Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Brands › DMI

DMI: what farmers say

5 reports in FARM SHOW · 3 Best Buys2 Worst Buys

DMI (general)

0 Best Buys1 Worst Buy
Worst Buy
Frank Glenn, Farmer City, Ill. · Vol. 21, No. 5 (1997), p. 16

“One of my worst buys is my 1990 Deere 8960. Deere really ruined a good engine with their specifications for the engine in this tractor. Last spring I replaced the fuel pump with one recalibrated by Schield diesel, Efngham, Ill., and gained 1 mph pulling a 46-ft. cultivator. The only thing I do like about this tractor is the 24-speed transmission. The new Deere tractors with the Penske engines and all the electronics do not impress me. My next tractors are going to be blue.

“I had major problems with my 1992 DMI 46-ft. Tiger mate cultivator with a 5-bar harrow. After hitting a hole in the road during transport, I twisted the center axle, creating a major catastrophe. In 1993, DMI solved the problem on new models by increasing the center axle tube to 5/8-in. thickness. Despite the problem I had with the earlier model, I still think DMI is the best on the market and I have since traded for a Tiger Mate II.

“I have a 2600 Kinze 16-row 31-in. planter that I would like much better if it had White planter units and a decent monitor. White planter units would easily fit in place of the pusher units but would require modification to mount in place of the rear units. Kinze has great ideas on their planter toolbars but sometimes quality control is lacking.

“I use a Bruening Seed Vac (made in Shelbyville, Ind.) to fill the planter from bulk bags. I also use it to clean out the planter and other equipment. It’s a best buy.”

DMI 4250 dual placement applicator

0 Best Buys1 Worst Buy
Worst Buy
Bill Leffler, Americus, Kan. · Vol. 21, No. 3 (1997), p. 13

Bill’s the satisfied owner of a 1995 Case-IH 7210 front wheel assist tractor. “It’s a very fuel efficient tractor with a lot of traction and lugging power. Also, the cab has good visibility and well-located controls.” On the negative side, he lists his DMI 4250 dual placement applicator. “The applicator itself is a good product. However, the company changed from a ground-driven piston pump design to a new style which has been a disaster for us. The company realized it was a poor design and changed it on later models, but they wouldn’t stand behind our machine. We have to rebuild the pump at least once a year just to keep it going. There isn’t even a slide rule or chart that we can use to set it by. We offered to pay for part of the cost to make it right, but the company refuses to do anything about it.”

DMI 730 Ecolo Tiger disc ripper

1 Best Buy0 Worst Buys
Best Buy
James Allen, Clare, Iowa · Vol. 25, No. 2 (2001), p. 14

An add-on chopper kit for his Case-IH Axial Flow combine, which was featured in FARM SHOW, rates as his “best buy”. The kit is made by Brian Skipper, 4371 Gleeson Line, Rt. 1, Tilbury, Ontario, Canada N0P 2L0 (ph toll free: 877 754-7737). “I paid less than $100 for it and have used it for five years. It consists of a chopper bar that’s fitted with sickle sections that replace the original short, U-shaped cutter blades. They wear well and stay sharp longer. The real difference shows when cutting green stem soybeans. We installed kits in our Case-IH 915 and 2388 combines. It makes the factory chopper work like a real chopper. It’s possible to get 2,500 to 3,000 acres from one of these kits. “

“Our 1993 DMI 730 Ecolo Tiger disc ripper still looks as good as new and is a best buy. We use our 20-ton, 400 hp Steiger tractor to pull it. We’ve never used a welder on it because nothing on it ever broke. It’s a good tillage tool that’s built to work in any condition.”

DMI rig

1 Best Buy0 Worst Buys
Best Buy
Everett Lemke, Dahlgren, Ill. · Vol. 20, No. 2 (1996), p. 14

Everett’s happy with his 66-ft. wide, 120-ft. long Morton shop building. “It’s easy to heat because the insulation and plastic on it don’t allow any outside air to come through. We use an oil-burning heater to heat it, and the temperature stays the same throughout the entire building without any cool spots.”

On the “worst buy” side, he’s disappointed with his 1993 Blu-Jet V-ripper. “It kept breaking shear bolts and three of the five shanks got bent. The points continually broke, and if they didn’t break they wore out too fast. I replaced it with a new DMI rig.”

DMI ecolo-tiger 730 tillage

1 Best Buy0 Worst Buys
Best Buy
Timothy Prestin, Wenona, Ill. · Vol. 20, No. 1 (1996), p. 14

Tim’s impressed with his new DMI Ecolo-Tiger 730 tillage implement. “It’s equipped with a front row of 22-in. dia. discs mounted on an independent frame that’s equipped with a hydraulic cylinder, allowing the discs to be raised or lowered to vary residue management. The discs are followed by seven deep-tillage shanks mounted in a ‘V’ formation on 30-in. centers. The discs can be equipped with 2, 7, or 10-in. wide winged ‘Tiger-Points’ that run about 1 1/2 in. under the hardpan to break up soil compaction. Various covering attachments and levelers are available to create the desired residue cover and field appearance. An optional ‘X’ disc frame assembly has individually mounted discs on 15-in. centers that are offset to provide a 7 1/2-in. cut. “I’ve searched all my life for a tillage implement that I really like and have finally found it. It works good in all field conditions. I really like being able to raise or lower the discs independently on-the-go to control the cutting and mixing action. The discs are independently supported on spindles so there are no arbor bolts to ball up or scrapers to plug. The disc leveler at the rear of the implement prevents ridging so that when I’m done the ground is almost as level as when I started. If I want I can raise the discs up completely off the ground and just use the tool as a ripper and leveler. I plan to buy another one someday. “I like my Deere 9400 combine but I prefer the larger engine used in the 9500. “My worst buy is my Ford-Versatile 850 4-WD tractor. It’s an axle buster. The company should have a program to replace axle housings.”

Read every report in full

FARM SHOW has run reader Best & Worst Buys since the beginning.

Subscribe to FARM SHOW