Great Plains fold-up grain drill
What FARM SHOW readers say · 10 Best Buys1 Worst Buy · Farm & Livestock Equipment
Great Plains fold-up grain drill
10 Best Buys1 Worst Buy“We’re pleased with our Great Plains 40-ft. fold-up grain drill. Both the dealer and the company made sure this drill performed like it should. They came back after the sale several times and checked over the drill themselves to look for any potential problems. This grain drill is well designed and built.”
“Our Deere 4430 tractor has more than 10,000 hours on it with only one engine overhaul. It’s one of the best tractors we’ve ever owned.
“We really like our Great Plains no-till 24-ft. soybean drill.”
John’s happy with his 1993 Great Plains 10-ft. no-till drill. “I have a small farm and this drill lets me try no-till at a reasonable price. Many of my fields are small with limited space to enter them. This size drill works great for me and for the tractor horsepower that I have. No problems.”
“It has performed flawlessly planting rye, grasses, and clovers as well as soybeans, oats and wheat into standing stubble and corn stalks,” says Ricky about his “best buy” 1996 Great Plains 10-ft. no-till drill. “It’s straightforward to operate and maintain, and to set up for different situations.”
“My worst buy is my 1994 Great Plains 10-ft. no-till grain drill which I bought in the fall of 1995. I like the drill itself - it does a good job of planting, saves time, and results in higher bean yields. I also believe wheat ‘winters’ better when it’s planted no-till because it doesn’t ‘heave’ so much in February and March. “I bought the drill from a dealer 95 miles away. When I got it home two of the seed-lock wheels had fallen off and were laying on the trailer floor. When I went to use the drill I found that I couldn’t adjust the seed rate because one of the plastic fluted seed metering wheels had been damaged. After fixing that problem I made only three rounds before it quit working because the clutch wouldn’t kick in. I took it apart and found that it was completely dry so I greased it. I made three more rounds, then stopped to check everything and discovered that I had lost two seed-lock wheels and mud scrapers. I went home and spent the rest of the day going over the drill with a fine tooth comb. “I called the dealer and was told ‘You should always check equipment over when you buy it’. However, he agreed to send me the parts that I had lost in the field. I received them, along with a bill which I didn’t pay. “When I planted my wheat field last fall I heard a squeaking noise coming from behind me, but the drill was still planting good. When I cleaned it up for winter storage I had my son oil all the discs. After he was done he said, ‘Hey dad, some of those opener discs are pretty loose.’ I checked some of them and found that about half of them were shot. “The dealer said the company would pay for only 40 percent of the cost because of the age of the drill. However, my drill has only about 600 acres on it because it was almost 2 years old when I bought it as a ‘leftover’ model. And I was told the discs would last 2,000 acres before needing replacement. “I think the company should make sure that its dealers do a better job of prepping these drills. I had to add 1,700 lbs. of weight to the drill so that it will penetrate my dry ground when the drill is one third or less full. I’ll add 400 more lbs. of weight next year. “All in all this drill is a great piece of machinery. I’d buy another one. But the problem with the opening discs is a good example of how a dealer can give a company a bad name.” Dan likes his 1995 Chevrolet K2500 4-WD pickup. “It’ll pull a 550-bu. grain load with no problem. It gets 13 mpg empty. It’s equipped with a new-style front suspension so it handles much better than older models. The only problem was with a front brake that occasionally wouldn’t fully release. The dealer promptly took care of it.”
“It has a lot of power and a nice cab with a good view, and it’s easy to shift,” says Stan about his 1989 Case-IH 7130 tractor. “My 1995 Great Plains air drill with cart doesn’t have the depth control or seed placement that I’d like, but it works okay.”
“My Case-IH 5130 tractor has only 86 hp but does the work of the 130 hp tractor that it replaced. “MyGreat Plains 10-ft. no-till drill does a good job in corn stalks and saves time. “My Hesston 12-wheel rake works fast. I can use it in the field at the same time as the baler. It leaves windrows so wide I hardly even have to weave the baler.”
A used 1984 Case 1896 tractor equipped with a cab and front wheel assist heads Delbert’s “best buy” list. “I bought it two years ago with only 374 hours on it. I really like the front wheel assist. “I like my 1987 Case-IH 2294 tractor which has 3,000 hours on it. We’ve spent less than $50 for repairs. However, I wish it had front wheel assist. “I like my 1992 Case-IH 7150 tractor but I don’t like the Goodyear 20-8-42 radial tires. The 7150 can go only a few feet in mud before it gets stuck because the tires aren’t self-cleaning. I’ll never buy a new Goodyear tire again. “I’m well pleased with my 1989 Great Plains 20-ft. drill. It does a good job and is well-built. “I also like my 1991 New Holland TR96 combine but I wish it had a bigger unloading auger. It has an 8-row head and in 150 bu. per acre corn it’ll fill a 270 bu. tank in only seven minutes. However, it takes almost three minutes to unload it. “I’m pleased with a used Case 870 diesel tractor I bought. It has 80 hp and burned 4 gal. of fuel per hour before I put a turbocharger on it. Now it has 125 hp and uses less than 3 gallons of fuel per hour. We use it a lot with a pto-operated agitator at our slurry tank whenever we haul manure. “I also like my new Hutchinson 8-in. dia. hydraulic swing-around hopper auger. One man can easily move it from bin to bin.”
Marshall’s impressed with his 1995 Great Plains 10-ft. no-till drill. “It does a good job of placing seed and is easy to adjust. Optional weight racks make it easy to get good soil penetration in tough soil conditions. However, it could use a better paint job. I keep the drill inside a shed but the paint job on the wheels, cast disc openers, and under the rear platform is poor and rust is beginning to show. In places the paint comes off in sheets.”
Don Fromm, Memphis, Mo.: Don nominates his New Idea Seed Boss air planter as his “best buy”. “It plants accurately and has the best seed metering system on the market. The monitor provides total control of the planter and lets me know exactly what's happening with each row. Some bolts came out of the axle when the nuts loosened up, causing me to lose a drive wheel. I also lost a fertilizer coulter, This happened in the first 200 acres, It indicates a lack of quality control at the factory. “My two Great Plains no-till grain drills doanexcellentjob. However, the seed press wheels are too small. They don’t work well when the ground is wet and I have to get in the field. A harrow would work better.” Melvin Roos, Havana, Ill..; Melvin’s pleased with his Ford F-7000 truck equipped with a Caterpillar 3208 diesel engine. “It’s the best cold weather starting engine we have. This truck has performed as we expected itto. Noproblems, It’s a great truck.”
Tom Traxler, Menomonie, Wis.: “It’s an excellent machine and makes beautiful stands,” says Tom about his “best buy” Great Plains 10-ft. no-till grain drill. “My Vicon 13-ft. diskbine with a 9-ft. crimper is a best buy. No breakdowns and it cuts fast and even. Allows hay to dry fast.” '
Own a Great Plains? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.