Westendorf: what farmers say
27 reports in FARM SHOW · 26 Best Buys1 Worst Buy
Westendorf loader
8 Best Buys0 Worst Buys“One of my best buys has been my 1973 Deere 2030 gas tractor, which I bought used 20 years ago. It also has a Westendorf loader, another best buy. It’s a very handy outfit that gets a lot of use on my small farm.”
“My 2001 Kubota M 9000 4-WD tractor starts well in cold weather and handles great. The cab is easy to get in and out of, and the controls are easily accessible. It has been trouble-free.
“In 2003 I bought a new Westendorf frontend loader. Unfortunately, after a month or so, it started settling down and I had to raise it every 20 minutes or so while traveling. The hydraulic valve banks had to be replaced three times before I could get it to work right again. Also, the tilt cylinder seals had to be replaced due to nuts coming loose. At the time the loader had less than 100 hours on it. I’m not happy with the manufacturer because they wanted the dealer or myself to pay for all repairs.”
“I bought my 2004 Toyota Corolla because of its fuel efficiency – it gets 37 mpg. This car is built with quality and has exceeded my expectations in every way.
“My 1972 Deere 4000 diesel tractor equipped with a Westendorf front-end loader is a best buy. I’ve used it almost every day for 33 years, yet it has never been overhauled.”
Terry’s “generally satisfied” with his 2003 New Holland TM155 tractor equipped with a Westendorf front-end loader. “It steers super easy and is highly maneuverable, and the hood lifts up for easy maintenance. The automatic transmission makes it easy to operate. My only complaint is that the fuel economy could be better. I installed a kit from New Holland that lets me operate the loader with a joystick.”
“It’s one of the best loaders on the market,” says Henry about his 2000 Westendorf front-end loader. “I use it on my 1967 Allis Chalmers D17 tractor. I have a New Idea 486 round baler that makes 5 by 6 bales, and this loader picks them up with ease. One person can quickly change from bucket to bale spear without having to get off the tractor.”
“I’m well-satisfied with my Case-IH 7110 tractor equipped with a Westendorf frontend loader. It has almost 7,000 hours on it with few problems. The engine has never been overhauled. We use this tractor to pull a sprayer, and until recently it was the main pulling tractor on our farm. This tractor has a hydraulic seat, but I think air seats are far superior. The loader has been virtually trouble-free.”
“My Westendorf front-end loader is well designed and built heavy. Anyone who needs a loader should price one.
“My IBM Aptiva computer is also a best buy. It comes with Lotus spread sheets. I added a Brother printer which also faxes, copies, scans, and prints.
“I like my 1998 GM Sonoma pickup but I hate the automatic lights on it. The only way to turn them off is to hit them with a hammer.”
Don likes his White 6124 tractor which is equipped with a Westendorf loader. “I really like the tractor’s Quadrashift transmission.”
Westendorf TA 26 front-end loader
5 Best Buys0 Worst Buys“In 2006 I bought a new McCormick 4-WD tractor equipped with a 70 hp Perkins diesel engine. I also bought an Agmeier 150 hp Bush Hog (ph 800 446-7319; www.ag-meier.net) to use with it. Both machines work great.
“At the same time I bought a Westendorf TA 26 front-end loader, which has been nothing but trouble from day one. The bucket’s hydraulic cylinders were weak. The dealer replaced them immediately but the cylinders still leak even after they were repacked 3 times. Last year I sent the company a certified letter asking them to replace the bucket cylinders, but the letter was returned 2 months later, unclaimed. Then I sent the letter by regular mail, but I’m still waiting for a reply.
“I recently added 4 bottles of SealLube to the cylinders, which slowed down the leakage a little. One of the cylinders has always shown heavy rust streaks on it. I would’ve expected this company to stand behind its products and at least reply to a customer. On the plus side, the loader itself is built heavy.”
“My Westendorf TA26 front-end loader is my best buy. I really like the bucket-mounting system. The loader itself is also easy to take off and put back on and doesn’t require any tools. The company offers many different size loaders to fit any tractor.”
“It has done everything I’ve wanted it to do,” reports John, pleased with his 1996 Westendorf TA 26 front-end loader. “It takes only a couple of minutes to put on and take off. I’ve used it to move big hay bales and dirt, to tear up concrete, and many other jobs. No problems at all.”
“My only regret is that I didn’t buy one years ago,” says Floyd, whose “best buy” is a 1997 Westendorf TA26 front end loader. “It’s a true quick-tach loader, taking only a few minutes to attach and detach. That makes it practical to take off when it’s not needed. I’ve seen a lot of other so-called ‘quick-tach’ loaders that take two hours or more to install and remove.”
“The Westendorf TA26 front-end loader that I mounted on my Deutz 6807 tractor is a pleasure to operate. It takes only 3 to 5 minutes mount or dismount, switching from the bucket to a bale spear can be done in even less time. I don’t believe I could tear it up if I wanted to. “My Powder River cattle handling equipment is indestructible. “I’ve had problems with the bell housing on my 1985 Ford F-250 4-WD diesel pickup. The pivot mechanism for the clutch broke out and I had to reweld it. It checks OK when bolted down and indicated on a milling machine, but the clutch plates now last only 20,000 miles. Otherwise I like it.”
Westendorf TA 46 front-end loader
3 Best Buys0 Worst Buys“I’m well satisfied with my Case-IH 7110 tractor equipped with a Westendorf TA 46 front-end loader. It has almost 7,000 hours on it with very few problems, and the engine has never been touched. We use this tractor to pull our sprayer. Until recently it was the main pulling tractor on our farm. It came equipped with a hydraulic-operated seat, but I think an air-operated seat would be far superior. We’ve had very few problems with the Westendorf loader, which is also a best buy.”
“I’m well satisfied with my Case-IH 7110 tractor equipped with a Westendorf TA 46 front-end loader. It has almost 7,000 hours on it with very few problems, and the engine has never been touched. We also use this tractor to pull our sprayer. Until recently it was the main pulling tractor on our farm. It came equipped with a hydraulic-operated seat, but I think an air seat is far superior. We’ve had very few problems with the Westendorf loader, which is also a best buy.”
“I recently purchased a Westendorf TA46 loader, after owning a Westendorf TA42 loader for 14 years. I never touched the TA42 with a welder except to replace a worn out tooth on the bucket. I put the TA46 on a different tractor and if it’s as good as the TA42 I’ll be very pleased.”
Mark’s “worst buy” is a DeWalt 358 7 1/2-in. dia. circular saw. “The saw only lasted one month past the warranty before the motor shorted out. I’ll never buy another DeWalt tool again.”
Westendorf (general)
1 Best Buy0 Worst Buys
“I bought a Brush Crusher from Westendorf about a year and a half ago. I’ve already cleared 45 acres of brush and trees.”
Read the whole story →Westendorf 3-pt forklift
1 Best Buy0 Worst Buys“My Westendorf 3-pt. forklift, which I mounted on my Deere 4240 tractor, is my best buy. It has a lift capacity of 3,750 lbs. I’ve used it to unload semi truck loads of seed and to load seed into customers’ trucks.
“My Knight 251 manure spreader is built four times stronger than any other spreader I’ve seen. It’s been trouble-free.
“MyWestfield auger is reasonably priced, well-built, and has a lot of capacity. It runs quiet.”
Westendorf Brush Crusher grapple
1 Best Buy0 Worst BuysDavis says the Westendorf Brush Crusher grapple he mounted on his Kubota front-end loader is “like adding fingers to my loader. It’ll handle everything from brush to logs, fence posts, and debris. We use it to cut firewood, pile brush, and load logs onto a bandsaw mill.”
Westendorf Brush Grabber
0 Best Buys1 Worst Buy“My 2009 Westendorf Brush Grabber is my worst buy. I called the company and they sent me a detailed dimension sheet to fill out, which I did. However, the machine they delivered was different than what I had filled out on the dimension sheet. I called the company to complain but got no response. I made some shims and got the unit to work somewhat. However, it took a lot of time.”
Westendorf Freedom Mount 550 tractor loader
1 Best Buy0 Worst BuysMerrill likes the Westendorf Freedom Mount 550 tractor loader he purchased in 1999. “It’s well-built and easy to mount and dismount. It will withstand many years of hard use. I think it will outlast Case IH loaders.”
Westendorf T 110 front-end loader
1 Best Buy0 Worst Buys“I have five Ford vehicles and all but one have more than 100,000 miles on them. The accumulated mileage on them is more than 766,000 miles. The oldest is our 1980 Ford F-150 4-WD pickup equipped with a straight 6-cylinder engine and 4-speed transmission. It has more than 130,000 miles on it. I use it for fencing and general repair work. I also have a 1996 F-250 4-WD pickup equipped with a 5.0-liter engine and 5-speed transmission. It has more than 78,000 miles on it. We use it to haul cattle and large loads.
“I have two Ford Escorts. The oldest is a 1992 model with more than 210,000 miles on it and it’s still running strong. My son drives it every day to work. My 1998 Escort has more than 148,000 miles on it. I drive it every day and average more than 38 mpg. My wife drives our 1993 4-WD Explorer every day. It’s equipped with a 4.0-liter engine and 5-speed transmission, and it just passed the 200,000 mile mark. Recently I’ve had to spend some money on repairs to the transmission. I also had to have the electronic 4 by 4 motor and the clutch and pressure plate replaced. It also needed other minor repairs.
“I do most of my own maintenance such as oil changes, tire rotation, and minor repairs. I use only Motorcraft oil and filters on all my vehicles.
“I have a Ford 1710 4-WD tractor equipped with a Westendorf T 110 front-end loader which I really like. This tractor has more than 650 hours on it. I use it every day on my farm to haul bales and wood, rake hay, plant crops, and cut brush. We use two other Ford tractors on our farm. Both are diesel powered and have more than 3,000 hours on them.”
Westendorf TA-28 loader
1 Best Buy0 Worst Buys“My 1997 White 6105 front wheel assist tractor is my best buy. It has a nice smooth transmission, starts excellent even in cold weather, and pulls through the muddiest part of my feedlot without even spinning a tire. The cab has a lot of glass so I have a great view when doing loader work. The Westendorf TA-28 loader on it is also a best buy. The main loader booms are low enough that they don’t interfere with my vision.
“My 1996 GM Sierra 4-WD shortbed pickup is a best buy. It has never failed me after 25,000 miles. Our last two winters have been very fierce with a lot of snow and cold, but the 305 cu. in. Vortec engine always started right up even though we never used an engine heater or parked it inside a building. I think GM and Chevy make the best pickups on the market.
“My worst buy is my 1981 Deutz DX90 front wheel assist tractor. One problem was that it starts hard in cold weather. The engine has a lot of power - Deutz engines are built strong and you can expect many years of use out of them. I also had a lot of problems with the front part of the power train which cost me a lot of down time and money. On the positive side, the Westendorf WL44 loader that came with it has been trouble-free. This company makes the best front-end loaders on the market.”
Westendorf WL-42 front-end loader
1 Best Buy0 Worst Buys“My most recent best buys have been used machinery. My Mac Don 4000 windrower runs smooth, is easy to adjust and maintain. It also does a superior job of conditioning hay.
“My Westendorf WL-42 front-end loader is built heavy and goes on and off the tractor easily. The quick-tach bucket allows for many different attachments like a bale fork or pallet fork to be used easily.
“My 1999 Corn Pro 25 plus 5 tandem dually gooseneck flatbed trailer is my worst buy. After about 1 1/2 years I noticed that it leaned to one side. Further inspection revealed that a bent I beam was used in the main frame. I could tell it was bent because the horizontal channels weren’t even touching the I beam when it was welded together. The assemblers at the factory had to have seen this, also. The fact that they still put it together and rolled it out the door shows me they have virtually no quality control. They did a nice job of painting this trailer, but I think a high school shop class could have done a better job of selecting materials and welding them together.
“I complained to the company but it didn’t help. They seem to have a policy of not talking to their customers or their dealers. That’s a convenient policy to have when you build substandard equipment.”
Westendorf WL44 loader
1 Best Buy0 Worst Buys“My 1997 White 6105 front wheel assist tractor is my best buy. It has a nice smooth transmission, starts excellent even in cold weather, and pulls through the muddiest part of my feedlot without even spinning a tire. The cab has a lot of glass so I have a great view when doing loader work. The Westendorf TA-28 loader on it is also a best buy. The main loader booms are low enough that they don’t interfere with my vision.
“My 1996 GM Sierra 4-WD shortbed pickup is a best buy. It has never failed me after 25,000 miles. Our last two winters have been very fierce with a lot of snow and cold, but the 305 cu. in. Vortec engine always started right up even though we never used an engine heater or parked it inside a building. I think GM and Chevy make the best pickups on the market.
“My worst buy is my 1981 Deutz DX90 front wheel assist tractor. One problem was that it starts hard in cold weather. The engine has a lot of power - Deutz engines are built strong and you can expect many years of use out of them. I also had a lot of problems with the front part of the power train which cost me a lot of down time and money. On the positive side, the Westendorf WL44 loader that came with it has been trouble-free. This company makes the best front-end loaders on the market.”
Westendorf loader far outperforms
1 Best Buy0 Worst BuysKlay’s impressed with his Haybuster 256 3-pt. bale shredder. “We bought it five years ago to use on my Dad’s ranch where we feed about 1,000 head of cattle every winter. It’s one of the best investments we’ve ever made. We shred 2,000 to 3,000 bales with it every year. Hay comes out of the machine in a windrow and the cattle lick up every bit of it with very little waste. There’s far less waste than unrolling a bale on the ground and having the cattle tromp on the hay. It also works great for putting bedding in our feedlot. When we flip the shield up straw flies out and makes a nice even layer on the ground. It has cut the amount of straw we use for bedding in half.”
On the “worst buy” side, he nominates his 1998 Leon 707 front-end loader. “The quick-tach mounting system on it is no good -there’s too much play on the bucket. The ears on the loader arms, where the bucket cylinders mount, are cracked on one side and completely broken off on the other side. The pin mounts that attach the loader to the tractor are already cracked. Our 20-year-old Westendorf loader far outperforms this one.”
Westendorf loader-mounted bale spear
1 Best Buy0 Worst Buys“It seemed like my wife was always using our Polaris 300 4-wheeler ATV when I wanted to use it, so I bought another 2-WD model. No problems with either one. I like the full floorboards and automatic transmission. I also like not having to change oil. “My Westendorf loader-mounted bale spear is a best buy. I’ve used it to move hundreds of big bales with no problems. I like the quick tach feature on all the company’s loaders and buckets.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.