John Deere 4020 diesel
What FARM SHOW readers say · 62 Best Buys3 Worst Buys · Tractors
John Deere 4020 diesel
62 Best Buys3 Worst Buys“I don’t have anything to report on new purchases, but I have something from when I was growing up on a small family farm in Iowa. In the 1960s, my dad farmed with his main tractor, a Farmall Super M. That tractor had guts. We used it to plow on the farm. We had clay in the dirt, and we pulled a 3/14 plow. The tractor would go up hills with the plow turning over that clay and never complained.
“Then we traded it in for a new 656 gas tractor. The ‘new kid on the block’ couldn’t keep up with the old Super M. I think Dad regretted that purchase after he made it. A few years later, he decided the 656 needed to go, and we got a new Deere 4020 diesel. I thought I died and went to heaven. When you got up on the 4020, it was huge and a great tractor. However, I wished we still had the old Super M. She was a working fool.”
“My best buys are my 1968 and 1969 Deere 4020 tractors. This model is the most reliable tractor ever made by Deere—no computer. There are still many being used. If Deere made a new 4020, the line to buy them would be 10 miles long.”
“My 1967 Deere 4020 has been a best buy. Changing filters and overall service is easy.”
“I’ve had a few standout best buys in my 85 years. I used my 1969 Deere 4020 diesel for 46 years. It never needed motor work; only a clutch and the hydraulic pump fixed.
“My 1955 Ford 860 was used for 60 years with no major problems. It was a safe tractor for my wife and daughters to operate. It had standing room for passengers and was easy to get on and off.
“Finally, my 1999 Chevy S-10 had no major problems in 21 years. With care, it pulled 100-bushel gravity boxes to town.”
“My John Deere 4020 bought in October 1970 is still running strong.”
“My 1968 Deere 4020 diesel tractor, which I use with a 5-bottom semi-mounted plow, is worth more now than what I paid for it new.”
On the negative side, “Harbor Freight 4 1/2-in. angle grinders bend easily. There’s no bearing for the upper end of the wheel shaft, which causes the shaft to wear out prematurely.
“I was only able to use my Harbor Freight high lift jack once before the handle on it bent where it’s welded to the frame, making the jack unusable. Rural King makes a better and stronger jack (ph 800 561-1752; www.ruralking.com).
“My 1967 Deere 4020 equipped with a Powershift transmission is still dependable.”
“The 1968 Deere 4020 diesel tractor I bought used in 1980 has been trouble-free.”
“I would like to nominate FARM SHOW as our best buy. The ideas we have gathered over the years have saved us thousands of dollars and we’ve purchased products that we’ve never seen anywhere else. We really look forward to every issue.
“Our other best buy is our Deere 4020 diesel tractor which now has 34,197 hrs. on it. This tractor, which was previously featured in FARM SHOW, and still works every day. It runs like new and still has the original Roosa Master injection pump.
“Our Deere 8400 is also a great tractor with good visibility, plenty of power, and is a pleasure to operate. In more than 12,500 hrs. of operation, we have spent less than $8,000 on repairs.
“Finally, our Deere 332 skid steer is amazing. With 14,632 hrs. of operation, it has had no repairs to the engine. We test a used oil sample every year and it always shows absolutely no engine wear.”
“Back in 1968 my dad and I bought a Deere 4020 tractor equipped with a power shift transmission, and it’s still going strong with no major problems. Since then we bought a new Deere 6150 and while it’s a nice tractor and has more power, it’s still not a 4020. It doesn’t weigh as much as the 4020 so I added more than 1,000 lbs. per wheel, and it could still use more.”
“I bought my 1968 Deere 4020 new after coming home from the Army and over the years it has been a good tractor. I added a cab and larger front and rear tires for better flotation and traction. The engine, transmission and rear end have not been touched.”
“My 1969 Deere 4020 diesel tractor has about 9,300 hrs. on it but has required only normal maintenance and repairs. It has never been overhauled. When I bought it my dad thought I didn’t need to buy such a big tractor. However, later on he told me I had made a good choice and he borrowed it frequently.”
“I advertised for a late model used Deere 4020 tractor in good condition and ended up buying one that was made in 1972 and has a cab. One owner, with about 6,700 hours on it. Very nice.”
“The original hour meter on our 1970 Deere 4020 diesel tractor recorded 24,274 hrs. before it quit working. The tractor now has more than 32,000 hrs. on it, but after the original meter quit working we’ve had to install 3 different ones. The most recent meter lasted only 1,900 hrs. The original meter was made in the U.S.; the replacements were made in other countries.”
“In 1968 I bought a new Deere 4020 diesel tractor which worked great. We had a lot of ground to cover so the following year I bought another 4020. We used both tractors to pull 5-bottom plows. My son drove the 1968 model and I drove the 1969 model. His tractor outpulled mine in good dirt, but in heavy ground he had to drop down a gear so I took the lead.
“We finally found out why there was a difference in speed when we compared the 2 tractors gear for gear on the road. The difference was in the rear tire size - the 1969 model had slightly bigger tires which caused it to go faster. I still use both tractors and enjoy them.”
“The battery on my Deere 4020 gas tractor was always low so I had trouble starting the tractor. To solve the problem, I replaced the generator with an alternator and put an LP starter on it with electronic ignition. Now the tractor always starts right up.”
“I can’t justify spending the money on new tractors, but I’ll buy any reasonably priced used Deere 4020 to use on our 300-acre U-pick vegetable farm. I fix up the best ones and part out the worst. I think the 4020 is the best tractor Deere ever made.”
“In 1980 I bought a used Deere 4020 tractor with about 8,600 hrs. on it, and now it has more than 14,000 hrs. It’s a great tractor.”
“Our 2009 Kioti 30 hp, 4-WD utility loader tractor makes it a joy to do chores around our vegetable farm. We use it as a road grader, forklift, row tractor, front-end loader, a power source for splitting logs, raking hay and pulling wagons. It always starts right up and is easy on fuel and oil. Its all metal body construction makes it a good successor to our Mahindra 35 and an excellent companion to another bullet-proof tractor, our Deere 4020.”
“My all-time best buy is the 1938 Deere 10-in. hammer mill that my dad bought used several years ago for $30. It’s our Saturday ritual to grind enough feed for two small herds of beef cattle. Currently, we’re feeding 56 5-gal. buckets of feed each week using ground hay, corn, cottonseed meal, cottonseed hulls, and trace minerals. The hammer mill is pto-operated by a 1955 Deere 60 tractor, which is also a best buy. The hammer mill was manufactured the same year my dad was born. The last time we checked, genuine Deere parts were still available for the hammer mill. Dad replaced the hammers with disc blades off a disc mower because they were much less expensive. That’s the only modification we’ve made to the machine. It would be impressive to see the pile of feed that has come out of this mill over the past 20 years or so.
“Our 1964 propane-powered Deere 4020 tractor and 1965 diesel-powered Deere 4020 tractor, which we use in our hay operation, are both best buys. I think the 4020 is the best all-around tractor ever made.”
“Two years ago I bought a used 2001 Chevrolet 1/2-ton 4-WD pickup with about 198,000 miles on it from a local public works department. I drive this pickup on the road every day. It does a great job pulling trailers and is reasonably fuel efficient. No problems. I really like the tow/haul feature on the transmission.
“About eight months ago I bought a 1964 Deere 4020 tractor. I wish I had left the tractor where I found it. It ran good at the auction sale, but when I got it home it ran poorly. I put new spark plugs in, but it still runs poorly and it drinks gas like a fish. On the plus side, I really like the tractor’s powershift transmission.”
Gary owns three Deere 4020 diesel tractors and says they’re all “best buys”. His 1966 and 1969 models are equipped with syncromesh transmissions, while his 1970 model has a powershift transmission. “They’re the most complete tractors in every way. I use them to do light-to-heavy work and refer to them as icons. The three tractors have about 16,000 hours between them, with no problems that I couldn’t fix by myself. There’s not a tractor out there that will resell like these models. When new they sold for $7,000 to $8,000, but I can get $15,000 to $20,000 for them today.
“My 1968 Deere 6600 combine equipped with a diesel engine is still the sharpest combine in our area. It’s equipped with a 329 cu. in. diesel engine that’s easy on fuel. I painted the combine to like-new condition in 2007 and applied chip guard over some painted spots to keep the paint from wearing off. The combine is equipped with a 213 flex head and a 4-row corn head that’s set for 38-in. rows. They don’t build combines like this any more, and I like being able to do any repair work that needs to be done. No computers on this machine.”
Lawrence nominates his 1965 Deere 4020 tractor as his “best buy”. “I’ve never had a wrench on the engine nor has it ever been overhauled. A couple of fuel injectors were replaced. It has 5,980 hours on it but still runs good.”
“No problems with our 2007 Ford Fusion car. It’s comfortable and fuel efficient.
“My 1969 Deere 4020 diesel tractor is a best buy. It was our main tractor for 30 years while we were farming 200 to 300 acres of row and field crops. It was always dependable and required minimal maintenance, and it was also fuel efficient.
“Many newer products aren’t built with the same quality as 25 to 30 years ago. I fix most everything myself, but it’s hard to find parts for these newer products. And when you do, they’re expensive.”
“My 1971 Deere 4020 diesel tractor works great and has required only minimal repairs. It’s ready to go to work whenever I need it.”
“We use our Case 8850 swather to cut about 2,500 acres of hay per year and have had very few problems. It has about 3,200 hours on it, so we’re now starting to have a little trouble with the header.
“Our 1968 Deere 4020 tractor, which we bought used, is a best buy. We’ve had a frontend loader on it since 1974 and have used it to handle 1-ton bales all this time. The engine has about 9,100 hours.
“We have two International Harvester 1466 tractors, one 2-WD and one 4-WD, that together have 16,700 hours on them. They’ve done a lot of work but we’ve had to do quite a bit of repair work on them.”
“My 1968 Deere 4020 tractor equipped with a diesel engine and powershift transmission is by far my best buy. This tractor starts right up in cold weather with no ether and no glow plug. It runs great.”
“My 1964 Deere 4020 tractor has 15,500 hours on it but still runs like new. The engine was overhauled at 7,200 hours. I’ve had newer and older Deere tractors and all of them have worked great, but this one is special. It still gets the most use of any of my tractors.”
“My 1969 Deere 4020 tractor had a new engine and new paint when I bought it used about two years ago to plow up 40-year-old fescue sod. It starts easy even in cold weather and has a lot of power and traction. I don’t plan to ever part with it.”
“My 1972 Deere 4020 equipped with a wide front axle is a pleasant tractor to drive. It was the last year these tractors were built. It’s equipped with a powershift transmission and 95 hp diesel engine. It also has dual remote hydraulic outlets, a quick hitch, and hydraulic power brakes.”
“Our 1968 Deere 4020 tractor, which we bought used, is a best buy. We’ve had a front-end loader on it since 1974. We’ve used it to handle 1-ton bales all this time. The engine was overhauled at 8,900 hours.
“Our Case 1290 tractor, which we bought in 1986, has more than 10,000 hours on it yet the engine has never been overhauled. It’s a best buy. Our only problem was that the right final drive went out about 12 years ago.
“Our Case 8850 swather has about 2,800 hours on it. We use it to cut about 250 acres of hay per year with hardly any major breakdowns. We’ve custom cut a lot of acres with it.”
“My 1972 Deere 4020 tractor has more than 7,000 hours on it with no problems.
“My Reese mower is well engineered and cuts heavy hay, but the welding on it is bad. We almost need to keep a welder in the field every time we used it. We’ve repaired just about all the welds.”
“My 1999 Deere 925 mower conditioner is my best buy. I especially like the flail conditioner, which can pass objects through without damaging the machine. This machine just mows and mows without problems. It has held up well over thousands of acres.
“My 1966 Deere 4020 tractor is a best buy. It rarely has problems and is worth exactly what I paid for it six years ago.
“My 1999 Deere 6310 tractor is comfortable, quiet, and does a good job of handling our mower and round baler. The power quad transmission lets us work fast in the field. It lets me mow our field 30 minutes quicker than with my 4020, just because of its ability to easily and constantly change gears.
“My 2003 Vermeer 605XL baler makes a good bale and the pickup gets all the hay. However, it has had a lot of problems.
“My 2004 Vermeer WRX rake does a good job and is easy to adjust. However, it’s four real tires, a good paint job, and some better-grade bolts away from being a best buy.
“My Deere 1600 hydraswing mower conditioner never made it through a field without breaking down. The final blow came when we couldn’t get it unhooked from the tractor’s pto shaft, and we ended up having to take the pto shaft out of the tractor.”
“In 1965 I bought a new Deere 4020 tractor and it’s my best buy. I replaced the engine 20 years ago, but the rear end, transmission, and hydraulic pump have never been touched. Otherwise it has required only routine maintenance and replacement of belts, alternators, tires and batteries. Nowadays I use it mainly for loader work.”
“I own an outstanding 1966 Deere 4020 tractor that runs on LP gas. It has more than 13,000 hours on it but the transmission has never been repaired nor have I ever had to do anything to the hydraulics. The engine has been overhauled three times. The only problem is the main bearings are a little weak. They’re the same bearings used in the gas engine that comes with this tractor. The bearings should have been bigger, because LP gas results in higher compression.”
“My 1965 Deere 4020 tractor is my best buy. It had problems with the ignition starter, hydraulics, and radiator. Overall, though, it’s my favorite workhorse for work on hills and for hauling big bales. I wish the accelerator shifter wasn’t located between the dash and the steering wheel. It can be scary if you accidentally bump it while driving on hillsides. Sometimes the tractor dies and then the brakes and power steering quit working.”
“It’s a good and faithful tractor,” says Dorothy about her Deere 4020. “We also have a Deere 3020 as well as two International Harvesters. However, we like the 4020 best for general farming. The 3020 works best for feeding cattle but I wish it was easier for older people to get on and off.”
Gerald says his 1964 and 1969 Deere 4020 tractors are both “best buys”, as well as his 1962 Deere 3020. They’re all equipped with power shift transmissions. “When my children were home they helped with field work, fencing, rock picking, and feeding bales to cattle. I had to change the 24-volt system and harness on the 3020 because the generator was inadequate. An alternator has more output. We also put in a 12-volt starter.”
“I haven’t had any problems with my Vermeer 504 round baler or my Krone disc mower.
“My Deere 6400 tractor is powered by a 4-cyl. engine that’s very powerful. This tractor has 1,500 hours on it with no problems.
“The engine on my Deere 4020 tractor has about 9,000 hours on it but has never been overhauled. It’s a great loader tractor.
“My Isuzu Lil Pup pickup is tough as nails. It has 150,000 miles on it but has required no major repairs.”
“My best buy ever is my 1971 Deere 4020 tractor which I bought used. It has been totally reliable with no problems. I had a local Deere dealer check out this tractor before I bought it.”
On the minus side, he lists his 1997 Gen-eral Electric washing machine. “I’ve had to replace the motor twice and the water pump once.”
“It has unbelievable pulling power and fuel economy and is like having three vehicles in one,” says Paul, impressed with his 1998 Dodge 2500 4-WD pickup equipped with a Cummins diesel engine and 5-speed transmission. “It’s an excellent starter. No problems so far. I understand the company plans to introduce a quad cab pickup which will be equipped with a 24-valve Cummins diesel engine and 6-speed transmission. I’m looking forward to it.”
On the “worst buy” side, “I’ve had problems with my 1964 Deere 4020 tractor which I bought used with 7,000 hours. It has had a lot of electrical problems, and a hydraulic pump went out. Also, a spindle on the front axle broke. I replaced the axle with one off a 30 series tractor. I think the 4020 is a very overrated tractor. Later models were built better.”
Forest likes his 1998 Ford F-150 4-WD pickup with Goodyear tires. “I do a lot of driving and already have 60,000 miles on the pickup. I’m impressed with the Goodyear tires – they’re still holding up well. My other three pickups had General tires which generally weren’t good for more than about 12,000 miles.
“My 1966 Deere 4020 tractor equipped with a diesel engine is a best buy. It has a whopping 23,000 hours on it. I overhauled the engine at 7,000 hours and again at 16,000 hours. Two years ago I bought a 20-ft. Bush Hog mower to use with it. I’m well pleased with both the mower and the tractor. Even though the tractor is 34 years old, it pulls the mower very well. I mow 800 to 1,000 acres every year.”
“Our best buy is our Woods Dual 255 frontend loader equipped with an 8-ft. bucket and forklift attachment. The forklift attachment works great for loading round bales and pallets of seed.
“OurDeere 4020 tractor is also a best buy.”
Dick’s the satisfied owner of a 1966 Deere 4020 and a 1978 International1086. “The clutch on the 1086 is grabby, especially in reverse. Also the 3-pt. arm extenders - designed for easy hookup - are so tight that they’re almost useless.”
“It has 9,000 hours on it and the only troubles we ever had were minor, with the hydraulic pump and valve,” says Larry, well satisfied with his 1970 Deere 4020.
“I bought my 1968 Deere 4020 used in 1973. It’s a very dependable tractor and I’ve had few problems with it although I did replace the tractor’s front end. It has been a pleasure to drive ever since.
“My 1983 Killbros 250 gravity flow wagon is a best buy. No problems.”
“Our best buy is our 1970 Deere 4020 tractor. It has more than 7,000 hours on it yet the engine has never been touched. The clutch was adjusted once. It just keeps on running good year after year. “Our 1982 Allis-Chalmers M2 combine is one of our worst buys ever. The heater never has worked right and the air conditioner works for only about an hour at a time. It seems to stop working as soon as the service man is out of sight. I call this combine our ‘Choke-Up King’ because it plugs up so easily, even if we’re going only 3 mph in 12 to 15 bu. per acre soybeans. I’ve worked for hours at a time trying to unplug this big, lemon monster. Another problem is that it’s almost impossible to put fluid into the brake cylinder.”
Chuck’s “best buy” ever is his 1964 Deere 4020 tractor. “I bought it used with 3,000 hours and converted it from 24 to 12 volts. It looks and runs like new and I couldn’t be happier with it. I also own a Deere 7400 tractor which is more refined than the 4020 but not as good. It’s had a lot of problems. “My worst buy is my 1995 Honda Fourtrax Foreman 400 4-wheeler ATV. I traded in my Kawasaki 300 Bayou 2-WD 4-wheeler for it and I wish that I had it back. The Honda throws an incredible amount of heat on my left leg, almost more than I can stand. It also backfires frequently. It could use a quieter muffler. After one year I tried to trade the Honda back for another Kawasaki. However, my dealer wouldn’t give me much for it even though I bought it from him and was told that it was the Cadillac of ATV’s. However, if it doesn’t hold its value any better than this I won’t own it for much longer.”
“My 1966 Deere 4020 tractor is not necessarily my best buy, but it’s the closest to my heart. It was my main tractor for many years. It has been semi-retired for quite a few years although I still use it for loader work almost every day. It’s the only piece of machinery I ever bought that increased in value after I bought it.”
“My worst buy of all time was my Interna-tional Farmall 400 tractor. I always knew when I went to the field with it that I wouldn’t be able to stay out all day without it breaking down. “My 1991 GM 4-WD pickup is a worst buy. It had problems with the alternator, starter, cruise control, brakes, and transmission. Also, the paint started peeling off when it was only a year old and I had to pay $100 for a new paint job. The radiator was too small and would heat up and the controls didn’t work right. “My best buy was my Deere 4020 tractor. I could always depend on it. “I also like my 1996 Dodge 4-WD pickup. No problems.”
“One of my best buys of all time is my 1969 Deere 4020 tractor. I still use it. “My 1985 Ford Thunderbird is a best buy. I just traded it in for a 1997 Buick LeSabre which I hope will perform just as well. “My 1994 Ford F-150 pickup equipped with an extended cab pickup and 302 cu. in. engine has been trouble-free. It has 31,000 miles on it. “On the worst buy side I’m disappointed with my Deere 175 hydro lawn mower equipped with a Kawasaki engine. The body of the air cleaner warped at 20 hours. I had to buy an entire new air cleaner - element and all. It wouldn’t start in cool weather until I put an electric fuel pump on it and gave it a little ether. The idler bearings, which were made in Hungary, were poor. “My 1979 Datsun pickup got only 18 to 23 mpg. It burned oil and the exhaust valve seats came out at about 65,000 miles so I had to overhaul the engine. “MySearsCraftsman 9-in. hand grinder was a piece of junk. The armature fell apart but the company wouldn’t even provide a cost estimate on a new one before sending it so I put it in the junk where it belongs. I bought a Sioux grinder which I really like.”
Neil Smith, Battleford, Sask.: “We're very pleased with our Deere 4020 tractor. It just keeps on going and going, and there’s seldom a day we don’t use it, It has a Deere loader on it that’s just a marvelous piece of equipment, too.”
and it starts in any kind of weather.” Eugene Alt, Audubon, Iowa: Gene likes StaBil gas stabilizer. "I was told to use this product with my Homelite string trimmer. I've used it in the trimmer and also with my lawnmowers. I left gas and stabilizer in the tanks all winter long, The following spring they all started on the first or second pull. I was amazed, We also use it with our antique tractors."John Barnard, Malta, Mont.: “I'm pleased with my 1994 Farmhand XL 1340 loader. The bucket makes a straight level cut - there's no problems with one side digging in more than the other. It does everything the dealer said it would."On the negative side, "My 1992 GM 4-WD doesn't have nearly enough power. It doesn't do a good job pulling my 20-ft. livestock trailer."Bob Rea, Meridian, Miss.: Bob's impressed with TLC tire puncture seal. "Our small tractor and all three 4-wheelers experience flat tires almost constantly, This is primarily due to mowing CRP land which leaves many spikes from hardwood brush. This product has completely cured the problem for all four vehicles. "My Tye fertilizer attachment for no-till drills is my worst buy. Despite recommendations to the contrary, we added the optional fertilizer attachment to our no-till drill in order to get better control with the seed. It worked fine for a year, but there's no way to keep the fertilizer from affecting the rest of the drill. We had to remove it after the axle finally froze up."Ricky Downs, Winnett, Mont.: "My 1993 Westfield 9-ft., 8-in. dia. hydraulicdriven hopper bottom unloading auger is my best buy. The auger enables me to reach the bin auger with little difficulty. It had no problem delivering enough wheat to keep up with a 10-in. Hutchinson auger. It moves twice as much grain as T expected."Art Kohls, Ellsworth, Kan.: "Our best buy is our 1969 Deere 4020 with 9,000 hours on it. About all we've done is to change the oil.”
Ralph Brown, Edgewood, Iowa: “My 1993 Ford 3/4-ton turbocharged diesel pickup has a lot of power and performs well. I'm well pleased with it. » “My 1972 Deere 4020 diesel tractor had over 9,000 hours before the engine had to be overhauled. It’s a good all-around tractor.” Charles D. Corlew, Cunningham, Tenn.: Charles is impressed with his 1993 Bush Hog 3126 10-ft. brush cutter. “It's trouble-free and runs smooth, I can even mow the level parts of my yard with it. The double universal joint in front lets me turn orst Buys vious page) short. “My 1992 Bush Hog isn't built well. The blades are mounted too high and have warped. tried to remove them but couldn’t because the bolts weren't anchored in so they just spun. The rear wheel bearings weren't greased during assembly so they wore out and had to be replaced. I sent a registered letter to the company and they signed for it but they never responded. The gearcase cover consistently shook loose, causing grease to leak out. I was constantly losing the blades on the right side of the machine.”
Gabe Loeffelholz, Platteville, Wis.: “My 1986 Honda Big Red 3-wheeler is always reliable, winter and summer, It's been almost trouble-free over many hours of work and play.” Oliver Grandalen, Portland, N. Dak.: “My best buy after 42 years of farming is my 1972 Deere 4020 tractor. We resleeved it and put in new pistons two years ago with 8,000 hours on the tractor. It wasn’t using any oil, but we thought the engine had to have some wear.”
R.D. Fricker, De Valls Bluff, Ark.: “My best buy is a Long 1200 3-pt. backhoe that I bought used from a farmer who had used it on his Deere 4020 tractor. The tractor’s -high oil pressure and high volume of oil caused it to leak quite a bit of oil. I had the main valve rebuilt for $50 and replaced some hoses. I bought it to use on my Deere 2355 tractor, but might also use it on my Deere 4620. installed a ‘T’ in the hydraulic line between the pressure control valve on the tractor and the hydraulic cylinder valve and ran a hose from the T to a Prince RD150-16 adjustable 0-16 gpm flow control valve that I bought from Northern Hydraulics (ph 800 533-5545). I had to use the flow control valve because the backhoe uses only uses 8 gpm. The return line goes to a porton the hydraulic oil filter cannister. “Tuse the backhoe to dig ditches, remove stumps, and transplant small trees and bushes. I also use it to repair levees and to ( )\9.~2— #£=£pape cunw.ac Best & W ( drain rice fields.”
Oscar D. White, Burlington, Iowa: “My 1993 Deere 4255 tractor has only a few hours, but I'm well pleased with it so far. My only complaint is that it idles at 890 to 920 rpm’s. A linkage adjustment was made, but if anything the problem is worse now. I’ve had several Deere tractors over the years and they’re hard to beat. I’m sure some adjustment can be made.” Ronnie Roe, Junction, Ill; “My 1979 Deere 4640 tractor keeps right on going and still works as good as itdid when it was new. My Deere 4020 tractor has over 6,800 hours and is still going strong.”
Ronnie Roe, Junction, Ill.: “My 1979 Deere 4640 tractor keeps right on going and still works as good as itdid when it was new. My Deere 4020 tractor has over 6,800 hours and is still going strong.”
Rich Flees, Helenville, Wis.: Rich's 1966 Deere 4020 diesel tractor, equipped with a synchro-range transmission, is at the top of his “best buy” list. “We bought it 18 years ago and have used it hard for many different jobs with no major problems. It has been overhauled twice and got one new clutch butstill performs like new. It just won’t give up.”
Francis Baker, Sylvania, Ohio: “Our Deere 4020 tractor has over 12,000 hours and our Deere 4440 has over 6,000 hours. They’re both best buys. “Our 1985 Ford F-250 pickup, which we bought used last year, is also a best buy.”
Alonzo Gaubert, Piedmont, Okla.: “My 1966 Deere 4020 tractor has about 8,000 hours but still starts and runs good. It’s my all-time best buy.”
August E. Andersen, Long Eddy,N.Y.: “My 1971 Deere 4020 is the best tractor Deere ever made. “My worst buy is Onduline roofing installed on a 50 by 120-fi. barn. The paint came off after four years but the company said the coloring was not guaranteed. The rest of the roof fell apart within two more years. When I complained to the company, they sent me a complaint kit and I returned itto them with samples of the roofing. They said nothing was wrong with it. say that when you can see daylight through a roof, there's obviously a problem, We finally had to go through the state attorney general office to get.a settlement. I replaced it with a metal roof.” Bruce Eisenga, Marion, Mich,; A 1991 Ford 8630 tractor equipped with front wheel assist and power shift transmission rates as Bruce's “best buy”. “It's an excellent tractor. Has good power, is fuel efficient, and easy to drive. The power shifi transmission works great.”
Alfred Meyer, Chillicothe, Mo.: Alfred’s had good luck with his 1991 BluJet LandTracker 15-ft. implement caddy and coulter bar disk and 1991 Case-IH 5400 15-ft. no-till drill. “The drill and caddy are a dream to operate together. The LandTracker (Blu-Jet Products, Thurston Mfg. Co., Hwy. 87A, Box 218, Thurston, Neb. 68062) is built heavy and is nearly indestructible, It has both front and rear Cat. Ill. 3-pt. hitches that allow me to mount the coulter bar disk on the front hitch and the drill on the rear hitch. The drill is builtheavy and is easy to adjust. I really like its extra capacity and wide lids. “Our two Deere 4020 diesel tractors are also best buys. Both have over 6,000 hours and run and look like new. The best thing 44+«FC ARM CHOW oe 2 about them is that they’re tough enough to pull a heavy drill, yet nimble enough to chase cows.”
Arthur Kohls, Ellsworth, Kan.: “My 1969 Deere 4020 tractor is my best buy ever. It has 8,200 hours and I've changed the oil 82 times. It’s trouble-free.”
Jack Cecil, Mt. Pleasant, Tenn.: Jack nominates a 1972 Deere 4020 tractor and a 1975 Deere 2030 as best buys. “I’ve worked both of them hard with no major problems.”
Own a John Deere? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.