Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Drill Doctor › sharpens drill bits

Drill Doctor sharpens drill bits

What FARM SHOW readers say · 3 Best Buys0 Worst Buys · Power & Hand Tools

Drill Doctor sharpens drill bits

3 Best Buys0 Worst Buys
Best Buy
Jim Parsons, Paonia, Colo. · Vol. 33, No. 2 (2009), p. 14

“My Drill Doctor sharpens drill bits quickly. It’s the best drill bit sharpener I’ve ever used.”

Best Buy
Walt Hanefeld, Continental, Ohio · Vol. 26, No. 1 (2002), p. 17

“My best buy is my Homelite XL2 chain saw. I’ve used it for 20 years with few problems. It cuts good, is easy to start, and is light in weight so it’s easy to handle. I’ve replaced bars, a couple of chains, and one pull rope - that’s all. I’m well satisfied with this chain saw.

“My Drill Doctor sharpens drill bits as good as new.

“My worst buy was having my 1992 Ford Explorer rust-proofed by Ziebart. Five years and 46,000 miles after the rust-proofing job, I noticed that rust was coming through from the inside on the lower rocker panels, under the rear doors. I took the vehicle back to Ziebart, but they said the rust was caused by a Ford design problem. So I went to Ford, but they said the vehicle wasn’t rusted out enough to justify making any repairs. I went back to Ziebart with two $900 to $925 estimates, but they said they would only pay $350 to repair the panels. This happened in May 1998.

“Last March I decided to have the rust problem taken care of. The Explorer had only about 50,000 miles on it and I was happy with the vehicle itself. I took it to a body shop and they started work on it. Once they cut into it they found that it was rusted worse than it looked from the outside, but they fixed it anyway. When they were looking it over they noticed some bubbles on the bottom left side of the front fender. They cut into it and found a big rusty hole on the inside. When they took the fender off to replace it they found that the Ziebart rust-proofing material had not been sprayed on the bottom half of the fender.

“I took the old fender back to Ziebart to show them what had happened and asked them if they would pay to replace the fender. They said they couldn’t pay because I hadn’t brought the Explorer back for inspection every year.

“I ended up spending $3,000 of my own money to fix all of these problems. Ford paid nothing, and Ziebart gave me a check for only $350. All they want is your money, and they won’t help you when they do mess up. These two companies do a poor job of backing up their warranties.” ph 306

Best Buy
Dick Burd, Canton, S. Dak. · Vol. 21, No. 3 (1997), p. 14

He’s happy with his new Drill Doctor precision drill bit sharpener. “It’s the first drill bit sharpener I’ve ever seen that’s real easy to use and actually works. It’s got a diamond sharpening wheel so it doesn’t get the bits hot. It’s as easy to use as a pencil sharpener and it’ll sharpen bits up to 3/4-in. dia. in just under a minute. The grinding wheel turns at 13,500 rpm’s and it’s got a built-in alignment system. I paid $169.95.” (Contact: Dakota Sales, 7560 153rd Ave. SE, Wyndmere, N. Dak. 58081 ph 800 260-9944 or 701 439-2860).

Own a Drill Doctor? Tell FARM SHOW how it’s held up.

Your report could appear in a future issue.

Send your Best or Worst Buy

More Drill Doctor products

Drill Doctor 350X drill bit sharpener 2 best · 0 worstDrill Doctor drill bit sharpener 13 best · 4 worst

See all Drill Doctor reports →