John Deere 430 yard tractor equipped
What FARM SHOW readers say · 12 Best Buys2 Worst Buys · Tractors
John Deere 430 yard tractor equipped
12 Best Buys2 Worst BuysA 1988 Deere 430 yard tractor equipped with a diesel engine and 72-in. mower deck rates as John’s “best buy”. “This tractor has about 1,800 hours but still runs like new. The deck is perfectly designed. I also use a 54-in. angled scraper blade and a 3-pt. mounted sprayer with it. It’s an awesome setup.”
George is impressed with his 1990 Deere 430 garden tractor equipped with a 3-cyl. Yanmar diesel engine. “I’ve owned several Deere garden tractors over the years, but this one is the best ever. I use it with a 4-ft. blade, 4-ft. snowblower, 5-ft. mower, a material collection system, and a hydraulic post hole digger so it stays busy all year long. It has had only a couple of small problems which were easily fixed. The hydrostatic transmission works great. Even in subzero weather this tractor never fails to start, although most of the time I would plug the engine heater in for a half hour or more.”
Stanley likes his 1988 Deere 430 diesel garden tractor. “We use it as a bulldozer, lawn mower, and garden tiller.”
Mike nominates replacement V-belts sold by Jay Dee Enterprises, Inc. as his “best buy” (3465 Lost Nation Road, Unit 15, Willoughby, Ohio 44094 ph 800 989-0162 or 440 946-9367; website: www.jdv-belts.com). The company bills itself as a farm market supplier of “quality V-belts at economical prices.” If they don’t have a scarce replacement belt in stock, they can have one custom made.
“They sell an endless belt which can be cut to any length. It was a life saver for us,” says Mike. “We used one on a 1960 Deere 430 crawler equipped with a Deere 90 loader. The hydraulic pump on this crawler is mounted up front, so to replace the fan belt and also the generator belt you have to just about totally disassemble the entire front end of the crawler. We broke the generator belt on a Sunday, and I ordered a replacement belt off the company’s website that night. Monday morning I got an email from them stating that the order had been received. The package was delivered on Tuesday via Fed Ex, and ten minutes later we were rolling. The smallest order they take is 10 ft. so we have plenty left for future use.
“Our Deere 430 crawler is also a best buy. It has a factory 3-pt. and pto and is a handy little workhorse. Not everyone needs a big D8 Cat sitting in their shed. We totally rebuilt it from the radiator cap all the way back to the drawbar. We use it with a rotary mower in our pastures, and we also use it with a 3-pt. rear blade to move dirt. I would think there would be a market for this size crawler, except that today it would probably be made overseas and would be overpriced. If it were made again today it would have to be built with 1960’s made-in-America quality.”
“I like the Pengo auger teeth we mounted on our Deere 31 3-pt. posthole digger. The abuse this digger has been through in rocks is unbelievable but the teeth still look like new. I bought the auger teeth years ago while they were still being made by an independent company located in California. The company has since been bought out and is now headquartered in Laurens, Iowa (ph 800 599-2011; website: www.pengocorp.com).
Robert’s much happier with his 1998 New Idea 4844 round baler than he was with the Deere 430 baler he had before.
“The hydraulic pump on the Deere wouldn’t operate at anything less than maximum rpm’s. It was such a heavy machine it required a 70 hp tractor to pull it to make a 4 by 4-ft. bale. It wouldn’t work properly in dry or damp conditions. The ‘Bale Command’ electronics also didn’t work well.
“On the other hand, the New Idea requires little horsepower. The bales it produces are consistently the same size and weight. It’s a lightweight, compact machine and the electronic bale wrap feature works well.”
Bill Marquardt, Petoskey, Mich.: “I like my 1990 Deere 430 round baler, I’ve never had a problem with it and I really like the bale monitor. It's a necessity for any operator, “I've had trouble with my 1990 Ford F-250 Club Cab pickup. The engine had to be replaced at 70,000 miles because of crank backlash, and the transmission had to be replaced twice because it didn't have ( ( enough cooling capacity. I didn’t get any help from the dealer at all. “T've also had problems with my Gehl 6620 skid steer loader, The servo motors are junk, and the factory cylinder leaks at the welds. This machine just isn’t built well.”
Jason Boyer, East Berlin, Penn.: “It makes nice tight bales at a rate of up to 25 bales per hour,” says Jason, owner of a“best buy” 1988 Deere 430 round baler. “My 1991 Deere 1360 disc mower-conditioner works great and will mow as fast as 1 want to drive.”
Pt » = aceeane ahaaesaess . OA Oe Best & Wo ( “Hydro-Tech silage preservative ismy worst buy. It’s designed to be sprayed onto silage and eliminate the need to cover bun- ker silos with plastic. It’s supposed to swell up and shed water, but with all the rain and snow we had, the top 12 to 1Sin.ofsilagein our bunker silo and 12 to 15 in, along the walls was ruined, It was nice not having to bother with tires and plastic, but it wasted too much silage.”
Howard H. Mann, Rutland, Mass.: Howard's impressed with his 1993 Welger round baler equipped with a net wrap attachment. “It’sa pleasure to entera field and not have to worry about belt splices breaking or net wrapping around the rolls. We owned Deere 430 and Deere 435 balers before we bought this model.”
Guy McDiffett, Alma, Kan.: Guy’s pleased with his 1991 Case-IH 7110, 1992 Ford 1220, and 1992 Case-IH 5140 tractors. All have front wheel assist. “I’m satisfied with all of them. They have handy controls and perform well. I haven’thad any problems with any of them. “My Better Bilt liquid manure tankismy worst buy. Basically, the machine works fine but when a valve broke on the back, the company didn’t have the part. After two months I still don’t have the part. They say it’s on a ship from Italy. They wouldn't consider taking a valve off their assembly line. “I’ve also had problems with my 1992 Westendorf TA 45 front-end loader. My main complaint is with the quick tach mounting system. It has handles that you pull up to unhook the bucket. However, dirt and gravel can getin where the rods work up and down. I have to use a bar to pry the rods up sol can get the bucketoff. Also, the main frame broke during the first year.” Clark E. Zipse, Freeport, Ill; Clark's had good luck with his 1984 Deere 430 diesel tractor. He uses it with a 60-in, wide mower and a 48-in. wide blade. “It has plenty of power for mowing and pushing snow on our hills. No problems.”
Harold Weppler, Morse, Sask.: “It makes the best round bales on the market,” says Harold, owner of a 1988 Deere 430 round baler. “It’s simple to operate and requires little maintenance. “My 1984 Deere 7721 pull-type combine is also a best buy. It does a good job, is easy to adjust, has lots of capacity, and holds its value.” On the negative side, “The feeder chains on my 1989 New Holland 358 mix mill were installed backward. The mill's engage pin sometimes flies out under a load. The dealer couldn't fix it. Ever since Ford took over New Holland the quality has been poor. “My 1986 Case-IH 5600 cultivator is also a worst buy. Two sets of shanks had to be replaced and the wing lift binded and fell down, bending the axle. The wing lift holdup tower tore out of the frame and left hoses dragging. The walking beam axles had to be rebuilt twice.”
Randy Ratliff, Live Oak, Fla.: “My 1989 Deere 430 round baler is a best buy. It makes good uniform bales that stand up well. Converging wheels are worth the extra cost. The only thing I don’t like is that it takes a long time to tic the bale.”
Paul Wallis, Granton, Ontario: Paul says his 1988 Deere 430 and 1989 Deere 435 round balers “have been very reliable. However, sometimes the stems get under the twine knife and prevent twine cutting. Wind can also interfere with twine tying. “My 1987 Gehl 1460 round baler is a worst buy. The belts constantly break and wrap around the top pulley. It cost $400 to fix.”
Larry Shepler, Reynoldsville, Penn.: “It operates smoothly and runs good, but is very clumsily built compared to the 1816 model it replaced,” says Larry about his 1988 Case 1818 skid steer loader. “There's too much overhang on the back so I can’t maneuver it in small places. It also needs a fuel gauge.” Larry’s Hesston 1010 Hydra Swing mower-conditioner is another “worst buy”. “The pivot tongue is the only good feature as it makes it easy to move the rig back and forth from field to repair shop. In one 1 3/4acre field I once broke 11 knives and three guards. It knocked out the cutterbar heads on a regular basis and they cost $70 each to replace. The conditioning rolls were there only to move hay off the cutterbar - they “The pivot tongue is the only good feature. Makes it easy to move the rig back and forth from field to repair shop.” couldn’ tcrimp arotten potato, Finally, stress cracks and bad bearings made us trade it for a New Holland 489 haybine which has caused very little trouble.” On the positive side, “My 1986 White 2 110 tractor runs smooth and is easy on fuel. Gear shifting isa little on the sticky side, but the powershift is smooth and easy to operate. The cab is very quiet and has better visibility than any other tractor I've ever driven. We like the cab so much that we’re looking for one for our White 2-85 tractor.” Larry’s 1989 Deere 430 round baler is another “best buy.” “It’s so easy to operate that the first bale I made with it looked as good as the last of the season, The monitor works great, but it’s difficult to set bale size because there’s no bale size indicator.”
Earl Ehlers, Lahoma, Okla.: A 1984 Deere 430 hydrostatic drive lawn and garden tractor equipped with a 60-in. deck heads Earl’s “worst buy” list. “The 3-cylinder diesel sometimes ran on only one cylinder. The steering would quit when the tractor was working hard on a hot day, and the mower blades wore out in less than 100 hours.”
Own a John Deere? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.