Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Brands › Century

Century: what farmers say

14 reports in FARM SHOW · 11 Best Buys3 Worst Buys

Century 50-amp plasma cutter

2 Best Buys0 Worst Buys
Best Buy
Elmer Pinkerton, Elmwood, Neb. · Vol. 30, No. 6 (2006), p. 13

“I got burned too many times when purchasing Harbor Freight products, so I told the company to remove my name from their mailing list so I wouldn’t be tempted to order more junk.

“My best buy is my Century 50-amp plasma cutter. It’s a 220-volt model that uses compressed air. It cuts right through steel almost a half inch thick and will cut car bodies clean, without distortion. It sure beats buying gas or having to use saw blades. However, beware of light duty models unless you’ve seen them work.”

Best Buy
Karl Retzlaff, Morris, Minn. · Vol. 25, No. 6 (2001), p. 15

“My Uni Hydro Ironworks 85-ton iron worker is my best buy. It’s amazing how many uses this machine has - everything from shearing to punching holes, and even making clean holes in rubber belting for stalk chopper and combine applications. The company also provides next day service if I happen to break a punch.

“My Century Mig 240-amp welder works great.

“I had some problems initially with my Century 50-amp plasma cutter, but it has worked well for the last year.”

Century 100 wire feeder welder

1 Best Buy0 Worst Buys
Best Buy
Joseph Murnane, Jr., Girard, Kan. · Vol. 23, No. 2 (1999), p. 16

“My 1997 Century 100 wire feeder welder is an all-around good, compact machine.”

Century 100 MIG welder

0 Best Buys1 Worst Buy
Worst Buy
Gordon T. Redel, Red Deer, Alberta · Vol. 23, No. 4 (1999), p. 14

“The worst welder I ever owned was a 1998 Century 100 MIG welder. I wanted to use it in various buildings but discovered it needs at least a 20-amp fuse. Most fuses in my buildings are 15-amp so you’re limited as to where you can use it. It actually wasn’t a bad welder for light work, but the wire kept balling up inside the machine. After I used it a couple of times, I traded it for a 1998 Lincoln 155 MIG welder at the local Princess Auto store where I bought the Century. The Lincoln’s a best buy. It’s just an all-around good welder.”

Century 105 90 amp dual purpose

1 Best Buy0 Worst Buys
Best Buy
Mike Pahls, Menifee, Calif. · Vol. 20, No. 2 (1996), p. 16

Mike’s “best buy” is a Century 105 90 amp dual purpose wire feed “Mig” welder. “This one makes my old ‘buzz box’ look like an antique,” he says. “It’s easy and convenient to use. Makes my welds look real fancy.”

Century 110 wire-feed welder

1 Best Buy0 Worst Buys
Best Buy
Dak. · Vol. 25, No. 6 (2001), p. 15

Donald nominates his Century 110 wire-feed welder as his “best buy”. “This welder is easy to use and does a great job even on heavy material. It works especially well on light tin and aluminum. It’s lightweight which makes it easy to move around.

“My 1977 Hydra Mac 8C skid steer loader is my all-time best buy. It’s a good machine and I couldn’t get along without it. The motor and hydros have been overhauled once. When I move to town it’ll go with me.

“My Lincoln 12-volt electric grease gun is my worst buy. I tried to use it on a zerk that wouldn’t take grease, but the pressure wouldn’t release and I ruined the gun’s end while trying to get it loose. It can’t even get grease into zerks that will take grease with a hand-operated grease gun.”

Century 170 wire feed welder

1 Best Buy0 Worst Buys
Best Buy
Donald Salmen, Wessington Springs, S. Dak. · Vol. 28, No. 2 (2004), p. 15

Donald nominates his 1992 Volvo semi tractor as his “best buy.” “I use it during harvest to haul products to market and during the off season to do commercial trucking. I’ve put more than 400,000 miles on it and have only had to replace a clutch and water pump. Normal maintenance is all it needs. The truck now has a total of 1,310,000 miles on it.”

On the minus side, “My Century 170 wire feed welder is difficult to set, especially when welding aluminum, which is the main reason I bought it. It takes a different sleeve when you’re welding aluminum than when you’re welding mild steel. I finally bought a separate handle so I wouldn’t have to change sleeves, which is a difficult job.”

Century 220 AC

0 Best Buys1 Worst Buy
Worst Buy
Calvin Naasko, Pelkie, Mich. · Vol. 24, No. 4 (2000), p. 16

Calvin’s disappointed with his Century 220 AC or 140 DC welder. “Whenever I use it to weld at the rated duty cycle, the DC mode burns out diodes like they’re going out of style. I’ve had to replace three diodes. The AC mode has to be set at 180 amps in order to burn a 1/8-in. rod.

“I like my 1960 Ford Major tractor equipped with a diesel engine, which I bought used in 1967. It has more than 3,600 hours on it but I still don’t have to add oil between oil changes. It also starts easy. I use it to power my sawmill and to operate a rotary mower. I use a Long 3-pt. backhoe with it which is also trouble-free.”

Ronnie Kennedy, Goldman Equipment, chase that I could justify.”

Century 2535 tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Neal Houston, Readsboro, Vt. · Vol. 40, No. 2 (2016), p. 14

“My 2003 Century 2535 tractor equipped with a C50 front-end loader works great. This is the same tractor as the Branson 3510 model. I use it in summer with a New Holland haybine and a New Holland 276 small square baler, and with a 6-ft. snowblower in winter. This tractor always starts and is very dependable. It still has the original battery.”

Century Mig 140 welder

1 Best Buy0 Worst Buys
Best Buy
Gary Ronan, Lindstrom, Minn. · Vol. 23, No. 3 (1999), p. 14

Gary’s impressed with his DR brush mower (Country Home Products, Vergennes, Vt.). “I have several acres of brush, sumac, and buckthorn and I had tried every way I could think of to get rid of them without success. Hand-held brush cutters were just too slow and sickle bar mowers couldn’t deal with the sumac, some of which is over 1 in. dia. But the DR mower cuts down almost everything I point it at. I use the company’s stock blade on it. They offer a 5-lb. blade but I haven’t had to use it. I bought what the company now calls their ‘Classic’ model. However, next time I’d get their gear drive model because it has a reverse gear which would be nice to have from time to time.

“My 1997 Century Mig 140 welder is a best buy. It’s a 110-volt model which works great as a spot welder. One negative is that most of the welds it makes have the appearance of chicken droppings. I’ve also used the company’s 220-volt models with no problems so I suspect that the appearance has to do with the 110-volt power.”

Century Mig 240-amp welder

1 Best Buy0 Worst Buys
Best Buy
Karl Retzlaff, Morris, Minn. · Vol. 25, No. 6 (2001), p. 15

“My Uni Hydro Ironworks 85-ton iron worker is my best buy. It’s amazing how many uses this machine has - everything from shearing to punching holes, and even making clean holes in rubber belting for stalk chopper and combine applications. The company also provides next day service if I happen to break a punch.

“My Century Mig 240-amp welder works great.

“I had some problems initially with my Century 50-amp plasma cutter, but it has worked well for the last year.”

Century cordless rechargeable 900

1 Best Buy0 Worst Buys
Best Buy
Gary Zimmerman & Sons, Holton, Kan-sas · Vol. 27, No. 2 (2003), p. 15

A Century cordless rechargeable 900 amp, 12-volt portable power source called the Outpac rates as Gary’s “best buy”. “It works faster than using jumper cables to boost a dead battery and can even be used to move seasonal vehicles that we don’t leave batteries in all year long. It also works good for operating flashers whenever we tow or haul a disabled vehicle.”

Century air compressor

0 Best Buys1 Worst Buy
Worst Buy
Wally Holter, Billings, Mont. · Vol. 44, No. 3 (2020), p. 12

“I had problems with a Century 21-gal. air compressor I bought from Harbor Freight. It wouldn’t build pressure anymore because the reed valve in the compressor broke. Harbor Freight didn’t have parts anymore so I went to Amazon and found them. The repair was easy to make after watching a YouTube video. The compressor is back in service.”

Wally nominates his 2019 Toyota Highlander as a “best buy”. “It’s not too big, not too small, and economical to operate. Good reputation for resale but I think we’ll have it for a long time.”

Century heavy duty

1 Best Buy0 Worst Buys
Best Buy
John G. Ruff, Logan, Kan. · Vol. 37, No. 6 (2013), p. 12

“Back in the mid 1970’s I bought a used Century heavy duty, 295-amp arc welder. It was an earlier model with 3 different arc level settings and was only an AC welder. Several years later I replaced it with a DC welder that had 2 different arc level settings. I put the DC converter box on it a few years later but never installed a high frequency converter box.

“I used this welder a lot for repair work and for building things. Of all the equipment I’ve bought over the years, nothing has saved me more money than this welder. All I do is plug it in and turn the switch on. It came with a 20-year warranty – 5 years for continuous welding. I’ve had to replace the ground clamp and the electrode holder a few times, and a few years ago I finally had to replace the cables. They still worked, but I didn’t think they were safe to use any more.

“The only other repair I’ve made to the welder was to replace the main switch and one bolt. I wrote to the company telling them I had bought the welder used, and asked them to send me a bill for the new switch. I got the switch but never got the bill, and I know this welder was more than 20 years old at the time.

“The only limitation is that I have to be near a 220-volt outlet to use the welder, but that’s hardly ever a problem. Instead I just bring whatever I’m welding to the welder. Inconvenient, yes, but cheaper than hiring someone to do the welding for me.”

Read every report in full

FARM SHOW has run reader Best & Worst Buys since the beginning.

Subscribe to FARM SHOW