John Deere 750 compact tractor
What FARM SHOW readers say · 26 Best Buys3 Worst Buys · Tractors
John Deere 750 compact tractor
26 Best Buys3 Worst Buys“My Deere 750 compact tractor has very efficient diesel power. I plow some and disc, as well as pull logs for firewood. I have a dirt scoop for the rear. When the power goes out, my PTO generator is very handy.
“I purchased a used Massey-Harris Pony tractor with a center-mounted sickle mower. It was advertised as perfect, and the pictures looked good. I paid to get it home, and it ran for a couple of minutes with a loud engine noise that ended up being the fan mount that bolted to the front of the engine. Someone had filled it with graphite to quiet it, but the fan was wobbling and almost hitting the radiator. It’s impossible to find new or used parts. The tractor wiring was a mess, the air cleaner tube was missing, and the carb leaked. The mower had a broken cast part. I had to sell it at a big loss. No more antique tractors for me.”
“Four years ago we broke a rockshaft on our Deere 750 no-till drill. The dealer ordered a replacement from the factory and promised a one-week delivery. I called once a week to check on the order status. On the fourth week a lady took the call and discovered that the part had never been shipped. She got things rolling, and a week later we got the part. However, the delay cost us a lot because that year we had an early frost and some of our later crops were damaged.”
“My 1997 Deere 750 no-till drill does a good job in moist soil types and requires very little maintenance.”
On the negative side, “My 1997 Chevrolet Sonoma 4-WD pickup equipped with a 4.3-liter V-6 engine got only 15 mpg and didn’t have enough power to do anything. The cab is way too small for more than two people.”
“I like my Mayrath 10-in. dia., 62-ft. long swing away auger. I had been using a grain leg to unload wet corn and it took one hour to unload 1,300 bu. With this auger I can unload the same amount in only 18 minutes. I had a couple of problems with the universal joint and with the gearbox. However, the dealer and the company took care of the problems.”
On the “worst buy” side are the replacement discs he bought for his Deere 750 grain drill. “After I put them on I planted just a few acres of wheat when I noticed that the blades were getting all nicked up - and we have very few rocks. I double checked to make sure I had put the discs on right. Then I mentioned the problem to my dealer and he said there were problems with some ‘soft’ blades and that he would replace them free. But what made me mad was that I had to take the discs off and replace them myself. It’s not a pleasant job.”
“It pulls easy and does a good job of placing seed in all conditions. It’s also almost maintenance-free,” says Jeff about his Deere 750 no-till drill.
On the negative side, he’s not happy with his 1997 GM Jimmy SLE. “When we drove it off the lot the cruise control didn’t work and it was in the shop for five days before they were able to find the problem.”
“It does a good job of metering seed for accurate planting,” says Jim about his Deere 750 drill. “After trying other types of drills, we came to the conclusion that you’ve got to match your drill to your soil type. The 750 is best-suited to ours.”
“My Deere 750 no-till drill works well in no-till beans. “My 1997 Ford F-150 4-WD pickup is a pleasure to own.”
“It does an outstanding job of planting in all tillage conditions, from conventional to no till,” says Robert, pleased with his 1996 Deere 750 no-till drill. “We used it for soybeans, grain sorghum, and wheat. It’s a typical Deere piece of equipment because it does the job, just like our Deere 7810 and 7410 tractors.”
“My 1994 JM Innovations mini-floater sprayer equipped with an MT3000 monitor is my best buy. Both the sprayer and monitor are accurate and save on labor, allowing us to go to a total postemergence weed control program. It’s one of the few products I’ve bought that was set up and ready to go without the operator having to make modifications or improvements to it. “My 1995 Deere 750 no-till drill is easy to operate and performs well under a variety of conditions.” On the “worst buy” side, “My 1993 United Farm Tools 15-ft. no-till drill wouldn’t plant with precision under any circumstances except in soft sand. The coulters and press wheels created a mess instead of a seedbed, making it impossible to achieve a uniform seeding depth. The seed population rate was difficult to set and wouldn’t stay constant so after I planted several acres I had to reset it. The company denied any problem with the drill. I traded it in for the Deere 750 and couldn’t be happier with it.”
“My Deere 750 no-till drill works great in all conditions.”
Hugh doesn’t like his 1992 Deere 750 15-ft. no-till drill which he bought used two years ago. “The problem is that it has 125 grease fittings and all of them are almost impossible to reach. I have to crawl under the drill between the ranks of openers. The same is true for the depth adjustments on the seed openers. Every time I have to service this machine I cuss the engineers who designed it. Also, the seed tubes plug up easily. I’m surprised that Deere even put its name on this machine.” Ed Swanson, Minnesota Department paying $45,000 to replace it. In this case, because the tractor was four years old and had 1,500 hours on it, a settlement may be harder to agree on.”
“It’s trouble-free and does an excellent job placing seed in all soil types and conditions,” says Ray, pleased with his Deere 750 no-till drill. “It has massive downpressure springs that allow it to hug the ground in uneven terrain. I mount it on a Mauer 3-pt. hitch which makes it easy to attach and detach the drill and also allows me to turn shorter in tight spots. “MyPardner 65 chain saw works good but has one problem - the needle valve adjustments on the carburetorstray from their ‘starting’ settings. Whenever I shut off the saw and restart, it floods. I have to constantly readjust the high-low settings in order to get it started. Sometimes it takes 20 minutes to reinstall the carburetor’s cover plate because I can’t find the small hole that the hold-down screw goes into. Once I have it running I make sure that I never shut it off until I’m done with the job.”
William J. Davis, Sheridan, Ind.: “I’ve had excellent yields from crops planted with my Deere 750 no-till drill,” says William about his “best buy”.
Bernard Roberts, Syracuse, Ind.: Bernard is pleased with the Deere 750 no-till drill he bought new in 1994, “In our variable and stoney soils, it outperforms all other brands we rented in the past.”
Robert Williams, Morral, Ohio: “My 1994 Deere 750 drill is built strong and works great for no-till. I plant at 7 to 9 mph and this drill puts the seed exactly where I want it. The only problem I've noticed is that you have to change the location of the openers over the rows on 30in. spacings to keep the gauge wheels from hitting stalks and inhibiting population in rows. It shows in the operators manual what openers to change.”
Greg Geiger, Morton, Ill.: “It's hard to fill this grain drill if you don’t have an auger system,” says Greg, who's otherwise pleased with his 1994 Deere 750 no-till grain drill, “It has great depth control at all speeds and produces excellent stands. “My 1994 White 6100 planter spaces seed accurately and also produces excellent stands. However, the transmission is somewhat clumsy to use and the hopper lids leak insecticide whenever the planter is folded vertically. “My worst buy is my Deere 350 mower. The cutter bar is difficult to raise into transport position - it should be powered by a separate hydraulic system. Also, it’s difficult to hook up the quick hitch to the drawbar lift mechanism.”
Ken Anderson, Trenton, Mo.: “I’m happy with my 1992 Deere 7240 15-in, notill planter. The vacuum row units do a precise metering job and depth control is excellent. Adjustments are simple to make. The optional cast-iron closing wheels close the seed trench in difficult conditions, yet also work fine in conventional tillage. I traded in a 1988 Deere 750 no-till drill for the planter. Due to its weight, the 750 did an even better job of soil penetration than the 7240, but for accurate seed placement and depth control there’s no comparison between the two machines. Later models of the 750 no-till drill have been improved. The transport axle pivots and closing wheel alignment on the 7240 could be redesigned, but overall it’s a well designed machine.”
John C. Smith, DeWitt, Iowa: “My 1994 Deere 750 no-till drill is a well-designed piece of equipment. It’s easy to operate and easy to fill.”
C. Tim Bishop, Queenstown, Md.: “My 1993 GM 2500 2-WD Suburban with a454 cu. in. engine is my best buy. I installed a set of Thorley headers equipped with a Walker Super Turbocharger muffler and a reprogrammed Hypertech computer chip. I got 11 to 12 mpg towing a 24-ft. race car trailer and 15 mpg without the trailer while hauling 7 passengers or 30 bags of seed corn. I'll pass up anything on the road and has the style and comfort of a luxury automobile. It also has great resale value. However, I wish ithad remote electric door locks and heated side mirrors. “My 1993 Deere 7200 6-row, 30-in. vacuum planter is equipped with Yetter residue managers. It's easy to adjust and plants accurately. Last year I had my best ae > orst Buys ious page) stand of no-till corn ever. “My Deere 9500 combine is equipped with Pixall snapping rolls that eliminate the need to chop corn stalks (Pixall Mfg., Clear Lake, Wis. 54005). The rolls have 10 sharpened, chrome-plated knife blades that intermesh to grip corn stalks and weeds, pulling them down through the snapper plates and crimping them for faster decomposition, We use a Deere 750 no-till drill to plant notill soybeans in untouched corn stalks the following year. Both the combine and drill do an excellent job and have good resale value.”
Dan Smith, Scottsburg, Ind.: “My 1992 Deere 750 no-till drill is my best buy. I’ve used it to seed 1,200 acres with no problems.”
Kenneth Frank, Minonk, Ill.: “My 1991 Deere 9500 combine is a pleasure to operate. It has a large, quiet cab and plenty of power. No problems. “The Deere 750 no-till drill we rented last year did a good job.”
Rob Helm, Kincardine, Ontario: “This drill has lived up to our highest expectations,” says Rob, pleased with his 1992 Deere 750 no-till drill. “Wehaven'thad any problems with seed placement. It plants ata consistent depth in both sandy and claytype soils. The only problem is that it’s difficult to service.”
Jeff Potter, Redwood Falls, Minn.: “Our 1992 Deere 750 15-ft. no-till drill is our best buy. We used it to plant 900 acres of beans in standing corn stalks. It has excellent “It has excellent down pressure. I think it could plant into blacktop.” down pressure. I think it could plant into blacktop. It’s easy to operate and rugged and was designed well from the ground up.”
Robert White, Mackinaw, Ill.: Robert's impressed with his 1991 Deere 750 no-till drill. “It does a great job and that’s a real compliment from someone who has a whole shed full of red machinery. One of our landlords has made trails in fields all over the farm as he drives to different areas. This drill places the seed at the right depth even on those trails,” Robert F. McGinnis, Poughkeepsie, N.Y.: “The steering is slower than on other mowers I’ve used,” says Robert, who’s otherwise pleased with his 1992 Cub Cadet 1440 garden tractor equipped with a 42-in. 2-blade high-vacuum mower deck. “It does anice job mowing without scalping, and the 5-gal. gas tank lets me mow all day without refilling. The new 14 hpengine by Briggs & Stratton is quiet, fuel efficient, and has plenty of power. Controls are handy and it rides comfortably. I like the tilt steering wheel and adjustable sliding seat. It’s a well built machine.”
Greg Miller, Freeport, Ill.: “My 1992 Deere 750 no-till drill does an excellent job of seed placement, yet leaves the ground in firm shape after going through corn stalks.”
Lawrence Schluter, Armstrong, Ill: A 1991 Deere 750 no-till drill heads Lawrence's “best buy” list. “The accuracy of seed placement is outstanding. We've used it to seed wheat and oats as well as soybeans.”
Walter Lamb, Olive Branch, Miss.: “My best buy ismy 1986 Deere 750 tractor. It’s a good compact 18 pto hp tractor and it handles almost any attachment. It has required only routine maintenance.” On the negative side, “I can’t find parts for my Hardee 25B sprayer so I have to fabricate them myself. There are no dealers in my area to help, Other than that it’s a pretty good sprayer.”
David R. Cook, Marshall, Mich.: “Our 1991 Hardi TR500 sprayer is a worst buy. Nozzles and nozzle screens plug continuously. Nozzle check valves plug when using dry fIowable materials. Self cleaning screen often plugs. If it does self clean, it sends dirt back into the spray tank. The electric valves open too slow for spot spraying herbicides. The pressure gauges are too ninate suys small and hard to read. Everything is metric and the plumbing is too complicated. When the tank has less than 50 gal. in it, the gauge won't show the volume. When there’s 30 gal. or less in the tank and the sprayer is on sloping ground, the pump will suck air causing the sprayer to lose pressure. It’s very difficult to finish a job without having a lot of leftover chemicals in the tank. “Our 1991 Deere 750 no-till drill isa best buy. We've used it to seed soybeans and wheat in both no-till and conventional till with excellent results. Iteven did a good job seeding beans into irrigated corn ground that hadn’t been touched after harvest. The beans made 53 bu./acre.” Myles C, Elsberry, Wausa, Neb.: “Our 1992 Case-IH 8480 baler is a best buy. It may not make the best looking bales in the world, but we've got the best quality hay we've ever had. We’ ve used it to make over 1,000 bales so far and have had only a few minor problems.”
David Peck, Oxnard, Calif.: “The 800Ib. 3-pt. lift arm limit is the only drawback to these small workhorses,” says David, who otherwise is pleased with his Deere 750 and 770 4-WD tractors. “I've got 100 acres of raspberries on narrow, trellised rows and I use these tractors to do all of my cultivating and spraying. After three years I’ve had no major repairs. The tractors are easy to get on and off and easy to drive. They do a surprising amount of work for their size and horsepower.”
Own a John Deere? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.