DeWalt cordless drill
What FARM SHOW readers say · 6 Best Buys4 Worst Buys · Power & Hand Tools
DeWalt cordless drill
6 Best Buys4 Worst Buys“I’m pleased with my DeWalt cordless drill and impact wrench. They both have plenty of power.
“My Central Boiler outdoor furnace was installed in 2018 and has worked well with only one solenoid needing to be replaced.”
“I’m absolutely thrilled with my 2021 Subaru Outback. With X-Mode driving and over 8-in. of clearance, it’s been amazing in the woods, traversing steep slopes and crawling over sizeable rocks. I’ve hauled several hundred pounds of firewood, concrete blocks, rocks, etc., in the cargo area. It gets great gas mileage, decent acceleration, and is an overall nice ride.”
Steven isn’t impressed with his DeWalt cordless drill. “With little use, the chuck malfunctioned after about a year. Very poor value for the price. No more DeWalt products for me.”
“I’ve been wearing a multitool holster made by Farm Tough Leatherworks every day for over five years (www.farmtoughleather.com). I love that there are no flaps or snaps, just a big magnet inside that grabs my multitool and holds it ‘til I need it. I’ve tried lots of store-bought holsters and these Farm Tough holsters are second to none.
“I have not been impressed with DeWalt cordless drills. The batteries go dead quickly and we’ve had a bunch of DeWalt drills stop working. I took them apart and there was nothing wrong that I could see; some fancy circuit board must have broken internally – so frustrating.”
“I own two 20-volt DeWalt drills, one an impact driver and the other a standard drill. Both tools have a lot of power, last all day with normal use, and recharge fast. They’re the best cordless tools I’ve ever owned.”
On the negative side, he lists his Raven MPV 7100 - a combination riding mower, ATV, and generator in one machine. It uses gas power for cutting and has a 46-in. deck that can be removed if you just want to use the machine as an ATV. Whenever you’re not mowing, you can run the machine on electric power at speeds up to 17 mph. The generator is 110-volt so it can be used to supply power for remote locations or anywhere beyond reach of a power cord.
“I bought this machine from DR Power Equipment in Vermont, but they have stopped selling it,” says Shumpert. “I’m still using it, but don’t know what I’ll do when I need parts. I’m stuck with a $3,500 machine and nowhere to go for sales or service.”
“My Walker B riding mower equipped with a 48-in. deck does a beautiful job without clumping the grass, even if the grass is wet. By pulling 2 pins I can flip the deck up, which makes it easy to clean and sharpen the blades. Everything on this mower is easy to get to except for a grease zerk on the pto shaft. The 2 belts that drive the pumps can be changed in just a minute or two. This mower is definitely built to last.”
On the minus side, “The 18-volt batteries in my DeWalt cordless drill didn’t last long between charges, and after one year they wouldn’t keep a charge at all. The battery’s footprint is so small that whenever I set the drill down with a big spade bit in it, the drill falls over. I finally bought a Porter Cable 18-volt cordless drill and saw combo kit, and love it. It has a lot of power and doesn’t fall over, even with the largest spade bit in it.”
“I haven’t had any problems with my 2003 Kubota 3130 tractor equipped with a backhoe. Kubota tractors are well-built and dependable.
“If you ever drive a Kubota 900 utility vehicle, be aware that it can throw you through the windshield when you let go of the gas pedal. Dentists love them.
“I dropped my 18-volt DeWalt cordless drill from our 50-ft. high tree house. It didn’t work after it hit the ground, but the company sent me a new model overnight. Great company.”
Hobart’s pleased with his DeWalt cordless 1/2-in. drill. “We’ve used this drill to screw on metal roofing and siding, to drill pilot holes, and to extract numerous screws and nuts. The batteries last a long time.
“We’ve had problems with our Swisher 34-ton log splitter. The idler pulley came loose from the shaft and fell off. We were able to find the belt and put it back on. But then as we were bringing the splitter in for repairs to the carburetor, the belt fell off again and we had to buy a new belt and pulley. On the plus side, we haven’t found a log this splitter can’t handle.”
A Bobcat 773 skid loader rates as Ambrose’s “best buy.” “I use it to do custom work, digging holes with a 9, 12, or 18-in. dia. auger, and it has performed exceptionally well. It has about 2,000 hours on it without even so much as an oil leak. I’d definitely buy another one. I also use it with a tree shear to cut trees up to 12 in. in diameter.
“My DeWalt cordless drill is my worst buy. I have to constantly replace the batteries. I’ve gone through three batteries and expect to go through more. I’ll never buy a DeWalt product again.”
Terry’s disappointed with his 2003 Sears 19.2-volt drill. “I used it last June to secure the tin on a storage building that we own. In the process, I had to return the drill four times to get it replaced. In each case the transmission in the drill had stripped the gears. Sears was very helpful each time I came in. I’ve now purchased a DeWalt drill and haven’t had any problems with it.”
Larry’s 1999DeWalt cordless drill is one of his “best buys”. “It has lots of power and I like the keyless chuck and 1-hour quick-charge batteries. I also like the 1/2-in. chuck and the variable torque settings. I haven’t used another electric drill since I bought this one.”
Another of his “best buys” is a 1998 Miller 130 wire feed welder. “It’s a 120-volt, 130-amp welder weighing just 85 lbs. so it’s very portable. I use it both in my shop and in the field, powering it with a 4,000-watt portable generator I have in my truck.”
Own a DeWalt? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.