. “It’s not built with the quality of Deere’s other products. It doesn’t even perform as well as our 20-year-old Allis-Chalmers semi-mounted auto reset plows. The bolts wear through the points and land sides because there’s not enough taper on them. Three of the moldboards have cracks in them around the front mounting bolts, and the shear bolts continually break from coulter tension. Our dealer has done nothing to help.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.