Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Allis-Chalmers › 190 XT

Allis-Chalmers 190 XT tractor

What FARM SHOW readers say · 4 Best Buys0 Worst Buys · Tractors

Allis-Chalmers 190 XT tractor

4 Best Buys0 Worst Buys
Best Buy
Shauna and Brent Sereda, Thorsby, Alberta · Vol. 29, No. 3 (2005), p. 13

“My husband likes his Allis Chalmers 190 XT tractor. It was his first major tractor purchase when he started farming,” says Shauna. “This tractor is easy to shift, and the cab has good visibility. We installed speakers and a cassette-radio in the cab. It’s a nice tractor.”

A 1998 Homelite Weedeater with 17 in. of cutting capacity rates as their “worst buy”. “It worked well only for one summer. Then, even though it was stored in a dry shed, the primer bubble cracked and had to be replaced. The set screws to adjust the carburetor had plastic tops, which stripped after only a few adjustments were made. The slip clutch seized a few times even though it was kept dry. The fuel line was replaced twice as it, too, kept cracking. We’re tired of fixing this tool every time we want to use it. It was officially retired last summer by a second hand Ryobi that looks the worse for wear, but actually works. The Homelite was pampered and looks like new, but it was junk.”

Best Buy
Walter Wilkens, Albert City, Iowa · Vol. 23, No. 4 (1999), p. 17

“I’m retired now but when I farmed I really liked my 1977 Deere 4430. It was very reliable and on a per-acre basis was the cheapest running tractor I ever owned. Very quiet and smooth running. The only problem I ever had was when the high-low powershift clutch went out at about 5,000 hours. Apparently it was a factory defect. As far as handling goes this tractor even beat my 1970 Deere 4020. It was rated at 125 hp but easily put out 140 hp - without any modifications. It had a weak hydraulic system on the hitch and the remote cylinders. I understand this was a problem on all the 4430s. The 4020’s hydraulics were much better. The original lights were pitifully weak so I added some more. I also installed front fenders to keep gravel from hitting the windshield and to improve the tractor’s looks.”

“I wasn’t as satisfied with my 1980 Allis-Chalmers 185. It had way too much downtime. The oil cooler sprang a leak and oil got all over everything. The left rear seal went out. The float on the fuel gauge was made of plastic which dissolved and kept plugging the fuel system. I finally replaced it with a brass one. The injection pump jumped out of time and the dealer couldn’t fix it. The air conditioner thermostat never lasted more than a couple of months so I finally replaced it with another brand which worked. The tractor had plenty of power for its size but had a noisy engine. Fuel economy was only fair. The tractor was hard to shift without clashing gears. The power steering was nearly nonexistant under 1,800 rpm’s, which meant that I had to ride the hand clutch when turning while cultivating or planting. It did have a good hydraulic system.“ owner of a 1976 Allis-Chalmers 7040 equipped with a power shift transmission. “The transmission doesn’t have enough different field speeds and the tractor is hard to start when the weather is cool. Otherwise it’s a good tractor.

“My 1969 Allis-Chalmers 190 XT equipped with a 95 hp diesel engine has a lot of power and starts good. It’s also economical to operate.”

Best Buy
Joe Torkelson, Hiawatha, Kan. · Vol. 23, No. 4 (1999), p. 17

Joe’s the owner of a 1976 Allis-Chalmers 7040 equipped with a power shift transmission. “The transmission doesn’t have enough different field speeds and the tractor is hard to start when the weather is cool. Otherwise it’s a good tractor.

“My 1969 Allis-Chalmers 190 XT equipped with a 95 hp diesel engine has a lot of power and starts good. It’s also economical to operate.”

Best Buy
Springs, Miss. · Vol. 23, No. 4 (1999), p. 17

“We bought our Allis-Chalmers 190 XT used several years ago. Considering its age, it does an acceptable job. We had a welding shop fabricate a cover steel over the driver’s seat. For a while we used a canvas canopy but a windstorm tore it off.”

Own a Allis-Chalmers? Tell FARM SHOW how it’s held up.

Your report could appear in a future issue.

Send your Best or Worst Buy

More Allis-Chalmers products

Allis-Chalmers WD tractor 6 best · 0 worstAllis-Chalmers WD45 tractor 8 best · 0 worstAllis-Chalmers 7020 1 best · 1 worstAllis-Chalmers 160 tractor 3 best · 0 worstAllis-Chalmers B tractor 4 best · 0 worstAllis-Chalmers D17 tractors work great 5 best · 0 worstAllis-Chalmers 185 tractor 7 best · 2 worstAllis-Chalmers 7000 tractor 3 best · 0 worstAllis-Chalmers D15 tractor equipped 2 best · 0 worstAllis-Chalmers 6080 tractor 3 best · 1 worstAllis-Chalmers tractors 2 best · 0 worstAllis-Chalmers 7040 tractor 2 best · 1 worstAllis-Chalmers 200 tractor 1 best · 1 worstAllis-Chalmers 5050 diesel 1 best · 1 worst

See all Allis-Chalmers reports →