Drill Doctor: what farmers say
35 reports in FARM SHOW · 27 Best Buys8 Worst Buys
Drill Doctor drill bit sharpener
13 Best Buys4 Worst BuysA Gearwrench 3/8-in. drive ratchet and socket set rates as Dennis’s “best buy” (www.gearwrench.com; ph 800 621-8814). “It’s made with top quality craftsmanship. The ratchets have a 72-tooth gearhead which makes it easy to work in tight corners. The company offers a comprehensive lineup of metric and SAE sockets.”
On the “worst buy” side, he lists his Drill Doctor drill bit sharpener. “After I used it for a short time the grinding wheel slipped on the arbor, so when I tried to split the point it messed up the bit. The company sent us another sharpener right away, but after we used it a few times the same problem happened again.”
Lonnie’s had success with his Drill Doctor drill bit sharpener. “I’ve used it to sharpen 120 drill bits in just 4 hrs. It’s perfectly centered and extremely sharp and works great for sharpening broken bits, as well as split points and carbides. It was well worth the $110 I paid for it.”
Titus likes the 747 ultra welding rods he bought from United Alloy Research and Development (ph 800 356-9353; www.unitedalloysrd.com). “These rods are designed for high strain welds and make an amazingly strong welds. We’ve been using them for a number of years now and have hardly ever broken a weld. The rods are too expensive to use on just anything, so we keep a box or 2 on hand and only use them where we really need them. Applications for these rods include: spring steel, tool steel, castings, manganese steel, stainless steel, dissimilar metals, and structural steel.
“Also on the best buy side, our Drill Doctor drill bit sharpener has been trouble-free and does a great job.”
“I like Seal Lube seal expander, which is designed to stop rubber seal leaks in any fluid system (ph 800 434-9192; www.seallube.com). I used it on an old Case 320 tractor which had a power steering ram that would leak out all the fluid overnight. I poured about 2 oz. of Seal Lube in the hydraulic reservoir and it never leaked again. I also used it in my 1981 Chevrolet pickup, which was equipped with a Tommy Lift that seeped oil at the ram shaft. One tablespoon solved the problem. It’s a great product.
“My wife bought me a Drill Doctor drill sharpener that has proved to be a best buy. I had saved up worn drill bits over the past 50 years, some of them so dull they wouldn’t even drill a single hole. Now I can use these bits again.”
“I think some people have problems with the Drill Doctor drill bit sharpener because they don’t put the bit in correctly. If the bit isn’t centered exactly the sharpener will grind it flat. We’ve successfully used our Drill Doctor to sharpen hundreds of bits, and it has paid for itself many times over.”
“My 1991 Dodge 2500 pickup equipped with a Cummins diesel engine just keeps going and going, as does my 1952 Ford 8N tractor. I also like my Drill Doctor drill bit sharpener. It works great and saves money, too.
“My 2002 Deere L100 42-in. riding mower equipped with a 17 1/2 hp engine quit starting without help after one season of use. The dealer said the compression release had broken so they replaced the engine at no charge, but they also billed me $80 for cleaning, greasing, and leveling the mower deck. The engine started okay for a couple of years but now it’s having problems again. I won’t buy another Deere riding mower.”
“My best buy is my Drill Doctor drill bit sharpener. It performs exactly as advertised and is quick and easy to use. It has saved me a great deal of time and aggravation.”
On the negative side, he lists his 2006 Jinma model 345 loader tractor with backhoe. “Already this tractor has had a blown head gasket, two bad injectors, a split radiator tank, a blown hydraulic hose, and a leaking rear main seal. Three of the backhoe cylinders failed within the first 20 hours of operation. I’ve had to replace the loader control valve, hoses and quick couplers due to leaks. The valve rockers wore out and new bushings had to be installed. The dealer has been fairly helpful, but this has been an expensive ‘cheap’ tractor.”
“After 60 years, my 1945 Ford N tractor still performs with flawless efficiency. It has required only routine maintenance.
“My Drill Doctor bit sharpener is my worst buy. I fought with it for hours, but all I got was a bunch of dull drill bits.”
John likes his Drill Doctor bit sharpener. “We always had a lot of drill bits around our shop. Now we have sharp bits, whenever we need them.”
Robert likes his Drill Doctor drill bit sharpener (Dakota Sales, 7560 153rd Ave. S.E., Wyndmere, N. Dak. 58081 ph 800 260-9944). “It can be used to sharpen bits from 3/32 to 3/4-in. diameter and can be used on conventional, split-point, and masonary drill bits. It works on carbide, cobalt and high speed steel.”
Robert likes his Drill Doctor drill sharpener. “It does a good job of sharpening drill bits up to 3/4 inch in diameter. When I had some problems with the chuck turning hard, the company not only replaced the chuck but the entire machine, claiming that the plastic used on some models absorbs water and swells up, causing the problem.”
Robert isn’t as impressed with his 2001 Chevrolet Impala. “I took delivery one day toward the end of June. It was a hot day and the air conditioner wasn’t working right. On my second trip to the garage they discovered that the air conditioner was low on freon. When I speed up on the highway, the air conditioner shifts down. I have to drive more than 40 miles before it shifts back up at about 60 mph. The dealer can’t find anything wrong and says I’ll just have to get used to it. This winter I had to drive 15 to 20 miles before I could get warm air into the car. My feet were always cold.
“Another problem is the electric adjustable bench seat - I still haven’t figured out how to adjust the seat for comfort. It rides like an empty lumber wagon and is hard on my back.”
“My 2000 Drill Doctor drill bit sharpener is my best buy. I haven’t used this tool very much yet, but it seems to do a good job of sharpening dull and broken bits. The only problem is that any bit smaller than 5/32 in. diameter is difficult to set up in the machine.
“My DeWalt 12-volt cordless drill is my worst buy. A replacement battery for it costs almost half as much as the entire kit costs new.”
“My Drill Doctor drill bit sharpener is my best buy. It’s currently sold by Sears, Lowe’s Home Improvement, and Home Depot. I bought mine at Lowe’s for $82.97 and the money was well spent. It does everything the manufacturer says it will do. After I got it home and sharpened a few bits, I couldn’t stop until I had sharpened every used drill bit in my shop. It’ll even sharpen broken-off bits back to like-new condition. I’ve probably sharpened 65 drill bits with it, ranging from 3/32 to 1/2 in., yet there is absolutely no sign of wear on the diamond grinding stone. It comes with an instructional video and is easy to use, with a good warranty.
“My Snapper riding mower equipped with a 10 hp Briggs & Stratton gas engine and 28-in. deck is a best buy. I’d recommend it to anyone. It does a fine job of cutting.”
“Our Landa hot water pressure washer puts out 4 gpm at 3,500 psi and is convenient to use -just hook it up to a source of water. It has a lot of power and will strip grease, dirt and loose paint off easily. The hot water really cleans everything up.
“My Drill Doctor drill sharpener is my worst buy. It sharpens about 1/4 to 1/3 of the drill bits ‘backward’, so that the cutting edge is the lowest spot instead of the highest spot as it should be.”
Douglas likes his Drill Doctor drill bit sharpener. “It’s user friendly and works just like the company said it would.
“I like my Sears Craftsman garden tractor equipped with a 42-in. mower. The deck is nice and level, the automatic transmission works great, all the controls are within reach, and it steers easy. The Briggs & Stratton 19 1/2 hp Twin-Turbo gas engine is smooth and vibrates very little compared to a single cylinder engine. All these features are a definite plus to someone who has arthritis. It’s built a lot like a ‘real’ tractor.
“All my Ford vehicles have been best buys, including ten cars, six pickups, four grain trucks, two full-size conversion vans, an Explorer, a Windstar van, and three tractors. I’ve used other brands, but in the end I’ve been much more satisfied with the performance of Ford products. The only real problem is that when I want to buy a used Ford, it’s hard to find one for sale.”
“I like my DeWalt 14.4-volt cordless power screw and drill driver. I bought it a year ago to fasten screws into a metal pole building which our local antique club was putting up. I was able to drive screws for two hours nonstop on a single battery charge. By that time the other battery was charged up and ready to go. It really comes in handy around our farm for drilling holes anywhere there’s no electricity. The worst thing about it is that whenever I go to use it I can’t find it. Either my wife has it in the house or my son has it in his truck.”
On the “worst buy” side, Harvey lists his Drill Doctor bit sharpener. “It worked alright at first, but after a couple of months, it wouldn’t sharpen the back side of the bit. Considering what I paid for it, I consider it a big rip-off. I’ve now gone back to sharpening bits free-hand on my old grinder.”
One of John’s “worst buys” is the “Drill Doctor” drill sharpener he bought from Dakota Sales. “It will not sharpen drill bits at the proper angle,” he says. “I called the company and they gave me all kinds of pointers on how to use the sharpener the ‘right way.’ I took their advice but it still doesn’t work properly.”
Drill Doctor (general)
6 Best Buys4 Worst Buys“Years ago I bought a Drill Doctor because it’s so difficult to properly sharpen drill bits. I purchased it even though it seemed expensive. It’s an amazing tool and worth far more than I paid. I do a lot of metal fabricating and whenever one of my drills has a hard time cutting, a few seconds on the Drill Doctor makes it cut like a dream (www.drilldoctor.com).”
“I noticed in your last issue that a fellow wrote in to say he was happy with his Drill Doctor for sharpening drill bits. I also bought one several years ago along with a converter that lets you sharpen oversized bits in the machine. I have been more than satisfied with the purchase. I was a heavy mechanic for 31 years and have many sets of carbide and titanium drill bits. Drill Doctor does an absolutely wonderful job of sharpening them.
“Two years ago, my wife gave me the Ken Onion edition of the Work Sharp knife and tool sharpener. I must say I’m thrilled with this sharpener. I’m a perfectionist when it comes to sharp knives and tools, and this sharpener fills the bill completely. I have drawers full of previous knife and tool sharpeners in my shop and have discarded them all in favor of the Ken Onion sharpener. It quickly puts a razor sharp edge on knives, scissors and any other blades, using a series of 5 belts, the finest being 6000 grit.
“Both of my ‘best buy’ products are made by the same company in Oregon and they are very good at making quality-built products at reasonable prices.”
“I’m surprised at how well my Drill Doctor performs (ph 800 418-1439; www.drilldoctor.com). Works great to restore dull bits so I can keep on working.”
Donald’s the satisfied owner of a 2008 Kubota B3030 diesel tractor equipped with a front-end loader, heated and air conditioned cab, snowblower, and 5-ft. mower. “The heated cab makes it a pure joy to blow snow when it’s 25 degrees below zero, and the air conditioned cab is ideal for loader and mower work in hot weather. No problems. Also, the diesel engine is easy on fuel.
“My 2004 Drill Doctor doesn’t do a good job sharpening bits. The problem is that it doesn’t have enough rake or heel clearance, so the bit just slides around rather than cutting. It’s at its worst on small bits, which I use a lot. No amount of adjusting seems to help.”
“My Drill Doctor is my worst buy. It might work alright with more practice, but I had problems with it taking the cutting edge off and damaging some bits. I think it costs too much for the amount of time and practice that’s required to use it.”
David’s impressed with his 2004 Drill Doctor. “I’m always in need of a sharp drill bit. I can’t sharpen drill bits by eye and all the other drill bit sharpening gadgets on the market are better left at the store. Last Christmas my wife surprised me with a Drill Doctor 750 which handles up to a 3/4-in. dia. bit. Wow! Now I can have a sharp bit in minutes that will cut great and last a long time.”
On the minus side, he lists his Porter Cable 4 1/2-in. side grinder. “I try to buy the best tools I can afford, but my decision to buy this side grinder for more than $125 turned out to be a mistake. It burned up the first time I used it. I drove 60 miles to return it to the dealer and got a replacement. However, a couple of weeks later that one failed, too. Lesson learned. I threw it away and went back to using my old Black & Decker 4 1/2-in. grinders. They last a long time and the company will rebuild them for about $50. And they offer a one-year guarantee.”
“We’re well satisfied with our six Landini tractors, which we use in our vineyard. We especially like the 6530 F model, which has more than 8,000 hours on it. The engine has never been touched except for the injectors. Our two newest models are a 70 F and an 80 F. They’re both 4-WD and work great except for problems we’ve had with the electronic dash, which our dealer is working on.
“Our Drill Doctor is our worst buy. We had a hired person use it to sharpen drill bits. It took a long time to sharpen the bits, and after about twenty 3/8-in. bits had been sharpened we were informed the wheel was worn out and had to be replaced. Now we’re looking for someone to sell this lemon to.”
“My Drill Doctor is my best buy (Dakota Sales, Wyndmere, N. Dak. ph 800 260-9944). It lets us pull all our old dull drill bits back into like-new condition. It comes with good instructions so anyone use it.”
Bill isn’t happy with the Drill Doctor that he uses to sharpen metal-cutting drill bits. “It works too slow for sharpening 250 to 300 bits at a time, which I sometimes have to do. The per unit cost to sharpen bits is too high compared to other drill bit sharpeners on the market. If you want to sharpen extremely hard Cobalt bits, you need to add a special diamond grinding wheel to the unit. But that grinding wheel doesn’t last as long as others on the market.”
“Our Deere 7800 MFWD is almost a perfect tractor. It’s easy to handle, rides well, and has power. The cab is roomy and comfortable.
“Our Gleaner R-42 combine is a pleasure to operate. It’s equipped with a Cummins engine that has been trouble-free xcept for an oil leak that was hard to find but easy to fix. The engine does like to use fuel, though.
On the “worst buy” side, he lists his Drill Doctor which is designed to sharpen drill bits. “It doesn’t work for us. We called the company and they were helpful, but even after the bits are sharpened they just won’t cut.”
Drill Doctor sharpens drill bits
3 Best Buys0 Worst Buys“My Drill Doctor sharpens drill bits quickly. It’s the best drill bit sharpener I’ve ever used.”
“My best buy is my Homelite XL2 chain saw. I’ve used it for 20 years with few problems. It cuts good, is easy to start, and is light in weight so it’s easy to handle. I’ve replaced bars, a couple of chains, and one pull rope - that’s all. I’m well satisfied with this chain saw.
“My Drill Doctor sharpens drill bits as good as new.
“My worst buy was having my 1992 Ford Explorer rust-proofed by Ziebart. Five years and 46,000 miles after the rust-proofing job, I noticed that rust was coming through from the inside on the lower rocker panels, under the rear doors. I took the vehicle back to Ziebart, but they said the rust was caused by a Ford design problem. So I went to Ford, but they said the vehicle wasn’t rusted out enough to justify making any repairs. I went back to Ziebart with two $900 to $925 estimates, but they said they would only pay $350 to repair the panels. This happened in May 1998.
“Last March I decided to have the rust problem taken care of. The Explorer had only about 50,000 miles on it and I was happy with the vehicle itself. I took it to a body shop and they started work on it. Once they cut into it they found that it was rusted worse than it looked from the outside, but they fixed it anyway. When they were looking it over they noticed some bubbles on the bottom left side of the front fender. They cut into it and found a big rusty hole on the inside. When they took the fender off to replace it they found that the Ziebart rust-proofing material had not been sprayed on the bottom half of the fender.
“I took the old fender back to Ziebart to show them what had happened and asked them if they would pay to replace the fender. They said they couldn’t pay because I hadn’t brought the Explorer back for inspection every year.
“I ended up spending $3,000 of my own money to fix all of these problems. Ford paid nothing, and Ziebart gave me a check for only $350. All they want is your money, and they won’t help you when they do mess up. These two companies do a poor job of backing up their warranties.” ph 306
He’s happy with his new Drill Doctor precision drill bit sharpener. “It’s the first drill bit sharpener I’ve ever seen that’s real easy to use and actually works. It’s got a diamond sharpening wheel so it doesn’t get the bits hot. It’s as easy to use as a pencil sharpener and it’ll sharpen bits up to 3/4-in. dia. in just under a minute. The grinding wheel turns at 13,500 rpm’s and it’s got a built-in alignment system. I paid $169.95.” (Contact: Dakota Sales, 7560 153rd Ave. SE, Wyndmere, N. Dak. 58081 ph 800 260-9944 or 701 439-2860).
Drill Doctor 350X drill bit sharpener
2 Best Buys0 Worst Buys“My 2018 Drill Doctor 350X drill bit sharpener comes with good instructions and can be used on bits from 3/32 to 1/2 in. (www.drilldoctor.com; ph 800 597-6170). This isn’t a commercial grade tool, but it performs much better than I expected and cost only $49.95.”
“My 2004 Chevrolet Silverado extended cab pickup makes a clunking noise and a vibrating noise under the hood. The dealer put on some new parts to try to solve the clunking noise, but it always starts up again after about a month of driving. I’ve given up on it. My next pickup will be a Dodge.
“My Drill Doctor 350X is a best buy.”
Drill Doctor 500 precision drill bit
1 Best Buy0 Worst BuysJunior likes his 2003 Drill Doctor 500 precision drill bit sharpener (Dakota Sales, Wyndmere, N. Dak. ph 800 260-9944 or 701 439-2860). “I got it as a Christmas gift. The day after Christmas I used it to sharpen more than 100 drill bits. I went to Lowes and bought an extra chuck that lets me sharpen bits up to 3/4 inches in diameter. I’ve probably got at least 100 more bits to sharpen when time permits. I love it.
“My 1993 Ford F-250 4-WD pickup is my worst buy. I bought it used when it was a year old and now it has about 93,000 miles. Two years ago both fuel tanks started leaking.The front tank still leaks. I used JB Weld to repair the back one. The bed is all rusted out, and a year ago the transmission went out. The truck is still in my shop with the transmission pulled, waiting on another one.”
Drill Doctor 500 SPX drill bit sharpener
1 Best Buy0 Worst Buys“My Drill Doctor 500 SPX drill bit sharpener didn’t live up to the company’s advertising claims. No matter how hard I try, I can’t get it to sharpen drill bits. I’ve tried, a friend has tried and also my grandsons, but with no luck. Buying it was a waste of time and money.”
Drill Doctor 750 bit sharpener
1 Best Buy0 Worst BuysDick likes his Drill Doctor 750 bit sharpener. “I resisted buying a Drill Doctor for years because of the $200 plus price tag. Finally my supply of dull bits became larger than my supply of sharp bits, and it was time to try it.
“The Drill Doctor came with DVD instructions which I found were easy to understand. I was so impressed with the process of sharpening drill bits that I spent several hours sharpening bits in the first two days, finishing off more than 200 bits up to 3/4 in. in diameter. The results were better than I expected. I even found myself sharpening new bits that didn’t really have to be sharpened. The Drill Doctor put an edge on the bits that was better than the factory. I wish I had bought a coarse wheel for sharpening larger bits - it takes longer to sharpen large bits with the standard wheel.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.