John Deere 4320 compact tractor
What FARM SHOW readers say · 6 Best Buys2 Worst Buys · Tractors
John Deere 4320 compact tractor
6 Best Buys2 Worst Buys“One of my best buys was a 2007 Deere 4320 compact PowrReverser tractor. I tuned it to 72 hp; it had 48 hp eight years ago. It’s got over 3,000 hard hours, and I’ve never replaced anything other than a water pump and the usual front wheel seals. I just got a Deere Z994R 60-in. cut diesel zero-turn. I love that thing.”
On the worst buy side is a 2024 DeWalt cordless weed trimmer. “I bought it a year ago, and the head kept discharging all the string. I couldn’t figure out the problem, so I bought a new head. After a couple of uses, I had the same problem. There doesn’t seem to be a solution to this issue. There’s just too much plastic from China.”
He bought a used 2005 Deere 4320 tractor equipped with a Bush Hog loader, with 185 hrs. on it. It now has about 600 hrs. “The tractor itself works great, but the loader had problems. I had to rebuild the hydraulic cylinders twice, and it looks like I’ll have to again. The Bush Hog dealer has no answers. A new cylinder from Bush Hog costs several hundred dollars, and I’m not sure I want to take another chance on buying one.”
“I bought a new Deere 4320 tractor in 2006 and used it to cut 2 1/2 acres of pasture and to till a 100 by 200-ft. garden. Once a year I also use this tractor in a local parade to pull a farm trailer made into a Christmas float with about 30 children on it.
“Last year on the way to the parade the tractor broke down about 2 blocks from home. I called our local Deere dealer where I bought it new for $32,096 cash. They picked it up and took it into town (2 miles for $125) and found out it had a bad fuel injector pump and camshaft. It cost $1,200 to tear the tractor down, and they wanted another $7,800 to fix it. They said they don’t make this engine any more.
“The tractor has only 180 engine hours on it so it isn’t even broke in, yet the warranty has expired. I’m 74 years old and on Social Security so I can’t afford to fix it. I thought I had spent my retirement money wisely to get a new tractor so I wouldn’t need another one in my lifetime.”
“My 2006 Deere 4710 48-hp tractor is the perfect size for my needs. I actually bought this tractor in 2008 with 123 hours on it. It had been loaned by Deere to the Kansas City Chiefs as a field tractor, and then sold to a local dealer here in Maine. This tractor works well in confined wooded areas. It’s low to the ground and is equipped with turf tires which provide excellent traction. No problems. I also own another 4710 model that I bought in 2005. Both tractors are powered by excellent Yanmar 4-cyl. diesel engines that run smooth and quiet.”
On the negative side, “My 2007 Deere 4320 tractor was noisy and leaked diesel fuel. Sometimes the turbocharger caused the tractor to accelerate by surprise and if I hit a bump loads of firewood would spill out. I traded it in favor of the 4710.”
“Our 1971 Deere 4320 tractor has almost 9,400 hours but still works great. We use it to pull 50 ft. of harrows in the spring, a job that it handles with ease. It’s also easy on fuel. This tractor was rolled once but we straightened out the cab and it has worked fine ever since. It’s the best tractor on our farm.”
A 1972 Deere 4320 tractor rates as Leo’s “best buy.” “I bought this tractor used in 1976 with 1,200 hours on it and used it for 28 years to pull a 21-ft. cultivator and 21 ft. of press drills hooked together. I also use it during the winter to feed my cows. Over the years I put two clutches in it. Now it has more than 14,000 hours on it but still runs perfect.”
“My best buy is my 1972 Deere 4320 tractor which I bought used in 1976. It still starts right up just like a Buick. In all the years I’ve had it I’ve never had to take the engine apart. I always keep the tractor in the shed whenever I’m not using it, and I always change the oil twice a year. Every oil change requires about 5 gallons of new oil. It uses a large, high priced, spin-on oil filter that’s three times as big as the filter used in the company’s 4020 tractor. I use the tractor to pull a field cultivator, grain drill, and 5-bottom moldboard plow.” “Here’s how I pull steel fenceposts. It consists of a 6 by 6-in. piece of 3/4-in. thick steel plate attached to approximately 2 ft. of chain with a hook on the end,” says Joe Eliker, New Madison, Ohio.
“The plate has a 2-in. wide slot in it that fits any T-post. You hook the chain up to a 3-pt. hitch or loader bucket. If you hook up close to the ground you can pull any post.”
Contact: FARM SHOW Followup, Joe Eliker, 408 E. Wayne, New Madison, Ohio 45346 (ph 937 996-1501). fax 515 622-3207; E-mail:
Jerald Campbell, Pierson, Iowa: “Our best buy is our 1988 Artsway 500 grindermixer. We use itto grind and mix more than 75 tons of feed per month, Our only expense has been to replace a chain and repair the scale. “Most of the time we use our Deere 4320 tractor to power the grinder. It’s also a best buy.”
Own a John Deere? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.