John Deere 3020 diesel
What FARM SHOW readers say · 16 Best Buys0 Worst Buys · Tractors
John Deere 3020 diesel
16 Best Buys0 Worst Buys“My Milwaukee 10-in. telescoping pole saw operates smoothly and has good reach and battery life.
“I bought a used 1968 Deere 3020 diesel. I probably paid more than it sold for when it was new, but I got a better tractor than anything else I could buy for the same price.”
“My 1966 Deere 3020 is a joy. I like the narrow front. It starts easily and is easy on fuel. I use it to mow, rake and bale.
“In 2020, I bought a Hobart stick welder at Rural King. I only did 1 lb. of small rod and melted the circuit board. Rural King wouldn’t refund, repair or replace it. I couldn’t get ahold of Hobart - their phone service is bad.”
“About 30 years ago I bought a used Jonserud 525 chainsaw which I’ve used to cut firewood and also brush when making ATV trails. The recoil housing on it broke a couple years ago and because the saw is so old, replacment parts were no longer available. Fortunately, my son went online and found a company that deals in old chainsaw parts (www.chainsawr.com; ph 802 533-2928). I was able to buy what I needed for $35 and get the saw running again.
“In 2002 I bought a used 1989 Polaris 250 Trail Boss ATV that I’m still using. I’ve replaced the starter and a broken motor mount, but otherwise this machine just keeps on going.
“In 1980 I bought a used Deere 3020 diesel tractor with about 2,000 hrs. on it. I’ve replaced the radiator, and rebuilt the water pump once and the starter twice, but otherwise this tractor has required only routine maintenance. I think the 3020 is one of the best tractors Deere ever built.”
“My 2005 Deere 9560 combine is easy on fuel and has a nice cab. It’s also fun to drive. I wish the company still made this combine.
“I love my 1972 Deere 3020 diesel tractor.”
“The engines on my IH 303 and 615 combines seem to run forever, and are simple enough in design that I can work on them by myself. I bought both combines used years ago and they’re still going strong.
“In my experience, Deere 3020 and 4020 series tractors equipped with the powershift transmission will run forever without any problems.
“Several years ago I bought a new Deere 275 9-ft. disc mower which turned out to be a piece of junk. It was welded together at the factory with the belt pulleys out of line, and as a result I had to replace several sets of $300 belts. I had a welding shop cut 1/2 in. out of the frame, which cured most of the problem. Also, the mower’s swivel shaft broke off, and I’ve had to replace several gears and bearings. I’ve spent more money on repairs than what I paid for the machine.”
“I like my 2015 LS 3033 33 hp., 4-WD loader tractor equipped with a 3-cyl. Mitsubishi diesel engine and 4-speed shuttle shift transmission (www.lstractorusa.com; ph 252 984-0700).
“My Deere 3020 is a super tractor. No problems.
“I use my 2013 Ferris 2000 series zero-turn riding mower on 5 different 1-acre yards. It’s an excellent machine.”
“I use my Ford 1720 4-WD loader tractor just about every day and it works great.
“My Deere 3020 is also a good tractor.”
“My 2002 Chevrolet Trailblazer is a wonderful vehicle. No problems.
“My Deere 3020 diesel tractor with power-shift transmission has more than 5,000 hours on it with no problems.”
“I bought a used Deere 3020 tractor equipped with a powershift transmission for my son and it works great. It had new tires and was ready to go, with no leaks anywhere. It has a lot of power for a tractor its size.”
“My 2001 Honda Foreman ES ATV, which I bought used with low mileage, is a great machine. It’s also fun to ride.
“My Deere 3020, equipped with a model 1530 loader, is a great tractor.”
“I like my 1970 Deere 3020 tractors. Over the past 15 years I’ve bought three Deere 3020’s. Two were equipped with power shift transmissions and the other with a Synchro-Range transmission. These tractors work great in hay fields because they have good brakes, excellent steering, and roomy, flat operator decks. I’ve put a lot of hours on all of them but they just keep on running, with little maintenance required. I wish the company made new tractors as good as these.”
“The gas engine on our Deere 3020 tractor was worn out so we replaced it with a new diesel engine that starts great even at temperatures down to zero and uses very little fuel. We’re well satisfied with it. It made a new tractor out of an old one. Now everyone wants to drive it.”
Two Deere 3020 diesel tractors - a 1969 and a 1970 - head Bill’s all-time “best buy” list. “Both of them have more than 6,000 hours. Over the years we’ve used them for cultivating, mowing, baling, hauling manure, powering augers, and a lot of other jobs. They’ve saved a lot of hours on our larger tractors and have had few repairs. I plan to use them for many more years.”
Bill Voedisch, Marine, Minn.: “My best buy is my 1993 Allied 594 loader that's mounted on a Deere 3020 tractor, They make a super combination. use it all year long to move snow and manure and to do landscaping work. It starts right up even in 20° below temperatures. “My worst buys are small machines powered by Briggs & Stratton gas engines. I’ve had brand new 4 and 5 hp engines fail on my lawn mower, sprayer, and rototiller, The problems were everything from a bad carburetor to dead ignitions. In the future won't buy anything powered by a Briggs & Stratton engine if T can help it.”
Olin Rairdon, Indianpolis, Ind.: Olin operates a stump cutting business using a Vermeer 2460 stump cutter and a smaller Can Do self-propelled model for grinding stumps that the Vermeer unit can’t reach. He uses a 1964 Deere 3020 tractor equipped with a Westendorf front-end loader to pull the Vermeer and hauls both stump cutters as well as the tractor on a 30-ft. gooseneck trailer between jobs. “The Vermeer stump cutter was originally powered by a Wisconsin 65 hp 4-cyl. gas engine. It kept failing every six or seven months because dirt got through the air cleaner filter. I replaced the engine with a Deutz 950 diesel equipped with an oil bath air cleaner and also mounted an in-line fuel filter in front of the fuel pump. I had the same problem with the 20 hp Kohler engine on the Can Do cutter so I replaced it with a Ruggerini MD 151-D 15 hp diesel engine equipped with an oil bath air cleaner. The engine is made in Italy and sold in the U.S. by Deutz. It developed an oil leak after the warranty expired. My dealer's mechanic found that the problem was caused by a crack in the block. He explained the problem to a Deutz representative who replaced the engine at no cost except for installation. “Engines used in dusty conditions shouldn't have dry-type air cleaner filters. My 1964 Deere 3020 tractor has an oil bath air cleaner and has been overhauled only once.”
LeRoy Toth, Elk River, Minn.: A Deere 3020 tractor equipped with a diesel engine and powershift transmission rates as LeRoy’s “best buy”. “Ithandles well and is economical for field work and loader work. There’s no better tractor in my opinion.” LeRoy’s “worst buy” is a Deere 338 baler equipped with hydraulic bale tension and bale thrower. “It ties only 80% of the time and bales aren’t uniform, Some are 30 in. long and some are 48 in. long. Some are light and some are heavy out of the same field. The bale thrower throws some bales in the middle of the wagon, some in front, and some right over the back. My dealer has been out at least 26 times trying to make it work right.”
Own a John Deere? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.