Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Brands › Makita

Makita: what farmers say

124 reports in FARM SHOW · 108 Best Buys16 Worst Buys

Makita (general)

18 Best Buys2 Worst Buys
Feature storyBest Buy
Wendy Wellnitz, La Crescent, Minn. · Vol. 47, No. 4 (2023), p. 15 · Full story at FARM SHOW →

“My cordless, power-assist wheelbarrow from Makita was a real find. I picked it up used for only $200 (tool only).”

Read the whole story →
Feature storyBest Buy
Jim Ruen, La Crescent, Minn. · Vol. 46, No. 5 (2022), p. 15 · Full story at FARM SHOW →

“I really like the 18V LXT Couple Power Shaft from Makita. I got the kit with string trimmer and hedge trimmer attachments, as well as the pole saw.”

Read the whole story →
Feature storyBest Buy
Jim Ruen, La Crescent, Minn. · Vol. 46, No. 4 (2022), p. 13 · Full story at FARM SHOW →

“The DMP 18-volt cordless inflator from Makita is a compact design and handy to use. “The inflator weighs only 6 lbs. with a 5 aH battery and costs $159 for the bare tool.”

Read the whole story →
Feature storyBest Buy
Jim Ruen, La Crescent, Minn · Vol. 45, No. 4 (2021), p. 14 · Full story at FARM SHOW →

“The new 40-volt impact driver and 40-volt hammer driver drill from Makita have more functions and control options than I know what to do with.”

Read the whole story →
Best Buy
Jim Ruen, La Crescent, Minn. · Vol. 45, No. 1 (2021), p. 15

“When I received a news release on Makita’s new XLT XRU16 cordless brush cutter, I was intrigued. I ’m a big fan of how the company uses the same batteries for all of its 270 plus cordless tools.

“When the company sent me the Cordless Brush Cutter to use, it included a 9-in., star blade with 4 teeth and the brush cutter harness. However, both the box and the manual referred to the tool as a Cordless Grass Trimmer. Even more confusing was the warning label on the blade: Use this blade for grass cutting only.

“I contacted the company to ask about the warning labels. When no answers came, I went ahead and attacked tall grasses, heavy weeds and light brush with the ‘for grass cutting only’ blade.

“As a light brush cutter, the XRU16 easily walked through heavy weeds and grasses and chopped its way through woody stems. It handled everything my old Stihl trimmer with a circle saw blade could.

“It chewed into and through clusters of woody honeysuckle up to 1 in. in diameter. Old, woody gooseberry and raspberry canes were no challenge. Likewise, the 4-tooth blade had no real problem with box elder stems and even clipped off volunteer black walnut stems that were about an inch in diameter.

“It didn’t wrap up weeds or grasses so I didn’t have to use the nifty reverse feature, but it was nice to know it was there. I did very much appreciate the 3 speeds offered and the power produced.

“Occasionally the motor would stop on a larger stem, but it restarted immediately with no noticeable problem.

“According to Makita, the 36-volt brushless motor, powered by two 18-volt batteries, produces power equal to Makita’s 30cc gas motors with all the benefits of cordless.

“Control is an important feature of the grass trimmer/brush cutter. I like the handlebars and quick-release harness. They give arm, shoulder and back muscles a real break and make the cutting action easy to control. Casting the cutting head back and forth in wide swathes is smooth and easy with those features.”

Best Buy
Jim Ruen, La Crescent, Minn. · Vol. 43, No. 5 (2019), p. 13

“The cordless, portable metal band saw from Makita was a great addition to my shop. While I have multiple metal cutting tools, both corded and cordless, this little band saw beats them all for anything under 2 1/2 in. It is smoother than a reciprocating saw without the noise or sparks of an angle grinder. It also leaves a smaller kerf.

“When I first got it, I put it through its paces, cutting a wide variety of materials. It sliced through pipes, conduits, tube steel and rebar, stuff that I’m likely to cut on a regular basis. It even sliced a chunk off a 1/4-in. thick I-beam. Pvc and softer metal were even easier. The 630-ft./min. blade speed makes quick work of most steel.

“One use that I really appreciated was cutting old steel used in a concrete foundation that I was breaking up. I was able to get within a couple of inches of the chunk of concrete and slice off the rusty square tubing.

“The adjustable stopper plate makes it easy to line up the tool with the object being cut and helps ensure a straight cut. While knurled bolts would make it easier to adjust the plate, the hex-wrench needed is secured on the body of the saw.

“Changing out the saw blades is easy, but expensive, at 5 blades for around $49 for Makita replacements.

“Properly adjusting the blade track with the previously mentioned hex-wrench is vital. Other than blade adjustment, no tools are needed for blade change.

“Like the other 200 Makita cordless tools, the metal band saw is powered by an 18-volt lithium ion battery.

“With so many tools coming in plastic housing, the aluminum housing is appreciated.

“Like most cordless tools, the price isn’t bad if you already have a battery and charger. Bare tools go for around $240, while the full kit can be had for around $411 on Amazon. com.”

Best Buy
Robert Troxel, Mt. Vernon, Mo · Vol. 19, No. 1 (1995), p. 15

Robert Troxel, Mt. Vernon, Mo.: “My best buy recently is a Jamestown wood pellet-burning stove I bought from Pennington Seed Co. in Greenfield, Mo. They're a distributor for the stoves and they make pellets from pure oak sawdust. I bought the stove after had a severe heart attack and could no longer cut wood to fire my Bryan outdoor wood furnace. The stove makes nice even heat without all the fuss and muss of wood. “My worst buy in the last two years is a set of Black & Decker cut-off wheels for my chop or cut-off saw. They wore down real fast and several were out of balance from the beginning. So I went back to Makita brand wheels - more expensive but built to last.”

Best Buy
Jacques R. Tetreault, Tilbury, Ontario · Vol. 18, No. 6 (1994), p. 15

Jacques R. Tetreault, Tilbury, Ontario: “I nominate FARM SHOW as my best buy, L also like Makita power shop tools and our 1967 Oliver Super 66 tractor. It still runs like a top.”

Best Buy
Gerald Grant, Nevada, Iowa · Vol. 18, No. 4 (1994), p. 16

Gerald Grant, Nevada, Iowa: Gerald’s impressed with his 1991 Deere 875 12-row, 30-in. high residue row crop cultivator. “It’s well built and can handle a lot of trash and stays in the ground regardless of how hard the ground is. We're pretty much Case-IH customers. We bought this cultivator because our local Case-IH dealer couldn't get acultivator that we had ordered seven months earlier and we needed it. We couldn't be happier with it. “Sears Craftsman electric-powered shop tools have lost some of their quality. For example, on drills the chucks slip and won’t hold bits, switches fail, and the motors burn out. We’ve started buying Makita electric hand tools.”

Worst Buy
Glen Mitchell, Moss Bank, Sask. · Vol. 13, No. 3 (1989), p. 12

Glen Mitchell, Moss Bank, Sask.: “Glen’s “worst buy” is his 1988 Makita rechargeable drill. “It took two months and three new chargers before we got a drill to work,” On the positive side, Glen is pleased with his 1988 Ford F-150 XLT pickup equipped with a standard 4-speed transmission and automatic overdrive. “The V-6 engine has twice as much power as V-8 engines, and the seat is the most comfortable one on the market.”

Best Buy
Gordon H. Gardiner, Regina, Sask. · Vol. 12, No. 4 (1988), p. 13

Gordon H. Gardiner, Regina, Sask.: “My Makita cordless drill is convenient to use and has lots of power. Recharges quickly.”

Best Buy
Gordon Warren, Wilmington, Ohio · Vol. 12, No. 4 (1988), p. 13

Gordon Warren, Wilmington, Ohio: “My best buys are Makita power tools including arouter, hand plane, palm sander, and power water stone blade sharpener. They all perform well and require no maintenance. “Another good buy is my 1986 GMC short bed pickup with a 5-speed transmission. It drives like a sports car.”

Best Buy
William A. Munson, Utica, IIL · Vol. 12, No. 3 (1988), p. 13

William A. Munson, Utica, II: He’s happy with his 1987 Makita cordless clectric drill. “It’s small, lightweight and powerful. The battery recharges quickly and the level on top is convenient for drilling pilot holes for hinges and doing other jobs in and around feedlots and other isolated locations.”

Best Buy
Dean Fitzsimmons, Redfield, Kan. · Vol. 11, No. 1 (1987), p. 13

Dean Fitzsimmons, Redfield, Kan.: He cites his Makita cut-off saw as “best buy”. “With its adjustable vice, it works great to make angle cuts." He nominates his 1986 GMC 1/2ton pickup as “worst buy”’. ‘‘It’s my last GMC. Gas mileage is very poor and it has an engine rattle that no one “Gas mileage is very poor and it has an engine rattle that no one can locate.” can locate. Dealer did what he could but the factory wouldn't help.”

Best Buy
John Haak, Winfred, S, Dak. · Vol. 10, No. 6 (1986), p. 13

John Haak, Winfred, S, Dak.: ‘My 1986 Case-International 496 FlexWing cushion gang disk is the best piece of equipment I've ever owned. We have rocky fields and usually spend a lot of time replacing blades and bolts. This year we disked over 2,000 acres without a single stop for repairs. “My worst buy Black and Decker %-in, rechargeable drill doesn’t have enough reserve to drill more than 3 or 4, %s-in. holes in wood. | replaced it with a Makita cordless which works great with plenty of power.”

Best Buy
Andrew Gustad, Volin, S. Dak. · Vol. 10, No. 5 (1986), p. 13

Andrew Gustad, Volin, S. Dak.: “Nearly every time I work in the shop I find a use for it cutting rivets or bolts or sharpening something," says Andrew about his ‘best buy” 4-in. Makita hand-grinder.

Best Buy
Aaron Coe, Mt. Pleasant, Iowa · Vol. 8, No. 1 (1984), p. 11

Aaron Coe, Mt. Pleasant, Iowa: ‘'! own both a farm and a construction business. My little Ford 1900 4-WD diesel works great as a chore tractor, even hauling grain wagons in from the field. can use it all day and only consume 3.6 gal. of diesel while plowing all the gardens in town with a 2-bottom plow. In construction, I have used it to grade the job site as well as seed the lot, It brings praises from customers and neighbors on every job site. The light weight combined with the low center of gravity has allowed me to use this tractor in many back saving ways.” Aaron's “worst buy” is a Rockwell ¥-in. heavy duty hammer drill. “I use this drill primarily to drill concrete. I drilled three holes with it and the nylon gears simply wouldn't hold up. The company repaired the drill and I tried again. This time I drilled nine holes before it again broke down. To finish the job, I bought a Makita ¥2-in. hammer drill. The Makita is fantastic. It's such a pleasure to havea good and reliable tool, that I never even repaired the Rockwell drill."

Best Buy
Dennis Esslinger, Bern, Kan · Vol. 6, No. 4 (1982), p. 12

Dennis Esslinger, Bern, Kan: “This grinder has the performance of a 7-in. grinder but is small and easy to handle,” says Dennis, pleased with his 4-in. portable grinder made by LaGrange Manufacturing, Omaha, Neb. The stones are exceptionally hard and don't wear down very fast. I have equipped this grinder with cut off blades so I don't need a cutoff saw. It has plenty of power.” On the minus side, Dennis had trouble with his Makita portable grinder. “It had no power and the wheels wore down too fast. You couldn't bear down on it and expect to get anything done, had it only a short time when I sold it and bought the La Grange. “I would also like to nominate best farm paper I receive. It has saved me thousands of dollars in machinery purchases. I read it from front to back. “Another good purchase is a tire It's made by the Nealey Company of Des Moines, Iowa. The kit, for 4-ply tires, costs just $8.95 for 12 repairs. In town they charge $5.00 or more to fix one leak, I repaired one tire a year ago and have never had a leak since. have trouble keeping kits on hand, though, as neighbors keep buying the extra ones keep in my pickup. You don't have to remove the tire to patch leaks with the kit."

Best Buy
K. Joe Kinnie, Julesburg, Colo · Vol. 6, No. 3 (1982), p. 11

K. Joe Kinnie, Julesburg, Colo: ‘I have never used a product that cost me so much,” says Joe, upset with Dual herbicide by Ciba-Geigy. ‘‘We were having trouble with foxtail on a couple hundred acres of corn ground. After considering many herbicides, we chose Dual for several reasons. 1. Ciba-Geigy claimed Dual will work by itself without another mixed-in herbicide. 2. Dual was said to work exceptionally well on foxtail. 3. We were told Dual would stay in the soil longer than competitive herbicides and thus would be there to take care of weeds that came on later in the season. “Unfortunately, we had foxtail emerge six weeks after planting. Choosing Dual cost us approximately $40,000 or, on the average, 70 to 80 bushels per acre. A Ciba-Geigy representative came out but gave us no satisfaction whatsoever. The fact remains that Dual did not perform. We applied the maximum rate and used the same sprayer as with our other herbicides. Comparing the Dual acres with Lasso and Atrazine acres, it looked as though we hadn't used any herbicide at all.” Oliver Noel, St, Lina, Alberta: ‘No more dependable than a Christmas toy from Asia,” says Oliver, disappointed with his Rockwell 10-in, band saw. “In thicknesses over one inch, the blade cannot be controlled at all. The blades break frequently and alignment cannot be kept permanent. Compared to other saws, it’s junk.” He's pleased, though, with his Makita 2030 12-in. planer/jointer. “We've used it for the past year to finish and shape rough lumber for shop use. It keeps its thickness setting perfect and the motor has been 100% trouble-free.” Oliver runs a new and used tractor parts shop and says he can pick the most popular older tractors by monitoring calls for parts, ‘‘Parts calls indicate to what extent these tractors are still being used. The three most popular at this time are: 1. Case 930. 2. International Harvester 706 and 806. 3. John Deere 4020.”

Worst Buy
Kenneth Bunger, Wellsburg, Iowa · Vol. 4, No. 5 (1980), p. 11

Kenneth Bunger, Wellsburg, Iowa: He nominates a fuel conditioner from Trans World Chemical Co. as his “worst buy". “It plugged the fuel filters and there was no noticeable improvement in performance, as claimed by the salesman." Kenneth's pleased, though, with his Makita model 2412N portable cut-off saw. “It's faster than a band saw and will cut metal that a band saw won't touch,”

Makita angle grinder

9 Best Buys2 Worst Buys
Best Buy
Gerald Lubitz, Perham, Minn. · Vol. 46, No. 2 (2022), p. 14

“In 1982 I bought a 5-in. Makita angle grinder. For many years, it was my only grinder, and the way I weld, it got a workout. My welding hasn’t gotten any better, but I’m pleased to say that grinder is still going strong. With not one issue in 40 years, it’s definitely a ‘best buy’.”

Best Buy
Michael Schiller, Pittsville, Wis. · Vol. 46, No. 1 (2022), p. 12

“More than 30-years ago I bought a Makita 4-in. angle grinder. It has been used on at least three vehicle overhauls/restorations, cut through numerous boat floors, and cut tons of steel. I’ve replaced the power cord twice, but the little machine keeps on ticking away. By far my ‘best buy’.

“My 2014 Chevy Silverado 1/2-ton has 120,000 miles with only a front-end alignment, tires, regular oil changes, and routine maintenance. It’s a great product.”

Best Buy
Marvin Henry, Maywood, Neb. · Vol. 41, No. 3 (2017), p. 13

“I’m well pleased with my 2014 Ridgid cordless drill and impact driver. It comes with 2 batteries and a charger, and it only takes about 15 min. to recharge the battery so I never have to wait to go back to work. Also, the charge lasts a long time.

“After 20 years I finally had to replace the brushes on my Makita hand grinder. I’ve successfully used this tool with a cheap wire cup brush to scrape old paint off a building before I repainted it. I’ve also used it on iron and to cut off rusted bolts and rivets.

“I had problems raising the deck on my Cub Cadet 1040 riding mower in order to keep it from scalping the grass. Also, the needle valve stuck open and filled the crankcase full of gas. I replaced it with an in-line shut-off valve, which solved the problem.”

Best Buy
Robert Zurfluh, Monticello, Wis. · Vol. 39, No. 3 (2015), p. 13

“More than 20 years ago my dad bought a small Makita angle grinder, and we still use it regularly.

“I like my Schnee’s winter pack boots (www.schnees.com; ph 800 922-1562). I have one pair that’s more than 10 years old. I wear another pair from November through March for working with cattle, logging, hunting and snowmobiling. These boots are warm, dry and long lasting.

“Our 2000 Honda Rancher 350 2-WD 4-wheeler is on its third set of tires. I abuse the heck out of this machine but it keeps right on going. No problems.

“My wife loves her 2011 Speed Queen washing machine (www.speedqueen.com). It has all metal parts and gears instead of the plastic parts found on many other brands, and it’s comparably priced and has a better warranty. Our farm clothes are very hard on washing machines, but we’re happy with this one.

“In 1996 we bought our first new Maytag washing machine. The main bearings on it failed about the same day the warranty expired. A technician fixed the machine, but it broke down again within a year.”

“At one time my uncle used his 1962 Deere 4010 tractor to do all the work on his farm, doing big jobs such as plowing and harvesting. We bought the tractor used from him in 1997 and use it every day on our farm to do smaller jobs such as disking, planting, mulching, raking hay, pulling hay and silage wagons, and operating a round bale processor. The engine was overhauled long ago and the tractor now has about 16,000 hrs. on it. I’ve made a few minor repairs on it and painted it in 2012.”

Worst Buy
Charles Plushanski, Kutztown, Penn. · Vol. 34, No. 6 (2010), p. 14

A Skil 4 1/2-in. angle grinder rates as Charles’s “best buy”. “I bought this grinder after my Makita 4 1/2-in. angle grinder broke and use it all the time.

“The Makita grinder lasted only about three weeks and was my worst buy. I was using it to grind down a part on my manure spreader when the gearing inside the unit broke. I found out later that it was made in China.”

Best Buy
Milton Nesiba, Ravenna, Neb. · Vol. 25, No. 2 (2001), p. 16

“We like the Morton building we put up in 1992.

“Also, our Makita 4-in. grinder is handy to use and built tough and is a best buy.”

Best Buy
Steven Vaadi, Lafargeville, N.Y. · Vol. 24, No. 3 (2000), p. 16

“I like my 1998 Sears 3/8-in., 7.2-volt reversible cordless drill and driver. I also like my 1998 Makita 4-in. electric hand grinder. No problems with either tool.”

Best Buy
Marvin Henry, Maywood, Neb. · Vol. 24, No. 1 (2000), p. 14

“My 10-year-old Makita 5-in. hand grinder works like new and is absolutely trouble-free. It’s small enough to maneuver in close quarters, yet it has enough power to remove material fast when necessary. It does a good job. I use it with a low-cost, softer wire cup brush to scrape or remove old paint. This type of brush works best because it tends to flatten out. I scraped an entire garage in only two hours.

“My best buy of all time was my 1945 Deere A tractor which I bought used in 1975. The only money I’ve spent on it was for paint and tune up parts. It always starts and never gets hot. It’s not a big tractor but it has enough power for my small operation and doesn’t burn oil to this day. I did have to put in a new flywheel seat last spring, but it cost me only about three dollars.

“My Remington chainsaw is my worst buy. I found out that when it needed repair work there was only one place in the entire state where I could get parts for it, and that was a small engine repair shop. It took forever to get it repaired and the parts were very expensive.”

Best Buy
Harry Kruize, Donnelly, Minn. · Vol. 23, No. 6 (1999), p. 14

“My Makita 4-in. angle grinder is a handy tool that has performed well. I use it a lot. It’s my best buy.”

Worst Buy
Ronald J. Fitzgerald, Seeley’s Bay, Ont. · Vol. 23, No. 2 (1999), p. 16

“It makes more even heat and heats the water heater better with no more wood than other wood furnaces with box stoves I’ve used,” says Ronald, pleased with his Cozyburn outdoor wood furnace (Cozyburn Manufacturing Inc., Box 888, Arborg, Manitoba, Canada R0C 0A0; ph 204 364-2318).

On the negative side, he’s unhappy with his Makita 5-in. angle grinder. “The brushes burned out after one year. I replaced them and then the armature failed. This grinder cost $300 and had only a one-year warranty. So I bought a Craftsman for $100 that has a two-year warranty. It works better.”

Best Buy
Paul Hobbs, Kansas City, Mo. · Vol. 16, No. 3 (1992), p. 13

Paul Hobbs, Kansas City, Mo.: “My Makita 4-in, grinder is easy to handle, compact, and has an overload shutoff. It’s a best buy. “My Homelite XL 14-in. chain saw is light and easy to handle. I’ve used it for six years and my only expenses have been fora new filter and new chains. “My Craftsman 3/8-in. electric drill is a worst buy. After I used it about 10 times it started making a howling noise. [ retumed it and got another one, but the same problem happened again.”

Makita 1/2-in impact

6 Best Buys1 Worst Buy
Best Buy
Greg Krush, Hotchkiss, Colo. · Vol. 49, No. 2 (2025), p. 14

“My cordless Makita 1/2-in. impact has lots of power. I haven’t used an air wrench since.”

Best Buy
Eugene Yoder, Goshen, Ind. · Vol. 47, No. 5 (2023), p. 12

“Both my Makita 1/2-in. and 1/4-in. drive impacts work great. The 1/2 in. has a lot of torque, and the 1/4 in. works great on smaller bolts and nuts.”

Worst Buy
Richard Strayer, LaGrange, Ind. · Vol. 25, No. 3 (2001), p. 15

“I like my Lincoln Power Lube 12-volt cordless grease gun which I bought about a year ago. It was a little awkward to use at first but turned out to be real handy once I got used to it. What’s nice is that I don’t need three hands to grease any fittings. I use one hand to hold the gun on the fitting and the other hand to operate the trigger. It’s much more powerful than a hand pump. I had to replace the hose when it broke.

“My 5-year-old Makita 1/2-in. electric drill is my worst buy. The chuck doesn’t work right. I have to use a wrench to move the chuck even when it doesn’t have a bit in it. The hardware store that I bought the drill from sent it back to the company, but they didn’t do much with it. It worked better since I got it back, but still doesn’t work right.”

Best Buy
Robert Anderson, Ballinafad, Ontario · Vol. 14, No. 2 (1990), p. 12

Robert Anderson, Ballinafad, Ontario: “It’s gotabout 200,000 miles with no major repairs,” says Robert, pleased owner of a 1985 Nissan King Cab 2-WD pickup. “It’s the best vehicle I’ve ever driven in the winter and has never failed to start. wouldn't consider replacing it. It has carried everything from hogs to feed to firewood and the bigger the load, the better it does. The engine still gets 30 to 35 mpg and doesn't use oil. When the engine does finally go, I intend to have it rebuilt.” : Adrian’s had good luck with his Makita 1/2-in, 2-speed hammer drill, model HP 1310, “It’s lightweight but powerful enough to drill holes in concrete, and has handy switches forchanging speeds and for switching between forward and reverse.”

Best Buy
Ray Johnson, Moville, Iowa · Vol. 14, No. 2 (1990), p. 12

Ray Johnson, Moville, Iowa: “This tractor has plenty of power and I really like how itshifts,” says Ray, pleased owner of a 1989 Case-IH 7130 Magnum. “It offers easy maintenance, handy controls, convenient electronic 3-pt. control, and the cab is easy to enter and exit.” Ray's “worst buy” is his 1989 Oldsmobile 98 Brougham Regency. “The chrome moldings don’t line up right, the seat pleats are sewn unevenly, the windows don’ tclose tight, and the license plate holder had missee OR Pee sO Adrian’s had good luck with his Makita 1/2-in, 2-speed hammer drill, model HP 1310, “It’s lightweight but powerful enough to drill holes in concrete, and has handy switches forchanging speeds and for switching between forward and reverse.”

Best Buy
Warren S. Purks, Fredericksburg, Va. · Vol. 9, No. 4 (1985), p. 13

Warren S., Purks, Fredericksburg, Va.; "It's ten times faster than an elec- tric hacksaw. Easy to use and is the best tool in my farm shop," reports Warren about his "best buy'' Makita 12-in. Carborundum metal cut-off saw.

Best Buy
Clarence R. Jacobson, Redwood Falls, Minn. · Vol. 8, No. 3 (1984), p. 11

Clarence R. Jacobson, Redwood Falls, Minn.: "We bought it four years ago and we haven't had a tractor dual loosen up since," says Clarence, pleased with his Makita 1/2-in. electric impact wrench.

Best Buy
Dylan Berger, Wasilla, Alaska · Vol. 49, No. 6 (2025), p. 14

“My Great Stuff Pro 14 foam gun is much better than using the spray foam cans alone (www.greatstuff.dupont.com; ph 866-583-2583). The cans last a long time, and you can use the same can for up to a month. Two tricks I’ve learned are to use the tip of a utility knife to make sure the tip of the gun is clear, and to always keep the gun connected to a can of foam or cleaner. If you run out of foam, put a new can on right away.

“My Makita 18-volt oscillating multi-tool has endless uses, such as cleaning off urethane on studs, cutting electrical box holes in drywall, and cutting roots wrapped around a tiller. It’s so handy.”

Best Buy
Johnny Murray, Granite, Okla. · Vol. 49, No. 3 (2025), p. 14

Johnny is the satisfied owner of a Makita 18-volt cordless 3/8 drill with hammer, drill and clutch settings and a 1/4-in. impact screw gun. “These tools and batteries perform well and last years under DIY use. They’ll also do the job under daily contractor use.

“I’ve tried two Rheem small electric tankless water heaters (RTEX-8 and RTEX-11), and neither will furnish hot water. The 8-kW model is purported to furnish two sinks, and the 11-kW model three sinks. Neither will deliver anything but lukewarm water, even when the flow rate is choked down to the limits.”

Best Buy
Jamisen Fox, Pecatonica, Ill. · Vol. 43, No. 6 (2019), p. 14

“It’s amazingly powerful and cuts as fast as my Stihl MS290, yet it weighs only 11 1/2 lbs.,” says Jamisen about his Makita 18-volt cordless LXT brushless chainsaw equipped with a 14-in. bar. “This saw runs quiet and always starts. Makita’s new twin battery series tools use the same batteries found in their 18-volt tools. I like how this saw performs.”

Best Buy
Kenton Mast, Alturas, Calif. · Vol. 41, No. 2 (2017), p. 13

Kenton’s impressed with Makita 18-volt power tools. “We’ve bought dozens of their tools over the last 10 years and they just keep getting better. Unlike a lot of other brands, the company has kept one battery connection style over the years while updating the underlying technologies of their tools. As a result, when we buy new tools and batteries from them we can use the new ones right along with the older ones. We drop these tools, step on them, and sometimes even use them as hammers, but they just keep on working.”

Best Buy
William Miller, West Springfield, Penn. · Vol. 36, No. 3 (2012), p. 12

“I work for American Eagle Windmills, and the Makita 18-volt cordless tools we use on the job work great. We tried using a couple other brands but these tools have more power and are compact, which makes them easy to use in tight spots. It takes only 10 to 12 min. to charge the batteries.

“My Sears Craftsman socket set doesn’t stay organized in its case, and the first time I used it I broke some of the sockets. I have to keep running to the store to replace sockets. These sockets are built with about the same quality as Harbor Freight tools.”

Best Buy
Dwayne Yoder, LaRussell, Mo. · Vol. 35, No. 3 (2011), p. 14

Dwayne’s impressed with his Makita 18-volt cordless impact drill. “It’s the most dependable, long lasting and easy-to-handle driver/drill I’ve ever used. I bought 5 of them for my crew to use.”

Best Buy
Henry Messersmith, Cullman, Ala-bama · Vol. 31, No. 6 (2007), p. 13

“I like my 2005 Makita 18-volt cordless hammer drill. I bought it because it was on sale at about the same price as a conventional drill. I don’t use this drill every day, but it’s always ready to go. I use it mostly to make holes through metal up to 3/8 inch in diameter.”

Makita power miter saw

4 Best Buys2 Worst Buys
Best Buy
Paul Peyton, Ava, Mo. · Vol. 41, No. 1 (2017), p. 15

“My Harbor Freight 5-drawer tool cart has a rated capacity of 750 lbs. Fully loaded, the large caster wheels make the cart easy to move around, even on a rough or cracked floor. This tool cart was a bargain at $169, which is only about a third the cost of other, lesser-quality products.

“Two years ago we installed eight 12-volt Trojan batteries in our solar power system and they’ve been trouble-free (www.trojanbattery.com; ph 800 423-6569). Other batteries we’ve tried have failed in as little as 6 mo.

“We built our house using a Makita 10-in. power miter saw. It cuts square every time, even after being reset to cut angles. The angles are perfect and repeatable. It’s equipped with a Freud blade, so every cut is perfectly smooth with no splintering. I highly recommend both the Makita saw and the Freud blade (www.freudtools.com; ph 800 334-4107).

“My 1994 Husqvarna 66 chainsaw has performed flawlessly with no repairs and still has the original spark plug. When the fuel hose collapsed a couple of years ago, I discovered the only available replacement hose was too short. (It’s a special molded hose with one end larger than the other and an integral grommet to seal where it goes into the tank). The dealer and company rep argued that the new, shorter fuel hose was correct, but the hose can’t reach the fuel once the tank goes below half-full. The arrogance and unhelpful attitude of this company was disappointing.”

Best Buy
Verneal Goertz, Canton, Minn. · Vol. 32, No. 4 (2008), p. 15

“My 2004 Makita chop saw is my best buy. It gets used at least three days a week, and sometimes eight or ten times a day, but it just keeps on going.”

Worst Buy
Rex Ballard, Waynetown, Ind. · Vol. 24, No. 4 (2000), p. 16

“My best buy is my 1998 Deere 7810 tractor. It has more power than a 7800 and is easier on fuel. It’s been trouble-free.

“My 1998 Case-IH 2366 combine is a dependable machine that has a lot of capacity and is a pleasure to operate. However, I wish it had a hydraulic feeder reverser on it.

“My Makita reciprocating saw is my worst buy. After the warranty expired, the saw did, too.”

Best Buy
Raymond Hockemeyer, Monroeville, Ind. · Vol. 24, No. 1 (2000), p. 15

“Two years ago I bought a new Makita chop saw which is my best buy. I’ve used it hard and it has done a very good job.

“We bought a plastic bottom for the un-derfeed auger on our Deere 6620 combine. After only one year of use it wouldn’t stay in place. The dealer wouldn’t do anything about it.”

Worst Buy
Monty Main, Crockett, Texas · Vol. 23, No. 2 (1999), p. 16

Monty nominates his Barrett 32 by 8-ft. aluminum gooseneck trailer with dual tandem wheels as his “best buy”. “This trailer is built for commercial haulers. I like the versatility it offers with the floating gate option in the front. It lets me haul commercial cattle or show cattle at the same time. The company stands behind its product and offers a 6-year warranty on the welds and other parts. We’ve already worn out one truck used to pull this trailer. The trailer looks as good today as the day we bought it.

“My Makita 14-in. chop saw is my worst buy. The first Makita I bought quit working after I made only six cuts through some 3/4-in. dia. pipe. I took it back to the dealer the next day and he gave me another saw to use. That one lasted only about five days before it quit, too. Both saws weren’t used enough to even burn the factory blade up. I still haven’t gotten the second saw fixed because of dealer problems.”

Best Buy
Coy Prokup, Porum, Okla. · Vol. 15, No. 2 (1991), p. 14

Coy Prokup, Porum, Okla.: Coy says his 1990 Sears Craftsman 3/4-in, electric drill is a “worst buy”. “The chuck cracked “T can't believe what this tractor can do.” the first time used itso I returned itand got my money back. Then bought a 3/8-in. Craftsman electric drill. The first ime used it the chuck froze up and I couldn't get the bit out. I returned it also. Sears used to put out the best material and workmanship. Today they put out junk.” On the “best buy” side, “My Makita 14in. cutoff saw cuts fast. No problems.”

Makita 12-volt cordless vac

4 Best Buys1 Worst Buy
Best Buy
Roger Kahler, Dunnell, Minn. · Vol. 42, No. 2 (2018), p. 14

“My wife is pleased with her Makita 12-volt cordless vac. Our daughter-in-law likes her new Guardline wireless driveway alarm (www.guardlinesecurity.com; ph 888 491-8064).”

Best Buy
Lowell Smith, Sr., Neoga, Ill. · Vol. 33, No. 5 (2009), p. 15

“My Makita 12-volt driver drill is my best buy. I used deck screws to put in a new door for a friend. My DeWalt 18-volt drill would only drive screws about half way in and then wouldn’t back them out. A fresh battery didn’t help. I called a friend who said I should try his Makita. I did and it worked like a champ. This drill will bury a 4-in. screw in solid oak, and then pull it right out.”

Best Buy
Kay Reitz, Mayport, Pa. · Vol. 23, No. 5 (1999), p. 14

Kay likes her Makita 12-volt battery-powered drill. “I’ve used it to screw on hundreds of sheets of roofing. Now that I have it I usually grab the drill and screws instead of a hammer and nails. No problems at all.”

Best Buy
Douglas Yergens, Blanchard, Idaho · Vol. 22, No. 3 (1998), p. 15

Douglas counts his DeWalt 18-volt trim saw and Makita 12-volt drill as two “best buys”.

“The trim saw has lots of power and is very handy to use. It definitely needs two batteries so you never have to wait on a charge.

“My Makita has been with me for six years. It has been used for everything from barn roof repair to hanging curtains. It’s hard to believe how versatile it is.”

Worst Buy
Richard D. Nemec, Midland, 8. Dak · Vol. 19, No. 4 (1995), p. 15

Richard D. Nemec, Midland, 8. Dak.: Richard's impressed with his DeWalt 3/8in. 110-volt electric drill. “It has a lot of torque and the chuck is made better than on most drills. Also, it has a double level that reads horizontally or vertically. “My Makita 12-volt 3/8-in. cordless drill is my worst buy. I couldn't keep it operating for more than a half hour without having to replace the battery. I sent it back to the service center but they said there was nothing wrong with it, I returned it and gota full refund.”

Makita cordless drill

3 Best Buys2 Worst Buys
Best Buy
Paul Zimmerman, Jr., Rutledge, Mo. · Vol. 35, No. 4 (2011), p. 15

“My 2004 New Holland LS 170 skid loader runs good and can haul heavy loads. It has about 3,000 hours on it with no problems.

“I didn’t use my 2005 Makita cordless drill very long before the gears stripped. Of course, the warranty had already expired.”

Best Buy
Bruce Bird, Tisdale, Sask. · Vol. 31, No. 3 (2007), p. 14

“My Makita cordless drill and my old Makita table saw are both best buys. I bought my little Makita 7 1/4-in. table saw back in 1986 and have never had a minute of trouble with it. It’s made entirely from aluminum and is super light. I can use it to cut green poplar for hours, yet the motor won’t even get warm. It is noisy, though.

“My Makita cordless 9.6-volt drill performs great. It’s lightweight and runs for a long time on a charge. I’ve replaced the battery only once in nine years. It has taken a number of falls off scaffolds but just keeps on ticking. I’ve found that most Makita products treat me pretty good.” a

company called me a new frame. I’ve seen other machines like mine with the same problem.”

Worst Buy
Morris Hogard, Ontonagon, Mich. · Vol. 28, No. 1 (2004), p. 13

A 2002 Makita cordless drill rates as Morris’s “worst buy”. “The main problem is that the batteries have poor ‘charge holding’ capacity. Last spring I tried using it to tap 100 maple trees for sap. However, I was able to tap only about five trees before I had to change the batteries. I finally went back to using my 6-year-old Porter model so I could get the job done.”

Best Buy
Bradley Meyer, Zeeland, Mich. · Vol. 25, No. 5 (2001), p. 15

Bradley nominates his 1993 Honda Fourtrax 200 4-wheeler ATV as his “best buy”. “We haven’t had any major problems with it. It’ll easily pull our irrigation pump and lawn cart. We recently bought two Polaris Sport 400 4-wheeler ATVs and they run pretty good, too.

“We’ve had numerous problems with our DeWalt 12-volt cordless drills. They lock up on us and we’ve also had problems with the battery chargers - they fried two batteries. We have a 9-year-old Makita drill that has never had any problems. So we’re going to replace the DeWalt models with new Makitas.”

Worst Buy
Tom Wilson, Killbuck, Ohio · Vol. 21, No. 4 (1997), p. 17

A 1994 Ford 1520 tractor rates as Tom’s “best buy”. “It has performed perfectly and has more power for its size than any other tractor I’ve ever seen. All we’ve done is change the oil and filter. “My 1997 Makita cordless drill is my worst buy. It’s poorly balanced, and the reversing switch is poorly located which makes it hard to use. Also, the circuit breaker that protects the motor kicks out too easy.”

Best Buy
Glen Harris, Salem, Mo. · Vol. 49, No. 2 (2025), p. 13

Glen has two Makita best buys. “My snowblower is about two years old. It has good airspeed but is light to handle.

“My 16-in. electric chainsaw is easy to operate, lightweight and adequately harvests small firewood.”

Glen is disappointed in his 2019 Deere 5075E tractor. “It’s unstable in operation because the wheelbase is too short, making it weighted incorrectly. We’ve added 300 lbs. of weight on each wheel but must use great caution to avoid instability. I wrote to Deere but, of course, received no response. I see many of this style tractor for sale in farm periodicals.”

Best Buy
James Stauffer, Port Trevorton, Penn. · Vol. 46, No. 4 (2022), p. 15

“My best buy is a small Makita 42cc chainsaw bought in 2019. It has a lot of power and always starts well, even if it is zero degrees outside. I use it to cut firewood and for carpentry projects”

Feature storyBest Buy
Jim Ruen, La Crescent, Minn. · Vol. 42, No. 1 (2018), p. 14 · Full story at FARM SHOW →

“Makita’s cordless chainsaw makes cleaning up brush and thinning out trees a lot more fun. It uses the same batteries as my cordless Makita 7 1/4-in. circular saw.”

Read the whole story →
Best Buy
John Zaborny, Jackson, Mich. · Vol. 38, No. 3 (2014), p. 12

“It’s the best chainsaw I’ve ever owned,” says John about his 2008 Stihl MS 250. “I burn 75 cords of wood per year to heat my home and 2 garages, as well as provide hot water. I’ve gone through a lot of different saws over the years, but this one never runs out of power and has been trouble-free. It still has the original starter rope.

“My 2012 Makita 14-in. chainsaw is unbalanced and hurts my shoulder whenever I use it. The starter rope broke in the first week, the gas primer bulb cracked, and the chain came off and bent the bar. When I returned the saw to the company they told me it had been misused, yet I had not even run a gallon of gas through it yet.”

Makita cordless tools

3 Best Buys1 Worst Buy
Best Buy
Jonathan Pollock, Powhattan, Kan. · Vol. 50, No. 3 (2026), p. 14

“I bought a set of Makita cordless tools that included an impact driver, a hammer driver, two 18-volt 4Ah batteries, and a charger. I haven’t had any problems with them.”

Best Buy
Jim Hardy, Au Gres, Mich. · Vol. 47, No. 3 (2023), p. 15

Jim nominates Makita battery tools as a best buy. “I’ve been using Makita tools since 1986, and they keep getting better. Every time I buy a new tool, it’s better than the last. My last tool purchased was a jigsaw, and it’s better than a plug-in. It’s lightweight and has more power. I use it a lot for metal fab like a hack saw, and it cuts like butter. Great tools.”

Best Buy
Merrill J. Smith, Deer Park, Wash. · Vol. 36, No. 5 (2012), p. 15

“I’ve had great success with Makita tools, both corded and cordless, including drills, a chopsaw, 7.2-volt flashlight, sawzall, and 1/4-in. hex impact driver. The flashlight was left outside on the ground all winter underneath 4 ft. of snow, but when I found it the following spring it was still charged and worked fine. I use the impact driver nearly every day and haven’t had to recharge the lithion battery in it yet after almost a year.

“The battery-powered sprayer I bought at Northern Tool would hardly spray far enough out to clear my feet, and the batteries lasted only about 20 min. before they went dead. I also bought a water well pressure tank from Northern Tool. It was advertised as an 80-gal. model but turned out to be only 35 gal. I called to see why and was told the ad meant it ‘performed like 80 an gal.’. What a farce.”

Worst Buy
Bob Grenzow, Sumas, Wash. · Vol. 24, No. 4 (2000), p. 14

“I’m disappointed with Makita tools and the lack of company support. The cordless drill that I bought didn’t have as much power as I would’ve liked and the gearbox failed. My Makita angle grinder also failed due to a light duty gearbox. It would’ve cost more to repair it than to buy a new Milwaukee grinder.”

Best Buy
Clifford White, Clearwater, Kansas · Vol. 30, No. 6 (2006), p. 12

“My best buy is my Makita 4 1/2-in. hand-operated grinder. It’s light enough that it handles easy, and it’ll grind metal as fast as a larger model.

“Our 2002 Dixon riding mower is our worst buy. It doesn’t mow level, so after I’m done mowing the lawn looks like a sheet of corrugated metal. I do like the engine and the rig’s turning ability, but that’s all I like about this machine. I paid almost $4,000 for it.”

Worst Buy
James A. Helleso, Las Vegas, Nevada · Vol. 28, No. 6 (2004), p. 15

“I use my 1996 Makita 4 1/2-in. grinder hard for welding projects, but it never fails to keep going.

“My 2003 Harbor Freight 9-in. grinder is my worst buy. After the first few hours I used it, ‘white stuff’ started coming out and it soon quit working. The warranty had expired so it wasn’t worth fixing. I learned my lesson - always buy quality tools.”

Makita 4-in

2 Best Buys0 Worst Buys
Best Buy
Marcus Yoder, Grove City, Minn. · Vol. 18, No. 5 (1994), p. 15

Marcus Yoder, Grove City, Minn.: “I'm impressed with my Black & Decker 14-in. chop saw, Makita 4-in, hand grinder, and Lincoln 225-amp welder. They've all had steady use over the past 10 years and performed well. “My Craftsman 1/2-in. drill is built too light. The handle broke off the first year I used it.”

Best Buy
David L. Rohleder, Morland, Kan. · Vol. 8, No. 3 (1984), p. 13

David L. Rohleder, Morland, Kan.: His "best buy" is a Hydra Bed round bale hauler and unroller made by Triple C Manufacturing, Sabetha, Kan. "'I like it because you can be feeding cattle round bales one minute and hooking onto a gooseneck trailer the next. It leaves the pickup bed clear, unlike other pickup bale haul- ers. | also like the flatbed that is a part of it because it's easier to get tools and other items on and off than a regular pickup box." Kenneth Lelm, Turtle Lake, N. Dak.: Kenneth has three "best buys". "Our 1984 Chevrolet Silverado pickup gets 20 mpg, and gives a smooth quiet ride. It looks good, too. Our Makita 4-in. grinder is very handy and we've been able to depend on its good performance. FARM SHOW is also a best buy."

Best Buy
Gerard Waters, Summerville, S.C. · Vol. 47, No. 2 (2023), p. 15

“My best buy is my Makita 7 1/4-in. dual battery-powered circular saw. This saw has great power anywhere on the property. The batteries fit all Makita tools. The charger has a fan for cooling. Cutting small trees and fixing wooden fencing was very satisfying.”

Best Buy
Glenn Rooker, Tuttle, Okla. · Vol. 17, No. 6 (1993), p. 15

Glenn Rooker, Tuttle, Okla.: “My 1992 Makita 7 1/4-in. power hand saw is the best balanced and smoothest running saw I've ever used. The line guides are true and the saw performs well.”

Makita 9-volt drill

2 Best Buys0 Worst Buys
Best Buy
B e n P a r k s, Austin, Tex. · Vol. 44, No. 4 (2020), p. 12

“I’ve been using Ballistol oil since reading about it in FARM SHOW 15 years ago and it’s better than any penetrating or lubricating oil I’ve ever tried. I won’t use anything else. A very versatile product.

“My Milwaukee 75th Anniversary drill, purchased in 1999, has been very reliable. I’ve used it for electrical work and other heavy jobs, beating it up pretty good. Very reliable. I’m planning to buy the 100th Anniversary drill in 2024 to keep as a collector’s item.

“My 1992 Makita 9-volt drill has really held up to hard use and several drops. I replaced the original battery packs with Voltman batteries in 2004 and they’re still holding a strong charge. Haven’t worn out like the originals (www.voltman-batteries.com; ph 877-816-7728).”

Best Buy
Ben Parks, Austin, Texas · Vol. 35, No. 2 (2011), p. 13

“My Battery Tender battery maintainer is my best buy. It’s a money saver because I don’t have to buy replacement batteries for my vehicles as often. It helps prevent battery sulfation and works great for cars, trucks and other vehicles that are used only occasionally.

“For example, I have a collector car that sits idle most of the time. Back in 2001, I bought a cheap battery for it, just to get by. About that time the Battery Tender started showing up in stores, so I bought one and kept it connected to the car’s battery to trickle charge it. Unbelievably, the battery lasted for nine years.

“My 1992 Makita 9-volt cordless drill, which was given to me in 1998, is one tough drill. It has a heavy-duty motor, switch and case. I had to replace the switch back in 2006, and when I opened the drill, I saw that its gears are made of metal instead of plastic, like on some newer drills.

“The drill’s 9-volt battery wouldn’t charge any more so I sent it in to a company called Voltman Batteries, after reading about them in FARM SHOW (www.voltmanbatteries.com; ph 419 526-1570). I got back a new battery with a lot more power than the old one. It was $88 well spent.

“I like Ballistol multi-purpose lubricant (www.ballistol.com; ph 800 253-2460) which was also featured in FARM SHOW. In fact, I like this product so much that I don’t even buy WD-40 any more. A little of this oil goes a long way when lubricating parts, freeing stuck bolts, and cleaning guns. The best thing about Ballistol is that it’s waterproof and doesn’t wash off easily, so it prevents rust.”

Makita cordless driver

2 Best Buys0 Worst Buys
Best Buy
Terry Heeke, Dubois, Ind. · Vol. 23, No. 2 (1999), p. 15

Two of Terry’s “best buys” are his 1997 Deere 270 disc mower and his 1997 Deere 752 hay tedder. “The mower doesn’t clog and cuts twice as fast as the Deere 1209 mower-conditioner I used before. The tedder fluffs and dries hay as fast as a conditioner.”

Terry also says he couldn’t do without his Makita cordless driver. “It comes in real handy for fixing feeders and other work in my livestock barns.”

Best Buy
Everett Hein, New Harmony, Ind. · Vol. 17, No. 5 (1993), p. 16

Everett Hein, New Harmony, Ind.: Everett's pleased with his Makita cordless drill driver and 4-in. disc grinder. “They're well-built and dependable. “My Kawasaki Bayou 3004-wheel ATV is several years old but still works great and is almost trouble-free. I use it to repair fences and to check out cattle in pastures.”

Makita model

2 Best Buys0 Worst Buys
Best Buy
Larry Paul, Shickley, Neb. · Vol. 15, No. 2 (1991), p. 12

Larry Paul, Shickley, Neb.: Larry says Beacon herbicide is his “best buy”. “From lime to Lime a product appears that opens new vistas to the user, This is such a product. Corn growers now have an alternative to rotation for shattercane control.” ef ee linate suys been sued for its transmissions, though. “My Black & Decker deluxe cordless screwdriver is a worst buy. This has to be the most useless tool ever made. It doesn't have enough power Lo drive even the smallest screws into soft wood. The batteries last long enough to drive only two or three small screws, then require an hour for recharging. I replaced it with a Makita model. Absolutely no comparison.”

Best Buy
Raymond Ward, Prince Albert, Sask. · Vol. 15, No. 2 (1991), p. 12

Raymond Ward, Prince Albert, Sask.: Raymond's happy with his 1988 Kubota L28504-WD tractor. “It’s got 1,000 troublefree hours and I've used it with a snowblower, roto tiller, flail mower, and Sft. rear-mounted blade. I cut four acres of grass and a half mile of roadside per week during summer, This tractor burns less fuel than the Yanmar 155 model itreplaced, but has twice as much power. Starts good even at 40 below zero. It’s so easy to operate that my wife and children can drive it, too. “My 1984 GMC 1500 1/2-ton pickup equipped with a 6.2 liter diesel engine and automatic overdrive transmission was neither a best or worst buy. However, the transmission was a joke. At 20,000 miles the dealer replaced it with a new one and again at 50,000 miles, both under warranty. At 65,000 miles, with the warranty expired, the transmission failed again and would have cost $2,400 to repair. I replaced it with anew Turbo 400 transmission which solved the problem. It cost me $600, At 185,000 miles I sold the pickup. The engine had never been touched and the body was still in good condition. General Motors should have been sued for its transmissions, though. “My Black & Decker deluxe cordless screwdriver is a worst buy. This has to be the most useless tool ever made. It doesn't have enough power Lo drive even the smallest screws into soft wood. The batteries last long enough to drive only two or three small screws, then require an hour for recharging. I replaced it with a Makita model. Absolutely no comparison.”

Makita electric trimmer

2 Best Buys0 Worst Buys
Best Buy
Bob Myracle, Baxter, Tenn. · Vol. 47, No. 6 (2023), p. 13

“The battery on my Makita electric trimmer lasts a long time. It’s quiet and powerful. I like the tap-to-feed head feature.

“The chain speed on my Worx pole saw is too slow. It bounces when placed on a limb.”

Best Buy
Robert Mork, Sevierville, Tenn. · Vol. 30, No. 2 (2006), p. 13

“I bought a used Exmark commercial mower on eBay and it’s my best buy. This mower is built like a tank and is very dependable. I use it during the summer to mow six acres at least once a week. This machine can take the abuse of mowing over rough ground and through tall grass and brush. Also, it’s very rebuildable so you can operate the same one forever.”

“My Makita string trimmer is a good machine, but the brush blades are expensive and don’t stay sharp for long. I had a stack of leftover carbide Skil saw blades laying around after building my new house, so I decided to adapt one to the trimmer. I used some washers to reduce the spindle hole and to space the backing plate. The blades cut through weeds, brush and saplings up to about 3 to 4 in. in diameter. I’ve been told this idea is not recommended, although I’ve used these blades for about two years without any problems. I always wear a face shield and gloves when doing trimming work. As with any rotating blade or chain, one must use caution and be heads up at all times.”

Makita 10 mm drill

1 Best Buy0 Worst Buys
Best Buy
James Smith, Hamlin, N.Y. · Vol. 16, No. 3 (1992), p. 13

James Smith, Hamlin, N.Y.: James likes his 1990 Makita 10 mm drill. “I’ve used it for over a year with no problems. In the past I’ve used Black & Decker, Craftsman, and Skil drills, but none of them lasted more than six months.” On the “worst buy” side, he’s unhappy with his 1989 Ford F-150 pickup. “I had problems with the engine, transmission, power steering, springs, and brakes. The pickup was in the shop 25% of the time. Finally I returned it to the manufacturer under New York's lemon law.”

Makita 10.8-volt cordless lithium ion

1 Best Buy0 Worst Buys
Best Buy
Albert Sutlick, Walla Walla, Wash. · Vol. 36, No. 2 (2012), p. 13

He likes his 2009 Makita 10.8-volt cordless lithium ion drill and impact driver kit. “It has plenty of power and is small and lightweight. The batteries are about the size of a small LED flashlight, but the charge lasts several months. The entire drill is small enough to fit into the pocket of my overalls.”

Makita 120V AC angle grinder

1 Best Buy0 Worst Buys
Best Buy
Doran Gast, Hudson, Fla. · Vol. 45, No. 4 (2021), p. 14

“My 1981 Makita 120V AC 4-in. angle grinder just came back from its second trip to the factory repair center. The first time was for a clean-up and lube, and this time involved a cut power cord. The company provided free labor and shipping both ways, and I paid for the parts. That’s what I call service.

“My Makita 120V AC 7 1/4-in. circular saw and 3/8-in. Nicad cordless driver drill both work great.

“My 2015 Jayco Pinnacle 5th wheel RV is a worst buy. The microwave couldn’t even pop a bag of popcorn on the first trip. On our next trip the furnace failed, and I had to go back to the dealer 4 times to get it fixed under warranty. Three of the rig’s original tires failed within 2 years. Both air conditioners failed after the warranty expired and the dealer would only replace them, not repair them. The clean water toilet valve leaked, and we had to replace the whole toilet. Now the fireplace, landing and leveling system, and LED light strips are broken.”

Makita 120V AC 7 1/4-in circular saw

1 Best Buy0 Worst Buys
Best Buy
Doran Gast, Hudson, Fla. · Vol. 45, No. 4 (2021), p. 14

“My 1981 Makita 120V AC 4-in. angle grinder just came back from its second trip to the factory repair center. The first time was for a clean-up and lube, and this time involved a cut power cord. The company provided free labor and shipping both ways, and I paid for the parts. That’s what I call service.

“My Makita 120V AC 7 1/4-in. circular saw and 3/8-in. Nicad cordless driver drill both work great.

“My 2015 Jayco Pinnacle 5th wheel RV is a worst buy. The microwave couldn’t even pop a bag of popcorn on the first trip. On our next trip the furnace failed, and I had to go back to the dealer 4 times to get it fixed under warranty. Three of the rig’s original tires failed within 2 years. Both air conditioners failed after the warranty expired and the dealer would only replace them, not repair them. The clean water toilet valve leaked, and we had to replace the whole toilet. Now the fireplace, landing and leveling system, and LED light strips are broken.”

Makita 125

1 Best Buy0 Worst Buys
Best Buy
Ernest Lokken, Weyburn, Saskatchewan · Vol. 11, No. 2 (1987), p. 14

"The equipment that gave me the most problems was Hesston. I had a 1-ton baler that the dealer had no idea how to service or repair, I traded it in for a Hesston round baler but no one at the dealer had ever seen one of them or knew how to service it. Every piece of Hesston equipment I've ever had or seen was well engineered but poorly built.” Ernest Lokken, Weyburn, Saskatchewan: He likes his 1986 Makita 125 mm disk grinder, “It's light to handle and has plenty of power. It works well for sharpening the guards on my combine. With the knife removed, I sharpened a 24-ft. header in 30 minutes.”

Makita 14.4-volt drill

1 Best Buy0 Worst Buys
Best Buy
Dennis Lee, Melvin, Ill. · Vol. 32, No. 6 (2008), p. 15

“I like my Makita 14.4-volt drill and driver kit. The impact driver is the most used tool in our shop. Great for driving screws.”

Makita 14.4-volt 3/8-in cordless drill

1 Best Buy0 Worst Buys
Best Buy
Jim Wilkinson, Reva, S. Dak. · Vol. 24, No. 1 (2000), p. 16

“I’m well pleased with my 1994 Ford 9030 Bi-Directional tractor. I use it to do everything from cutting hay to hauling manure and also to feed livestock during winter.

“My 1994 Belarus 825 tractor was a real lemon. I put only about 100 hours on it, and it was broke down most of the time. One time some wires burned off under the dash so it wouldn’t start. Later, a fuel injector went bad and an air conditioning hose blew. There were also numerous other problems. I finally traded it off.

”My reconditioned Makita 14.4-volt 3/8-in. cordless drill is a really handy tool for doing everything from household repairs to driving screws on a tin roof. It has a lot of power, and the battery runs a long time on a single charge.”

Makita 14-in

1 Best Buy0 Worst Buys
Best Buy
Ralph Jorgenson, Calgary, Alberta · Vol. 19, No. 1 (1995), p. 16

Ralph Jorgenson, Calgary, Alberta: “I don't know how old my Makita 14-in. metal chop saw is, but I know I've had it long enough to qualify as a best buy. Granted, there's not a lot that can go wrong with a chop saw, but I'm very satisfied with mine.”

Makita 14-volt impact driver

1 Best Buy0 Worst Buys
Best Buy
Andrew Heinonen, Gwinn, Mich. · Vol. 36, No. 2 (2012), p. 14

“I like my 2005 Makita 14-volt impact driver. As a contractor, I use this tool almost every day. It’s compact, durable, and powerful. Ergonomically, this tool fits my hand well. It has a trigger-activated spotlight that precisely illuminates the driver tip, which is a nice feature when working in dark cabinets, etc.”

On the “worst buy” side, he lists his 2006 DeWalt laminate and trim router kit. “Right out of the box, the main base was ‘out of square’. Bit changes are clumsy, and the depth control is hard to operate. I finally set this tool on a shelf and bought a Bosch Colt trim router, which I really like.”

Makita 18V 1/2-in impact

1 Best Buy0 Worst Buys
Best Buy
Lance Moreland, Forsyth, Mont. · Vol. 50, No. 4 (2026), p. 13

“I’ve had my Makita 18V 1/2-in. impact for about 6 years. It’s got plenty of power, and the battery lasts a long time between charges. It’s a good tool.”

Makita 18-volt LXT lithium-ion

1 Best Buy0 Worst Buys
Best Buy
Carvel Cheves, Bunn, N.C. · Vol. 46, No. 3 (2022), p. 13

A Makita 18-volt LXT Lithium-Ion Cordless Inflator (Model DMP180ZX) is a “best buy” for Carvel. “With little expectation, I tried it on one of my big tractor tires and it did the job. It’s not really fast but is efficient and mighty handy. It beats having to drag out an air tank.”

A Husqvarna 320iL Cordless Handheld Blower Kit with battery and charger did not meet Carvel’s expectations. “The battery is the Achilles’ heel of this blower. It overheats quickly with full volume, continuous duty and takes about an hour to cool down and recharge. I was lucky to get 5 min. of blowing, certainly not enough to blow off most hay equipment before storing. Their battery chainsaw uses the same battery with the same problem. No more Husky battery stuff for me – going blue all the way.”

Makita 18-volt X2 brushless string trimmer

1 Best Buy0 Worst Buys
Best Buy
Arien Steidinger, Fairbury, Ill. · Vol. 45, No. 1 (2021), p. 12

“My Makita 18-volt X2 brushless string trimmer is a great tool. It’s lightweight, quiet, has lots of power, and I don’t have to mix gas and oil anymore. I like that it has reverse if it gets tangled up but so far that hasn’t happened, even in tall brome. With two 18-volt 5.0Ah batteries, it runs for a long time. I highly recommend this trimmer.”

Makita 2414

1 Best Buy0 Worst Buys
Best Buy
Ronnie Waterman, Kohoka, Mo. · Vol. 9, No. 3 (1985), p. 14

Ronnie Waterman, Kohoka, Mo.: He names his Makita 2414 cutoff saw for metal as ‘best buy’’. “It cuts very well and is great for cutting pipe and channel iron. It leaves smooth edges and makes ends fit close together for easy welding. Saves lots of time.”

Makita 3

1 Best Buy0 Worst Buys
Best Buy
Charles Romansky, Orwell, Ohio · Vol. 14, No. 4 (1990), p. 14

Charles Romansky, Orwell, Ohio: “My 1989 Makita 3 by 24 belt sander has been trouble-free. “My worst buy is a 1989 Ford F-150 pickup equipped with a 300 cu. in. 6-cylinder engine. When I start the truck it revs up to 1,800 to 2,000 rpms. Mechanics know there’s a problem, but the company won't fix it, I've taken it to five different dealers, Otherwise it’s an excellent pickup. The 4speed creeper with 3.08 rear end does a good job of pulling trailers.”

Makita 3/8-in drive electric drills

1 Best Buy0 Worst Buys
Best Buy
Vincent Theriault, Salt Spring Island, B.C. · Vol. 34, No. 4 (2010), p. 15

“It’s the most dependable hand tool I’ve ever owned, and also the toughest,” says Vincent about his Paslode gas and battery-operated nailing gun. It’s designed to use 2 to 3 1/2-in. nails.

“My 50-ft. wide Howard Rotavator tiller is a best buy. Over the years I’ve owned two of the company’s tillers and have worn them to the core, but I only broke a drive chain once.

“In just a few months, I went through two Makita 3/8-in. drive electric drills while using them to operate hole saws. I used one to cut a 1/4-in. dia. hole in 3/8-in. thick steel, and the other to cut a hole in a 2 by 4. In both cases the hole saw jammed. This company used to make a good drill.”

Makita 4

1 Best Buy0 Worst Buys
Best Buy
Robert Bell, Gardner, N. Dak. · Vol. 12, No. 4 (1988), p. 13

Robert Bell, Gardner, N. Dak.: “We bought a Makita 4 1/2 in. portable hand grinder several years back. We use italmost daily and seldom ever use our bench grinder anymore. This Makita is lightweight and “Since delivery we've never had them all working at one time.” small enough to get into an awkward position yet is powerful. It’s an excellent tool.” Robert’s had problems with General Electric Phoenix VHF business band radios bought in 1986. “At first we had trouble getting the radios delivered. Since delivery we’ ve never had them all working /2-.J— FARM SHOW « 13 (Continued from next page) at one time. General Electric is very slow about sending repair parts to the dealer, The radios do have good range when and if they work. Our dealer is as disgusted as we are about the slow parts service.”

Makita 5402A circular saw

0 Best Buys1 Worst Buy
Worst Buy
Norm Venturino, Hayden, Idaho · Vol. 46, No. 3 (2022), p. 14

“My ‘best buys’ are the cordless line of DeWalt tools. My most recent favorite is the DeWalt 20-volt 7 1/4-in. miter saw (model DCS361B). As a custom home builder, I find that it saves time and money to use a cordless tool. The miter saw is perfect for trim and finish work while still having the capability of sawing up dimensional lumber when needed. It’s lightweight and makes setup and moving it to a site a breeze. Paired with a quality 60-tooth blade, it cuts with precision and zero tear-out.

“The worst product I ever purchased was the Makita 16-in. circular saw (model 5402A). This saw is an unwieldy monster that is very heavy, clumsy and dangerous. Like many of its users, I bought one to gang cut rafters as well as crosscut large timbers. However, the saw is so heavy and produces so much torque on spool up that it makes freehand sawing a difficult task, particularly if the cutting application requires a vertical position above the waistline. After wrestling with the saw through two home builds, I sold it.”

Makita 6011D 12-volt cordless drill

1 Best Buy0 Worst Buys
Best Buy
N. Nelson Roth, Wellesley, Ontario · Vol. 23, No. 4 (1999), p. 17

“My Makita 6011D 12-volt cordless drill has a lot of power and is equipped with features that I like. It’s a two-speed variable model with six torque settings. It also reverses.

“MyBosch CSB500 drill is my worst buy. The switch burned out and cost $50 to replace. It’s built too light for farm work.”

Makita 6012

1 Best Buy0 Worst Buys
Best Buy
Tom Tucker, Elgin, Ore. · Vol. 18, No. 4 (1994), p. 15

Tom Tucker, Elgin, Ore.: Tom likes his Makita 6012 heavy-duty cordless electric drill. “We've put metal roofs on all our buildings using screws driven in with this driver-drill. It has probably driven 20,000 screws with no problems, The keyless chuck is a real time saver. “T bought a used Pittsburgh 4-bottom plow last year, Itpulled hardand didn’t bury much straw. I tried different coulters and different shapes of trash boards with no luck. I finally gave up and sold it ata loss.”

Makita 6093D cordless drill

0 Best Buys1 Worst Buy
Worst Buy
David Batker, Brooklyn, Wis. · Vol. 14, No. 2 (1990), p. 14

David Batker, Brooklyn, Wis.: “It's powerful and has good transmission gear ranges,” reports David, pleased with his 1989 Dodge W350 4-WD pickup equipped with a Cummins diesel engine and 4-speed transmission. It replaced a 1985 Ford equipped with a 460 cu. in. gas engine. “We use it to pull corn wagons weighing 12,000 Ibs. It gets 16 mpg loaded and 22 mpg empty which sure beats the Ford’s 7 to 11 mpg.” David's “worst buy” is his 1989 Makita 6093D cordless drill . “The battery pack goes dead after about 5 min, of use. If we didn't alternate two batteries it would be virtually useless, It also has less torque than Black & Decker's cordless drill.”

Makita 6421 bar chainsaw

1 Best Buy0 Worst Buys
Best Buy
Joseph Lundeen, Mukwonago, Wis. · Vol. 49, No. 4 (2025), p. 15

Joseph nominates his 2022 Makita 6421 24-in. bar chainsaw. “I’m pleased with this saw because it cold starts with two pulls. When the saw is warm, it starts with one pull. I can set it down after cutting, and it’ll stay running at an idle.”

Makita 9501

1 Best Buy0 Worst Buys
Best Buy
Jeff Collins, Cumberland, Ohio · Vol. 18, No. 3 (1994), p. 15

Jeff Collins, Cumberland, Ohio: “Tlike my Black & Decker 4075 electric angle grinder. I’ve used it for years and worn out dozens of 7- and 9-in, grinding wheels. The only repairs have been to one or two sets of brushes and to the switch. It’s a rugged American-made tool at a good price. “I'm pleased with my Makita 9501 4-in. electric grinder. I’ve only had to replace several sets of brushes, one or two armature bearings, and the power cord.”

Makita 9505B

1 Best Buy0 Worst Buys
Best Buy
Dale Hallett, Carstairs, Alberta · Vol. 9, No. 6 (1985), p. 13

Dale Hallett, Carstairs, Alberta: “When we got our 4-in, Makita 9505B grinder we wondered if it would ever be used because we already owned a 7-in. angle grinder. We have since found it to be one of the most used tools in our shop. Very handy for light grinding and tight spots. It's our best buy. “Our worst buy is a Black & Decker Yo-in. variable speed, reversible drill. After only four months of occasional very light use the switch went out. Its replacement lasted only 6 months.”

Makita DCS6401 chainsaw

1 Best Buy0 Worst Buys
Best Buy
Jack Prier, Spring Creek, Nevada · Vol. 35, No. 2 (2011), p. 12

Jack’s impressed with his 2009 Makita DCS6401 chainsaw. “Over the years I’ve owned more than 20 saws from many different manufacturers. This saw is a real joy to use. It’s dependable, easy to start and run, powerful, smooth, and has great balance at all angles.”

Makita LXT 2020 battery-powered chain saw

1 Best Buy0 Worst Buys
Best Buy
Mark Johnson, Moose Lake, Minn. · Vol. 44, No. 4 (2020), p. 13

Mark’s best buy is his Makita LXT 2020 battery-powered chain saw. “It came with 4 batteries, and when they’re worn out, so am I. No gas cans to mess with, lightweight, and no pull starting. It does a great job cutting.”

Makita MM4 string trimmer equipped

1 Best Buy0 Worst Buys
Best Buy
David Veach, Zwingle, Iowa · Vol. 42, No. 5 (2018), p. 15

“My Makita MM4 string trimmer equipped with a 4-stroke engine starts good and has a unique line wind-up system that I like.

“My Dolmar chainsaw starts good and is a best buy.”

Makita XC403 cordless chainsaw

1 Best Buy0 Worst Buys
Best Buy
Jim Ostrander, Kingston, N.Y. · Vol. 44, No. 3 (2020), p. 15

“I love my Makita XC403 14-in. cordless chainsaw. It’s lightweight and powerful and is just the ticket at my sawmill, where I’ve used it to cut logs up to 20 in. dia. It’s powered by four 18-volt batteries that last a long time. It comes with a 2-battery charger and a battery-powered light.”

Makita XCU03 36-volt electric chainsaw

1 Best Buy0 Worst Buys
Best Buy
Tom Wysocki, Hillsboro, Wis. · Vol. 46, No. 1 (2022), p. 15

“I bought a 2021 Makita XCU03 36-volt electric chainsaw. I’m very impressed at how long the batteries last. It comes with a 2-battery charging station and the batteries charge in just 45 min.”

Makita XML03 cordless walk-behind mower

1 Best Buy0 Worst Buys
Feature storyBest Buy
Wendy Wellnitz, La Crescent, Minn. · Vol. 43, No. 4 (2019), p. 13 · Full story at FARM SHOW →

“The Makita XML03 cordless 18-in. walk-behind mower is a real relief after years of pushing a gas-powered mower. No more spilling gas or oil or struggling to start with a rope pull.”

Read the whole story →

Makita XPG01Z 18-volt LXT grease gun

1 Best Buy0 Worst Buys
Best Buy
Will Pilkington, Pennington, Ala. · Vol. 46, No. 2 (2022), p. 13

“We have a Lincoln pneumatic grease gun, but you can’t always bring the dozer back to the shop when it’s time to grease it. The Makita XPG01Z 18-volt LXT grease gun is one of those purchases that will make you wonder why you didn’t have it 10 years ago. No more hose and it’s a breeze to load grease into. We’ve fought with that Lincoln for years - loading grease into it and trying to get the air out of it. You won’t have that issue with the Makita.

“My 2021 Wagner FURNO 500 heat gun lasted three uses at which time the fan quit running. The company did send me another one after I paid to have the old one shipped back and a month doing without it. When you need something to work, you’re counting on it at the time, not a month later. Every time these good American companies send their products out to China to be made, we have to suffer with inferior products.”

Makita XWT08 1/2-in impact wrench

1 Best Buy0 Worst Buys
Best Buy
Dylan Berger-Hermes, Wasilla, Ala. · Vol. 45, No. 1 (2021), p. 13

“I always looked at battery-operated tools as somewhat cheesy, especially for big jobs. As a fulltime hay farmer I work on a lot of equipment. I tried the Makita XWT08 1/2-in. impact wrench. The power is amazing. It will break loose 1 1/8-in. lugs on our goose-neck trailer with ease. I feel like I am not losing anything by using it over a pneumatic wrench.”

Makita electric 120-volt

1 Best Buy0 Worst Buys
Best Buy
Elmer Hochstetler, LaGrange, Ind. · Vol. 47, No. 2 (2023), p. 15

“I bought a new Makita electric 120-volt, 14-in. concrete and steel saw. It’s portable, and I don’t have the engine exhaust inside a building. I just plug it in and pull the trigger. There is a cordless version, but it’s much more expensive.”

Makita abrasive cut-off blades

1 Best Buy0 Worst Buys
Best Buy
Henry Cole, Cliff, N. Mex. · Vol. 34, No. 2 (2010), p. 13

“I’m happy with Makita 14-in. abrasive cut-off blades. They work great on ½-in. sq. tubing. However, don’t buy abrasive cut-off wheels for chop saws that have a fabric weave pattern on the sides. It should look like an Emery wheel, with no fabric. The cheap fabric wheels just melt, due to friction, and they won’t cut straight, either.”

Makita angle grinder equipped

1 Best Buy0 Worst Buys
Best Buy
Kevin Ranette, Moyie Springs, Idaho · Vol. 39, No. 5 (2015), p. 15

“I bought a Makita angle grinder equipped with a paddle switch to use in my steel fabrication and welding shop. It works great. I’ve dropped it countless times and stepped on it, but it still works like new. I highly recommend this tool.”

Makita drill/driver set

1 Best Buy0 Worst Buys
Best Buy
David Zietlow, Minot, N.D. · Vol. 49, No. 2 (2025), p. 14

“I initially bought a Makita drill/driver set. I was so satisfied that I purchased many other Makita tools, including a blower, weed wacker, sawzall, jigsaw and chainsaws. The battery power lasts a fairly long time. They’re very durable.”

David is dissatisfied with solar-powered lights. “Each year, I try another brand or type. They’re not very bright and don’t seem to last more than a couple of months. It’s more expensive to replace the batteries than to buy a new light.”

Makita cordless drill heads

1 Best Buy0 Worst Buys
Best Buy
David J. Cowling, Denver, Colo. · Vol. 17, No. 6 (1993), p. 14

David J. Cowling, Denver, Colo.: David says his Makita cordless drill heads his “best buy” list. “I’m building a log home on a remote site that doesn’t have electrical power. I use my Makita to drill 1/4-in. dia. pilot holes for the spikes that connect the logs. It runs all day long on just two batteries, has plenty of torque and is lightweight.”

Makita chain mortiser

1 Best Buy0 Worst Buys
Best Buy
Mick Maxwell, Lillooet, B.C. · Vol. 33, No. 5 (2009), p. 12

“I like my 1996 Dodge Ram pickup equipped with a 12-valve Cummins diesel engine. It gets about 23 ½ mpg and has a lot of power for passing and towing, etc. I think it’s the best looking pickup ever made.

“My Husqvarna 340 chainsaw is lightweight and inexpensive. Falling pine beetles have killed a lot of trees in our area, including big cottonwoods, so we’ve used this saw a lot to cut firewood. It also works good for removing tree limbs.

“My Makita chain mortiser is a big time saver. It lets me cut mortises quickly and accurately and is easy to use. It’s ideal for timber framing work.”

Makita cordless 2-speed reversible

0 Best Buys1 Worst Buy
Worst Buy
Brice Colvin, Camarillo, Calif. · Vol. 14, No. 1 (1990), p. 14

Brice Colvin, Camarillo, Calif.: Brice’s “worst buy” is a Makita cordless 2-speed reversible driver-drill, model 6012HD, which he uses around the home for lightduty drilling in wood, aluminum, and sheet metal. “After less than 100 hours of use the brushes split and began to disintegrate, causing the motor to fail, Since the motor is an integral unit with non-replaceable brushes, I had to buy a complete new motor assembly for $30. “My Makita recipro variable speed saw, model JR3000V, is another worst buy, It doesn’t have external brush replacement ports either so I anticipate another large expenditure when it fails.”

Makita router

1 Best Buy0 Worst Buys
Best Buy
Eugene G. Johnson, Rapid River, Mich. · Vol. 25, No. 1 (2001), p. 16

“Several years ago I bought a Makita router and it’s my best buy. I’ve put in hundreds of hours of use with it – all trouble-free. It’s light and easy to handle, and the bits for it are easy to change.”

Makita battery-powered wheelbarrow

0 Best Buys1 Worst Buy
Worst Buy
Wendy Wellnitz, La Crescent, Minn. · Vol. 49, No. 4 (2025), p. 13

“My best buy (Vol. 47, No. 4) of a Makita single-wheel, battery-powered wheelbarrow quickly turned into a worst buy when the tire slipped off the rim. One minute I was moving a heavy load of gravel, and the next I was looking at a collapsed tire.

“Luckily, I had picked it up used for $200. New ones are listed online for $899 up to nearly $1,500 with two 5Ah batteries and a charger. More common is a $1,400 or higher price tag.

“It was really handy for moving gravel and other heavy material. However, it was anything but handy when it came to getting the inner tube back in place and resetting the bead.

“I checked the Makita website, and unlike many companies, they provided no access to manuals or ways to get help.

“The motor is in the wheel rim, and there is no way that we could see to disconnect the power cable to the motor. We completely disassembled the machine, and a connection was nowhere to be found.

“Frustrated, we just scrapped it. Later, when talking with a tire repairman at our local farm co-op station, we mentioned the problem. He agreed that they were difficult to work with. He said he had changed tires on them in the past, but it wasn’t easy.

“We were told it can be equally difficult getting the drive wheel off of an electric bike.

“This was a learning experience for us. We now know to check on the potential maintenance needs of a battery-powered tool before buying. It’s also a good idea to at least get a buyer’s manual, if not a service manual, before buying. Finally, we learned to check with our co-op mechanics before trashing anything.”

Makita cordless tools work

1 Best Buy0 Worst Buys
Best Buy
Karl P. Retzlaff, Morris, Minn. · Vol. 33, No. 1 (2009), p. 14

Karl’s got a “beef” with cordless tools. “Why are replacement batteries for these tools so expensive and so hard to find? When the batteries on Coleman and Sears Craftsman tools wear out, you can no longer use the tools. Makita cordless tools work better. I haven’t tried Milwaukee or DeWalt cordless tools. I’m running out of room to store my useless Craftsman and Coleman cordless tools.

“I bought a 5-ft. Rhino brush mower to replace my 3-pt. mounted Woods belt-drive brush mower. The shear pin breaks if the mower barely touches the ground, and the pto shaft rattles terribly if I turn just a little. Finally I parked this mower in the trees and started using the old Woods mower again. The Woods mower has been a real time saver and is built well. I’d buy another one.”

Read every report in full

FARM SHOW has run reader Best & Worst Buys since the beginning.

Subscribe to FARM SHOW