Sears Craftsman chainsaw equipped
What FARM SHOW readers say · 11 Best Buys3 Worst Buys · Chainsaws & Saws
Sears Craftsman chainsaw equipped
11 Best Buys3 Worst BuysSteve’s 1991 Dodge pickup equipped with a Cummins diesel engine has more than 300,000 miles on it but is still going strong. “I replaced the transmission at about 200,000 miles. Otherwise this pickup has required only routine maintenance.
“My 2017 AGCO LT90 tractor equipped with a Cummins diesel engine just turned over 10,000 hrs. I’ve spent little money on this tractor, mainly for oil and tires.”
He’s had problems with his 2017 Sears Craftsman chainsaw equipped with an 18-in. bar. “The engine won’t idle whenever I set it down. The store where I bought the saw finally gave me a voucher card, but I used it to buy tools instead of another saw.”
Duane’s satisfied with his 2006 Ford F-350 4-WD crew cab pickup equipped with a 6.0-liter diesel engine and an 8-ft. bed, which he bought used with about 99,500 miles.
“I had to replace the oil cooler and the turbocharger needed work, but overall I love this pickup’s power and ride. It’s fun to drive as long as I don’t have to park in tight spaces. The crew cab is wonderful and has plenty of room for my hand tools and parts. And as a contractor, I have a lot of tools and parts to carry.
“My wife and I bought a Sears Craftsman 42-in. riding mower equipped with a 19 1/2 hp engine and hydrostatic transmission. I like not having to stand on a foot pedal to keep moving. Instead, I just put my feet on the floorboard and use the clutch only as a panic button.
“All I’ve done is change the oil, blades, drive belt, battery and recently the starter solenoid. I think ethanol is bad for small engines, but that’s almost all I’ve used in this mower yet it always starts right up. The only problem is that its ground-driven belt seems to wear out and slip prematurely. If the company had used the same hydraulic drive transmission that IH uses in its Cub Cadet tractor, this would be a fantastic machine.”
Jack’s impressed with his 2007 Sears Craftsman riding mower equipped with a 42-in. deck and 18 hp Briggs & Stratton engine. “I’ve worked the heck out of this mower but it just keeps on running. We live on 1 1/2 acres in dryland wheat country and mow everything on it, even going right over gopher mounds. I change the blades twice a year and all is good. It was a great buy at $999.”
“I use it to mow 4 acres on my property, along with neighbors’ lawns. It has required only routine maintenance,” says Darrel about his 2009 Sears Craftsman riding mower equipped with a 20 hp engine and 46-in. deck.
In 2011, Don bought an Italian-built Harvester BCS-718 rear tine garden tiller. “It runs okay but it’s hard to keep the machine where I want it. The tines are only as wide as the drive wheels, which make it hard to keep it from sliding off into the soil I’ve already tilled. The tines should extend 3 to 4 in. beyond the wheels, which would make the machine easier to handle. Also, the handles should be higher so my back wouldn’t ache from having to bend over so far.”
“My 1999 Sears Craftsman lawn tractor equipped with a 20.5 hp, 2-cyl. Briggs & Stratton engine and 42-in. mower deck came with an extended warranty. The company replaced blades and belts as required, changed the oil, replaced a faulty carburetor, and replaced the batteries at no charge during warranty. I use it to cut at least one acre of lawn around farm buildings and to mow down tall weeds and small brush in the surrounding area. Over the years I’ve used about six different riding mowers, but this is by far the best one.”
“I haven’t spent one penny on repairs,” says Jerry about his 2001 Sears Craftsman riding mower equipped with a 22 hp, V-twin, Kohler Pro engine, automatic transmission, and 50-in. deck. “I use it to cut four acres every week. It still has the original blades and belts.”
“My 1968 Chevrolet WT 1500 pickup equipped with a Vortec V-6 engine and automatic transmission is my best buy. I bought it used with a lot of miles on it and replaced the brake rotors, pads, drums and shoes. Now it has more than 170,000 miles on it but still doesn’t use any oil. It has a smooth ride.
“My 2000 Sears Craftsman lawn tractor equipped with a 23 1/2 hp Kohler engine and 60-in. deck has had a lot of problems. Fortunately, I purchased a maintenance contract when I bought the mower. The deck had to be replaced, as well as the rear end, transmission, battery, fuse, and blades. A blade shaft snapped off at the bearing. Now the juncture of the fender assembly is splitting under the seat where it joins the frame. It’s impossible to mow evenly. Also, the entire front axle and steering rod had to be replaced.”
A 2002 Sears Craftsman riding mower equipped with an automatic transmission and 48-in. deck rates as Royal’s “worst buy.” “The day I brought it home I was setting it up when the spring to the neutral shift rod came off and wouldn’t stay on. Also, the electric clutch that controls the blade engagement locks and won’t engage the blade. It happens every time I use the mower. The deck has to be cleaned often so I can keep it running. The transmission is so weak that in reverse gear the mower will barely back up on level ground. However, the engine does have a lot of power and starts and runs good.
“The deck is mounted too low. I’ve adjusted it according to the owner’s manual, but even with the adjustment lever at its highest level, the bottom of the deck is only about three inches above the ground. If the deck didn’t have four anti-scalping wheels I think it could be lowered all the way to below-ground level. Another problem is that the magnet holding the hood down came off within the first couple of hours of use.
“I’ve owned Sears Craftsman equipment for many years, but lately I’ve found their products to be weak and poorly made. My Craftsman rototiller had such flimsy handles that the tubing around the welds broke during the first season of use.”
A 2002 Sears Craftsman garden tractor equipped with a 23 hp engine and 48-in. deck rates as John’s “best buy.” “I use it to cut 15 acres and it never causes any problems. I also use it to pull up to 1,000 lbs. of firewood on an old airport luggage cart. I bought it with an extended warranty, which was cheaper and better than what Home Depot and Lowe’s were offering with their garden tractors.”
“My 2001 Sears Craftsman garden tractor equipped with a 17 1/2 hp engine and a 42-in. mower deck has performed well, except for problems with the front axle and the spindle on the left front wheel. The axle literally broke in half due to metal that was too thin, and the left front spindle housing split due to poor factory welds. The spindle had worn 1/8 in. at the bottom. I was told the company’s replacement axles were built heavier so I ordered a complete new axle. To my dismay, I discovered that it was an identical replacement and didn’t use it. Instead, I rebuilt the broken axle by clamping it back together and welding it properly. At the same time, I welded two 3/8-in. lengths of rebar onto the bottom side of the axle to make it stronger than new.
“The tractor’s front wheels have what are called friction bearings, although I don’t consider them bearings because even with regular greasing, the left front spindle wore excessively on the lower side. I welded and built up the worn area, then machined it so the wheel would fit on properly. After six months of use I’m now satisfied with this machine. The front axle and spindle were the only problems I’ve experienced with it. I told Sears I now know why they call their machines ‘Craftsman’. It’s because the customer has to be a craftsman just to keep them going.
“Would I buy another Sears Craftsman garden tractor? Since I know how to repair their weak points, I probably would, if I could buy the machine at a discount. We have a 1996 Sears Craftsman garden tractor equipped with a 13 hp Briggs & Stratton engine and a 42-in. deck that has been trouble-free. It has a better built front axle, but that axle won’t fit the 2001 model.”
“My worst buy ever was a 1998 Sears Craftsman garden tractor equipped with a 42-in. mower deck and powered by a 15 1/2 hp Briggs & Stratton single cylinder gas engine. Two weeks after I bought it all the tires started losing air. Rather than traveling 45 miles one way to take the mower back to Sears, I installed tubes in all the tires. Then three weeks later the bracket that holds the bagger started to bend backward, which caused the bags to fall off the rear. I had to weld on a triangulated brace to fix it.
“The carburetor slowly leaked gas past the float valve and into the combustion chamber, which caused a hydrostatic lock. I had to remove the spark plug to drain the gas out so I could start it again. I also had to change the oil often because it was diluted with gas. I solved this problem by installing a fuel shutoff valve in the line.
“As for Briggs & Stratton engines, they’re among my worst buys, too. They used to be pretty good but not any more. I have a pressure washer equipped with an 11 hp Briggs & Stratton engine and a generator with an 8 hp Briggs & Stratton engine. On both machines, after the engines run for a few minutes the recoil starters lock up and rip the ropes right out of the housings.”
Douglas likes his Drill Doctor drill bit sharpener. “It’s user friendly and works just like the company said it would.
“I like my Sears Craftsman garden tractor equipped with a 42-in. mower. The deck is nice and level, the automatic transmission works great, all the controls are within reach, and it steers easy. The Briggs & Stratton 19 1/2 hp Twin-Turbo gas engine is smooth and vibrates very little compared to a single cylinder engine. All these features are a definite plus to someone who has arthritis. It’s built a lot like a ‘real’ tractor.
“All my Ford vehicles have been best buys, including ten cars, six pickups, four grain trucks, two full-size conversion vans, an Explorer, a Windstar van, and three tractors. I’ve used other brands, but in the end I’ve been much more satisfied with the performance of Ford products. The only real problem is that when I want to buy a used Ford, it’s hard to find one for sale.”
“It’s a great performer,” says Johnie about his Sears Craftsman riding mower equipped with an 18 1/2 hp twin cylinder Kohler Magnum gas engine. “It makes a 46-in. wide cut. I also like my Sears air compressor.
“My 1997 Ford F-150 pickup equipped with a 4.6-liter V-8 engine and automatic transmission is a best buy.”
“It’s a fantastic machine,” says Matthew about his 1987 Sears Craftsman 38-in. riding mower equipped with a 14 hp Briggs & Stratton gas engine and 5-speed transmission. “It has a lot of torque and is easy on fuel. I installed a bucket seat from a Datsun car which greatly improved the ride. I built my own trailer and sled for it, as well as an aerator, drag, and clippings collector. I pull a 40-in. harrow behind it to seed grass.”
Own a Sears Craftsman? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.