Miller: what farmers say
34 reports in FARM SHOW · 33 Best Buys1 Worst Buy
Miller portable welders
4 Best Buys0 Worst Buys“I’ve had many Ford pickups over 60 years. I drove a 2002 F-250 SuperCab with a 5.4 engine and an automatic transmission. In 175,000 miles, I never touched the engine or transmission. Both were dry with no leaks. I sold it in 2024. It now has over 300,000 miles and is still going. People tell me this is unreal. I still drive Fords. Treat them like a good woman, and they’ll stay by your side.
“FARM SHOW’s ‘Best, Worst Buys’ section is a best buy. I’ve avoided some bad buys and found some good ones by reading it.
“Mahindra tractors have been good buys. I bought my first in 2002 and now own two. With regular service, they keep going.
“I’ve been using Miller portable welders for 50 years. I went to them because Lincoln didn’t have AC for hand tools.
“On the negative side, anything I’ve ordered off Facebook has been junk, or I never received it, even though my credit card was charged. There’s no way to contact them.
“I bought a hydraulic and cable lift for a pickup or trailer bed from Northern Tool. I didn’t open the box for a year. When I went to assemble it, the packaging didn’t include a base section. I went back to Northern Tool, and the manager told me they had stopped carrying those. They wouldn’t give me my money back even though I had my receipt. I tell everybody to beware of Northern Tool.”
“I’m 80 years old and have been retired for 17 years, so I haven’t bought any major equipment lately. However, we still live on the farm and have saved several items from the good old days. All of these machines continue to serve us well, and in addition they keep a lot of good memories alive. Once upon a time, they were all best buys.
“The machines include a Grasshopper mower with an 18 hp Briggs & Stratton gas engine; an Allis Chalmers 720 yard tractor with a 20 hp Onan engine; a Miller portable welder; and a series of Bobcat skid steer loaders, each one better than its predecessor. The newestone is a 742 model. We’ve also saved several tractors - a 1958 Case 900 B, a 1949 unstyled AR Deere, a 1946 Farmall H, and my favorite, a 1949 Oliver 88. It was ahead of its time and was equipped with live hydraulics, pto, and a smooth 6-cylinder engine. I added a homemade 3-pt. hitch to make it even more useful.”
“I bought my Miller wire welder two years ago and it’s my best buy. It’s a 250-amp vintage model. I’ve used it both to repair equipment and to fabricate parts. It works good at either low or high settings. Miller makes quality products.
“My worst buys are recent General Mo-tors products. I’ve owned more than 12 new or used GM vehicles during the last 35 years and they were all built with quality. However, in the last few years the company has lowered its standards. GM vehicles and parts now are sub-standard, in my opinion. Another problem is that you can’t always order them according to your needs and specifications.”
“My 1997 Case-IH 900 planter will plant under any conditions except for extremely muddy ground.
“My Miller AC-DC welder has a lot of power.”
Miller Bobcat portable welder
2 Best Buys0 Worst Buys“My 2002 Miller Bobcat portable welder is always ready to go. No problems.”
“My 1998 Miller Bobcat welder started leaking oil at the main seal after 16 hours of use. I took it back to the dealer and didn’t get it back for two months. Luckily I didn’t need the machine when it was gone.”
Miller Bobcat 225 welder generator
2 Best Buys0 Worst Buys“My 2005 Miller Bobcat 225 welder generator is my best buy. It sure came in handy two years ago when Hurricanes Katrina and Rita caused our electric power to go out.”
“I’ve welded everything from sheet metal to 1 1/2-in. thick steel with my 1995 Miller Bobcat 225 welder and it has performed beautifully. It’s equipped with a generator that allows me to take it into the field for performing jobs such as operating a grinder, etc.
“I’m impressed with my 1997 DeWalt 9.6-volt cordless drill. I’ve used it to drive more than 200 screws without having to recharge the battery. It comes with an extra battery which is nice to have on hand.
“I have a complaint with SearsCraftsman tools, particularly their screwdrivers, breaker bars, and ratchets. Recently it seems that they’re making these tools thinner and with less steel than the original ones. I’ve had to exchange a 1/2-in. breaker bar three times in one month. The screwdriver tips break with just the slightest use, and I’ve had more than one ratchet come apart in my hand. It’s a good thing these tools are guaranteed, but it’s still a hassle to have to drive back and forth to exchange them.”
Miller Bobcat 250 engine-driven welder
2 Best Buys0 Worst Buys“My Miller Bobcat 250 engine-driven welder works great for stick welding.”
Christian likes his 2007 Miller Bobcat 250 engine-driven welder. “It has performed flawlessly both for welding work and for generating auxillary power to operate shop tools. I use it on my truck in my welding business.”
His 2007 Harbor Freight sheet metal cutter rates as a “worst buy”. “This metal cutter is advertised to cut 16-gauge steel, but it wouldn’t do that for me. Even when I used more air pressure and cfm’s than required it would only ‘nibble’ an inch of metal at the most without locking up. It does cut 18-ga. steel really well.”
Miller 130 wire feed welder
1 Best Buy0 Worst BuysLarry’s 1999DeWalt cordless drill is one of his “best buys”. “It has lots of power and I like the keyless chuck and 1-hour quick-charge batteries. I also like the 1/2-in. chuck and the variable torque settings. I haven’t used another electric drill since I bought this one.”
Another of his “best buys” is a 1998 Miller 130 wire feed welder. “It’s a 120-volt, 130-amp welder weighing just 85 lbs. so it’s very portable. I use it both in my shop and in the field, powering it with a 4,000-watt portable generator I have in my truck.”
Miller 150 230-volt wire feed welder
1 Best Buy0 Worst BuysGene’s had good luck with his 2003 Miller 150 230-volt wire feed welder. “I use it to weld mostly sheet metal, but the wire feed will handle mild steel up to 1/4 in. thick.”
Miller 150-amp welder
1 Best Buy0 Worst Buys“My Sears Craftsman 18-volt cordless 3/8-in. drill-driver is my best buy. It has a lot more power than the 9-volt model I had previously owned. The chuck works good, and the reverse button doesn’t get in the way of the trigger grip.
‘My 1946 Miller 150-amp welder is a best buy. It has worked well all these years with no problems. I replaced the cables only once.”
Miller 150 Tig suitcase welder
1 Best Buy0 Worst BuysMark likes his Miller 150 Tig suitcase welder. “I’ve used this welder to build a trailer and a dragster. It operates off either 110 or 220 volts and burns hot enough that I can use it to weld steel tubing and other thick metal. On heavy material I just make more than one pass.”
Miller 172 Mig welder
0 Best Buys1 Worst Buy“It has more than 300,000 miles on it but is still going strong,” says Louis, happy with his 1969 Ford Bronco equipped with a 302 cu. in. engine and heavy duty suspension.
“My Miller 172 Mig welder is my worst buy. The wire feed on it never worked right, even after I made several trips to the dealer. I finally junked it out and bought another brand, which works fine.”
Miller 212 welder
1 Best Buy0 Worst Buys“I bought a Hobart Handler 210 welder several years ago from Northern Tool. It cost just under $900 shipped to my door. I’ve run a few 11-lb. spools of wire through it with no problems. It’s a versatile, rugged, dependable welder that’s easy to use. I’ve used it to weld everything from 20-ga. sheet metal to 3/4-in. thick steel plate. I know I’ve exceeded the duty cycle on a few 90 plus degree days but have yet to kick in the thermal overload circuit breaker.
“My friend bought a Miller 212 welder (without the spool gun) for quite a bit more than I paid for the Hobart, yet he likes my Hobart better. We took the outer cases off both units and found they’re virtually identical inside since Hobart uses Miller components. Hobart’s customer service is excellent as well. Consumables can be purchased at TSC or any welding supply shop, which is very convenient. The spool gun works well for aluminum, too.
“My Harbor Freight milling cross vise is useless. I don’t expect much from Harbor Freight tools, but this tool is bad even by their standards.”
Miller 212 Auto Set welder
1 Best Buy0 Worst BuysJason’s impressed with his Miller 212 Auto Set welder. “This machine does a great job welding aluminum and steel. You can let the machine set the wire speed, or you can set it yourself.
“I bought my Snap-On 3/8-in. air drill to replace an Ingersol Rand 3/8-in. model. However, it had less power than the Ingersol Rand and even had less power than our cordless drill. So I returned it and rebuilt the Ingersol Rand model for $35, which saved me a lot of money.”
Miller 235 Millermatic wire welder
1 Best Buy0 Worst Buys“I’ve used my Miller 235 Millermatic wire welder for several years and have found it to be a real time saver for repairing and building trailers and wagons, etc.
“I like my Weslo inversion À ex system. It’s a table that tilts you back and holds you by your feet. I had trouble with my knees and back and was on two different pain pills for six months. They helped somewhat. But after I bought the À ex system the pain disappeared, and I was able to stop taking pills. You can buy them at Walmart for as little as $99.”
Miller 250 amp
1 Best Buy0 Worst BuysJohn’s happy with his Melroe Bobcat 773G skid steer loader and a Miller 250 amp Bobcat engine-drive welder. “Both of these machines were expensive up front, but I wouldn’t farm without them. We use them almost every day. The skid loader has run trouble-free from day one and has required only routine maintenance. We’ve used the welder to repair many cultivators in the field. It’s a real time saver because we don’t have to waste half the day just getting the machine moved back to the shop so we can repair it.”
Miller 252
1 Best Buy0 Worst Buys“I really enjoy using my dual gun mig welder. It’s a Miller 252 with a mig gun for large wire spools and a hand spool gun. You can be set up for mild steel on your main gun, but also set up for aluminum with the spool gun and gas hookup. You can switch to aluminum or stainless steel in an instant. It has a place to hold 2 gas bottles and is excellent for a small fabricating shop where you need to be flexible.”
Miller 300/200 ac/dc welder
1 Best Buy0 Worst Buys“I like my Miller 300/200 AC/DC welder. It has more DC power than others in its class and performs well.
“My Delta crossbed toolbox is my worst buy. The latch on it broke after about two weeks and the dealer wouldn’t do anything about it. I e-mailed the company but got no response.
“Farm Works software is also a worst buy. It’s expensive and hard to set up. Once you’ve made a mistake there’s no way to correct it.”
Miller Blue Star 2E portable
1 Best Buy0 Worst BuysGregory builds custom iron corrals and pens for farmers, ranchers, veterinarians, etc, and says his Miller Blue Star 2E portable DC welder is his “best buy”. “For three years during the fall and winter months I’ve used it 6 to 8 hours straight every day. It reminds me of a Timex watch - it just keeps on going. I’d buy another one. “I also like my Accu-Strike welding helmet with chin-activated lens. “My worst buy is my 1982 Case 2290 tractor. “The transmission never shifted properly. The tractor went through two rear ends in 1,800 hours even though I never over-pulled the tractor. After spending almost $11,000 on repairs I finally gave up on it. I replaced it with a Case-IH 7130 Magnum which is 10 times the tractor in every way.”
Miller Econotig
1 Best Buy0 Worst Buys“My worst buy was a Quonset-type garage from Pioneer Steel. The building collapsed under the weight of a foot or so of snow. When I called the company they told me that the model I bought was meant for the prairie, not for upstate New York, and that it was my fault for buying that model. When I ordered the garage I called the company and told them where I was planning to build it, and they said this model was the right one. Now they’re passing the buck to me. The building is less than five years old and has already begun to rust. Now I have to bulldoze it. The company was willing to sell me another garage at a discount. You’d think a company from Canada would sell buildings that can handle snow.”
On the “best buy” side, “My Miller Econotig is my favorite welder. It’s so versatile that I can weld almost any metal up to 1/4 in. thick with it, without the need for water cooling equipment.”
Miller LP furnace
1 Best Buy0 Worst Buys“We replaced our 18-year-old Coleman furnace, which was still working fine, with a 95 percent efficient 2011 Miller LP furnace. We installed it last September and have already seen a dramatic reduction in propane use. We’re very happy with it.”
Miller MillerMatic welder
1 Best Buy0 Worst Buys“It’s an easy machine to operate and set up,” says Scott about his 2001 Miller MillerMatic welder. “No problems. I’d buy another one in a minute.”
Miller Millermatic 130 welder
1 Best Buy0 Worst BuysGary likes his Miller Millermatic 130 welder, a 115-volt, wire feed demonstration model that he bought in 1995. “It’s a top brand name that weighs a hefty 73 lbs. and has a cast aluminum drive system rather than the plastic kind and a built-in gas solenoid valve. I bought this welder to do jobs between my arc welder and acetylene torch outfit. So far I’ve used it only with a flux cored wire so I can’t weld thin sheet steel without burning through it. I plan to install a gas conversion kit and use solid wire and try this for welding thin sheet metal.”
Miller Millermatic 90 wire welder
1 Best Buy0 Worst Buys“I’m well pleased with my 1993 Miller Millermatic 90 wire welder. It’s a light duty, 115-volt MIG welder that works well on 20 ga. through 11 ga. or 1/8-in. thick steel. It also does a respectable job on 3/16 and 1/4-in. thick steel if it’s grooved before welding. It’s set up to use .023 in. LR708-6 wire and argon/CO2 shielding gas.”
Miller Power Max 30 120
1 Best Buy0 Worst BuysBalton’s satisfied with his Miller Power Max 30 120 to 230-volt plasma cutter. “We were building a welding trailer and wanted to add a plasma cutter. We found this unit is easy to operate. It uses little air and has been useful on a variety of steel cuts.”
Miller Spectrum 625 plasma cutter
1 Best Buy0 Worst Buys“My Miller Spectrum 625 plasma cutter cuts up to 5/8-in. thick steel, and my Millermatic 250 Mig welder welds up to 1/2-in. material. Both work great.
“My Northern Tool 200 amp AC stick welder and my 140 wire welder were both worst buys.”
Miller Spectrum 875 plasma cutter
1 Best Buy0 Worst Buys“The Miller Spectrum 875 plasma cutter cuts very well. I got it from Amazon in four days when dealers said it would take six months or more to order one.
“The HP OfficeJet Pro 8025e printer would not work out of the box. Staples would not give our money back. They said we had to get it from HP – no luck.”
Miller Trailblazer portable welder-generator
1 Best Buy0 Worst Buys“My 2008 Miller Trailblazer portable welder-generator has far exceeded my expectations. I use it in my welding business where I build custom cattle facilities and make repairs to farm equipment. This welder-generator has an infinite heat range adjustment so I can use it to do all types of stick welding. It’s the only machine I know of with two generators - one for welding and one for powering grinders and other tools. I use it every day. It’ll run about 16 hours on 12 gallons of gas. I’ve owned three other portable welder-generators, but this one is by far the best.”
Miller plasma cutter
1 Best Buy0 Worst BuysLynn’s the owner of a 2003 Case 60 XT skid steer loader as well as a Hick hydraulic rotary tree saw that mounts on the skid loader (Hick Fabrication, Berryton, Kansas ph 785 862-8603). He says they’re both best buys. “The tree saw is easy to maintain and cuts scrub trees like crazy. The skid loader runs great and has a lot of power.
“I’m also well pleased with my Miller plasma cutter.
“We have a 1953 Farmall Super M loader tractor equipped with a live hydraulic pump that drives off the timing gear. The problem is that we were always breaking the timing gear when lifting heavy loads. To solve the problem we had a machinist cut the center out of a good timing gear, leaving about one inch of the original gear. He then machined out a solid steel hub and bolted the new hub to the original gear. We haven’t had any problems with it since.”
Miller digital
1 Best Buy0 Worst Buys“I’m pleased with my Miller digital Elite welding helmet. It’s a little pricey but it’s very handy. It has a cutting mode for use with a torch or plasma cutter, a grind mode for grinding work, and variable shades for welding work. Before I bought this welding helmet I did some checking around, and I found this is the only one that can be used outside without the sun interfering with it. I couldn’t be more pleased with it.”
Miller hay mill
1 Best Buy0 Worst Buys“I’ve been grinding hay mixed with molasses for more than 40 years using a Miller hay mill made in Turlock, Calif. It’s my best buy. After the first four or five years the company came up with a ‘Bale Buster’ equipped with six sickle blades. The machine’s four paddles have only been changed twice - after grinding 2,500 tons of alfalfa and oats hay. It’s a great machine.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.