Claas: what farmers say
18 reports in FARM SHOW · 16 Best Buys2 Worst Buys
Claas 860 self-propelled chopper
2 Best Buys0 Worst Buys“It’s a well built, high-capacity machine with a cab that offers great visibility,” says Bruce, pleased with his 1998 Claas 860 self-propelled chopper. “The company provides good support. We had a few problems with the chopper, but the company representative came out with the dealer and actually helped work on the machine. I appreciate how the company helped me get the machine up and running.”
On the “worst buy” side, he lists his Kuhn Alterna 400 mower and Kuhn 7200 hay rake. “We’ve had a lot of problems with the mower. We had to install new cutterbars because the machine’s poor flotation caused them to bend. The rake keeps breaking arms or bending them - a problem that we also had with the Kuhn 6000 model that we owned previously. Also, the machine’s slip clutch failed just after the one-year warranty expired. The dealer contacted the company about these problems, but the company rep told him he had already visited us once and wasn’t coming back. We’ll never buy equipment from Kuhn again.”
“Our best buy is our 1995 Claas 860 forage harvester. It’s fuel efficient and can harvest a lot of feed in one day. It’s also easy to work on and is built with the customer in mind.”
Claas forage harvester
2 Best Buys0 Worst Buys“Our Claas forage harvester is equipped with the company’s new rotary cutterhead, which we like a lot. This machine has a lot of power.
“Our Claas round baler is built strong and makes a nice, even bale.”
Kevin’s had problems with his 2013 Manitou 735-120 telehandler. “It has less than 500 hrs. on it but the radiator already leaks in the seams, the reversible fan doesn’t work, the door latch broke, and the hydraulic overload for the loader kicks out with just a bucket full of snow so that the operator can’t dump or lower it. Now the machine is out of warranty.
“Our Claas forage harvesters are best buys.”
Claas 250 RC round baler uses
0 Best Buys1 Worst Buy“I bought a 1999 Ford F-250 4-WD pickup used with about 140,000 miles on it. Today it has more than 240,000 miles and is still going strong. It’s a pleasure to drive, equipped with a 7.3-liter Powerstroke diesel engine and 6-speed manual transmission. Plenty of power to pull a 24-ft. gooseneck livestock trailer. It gets 16 mpg.
“My 2006 Claas 250 RC round baler uses 17 rollers to make the bale, and all the baler’s chain-driven sprockets are secured to the rollers with gib keys. It’s a good baler for making high moisture haylage, but several of the rollers failed after the gib keys fell out and the sprockets free-wheeled on the shafts, destroying 4 of them. Everything was behind shields so there was no evidence anything was wrong until the shafts broke off and the rollers stopped turning. The company said they had never seen this problem before. Of course, it happened just after the warranty expired.
“We took the four rollers with damaged shafts to a local machine shop which replaced the shafts. The sprockets were also replaced with new centers using taper-lock hubs. It’s a much better system than Claas’s gib key setup.
“The baler requires a tractor with a minimum of 90 hp. Our baler came equipped with a pto driveline rated at 60 hp and 540 rpm’s, and it failed after just two years. The dealer replaced the driveline at his expense even though the machine was out of warranty.”
Claas 340 Rotocut round baler
1 Best Buy0 Worst Buys“I like my 2013 Claas 340 Rotocut round baler. I’ve used Claas round balers for years. Last year, when I was ready to update, I bought a Deere 458 Silage Special because I read that was the way to go. I made 748 bales with it. This baler was so inferior in bale quality and operator ease. I took quite a financial hit to get out of it and bought the new Claas. Now I never have to get off the tractor for any problems.”
On the minus side, he lists his 2011 Deere 6430 4-WD loader tractor with cab. “The dealer told me this tractor would outperform the 110 hp, 6-cyl. model I already owned. However, it was sluggish on the road, weak in the field, and burned 6 to 7 1/2 gal. of fuel per hour. The dealer made numerous repairs to the tractor, but after 600 hrs. I wasn’t satisfied. He gave me a decent trade on a new Deere 7330 tractor, which I do like.”
Claas 355 Rollant roto
1 Best Buy0 Worst Buys“I bought a used 2009 Claas 355 Rollant roto cut round baler used about 2 years ago which had made about 14,000 bales. The dealer went through it for me. Since then I made 1,260 bales in 2018 and 1,400 in 2019 with very few problems. I’ve changed 2 bearings in the rollers and did regular maintenance. It handles very dry hay and any wet heavy hay with ease, as long as you have enough power to run it.”
Claas 44 Rollant round baler
1 Best Buy0 Worst BuysJim’s “best buy” is a Claas 44 Rollant round baler that he bought used.
“It cost less than half the price of a new one. I’ve baled over 6,000 bales of hay, straw and silage with it and it’s been virtually trouble-free. It makes a great-shaped bale every time. They stand the weather better than bales from any other baler I’ve used.”
Claas 44-S round baler
1 Best Buy0 Worst Buys“My 1983 New Holland 472 haybine works good and has been almost maintenance-free.
“My 1983 Claas 44-S round baler works good. I paid less than $500 for it. I use both the haybine and baler to make 700 to 800 bales per year.”
Claas 46 round baler
1 Best Buy0 Worst BuysLeverett likes his Claas 46 round baler. “I used it to make more than 4,000 bales without ever breaking the original shear bolt.”
Claas 900 self-propelled forage harvester
1 Best Buy0 Worst Buys“The Claas 900 self-propelled forage harvester we bought used 2 years ago has been very reliable. We use Claas’s Mad Jag wear liners in it which keeps our downtime next to nothing. We use this machine to chop corn and hay and some cereal grains. It has more than 3,800 hrs. on it, with only one hour of downtime due to a U-joint problem on the corn head. Not bad, considering we used this forage harvester to chop about 50,000 tons of feed last year.
“The anti-spill devices on today’s gas cans end up losing more fuel than they save. The devices don’t vent right and sometimes don’t unlock right, which is a frustrating problem. We usually end up taking the top off the spout and using a funnel instead. The old gas cans with flex pour spouts were much easier to use.”
Claas Lexion 760 combine
0 Best Buys1 Worst Buy“My 2020 Deere mower-conditioner was a good purchase. I bought it new, and it had a cracked gearbox when it was delivered. Deere put a new one on with no questions asked. The mower performs really well.
“My worst buy has to be a Claas Lexion 760 combine. These machines are generally great, but the dealer misrepresented the machine and then wouldn’t make it right. The machine was sold as being field-ready. When it was delivered, it had oil running out of it and loose parts that had fallen into the machine. The computer was throwing many error codes.”
Claas Lexion 770 combine
1 Best Buy0 Worst Buys“Our 2011 Claas Lexion 770 combine is easy to operate and produces a clean grain sample with minimal losses. However, there have been constant mechanical failures; everything from major shafts breaking to just about every belt. The cylinder bearing bolts came out, and there have been minor to major electrical component failures. We can rarely operate this machine for a full day without serious problems.
“Whenever the machine is parked, mice enter the cab and tear up the cab filter. Both fuel tanks started leaking the first year. I expected better from this machine.”
“Rusty” Lanier A. Warwick, Concord, N.C.: Rusty’s impressed with his 2014 Ariens A20VA riding mower equipped with a 46-in. deck and automatic transmission. “After spending countless months researching lawn tractors, I read an article in Lawn and Garden Tractor Magazine that described how Ariens has been in business for 80 years. I was sold.”
Claas Liner 2800 double rake
1 Best Buy0 Worst Buys“Our 2021 Claas Liner 2800 double rake is definitely a best buy. A true time saver and money maker. The rake allows us to mow full width and rake 27 ft. into perfect 4-ft. windrows for our round baler. It’s well-built, easy to operate, and can easily stay ahead of the baler.
“Our 2022 Honda Pioneer UTV is probably our worst buy. It’s hard to service and change oil and has had electrical problems which can’t be found. It’s time to trade for something else.”
Claas Rollant 46 round baler equipped
1 Best Buy0 Worst BuysA 1994 Claas Rollant 46 round baler equipped with net wrap and a front-mounted “Rotocut” chopper is Werner’s “best buy”. “I’ve used it in my custom baling business to make about 8,000 bales, many of them silage bales.”
Claas Rollant Uniwrap round baler
1 Best Buy0 Worst Buys“It has made more than 10,000 bales with very few problems,” says Steve about his 2003 Claas Rollant Uniwrap round baler. “This baler is designed with a rotor cut unit on back that allows simultaneous baling and wrapping. As a result, one person can do two jobs at once and only need to concentrate on baling. Everything else is fully automatic. The machine produces excellent haylage bales which my dairy cattle love. Their milk production has increased a lot.”
Claas Whole Crop Forage mill
1 Best Buy0 Worst BuysPeter’s impressed with his Claas Whole Crop Forage Mill which fits any of the company’s 800 series forage harvesters. “It turns a forage harvester into a mobile mill that mills grains on the move. Believe it or not, if the resulting forage is alkaline preserved you can harvest right in the rain. The machine is built simple and therefore I believe it will turn out to be very reliable. Another advantage is that it takes only about 15 minutes to install or remove it. I think it’ll really go over big in livestock areas. On a scale of 1 to 10, with 10 the best, I give it a 10.”
Claas rotary hay rake
1 Best Buy0 Worst Buys“In the fall of 1998 I bought a Toro leaf blower to blow down cob webs and dust in our barn. I was well pleased with it the first year, but the next year I was able to run it less than a half hour before it quit working. I took it back to the dealer who said it would probably cost more to fix it than to buy a new one, even though he never even looked at the machine. It wasn’t quite a year old and it was supposed to have a two-year warranty. I wrote to the company but they never replied.
“One of my best buys is my Case-IH 8520 in-line baler. I can’t say enough good things about it. I had a New Holland 311 model that worked fine except that it wouldn’t make two bales alike. The Case-IH model makes every bale the same regardless of field conditions.
“One of my worst buys of all time was a Generac generator. I got less than one hour of use from it even though it was in the shop for repairs three different times. I got so sick of it that I traded it for a Winco, which I like. I paid $2,300 for the Generac and got only a $900 allowance toward the Winco.
“I’m unhappy with Goodyear tires. I have a 72 hp front wheel assist tractor equipped with Goodyear tires and although we haven’t used the front wheel assist at all, the front tires have worn down to a tread thickness of only 1/4 to 1/2 inch in only 200 hours. I have another tractor equipped with Goodyear tires, but that won’t happen again.
“My Claas rotary hay rake and my Miller Pro rotary hay rake both do excellent work. However, the Miller Pro model is built much heavier. It cost a little more than the Claas, and time will tell if it lasts longer. I think hay cures faster with rotary rakes than it does with conventional wheel rakes.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.