Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Brands › Snap-on

Snap-on: what farmers say

27 reports in FARM SHOW · 21 Best Buys6 Worst Buys

Snap-On tools

7 Best Buys1 Worst Buy
Best Buy
Paul W. Martin, Greenwood, Wis. · Vol. 47, No. 4 (2023), p. 12

“We’ve had a good experience with Snap-On tools. They’re built well, hold up to hard use, and have a lifetime warranty. We especially like the ratchets and wrenches.”

Best Buy
Cloverdale Repair, Greenwood, Wis. · Vol. 47, No. 2 (2023), p. 13

“We like our Snap-on tools because they are made in the U.S.A. with quality components and built to last.

“Milwaukee M18 battery impacts are also strong and last long.”

Best Buy
Charles Baldwin, Elizabethtown, Penn. · Vol. 39, No. 4 (2015), p. 14

“Over the years I’ve purchased several Snap-On cordless tools. I’m a professional mechanic so I use these tools a lot. My 3/8-in., 14.4-volt and 1/2-in., 18-volt impact drills work amazingly well, as does my 1/2-in. 18-volt drill. It runs smoother and has more power and torque than any cordless drill I’ve ever used. I’d recommend these tools to anyone.”

On the “worst buy” side, he lists Primecell battery service. “I sent a batch of batteries from several guys in our shop to this company for rebuilding, but when the batteries came back the guys all complained about the poor running time. I told them to follow the instructions provided and they did, but the batteries still wouldn’t last.

“I tried contacting the company, but they wouldn’t return my calls until I left a voice message saying that I would be calling the Better Business Bureau. A company rep then called me back and said my warranty had expired, and that they were going to turn me in for harassment. I tried to explain that I was trying to make sure our guys had done everything as instructed and that I had been trying to contact the company for more than 3 months. If the warranty had expired so be it, but I just wanted them to call me back and tell me. The company rep then hung up the phone.”

Best Buy
Mark Conyers, Weatherford, Texas · Vol. 31, No. 5 (2007), p. 12

“I’ve been using Snap-On tools for 30 years in trucking and farming and for motor racing service and repairs. They’re built with quality and never let me down.

“The Chicago Electric variable speed 3/8-in. drill and reciprocating saw I bought from Harbor Freight are my worst buys. The saw stalls constantly, and it’s difficult to cut anything other than the thinnest or softest materials. If I try to use the drill at slower speeds the motor literally smokes. I destroyed one motor while using a 3/8-in. drill bit at normal speed in only 1/8-in. thick mild steel. Fortunately the drill was under warranty each time, but a warranty is pointless if the tool can’t survive normal use.”

Best Buy
Bill Griffin, North Garden, Va. · Vol. 26, No. 3 (2002), p. 15

“I’m impressed with my Deere AMT 600 utility vehicle which I bought used. It’s one of the company’s earliest models and has a motorcycle front end. This machine has performed beyond my expectations in every way and has required no major repairs. I use it for hauling hay, wood, dirt, manure, rocks, and to tow my log splitter and a small trailer. It goes through mud and climbs hills with no problems. I like that it fits in the back of my pickup.

On the “worst buy” side, he lists Sears Craftsman tools. “They break easily. Here’s what happened to the tools I own. Open end wrenches spread open, rounding off the bolt head. The ends broke off screwdrivers. Sockets split. The end broke off my breaker bar. The pliers are too sloppy to get a good grip. I plan to buy Snap-On tools from now on.”

Best Buy
David M. Welling, Ridgeway, Ohio · Vol. 25, No. 2 (2001), p. 15

“My 2001 Dodge 2500 SLT pickup equipped with a 24-valve Cummins air-cooled diesel engine and 4-speed automatic transmission is my best buy. It has a lock-up torque converter and a 3:55 rear end gear ratio. The only problem was that it took a long time to get it. I ordered it in February 2000 but didn’t receive it until four months later. However, it was worth the wait. I really like the black-over-gray finish. I also like the vehicle’s power and torque. With all that torque and the anti-spin rear axle, I have to be careful or I’ll end up going sideways.

“Regarding Harbor Freight tools, you really have to watch what you buy. Some of the products are misleading as far as their claims of being made in the U.S.A. For example, I ordered a Hanson drill bit set. The index box was made in the U.S., but the drill bits were made in China and were of poor quality.

“I’ve owned Snap-On tools for more than 22 years and have never been disappointed with them. I’ve traded and upgraded toolboxes and tools over the years, both hand-operated and power models, and their trade-in value is great. I’ve used a 1/2-in. air impact tool for 20 years and it has never been rebuilt. I traded it for a new 2000 model and the dealer gave me $75 for it. Snap-On tools cost a little more, but in the end you don’t have a piece of junk when it comes time to trade or upgrade.”

Worst Buy
Don Lasee, Krakow, Wis. · Vol. 25, No. 2 (2001), p. 17

“A product called Astro Seal is my best buy. I used it to seal a weeping pto gasket on my semi tractor without having to do any draining or disassembly work. It seals through water or oil and doesn’t harden or crack. It works in temperatures ranging from 50 degrees below zero to 220 above. It’ll seal lead, asphalt, glass, wood, sheet metal, concrete, and all solid surfaces. Whatever you seal is paintable immediately. I liked it so much that I became a dealer.

“My Snap-On hand tools are my worst buy. I’v found Snap-On dealers to be extremely arrogant and they refuse to warrant their tools. Also, their polished wrenches may look impressive but they’re difficult to hang onto when you have oily hands. The company’s screwdrivers twist and their cotter pin puller bends. I’d rather have Sears Craftsman hand tools any day.”

Best Buy
Dave Welling, Ridgeway, Ohio · Vol. 24, No. 1 (2000), p. 15

“My 1988Ford Festiva car has more than 195,000 miles on it but still uses very little oil and has a good-looking body. It gets about 40 mpg.

“Snap-On tools and toolboxes are also best buys for me. They hold their value just like Deere tractors.”

Snap-on (general)

4 Best Buys0 Worst Buys
Best Buy
Ken Young, Brandon, Manitoba · Vol. 46, No. 3 (2022), p. 15

“In December 2020, I bought a Snap-on kit with 1/2-in. cordless impact wrench, batteries and charger (1,200 to 1,500-lb. model). This wrench slows down once the nut or bolt is loosened so it doesn’t go spinning out of control. The torque settings do seem to work. One battery will do a lot of work and easily lasts a long, hard day. It’s fairly heavy but that makes it more stable when being used. I’ve used it a great deal and am very satisfied. Battery tools are far superior to air tools for convenience and this one has exceeded my expectations.”

Best Buy
J.D. Greene, Bainbridge, Ga. · Vol. 37, No. 5 (2013), p. 14

“I like the fuel economy on my 2012 Case IH Magnum 210 tractor, and the quietness and quality of the cab. This tractor has a lot of power and shifts smooth. It has many small improvements over my Magnum 245 and 215 models, which are also good tractors. We use Diesel Exhaust Fluid urea additive with this tractor which definitely improves the fuel economy.”

On the minus side, he lists his Sears geared ratchet wrenches. “After limited use the ratchet box end on the wrenches began to strip out. I expected the company to exchange my wrenches at the store for new ones, but instead was told I’d have to send the wrenches back to the company. Now I buy my wrenches from Snap-On or Case IH.”

Best Buy
John D. Dewell, Scio, Ohio · Vol. 27, No. 6 (2003), p. 15

“I really like my 1993 Hardy outside wood burning furnace. I had a few problems with it which the dealer promptly corrected. We use it to heat our house and it does a wonderful job. We use it to burn everything, including old tires and tubes, old round bale bags, and garbage. It burns so clean we don’t even have to pay for a garbage service. We even use it to heat our drinking water. It works for us 365 days a year. “ sockets! From now on we’ll stick with Snap-On, Sears Craftsman, or Kobalt tools.”

Best Buy
Jerico Springs, Mo. · Vol. 11, No. 6 (1987), p. 13

Jerico Springs, Mo.: “I bought a 180 amp Lincoln welder in 1967 and it's been an all-time best buy. | run a tractor repair shop so it gets a workout. I'm also pleased with Sears Craftsman tools. They're built the best and replacement parts are easy to get. Snap-On tools are the worst, I'd break a ratchet every two weeks or so. The Snap-On dealer said he couldn't do anything for me. Sears ratchets last about a year doing the same work and when they finally get to the point where | can’t fix them, I get a free new replacement ratchet from Sears. Snap-On won't do that for me.”

Snap-On 1/2-in 18-volt cordless

1 Best Buy1 Worst Buy
Best Buy
Daniel Palmer, Kensington, Ohio · Vol. 31, No. 3 (2007), p. 15

“My Snap-On 1/2-in., 18-volt cordless impact wrench is built strong and lasts a long time on a single charge. I’m a mechanic at a Bobcat dealer and regularly use this tool on field service calls.”

Worst Buy
Jim Dannen, Hampton, Iowa · Vol. 22, No. 3 (1998), p. 15

A Lincoln 250 wire feed welder purchased within the last two years is one of Jim’s “best buys”.

“It’s a quality machine with a stronger arc than many other welders I’ve used,” Jim says.

On the negative side, is a Snap-On 1/2-in. dia. air impact drive. “It never had the power it was supposed to. I finally traded it off for a Mac and am real pleased.”

Snap-On 3/8-in drive impact swivel

2 Best Buys0 Worst Buys
Best Buy
Dustin Parson, Hudson, Kty. · Vol. 46, No. 1 (2022), p. 15

He’s pleased with his Snap-On 3/8-in. drive impact swivel impact base. “This swivel base has a great operating range. It will not bind even when hinged out all the way. I can put any 3/8-in. drive socket on it, which is much cheaper than buying a complete swivel socket set. The warranty is great and the tool holds up very well under heavy use.”

Best Buy
Jason Peterson, Boyceville, Wis. · Vol. 35, No. 3 (2011), p. 13

Jason’s impressed with his Miller 212 Auto Set welder. “This machine does a great job welding aluminum and steel. You can let the machine set the wire speed, or you can set it yourself.

“I bought my Snap-On 3/8-in. air drill to replace an Ingersol Rand 3/8-in. model. However, it had less power than the Ingersol Rand and even had less power than our cordless drill. So I returned it and rebuilt the Ingersol Rand model for $35, which saved me a lot of money.”

Snap-On 14.4-volt 3/8-in cordless

1 Best Buy0 Worst Buys
Best Buy
Paul Leavengood, Fresno, Ohio · Vol. 24, No. 3 (2000), p. 14

Paul likes his new Snap-On 14.4-volt, 3/8-in. cordless drill/driver. “Our son has one and we liked it so well that we bought one too. It has a lot of power for any job and goes a long time on one charge. It’s handy to use and I like not having to mess with an electric cord. We’re well pleased with it.”

Snap-on 36-in. indexable head pry bar

0 Best Buys1 Worst Buy
Worst Buy
Tim Weaver, Lititz, Pa. · Vol. 50, No. 1 (2026), p. 13

Weaver Metalworking Machinery manufactures 12-in. and 24-in. brake attachments for ironworkers or shop presses (ph 717-625-0302). They make bending 1/4-in. metal quick and easy. They feature a drop-in bottom insert for single V dies, or you can remove it for use with a 4-way die.

“We’re very happy with our Milwaukee 18-in. belt sander. It’s lightweight and very easy to operate.

“We’ve had issues with Snap-on’s 36-in. indexable head pry bar breaking. Snap-on makes great tools, but this one doesn’t hold up.

“I’m not pleased with my Umarex Synergis air rifle. It shoots 2 1/2-in. groups at 15 yards. I got an Air Venturi Avenge-X PCP, and it shoots 1/4-in. and 1/2-in. groups at 50 yards.”

Snap-On 3/8-in 14.4-volt long-neck ratchet

1 Best Buy0 Worst Buys
Best Buy
Mick Hartsock, Laurens, Iowa · Vol. 47, No. 2 (2023), p. 12

“There are a lot of hard-to-reach bolts encountered when working on combines. The Snap-On 3/8-in 14.4-volt long-neck ratchet (CTR767DB) has enough length to reach those bolts and good enough leverage to break them free. I use it more than I ever expected.

“I purchased the Milwaukee M12 Fuel 3/8-in. ratchet (2557-20) before the Snap-On because I use my Milwaukee impacts every day and they are great. The Milwaukee ratchet I bought is too short to bust nuts free and has no power to turn them. I used it a couple of times and haven’t touched it since.”

Snap-On MG1200

0 Best Buys1 Worst Buy
Worst Buy
Daryle Welker, Clifton Springs, N.Y. · Vol. 36, No. 5 (2012), p. 14

A 2005 Kubota ZD25F zero-turn riding mower equipped with a 60-in. deck rates as Daryle’s “best buy”. “It does a great job of mowing and saves me 45 min. every time I mow the lawn. Also, it doesn’t use much fuel.”

On the minus side, “My 2010 Snap-On MG1200 and MG725 1/2 and 3/4-in. air impact wrenches are both worst buys. I owned Ingersol Rand composite-style wrenches in the past, and they had more power and were quieter and much lighter.”

Snap-on SSDMRE4 pistol grip ratcheting

1 Best Buy0 Worst Buys
Best Buy
Stanley Bruce, Billings, Mont. · Vol. 46, No. 2 (2022), p. 15

“I bought a used Snap-on pistol grip ratcheting screwdriver (SSDMRE4) on eBay. I bought it after attempting to use about 10 other types of small grip ratcheting screwdrivers. It can be used with one hand in small spaces. Mostly I repair small, difficult-to-reach things or do stuff like repair damaged siding on my house. This type of tool accomplishes such work much more efficiently than anything else I have used.

“My 2020 Ativa 12-sheet Micro-Cut Shredder (A12MC19) worked for the first few sheets of paper. About the third time I used the shredder, I attempted to run through about 10 sheets of paper. The horizontal cross-cut teeth jammed with the fixed vertical teeth. I couldn’t get it unjammed. I donated the shredder to a recycling place and bought a vertical cut paper shredder – good enough for what I do.”

Snap-On Tools

1 Best Buy0 Worst Buys
Best Buy
Pat Kelly, Charlo, Mont. · Vol. 22, No. 3 (1998), p. 15

Pat’s “best buy” is a wire welder he bought 15 years ago from Snap-On Tools and manufactured by System Matics. “I’ve had absolutely no trouble with it in all the years I’ve used it in my farm repair and manufacturing shop,” he says. “I don’t think there’s any way it could be improved upon.”

Snap-On ratchet built

0 Best Buys1 Worst Buy
Worst Buy
George E. Lutgen, Jr.: Lowell, Ind. · Vol. 23, No. 3 (1999), p. 15

George has had good luck with his 1997 Stihl 066 chain saw equipped with an interchangeable 25 and 36-in. bar. “It’s easy to start, is lightweight and has plenty of power. It’s easy to change bars and chains, and the slack adjuster on the side to tighten the chain is easy to use.”

On the negative side, a 3/8-in. Snap-On ratchet built in a 1/4-in. flex head body is one of his “worst buys”. “The ratcheting head breaks every time you use it. My dealer doesn’t stock the replacement head so it’s been broken more often than not.”

Snap-On tire inflator

1 Best Buy0 Worst Buys
Best Buy
David M. Welling, Ridgeway, Ohio · Vol. 24, No. 6 (2000), p. 17

“My 2001 Dodge 2500 4-WD pickup equipped with a 24-valve Cummins diesel engine and 4-speed automatic transmission is my best buy.

“I like my Lincoln fully automatic air grease gun and my Snap-On tire inflator.”

Snap-on heavy-duty combination slip

1 Best Buy0 Worst Buys
Best Buy
William Watner, St. Marys, Kansas · Vol. 42, No. 5 (2018), p. 15

“In 2014 I bought a used 1995 Dodge Ram 2500 2-WD pickup equipped with a 5.9-liter Cummins diesel engine and 5-speed transmission. It has about 169,000 miles on it but so far has had only minor mechanical problems. The cab interior is in terrible shape as is the paint job, but that’s typical of these models.

“I recently purchased a Fluke T5-600 multimeter voltage and current tester (www.testequipmentdepot.com). It automatically measures AC and DC volts with precise digital resolution. At about $100 it wasn’t cheap, but it’s worth it. A seasoned industrial electrician recommended it.”

“In my opinion Victor brand mouse traps are the best on the market.”

“My Snap-on heavy-duty combination slip joint pliers are pricey but superior in quality and functionality. They come with diamond-serrated jaws that provide a better grip and grab effectively. A 3-position adjustable joint on the pliers provides a wider jaw spread for tough-to-get-a-hold-of jobs.”

Snap-On sockets

1 Best Buy0 Worst Buys
Best Buy
John Schmucker, Cashton, Wis. · Vol. 44, No. 5 (2020), p. 13

“My Snap-On sockets are the best I’ve ever used. These professional-level tools fit on snug and don’t slip like cheaper brands do. They cost more but come with a lifetime warranty. You get what you pay for.”

Snap-On wire welder

0 Best Buys1 Worst Buy
Worst Buy
William H. Braymen, Coin, Iowa · Vol. 28, No. 5 (2004), p. 13

William’s happy with his 1981 Ford 6700 tractor. “It just sips fuel compared to our other tractor. It has about 6,500 hours on it and is a pleasure to operate.

“My 1980 Ford F-150 XLT pickup has about 185,000 miles on it but still runs good and doesn’t use any oil.

“My 1984 Honda 200 4-wheel ATV is a best buy. We use it to spray, seed crops, and check and feed our cattle. This machine is easy on fuel.”

“My son has a Snap-On wire welder which is a worst buy. He can’t get parts for it and the dealer is no help. It will be the last Snap-On tool on this farm.”

Read every report in full

FARM SHOW has run reader Best & Worst Buys since the beginning.

Subscribe to FARM SHOW