John Deere 4440 tractor
What FARM SHOW readers say · 15 Best Buys3 Worst Buys · Tractors
John Deere 4440 tractor
15 Best Buys3 Worst Buys“I like my Massey Ferguson 135 diesel tractor, Deere 4440 tractor, Gnuse 3-pt. mounted forklift, Honda generator, and Stihl chainsaw. They seldom break down and are easy to repair.”
On the negative side, “Hands down, our worst buy was a Staber clothes washer. It didn’t clean our clothes, and maintenance was also a problem. We had to replace the bearings, pump, a hose, pulley, belt, and motor, and we had electronic problems.
“Replacement parts for this machine are ridiculously expensive. For example, the pump is imported from Italy and the belt that drives it is one-of-a-kind and is available only from the company. Every time I call the company they accuse me of oversudsing, which seems to be the explanation for all the failures on this machine. Also, the company isn’t helpful about how to stop the machine from jumping around and making a lot of noise. Toward the end, the struts needed to be replaced; however, the frame was rotting out so instead we got rid of the machine.
“I got holes in my clothes from the very first time I used this washer. I think the door design on the basket was to blame. It was a stainless steel basket that came with a 20-year warranty, but it was already rusty after only 4 years.
“I now own a Speed Queen clothes washer which I bought used. I replaced the pump on it for $40 and the belt for $20. Best of all, now my clothes are clean again.”
“I think my 1980’s Deere 4440 tractor is one of the best tractors Deere ever built. Routine maintenance is all it has ever needed.”
A 1982 Deere 4440 tractor rates as Bryce’s “best buy”. “It has more than 10,000 hours on it with only a few minor problems. Always starts.”
“I bought a used 1980 Deere 4440 tractor with about 7,000 hrs. on it, and the first year I had to replace both wheel rims. Also, the hydraulic pump leaked, and the top of the radiator expanded. At 8,200 hrs., a bearing on the transmission’s low range went out, and the transmission wouldn’t shift into any gear. To fix these problems I had to spend $4,400 worth on parts and $3,800 on labor. Also, the lines on the air conditioner rusted out, and I had to rebuild all three of the tractor’s hydraulic couplers.”
“I’ve been impressed for a long time with my 1980 Deere 4440 tractor. We used it to do all our fieldwork for the first 10 to 12 years. When my son bought a bigger tractor I mounted a Deere 740 front-end loader on the 4440 and used it that way for about 10 years. Now the 4440 has about 26,500 hours on it, yet the engine has never been touched. We use this tractor to do all our baling and over the years have worn out 3 sets of tires on it.”
In 1983, Gary bought a 1980 Deere 4440 tractor used with 1,200 hours on it. “This tractor now has almost 8,000 hours on it but has required only minimal repairs, and the engine still doesn’t use a drop of oil. Even though I do a lot of loader work with this tractor it still has the original clutch. Looks and performs like new.
“My 1993 New Holland 415 discbine is my worst buy. It worked well for two years, covering a total of about 700 acres. Then the same splines in the transmission gearbox sheared off. We got it fixed and two hundred acres later the same problem happened again. The machine was still under warranty so the company paid for it again. One hundred acres later the same shaft failed a third time. Every time this problem happened we lost about a week of downtime. We finally traded the machine in for a Deere 935 discbine, which has worked a total of about 3,000 acres and still works perfectly.”
Ed’s the pleased owner of a 1981 Deere 4440 tractor. “We’ve never touched the engine even though it has more than 8,000 hours on it. It doesn’t use any oil and runs just as good now as the day we bought it.
“My 1994 Convey All drill fill auger is poorly designed and is my worst buy. The slide cover that’s used to clean out fertilizer was difficult to move and had a weak handle that would bend. As a result I had to use a hammer to close the slide.”
Tom has had good luck with his 1996 Dodge 3/4-ton pickup, putting 136,000 miles on it in dusty, rough conditions and mud.
However, he does have one complaint. “They should put a better air filter system on the engine. It’s definitely a Mickey Mouse set-up. The second week I had it I got dirt in the engine so I took it back to the dealer. He told me Dodge sometimes had trouble getting the air filters sealed and that a little dirt wouldn’t hurt anything. I told him it certainly doesn’t do any good, either.”
Tom added extra leaf springs to the truck’s suspension so it rides more like a 3/4-ton pickup.
Another of his “best buys” is a Deere 4440 tractor he bought new in 1981. “We haven’t had any trouble with it in thousands of hours of use.”
“I’m well pleased with my new Kongskilde 3500 23-ft. tandem axle cultivator. It’s equipped with light H clearance tines, single point depth control, goosefoot teeth, KNA arms with rolling harrows, and a 5-bar front. It does excellent work and doesn’t plug up easily, and the tines are well spaced. It makes the best seedbed we’ve ever had. “We’ve had a lot of problems with our 1991 Deere 4440 tractor. The starter is underpowered and has difficulty starting the tractor. Another problem initially was that the lights would quit working at night every few minutes and I had to sit and wait 10 minutes or so before they came back on. Also, the heater and radio didn’t work. Eventually we discovered the problems were due to an improperly tightened power bar connection under the dash cowling. “The windshield shattered while my other son was using the tractor to incorporate herbicides. The next year I was using the tractor to chisel plow when the front end shot over to the right. The hub bolts had sheared off on the right rear wheel - the axle was turning but the wheel wasn’t. The shear bolts had discoloring that showed they were defective. I called the dealer and he said the shearing problem was our fault. He finally ended up paying half the repair cost. “The seat has a lever for controlling the ride from soft to hard, but this tractor rode like an old steel-wheeled wagon no matter where the lever was set. New parts were installed to try to improve the ride but they didn’t help. Finally it was determined that the adjustment lever rod was defective. “The cab leaves a lot to be desired because it’s small and hard to get in and out of. My sons and I have all hit our heads several times on the rear window while turning around to back up and hitch up to an implement. This cab is made for 5-ft. tall, 100-lb. people, not 6-ft. 3-in., 200-lb. people. It does have a lot of power but it burns a lot of fuel. It also has a poor steering system that lets it wander all over the road. This tractor has been a real pain for five years.”
Alan’s the satisfied owner of a Gnuse 3-pt. mounted loader bucket. “It’s built heavy and can be hooked up to a quick hitch. Works great for digging out tile stand pipes and is the best thing for snow removal I’ve ever seen. “I’m well pleased with my two Deere 4440 tractors as well as my Deere 4455 and 7800 tractors. They’re reliable and have made my job a whole lot easier.” He’s not as happy with his 1996 Kinze 2500 8-row planter. “I had trouble with oil-impregnated bushings that are used to turn the insecticide boxes on and off. They turn so hard that the main planter shaft twisted off instead of the cotter key that should have sheared. I have a lot of friends who own the same planter and have the same problem. It has caused me a lot of downtime. Otherwise I like the planter, especially the fold-down markers, the top drive, and the simplicity of design. It’s amazing how what appears to be a small problem can turn into a big headache when you’re trying to get a crop in.”
Alan’s impressed with the Selectro row shutoff he bought for his Case-IH planter (Selectro Co., Box 226, Avon, S. Dak. 57315). “I farm on contours so I have a lot of point rows, and with no-till I don’t cultivate so I have to be able to shut off the planter on point rows. The row shut-off lets me stop planting as I enter point rows. It saves seed and prevents overpopulation of the crop. I still cultivate end rows to eliminate double planting. “My 1980 Case 2290 tractor is my worst buy. The rear end and transmission each went out twice. All of the steel hydraulic lines broke and I lost 20 gallons of oil every time a line broke. Also, the fan went through the radiator. After the warranty expired I traded it in for a Deere 4440 tractor. The Case company spent over $6,000 on repairs during the warranty. They closed several stores which doesn’t help for service.”
“Our 1994 Case-IH 7130 Magnum tractor is our best buy. We bought it used with 300 hours and now it has over 2,000 hours with no problems. It’s our most economical tractor.
“Our worst buy ever was a 1981 Deere 4440 tractor equipped with a powershift transmission. We had it for four years and put 1,500 hours on it. The biggest piece of equipment it pulled was a 21-ft. Deere disk, but it still went through five different transmissions.”
Two of John’s “best buys” are a 1979 Deere 4440 tractor and a 1993 Deere 3950 forage chopper. “The tractor has plenty of hydraulic power, shifts easily, and is a pleasure to drive,” he says. “The design of the forage chopper is simple, making it easy to maintain. It does a great job chopping material.”
Wyatt Priestley, Greenfield, Tenn.: “T've had very few problems with my Deere 4440 tractor. It’s reliable and does everything we ask of it.”
Bryan Gibson, Gormley, Ontario: “It's the best tractor I've ever owned,” says Bryan about his 1980 Deere 4440 tractor. “It has 4,600 hours and has done every job on our farm. It’s gone through two water pumps, two alternators, two sets of batteries, one neutral start switch, and a pair of front tires. Other than that, it's been trouble-free. “My 1990 Yetter 6600 RT coulter cart with cultivator-packer that I use to pull a 3pt. grain drill simply didn’t work. It was shipped withoutsetup instructions and short on parts. Once in the field I knew why only two units had been sold in Ontario up until that time. From front to back it was poorly designed. The hitch wore out after only 300 acres. The packer was so heavy it pushed dirt in frontof it and the tractor couldn't pull it. After two years I gave it to a dealer for a nominal fee. Now he can’t sell it.”
Keith Lilley, Otego, N.Y.: “My Deere 4440 tractor has lots of power, starts good, and hauls loads up or down hills with ease.”
Roger E. Schnell, Amboy, Il.: Roger is the owner of a 1991 Chevrolet K2500 3/4ton, 8,600-Ib. capacity heavy-duty pickup. I's equipped with a 350 cu. in. engine and 4-speed automatic transmission, GR-24516 tires, and has a rear axle ratio of 4:10 to 1. “Everything about it is fine except for the fuel economy. We get 10 mpg on short trips and maybe up to 12 mpg on long trips. Big semi trucks get nearly as much mileage pulling 72,000 Ibs. of gross weight.” On the "best buy" side is a 1979 Deutz DX-140 tractor bought used with 3,000 hours. "After rebuilding the fuel pump and injectors we're very pleased with it . The 140 hp engine is very easy on fuel and the cab is comfortable. The entire tractor is designed well, The best part was that it cost $10,000 less than a comparable Deere 4440 tractor.”
Kenneth Rickels, Mendenhall, Miss.: “I bought a used Deere 4440 tractor with cab and air conditioning in 1986, and it’s a best buy. “I heartily recommend the Deere 245 quick-tach front-end loader that I bought several years ago. I couldn't do without it. I use the bucket to haul manure, dirt, trash, etc. I use the forks to pick up small logs, brush, tree limbs, and to lift posts ouf of the ground, also use it to haul, lift, and stack 1,200 to 1,400-Ib. bales in our shed and to move gates and hay feeders, When we built our new house we used it to lift bundles of shingles up to workers on the roof, and when we built our hay shed we used it to lift building materials, tin, etc, made a pallet that mounts on the loader or on the rear hay lift so that when I’m building or mending fence I can carry wire, stretcher, nails, and tools.”
Own a John Deere? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.