Makita angle grinder
What FARM SHOW readers say · 9 Best Buys2 Worst Buys · Power & Hand Tools
Makita angle grinder
9 Best Buys2 Worst Buys“In 1982 I bought a 5-in. Makita angle grinder. For many years, it was my only grinder, and the way I weld, it got a workout. My welding hasn’t gotten any better, but I’m pleased to say that grinder is still going strong. With not one issue in 40 years, it’s definitely a ‘best buy’.”
“More than 30-years ago I bought a Makita 4-in. angle grinder. It has been used on at least three vehicle overhauls/restorations, cut through numerous boat floors, and cut tons of steel. I’ve replaced the power cord twice, but the little machine keeps on ticking away. By far my ‘best buy’.
“My 2014 Chevy Silverado 1/2-ton has 120,000 miles with only a front-end alignment, tires, regular oil changes, and routine maintenance. It’s a great product.”
“I’m well pleased with my 2014 Ridgid cordless drill and impact driver. It comes with 2 batteries and a charger, and it only takes about 15 min. to recharge the battery so I never have to wait to go back to work. Also, the charge lasts a long time.
“After 20 years I finally had to replace the brushes on my Makita hand grinder. I’ve successfully used this tool with a cheap wire cup brush to scrape old paint off a building before I repainted it. I’ve also used it on iron and to cut off rusted bolts and rivets.
“I had problems raising the deck on my Cub Cadet 1040 riding mower in order to keep it from scalping the grass. Also, the needle valve stuck open and filled the crankcase full of gas. I replaced it with an in-line shut-off valve, which solved the problem.”
“More than 20 years ago my dad bought a small Makita angle grinder, and we still use it regularly.
“I like my Schnee’s winter pack boots (www.schnees.com; ph 800 922-1562). I have one pair that’s more than 10 years old. I wear another pair from November through March for working with cattle, logging, hunting and snowmobiling. These boots are warm, dry and long lasting.
“Our 2000 Honda Rancher 350 2-WD 4-wheeler is on its third set of tires. I abuse the heck out of this machine but it keeps right on going. No problems.
“My wife loves her 2011 Speed Queen washing machine (www.speedqueen.com). It has all metal parts and gears instead of the plastic parts found on many other brands, and it’s comparably priced and has a better warranty. Our farm clothes are very hard on washing machines, but we’re happy with this one.
“In 1996 we bought our first new Maytag washing machine. The main bearings on it failed about the same day the warranty expired. A technician fixed the machine, but it broke down again within a year.”
“At one time my uncle used his 1962 Deere 4010 tractor to do all the work on his farm, doing big jobs such as plowing and harvesting. We bought the tractor used from him in 1997 and use it every day on our farm to do smaller jobs such as disking, planting, mulching, raking hay, pulling hay and silage wagons, and operating a round bale processor. The engine was overhauled long ago and the tractor now has about 16,000 hrs. on it. I’ve made a few minor repairs on it and painted it in 2012.”
A Skil 4 1/2-in. angle grinder rates as Charles’s “best buy”. “I bought this grinder after my Makita 4 1/2-in. angle grinder broke and use it all the time.
“The Makita grinder lasted only about three weeks and was my worst buy. I was using it to grind down a part on my manure spreader when the gearing inside the unit broke. I found out later that it was made in China.”
“We like the Morton building we put up in 1992.
“Also, our Makita 4-in. grinder is handy to use and built tough and is a best buy.”
“I like my 1998 Sears 3/8-in., 7.2-volt reversible cordless drill and driver. I also like my 1998 Makita 4-in. electric hand grinder. No problems with either tool.”
“My 10-year-old Makita 5-in. hand grinder works like new and is absolutely trouble-free. It’s small enough to maneuver in close quarters, yet it has enough power to remove material fast when necessary. It does a good job. I use it with a low-cost, softer wire cup brush to scrape or remove old paint. This type of brush works best because it tends to flatten out. I scraped an entire garage in only two hours.
“My best buy of all time was my 1945 Deere A tractor which I bought used in 1975. The only money I’ve spent on it was for paint and tune up parts. It always starts and never gets hot. It’s not a big tractor but it has enough power for my small operation and doesn’t burn oil to this day. I did have to put in a new flywheel seat last spring, but it cost me only about three dollars.
“My Remington chainsaw is my worst buy. I found out that when it needed repair work there was only one place in the entire state where I could get parts for it, and that was a small engine repair shop. It took forever to get it repaired and the parts were very expensive.”
“My Makita 4-in. angle grinder is a handy tool that has performed well. I use it a lot. It’s my best buy.”
“It makes more even heat and heats the water heater better with no more wood than other wood furnaces with box stoves I’ve used,” says Ronald, pleased with his Cozyburn outdoor wood furnace (Cozyburn Manufacturing Inc., Box 888, Arborg, Manitoba, Canada R0C 0A0; ph 204 364-2318).
On the negative side, he’s unhappy with his Makita 5-in. angle grinder. “The brushes burned out after one year. I replaced them and then the armature failed. This grinder cost $300 and had only a one-year warranty. So I bought a Craftsman for $100 that has a two-year warranty. It works better.”
Paul Hobbs, Kansas City, Mo.: “My Makita 4-in, grinder is easy to handle, compact, and has an overload shutoff. It’s a best buy. “My Homelite XL 14-in. chain saw is light and easy to handle. I’ve used it for six years and my only expenses have been fora new filter and new chains. “My Craftsman 3/8-in. electric drill is a worst buy. After I used it about 10 times it started making a howling noise. [ retumed it and got another one, but the same problem happened again.”
Own a Makita? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.