Sears Craftsman cordless drill
What FARM SHOW readers say · 12 Best Buys4 Worst Buys · Power & Hand Tools
Sears Craftsman cordless drill
12 Best Buys4 Worst Buys“My 2012 Honda CRV has more than 106,000 miles on it, but has needed only a new battery and a new set of brake shoes. It has all wheel drive and handles amazingly well on wet roads and in snow. It averages about 28 mpg.
“The batteries on my Sears Craftsman cordless drill don’t stay charged and run down even when they’re not being used. Then they don’t charge up very well and won’t run the drill for any length of time.”
“My 2016 Sears Craftsman self propelled, walk-behind lawn mower works great on my steep yard. No problems.”
A 2014 Cub Cadet snowblower rates as his “worst buy”. “It always started, but at full throttle the engine rpm’s would constantly surge up and down. I put up with the machine that way for one winter and then returned it to the dealer, who replaced the carburetor under warranty.”
“My Sears Craftsman shop vacs have never failed me. I use them to clean up around the house or shop, and when we have flooding problems. I always keep two vacs on hand. Fine particle filters are available for this vac and they work great. I bought several attachments for the vac and a 20-ft. hose to use with them. Sometimes I even buy new vacs and give them away as house warming gifts or for anniversaries and graduations. Everyone who receives them loves them.
“I replaced all my gas-powered tools with cordless ones including a chainsaw, leaf blowers, weed trimmers, and a snowblower. I like not having to mess around with cans, oil-and-gas blends, bad gas, filters, spark plugs, and so forth. My wife enjoys using these cordless tools for the same reasons.”
“I got totally frustrated trying to get my Sears Craftsman gas-powered leaf blower to start, so I bought a 2017 EGO 56-volt cordless model (www.egopowerplus.com; ph 855 346-5656). It has as much power as a gas model and is a real pleasure to operate. I just press the trigger to start it and go. The battery takes about 45 min. to recharge. It lasts a long time but in my opinion is too expensive to justify buying a spare.”
“Last year my wife found an old Sears Craftsman stick welding machine advertised on Craigslist. It wasn’t running but all it needed was some lubrication to free up the control. I used a 50/50 ATF/acetone to soak the affected parts and in a couple hours the shaft was freed up. Since then, the welder has worked perfectly. I’ve done a lot of work with it, no problems. I noticed one of your readers recently also praised his 1960’s Sears Craftsman welder and I have to agree. This is one heck of a machine.”
“I like my 2011 Sears Craftsman 18-in. electric chainsaw equipped with a 4 hp. motor. I’ve used it a lot but it continues to work great. It has had only some minor electrical problems with the electrical cord’s plug end. I can use this saw with a portable generator. I like not having any fuel problems like with gas saws.”
“My 2012 Sears Craftsman 21-in. push mower equipped with a Briggs & Stratton engine starts right up with just one or two pulls. This mower is easy to operate and seldom plugs up since I enlarged the discharge hole in the deck.
“I work on Freightliner trucks regularly and find that they’re poorly designed, with key components located in hard-to-reach areas. I’ve driven and repaired other truck brands and consider Freightliner one of the worst. Their frame rails seem to be spaced closer together, which makes anything located around the lower half of the engine difficult to access.”
“I’m 57 and have used Sears Craftsman power tools all my life. Some of the tools are older than I am but still perform well.
“After a tornado came through in 2008 and totaled my 1991 Dodge pickup, I bought a used 1999 Dodge extended cab model equipped with a Cummins diesel engine. I put more than 300,000 miles on the 1991 pickup. The 1999 model had about 72,000 miles when I bought it and now has about 124,000 miles.”
“Robert’s disappointed with his 2006 Troy-Bilt Super Bronco garden tractor. It hasn’t made it through a season without a breakdown or engine problem. I had to replace assorted springs and belts. Now it needs a carburetor and is leaking oil. Fortunately, my 12-year-old Sears Craftsman riding mower is still running.”
“My 2008 Sears Craftsman riding mower cuts great, even in tall grass. It has a comfortable ride and is easy to operate. Also, my wife really enjoys using it.”
“My 2006 Biotech Edenpure G-7 air purifier does a great job of eliminating odors in our home and also eliminates dust particles. I have coal miner’s black lung, and with this product my breathing is much better.
“My 2005 Sears Craftsman riding mower equipped with a 42-in. deck is my worst buy. The tractor has an excellent ride, but the deck cuts uneven and leaves streaks of uncut grass. I checked for bent blades and adjusted the deck, but it didn’t help. A service man came out and made adjustments, but that didn’t help, either.”
Fred’s happy with his 1939 Sears Craftsman 8-in. table saw. “This saw has had a lot of use over the last 65 years, which includes four generations of handymen. It still rips and makes miters like a new table saw. And, of course, it was made in the U.S.”
Bill likes his 2001 Sears Craftsman 42-in. riding mower equipped with a 17 1/2 hp engine. However, he had a problem with the axle/spindle on the tractor’s left front wheel. “The axle literally broke in two pieces, and the spindle housing split due to poor factory welds and because the metal on the axle was too thin. I was told the company’s new replacement axles are built heavier, so I ordered a complete new axle. However, it turned out to be identical to the first one so I didn’t use it. Instead I rebuilt the broken axle by clamping it back together and then welding it properly. I welded in two 3/8-in. lengths of rebar to the bottom side of the axle to make the axle stronger than new.
“The front wheels on this tractor have bushings that the company calls friction bearings. However, even with regular greasings the lower side of the left front spindle had excessive wear. I used my welder to build up the worn area, then machined it so the wheel would fit properly. After six months of use I’m now satisfied with it. Would I buy another Sears Craftsman garden tractor? Since I’m able to repair the faults on this tractor, I probably would - if I could buy it at a discount like I did this one. I also have a 1996 Sears Craftsman 42-in. mower that has had no problems.”
“My Sears Craftsman lawn tractor/mower equipped with a Briggs & Stratton 18 hp twin-cylinder engine and 46-in. deck is my best buy. The engine has a lot of power and runs smooth. I weigh 270 lbs. yet I can mow 45 degree slopes with ease (I go up and down the slope, not crosswise). It’s very easy on fuel,too. After 10 years of use all I had to replace was one belt on the mower. The only thing I don’t like is that there are no grease zerks on the steering parts (tie rods, drag links, etc.). I paid a welder $2.00 to fix one of the ball joints instead of spending $800 for new Sears parts.”
“It’s a great performer,” says Johnie about his Sears Craftsman riding mower equipped with an 18 1/2 hp twin cylinder Kohler Magnum gas engine. “It makes a 46-in. wide cut. I also like my Sears air compressor.
“My 1997 Ford F-150 pickup equipped with a 4.6-liter V-8 engine and automatic transmission is a best buy.”
“One of my best buys of all time is my 1969 Deere 4020 tractor. I still use it. “My 1985 Ford Thunderbird is a best buy. I just traded it in for a 1997 Buick LeSabre which I hope will perform just as well. “My 1994 Ford F-150 pickup equipped with an extended cab pickup and 302 cu. in. engine has been trouble-free. It has 31,000 miles on it. “On the worst buy side I’m disappointed with my Deere 175 hydro lawn mower equipped with a Kawasaki engine. The body of the air cleaner warped at 20 hours. I had to buy an entire new air cleaner - element and all. It wouldn’t start in cool weather until I put an electric fuel pump on it and gave it a little ether. The idler bearings, which were made in Hungary, were poor. “My 1979 Datsun pickup got only 18 to 23 mpg. It burned oil and the exhaust valve seats came out at about 65,000 miles so I had to overhaul the engine. “MySearsCraftsman 9-in. hand grinder was a piece of junk. The armature fell apart but the company wouldn’t even provide a cost estimate on a new one before sending it so I put it in the junk where it belongs. I bought a Sioux grinder which I really like.”
Own a Sears? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.