New Hol-land: what farmers say
12 reports in FARM SHOW · 12 Best Buys0 Worst Buys
New Hol-land 2450 haybine
1 Best Buy0 Worst BuysThey say their 1995 New Hol-land 2450 haybine is their “best buy”. “It handles smooth and lets us cut alfalfa fast, which is important when you have a lot of haylage to get in fast. It’s one of the best pieces of machinery we’ve ever purchased.”
New Hol-land 304
1 Best Buy0 Worst BuysWillard’s the satisfied owner of a New Hol-land 304 side discharge manure spreader. “We had been using a web-type spreader equipped with an endgate. However, the gate leaked before we got to the field and then it took forever to unload sloppy manure. With this spreader the manure is gone in a couple of minutes and is spread much more evenly. Makes it almost fun to haul sloppy manure. No problems at all.”
New Hol-land 40 silo blower
1 Best Buy0 Worst Buys“Our 1996 Massey Ferguson 390 front wheel assist tractor is a compact, powerful, handy tractor with good power steering. It makes an excellent loader tractor.
“Our New Holland 166 hay inverter is a neat piece of machinery and does a great job of gathering two or three windrows into one. Since using the inverter we’ve found that we need to make only 1/2 to 1/3 as many trips over the fields with our heavy forage harvesting equipment. Also, the inverter picks up far fewer stones than a rake does.”
On the minus side, he lists his New Hol-land 40 silo blower. “This 1,000 rpm blower was constantly plugging. We couldn’t solve the problem so we traded it in for the company’s model 60 blower. It delivers haylage into our 108-ft. high silo with ease.”
New Hol-land 499 hydroswing haybine
1 Best Buy0 Worst BuysGary’s had trouble with his 1991 Gehl 1060 forage chopper. “It’s a constant battle to keep this machine going. We’ve had a lot of problems with the metal alert unit. Last spring we had to replace all the bearings on the feed rolls. The bearings had grease fittings on them but there were no holes on some of them to let grease into the bearings. If there was a hole it was on the wrong side of the bearing. The company wouldn’t do anything about it.”
He’s impressed with his 1989 New Hol-land 499 hydroswing haybine. “It’s a high capacity machine that can be easily adjusted to lay hay in a wide swath for drying or in a windrow for making silage. We’ve replaced the guards and knives but haven’t had to make any major repairs.”
New Hol-land 660 round baler
1 Best Buy0 Worst Buys“Our New Hol-land 660 round baler has been dependable and is easier to work on than the New Holland 850 it replaced. Despite its faults, the 850 was durable and we didn’t have to replace many bearings.
“I wish all rotary mower manufacturers used the same type of spring-loaded fasteners that Hesston uses to attach its blades to the discs. These fasteners make it easy to remove, sharpen, and replace the blades. They never fail us. On the new Kuhn rotary mower, you have to remove a nut to detach the blade, and even then the blade can only be reused a limited number of times.”
New Hol-land 7060 Silage Special baler equipped
1 Best Buy0 Worst BuysPhillip bought an Anderson Hybrid round bale wrapper four years ago and a New Hol-land 7060 Silage Special baler equipped with Roto Cut two years ago. He’s happy with both of them. “The bale wrapper has saved me from losing hay cutting after hay cutting and results in a much better feed. We try to wrap bales that have 20 to 30 percent moisture, which makes great hay. I can’t build a barn for what it costs to wrap our bales.
“The New Holland 7060 baler has a lot of capacity and makes firm bales. I couldn’t live without the Roto Cut feature. It cuts the hay just enough so the bales pack tighter, and so that when they’re opened they tend to fall apart nicely for feeding.”
New Hol-land TC26DA HST tractor rides rough
1 Best Buy0 Worst Buys“My New Hol-land TC26DA HST tractor rides rough. The cab on my New Holland TD95D loader tractor needs more leg room. Also, the front upper portion of the cab restricts my visibility when I use the tractor to stack bales in our barn.
“My International Harvester Super H tractor is an all-time best buy. I often drive it in antique tractor parades.”
New Hol-land TC40 DA 4-WD tractor equipped
1 Best Buy0 Worst Buys“I’m totally satisfied with my 2004 New Hol-land TC40 DA 4-WD tractor equipped with a hydrostatic drive transmission and a 16LA front-end loader. I used it to build 2 ½ miles of trails, placing surplus soil removed from three ponds that were excavated by my Cat 215 DLC excavator. The Cat 215 excavator has 735 hours on it with no problems and is also a best buy.”
New Hol-land TL100A tractor
1 Best Buy0 Worst Buys“A couple years ago I bought a New Hol-land TL100A tractor which is my best buy. It’s easy to handle and is fuel efficient, and the cab offers a good view.”
New Hol-land model 1431 disk-type
1 Best Buy0 Worst Buys“It cuts low to the ground and is heavy-built,” says Don, pleased with his 1998 New Hol-land model 1431 disk-type mower conditioner. “It cuts fine grass 100 percent and is great in rocky conditions.”
New Hol-land baler equipped
1 Best Buy0 Worst Buys“I recently bought a mid-1980’s New Hol-land baler equipped with a Model 70 thrower that’s a ‘best buy’. I was going to keep my mid 1970’s New Holland 273 baler equipped with a Model 54A thrower. But the 311 had so much more capacity, ran so much smoother and made nicer bales, I knew I wouldn’t use the 273 anymore so I traded it off.”
On the “worst buy” side, he’s not happy with his Gehl 250 manure spreader. “The apron has a light shear bolt that breaks much too easily. To change apron speeds is also a hassle. You have to pull a rope on a cam about 4 ft. to change one gear. It gets real tiresome.”
He’s also disappointed in his DeLaval Harmony milkers with DeLaval pulsators. “The pulastors are built so flimsy they break easily if dropped or are bumped hard. The milking unit leaves milk in the bowls so when you switch to another cow, milk runs out of the inflations onto your leg.”
New Hol-land swather
1 Best Buy0 Worst Buys“It’s the most aggressive hay machine I’ve ever seen,” says Bruce about a 1994 New Hol-land 22550 swather. “It will cut heavy first cutting hay which is laid flat without plugging. It simply does an excellent job and we’ve had no trouble with it. “We’ve had trouble with the computer on a Deere4555 2-WD tractor we purchased with 440 hours on it. It shuts the hydraulic system down as well as most of the gauges. We also recently had to replace three injectors.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.